drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 menu "Multifunction device drivers"
   6         depends on HAS_IOMEM
   7
   8 config MFD_CORE
   9         tristate
  10         default n
  11
  12 config MFD_SM501
  13         tristate "Support for Silicon Motion SM501"
  14          ---help---
  15           This is the core driver for the Silicon Motion SM501 multimedia
  16           companion chip. This device is a multifunction device which may
  17           provide numerous interfaces including USB host controller, USB gadget,
  18           asynchronous serial ports, audio functions, and a dual display video
  19           interface. The device may be connected by PCI or local bus with
  20           varying functions enabled.
  21
  22 config MFD_SM501_GPIO
  23         bool "Export GPIO via GPIO layer"
  24         depends on MFD_SM501 && GPIOLIB
  25          ---help---
  26          This option uses the gpio library layer to export the 64 GPIO
  27          lines on the SM501. The platform data is used to supply the
  28          base number for the first GPIO line to register.
  29
  30 config MFD_ASIC3
  31         bool "Support for Compaq ASIC3"
  32         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  33         select MFD_CORE
  34          ---help---
  35           This driver supports the ASIC3 multifunction chip found on many
  36           PDAs (mainly iPAQ and HTC based ones)
  37
  38 config MFD_DM355EVM_MSP
  39         bool "DaVinci DM355 EVM microcontroller"
  40         depends on I2C && MACH_DAVINCI_DM355_EVM
  41         help
  42           This driver supports the MSP430 microcontroller used on these
  43           boards.  MSP430 firmware manages resets and power sequencing,
  44           inputs from buttons and the IR remote, LEDs, an RTC, and more.
  45
  46 config HTC_EGPIO
  47         bool "HTC EGPIO support"
  48         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  49         help
  50             This driver supports the CPLD egpio chip present on
  51             several HTC phones.  It provides basic support for input
  52             pins, output pins, and irqs.
  53
  54 config HTC_PASIC3
  55         tristate "HTC PASIC3 LED/DS1WM chip support"
  56         select MFD_CORE
  57         help
  58           This core driver provides register access for the LED/DS1WM
  59           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
  60           HTC Magician devices, respectively. Actual functionality is
  61           handled by the leds-pasic3 and ds1wm drivers.
  62
  63 config UCB1400_CORE
  64         tristate "Philips UCB1400 Core driver"
  65         depends on AC97_BUS
  66         depends on GPIOLIB
  67         help
  68           This enables support for the Philips UCB1400 core functions.
  69           The UCB1400 is an AC97 audio codec.
  70
  71           To compile this driver as a module, choose M here: the
  72           module will be called ucb1400_core.
  73
  74 config TPS65010
  75         tristate "TPS6501x Power Management chips"
  76         depends on I2C && GPIOLIB
  77         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
  78         help
  79           If you say yes here you get support for the TPS6501x series of
  80           Power Management chips.  These include voltage regulators,
  81           lithium ion/polymer battery charging, and other features that
  82           are often used in portable devices like cell phones and cameras.
  83
  84           This driver can also be built as a module.  If so, the module
  85           will be called tps65010.
  86
  87 config MENELAUS
  88         bool "Texas Instruments TWL92330/Menelaus PM chip"
  89         depends on I2C=y && ARCH_OMAP24XX
  90         help
  91           If you say yes here you get support for the Texas Instruments
  92           TWL92330/Menelaus Power Management chip. This include voltage
  93           regulators, Dual slot memory card transceivers, real-time clock
  94           and other features that are often used in portable devices like
  95           cell phones and PDAs.
  96
  97 config TWL4030_CORE
  98         bool "Texas Instruments TWL4030/TPS659x0 Support"
  99         depends on I2C=y && GENERIC_HARDIRQS
 100         help
 101           Say yes here if you have TWL4030 family chip on your board.
 102           This core driver provides register access and IRQ handling
 103           facilities, and registers devices for the various functions
 104           so that function-specific drivers can bind to them.
