drivers/mfd/Kconfig

   1 #
   2 # Multifunction miscellaneous devices
   3 #
   4
   5 menu "Multifunction device drivers"
   6         depends on HAS_IOMEM
   7
   8 config MFD_CORE
   9         tristate
  10         default n
  11
  12 config MFD_88PM860X
  13         bool "Support Marvell 88PM8606/88PM8607"
  14         depends on I2C=y
  15         select MFD_CORE
  16         help
  17           This supports for Marvell 88PM8606/88PM8607 Power Management IC.
  18           This includes the I2C driver and the core APIs _only_, you have to
  19           select individual components like voltage regulators, RTC and
  20           battery-charger under the corresponding menus.
  21
  22 config MFD_SM501
  23         tristate "Support for Silicon Motion SM501"
  24          ---help---
  25           This is the core driver for the Silicon Motion SM501 multimedia
  26           companion chip. This device is a multifunction device which may
  27           provide numerous interfaces including USB host controller, USB gadget,
  28           asynchronous serial ports, audio functions, and a dual display video
  29           interface. The device may be connected by PCI or local bus with
  30           varying functions enabled.
  31
  32 config MFD_SM501_GPIO
  33         bool "Export GPIO via GPIO layer"
  34         depends on MFD_SM501 && GPIOLIB
  35          ---help---
  36          This option uses the gpio library layer to export the 64 GPIO
  37          lines on the SM501. The platform data is used to supply the
  38          base number for the first GPIO line to register.
  39
  40 config MFD_ASIC3
  41         bool "Support for Compaq ASIC3"
  42         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  43         select MFD_CORE
  44          ---help---
  45           This driver supports the ASIC3 multifunction chip found on many
  46           PDAs (mainly iPAQ and HTC based ones)
  47
  48 config MFD_SH_MOBILE_SDHI
  49         bool "Support for SuperH Mobile SDHI"
  50         depends on SUPERH || ARCH_SHMOBILE
  51         select MFD_CORE
  52          ---help---
  53           This driver supports the SDHI hardware block found in many
  54           SuperH Mobile SoCs.
  55
  56 config MFD_DM355EVM_MSP
  57         bool "DaVinci DM355 EVM microcontroller"
  58         depends on I2C && MACH_DAVINCI_DM355_EVM
  59         help
  60           This driver supports the MSP430 microcontroller used on these
  61           boards.  MSP430 firmware manages resets and power sequencing,
  62           inputs from buttons and the IR remote, LEDs, an RTC, and more.
  63
  64 config HTC_EGPIO
  65         bool "HTC EGPIO support"
  66         depends on GENERIC_HARDIRQS && GPIOLIB && ARM
  67         help
  68             This driver supports the CPLD egpio chip present on
  69             several HTC phones.  It provides basic support for input
  70             pins, output pins, and irqs.
  71
  72 config HTC_PASIC3
  73         tristate "HTC PASIC3 LED/DS1WM chip support"
  74         select MFD_CORE
  75         help
  76           This core driver provides register access for the LED/DS1WM
  77           chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
  78           HTC Magician devices, respectively. Actual functionality is
  79           handled by the leds-pasic3 and ds1wm drivers.
  80
  81 config HTC_I2CPLD
  82         bool "HTC I2C PLD chip support"
  83         depends on I2C=y && GPIOLIB
  84         help
  85           If you say yes here you get support for the supposed CPLD
  86           found on omap850 HTC devices like the HTC Wizard and HTC Herald.
  87           This device provides input and output GPIOs through an I2C
  88           interface to one or more sub-chips.
  89
  90 config UCB1400_CORE
  91         tristate "Philips UCB1400 Core driver"
  92         depends on AC97_BUS
  93         depends on GPIOLIB
  94         help
  95           This enables support for the Philips UCB1400 core functions.
  96           The UCB1400 is an AC97 audio codec.
  97
  98           To compile this driver as a module, choose M here: the
  99           module will be called ucb1400_core.
