projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6
[deliverable/linux.git] / drivers / net / 8139too.c
1 /*
2
3 8139too.c: A RealTek RTL-8139 Fast Ethernet driver for Linux.
4
5 Maintained by Jeff Garzik <jgarzik@pobox.com>
6 Copyright 2000-2002 Jeff Garzik
7
8 Much code comes from Donald Becker's rtl8139.c driver,
9 versions 1.13 and older. This driver was originally based
10 on rtl8139.c version 1.07. Header of rtl8139.c version 1.13:
11
12 -----<snip>-----
13
14 Written 1997-2001 by Donald Becker.
15 This software may be used and distributed according to the
16 terms of the GNU General Public License (GPL), incorporated
17 herein by reference. Drivers based on or derived from this
18 code fall under the GPL and must retain the authorship,
19 copyright and license notice. This file is not a complete
20 program and may only be used when the entire operating
21 system is licensed under the GPL.
22
23 This driver is for boards based on the RTL8129 and RTL8139
24 PCI ethernet chips.
25
26 The author may be reached as becker@scyld.com, or C/O Scyld
27 Computing Corporation 410 Severn Ave., Suite 210 Annapolis
28 MD 21403
29
30 Support and updates available at
31 http://www.scyld.com/network/rtl8139.html
32
33 Twister-tuning table provided by Kinston
34 <shangh@realtek.com.tw>.
35
36 -----<snip>-----
37
38 This software may be used and distributed according to the terms
39 of the GNU General Public License, incorporated herein by reference.
40
41 Contributors:
42
43 Donald Becker - he wrote the original driver, kudos to him!
44 (but please don't e-mail him for support, this isn't his driver)
45
46 Tigran Aivazian - bug fixes, skbuff free cleanup
47
48 Martin Mares - suggestions for PCI cleanup
49
50 David S. Miller - PCI DMA and softnet updates
51
52 Ernst Gill - fixes ported from BSD driver
53
54 Daniel Kobras - identified specific locations of
55 posted MMIO write bugginess
56
57 Gerard Sharp - bug fix, testing and feedback
58
59 David Ford - Rx ring wrap fix
60
61 Dan DeMaggio - swapped RTL8139 cards with me, and allowed me
62 to find and fix a crucial bug on older chipsets.
63
64 Donald Becker/Chris Butterworth/Marcus Westergren -
65 Noticed various Rx packet size-related buglets.
66
67 Santiago Garcia Mantinan - testing and feedback
68
69 Jens David - 2.2.x kernel backports
70
71 Martin Dennett - incredibly helpful insight on undocumented
72 features of the 8139 chips
73
74 Jean-Jacques Michel - bug fix
75
76 Tobias Ringström - Rx interrupt status checking suggestion
77
78 Andrew Morton - Clear blocked signals, avoid
79 buffer overrun setting current->comm.
80
81 Kalle Olavi Niemitalo - Wake-on-LAN ioctls
82
83 Robert Kuebel - Save kernel thread from dying on any signal.
84
85 Submitting bug reports:
86
87 "rtl8139-diag -mmmaaavvveefN" output
88 enable RTL8139_DEBUG below, and look at 'dmesg' or kernel log
89
90 */
91
92 #define DRV_NAME "8139too"
93 #define DRV_VERSION "0.9.28"
94
95
96 #include <linux/module.h>
97 #include <linux/kernel.h>
98 #include <linux/compiler.h>
99 #include <linux/pci.h>
100 #include <linux/init.h>
101 #include <linux/netdevice.h>
102 #include <linux/etherdevice.h>
103 #include <linux/rtnetlink.h>
104 #include <linux/delay.h>
105 #include <linux/ethtool.h>
106 #include <linux/mii.h>
107 #include <linux/completion.h>
108 #include <linux/crc32.h>
109 #include <linux/io.h>
110 #include <linux/uaccess.h>
111 #include <asm/irq.h>
112
113 #define RTL8139_DRIVER_NAME DRV_NAME " Fast Ethernet driver " DRV_VERSION
114 #define PFX DRV_NAME ": "
115
116 /* Default Message level */
117 #define RTL8139_DEF_MSG_ENABLE (NETIF_MSG_DRV | \
118 NETIF_MSG_PROBE | \
119 NETIF_MSG_LINK)
120
121
122 /* define to 1, 2 or 3 to enable copious debugging info */
123 #define RTL8139_DEBUG 0
124
125 /* define to 1 to disable lightweight runtime debugging checks */
126 #undef RTL8139_NDEBUG
127
128
129 #if RTL8139_DEBUG
130 /* note: prints function name for you */
131 # define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
132 #else
133 # define DPRINTK(fmt, args...)
134 #endif
135
136 #ifdef RTL8139_NDEBUG
137 # define assert(expr) do {} while (0)
138 #else
139 # define assert(expr) \
140 if(unlikely(!(expr))) { \
141 printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \
142 #expr, __FILE__, __func__, __LINE__); \
143 }
144 #endif
145
146
147 /* A few user-configurable values. */
148 /* media options */
149 #define MAX_UNITS 8
150 static int media[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
151 static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};
152
153 /* Whether to use MMIO or PIO. Default to MMIO. */
154 #ifdef CONFIG_8139TOO_PIO
155 static int use_io = 1;
156 #else
157 static int use_io = 0;
158 #endif
159
160 /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
161 The RTL chips use a 64 element hash table based on the Ethernet CRC. */
162 static int multicast_filter_limit = 32;
163
164 /* bitmapped message enable number */
165 static int debug = -1;
166
167 /*
168 * Receive ring size
169 * Warning: 64K ring has hardware issues and may lock up.
