projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
mtd: replace DEBUG() with pr_debug()
[deliverable/linux.git] / drivers / mtd / devices / doc2000.c
1
2 /*
3 * Linux driver for Disk-On-Chip 2000 and Millennium
4 * (c) 1999 Machine Vision Holdings, Inc.
5 * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org>
6 */
7
8 #include <linux/kernel.h>
9 #include <linux/module.h>
10 #include <asm/errno.h>
11 #include <asm/io.h>
12 #include <asm/uaccess.h>
13 #include <linux/delay.h>
14 #include <linux/slab.h>
15 #include <linux/sched.h>
16 #include <linux/init.h>
17 #include <linux/types.h>
18 #include <linux/bitops.h>
19 #include <linux/mutex.h>
20
21 #include <linux/mtd/mtd.h>
22 #include <linux/mtd/nand.h>
23 #include <linux/mtd/doc2000.h>
24
25 #define DOC_SUPPORT_2000
26 #define DOC_SUPPORT_2000TSOP
27 #define DOC_SUPPORT_MILLENNIUM
28
29 #ifdef DOC_SUPPORT_2000
30 #define DoC_is_2000(doc) (doc->ChipID == DOC_ChipID_Doc2k)
31 #else
32 #define DoC_is_2000(doc) (0)
33 #endif
34
35 #if defined(DOC_SUPPORT_2000TSOP) || defined(DOC_SUPPORT_MILLENNIUM)
36 #define DoC_is_Millennium(doc) (doc->ChipID == DOC_ChipID_DocMil)
37 #else
38 #define DoC_is_Millennium(doc) (0)
39 #endif
40
41 /* #define ECC_DEBUG */
42
43 /* I have no idea why some DoC chips can not use memcpy_from|to_io().
44 * This may be due to the different revisions of the ASIC controller built-in or
45 * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment
46 * this:
47 #undef USE_MEMCPY
48 */
49
50 static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
51 size_t *retlen, u_char *buf);
52 static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
53 size_t *retlen, const u_char *buf);
54 static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
55 struct mtd_oob_ops *ops);
56 static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
57 struct mtd_oob_ops *ops);
58 static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len,
59 size_t *retlen, const u_char *buf);
60 static int doc_erase (struct mtd_info *mtd, struct erase_info *instr);
61
62 static struct mtd_info *doc2klist = NULL;
63
64 /* Perform the required delay cycles by reading from the appropriate register */
65 static void DoC_Delay(struct DiskOnChip *doc, unsigned short cycles)
66 {
67 volatile char dummy;
68 int i;
69
70 for (i = 0; i < cycles; i++) {
71 if (DoC_is_Millennium(doc))
72 dummy = ReadDOC(doc->virtadr, NOP);
73 else
74 dummy = ReadDOC(doc->virtadr, DOCStatus);
75 }
76
77 }
78
79 /* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
80 static int _DoC_WaitReady(struct DiskOnChip *doc)
81 {
82 void __iomem *docptr = doc->virtadr;
83 unsigned long timeo = jiffies + (HZ * 10);
84
85 pr_debug("_DoC_WaitReady called for out-of-line wait\n");
86
87 /* Out-of-line routine to wait for chip response */
88 while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
89 /* issue 2 read from NOP register after reading from CDSNControl register
90 see Software Requirement 11.4 item 2. */
91 DoC_Delay(doc, 2);
92
93 if (time_after(jiffies, timeo)) {
94 pr_debug("_DoC_WaitReady timed out.\n");
95 return -EIO;
96 }
97 udelay(1);
98 cond_resched();
99 }
100
101 return 0;
102 }
103
104 static inline int DoC_WaitReady(struct DiskOnChip *doc)
105 {
106 void __iomem *docptr = doc->virtadr;
107
108 /* This is inline, to optimise the common case, where it's ready instantly */
109 int ret = 0;
110
111 /* 4 read form NOP register should be issued in prior to the read from CDSNControl
112 see Software Requirement 11.4 item 2. */
113 DoC_Delay(doc, 4);
114
115 if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B))
116 /* Call the out-of-line routine to wait */
117 ret = _DoC_WaitReady(doc);
118
119 /* issue 2 read from NOP register after reading from CDSNControl register
120 see Software Requirement 11.4 item 2. */
121 DoC_Delay(doc, 2);
122
123 return ret;
124 }
125
126 /* DoC_Command: Send a flash command to the flash chip through the CDSN Slow IO register to
127 bypass the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
128 required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
129
130 static int DoC_Command(struct DiskOnChip *doc, unsigned char command,
131 unsigned char xtraflags)
132 {
133 void __iomem *docptr = doc->virtadr;
134
135 if (DoC_is_2000(doc))
136 xtraflags |= CDSN_CTRL_FLASH_IO;
137
138 /* Assert the CLE (Command Latch Enable) line to the flash chip */
139 WriteDOC(xtraflags | CDSN_CTRL_CLE | CDSN_CTRL_CE, docptr, CDSNControl);
140 DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */
141
142 if (DoC_is_Millennium(doc))
143 WriteDOC(command, docptr, CDSNSlowIO);
144
145 /* Send the command */
146 WriteDOC_(command, docptr, doc->ioreg);
147 if (DoC_is_Millennium(doc))
148 WriteDOC(command, docptr, WritePipeTerm);
149
150 /* Lower the CLE line */
151 WriteDOC(xtraflags | CDSN_CTRL_CE, docptr, CDSNControl);
152 DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */
153
154 /* Wait for the chip to respond - Software requirement 11.4.1 (extended for any command) */
155 return DoC_WaitReady(doc);
156 }
157
158 /* DoC_Address: Set the current address for the flash chip through the CDSN Slow IO register to
159 bypass the internal pipeline. Each of 4 delay cycles (read from the NOP register) is
160 required after writing to CDSN Control register, see Software Requirement 11.4 item 3. */
161
162 static int DoC_Address(struct DiskOnChip *doc, int numbytes, unsigned long ofs,
163 unsigned char xtraflags1, unsigned char xtraflags2)
164 {
165 int i;
166 void __iomem *docptr = doc->virtadr;
167
168 if (DoC_is_2000(doc))
169 xtraflags1 |= CDSN_CTRL_FLASH_IO;
170
171 /* Assert the ALE (Address Latch Enable) line to the flash chip */
172 WriteDOC(xtraflags1 | CDSN_CTRL_ALE | CDSN_CTRL_CE, docptr, CDSNControl);
173
174 DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */
175
176 /* Send the address */
177 /* Devices with 256-byte page are addressed as:
178 Column (bits 0-7), Page (bits 8-15, 16-23, 24-31)
179 * there is no device on the market with page256
180 and more than 24 bits.
