drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 if HAS_IOMEM
   6 menu "Multifunction device drivers"
   7
   8 config MFD_CORE
   9         tristate
  10         select IRQ_DOMAIN
  11         default n
  12
  13 config MFD_CS5535
  14         tristate "AMD CS5535 and CS5536 southbridge core functions"
  15         select MFD_CORE
  16         depends on PCI && (X86_32 || (X86 && COMPILE_TEST))
  17         ---help---
  18           This is the core driver for CS5535/CS5536 MFD functions.  This is
  19           necessary for using the board's GPIO and MFGPT functionality.
  20
  21 config MFD_AS3711
  22         bool "AMS AS3711"
  23         select MFD_CORE
  24         select REGMAP_I2C
  25         select REGMAP_IRQ
  26         depends on I2C=y
  27         help
  28           Support for the AS3711 PMIC from AMS
  29
  30 config MFD_AS3722
  31         bool "ams AS3722 Power Management IC"
  32         select MFD_CORE
  33         select REGMAP_I2C
  34         select REGMAP_IRQ
  35         depends on I2C=y && OF
  36         help
  37           The ams AS3722 is a compact system PMU suitable for mobile phones,
  38           tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
  39           controllers, 11 LDOs, RTC, automatic battery, temperature and
  40           over current monitoring, GPIOs, ADC and a watchdog.
  41
  42 config PMIC_ADP5520
  43         bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
  44         depends on I2C=y
  45         help
  46           Say yes here to add support for Analog Devices AD5520 and ADP5501,
  47           Multifunction Power Management IC. This includes
  48           the I2C driver and the core APIs _only_, you have to select
  49           individual components like LCD backlight, LEDs, GPIOs and Kepad
  50           under the corresponding menus.
  51
  52 config MFD_AAT2870_CORE
  53         bool "AnalogicTech AAT2870"
  54         select MFD_CORE
  55         depends on I2C=y
  56         depends on GPIOLIB || COMPILE_TEST
  57         help
  58           If you say yes here you get support for the AAT2870.
  59           This driver provides common support for accessing the device,
  60           additional drivers must be enabled in order to use the
  61           functionality of the device.
  62
  63 config MFD_ATMEL_HLCDC
  64         tristate "Atmel HLCDC (High-end LCD Controller)"
  65         select MFD_CORE
  66         select REGMAP_MMIO
  67         depends on OF
  68         help
  69           If you say yes here you get support for the HLCDC block.
  70           This driver provides common support for accessing the device,
  71           additional drivers must be enabled in order to use the
  72           functionality of the device.
  73
  74 config MFD_BCM590XX
  75         tristate "Broadcom BCM590xx PMUs"
  76         select MFD_CORE
  77         select REGMAP_I2C
  78         depends on I2C
  79         help
  80           Support for the BCM590xx PMUs from Broadcom
  81
  82 config MFD_AXP20X
  83         bool "X-Powers AXP20X"
  84         select MFD_CORE
  85         select REGMAP_I2C
  86         select REGMAP_IRQ
  87         depends on I2C=y
  88         help
  89           If you say Y here you get support for the X-Powers AXP202, AXP209 and
  90           AXP288 power management IC (PMIC).
  91           This driver include only the core APIs. You have to select individual
  92           components like regulators or the PEK (Power Enable Key) under the
  93           corresponding menus.
  94
  95 config MFD_CROS_EC
  96         tristate "ChromeOS Embedded Controller"
  97         select MFD_CORE
  98         select CHROME_PLATFORMS
  99         select CROS_EC_PROTO
 100         help
 101           If you say Y here you get support for the ChromeOS Embedded
 102           Controller (EC) providing keyboard, battery and power services.
 103           You also need to enable the driver for the bus you are using. The
 104           protocol for talking to the EC is defined by the bus driver.
 105
 106 config MFD_CROS_EC_I2C
 107         tristate "ChromeOS Embedded Controller (I2C)"
 108         depends on MFD_CROS_EC && CROS_EC_PROTO && I2C
 109
 110         help
 111           If you say Y here, you get support for talking to the ChromeOS
 112           EC through an I2C bus. This uses a simple byte-level protocol with
 113           a checksum. Failing accesses will be retried three times to
 114           improve reliability.
 115
 116 config MFD_CROS_EC_SPI
 117         tristate "ChromeOS Embedded Controller (SPI)"
 118         depends on MFD_CROS_EC && CROS_EC_PROTO && SPI && OF
 119
 120         ---help---
 121           If you say Y here, you get support for talking to the ChromeOS EC
 122           through a SPI bus, using a byte-level protocol. Since the EC's
 123           response time cannot be guaranteed, we support ignoring
 124           'pre-amble' bytes before the response actually starts.
 125
 126 config MFD_ASIC3
 127         bool "Compaq ASIC3"
 128         depends on GPIOLIB && ARM
 129         select MFD_CORE
 130          ---help---
 131           This driver supports the ASIC3 multifunction chip found on many
 132           PDAs (mainly iPAQ and HTC based ones)
 133
 134 config PMIC_DA903X
 135         bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 136         depends on I2C=y
 137         help
 138           Say yes here to add support for Dialog Semiconductor DA9030 (a.k.a
 139           ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 140           usually found on PXA processors-based platforms. This includes
 141           the I2C driver and the core APIs _only_, you have to select
 142           individual components like LCD backlight, voltage regulators,
 143           LEDs and battery-charger under the corresponding menus.
 144
 145 config PMIC_DA9052
 146         bool
 147         select MFD_CORE
 148
 149 config MFD_DA9052_SPI
 150         bool "Dialog Semiconductor DA9052/53 PMIC variants with SPI"
 151         select REGMAP_SPI
 152         select REGMAP_IRQ
 153         select PMIC_DA9052
 154         depends on SPI_MASTER=y
 155         help
 156           Support for the Dialog Semiconductor DA9052 PMIC
 157           when controlled using SPI. This driver provides common support
 158           for accessing the device, additional drivers must be enabled in
 159           order to use the functionality of the device.
 160
 161 config MFD_DA9052_I2C
 162         bool "Dialog Semiconductor DA9052/53 PMIC variants with I2C"
 163         select REGMAP_I2C
 164         select REGMAP_IRQ
 165         select PMIC_DA9052
 166         depends on I2C=y
 167         help
 168           Support for the Dialog Semiconductor DA9052 PMIC
 169           when controlled using I2C. This driver provides common support
 170           for accessing the device, additional drivers must be enabled in
 171           order to use the functionality of the device.
 172
 173 config MFD_DA9055
 174         bool "Dialog Semiconductor DA9055 PMIC Support"
 175         select REGMAP_I2C
 176         select REGMAP_IRQ
 177         select MFD_CORE
 178         depends on I2C=y
 179         help
 180           Say yes here for support of Dialog Semiconductor DA9055. This is
 181           a Power Management IC. This driver provides common support for
 182           accessing the device as well as the I2C interface to the chip itself.
 183           Additional drivers must be enabled in order to use the functionality
 184           of the device.
