drivers/mmc/host/sdhci-cns3xxx.c

   1 /*
   2  * SDHCI support for CNS3xxx SoC
   3  *
   4  * Copyright 2008 Cavium Networks
   5  * Copyright 2010 MontaVista Software, LLC.
   6  *
   7  * Authors: Scott Shu
   8  *          Anton Vorontsov <avorontsov@mvista.com>
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License version 2 as
  12  * published by the Free Software Foundation.
  13  */
  14
  15 #include <linux/delay.h>
  16 #include <linux/device.h>
  17 #include <linux/mmc/host.h>
  18 #include <linux/module.h>
  19 #include "sdhci-pltfm.h"
  20
  21 static unsigned int sdhci_cns3xxx_get_max_clk(struct sdhci_host *host)
  22 {
  23         return 150000000;
  24 }
  25
  26 static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock)
  27 {
  28         struct device *dev = mmc_dev(host->mmc);
  29         int div = 1;
  30         u16 clk;
  31         unsigned long timeout;
  32
  33         host->mmc->actual_clock = 0;
  34
  35         sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
  36
  37         if (clock == 0)
  38                 return;
  39
  40         while (host->max_clk / div > clock) {
  41                 /*
  42                  * On CNS3xxx divider grows linearly up to 4, and then
  43                  * exponentially up to 256.
  44                  */
  45                 if (div < 4)
  46                         div += 1;
  47                 else if (div < 256)
  48                         div *= 2;
  49                 else
  50                         break;
  51         }
  52
  53         dev_dbg(dev, "desired SD clock: %d, actual: %d\n",
  54                 clock, host->max_clk / div);
  55
  56         /* Divide by 3 is special. */
  57         if (div != 3)
  58                 div >>= 1;
  59
  60         clk = div << SDHCI_DIVIDER_SHIFT;
  61         clk |= SDHCI_CLOCK_INT_EN;
  62         sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
  63
  64         timeout = 20;
  65         while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
  66                         & SDHCI_CLOCK_INT_STABLE)) {
  67                 if (timeout == 0) {
  68                         dev_warn(dev, "clock is unstable");
  69                         break;
  70                 }
  71                 timeout--;
  72                 mdelay(1);
  73         }
  74
  75         clk |= SDHCI_CLOCK_CARD_EN;
  76         sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
  77 }
  78
  79 static const struct sdhci_ops sdhci_cns3xxx_ops = {
  80         .get_max_clock  = sdhci_cns3xxx_get_max_clk,
  81         .set_clock      = sdhci_cns3xxx_set_clock,
  82         .set_bus_width  = sdhci_set_bus_width,
  83         .reset          = sdhci_reset,
  84         .set_uhs_signaling = sdhci_set_uhs_signaling,
  85 };
  86
  87 static const struct sdhci_pltfm_data sdhci_cns3xxx_pdata = {
  88         .ops = &sdhci_cns3xxx_ops,
  89         .quirks = SDHCI_QUIRK_BROKEN_DMA |
  90                   SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
  91                   SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
  92                   SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
  93                   SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
  94 };
  95
  96 static int sdhci_cns3xxx_probe(struct platform_device *pdev)
  97 {
  98         return sdhci_pltfm_register(pdev, &sdhci_cns3xxx_pdata, 0);
  99 }
 100
 101 static struct platform_driver sdhci_cns3xxx_driver = {
 102         .driver         = {
 103                 .name   = "sdhci-cns3xxx",
 104                 .pm     = SDHCI_PLTFM_PMOPS,
 105         },
 106         .probe          = sdhci_cns3xxx_probe,
 107         .remove         = sdhci_pltfm_unregister,
 108 };
 109
 110 module_platform_driver(sdhci_cns3xxx_driver);
 111
 112 MODULE_DESCRIPTION("SDHCI driver for CNS3xxx");
 113 MODULE_AUTHOR("Scott Shu, "
 114               "Anton Vorontsov <avorontsov@mvista.com>");
 115 MODULE_LICENSE("GPL v2");