181 Devices with 512-byte page are addressed as:
182 Column (bits 0-7), Page (bits 9-16, 17-24, 25-31)
183 * 25-31 is sent only if the chip support it.
184 * bit 8 changes the read command to be sent
185 (NAND_CMD_READ0 or NAND_CMD_READ1).
186 */
187
188 if (numbytes == ADDR_COLUMN || numbytes == ADDR_COLUMN_PAGE) {
189 if (DoC_is_Millennium(doc))
190 WriteDOC(ofs & 0xff, docptr, CDSNSlowIO);
191 WriteDOC_(ofs & 0xff, docptr, doc->ioreg);
192 }
193
194 if (doc->page256) {
195 ofs = ofs >> 8;
196 } else {
197 ofs = ofs >> 9;
198 }
199
200 if (numbytes == ADDR_PAGE || numbytes == ADDR_COLUMN_PAGE) {
201 for (i = 0; i < doc->pageadrlen; i++, ofs = ofs >> 8) {
202 if (DoC_is_Millennium(doc))
203 WriteDOC(ofs & 0xff, docptr, CDSNSlowIO);
204 WriteDOC_(ofs & 0xff, docptr, doc->ioreg);
205 }
206 }
207
208 if (DoC_is_Millennium(doc))
209 WriteDOC(ofs & 0xff, docptr, WritePipeTerm);
210
211 DoC_Delay(doc, 2); /* Needed for some slow flash chips. mf. */
212
213 /* FIXME: The SlowIO's for millennium could be replaced by
214 a single WritePipeTerm here. mf. */
215
216 /* Lower the ALE line */
217 WriteDOC(xtraflags1 | xtraflags2 | CDSN_CTRL_CE, docptr,
218 CDSNControl);
219
220 DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */
221
222 /* Wait for the chip to respond - Software requirement 11.4.1 */
223 return DoC_WaitReady(doc);
224 }
225
226 /* Read a buffer from DoC, taking care of Millennium odditys */
227 static void DoC_ReadBuf(struct DiskOnChip *doc, u_char * buf, int len)
228 {
229 volatile int dummy;
230 int modulus = 0xffff;
231 void __iomem *docptr = doc->virtadr;
232 int i;
233
234 if (len <= 0)
235 return;
236
237 if (DoC_is_Millennium(doc)) {
238 /* Read the data via the internal pipeline through CDSN IO register,
239 see Pipelined Read Operations 11.3 */
240 dummy = ReadDOC(docptr, ReadPipeInit);
241
242 /* Millennium should use the LastDataRead register - Pipeline Reads */
243 len--;
244
245 /* This is needed for correctly ECC calculation */
246 modulus = 0xff;
247 }
248
249 for (i = 0; i < len; i++)
250 buf[i] = ReadDOC_(docptr, doc->ioreg + (i & modulus));
251
252 if (DoC_is_Millennium(doc)) {
253 buf[i] = ReadDOC(docptr, LastDataRead);
254 }
255 }
256
257 /* Write a buffer to DoC, taking care of Millennium odditys */
258 static void DoC_WriteBuf(struct DiskOnChip *doc, const u_char * buf, int len)
259 {
260 void __iomem *docptr = doc->virtadr;
261 int i;
262
263 if (len <= 0)
264 return;
265
266 for (i = 0; i < len; i++)
267 WriteDOC_(buf[i], docptr, doc->ioreg + i);
268
269 if (DoC_is_Millennium(doc)) {
270 WriteDOC(0x00, docptr, WritePipeTerm);
271 }
272 }
273
274
275 /* DoC_SelectChip: Select a given flash chip within the current floor */
276
277 static inline int DoC_SelectChip(struct DiskOnChip *doc, int chip)
278 {
279 void __iomem *docptr = doc->virtadr;
280
281 /* Software requirement 11.4.4 before writing DeviceSelect */
282 /* Deassert the CE line to eliminate glitches on the FCE# outputs */
283 WriteDOC(CDSN_CTRL_WP, docptr, CDSNControl);
284 DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */
285
286 /* Select the individual flash chip requested */
287 WriteDOC(chip, docptr, CDSNDeviceSelect);
288 DoC_Delay(doc, 4);
289
290 /* Reassert the CE line */
291 WriteDOC(CDSN_CTRL_CE | CDSN_CTRL_FLASH_IO | CDSN_CTRL_WP, docptr,
292 CDSNControl);
293 DoC_Delay(doc, 4); /* Software requirement 11.4.3 for Millennium */
294
295 /* Wait for it to be ready */
296 return DoC_WaitReady(doc);
297 }
298
299 /* DoC_SelectFloor: Select a given floor (bank of flash chips) */
300
301 static inline int DoC_SelectFloor(struct DiskOnChip *doc, int floor)
302 {
303 void __iomem *docptr = doc->virtadr;
304
305 /* Select the floor (bank) of chips required */
306 WriteDOC(floor, docptr, FloorSelect);
307
308 /* Wait for the chip to be ready */
309 return DoC_WaitReady(doc);
310 }
311
312 /* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */
313
314 static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip)
315 {
316 int mfr, id, i, j;
317 volatile char dummy;
318
319 /* Page in the required floor/chip */
320 DoC_SelectFloor(doc, floor);
321 DoC_SelectChip(doc, chip);
322
323 /* Reset the chip */