 185
 186           This driver can be built as a module. If built as a module it will be
 187           called "da9055"
 188
 189 config MFD_DA9063
 190         bool "Dialog Semiconductor DA9063 PMIC Support"
 191         select MFD_CORE
 192         select REGMAP_I2C
 193         select REGMAP_IRQ
 194         depends on I2C=y
 195         help
 196           Say yes here for support for the Dialog Semiconductor DA9063 PMIC.
 197           This includes the I2C driver and core APIs.
 198           Additional drivers must be enabled in order to use the functionality
 199           of the device.
 200
 201 config MFD_DA9150
 202         tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip"
 203         depends on I2C=y
 204         select MFD_CORE
 205         select REGMAP_I2C
 206         select REGMAP_IRQ
 207         help
 208           This adds support for the DA9150 integrated charger and fuel-gauge
 209           chip. This driver provides common support for accessing the device.
 210           Additional drivers must be enabled in order to use the specific
 211           features of the device.
 212
 213 config MFD_DLN2
 214         tristate "Diolan DLN2 support"
 215         select MFD_CORE
 216         depends on USB
 217         help
 218           This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter
 219           DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2,
 220           etc. must be enabled in order to use the functionality of
 221           the device.
 222
 223 config MFD_MC13XXX
 224         tristate
 225         depends on (SPI_MASTER || I2C)
 226         select MFD_CORE
 227         select REGMAP_IRQ
 228         help
 229           Enable support for the Freescale MC13783 and MC13892 PMICs.
 230           This driver provides common support for accessing the device,
 231           additional drivers must be enabled in order to use the
 232           functionality of the device.
 233
 234 config MFD_MC13XXX_SPI
 235         tristate "Freescale MC13783 and MC13892 SPI interface"
 236         depends on SPI_MASTER
 237         select REGMAP_SPI
 238         select MFD_MC13XXX
 239         help
 240           Select this if your MC13xxx is connected via an SPI bus.
 241
 242 config MFD_MC13XXX_I2C
 243         tristate "Freescale MC13892 I2C interface"
 244         depends on I2C
 245         select REGMAP_I2C
 246         select MFD_MC13XXX
 247         help
 248           Select this if your MC13xxx is connected via an I2C bus.
 249
 250 config MFD_HI6421_PMIC
 251         tristate "HiSilicon Hi6421 PMU/Codec IC"
 252         depends on OF
 253         select MFD_CORE
 254         select REGMAP_MMIO
 255         help
 256           Add support for HiSilicon Hi6421 PMIC. Hi6421 includes multi-
 257           functions, such as regulators, RTC, codec, Coulomb counter, etc.
 258           This driver includes core APIs _only_. You have to select
 259           individul components like voltage regulators under corresponding
 260           menus in order to enable them.
 261           We communicate with the Hi6421 via memory-mapped I/O.
 262
 263 config HTC_EGPIO
 264         bool "HTC EGPIO support"
 265         depends on GPIOLIB && ARM
 266         help
 267             This driver supports the CPLD egpio chip present on
 268             several HTC phones.  It provides basic support for input
 269             pins, output pins, and irqs.
 270
 271 config HTC_PASIC3
 272         tristate "HTC PASIC3 LED/DS1WM chip support"
 273         select MFD_CORE
 274         help
 275           This core driver provides register access for the LED/DS1WM
 276           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
 277           HTC Magician devices, respectively. Actual functionality is
 278           handled by the leds-pasic3 and ds1wm drivers.
 279
 280 config HTC_I2CPLD
 281         bool "HTC I2C PLD chip support"
 282         depends on I2C=y && GPIOLIB
 283         help
 284           If you say yes here you get support for the supposed CPLD
 285           found on omap850 HTC devices like the HTC Wizard and HTC Herald.
 286           This device provides input and output GPIOs through an I2C
 287           interface to one or more sub-chips.
 288
 289 config MFD_INTEL_QUARK_I2C_GPIO
 290         tristate "Intel Quark MFD I2C GPIO"
 291         depends on PCI
 292         depends on X86
 293         depends on COMMON_CLK
 294         select MFD_CORE
 295         help
 296           This MFD provides support for I2C and GPIO that exist only
 297           in a single PCI device. It splits the 2 IO devices to
 298           their respective IO driver.
 299           The GPIO exports a total amount of 8 interrupt-capable GPIOs.
 300
 301 config LPC_ICH
 302         tristate "Intel ICH LPC"
 303         depends on PCI
 304         select MFD_CORE
 305         help
 306           The LPC bridge function of the Intel ICH provides support for
 307           many functional units. This driver provides needed support for
 308           other drivers to control these functions, currently GPIO and
 309           watchdog.
 310
 311 config LPC_SCH
 312         tristate "Intel SCH LPC"
 313         depends on PCI
 314         select MFD_CORE
 315         help
 316           LPC bridge function of the Intel SCH provides support for
 317           System Management Bus and General Purpose I/O.
 318
 319 config INTEL_SOC_PMIC
 320         bool "Support for Intel Atom SoC PMIC"
 321         depends on I2C=y
 322         select MFD_CORE
 323         select REGMAP_I2C
 324         select REGMAP_IRQ
 325         help
 326           Select this option to enable support for the PMIC device
 327           on some Intel SoC systems. The PMIC provides ADC, GPIO,
 328           thermal, charger and related power management functions
 329           on these systems.
 330
 331 config MFD_INTEL_LPSS
 332         tristate
 333         select COMMON_CLK
 334         select MFD_CORE
 335
 336 config MFD_INTEL_LPSS_ACPI
 337         tristate "Intel Low Power Subsystem support in ACPI mode"
 338         select MFD_INTEL_LPSS
 339         depends on X86 && ACPI
 340         help
 341           This driver supports Intel Low Power Subsystem (LPSS) devices such as
 342           I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake
 343           PCH) in ACPI mode.
 344
 345 config MFD_INTEL_LPSS_PCI
 346         tristate "Intel Low Power Subsystem support in PCI mode"
 347         select MFD_INTEL_LPSS
 348         depends on X86 && PCI
 349         help
 350           This driver supports Intel Low Power Subsystem (LPSS) devices such as
 351           I2C, SPI and HS-UART starting from Intel Sunrisepoint (Intel Skylake
 352           PCH) in PCI mode.
 353
 354 config MFD_INTEL_MSIC
 355         bool "Intel MSIC"
 356         depends on INTEL_SCU_IPC
 357         select MFD_CORE
 358         help
 359           Select this option to enable access to Intel MSIC (Avatele
 360           Passage) chip. This chip embeds audio, battery, GPIO, etc.
 361           devices used in Intel Medfield platforms.
 362
 363 config MFD_IPAQ_MICRO
 364         bool "Atmel Micro ASIC (iPAQ h3100/h3600/h3700) Support"
 365         depends on SA1100_H3100 || SA1100_H3600
 366         select MFD_CORE
 367         help
 368           Select this to get support for the Microcontroller found in
 369           the Compaq iPAQ handheld computers. This is an Atmel
 370           AT90LS8535 microcontroller flashed with a special iPAQ
 371           firmware using the custom protocol implemented in this driver.
