drivers/memory/mvebu-devbus.c

   1 /*
   2  * Marvell EBU SoC Device Bus Controller
   3  * (memory controller for NOR/NAND/SRAM/FPGA devices)
   4  *
   5  * Copyright (C) 2013 Marvell
   6  *
   7  * This program is free software: you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation version 2 of the License.
  10  *
  11  * This program is distributed in the hope that it will be useful,
  12  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  13  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  14  * GNU General Public License for more details.
  15  *
  16  * You should have received a copy of the GNU General Public License
  17  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  18  *
  19  */
  20
  21 #include <linux/kernel.h>
  22 #include <linux/module.h>
  23 #include <linux/slab.h>
  24 #include <linux/err.h>
  25 #include <linux/io.h>
  26 #include <linux/clk.h>
  27 #include <linux/mbus.h>
  28 #include <linux/of_platform.h>
  29 #include <linux/of_address.h>
  30 #include <linux/platform_device.h>
  31
  32 /* Register definitions */
  33 #define DEV_WIDTH_BIT           30
  34 #define BADR_SKEW_BIT           28
  35 #define RD_HOLD_BIT             23
  36 #define ACC_NEXT_BIT            17
  37 #define RD_SETUP_BIT            12
  38 #define ACC_FIRST_BIT           6
  39
  40 #define SYNC_ENABLE_BIT         24
  41 #define WR_HIGH_BIT             16
  42 #define WR_LOW_BIT              8
  43
  44 #define READ_PARAM_OFFSET       0x0
  45 #define WRITE_PARAM_OFFSET      0x4
  46
  47 struct devbus_read_params {
  48         u32 bus_width;
  49         u32 badr_skew;
  50         u32 turn_off;
  51         u32 acc_first;
  52         u32 acc_next;
  53         u32 rd_setup;
  54         u32 rd_hold;
  55 };
  56
  57 struct devbus_write_params {
  58         u32 sync_enable;
  59         u32 wr_high;
  60         u32 wr_low;
  61         u32 ale_wr;
  62 };
  63
  64 struct devbus {
  65         struct device *dev;
  66         void __iomem *base;
  67         unsigned long tick_ps;
  68 };
  69
  70 static int get_timing_param_ps(struct devbus *devbus,
  71                                struct device_node *node,
  72                                const char *name,
  73                                u32 *ticks)
  74 {
  75         u32 time_ps;
  76         int err;
  77
  78         err = of_property_read_u32(node, name, &time_ps);
  79         if (err < 0) {
  80                 dev_err(devbus->dev, "%s has no '%s' property\n",
  81                         name, node->full_name);
  82                 return err;
  83         }
  84
  85         *ticks = (time_ps + devbus->tick_ps - 1) / devbus->tick_ps;
  86
  87         dev_dbg(devbus->dev, "%s: %u ps -> 0x%x\n",
  88                 name, time_ps, *ticks);
  89         return 0;
  90 }
  91
  92 static int devbus_set_timing_params(struct devbus *devbus,
  93                                     struct device_node *node)
  94 {
  95         struct devbus_read_params r;
  96         struct devbus_write_params w;
  97         u32 value;
  98         int err;
  99
 100         dev_dbg(devbus->dev, "Setting timing parameter, tick is %lu ps\n",
 101                 devbus->tick_ps);
 102
 103         /* Get read timings */
 104         err = of_property_read_u32(node, "devbus,bus-width", &r.bus_width);
 105         if (err < 0) {
 106                 dev_err(devbus->dev,
 107                         "%s has no 'devbus,bus-width' property\n",
 108                         node->full_name);
 109                 return err;
 110         }
 111         /* Convert bit width to byte width */
 112         r.bus_width /= 8;
 113
 114         err = get_timing_param_ps(devbus, node, "devbus,badr-skew-ps",
 115                                  &r.badr_skew);
 116         if (err < 0)
 117                 return err;
 118
 119         err = get_timing_param_ps(devbus, node, "devbus,turn-off-ps",
 120                                  &r.turn_off);
 121         if (err < 0)
 122                 return err;
 123
 124         err = get_timing_param_ps(devbus, node, "devbus,acc-first-ps",
 125                                  &r.acc_first);
 126         if (err < 0)
 127                 return err;
 128
 129         err = get_timing_param_ps(devbus, node, "devbus,acc-next-ps",
 130                                  &r.acc_next);
 131         if (err < 0)
 132                 return err;
 133
 134         err = get_timing_param_ps(devbus, node, "devbus,rd-setup-ps",
 135                                  &r.rd_setup);
 136         if (err < 0)
 137                 return err;
 138
 139         err = get_timing_param_ps(devbus, node, "devbus,rd-hold-ps",
 140                                  &r.rd_hold);
 141         if (err < 0)
 142                 return err;
