Merge remote-tracking branch 'asoc/topic/tlv320aic26' into asoc-next
[deliverable/linux.git] / drivers / mtd / nand / nand_bbt.c
1 /*
2 * drivers/mtd/nand_bbt.c
3 *
4 * Overview:
5 * Bad block table support for the NAND driver
6 *
7 * Copyright © 2004 Thomas Gleixner (tglx@linutronix.de)
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 * Description:
14 *
15 * When nand_scan_bbt is called, then it tries to find the bad block table
16 * depending on the options in the BBT descriptor(s). If no flash based BBT
17 * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory
18 * marked good / bad blocks. This information is used to create a memory BBT.
19 * Once a new bad block is discovered then the "factory" information is updated
20 * on the device.
21 * If a flash based BBT is specified then the function first tries to find the
22 * BBT on flash. If a BBT is found then the contents are read and the memory
23 * based BBT is created. If a mirrored BBT is selected then the mirror is
24 * searched too and the versions are compared. If the mirror has a greater
25 * version number, then the mirror BBT is used to build the memory based BBT.
26 * If the tables are not versioned, then we "or" the bad block information.
27 * If one of the BBTs is out of date or does not exist it is (re)created.
28 * If no BBT exists at all then the device is scanned for factory marked
29 * good / bad blocks and the bad block tables are created.
30 *
31 * For manufacturer created BBTs like the one found on M-SYS DOC devices
32 * the BBT is searched and read but never created
33 *
34 * The auto generated bad block table is located in the last good blocks
35 * of the device. The table is mirrored, so it can be updated eventually.
36 * The table is marked in the OOB area with an ident pattern and a version
37 * number which indicates which of both tables is more up to date. If the NAND
38 * controller needs the complete OOB area for the ECC information then the
39 * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of
40 * course): it moves the ident pattern and the version byte into the data area
41 * and the OOB area will remain untouched.
42 *
43 * The table uses 2 bits per block
44 * 11b: block is good
45 * 00b: block is factory marked bad
46 * 01b, 10b: block is marked bad due to wear
47 *
48 * The memory bad block table uses the following scheme:
49 * 00b: block is good
50 * 01b: block is marked bad due to wear
51 * 10b: block is reserved (to protect the bbt area)
52 * 11b: block is factory marked bad
53 *
54 * Multichip devices like DOC store the bad block info per floor.
55 *
56 * Following assumptions are made:
57 * - bbts start at a page boundary, if autolocated on a block boundary
58 * - the space necessary for a bbt in FLASH does not exceed a block boundary
59 *
60 */
61
62 #include <linux/slab.h>
63 #include <linux/types.h>
64 #include <linux/mtd/mtd.h>
65 #include <linux/mtd/bbm.h>
66 #include <linux/mtd/nand.h>
67 #include <linux/mtd/nand_ecc.h>
68 #include <linux/bitops.h>
69 #include <linux/delay.h>
70 #include <linux/vmalloc.h>
71 #include <linux/export.h>
72 #include <linux/string.h>
73
74 #define BBT_BLOCK_GOOD 0x00
75 #define BBT_BLOCK_WORN 0x01
76 #define BBT_BLOCK_RESERVED 0x02
77 #define BBT_BLOCK_FACTORY_BAD 0x03
78
79 #define BBT_ENTRY_MASK 0x03
80 #define BBT_ENTRY_SHIFT 2
81
82 static int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
83
84 static inline uint8_t bbt_get_entry(struct nand_chip *chip, int block)
85 {
86 uint8_t entry = chip->bbt[block >> BBT_ENTRY_SHIFT];
87 entry >>= (block & BBT_ENTRY_MASK) * 2;
88 return entry & BBT_ENTRY_MASK;
89 }
90
91 static inline void bbt_mark_entry(struct nand_chip *chip, int block,
92 uint8_t mark)
93 {
94 uint8_t msk = (mark & BBT_ENTRY_MASK) << ((block & BBT_ENTRY_MASK) * 2);
95 chip->bbt[block >> BBT_ENTRY_SHIFT] |= msk;
96 }
97
98 static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
99 {
100 if (memcmp(buf, td->pattern, td->len))
101 return -1;
102 return 0;
103 }
104
105 /**
106 * check_pattern - [GENERIC] check if a pattern is in the buffer
107 * @buf: the buffer to search
108 * @len: the length of buffer to search
109 * @paglen: the pagelength
110 * @td: search pattern descriptor
111 *
112 * Check for a pattern at the given place. Used to search bad block tables and
113 * good / bad block identifiers.
114 */
115 static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
116 {
117 if (td->options & NAND_BBT_NO_OOB)
118 return check_pattern_no_oob(buf, td);
119
120 /* Compare the pattern */
121 if (memcmp(buf + paglen + td->offs, td->pattern, td->len))
122 return -1;
123
124 return 0;
125 }
126
127 /**
128 * check_short_pattern - [GENERIC] check if a pattern is in the buffer
129 * @buf: the buffer to search
130 * @td: search pattern descriptor
131 *
132 * Check for a pattern at the given place. Used to search bad block tables and
133 * good / bad block identifiers. Same as check_pattern, but no optional empty
134 * check.
135 */
136 static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
137 {
138 /* Compare the pattern */
139 if (memcmp(buf + td->offs, td->pattern, td->len))
140 return -1;
141 return 0;
142 }
143
144 /**
145 * add_marker_len - compute the length of the marker in data area
146 * @td: BBT descriptor used for computation
147 *
148 * The length will be 0 if the marker is located in OOB area.
149 */
150 static u32 add_marker_len(struct nand_bbt_descr *td)
151 {
152 u32 len;
153
154 if (!(td->options & NAND_BBT_NO_OOB))
155 return 0;
156
157 len = td->len;
158 if (td->options & NAND_BBT_VERSION)
159 len++;
160 return len;
161 }
162
163 /**
164 * read_bbt - [GENERIC] Read the bad block table starting from page
165 * @mtd: MTD device structure
166 * @buf: temporary buffer
167 * @page: the starting page
168 * @num: the number of bbt descriptors to read
169 * @td: the bbt describtion table
170 * @offs: block number offset in the table
171 *
172 * Read the bad block table starting from page.