170 */
171 #if defined(CONFIG_SH_DREAMCAST)
172 #define RX_BUF_IDX 0 /* 8K ring */
173 #else
174 #define RX_BUF_IDX 2 /* 32K ring */
175 #endif
176 #define RX_BUF_LEN (8192 << RX_BUF_IDX)
177 #define RX_BUF_PAD 16
178 #define RX_BUF_WRAP_PAD 2048 /* spare padding to handle lack of packet wrap */
179
180 #if RX_BUF_LEN == 65536
181 #define RX_BUF_TOT_LEN RX_BUF_LEN
182 #else
183 #define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD + RX_BUF_WRAP_PAD)
184 #endif
185
186 /* Number of Tx descriptor registers. */
187 #define NUM_TX_DESC 4
188
189 /* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
190 #define MAX_ETH_FRAME_SIZE 1536
191
192 /* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
193 #define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
194 #define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
195
196 /* PCI Tuning Parameters
197 Threshold is bytes transferred to chip before transmission starts. */
198 #define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */
199
200 /* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
201 #define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */
202 #define RX_DMA_BURST 7 /* Maximum PCI burst, '6' is 1024 */
203 #define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
204 #define TX_RETRY 8 /* 0-15. retries = 16 + (TX_RETRY * 16) */
205
206 /* Operational parameters that usually are not changed. */
207 /* Time in jiffies before concluding the transmitter is hung. */
208 #define TX_TIMEOUT (6*HZ)
209
210
211 enum {
212 HAS_MII_XCVR = 0x010000,
213 HAS_CHIP_XCVR = 0x020000,
214 HAS_LNK_CHNG = 0x040000,
215 };
216
217 #define RTL_NUM_STATS 4 /* number of ETHTOOL_GSTATS u64's */
218 #define RTL_REGS_VER 1 /* version of reg. data in ETHTOOL_GREGS */
219 #define RTL_MIN_IO_SIZE 0x80
220 #define RTL8139B_IO_SIZE 256
221
222 #define RTL8129_CAPS HAS_MII_XCVR
223 #define RTL8139_CAPS (HAS_CHIP_XCVR|HAS_LNK_CHNG)
224
225 typedef enum {
226 RTL8139 = 0,
227 RTL8129,
228 } board_t;
229
230
231 /* indexed by board_t, above */
232 static const struct {
233 const char *name;
234 u32 hw_flags;
235 } board_info[] __devinitdata = {
236 { "RealTek RTL8139", RTL8139_CAPS },
237 { "RealTek RTL8129", RTL8129_CAPS },
238 };
239
240
241 static struct pci_device_id rtl8139_pci_tbl[] = {
242 {0x10ec, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
243 {0x10ec, 0x8138, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
244 {0x1113, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
245 {0x1500, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
246 {0x4033, 0x1360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
247 {0x1186, 0x1300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
248 {0x1186, 0x1340, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
249 {0x13d1, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
250 {0x1259, 0xa117, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
251 {0x1259, 0xa11e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
252 {0x14ea, 0xab06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
253 {0x14ea, 0xab07, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
254 {0x11db, 0x1234, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
255 {0x1432, 0x9130, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
256 {0x02ac, 0x1012, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
257 {0x018a, 0x0106, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
258 {0x126c, 0x1211, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
259 {0x1743, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
260 {0x021b, 0x8139, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
261
262 #ifdef CONFIG_SH_SECUREEDGE5410
263 /* Bogus 8139 silicon reports 8129 without external PROM :-( */
264 {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8139 },
265 #endif
266 #ifdef CONFIG_8139TOO_8129
267 {0x10ec, 0x8129, PCI_ANY_ID, PCI_ANY_ID, 0, 0, RTL8129 },
268 #endif
269
270 /* some crazy cards report invalid vendor ids like
271 * 0x0001 here. The other ids are valid and constant,
272 * so we simply don't match on the main vendor id.
273 */
274 {PCI_ANY_ID, 0x8139, 0x10ec, 0x8139, 0, 0, RTL8139 },
275 {PCI_ANY_ID, 0x8139, 0x1186, 0x1300, 0, 0, RTL8139 },
276 {PCI_ANY_ID, 0x8139, 0x13d1, 0xab06, 0, 0, RTL8139 },
277
278 {0,}
279 };
280 MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl);
281
282 static struct {
283 const char str[ETH_GSTRING_LEN];
284 } ethtool_stats_keys[] = {
285 { "early_rx" },
286 { "tx_buf_mapped" },
287 { "tx_timeouts" },
288 { "rx_lost_in_ring" },
289 };
290
291 /* The rest of these values should never change. */
292
293 /* Symbolic offsets to registers. */
294 enum RTL8139_registers {
295 MAC0 = 0, /* Ethernet hardware address. */
296 MAR0 = 8, /* Multicast filter. */
297 TxStatus0 = 0x10, /* Transmit status (Four 32bit registers). */
298 TxAddr0 = 0x20, /* Tx descriptors (also four 32bit). */
299 RxBuf = 0x30,
300 ChipCmd = 0x37,
301 RxBufPtr = 0x38,
302 RxBufAddr = 0x3A,
303 IntrMask = 0x3C,
304 IntrStatus = 0x3E,
305 TxConfig = 0x40,
306 RxConfig = 0x44,
307 Timer = 0x48, /* A general-purpose counter. */
308 RxMissed = 0x4C, /* 24 bits valid, write clears. */
309 Cfg9346 = 0x50,
310 Config0 = 0x51,
311 Config1 = 0x52,
312 FlashReg = 0x54,
313 MediaStatus = 0x58,
314 Config3 = 0x59,
315 Config4 = 0x5A, /* absent on RTL-8139A */
316 HltClk = 0x5B,
317 MultiIntr = 0x5C,
318 TxSummary = 0x60,
319 BasicModeCtrl = 0x62,
320 BasicModeStatus = 0x64,
321 NWayAdvert = 0x66,
322 NWayLPAR = 0x68,
323 NWayExpansion = 0x6A,
324 /* Undocumented registers, but required for proper operation. */
325 FIFOTMS = 0x70, /* FIFO Control and test. */
326 CSCR = 0x74, /* Chip Status and Configuration Register. */
327 PARA78 = 0x78,
328 PARA7c = 0x7c, /* Magic transceiver parameter register. */
329 Config5 = 0xD8, /* absent on RTL-8139A */
330 };
331
332 enum ClearBitMasks {
333 MultiIntrClear = 0xF000,
334 ChipCmdClear = 0xE2,
