drivers/mtd/devices/Kconfig

   1 menu "Self-contained MTD device drivers"
   2         depends on MTD!=n
   3         depends on HAS_IOMEM
   4
   5 config MTD_PMC551
   6         tristate "Ramix PMC551 PCI Mezzanine RAM card support"
   7         depends on PCI
   8         ---help---
   9           This provides a MTD device driver for the Ramix PMC551 RAM PCI card
  10           from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>.
  11           These devices come in memory configurations from 32M - 1G.  If you
  12           have one, you probably want to enable this.
  13
  14           If this driver is compiled as a module you get the ability to select
  15           the size of the aperture window pointing into the devices memory.
  16           What this means is that if you have a 1G card, normally the kernel
  17           will use a 1G memory map as its view of the device.  As a module,
  18           you can select a 1M window into the memory and the driver will
  19           "slide" the window around the PMC551's memory.  This was
  20           particularly useful on the 2.2 kernels on PPC architectures as there
  21           was limited kernel space to deal with.
  22
  23 config MTD_PMC551_BUGFIX
  24         bool "PMC551 256M DRAM Bugfix"
  25         depends on MTD_PMC551
  26         help
  27           Some of Ramix's PMC551 boards with 256M configurations have invalid
  28           column and row mux values.  This option will fix them, but will
  29           break other memory configurations.  If unsure say N.
  30
  31 config MTD_PMC551_DEBUG
  32         bool "PMC551 Debugging"
  33         depends on MTD_PMC551
  34         help
  35           This option makes the PMC551 more verbose during its operation and
  36           is only really useful if you are developing on this driver or
  37           suspect a possible hardware or driver bug.  If unsure say N.
  38
  39 config MTD_MS02NV
  40         tristate "DEC MS02-NV NVRAM module support"
  41         depends on MACH_DECSTATION
  42         help
  43           This is an MTD driver for the DEC's MS02-NV (54-20948-01) battery
  44           backed-up NVRAM module.  The module was originally meant as an NFS
  45           accelerator.  Say Y here if you have a DECstation 5000/2x0 or a
  46           DECsystem 5900 equipped with such a module.
  47
  48           If you want to compile this driver as a module ( = code which can be
  49           inserted in and removed from the running kernel whenever you want),
  50           say M here and read <file:Documentation/kbuild/modules.txt>.
  51           The module will be called ms02-nv.
  52
  53 config MTD_DATAFLASH
  54         tristate "Support for AT45xxx DataFlash"
  55         depends on SPI_MASTER
  56         help
  57           This enables access to AT45xxx DataFlash chips, using SPI.
  58           Sometimes DataFlash chips are packaged inside MMC-format
  59           cards; at this writing, the MMC stack won't handle those.
  60
  61 config MTD_DATAFLASH_WRITE_VERIFY
  62         bool "Verify DataFlash page writes"
  63         depends on MTD_DATAFLASH
  64         help
  65           This adds an extra check when data is written to the flash.
  66           It may help if you are verifying chip setup (timings etc) on
  67           your board.  There is a rare possibility that even though the
  68           device thinks the write was successful, a bit could have been
  69           flipped accidentally due to device wear or something else.
  70
  71 config MTD_DATAFLASH_OTP
  72         bool "DataFlash OTP support (Security Register)"
  73         depends on MTD_DATAFLASH
  74         help
  75           Newer DataFlash chips (revisions C and D) support 128 bytes of
  76           one-time-programmable (OTP) data.  The first half may be written
  77           (once) with up to 64 bytes of data, such as a serial number or
  78           other key product data.  The second half is programmed with a
  79           unique-to-each-chip bit pattern at the factory.
  80
  81 config MTD_M25P80
  82         tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
  83         depends on SPI_MASTER
  84         help
  85           This enables access to most modern SPI flash chips, used for
  86           program and data storage.   Series supported include Atmel AT26DF,
  87           Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X.  Other chips
  88           are supported as well.  See the driver source for the current list,
  89           or to add other chips.
  90
  91           Note that the original DataFlash chips (AT45 series, not AT26DF),
  92           need an entirely different driver.
  93
  94           Set up your spi devices with the right board-specific platform data,
  95           if you want to specify device partitioning or to use a device which
  96           doesn't support the JEDEC ID instruction.