324 if (DoC_Command(doc, NAND_CMD_RESET, CDSN_CTRL_WP)) {
325 pr_debug("DoC_Command (reset) for %d,%d returned true\n",
326 floor, chip);
327 return 0;
328 }
329
330
331 /* Read the NAND chip ID: 1. Send ReadID command */
332 if (DoC_Command(doc, NAND_CMD_READID, CDSN_CTRL_WP)) {
333 pr_debug("DoC_Command (ReadID) for %d,%d returned true\n",
334 floor, chip);
335 return 0;
336 }
337
338 /* Read the NAND chip ID: 2. Send address byte zero */
339 DoC_Address(doc, ADDR_COLUMN, 0, CDSN_CTRL_WP, 0);
340
341 /* Read the manufacturer and device id codes from the device */
342
343 if (DoC_is_Millennium(doc)) {
344 DoC_Delay(doc, 2);
345 dummy = ReadDOC(doc->virtadr, ReadPipeInit);
346 mfr = ReadDOC(doc->virtadr, LastDataRead);
347
348 DoC_Delay(doc, 2);
349 dummy = ReadDOC(doc->virtadr, ReadPipeInit);
350 id = ReadDOC(doc->virtadr, LastDataRead);
351 } else {
352 /* CDSN Slow IO register see Software Req 11.4 item 5. */
353 dummy = ReadDOC(doc->virtadr, CDSNSlowIO);
354 DoC_Delay(doc, 2);
355 mfr = ReadDOC_(doc->virtadr, doc->ioreg);
356
357 /* CDSN Slow IO register see Software Req 11.4 item 5. */
358 dummy = ReadDOC(doc->virtadr, CDSNSlowIO);
359 DoC_Delay(doc, 2);
360 id = ReadDOC_(doc->virtadr, doc->ioreg);
361 }
362
363 /* No response - return failure */
364 if (mfr == 0xff || mfr == 0)
365 return 0;
366
367 /* Check it's the same as the first chip we identified.
368 * M-Systems say that any given DiskOnChip device should only
369 * contain _one_ type of flash part, although that's not a
370 * hardware restriction. */
371 if (doc->mfr) {
372 if (doc->mfr == mfr && doc->id == id)
373 return 1; /* This is the same as the first */
374 else
375 printk(KERN_WARNING
376 "Flash chip at floor %d, chip %d is different:\n",
377 floor, chip);
378 }
379
380 /* Print and store the manufacturer and ID codes. */
381 for (i = 0; nand_flash_ids[i].name != NULL; i++) {
382 if (id == nand_flash_ids[i].id) {
383 /* Try to identify manufacturer */
384 for (j = 0; nand_manuf_ids[j].id != 0x0; j++) {
385 if (nand_manuf_ids[j].id == mfr)
386 break;
387 }
388 printk(KERN_INFO
389 "Flash chip found: Manufacturer ID: %2.2X, "
390 "Chip ID: %2.2X (%s:%s)\n", mfr, id,
391 nand_manuf_ids[j].name, nand_flash_ids[i].name);
392 if (!doc->mfr) {
393 doc->mfr = mfr;
394 doc->id = id;
395 doc->chipshift =
396 ffs((nand_flash_ids[i].chipsize << 20)) - 1;
397 doc->page256 = (nand_flash_ids[i].pagesize == 256) ? 1 : 0;
398 doc->pageadrlen = doc->chipshift > 25 ? 3 : 2;
399 doc->erasesize =
400 nand_flash_ids[i].erasesize;
401 return 1;
402 }
403 return 0;
404 }
405 }
406
407
408 /* We haven't fully identified the chip. Print as much as we know. */
409 printk(KERN_WARNING "Unknown flash chip found: %2.2X %2.2X\n",
410 id, mfr);
411
412 printk(KERN_WARNING "Please report to dwmw2@infradead.org\n");
413 return 0;
414 }
415
416 /* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */
417
418 static void DoC_ScanChips(struct DiskOnChip *this, int maxchips)
419 {
420 int floor, chip;
421 int numchips[MAX_FLOORS];
422 int ret = 1;
423
424 this->numchips = 0;
425 this->mfr = 0;
426 this->id = 0;
427
428 /* For each floor, find the number of valid chips it contains */
429 for (floor = 0; floor < MAX_FLOORS; floor++) {
430 ret = 1;
431 numchips[floor] = 0;
432 for (chip = 0; chip < maxchips && ret != 0; chip++) {
433
434 ret = DoC_IdentChip(this, floor, chip);
435 if (ret) {
436 numchips[floor]++;
437 this->numchips++;
438 }
439 }
440 }
441
442 /* If there are none at all that we recognise, bail */
443 if (!this->numchips) {
444 printk(KERN_NOTICE "No flash chips recognised.\n");
445 return;
446 }
447
448 /* Allocate an array to hold the information for each chip */
449 this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL);
450 if (!this->chips) {
451 printk(KERN_NOTICE "No memory for allocating chip info structures\n");
452 return;
453 }
454
455 ret = 0;
456
457 /* Fill out the chip array with {floor, chipno} for each
458 * detected chip in the device. */
459 for (floor = 0; floor < MAX_FLOORS; floor++) {
460 for (chip = 0; chip < numchips[floor]; chip++) {
461 this->chips[ret].floor = floor;
462 this->chips[ret].chip = chip;
463 this->chips[ret].curadr = 0;
464 this->chips[ret].curmode = 0x50;