335 Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1),
336 };
337
338 enum ChipCmdBits {
339 CmdReset = 0x10,
340 CmdRxEnb = 0x08,
341 CmdTxEnb = 0x04,
342 RxBufEmpty = 0x01,
343 };
344
345 /* Interrupt register bits, using my own meaningful names. */
346 enum IntrStatusBits {
347 PCIErr = 0x8000,
348 PCSTimeout = 0x4000,
349 RxFIFOOver = 0x40,
350 RxUnderrun = 0x20,
351 RxOverflow = 0x10,
352 TxErr = 0x08,
353 TxOK = 0x04,
354 RxErr = 0x02,
355 RxOK = 0x01,
356
357 RxAckBits = RxFIFOOver | RxOverflow | RxOK,
358 };
359
360 enum TxStatusBits {
361 TxHostOwns = 0x2000,
362 TxUnderrun = 0x4000,
363 TxStatOK = 0x8000,
364 TxOutOfWindow = 0x20000000,
365 TxAborted = 0x40000000,
366 TxCarrierLost = 0x80000000,
367 };
368 enum RxStatusBits {
369 RxMulticast = 0x8000,
370 RxPhysical = 0x4000,
371 RxBroadcast = 0x2000,
372 RxBadSymbol = 0x0020,
373 RxRunt = 0x0010,
374 RxTooLong = 0x0008,
375 RxCRCErr = 0x0004,
376 RxBadAlign = 0x0002,
377 RxStatusOK = 0x0001,
378 };
379
380 /* Bits in RxConfig. */
381 enum rx_mode_bits {
382 AcceptErr = 0x20,
383 AcceptRunt = 0x10,
384 AcceptBroadcast = 0x08,
385 AcceptMulticast = 0x04,
386 AcceptMyPhys = 0x02,
387 AcceptAllPhys = 0x01,
388 };
389
390 /* Bits in TxConfig. */
391 enum tx_config_bits {
392 /* Interframe Gap Time. Only TxIFG96 doesn't violate IEEE 802.3 */
393 TxIFGShift = 24,
394 TxIFG84 = (0 << TxIFGShift), /* 8.4us / 840ns (10 / 100Mbps) */
395 TxIFG88 = (1 << TxIFGShift), /* 8.8us / 880ns (10 / 100Mbps) */
396 TxIFG92 = (2 << TxIFGShift), /* 9.2us / 920ns (10 / 100Mbps) */
397 TxIFG96 = (3 << TxIFGShift), /* 9.6us / 960ns (10 / 100Mbps) */
398
399 TxLoopBack = (1 << 18) | (1 << 17), /* enable loopback test mode */
400 TxCRC = (1 << 16), /* DISABLE Tx pkt CRC append */
401 TxClearAbt = (1 << 0), /* Clear abort (WO) */
402 TxDMAShift = 8, /* DMA burst value (0-7) is shifted X many bits */
403 TxRetryShift = 4, /* TXRR value (0-15) is shifted X many bits */
404
405 TxVersionMask = 0x7C800000, /* mask out version bits 30-26, 23 */
406 };
407
408 /* Bits in Config1 */
409 enum Config1Bits {
410 Cfg1_PM_Enable = 0x01,
411 Cfg1_VPD_Enable = 0x02,
412 Cfg1_PIO = 0x04,
413 Cfg1_MMIO = 0x08,
414 LWAKE = 0x10, /* not on 8139, 8139A */
415 Cfg1_Driver_Load = 0x20,
416 Cfg1_LED0 = 0x40,
417 Cfg1_LED1 = 0x80,
418 SLEEP = (1 << 1), /* only on 8139, 8139A */
419 PWRDN = (1 << 0), /* only on 8139, 8139A */
420 };
421
422 /* Bits in Config3 */
423 enum Config3Bits {
424 Cfg3_FBtBEn = (1 << 0), /* 1 = Fast Back to Back */
425 Cfg3_FuncRegEn = (1 << 1), /* 1 = enable CardBus Function registers */
426 Cfg3_CLKRUN_En = (1 << 2), /* 1 = enable CLKRUN */
427 Cfg3_CardB_En = (1 << 3), /* 1 = enable CardBus registers */
428 Cfg3_LinkUp = (1 << 4), /* 1 = wake up on link up */
429 Cfg3_Magic = (1 << 5), /* 1 = wake up on Magic Packet (tm) */
430 Cfg3_PARM_En = (1 << 6), /* 0 = software can set twister parameters */
431 Cfg3_GNTSel = (1 << 7), /* 1 = delay 1 clock from PCI GNT signal */
432 };
433
434 /* Bits in Config4 */
435 enum Config4Bits {
436 LWPTN = (1 << 2), /* not on 8139, 8139A */
437 };
438
439 /* Bits in Config5 */
440 enum Config5Bits {
441 Cfg5_PME_STS = (1 << 0), /* 1 = PCI reset resets PME_Status */
442 Cfg5_LANWake = (1 << 1), /* 1 = enable LANWake signal */
443 Cfg5_LDPS = (1 << 2), /* 0 = save power when link is down */
444 Cfg5_FIFOAddrPtr= (1 << 3), /* Realtek internal SRAM testing */
445 Cfg5_UWF = (1 << 4), /* 1 = accept unicast wakeup frame */
446 Cfg5_MWF = (1 << 5), /* 1 = accept multicast wakeup frame */
447 Cfg5_BWF = (1 << 6), /* 1 = accept broadcast wakeup frame */
448 };
449
450 enum RxConfigBits {
451 /* rx fifo threshold */
452 RxCfgFIFOShift = 13,
453 RxCfgFIFONone = (7 << RxCfgFIFOShift),
454
455 /* Max DMA burst */
456 RxCfgDMAShift = 8,
457 RxCfgDMAUnlimited = (7 << RxCfgDMAShift),
458
459 /* rx ring buffer length */
460 RxCfgRcv8K = 0,
461 RxCfgRcv16K = (1 << 11),
462 RxCfgRcv32K = (1 << 12),
463 RxCfgRcv64K = (1 << 11) | (1 << 12),
464
465 /* Disable packet wrap at end of Rx buffer. (not possible with 64k) */
466 RxNoWrap = (1 << 7),
467 };
468
469 /* Twister tuning parameters from RealTek.
470 Completely undocumented, but required to tune bad links on some boards. */
471 enum CSCRBits {
472 CSCR_LinkOKBit = 0x0400,
473 CSCR_LinkChangeBit = 0x0800,
474 CSCR_LinkStatusBits = 0x0f000,
475 CSCR_LinkDownOffCmd = 0x003c0,
476 CSCR_LinkDownCmd = 0x0f3c0,
477 };
478
479 enum Cfg9346Bits {
480 Cfg9346_Lock = 0x00,
481 Cfg9346_Unlock = 0xC0,
482 };
483
484 typedef enum {
485 CH_8139 = 0,
486 CH_8139_K,
487 CH_8139A,
488 CH_8139A_G,
489 CH_8139B,
490 CH_8130,
491 CH_8139C,
492 CH_8100,
493 CH_8100B_8139D,
494 CH_8101,
495 } chip_t;
496
497 enum chip_flags {
498 HasHltClk = (1 << 0),
499 HasLWake = (1 << 1),
500 };
501
502 #define HW_REVID(b30, b29, b28, b27, b26, b23, b22) \
503 (b30<<30 | b29<<29 | b28<<28 | b27<<27 | b26<<26 | b23<<23 | b22<<22)
504 #define HW_REVID_MASK HW_REVID(1, 1, 1, 1, 1, 1, 1)
505
506 /* directly indexed by chip_t, above */
507 static const struct {
508 const char *name;
509 u32 version; /* from RTL8139C/RTL8139D docs */
510 u32 flags;
511 } rtl_chip_info[] = {
512 { "RTL-8139",
513 HW_REVID(1, 0, 0, 0, 0, 0, 0),
514 HasHltClk,
515 },
516
517 { "RTL-8139 rev K",
518 HW_REVID(1, 1, 0, 0, 0, 0, 0),
519 HasHltClk,
520 },
521
522 { "RTL-8139A",
523 HW_REVID(1, 1, 1, 0, 0, 0, 0),
524 HasHltClk, /* XXX undocumented? */
525 },
526
527 { "RTL-8139A rev G",
528 HW_REVID(1, 1, 1, 0, 0, 1, 0),
529 HasHltClk, /* XXX undocumented? */
530 },
531
532 { "RTL-8139B",
533 HW_REVID(1, 1, 1, 1, 0, 0, 0),
534 HasLWake,
535 },
536
537 { "RTL-8130",
538 HW_REVID(1, 1, 1, 1, 1, 0, 0),
539 HasLWake,
540 },
541
542 { "RTL-8139C",
543 HW_REVID(1, 1, 1, 0, 1, 0, 0),
544 HasLWake,
545 },
546
547 { "RTL-8100",
548 HW_REVID(1, 1, 1, 1, 0, 1, 0),
549 HasLWake,
550 },
551
552 { "RTL-8100B/8139D",
553 HW_REVID(1, 1, 1, 0, 1, 0, 1),
554 HasHltClk /* XXX undocumented? */
555 | HasLWake,
556 },
557