173 */
174 static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
175 struct nand_bbt_descr *td, int offs)
176 {
177 int res, ret = 0, i, j, act = 0;
178 struct nand_chip *this = mtd->priv;
179 size_t retlen, len, totlen;
180 loff_t from;
181 int bits = td->options & NAND_BBT_NRBITS_MSK;
182 uint8_t msk = (uint8_t)((1 << bits) - 1);
183 u32 marker_len;
184 int reserved_block_code = td->reserved_block_code;
185
186 totlen = (num * bits) >> 3;
187 marker_len = add_marker_len(td);
188 from = ((loff_t)page) << this->page_shift;
189
190 while (totlen) {
191 len = min(totlen, (size_t)(1 << this->bbt_erase_shift));
192 if (marker_len) {
193 /*
194 * In case the BBT marker is not in the OOB area it
195 * will be just in the first page.
196 */
197 len -= marker_len;
198 from += marker_len;
199 marker_len = 0;
200 }
201 res = mtd_read(mtd, from, len, &retlen, buf);
202 if (res < 0) {
203 if (mtd_is_eccerr(res)) {
204 pr_info("nand_bbt: ECC error in BBT at "
205 "0x%012llx\n", from & ~mtd->writesize);
206 return res;
207 } else if (mtd_is_bitflip(res)) {
208 pr_info("nand_bbt: corrected error in BBT at "
209 "0x%012llx\n", from & ~mtd->writesize);
210 ret = res;
211 } else {
212 pr_info("nand_bbt: error reading BBT\n");
213 return res;
214 }
215 }
216
217 /* Analyse data */
218 for (i = 0; i < len; i++) {
219 uint8_t dat = buf[i];
220 for (j = 0; j < 8; j += bits, act++) {
221 uint8_t tmp = (dat >> j) & msk;
222 if (tmp == msk)
223 continue;
224 if (reserved_block_code && (tmp == reserved_block_code)) {
225 pr_info("nand_read_bbt: reserved block at 0x%012llx\n",
226 (loff_t)(offs + act) <<
227 this->bbt_erase_shift);
228 bbt_mark_entry(this, offs + act,
229 BBT_BLOCK_RESERVED);
230 mtd->ecc_stats.bbtblocks++;
231 continue;
232 }
233 /*
234 * Leave it for now, if it's matured we can
235 * move this message to pr_debug.
236 */
237 pr_info("nand_read_bbt: bad block at 0x%012llx\n",
238 (loff_t)(offs + act) <<
239 this->bbt_erase_shift);
240 /* Factory marked bad or worn out? */
241 if (tmp == 0)
242 bbt_mark_entry(this, offs + act,
243 BBT_BLOCK_FACTORY_BAD);
244 else
245 bbt_mark_entry(this, offs + act,
246 BBT_BLOCK_WORN);
247 mtd->ecc_stats.badblocks++;
248 }
249 }
250 totlen -= len;
251 from += len;
252 }
253 return ret;
254 }
255
256 /**
257 * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
258 * @mtd: MTD device structure
259 * @buf: temporary buffer
260 * @td: descriptor for the bad block table
261 * @chip: read the table for a specific chip, -1 read all chips; applies only if
262 * NAND_BBT_PERCHIP option is set
263 *
264 * Read the bad block table for all chips starting at a given page. We assume
265 * that the bbt bits are in consecutive order.
266 */
267 static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
268 {
269 struct nand_chip *this = mtd->priv;
270 int res = 0, i;
271
272 if (td->options & NAND_BBT_PERCHIP) {
273 int offs = 0;
274 for (i = 0; i < this->numchips; i++) {
275 if (chip == -1 || chip == i)
276 res = read_bbt(mtd, buf, td->pages[i],
277 this->chipsize >> this->bbt_erase_shift,
278 td, offs);
279 if (res)
280 return res;
281 offs += this->chipsize >> this->bbt_erase_shift;
282 }
283 } else {
284 res = read_bbt(mtd, buf, td->pages[0],
285 mtd->size >> this->bbt_erase_shift, td, 0);
286 if (res)
287 return res;
288 }
289 return 0;
290 }
291
292 /* BBT marker is in the first page, no OOB */
293 static int scan_read_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
294 struct nand_bbt_descr *td)
295 {
296 size_t retlen;
297 size_t len;
298
299 len = td->len;
300 if (td->options & NAND_BBT_VERSION)
301 len++;
302
303 return mtd_read(mtd, offs, len, &retlen, buf);
304 }
305
306 /**
307 * scan_read_oob - [GENERIC] Scan data+OOB region to buffer
308 * @mtd: MTD device structure
309 * @buf: temporary buffer
310 * @offs: offset at which to scan
311 * @len: length of data region to read
312 *
313 * Scan read data from data+OOB. May traverse multiple pages, interleaving
314 * page,OOB,page,OOB,... in buf. Completes transfer and returns the "strongest"
315 * ECC condition (error or bitflip). May quit on the first (non-ECC) error.