465 ret++;
466 }
467 }
468
469 /* Calculate and print the total size of the device */
470 this->totlen = this->numchips * (1 << this->chipshift);
471
472 printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n",
473 this->numchips, this->totlen >> 20);
474 }
475
476 static int DoC2k_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2)
477 {
478 int tmp1, tmp2, retval;
479 if (doc1->physadr == doc2->physadr)
480 return 1;
481
482 /* Use the alias resolution register which was set aside for this
483 * purpose. If it's value is the same on both chips, they might
484 * be the same chip, and we write to one and check for a change in
485 * the other. It's unclear if this register is usuable in the
486 * DoC 2000 (it's in the Millennium docs), but it seems to work. */
487 tmp1 = ReadDOC(doc1->virtadr, AliasResolution);
488 tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
489 if (tmp1 != tmp2)
490 return 0;
491
492 WriteDOC((tmp1 + 1) % 0xff, doc1->virtadr, AliasResolution);
493 tmp2 = ReadDOC(doc2->virtadr, AliasResolution);
494 if (tmp2 == (tmp1 + 1) % 0xff)
495 retval = 1;
496 else
497 retval = 0;
498
499 /* Restore register contents. May not be necessary, but do it just to
500 * be safe. */
501 WriteDOC(tmp1, doc1->virtadr, AliasResolution);
502
503 return retval;
504 }
505
506 /* This routine is found from the docprobe code by symbol_get(),
507 * which will bump the use count of this module. */
508 void DoC2k_init(struct mtd_info *mtd)
509 {
510 struct DiskOnChip *this = mtd->priv;
511 struct DiskOnChip *old = NULL;
512 int maxchips;
513
514 /* We must avoid being called twice for the same device. */
515
516 if (doc2klist)
517 old = doc2klist->priv;
518
519 while (old) {
520 if (DoC2k_is_alias(old, this)) {
521 printk(KERN_NOTICE
522 "Ignoring DiskOnChip 2000 at 0x%lX - already configured\n",
523 this->physadr);
524 iounmap(this->virtadr);
525 kfree(mtd);
526 return;
527 }
528 if (old->nextdoc)
529 old = old->nextdoc->priv;
530 else
531 old = NULL;
532 }
533
534
535 switch (this->ChipID) {
536 case DOC_ChipID_Doc2kTSOP:
537 mtd->name = "DiskOnChip 2000 TSOP";
538 this->ioreg = DoC_Mil_CDSN_IO;
539 /* Pretend it's a Millennium */
540 this->ChipID = DOC_ChipID_DocMil;
541 maxchips = MAX_CHIPS;
542 break;
543 case DOC_ChipID_Doc2k:
544 mtd->name = "DiskOnChip 2000";
545 this->ioreg = DoC_2k_CDSN_IO;
546 maxchips = MAX_CHIPS;
547 break;
548 case DOC_ChipID_DocMil:
549 mtd->name = "DiskOnChip Millennium";
550 this->ioreg = DoC_Mil_CDSN_IO;
551 maxchips = MAX_CHIPS_MIL;
552 break;
553 default:
554 printk("Unknown ChipID 0x%02x\n", this->ChipID);
555 kfree(mtd);
556 iounmap(this->virtadr);
557 return;
558 }
559
560 printk(KERN_NOTICE "%s found at address 0x%lX\n", mtd->name,
561 this->physadr);
562
563 mtd->type = MTD_NANDFLASH;
564 mtd->flags = MTD_CAP_NANDFLASH;
565 mtd->size = 0;
566 mtd->erasesize = 0;
567 mtd->writesize = 512;
568 mtd->oobsize = 16;
569 mtd->owner = THIS_MODULE;
570 mtd->erase = doc_erase;
571 mtd->point = NULL;
572 mtd->unpoint = NULL;
573 mtd->read = doc_read;
574 mtd->write = doc_write;
575 mtd->read_oob = doc_read_oob;
576 mtd->write_oob = doc_write_oob;
577 mtd->sync = NULL;
578
579 this->totlen = 0;
580 this->numchips = 0;
581
582 this->curfloor = -1;
583 this->curchip = -1;
584 mutex_init(&this->lock);
585
586 /* Ident all the chips present. */
587 DoC_ScanChips(this, maxchips);
588
589 if (!this->totlen) {
590 kfree(mtd);
591 iounmap(this->virtadr);
592 } else {
593 this->nextdoc = doc2klist;
594 doc2klist = mtd;
595 mtd->size = this->totlen;
596 mtd->erasesize = this->erasesize;
597 mtd_device_register(mtd, NULL, 0);
598 return;
599 }
600 }
601 EXPORT_SYMBOL_GPL(DoC2k_init);
602
603 static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
604 size_t * retlen, u_char * buf)
605 {
606 struct DiskOnChip *this = mtd->priv;
607 void __iomem *docptr = this->virtadr;
608 struct Nand *mychip;
609 unsigned char syndrome[6], eccbuf[6];
610 volatile char dummy;
611 int i, len256 = 0, ret=0;
612 size_t left = len;
613
614 /* Don't allow read past end of device */
615 if (from >= this->totlen)
616 return -EINVAL;
617
618 mutex_lock(&this->lock);
619
620 *retlen = 0;
621 while (left) {
622 len = left;
