3 * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]
5 * Extended 3 / 2005 by Hartmut Hackmann to support various
6 * cards with the tda10046 DVB-T channel decoder
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
23 #include <linux/init.h>
24 #include <linux/list.h>
25 #include <linux/module.h>
26 #include <linux/kernel.h>
27 #include <linux/slab.h>
28 #include <linux/delay.h>
29 #include <linux/kthread.h>
30 #include <linux/suspend.h>
32 #include "saa7134-reg.h"
34 #include <media/v4l2-common.h>
36 #include <dvb_frontend.h>
39 #include "mt352_priv.h" /* FIXME */
42 #include "tuner-xc2028.h"
50 #include "tuner-simple.h"
54 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]");
55 MODULE_LICENSE("GPL");
57 static unsigned int antenna_pwr
;
59 module_param(antenna_pwr
, int, 0444);
60 MODULE_PARM_DESC(antenna_pwr
,"enable antenna power (Pinnacle 300i)");
62 static int use_frontend
;
63 module_param(use_frontend
, int, 0644);
64 MODULE_PARM_DESC(use_frontend
,"for cards with multiple frontends (0: terrestrial, 1: satellite)");
67 module_param(debug
, int, 0644);
68 MODULE_PARM_DESC(debug
, "Turn on/off module debugging (default:off).");
70 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr
);
72 #define dprintk(fmt, arg...) do { if (debug) \
73 printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0)
76 #define wprintk(fmt, arg...) \
77 printk(KERN_WARNING "%s/dvb: " fmt, dev->name, ## arg)
79 /* ------------------------------------------------------------------
80 * mt352 based DVB-T cards
83 static int pinnacle_antenna_pwr(struct saa7134_dev
*dev
, int on
)
88 saa_setl(SAA7134_GPIO_GPMODE0
>> 2, (1 << 26));
89 saa_clearl(SAA7134_GPIO_GPSTATUS0
>> 2, (1 << 26));
93 saa_setl(SAA7134_GPIO_GPMODE0
>> 2, (1 << 26));
94 saa_setl(SAA7134_GPIO_GPSTATUS0
>> 2, (1 << 26));
97 saa_setl(SAA7134_GPIO_GPMODE0
>> 2, (1 << 28));
98 saa_clearl(SAA7134_GPIO_GPSTATUS0
>> 2, (1 << 28));
100 saa_setl(SAA7134_GPIO_GPSTATUS0
>> 2, (1 << 28));
102 ok
= saa_readl(SAA7134_GPIO_GPSTATUS0
) & (1 << 27);
103 dprintk("%s %s\n", __func__
, ok
? "on" : "off");
106 saa_clearl(SAA7134_GPIO_GPSTATUS0
>> 2, (1 << 26));
110 static int mt352_pinnacle_init(struct dvb_frontend
* fe
)
112 static u8 clock_config
[] = { CLOCK_CTL
, 0x3d, 0x28 };
113 static u8 reset
[] = { RESET
, 0x80 };
114 static u8 adc_ctl_1_cfg
[] = { ADC_CTL_1
, 0x40 };
115 static u8 agc_cfg
[] = { AGC_TARGET
, 0x28, 0xa0 };
116 static u8 capt_range_cfg
[] = { CAPT_RANGE
, 0x31 };
117 static u8 fsm_ctl_cfg
[] = { 0x7b, 0x04 };
118 static u8 gpp_ctl_cfg
[] = { GPP_CTL
, 0x0f };
119 static u8 scan_ctl_cfg
[] = { SCAN_CTL
, 0x0d };
120 static u8 irq_cfg
[] = { INTERRUPT_EN_0
, 0x00, 0x00, 0x00, 0x00 };
121 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
123 dprintk("%s called\n", __func__
);
125 mt352_write(fe
, clock_config
, sizeof(clock_config
));
127 mt352_write(fe
, reset
, sizeof(reset
));
128 mt352_write(fe
, adc_ctl_1_cfg
, sizeof(adc_ctl_1_cfg
));
129 mt352_write(fe
, agc_cfg
, sizeof(agc_cfg
));
130 mt352_write(fe
, capt_range_cfg
, sizeof(capt_range_cfg
));
131 mt352_write(fe
, gpp_ctl_cfg
, sizeof(gpp_ctl_cfg
));
133 mt352_write(fe
, fsm_ctl_cfg
, sizeof(fsm_ctl_cfg
));
134 mt352_write(fe
, scan_ctl_cfg
, sizeof(scan_ctl_cfg
));
135 mt352_write(fe
, irq_cfg
, sizeof(irq_cfg
));
140 static int mt352_aver777_init(struct dvb_frontend
* fe
)
142 static u8 clock_config
[] = { CLOCK_CTL
, 0x38, 0x2d };
143 static u8 reset
[] = { RESET
, 0x80 };
144 static u8 adc_ctl_1_cfg
[] = { ADC_CTL_1
, 0x40 };
145 static u8 agc_cfg
[] = { AGC_TARGET
, 0x28, 0xa0 };
146 static u8 capt_range_cfg
[] = { CAPT_RANGE
, 0x33 };
148 mt352_write(fe
, clock_config
, sizeof(clock_config
));
150 mt352_write(fe
, reset
, sizeof(reset
));
151 mt352_write(fe
, adc_ctl_1_cfg
, sizeof(adc_ctl_1_cfg
));
152 mt352_write(fe
, agc_cfg
, sizeof(agc_cfg
));
153 mt352_write(fe
, capt_range_cfg
, sizeof(capt_range_cfg
));
158 static int mt352_avermedia_xc3028_init(struct dvb_frontend
*fe
)
160 static u8 clock_config
[] = { CLOCK_CTL
, 0x38, 0x2d };
161 static u8 reset
[] = { RESET
, 0x80 };
162 static u8 adc_ctl_1_cfg
[] = { ADC_CTL_1
, 0x40 };
163 static u8 agc_cfg
[] = { AGC_TARGET
, 0xe };
164 static u8 capt_range_cfg
[] = { CAPT_RANGE
, 0x33 };
166 mt352_write(fe
, clock_config
, sizeof(clock_config
));
168 mt352_write(fe
, reset
, sizeof(reset
));
169 mt352_write(fe
, adc_ctl_1_cfg
, sizeof(adc_ctl_1_cfg
));
170 mt352_write(fe
, agc_cfg
, sizeof(agc_cfg
));
171 mt352_write(fe
, capt_range_cfg
, sizeof(capt_range_cfg
));
175 static int mt352_pinnacle_tuner_set_params(struct dvb_frontend
* fe
,
176 struct dvb_frontend_parameters
* params
)
178 u8 off
[] = { 0x00, 0xf1};
179 u8 on
[] = { 0x00, 0x71};
180 struct i2c_msg msg
= {.addr
=0x43, .flags
=0, .buf
=off
, .len
= sizeof(off
)};
182 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
183 struct v4l2_frequency f
;
185 /* set frequency (mt2050) */
187 f
.type
= V4L2_TUNER_DIGITAL_TV
;
188 f
.frequency
= params
->frequency
/ 1000 * 16 / 1000;
189 if (fe
->ops
.i2c_gate_ctrl
)
190 fe
->ops
.i2c_gate_ctrl(fe
, 1);
191 i2c_transfer(&dev
->i2c_adap
, &msg
, 1);
