ARM: 5731/2: Fix U300 generic GPIO, remove ifdefs from MMCI v3

[deliverable/linux.git] / drivers / mmc / host / mmci.c

/*
 *  linux/drivers/mmc/host/mmci.c - ARM PrimeCell MMCI PL180/1 driver
 *
 *  Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/highmem.h>
#include <linux/log2.h>
#include <linux/mmc/host.h>
#include <linux/amba/bus.h>
#include <linux/clk.h>
#include <linux/scatterlist.h>
#include <linux/gpio.h>
#include <linux/amba/mmci.h>
#include <linux/regulator/consumer.h>

#include <asm/cacheflush.h>
#include <asm/div64.h>
#include <asm/io.h>
#include <asm/sizes.h>

#include "mmci.h"

#define DRIVER_NAME "mmci-pl18x"

#define DBG(host,fmt,args...)   \
        pr_debug("%s: %s: " fmt, mmc_hostname(host->mmc), __func__ , args)

static unsigned int fmax = 515633;

/*
 * This must be called with host->lock held
 */
static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired)
{
        u32 clk = 0;

        if (desired) {
                if (desired >= host->mclk) {
                        clk = MCI_CLK_BYPASS;
                        host->cclk = host->mclk;
                } else {
                        clk = host->mclk / (2 * desired) - 1;
                        if (clk >= 256)
                                clk = 255;
                        host->cclk = host->mclk / (2 * (clk + 1));
                }
                if (host->hw_designer == 0x80)
                        clk |= MCI_FCEN; /* Bug fix in ST IP block */
                clk |= MCI_CLK_ENABLE;
                /* This hasn't proven to be worthwhile */
                /* clk |= MCI_CLK_PWRSAVE; */
        }

        if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4)
                clk |= MCI_WIDE_BUS;

        writel(clk, host->base + MMCICLOCK);
}

static void
mmci_request_end(struct mmci_host *host, struct mmc_request *mrq)
{
        writel(0, host->base + MMCICOMMAND);

        BUG_ON(host->data);

        host->mrq = NULL;
        host->cmd = NULL;

        if (mrq->data)
                mrq->data->bytes_xfered = host->data_xfered;

        /*
         * Need to drop the host lock here; mmc_request_done may call
         * back into the driver...
         */
        spin_unlock(&host->lock);
        mmc_request_done(host->mmc, mrq);
        spin_lock(&host->lock);
}

static void mmci_stop_data(struct mmci_host *host)
{
        writel(0, host->base + MMCIDATACTRL);
        writel(0, host->base + MMCIMASK1);
        host->data = NULL;
}

static void mmci_start_data(struct mmci_host *host, struct mmc_data *data)
{
        unsigned int datactrl, timeout, irqmask;
        unsigned long long clks;
        void __iomem *base;
        int blksz_bits;

        DBG(host, "blksz %04x blks %04x flags %08x\n",
            data->blksz, data->blocks, data->flags);

        host->data = data;
        host->size = data->blksz;
        host->data_xfered = 0;

        mmci_init_sg(host, data);

        clks = (unsigned long long)data->timeout_ns * host->cclk;
        do_div(clks, 1000000000UL);

        timeout = data->timeout_clks + (unsigned int)clks;

        base = host->base;
        writel(timeout, base + MMCIDATATIMER);
        writel(host->size, base + MMCIDATALENGTH);

        blksz_bits = ffs(data->blksz) - 1;
        BUG_ON(1 << blksz_bits != data->blksz);

        datactrl = MCI_DPSM_ENABLE | blksz_bits << 4;
        if (data->flags & MMC_DATA_READ) {
                datactrl |= MCI_DPSM_DIRECTION;
                irqmask = MCI_RXFIFOHALFFULLMASK;

                /*
                 * If we have less than a FIFOSIZE of bytes to transfer,
                 * trigger a PIO interrupt as soon as any data is available.
                 */
                if (host->size < MCI_FIFOSIZE)
                        irqmask |= MCI_RXDATAAVLBLMASK;
        } else {
                /*
                 * We don't actually need to include "FIFO empty" here
                 * since its implicit in "FIFO half empty".
                 */
                irqmask = MCI_TXFIFOHALFEMPTYMASK;
        }

        writel(datactrl, base + MMCIDATACTRL);
        writel(readl(base + MMCIMASK0) & ~MCI_DATAENDMASK, base + MMCIMASK0);
        writel(irqmask, base + MMCIMASK1);
}

static void
mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
{
        void __iomem *base = host->base;

