drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 if HAS_IOMEM
   6 menu "Multifunction device drivers"
   7
   8 config MFD_CORE
   9         tristate
  10         select IRQ_DOMAIN
  11         default n
  12
  13 config MFD_CS5535
  14         tristate "AMD CS5535 and CS5536 southbridge core functions"
  15         select MFD_CORE
  16         depends on PCI && (X86_32 || (X86 && COMPILE_TEST))
  17         ---help---
  18           This is the core driver for CS5535/CS5536 MFD functions.  This is
  19           necessary for using the board's GPIO and MFGPT functionality.
  20
  21 config MFD_ACT8945A
  22         tristate "Active-semi ACT8945A"
  23         select MFD_CORE
  24         select REGMAP_I2C
  25         depends on I2C && OF
  26         help
  27           Support for the ACT8945A PMIC from Active-semi. This device
  28           features three step-down DC/DC converters and four low-dropout
  29           linear regulators, along with a complete ActivePath battery
  30           charger.
  31
  32 config MFD_AS3711
  33         bool "AMS AS3711"
  34         select MFD_CORE
  35         select REGMAP_I2C
  36         select REGMAP_IRQ
  37         depends on I2C=y
  38         help
  39           Support for the AS3711 PMIC from AMS
  40
  41 config MFD_AS3722
  42         bool "ams AS3722 Power Management IC"
  43         select MFD_CORE
  44         select REGMAP_I2C
  45         select REGMAP_IRQ
  46         depends on I2C=y && OF
  47         help
  48           The ams AS3722 is a compact system PMU suitable for mobile phones,
  49           tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
  50           controllers, 11 LDOs, RTC, automatic battery, temperature and
  51           over current monitoring, GPIOs, ADC and a watchdog.
  52
  53 config PMIC_ADP5520
  54         bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
  55         depends on I2C=y
  56         help
  57           Say yes here to add support for Analog Devices AD5520 and ADP5501,
  58           Multifunction Power Management IC. This includes
  59           the I2C driver and the core APIs _only_, you have to select
  60           individual components like LCD backlight, LEDs, GPIOs and Kepad
  61           under the corresponding menus.
  62
  63 config MFD_AAT2870_CORE
  64         bool "AnalogicTech AAT2870"
  65         select MFD_CORE
  66         depends on I2C=y
  67         depends on GPIOLIB || COMPILE_TEST
  68         help
  69           If you say yes here you get support for the AAT2870.
  70           This driver provides common support for accessing the device,
  71           additional drivers must be enabled in order to use the
  72           functionality of the device.
  73
  74 config MFD_ATMEL_FLEXCOM
  75         tristate "Atmel Flexcom (Flexible Serial Communication Unit)"
  76         select MFD_CORE
  77         depends on OF
  78         help
  79           Select this to get support for Atmel Flexcom. This is a wrapper
  80           which embeds a SPI controller, a I2C controller and a USART. Only
  81           one function can be used at a time. The choice is done at boot time
  82           by the probe function of this MFD driver according to a device tree
  83           property.
  84
  85 config MFD_ATMEL_HLCDC
  86         tristate "Atmel HLCDC (High-end LCD Controller)"
  87         select MFD_CORE
  88         select REGMAP_MMIO
  89         depends on OF
  90         help
  91           If you say yes here you get support for the HLCDC block.
  92           This driver provides common support for accessing the device,
  93           additional drivers must be enabled in order to use the
  94           functionality of the device.
  95
  96 config MFD_BCM590XX
  97         tristate "Broadcom BCM590xx PMUs"
  98         select MFD_CORE
  99         select REGMAP_I2C
 100         depends on I2C
 101         help
 102           Support for the BCM590xx PMUs from Broadcom
 103
 104 config MFD_AXP20X
 105         tristate
 106         select MFD_CORE
 107         select REGMAP_IRQ
 108
 109 config MFD_AXP20X_I2C
 110         tristate "X-Powers AXP series PMICs with I2C"
 111         select MFD_AXP20X
 112         select REGMAP_I2C
 113         depends on I2C
 114         help
 115           If you say Y here you get support for the X-Powers AXP series power
 116           management ICs (PMICs) controlled with I2C.
 117           This driver include only the core APIs. You have to select individual
 118           components like regulators or the PEK (Power Enable Key) under the
 119           corresponding menus.
 120
 121 config MFD_AXP20X_RSB
 122         tristate "X-Powers AXP series PMICs with RSB"
 123         select MFD_AXP20X
 124         depends on SUNXI_RSB
 125         help
 126           If you say Y here you get support for the X-Powers AXP series power
 127           management ICs (PMICs) controlled with RSB.
 128           This driver include only the core APIs. You have to select individual
 129           components like regulators or the PEK (Power Enable Key) under the
 130           corresponding menus.
 131
 132 config MFD_CROS_EC
 133         tristate "ChromeOS Embedded Controller"
 134         select MFD_CORE
 135         select CHROME_PLATFORMS
 136         select CROS_EC_PROTO
 137         depends on X86 || ARM || ARM64 || COMPILE_TEST
 138         help
 139           If you say Y here you get support for the ChromeOS Embedded
 140           Controller (EC) providing keyboard, battery and power services.
 141           You also need to enable the driver for the bus you are using. The
 142           protocol for talking to the EC is defined by the bus driver.
 143
 144 config MFD_CROS_EC_I2C
 145         tristate "ChromeOS Embedded Controller (I2C)"
 146         depends on MFD_CROS_EC && I2C
 147
 148         help
 149           If you say Y here, you get support for talking to the ChromeOS
 150           EC through an I2C bus. This uses a simple byte-level protocol with
 151           a checksum. Failing accesses will be retried three times to
 152           improve reliability.
 153
 154 config MFD_CROS_EC_SPI
 155         tristate "ChromeOS Embedded Controller (SPI)"
 156         depends on MFD_CROS_EC && SPI
 157
 158         ---help---
 159           If you say Y here, you get support for talking to the ChromeOS EC
 160           through a SPI bus, using a byte-level protocol. Since the EC's
 161           response time cannot be guaranteed, we support ignoring
 162           'pre-amble' bytes before the response actually starts.
 163
 164 config MFD_ASIC3
 165         bool "Compaq ASIC3"
 166         depends on GPIOLIB && ARM
 167         select MFD_CORE
 168          ---help---
 169           This driver supports the ASIC3 multifunction chip found on many
 170           PDAs (mainly iPAQ and HTC based ones)
 171
 172 config PMIC_DA903X
 173         bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 174         depends on I2C=y
 175         help
 176           Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a
 177           ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 178           usually found on PXA processors-based platforms. This includes
 179           the I2C driver and the core APIs _only_, you have to select
 180           individual components like LCD backlight, voltage regulators,
 181           LEDs and battery-charger under the corresponding menus.
 182
 183 config PMIC_DA9052
 184         bool
 185         select MFD_CORE
 186
 187 config MFD_DA9052_SPI
 188         bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI"
 189         select REGMAP_SPI
 190         select REGMAP_IRQ
 191         select PMIC_DA9052
 192         depends on SPI_MASTER=y
 193         help
 194           Support for the Dialog Semiconductor DA9052 PMIC
 195           when controlled using SPI. This driver provides common support
 196           for accessing the device, additional drivers must be enabled in
 197           order to use the functionality of the device.
