drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 menu "Multifunction device drivers"
   6         depends on HAS_IOMEM
   7
   8 config MFD_CORE
   9         tristate
  10         default n
  11
  12 config MFD_88PM860X
  13         bool "Support Marvell 88PM8606/88PM8607"
  14         depends on I2C=y && GENERIC_HARDIRQS
  15         select MFD_CORE
  16         help
  17           This supports for Marvell 88PM8606/88PM8607 Power Management IC.
  18           This includes the I2C driver and the core APIs _only_, you have to
  19           select individual components like voltage regulators, RTC and
  20           battery-charger under the corresponding menus.
  21
  22 config MFD_SM501
  23         tristate "Support for Silicon Motion SM501"
  24          ---help---
  25           This is the core driver for the Silicon Motion SM501 multimedia
  26           companion chip. This device is a multifunction device which may
  27           provide numerous interfaces including USB host controller, USB gadget,
  28           asynchronous serial ports, audio functions, and a dual display video
  29           interface. The device may be connected by PCI or local bus with
  30           varying functions enabled.
  31
  32 config MFD_SM501_GPIO
  33         bool "Export GPIO via GPIO layer"
  34         depends on MFD_SM501 && GPIOLIB
  35          ---help---
  36          This option uses the gpio library layer to export the 64 GPIO
  37          lines on the SM501. The platform data is used to supply the
  38          base number for the first GPIO line to register.
  39
  40 config MFD_ASIC3
  41         bool "Support for Compaq ASIC3"
  42         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  43         select MFD_CORE
  44          ---help---
  45           This driver supports the ASIC3 multifunction chip found on many
  46           PDAs (mainly iPAQ and HTC based ones)
  47
  48 config MFD_SH_MOBILE_SDHI
  49         bool "Support for SuperH Mobile SDHI"
  50         depends on SUPERH || ARCH_SHMOBILE
  51         select MFD_CORE
  52         select TMIO_MMC_DMA
  53          ---help---
  54           This driver supports the SDHI hardware block found in many
  55           SuperH Mobile SoCs.
  56
  57 config MFD_DAVINCI_VOICECODEC
  58         tristate
  59         select MFD_CORE
  60
  61 config MFD_DM355EVM_MSP
  62         bool "DaVinci DM355 EVM microcontroller"
  63         depends on I2C && MACH_DAVINCI_DM355_EVM
  64         help
  65           This driver supports the MSP430 microcontroller used on these
  66           boards.  MSP430 firmware manages resets and power sequencing,
  67           inputs from buttons and the IR remote, LEDs, an RTC, and more.
  68
  69 config HTC_EGPIO
  70         bool "HTC EGPIO support"
  71         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  72         help
  73             This driver supports the CPLD egpio chip present on
  74             several HTC phones.  It provides basic support for input
  75             pins, output pins, and irqs.
  76
  77 config HTC_PASIC3
  78         tristate "HTC PASIC3 LED/DS1WM chip support"
  79         select MFD_CORE
  80         help
  81           This core driver provides register access for the LED/DS1WM
  82           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
  83           HTC Magician devices, respectively. Actual functionality is
  84           handled by the leds-pasic3 and ds1wm drivers.
  85
  86 config HTC_I2CPLD
  87         bool "HTC I2C PLD chip support"
  88         depends on I2C=y && GPIOLIB
  89         help
  90           If you say yes here you get support for the supposed CPLD
  91           found on omap850 HTC devices like the HTC Wizard and HTC Herald.
  92           This device provides input and output GPIOs through an I2C
  93           interface to one or more sub-chips.
  94
  95 config UCB1400_CORE
  96         tristate "Philips UCB1400 Core driver"
  97         depends on AC97_BUS
  98         depends on GPIOLIB
  99         help
 100           This enables support for the Philips UCB1400 core functions.
 101           The UCB1400 is an AC97 audio codec.
 102
 103           To compile this driver as a module, choose M here: the
 104           module will be called ucb1400_core.
 105
 106 config TPS65010
 107         tristate "TPS6501x Power Management chips"
 108         depends on I2C && GPIOLIB
 109         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
 110         help
 111           If you say yes here you get support for the TPS6501x series of
 112           Power Management chips.  These include voltage regulators,
 113           lithium ion/polymer battery charging, and other features that
 114           are often used in portable devices like cell phones and cameras.