558 { "RTL-8101",
559 HW_REVID(1, 1, 1, 0, 1, 1, 1),
560 HasLWake,
561 },
562 };
563
564 struct rtl_extra_stats {
565 unsigned long early_rx;
566 unsigned long tx_buf_mapped;
567 unsigned long tx_timeouts;
568 unsigned long rx_lost_in_ring;
569 };
570
571 struct rtl8139_private {
572 void __iomem *mmio_addr;
573 int drv_flags;
574 struct pci_dev *pci_dev;
575 u32 msg_enable;
576 struct napi_struct napi;
577 struct net_device *dev;
578
579 unsigned char *rx_ring;
580 unsigned int cur_rx; /* RX buf index of next pkt */
581 dma_addr_t rx_ring_dma;
582
583 unsigned int tx_flag;
584 unsigned long cur_tx;
585 unsigned long dirty_tx;
586 unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */
587 unsigned char *tx_bufs; /* Tx bounce buffer region. */
588 dma_addr_t tx_bufs_dma;
589
590 signed char phys[4]; /* MII device addresses. */
591
592 /* Twister tune state. */
593 char twistie, twist_row, twist_col;
594
595 unsigned int watchdog_fired : 1;
596 unsigned int default_port : 4; /* Last dev->if_port value. */
597 unsigned int have_thread : 1;
598
599 spinlock_t lock;
600 spinlock_t rx_lock;
601
602 chip_t chipset;
603 u32 rx_config;
604 struct rtl_extra_stats xstats;
605
606 struct delayed_work thread;
607
608 struct mii_if_info mii;
609 unsigned int regs_len;
610 unsigned long fifo_copy_timeout;
611 };
612
613 MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
614 MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver");
615 MODULE_LICENSE("GPL");
616 MODULE_VERSION(DRV_VERSION);
617
618 module_param(use_io, int, 0);
619 MODULE_PARM_DESC(use_io, "Force use of I/O access mode. 0=MMIO 1=PIO");
620 module_param(multicast_filter_limit, int, 0);
621 module_param_array(media, int, NULL, 0);
622 module_param_array(full_duplex, int, NULL, 0);
623 module_param(debug, int, 0);
624 MODULE_PARM_DESC (debug, "8139too bitmapped message enable number");
625 MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered multicast addresses");
626 MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps");
627 MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)");
628
629 static int read_eeprom (void __iomem *ioaddr, int location, int addr_len);
630 static int rtl8139_open (struct net_device *dev);
631 static int mdio_read (struct net_device *dev, int phy_id, int location);
632 static void mdio_write (struct net_device *dev, int phy_id, int location,
633 int val);
634 static void rtl8139_start_thread(struct rtl8139_private *tp);
635 static void rtl8139_tx_timeout (struct net_device *dev);
636 static void rtl8139_init_ring (struct net_device *dev);
637 static int rtl8139_start_xmit (struct sk_buff *skb,
638 struct net_device *dev);
639 #ifdef CONFIG_NET_POLL_CONTROLLER
640 static void rtl8139_poll_controller(struct net_device *dev);
641 #endif
642 static int rtl8139_poll(struct napi_struct *napi, int budget);
643 static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance);
644 static int rtl8139_close (struct net_device *dev);
645 static int netdev_ioctl (struct net_device *dev, struct ifreq *rq, int cmd);
646 static struct net_device_stats *rtl8139_get_stats (struct net_device *dev);
647 static void rtl8139_set_rx_mode (struct net_device *dev);
648 static void __set_rx_mode (struct net_device *dev);
649 static void rtl8139_hw_start (struct net_device *dev);
650 static void rtl8139_thread (struct work_struct *work);
651 static void rtl8139_tx_timeout_task(struct work_struct *work);
652 static const struct ethtool_ops rtl8139_ethtool_ops;
653
654 /* write MMIO register, with flush */
655 /* Flush avoids rtl8139 bug w/ posted MMIO writes */
656 #define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0)
657 #define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0)
658 #define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0)
659
660 /* write MMIO register */
661 #define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg))
662 #define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg))
663 #define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg))
664
665 /* read MMIO register */
666 #define RTL_R8(reg) ioread8 (ioaddr + (reg))
667 #define RTL_R16(reg) ioread16 (ioaddr + (reg))
668 #define RTL_R32(reg) ((unsigned long) ioread32 (ioaddr + (reg)))
669
670
671 static const u16 rtl8139_intr_mask =
672 PCIErr | PCSTimeout | RxUnderrun | RxOverflow | RxFIFOOver |
673 TxErr | TxOK | RxErr | RxOK;
674
675 static const u16 rtl8139_norx_intr_mask =
676 PCIErr | PCSTimeout | RxUnderrun |
677 TxErr | TxOK | RxErr ;
678
679 #if RX_BUF_IDX == 0
680 static const unsigned int rtl8139_rx_config =
681 RxCfgRcv8K | RxNoWrap |
682 (RX_FIFO_THRESH << RxCfgFIFOShift) |
683 (RX_DMA_BURST << RxCfgDMAShift);
684 #elif RX_BUF_IDX == 1
685 static const unsigned int rtl8139_rx_config =
686 RxCfgRcv16K | RxNoWrap |
687 (RX_FIFO_THRESH << RxCfgFIFOShift) |
688 (RX_DMA_BURST << RxCfgDMAShift);
689 #elif RX_BUF_IDX == 2
690 static const unsigned int rtl8139_rx_config =
691 RxCfgRcv32K | RxNoWrap |
692 (RX_FIFO_THRESH << RxCfgFIFOShift) |
693 (RX_DMA_BURST << RxCfgDMAShift);
694 #elif RX_BUF_IDX == 3
695 static const unsigned int rtl8139_rx_config =
696 RxCfgRcv64K |
697 (RX_FIFO_THRESH << RxCfgFIFOShift) |
698 (RX_DMA_BURST << RxCfgDMAShift);
699 #else
700 #error "Invalid configuration for 8139_RXBUF_IDX"
701 #endif
702
703 static const unsigned int rtl8139_tx_config =
704 TxIFG96 | (TX_DMA_BURST << TxDMAShift) | (TX_RETRY << TxRetryShift);
705
706 static void __rtl8139_cleanup_dev (struct net_device *dev)
707 {
708 struct rtl8139_private *tp = netdev_priv(dev);
709 struct pci_dev *pdev;
710
711 assert (dev != NULL);
712 assert (tp->pci_dev != NULL);
713 pdev = tp->pci_dev;
714
715 if (tp->mmio_addr)
716 pci_iounmap (pdev, tp->mmio_addr);
717
718 /* it's ok to call this even if we have no regions to free */
719 pci_release_regions (pdev);
720
721 free_netdev(dev);
722 pci_set_drvdata (pdev, NULL);
723 }
724
725
726 static void rtl8139_chip_reset (void __iomem *ioaddr)