 198
 199 config MFD_DA9052_I2C
 200         bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C"
 201         select REGMAP_I2C
 202         select REGMAP_IRQ
 203         select PMIC_DA9052
 204         depends on I2C=y
 205         help
 206           Support for the Dialog Semiconductor DA9052 PMIC
 207           when controlled using I2C. This driver provides common support
 208           for accessing the device, additional drivers must be enabled in
 209           order to use the functionality of the device.
 210
 211 config MFD_DA9055
 212         bool "Dialog Semiconductor DA9055 PMIC Support"
 213         select REGMAP_I2C
 214         select REGMAP_IRQ
 215         select MFD_CORE
 216         depends on I2C=y
 217         help
 218           Say yes here for support of Dialog Semiconductor DA9055. This is
 219           a Power Management IC. This driver provides common support for
 220           accessing the device as well as the I2C interface to the chip itself.
 221           Additional drivers must be enabled in order to use the functionality
 222           of the device.
 223
 224           This driver can be built as a module. If built as a module it will be
 225           called "da9055"
 226
 227 config MFD_DA9062
 228         tristate "Dialog Semiconductor DA9062 PMIC Support"
 229         select MFD_CORE
 230         select REGMAP_I2C
 231         select REGMAP_IRQ
 232         depends on I2C
 233         help
 234           Say yes here for support for the Dialog Semiconductor DA9062 PMIC.
 235           This includes the I2C driver and core APIs.
 236           Additional drivers must be enabled in order to use the functionality
 237           of the device.
 238
 239 config MFD_DA9063
 240         tristate "Dialog Semiconductor DA9063 PMIC Support"
 241         select MFD_CORE
 242         select REGMAP_I2C
 243         select REGMAP_IRQ
 244         depends on I2C
 245         help
 246           Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
 247           This includes the I2C driver and core APIs.
 248           Additional drivers must be enabled in order to use the functionality
 249           of the device.
 250
 251 config MFD_DA9150
 252         tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip"
 253         depends on I2C
 254         select MFD_CORE
 255         select REGMAP_I2C
 256         select REGMAP_IRQ
 257         help
 258           This adds support for the DA9150 integrated charger and fuel-gauge
 259           chip. This driver provides common support for accessing the device.
 260           Additional drivers must be enabled in order to use the specific
 261           features of the device.
 262
 263 config MFD_DLN2
 264         tristate "Diolan DLN2 support"
 265         select MFD_CORE
 266         depends on USB
 267         help
 268           This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter
 269           DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2,
 270           etc. must be enabled in order to use the functionality of
 271           the device.
 272
 273 config MFD_MC13XXX
 274         tristate
 275         depends on (SPI_MASTER || I2C)
 276         select MFD_CORE
 277         select REGMAP_IRQ
 278         help
 279           Enable support for the Freescale MC13783 and MC13892 PMICs.
 280           This driver provides common support for accessing the device,
 281           additional drivers must be enabled in order to use the
 282           functionality of the device.
 283
 284 config MFD_MC13XXX_SPI
 285         tristate "Freescale MC13783 and MC13892 SPI interface"
 286         depends on SPI_MASTER
 287         select REGMAP_SPI
 288         select MFD_MC13XXX
 289         help
 290           Select this if your MC13xxx is connected via an SPI bus.
 291
 292 config MFD_MC13XXX_I2C
 293         tristate "Freescale MC13892 I2C interface"
 294         depends on I2C
 295         select REGMAP_I2C
 296         select MFD_MC13XXX
 297         help
 298           Select this if your MC13xxx is connected via an I2C bus.
 299
 300 config MFD_MX25_TSADC
 301         tristate "Freescale i.MX25 integrated Touchscreen and ADC unit"
 302         select REGMAP_MMIO
 303         depends on (SOC_IMX25 && OF) || COMPILE_TEST
 304         help
 305           Enable support for the integrated Touchscreen and ADC unit of the
 306           i.MX25 processors. They consist of a conversion queue for general
 307           purpose ADC and a queue for Touchscreens.
 308
 309 config MFD_HI6421_PMIC
 310         tristate "HiSilicon Hi6421 PMU/Codec IC"
 311         depends on OF
 312         select MFD_CORE
 313         select REGMAP_MMIO
 314         help
 315           Add support for HiSilicon Hi6421 PMIC. Hi6421 includes multi-
 316           functions, such as regulators, RTC, codec, Coulomb counter, etc.
 317           This driver includes core APIs _only_. You have to select
 318           individul components like voltage regulators under corresponding
 319           menus in order to enable them.
 320           We communicate with the Hi6421 via memory-mapped I/O.
 321
 322 config MFD_HI655X_PMIC
 323         tristate "HiSilicon Hi655X series PMU/Codec IC"
 324         depends on ARCH_HISI || COMPILE_TEST
 325         depends on OF
 326         select MFD_CORE
 327         select REGMAP_MMIO
 328         select REGMAP_IRQ
 329         help
 330           Select this option to enable Hisilicon hi655x series pmic driver.
 331
 332 config HTC_EGPIO
 333         bool "HTC EGPIO support"
 334         depends on GPIOLIB && ARM
 335         help
 336             This driver supports the CPLD egpio chip present on
 337             several HTC phones.  It provides basic support for input
 338             pins, output pins, and irqs.
 339
 340 config HTC_PASIC3
 341         tristate "HTC PASIC3 LED/DS1WM chip support"
 342         select MFD_CORE
 343         help
 344           This core driver provides register access for the LED/DS1WM
 345           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
 346           HTC Magician devices, respectively. Actual functionality is
 347           handled by the leds-pasic3 and ds1wm drivers.
 348
 349 config HTC_I2CPLD
 350         bool "HTC I2C PLD chip support"
 351         depends on I2C=y && GPIOLIB
 352         help
 353           If you say yes here you get support for the supposed CPLD
 354           found on omap850 HTC devices like the HTC Wizard and HTC Herald.
 355           This device provides input and output GPIOs through an I2C
 356           interface to one or more sub-chips.
 357
 358 config MFD_INTEL_QUARK_I2C_GPIO
 359         tristate "Intel Quark MFD I2C GPIO"
 360         depends on PCI
 361         depends on X86
 362         depends on COMMON_CLK
 363         select MFD_CORE
 364         help
 365           This MFD provides support for I2C and GPIO that exist only
 366           in a single PCI device. It splits the 2 IO devices to
 367           their respective IO driver.
 368           The GPIO exports a total amount of 8 interrupt-capable GPIOs.
 369
 370 config LPC_ICH
 371         tristate "Intel ICH LPC"
 372         depends on PCI
 373         select MFD_CORE
 374         help
 375           The LPC bridge function of the Intel ICH provides support for
 376           many functional units. This driver provides needed support for
 377           other drivers to control these functions, currently GPIO and
 378           watchdog.
 379
 380 config LPC_SCH
 381         tristate "Intel SCH LPC"
 382         depends on PCI
 383         select MFD_CORE
 384         help
 385           LPC bridge function of the Intel SCH provides support for
 386           System Management Bus and General Purpose I/O.
 387
 388 config INTEL_SOC_PMIC
 389         bool "Support for Intel Atom SoC PMIC"
 390         depends on GPIOLIB
 391         depends on I2C=y
 392         select MFD_CORE
 393         select REGMAP_I2C
 394         select REGMAP_IRQ
 395         help
 396           Select this option to enable support for the PMIC device
 397           on some Intel SoC systems. The PMIC provides ADC, GPIO,
 398           thermal, charger and related power management functions
 399           on these systems.