316 */
317 static int scan_read_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
318 size_t len)
319 {
320 struct mtd_oob_ops ops;
321 int res, ret = 0;
322
323 ops.mode = MTD_OPS_PLACE_OOB;
324 ops.ooboffs = 0;
325 ops.ooblen = mtd->oobsize;
326
327 while (len > 0) {
328 ops.datbuf = buf;
329 ops.len = min(len, (size_t)mtd->writesize);
330 ops.oobbuf = buf + ops.len;
331
332 res = mtd_read_oob(mtd, offs, &ops);
333 if (res) {
334 if (!mtd_is_bitflip_or_eccerr(res))
335 return res;
336 else if (mtd_is_eccerr(res) || !ret)
337 ret = res;
338 }
339
340 buf += mtd->oobsize + mtd->writesize;
341 len -= mtd->writesize;
342 offs += mtd->writesize;
343 }
344 return ret;
345 }
346
347 static int scan_read(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
348 size_t len, struct nand_bbt_descr *td)
349 {
350 if (td->options & NAND_BBT_NO_OOB)
351 return scan_read_data(mtd, buf, offs, td);
352 else
353 return scan_read_oob(mtd, buf, offs, len);
354 }
355
356 /* Scan write data with oob to flash */
357 static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
358 uint8_t *buf, uint8_t *oob)
359 {
360 struct mtd_oob_ops ops;
361
362 ops.mode = MTD_OPS_PLACE_OOB;
363 ops.ooboffs = 0;
364 ops.ooblen = mtd->oobsize;
365 ops.datbuf = buf;
366 ops.oobbuf = oob;
367 ops.len = len;
368
369 return mtd_write_oob(mtd, offs, &ops);
370 }
371
372 static u32 bbt_get_ver_offs(struct mtd_info *mtd, struct nand_bbt_descr *td)
373 {
374 u32 ver_offs = td->veroffs;
375
376 if (!(td->options & NAND_BBT_NO_OOB))
377 ver_offs += mtd->writesize;
378 return ver_offs;
379 }
380
381 /**
382 * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
383 * @mtd: MTD device structure
384 * @buf: temporary buffer
385 * @td: descriptor for the bad block table
386 * @md: descriptor for the bad block table mirror
387 *
388 * Read the bad block table(s) for all chips starting at a given page. We
389 * assume that the bbt bits are in consecutive order.
390 */
391 static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
392 struct nand_bbt_descr *td, struct nand_bbt_descr *md)
393 {
394 struct nand_chip *this = mtd->priv;
395
396 /* Read the primary version, if available */
397 if (td->options & NAND_BBT_VERSION) {
398 scan_read(mtd, buf, (loff_t)td->pages[0] << this->page_shift,
399 mtd->writesize, td);
400 td->version[0] = buf[bbt_get_ver_offs(mtd, td)];
401 pr_info("Bad block table at page %d, version 0x%02X\n",
402 td->pages[0], td->version[0]);
403 }
404
405 /* Read the mirror version, if available */
406 if (md && (md->options & NAND_BBT_VERSION)) {
407 scan_read(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
408 mtd->writesize, md);
409 md->version[0] = buf[bbt_get_ver_offs(mtd, md)];
410 pr_info("Bad block table at page %d, version 0x%02X\n",
411 md->pages[0], md->version[0]);
412 }
413 }
414
415 /* Scan a given block full */
416 static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd,
417 loff_t offs, uint8_t *buf, size_t readlen,
418 int scanlen, int numpages)
419 {
420 int ret, j;
421
422 ret = scan_read_oob(mtd, buf, offs, readlen);
423 /* Ignore ECC errors when checking for BBM */
424 if (ret && !mtd_is_bitflip_or_eccerr(ret))
425 return ret;
426
427 for (j = 0; j < numpages; j++, buf += scanlen) {
428 if (check_pattern(buf, scanlen, mtd->writesize, bd))
429 return 1;
430 }
431 return 0;
432 }
433
434 /* Scan a given block partially */
435 static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
436 loff_t offs, uint8_t *buf, int numpages)
437 {
438 struct mtd_oob_ops ops;
439 int j, ret;
440
441 ops.ooblen = mtd->oobsize;
442 ops.oobbuf = buf;
443 ops.ooboffs = 0;
444 ops.datbuf = NULL;
445 ops.mode = MTD_OPS_PLACE_OOB;
446
447 for (j = 0; j < numpages; j++) {
448 /*
449 * Read the full oob until read_oob is fixed to handle single
450 * byte reads for 16 bit buswidth.
451 */
452 ret = mtd_read_oob(mtd, offs, &ops);
453 /* Ignore ECC errors when checking for BBM */
454 if (ret && !mtd_is_bitflip_or_eccerr(ret))
455 return ret;
456
457 if (check_short_pattern(buf, bd))
458 return 1;
459
460 offs += mtd->writesize;
461 }
462 return 0;
463 }
464
465 /**
466 * create_bbt - [GENERIC] Create a bad block table by scanning the device
467 * @mtd: MTD device structure
468 * @buf: temporary buffer
469 * @bd: descriptor for the good/bad block search pattern
470 * @chip: create the table for a specific chip, -1 read all chips; applies only
471 * if NAND_BBT_PERCHIP option is set
472 *
473 * Create a bad block table by scanning the device for the given good/bad block
474 * identify pattern.
475 */
476 static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
477 struct nand_bbt_descr *bd, int chip)
478 {
479 struct nand_chip *this = mtd->priv;
480 int i, numblocks, numpages, scanlen;
481 int startblock;
482 loff_t from;
483 size_t readlen;
484
485 pr_info("Scanning device for bad blocks\n");
486
487 if (bd->options & NAND_BBT_SCANALLPAGES)
488 numpages = 1 << (this->bbt_erase_shift - this->page_shift);
489 else if (bd->options & NAND_BBT_SCAN2NDPAGE)
490 numpages = 2;
491 else
492 numpages = 1;
493
494 /* We need only read few bytes from the OOB area */
495 scanlen = 0;
496 readlen = bd->len;
497
498 if (chip == -1) {
499 numblocks = mtd->size >> this->bbt_erase_shift;
500 startblock = 0;
501 from = 0;
502 } else {
503 if (chip >= this->numchips) {
504 pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",
505 chip + 1, this->numchips);
506 return -EINVAL;
507 }
508 numblocks = this->chipsize >> this->bbt_erase_shift;
509 startblock = chip * numblocks;
510 numblocks += startblock;
511 from = (loff_t)startblock << this->bbt_erase_shift;
512 }
513
514 if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
515 from += mtd->erasesize - (mtd->writesize * numpages);
516
517 for (i = startblock; i < numblocks; i++) {
518 int ret;
519
520 BUG_ON(bd->options & NAND_BBT_NO_OOB);
521
522 if (bd->options & NAND_BBT_SCANALLPAGES)
523 ret = scan_block_full(mtd, bd, from, buf, readlen,
524 scanlen, numpages);
525 else
526 ret = scan_block_fast(mtd, bd, from, buf, numpages);
527
528 if (ret < 0)
529 return ret;
530
531 if (ret) {
532 bbt_mark_entry(this, i, BBT_BLOCK_FACTORY_BAD);
533 pr_warn("Bad eraseblock %d at 0x%012llx\n",
534 i, (unsigned long long)from);
535 mtd->ecc_stats.badblocks++;
536 }
537
538 from += (1 << this->bbt_erase_shift);
539 }
540 return 0;
541 }
542
543 /**
544 * search_bbt - [GENERIC] scan the device for a specific bad block table
545 * @mtd: MTD device structure
546 * @buf: temporary buffer
547 * @td: descriptor for the bad block table
548 *
549 * Read the bad block table by searching for a given ident pattern. Search is
550 * preformed either from the beginning up or from the end of the device
551 * downwards. The search starts always at the start of a block. If the option
552 * NAND_BBT_PERCHIP is given, each chip is searched for a bbt, which contains
553 * the bad block information of this chip. This is necessary to provide support
554 * for certain DOC devices.