        DBG(host, "op %02x arg %08x flags %08x\n",
            cmd->opcode, cmd->arg, cmd->flags);

        if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) {
                writel(0, base + MMCICOMMAND);
                udelay(1);
        }

        c |= cmd->opcode | MCI_CPSM_ENABLE;
        if (cmd->flags & MMC_RSP_PRESENT) {
                if (cmd->flags & MMC_RSP_136)
                        c |= MCI_CPSM_LONGRSP;
                c |= MCI_CPSM_RESPONSE;
        }
        if (/*interrupt*/0)
                c |= MCI_CPSM_INTERRUPT;

        host->cmd = cmd;

        writel(cmd->arg, base + MMCIARGUMENT);
        writel(c, base + MMCICOMMAND);
}

static void
mmci_data_irq(struct mmci_host *host, struct mmc_data *data,
              unsigned int status)
{
        if (status & MCI_DATABLOCKEND) {
                host->data_xfered += data->blksz;
        }
        if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|MCI_RXOVERRUN)) {
                if (status & MCI_DATACRCFAIL)
                        data->error = -EILSEQ;
                else if (status & MCI_DATATIMEOUT)
                        data->error = -ETIMEDOUT;
                else if (status & (MCI_TXUNDERRUN|MCI_RXOVERRUN))
                        data->error = -EIO;
                status |= MCI_DATAEND;

                /*
                 * We hit an error condition.  Ensure that any data
                 * partially written to a page is properly coherent.
                 */
                if (host->sg_len && data->flags & MMC_DATA_READ)
                        flush_dcache_page(sg_page(host->sg_ptr));
        }
        if (status & MCI_DATAEND) {
                mmci_stop_data(host);

                if (!data->stop) {
                        mmci_request_end(host, data->mrq);
                } else {
                        mmci_start_command(host, data->stop, 0);
                }
        }
}

static void
mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
             unsigned int status)
{
        void __iomem *base = host->base;

        host->cmd = NULL;

        cmd->resp[0] = readl(base + MMCIRESPONSE0);
        cmd->resp[1] = readl(base + MMCIRESPONSE1);
        cmd->resp[2] = readl(base + MMCIRESPONSE2);
        cmd->resp[3] = readl(base + MMCIRESPONSE3);

        if (status & MCI_CMDTIMEOUT) {
                cmd->error = -ETIMEDOUT;
        } else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) {
                cmd->error = -EILSEQ;
        }

        if (!cmd->data || cmd->error) {
                if (host->data)
                        mmci_stop_data(host);
                mmci_request_end(host, cmd->mrq);
        } else if (!(cmd->data->flags & MMC_DATA_READ)) {
                mmci_start_data(host, cmd->data);
        }
}

static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int remain)
{
        void __iomem *base = host->base;
        char *ptr = buffer;
        u32 status;
        int host_remain = host->size;

        do {
                int count = host_remain - (readl(base + MMCIFIFOCNT) << 2);

                if (count > remain)
                        count = remain;

                if (count <= 0)
                        break;

                readsl(base + MMCIFIFO, ptr, count >> 2);

                ptr += count;
                remain -= count;
                host_remain -= count;

                if (remain == 0)
                        break;

                status = readl(base + MMCISTATUS);
        } while (status & MCI_RXDATAAVLBL);

        return ptr - buffer;
}

static int mmci_pio_write(struct mmci_host *host, char *buffer, unsigned int remain, u32 status)
{
        void __iomem *base = host->base;
        char *ptr = buffer;

        do {
                unsigned int count, maxcnt;

                maxcnt = status & MCI_TXFIFOEMPTY ? MCI_FIFOSIZE : MCI_FIFOHALFSIZE;
                count = min(remain, maxcnt);

                writesl(base + MMCIFIFO, ptr, count >> 2);

                ptr += count;
                remain -= count;

                if (remain == 0)
                        break;

                status = readl(base + MMCISTATUS);
        } while (status & MCI_TXFIFOHALFEMPTY);

        return ptr - buffer;
}

/*
 * PIO data transfer IRQ handler.
 */
static irqreturn_t mmci_pio_irq(int irq, void *dev_id)
{
        struct mmci_host *host = dev_id;
        void __iomem *base = host->base;
        u32 status;

        status = readl(base + MMCISTATUS);

