drivers/mmc/host/sdhci-of-esdhc.c

   1 /*
   2  * Freescale eSDHC controller driver.
   3  *
   4  * Copyright (c) 2007, 2010, 2012 Freescale Semiconductor, Inc.
   5  * Copyright (c) 2009 MontaVista Software, Inc.
   6  *
   7  * Authors: Xiaobo Xie <X.Xie@freescale.com>
   8  *          Anton Vorontsov <avorontsov@ru.mvista.com>
   9  *
  10  * This program is free software; you can redistribute it and/or modify
  11  * it under the terms of the GNU General Public License as published by
  12  * the Free Software Foundation; either version 2 of the License, or (at
  13  * your option) any later version.
  14  */
  15
  16 #include <linux/err.h>
  17 #include <linux/io.h>
  18 #include <linux/of.h>
  19 #include <linux/delay.h>
  20 #include <linux/module.h>
  21 #include <linux/mmc/host.h>
  22 #include "sdhci-pltfm.h"
  23 #include "sdhci-esdhc.h"
  24
  25 #define VENDOR_V_22     0x12
  26 #define VENDOR_V_23     0x13
  27 static u32 esdhc_readl(struct sdhci_host *host, int reg)
  28 {
  29         u32 ret;
  30
  31         ret = in_be32(host->ioaddr + reg);
  32         /*
  33          * The bit of ADMA flag in eSDHC is not compatible with standard
  34          * SDHC register, so set fake flag SDHCI_CAN_DO_ADMA2 when ADMA is
  35          * supported by eSDHC.
  36          * And for many FSL eSDHC controller, the reset value of field
  37          * SDHCI_CAN_DO_ADMA1 is one, but some of them can't support ADMA,
  38          * only these vendor version is greater than 2.2/0x12 support ADMA.
  39          * For FSL eSDHC, must aligned 4-byte, so use 0xFC to read the
  40          * the verdor version number, oxFE is SDHCI_HOST_VERSION.
  41          */
  42         if ((reg == SDHCI_CAPABILITIES) && (ret & SDHCI_CAN_DO_ADMA1)) {
  43                 u32 tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
  44                 tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
  45                 if (tmp > VENDOR_V_22)
  46                         ret |= SDHCI_CAN_DO_ADMA2;
  47         }
  48
  49         return ret;
  50 }
  51
  52 static u16 esdhc_readw(struct sdhci_host *host, int reg)
  53 {
  54         u16 ret;
  55         int base = reg & ~0x3;
  56         int shift = (reg & 0x2) * 8;
  57
  58         if (unlikely(reg == SDHCI_HOST_VERSION))
  59                 ret = in_be32(host->ioaddr + base) & 0xffff;
  60         else
  61                 ret = (in_be32(host->ioaddr + base) >> shift) & 0xffff;
  62         return ret;
  63 }
  64
  65 static u8 esdhc_readb(struct sdhci_host *host, int reg)
  66 {
  67         int base = reg & ~0x3;
  68         int shift = (reg & 0x3) * 8;
  69         u8 ret = (in_be32(host->ioaddr + base) >> shift) & 0xff;
  70
  71         /*
  72          * "DMA select" locates at offset 0x28 in SD specification, but on
  73          * P5020 or P3041, it locates at 0x29.
  74          */
  75         if (reg == SDHCI_HOST_CONTROL) {
  76                 u32 dma_bits;
  77
  78                 dma_bits = in_be32(host->ioaddr + reg);
  79                 /* DMA select is 22,23 bits in Protocol Control Register */
  80                 dma_bits = (dma_bits >> 5) & SDHCI_CTRL_DMA_MASK;
  81
  82                 /* fixup the result */
  83                 ret &= ~SDHCI_CTRL_DMA_MASK;
  84                 ret |= dma_bits;
  85         }
  86
  87         return ret;
  88 }
  89
  90 static void esdhc_writel(struct sdhci_host *host, u32 val, int reg)
  91 {
  92         /*
  93          * Enable IRQSTATEN[BGESEN] is just to set IRQSTAT[BGE]
  94          * when SYSCTL[RSTD]) is set for some special operations.
  95          * No any impact other operation.