192 saa7134_i2c_call_clients(dev
,VIDIOC_S_FREQUENCY
,&f
);
194 if (fe
->ops
.i2c_gate_ctrl
)
195 fe
->ops
.i2c_gate_ctrl(fe
, 1);
196 i2c_transfer(&dev
->i2c_adap
, &msg
, 1);
198 pinnacle_antenna_pwr(dev
, antenna_pwr
);
201 return mt352_pinnacle_init(fe
);
204 static struct mt352_config pinnacle_300i
= {
205 .demod_address
= 0x3c >> 1,
209 .demod_init
= mt352_pinnacle_init
,
212 static struct mt352_config avermedia_777
= {
213 .demod_address
= 0xf,
214 .demod_init
= mt352_aver777_init
,
217 static struct mt352_config avermedia_xc3028_mt352_dev
= {
218 .demod_address
= (0x1e >> 1),
220 .demod_init
= mt352_avermedia_xc3028_init
,
223 /* ==================================================================
224 * tda1004x based DVB-T cards, helper functions
227 static int philips_tda1004x_request_firmware(struct dvb_frontend
*fe
,
228 const struct firmware
**fw
, char *name
)
230 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
231 return request_firmware(fw
, name
, &dev
->pci
->dev
);
234 /* ------------------------------------------------------------------
235 * these tuners are tu1216, td1316(a)
238 static int philips_tda6651_pll_set(struct dvb_frontend
*fe
, struct dvb_frontend_parameters
*params
)
240 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
241 struct tda1004x_state
*state
= fe
->demodulator_priv
;
242 u8 addr
= state
->config
->tuner_address
;
244 struct i2c_msg tuner_msg
= {.addr
= addr
,.flags
= 0,.buf
= tuner_buf
,.len
=
246 int tuner_frequency
= 0;
249 /* determine charge pump */
250 tuner_frequency
= params
->frequency
+ 36166000;
251 if (tuner_frequency
< 87000000)
253 else if (tuner_frequency
< 130000000)
255 else if (tuner_frequency
< 160000000)
257 else if (tuner_frequency
< 200000000)
259 else if (tuner_frequency
< 290000000)
261 else if (tuner_frequency
< 420000000)
263 else if (tuner_frequency
< 480000000)
265 else if (tuner_frequency
< 620000000)
267 else if (tuner_frequency
< 830000000)
269 else if (tuner_frequency
< 895000000)
275 if (params
->frequency
< 49000000)
277 else if (params
->frequency
< 161000000)
279 else if (params
->frequency
< 444000000)
281 else if (params
->frequency
< 861000000)
286 /* setup PLL filter */
287 switch (params
->u
.ofdm
.bandwidth
) {
288 case BANDWIDTH_6_MHZ
:
292 case BANDWIDTH_7_MHZ
:
296 case BANDWIDTH_8_MHZ
:
305 * ((36166000+((1000000/6)/2)) + Finput)/(1000000/6)
307 tuner_frequency
= (((params
->frequency
/ 1000) * 6) + 217496) / 1000;
309 /* setup tuner buffer */
310 tuner_buf
[0] = (tuner_frequency
>> 8) & 0x7f;
311 tuner_buf
[1] = tuner_frequency
& 0xff;
313 tuner_buf
[3] = (cp
<< 5) | (filter
<< 3) | band
;
315 if (fe
->ops
.i2c_gate_ctrl
)
316 fe
->ops
.i2c_gate_ctrl(fe
, 1);
317 if (i2c_transfer(&dev
->i2c_adap
, &tuner_msg
, 1) != 1) {
318 wprintk("could not write to tuner at addr: 0x%02x\n",
326 static int philips_tu1216_init(struct dvb_frontend
*fe
)
328 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
329 struct tda1004x_state
*state
= fe
->demodulator_priv
;
330 u8 addr
= state
->config
->tuner_address
;
331 static u8 tu1216_init
[] = { 0x0b, 0xf5, 0x85, 0xab };
332 struct i2c_msg tuner_msg
= {.addr
= addr
,.flags
= 0,.buf
= tu1216_init
,.len
= sizeof(tu1216_init
) };
334 /* setup PLL configuration */
335 if (fe
->ops
.i2c_gate_ctrl
)
336 fe
->ops
.i2c_gate_ctrl(fe
, 1);
337 if (i2c_transfer(&dev
->i2c_adap
, &tuner_msg
, 1) != 1)
344 /* ------------------------------------------------------------------ */
346 static struct tda1004x_config philips_tu1216_60_config
= {
347 .demod_address
= 0x8,
350 .xtal_freq
= TDA10046_XTAL_4M
,
351 .agc_config
= TDA10046_AGC_DEFAULT
,
352 .if_freq
= TDA10046_FREQ_3617
,
353 .tuner_address
= 0x60,
354 .request_firmware
= philips_tda1004x_request_firmware
357 static struct tda1004x_config philips_tu1216_61_config
= {
359 .demod_address
= 0x8,
362 .xtal_freq
= TDA10046_XTAL_4M
,
363 .agc_config
= TDA10046_AGC_DEFAULT
,
364 .if_freq
= TDA10046_FREQ_3617
,
365 .tuner_address
= 0x61,
366 .request_firmware
= philips_tda1004x_request_firmware
369 /* ------------------------------------------------------------------ */
371 static int philips_td1316_tuner_init(struct dvb_frontend
*fe
)
373 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
374 struct tda1004x_state
*state
= fe
->demodulator_priv
;
375 u8 addr
= state
->config
->tuner_address
;
376 static u8 msg
[] = { 0x0b, 0xf5, 0x86, 0xab };
377 struct i2c_msg init_msg
= {.addr
= addr
,.flags
= 0,.buf
= msg
,.len
= sizeof(msg
) };
379 /* setup PLL configuration */
380 if (fe
->ops
.i2c_gate_ctrl
)
381 fe
->ops
.i2c_gate_ctrl(fe
, 1);
382 if (i2c_transfer(&dev
->i2c_adap
, &init_msg
, 1) != 1)
387 static int philips_td1316_tuner_set_params(struct dvb_frontend
*fe
, struct dvb_frontend_parameters
*params
)
389 return philips_tda6651_pll_set(fe
, params
);
392 static int philips_td1316_tuner_sleep(struct dvb_frontend
*fe
)
394 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
395 struct tda1004x_state
*state
= fe
->demodulator_priv
;
396 u8 addr
= state
->config
->tuner_address
;
397 static u8 msg
[] = { 0x0b, 0xdc, 0x86, 0xa4 };
398 struct i2c_msg analog_msg
= {.addr
= addr