 372
 373 config MFD_JANZ_CMODIO
 374         tristate "Janz CMOD-IO PCI MODULbus Carrier Board"
 375         select MFD_CORE
 376         depends on PCI
 377         help
 378           This is the core driver for the Janz CMOD-IO PCI MODULbus
 379           carrier board. This device is a PCI to MODULbus bridge which may
 380           host many different types of MODULbus daughterboards, including
 381           CAN and GPIO controllers.
 382
 383 config MFD_JZ4740_ADC
 384         bool "Janz JZ4740 ADC core"
 385         select MFD_CORE
 386         select GENERIC_IRQ_CHIP
 387         depends on MACH_JZ4740
 388         help
 389           Say yes here if you want support for the ADC unit in the JZ4740 SoC.
 390           This driver is necessary for jz4740-battery and jz4740-hwmon driver.
 391
 392 config MFD_KEMPLD
 393         tristate "Kontron module PLD device"
 394         select MFD_CORE
 395         help
 396           This is the core driver for the PLD (Programmable Logic Device) found
 397           on some Kontron ETX and COMexpress (ETXexpress) modules. The PLD
 398           device may provide functions like watchdog, GPIO, UART and I2C bus.
 399
 400           The following modules are supported:
 401                 * COMe-bHL6
 402                 * COMe-bIP#
 403                 * COMe-bPC2 (ETXexpress-PC)
 404                 * COMe-bSC# (ETXexpress-SC T#)
 405                 * COMe-cBL6
 406                 * COMe-cBT6
 407                 * COMe-cCT6
 408                 * COMe-cDC2 (microETXexpress-DC)
 409                 * COMe-cHL6
 410                 * COMe-cPC2 (microETXexpress-PC)
 411                 * COMe-mBT10
 412                 * COMe-mCT10
 413                 * COMe-mTT10 (nanoETXexpress-TT)
 414                 * ETX-OH
 415
 416           This driver can also be built as a module. If so, the module
 417           will be called kempld-core.
 418
 419 config MFD_88PM800
 420         tristate "Marvell 88PM800"
 421         depends on I2C=y
 422         select REGMAP_I2C
 423         select REGMAP_IRQ
 424         select MFD_CORE
 425         help
 426           This supports for Marvell 88PM800 Power Management IC.
 427           This includes the I2C driver and the core APIs _only_, you have to
 428           select individual components like voltage regulators, RTC and
 429           battery-charger under the corresponding menus.
 430
 431 config MFD_88PM805
 432         tristate "Marvell 88PM805"
 433         depends on I2C=y
 434         select REGMAP_I2C
 435         select REGMAP_IRQ
 436         select MFD_CORE
 437         help
 438           This supports for Marvell 88PM805 Power Management IC. This includes
 439           the I2C driver and the core APIs _only_, you have to select individual
 440           components like codec device, headset/Mic device under the
 441           corresponding menus.
 442
 443 config MFD_88PM860X
 444         bool "Marvell 88PM8606/88PM8607"
 445         depends on I2C=y
 446         select REGMAP_I2C
 447         select MFD_CORE
 448         help
 449           This supports for Marvell 88PM8606/88PM8607 Power Management IC.
 450           This includes the I2C driver and the core APIs _only_, you have to
 451           select individual components like voltage regulators, RTC and
 452           battery-charger under the corresponding menus.
 453
 454 config MFD_MAX14577
 455         bool "Maxim Semiconductor MAX14577/77836 MUIC + Charger Support"
 456         depends on I2C=y
 457         select MFD_CORE
 458         select REGMAP_I2C
 459         select REGMAP_IRQ
 460         select IRQ_DOMAIN
 461         help
 462           Say yes here to add support for Maxim Semiconductor MAX14577 and
 463           MAX77836 Micro-USB ICs with battery charger.
 464           This driver provides common support for accessing the device;
 465           additional drivers must be enabled in order to use the functionality
 466           of the device.
 467
 468 config MFD_MAX77686
 469         bool "Maxim Semiconductor MAX77686/802 PMIC Support"
 470         depends on I2C=y
 471         depends on OF
 472         select MFD_CORE
 473         select REGMAP_I2C
 474         select REGMAP_IRQ
 475         select IRQ_DOMAIN
 476         help
 477           Say yes here to add support for Maxim Semiconductor MAX77686 and
 478           MAX77802 which are Power Management IC with an RTC on chip.
 479           This driver provides common support for accessing the device;
 480           additional drivers must be enabled in order to use the functionality
 481           of the device.
 482
 483 config MFD_MAX77693
 484         bool "Maxim Semiconductor MAX77693 PMIC Support"
 485         depends on I2C=y
 486         select MFD_CORE
 487         select REGMAP_I2C
 488         select REGMAP_IRQ
 489         help
 490           Say yes here to add support for Maxim Semiconductor MAX77693.
 491           This is a companion Power Management IC with Flash, Haptic, Charger,
 492           and MUIC(Micro USB Interface Controller) controls on chip.
 493           This driver provides common support for accessing the device;
 494           additional drivers must be enabled in order to use the functionality
 495           of the device.
 496
 497 config MFD_MAX77843
 498         bool "Maxim Semiconductor MAX77843 PMIC Support"
 499         depends on I2C=y
 500         select MFD_CORE
 501         select REGMAP_I2C
 502         select REGMAP_IRQ
 503         help
 504           Say yes here to add support for Maxim Semiconductor MAX77843.
 505           This is companion Power Management IC with LEDs, Haptic, Charger,
 506           Fuel Gauge, MUIC(Micro USB Interface Controller) controls on chip.
 507           This driver provides common support for accessing the device;
 508           additional drivers must be enabled in order to use the functionality
 509           of the device.
 510
 511 config MFD_MAX8907
 512         tristate "Maxim Semiconductor MAX8907 PMIC Support"
 513         select MFD_CORE
 514         depends on I2C=y
 515         select REGMAP_I2C
 516         select REGMAP_IRQ
 517         help
 518           Say yes here to add support for Maxim Semiconductor MAX8907. This is
 519           a Power Management IC. This driver provides common support for
 520           accessing the device; additional drivers must be enabled in order
 521           to use the functionality of the device.
 522
 523 config MFD_MAX8925
 524         bool "Maxim Semiconductor MAX8925 PMIC Support"
 525         depends on I2C=y
 526         select MFD_CORE
 527         help
 528           Say yes here to add support for Maxim Semiconductor MAX8925. This is
 529           a Power Management IC. This driver provides common support for
 530           accessing the device, additional drivers must be enabled in order
 531           to use the functionality of the device.
 532
 533 config MFD_MAX8997
 534         bool "Maxim Semiconductor MAX8997/8966 PMIC Support"
 535         depends on I2C=y
 536         select MFD_CORE
 537         select IRQ_DOMAIN
 538         help
 539           Say yes here to add support for Maxim Semiconductor MAX8997/8966.
 540           This is a Power Management IC with RTC, Flash, Fuel Gauge, Haptic,
 541           MUIC controls on chip.
 542           This driver provides common support for accessing the device;
 543           additional drivers must be enabled in order to use the functionality
 544           of the device.
