mtd: onenand: samsung: add missing iounmap
[deliverable/linux.git] / drivers / mtd / nand / ppchameleonevb.c
1 /*
2 * drivers/mtd/nand/ppchameleonevb.c
3 *
4 * Copyright (C) 2003 DAVE Srl (info@wawnet.biz)
5 *
6 * Derived from drivers/mtd/nand/edb7312.c
7 *
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 * Overview:
14 * This is a device driver for the NAND flash devices found on the
15 * PPChameleon/PPChameleonEVB system.
16 * PPChameleon options (autodetected):
17 * - BA model: no NAND
18 * - ME model: 32MB (Samsung K9F5608U0B)
19 * - HI model: 128MB (Samsung K9F1G08UOM)
20 * PPChameleonEVB options:
21 * - 32MB (Samsung K9F5608U0B)
22 */
23
24 #include <linux/init.h>
25 #include <linux/slab.h>
26 #include <linux/module.h>
27 #include <linux/mtd/mtd.h>
28 #include <linux/mtd/nand.h>
29 #include <linux/mtd/partitions.h>
30 #include <asm/io.h>
31 #include <platforms/PPChameleonEVB.h>
32
33 #undef USE_READY_BUSY_PIN
34 #define USE_READY_BUSY_PIN
35 /* see datasheets (tR) */
36 #define NAND_BIG_DELAY_US 25
37 #define NAND_SMALL_DELAY_US 10
38
39 /* handy sizes */
40 #define SZ_4M 0x00400000
41 #define NAND_SMALL_SIZE 0x02000000
42 #define NAND_MTD_NAME "ppchameleon-nand"
43 #define NAND_EVB_MTD_NAME "ppchameleonevb-nand"
44
45 /* GPIO pins used to drive NAND chip mounted on processor module */
46 #define NAND_nCE_GPIO_PIN (0x80000000 >> 1)
47 #define NAND_CLE_GPIO_PIN (0x80000000 >> 2)
48 #define NAND_ALE_GPIO_PIN (0x80000000 >> 3)
49 #define NAND_RB_GPIO_PIN (0x80000000 >> 4)
50 /* GPIO pins used to drive NAND chip mounted on EVB */
51 #define NAND_EVB_nCE_GPIO_PIN (0x80000000 >> 14)
52 #define NAND_EVB_CLE_GPIO_PIN (0x80000000 >> 15)
53 #define NAND_EVB_ALE_GPIO_PIN (0x80000000 >> 16)
54 #define NAND_EVB_RB_GPIO_PIN (0x80000000 >> 31)
55
56 /*
57 * MTD structure for PPChameleonEVB board
58 */
59 static struct mtd_info *ppchameleon_mtd = NULL;
60 static struct mtd_info *ppchameleonevb_mtd = NULL;
61
62 /*
63 * Module stuff
64 */
65 static unsigned long ppchameleon_fio_pbase = CFG_NAND0_PADDR;
66 static unsigned long ppchameleonevb_fio_pbase = CFG_NAND1_PADDR;
67
68 #ifdef MODULE
69 module_param(ppchameleon_fio_pbase, ulong, 0);
70 module_param(ppchameleonevb_fio_pbase, ulong, 0);
71 #else
72 __setup("ppchameleon_fio_pbase=", ppchameleon_fio_pbase);
73 __setup("ppchameleonevb_fio_pbase=", ppchameleonevb_fio_pbase);
74 #endif
75
76 /*
77 * Define static partitions for flash devices
78 */
79 static struct mtd_partition partition_info_hi[] = {
80 { .name = "PPChameleon HI Nand Flash",
81 .offset = 0,
82 .size = 128 * 1024 * 1024
83 }
84 };
85
86 static struct mtd_partition partition_info_me[] = {
87 { .name = "PPChameleon ME Nand Flash",
88 .offset = 0,
89 .size = 32 * 1024 * 1024
90 }
91 };
92
93 static struct mtd_partition partition_info_evb[] = {
94 { .name = "PPChameleonEVB Nand Flash",
95 .offset = 0,
96 .size = 32 * 1024 * 1024
97 }
98 };
99
100 #define NUM_PARTITIONS 1
101
102 /*
103 * hardware specific access to control-lines
104 */
105 static void ppchameleon_hwcontrol(struct mtd_info *mtdinfo, int cmd,
106 unsigned int ctrl)
107 {
108 struct nand_chip *chip = mtd->priv;
109
110 if (ctrl & NAND_CTRL_CHANGE) {
