drivers/mtd/devices/Kconfig

   1 menu "Self-contained MTD device drivers"
   2         depends on MTD!=n
   3         depends on HAS_IOMEM
   4
   5 config MTD_PMC551
   6         tristate "Ramix PMC551 PCI Mezzanine RAM card support"
   7         depends on PCI
   8         ---help---
   9           This provides a MTD device driver for the Ramix PMC551 RAM PCI card
  10           from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>.
  11           These devices come in memory configurations from 32M - 1G.  If you
  12           have one, you probably want to enable this.
  13
  14           If this driver is compiled as a module you get the ability to select
  15           the size of the aperture window pointing into the devices memory.
  16           What this means is that if you have a 1G card, normally the kernel
  17           will use a 1G memory map as its view of the device.  As a module,
  18           you can select a 1M window into the memory and the driver will
  19           "slide" the window around the PMC551's memory.  This was
  20           particularly useful on the 2.2 kernels on PPC architectures as there
  21           was limited kernel space to deal with.
  22
  23 config MTD_PMC551_BUGFIX
  24         bool "PMC551 256M DRAM Bugfix"
  25         depends on MTD_PMC551
  26         help
  27           Some of Ramix's PMC551 boards with 256M configurations have invalid
  28           column and row mux values.  This option will fix them, but will
  29           break other memory configurations.  If unsure say N.
  30
  31 config MTD_PMC551_DEBUG
  32         bool "PMC551 Debugging"
  33         depends on MTD_PMC551
  34         help
  35           This option makes the PMC551 more verbose during its operation and
  36           is only really useful if you are developing on this driver or
  37           suspect a possible hardware or driver bug.  If unsure say N.
  38
  39 config MTD_MS02NV
  40         tristate "DEC MS02-NV NVRAM module support"
  41         depends on MACH_DECSTATION
  42         help
  43           This is an MTD driver for the DEC's MS02-NV (54-20948-01) battery
  44           backed-up NVRAM module.  The module was originally meant as an NFS
  45           accelerator.  Say Y here if you have a DECstation 5000/2x0 or a
  46           DECsystem 5900 equipped with such a module.
  47
  48           If you want to compile this driver as a module ( = code which can be
  49           inserted in and removed from the running kernel whenever you want),
  50           say M here and read <file:Documentation/kbuild/modules.txt>.
  51           The module will be called ms02-nv.
  52
  53 config MTD_DATAFLASH
  54         tristate "Support for AT45xxx DataFlash"
  55         depends on SPI_MASTER
  56         help
  57           This enables access to AT45xxx DataFlash chips, using SPI.
  58           Sometimes DataFlash chips are packaged inside MMC-format
  59           cards; at this writing, the MMC stack won't handle those.
  60
  61 config MTD_DATAFLASH_WRITE_VERIFY
  62         bool "Verify DataFlash page writes"
  63         depends on MTD_DATAFLASH
  64         help
  65           This adds an extra check when data is written to the flash.
  66           It may help if you are verifying chip setup (timings etc) on
  67           your board.  There is a rare possibility that even though the
  68           device thinks the write was successful, a bit could have been
  69           flipped accidentally due to device wear or something else.
  70
  71 config MTD_DATAFLASH_OTP
  72         bool "DataFlash OTP support (Security Register)"
  73         depends on MTD_DATAFLASH
  74         help
  75           Newer DataFlash chips (revisions C and D) support 128 bytes of
  76           one-time-programmable (OTP) data.  The first half may be written
  77           (once) with up to 64 bytes of data, such as a serial number or
  78           other key product data.  The second half is programmed with a
  79           unique-to-each-chip bit pattern at the factory.
  80
  81 config MTD_M25P80
  82         tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)"
  83         depends on SPI_MASTER && MTD_SPI_NOR
  84         help
  85           This enables access to most modern SPI flash chips, used for
  86           program and data storage.   Series supported include Atmel AT26DF,
  87           Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X.  Other chips
  88           are supported as well.  See the driver source for the current list,
  89           or to add other chips.
  90
  91           Note that the original DataFlash chips (AT45 series, not AT26DF),
  92           need an entirely different driver.
  93
  94           Set up your spi devices with the right board-specific platform data,
  95           if you want to specify device partitioning or to use a device which
  96           doesn't support the JEDEC ID instruction.
  97
  98 config MTD_SPEAR_SMI
  99         tristate "SPEAR MTD NOR Support through SMI controller"
 100         depends on PLAT_SPEAR
 101         default y
 102         help
 103           This enable SNOR support on SPEAR platforms using SMI controller
 104
 105 config MTD_SST25L
 106         tristate "Support SST25L (non JEDEC) SPI Flash chips"
 107         depends on SPI_MASTER
 108         help
 109           This enables access to the non JEDEC SST25L SPI flash chips, used
 110           for program and data storage.