623
624 /* Don't allow a single read to cross a 512-byte block boundary */
625 if (from + len > ((from | 0x1ff) + 1))
626 len = ((from | 0x1ff) + 1) - from;
627
628 /* The ECC will not be calculated correctly if less than 512 is read */
629 if (len != 0x200)
630 printk(KERN_WARNING
631 "ECC needs a full sector read (adr: %lx size %lx)\n",
632 (long) from, (long) len);
633
634 /* printk("DoC_Read (adr: %lx size %lx)\n", (long) from, (long) len); */
635
636
637 /* Find the chip which is to be used and select it */
638 mychip = &this->chips[from >> (this->chipshift)];
639
640 if (this->curfloor != mychip->floor) {
641 DoC_SelectFloor(this, mychip->floor);
642 DoC_SelectChip(this, mychip->chip);
643 } else if (this->curchip != mychip->chip) {
644 DoC_SelectChip(this, mychip->chip);
645 }
646
647 this->curfloor = mychip->floor;
648 this->curchip = mychip->chip;
649
650 DoC_Command(this,
651 (!this->page256
652 && (from & 0x100)) ? NAND_CMD_READ1 : NAND_CMD_READ0,
653 CDSN_CTRL_WP);
654 DoC_Address(this, ADDR_COLUMN_PAGE, from, CDSN_CTRL_WP,
655 CDSN_CTRL_ECC_IO);
656
657 /* Prime the ECC engine */
658 WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
659 WriteDOC(DOC_ECC_EN, docptr, ECCConf);
660
661 /* treat crossing 256-byte sector for 2M x 8bits devices */
662 if (this->page256 && from + len > (from | 0xff) + 1) {
663 len256 = (from | 0xff) + 1 - from;
664 DoC_ReadBuf(this, buf, len256);
665
666 DoC_Command(this, NAND_CMD_READ0, CDSN_CTRL_WP);
667 DoC_Address(this, ADDR_COLUMN_PAGE, from + len256,
668 CDSN_CTRL_WP, CDSN_CTRL_ECC_IO);
669 }
670
671 DoC_ReadBuf(this, &buf[len256], len - len256);
672
673 /* Let the caller know we completed it */
674 *retlen += len;
675
676 /* Read the ECC data through the DiskOnChip ECC logic */
677 /* Note: this will work even with 2M x 8bit devices as */
678 /* they have 8 bytes of OOB per 256 page. mf. */
679 DoC_ReadBuf(this, eccbuf, 6);
680
681 /* Flush the pipeline */
682 if (DoC_is_Millennium(this)) {
683 dummy = ReadDOC(docptr, ECCConf);
684 dummy = ReadDOC(docptr, ECCConf);
685 i = ReadDOC(docptr, ECCConf);
686 } else {
687 dummy = ReadDOC(docptr, 2k_ECCStatus);
688 dummy = ReadDOC(docptr, 2k_ECCStatus);
689 i = ReadDOC(docptr, 2k_ECCStatus);
690 }
691
692 /* Check the ECC Status */
693 if (i & 0x80) {
694 int nb_errors;
695 /* There was an ECC error */
696 #ifdef ECC_DEBUG
697 printk(KERN_ERR "DiskOnChip ECC Error: Read at %lx\n", (long)from);
698 #endif
699 /* Read the ECC syndrome through the DiskOnChip ECC
700 logic. These syndrome will be all ZERO when there
701 is no error */
702 for (i = 0; i < 6; i++) {
703 syndrome[i] =
704 ReadDOC(docptr, ECCSyndrome0 + i);
705 }
706 nb_errors = doc_decode_ecc(buf, syndrome);
707
708 #ifdef ECC_DEBUG
709 printk(KERN_ERR "Errors corrected: %x\n", nb_errors);
710 #endif
711 if (nb_errors < 0) {
712 /* We return error, but have actually done the
713 read. Not that this can be told to
714 user-space, via sys_read(), but at least
715 MTD-aware stuff can know about it by
716 checking *retlen */
717 ret = -EIO;
718 }
719 }
720
721 #ifdef PSYCHO_DEBUG
722 printk(KERN_DEBUG "ECC DATA at %lxB: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
723 (long)from, eccbuf[0], eccbuf[1], eccbuf[2],
724 eccbuf[3], eccbuf[4], eccbuf[5]);
725 #endif
726
727 /* disable the ECC engine */
728 WriteDOC(DOC_ECC_DIS, docptr , ECCConf);
729
730 /* according to 11.4.1, we need to wait for the busy line
731 * drop if we read to the end of the page. */
732 if(0 == ((from + len) & 0x1ff))
733 {
734 DoC_WaitReady(this);
735 }
736
737 from += len;
738 left -= len;
739 buf += len;
740 }
741
742 mutex_unlock(&this->lock);
743
744 return ret;
745 }
746
747 static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
748 size_t * retlen, const u_char * buf)
749 {
750 struct DiskOnChip *this = mtd->priv;
751 int di; /* Yes, DI is a hangover from when I was disassembling the binary driver */
752 void __iomem *docptr = this->virtadr;
753 unsigned char eccbuf[6];
754 volatile char dummy;
755 int len256 = 0;
756 struct Nand *mychip;
757 size_t left = len;
758 int status;
759
760 /* Don't allow write past end of device */
761 if (to >= this->totlen)
762 return -EINVAL;
763