,.flags
= 0,.buf
= msg
,.len
= sizeof(msg
) };
400 /* switch the tuner to analog mode */
401 if (fe
->ops
.i2c_gate_ctrl
)
402 fe
->ops
.i2c_gate_ctrl(fe
, 1);
403 if (i2c_transfer(&dev
->i2c_adap
, &analog_msg
, 1) != 1)
408 /* ------------------------------------------------------------------ */
410 static int philips_europa_tuner_init(struct dvb_frontend
*fe
)
412 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
413 static u8 msg
[] = { 0x00, 0x40};
414 struct i2c_msg init_msg
= {.addr
= 0x43,.flags
= 0,.buf
= msg
,.len
= sizeof(msg
) };
417 if (philips_td1316_tuner_init(fe
))
420 if (i2c_transfer(&dev
->i2c_adap
, &init_msg
, 1) != 1)
426 static int philips_europa_tuner_sleep(struct dvb_frontend
*fe
)
428 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
430 static u8 msg
[] = { 0x00, 0x14 };
431 struct i2c_msg analog_msg
= {.addr
= 0x43,.flags
= 0,.buf
= msg
,.len
= sizeof(msg
) };
433 if (philips_td1316_tuner_sleep(fe
))
436 /* switch the board to analog mode */
437 if (fe
->ops
.i2c_gate_ctrl
)
438 fe
->ops
.i2c_gate_ctrl(fe
, 1);
439 i2c_transfer(&dev
->i2c_adap
, &analog_msg
, 1);
443 static int philips_europa_demod_sleep(struct dvb_frontend
*fe
)
445 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
447 if (dev
->original_demod_sleep
)
448 dev
->original_demod_sleep(fe
);
449 fe
->ops
.i2c_gate_ctrl(fe
, 1);
453 static struct tda1004x_config philips_europa_config
= {
455 .demod_address
= 0x8,
458 .xtal_freq
= TDA10046_XTAL_4M
,
459 .agc_config
= TDA10046_AGC_IFO_AUTO_POS
,
460 .if_freq
= TDA10046_FREQ_052
,
461 .tuner_address
= 0x61,
462 .request_firmware
= philips_tda1004x_request_firmware
465 static struct tda1004x_config medion_cardbus
= {
466 .demod_address
= 0x08,
469 .xtal_freq
= TDA10046_XTAL_16M
,
470 .agc_config
= TDA10046_AGC_IFO_AUTO_NEG
,
471 .if_freq
= TDA10046_FREQ_3613
,
472 .tuner_address
= 0x61,
473 .request_firmware
= philips_tda1004x_request_firmware
476 /* ------------------------------------------------------------------
477 * tda 1004x based cards with philips silicon tuner
480 static int tda8290_i2c_gate_ctrl( struct dvb_frontend
* fe
, int enable
)
482 struct tda1004x_state
*state
= fe
->demodulator_priv
;
484 u8 addr
= state
->config
->i2c_gate
;
485 static u8 tda8290_close
[] = { 0x21, 0xc0};
486 static u8 tda8290_open
[] = { 0x21, 0x80};
487 struct i2c_msg tda8290_msg
= {.addr
= addr
,.flags
= 0, .len
= 2};
489 tda8290_msg
.buf
= tda8290_close
;
491 tda8290_msg
.buf
= tda8290_open
;
493 if (i2c_transfer(state
->i2c
, &tda8290_msg
, 1) != 1) {
494 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
495 wprintk("could not access tda8290 I2C gate\n");
502 static int philips_tda827x_tuner_init(struct dvb_frontend
*fe
)
504 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
505 struct tda1004x_state
*state
= fe
->demodulator_priv
;
507 switch (state
->config
->antenna_switch
) {
509 case 1: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
510 saa7134_set_gpio(dev
, 21, 0);
512 case 2: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
513 saa7134_set_gpio(dev
, 21, 1);
519 static int philips_tda827x_tuner_sleep(struct dvb_frontend
*fe
)
521 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
522 struct tda1004x_state
*state
= fe
->demodulator_priv
;
524 switch (state
->config
->antenna_switch
) {
526 case 1: dprintk("setting GPIO21 to 1 (Radio antenna?)\n");
527 saa7134_set_gpio(dev
, 21, 1);
529 case 2: dprintk("setting GPIO21 to 0 (TV antenna?)\n");
530 saa7134_set_gpio(dev
, 21, 0);
536 static int configure_tda827x_fe(struct saa7134_dev
*dev
,
537 struct tda1004x_config
*cdec_conf
,
538 struct tda827x_config
*tuner_conf
)
540 struct videobuf_dvb_frontend
*fe0
;
542 /* Get the first frontend */
543 fe0
= videobuf_dvb_get_frontend(&dev
->frontends
, 1);
545 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
, cdec_conf
, &dev
->i2c_adap
);
546 if (fe0
->dvb
.frontend
) {
547 if (cdec_conf
->i2c_gate
)
548 fe0
->dvb
.frontend
->ops
.i2c_gate_ctrl
= tda8290_i2c_gate_ctrl
;
549 if (dvb_attach(tda827x_attach
, fe0
->dvb
.frontend
,
550 cdec_conf
->tuner_address
,
551 &dev
->i2c_adap
, tuner_conf
))
554 wprintk("no tda827x tuner found at addr: %02x\n",
555 cdec_conf
->tuner_address
);
560 /* ------------------------------------------------------------------ */
562 static struct tda827x_config tda827x_cfg_0
= {
563 .init
= philips_tda827x_tuner_init
,
564 .sleep
= philips_tda827x_tuner_sleep
,
569 static struct tda827x_config tda827x_cfg_1
= {
570 .init
= philips_tda827x_tuner_init
,
571 .sleep
= philips_tda827x_tuner_sleep
,
576 static struct tda827x_config tda827x_cfg_2
= {
577 .init
= philips_tda827x_tuner_init
,
578 .sleep
= philips_tda827x_tuner_sleep
,
583 static struct tda827x_config tda827x_cfg_2_sw42
= {
584 .init
= philips_tda827x_tuner_init
,
585 .sleep
= philips_tda827x_tuner_sleep
,
590 /* ------------------------------------------------------------------ */
592 static struct tda1004x_config tda827x_lifeview_config
= {
593 .demod_address
= 0x08,
596 .xtal_freq
= TDA10046_XTAL_16M
,
597 .agc_config
= TDA10046_AGC_TDA827X
,
598 .gpio_config
= TDA10046_GP11_I
,
599 .if_freq
