drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 menu "Multifunction device drivers"
   6         depends on HAS_IOMEM
   7
   8 config MFD_CORE
   9         tristate
  10         default n
  11
  12 config MFD_SM501
  13         tristate "Support for Silicon Motion SM501"
  14          ---help---
  15           This is the core driver for the Silicon Motion SM501 multimedia
  16           companion chip. This device is a multifunction device which may
  17           provide numerous interfaces including USB host controller, USB gadget,
  18           asynchronous serial ports, audio functions, and a dual display video
  19           interface. The device may be connected by PCI or local bus with
  20           varying functions enabled.
  21
  22 config MFD_SM501_GPIO
  23         bool "Export GPIO via GPIO layer"
  24         depends on MFD_SM501 && GPIOLIB
  25          ---help---
  26          This option uses the gpio library layer to export the 64 GPIO
  27          lines on the SM501. The platform data is used to supply the
  28          base number for the first GPIO line to register.
  29
  30 config MFD_ASIC3
  31         bool "Support for Compaq ASIC3"
  32         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  33         select MFD_CORE
  34          ---help---
  35           This driver supports the ASIC3 multifunction chip found on many
  36           PDAs (mainly iPAQ and HTC based ones)
  37
  38 config MFD_SH_MOBILE_SDHI
  39         bool "Support for SuperH Mobile SDHI"
  40         depends on SUPERH
  41         select MFD_CORE
  42          ---help---
  43           This driver supports the SDHI hardware block found in many
  44           SuperH Mobile SoCs.
  45
  46 config MFD_DM355EVM_MSP
  47         bool "DaVinci DM355 EVM microcontroller"
  48         depends on I2C && MACH_DAVINCI_DM355_EVM
  49         help
  50           This driver supports the MSP430 microcontroller used on these
  51           boards.  MSP430 firmware manages resets and power sequencing,
  52           inputs from buttons and the IR remote, LEDs, an RTC, and more.
  53
  54 config HTC_EGPIO
  55         bool "HTC EGPIO support"
  56         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  57         help
  58             This driver supports the CPLD egpio chip present on
  59             several HTC phones.  It provides basic support for input
  60             pins, output pins, and irqs.
  61
  62 config HTC_PASIC3
  63         tristate "HTC PASIC3 LED/DS1WM chip support"
  64         select MFD_CORE
  65         help
  66           This core driver provides register access for the LED/DS1WM
  67           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
  68           HTC Magician devices, respectively. Actual functionality is
  69           handled by the leds-pasic3 and ds1wm drivers.
  70
  71 config UCB1400_CORE
  72         tristate "Philips UCB1400 Core driver"
  73         depends on AC97_BUS
  74         depends on GPIOLIB
  75         help
  76           This enables support for the Philips UCB1400 core functions.
  77           The UCB1400 is an AC97 audio codec.
  78
  79           To compile this driver as a module, choose M here: the
  80           module will be called ucb1400_core.
  81
  82 config TPS65010
  83         tristate "TPS6501x Power Management chips"
  84         depends on I2C && GPIOLIB
  85         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
  86         help
  87           If you say yes here you get support for the TPS6501x series of
  88           Power Management chips.  These include voltage regulators,
  89           lithium ion/polymer battery charging, and other features that
  90           are often used in portable devices like cell phones and cameras.
  91
  92           This driver can also be built as a module.  If so, the module
  93           will be called tps65010.
  94
  95 config MENELAUS
  96         bool "Texas Instruments TWL92330/Menelaus PM chip"
  97         depends on I2C=y && ARCH_OMAP24XX
  98         help
  99           If you say yes here you get support for the Texas Instruments
 100           TWL92330/Menelaus Power Management chip. This include voltage
 101           regulators, Dual slot memory card transceivers, real-time clock
 102           and other features that are often used in portable devices like
 103           cell phones and PDAs.
 104
 105 config TWL4030_CORE
 106         bool "Texas Instruments TWL4030/TPS659x0 Support"
 107         depends on I2C=y && GENERIC_HARDIRQS
 108         help
 109           Say yes here if you have TWL4030 family chip on your board.
 110           This core driver provides register access and IRQ handling
 111           facilities, and registers devices for the various functions
 112           so that function-specific drivers can bind to them.
 113
 114           These multi-function chips are found on many OMAP2 and OMAP3
 115           boards, providing power management, RTC, GPIO, keypad, a
 116           high speed USB OTG transceiver, an audio codec (on most
 117           versions) and many other features.