        DBG(host, "irq1 %08x\n", status);

        do {
                unsigned long flags;
                unsigned int remain, len;
                char *buffer;

                /*
                 * For write, we only need to test the half-empty flag
                 * here - if the FIFO is completely empty, then by
                 * definition it is more than half empty.
                 *
                 * For read, check for data available.
                 */
                if (!(status & (MCI_TXFIFOHALFEMPTY|MCI_RXDATAAVLBL)))
                        break;

                /*
                 * Map the current scatter buffer.
                 */
                buffer = mmci_kmap_atomic(host, &flags) + host->sg_off;
                remain = host->sg_ptr->length - host->sg_off;

                len = 0;
                if (status & MCI_RXACTIVE)
                        len = mmci_pio_read(host, buffer, remain);
                if (status & MCI_TXACTIVE)
                        len = mmci_pio_write(host, buffer, remain, status);

                /*
                 * Unmap the buffer.
                 */
                mmci_kunmap_atomic(host, buffer, &flags);

                host->sg_off += len;
                host->size -= len;
                remain -= len;

                if (remain)
                        break;

                /*
                 * If we were reading, and we have completed this
                 * page, ensure that the data cache is coherent.
                 */
                if (status & MCI_RXACTIVE)
                        flush_dcache_page(sg_page(host->sg_ptr));

                if (!mmci_next_sg(host))
                        break;

                status = readl(base + MMCISTATUS);
        } while (1);

        /*
         * If we're nearing the end of the read, switch to
         * "any data available" mode.
         */
        if (status & MCI_RXACTIVE && host->size < MCI_FIFOSIZE)
                writel(MCI_RXDATAAVLBLMASK, base + MMCIMASK1);

        /*
         * If we run out of data, disable the data IRQs; this
         * prevents a race where the FIFO becomes empty before
         * the chip itself has disabled the data path, and
         * stops us racing with our data end IRQ.
         */
        if (host->size == 0) {
                writel(0, base + MMCIMASK1);
                writel(readl(base + MMCIMASK0) | MCI_DATAENDMASK, base + MMCIMASK0);
        }

        return IRQ_HANDLED;
}

/*
 * Handle completion of command and data transfers.
 */
static irqreturn_t mmci_irq(int irq, void *dev_id)
{
        struct mmci_host *host = dev_id;
        u32 status;
        int ret = 0;

        spin_lock(&host->lock);

        do {
                struct mmc_command *cmd;
                struct mmc_data *data;

                status = readl(host->base + MMCISTATUS);
                status &= readl(host->base + MMCIMASK0);
                writel(status, host->base + MMCICLEAR);

                DBG(host, "irq0 %08x\n", status);

                data = host->data;
                if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_TXUNDERRUN|
                              MCI_RXOVERRUN|MCI_DATAEND|MCI_DATABLOCKEND) && data)
                        mmci_data_irq(host, data, status);

                cmd = host->cmd;
                if (status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT|MCI_CMDRESPEND) && cmd)
                        mmci_cmd_irq(host, cmd, status);

                ret = 1;
        } while (status);

        spin_unlock(&host->lock);

        return IRQ_RETVAL(ret);
}

static void mmci_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
        struct mmci_host *host = mmc_priv(mmc);
        unsigned long flags;