= TDA10046_FREQ_045
,
600 .tuner_address
= 0x60,
601 .request_firmware
= philips_tda1004x_request_firmware
604 static struct tda1004x_config philips_tiger_config
= {
605 .demod_address
= 0x08,
608 .xtal_freq
= TDA10046_XTAL_16M
,
609 .agc_config
= TDA10046_AGC_TDA827X
,
610 .gpio_config
= TDA10046_GP11_I
,
611 .if_freq
= TDA10046_FREQ_045
,
613 .tuner_address
= 0x61,
615 .request_firmware
= philips_tda1004x_request_firmware
618 static struct tda1004x_config cinergy_ht_config
= {
619 .demod_address
= 0x08,
622 .xtal_freq
= TDA10046_XTAL_16M
,
623 .agc_config
= TDA10046_AGC_TDA827X
,
624 .gpio_config
= TDA10046_GP01_I
,
625 .if_freq
= TDA10046_FREQ_045
,
627 .tuner_address
= 0x61,
628 .request_firmware
= philips_tda1004x_request_firmware
631 static struct tda1004x_config cinergy_ht_pci_config
= {
632 .demod_address
= 0x08,
635 .xtal_freq
= TDA10046_XTAL_16M
,
636 .agc_config
= TDA10046_AGC_TDA827X
,
637 .gpio_config
= TDA10046_GP01_I
,
638 .if_freq
= TDA10046_FREQ_045
,
640 .tuner_address
= 0x60,
641 .request_firmware
= philips_tda1004x_request_firmware
644 static struct tda1004x_config philips_tiger_s_config
= {
645 .demod_address
= 0x08,
648 .xtal_freq
= TDA10046_XTAL_16M
,
649 .agc_config
= TDA10046_AGC_TDA827X
,
650 .gpio_config
= TDA10046_GP01_I
,
651 .if_freq
= TDA10046_FREQ_045
,
653 .tuner_address
= 0x61,
655 .request_firmware
= philips_tda1004x_request_firmware
658 static struct tda1004x_config pinnacle_pctv_310i_config
= {
659 .demod_address
= 0x08,
662 .xtal_freq
= TDA10046_XTAL_16M
,
663 .agc_config
= TDA10046_AGC_TDA827X
,
664 .gpio_config
= TDA10046_GP11_I
,
665 .if_freq
= TDA10046_FREQ_045
,
667 .tuner_address
= 0x61,
668 .request_firmware
= philips_tda1004x_request_firmware
671 static struct tda1004x_config hauppauge_hvr_1110_config
= {
672 .demod_address
= 0x08,
675 .xtal_freq
= TDA10046_XTAL_16M
,
676 .agc_config
= TDA10046_AGC_TDA827X
,
677 .gpio_config
= TDA10046_GP11_I
,
678 .if_freq
= TDA10046_FREQ_045
,
680 .tuner_address
= 0x61,
681 .request_firmware
= philips_tda1004x_request_firmware
684 static struct tda1004x_config asus_p7131_dual_config
= {
685 .demod_address
= 0x08,
688 .xtal_freq
= TDA10046_XTAL_16M
,
689 .agc_config
= TDA10046_AGC_TDA827X
,
690 .gpio_config
= TDA10046_GP11_I
,
691 .if_freq
= TDA10046_FREQ_045
,
693 .tuner_address
= 0x61,
695 .request_firmware
= philips_tda1004x_request_firmware
698 static struct tda1004x_config lifeview_trio_config
= {
699 .demod_address
= 0x09,
702 .xtal_freq
= TDA10046_XTAL_16M
,
703 .agc_config
= TDA10046_AGC_TDA827X
,
704 .gpio_config
= TDA10046_GP00_I
,
705 .if_freq
= TDA10046_FREQ_045
,
706 .tuner_address
= 0x60,
707 .request_firmware
= philips_tda1004x_request_firmware
710 static struct tda1004x_config tevion_dvbt220rf_config
= {
711 .demod_address
= 0x08,
714 .xtal_freq
= TDA10046_XTAL_16M
,
715 .agc_config
= TDA10046_AGC_TDA827X
,
716 .gpio_config
= TDA10046_GP11_I
,
717 .if_freq
= TDA10046_FREQ_045
,
718 .tuner_address
= 0x60,
719 .request_firmware
= philips_tda1004x_request_firmware
722 static struct tda1004x_config md8800_dvbt_config
= {
723 .demod_address
= 0x08,
726 .xtal_freq
= TDA10046_XTAL_16M
,
727 .agc_config
= TDA10046_AGC_TDA827X
,
728 .gpio_config
= TDA10046_GP01_I
,
729 .if_freq
= TDA10046_FREQ_045
,
731 .tuner_address
= 0x60,
732 .request_firmware
= philips_tda1004x_request_firmware
735 static struct tda1004x_config asus_p7131_4871_config
= {
736 .demod_address
= 0x08,
739 .xtal_freq
= TDA10046_XTAL_16M
,
740 .agc_config
= TDA10046_AGC_TDA827X
,
741 .gpio_config
= TDA10046_GP01_I
,
742 .if_freq
= TDA10046_FREQ_045
,
744 .tuner_address
= 0x61,
746 .request_firmware
= philips_tda1004x_request_firmware
749 static struct tda1004x_config asus_p7131_hybrid_lna_config
= {
750 .demod_address
= 0x08,
753 .xtal_freq
= TDA10046_XTAL_16M
,
754 .agc_config
= TDA10046_AGC_TDA827X
,
755 .gpio_config
= TDA10046_GP11_I
,
756 .if_freq
= TDA10046_FREQ_045
,
758 .tuner_address
= 0x61,
760 .request_firmware
= philips_tda1004x_request_firmware
763 static struct tda1004x_config kworld_dvb_t_210_config
= {
764 .demod_address
= 0x08,
767 .xtal_freq
= TDA10046_XTAL_16M
,
768 .agc_config
= TDA10046_AGC_TDA827X
,
769 .gpio_config
= TDA10046_GP11_I
,
770 .if_freq
= TDA10046_FREQ_045
,
772 .tuner_address
= 0x61,
774 .request_firmware
= philips_tda1004x_request_firmware
777 static struct tda1004x_config avermedia_super_007_config
= {
778 .demod_address
= 0x08,
781 .xtal_freq
= TDA10046_XTAL_16M
,
782 .agc_config
= TDA10046_AGC_TDA827X
,
783 .gpio_config
= TDA10046_GP01_I
,
784 .if_freq
= TDA10046_FREQ_045
,
786 .tuner_address
= 0x60,
788 .request_firmware
= philips_tda1004x_request_firmware
791 static struct tda1004x_config twinhan_dtv_dvb_3056_config
= {
792 .demod_address
= 0x08,
795 .xtal_freq
= TDA10046_XTAL_16M
,
796 .agc_config
= TDA10046_AGC_TDA827X
,
797 .gpio_config
= TDA10046_GP01_I
,
798 .if_freq
= TDA10046_FREQ_045
,
800 .tuner_address
= 0x61,
802 .request_firmware
= philips_tda1004x_request_firmware
805 static struct tda1004x_config asus_tiger_3in1_config
= {
806 .demod_address
= 0x0b,
809 .xtal_freq
= TDA10046_XTAL_16M
,
810 .agc_config
= TDA10046_AGC_TDA827X
,
811 .gpio_config