 545
 546 config MFD_MAX8998
 547         bool "Maxim Semiconductor MAX8998/National LP3974 PMIC Support"
 548         depends on I2C=y
 549         select MFD_CORE
 550         select IRQ_DOMAIN
 551         help
 552           Say yes here to add support for Maxim Semiconductor MAX8998 and
 553           National Semiconductor LP3974. This is a Power Management IC.
 554           This driver provides common support for accessing the device,
 555           additional drivers must be enabled in order to use the functionality
 556           of the device.
 557
 558 config MFD_MT6397
 559         tristate "MediaTek MT6397 PMIC Support"
 560         select MFD_CORE
 561         select IRQ_DOMAIN
 562         help
 563           Say yes here to add support for MediaTek MT6397 PMIC. This is
 564           a Power Management IC. This driver provides common support for
 565           accessing the device; additional drivers must be enabled in order
 566           to use the functionality of the device.
 567
 568 config MFD_MENF21BMC
 569         tristate "MEN 14F021P00 Board Management Controller Support"
 570         depends on I2C
 571         select MFD_CORE
 572         help
 573           Say yes here to add support for the MEN 14F021P00 BMC
 574           which is a Board Management Controller connected to the I2C bus.
 575           The device supports multiple sub-devices like LED, HWMON and WDT.
 576           This driver provides common support for accessing the devices;
 577           additional drivers must be enabled in order to use the
 578           functionality of the BMC device.
 579
 580           This driver can also be built as a module. If so the module
 581           will be called menf21bmc.
 582
 583 config EZX_PCAP
 584         bool "Motorola EZXPCAP Support"
 585         depends on SPI_MASTER
 586         help
 587           This enables the PCAP ASIC present on EZX Phones. This is
 588           needed for MMC, TouchScreen, Sound, USB, etc..
 589
 590 config MFD_VIPERBOARD
 591         tristate "Nano River Technologies Viperboard"
 592         select MFD_CORE
 593         depends on USB
 594         default n
 595         help
 596           Say yes here if you want support for Nano River Technologies
 597           Viperboard.
 598           There are mfd cell drivers available for i2c master, adc and
 599           both gpios found on the board. The spi part does not yet
 600           have a driver.
 601           You need to select the mfd cell drivers separately.
 602           The drivers do not support all features the board exposes.
 603
 604 config MFD_RETU
 605         tristate "Nokia Retu and Tahvo multi-function device"
 606         select MFD_CORE
 607         depends on I2C
 608         select REGMAP_IRQ
 609         help
 610           Retu and Tahvo are a multi-function devices found on Nokia
 611           Internet Tablets (770, N800 and N810).
 612
 613 config MFD_PCF50633
 614         tristate "NXP PCF50633"
 615         depends on I2C
 616         select REGMAP_I2C
 617         help
 618           Say yes here if you have NXP PCF50633 chip on your board.
 619           This core driver provides register access and IRQ handling
 620           facilities, and registers devices for the various functions
 621           so that function-specific drivers can bind to them.
 622
 623 config PCF50633_ADC
 624         tristate "NXP PCF50633 ADC"
 625         depends on MFD_PCF50633
 626         help
 627          Say yes here if you want to include support for ADC in the
 628          NXP PCF50633 chip.
 629
 630 config PCF50633_GPIO
 631         tristate "NXP PCF50633 GPIO"
 632         depends on MFD_PCF50633
 633         help
 634          Say yes here if you want to include support GPIO for pins on
 635          the PCF50633 chip.
 636
 637 config UCB1400_CORE
 638         tristate "Philips UCB1400 Core driver"
 639         depends on AC97_BUS
 640         depends on GPIOLIB
 641         help
 642           This enables support for the Philips UCB1400 core functions.
 643           The UCB1400 is an AC97 audio codec.
 644
 645           To compile this driver as a module, choose M here: the
 646           module will be called ucb1400_core.
 647
 648 config MFD_PM8XXX
 649         tristate
 650
 651 config MFD_PM8921_CORE
 652         tristate "Qualcomm PM8921 PMIC chip"
 653         depends on (ARM || HEXAGON)
 654         select IRQ_DOMAIN
 655         select MFD_CORE
 656         select MFD_PM8XXX
 657         select REGMAP
 658         help
 659           If you say yes to this option, support will be included for the
 660           built-in PM8921 PMIC chip.
 661
 662           This is required if your board has a PM8921 and uses its features,
 663           such as: MPPs, GPIOs, regulators, interrupts, and PWM.
 664
 665           Say M here if you want to include support for PM8921 chip as a module.
 666           This will build a module called "pm8921-core".
 667
 668 config MFD_QCOM_RPM
 669         tristate "Qualcomm Resource Power Manager (RPM)"
 670         depends on ARCH_QCOM && OF
 671         help
 672           If you say yes to this option, support will be included for the
 673           Resource Power Manager system found in the Qualcomm 8660, 8960 and
 674           8064 based devices.
 675
 676           This is required to access many regulators, clocks and bus
 677           frequencies controlled by the RPM on these devices.
 678
 679           Say M here if you want to include support for the Qualcomm RPM as a
 680           module. This will build a module called "qcom_rpm".
 681
 682 config MFD_SPMI_PMIC
 683         tristate "Qualcomm SPMI PMICs"
 684         depends on ARCH_QCOM || COMPILE_TEST
 685         depends on OF
 686         depends on SPMI
 687         select REGMAP_SPMI
 688         help
 689           This enables support for the Qualcomm SPMI PMICs.
 690           These PMICs are currently used with the Snapdragon 800 series of
 691           SoCs.  Note, that this will only be useful paired with descriptions
 692           of the independent functions as children nodes in the device tree.
 693
 694           Say M here if you want to include support for the SPMI PMIC
 695           series as a module.  The module will be called "qcom-spmi-pmic".
 696
 697 config MFD_RDC321X
 698         tristate "RDC R-321x southbridge"
 699         select MFD_CORE
 700         depends on PCI
 701         help
 702           Say yes here if you want to have support for the RDC R-321x SoC
 703           southbridge which provides access to GPIOs and Watchdog using the
 704           southbridge PCI device configuration space.
 705
 706 config MFD_RTSX_PCI
 707         tristate "Realtek PCI-E card reader"
 708         depends on PCI
 709         select MFD_CORE
 710         help
 711           This supports for Realtek PCI-Express card reader including rts5209,
 712           rts5229, rtl8411, etc. Realtek card reader supports access to many
 713           types of memory cards, such as Memory Stick, Memory Stick Pro,
 714           Secure Digital and MultiMediaCard.
 715
 716 config MFD_RT5033
 717         tristate "Richtek RT5033 Power Management IC"
 718         depends on I2C=y
 719         select MFD_CORE
 720         select REGMAP_I2C
 721         select REGMAP_IRQ
 722         help
 723           This driver provides for the Richtek RT5033 Power Management IC,
 724           which includes the I2C driver and the Core APIs. This driver provides
 725           common support for accessing the device. The device supports multiple
 726           sub-devices like charger, fuel gauge, flash LED, current source,
 727           LDO and Buck.
 728
 729 config MFD_RTSX_USB
 730         tristate "Realtek USB card reader"
 731         depends on USB
 732         select MFD_CORE
 733         help
 734           Select this option to get support for Realtek USB 2.0 card readers
 735           including RTS5129, RTS5139, RTS5179 and RTS5170.