764 mutex_lock(&this->lock);
765
766 *retlen = 0;
767 while (left) {
768 len = left;
769
770 /* Don't allow a single write to cross a 512-byte block boundary */
771 if (to + len > ((to | 0x1ff) + 1))
772 len = ((to | 0x1ff) + 1) - to;
773
774 /* The ECC will not be calculated correctly if less than 512 is written */
775 /* DBB-
776 if (len != 0x200 && eccbuf)
777 printk(KERN_WARNING
778 "ECC needs a full sector write (adr: %lx size %lx)\n",
779 (long) to, (long) len);
780 -DBB */
781
782 /* printk("DoC_Write (adr: %lx size %lx)\n", (long) to, (long) len); */
783
784 /* Find the chip which is to be used and select it */
785 mychip = &this->chips[to >> (this->chipshift)];
786
787 if (this->curfloor != mychip->floor) {
788 DoC_SelectFloor(this, mychip->floor);
789 DoC_SelectChip(this, mychip->chip);
790 } else if (this->curchip != mychip->chip) {
791 DoC_SelectChip(this, mychip->chip);
792 }
793
794 this->curfloor = mychip->floor;
795 this->curchip = mychip->chip;
796
797 /* Set device to main plane of flash */
798 DoC_Command(this, NAND_CMD_RESET, CDSN_CTRL_WP);
799 DoC_Command(this,
800 (!this->page256
801 && (to & 0x100)) ? NAND_CMD_READ1 : NAND_CMD_READ0,
802 CDSN_CTRL_WP);
803
804 DoC_Command(this, NAND_CMD_SEQIN, 0);
805 DoC_Address(this, ADDR_COLUMN_PAGE, to, 0, CDSN_CTRL_ECC_IO);
806
807 /* Prime the ECC engine */
808 WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
809 WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf);
810
811 /* treat crossing 256-byte sector for 2M x 8bits devices */
812 if (this->page256 && to + len > (to | 0xff) + 1) {
813 len256 = (to | 0xff) + 1 - to;
814 DoC_WriteBuf(this, buf, len256);
815
816 DoC_Command(this, NAND_CMD_PAGEPROG, 0);
817
818 DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP);
819 /* There's an implicit DoC_WaitReady() in DoC_Command */
820
821 dummy = ReadDOC(docptr, CDSNSlowIO);
822 DoC_Delay(this, 2);
823
824 if (ReadDOC_(docptr, this->ioreg) & 1) {
825 printk(KERN_ERR "Error programming flash\n");
826 /* Error in programming */
827 *retlen = 0;
828 mutex_unlock(&this->lock);
829 return -EIO;
830 }
831
832 DoC_Command(this, NAND_CMD_SEQIN, 0);
833 DoC_Address(this, ADDR_COLUMN_PAGE, to + len256, 0,
834 CDSN_CTRL_ECC_IO);
835 }
836
837 DoC_WriteBuf(this, &buf[len256], len - len256);
838
839 WriteDOC(CDSN_CTRL_ECC_IO | CDSN_CTRL_CE, docptr, CDSNControl);
840
841 if (DoC_is_Millennium(this)) {
842 WriteDOC(0, docptr, NOP);
843 WriteDOC(0, docptr, NOP);
844 WriteDOC(0, docptr, NOP);
845 } else {
846 WriteDOC_(0, docptr, this->ioreg);
847 WriteDOC_(0, docptr, this->ioreg);
848 WriteDOC_(0, docptr, this->ioreg);
849 }
850
851 WriteDOC(CDSN_CTRL_ECC_IO | CDSN_CTRL_FLASH_IO | CDSN_CTRL_CE, docptr,
852 CDSNControl);
853
854 /* Read the ECC data through the DiskOnChip ECC logic */
855 for (di = 0; di < 6; di++) {
856 eccbuf[di] = ReadDOC(docptr, ECCSyndrome0 + di);
857 }
858
859 /* Reset the ECC engine */
860 WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
861
862 #ifdef PSYCHO_DEBUG
863 printk
864 ("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
865 (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3],
866 eccbuf[4], eccbuf[5]);
867 #endif
868 DoC_Command(this, NAND_CMD_PAGEPROG, 0);
869
870 DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP);
871 /* There's an implicit DoC_WaitReady() in DoC_Command */
872
873 if (DoC_is_Millennium(this)) {
874 ReadDOC(docptr, ReadPipeInit);
875 status = ReadDOC(docptr, LastDataRead);
876 } else {
877 dummy = ReadDOC(docptr, CDSNSlowIO);
878 DoC_Delay(this, 2);
879 status = ReadDOC_(docptr, this->ioreg);
880 }
881
882 if (status & 1) {
883 printk(KERN_ERR "Error programming flash\n");
884 /* Error in programming */
885 *retlen = 0;
886 mutex_unlock(&this->lock);
887 return -EIO;
888 }
889
890 /* Let the caller know we completed it */
891 *retlen += len;
892
893 {
894 unsigned char x[8];
895 size_t dummy;
896 int ret;
897
898 /* Write the ECC data to flash */
899 for (di=0; di<6; di++)
900 x[di] = eccbuf[di];
901
902 x[6]=0x55;
903 x[7]=0x55;
904
905 ret = doc_write_oob_nolock(mtd, to, 8, &dummy, x);
906 if (ret) {
907 mutex_unlock(&this->lock);
908 return ret;
909 }
910 }
911
912 to += len;
913 left -= len;
914 buf += len;