 400
 401 config MFD_INTEL_LPSS
 402         tristate
 403         select COMMON_CLK
 404         select MFD_CORE
 405
 406 config MFD_INTEL_LPSS_ACPI
 407         tristate "Intel Low Power Subsystem support in ACPI mode"
 408         select MFD_INTEL_LPSS
 409         depends on X86 && ACPI
 410         help
 411           This driver supports Intel Low Power Subsystem (LPSS) devices such as
 412           I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake
 413           PCH) in ACPI mode.
 414
 415 config MFD_INTEL_LPSS_PCI
 416         tristate "Intel Low Power Subsystem support in PCI mode"
 417         select MFD_INTEL_LPSS
 418         depends on X86 && PCI
 419         help
 420           This driver supports Intel Low Power Subsystem (LPSS) devices such as
 421           I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake
 422           PCH) in PCI mode.
 423
 424 config MFD_INTEL_MSIC
 425         bool "Intel MSIC"
 426         depends on INTEL_SCU_IPC
 427         select MFD_CORE
 428         help
 429           Select this option to enable access to Intel MSIC (Avatele
 430           Passage) chip. This chip embeds audio, battery, GPIO, etc.
 431           devices used in Intel Medfield platforms.
 432
 433 config MFD_IPAQ_MICRO
 434         bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
 435         depends on SA1100_H3100 || SA1100_H3600
 436         select MFD_CORE
 437         help
 438           Select this to get support for the Microcontroller found in
 439           the Compaq iPAQ handheld computers. This is an Atmel
 440           AT90LS8535 microcontroller flashed with a special iPAQ
 441           firmware using the custom protocol implemented in this driver.
 442
 443 config MFD_JANZ_CMODIO
 444         tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
 445         select MFD_CORE
 446         depends on PCI
 447         help
 448           This is the core driver for the Janz CMOD-IO PCI MODULbus
 449           carrier board. This device is a PCI to MODULbus bridge which may
 450           host many different types of MODULbus daughterboards, including
 451           CAN and GPIO controllers.
 452
 453 config MFD_JZ4740_ADC
 454         bool "Janz JZ4740 ADC core"
 455         select MFD_CORE
 456         select GENERIC_IRQ_CHIP
 457         depends on MACH_JZ4740
 458         help
 459           Say yes here if you want support for the ADC unit in the JZ4740 SoC.
 460           This driver is necessary for jz4740-battery and jz4740-hwmon driver.
 461
 462 config MFD_KEMPLD
 463         tristate "Kontron module PLD device"
 464         select MFD_CORE
 465         help
 466           This is the core driver for the PLD (Programmable Logic Device) found
 467           on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD
 468           device may provide functions like watchdog, GPIO, UART and I2C bus.
 469
 470           The following modules are supported:
 471                 * COMe-bBL6
 472                 * COMe-bHL6
 473                 * COMe-bIP#
 474                 * COMe-bPC2 (ETXexpress-PC)
 475                 * COMe-bSC# (ETXexpress-SC T#)
 476                 * COMe-cBL6
 477                 * COMe-cBT6
 478                 * COMe-cBW6
 479                 * COMe-cCT6
 480                 * COMe-cDC2 (microETXexpress-DC)
 481                 * COMe-cHL6
 482                 * COMe-cPC2 (microETXexpress-PC)
 483                 * COMe-mBT10
 484                 * COMe-mCT10
 485                 * COMe-mTT10 (nanoETXexpress-TT)
 486                 * ETX-OH
 487
 488           This driver can also be built as a module. If so, the module
 489           will be called kempld-core.
 490
 491 config MFD_88PM800
 492         tristate "Marvell 88PM800"
 493         depends on I2C
 494         select REGMAP_I2C
 495         select REGMAP_IRQ
 496         select MFD_CORE
 497         help
 498           This supports for Marvell 88PM800 Power Management IC.
 499           This includes the I2C driver and the core APIs _only_, you have to
 500           select individual components like voltage regulators, RTC and
 501           battery-charger under the corresponding menus.
 502
 503 config MFD_88PM805
 504         tristate "Marvell 88PM805"
 505         depends on I2C
 506         select REGMAP_I2C
 507         select REGMAP_IRQ
 508         select MFD_CORE
 509         help
 510           This supports for Marvell 88PM805 Power Management IC. This includes
 511           the I2C driver and the core APIs _only_, you have to select individual
 512           components like codec device, headset/Mic device under the
 513           corresponding menus.
 514
 515 config MFD_88PM860X
 516         bool "Marvell 88PM8606/88PM8607"
 517         depends on I2C=y
 518         select REGMAP_I2C
 519         select MFD_CORE
 520         help
 521           This supports for Marvell 88PM8606/88PM8607 Power Management IC.
 522           This includes the I2C driver and the core APIs _only_, you have to
 523           select individual components like voltage regulators, RTC and
 524           battery-charger under the corresponding menus.
 525
 526 config MFD_MAX14577
 527         bool "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support"
 528         depends on I2C=y
 529         select MFD_CORE
 530         select REGMAP_I2C
 531         select REGMAP_IRQ
 532         select IRQ_DOMAIN
 533         help
 534           Say yes here to add support for Maxim Semiconductor MAX14577 and
 535           MAX77836 Micro-USB ICs with battery charger.
 536           This driver provides common support for accessing the device;
 537           additional drivers must be enabled in order to use the functionality
 538           of the device.
 539
 540 config MFD_MAX77620
 541         bool "Maxim Semiconductor MAX77620 and MAX20024 PMIC Support"
 542         depends on I2C=y
 543         depends on OF
 544         select MFD_CORE
 545         select REGMAP_I2C
 546         select REGMAP_IRQ
 547         select IRQ_DOMAIN
 548         help
 549           Say yes here to add support for Maxim Semiconductor MAX77620 and
 550           MAX20024 which are Power Management IC with General purpose pins,
 551           RTC, regulators, clock generator, watchdog etc. This driver
 552           provides common support for accessing the device; additional drivers
 553           must be enabled in order to use the functionality of the device.
 554
 555 config MFD_MAX77686
 556         tristate "Maxim Semiconductor MAX77686/802 PMIC Support"
 557         depends on I2C
 558         depends on OF
 559         select MFD_CORE
 560         select REGMAP_I2C
 561         select REGMAP_IRQ
 562         select IRQ_DOMAIN
 563         help
 564           Say yes here to add support for Maxim Semiconductor MAX77686 and
 565           MAX77802 which are Power Management IC with an RTC on chip.
 566           This driver provides common support for accessing the device;
 567           additional drivers must be enabled in order to use the functionality
 568           of the device.
 569
 570 config MFD_MAX77693
 571         tristate "Maxim Semiconductor MAX77693 PMIC Support"
 572         depends on I2C
 573         select MFD_CORE
 574         select REGMAP_I2C
 575         select REGMAP_IRQ
 576         help
 577           Say yes here to add support for Maxim Semiconductor MAX77693.
 578           This is a companion Power Management IC with Flash, Haptic, Charger,
 579           and MUIC(Micro USB Interface Controller) controls on chip.
 580           This driver provides common support for accessing the device;
 581           additional drivers must be enabled in order to use the functionality
 582           of the device.
 583
 584 config MFD_MAX77843
 585         bool "Maxim Semiconductor MAX77843 PMIC Support"
 586         depends on I2C=y
 587         select MFD_CORE
 588         select REGMAP_I2C
 589         select REGMAP_IRQ
 590         help
 591           Say yes here to add support for Maxim Semiconductor MAX77843.
 592           This is companion Power Management IC with LEDs, Haptic, Charger,
 593           Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
 594           This driver provides common support for accessing the device;
 595           additional drivers must be enabled in order to use the functionality
 596           of the device.