 736           Realtek card reader supports access to many types of memory cards,
 737           such as Memory Stick Pro, Secure Digital and MultiMediaCard.
 738
 739 config MFD_RC5T583
 740         bool "Ricoh RC5T583 Power Management system device"
 741         depends on I2C=y
 742         select MFD_CORE
 743         select REGMAP_I2C
 744         help
 745           Select this option to get support for the RICOH583 Power
 746           Management system device.
 747           This driver provides common support for accessing the device
 748           through i2c interface. The device supports multiple sub-devices
 749           like GPIO, interrupts, RTC, LDO and DCDC regulators, onkey.
 750           Additional drivers must be enabled in order to use the
 751           different functionality of the device.
 752
 753 config MFD_RK808
 754         tristate "Rockchip RK808 Power Management chip"
 755         depends on I2C && OF
 756         select MFD_CORE
 757         select REGMAP_I2C
 758         select REGMAP_IRQ
 759         help
 760           If you say yes here you get support for the RK808
 761           Power Management chips.
 762           This driver provides common support for accessing the device
 763           through I2C interface. The device supports multiple sub-devices
 764           including interrupts, RTC, LDO & DCDC regulators, and onkey.
 765
 766 config MFD_RN5T618
 767         tristate "Ricoh RN5T5618 PMIC"
 768         depends on I2C
 769         select MFD_CORE
 770         select REGMAP_I2C
 771         help
 772           Say yes here to add support for the Ricoh RN5T618 PMIC. This
 773           driver provides common support for accessing the device,
 774           additional drivers must be enabled in order to use the
 775           functionality of the device.
 776
 777 config MFD_SEC_CORE
 778         bool "SAMSUNG Electronics PMIC Series Support"
 779         depends on I2C=y
 780         select MFD_CORE
 781         select REGMAP_I2C
 782         select REGMAP_IRQ
 783         help
 784          Support for the Samsung Electronics MFD series.
 785          This driver provides common support for accessing the device,
 786          additional drivers must be enabled in order to use the functionality
 787          of the device
 788
 789 config MFD_SI476X_CORE
 790         tristate "Silicon Laboratories 4761/64/68 AM/FM radio."
 791         depends on I2C
 792         select MFD_CORE
 793         select REGMAP_I2C
 794         help
 795           This is the core driver for the SI476x series of AM/FM
 796           radio. This MFD driver connects the radio-si476x V4L2 module
 797           and the si476x audio codec.
 798
 799           To compile this driver as a module, choose M here: the
 800           module will be called si476x-core.
 801
 802 config MFD_SM501
 803         tristate "Silicon Motion SM501"
 804          ---help---
 805           This is the core driver for the Silicon Motion SM501 multimedia
 806           companion chip. This device is a multifunction device which may
 807           provide numerous interfaces including USB host controller, USB gadget,
 808           asynchronous serial ports, audio functions, and a dual display video
 809           interface. The device may be connected by PCI or local bus with
 810           varying functions enabled.
 811
 812 config MFD_SM501_GPIO
 813         bool "Export GPIO via GPIO layer"
 814         depends on MFD_SM501 && GPIOLIB
 815          ---help---
 816          This option uses the gpio library layer to export the 64 GPIO
 817          lines on the SM501. The platform data is used to supply the
 818          base number for the first GPIO line to register.
 819
 820 config MFD_SKY81452
 821         tristate "Skyworks Solutions SKY81452"
 822         select MFD_CORE
 823         select REGMAP_I2C
 824         depends on I2C
 825         help
 826           This is the core driver for the Skyworks SKY81452 backlight and
 827           voltage regulator device.
 828
 829           This driver can also be built as a module.  If so, the module
 830           will be called sky81452.
 831
 832 config MFD_SMSC
 833        bool "SMSC ECE1099 series chips"
 834        depends on I2C=y
 835        select MFD_CORE
 836        select REGMAP_I2C
 837        help
 838         If you say yes here you get support for the
 839         ece1099 chips from SMSC.
 840
 841         To compile this driver as a module, choose M here: the
 842         module will be called smsc.
 843
 844 config ABX500_CORE
 845         bool "ST-Ericsson ABX500 Mixed Signal Circuit register functions"
 846         default y if ARCH_U300 || ARCH_U8500
 847         help
 848           Say yes here if you have the ABX500 Mixed Signal IC family
 849           chips. This core driver expose register access functions.
 850           Functionality specific drivers using these functions can
 851           remain unchanged when IC changes. Binding of the functions to
 852           actual register access is done by the IC core driver.
 853
 854 config AB3100_CORE
 855         bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
 856         depends on I2C=y && ABX500_CORE
 857         select MFD_CORE
 858         default y if ARCH_U300
 859         help
 860           Select this to enable the AB3100 Mixed Signal IC core
 861           functionality. This connects to a AB3100 on the I2C bus
 862           and expose a number of symbols needed for dependent devices
 863           to read and write registers and subscribe to events from
 864           this multi-functional IC. This is needed to use other features
 865           of the AB3100 such as battery-backed RTC, charging control,
 866           LEDs, vibrator, system power and temperature, power management
 867           and ALSA sound.
 868
 869 config AB3100_OTP
 870         tristate "ST-Ericsson AB3100 OTP functions"
 871         depends on AB3100_CORE
 872         default y if AB3100_CORE
 873         help
 874           Select this to enable the AB3100 Mixed Signal IC OTP (one-time
 875           programmable memory) support. This exposes a sysfs file to read
 876           out OTP values.
 877
 878 config AB8500_CORE
 879         bool "ST-Ericsson AB8500 Mixed Signal Power Management chip"
 880         depends on ABX500_CORE && MFD_DB8500_PRCMU
 881         select POWER_SUPPLY
 882         select MFD_CORE
 883         select IRQ_DOMAIN
 884         help
 885           Select this option to enable access to AB8500 power management
 886           chip. This connects to U8500 either on the SSP/SPI bus (deprecated
 887           since hardware version v1.0) or the I2C bus via PRCMU. It also adds
 888           the irq_chip parts for handling the Mixed Signal chip events.
 889           This chip embeds various other multimedia funtionalities as well.
 890
 891 config AB8500_DEBUG
 892        bool "Enable debug info via debugfs"
 893        depends on AB8500_GPADC && DEBUG_FS
 894        default y if DEBUG_FS
 895        help
 896          Select this option if you want debug information using the debug
 897          filesystem, debugfs.
 898
 899 config AB8500_GPADC
 900         bool "ST-Ericsson AB8500 GPADC driver"
 901         depends on AB8500_CORE && REGULATOR_AB8500
 902         default y
 903         help
 904           AB8500 GPADC driver used to convert Acc and battery/ac/usb voltage
 905
 906 config MFD_DB8500_PRCMU
 907         bool "ST-Ericsson DB8500 Power Reset Control Management Unit"
 908         depends on UX500_SOC_DB8500
 909         select MFD_CORE
 910         help
 911           Select this option to enable support for the DB8500 Power Reset
 912           and Control Management Unit. This is basically an autonomous
 913           system controller running an XP70 microprocessor, which is accessed
 914           through a register map.