= TDA10046_GP11_I
,
812 .if_freq
= TDA10046_FREQ_045
,
814 .tuner_address
= 0x61,
816 .request_firmware
= philips_tda1004x_request_firmware
819 /* ------------------------------------------------------------------
820 * special case: this card uses saa713x GPIO22 for the mode switch
823 static int ads_duo_tuner_init(struct dvb_frontend
*fe
)
825 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
826 philips_tda827x_tuner_init(fe
);
827 /* route TDA8275a AGC input to the channel decoder */
828 saa7134_set_gpio(dev
, 22, 1);
832 static int ads_duo_tuner_sleep(struct dvb_frontend
*fe
)
834 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
835 /* route TDA8275a AGC input to the analog IF chip*/
836 saa7134_set_gpio(dev
, 22, 0);
837 philips_tda827x_tuner_sleep(fe
);
841 static struct tda827x_config ads_duo_cfg
= {
842 .init
= ads_duo_tuner_init
,
843 .sleep
= ads_duo_tuner_sleep
,
847 static struct tda1004x_config ads_tech_duo_config
= {
848 .demod_address
= 0x08,
851 .xtal_freq
= TDA10046_XTAL_16M
,
852 .agc_config
= TDA10046_AGC_TDA827X
,
853 .gpio_config
= TDA10046_GP00_I
,
854 .if_freq
= TDA10046_FREQ_045
,
855 .tuner_address
= 0x61,
856 .request_firmware
= philips_tda1004x_request_firmware
859 static struct zl10353_config behold_h6_config
= {
860 .demod_address
= 0x1e>>1,
865 /* ==================================================================
866 * tda10086 based DVB-S cards, helper functions
869 static struct tda10086_config flydvbs
= {
870 .demod_address
= 0x0e,
873 .xtal_freq
= TDA10086_XTAL_16M
,
876 static struct tda10086_config sd1878_4m
= {
877 .demod_address
= 0x0e,
880 .xtal_freq
= TDA10086_XTAL_4M
,
883 /* ------------------------------------------------------------------
884 * special case: lnb supply is connected to the gated i2c
887 static int md8800_set_voltage(struct dvb_frontend
*fe
, fe_sec_voltage_t voltage
)
890 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
891 if (fe
->ops
.i2c_gate_ctrl
) {
892 fe
->ops
.i2c_gate_ctrl(fe
, 1);
893 if (dev
->original_set_voltage
)
894 res
= dev
->original_set_voltage(fe
, voltage
);
895 fe
->ops
.i2c_gate_ctrl(fe
, 0);
900 static int md8800_set_high_voltage(struct dvb_frontend
*fe
, long arg
)
903 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
904 if (fe
->ops
.i2c_gate_ctrl
) {
905 fe
->ops
.i2c_gate_ctrl(fe
, 1);
906 if (dev
->original_set_high_voltage
)
907 res
= dev
->original_set_high_voltage(fe
, arg
);
908 fe
->ops
.i2c_gate_ctrl(fe
, 0);
913 static int md8800_set_voltage2(struct dvb_frontend
*fe
, fe_sec_voltage_t voltage
)
915 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
916 u8 wbuf
[2] = { 0x1f, 00 };
918 struct i2c_msg msg
[] = { { .addr
= 0x08, .flags
= 0, .buf
= wbuf
, .len
= 1 },
919 { .addr
= 0x08, .flags
= I2C_M_RD
, .buf
= &rbuf
, .len
= 1 } };
921 if (i2c_transfer(&dev
->i2c_adap
, msg
, 2) != 2)
923 /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */
924 if (voltage
== SEC_VOLTAGE_18
)
925 wbuf
[1] = rbuf
| 0x10;
927 wbuf
[1] = rbuf
& 0xef;
929 i2c_transfer(&dev
->i2c_adap
, msg
, 1);
933 static int md8800_set_high_voltage2(struct dvb_frontend
*fe
, long arg
)
935 struct saa7134_dev
*dev
= fe
->dvb
->priv
;
936 wprintk("%s: sorry can't set high LNB supply voltage from here\n", __func__
);
940 /* ==================================================================
941 * nxt200x based ATSC cards, helper functions
944 static struct nxt200x_config avertvhda180
= {
945 .demod_address
= 0x0a,
948 static struct nxt200x_config kworldatsc110
= {
949 .demod_address
= 0x0a,
952 /* ==================================================================
956 static int dvb_init(struct saa7134_dev
*dev
)
959 int attach_xc3028
= 0;
960 struct videobuf_dvb_frontend
*fe0
;
962 /* FIXME: add support for multi-frontend */
963 mutex_init(&dev
->frontends
.lock
);
964 INIT_LIST_HEAD(&dev
->frontends
.felist
);
966 printk(KERN_INFO
"%s() allocating 1 frontend\n", __func__
);
967 fe0
= videobuf_dvb_alloc_frontend(&dev
->frontends
, 1);
969 printk(KERN_ERR
"%s() failed to alloc\n", __func__
);
973 /* init struct videobuf_dvb */
974 dev
->ts
.nr_bufs
= 32;
975 dev
->ts
.nr_packets
= 32*4;
976 fe0
->dvb
.name
= dev
->name
;
977 videobuf_queue_sg_init(&fe0
->dvb
.dvbq
, &saa7134_ts_qops
,
978 &dev
->pci
->dev
, &dev
->slock
,
979 V4L2_BUF_TYPE_VIDEO_CAPTURE
,
980 V4L2_FIELD_ALTERNATE
,
981 sizeof(struct saa7134_buf
),
984 switch (dev
->board
) {
985 case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL
:
986 dprintk("pinnacle 300i dvb setup\n");
987 fe0
->dvb
.frontend
= dvb_attach(mt352_attach
, &pinnacle_300i
,
989 if (fe0
->dvb
.frontend
) {
990 fe0
->dvb
.frontend
->ops
.tuner_ops
.set_params
= mt352_pinnacle_tuner_set_params
;
993 case SAA7134_BOARD_AVERMEDIA_777
:
994 case SAA7134_BOARD_AVERMEDIA_A16AR
:
995 dprintk("avertv 777 dvb setup\n");
996 fe0
->dvb
.frontend
= dvb_attach(mt352_attach
, &avermedia_777
,
998 if (fe0
->dvb
.frontend
) {
999 dvb_attach(simple_tuner_attach
, fe0
->dvb
.frontend
,
1000 &dev
->i2c_adap
, 0x61,
1001 TUNER_PHILIPS_TD1316
);
1004 case SAA7134_BOARD_AVERMEDIA_A16D
:
1005 dprintk("AverMedia A16D dvb setup\n");
1006 fe0