        WARN_ON(host->mrq != NULL);

        if (mrq->data && !is_power_of_2(mrq->data->blksz)) {
                printk(KERN_ERR "%s: Unsupported block size (%d bytes)\n",
                        mmc_hostname(mmc), mrq->data->blksz);
                mrq->cmd->error = -EINVAL;
                mmc_request_done(mmc, mrq);
                return;
        }

        spin_lock_irqsave(&host->lock, flags);

        host->mrq = mrq;

        if (mrq->data && mrq->data->flags & MMC_DATA_READ)
                mmci_start_data(host, mrq->data);

        mmci_start_command(host, mrq->cmd, 0);

        spin_unlock_irqrestore(&host->lock, flags);
}

static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
        struct mmci_host *host = mmc_priv(mmc);
        u32 pwr = 0;
        unsigned long flags;

        switch (ios->power_mode) {
        case MMC_POWER_OFF:
                if(host->vcc &&
                   regulator_is_enabled(host->vcc))
                        regulator_disable(host->vcc);
                break;
        case MMC_POWER_UP:
#ifdef CONFIG_REGULATOR
                if (host->vcc)
                        /* This implicitly enables the regulator */
                        mmc_regulator_set_ocr(host->vcc, ios->vdd);
#endif
                /*
                 * The translate_vdd function is not used if you have
                 * an external regulator, or your design is really weird.
                 * Using it would mean sending in power control BOTH using
                 * a regulator AND the 4 MMCIPWR bits. If we don't have
                 * a regulator, we might have some other platform specific
                 * power control behind this translate function.
                 */
                if (!host->vcc && host->plat->translate_vdd)
                        pwr |= host->plat->translate_vdd(mmc_dev(mmc), ios->vdd);
                /* The ST version does not have this, fall through to POWER_ON */
                if (host->hw_designer != AMBA_VENDOR_ST) {
                        pwr |= MCI_PWR_UP;
                        break;
                }
        case MMC_POWER_ON:
                pwr |= MCI_PWR_ON;
                break;
        }

        if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) {
                if (host->hw_designer != AMBA_VENDOR_ST)
                        pwr |= MCI_ROD;
                else {
                        /*
                         * The ST Micro variant use the ROD bit for something
                         * else and only has OD (Open Drain).
                         */
                        pwr |= MCI_OD;
                }
        }

        spin_lock_irqsave(&host->lock, flags);

        mmci_set_clkreg(host, ios->clock);

        if (host->pwr != pwr) {
                host->pwr = pwr;
                writel(pwr, host->base + MMCIPOWER);
        }

        spin_unlock_irqrestore(&host->lock, flags);
}

static int mmci_get_ro(struct mmc_host *mmc)
{
        struct mmci_host *host = mmc_priv(mmc);

        if (host->gpio_wp == -ENOSYS)
                return -ENOSYS;

        return gpio_get_value(host->gpio_wp);
}

static int mmci_get_cd(struct mmc_host *mmc)
{
        struct mmci_host *host = mmc_priv(mmc);
        unsigned int status;

        if (host->gpio_cd == -ENOSYS)
                status = host->plat->status(mmc_dev(host->mmc));
        else
                status = gpio_get_value(host->gpio_cd);

        return !status;
}

static const struct mmc_host_ops mmci_ops = {
        .request        = mmci_request,
        .set_ios        = mmci_set_ios,
        .get_ro         = mmci_get_ro,
        .get_cd         = mmci_get_cd,
};

static void mmci_check_status(unsigned long data)
{
        struct mmci_host *host = (struct mmci_host *)data;
        unsigned int status = mmci_get_cd(host->mmc);

        if (status ^ host->oldstat)
                mmc_detect_change(host->mmc, 0);

        host->oldstat = status;
        mod_timer(&host->timer, jiffies + HZ);
}

static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
{
        struct mmci_platform_data *plat = dev->dev.platform_data;
        struct mmci_host *host;
        struct mmc_host *mmc;
        int ret;

        /* must have platform data */
        if (!plat) {
                ret = -EINVAL;
                goto out;
        }

        ret = amba_request_regions(dev, DRIVER_NAME);
        if (ret)
                goto out;

        mmc = mmc_alloc_host(sizeof(struct mmci_host), &dev->dev);
        if (!mmc) {
                ret = -ENOMEM;
                goto rel_regions;
        }

        host = mmc_priv(mmc);
        host->mmc = mmc;

        host->gpio_wp = -ENOSYS;
        host->gpio_cd = -ENOSYS;

        host->hw_designer = amba_manf(dev);
        host->hw_revision = amba_rev(dev);
        DBG(host, "designer ID = 0x%02x\n", host->hw_designer);
        DBG(host, "revision = 0x%01x\n", host->hw_revision);