 143
 144         /* Get write timings */
 145         err = of_property_read_u32(node, "devbus,sync-enable",
 146                                   &w.sync_enable);
 147         if (err < 0) {
 148                 dev_err(devbus->dev,
 149                         "%s has no 'devbus,sync-enable' property\n",
 150                         node->full_name);
 151                 return err;
 152         }
 153
 154         err = get_timing_param_ps(devbus, node, "devbus,ale-wr-ps",
 155                                  &w.ale_wr);
 156         if (err < 0)
 157                 return err;
 158
 159         err = get_timing_param_ps(devbus, node, "devbus,wr-low-ps",
 160                                  &w.wr_low);
 161         if (err < 0)
 162                 return err;
 163
 164         err = get_timing_param_ps(devbus, node, "devbus,wr-high-ps",
 165                                  &w.wr_high);
 166         if (err < 0)
 167                 return err;
 168
 169         /* Set read timings */
 170         value = r.bus_width << DEV_WIDTH_BIT |
 171                 r.badr_skew << BADR_SKEW_BIT |
 172                 r.rd_hold   << RD_HOLD_BIT   |
 173                 r.acc_next  << ACC_NEXT_BIT  |
 174                 r.rd_setup  << RD_SETUP_BIT  |
 175                 r.acc_first << ACC_FIRST_BIT |
 176                 r.turn_off;
 177
 178         dev_dbg(devbus->dev, "read parameters register 0x%p = 0x%x\n",
 179                 devbus->base + READ_PARAM_OFFSET,
 180                 value);
 181
 182         writel(value, devbus->base + READ_PARAM_OFFSET);
 183
 184         /* Set write timings */
 185         value = w.sync_enable  << SYNC_ENABLE_BIT |
 186                 w.wr_low       << WR_LOW_BIT      |
 187                 w.wr_high      << WR_HIGH_BIT     |
 188                 w.ale_wr;
 189
 190         dev_dbg(devbus->dev, "write parameters register: 0x%p = 0x%x\n",
 191                 devbus->base + WRITE_PARAM_OFFSET,
 192                 value);
 193
 194         writel(value, devbus->base + WRITE_PARAM_OFFSET);
 195
 196         return 0;
 197 }
 198
 199 static int mvebu_devbus_probe(struct platform_device *pdev)
 200 {
 201         struct device *dev = &pdev->dev;
 202         struct device_node *node = pdev->dev.of_node;
 203         struct devbus *devbus;
 204         struct resource *res;
 205         struct clk *clk;
 206         unsigned long rate;
 207         int err;
 208
 209         devbus = devm_kzalloc(&pdev->dev, sizeof(struct devbus), GFP_KERNEL);
 210         if (!devbus)
 211                 return -ENOMEM;
 212
 213         devbus->dev = dev;
 214         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 215         devbus->base = devm_ioremap_resource(&pdev->dev, res);
 216         if (IS_ERR(devbus->base))
 217                 return PTR_ERR(devbus->base);
 218
 219         clk = devm_clk_get(&pdev->dev, NULL);
 220         if (IS_ERR(clk))
 221                 return PTR_ERR(clk);
 222         clk_prepare_enable(clk);
 223
 224         /*
 225          * Obtain clock period in picoseconds,
 226          * we need this in order to convert timing
 227          * parameters from cycles to picoseconds.
 228          */
 229         rate = clk_get_rate(clk) / 1000;
 230         devbus->tick_ps = 1000000000 / rate;
 231
 232         /* Read the device tree node and set the new timing parameters */
 233         err = devbus_set_timing_params(devbus, node);
 234         if (err < 0)
 235                 return err;
 236
 237         /*
 238          * We need to create a child device explicitly from here to
 239          * guarantee that the child will be probed after the timing
 240          * parameters for the bus are written.
 241          */
 242         err = of_platform_populate(node, NULL, NULL, dev);
 243         if (err < 0)
 244                 return err;
 245
 246         return 0;
 247 }
 248
 249 static const struct of_device_id mvebu_devbus_of_match[] = {
 250         { .compatible = "marvell,mvebu-devbus" },
 251         {},
 252 };
 253 MODULE_DEVICE_TABLE(of, mvebu_devbus_of_match);
 254
 255 static struct platform_driver mvebu_devbus_driver = {
 256         .probe          = mvebu_devbus_probe,
 257         .driver         = {
 258                 .name   = "mvebu-devbus",
 259                 .owner  = THIS_MODULE,
 260                 .of_match_table = mvebu_devbus_of_match,
 261         },
 262 };
 263
 264 static int __init mvebu_devbus_init(void)
 265 {
 266         return platform_driver_register(&mvebu_devbus_driver);
 267 }
 268 module_init(mvebu_devbus_init);
 269
 270 MODULE_LICENSE("GPL v2");
 271 MODULE_AUTHOR("Ezequiel Garcia <ezequiel.garcia@free-electrons.com>");
 272 MODULE_DESCRIPTION("Marvell EBU SoC Device Bus controller");