727 {
728 int i;
729
730 /* Soft reset the chip. */
731 RTL_W8 (ChipCmd, CmdReset);
732
733 /* Check that the chip has finished the reset. */
734 for (i = 1000; i > 0; i--) {
735 barrier();
736 if ((RTL_R8 (ChipCmd) & CmdReset) == 0)
737 break;
738 udelay (10);
739 }
740 }
741
742
743 static int __devinit rtl8139_init_board (struct pci_dev *pdev,
744 struct net_device **dev_out)
745 {
746 void __iomem *ioaddr;
747 struct net_device *dev;
748 struct rtl8139_private *tp;
749 u8 tmp8;
750 int rc, disable_dev_on_err = 0;
751 unsigned int i;
752 unsigned long pio_start, pio_end, pio_flags, pio_len;
753 unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
754 u32 version;
755
756 assert (pdev != NULL);
757
758 *dev_out = NULL;
759
760 /* dev and priv zeroed in alloc_etherdev */
761 dev = alloc_etherdev (sizeof (*tp));
762 if (dev == NULL) {
763 dev_err(&pdev->dev, "Unable to alloc new net device\n");
764 return -ENOMEM;
765 }
766 SET_NETDEV_DEV(dev, &pdev->dev);
767
768 tp = netdev_priv(dev);
769 tp->pci_dev = pdev;
770
771 /* enable device (incl. PCI PM wakeup and hotplug setup) */
772 rc = pci_enable_device (pdev);
773 if (rc)
774 goto err_out;
775
776 pio_start = pci_resource_start (pdev, 0);
777 pio_end = pci_resource_end (pdev, 0);
778 pio_flags = pci_resource_flags (pdev, 0);
779 pio_len = pci_resource_len (pdev, 0);
780
781 mmio_start = pci_resource_start (pdev, 1);
782 mmio_end = pci_resource_end (pdev, 1);
783 mmio_flags = pci_resource_flags (pdev, 1);
784 mmio_len = pci_resource_len (pdev, 1);
785
786 /* set this immediately, we need to know before
787 * we talk to the chip directly */
788 DPRINTK("PIO region size == 0x%02X\n", pio_len);
789 DPRINTK("MMIO region size == 0x%02lX\n", mmio_len);
790
791 retry:
792 if (use_io) {
793 /* make sure PCI base addr 0 is PIO */
794 if (!(pio_flags & IORESOURCE_IO)) {
795 dev_err(&pdev->dev, "region #0 not a PIO resource, aborting\n");
796 rc = -ENODEV;
797 goto err_out;
798 }
799 /* check for weird/broken PCI region reporting */
800 if (pio_len < RTL_MIN_IO_SIZE) {
801 dev_err(&pdev->dev, "Invalid PCI I/O region size(s), aborting\n");
802 rc = -ENODEV;
803 goto err_out;
804 }
805 } else {
806 /* make sure PCI base addr 1 is MMIO */
807 if (!(mmio_flags & IORESOURCE_MEM)) {
808 dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
809 rc = -ENODEV;
810 goto err_out;
811 }
812 if (mmio_len < RTL_MIN_IO_SIZE) {
813 dev_err(&pdev->dev, "Invalid PCI mem region size(s), aborting\n");
814 rc = -ENODEV;
815 goto err_out;
816 }
817 }
818
819 rc = pci_request_regions (pdev, DRV_NAME);
820 if (rc)
821 goto err_out;
822 disable_dev_on_err = 1;
823
824 /* enable PCI bus-mastering */
825 pci_set_master (pdev);
826
827 if (use_io) {
828 ioaddr = pci_iomap(pdev, 0, 0);
829 if (!ioaddr) {
830 dev_err(&pdev->dev, "cannot map PIO, aborting\n");
831 rc = -EIO;
832 goto err_out;
833 }
834 dev->base_addr = pio_start;
835 tp->regs_len = pio_len;
836 } else {
837 /* ioremap MMIO region */
838 ioaddr = pci_iomap(pdev, 1, 0);
839 if (ioaddr == NULL) {
840 dev_err(&pdev->dev, "cannot remap MMIO, trying PIO\n");
841 pci_release_regions(pdev);
842 use_io = 1;
843 goto retry;
844 }
845 dev->base_addr = (long) ioaddr;
846 tp->regs_len = mmio_len;
847 }
848 tp->mmio_addr = ioaddr;
849
850 /* Bring old chips out of low-power mode. */
851 RTL_W8 (HltClk, 'R');
852
853 /* check for missing/broken hardware */
854 if (RTL_R32 (TxConfig) == 0xFFFFFFFF) {
855 dev_err(&pdev->dev, "Chip not responding, ignoring board\n");
856 rc = -EIO;
857 goto err_out;
858 }
859
860 /* identify chip attached to board */
861 version = RTL_R32 (TxConfig) & HW_REVID_MASK;
862 for (i = 0; i < ARRAY_SIZE (rtl_chip_info); i++)
863 if (version == rtl_chip_info[i].version) {
864 tp->chipset = i;
865 goto match;
866 }
867
868 /* if unknown chip, assume array element #0, original RTL-8139 in this case */
869 dev_printk (KERN_DEBUG, &pdev->dev,
870 "unknown chip version, assuming RTL-8139\n");
871 dev_printk (KERN_DEBUG, &pdev->dev,
872 "TxConfig = 0x%lx\n", RTL_R32 (TxConfig));
873 tp->chipset = 0;
874
875 match:
876 DPRINTK ("chipset id (%d) == index %d, '%s'\n",
877 version, i, rtl_chip_info[i].name);
878
879 if (tp->chipset >= CH_8139B) {
880 u8 new_tmp8 = tmp8 = RTL_R8 (Config1);
881 DPRINTK("PCI PM wakeup\n");
882 if ((rtl_chip_info[tp->chipset].flags & HasLWake) &&
883 (tmp8 & LWAKE))
884 new_tmp8 &= ~LWAKE;
885 new_tmp8 |= Cfg1_PM_Enable;
886 if (new_tmp8 != tmp8) {
887 RTL_W8 (Cfg9346, Cfg9346_Unlock);
888 RTL_W8 (Config1, tmp8);
889 RTL_W8 (Cfg9346, Cfg9346_Lock);
890 }
891 if (rtl_chip_info[tp->chipset].flags & HasLWake) {
892 tmp8 = RTL_R8 (Config4);
893 if (tmp8 & LWPTN) {
894 RTL_W8 (Cfg9346, Cfg9346_Unlock);
895 RTL_W8 (Config4, tmp8 & ~LWPTN);
896 RTL_W8 (Cfg9346, Cfg9346_Lock);
897 }
898 }
899 } else {
900 DPRINTK("Old chip wakeup\n");
901 tmp8 = RTL_R8 (Config1);
902 tmp8 &= ~(SLEEP | PWRDN);
903 RTL_W8 (Config1, tmp8);
904 }
905
906 rtl8139_chip_reset (ioaddr);
907
908 *dev_out = dev;
909 return 0;
910
911 err_out:
912 __rtl8139_cleanup_dev (dev);
913 if (disable_dev_on_err)
914 pci_disable_device (pdev);
915 return rc;
916 }
917
918
919 static int __devinit rtl8139_init_one (struct pci_dev *pdev,
920 const struct pci_device_id *ent)
921 {
922 struct net_device *dev = NULL;
923 struct rtl8139_private *tp;
924 int i, addr_len, option;
925 void __iomem *ioaddr;
926 static int board_idx = -1;
927 DECLARE_MAC_BUF(mac);
928
929 assert (pdev != NULL);
930 assert (ent != NULL);
931
932 board_idx++;
933
934 /* when we're built into the kernel, the driver version message
935 * is only printed if at least one 8139 board has been found
936 */
937 #ifndef MODULE
938 {
939 static int printed_version;
940 if (!printed_version++)
941 printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
942 }
943 #endif
944
945 if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
946 pdev->device == PCI_DEVICE_ID_REALTEK_8139 && pdev->revision >= 0x20) {