555 *
556 * The bbt ident pattern resides in the oob area of the first page in a block.
557 */
558 static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
559 {
560 struct nand_chip *this = mtd->priv;
561 int i, chips;
562 int bits, startblock, block, dir;
563 int scanlen = mtd->writesize + mtd->oobsize;
564 int bbtblocks;
565 int blocktopage = this->bbt_erase_shift - this->page_shift;
566
567 /* Search direction top -> down? */
568 if (td->options & NAND_BBT_LASTBLOCK) {
569 startblock = (mtd->size >> this->bbt_erase_shift) - 1;
570 dir = -1;
571 } else {
572 startblock = 0;
573 dir = 1;
574 }
575
576 /* Do we have a bbt per chip? */
577 if (td->options & NAND_BBT_PERCHIP) {
578 chips = this->numchips;
579 bbtblocks = this->chipsize >> this->bbt_erase_shift;
580 startblock &= bbtblocks - 1;
581 } else {
582 chips = 1;
583 bbtblocks = mtd->size >> this->bbt_erase_shift;
584 }
585
586 /* Number of bits for each erase block in the bbt */
587 bits = td->options & NAND_BBT_NRBITS_MSK;
588
589 for (i = 0; i < chips; i++) {
590 /* Reset version information */
591 td->version[i] = 0;
592 td->pages[i] = -1;
593 /* Scan the maximum number of blocks */
594 for (block = 0; block < td->maxblocks; block++) {
595
596 int actblock = startblock + dir * block;
597 loff_t offs = (loff_t)actblock << this->bbt_erase_shift;
598
599 /* Read first page */
600 scan_read(mtd, buf, offs, mtd->writesize, td);
601 if (!check_pattern(buf, scanlen, mtd->writesize, td)) {
602 td->pages[i] = actblock << blocktopage;
603 if (td->options & NAND_BBT_VERSION) {
604 offs = bbt_get_ver_offs(mtd, td);
605 td->version[i] = buf[offs];
606 }
607 break;
608 }
609 }
610 startblock += this->chipsize >> this->bbt_erase_shift;
611 }
612 /* Check, if we found a bbt for each requested chip */
613 for (i = 0; i < chips; i++) {
614 if (td->pages[i] == -1)
615 pr_warn("Bad block table not found for chip %d\n", i);
616 else
617 pr_info("Bad block table found at page %d, version "
618 "0x%02X\n", td->pages[i], td->version[i]);
619 }
620 return 0;
621 }
622
623 /**
624 * search_read_bbts - [GENERIC] scan the device for bad block table(s)
625 * @mtd: MTD device structure
626 * @buf: temporary buffer
627 * @td: descriptor for the bad block table
628 * @md: descriptor for the bad block table mirror
629 *
630 * Search and read the bad block table(s).
631 */
632 static void search_read_bbts(struct mtd_info *mtd, uint8_t *buf,
633 struct nand_bbt_descr *td,
634 struct nand_bbt_descr *md)
635 {
636 /* Search the primary table */
637 search_bbt(mtd, buf, td);
638
639 /* Search the mirror table */
640 if (md)
641 search_bbt(mtd, buf, md);
642 }
643
644 /**
645 * write_bbt - [GENERIC] (Re)write the bad block table
646 * @mtd: MTD device structure
647 * @buf: temporary buffer
648 * @td: descriptor for the bad block table
649 * @md: descriptor for the bad block table mirror
650 * @chipsel: selector for a specific chip, -1 for all
651 *
652 * (Re)write the bad block table.
653 */
654 static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
655 struct nand_bbt_descr *td, struct nand_bbt_descr *md,
656 int chipsel)
657 {
658 struct nand_chip *this = mtd->priv;
659 struct erase_info einfo;
660 int i, res, chip = 0;
661 int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
662 int nrchips, pageoffs, ooboffs;
663 uint8_t msk[4];
664 uint8_t rcode = td->reserved_block_code;
665 size_t retlen, len = 0;
666 loff_t to;
667 struct mtd_oob_ops ops;
668
669 ops.ooblen = mtd->oobsize;
670 ops.ooboffs = 0;
671 ops.datbuf = NULL;
672 ops.mode = MTD_OPS_PLACE_OOB;
673
674 if (!rcode)
675 rcode = 0xff;
676 /* Write bad block table per chip rather than per device? */
677 if (td->options & NAND_BBT_PERCHIP) {
678 numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
679 /* Full device write or specific chip? */
680 if (chipsel == -1) {
681 nrchips = this->numchips;
682 } else {
683 nrchips = chipsel + 1;
684 chip = chipsel;
685 }
686 } else {
687 numblocks = (int)(mtd->size >> this->bbt_erase_shift);
688 nrchips = 1;
689 }
690
691 /* Loop through the chips */
692 for (; chip < nrchips; chip++) {
693 /*
694 * There was already a version of the table, reuse the page
695 * This applies for absolute placement too, as we have the
696 * page nr. in td->pages.