 118
 119 config TWL4030_POWER
 120         bool "Support power resources on TWL4030 family chips"
 121         depends on TWL4030_CORE && ARM
 122         help
 123           Say yes here if you want to use the power resources on the
 124           TWL4030 family chips.  Most of these resources are regulators,
 125           which have a separate driver; some are control signals, such
 126           as clock request handshaking.
 127
 128           This driver uses board-specific data to initialize the resources
 129           and load scripts controling which resources are switched off/on
 130           or reset when a sleep, wakeup or warm reset event occurs.
 131
 132 config TWL4030_CODEC
 133         bool
 134         depends on TWL4030_CORE
 135         select MFD_CORE
 136         default n
 137
 138 config MFD_TMIO
 139         bool
 140         default n
 141
 142 config MFD_T7L66XB
 143         bool "Support Toshiba T7L66XB"
 144         depends on ARM && HAVE_CLK
 145         select MFD_CORE
 146         select MFD_TMIO
 147         help
 148           Support for Toshiba Mobile IO Controller T7L66XB
 149
 150 config MFD_TC6387XB
 151         bool "Support Toshiba TC6387XB"
 152         depends on ARM && HAVE_CLK
 153         select MFD_CORE
 154         select MFD_TMIO
 155         help
 156           Support for Toshiba Mobile IO Controller TC6387XB
 157
 158 config MFD_TC6393XB
 159         bool "Support Toshiba TC6393XB"
 160         depends on GPIOLIB && ARM
 161         select MFD_CORE
 162         select MFD_TMIO
 163         help
 164           Support for Toshiba Mobile IO Controller TC6393XB
 165
 166 config PMIC_DA903X
 167         bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 168         depends on I2C=y
 169         help
 170           Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
 171           ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 172           usually found on PXA processors-based platforms. This includes
 173           the I2C driver and the core APIs _only_, you have to select
 174           individual components like LCD backlight, voltage regulators,
 175           LEDs and battery-charger under the corresponding menus.
 176
 177 config PMIC_ADP5520
 178         bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
 179         depends on I2C=y
 180         help
 181           Say yes here to add support for Analog Devices AD5520 and ADP5501,
 182           Multifunction Power Management IC. This includes
 183           the I2C driver and the core APIs _only_, you have to select
 184           individual components like LCD backlight, LEDs, GPIOs and Kepad
 185           under the corresponding menus.
 186
 187 config MFD_WM8400
 188         tristate "Support Wolfson Microelectronics WM8400"
 189         select MFD_CORE
 190         depends on I2C
 191         help
 192           Support for the Wolfson Microelecronics WM8400 PMIC and audio
 193           CODEC.  This driver provides common support for accessing
 194           the device, additional drivers must be enabled in order to use
 195           the functionality of the device.
 196
 197 config MFD_WM831X
 198         bool "Support Wolfson Microelectronics WM831x/2x PMICs"
 199         select MFD_CORE
 200         depends on I2C=y
 201         help
 202           Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
 203           This driver provides common support for accessing the device,
 204           additional drivers must be enabled in order to use the
 205           functionality of the device.
 206
 207 config MFD_WM8350
 208         tristate
 209
 210 config MFD_WM8350_CONFIG_MODE_0
 211         bool
 212         depends on MFD_WM8350
 213
 214 config MFD_WM8350_CONFIG_MODE_1
 215         bool
 216         depends on MFD_WM8350
 217
 218 config MFD_WM8350_CONFIG_MODE_2
 219         bool
 220         depends on MFD_WM8350
 221
 222 config MFD_WM8350_CONFIG_MODE_3
 223         bool
 224         depends on MFD_WM8350
 225
 226 config MFD_WM8351_CONFIG_MODE_0
 227         bool
 228         depends on MFD_WM8350
 229
 230 config MFD_WM8351_CONFIG_MODE_1
 231         bool
 232         depends on MFD_WM8350
 233
 234 config MFD_WM8351_CONFIG_MODE_2
 235         bool
 236         depends on MFD_WM8350
 237
 238 config MFD_WM8351_CONFIG_MODE_3
 239         bool
 240         depends on MFD_WM8350
 241
 242 config MFD_WM8352_CONFIG_MODE_0
 243         bool
 244         depends on MFD_WM8350
 245
 246 config MFD_WM8352_CONFIG_MODE_1
 247         bool
 248         depends on MFD_WM8350
 249
 250 config MFD_WM8352_CONFIG_MODE_2
 251         bool
 252         depends on MFD_WM8350
 253
 254 config MFD_WM8352_CONFIG_MODE_3
 255         bool
 256         depends on MFD_WM8350
 257
 258 config MFD_WM8350_I2C
 259         tristate "Support Wolfson Microelectronics WM8350 with I2C"
 260         select MFD_WM8350
 261         depends on I2C
 262         help
 263           The WM8350 is an integrated audio and power management
 264           subsystem with watchdog and RTC functionality for embedded
 265           systems.  This option enables core support for the WM8350 with
 266           I2C as the control interface.  Additional options must be
 267           selected to enable support for the functionality of the chip.