947 dev_info(&pdev->dev,
948 "This (id %04x:%04x rev %02x) is an enhanced 8139C+ chip\n",
949 pdev->vendor, pdev->device, pdev->revision);
950 dev_info(&pdev->dev,
951 "Use the \"8139cp\" driver for improved performance and stability.\n");
952 }
953
954 if (pdev->vendor == PCI_VENDOR_ID_REALTEK &&
955 pdev->device == PCI_DEVICE_ID_REALTEK_8139 &&
956 pdev->subsystem_vendor == PCI_VENDOR_ID_ATHEROS &&
957 pdev->subsystem_device == PCI_DEVICE_ID_REALTEK_8139) {
958 printk(KERN_INFO "8139too: OQO Model 2 detected. Forcing PIO\n");
959 use_io = 1;
960 }
961
962 i = rtl8139_init_board (pdev, &dev);
963 if (i < 0)
964 return i;
965
966 assert (dev != NULL);
967 tp = netdev_priv(dev);
968 tp->dev = dev;
969
970 ioaddr = tp->mmio_addr;
971 assert (ioaddr != NULL);
972
973 addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6;
974 for (i = 0; i < 3; i++)
975 ((__le16 *) (dev->dev_addr))[i] =
976 cpu_to_le16(read_eeprom (ioaddr, i + 7, addr_len));
977 memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
978
979 /* The Rtl8139-specific entries in the device structure. */
980 dev->open = rtl8139_open;
981 dev->hard_start_xmit = rtl8139_start_xmit;
982 netif_napi_add(dev, &tp->napi, rtl8139_poll, 64);
983 dev->stop = rtl8139_close;
984 dev->get_stats = rtl8139_get_stats;
985 dev->set_multicast_list = rtl8139_set_rx_mode;
986 dev->do_ioctl = netdev_ioctl;
987 dev->ethtool_ops = &rtl8139_ethtool_ops;
988 dev->tx_timeout = rtl8139_tx_timeout;
989 dev->watchdog_timeo = TX_TIMEOUT;
990 #ifdef CONFIG_NET_POLL_CONTROLLER
991 dev->poll_controller = rtl8139_poll_controller;
992 #endif
993
994 /* note: the hardware is not capable of sg/csum/highdma, however
995 * through the use of skb_copy_and_csum_dev we enable these
996 * features
997 */
998 dev->features |= NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
999
1000 dev->irq = pdev->irq;
1001
1002 /* tp zeroed and aligned in alloc_etherdev */
1003 tp = netdev_priv(dev);
1004
1005 /* note: tp->chipset set in rtl8139_init_board */
1006 tp->drv_flags = board_info[ent->driver_data].hw_flags;
1007 tp->mmio_addr = ioaddr;
1008 tp->msg_enable =
1009 (debug < 0 ? RTL8139_DEF_MSG_ENABLE : ((1 << debug) - 1));
1010 spin_lock_init (&tp->lock);
1011 spin_lock_init (&tp->rx_lock);
1012 INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
1013 tp->mii.dev = dev;
1014 tp->mii.mdio_read = mdio_read;
1015 tp->mii.mdio_write = mdio_write;
1016 tp->mii.phy_id_mask = 0x3f;
1017 tp->mii.reg_num_mask = 0x1f;
1018
1019 /* dev is fully set up and ready to use now */
1020 DPRINTK("about to register device named %s (%p)...\n", dev->name, dev);
1021 i = register_netdev (dev);
1022 if (i) goto err_out;
1023
1024 pci_set_drvdata (pdev, dev);
1025
1026 printk (KERN_INFO "%s: %s at 0x%lx, "
1027 "%s, IRQ %d\n",
1028 dev->name,
1029 board_info[ent->driver_data].name,
1030 dev->base_addr,
1031 print_mac(mac, dev->dev_addr),
1032 dev->irq);
1033
1034 printk (KERN_DEBUG "%s: Identified 8139 chip type '%s'\n",
1035 dev->name, rtl_chip_info[tp->chipset].name);
1036
1037 /* Find the connected MII xcvrs.
1038 Doing this in open() would allow detecting external xcvrs later, but
1039 takes too much time. */
1040 #ifdef CONFIG_8139TOO_8129
1041 if (tp->drv_flags & HAS_MII_XCVR) {
1042 int phy, phy_idx = 0;
1043 for (phy = 0; phy < 32 && phy_idx < sizeof(tp->phys); phy++) {
1044 int mii_status = mdio_read(dev, phy, 1);
1045 if (mii_status != 0xffff && mii_status != 0x0000) {
1046 u16 advertising = mdio_read(dev, phy, 4);
1047 tp->phys[phy_idx++] = phy;
1048 printk(KERN_INFO "%s: MII transceiver %d status 0x%4.4x "
1049 "advertising %4.4x.\n",
1050 dev->name, phy, mii_status, advertising);
1051 }
1052 }
1053 if (phy_idx == 0) {
1054 printk(KERN_INFO "%s: No MII transceivers found! Assuming SYM "
1055 "transceiver.\n",
1056 dev->name);
1057 tp->phys[0] = 32;
1058 }
1059 } else
1060 #endif
1061 tp->phys[0] = 32;
1062 tp->mii.phy_id = tp->phys[0];
1063
1064 /* The lower four bits are the media type. */
1065 option = (board_idx >= MAX_UNITS) ? 0 : media[board_idx];
1066 if (option > 0) {
1067 tp->mii.full_duplex = (option & 0x210) ? 1 : 0;
1068 tp->default_port = option & 0xFF;
1069 if (tp->default_port)
1070 tp->mii.force_media = 1;
1071 }
1072 if (board_idx < MAX_UNITS && full_duplex[board_idx] > 0)
1073 tp->mii.full_duplex = full_duplex[board_idx];
1074 if (tp->mii.full_duplex) {
1075 printk(KERN_INFO "%s: Media type forced to Full Duplex.\n", dev->name);
1076 /* Changing the MII-advertised media because might prevent
1077 re-connection. */
1078 tp->mii.force_media = 1;
1079 }
1080 if (tp->default_port) {
1081 printk(KERN_INFO " Forcing %dMbps %s-duplex operation.\n",
1082 (option & 0x20 ? 100 : 10),
1083 (option & 0x10 ? "full" : "half"));
1084 mdio_write(dev, tp->phys[0], 0,
1085 ((option & 0x20) ? 0x2000 : 0) | /* 100Mbps? */
1086 ((option & 0x10) ? 0x0100 : 0)); /* Full duplex? */
1087 }
1088
1089 /* Put the chip into low-power mode. */
1090 if (rtl_chip_info[tp->chipset].flags & HasHltClk)
1091 RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
1092
1093 return 0;
1094
1095 err_out:
1096 __rtl8139_cleanup_dev (dev);
1097 pci_disable_device (pdev);
1098 return i;
1099 }
1100
1101
1102 static void __devexit rtl8139_remove_one (struct pci_dev *pdev)
1103 {
1104 struct net_device *dev = pci_get_drvdata (pdev);
1105
1106 assert (dev != NULL);
1107
1108 flush_scheduled_work();
1109
1110 unregister_netdev (dev);
1111
1112 __rtl8139_cleanup_dev (dev);
1113 pci_disable_device (pdev);
1114 }
1115
1116
1117 /* Serial EEPROM section. */
1118
1119 /* EEPROM_Ctrl bits. */
1120 #define EE_SHIFT_CLK 0x04 /* EEPROM shift clock. */
1121 #define EE_CS 0x08 /* EEPROM chip select. */
1122 #define EE_DATA_WRITE 0x02 /* EEPROM chip data in. */
1123 #define EE_WRITE_0 0x00
1124 #define EE_WRITE_1 0x02
1125 #define EE_DATA_READ 0x01 /* EEPROM chip data out. */
1126 #define EE_ENB (0x80 | EE_CS)
1127
1128 /* Delay between EEPROM clock transitions.