697 */
698 if (td->pages[chip] != -1) {
699 page = td->pages[chip];
700 goto write;
701 }
702
703 /*
704 * Automatic placement of the bad block table. Search direction
705 * top -> down?
706 */
707 if (td->options & NAND_BBT_LASTBLOCK) {
708 startblock = numblocks * (chip + 1) - 1;
709 dir = -1;
710 } else {
711 startblock = chip * numblocks;
712 dir = 1;
713 }
714
715 for (i = 0; i < td->maxblocks; i++) {
716 int block = startblock + dir * i;
717 /* Check, if the block is bad */
718 switch (bbt_get_entry(this, block)) {
719 case BBT_BLOCK_WORN:
720 case BBT_BLOCK_FACTORY_BAD:
721 continue;
722 }
723 page = block <<
724 (this->bbt_erase_shift - this->page_shift);
725 /* Check, if the block is used by the mirror table */
726 if (!md || md->pages[chip] != page)
727 goto write;
728 }
729 pr_err("No space left to write bad block table\n");
730 return -ENOSPC;
731 write:
732
733 /* Set up shift count and masks for the flash table */
734 bits = td->options & NAND_BBT_NRBITS_MSK;
735 msk[2] = ~rcode;
736 switch (bits) {
737 case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01;
738 msk[3] = 0x01;
739 break;
740 case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01;
741 msk[3] = 0x03;
742 break;
743 case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C;
744 msk[3] = 0x0f;
745 break;
746 case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F;
747 msk[3] = 0xff;
748 break;
749 default: return -EINVAL;
750 }
751
752 to = ((loff_t)page) << this->page_shift;
753
754 /* Must we save the block contents? */
755 if (td->options & NAND_BBT_SAVECONTENT) {
756 /* Make it block aligned */
757 to &= ~((loff_t)((1 << this->bbt_erase_shift) - 1));
758 len = 1 << this->bbt_erase_shift;
759 res = mtd_read(mtd, to, len, &retlen, buf);
760 if (res < 0) {
761 if (retlen != len) {
762 pr_info("nand_bbt: error reading block "
763 "for writing the bad block table\n");
764 return res;
765 }
766 pr_warn("nand_bbt: ECC error while reading "
767 "block for writing bad block table\n");
768 }
769 /* Read oob data */
770 ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
771 ops.oobbuf = &buf[len];
772 res = mtd_read_oob(mtd, to + mtd->writesize, &ops);
773 if (res < 0 || ops.oobretlen != ops.ooblen)
774 goto outerr;
775
776 /* Calc the byte offset in the buffer */
777 pageoffs = page - (int)(to >> this->page_shift);
778 offs = pageoffs << this->page_shift;
779 /* Preset the bbt area with 0xff */
780 memset(&buf[offs], 0xff, (size_t)(numblocks >> sft));
781 ooboffs = len + (pageoffs * mtd->oobsize);
782
783 } else if (td->options & NAND_BBT_NO_OOB) {
784 ooboffs = 0;
785 offs = td->len;
786 /* The version byte */
787 if (td->options & NAND_BBT_VERSION)
788 offs++;
789 /* Calc length */
790 len = (size_t)(numblocks >> sft);
791 len += offs;
792 /* Make it page aligned! */
793 len = ALIGN(len, mtd->writesize);
794 /* Preset the buffer with 0xff */
795 memset(buf, 0xff, len);
796 /* Pattern is located at the begin of first page */
797 memcpy(buf, td->pattern, td->len);
798 } else {
799 /* Calc length */
800 len = (size_t)(numblocks >> sft);
801 /* Make it page aligned! */
802 len = ALIGN(len, mtd->writesize);
803 /* Preset the buffer with 0xff */
804 memset(buf, 0xff, len +
805 (len >> this->page_shift)* mtd->oobsize);
806 offs = 0;
807 ooboffs = len;
808 /* Pattern is located in oob area of first page */
809 memcpy(&buf[ooboffs + td->offs], td->pattern, td->len);
810 }
811
812 if (td->options & NAND_BBT_VERSION)
813 buf[ooboffs + td->veroffs] = td->version[chip];
814
815 /* Walk through the memory table */
816 for (i = 0; i < numblocks; i++) {
817 uint8_t dat;
818 int sftcnt = (i << (3 - sft)) & sftmsk;
819 dat = bbt_get_entry(this, chip * numblocks + i);
820 /* Do not store the reserved bbt blocks! */
821 buf[offs + (i >> sft)] &= ~(msk[dat] << sftcnt);
822 }
823
824 memset(&einfo, 0, sizeof(einfo));
825 einfo.mtd = mtd;
826 einfo.addr = to;
827 einfo.len = 1 << this->bbt_erase_shift;
828 res = nand_erase_nand(mtd, &einfo, 1);
829 if (res < 0)
830 goto outerr;
831
832 res = scan_write_bbt(mtd, to, len, buf,
833 td->options & NAND_BBT_NO_OOB ? NULL :
834 &buf[len]);
835 if (res < 0)
836 goto outerr;
837
838 pr_info("Bad block table written to 0x%012llx, version 0x%02X\n",
839 (unsigned long long)to, td->version[chip]);
840
841 /* Mark it as used */
842 td->pages[chip] = page;
843 }
844 return 0;
845
846 outerr:
847 pr_warn("nand_bbt: error while writing bad block table %d\n", res);
848 return res;
849 }
850
851 /**
852 * nand_memory_bbt - [GENERIC] create a memory based bad block table
853 * @mtd: MTD device structure
854 * @bd: descriptor for the good/bad block search pattern
855 *
856 * The function creates a memory based bbt by scanning the device for
857 * manufacturer / software marked good / bad blocks.