->dvb
.frontend
= dvb_attach(mt352_attach
,
1007 &avermedia_xc3028_mt352_dev
,
1011 case SAA7134_BOARD_MD7134
:
1012 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1015 if (fe0
->dvb
.frontend
) {
1016 dvb_attach(simple_tuner_attach
, fe0
->dvb
.frontend
,
1017 &dev
->i2c_adap
, medion_cardbus
.tuner_address
,
1018 TUNER_PHILIPS_FMD1216ME_MK3
);
1021 case SAA7134_BOARD_PHILIPS_TOUGH
:
1022 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1023 &philips_tu1216_60_config
,
1025 if (fe0
->dvb
.frontend
) {
1026 fe0
->dvb
.frontend
->ops
.tuner_ops
.init
= philips_tu1216_init
;
1027 fe0
->dvb
.frontend
->ops
.tuner_ops
.set_params
= philips_tda6651_pll_set
;
1030 case SAA7134_BOARD_FLYDVBTDUO
:
1031 case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS
:
1032 if (configure_tda827x_fe(dev
, &tda827x_lifeview_config
,
1033 &tda827x_cfg_0
) < 0)
1034 goto dettach_frontend
;
1036 case SAA7134_BOARD_PHILIPS_EUROPA
:
1037 case SAA7134_BOARD_VIDEOMATE_DVBT_300
:
1038 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1039 &philips_europa_config
,
1041 if (fe0
->dvb
.frontend
) {
1042 dev
->original_demod_sleep
= fe0
->dvb
.frontend
->ops
.sleep
;
1043 fe0
->dvb
.frontend
->ops
.sleep
= philips_europa_demod_sleep
;
1044 fe0
->dvb
.frontend
->ops
.tuner_ops
.init
= philips_europa_tuner_init
;
1045 fe0
->dvb
.frontend
->ops
.tuner_ops
.sleep
= philips_europa_tuner_sleep
;
1046 fe0
->dvb
.frontend
->ops
.tuner_ops
.set_params
= philips_td1316_tuner_set_params
;
1049 case SAA7134_BOARD_VIDEOMATE_DVBT_200
:
1050 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1051 &philips_tu1216_61_config
,
1053 if (fe0
->dvb
.frontend
) {
1054 fe0
->dvb
.frontend
->ops
.tuner_ops
.init
= philips_tu1216_init
;
1055 fe0
->dvb
.frontend
->ops
.tuner_ops
.set_params
= philips_tda6651_pll_set
;
1058 case SAA7134_BOARD_KWORLD_DVBT_210
:
1059 if (configure_tda827x_fe(dev
, &kworld_dvb_t_210_config
,
1060 &tda827x_cfg_2
) < 0)
1061 goto dettach_frontend
;
1063 case SAA7134_BOARD_PHILIPS_TIGER
:
1064 if (configure_tda827x_fe(dev
, &philips_tiger_config
,
1065 &tda827x_cfg_0
) < 0)
1066 goto dettach_frontend
;
1068 case SAA7134_BOARD_PINNACLE_PCTV_310i
:
1069 if (configure_tda827x_fe(dev
, &pinnacle_pctv_310i_config
,
1070 &tda827x_cfg_1
) < 0)
1071 goto dettach_frontend
;
1073 case SAA7134_BOARD_HAUPPAUGE_HVR1110
:
1074 if (configure_tda827x_fe(dev
, &hauppauge_hvr_1110_config
,
1075 &tda827x_cfg_1
) < 0)
1076 goto dettach_frontend
;
1078 case SAA7134_BOARD_ASUSTeK_P7131_DUAL
:
1079 if (configure_tda827x_fe(dev
, &asus_p7131_dual_config
,
1080 &tda827x_cfg_0
) < 0)
1081 goto dettach_frontend
;
1083 case SAA7134_BOARD_FLYDVBT_LR301
:
1084 if (configure_tda827x_fe(dev
, &tda827x_lifeview_config
,
1085 &tda827x_cfg_0
) < 0)
1086 goto dettach_frontend
;
1088 case SAA7134_BOARD_FLYDVB_TRIO
:
1089 if (!use_frontend
) { /* terrestrial */
1090 if (configure_tda827x_fe(dev
, &lifeview_trio_config
,
1091 &tda827x_cfg_0
) < 0)
1092 goto dettach_frontend
;
1093 } else { /* satellite */
1094 fe0
->dvb
.frontend
= dvb_attach(tda10086_attach
, &flydvbs
, &dev
->i2c_adap
);
1095 if (fe0
->dvb
.frontend
) {
1096 if (dvb_attach(tda826x_attach
, fe0
->dvb
.frontend
, 0x63,
1097 &dev
->i2c_adap
, 0) == NULL
) {
1098 wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__
);
1099 goto dettach_frontend
;
1101 if (dvb_attach(isl6421_attach
, fe0
->dvb
.frontend
, &dev
->i2c_adap
,
1102 0x08, 0, 0) == NULL
) {
1103 wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__
);
1104 goto dettach_frontend
;
1109 case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331
:
1110 case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS
:
1111 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1112 &ads_tech_duo_config
,
1114 if (fe0
->dvb
.frontend
) {
1115 if (dvb_attach(tda827x_attach
,fe0
->dvb
.frontend
,
1116 ads_tech_duo_config
.tuner_address
, &dev
->i2c_adap
,
1117 &ads_duo_cfg
) == NULL
) {
1118 wprintk("no tda827x tuner found at addr: %02x\n",
1119 ads_tech_duo_config
.tuner_address
);
1120 goto dettach_frontend
;
1123 wprintk("failed to attach tda10046\n");
1125 case SAA7134_BOARD_TEVION_DVBT_220RF
:
1126 if (configure_tda827x_fe(dev
, &tevion_dvbt220rf_config
,
1127 &tda827x_cfg_0
) < 0)
1128 goto dettach_frontend
;
1130 case SAA7134_BOARD_MEDION_MD8800_QUADRO
:
1131 if (!use_frontend
) { /* terrestrial */
1132 if (configure_tda827x_fe(dev
, &md8800_dvbt_config
,
1133 &tda827x_cfg_0
) < 0)
1134 goto dettach_frontend
;
1135 } else { /* satellite */
1136 fe0
->dvb
.frontend
= dvb_attach(tda10086_attach
,
1137 &flydvbs
, &dev
->i2c_adap
);
1138 if (fe0
->dvb
.frontend
) {
1139 struct dvb_frontend
*fe
= fe0
->dvb
.frontend
;
1140 u8 dev_id
= dev
->eedata
[2];
1142 struct i2c_msg msg
= {.addr
= 0x08, .flags
= 0, .len
= 1};
1144 if (dvb_attach(tda826x_attach
, fe0
->dvb
.frontend
,
1145 0x60, &dev
->i2c_adap
, 0) == NULL
) {
1146 wprintk("%s: Medion Quadro, no tda826x "
1147 "found !\n", __func__
);
1148 goto dettach_frontend
;
1150 if (dev_id
!= 0x08) {
1151 /* we need to open the i2c gate (we know it exists) */
1152 fe
->ops
.i2c_gate_ctrl(fe
, 1);
1153 if (dvb_attach(isl6405_attach