1129 No extra delay is needed with 33Mhz PCI, but 66Mhz may change this.
1130 */
1131
1132 #define eeprom_delay() (void)RTL_R32(Cfg9346)
1133
1134 /* The EEPROM commands include the alway-set leading bit. */
1135 #define EE_WRITE_CMD (5)
1136 #define EE_READ_CMD (6)
1137 #define EE_ERASE_CMD (7)
1138
1139 static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len)
1140 {
1141 int i;
1142 unsigned retval = 0;
1143 int read_cmd = location | (EE_READ_CMD << addr_len);
1144
1145 RTL_W8 (Cfg9346, EE_ENB & ~EE_CS);
1146 RTL_W8 (Cfg9346, EE_ENB);
1147 eeprom_delay ();
1148
1149 /* Shift the read command bits out. */
1150 for (i = 4 + addr_len; i >= 0; i--) {
1151 int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0;
1152 RTL_W8 (Cfg9346, EE_ENB | dataval);
1153 eeprom_delay ();
1154 RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK);
1155 eeprom_delay ();
1156 }
1157 RTL_W8 (Cfg9346, EE_ENB);
1158 eeprom_delay ();
1159
1160 for (i = 16; i > 0; i--) {
1161 RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK);
1162 eeprom_delay ();
1163 retval =
1164 (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 :
1165 0);
1166 RTL_W8 (Cfg9346, EE_ENB);
1167 eeprom_delay ();
1168 }
1169
1170 /* Terminate the EEPROM access. */
1171 RTL_W8 (Cfg9346, ~EE_CS);
1172 eeprom_delay ();
1173
1174 return retval;
1175 }
1176
1177 /* MII serial management: mostly bogus for now. */
1178 /* Read and write the MII management registers using software-generated
1179 serial MDIO protocol.
1180 The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
1181 met by back-to-back PCI I/O cycles, but we insert a delay to avoid
1182 "overclocking" issues. */
1183 #define MDIO_DIR 0x80
1184 #define MDIO_DATA_OUT 0x04
1185 #define MDIO_DATA_IN 0x02
1186 #define MDIO_CLK 0x01
1187 #define MDIO_WRITE0 (MDIO_DIR)
1188 #define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT)
1189
1190 #define mdio_delay() RTL_R8(Config4)
1191
1192
1193 static const char mii_2_8139_map[8] = {
1194 BasicModeCtrl,
1195 BasicModeStatus,
1196 0,
1197 0,
1198 NWayAdvert,
1199 NWayLPAR,
1200 NWayExpansion,
1201 0
1202 };
1203
1204
1205 #ifdef CONFIG_8139TOO_8129
1206 /* Syncronize the MII management interface by shifting 32 one bits out. */
1207 static void mdio_sync (void __iomem *ioaddr)
1208 {
1209 int i;
1210
1211 for (i = 32; i >= 0; i--) {
1212 RTL_W8 (Config4, MDIO_WRITE1);
1213 mdio_delay ();
1214 RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK);
1215 mdio_delay ();
1216 }
1217 }
1218 #endif
1219
1220 static int mdio_read (struct net_device *dev, int phy_id, int location)
1221 {
1222 struct rtl8139_private *tp = netdev_priv(dev);
1223 int retval = 0;
1224 #ifdef CONFIG_8139TOO_8129
1225 void __iomem *ioaddr = tp->mmio_addr;
1226 int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location;
1227 int i;
1228 #endif
1229
1230 if (phy_id > 31) { /* Really a 8139. Use internal registers. */
1231 void __iomem *ioaddr = tp->mmio_addr;
1232 return location < 8 && mii_2_8139_map[location] ?