 115
 116           This driver can also be built as a module.  If so, the module
 117           will be called tps65010.
 118
 119 config TPS6507X
 120         tristate "TPS6507x Power Management / Touch Screen chips"
 121         select MFD_CORE
 122         depends on I2C
 123         help
 124           If you say yes here you get support for the TPS6507x series of
 125           Power Management / Touch Screen chips.  These include voltage
 126           regulators, lithium ion/polymer battery charging, touch screen
 127           and other features that are often used in portable devices.
 128           This driver can also be built as a module.  If so, the module
 129           will be called tps6507x.
 130
 131 config MENELAUS
 132         bool "Texas Instruments TWL92330/Menelaus PM chip"
 133         depends on I2C=y && ARCH_OMAP2
 134         help
 135           If you say yes here you get support for the Texas Instruments
 136           TWL92330/Menelaus Power Management chip. This include voltage
 137           regulators, Dual slot memory card transceivers, real-time clock
 138           and other features that are often used in portable devices like
 139           cell phones and PDAs.
 140
 141 config TWL4030_CORE
 142         bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
 143         depends on I2C=y && GENERIC_HARDIRQS
 144         help
 145           Say yes here if you have TWL4030 / TWL6030 family chip on your board.
 146           This core driver provides register access and IRQ handling
 147           facilities, and registers devices for the various functions
 148           so that function-specific drivers can bind to them.
 149
 150           These multi-function chips are found on many OMAP2 and OMAP3
 151           boards, providing power management, RTC, GPIO, keypad, a
 152           high speed USB OTG transceiver, an audio codec (on most
 153           versions) and many other features.
 154
 155 config TWL4030_POWER
 156         bool "Support power resources on TWL4030 family chips"
 157         depends on TWL4030_CORE && ARM
 158         help
 159           Say yes here if you want to use the power resources on the
 160           TWL4030 family chips.  Most of these resources are regulators,
 161           which have a separate driver; some are control signals, such
 162           as clock request handshaking.
 163
 164           This driver uses board-specific data to initialize the resources
 165           and load scripts controling which resources are switched off/on
 166           or reset when a sleep, wakeup or warm reset event occurs.
 167
 168 config TWL4030_CODEC
 169         bool
 170         depends on TWL4030_CORE
 171         select MFD_CORE
 172         default n
 173
 174 config MFD_TC35892
 175         bool "Support Toshiba TC35892"
 176         depends on I2C=y && GENERIC_HARDIRQS
 177         select MFD_CORE
 178         help
 179           Support for the Toshiba TC35892 I/O Expander.
 180
 181           This driver provides common support for accessing the device,
 182           additional drivers must be enabled in order to use the
 183           functionality of the device.
 184
 185 config MFD_TMIO
 186         bool
 187         default n
 188
 189 config TMIO_MMC_DMA
 190         bool
 191         select DMA_ENGINE
 192         select DMADEVICES
 193
 194 config MFD_T7L66XB
 195         bool "Support Toshiba T7L66XB"
 196         depends on ARM && HAVE_CLK
 197         select MFD_CORE
 198         select MFD_TMIO
 199         help
 200           Support for Toshiba Mobile IO Controller T7L66XB
 201
 202 config MFD_TC6387XB
 203         bool "Support Toshiba TC6387XB"
 204         depends on ARM && HAVE_CLK
 205         select MFD_CORE
 206         select MFD_TMIO
 207         help
 208           Support for Toshiba Mobile IO Controller TC6387XB
 209
 210 config MFD_TC6393XB
 211         bool "Support Toshiba TC6393XB"
 212         depends on GPIOLIB && ARM
 213         select MFD_CORE
 214         select MFD_TMIO
 215         help
 216           Support for Toshiba Mobile IO Controller TC6393XB
 217
 218 config PMIC_DA903X
 219         bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 220         depends on I2C=y
 221         help
 222           Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
 223           ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 224           usually found on PXA processors-based platforms. This includes
 225           the I2C driver and the core APIs _only_, you have to select
 226           individual components like LCD backlight, voltage regulators,
 227           LEDs and battery-charger under the corresponding menus.
 228
 229 config PMIC_ADP5520
 230         bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
 231         depends on I2C=y
 232         help
 233           Say yes here to add support for Analog Devices AD5520 and ADP5501,
 234           Multifunction Power Management IC. This includes
 235           the I2C driver and the core APIs _only_, you have to select
 236           individual components like LCD backlight, LEDs, GPIOs and Kepad
 237           under the corresponding menus.