 915
 916 config MFD_STMPE
 917         bool "STMicroelectronics STMPE"
 918         depends on (I2C=y || SPI_MASTER=y)
 919         depends on OF
 920         select MFD_CORE
 921         help
 922           Support for the STMPE family of I/O Expanders from
 923           STMicroelectronics.
 924
 925           Currently supported devices are:
 926
 927                 STMPE811: GPIO, Touchscreen
 928                 STMPE1601: GPIO, Keypad
 929                 STMPE1801: GPIO, Keypad
 930                 STMPE2401: GPIO, Keypad
 931                 STMPE2403: GPIO, Keypad
 932
 933           This driver provides common support for accessing the device,
 934           additional drivers must be enabled in order to use the functionality
 935           of the device.  Currently available sub drivers are:
 936
 937                 GPIO: stmpe-gpio
 938                 Keypad: stmpe-keypad
 939                 Touchscreen: stmpe-ts
 940
 941 menu "STMicroelectronics STMPE Interface Drivers"
 942 depends on MFD_STMPE
 943
 944 config STMPE_I2C
 945         bool "STMicroelectronics STMPE I2C Interface"
 946         depends on I2C=y
 947         default y
 948         help
 949           This is used to enable I2C interface of STMPE
 950
 951 config STMPE_SPI
 952         bool "STMicroelectronics STMPE SPI Interface"
 953         depends on SPI_MASTER
 954         help
 955           This is used to enable SPI interface of STMPE
 956 endmenu
 957
 958 config MFD_STA2X11
 959         bool "STMicroelectronics STA2X11"
 960         depends on STA2X11
 961         select MFD_CORE
 962         select REGMAP_MMIO
 963
 964 config MFD_SUN6I_PRCM
 965         bool "Allwinner A31 PRCM controller"
 966         depends on ARCH_SUNXI
 967         select MFD_CORE
 968         help
 969           Support for the PRCM (Power/Reset/Clock Management) unit available
 970           in A31 SoC.
 971
 972 config MFD_SYSCON
 973         bool "System Controller Register R/W Based on Regmap"
 974         select REGMAP_MMIO
 975         help
 976           Select this option to enable accessing system control registers
 977           via regmap.
 978
 979 config MFD_DAVINCI_VOICECODEC
 980         tristate
 981         select MFD_CORE
 982         select REGMAP_MMIO
 983
 984 config MFD_TI_AM335X_TSCADC
 985         tristate "TI ADC / Touch Screen chip support"
 986         select MFD_CORE
 987         select REGMAP
 988         select REGMAP_MMIO
 989         help
 990           If you say yes here you get support for Texas Instruments series
 991           of Touch Screen /ADC chips.
 992           To compile this driver as a module, choose M here: the
 993           module will be called ti_am335x_tscadc.
 994
 995 config MFD_DM355EVM_MSP
 996         bool "TI DaVinci DM355 EVM microcontroller"
 997         depends on I2C=y && MACH_DAVINCI_DM355_EVM
 998         help
 999           This driver supports the MSP430 microcontroller used on these
1000           boards.  MSP430 firmware manages resets and power sequencing,
1001           inputs from buttons and the IR remote, LEDs, an RTC, and more.
1002
1003 config MFD_LP3943
1004         tristate "TI/National Semiconductor LP3943 MFD Driver"
1005         depends on I2C
1006         select MFD_CORE
1007         select REGMAP_I2C
1008         help
1009           Support for the TI/National Semiconductor LP3943.
1010           This driver consists of GPIO and PWM drivers.
1011           With these functionalities, it can be used for LED string control or
1012           general usage such like a GPIO controller and a PWM controller.
1013
1014 config MFD_LP8788
1015         bool "TI LP8788 Power Management Unit Driver"
1016         depends on I2C=y
1017         select MFD_CORE
1018         select REGMAP_I2C
1019         select IRQ_DOMAIN
1020         help
1021           TI LP8788 PMU supports regulators, battery charger, RTC,
1022           ADC, backlight driver and current sinks.
1023
1024 config MFD_OMAP_USB_HOST
1025         bool "TI OMAP USBHS core and TLL driver"
1026         depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
1027         default y
1028         help
1029           This is the core driver for the OAMP EHCI and OHCI drivers.
1030           This MFD driver does the required setup functionalities for
1031           OMAP USB Host drivers.
1032
1033 config MFD_PALMAS
1034         bool "TI Palmas series chips"
1035         select MFD_CORE
1036         select REGMAP_I2C
1037         select REGMAP_IRQ
1038         depends on I2C=y
1039         help
1040           If you say yes here you get support for the Palmas
1041           series of PMIC chips from Texas Instruments.
1042
1043 config TPS6105X
1044         tristate "TI TPS61050/61052 Boost Converters"
1045         depends on I2C
1046         select REGULATOR
1047         select MFD_CORE
1048         select REGULATOR_FIXED_VOLTAGE
1049         help
1050           This option enables a driver for the TP61050/TPS61052
1051           high-power "white LED driver". This boost converter is
1052           sometimes used for other things than white LEDs, and
1053           also contains a GPIO pin.
1054
1055 config TPS65010
1056         tristate "TI TPS6501x Power Management chips"
1057         depends on I2C && GPIOLIB
1058         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
1059         help
1060           If you say yes here you get support for the TPS6501x series of
1061           Power Management chips.  These include voltage regulators,
1062           lithium ion/polymer battery charging, and other features that
1063           are often used in portable devices like cell phones and cameras.
1064
1065           This driver can also be built as a module.  If so, the module
1066           will be called tps65010.
1067
1068 config TPS6507X
1069         tristate "TI TPS6507x Power Management / Touch Screen chips"
1070         select MFD_CORE
1071         depends on I2C
1072         help
1073           If you say yes here you get support for the TPS6507x series of
1074           Power Management / Touch Screen chips.  These include voltage
1075           regulators, lithium ion/polymer battery charging, touch screen
1076           and other features that are often used in portable devices.
1077           This driver can also be built as a module.  If so, the module
1078           will be called tps6507x.
1079
1080 config TPS65911_COMPARATOR
1081         tristate
1082
1083 config MFD_TPS65090
1084         bool "TI TPS65090 Power Management chips"
1085         depends on I2C=y
1086         select MFD_CORE
1087         select REGMAP_I2C
1088         select REGMAP_IRQ
1089         help
1090           If you say yes here you get support for the TPS65090 series of
1091           Power Management chips.
1092           This driver provides common support for accessing the device,
1093           additional drivers must be enabled in order to use the
1094           functionality of the device.
1095
1096 config MFD_TPS65217
1097         tristate "TI TPS65217 Power Management / White LED chips"
1098         depends on I2C
1099         select MFD_CORE
1100         select REGMAP_I2C
1101         help
1102           If you say yes here you get support for the TPS65217 series of
1103           Power Management / White LED chips.
1104           These include voltage regulators, lithium ion/polymer battery
1105           charger, wled and other features that are often used in portable
1106           devices.
1107
1108           This driver can also be built as a module.  If so, the module
1109           will be called tps65217.