, fe
,
1154 &dev
->i2c_adap
, 0x08, 0, 0) == NULL
) {
1155 wprintk("%s: Medion Quadro, no ISL6405 "
1156 "found !\n", __func__
);
1157 goto dettach_frontend
;
1159 if (dev_id
== 0x07) {
1160 /* fire up the 2nd section of the LNB supply since
1161 we can't do this from the other section */
1163 i2c_transfer(&dev
->i2c_adap
, &msg
, 1);
1165 fe
->ops
.i2c_gate_ctrl(fe
, 0);
1166 dev
->original_set_voltage
= fe
->ops
.set_voltage
;
1167 fe
->ops
.set_voltage
= md8800_set_voltage
;
1168 dev
->original_set_high_voltage
= fe
->ops
.enable_high_lnb_voltage
;
1169 fe
->ops
.enable_high_lnb_voltage
= md8800_set_high_voltage
;
1171 fe
->ops
.set_voltage
= md8800_set_voltage2
;
1172 fe
->ops
.enable_high_lnb_voltage
= md8800_set_high_voltage2
;
1177 case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180
:
1178 fe0
->dvb
.frontend
= dvb_attach(nxt200x_attach
, &avertvhda180
,
1180 if (fe0
->dvb
.frontend
)
1181 dvb_attach(dvb_pll_attach
, fe0
->dvb
.frontend
, 0x61,
1182 NULL
, DVB_PLL_TDHU2
);
1184 case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI
:
1185 case SAA7134_BOARD_KWORLD_ATSC110
:
1186 fe0
->dvb
.frontend
= dvb_attach(nxt200x_attach
, &kworldatsc110
,
1188 if (fe0
->dvb
.frontend
)
1189 dvb_attach(simple_tuner_attach
, fe0
->dvb
.frontend
,
1190 &dev
->i2c_adap
, 0x61,
1191 TUNER_PHILIPS_TUV1236D
);
1193 case SAA7134_BOARD_FLYDVBS_LR300
:
1194 fe0
->dvb
.frontend
= dvb_attach(tda10086_attach
, &flydvbs
,
1196 if (fe0
->dvb
.frontend
) {
1197 if (dvb_attach(tda826x_attach
, fe0
->dvb
.frontend
, 0x60,
1198 &dev
->i2c_adap
, 0) == NULL
) {
1199 wprintk("%s: No tda826x found!\n", __func__
);
1200 goto dettach_frontend
;
1202 if (dvb_attach(isl6421_attach
, fe0
->dvb
.frontend
,
1203 &dev
->i2c_adap
, 0x08, 0, 0) == NULL
) {
1204 wprintk("%s: No ISL6421 found!\n", __func__
);
1205 goto dettach_frontend
;
1209 case SAA7134_BOARD_ASUS_EUROPA2_HYBRID
:
1210 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1213 if (fe0
->dvb
.frontend
) {
1214 dev
->original_demod_sleep
= fe0
->dvb
.frontend
->ops
.sleep
;
1215 fe0
->dvb
.frontend
->ops
.sleep
= philips_europa_demod_sleep
;
1217 dvb_attach(simple_tuner_attach
, fe0
->dvb
.frontend
,
1218 &dev
->i2c_adap
, medion_cardbus
.tuner_address
,
1219 TUNER_PHILIPS_FMD1216ME_MK3
);
1222 case SAA7134_BOARD_VIDEOMATE_DVBT_200A
:
1223 fe0
->dvb
.frontend
= dvb_attach(tda10046_attach
,
1224 &philips_europa_config
,
1226 if (fe0
->dvb
.frontend
) {
1227 fe0
->dvb
.frontend
->ops
.tuner_ops
.init
= philips_td1316_tuner_init
;
1228 fe0
->dvb
.frontend
->ops
.tuner_ops
.set_params
= philips_td1316_tuner_set_params
;
1231 case SAA7134_BOARD_CINERGY_HT_PCMCIA
:
1232 if (configure_tda827x_fe(dev
, &cinergy_ht_config
,
1233 &tda827x_cfg_0
) < 0)
1234 goto dettach_frontend
;
1236 case SAA7134_BOARD_CINERGY_HT_PCI
:
1237 if (configure_tda827x_fe(dev
, &cinergy_ht_pci_config
,
1238 &tda827x_cfg_0
) < 0)
1239 goto dettach_frontend
;
1241 case SAA7134_BOARD_PHILIPS_TIGER_S
:
1242 if (configure_tda827x_fe(dev
, &philips_tiger_s_config
,
1243 &tda827x_cfg_2
) < 0)
1244 goto dettach_frontend
;
1246 case SAA7134_BOARD_ASUS_P7131_4871
:
1247 if (configure_tda827x_fe(dev
, &asus_p7131_4871_config
,
1248 &tda827x_cfg_2
) < 0)
1249 goto dettach_frontend
;
1251 case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA
:
1252 if (configure_tda827x_fe(dev
, &asus_p7131_hybrid_lna_config
,
1253 &tda827x_cfg_2
) < 0)
1254 goto dettach_frontend
;
1256 case SAA7134_BOARD_AVERMEDIA_SUPER_007
:
1257 if (configure_tda827x_fe(dev
, &avermedia_super_007_config
,
1258 &tda827x_cfg_0
) < 0)
1259 goto dettach_frontend
;
1261 case SAA7134_BOARD_TWINHAN_DTV_DVB_3056
:
1262 if (configure_tda827x_fe(dev
, &twinhan_dtv_dvb_3056_config
,
1263 &tda827x_cfg_2_sw42
) < 0)
1264 goto dettach_frontend
;
1266 case SAA7134_BOARD_PHILIPS_SNAKE
:
1267 fe0
->dvb
.frontend
= dvb_attach(tda10086_attach
, &flydvbs
,
1269 if (fe0
->dvb
.frontend
) {
1270 if (dvb_attach(tda826x_attach
, fe0
->dvb
.frontend
, 0x60,
1271 &dev
->i2c_adap
, 0) == NULL
) {
1272 wprintk("%s: No tda826x found!\n", __func__
);
1273 goto dettach_frontend
;
1275 if (dvb_attach(lnbp21_attach
, fe0
->dvb
.frontend
,
1276 &dev
->i2c_adap
, 0, 0) == NULL
) {
1277 wprintk("%s: No lnbp21 found!\n", __func__
);
1278 goto dettach_frontend
;
1282 case SAA7134_BOARD_CREATIX_CTX953
:
1283 if (configure_tda827x_fe(dev
, &md8800_dvbt_config
,
1284 &tda827x_cfg_0
) < 0)
1285 goto dettach_frontend
;
1287 case SAA7134_BOARD_MSI_TVANYWHERE_AD11
:
1288 if (configure_tda827x_fe(dev
, &philips_tiger_s_config
,
1289 &tda827x_cfg_2
) < 0)
1290 goto dettach_frontend
;
1292 case SAA7134_BOARD_AVERMEDIA_CARDBUS_506
:
1293 dprintk("AverMedia E506R dvb setup\n");
1294 saa7134_set_gpio(dev
, 25, 0);
1296 saa7134_set_gpio(dev
, 25, 1);
1297 fe0
->dvb
.frontend
= dvb_attach(mt352_attach
,
1298 &avermedia_xc3028_mt352_dev
,
1302 case SAA7134_BOARD_MD7134_BRIDGE_2
:
1303 fe0
->dvb
.frontend
= dvb_attach(tda10086_attach
,
1304 &sd1878_4m
, &dev
->i2c_adap
);
1305 if (fe0
->dvb
.frontend
) {
1306 struct dvb_frontend
*fe
;
1307 if (dvb_attach(dvb_pll_attach
, fe0
->dvb
.frontend
, 0x60,
1308 &dev
->i2c_adap
