drivers/mtd/nand/gpmi-nand/gpmi-nand.h

   1 /*
   2  * Freescale GPMI NAND Flash Driver
   3  *
   4  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   5  * Copyright (C) 2008 Embedded Alley Solutions, Inc.
   6  *
   7  * This program is free software; you can redistribute it and/or modify
   8  * it under the terms of the GNU General Public License as published by
   9  * the Free Software Foundation; either version 2 of the License, or
  10  * (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  15  * GNU General Public License for more details.
  16  */
  17 #ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
  18 #define __DRIVERS_MTD_NAND_GPMI_NAND_H
  19
  20 #include <linux/mtd/nand.h>
  21 #include <linux/platform_device.h>
  22 #include <linux/dma-mapping.h>
  23 #include <linux/dmaengine.h>
  24
  25 #define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */
  26 struct resources {
  27         void __iomem  *gpmi_regs;
  28         void __iomem  *bch_regs;
  29         unsigned int  dma_low_channel;
  30         unsigned int  dma_high_channel;
  31         struct clk    *clock[GPMI_CLK_MAX];
  32 };
  33
  34 /**
  35  * struct bch_geometry - BCH geometry description.
  36  * @gf_len:                   The length of Galois Field. (e.g., 13 or 14)
  37  * @ecc_strength:             A number that describes the strength of the ECC
  38  *                            algorithm.
  39  * @page_size:                The size, in bytes, of a physical page, including
  40  *                            both data and OOB.
  41  * @metadata_size:            The size, in bytes, of the metadata.
  42  * @ecc_chunk_size:           The size, in bytes, of a single ECC chunk. Note
  43  *                            the first chunk in the page includes both data and
  44  *                            metadata, so it's a bit larger than this value.
  45  * @ecc_chunk_count:          The number of ECC chunks in the page,
  46  * @payload_size:             The size, in bytes, of the payload buffer.
  47  * @auxiliary_size:           The size, in bytes, of the auxiliary buffer.
  48  * @auxiliary_status_offset:  The offset into the auxiliary buffer at which
  49  *                            the ECC status appears.
  50  * @block_mark_byte_offset:   The byte offset in the ECC-based page view at
  51  *                            which the underlying physical block mark appears.
  52  * @block_mark_bit_offset:    The bit offset into the ECC-based page view at
  53  *                            which the underlying physical block mark appears.
  54  */
  55 struct bch_geometry {
  56         unsigned int  gf_len;
  57         unsigned int  ecc_strength;
  58         unsigned int  page_size;
  59         unsigned int  metadata_size;
  60         unsigned int  ecc_chunk_size;
  61         unsigned int  ecc_chunk_count;
  62         unsigned int  payload_size;
  63         unsigned int  auxiliary_size;
  64         unsigned int  auxiliary_status_offset;
  65         unsigned int  block_mark_byte_offset;
  66         unsigned int  block_mark_bit_offset;
  67 };
  68
  69 /**
  70  * struct boot_rom_geometry - Boot ROM geometry description.
  71  * @stride_size_in_pages:        The size of a boot block stride, in pages.
  72  * @search_area_stride_exponent: The logarithm to base 2 of the size of a
  73  *                               search area in boot block strides.
  74  */
  75 struct boot_rom_geometry {
  76         unsigned int  stride_size_in_pages;
  77         unsigned int  search_area_stride_exponent;
  78 };
  79
  80 /* DMA operations types */
  81 enum dma_ops_type {
  82         DMA_FOR_COMMAND = 1,
  83         DMA_FOR_READ_DATA,
  84         DMA_FOR_WRITE_DATA,
  85         DMA_FOR_READ_ECC_PAGE,
  86         DMA_FOR_WRITE_ECC_PAGE
  87 };
  88
  89 /**
  90  * struct nand_timing - Fundamental timing attributes for NAND.
  91  * @data_setup_in_ns:         The data setup time, in nanoseconds. Usually the
  92  *                            maximum of tDS and tWP. A negative value
  93  *                            indicates this characteristic isn't known.
  94  * @data_hold_in_ns:          The data hold time, in nanoseconds. Usually the
  95  *                            maximum of tDH, tWH and tREH. A negative value
  96  *                            indicates this characteristic isn't known.
  97  * @address_setup_in_ns:      The address setup time, in nanoseconds. Usually
  98  *                            the maximum of tCLS, tCS and tALS. A negative
  99  *                            value indicates this characteristic isn't known.
 100  * @gpmi_sample_delay_in_ns:  A GPMI-specific timing parameter. A negative value
 101  *                            indicates this characteristic isn't known.