  96          */
  97         if (reg == SDHCI_INT_ENABLE)
  98                 val |= SDHCI_INT_BLK_GAP;
  99         sdhci_be32bs_writel(host, val, reg);
 100 }
 101
 102 static void esdhc_writew(struct sdhci_host *host, u16 val, int reg)
 103 {
 104         if (reg == SDHCI_BLOCK_SIZE) {
 105                 /*
 106                  * Two last DMA bits are reserved, and first one is used for
 107                  * non-standard blksz of 4096 bytes that we don't support
 108                  * yet. So clear the DMA boundary bits.
 109                  */
 110                 val &= ~SDHCI_MAKE_BLKSZ(0x7, 0);
 111         }
 112         sdhci_be32bs_writew(host, val, reg);
 113 }
 114
 115 static void esdhc_writeb(struct sdhci_host *host, u8 val, int reg)
 116 {
 117         /*
 118          * "DMA select" location is offset 0x28 in SD specification, but on
 119          * P5020 or P3041, it's located at 0x29.
 120          */
 121         if (reg == SDHCI_HOST_CONTROL) {
 122                 u32 dma_bits;
 123
 124                 /*
 125                  * If host control register is not standard, exit
 126                  * this function
 127                  */
 128                 if (host->quirks2 & SDHCI_QUIRK2_BROKEN_HOST_CONTROL)
 129                         return;
 130
 131                 /* DMA select is 22,23 bits in Protocol Control Register */
 132                 dma_bits = (val & SDHCI_CTRL_DMA_MASK) << 5;
 133                 clrsetbits_be32(host->ioaddr + reg , SDHCI_CTRL_DMA_MASK << 5,
 134                         dma_bits);
 135                 val &= ~SDHCI_CTRL_DMA_MASK;
 136                 val |= in_be32(host->ioaddr + reg) & SDHCI_CTRL_DMA_MASK;
 137         }
 138
 139         /* Prevent SDHCI core from writing reserved bits (e.g. HISPD). */
 140         if (reg == SDHCI_HOST_CONTROL)
 141                 val &= ~ESDHC_HOST_CONTROL_RES;
 142         sdhci_be32bs_writeb(host, val, reg);
 143 }
 144
 145 /*
 146  * For Abort or Suspend after Stop at Block Gap, ignore the ADMA
 147  * error(IRQSTAT[ADMAE]) if both Transfer Complete(IRQSTAT[TC])
 148  * and Block Gap Event(IRQSTAT[BGE]) are also set.
 149  * For Continue, apply soft reset for data(SYSCTL[RSTD]);
 150  * and re-issue the entire read transaction from beginning.
 151  */
 152 static void esdhci_of_adma_workaround(struct sdhci_host *host, u32 intmask)
 153 {
 154         u32 tmp;
 155         bool applicable;
 156         dma_addr_t dmastart;
 157         dma_addr_t dmanow;
 158
 159         tmp = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
 160         tmp = (tmp & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
 161
 162         applicable = (intmask & SDHCI_INT_DATA_END) &&
 163                 (intmask & SDHCI_INT_BLK_GAP) &&
 164                 (tmp == VENDOR_V_23);
 165         if (!applicable)
 166                 return;
 167
 168         host->data->error = 0;
 169         dmastart = sg_dma_address(host->data->sg);
 170         dmanow = dmastart + host->data->bytes_xfered;
 171         /*
 172          * Force update to the next DMA block boundary.