 105
 106           These multi-function chips are found on many OMAP2 and OMAP3
 107           boards, providing power management, RTC, GPIO, keypad, a
 108           high speed USB OTG transceiver, an audio codec (on most
 109           versions) and many other features.
 110
 111 config TWL4030_POWER
 112         bool "Support power resources on TWL4030 family chips"
 113         depends on TWL4030_CORE && ARM
 114         help
 115           Say yes here if you want to use the power resources on the
 116           TWL4030 family chips.  Most of these resources are regulators,
 117           which have a separate driver; some are control signals, such
 118           as clock request handshaking.
 119
 120           This driver uses board-specific data to initialize the resources
 121           and load scripts controling which resources are switched off/on
 122           or reset when a sleep, wakeup or warm reset event occurs.
 123
 124 config MFD_TMIO
 125         bool
 126         default n
 127
 128 config MFD_T7L66XB
 129         bool "Support Toshiba T7L66XB"
 130         depends on ARM && HAVE_CLK
 131         select MFD_CORE
 132         select MFD_TMIO
 133         help
 134           Support for Toshiba Mobile IO Controller T7L66XB
 135
 136 config MFD_TC6387XB
 137         bool "Support Toshiba TC6387XB"
 138         depends on ARM && HAVE_CLK
 139         select MFD_CORE
 140         select MFD_TMIO
 141         help
 142           Support for Toshiba Mobile IO Controller TC6387XB
 143
 144 config MFD_TC6393XB
 145         bool "Support Toshiba TC6393XB"
 146         depends on GPIOLIB && ARM
 147         select MFD_CORE
 148         select MFD_TMIO
 149         help
 150           Support for Toshiba Mobile IO Controller TC6393XB
 151
 152 config PMIC_DA903X
 153         bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 154         depends on I2C=y
 155         help
 156           Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
 157           ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 158           usually found on PXA processors-based platforms. This includes
 159           the I2C driver and the core APIs _only_, you have to select
 160           individual components like LCD backlight, voltage regulators,
 161           LEDs and battery-charger under the corresponding menus.
 162
 163 config MFD_WM8400
 164         tristate "Support Wolfson Microelectronics WM8400"
 165         select MFD_CORE
 166         depends on I2C
 167         help
 168           Support for the Wolfson Microelecronics WM8400 PMIC and audio
 169           CODEC.  This driver provides common support for accessing
 170           the device, additional drivers must be enabled in order to use
 171           the functionality of the device.
 172
 173 config MFD_WM831X
 174         tristate "Support Wolfson Microelectronics WM831x PMICs"
 175         select MFD_CORE
 176         depends on I2C
 177         help
 178           Support for the Wolfson Microelecronics WM831x PMICs.  This
 179           driver provides common support for accessing the device,
 180           additional drivers must be enabled in order to use the
 181           functionality of the device.
 182
 183 config MFD_WM8350
 184         tristate
 185
 186 config MFD_WM8350_CONFIG_MODE_0
 187         bool
 188         depends on MFD_WM8350
 189
 190 config MFD_WM8350_CONFIG_MODE_1
 191         bool
 192         depends on MFD_WM8350
 193
 194 config MFD_WM8350_CONFIG_MODE_2
 195         bool
 196         depends on MFD_WM8350
 197
 198 config MFD_WM8350_CONFIG_MODE_3
 199         bool
 200         depends on MFD_WM8350
 201
 202 config MFD_WM8351_CONFIG_MODE_0
 203         bool
 204         depends on MFD_WM8350
 205
 206 config MFD_WM8351_CONFIG_MODE_1
 207         bool
 208         depends on MFD_WM8350
 209
 210 config MFD_WM8351_CONFIG_MODE_2
 211         bool
 212         depends on MFD_WM8350
 213
 214 config MFD_WM8351_CONFIG_MODE_3
 215         bool
 216         depends on MFD_WM8350
 217
 218 config MFD_WM8352_CONFIG_MODE_0
 219         bool
 220         depends on MFD_WM8350
 221
 222 config MFD_WM8352_CONFIG_MODE_1
 223         bool
 224         depends on MFD_WM8350
 225
 226 config MFD_WM8352_CONFIG_MODE_2
 227         bool
 228         depends on MFD_WM8350
 229
 230 config MFD_WM8352_CONFIG_MODE_3
 231         bool
 232         depends on MFD_WM8350
 233
 234 config MFD_WM8350_I2C
 235         tristate "Support Wolfson Microelectronics WM8350 with I2C"
 236         select MFD_WM8350
 237         depends on I2C
 238         help
 239           The WM8350 is an integrated audio and power management
 240           subsystem with watchdog and RTC functionality for embedded
 241           systems.  This option enables core support for the WM8350 with
 242           I2C as the control interface.  Additional options must be
 243           selected to enable support for the functionality of the chip.