 102  * @tREA_in_ns:               tREA, in nanoseconds, from the data sheet. A
 103  *                            negative value indicates this characteristic isn't
 104  *                            known.
 105  * @tRLOH_in_ns:              tRLOH, in nanoseconds, from the data sheet. A
 106  *                            negative value indicates this characteristic isn't
 107  *                            known.
 108  * @tRHOH_in_ns:              tRHOH, in nanoseconds, from the data sheet. A
 109  *                            negative value indicates this characteristic isn't
 110  *                            known.
 111  */
 112 struct nand_timing {
 113         int8_t  data_setup_in_ns;
 114         int8_t  data_hold_in_ns;
 115         int8_t  address_setup_in_ns;
 116         int8_t  gpmi_sample_delay_in_ns;
 117         int8_t  tREA_in_ns;
 118         int8_t  tRLOH_in_ns;
 119         int8_t  tRHOH_in_ns;
 120 };
 121
 122 enum gpmi_type {
 123         IS_MX23,
 124         IS_MX28,
 125         IS_MX6Q,
 126         IS_MX6SX
 127 };
 128
 129 struct gpmi_devdata {
 130         enum gpmi_type type;
 131         int bch_max_ecc_strength;
 132         int max_chain_delay; /* See the async EDO mode */
 133 };
 134
 135 struct gpmi_nand_data {
 136         /* flags */
 137 #define GPMI_ASYNC_EDO_ENABLED  (1 << 0)
 138 #define GPMI_TIMING_INIT_OK     (1 << 1)
 139         int                     flags;
 140         const struct gpmi_devdata *devdata;
 141
 142         /* System Interface */
 143         struct device           *dev;
 144         struct platform_device  *pdev;
 145
 146         /* Resources */
 147         struct resources        resources;
 148
 149         /* Flash Hardware */
 150         struct nand_timing      timing;
 151         int                     timing_mode;
 152
 153         /* BCH */
 154         struct bch_geometry     bch_geometry;
 155         struct completion       bch_done;
 156
 157         /* NAND Boot issue */
 158         bool                    swap_block_mark;
 159         struct boot_rom_geometry rom_geometry;
 160
 161         /* MTD / NAND */
 162         struct nand_chip        nand;
 163
 164         /* General-use Variables */
 165         int                     current_chip;
 166         unsigned int            command_length;
 167
 168         /* passed from upper layer */
 169         uint8_t                 *upper_buf;
 170         int                     upper_len;
 171
 172         /* for DMA operations */
 173         bool                    direct_dma_map_ok;
 174
 175         struct scatterlist      cmd_sgl;
 176         char                    *cmd_buffer;
 177
 178         struct scatterlist      data_sgl;
 179         char                    *data_buffer_dma;
 180
 181         void                    *page_buffer_virt;
 182         dma_addr_t              page_buffer_phys;
 183         unsigned int            page_buffer_size;
 184
 185         void                    *payload_virt;
 186         dma_addr_t              payload_phys;
 187
 188         void                    *auxiliary_virt;
 189         dma_addr_t              auxiliary_phys;
 190
 191         void                    *raw_buffer;
 192
 193         /* DMA channels */
 194 #define DMA_CHANS               8
 195         struct dma_chan         *dma_chans[DMA_CHANS];
 196         enum dma_ops_type       last_dma_type;
 197         enum dma_ops_type       dma_type;
 198         struct completion       dma_done;
 199
 200         /* private */
 201         void                    *private;
 202 };
 203
 204 /**
 205  * struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
 206  * @data_setup_in_cycles:      The data setup time, in cycles.
 207  * @data_hold_in_cycles:       The data hold time, in cycles.
 208  * @address_setup_in_cycles:   The address setup time, in cycles.
 209  * @device_busy_timeout:       The timeout waiting for NAND Ready/Busy,
 210  *                             this value is the number of cycles multiplied
 211  *                             by 4096.
 212  * @use_half_periods:          Indicates the clock is running slowly, so the
 213  *                             NFC DLL should use half-periods.
 214  * @sample_delay_factor:       The sample delay factor.
 215  * @wrn_dly_sel:               The delay on the GPMI write strobe.