 100
 101 config TPS65010
 102         tristate "TPS6501x Power Management chips"
 103         depends on I2C && GPIOLIB
 104         default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
 105         help
 106           If you say yes here you get support for the TPS6501x series of
 107           Power Management chips.  These include voltage regulators,
 108           lithium ion/polymer battery charging, and other features that
 109           are often used in portable devices like cell phones and cameras.
 110
 111           This driver can also be built as a module.  If so, the module
 112           will be called tps65010.
 113
 114 config MENELAUS
 115         bool "Texas Instruments TWL92330/Menelaus PM chip"
 116         depends on I2C=y && ARCH_OMAP2
 117         help
 118           If you say yes here you get support for the Texas Instruments
 119           TWL92330/Menelaus Power Management chip. This include voltage
 120           regulators, Dual slot memory card transceivers, real-time clock
 121           and other features that are often used in portable devices like
 122           cell phones and PDAs.
 123
 124 config TWL4030_CORE
 125         bool "Texas Instruments TWL4030/TWL5030/TWL6030/TPS659x0 Support"
 126         depends on I2C=y && GENERIC_HARDIRQS
 127         help
 128           Say yes here if you have TWL4030 / TWL6030 family chip on your board.
 129           This core driver provides register access and IRQ handling
 130           facilities, and registers devices for the various functions
 131           so that function-specific drivers can bind to them.
 132
 133           These multi-function chips are found on many OMAP2 and OMAP3
 134           boards, providing power management, RTC, GPIO, keypad, a
 135           high speed USB OTG transceiver, an audio codec (on most
 136           versions) and many other features.
 137
 138 config TWL4030_POWER
 139         bool "Support power resources on TWL4030 family chips"
 140         depends on TWL4030_CORE && ARM
 141         help
 142           Say yes here if you want to use the power resources on the
 143           TWL4030 family chips.  Most of these resources are regulators,
 144           which have a separate driver; some are control signals, such
 145           as clock request handshaking.
 146
 147           This driver uses board-specific data to initialize the resources
 148           and load scripts controling which resources are switched off/on
 149           or reset when a sleep, wakeup or warm reset event occurs.
 150
 151 config TWL4030_CODEC
 152         bool
 153         depends on TWL4030_CORE
 154         select MFD_CORE
 155         default n
 156
 157 config MFD_TMIO
 158         bool
 159         default n
 160
 161 config MFD_T7L66XB
 162         bool "Support Toshiba T7L66XB"
 163         depends on ARM && HAVE_CLK
 164         select MFD_CORE
 165         select MFD_TMIO
 166         help
 167           Support for Toshiba Mobile IO Controller T7L66XB
 168
 169 config MFD_TC6387XB
 170         bool "Support Toshiba TC6387XB"
 171         depends on ARM && HAVE_CLK
 172         select MFD_CORE
 173         select MFD_TMIO
 174         help
 175           Support for Toshiba Mobile IO Controller TC6387XB
 176
 177 config MFD_TC6393XB
 178         bool "Support Toshiba TC6393XB"
 179         depends on GPIOLIB && ARM
 180         select MFD_CORE
 181         select MFD_TMIO
 182         help
 183           Support for Toshiba Mobile IO Controller TC6393XB
 184
 185 config PMIC_DA903X
 186         bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
 187         depends on I2C=y
 188         help
 189           Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
 190           ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
 191           usually found on PXA processors-based platforms. This includes
 192           the I2C driver and the core APIs _only_, you have to select
 193           individual components like LCD backlight, voltage regulators,
 194           LEDs and battery-charger under the corresponding menus.
 195
 196 config PMIC_ADP5520
 197         bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
 198         depends on I2C=y
 199         help
 200           Say yes here to add support for Analog Devices AD5520 and ADP5501,
 201           Multifunction Power Management IC. This includes
 202           the I2C driver and the core APIs _only_, you have to select
 203           individual components like LCD backlight, LEDs, GPIOs and Kepad
 204           under the corresponding menus.