 268
 269 config MFD_PCF50633
 270         tristate "Support for NXP PCF50633"
 271         depends on I2C
 272         help
 273           Say yes here if you have NXP PCF50633 chip on your board.
 274           This core driver provides register access and IRQ handling
 275           facilities, and registers devices for the various functions
 276           so that function-specific drivers can bind to them.
 277
 278 config MFD_MC13783
 279         tristate "Support Freescale MC13783"
 280         depends on SPI_MASTER
 281         select MFD_CORE
 282         help
 283           Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
 284           This driver provides common support for accessing  the device,
 285           additional drivers must be enabled in order to use the
 286           functionality of the device.
 287
 288 config PCF50633_ADC
 289         tristate "Support for NXP PCF50633 ADC"
 290         depends on MFD_PCF50633
 291         help
 292          Say yes here if you want to include support for ADC in the
 293          NXP PCF50633 chip.
 294
 295 config PCF50633_GPIO
 296         tristate "Support for NXP PCF50633 GPIO"
 297         depends on MFD_PCF50633
 298         help
 299          Say yes here if you want to include support GPIO for pins on
 300          the PCF50633 chip.
 301
 302 config AB3100_CORE
 303         tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
 304         depends on I2C
 305         default y if ARCH_U300
 306         help
 307           Select this to enable the AB3100 Mixed Signal IC core
 308           functionality. This connects to a AB3100 on the I2C bus
 309           and expose a number of symbols needed for dependent devices
 310           to read and write registers and subscribe to events from
 311           this multi-functional IC. This is needed to use other features
 312           of the AB3100 such as battery-backed RTC, charging control,
 313           LEDs, vibrator, system power and temperature, power management
 314           and ALSA sound.
 315
 316 config AB3100_OTP
 317         tristate "ST-Ericsson AB3100 OTP functions"
 318         depends on AB3100_CORE
 319         default y if AB3100_CORE
 320         help
 321           Select this to enable the AB3100 Mixed Signal IC OTP (one-time
 322           programmable memory) support. This exposes a sysfs file to read
 323           out OTP values.
 324
 325 config EZX_PCAP
 326         bool "PCAP Support"
 327         depends on GENERIC_HARDIRQS && SPI_MASTER
 328         help
 329           This enables the PCAP ASIC present on EZX Phones. This is
 330           needed for MMC, TouchScreen, Sound, USB, etc..
 331
 332 config MFD_88PM8607
 333         bool "Support Marvell 88PM8607"
 334         depends on I2C=y
 335         select MFD_CORE
 336         help
 337           This supports for Marvell 88PM8607 Power Management IC. This includes
 338           the I2C driver and the core APIs _only_, you have to select
 339           individual components like voltage regulators, RTC and
 340           battery-charger under the corresponding menus.
 341
 342 config AB4500_CORE
 343         tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
 344         depends on SPI
 345         help
 346           Select this option to enable access to AB4500 power management
 347           chip. This connects to U8500 on the SSP/SPI bus and exports
 348           read/write functions for the devices to get access to this chip.
 349           This chip embeds various other multimedia funtionalities as well.
 350
 351 endmenu
 352
 353 menu "Multimedia Capabilities Port drivers"
 354         depends on ARCH_SA1100
 355
 356 config MCP
 357         tristate
 358
 359 # Interface drivers
 360 config MCP_SA11X0
 361         tristate "Support SA11x0 MCP interface"
 362         depends on ARCH_SA1100
 363         select MCP
 364
 365 # Chip drivers
 366 config MCP_UCB1200
 367         tristate "Support for UCB1200 / UCB1300"
 368         depends on MCP
 369
 370 config MCP_UCB1200_TS
 371         tristate "Touchscreen interface support"
 372         depends on MCP_UCB1200 && INPUT
 373
 374 endmenu