 216  */
 217 struct gpmi_nfc_hardware_timing {
 218         /* for HW_GPMI_TIMING0 */
 219         uint8_t  data_setup_in_cycles;
 220         uint8_t  data_hold_in_cycles;
 221         uint8_t  address_setup_in_cycles;
 222
 223         /* for HW_GPMI_TIMING1 */
 224         uint16_t device_busy_timeout;
 225 #define GPMI_DEFAULT_BUSY_TIMEOUT       0x500 /* default busy timeout value.*/
 226
 227         /* for HW_GPMI_CTRL1 */
 228         bool     use_half_periods;
 229         uint8_t  sample_delay_factor;
 230         uint8_t  wrn_dly_sel;
 231 };
 232
 233 /**
 234  * struct timing_threshod - Timing threshold
 235  * @max_data_setup_cycles:       The maximum number of data setup cycles that
 236  *                               can be expressed in the hardware.
 237  * @internal_data_setup_in_ns:   The time, in ns, that the NFC hardware requires
 238  *                               for data read internal setup. In the Reference
 239  *                               Manual, see the chapter "High-Speed NAND
 240  *                               Timing" for more details.
 241  * @max_sample_delay_factor:     The maximum sample delay factor that can be
 242  *                               expressed in the hardware.
 243  * @max_dll_clock_period_in_ns:  The maximum period of the GPMI clock that the
 244  *                               sample delay DLL hardware can possibly work
 245  *                               with (the DLL is unusable with longer periods).
 246  *                               If the full-cycle period is greater than HALF
 247  *                               this value, the DLL must be configured to use
 248  *                               half-periods.
 249  * @max_dll_delay_in_ns:         The maximum amount of delay, in ns, that the
 250  *                               DLL can implement.
 251  * @clock_frequency_in_hz:       The clock frequency, in Hz, during the current
 252  *                               I/O transaction. If no I/O transaction is in
 253  *                               progress, this is the clock frequency during
 254  *                               the most recent I/O transaction.
 255  */
 256 struct timing_threshod {
 257         const unsigned int      max_chip_count;
 258         const unsigned int      max_data_setup_cycles;
 259         const unsigned int      internal_data_setup_in_ns;
 260         const unsigned int      max_sample_delay_factor;
 261         const unsigned int      max_dll_clock_period_in_ns;
 262         const unsigned int      max_dll_delay_in_ns;
 263         unsigned long           clock_frequency_in_hz;
 264
 265 };
 266
 267 /* Common Services */
 268 extern int common_nfc_set_geometry(struct gpmi_nand_data *);
 269 extern struct dma_chan *get_dma_chan(struct gpmi_nand_data *);
 270 extern void prepare_data_dma(struct gpmi_nand_data *,
 271                                 enum dma_data_direction dr);
 272 extern int start_dma_without_bch_irq(struct gpmi_nand_data *,
 273                                 struct dma_async_tx_descriptor *);
 274 extern int start_dma_with_bch_irq(struct gpmi_nand_data *,
 275                                 struct dma_async_tx_descriptor *);
 276
 277 /* GPMI-NAND helper function library */
 278 extern int gpmi_init(struct gpmi_nand_data *);
 279 extern int gpmi_extra_init(struct gpmi_nand_data *);
 280 extern void gpmi_clear_bch(struct gpmi_nand_data *);
 281 extern void gpmi_dump_info(struct gpmi_nand_data *);
 282 extern int bch_set_geometry(struct gpmi_nand_data *);
 283 extern int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip);
 284 extern int gpmi_send_command(struct gpmi_nand_data *);
 285 extern void gpmi_begin(struct gpmi_nand_data *);
 286 extern void gpmi_end(struct gpmi_nand_data *);
 287 extern int gpmi_read_data(struct gpmi_nand_data *);
 288 extern int gpmi_send_data(struct gpmi_nand_data *);
 289 extern int gpmi_send_page(struct gpmi_nand_data *,
 290                         dma_addr_t payload, dma_addr_t auxiliary);
 291 extern int gpmi_read_page(struct gpmi_nand_data *,
 292                         dma_addr_t payload, dma_addr_t auxiliary);
 293
 294 void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
 295                     const u8 *src, size_t src_bit_off,
 296                     size_t nbits);
 297
 298 /* BCH : Status Block Completion Codes */
 299 #define STATUS_GOOD             0x00
 300 #define STATUS_ERASED           0xff
 301 #define STATUS_UNCORRECTABLE    0xfe
 302
 303 /* Use the devdata to distinguish different Archs. */
 304 #define GPMI_IS_MX23(x)         ((x)->devdata->type == IS_MX23)
 305 #define GPMI_IS_MX28(x)         ((x)->devdata->type == IS_MX28)
 306 #define GPMI_IS_MX6Q(x)         ((x)->devdata->type == IS_MX6Q)
 307 #define GPMI_IS_MX6SX(x)        ((x)->devdata->type == IS_MX6SX)
 308
 309 #define GPMI_IS_MX6(x)          (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
 310 #endif