 597
 598 config MFD_MAX8907
 599         tristate "Maxim Semiconductor MAX8907 PMIC Support"
 600         select MFD_CORE
 601         depends on I2C
 602         select REGMAP_I2C
 603         select REGMAP_IRQ
 604         help
 605           Say yes here to add support for Maxim Semiconductor MAX8907. This is
 606           a Power Management IC. This driver provides common support for
 607           accessing the device; additional drivers must be enabled in order
 608           to use the functionality of the device.
 609
 610 config MFD_MAX8925
 611         bool "Maxim Semiconductor MAX8925 PMIC Support"
 612         depends on I2C=y
 613         select MFD_CORE
 614         help
 615           Say yes here to add support for Maxim Semiconductor MAX8925. This is
 616           a Power Management IC. This driver provides common support for
 617           accessing the device, additional drivers must be enabled in order
 618           to use the functionality of the device.
 619
 620 config MFD_MAX8997
 621         bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
 622         depends on I2C=y
 623         select MFD_CORE
 624         select IRQ_DOMAIN
 625         help
 626           Say yes here to add support for Maxim Semiconductor MAX8997/8966.
 627           This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
 628           MUIC controls on chip.
 629           This driver provides common support for accessing the device;
 630           additional drivers must be enabled in order to use the functionality
 631           of the device.
 632
 633 config MFD_MAX8998
 634         bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
 635         depends on I2C=y
 636         select MFD_CORE
 637         select IRQ_DOMAIN
 638         help
 639           Say yes here to add support for Maxim Semiconductor MAX8998 and
 640           National Semiconductor LP3974. This is a Power Management IC.
 641           This driver provides common support for accessing the device,
 642           additional drivers must be enabled in order to use the functionality
 643           of the device.
 644
 645 config MFD_MT6397
 646         tristate "MediaTek MT6397 PMIC Support"
 647         select MFD_CORE
 648         select IRQ_DOMAIN
 649         help
 650           Say yes here to add support for MediaTek MT6397 PMIC. This is
 651           a Power Management IC. This driver provides common support for
 652           accessing the device; additional drivers must be enabled in order
 653           to use the functionality of the device.
 654
 655 config MFD_MENF21BMC
 656         tristate "MEN 14F021P00 Board Management Controller Support"
 657         depends on I2C
 658         select MFD_CORE
 659         help
 660           Say yes here to add support for the MEN 14F021P00 BMC
 661           which is a Board Management Controller connected to the I2C bus.
 662           The device supports multiple sub-devices like LED, HWMON and WDT.
 663           This driver provides common support for accessing the devices;
 664           additional drivers must be enabled in order to use the
 665           functionality of the BMC device.
 666
 667           This driver can also be built as a module. If so the module
 668           will be called menf21bmc.
 669
 670 config EZX_PCAP
 671         bool "Motorola EZXPCAP Support"
 672         depends on SPI_MASTER
 673         help
 674           This enables the PCAP ASIC present on EZX Phones. This is
 675           needed for MMC, TouchScreen, Sound, USB, etc..
 676
 677 config MFD_VIPERBOARD
 678         tristate "Nano River Technologies Viperboard"
 679         select MFD_CORE
 680         depends on USB
 681         default n
 682         help
 683           Say yes here if you want support for Nano River Technologies
 684           Viperboard.
 685           There are mfd cell drivers available for i2c master, adc and
 686           both gpios found on the board. The spi part does not yet
 687           have a driver.
 688           You need to select the mfd cell drivers separately.
 689           The drivers do not support all features the board exposes.
 690
 691 config MFD_RETU
 692         tristate "Nokia Retu and Tahvo multi-function device"
 693         select MFD_CORE
 694         depends on I2C
 695         select REGMAP_IRQ
 696         help
 697           Retu and Tahvo are a multi-function devices found on Nokia
 698           Internet Tablets (770, N800 and N810).
 699
 700 config MFD_PCF50633
 701         tristate "NXP PCF50633"
 702         depends on I2C
 703         select REGMAP_I2C
 704         help
 705           Say yes here if you have NXP PCF50633 chip on your board.
 706           This core driver provides register access and IRQ handling
 707           facilities, and registers devices for the various functions
 708           so that function-specific drivers can bind to them.
 709
 710 config PCF50633_ADC
 711         tristate "NXP PCF50633 ADC"
 712         depends on MFD_PCF50633
 713         help
 714          Say yes here if you want to include support for ADC in the
 715          NXP PCF50633 chip.
 716
 717 config PCF50633_GPIO
 718         tristate "NXP PCF50633 GPIO"
 719         depends on MFD_PCF50633
 720         help
 721          Say yes here if you want to include support GPIO for pins on
 722          the PCF50633 chip.
 723
 724 config UCB1400_CORE
 725         tristate "Philips UCB1400 Core driver"
 726         depends on AC97_BUS
 727         depends on GPIOLIB
 728         help
 729           This enables support for the Philips UCB1400 core functions.
 730           The UCB1400 is an AC97 audio codec.
 731
 732           To compile this driver as a module, choose M here: the
 733           module will be called ucb1400_core.
 734
 735 config MFD_PM8XXX
 736         tristate
 737
 738 config MFD_PM8921_CORE
 739         tristate "Qualcomm PM8921 PMIC chip"
 740         depends on (ARM || HEXAGON)
 741         select IRQ_DOMAIN
 742         select MFD_CORE
 743         select MFD_PM8XXX
 744         select REGMAP
 745         help
 746           If you say yes to this option, support will be included for the
 747           built-in PM8921 PMIC chip.
 748
 749           This is required if your board has a PM8921 and uses its features,
 750           such as: MPPs, GPIOs, regulators, interrupts, and PWM.
 751
 752           Say M here if you want to include support for PM8921 chip as a module.
 753           This will build a module called "pm8921-core".
 754
 755 config MFD_QCOM_RPM
 756         tristate "Qualcomm Resource Power Manager (RPM)"
 757         depends on ARCH_QCOM && OF
 758         help
 759           If you say yes to this option, support will be included for the
 760           Resource Power Manager system found in the Qualcomm 8660, 8960 and
 761           8064 based devices.
 762
 763           This is required to access many regulators, clocks and bus
 764           frequencies controlled by the RPM on these devices.
 765
 766           Say M here if you want to include support for the Qualcomm RPM as a
 767           module. This will build a module called "qcom_rpm".
 768
 769 config MFD_SPMI_PMIC
 770         tristate "Qualcomm SPMI PMICs"
 771         depends on ARCH_QCOM || COMPILE_TEST
 772         depends on OF
 773         depends on SPMI
 774         select REGMAP_SPMI
 775         help
 776           This enables support for the Qualcomm SPMI PMICs.
 777           These PMICs are currently used with the Snapdragon 800 series of
 778           SoCs.  Note, that this will only be useful paired with descriptions
 779           of the independent functions as children nodes in the device tree.
 780
 781           Say M here if you want to include support for the SPMI PMIC
 782           series as a module.  The module will be called "qcom-spmi-pmic".
 783
 784 config MFD_RDC321X
 785         tristate "RDC R-321x southbridge"
 786         select MFD_CORE
 787         depends on PCI
 788         help
 789           Say yes here if you want to have support for the RDC R-321x SoC
 790           southbridge which provides access to GPIOs and Watchdog using the
 791           southbridge PCI device configuration space.