915 }
916
917 mutex_unlock(&this->lock);
918 return 0;
919 }
920
921 static int doc_read_oob(struct mtd_info *mtd, loff_t ofs,
922 struct mtd_oob_ops *ops)
923 {
924 struct DiskOnChip *this = mtd->priv;
925 int len256 = 0, ret;
926 struct Nand *mychip;
927 uint8_t *buf = ops->oobbuf;
928 size_t len = ops->len;
929
930 BUG_ON(ops->mode != MTD_OOB_PLACE);
931
932 ofs += ops->ooboffs;
933
934 mutex_lock(&this->lock);
935
936 mychip = &this->chips[ofs >> this->chipshift];
937
938 if (this->curfloor != mychip->floor) {
939 DoC_SelectFloor(this, mychip->floor);
940 DoC_SelectChip(this, mychip->chip);
941 } else if (this->curchip != mychip->chip) {
942 DoC_SelectChip(this, mychip->chip);
943 }
944 this->curfloor = mychip->floor;
945 this->curchip = mychip->chip;
946
947 /* update address for 2M x 8bit devices. OOB starts on the second */
948 /* page to maintain compatibility with doc_read_ecc. */
949 if (this->page256) {
950 if (!(ofs & 0x8))
951 ofs += 0x100;
952 else
953 ofs -= 0x8;
954 }
955
956 DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP);
957 DoC_Address(this, ADDR_COLUMN_PAGE, ofs, CDSN_CTRL_WP, 0);
958
959 /* treat crossing 8-byte OOB data for 2M x 8bit devices */
960 /* Note: datasheet says it should automaticaly wrap to the */
961 /* next OOB block, but it didn't work here. mf. */
962 if (this->page256 && ofs + len > (ofs | 0x7) + 1) {
963 len256 = (ofs | 0x7) + 1 - ofs;
964 DoC_ReadBuf(this, buf, len256);
965
966 DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP);
967 DoC_Address(this, ADDR_COLUMN_PAGE, ofs & (~0x1ff),
968 CDSN_CTRL_WP, 0);
969 }
970
971 DoC_ReadBuf(this, &buf[len256], len - len256);
972
973 ops->retlen = len;
974 /* Reading the full OOB data drops us off of the end of the page,
975 * causing the flash device to go into busy mode, so we need
976 * to wait until ready 11.4.1 and Toshiba TC58256FT docs */
977
978 ret = DoC_WaitReady(this);
979
980 mutex_unlock(&this->lock);
981 return ret;
982
983 }
984
985 static int doc_write_oob_nolock(struct mtd_info *mtd, loff_t ofs, size_t len,
986 size_t * retlen, const u_char * buf)
987 {
988 struct DiskOnChip *this = mtd->priv;
989 int len256 = 0;
990 void __iomem *docptr = this->virtadr;
991 struct Nand *mychip = &this->chips[ofs >> this->chipshift];
992 volatile int dummy;
993 int status;
994
995 // printk("doc_write_oob(%lx, %d): %2.2X %2.2X %2.2X %2.2X ... %2.2X %2.2X .. %2.2X %2.2X\n",(long)ofs, len,
996 // buf[0], buf[1], buf[2], buf[3], buf[8], buf[9], buf[14],buf[15]);
997
998 /* Find the chip which is to be used and select it */
999 if (this->curfloor != mychip->floor) {
1000 DoC_SelectFloor(this, mychip->floor);
1001 DoC_SelectChip(this, mychip->chip);
1002 } else if (this->curchip != mychip->chip) {
1003 DoC_SelectChip(this, mychip->chip);
1004 }
1005 this->curfloor = mychip->floor;
1006 this->curchip = mychip->chip;
1007
1008 /* disable the ECC engine */
1009 WriteDOC (DOC_ECC_RESET, docptr, ECCConf);
1010 WriteDOC (DOC_ECC_DIS, docptr, ECCConf);
1011
1012 /* Reset the chip, see Software Requirement 11.4 item 1. */
1013 DoC_Command(this, NAND_CMD_RESET, CDSN_CTRL_WP);
1014
1015 /* issue the Read2 command to set the pointer to the Spare Data Area. */
1016 DoC_Command(this, NAND_CMD_READOOB, CDSN_CTRL_WP);
1017
1018 /* update address for 2M x 8bit devices. OOB starts on the second */
1019 /* page to maintain compatibility with doc_read_ecc. */
1020 if (this->page256) {
1021 if (!(ofs & 0x8))
1022 ofs += 0x100;
1023 else
1024 ofs -= 0x8;
1025 }
1026
1027 /* issue the Serial Data In command to initial the Page Program process */
1028 DoC_Command(this, NAND_CMD_SEQIN, 0);
1029 DoC_Address(this, ADDR_COLUMN_PAGE, ofs, 0, 0);
1030
1031 /* treat crossing 8-byte OOB data for 2M x 8bit devices */
1032 /* Note: datasheet says it should automaticaly wrap to the */
1033 /* next OOB block, but it didn't work here. mf. */
1034 if (this->page256 && ofs + len > (ofs | 0x7) + 1) {
1035 len256 = (ofs | 0x7) + 1 - ofs;
1036 DoC_WriteBuf(this, buf, len256);
1037
1038 DoC_Command(this, NAND_CMD_PAGEPROG, 0);
1039 DoC_Command(this, NAND_CMD_STATUS, 0);
1040 /* DoC_WaitReady() is implicit in DoC_Command */
1041
1042 if (DoC_is_Millennium(this)) {