 244
 245 config MFD_PCF50633
 246         tristate "Support for NXP PCF50633"
 247         depends on I2C
 248         help
 249           Say yes here if you have NXP PCF50633 chip on your board.
 250           This core driver provides register access and IRQ handling
 251           facilities, and registers devices for the various functions
 252           so that function-specific drivers can bind to them.
 253
 254 config MFD_MC13783
 255         tristate "Support Freescale MC13783"
 256         depends on SPI_MASTER
 257         select MFD_CORE
 258         help
 259           Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
 260           This driver provides common support for accessing  the device,
 261           additional drivers must be enabled in order to use the
 262           functionality of the device.
 263
 264 config PCF50633_ADC
 265         tristate "Support for NXP PCF50633 ADC"
 266         depends on MFD_PCF50633
 267         help
 268          Say yes here if you want to include support for ADC in the
 269          NXP PCF50633 chip.
 270
 271 config PCF50633_GPIO
 272         tristate "Support for NXP PCF50633 GPIO"
 273         depends on MFD_PCF50633
 274         help
 275          Say yes here if you want to include support GPIO for pins on
 276          the PCF50633 chip.
 277
 278 config AB3100_CORE
 279         tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
 280         depends on I2C
 281         default y if ARCH_U300
 282         help
 283           Select this to enable the AB3100 Mixed Signal IC core
 284           functionality. This connects to a AB3100 on the I2C bus
 285           and expose a number of symbols needed for dependent devices
 286           to read and write registers and subscribe to events from
 287           this multi-functional IC. This is needed to use other features
 288           of the AB3100 such as battery-backed RTC, charging control,
 289           LEDs, vibrator, system power and temperature, power management
 290           and ALSA sound.
 291
 292 config AB3100_OTP
 293         tristate "ST-Ericsson AB3100 OTP functions"
 294         depends on AB3100_CORE
 295         default y if AB3100_CORE
 296         help
 297           Select this to enable the AB3100 Mixed Signal IC OTP (one-time
 298           programmable memory) support. This exposes a sysfs file to read
 299           out OTP values.
 300
 301 config EZX_PCAP
 302         bool "PCAP Support"
 303         depends on GENERIC_HARDIRQS && SPI_MASTER
 304         help
 305           This enables the PCAP ASIC present on EZX Phones. This is
 306           needed for MMC, TouchScreen, Sound, USB, etc..
 307
 308 endmenu
 309
 310 menu "Multimedia Capabilities Port drivers"
 311         depends on ARCH_SA1100
 312
 313 config MCP
 314         tristate
 315
 316 # Interface drivers
 317 config MCP_SA11X0
 318         tristate "Support SA11x0 MCP interface"
 319         depends on ARCH_SA1100
 320         select MCP
 321
 322 # Chip drivers
 323 config MCP_UCB1200
 324         tristate "Support for UCB1200 / UCB1300"
 325         depends on MCP
 326
 327 config MCP_UCB1200_TS
 328         tristate "Touchscreen interface support"
 329         depends on MCP_UCB1200 && INPUT
 330
 331 endmenu