 205
 206 config MFD_MAX8925
 207         bool "Maxim Semiconductor MAX8925 PMIC Support"
 208         depends on I2C=y
 209         select MFD_CORE
 210         help
 211           Say yes here to support for Maxim Semiconductor MAX8925. This is
 212           a Power Management IC. This driver provies common support for
 213           accessing the device, additional drivers must be enabled in order
 214           to use the functionality of the device.
 215
 216 config MFD_WM8400
 217         tristate "Support Wolfson Microelectronics WM8400"
 218         select MFD_CORE
 219         depends on I2C
 220         help
 221           Support for the Wolfson Microelecronics WM8400 PMIC and audio
 222           CODEC.  This driver provides common support for accessing
 223           the device, additional drivers must be enabled in order to use
 224           the functionality of the device.
 225
 226 config MFD_WM831X
 227         bool "Support Wolfson Microelectronics WM831x/2x PMICs"
 228         select MFD_CORE
 229         depends on I2C=y
 230         help
 231           Support for the Wolfson Microelecronics WM831x and WM832x PMICs.
 232           This driver provides common support for accessing the device,
 233           additional drivers must be enabled in order to use the
 234           functionality of the device.
 235
 236 config MFD_WM8350
 237         bool
 238
 239 config MFD_WM8350_CONFIG_MODE_0
 240         bool
 241         depends on MFD_WM8350
 242
 243 config MFD_WM8350_CONFIG_MODE_1
 244         bool
 245         depends on MFD_WM8350
 246
 247 config MFD_WM8350_CONFIG_MODE_2
 248         bool
 249         depends on MFD_WM8350
 250
 251 config MFD_WM8350_CONFIG_MODE_3
 252         bool
 253         depends on MFD_WM8350
 254
 255 config MFD_WM8351_CONFIG_MODE_0
 256         bool
 257         depends on MFD_WM8350
 258
 259 config MFD_WM8351_CONFIG_MODE_1
 260         bool
 261         depends on MFD_WM8350
 262
 263 config MFD_WM8351_CONFIG_MODE_2
 264         bool
 265         depends on MFD_WM8350
 266
 267 config MFD_WM8351_CONFIG_MODE_3
 268         bool
 269         depends on MFD_WM8350
 270
 271 config MFD_WM8352_CONFIG_MODE_0
 272         bool
 273         depends on MFD_WM8350
 274
 275 config MFD_WM8352_CONFIG_MODE_1
 276         bool
 277         depends on MFD_WM8350
 278
 279 config MFD_WM8352_CONFIG_MODE_2
 280         bool
 281         depends on MFD_WM8350
 282
 283 config MFD_WM8352_CONFIG_MODE_3
 284         bool
 285         depends on MFD_WM8350
 286
 287 config MFD_WM8350_I2C
 288         bool "Support Wolfson Microelectronics WM8350 with I2C"
 289         select MFD_WM8350
 290         depends on I2C=y
 291         help
 292           The WM8350 is an integrated audio and power management
 293           subsystem with watchdog and RTC functionality for embedded
 294           systems.  This option enables core support for the WM8350 with
 295           I2C as the control interface.  Additional options must be
 296           selected to enable support for the functionality of the chip.
 297
 298 config MFD_WM8994
 299         tristate "Support Wolfson Microelectronics WM8994"
 300         select MFD_CORE
 301         depends on I2C
 302         help
 303           The WM8994 is a highly integrated hi-fi CODEC designed for
 304           smartphone applicatiosn.  As well as audio functionality it
 305           has on board GPIO and regulator functionality which is
 306           supported via the relevant subsystems.  This driver provides
 307           core support for the WM8994, in order to use the actual
 308           functionaltiy of the device other drivers must be enabled.
 309
 310 config MFD_PCF50633
 311         tristate "Support for NXP PCF50633"
 312         depends on I2C
 313         help
 314           Say yes here if you have NXP PCF50633 chip on your board.
 315           This core driver provides register access and IRQ handling
 316           facilities, and registers devices for the various functions
 317           so that function-specific drivers can bind to them.