  97
  98 config M25PXX_USE_FAST_READ
  99         bool "Use FAST_READ OPCode allowing SPI CLK >= 50MHz"
 100         depends on MTD_M25P80
 101         default y
 102         help
 103           This option enables FAST_READ access supported by ST M25Pxx.
 104
 105 config MTD_SPEAR_SMI
 106         tristate "SPEAR MTD NOR Support through SMI controller"
 107         depends on PLAT_SPEAR
 108         default y
 109         help
 110           This enable SNOR support on SPEAR platforms using SMI controller
 111
 112 config MTD_SST25L
 113         tristate "Support SST25L (non JEDEC) SPI Flash chips"
 114         depends on SPI_MASTER
 115         help
 116           This enables access to the non JEDEC SST25L SPI flash chips, used
 117           for program and data storage.
 118
 119           Set up your spi devices with the right board-specific platform data,
 120           if you want to specify device partitioning.
 121
 122 config MTD_BCM47XXSFLASH
 123         tristate "R/O support for serial flash on BCMA bus"
 124         depends on BCMA_SFLASH
 125         help
 126           BCMA bus can have various flash memories attached, they are
 127           registered by bcma as platform devices. This enables driver for
 128           serial flash memories (only read-only mode is implemented).
 129
 130 config MTD_SLRAM
 131         tristate "Uncached system RAM"
 132         help
 133           If your CPU cannot cache all of the physical memory in your machine,
 134           you can still use it for storage or swap by using this driver to
 135           present it to the system as a Memory Technology Device.
 136
 137 config MTD_PHRAM
 138         tristate "Physical system RAM"
 139         help
 140           This is a re-implementation of the slram driver above.
 141
 142           Use this driver to access physical memory that the kernel proper
 143           doesn't have access to, memory beyond the mem=xxx limit, nvram,
 144           memory on the video card, etc...
 145
 146 config MTD_LART
 147         tristate "28F160xx flash driver for LART"
 148         depends on SA1100_LART
 149         help
 150           This enables the flash driver for LART. Please note that you do
 151           not need any mapping/chip driver for LART. This one does it all
 152           for you, so go disable all of those if you enabled some of them (:
 153
 154 config MTD_MTDRAM
 155         tristate "Test driver using RAM"
 156         help
 157           This enables a test MTD device driver which uses vmalloc() to
 158           provide storage.  You probably want to say 'N' unless you're
 159           testing stuff.
 160
 161 config MTDRAM_TOTAL_SIZE
 162         int "MTDRAM device size in KiB"
 163         depends on MTD_MTDRAM
 164         default "4096"
 165         help
 166           This allows you to configure the total size of the MTD device
 167           emulated by the MTDRAM driver.  If the MTDRAM driver is built
 168           as a module, it is also possible to specify this as a parameter when
 169           loading the module.
 170
 171 config MTDRAM_ERASE_SIZE
 172         int "MTDRAM erase block size in KiB"
 173         depends on MTD_MTDRAM
 174         default "128"
 175         help
 176           This allows you to configure the size of the erase blocks in the
 177           device emulated by the MTDRAM driver.  If the MTDRAM driver is built
 178           as a module, it is also possible to specify this as a parameter when
 179           loading the module.
 180
 181 #If not a module (I don't want to test it as a module)
 182 config MTDRAM_ABS_POS
 183         hex "SRAM Hexadecimal Absolute position or 0"
 184         depends on MTD_MTDRAM=y
 185         default "0"
 186         help
 187           If you have system RAM accessible by the CPU but not used by Linux
 188           in normal operation, you can give the physical address at which the
 189           available RAM starts, and the MTDRAM driver will use it instead of
 190           allocating space from Linux's available memory. Otherwise, leave
 191           this set to zero. Most people will want to leave this as zero.
 192
 193 config MTD_BLOCK2MTD
 194         tristate "MTD using block device"
 195         depends on BLOCK
 196         help
 197           This driver allows a block device to appear as an MTD. It would
 198           generally be used in the following cases:
 199
 200           Using Compact Flash as an MTD, these usually present themselves to
 201           the system as an ATA drive.
 202           Testing MTD users (eg JFFS2) on large media and media that might
 203           be removed during a write (using the floppy drive).
 204
 205 comment "Disk-On-Chip Device Drivers"
 206
 207 config MTD_DOCG3
 208         tristate "M-Systems Disk-On-Chip G3"
 209         select BCH
 210         select BCH_CONST_PARAMS
 211         select BITREVERSE
 212         ---help---
 213           This provides an MTD device driver for the M-Systems DiskOnChip
 214           G3 devices.
 215
 216           The driver provides access to G3 DiskOnChip, distributed by
 217           M-Systems and now Sandisk. The support is very experimental,
 218           and doesn't give access to any write operations.
 219
 220 if MTD_DOCG3
 221 config BCH_CONST_M
 222         default 14
 223 config BCH_CONST_T
 224         default 4
 225 endif
 226
 227 endmenu