drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 menu "Multifunction device drivers"
   6         depends on HAS_IOMEM
   7
   8 config MFD_CORE
   9         tristate
  10         default n
  11
  12 config MFD_SM501
  13         tristate "Support for Silicon Motion SM501"
  14          ---help---
  15           This is the core driver for the Silicon Motion SM501 multimedia
  16           companion chip. This device is a multifunction device which may
  17           provide numerous interfaces including USB host controller, USB gadget,
  18           asynchronous serial ports, audio functions, and a dual display video
  19           interface. The device may be connected by PCI or local bus with
  20           varying functions enabled.
  21
  22 config MFD_SM501_GPIO
  23         bool "Export GPIO via GPIO layer"
  24         depends on MFD_SM501 && GPIOLIB
  25          ---help---
  26          This option uses the gpio library layer to export the 64 GPIO
  27          lines on the SM501. The platform data is used to supply the
  28          base number for the first GPIO line to register.
  29
  30 config MFD_ASIC3
  31         bool "Support for Compaq ASIC3"
  32         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  33          ---help---
  34           This driver supports the ASIC3 multifunction chip found on many
  35           PDAs (mainly iPAQ and HTC based ones)
  36
  37 config HTC_EGPIO
  38         bool "HTC EGPIO support"
  39         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  40         help
  41             This driver supports the CPLD egpio chip present on
  42             several HTC phones.  It provides basic support for input
  43             pins, output pins, and irqs.
  44
  45 config HTC_PASIC3
  46         tristate "HTC PASIC3 LED/DS1WM chip support"
  47         help
  48           This core driver provides register access for the LED/DS1WM
  49           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
  50           HTC Magician devices, respectively. Actual functionality is
  51           handled by the leds-pasic3 and ds1wm drivers.
  52
  53 config UCB1400_CORE
  54         tristate "Philips UCB1400 Core driver"
  55         depends on AC97_BUS
  56         help
  57           This enables support for the Philips UCB1400 core functions.
  58           The UCB1400 is an AC97 audio codec.
  59
  60           To compile this driver as a module, choose M here: the
  61           module will be called ucb1400_core.
  62
  63 config TWL4030_CORE
  64         bool "Texas Instruments TWL4030/TPS659x0 Support"
  65         depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3)
  66         help
  67           Say yes here if you have TWL4030 family chip on your board.
  68           This core driver provides register access and IRQ handling
  69           facilities, and registers devices for the various functions
  70           so that function-specific drivers can bind to them.
  71
  72           These multi-function chips are found on many OMAP2 and OMAP3
  73           boards, providing power management, RTC, GPIO, keypad, a
  74           high speed USB OTG transceiver, an audio codec (on most
  75           versions) and many other features.
  76
  77 config MFD_TMIO
  78         bool
  79         default n
  80
  81 config MFD_T7L66XB
  82         bool "Support Toshiba T7L66XB"
  83         depends on ARM
  84         select MFD_CORE
  85         select MFD_TMIO
  86         help
  87           Support for Toshiba Mobile IO Controller T7L66XB
  88
  89 config MFD_TC6387XB
  90         bool "Support Toshiba TC6387XB"
  91         depends on ARM
  92         select MFD_CORE
  93         select MFD_TMIO
  94         help
  95           Support for Toshiba Mobile IO Controller TC6387XB
  96
  97 config MFD_TC6393XB
  98         bool "Support Toshiba TC6393XB"
  99         depends on GPIOLIB && ARM
 100         select MFD_CORE
 101         select MFD_TMIO
 102         help
 103           Support for Toshiba Mobile IO Controller TC6393XB
 104
 105 config MFD_WM8400
 106         tristate "Support Wolfson Microelectronics WM8400"
 107         help
 108           Support for the Wolfson Microelecronics WM8400 PMIC and audio
 109           CODEC.  This driver adds provides common support for accessing
 110           the device, additional drivers must be enabled in order to use
 111           the functionality of the device.
 112
 113 config MFD_WM8350
 114         tristate
 115
 116 config MFD_WM8350_CONFIG_MODE_0
 117         bool
 118         depends on MFD_WM8350
 119
 120 config MFD_WM8350_CONFIG_MODE_1
 121         bool
 122         depends on MFD_WM8350
 123
 124 config MFD_WM8350_CONFIG_MODE_2
 125         bool
 126         depends on MFD_WM8350
 127
 128 config MFD_WM8350_CONFIG_MODE_3
 129         bool
 130         depends on MFD_WM8350
 131
 132 config MFD_WM8350_I2C
 133         tristate "Support Wolfson Microelectronics WM8350 with I2C"
 134         select MFD_WM8350
 135         depends on I2C
 136         help
 137           The WM8350 is an integrated audio and power management
 138           subsystem with watchdog and RTC functionality for embedded
 139           systems.  This option enables core support for the WM8350 with
 140           I2C as the control interface.  Additional options must be
 141           selected to enable support for the functionality of the chip.
 142
 143 endmenu
 144
 145 menu "Multimedia Capabilities Port drivers"
 146         depends on ARCH_SA1100
 147
 148 config MCP
 149         tristate
 150
 151 # Interface drivers
 152 config MCP_SA11X0
 153         tristate "Support SA11x0 MCP interface"
 154         depends on ARCH_SA1100
 155         select MCP
 156
 157 # Chip drivers
 158 config MCP_UCB1200
 159         tristate "Support for UCB1200 / UCB1300"
 160         depends on MCP
 161
 162 config MCP_UCB1200_TS
 163         tristate "Touchscreen interface support"
 164         depends on MCP_UCB1200 && INPUT
 165
 166 endmenu