, DVB_PLL_PHILIPS_SD1878_TDA8261
) == NULL
) {
1309 wprintk("%s: MD7134 DVB-S, no SD1878 "
1310 "found !\n", __func__
);
1311 goto dettach_frontend
;
1313 /* we need to open the i2c gate (we know it exists) */
1314 fe
= fe0
->dvb
.frontend
;
1315 fe
->ops
.i2c_gate_ctrl(fe
, 1);
1316 if (dvb_attach(isl6405_attach
, fe
,
1317 &dev
->i2c_adap
, 0x08, 0, 0) == NULL
) {
1318 wprintk("%s: MD7134 DVB-S, no ISL6405 "
1319 "found !\n", __func__
);
1320 goto dettach_frontend
;
1322 fe
->ops
.i2c_gate_ctrl(fe
, 0);
1323 dev
->original_set_voltage
= fe
->ops
.set_voltage
;
1324 fe
->ops
.set_voltage
= md8800_set_voltage
;
1325 dev
->original_set_high_voltage
= fe
->ops
.enable_high_lnb_voltage
;
1326 fe
->ops
.enable_high_lnb_voltage
= md8800_set_high_voltage
;
1329 case SAA7134_BOARD_AVERMEDIA_M103
:
1330 saa7134_set_gpio(dev
, 25, 0);
1332 saa7134_set_gpio(dev
, 25, 1);
1333 fe0
->dvb
.frontend
= dvb_attach(mt352_attach
,
1334 &avermedia_xc3028_mt352_dev
,
1338 case SAA7134_BOARD_ASUSTeK_TIGER_3IN1
:
1339 if (!use_frontend
) { /* terrestrial */
1340 if (configure_tda827x_fe(dev
, &asus_tiger_3in1_config
,
1341 &tda827x_cfg_2
) < 0)
1342 goto dettach_frontend
;
1343 } else { /* satellite */
1344 fe0
->dvb
.frontend
= dvb_attach(tda10086_attach
,
1345 &flydvbs
, &dev
->i2c_adap
);
1346 if (fe0
->dvb
.frontend
) {
1347 if (dvb_attach(tda826x_attach
,
1348 fe0
->dvb
.frontend
, 0x60,
1349 &dev
->i2c_adap
, 0) == NULL
) {
1350 wprintk("%s: Asus Tiger 3in1, no "
1351 "tda826x found!\n", __func__
);
1352 goto dettach_frontend
;
1354 if (dvb_attach(lnbp21_attach
, fe0
->dvb
.frontend
,
1355 &dev
->i2c_adap
, 0, 0) == NULL
) {
1356 wprintk("%s: Asus Tiger 3in1, no lnbp21"
1357 " found!\n", __func__
);
1358 goto dettach_frontend
;
1363 case SAA7134_BOARD_ASUSTeK_TIGER
:
1364 if (configure_tda827x_fe(dev
, &philips_tiger_config
,
1365 &tda827x_cfg_0
) < 0)
1366 goto dettach_frontend
;
1368 case SAA7134_BOARD_BEHOLD_H6
:
1369 fe0
->dvb
.frontend
= dvb_attach(zl10353_attach
,
1372 if (fe0
->dvb
.frontend
) {
1373 dvb_attach(simple_tuner_attach
, fe0
->dvb
.frontend
,
1374 &dev
->i2c_adap
, 0x61,
1375 TUNER_PHILIPS_FMD1216ME_MK3
);
1379 wprintk("Huh? unknown DVB card?\n");
1383 if (attach_xc3028
) {
1384 struct dvb_frontend
*fe
;
1385 struct xc2028_config cfg
= {
1386 .i2c_adap
= &dev
->i2c_adap
,
1390 if (!fe0
->dvb
.frontend
)
1391 goto dettach_frontend
;
1393 fe
= dvb_attach(xc2028_attach
, fe0
->dvb
.frontend
, &cfg
);
1395 printk(KERN_ERR
"%s/2: xc3028 attach failed\n",
1397 goto dettach_frontend
;
1401 if (NULL
== fe0
->dvb
.frontend
) {
1402 printk(KERN_ERR
"%s/dvb: frontend initialization failed\n", dev
->name
);
1403 goto dettach_frontend
;
1405 /* define general-purpose callback pointer */
1406 fe0
->dvb
.frontend
->callback
= saa7134_tuner_callback
;
1408 /* register everything else */
1409 ret
= videobuf_dvb_register_bus(&dev
->frontends
, THIS_MODULE
, dev
,
1410 &dev
->pci
->dev
, adapter_nr
, 0);
1412 /* this sequence is necessary to make the tda1004x load its firmware
1413 * and to enter analog mode of hybrid boards
1416 if (fe0
->dvb
.frontend
->ops
.init
)
1417 fe0
->dvb
.frontend
->ops
.init(fe0
->dvb
.frontend
);
1418 if (fe0
->dvb
.frontend
->ops
.sleep
)
1419 fe0
->dvb
.frontend
->ops
.sleep(fe0
->dvb
.frontend
);
1420 if (fe0
->dvb
.frontend
->ops
.tuner_ops
.sleep
)
1421 fe0
->dvb
.frontend
->ops
.tuner_ops
.sleep(fe0
->dvb
.frontend
);
1426 videobuf_dvb_dealloc_frontends(&dev
->frontends
);
1430 static int dvb_fini(struct saa7134_dev
*dev
)
1432 struct videobuf_dvb_frontend
*fe0
;
1434 /* Get the first frontend */
1435 fe0
= videobuf_dvb_get_frontend(&dev
->frontends
, 1);
1439 /* FIXME: I suspect that this code is bogus, since the entry for
1440 Pinnacle 300I DVB-T PAL already defines the proper init to allow
1441 the detection of mt2032 (TDA9887_PORT2_INACTIVE)
1443 if (dev
->board
== SAA7134_BOARD_PINNACLE_300I_DVBT_PAL
) {
1444 struct v4l2_priv_tun_config tda9887_cfg
;
1445 static int on
= TDA9887_PRESENT
| TDA9887_PORT2_INACTIVE
;
1447 tda9887_cfg
.tuner
= TUNER_TDA9887
;
1448 tda9887_cfg
.priv
= &on
;
1450 /* otherwise we don't detect the tuner on next insmod */
1451 saa7134_i2c_call_clients(dev
, TUNER_SET_CONFIG
, &tda9887_cfg
);
1452 } else if (dev
->board
== SAA7134_BOARD_MEDION_MD8800_QUADRO
) {
1453 if ((dev
->eedata
[2] == 0x07) && use_frontend
) {
1454 /* turn off the 2nd lnb supply */
1456 struct i2c_msg msg
= {.addr
= 0x08, .buf
= &data
, .flags
= 0, .len
= 1};
1457 struct dvb_frontend
*fe
;
1458 fe
= fe0
->dvb
.frontend
;
1459 if (fe
->ops
.i2c_gate_ctrl
) {
1460 fe
->ops
.i2c_gate_ctrl(fe
, 1);
1461 i2c_transfer(&dev
->i2c_adap
, &msg
, 1);
1462 fe
->ops
.i2c_gate_ctrl(fe
, 0);
1466 videobuf_dvb_unregister_bus(&dev
->frontends
);
1470 static struct saa7134_mpeg_ops dvb_ops
= {
1471 .type
= SAA7134_MPEG_DVB
,
1476 static int __init
dvb_register(void)
1478 return saa7134_ts_register(&dvb_ops
);
1481 static void __exit
dvb_unregister(void)
1483 saa7134_ts_unregister(&dvb_ops
);
1486 module_init(dvb_register
);
1487 module_exit(dvb_unregister
);
1489 /* ------------------------------------------------------------------ */