858 */
859 static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
860 {
861 struct nand_chip *this = mtd->priv;
862
863 return create_bbt(mtd, this->buffers->databuf, bd, -1);
864 }
865
866 /**
867 * check_create - [GENERIC] create and write bbt(s) if necessary
868 * @mtd: MTD device structure
869 * @buf: temporary buffer
870 * @bd: descriptor for the good/bad block search pattern
871 *
872 * The function checks the results of the previous call to read_bbt and creates
873 * / updates the bbt(s) if necessary. Creation is necessary if no bbt was found
874 * for the chip/device. Update is necessary if one of the tables is missing or
875 * the version nr. of one table is less than the other.
876 */
877 static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
878 {
879 int i, chips, writeops, create, chipsel, res, res2;
880 struct nand_chip *this = mtd->priv;
881 struct nand_bbt_descr *td = this->bbt_td;
882 struct nand_bbt_descr *md = this->bbt_md;
883 struct nand_bbt_descr *rd, *rd2;
884
885 /* Do we have a bbt per chip? */
886 if (td->options & NAND_BBT_PERCHIP)
887 chips = this->numchips;
888 else
889 chips = 1;
890
891 for (i = 0; i < chips; i++) {
892 writeops = 0;
893 create = 0;
894 rd = NULL;
895 rd2 = NULL;
896 res = res2 = 0;
897 /* Per chip or per device? */
898 chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
899 /* Mirrored table available? */
900 if (md) {
901 if (td->pages[i] == -1 && md->pages[i] == -1) {
902 create = 1;
903 writeops = 0x03;
904 } else if (td->pages[i] == -1) {
905 rd = md;
906 writeops = 0x01;
907 } else if (md->pages[i] == -1) {
908 rd = td;
909 writeops = 0x02;
910 } else if (td->version[i] == md->version[i]) {
911 rd = td;
912 if (!(td->options & NAND_BBT_VERSION))
913 rd2 = md;
914 } else if (((int8_t)(td->version[i] - md->version[i])) > 0) {
915 rd = td;
916 writeops = 0x02;
917 } else {
918 rd = md;
919 writeops = 0x01;
920 }
921 } else {
922 if (td->pages[i] == -1) {
923 create = 1;
924 writeops = 0x01;
925 } else {
926 rd = td;
927 }
928 }
929
930 if (create) {
931 /* Create the bad block table by scanning the device? */
932 if (!(td->options & NAND_BBT_CREATE))
933 continue;
934
935 /* Create the table in memory by scanning the chip(s) */
936 if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
937 create_bbt(mtd, buf, bd, chipsel);
938
939 td->version[i] = 1;
940 if (md)
941 md->version[i] = 1;
942 }
943
944 /* Read back first? */
945 if (rd) {
946 res = read_abs_bbt(mtd, buf, rd, chipsel);
947 if (mtd_is_eccerr(res)) {
948 /* Mark table as invalid */
949 rd->pages[i] = -1;
950 rd->version[i] = 0;
951 i--;
952 continue;
953 }
954 }
955 /* If they weren't versioned, read both */
956 if (rd2) {
957 res2 = read_abs_bbt(mtd, buf, rd2, chipsel);
958 if (mtd_is_eccerr(res2)) {
959 /* Mark table as invalid */
960 rd2->pages[i] = -1;
961 rd2->version[i] = 0;
962 i--;
963 continue;
964 }
965 }
966
967 /* Scrub the flash table(s)? */
968 if (mtd_is_bitflip(res) || mtd_is_bitflip(res2))
969 writeops = 0x03;
970
971 /* Update version numbers before writing */
972 if (md) {
973 td->version[i] = max(td->version[i], md->version[i]);
974 md->version[i] = td->version[i];
975 }
976
977 /* Write the bad block table to the device? */
978 if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
979 res = write_bbt(mtd, buf, td, md, chipsel);
980 if (res < 0)
981 return res;
982 }
983
984 /* Write the mirror bad block table to the device? */
985 if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
986 res = write_bbt(mtd, buf, md, td, chipsel);
987 if (res < 0)
988 return res;
989 }
990 }
991 return 0;
992 }
993
994 /**
995 * mark_bbt_regions - [GENERIC] mark the bad block table regions
996 * @mtd: MTD device structure
997 * @td: bad block table descriptor
998 *
999 * The bad block table regions are marked as "bad" to prevent accidental
1000 * erasures / writes. The regions are identified by the mark 0x02.
1001 */
1002 static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
1003 {
1004 struct nand_chip *this = mtd->priv;
1005 int i, j, chips, block, nrblocks, update;
1006 uint8_t oldval;
1007
1008 /* Do we have a bbt per chip? */
1009 if (td->options & NAND_BBT_PERCHIP) {
1010 chips = this->numchips;
1011 nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
1012 } else {
1013 chips = 1;
1014 nrblocks = (int)(mtd->size >> this->bbt_erase_shift);
1015 }
1016
1017 for (i = 0; i < chips; i++) {
1018 if ((td->options & NAND_BBT_ABSPAGE) ||
1019 !(td->options & NAND_BBT_WRITE)) {
1020 if (td->pages[i] == -1)
1021 continue;
1022 block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
1023 oldval = bbt_get_entry(this, block);
1024 bbt_mark_entry(this, block, BBT_BLOCK_RESERVED);
1025 if ((oldval != BBT_BLOCK_RESERVED) &&
1026 td->reserved_block_code)
1027 nand_update_bbt(mtd, (loff_t)block <<
1028 this->bbt_erase_shift);
1029 continue;
1030 }
1031 update = 0;
1032 if (td->options & NAND_BBT_LASTBLOCK)
1033 block = ((i + 1) * nrblocks) - td->maxblocks;
1034 else
1035 block = i * nrblocks;
1036 for (j = 0; j < td->maxblocks; j++) {
1037 oldval = bbt_get_entry(this, block);
1038 bbt_mark_entry(this, block, BBT_BLOCK_RESERVED);
1039 if (oldval != BBT_BLOCK_RESERVED)
1040 update = 1;
1041 block++;
1042 }
1043 /*
1044 * If we want reserved blocks to be recorded to flash, and some
1045 * new ones have been marked, then we need to update the stored
1046 * bbts. This should only happen once.