1043 ReadDOC(docptr, ReadPipeInit);
1044 status = ReadDOC(docptr, LastDataRead);
1045 } else {
1046 dummy = ReadDOC(docptr, CDSNSlowIO);
1047 DoC_Delay(this, 2);
1048 status = ReadDOC_(docptr, this->ioreg);
1049 }
1050
1051 if (status & 1) {
1052 printk(KERN_ERR "Error programming oob data\n");
1053 /* There was an error */
1054 *retlen = 0;
1055 return -EIO;
1056 }
1057 DoC_Command(this, NAND_CMD_SEQIN, 0);
1058 DoC_Address(this, ADDR_COLUMN_PAGE, ofs & (~0x1ff), 0, 0);
1059 }
1060
1061 DoC_WriteBuf(this, &buf[len256], len - len256);
1062
1063 DoC_Command(this, NAND_CMD_PAGEPROG, 0);
1064 DoC_Command(this, NAND_CMD_STATUS, 0);
1065 /* DoC_WaitReady() is implicit in DoC_Command */
1066
1067 if (DoC_is_Millennium(this)) {
1068 ReadDOC(docptr, ReadPipeInit);
1069 status = ReadDOC(docptr, LastDataRead);
1070 } else {
1071 dummy = ReadDOC(docptr, CDSNSlowIO);
1072 DoC_Delay(this, 2);
1073 status = ReadDOC_(docptr, this->ioreg);
1074 }
1075
1076 if (status & 1) {
1077 printk(KERN_ERR "Error programming oob data\n");
1078 /* There was an error */
1079 *retlen = 0;
1080 return -EIO;
1081 }
1082
1083 *retlen = len;
1084 return 0;
1085
1086 }
1087
1088 static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
1089 struct mtd_oob_ops *ops)
1090 {
1091 struct DiskOnChip *this = mtd->priv;
1092 int ret;
1093
1094 BUG_ON(ops->mode != MTD_OOB_PLACE);
1095
1096 mutex_lock(&this->lock);
1097 ret = doc_write_oob_nolock(mtd, ofs + ops->ooboffs, ops->len,
1098 &ops->retlen, ops->oobbuf);
1099
1100 mutex_unlock(&this->lock);
1101 return ret;
1102 }
1103
1104 static int doc_erase(struct mtd_info *mtd, struct erase_info *instr)
1105 {
1106 struct DiskOnChip *this = mtd->priv;
1107 __u32 ofs = instr->addr;
1108 __u32 len = instr->len;
1109 volatile int dummy;
1110 void __iomem *docptr = this->virtadr;
1111 struct Nand *mychip;
1112 int status;
1113
1114 mutex_lock(&this->lock);
1115
1116 if (ofs & (mtd->erasesize-1) || len & (mtd->erasesize-1)) {
1117 mutex_unlock(&this->lock);
1118 return -EINVAL;
1119 }
1120
1121 instr->state = MTD_ERASING;
1122
1123 /* FIXME: Do this in the background. Use timers or schedule_task() */
1124 while(len) {
1125 mychip = &this->chips[ofs >> this->chipshift];
1126
1127 if (this->curfloor != mychip->floor) {
1128 DoC_SelectFloor(this, mychip->floor);
1129 DoC_SelectChip(this, mychip->chip);
1130 } else if (this->curchip != mychip->chip) {
1131 DoC_SelectChip(this, mychip->chip);
1132 }
1133 this->curfloor = mychip->floor;
1134 this->curchip = mychip->chip;
1135
1136 DoC_Command(this, NAND_CMD_ERASE1, 0);
1137 DoC_Address(this, ADDR_PAGE, ofs, 0, 0);
1138 DoC_Command(this, NAND_CMD_ERASE2, 0);
1139
1140 DoC_Command(this, NAND_CMD_STATUS, CDSN_CTRL_WP);
1141
1142 if (DoC_is_Millennium(this)) {
1143 ReadDOC(docptr, ReadPipeInit);
1144 status = ReadDOC(docptr, LastDataRead);
1145 } else {
1146 dummy = ReadDOC(docptr, CDSNSlowIO);
1147 DoC_Delay(this, 2);
1148 status = ReadDOC_(docptr, this->ioreg);
1149 }
1150
1151 if (status & 1) {
1152 printk(KERN_ERR "Error erasing at 0x%x\n", ofs);
1153 /* There was an error */
1154 instr->state = MTD_ERASE_FAILED;
1155 goto callback;
1156 }
1157 ofs += mtd->erasesize;
1158 len -= mtd->erasesize;
1159 }
1160 instr->state = MTD_ERASE_DONE;
1161
1162 callback:
1163 mtd_erase_callback(instr);
1164
1165 mutex_unlock(&this->lock);
1166 return 0;
1167 }
1168
1169
1170 /****************************************************************************
1171 *
1172 * Module stuff
1173 *
1174 ****************************************************************************/
1175
1176 static void __exit cleanup_doc2000(void)
1177 {
1178 struct mtd_info *mtd;
1179 struct DiskOnChip *this;
1180
1181 while ((mtd = doc2klist)) {
1182 this = mtd->priv;
1183 doc2klist = this->nextdoc;
1184
1185 mtd_device_unregister(mtd);
1186
1187 iounmap(this->virtadr);
1188 kfree(this->chips);
1189 kfree(mtd);
1190 }
1191 }
1192
1193 module_exit(cleanup_doc2000);
1194
1195 MODULE_LICENSE("GPL");
1196 MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org> et al.");
1197 MODULE_DESCRIPTION("MTD driver for DiskOnChip 2000 and Millennium");
1198
Linux kernel - Deliverables
This page took 0.058794 seconds and 5 git commands to generate.