 792
 793 config MFD_RTSX_PCI
 794         tristate "Realtek PCI-E card reader"
 795         depends on PCI
 796         select MFD_CORE
 797         help
 798           This supports for Realtek PCI-Express card reader including rts5209,
 799           rts5227, rts522A, rts5229, rts5249, rts524A, rts525A, rtl8411, etc.
 800           Realtek card reader supports access to many types of memory cards,
 801           such as Memory Stick, Memory Stick Pro, Secure Digital and
 802           MultiMediaCard.
 803
 804 config MFD_RT5033
 805         tristate "Richtek RT5033 Power Management IC"
 806         depends on I2C
 807         select MFD_CORE
 808         select REGMAP_I2C
 809         select REGMAP_IRQ
 810         help
 811           This driver provides for the Richtek RT5033 Power Management IC,
 812           which includes the I2C driver and the Core APIs. This driver provides
 813           common support for accessing the device. The device supports multiple
 814           sub-devices like charger, fuel gauge, flash LED, current source,
 815           LDO and Buck.
 816
 817 config MFD_RTSX_USB
 818         tristate "Realtek USB card reader"
 819         depends on USB
 820         select MFD_CORE
 821         help
 822           Select this option to get support for Realtek USB 2.0 card readers
 823           including RTS5129, RTS5139, RTS5179 and RTS5170.
 824           Realtek card reader supports access to many types of memory cards,
 825           such as Memory Stick Pro, Secure Digital and MultiMediaCard.
 826
 827 config MFD_RC5T583
 828         bool "Ricoh RC5T583 Power Management system device"
 829         depends on I2C=y
 830         select MFD_CORE
 831         select REGMAP_I2C
 832         help
 833           Select this option to get support for the RICOH583 Power
 834           Management system device.
 835           This driver provides common support for accessing the device
 836           through i2c interface. The device supports multiple sub-devices
 837           like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
 838           Additional drivers must be enabled in order to use the
 839           different functionality of the device.
 840
 841 config MFD_RK808
 842         tristate "Rockchip RK808 Power Management chip"
 843         depends on I2C && OF
 844         select MFD_CORE
 845         select REGMAP_I2C
 846         select REGMAP_IRQ
 847         help
 848           If you say yes here you get support for the RK808
 849           Power Management chips.
 850           This driver provides common support for accessing the device
 851           through I2C interface. The device supports multiple sub-devices
 852           including interrupts, RTC, LDO & DCDC regulators, and onkey.
 853
 854 config MFD_RN5T618
 855         tristate "Ricoh RN5T5618 PMIC"
 856         depends on I2C
 857         select MFD_CORE
 858         select REGMAP_I2C
 859         help
 860           Say yes here to add support for the Ricoh RN5T618 PMIC. This
 861           driver provides common support for accessing the device,
 862           additional drivers must be enabled in order to use the
 863           functionality of the device.
 864
 865 config MFD_SEC_CORE
 866         bool "SAMSUNG Electronics PMIC Series Support"
 867         depends on I2C=y
 868         select MFD_CORE
 869         select REGMAP_I2C
 870         select REGMAP_IRQ
 871         help
 872          Support for the Samsung Electronics MFD series.
 873          This driver provides common support for accessing the device,
 874          additional drivers must be enabled in order to use the functionality
 875          of the device
 876
 877 config MFD_SI476X_CORE
 878         tristate "Silicon Laboratories 4761/64/68 AM/FM radio."
 879         depends on I2C
 880         select MFD_CORE
 881         select REGMAP_I2C
 882         help
 883           This is the core driver for the SI476x series of AM/FM
 884           radio. This MFD driver connects the radio-si476x V4L2 module
 885           and the si476x audio codec.
 886
 887           To compile this driver as a module, choose M here: the
 888           module will be called si476x-core.
 889
 890 config MFD_SM501
 891         tristate "Silicon Motion SM501"
 892          ---help---
 893           This is the core driver for the Silicon Motion SM501 multimedia
 894           companion chip. This device is a multifunction device which may
 895           provide numerous interfaces including USB host controller, USB gadget,
 896           asynchronous serial ports, audio functions, and a dual display video
 897           interface. The device may be connected by PCI or local bus with
 898           varying functions enabled.
 899
 900 config MFD_SM501_GPIO
 901         bool "Export GPIO via GPIO layer"
 902         depends on MFD_SM501 && GPIOLIB
 903          ---help---
 904          This option uses the gpio library layer to export the 64 GPIO
 905          lines on the SM501. The platform data is used to supply the
 906          base number for the first GPIO line to register.
 907
 908 config MFD_SKY81452
 909         tristate "Skyworks Solutions SKY81452"
 910         select MFD_CORE
 911         select REGMAP_I2C
 912         depends on I2C
 913         help
 914           This is the core driver for the Skyworks SKY81452 backlight and
 915           voltage regulator device.
 916
 917           This driver can also be built as a module.  If so, the module
 918           will be called sky81452.
 919
 920 config MFD_SMSC
 921        bool "SMSC ECE1099 series chips"
 922        depends on I2C=y
 923        select MFD_CORE
 924        select REGMAP_I2C
 925        help
 926         If you say yes here you get support for the
 927         ece1099 chips from SMSC.
 928
 929         To compile this driver as a module, choose M here: the
 930         module will be called smsc.
 931
 932 config ABX500_CORE
 933         bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
 934         default y if ARCH_U300 || ARCH_U8500
 935         help
 936           Say yes here if you have the ABX500 Mixed Signal IC family
 937           chips. This core driver expose register access functions.
 938           Functionality specific drivers using these functions can
 939           remain unchanged when IC changes. Binding of the functions to
 940           actual register access is done by the IC core driver.
 941
 942 config AB3100_CORE
 943         bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
 944         depends on I2C=y && ABX500_CORE
 945         select MFD_CORE
 946         default y if ARCH_U300
 947         help
 948           Select this to enable the AB3100 Mixed Signal IC core
 949           functionality. This connects to a AB3100 on the I2C bus
 950           and expose a number of symbols needed for dependent devices
 951           to read and write registers and subscribe to events from
 952           this multi-functional IC. This is needed to use other features
 953           of the AB3100 such as battery-backed RTC, charging control,
 954           LEDs, vibrator, system power and temperature, power management
 955           and ALSA sound.
 956
 957 config AB3100_OTP
 958         tristate "ST-Ericsson AB3100 OTP functions"
 959         depends on AB3100_CORE
 960         default y if AB3100_CORE
 961         help
 962           Select this to enable the AB3100 Mixed Signal IC OTP (one-time
 963           programmable memory) support. This exposes a sysfs file to read
 964           out OTP values.
 965
 966 config AB8500_CORE
 967         bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
 968         depends on ABX500_CORE && MFD_DB8500_PRCMU
 969         select POWER_SUPPLY
 970         select MFD_CORE
 971         select IRQ_DOMAIN
 972         help
 973           Select this option to enable access to AB8500 power management
 974           chip. This connects to U8500 either on the SSP/SPI bus (deprecated
 975           since hardware version v1.0) or the I2C bus via PRCMU. It also adds
 976           the irq_chip parts for handling the Mixed Signal chip events.
 977           This chip embeds various other multimedia funtionalities as well.
 978
 979 config AB8500_DEBUG
 980        bool "Enable debug info via debugfs"
 981        depends on AB8500_GPADC && DEBUG_FS
 982        default y if DEBUG_FS
 983        help
 984          Select this option if you want debug information using the debug
 985          filesystem, debugfs.