111 #error Missing headerfiles. No way to fix this. -tglx
112 switch (cmd) {
113 case NAND_CTL_SETCLE:
114 MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND0_PADDR);
115 break;
116 case NAND_CTL_CLRCLE:
117 MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND0_PADDR);
118 break;
119 case NAND_CTL_SETALE:
120 MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND0_PADDR);
121 break;
122 case NAND_CTL_CLRALE:
123 MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND0_PADDR);
124 break;
125 case NAND_CTL_SETNCE:
126 MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND0_PADDR);
127 break;
128 case NAND_CTL_CLRNCE:
129 MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND0_PADDR);
130 break;
131 }
132 }
133 if (cmd != NAND_CMD_NONE)
134 writeb(cmd, chip->IO_ADDR_W);
135 }
136
137 static void ppchameleonevb_hwcontrol(struct mtd_info *mtdinfo, int cmd,
138 unsigned int ctrl)
139 {
140 struct nand_chip *chip = mtd->priv;
141
142 if (ctrl & NAND_CTRL_CHANGE) {
143 #error Missing headerfiles. No way to fix this. -tglx
144 switch (cmd) {
145 case NAND_CTL_SETCLE:
146 MACRO_NAND_CTL_SETCLE((unsigned long)CFG_NAND1_PADDR);
147 break;
148 case NAND_CTL_CLRCLE:
149 MACRO_NAND_CTL_CLRCLE((unsigned long)CFG_NAND1_PADDR);
150 break;
151 case NAND_CTL_SETALE:
152 MACRO_NAND_CTL_SETALE((unsigned long)CFG_NAND1_PADDR);
153 break;
154 case NAND_CTL_CLRALE:
155 MACRO_NAND_CTL_CLRALE((unsigned long)CFG_NAND1_PADDR);
156 break;
157 case NAND_CTL_SETNCE:
158 MACRO_NAND_ENABLE_CE((unsigned long)CFG_NAND1_PADDR);
159 break;
160 case NAND_CTL_CLRNCE:
161 MACRO_NAND_DISABLE_CE((unsigned long)CFG_NAND1_PADDR);
162 break;
163 }
164 }
165 if (cmd != NAND_CMD_NONE)
166 writeb(cmd, chip->IO_ADDR_W);
167 }
168
169 #ifdef USE_READY_BUSY_PIN
170 /*
171 * read device ready pin
172 */
173 static int ppchameleon_device_ready(struct mtd_info *minfo)
174 {
175 if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_RB_GPIO_PIN)
176 return 1;
177 return 0;
178 }
179
180 static int ppchameleonevb_device_ready(struct mtd_info *minfo)
181 {
182 if (in_be32((volatile unsigned *)GPIO0_IR) & NAND_EVB_RB_GPIO_PIN)
183 return 1;
184 return 0;
185 }
186 #endif
187
188 /*
189 * Main initialization routine
190 */
191 static int __init ppchameleonevb_init(void)
192 {
193 struct nand_chip *this;
194 void __iomem *ppchameleon_fio_base;
195 void __iomem *ppchameleonevb_fio_base;
196
197 /*********************************
198 * Processor module NAND (if any) *
199 *********************************/
200 /* Allocate memory for MTD device structure and private data */
201 ppchameleon_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
202 if (!ppchameleon_mtd) {
203 printk("Unable to allocate PPChameleon NAND MTD device structure.\n");
204 return -ENOMEM;
205 }
206
207 /* map physical address */
208 ppchameleon_fio_base = ioremap(ppchameleon_fio_pbase, SZ_4M);
209 if (!ppchameleon_fio_base) {
210 printk("ioremap PPChameleon NAND flash failed\n");
211 kfree(ppchameleon_mtd);
212 return -EIO;
213 }
214
215 /* Get pointer to private data */
216 this = (struct nand_chip *)(&ppchameleon_mtd[1]);
217
218 /* Initialize structures */