 238
 239 config MFD_MAX8925
 240         bool "Maxim Semiconductor MAX8925 PMIC Support"
 241         depends on I2C=y && GENERIC_HARDIRQS
 242         select MFD_CORE
 243         help
 244           Say yes here to support for Maxim Semiconductor MAX8925. This is
 245           a Power Management IC. This driver provies common support for
 246           accessing the device, additional drivers must be enabled in order
 247           to use the functionality of the device.
 248
 249 config MFD_WM8400
 250         tristate "Support Wolfson Microelectronics WM8400"
 251         select MFD_CORE
 252         depends on I2C
 253         help
 254           Support for the Wolfson Microelecronics WM8400 PMIC and audio
 255           CODEC.  This driver provides common support for accessing
 256           the device, additional drivers must be enabled in order to use
 257           the functionality of the device.
 258
 259 config MFD_WM831X
 260         bool "Support Wolfson Microelectronics WM831x/2x PMICs"
 261         select MFD_CORE
 262         depends on I2C=y && GENERIC_HARDIRQS
 263         help
 264           Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
 265           This driver provides common support for accessing the device,
 266           additional drivers must be enabled in order to use the
 267           functionality of the device.
 268
 269 config MFD_WM8350
 270         bool
 271         depends on GENERIC_HARDIRQS
 272
 273 config MFD_WM8350_CONFIG_MODE_0
 274         bool
 275         depends on MFD_WM8350
 276
 277 config MFD_WM8350_CONFIG_MODE_1
 278         bool
 279         depends on MFD_WM8350
 280
 281 config MFD_WM8350_CONFIG_MODE_2
 282         bool
 283         depends on MFD_WM8350
 284
 285 config MFD_WM8350_CONFIG_MODE_3
 286         bool
 287         depends on MFD_WM8350
 288
 289 config MFD_WM8351_CONFIG_MODE_0
 290         bool
 291         depends on MFD_WM8350
 292
 293 config MFD_WM8351_CONFIG_MODE_1
 294         bool
 295         depends on MFD_WM8350
 296
 297 config MFD_WM8351_CONFIG_MODE_2
 298         bool
 299         depends on MFD_WM8350
 300
 301 config MFD_WM8351_CONFIG_MODE_3
 302         bool
 303         depends on MFD_WM8350
 304
 305 config MFD_WM8352_CONFIG_MODE_0
 306         bool
 307         depends on MFD_WM8350
 308
 309 config MFD_WM8352_CONFIG_MODE_1
 310         bool
 311         depends on MFD_WM8350
 312
 313 config MFD_WM8352_CONFIG_MODE_2
 314         bool
 315         depends on MFD_WM8350
 316
 317 config MFD_WM8352_CONFIG_MODE_3
 318         bool
 319         depends on MFD_WM8350
 320
 321 config MFD_WM8350_I2C
 322         bool "Support Wolfson Microelectronics WM8350 with I2C"
 323         select MFD_WM8350
 324         depends on I2C=y && GENERIC_HARDIRQS
 325         help
 326           The WM8350 is an integrated audio and power management
 327           subsystem with watchdog and RTC functionality for embedded
 328           systems.  This option enables core support for the WM8350 with
 329           I2C as the control interface.  Additional options must be
 330           selected to enable support for the functionality of the chip.
 331
 332 config MFD_WM8994
 333         bool "Support Wolfson Microelectronics WM8994"
 334         select MFD_CORE
 335         depends on I2C=y && GENERIC_HARDIRQS
 336         help
 337           The WM8994 is a highly integrated hi-fi CODEC designed for
 338           smartphone applicatiosn.  As well as audio functionality it
 339           has on board GPIO and regulator functionality which is
 340           supported via the relevant subsystems.  This driver provides
 341           core support for the WM8994, in order to use the actual
 342           functionaltiy of the device other drivers must be enabled.
 343
 344 config MFD_PCF50633
 345         tristate "Support for NXP PCF50633"
 346         depends on I2C
 347         help
 348           Say yes here if you have NXP PCF50633 chip on your board.
 349           This core driver provides register access and IRQ handling
 350           facilities, and registers devices for the various functions
 351           so that function-specific drivers can bind to them.