1110
1111 config MFD_TPS65218
1112         tristate "TI TPS65218 Power Management chips"
1113         depends on I2C
1114         select MFD_CORE
1115         select REGMAP_I2C
1116         select REGMAP_IRQ
1117         help
1118           If you say yes here you get support for the TPS65218 series of
1119           Power Management chips.
1120           These include voltage regulators, gpio and other features
1121           that are often used in portable devices. Only regulator
1122           component is currently supported.
1123
1124           This driver can also be built as a module.  If so, the module
1125           will be called tps65218.
1126
1127 config MFD_TPS6586X
1128         bool "TI TPS6586x Power Management chips"
1129         depends on I2C=y
1130         select MFD_CORE
1131         select REGMAP_I2C
1132         help
1133           If you say yes here you get support for the TPS6586X series of
1134           Power Management chips.
1135           This driver provides common support for accessing the device,
1136           additional drivers must be enabled in order to use the
1137           functionality of the device.
1138
1139           This driver can also be built as a module.  If so, the module
1140           will be called tps6586x.
1141
1142 config MFD_TPS65910
1143         bool "TI TPS65910 Power Management chip"
1144         depends on I2C=y
1145         depends on GPIOLIB || COMPILE_TEST
1146         select MFD_CORE
1147         select REGMAP_I2C
1148         select REGMAP_IRQ
1149         select IRQ_DOMAIN
1150         help
1151           if you say yes here you get support for the TPS65910 series of
1152           Power Management chips.
1153
1154 config MFD_TPS65912
1155         bool "TI TPS65912 Power Management chip"
1156         depends on GPIOLIB
1157         select MFD_CORE
1158         help
1159           If you say yes here you get support for the TPS65912 series of
1160           PM chips.
1161
1162 config MFD_TPS65912_I2C
1163         bool "TI TPS65912 Power Management chip with I2C"
1164         select MFD_CORE
1165         select MFD_TPS65912
1166         depends on I2C=y && GPIOLIB
1167         help
1168           If you say yes here you get support for the TPS65912 series of
1169           PM chips with I2C interface.
1170
1171 config MFD_TPS65912_SPI
1172         bool "TI TPS65912 Power Management chip with SPI"
1173         select MFD_CORE
1174         select MFD_TPS65912
1175         depends on SPI_MASTER && GPIOLIB
1176         help
1177           If you say yes here you get support for the TPS65912 series of
1178           PM chips with SPI interface.
1179
1180 config MFD_TPS80031
1181         bool "TI TPS80031/TPS80032 Power Management chips"
1182         depends on I2C=y
1183         select MFD_CORE
1184         select REGMAP_I2C
1185         select REGMAP_IRQ
1186         help
1187           If you say yes here you get support for the Texas Instruments
1188           TPS80031/ TPS80032 Fully Integrated Power Management with Power
1189           Path and Battery Charger. The device provides five configurable
1190           step-down converters, 11 general purpose LDOs, USB OTG Module,
1191           ADC, RTC, 2 PWM, System Voltage Regulator/Battery Charger with
1192           Power Path from USB, 32K clock generator.
1193
1194 config TWL4030_CORE
1195         bool "TI TWL4030/TWL5030/TWL6030/TPS659x0 Support"
1196         depends on I2C=y
1197         select IRQ_DOMAIN
1198         select REGMAP_I2C
1199         help
1200           Say yes here if you have TWL4030 / TWL6030 family chip on your board.
1201           This core driver provides register access and IRQ handling
1202           facilities, and registers devices for the various functions
1203           so that function-specific drivers can bind to them.
1204
1205           These multi-function chips are found on many OMAP2 and OMAP3
1206           boards, providing power management, RTC, GPIO, keypad, a
1207           high speed USB OTG transceiver, an audio codec (on most
1208           versions) and many other features.
1209
1210 config TWL4030_POWER
1211         bool "TI TWL4030 power resources"
1212         depends on TWL4030_CORE && ARM
1213         help
1214           Say yes here if you want to use the power resources on the
1215           TWL4030 family chips.  Most of these resources are regulators,
1216           which have a separate driver; some are control signals, such
1217           as clock request handshaking.
1218
1219           This driver uses board-specific data to initialize the resources
1220           and load scripts controlling which resources are switched off/on
1221           or reset when a sleep, wakeup or warm reset event occurs.
1222
1223 config MFD_TWL4030_AUDIO
1224         bool "TI TWL4030 Audio"
1225         depends on TWL4030_CORE
1226         select MFD_CORE
1227         default n
1228
1229 config TWL6040_CORE
1230         bool "TI TWL6040 audio codec"
1231         depends on I2C=y
1232         select MFD_CORE
1233         select REGMAP_I2C
1234         select REGMAP_IRQ
1235         default n
1236         help
1237           Say yes here if you want support for Texas Instruments TWL6040 audio
1238           codec.
1239           This driver provides common support for accessing the device,
1240           additional drivers must be enabled in order to use the
1241           functionality of the device (audio, vibra).
1242
1243 config MENELAUS
1244         bool "TI TWL92330/Menelaus PM chip"
1245         depends on I2C=y && ARCH_OMAP2
1246         help
1247           If you say yes here you get support for the Texas Instruments
1248           TWL92330/Menelaus Power Management chip. This include voltage
1249           regulators, Dual slot memory card transceivers, real-time clock
1250           and other features that are often used in portable devices like
1251           cell phones and PDAs.
1252
1253 config MFD_WL1273_CORE
1254         tristate "TI WL1273 FM radio"
1255         depends on I2C
1256         select MFD_CORE
1257         default n
1258         help
1259           This is the core driver for the TI WL1273 FM radio. This MFD
1260           driver connects the radio-wl1273 V4L2 module and the wl1273
1261           audio codec.
1262
1263 config MFD_LM3533
1264         tristate "TI/National Semiconductor LM3533 Lighting Power chip"
1265         depends on I2C
1266         select MFD_CORE
1267         select REGMAP_I2C
1268         help
1269           Say yes here to enable support for National Semiconductor / TI
1270           LM3533 Lighting Power chips.
1271
1272           This driver provides common support for accessing the device;
1273           additional drivers must be enabled in order to use the LED,
1274           backlight or ambient-light-sensor functionality of the device.
1275
1276 config MFD_TIMBERDALE
1277         tristate "Timberdale FPGA"
1278         select MFD_CORE
1279         depends on PCI && GPIOLIB && (X86_32 || COMPILE_TEST)
1280         ---help---
1281         This is the core driver for the timberdale FPGA. This device is a
1282         multifunction device which exposes numerous platform devices.
1283
1284         The timberdale FPGA can be found on the Intel Atom development board
1285         for in-vehicle infontainment, called Russellville.
1286
1287 config MFD_TC3589X
1288         bool "Toshiba TC35892 and variants"
1289         depends on I2C=y
1290         depends on OF
1291         select MFD_CORE
1292         help
1293           Support for the Toshiba TC35892 and variants I/O Expander.
1294
1295           This driver provides common support for accessing the device,
1296           additional drivers must be enabled in order to use the
1297           functionality of the device.