 986
 987 config AB8500_GPADC
 988         bool "ST-Ericsson AB8500 GPADC driver"
 989         depends on AB8500_CORE && REGULATOR_AB8500
 990         default y
 991         help
 992           AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
 993
 994 config MFD_DB8500_PRCMU
 995         bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
 996         depends on UX500_SOC_DB8500
 997         select MFD_CORE
 998         help
 999           Select this option to enable support for the DB8500 Power Reset
1000           and Control Management Unit. This is basically an autonomous
1001           system controller running an XP70 microprocessor, which is accessed
1002           through a register map.
1003
1004 config MFD_STMPE
1005         bool "STMicroelectronics STMPE"
1006         depends on (I2C=y || SPI_MASTER=y)
1007         depends on OF
1008         select MFD_CORE
1009         help
1010           Support for the STMPE family of I/O Expanders from
1011           STMicroelectronics.
1012
1013           Currently supported devices are:
1014
1015                 STMPE811: GPIO, Touchscreen
1016                 STMPE1601: GPIO, Keypad
1017                 STMPE1801: GPIO, Keypad
1018                 STMPE2401: GPIO, Keypad
1019                 STMPE2403: GPIO, Keypad
1020
1021           This driver provides common support for accessing the device,
1022           additional drivers must be enabled in order to use the functionality
1023           of the device.  Currently available sub drivers are:
1024
1025                 GPIO: stmpe-gpio
1026                 Keypad: stmpe-keypad
1027                 Touchscreen: stmpe-ts
1028
1029 menu "STMicroelectronics STMPE Interface Drivers"
1030 depends on MFD_STMPE
1031
1032 config STMPE_I2C
1033         bool "STMicroelectronics STMPE I2C Interface"
1034         depends on I2C=y
1035         default y
1036         help
1037           This is used to enable I2C interface of STMPE
1038
1039 config STMPE_SPI
1040         bool "STMicroelectronics STMPE SPI Interface"
1041         depends on SPI_MASTER
1042         help
1043           This is used to enable SPI interface of STMPE
1044 endmenu
1045
1046 config MFD_STA2X11
1047         bool "STMicroelectronics STA2X11"
1048         depends on STA2X11
1049         select MFD_CORE
1050         select REGMAP_MMIO
1051
1052 config MFD_SUN6I_PRCM
1053         bool "Allwinner A31 PRCM controller"
1054         depends on ARCH_SUNXI
1055         select MFD_CORE
1056         help
1057           Support for the PRCM (Power/Reset/Clock Management) unit available
1058           in A31 SoC.
1059
1060 config MFD_SYSCON
1061         bool "System Controller Register R/W Based on Regmap"
1062         select REGMAP_MMIO
1063         help
1064           Select this option to enable accessing system control registers
1065           via regmap.
1066
1067 config MFD_DAVINCI_VOICECODEC
1068         tristate
1069         select MFD_CORE
1070         select REGMAP_MMIO
1071
1072 config MFD_TI_AM335X_TSCADC
1073         tristate "TI ADC / Touch Screen chip support"
1074         select MFD_CORE
1075         select REGMAP
1076         select REGMAP_MMIO
1077         help
1078           If you say yes here you get support for Texas Instruments series
1079           of Touch Screen /ADC chips.
1080           To compile this driver as a module, choose M here: the
1081           module will be called ti_am335x_tscadc.
1082
1083 config MFD_DM355EVM_MSP
1084         bool "TI DaVinci DM355 EVM microcontroller"
1085         depends on I2C=y && MACH_DAVINCI_DM355_EVM
1086         help
1087           This driver supports the MSP430 microcontroller used on these
1088           boards.  MSP430 firmware manages resets and power sequencing,
1089           inputs from buttons and the IR remote, LEDs, an RTC, and more.
1090
1091 config MFD_LP3943
1092         tristate "TI/National Semiconductor LP3943 MFD Driver"
1093         depends on I2C
1094         select MFD_CORE
1095         select REGMAP_I2C
1096         help
1097           Support for the TI/National Semiconductor LP3943.
1098           This driver consists of GPIO and PWM drivers.
1099           With these functionalities, it can be used for LED string control or
1100           general usage such like a GPIO controller and a PWM controller.
1101
1102 config MFD_LP8788
1103         bool "TI LP8788 Power Management Unit Driver"
1104         depends on I2C=y
1105         select MFD_CORE
1106         select REGMAP_I2C
1107         select IRQ_DOMAIN
1108         help
1109           TI LP8788 PMU supports regulators, battery charger, RTC,
1110           ADC, backlight driver and current sinks.
1111
1112 config MFD_OMAP_USB_HOST
1113         bool "TI OMAP USBHS core and TLL driver"
1114         depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
1115         default y
1116         help
1117           This is the core driver for the OAMP EHCI and OHCI drivers.
1118           This MFD driver does the required setup functionalities for
1119           OMAP USB Host drivers.
1120
1121 config MFD_PALMAS
1122         bool "TI Palmas series chips"
1123         select MFD_CORE
1124         select REGMAP_I2C
1125         select REGMAP_IRQ
1126         depends on I2C=y
1127         help
1128           If you say yes here you get support for the Palmas
1129           series of PMIC chips from Texas Instruments.
1130
1131 config TPS6105X
1132         tristate "TI TPS61050/61052 Boost Converters"
1133         depends on I2C
1134         select REGMAP_I2C
1135         select REGULATOR
1136         select MFD_CORE
1137         select REGULATOR_FIXED_VOLTAGE
1138         help
1139           This option enables a driver for the TP61050/TPS61052
1140           high-power "white LED driver". This boost converter is
1141           sometimes used for other things than white LEDs, and
1142           also contains a GPIO pin.
1143
1144 config TPS65010
1145         tristate "TI TPS6501x Power Management chips"
1146         depends on I2C && GPIOLIB
1147         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
1148         help
1149           If you say yes here you get support for the TPS6501x series of
1150           Power Management chips.  These include voltage regulators,
1151           lithium ion/polymer battery charging, and other features that
1152           are often used in portable devices like cell phones and cameras.
1153
1154           This driver can also be built as a module.  If so, the module
1155           will be called tps65010.
1156
1157 config TPS6507X
1158         tristate "TI TPS6507x Power Management / Touch Screen chips"
1159         select MFD_CORE
1160         depends on I2C
1161         help
1162           If you say yes here you get support for the TPS6507x series of
1163           Power Management / Touch Screen chips.  These include voltage
1164           regulators, lithium ion/polymer battery charging, touch screen
1165           and other features that are often used in portable devices.
1166           This driver can also be built as a module.  If so, the module
1167           will be called tps6507x.
1168
1169 config MFD_TPS65086
1170         tristate "TI TPS65086 Power Management Integrated Chips (PMICs)"
1171         select REGMAP
1172         select REGMAP_IRQ
1173         select REGMAP_I2C
1174         depends on I2C
1175         help
1176           If you say yes here you get support for the TPS65086 series of
1177           Power Management chips.
1178           This driver provides common support for accessing the device,
1179           additional drivers must be enabled in order to use the
1180           functionality of the device.
1181
1182 config TPS65911_COMPARATOR
1183         tristate
1184
1185 config MFD_TPS65090
1186         bool "TI TPS65090 Power Management chips"
1187         depends on I2C=y
1188         select MFD_CORE
1189         select REGMAP_I2C
1190         select REGMAP_IRQ
1191         help
1192           If you say yes here you get support for the TPS65090 series of
1193           Power Management chips.
1194           This driver provides common support for accessing the device,
1195           additional drivers must be enabled in order to use the
1196           functionality of the device.