1047 */
1048 if (update && td->reserved_block_code)
1049 nand_update_bbt(mtd, (loff_t)(block - 1) <<
1050 this->bbt_erase_shift);
1051 }
1052 }
1053
1054 /**
1055 * verify_bbt_descr - verify the bad block description
1056 * @mtd: MTD device structure
1057 * @bd: the table to verify
1058 *
1059 * This functions performs a few sanity checks on the bad block description
1060 * table.
1061 */
1062 static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
1063 {
1064 struct nand_chip *this = mtd->priv;
1065 u32 pattern_len;
1066 u32 bits;
1067 u32 table_size;
1068
1069 if (!bd)
1070 return;
1071
1072 pattern_len = bd->len;
1073 bits = bd->options & NAND_BBT_NRBITS_MSK;
1074
1075 BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) &&
1076 !(this->bbt_options & NAND_BBT_USE_FLASH));
1077 BUG_ON(!bits);
1078
1079 if (bd->options & NAND_BBT_VERSION)
1080 pattern_len++;
1081
1082 if (bd->options & NAND_BBT_NO_OOB) {
1083 BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH));
1084 BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB));
1085 BUG_ON(bd->offs);
1086 if (bd->options & NAND_BBT_VERSION)
1087 BUG_ON(bd->veroffs != bd->len);
1088 BUG_ON(bd->options & NAND_BBT_SAVECONTENT);
1089 }
1090
1091 if (bd->options & NAND_BBT_PERCHIP)
1092 table_size = this->chipsize >> this->bbt_erase_shift;
1093 else
1094 table_size = mtd->size >> this->bbt_erase_shift;
1095 table_size >>= 3;
1096 table_size *= bits;
1097 if (bd->options & NAND_BBT_NO_OOB)
1098 table_size += pattern_len;
1099 BUG_ON(table_size > (1 << this->bbt_erase_shift));
1100 }
1101
1102 /**
1103 * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
1104 * @mtd: MTD device structure
1105 * @bd: descriptor for the good/bad block search pattern
1106 *
1107 * The function checks, if a bad block table(s) is/are already available. If
1108 * not it scans the device for manufacturer marked good / bad blocks and writes
1109 * the bad block table(s) to the selected place.
1110 *
1111 * The bad block table memory is allocated here. It must be freed by calling
1112 * the nand_free_bbt function.
1113 */
1114 int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
1115 {
1116 struct nand_chip *this = mtd->priv;
1117 int len, res = 0;
1118 uint8_t *buf;
1119 struct nand_bbt_descr *td = this->bbt_td;
1120 struct nand_bbt_descr *md = this->bbt_md;
1121
1122 len = mtd->size >> (this->bbt_erase_shift + 2);
1123 /*
1124 * Allocate memory (2bit per block) and clear the memory bad block
1125 * table.
1126 */
1127 this->bbt = kzalloc(len, GFP_KERNEL);
1128 if (!this->bbt)
1129 return -ENOMEM;
1130
1131 /*
1132 * If no primary table decriptor is given, scan the device to build a
1133 * memory based bad block table.
1134 */
1135 if (!td) {
1136 if ((res = nand_memory_bbt(mtd, bd))) {
1137 pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n");
1138 kfree(this->bbt);
1139 this->bbt = NULL;
1140 }
1141 return res;
1142 }
1143 verify_bbt_descr(mtd, td);
1144 verify_bbt_descr(mtd, md);
1145
1146 /* Allocate a temporary buffer for one eraseblock incl. oob */
1147 len = (1 << this->bbt_erase_shift);
1148 len += (len >> this->page_shift) * mtd->oobsize;
1149 buf = vmalloc(len);
1150 if (!buf) {
1151 kfree(this->bbt);
1152 this->bbt = NULL;
1153 return -ENOMEM;
1154 }
1155
1156 /* Is the bbt at a given page? */
1157 if (td->options & NAND_BBT_ABSPAGE) {
1158 read_abs_bbts(mtd, buf, td, md);
1159 } else {
1160 /* Search the bad block table using a pattern in oob */
1161 search_read_bbts(mtd, buf, td, md);
1162 }
1163
1164 res = check_create(mtd, buf, bd);
1165
1166 /* Prevent the bbt regions from erasing / writing */
1167 mark_bbt_region(mtd, td);
1168 if (md)
1169 mark_bbt_region(mtd, md);
1170
1171 vfree(buf);
1172 return res;
1173 }
1174
1175 /**
1176 * nand_update_bbt - update bad block table(s)
1177 * @mtd: MTD device structure
1178 * @offs: the offset of the newly marked block
1179 *
1180 * The function updates the bad block table(s).
1181 */
1182 static int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
1183 {
1184 struct nand_chip *this = mtd->priv;
1185 int len, res = 0;
1186 int chip, chipsel;
1187 uint8_t *buf;
1188 struct nand_bbt_descr *td = this->bbt_td;
1189 struct nand_bbt_descr *md = this->bbt_md;
1190
1191 if (!this->bbt || !td)
1192 return -EINVAL;
1193
1194 /* Allocate a temporary buffer for one eraseblock incl. oob */
1195 len = (1 << this->bbt_erase_shift);
1196 len += (len >> this->page_shift) * mtd->oobsize;
1197 buf = kmalloc(len, GFP_KERNEL);
1198 if (!buf)
1199 return -ENOMEM;
1200
1201 /* Do we have a bbt per chip? */
1202 if (td->options & NAND_BBT_PERCHIP) {
1203 chip = (int)(offs >> this->chip_shift);
1204 chipsel = chip;
1205 } else {
1206 chip = 0;
1207 chipsel = -1;
1208 }
1209
1210 td->version[chip]++;
1211 if (md)
1212 md->version[chip]++;
1213
1214 /* Write the bad block table to the device? */
1215 if (td->options & NAND_BBT_WRITE) {
1216 res = write_bbt(mtd, buf, td, md, chipsel);
1217 if (res < 0)
1218 goto out;
1219 }
1220 /* Write the mirror bad block table to the device? */
1221 if (md && (md->options & NAND_BBT_WRITE)) {
1222 res = write_bbt(mtd, buf, md, td, chipsel);
1223 }
1224
1225 out:
1226 kfree(buf);
1227 return res;
1228 }
1229
1230 /*
1231 * Define some generic bad / good block scan pattern which are used
1232 * while scanning a device for factory marked good / bad blocks.