 318
 319 config MFD_MC13783
 320         tristate "Support Freescale MC13783"
 321         depends on SPI_MASTER
 322         select MFD_CORE
 323         help
 324           Support for the Freescale (Atlas) MC13783 PMIC and audio CODEC.
 325           This driver provides common support for accessing  the device,
 326           additional drivers must be enabled in order to use the
 327           functionality of the device.
 328
 329 config PCF50633_ADC
 330         tristate "Support for NXP PCF50633 ADC"
 331         depends on MFD_PCF50633
 332         help
 333          Say yes here if you want to include support for ADC in the
 334          NXP PCF50633 chip.
 335
 336 config PCF50633_GPIO
 337         tristate "Support for NXP PCF50633 GPIO"
 338         depends on MFD_PCF50633
 339         help
 340          Say yes here if you want to include support GPIO for pins on
 341          the PCF50633 chip.
 342
 343 config AB3100_CORE
 344         bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
 345         depends on I2C=y
 346         default y if ARCH_U300
 347         help
 348           Select this to enable the AB3100 Mixed Signal IC core
 349           functionality. This connects to a AB3100 on the I2C bus
 350           and expose a number of symbols needed for dependent devices
 351           to read and write registers and subscribe to events from
 352           this multi-functional IC. This is needed to use other features
 353           of the AB3100 such as battery-backed RTC, charging control,
 354           LEDs, vibrator, system power and temperature, power management
 355           and ALSA sound.
 356
 357 config AB3100_OTP
 358         tristate "ST-Ericsson AB3100 OTP functions"
 359         depends on AB3100_CORE
 360         default y if AB3100_CORE
 361         help
 362           Select this to enable the AB3100 Mixed Signal IC OTP (one-time
 363           programmable memory) support. This exposes a sysfs file to read
 364           out OTP values.
 365
 366 config EZX_PCAP
 367         bool "PCAP Support"
 368         depends on GENERIC_HARDIRQS && SPI_MASTER
 369         help
 370           This enables the PCAP ASIC present on EZX Phones. This is
 371           needed for MMC, TouchScreen, Sound, USB, etc..
 372
 373 config AB4500_CORE
 374         tristate "ST-Ericsson's AB4500 Mixed Signal Power management chip"
 375         depends on SPI
 376         help
 377           Select this option to enable access to AB4500 power management
 378           chip. This connects to U8500 on the SSP/SPI bus and exports
 379           read/write functions for the devices to get access to this chip.
 380           This chip embeds various other multimedia funtionalities as well.
 381
 382 config MFD_TIMBERDALE
 383         tristate "Support for the Timberdale FPGA"
 384         select MFD_CORE
 385         depends on PCI && GPIOLIB
 386         ---help---
 387         This is the core driver for the timberdale FPGA. This device is a
 388         multifunction device which exposes numerous platform devices.
 389
 390         The timberdale FPGA can be found on the Intel Atom development board
 391         for in-vehicle infontainment, called Russellville.
 392
 393 config LPC_SCH
 394         tristate "Intel SCH LPC"
 395         depends on PCI
 396         select MFD_CORE
 397         help
 398           LPC bridge function of the Intel SCH provides support for
 399           System Management Bus and General Purpose I/O.
 400
 401 endmenu
 402
 403 menu "Multimedia Capabilities Port drivers"
 404         depends on ARCH_SA1100
 405
 406 config MCP
 407         tristate
 408
 409 # Interface drivers
 410 config MCP_SA11X0
 411         tristate "Support SA11x0 MCP interface"
 412         depends on ARCH_SA1100
 413         select MCP
 414
 415 # Chip drivers
 416 config MCP_UCB1200
 417         tristate "Support for UCB1200 / UCB1300"
 418         depends on MCP
 419
 420 config MCP_UCB1200_TS
 421         tristate "Touchscreen interface support"
 422         depends on MCP_UCB1200 && INPUT
 423
 424 endmenu