1298
1299 config MFD_TMIO
1300         bool
1301         default n
1302
1303 config MFD_T7L66XB
1304         bool "Toshiba T7L66XB"
1305         depends on ARM && HAVE_CLK
1306         select MFD_CORE
1307         select MFD_TMIO
1308         help
1309           Support for Toshiba Mobile IO Controller T7L66XB
1310
1311 config MFD_TC6387XB
1312         bool "Toshiba TC6387XB"
1313         depends on ARM && HAVE_CLK
1314         select MFD_CORE
1315         select MFD_TMIO
1316         help
1317           Support for Toshiba Mobile IO Controller TC6387XB
1318
1319 config MFD_TC6393XB
1320         bool "Toshiba TC6393XB"
1321         depends on ARM && HAVE_CLK
1322         select GPIOLIB
1323         select MFD_CORE
1324         select MFD_TMIO
1325         help
1326           Support for Toshiba Mobile IO Controller TC6393XB
1327
1328 config MFD_VX855
1329         tristate "VIA VX855/VX875 integrated south bridge"
1330         depends on PCI
1331         select MFD_CORE
1332         help
1333           Say yes here to enable support for various functions of the
1334           VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
1335           and/or vx855_gpio drivers for this to do anything useful.
1336
1337 config MFD_ARIZONA
1338         select REGMAP
1339         select REGMAP_IRQ
1340         select MFD_CORE
1341         bool
1342
1343 config MFD_ARIZONA_I2C
1344         tristate "Wolfson Microelectronics Arizona platform with I2C"
1345         select MFD_ARIZONA
1346         select MFD_CORE
1347         select REGMAP_I2C
1348         depends on I2C
1349         help
1350           Support for the Wolfson Microelectronics Arizona platform audio SoC
1351           core functionality controlled via I2C.
1352
1353 config MFD_ARIZONA_SPI
1354         tristate "Wolfson Microelectronics Arizona platform with SPI"
1355         select MFD_ARIZONA
1356         select MFD_CORE
1357         select REGMAP_SPI
1358         depends on SPI_MASTER
1359         help
1360           Support for the Wolfson Microelectronics Arizona platform audio SoC
1361           core functionality controlled via I2C.
1362
1363 config MFD_WM5102
1364         bool "Wolfson Microelectronics WM5102"
1365         depends on MFD_ARIZONA
1366         help
1367           Support for Wolfson Microelectronics WM5102 low power audio SoC
1368
1369 config MFD_WM5110
1370         bool "Wolfson Microelectronics WM5110 and WM8280/WM8281"
1371         depends on MFD_ARIZONA
1372         help
1373           Support for Wolfson Microelectronics WM5110 and WM8280/WM8281
1374           low power audio SoC
1375
1376 config MFD_WM8997
1377         bool "Wolfson Microelectronics WM8997"
1378         depends on MFD_ARIZONA
1379         help
1380           Support for Wolfson Microelectronics WM8997 low power audio SoC
1381
1382 config MFD_WM8400
1383         bool "Wolfson Microelectronics WM8400"
1384         select MFD_CORE
1385         depends on I2C=y
1386         select REGMAP_I2C
1387         help
1388           Support for the Wolfson Microelecronics WM8400 PMIC and audio
1389           CODEC.  This driver provides common support for accessing
1390           the device, additional drivers must be enabled in order to use
1391           the functionality of the device.
1392
1393 config MFD_WM831X
1394         bool
1395
1396 config MFD_WM831X_I2C
1397         bool "Wolfson Microelectronics WM831x/2x PMICs with I2C"
1398         select MFD_CORE
1399         select MFD_WM831X
1400         select REGMAP_I2C
1401         select IRQ_DOMAIN
1402         depends on I2C=y
1403         help
1404           Support for the Wolfson Microelecronics WM831x and WM832x PMICs
1405           when controlled using I2C.  This driver provides common support
1406           for accessing the device, additional drivers must be enabled in
1407           order to use the functionality of the device.
1408
1409 config MFD_WM831X_SPI
1410         bool "Wolfson Microelectronics WM831x/2x PMICs with SPI"
1411         select MFD_CORE
1412         select MFD_WM831X
1413         select REGMAP_SPI
1414         select IRQ_DOMAIN
1415         depends on SPI_MASTER
1416         help
1417           Support for the Wolfson Microelecronics WM831x and WM832x PMICs
1418           when controlled using SPI.  This driver provides common support
1419           for accessing the device, additional drivers must be enabled in
1420           order to use the functionality of the device.
1421
1422 config MFD_WM8350
1423         bool
1424
1425 config MFD_WM8350_I2C
1426         bool "Wolfson Microelectronics WM8350 with I2C"
1427         select MFD_WM8350
1428         depends on I2C=y
1429         help
1430           The WM8350 is an integrated audio and power management
1431           subsystem with watchdog and RTC functionality for embedded
1432           systems.  This option enables core support for the WM8350 with
1433           I2C as the control interface.  Additional options must be
1434           selected to enable support for the functionality of the chip.
1435
1436 config MFD_WM8994
1437         tristate "Wolfson Microelectronics WM8994"
1438         select MFD_CORE
1439         select REGMAP_I2C
1440         select REGMAP_IRQ
1441         depends on I2C
1442         help
1443           The WM8994 is a highly integrated hi-fi CODEC designed for
1444           smartphone applications.  As well as audio functionality it
1445           has on board GPIO and regulator functionality which is
1446           supported via the relevant subsystems.  This driver provides
1447           core support for the WM8994, in order to use the actual
1448           functionaltiy of the device other drivers must be enabled.
1449
1450 config MFD_STW481X
1451         tristate "Support for ST Microelectronics STw481x"
1452         depends on I2C && ARCH_NOMADIK
1453         select REGMAP_I2C
1454         select MFD_CORE
1455         help
1456           Select this option to enable the STw481x chip driver used
1457           in various ST Microelectronics and ST-Ericsson embedded
1458           Nomadik series.
1459
1460 menu "Multimedia Capabilities Port drivers"
1461         depends on ARCH_SA1100
1462
1463 config MCP
1464         tristate
1465
1466 # Interface drivers
1467 config MCP_SA11X0
1468         tristate "Support SA11x0 MCP interface"
1469         depends on ARCH_SA1100
1470         select MCP
1471
1472 # Chip drivers
1473 config MCP_UCB1200
1474         tristate "Support for UCB1200 / UCB1300"
1475         depends on MCP_SA11X0
1476         select MCP
1477
1478 config MCP_UCB1200_TS
1479         tristate "Touchscreen interface support"
1480         depends on MCP_UCB1200 && INPUT
1481
1482 endmenu
1483
1484 config MFD_VEXPRESS_SYSREG
1485         bool "Versatile Express System Registers"
1486         depends on VEXPRESS_CONFIG && GPIOLIB
1487         default y
1488         select CLKSRC_MMIO
1489         select GPIO_GENERIC_PLATFORM
1490         select MFD_CORE
1491         select MFD_SYSCON
1492         help
1493           System Registers are the platform configuration block
1494           on the ARM Ltd. Versatile Express board.
1495
1496 endmenu
1497 endif