219 memset(ppchameleon_mtd, 0, sizeof(struct mtd_info));
220 memset(this, 0, sizeof(struct nand_chip));
221
222 /* Link the private data with the MTD structure */
223 ppchameleon_mtd->priv = this;
224 ppchameleon_mtd->owner = THIS_MODULE;
225
226 /* Initialize GPIOs */
227 /* Pin mapping for NAND chip */
228 /*
229 CE GPIO_01
230 CLE GPIO_02
231 ALE GPIO_03
232 R/B GPIO_04
233 */
234 /* output select */
235 out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xC0FFFFFF);
236 /* three-state select */
237 out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xC0FFFFFF);
238 /* enable output driver */
239 out_be32((volatile unsigned *)GPIO0_TCR,
240 in_be32((volatile unsigned *)GPIO0_TCR) | NAND_nCE_GPIO_PIN | NAND_CLE_GPIO_PIN | NAND_ALE_GPIO_PIN);
241 #ifdef USE_READY_BUSY_PIN
242 /* three-state select */
243 out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFF3FFFFF);
244 /* high-impedecence */
245 out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_RB_GPIO_PIN));
246 /* input select */
247 out_be32((volatile unsigned *)GPIO0_ISR1H,
248 (in_be32((volatile unsigned *)GPIO0_ISR1H) & 0xFF3FFFFF) | 0x00400000);
249 #endif
250
251 /* insert callbacks */
252 this->IO_ADDR_R = ppchameleon_fio_base;
253 this->IO_ADDR_W = ppchameleon_fio_base;
254 this->cmd_ctrl = ppchameleon_hwcontrol;
255 #ifdef USE_READY_BUSY_PIN
256 this->dev_ready = ppchameleon_device_ready;
257 #endif
258 this->chip_delay = NAND_BIG_DELAY_US;
259 /* ECC mode */
260 this->ecc.mode = NAND_ECC_SOFT;
261
262 /* Scan to find existence of the device (it could not be mounted) */
263 if (nand_scan(ppchameleon_mtd, 1)) {
264 iounmap((void *)ppchameleon_fio_base);
265 ppchameleon_fio_base = NULL;
266 kfree(ppchameleon_mtd);
267 goto nand_evb_init;
268 }
269 #ifndef USE_READY_BUSY_PIN
270 /* Adjust delay if necessary */
271 if (ppchameleon_mtd->size == NAND_SMALL_SIZE)
272 this->chip_delay = NAND_SMALL_DELAY_US;
273 #endif
274
275 ppchameleon_mtd->name = "ppchameleon-nand";
276
277 /* Register the partitions */
278 mtd_device_parse_register(ppchameleon_mtd, NULL, 0,
279 ppchameleon_mtd->size == NAND_SMALL_SIZE ?
280 partition_info_me :
281 partition_info_hi,
282 NUM_PARTITIONS);
283
284 nand_evb_init:
285 /****************************
286 * EVB NAND (always present) *
287 ****************************/
288 /* Allocate memory for MTD device structure and private data */
289 ppchameleonevb_mtd = kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
290 if (!ppchameleonevb_mtd) {
291 printk("Unable to allocate PPChameleonEVB NAND MTD device structure.\n");
292 if (ppchameleon_fio_base)
293 iounmap(ppchameleon_fio_base);
294 return -ENOMEM;
295 }
296
297 /* map physical address */
298 ppchameleonevb_fio_base = ioremap(ppchameleonevb_fio_pbase, SZ_4M);
299 if (!ppchameleonevb_fio_base) {
300 printk("ioremap PPChameleonEVB NAND flash failed\n");
301 kfree(ppchameleonevb_mtd);
302 if (ppchameleon_fio_base)
303 iounmap(ppchameleon_fio_base);
304 return -EIO;
305 }
306
307 /* Get pointer to private data */
308 this = (struct nand_chip *)(&ppchameleonevb_mtd[1]);
309
310 /* Initialize structures */
311 memset(ppchameleonevb_mtd, 0, sizeof(struct mtd_info));
