drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 menu "Multifunction device drivers"
   6         depends on HAS_IOMEM
   7
   8 config MFD_CORE
   9         tristate
  10         default n
  11
  12 config MFD_SM501
  13         tristate "Support for Silicon Motion SM501"
  14          ---help---
  15           This is the core driver for the Silicon Motion SM501 multimedia
  16           companion chip. This device is a multifunction device which may
  17           provide numerous interfaces including USB host controller, USB gadget,
  18           asynchronous serial ports, audio functions, and a dual display video
  19           interface. The device may be connected by PCI or local bus with
  20           varying functions enabled.
  21
  22 config MFD_SM501_GPIO
  23         bool "Export GPIO via GPIO layer"
  24         depends on MFD_SM501 && GPIOLIB
  25          ---help---
  26          This option uses the gpio library layer to export the 64 GPIO
  27          lines on the SM501. The platform data is used to supply the
  28          base number for the first GPIO line to register.
  29
  30 config MFD_ASIC3
  31         bool "Support for Compaq ASIC3"
  32         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  33          ---help---
  34           This driver supports the ASIC3 multifunction chip found on many
  35           PDAs (mainly iPAQ and HTC based ones)
  36
  37 config HTC_EGPIO
  38         bool "HTC EGPIO support"
  39         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  40         help
  41             This driver supports the CPLD egpio chip present on
  42             several HTC phones.  It provides basic support for input
  43             pins, output pins, and irqs.
  44
  45 config HTC_PASIC3
  46         tristate "HTC PASIC3 LED/DS1WM chip support"
  47         help
  48           This core driver provides register access for the LED/DS1WM
  49           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
  50           HTC Magician devices, respectively. Actual functionality is
  51           handled by the leds-pasic3 and ds1wm drivers.
  52
  53 config UCB1400_CORE
  54         tristate "Philips UCB1400 Core driver"
  55         depends on AC97_BUS
  56         depends on GPIOLIB
  57         help
  58           This enables support for the Philips UCB1400 core functions.
  59           The UCB1400 is an AC97 audio codec.
  60
  61           To compile this driver as a module, choose M here: the
  62           module will be called ucb1400_core.
  63
  64 config TWL4030_CORE
  65         bool "Texas Instruments TWL4030/TPS659x0 Support"
  66         depends on I2C=y && GENERIC_HARDIRQS && (ARCH_OMAP2 || ARCH_OMAP3)
  67         help
  68           Say yes here if you have TWL4030 family chip on your board.
  69           This core driver provides register access and IRQ handling
  70           facilities, and registers devices for the various functions
  71           so that function-specific drivers can bind to them.
  72
  73           These multi-function chips are found on many OMAP2 and OMAP3
  74           boards, providing power management, RTC, GPIO, keypad, a
  75           high speed USB OTG transceiver, an audio codec (on most
  76           versions) and many other features.
  77
  78 config MFD_TMIO
  79         bool
  80         default n
  81
  82 config MFD_T7L66XB
  83         bool "Support Toshiba T7L66XB"
  84         depends on ARM
  85         select MFD_CORE
  86         select MFD_TMIO
  87         help
  88           Support for Toshiba Mobile IO Controller T7L66XB
  89
  90 config MFD_TC6387XB
  91         bool "Support Toshiba TC6387XB"
  92         depends on ARM
  93         select MFD_CORE
  94         select MFD_TMIO
  95         help
  96           Support for Toshiba Mobile IO Controller TC6387XB
  97
  98 config MFD_TC6393XB
  99         bool "Support Toshiba TC6393XB"
 100         depends on GPIOLIB && ARM
 101         select MFD_CORE
 102         select MFD_TMIO
 103         help
 104           Support for Toshiba Mobile IO Controller TC6393XB
 105
 106 config MFD_WM8400
 107         tristate "Support Wolfson Microelectronics WM8400"
 108         help
 109           Support for the Wolfson Microelecronics WM8400 PMIC and audio
 110           CODEC.  This driver adds provides common support for accessing
 111           the device, additional drivers must be enabled in order to use
 112           the functionality of the device.
 113
 114 config MFD_WM8350
 115         tristate
 116
 117 config MFD_WM8350_CONFIG_MODE_0
 118         bool
 119         depends on MFD_WM8350
 120
 121 config MFD_WM8350_CONFIG_MODE_1
 122         bool
 123         depends on MFD_WM8350
 124
 125 config MFD_WM8350_CONFIG_MODE_2
 126         bool
 127         depends on MFD_WM8350
 128
 129 config MFD_WM8350_CONFIG_MODE_3
 130         bool
 131         depends on MFD_WM8350
 132
 133 config MFD_WM8350_I2C
 134         tristate "Support Wolfson Microelectronics WM8350 with I2C"
 135         select MFD_WM8350
 136         depends on I2C
 137         help
 138           The WM8350 is an integrated audio and power management
 139           subsystem with watchdog and RTC functionality for embedded
 140           systems.  This option enables core support for the WM8350 with
 141           I2C as the control interface.  Additional options must be
 142           selected to enable support for the functionality of the chip.
 143
 144 endmenu
 145
 146 menu "Multimedia Capabilities Port drivers"
 147         depends on ARCH_SA1100
 148
 149 config MCP
 150         tristate
 151
 152 # Interface drivers
 153 config MCP_SA11X0
 154         tristate "Support SA11x0 MCP interface"
 155         depends on ARCH_SA1100
 156         select MCP
 157
 158 # Chip drivers
 159 config MCP_UCB1200
 160         tristate "Support for UCB1200 / UCB1300"
 161         depends on MCP
 162
 163 config MCP_UCB1200_TS
 164         tristate "Touchscreen interface support"
 165         depends on MCP_UCB1200 && INPUT
 166
 167 endmenu