 352
 353 config MFD_MC13783
 354         tristate "Support Freescale MC13783"
 355         depends on SPI_MASTER
 356         select MFD_CORE
 357         help
 358           Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
 359           This driver provides common support for accessing  the device,
 360           additional drivers must be enabled in order to use the
 361           functionality of the device.
 362
 363 config PCF50633_ADC
 364         tristate "Support for NXP PCF50633 ADC"
 365         depends on MFD_PCF50633
 366         help
 367          Say yes here if you want to include support for ADC in the
 368          NXP PCF50633 chip.
 369
 370 config PCF50633_GPIO
 371         tristate "Support for NXP PCF50633 GPIO"
 372         depends on MFD_PCF50633
 373         help
 374          Say yes here if you want to include support GPIO for pins on
 375          the PCF50633 chip.
 376
 377 config AB3100_CORE
 378         bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
 379         depends on I2C=y
 380         default y if ARCH_U300
 381         help
 382           Select this to enable the AB3100 Mixed Signal IC core
 383           functionality. This connects to a AB3100 on the I2C bus
 384           and expose a number of symbols needed for dependent devices
 385           to read and write registers and subscribe to events from
 386           this multi-functional IC. This is needed to use other features
 387           of the AB3100 such as battery-backed RTC, charging control,
 388           LEDs, vibrator, system power and temperature, power management
 389           and ALSA sound.
 390
 391 config AB3100_OTP
 392         tristate "ST-Ericsson AB3100 OTP functions"
 393         depends on AB3100_CORE
 394         default y if AB3100_CORE
 395         help
 396           Select this to enable the AB3100 Mixed Signal IC OTP (one-time
 397           programmable memory) support. This exposes a sysfs file to read
 398           out OTP values.
 399
 400 config EZX_PCAP
 401         bool "PCAP Support"
 402         depends on GENERIC_HARDIRQS && SPI_MASTER
 403         help
 404           This enables the PCAP ASIC present on EZX Phones. This is
 405           needed for MMC, TouchScreen, Sound, USB, etc..
 406
 407 config AB4500_CORE
 408         tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
 409         depends on SPI
 410         help
 411           Select this option to enable access to AB4500 power management
 412           chip. This connects to U8500 on the SSP/SPI bus and exports
 413           read/write functions for the devices to get access to this chip.
 414           This chip embeds various other multimedia funtionalities as well.
 415
 416 config MFD_TIMBERDALE
 417         tristate "Support for the Timberdale FPGA"
 418         select MFD_CORE
 419         depends on PCI && GPIOLIB
 420         ---help---
 421         This is the core driver for the timberdale FPGA. This device is a
 422         multifunction device which exposes numerous platform devices.
 423
 424         The timberdale FPGA can be found on the Intel Atom development board
 425         for in-vehicle infontainment, called Russellville.
 426
 427 config LPC_SCH
 428         tristate "Intel SCH LPC"
 429         depends on PCI
 430         select MFD_CORE
 431         help
 432           LPC bridge function of the Intel SCH provides support for
 433           System Management Bus and General Purpose I/O.
 434
 435 config MFD_RDC321X
 436         tristate "Support for RDC-R321x southbridge"
 437         select MFD_CORE
 438         depends on PCI
 439         help
 440           Say yes here if you want to have support for the RDC R-321x SoC
 441           southbridge which provides access to GPIOs and Watchdog using the
 442           southbridge PCI device configuration space.
 443
 444 config MFD_JANZ_CMODIO
 445         tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board"
 446         select MFD_CORE
 447         depends on PCI
 448         help
 449           This is the core driver for the Janz CMOD-IO PCI MODULbus
 450           carrier board. This device is a PCI to MODULbus bridge which may
 451           host many different types of MODULbus daughterboards, including
 452           CAN and GPIO controllers.
 453
 454 endmenu
 455
 456 menu "Multimedia Capabilities Port drivers"
 457         depends on ARCH_SA1100
 458
 459 config MCP
 460         tristate
 461
 462 # Interface drivers
 463 config MCP_SA11X0
 464         tristate "Support SA11x0 MCP interface"
 465         depends on ARCH_SA1100
 466         select MCP
 467
 468 # Chip drivers
 469 config MCP_UCB1200
 470         tristate "Support for UCB1200 / UCB1300"
 471         depends on MCP
 472
 473 config MCP_UCB1200_TS
 474         tristate "Touchscreen interface support"
 475         depends on MCP_UCB1200 && INPUT
 476
 477 endmenu