 173          */
 174         dmanow = (dmanow & ~(SDHCI_DEFAULT_BOUNDARY_SIZE - 1)) +
 175                 SDHCI_DEFAULT_BOUNDARY_SIZE;
 176         host->data->bytes_xfered = dmanow - dmastart;
 177         sdhci_writel(host, dmanow, SDHCI_DMA_ADDRESS);
 178 }
 179
 180 static int esdhc_of_enable_dma(struct sdhci_host *host)
 181 {
 182         setbits32(host->ioaddr + ESDHC_DMA_SYSCTL, ESDHC_DMA_SNOOP);
 183         return 0;
 184 }
 185
 186 static unsigned int esdhc_of_get_max_clock(struct sdhci_host *host)
 187 {
 188         struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 189
 190         return pltfm_host->clock;
 191 }
 192
 193 static unsigned int esdhc_of_get_min_clock(struct sdhci_host *host)
 194 {
 195         struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
 196
 197         return pltfm_host->clock / 256 / 16;
 198 }
 199
 200 static void esdhc_of_set_clock(struct sdhci_host *host, unsigned int clock)
 201 {
 202         int pre_div = 2;
 203         int div = 1;
 204         u32 temp;
 205
 206         host->mmc->actual_clock = 0;
 207
 208         if (clock == 0)
 209                 return;
 210
 211         /* Workaround to reduce the clock frequency for p1010 esdhc */
 212         if (of_find_compatible_node(NULL, NULL, "fsl,p1010-esdhc")) {
 213                 if (clock > 20000000)
 214                         clock -= 5000000;
 215                 if (clock > 40000000)
 216                         clock -= 5000000;
 217         }
 218
 219         temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
 220         temp &= ~(ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
 221                 | ESDHC_CLOCK_MASK);
 222         sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
 223
 224         while (host->max_clk / pre_div / 16 > clock && pre_div < 256)
 225                 pre_div *= 2;
 226
 227         while (host->max_clk / pre_div / div > clock && div < 16)
 228                 div++;
 229
 230         dev_dbg(mmc_dev(host->mmc), "desired SD clock: %d, actual: %d\n",
 231                 clock, host->max_clk / pre_div / div);
 232
 233         pre_div >>= 1;
 234         div--;
 235
 236         temp = sdhci_readl(host, ESDHC_SYSTEM_CONTROL);
 237         temp |= (ESDHC_CLOCK_IPGEN | ESDHC_CLOCK_HCKEN | ESDHC_CLOCK_PEREN
 238                 | (div << ESDHC_DIVIDER_SHIFT)
 239                 | (pre_div << ESDHC_PREDIV_SHIFT));
 240         sdhci_writel(host, temp, ESDHC_SYSTEM_CONTROL);
 241         mdelay(1);
 242 }
 243
 244 static void esdhc_of_platform_init(struct sdhci_host *host)
 245 {
 246         u32 vvn;
 247
 248         vvn = in_be32(host->ioaddr + SDHCI_SLOT_INT_STATUS);
 249         vvn = (vvn & SDHCI_VENDOR_VER_MASK) >> SDHCI_VENDOR_VER_SHIFT;
 250         if (vvn == VENDOR_V_22)
 251                 host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23;
 252
 253         if (vvn > VENDOR_V_22)
 254                 host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ;
 255 }
 256
 257 static void esdhc_pltfm_set_bus_width(struct sdhci_host *host, int width)
 258 {
 259         u32 ctrl;
 260
 261         switch (width) {
 262         case MMC_BUS_WIDTH_8:
 263                 ctrl = ESDHC_CTRL_8BITBUS;
 264                 break;
 265
 266         case MMC_BUS_WIDTH_4:
 267                 ctrl = ESDHC_CTRL_4BITBUS;
 268                 break;
 269
 270         default:
 271                 ctrl = 0;
 272                 break;
 273         }
 274
 275         clrsetbits_be32(host->ioaddr + SDHCI_HOST_CONTROL,
 276                         ESDHC_CTRL_BUSWIDTH_MASK, ctrl);
 277 }
 278
 279 static void esdhc_reset(struct sdhci_host *host, u8 mask)
 280 {
 281         sdhci_reset(host, mask);
 282
 283         sdhci_writel(host, host->ier, SDHCI_INT_ENABLE);
 284         sdhci_writel(host, host->ier, SDHCI_SIGNAL_ENABLE);
 285 }
 286
 287 static const struct sdhci_ops sdhci_esdhc_ops = {
 288         .read_l = esdhc_readl,
 289         .read_w = esdhc_readw,
 290         .read_b = esdhc_readb,
 291         .write_l = esdhc_writel,
 292         .write_w = esdhc_writew,