1197
1198 config MFD_TPS65217
1199         tristate "TI TPS65217 Power Management / White LED chips"
1200         depends on I2C
1201         select MFD_CORE
1202         select REGMAP_I2C
1203         help
1204           If you say yes here you get support for the TPS65217 series of
1205           Power Management / White LED chips.
1206           These include voltage regulators, lithium ion/polymer battery
1207           charger, wled and other features that are often used in portable
1208           devices.
1209
1210           This driver can also be built as a module.  If so, the module
1211           will be called tps65217.
1212
1213 config MFD_TPS65218
1214         tristate "TI TPS65218 Power Management chips"
1215         depends on I2C
1216         select MFD_CORE
1217         select REGMAP_I2C
1218         select REGMAP_IRQ
1219         help
1220           If you say yes here you get support for the TPS65218 series of
1221           Power Management chips.
1222           These include voltage regulators, gpio and other features
1223           that are often used in portable devices. Only regulator
1224           component is currently supported.
1225
1226           This driver can also be built as a module.  If so, the module
1227           will be called tps65218.
1228
1229 config MFD_TPS6586X
1230         bool "TI TPS6586x Power Management chips"
1231         depends on I2C=y
1232         select MFD_CORE
1233         select REGMAP_I2C
1234         help
1235           If you say yes here you get support for the TPS6586X series of
1236           Power Management chips.
1237           This driver provides common support for accessing the device,
1238           additional drivers must be enabled in order to use the
1239           functionality of the device.
1240
1241           This driver can also be built as a module.  If so, the module
1242           will be called tps6586x.
1243
1244 config MFD_TPS65910
1245         bool "TI TPS65910 Power Management chip"
1246         depends on I2C=y
1247         depends on GPIOLIB || COMPILE_TEST
1248         select MFD_CORE
1249         select REGMAP_I2C
1250         select REGMAP_IRQ
1251         select IRQ_DOMAIN
1252         help
1253           if you say yes here you get support for the TPS65910 series of
1254           Power Management chips.
1255
1256 config MFD_TPS65912
1257         tristate
1258         select MFD_CORE
1259         select REGMAP
1260         select REGMAP_IRQ
1261
1262 config MFD_TPS65912_I2C
1263         tristate "TI TPS65912 Power Management chip with I2C"
1264         select MFD_TPS65912
1265         select REGMAP_I2C
1266         depends on I2C
1267         help
1268           If you say yes here you get support for the TPS65912 series of
1269           PM chips with I2C interface.
1270
1271 config MFD_TPS65912_SPI
1272         tristate "TI TPS65912 Power Management chip with SPI"
1273         select MFD_TPS65912
1274         select REGMAP_SPI
1275         depends on SPI_MASTER
1276         help
1277           If you say yes here you get support for the TPS65912 series of
1278           PM chips with SPI interface.
1279
1280 config MFD_TPS80031
1281         bool "TI TPS80031/TPS80032 Power Management chips"
1282         depends on I2C=y
1283         select MFD_CORE
1284         select REGMAP_I2C
1285         select REGMAP_IRQ
1286         help
1287           If you say yes here you get support for the Texas Instruments
1288           TPS80031/ TPS80032 Fully Integrated Power Management with Power
1289           Path and Battery Charger. The device provides five configurable
1290           step-down converters, 11 general purpose LDOs, USB OTG Module,
1291           ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
1292           Power Path from USB, 32K clock generator.
1293
1294 config TWL4030_CORE
1295         bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
1296         depends on I2C=y
1297         select IRQ_DOMAIN
1298         select REGMAP_I2C
1299         help
1300           Say yes here if you have TWL4030 / TWL6030 family chip on your board.
1301           This core driver provides register access and IRQ handling
1302           facilities, and registers devices for the various functions
1303           so that function-specific drivers can bind to them.
1304
1305           These multi-function chips are found on many OMAP2 and OMAP3
1306           boards, providing power management, RTC, GPIO, keypad, a
1307           high speed USB OTG transceiver, an audio codec (on most
1308           versions) and many other features.
1309
1310 config TWL4030_POWER
1311         bool "TI TWL4030 power resources"
1312         depends on TWL4030_CORE && ARM
1313         help
1314           Say yes here if you want to use the power resources on the
1315           TWL4030 family chips.  Most of these resources are regulators,
1316           which have a separate driver; some are control signals, such
1317           as clock request handshaking.
1318
1319           This driver uses board-specific data to initialize the resources
1320           and load scripts controlling which resources are switched off/on
1321           or reset when a sleep, wakeup or warm reset event occurs.
1322
1323 config MFD_TWL4030_AUDIO
1324         bool "TI TWL4030 Audio"
1325         depends on TWL4030_CORE
1326         select MFD_CORE
1327         default n
1328
1329 config TWL6040_CORE
1330         bool "TI TWL6040 audio codec"
1331         depends on I2C=y
1332         select MFD_CORE
1333         select REGMAP_I2C
1334         select REGMAP_IRQ
1335         default n
1336         help
1337           Say yes here if you want support for Texas Instruments TWL6040 audio
1338           codec.
1339           This driver provides common support for accessing the device,
1340           additional drivers must be enabled in order to use the
1341           functionality of the device (audio, vibra).
1342
1343 config MENELAUS
1344         bool "TI TWL92330/Menelaus PM chip"
1345         depends on I2C=y && ARCH_OMAP2
1346         help
1347           If you say yes here you get support for the Texas Instruments
1348           TWL92330/Menelaus Power Management chip. This include voltage
1349           regulators, Dual slot memory card transceivers, real-time clock
1350           and other features that are often used in portable devices like
1351           cell phones and PDAs.
1352
1353 config MFD_WL1273_CORE
1354         tristate "TI WL1273 FM radio"
1355         depends on I2C
1356         select MFD_CORE
1357         default n
1358         help
1359           This is the core driver for the TI WL1273 FM radio. This MFD
1360           driver connects the radio-wl1273 V4L2 module and the wl1273
1361           audio codec.
1362
1363 config MFD_LM3533
1364         tristate "TI/National Semiconductor LM3533 Lighting Power chip"
1365         depends on I2C
1366         select MFD_CORE
1367         select REGMAP_I2C
1368         help
1369           Say yes here to enable support for National Semiconductor / TI
1370           LM3533 Lighting Power chips.
1371
1372           This driver provides common support for accessing the device;
1373           additional drivers must be enabled in order to use the LED,
1374           backlight or ambient-light-sensor functionality of the device.
1375
1376 config MFD_TIMBERDALE
1377         tristate "Timberdale FPGA"
1378         select MFD_CORE
1379         depends on PCI && GPIOLIB && (X86_32 || COMPILE_TEST)
1380         ---help---
1381         This is the core driver for the timberdale FPGA. This device is a
1382         multifunction device which exposes numerous platform devices.
1383
1384         The timberdale FPGA can be found on the Intel Atom development board
1385         for in-vehicle infontainment, called Russellville.
1386
1387 config MFD_TC3589X
1388         bool "Toshiba TC35892 and variants"
1389         depends on I2C=y
1390         depends on OF
1391         select MFD_CORE
1392         help
1393           Support for the Toshiba TC35892 and variants I/O Expander.
1394
1395           This driver provides common support for accessing the device,
1396           additional drivers must be enabled in order to use the
1397           functionality of the device.