1233 */
1234 static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
1235
1236 /* Generic flash bbt descriptors */
1237 static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
1238 static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
1239
1240 static struct nand_bbt_descr bbt_main_descr = {
1241 .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1242 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
1243 .offs = 8,
1244 .len = 4,
1245 .veroffs = 12,
1246 .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1247 .pattern = bbt_pattern
1248 };
1249
1250 static struct nand_bbt_descr bbt_mirror_descr = {
1251 .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1252 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
1253 .offs = 8,
1254 .len = 4,
1255 .veroffs = 12,
1256 .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1257 .pattern = mirror_pattern
1258 };
1259
1260 static struct nand_bbt_descr bbt_main_no_oob_descr = {
1261 .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1262 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
1263 | NAND_BBT_NO_OOB,
1264 .len = 4,
1265 .veroffs = 4,
1266 .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1267 .pattern = bbt_pattern
1268 };
1269
1270 static struct nand_bbt_descr bbt_mirror_no_oob_descr = {
1271 .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
1272 | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
1273 | NAND_BBT_NO_OOB,
1274 .len = 4,
1275 .veroffs = 4,
1276 .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
1277 .pattern = mirror_pattern
1278 };
1279
1280 #define BADBLOCK_SCAN_MASK (~NAND_BBT_NO_OOB)
1281 /**
1282 * nand_create_badblock_pattern - [INTERN] Creates a BBT descriptor structure
1283 * @this: NAND chip to create descriptor for
1284 *
1285 * This function allocates and initializes a nand_bbt_descr for BBM detection
1286 * based on the properties of @this. The new descriptor is stored in
1287 * this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
1288 * passed to this function.
1289 */
1290 static int nand_create_badblock_pattern(struct nand_chip *this)
1291 {
1292 struct nand_bbt_descr *bd;
1293 if (this->badblock_pattern) {
1294 pr_warn("Bad block pattern already allocated; not replacing\n");
1295 return -EINVAL;
1296 }
1297 bd = kzalloc(sizeof(*bd), GFP_KERNEL);
1298 if (!bd)
1299 return -ENOMEM;
1300 bd->options = this->bbt_options & BADBLOCK_SCAN_MASK;
1301 bd->offs = this->badblockpos;
1302 bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
1303 bd->pattern = scan_ff_pattern;
1304 bd->options |= NAND_BBT_DYNAMICSTRUCT;
1305 this->badblock_pattern = bd;
1306 return 0;
1307 }
1308
1309 /**
1310 * nand_default_bbt - [NAND Interface] Select a default bad block table for the device
1311 * @mtd: MTD device structure
1312 *
1313 * This function selects the default bad block table support for the device and
1314 * calls the nand_scan_bbt function.
1315 */
1316 int nand_default_bbt(struct mtd_info *mtd)
1317 {
1318 struct nand_chip *this = mtd->priv;
1319
1320 /* Is a flash based bad block table requested? */
1321 if (this->bbt_options & NAND_BBT_USE_FLASH) {
1322 /* Use the default pattern descriptors */
1323 if (!this->bbt_td) {
1324 if (this->bbt_options & NAND_BBT_NO_OOB) {
1325 this->bbt_td = &bbt_main_no_oob_descr;
1326 this->bbt_md = &bbt_mirror_no_oob_descr;
1327 } else {
1328 this->bbt_td = &bbt_main_descr;
1329 this->bbt_md = &bbt_mirror_descr;
1330 }
1331 }
1332 } else {
1333 this->bbt_td = NULL;
1334 this->bbt_md = NULL;
1335 }
1336
1337 if (!this->badblock_pattern)
1338 nand_create_badblock_pattern(this);
1339
1340 return nand_scan_bbt(mtd, this->badblock_pattern);
1341 }
1342
1343 /**
1344 * nand_isbad_bbt - [NAND Interface] Check if a block is bad
1345 * @mtd: MTD device structure
1346 * @offs: offset in the device
1347 * @allowbbt: allow access to bad block table region
1348 */
1349 int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
1350 {
1351 struct nand_chip *this = mtd->priv;
1352 int block, res;
1353
1354 block = (int)(offs >> this->bbt_erase_shift);
1355 res = bbt_get_entry(this, block);
1356
1357 pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: "
1358 "(block %d) 0x%02x\n",
1359 (unsigned int)offs, block, res);
1360
1361 switch (res) {
1362 case BBT_BLOCK_GOOD:
1363 return 0;
1364 case BBT_BLOCK_WORN:
1365 return 1;
1366 case BBT_BLOCK_RESERVED:
1367 return allowbbt ? 0 : 1;
1368 }
1369 return 1;
1370 }
1371
1372 /**
1373 * nand_markbad_bbt - [NAND Interface] Mark a block bad in the BBT
1374 * @mtd: MTD device structure
1375 * @offs: offset of the bad block
1376 */
1377 int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
1378 {
1379 struct nand_chip *this = mtd->priv;
1380 int block, ret = 0;
1381
1382 block = (int)(offs >> this->bbt_erase_shift);
1383
1384 /* Mark bad block in memory */
1385 bbt_mark_entry(this, block, BBT_BLOCK_WORN);
1386
1387 /* Update flash-based bad block table */
1388 if (this->bbt_options & NAND_BBT_USE_FLASH)
1389 ret = nand_update_bbt(mtd, offs);
1390
1391 return ret;
1392 }
1393
1394 EXPORT_SYMBOL(nand_scan_bbt);
1395 EXPORT_SYMBOL(nand_default_bbt);
This page took 0.058907 seconds and 5 git commands to generate.