312 memset(this, 0, sizeof(struct nand_chip));
313
314 /* Link the private data with the MTD structure */
315 ppchameleonevb_mtd->priv = this;
316
317 /* Initialize GPIOs */
318 /* Pin mapping for NAND chip */
319 /*
320 CE GPIO_14
321 CLE GPIO_15
322 ALE GPIO_16
323 R/B GPIO_31
324 */
325 /* output select */
326 out_be32((volatile unsigned *)GPIO0_OSRH, in_be32((volatile unsigned *)GPIO0_OSRH) & 0xFFFFFFF0);
327 out_be32((volatile unsigned *)GPIO0_OSRL, in_be32((volatile unsigned *)GPIO0_OSRL) & 0x3FFFFFFF);
328 /* three-state select */
329 out_be32((volatile unsigned *)GPIO0_TSRH, in_be32((volatile unsigned *)GPIO0_TSRH) & 0xFFFFFFF0);
330 out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0x3FFFFFFF);
331 /* enable output driver */
332 out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) | NAND_EVB_nCE_GPIO_PIN |
333 NAND_EVB_CLE_GPIO_PIN | NAND_EVB_ALE_GPIO_PIN);
334 #ifdef USE_READY_BUSY_PIN
335 /* three-state select */
336 out_be32((volatile unsigned *)GPIO0_TSRL, in_be32((volatile unsigned *)GPIO0_TSRL) & 0xFFFFFFFC);
337 /* high-impedecence */
338 out_be32((volatile unsigned *)GPIO0_TCR, in_be32((volatile unsigned *)GPIO0_TCR) & (~NAND_EVB_RB_GPIO_PIN));
339 /* input select */
340 out_be32((volatile unsigned *)GPIO0_ISR1L,
341 (in_be32((volatile unsigned *)GPIO0_ISR1L) & 0xFFFFFFFC) | 0x00000001);
342 #endif
343
344 /* insert callbacks */
345 this->IO_ADDR_R = ppchameleonevb_fio_base;
346 this->IO_ADDR_W = ppchameleonevb_fio_base;
347 this->cmd_ctrl = ppchameleonevb_hwcontrol;
348 #ifdef USE_READY_BUSY_PIN
349 this->dev_ready = ppchameleonevb_device_ready;
350 #endif
351 this->chip_delay = NAND_SMALL_DELAY_US;
352
353 /* ECC mode */
354 this->ecc.mode = NAND_ECC_SOFT;
355
356 /* Scan to find existence of the device */
357 if (nand_scan(ppchameleonevb_mtd, 1)) {
358 iounmap((void *)ppchameleonevb_fio_base);
359 kfree(ppchameleonevb_mtd);
360 if (ppchameleon_fio_base)
361 iounmap(ppchameleon_fio_base);
362 return -ENXIO;
363 }
364
365 ppchameleonevb_mtd->name = NAND_EVB_MTD_NAME;
366
367 /* Register the partitions */
368 mtd_device_parse_register(ppchameleonevb_mtd, NULL, 0,
369 ppchameleon_mtd->size == NAND_SMALL_SIZE ?
370 partition_info_me :
371 partition_info_hi,
372 NUM_PARTITIONS);
373
374 /* Return happy */
375 return 0;
376 }
377
378 module_init(ppchameleonevb_init);
379
380 /*
381 * Clean up routine
382 */
383 static void __exit ppchameleonevb_cleanup(void)
384 {
385 struct nand_chip *this;
386
387 /* Release resources, unregister device(s) */
388 nand_release(ppchameleon_mtd);
389 nand_release(ppchameleonevb_mtd);
390
391 /* Release iomaps */
392 this = (struct nand_chip *) &ppchameleon_mtd[1];
393 iounmap((void *) this->IO_ADDR_R);
394 this = (struct nand_chip *) &ppchameleonevb_mtd[1];
395 iounmap((void *) this->IO_ADDR_R);
396
397 /* Free the MTD device structure */
398 kfree (ppchameleon_mtd);
399 kfree (ppchameleonevb_mtd);
400 }
401 module_exit(ppchameleonevb_cleanup);
402
403 MODULE_LICENSE("GPL");
404 MODULE_AUTHOR("DAVE Srl <support-ppchameleon@dave-tech.it>");
405 MODULE_DESCRIPTION("MTD map driver for DAVE Srl PPChameleonEVB board");
This page took 0.050551 seconds and 5 git commands to generate.