1398
1399 config MFD_TMIO
1400         bool
1401         default n
1402
1403 config MFD_T7L66XB
1404         bool "Toshiba T7L66XB"
1405         depends on ARM && HAVE_CLK
1406         select MFD_CORE
1407         select MFD_TMIO
1408         help
1409           Support for Toshiba Mobile IO Controller T7L66XB
1410
1411 config MFD_TC6387XB
1412         bool "Toshiba TC6387XB"
1413         depends on ARM && HAVE_CLK
1414         select MFD_CORE
1415         select MFD_TMIO
1416         help
1417           Support for Toshiba Mobile IO Controller TC6387XB
1418
1419 config MFD_TC6393XB
1420         bool "Toshiba TC6393XB"
1421         depends on ARM && HAVE_CLK
1422         select GPIOLIB
1423         select MFD_CORE
1424         select MFD_TMIO
1425         help
1426           Support for Toshiba Mobile IO Controller TC6393XB
1427
1428 config MFD_VX855
1429         tristate "VIA VX855/VX875 integrated south bridge"
1430         depends on PCI
1431         select MFD_CORE
1432         help
1433           Say yes here to enable support for various functions of the
1434           VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
1435           and/or vx855_gpio drivers for this to do anything useful.
1436
1437 config MFD_ARIZONA
1438         select REGMAP
1439         select REGMAP_IRQ
1440         select MFD_CORE
1441         bool
1442
1443 config MFD_ARIZONA_I2C
1444         tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with I2C"
1445         select MFD_ARIZONA
1446         select REGMAP_I2C
1447         depends on I2C
1448         help
1449           Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform
1450           audio SoC core functionality controlled via I2C.
1451
1452 config MFD_ARIZONA_SPI
1453         tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with SPI"
1454         select MFD_ARIZONA
1455         select REGMAP_SPI
1456         depends on SPI_MASTER
1457         help
1458           Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform
1459           audio SoC core functionality controlled via SPI.
1460
1461 config MFD_CS47L24
1462         bool "Cirrus Logic CS47L24 and WM1831"
1463         depends on MFD_ARIZONA
1464         help
1465           Support for Cirrus Logic CS47L24 and WM1831 low power audio SoC
1466
1467 config MFD_WM5102
1468         bool "Wolfson Microelectronics WM5102"
1469         depends on MFD_ARIZONA
1470         help
1471           Support for Wolfson Microelectronics WM5102 low power audio SoC
1472
1473 config MFD_WM5110
1474         bool "Wolfson Microelectronics WM5110 and WM8280/WM8281"
1475         depends on MFD_ARIZONA
1476         help
1477           Support for Wolfson Microelectronics WM5110 and WM8280/WM8281
1478           low power audio SoC
1479
1480 config MFD_WM8997
1481         bool "Wolfson Microelectronics WM8997"
1482         depends on MFD_ARIZONA
1483         help
1484           Support for Wolfson Microelectronics WM8997 low power audio SoC
1485
1486 config MFD_WM8998
1487         bool "Wolfson Microelectronics WM8998"
1488         depends on MFD_ARIZONA
1489         help
1490           Support for Wolfson Microelectronics WM8998 low power audio SoC
1491
1492 config MFD_WM8400
1493         bool "Wolfson Microelectronics WM8400"
1494         select MFD_CORE
1495         depends on I2C=y
1496         select REGMAP_I2C
1497         help
1498           Support for the Wolfson Microelecronics WM8400 PMIC and audio
1499           CODEC.  This driver provides common support for accessing
1500           the device, additional drivers must be enabled in order to use
1501           the functionality of the device.
1502
1503 config MFD_WM831X
1504         bool
1505
1506 config MFD_WM831X_I2C
1507         bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
1508         select MFD_CORE
1509         select MFD_WM831X
1510         select REGMAP_I2C
1511         select IRQ_DOMAIN
1512         depends on I2C=y
1513         help
1514           Support for the Wolfson Microelecronics WM831x and WM832x PMICs
1515           when controlled using I2C.  This driver provides common support
1516           for accessing the device, additional drivers must be enabled in
1517           order to use the functionality of the device.
1518
1519 config MFD_WM831X_SPI
1520         bool "Wolfson Microelectronics WM831x/2x PMICs with SPI"
1521         select MFD_CORE
1522         select MFD_WM831X
1523         select REGMAP_SPI
1524         select IRQ_DOMAIN
1525         depends on SPI_MASTER
1526         help
1527           Support for the Wolfson Microelecronics WM831x and WM832x PMICs
1528           when controlled using SPI.  This driver provides common support
1529           for accessing the device, additional drivers must be enabled in
1530           order to use the functionality of the device.
1531
1532 config MFD_WM8350
1533         bool
1534
1535 config MFD_WM8350_I2C
1536         bool "Wolfson Microelectronics WM8350 with I2C"
1537         select MFD_WM8350
1538         depends on I2C=y
1539         help
1540           The WM8350 is an integrated audio and power management
1541           subsystem with watchdog and RTC functionality for embedded
1542           systems.  This option enables core support for the WM8350 with
1543           I2C as the control interface.  Additional options must be
1544           selected to enable support for the functionality of the chip.
1545
1546 config MFD_WM8994
1547         tristate "Wolfson Microelectronics WM8994"
1548         select MFD_CORE
1549         select REGMAP_I2C
1550         select REGMAP_IRQ
1551         depends on I2C
1552         help
1553           The WM8994 is a highly integrated hi-fi CODEC designed for
1554           smartphone applications.  As well as audio functionality it
1555           has on board GPIO and regulator functionality which is
1556           supported via the relevant subsystems.  This driver provides
1557           core support for the WM8994, in order to use the actual
1558           functionaltiy of the device other drivers must be enabled.
1559
1560 config MFD_STW481X
1561         tristate "Support for ST Microelectronics STw481x"
1562         depends on I2C && (ARCH_NOMADIK || COMPILE_TEST)
1563         select REGMAP_I2C
1564         select MFD_CORE
1565         help
1566           Select this option to enable the STw481x chip driver used
1567           in various ST Microelectronics and ST-Ericsson embedded
1568           Nomadik series.
1569
1570 menu "Multimedia Capabilities Port drivers"
1571         depends on ARCH_SA1100
1572
1573 config MCP
1574         tristate
1575
1576 # Interface drivers
1577 config MCP_SA11X0
1578         tristate "Support SA11x0 MCP interface"
1579         depends on ARCH_SA1100
1580         select MCP
1581
1582 # Chip drivers
1583 config MCP_UCB1200
1584         tristate "Support for UCB1200 / UCB1300"
1585         depends on MCP_SA11X0
1586         select MCP
1587
1588 config MCP_UCB1200_TS
1589         tristate "Touchscreen interface support"
1590         depends on MCP_UCB1200 && INPUT
1591
1592 endmenu
1593
1594 config MFD_VEXPRESS_SYSREG
1595         bool "Versatile Express System Registers"
1596         depends on VEXPRESS_CONFIG && GPIOLIB && !ARCH_USES_GETTIMEOFFSET
1597         default y
1598         select CLKSRC_MMIO
1599         select GPIO_GENERIC_PLATFORM
1600         select MFD_CORE
1601         select MFD_SYSCON
1602         help
1603           System Registers are the platform configuration block
1604           on the ARM Ltd. Versatile Express board.
1605
1606 endmenu
1607 endif