        host->clk = clk_get(&dev->dev, NULL);
        if (IS_ERR(host->clk)) {
                ret = PTR_ERR(host->clk);
                host->clk = NULL;
                goto host_free;
        }

        ret = clk_enable(host->clk);
        if (ret)
                goto clk_free;

        host->plat = plat;
        host->mclk = clk_get_rate(host->clk);
        /*
         * According to the spec, mclk is max 100 MHz,
         * so we try to adjust the clock down to this,
         * (if possible).
         */
        if (host->mclk > 100000000) {
                ret = clk_set_rate(host->clk, 100000000);
                if (ret < 0)
                        goto clk_disable;
                host->mclk = clk_get_rate(host->clk);
                DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
        }
        host->base = ioremap(dev->res.start, resource_size(&dev->res));
        if (!host->base) {
                ret = -ENOMEM;
                goto clk_disable;
        }

        mmc->ops = &mmci_ops;
        mmc->f_min = (host->mclk + 511) / 512;
        mmc->f_max = min(host->mclk, fmax);
#ifdef CONFIG_REGULATOR
        /* If we're using the regulator framework, try to fetch a regulator */
        host->vcc = regulator_get(&dev->dev, "vmmc");
        if (IS_ERR(host->vcc))
                host->vcc = NULL;
        else {
                int mask = mmc_regulator_get_ocrmask(host->vcc);

                if (mask < 0)
                        dev_err(&dev->dev, "error getting OCR mask (%d)\n",
                                mask);
                else {
                        host->mmc->ocr_avail = (u32) mask;
                        if (plat->ocr_mask)
                                dev_warn(&dev->dev,
                                 "Provided ocr_mask/setpower will not be used "
                                 "(using regulator instead)\n");
                }
        }
#endif
        /* Fall back to platform data if no regulator is found */
        if (host->vcc == NULL)
                mmc->ocr_avail = plat->ocr_mask;
        mmc->caps = plat->capabilities;

        /*
         * We can do SGIO
         */
        mmc->max_hw_segs = 16;
        mmc->max_phys_segs = NR_SG;

        /*
         * Since we only have a 16-bit data length register, we must
         * ensure that we don't exceed 2^16-1 bytes in a single request.
         */
        mmc->max_req_size = 65535;

        /*
         * Set the maximum segment size.  Since we aren't doing DMA
         * (yet) we are only limited by the data length register.
         */
        mmc->max_seg_size = mmc->max_req_size;

        /*
         * Block size can be up to 2048 bytes, but must be a power of two.
         */
        mmc->max_blk_size = 2048;

        /*
         * No limit on the number of blocks transferred.
         */
        mmc->max_blk_count = mmc->max_req_size;

        spin_lock_init(&host->lock);

        writel(0, host->base + MMCIMASK0);
        writel(0, host->base + MMCIMASK1);
        writel(0xfff, host->base + MMCICLEAR);

        if (gpio_is_valid(plat->gpio_cd)) {
                ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
                if (ret == 0)
                        ret = gpio_direction_input(plat->gpio_cd);
                if (ret == 0)
                        host->gpio_cd = plat->gpio_cd;
                else if (ret != -ENOSYS)
                        goto err_gpio_cd;
        }
        if (gpio_is_valid(plat->gpio_wp)) {
                ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
                if (ret == 0)
                        ret = gpio_direction_input(plat->gpio_wp);
                if (ret == 0)
                        host->gpio_wp = plat->gpio_wp;
                else if (ret != -ENOSYS)
                        goto err_gpio_wp;
        }

        ret = request_irq(dev->irq[0], mmci_irq, IRQF_SHARED, DRIVER_NAME " (cmd)", host);
        if (ret)
                goto unmap;

        ret = request_irq(dev->irq[1], mmci_pio_irq, IRQF_SHARED, DRIVER_NAME " (pio)", host);
        if (ret)
                goto irq0_free;

        writel(MCI_IRQENABLE, host->base + MMCIMASK0);

        amba_set_drvdata(dev, mmc);
        host->oldstat = mmci_get_cd(host->mmc);

        mmc_add_host(mmc);