 111
 112           Set up your spi devices with the right board-specific platform data,
 113           if you want to specify device partitioning.
 114
 115 config MTD_BCM47XXSFLASH
 116         tristate "R/O support for serial flash on BCMA bus"
 117         depends on BCMA_SFLASH
 118         help
 119           BCMA bus can have various flash memories attached, they are
 120           registered by bcma as platform devices. This enables driver for
 121           serial flash memories (only read-only mode is implemented).
 122
 123 config MTD_SLRAM
 124         tristate "Uncached system RAM"
 125         help
 126           If your CPU cannot cache all of the physical memory in your machine,
 127           you can still use it for storage or swap by using this driver to
 128           present it to the system as a Memory Technology Device.
 129
 130 config MTD_PHRAM
 131         tristate "Physical system RAM"
 132         help
 133           This is a re-implementation of the slram driver above.
 134
 135           Use this driver to access physical memory that the kernel proper
 136           doesn't have access to, memory beyond the mem=xxx limit, nvram,
 137           memory on the video card, etc...
 138
 139 config MTD_LART
 140         tristate "28F160xx flash driver for LART"
 141         depends on SA1100_LART
 142         help
 143           This enables the flash driver for LART. Please note that you do
 144           not need any mapping/chip driver for LART. This one does it all
 145           for you, so go disable all of those if you enabled some of them (:
 146
 147 config MTD_MTDRAM
 148         tristate "Test driver using RAM"
 149         help
 150           This enables a test MTD device driver which uses vmalloc() to
 151           provide storage.  You probably want to say 'N' unless you're
 152           testing stuff.
 153
 154 config MTDRAM_TOTAL_SIZE
 155         int "MTDRAM device size in KiB"
 156         depends on MTD_MTDRAM
 157         default "4096"
 158         help
 159           This allows you to configure the total size of the MTD device
 160           emulated by the MTDRAM driver.  If the MTDRAM driver is built
 161           as a module, it is also possible to specify this as a parameter when
 162           loading the module.
 163
 164 config MTDRAM_ERASE_SIZE
 165         int "MTDRAM erase block size in KiB"
 166         depends on MTD_MTDRAM
 167         default "128"
 168         help
 169           This allows you to configure the size of the erase blocks in the
 170           device emulated by the MTDRAM driver.  If the MTDRAM driver is built
 171           as a module, it is also possible to specify this as a parameter when
 172           loading the module.
 173
 174 #If not a module (I don't want to test it as a module)
 175 config MTDRAM_ABS_POS
 176         hex "SRAM Hexadecimal Absolute position or 0"
 177         depends on MTD_MTDRAM=y
 178         default "0"
 179         help
 180           If you have system RAM accessible by the CPU but not used by Linux
 181           in normal operation, you can give the physical address at which the
 182           available RAM starts, and the MTDRAM driver will use it instead of
 183           allocating space from Linux's available memory. Otherwise, leave
 184           this set to zero. Most people will want to leave this as zero.
 185
 186 config MTD_BLOCK2MTD
 187         tristate "MTD using block device"
 188         depends on BLOCK
 189         help
 190           This driver allows a block device to appear as an MTD. It would
 191           generally be used in the following cases:
 192
 193           Using Compact Flash as an MTD, these usually present themselves to
 194           the system as an ATA drive.
 195           Testing MTD users (eg JFFS2) on large media and media that might
 196           be removed during a write (using the floppy drive).
 197
 198 config MTD_POWERNV_FLASH
 199         tristate "powernv flash MTD driver"
 200         depends on PPC_POWERNV
 201         help
 202           This provides an MTD device to access flash on powernv OPAL
 203           platforms from Linux. This device abstracts away the
 204           firmware interface for flash access.
 205
 206 comment "Disk-On-Chip Device Drivers"
 207
 208 config MTD_DOCG3
 209         tristate "M-Systems Disk-On-Chip G3"
 210         select BCH
 211         select BCH_CONST_PARAMS
 212         select BITREVERSE
 213         ---help---
 214           This provides an MTD device driver for the M-Systems DiskOnChip
 215           G3 devices.
 216
 217           The driver provides access to G3 DiskOnChip, distributed by
 218           M-Systems and now Sandisk. The support is very experimental,
 219           and doesn't give access to any write operations.
 220
 221 config MTD_ST_SPI_FSM
 222         tristate "ST Microelectronics SPI FSM Serial Flash Controller"
 223         depends on ARCH_STI
 224         help
 225           This provides an MTD device driver for the ST Microelectronics
 226           SPI Fast Sequence Mode (FSM) Serial Flash Controller and support
 227           for a subset of connected Serial Flash devices.
 228
 229 if MTD_DOCG3
 230 config BCH_CONST_M
 231         default 14
 232 config BCH_CONST_T
 233         default 4
 234 endif
 235
 236 endmenu