 293         .write_b = esdhc_writeb,
 294         .set_clock = esdhc_of_set_clock,
 295         .enable_dma = esdhc_of_enable_dma,
 296         .get_max_clock = esdhc_of_get_max_clock,
 297         .get_min_clock = esdhc_of_get_min_clock,
 298         .platform_init = esdhc_of_platform_init,
 299         .adma_workaround = esdhci_of_adma_workaround,
 300         .set_bus_width = esdhc_pltfm_set_bus_width,
 301         .reset = esdhc_reset,
 302         .set_uhs_signaling = sdhci_set_uhs_signaling,
 303 };
 304
 305 #ifdef CONFIG_PM
 306
 307 static u32 esdhc_proctl;
 308 static int esdhc_of_suspend(struct device *dev)
 309 {
 310         struct sdhci_host *host = dev_get_drvdata(dev);
 311
 312         esdhc_proctl = sdhci_be32bs_readl(host, SDHCI_HOST_CONTROL);
 313
 314         return sdhci_suspend_host(host);
 315 }
 316
 317 static int esdhc_of_resume(struct device *dev)
 318 {
 319         struct sdhci_host *host = dev_get_drvdata(dev);
 320         int ret = sdhci_resume_host(host);
 321
 322         if (ret == 0) {
 323                 /* Isn't this already done by sdhci_resume_host() ? --rmk */
 324                 esdhc_of_enable_dma(host);
 325                 sdhci_be32bs_writel(host, esdhc_proctl, SDHCI_HOST_CONTROL);
 326         }
 327
 328         return ret;
 329 }
 330
 331 static const struct dev_pm_ops esdhc_pmops = {
 332         .suspend        = esdhc_of_suspend,
 333         .resume         = esdhc_of_resume,
 334 };
 335 #define ESDHC_PMOPS (&esdhc_pmops)
 336 #else
 337 #define ESDHC_PMOPS NULL
 338 #endif
 339
 340 static const struct sdhci_pltfm_data sdhci_esdhc_pdata = {
 341         /*
 342          * card detection could be handled via GPIO
 343          * eSDHC cannot support End Attribute in NOP ADMA descriptor
 344          */
 345         .quirks = ESDHC_DEFAULT_QUIRKS | SDHCI_QUIRK_BROKEN_CARD_DETECTION
 346                 | SDHCI_QUIRK_NO_CARD_NO_RESET
 347                 | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
 348         .ops = &sdhci_esdhc_ops,
 349 };
 350
 351 static int sdhci_esdhc_probe(struct platform_device *pdev)
 352 {
 353         struct sdhci_host *host;
 354         struct device_node *np;
 355         int ret;
 356
 357         host = sdhci_pltfm_init(pdev, &sdhci_esdhc_pdata, 0);
 358         if (IS_ERR(host))
 359                 return PTR_ERR(host);
 360
 361         sdhci_get_of_property(pdev);
 362
 363         np = pdev->dev.of_node;
 364         if (of_device_is_compatible(np, "fsl,p2020-esdhc")) {
 365                 /*
 366                  * Freescale messed up with P2020 as it has a non-standard
 367                  * host control register
 368                  */
 369                 host->quirks2 |= SDHCI_QUIRK2_BROKEN_HOST_CONTROL;
 370         }
 371
 372         /* call to generic mmc_of_parse to support additional capabilities */
 373         ret = mmc_of_parse(host->mmc);
 374         if (ret)
 375                 goto err;
 376
 377         mmc_of_parse_voltage(np, &host->ocr_mask);
 378
 379         ret = sdhci_add_host(host);
 380         if (ret)
 381                 goto err;
 382
 383         return 0;
 384  err:
 385         sdhci_pltfm_free(pdev);
 386         return ret;
 387 }
 388
 389 static const struct of_device_id sdhci_esdhc_of_match[] = {
 390         { .compatible = "fsl,mpc8379-esdhc" },
 391         { .compatible = "fsl,mpc8536-esdhc" },
 392         { .compatible = "fsl,esdhc" },
 393         { }
 394 };
 395 MODULE_DEVICE_TABLE(of, sdhci_esdhc_of_match);
 396
 397 static struct platform_driver sdhci_esdhc_driver = {
 398         .driver = {
 399                 .name = "sdhci-esdhc",
 400                 .of_match_table = sdhci_esdhc_of_match,
 401                 .pm = ESDHC_PMOPS,
 402         },
 403         .probe = sdhci_esdhc_probe,
 404         .remove = sdhci_pltfm_unregister,
 405 };
 406
 407 module_platform_driver(sdhci_esdhc_driver);
 408
 409 MODULE_DESCRIPTION("SDHCI OF driver for Freescale MPC eSDHC");
 410 MODULE_AUTHOR("Xiaobo Xie <X.Xie@freescale.com>, "
 411               "Anton Vorontsov <avorontsov@ru.mvista.com>");
 412 MODULE_LICENSE("GPL v2");