        printk(KERN_INFO "%s: MMCI rev %x cfg %02x at 0x%016llx irq %d,%d\n",
                mmc_hostname(mmc), amba_rev(dev), amba_config(dev),
                (unsigned long long)dev->res.start, dev->irq[0], dev->irq[1]);

        init_timer(&host->timer);
        host->timer.data = (unsigned long)host;
        host->timer.function = mmci_check_status;
        host->timer.expires = jiffies + HZ;
        add_timer(&host->timer);

        return 0;

 irq0_free:
        free_irq(dev->irq[0], host);
 unmap:
        if (host->gpio_wp != -ENOSYS)
                gpio_free(host->gpio_wp);
 err_gpio_wp:
        if (host->gpio_cd != -ENOSYS)
                gpio_free(host->gpio_cd);
 err_gpio_cd:
        iounmap(host->base);
 clk_disable:
        clk_disable(host->clk);
 clk_free:
        clk_put(host->clk);
 host_free:
        mmc_free_host(mmc);
 rel_regions:
        amba_release_regions(dev);
 out:
        return ret;
}

static int __devexit mmci_remove(struct amba_device *dev)
{
        struct mmc_host *mmc = amba_get_drvdata(dev);

        amba_set_drvdata(dev, NULL);

        if (mmc) {
                struct mmci_host *host = mmc_priv(mmc);

                del_timer_sync(&host->timer);

                mmc_remove_host(mmc);

                writel(0, host->base + MMCIMASK0);
                writel(0, host->base + MMCIMASK1);

                writel(0, host->base + MMCICOMMAND);
                writel(0, host->base + MMCIDATACTRL);

                free_irq(dev->irq[0], host);
                free_irq(dev->irq[1], host);

                if (host->gpio_wp != -ENOSYS)
                        gpio_free(host->gpio_wp);
                if (host->gpio_cd != -ENOSYS)
                        gpio_free(host->gpio_cd);

                iounmap(host->base);
                clk_disable(host->clk);
                clk_put(host->clk);

                if (regulator_is_enabled(host->vcc))
                        regulator_disable(host->vcc);
                regulator_put(host->vcc);

                mmc_free_host(mmc);

                amba_release_regions(dev);
        }

        return 0;
}

#ifdef CONFIG_PM
static int mmci_suspend(struct amba_device *dev, pm_message_t state)
{
        struct mmc_host *mmc = amba_get_drvdata(dev);
        int ret = 0;

        if (mmc) {
                struct mmci_host *host = mmc_priv(mmc);

                ret = mmc_suspend_host(mmc, state);
                if (ret == 0)
                        writel(0, host->base + MMCIMASK0);
        }

        return ret;
}

static int mmci_resume(struct amba_device *dev)
{
        struct mmc_host *mmc = amba_get_drvdata(dev);
        int ret = 0;

        if (mmc) {
                struct mmci_host *host = mmc_priv(mmc);

                writel(MCI_IRQENABLE, host->base + MMCIMASK0);

                ret = mmc_resume_host(mmc);
        }

        return ret;
}
#else
#define mmci_suspend    NULL
#define mmci_resume     NULL
#endif

static struct amba_id mmci_ids[] = {
        {
                .id     = 0x00041180,
                .mask   = 0x000fffff,
        },
        {
                .id     = 0x00041181,
                .mask   = 0x000fffff,
        },
        /* ST Micro variants */
        {
                .id     = 0x00180180,
                .mask   = 0x00ffffff,
        },
        {
                .id     = 0x00280180,
                .mask   = 0x00ffffff,
        },
        { 0, 0 },
};

static struct amba_driver mmci_driver = {
        .drv            = {
                .name   = DRIVER_NAME,
        },
        .probe          = mmci_probe,
        .remove         = __devexit_p(mmci_remove),
        .suspend        = mmci_suspend,
        .resume         = mmci_resume,
        .id_table       = mmci_ids,
};

static int __init mmci_init(void)
{
        return amba_driver_register(&mmci_driver);
}

static void __exit mmci_exit(void)
{
        amba_driver_unregister(&mmci_driver);
}

module_init(mmci_init);
module_exit(mmci_exit);
module_param(fmax, uint, 0444);

MODULE_DESCRIPTION("ARM PrimeCell PL180/181 Multimedia Card Interface driver");
MODULE_LICENSE("GPL");