1233 RTL_R16 (mii_2_8139_map[location]) : 0;
1234 }
1235
1236 #ifdef CONFIG_8139TOO_8129
1237 mdio_sync (ioaddr);
1238 /* Shift the read command bits out. */
1239 for (i = 15; i >= 0; i--) {
1240 int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0;
1241
1242 RTL_W8 (Config4, MDIO_DIR | dataval);
1243 mdio_delay ();
1244 RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK);
1245 mdio_delay ();
1246 }
1247
1248 /* Read the two transition, 16 data, and wire-idle bits. */
1249 for (i = 19; i > 0; i--) {
1250 RTL_W8 (Config4, 0);
1251 mdio_delay ();
1252 retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0);
1253 RTL_W8 (Config4, MDIO_CLK);
1254 mdio_delay ();
1255 }
1256 #endif
1257
1258 return (retval >> 1) & 0xffff;
1259 }
1260
1261
1262 static void mdio_write (struct net_device *dev, int phy_id, int location,
1263 int value)
1264 {
1265 struct rtl8139_private *tp = netdev_priv(dev);
1266 #ifdef CONFIG_8139TOO_8129
1267 void __iomem *ioaddr = tp->mmio_addr;
1268 int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value;
1269 int i;
1270 #endif
1271
1272 if (phy_id > 31) { /* Really a 8139. Use internal registers. */
1273 void __iomem *ioaddr = tp->mmio_addr;
1274 if (location == 0) {
1275 RTL_W8 (Cfg9346, Cfg9346_Unlock);
1276 RTL_W16 (BasicModeCtrl, value);
1277 RTL_W8 (Cfg9346, Cfg9346_Lock);
1278 } else if (location < 8 && mii_2_8139_map[location])
1279 RTL_W16 (mii_2_8139_map[location], value);
1280 return;
1281 }
1282
1283 #ifdef CONFIG_8139TOO_8129
1284 mdio_sync (ioaddr);
1285
1286 /* Shift the command bits out. */
1287 for (i = 31; i >= 0; i--) {
1288 int dataval =
1289 (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0;
1290 RTL_W8 (Config4, dataval);
1291 mdio_delay ();
1292 RTL_W8 (Config4, dataval | MDIO_CLK);
1293 mdio_delay ();
1294 }
1295 /* Clear out extra bits. */
1296 for (i = 2; i > 0; i--) {
1297 RTL_W8 (Config4, 0);
1298 mdio_delay ();
1299 RTL_W8 (Config4, MDIO_CLK);
1300 mdio_delay ();
1301 }
1302 #endif
1303 }
1304
1305
1306 static int rtl8139_open (struct net_device *dev)
1307 {
1308 struct rtl8139_private *tp = netdev_priv(dev);
1309 int retval;
1310 void __iomem *ioaddr = tp->mmio_addr;
1311
1312 retval = request_irq (dev->irq, rtl8139_interrupt, IRQF_SHARED, dev->name, dev);
1313 if (retval)
1314 return retval;
1315
1316 tp->tx_bufs = dma_alloc_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
1317 &tp->tx_bufs_dma, GFP_KERNEL);
1318 tp->rx_ring = dma_alloc_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
1319 &tp->rx_ring_dma, GFP_KERNEL);
1320 if (tp->tx_bufs == NULL || tp->rx_ring == NULL) {
1321 free_irq(dev->irq, dev);
1322
1323 if (tp->tx_bufs)
1324 dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
1325 tp->tx_bufs, tp->tx_bufs_dma);
1326 if (tp->rx_ring)
1327 dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
1328 tp->rx_ring, tp->rx_ring_dma);
1329
1330 return -ENOMEM;
1331
1332 }
1333
1334 napi_enable(&tp->napi);
1335
1336 tp->mii.full_duplex = tp->mii.force_media;
1337 tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000;
1338
1339 rtl8139_init_ring (dev);
1340 rtl8139_hw_start (dev);
1341 netif_start_queue (dev);
1342
1343 if (netif_msg_ifup(tp))
1344 printk(KERN_DEBUG "%s: rtl8139_open() ioaddr %#llx IRQ %d"
1345 " GP Pins %2.2x %s-duplex.\n", dev->name,
1346 (unsigned long long)pci_resource_start (tp->pci_dev, 1),
1347 dev->irq, RTL_R8 (MediaStatus),
1348 tp->mii.full_duplex ? "full" : "half");
1349
1350 rtl8139_start_thread(tp);
1351
1352 return 0;
1353 }
1354
1355
1356 static void rtl_check_media (struct net_device *dev, unsigned int init_media)
1357 {
1358 struct rtl8139_private *tp = netdev_priv(dev);
1359
1360 if (tp->phys[0] >= 0) {
1361 mii_check_media(&tp->mii, netif_msg_link(tp), init_media);
1362 }
1363 }
1364
1365 /* Start the hardware at open or resume. */
1366 static void rtl8139_hw_start (struct net_device *dev)
1367 {
1368 struct rtl8139_private *tp = netdev_priv(dev);
1369 void __iomem *ioaddr = tp->mmio_addr;
1370 u32 i;
1371 u8 tmp;
1372
1373 /* Bring old chips out of low-power mode. */
1374 if (rtl_chip_info[tp->chipset].flags & HasHltClk)
1375 RTL_W8 (HltClk, 'R');
1376
1377 rtl8139_chip_reset (ioaddr);
1378
1379 /* unlock Config[01234] and BMCR register writes */
1380 RTL_W8_F (Cfg9346, Cfg9346_Unlock);
1381 /* Restore our idea of the MAC address. */
1382 RTL_W32_F (MAC0 + 0, le32_to_cpu (*(__le32 *) (dev->dev_addr + 0)));
1383 RTL_W32_F (MAC0 + 4, le16_to_cpu (*(__le16 *) (dev->dev_addr + 4)));
1384
1385 /* Must enable Tx/Rx before setting transfer thresholds! */
1386 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1387
1388 tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
1389 RTL_W32 (RxConfig, tp->rx_config);
1390 RTL_W32 (TxConfig, rtl8139_tx_config);
1391
1392 tp->cur_rx = 0;
1393
1394 rtl_check_media (dev, 1);
1395
1396 if (tp->chipset >= CH_8139B) {
1397 /* Disable magic packet scanning, which is enabled
1398 * when PM is enabled in Config1. It can be reenabled
1399 * via ETHTOOL_SWOL if desired. */
1400 RTL_W8 (Config3, RTL_R8 (Config3) & ~Cfg3_Magic);
1401 }
1402
1403 DPRINTK("init buffer addresses\n");
1404
1405 /* Lock Config[01234] and BMCR register writes */
1406 RTL_W8 (Cfg9346, Cfg9346_Lock);
1407
1408 /* init Rx ring buffer DMA address */
1409 RTL_W32_F (RxBuf, tp->rx_ring_dma);
1410
1411 /* init Tx buffer DMA addresses */
1412 for (i = 0; i < NUM_TX_DESC; i++)
1413 RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs));
1414
1415 RTL_W32 (RxMissed, 0);
1416
1417 rtl8139_set_rx_mode (dev);
1418
1419 /* no early-rx interrupts */
1420 RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear);
1421
1422 /* make sure RxTx has started */
1423 tmp = RTL_R8 (ChipCmd);
1424 if ((!(tmp & CmdRxEnb)) || (!(tmp & CmdTxEnb)))
1425 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1426
1427 /* Enable all known interrupts by setting the interrupt mask. */
1428 RTL_W16 (IntrMask, rtl8139_intr_mask);
1429 }
1430
1431
1432 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
1433 static void rtl8139_init_ring (struct net_device *dev)
1434 {
1435 struct rtl8139_private *tp = netdev_priv(dev);
1436 int i;
1437
1438 tp->cur_rx = 0;
1439 tp->cur_tx = 0;
1440 tp->dirty_tx = 0;
1441
1442 for (i = 0; i < NUM_TX_DESC; i++)
1443 tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE];
1444 }
1445
1446
1447 /* This must be global for CONFIG_8139TOO_TUNE_TWISTER case */
1448 static int next_tick = 3 * HZ;
1449
1450 #ifndef CONFIG_8139TOO_TUNE_TWISTER
1451 static inline void rtl8139_tune_twister (struct net_device *dev,
1452 struct rtl8139_private *tp) {}
1453 #else
1454 enum TwisterParamVals {
1455 PARA78_default = 0x78fa8388,
1456 PARA7c_default = 0xcb38de43, /* param[0][3] */
1457 PARA7c_xxx = 0xcb38de43,
1458 };
1459
1460 static const unsigned long param[4][4] = {
1461 {0xcb39de43, 0xcb39ce43, 0xfb38de03, 0xcb38de43},
1462 {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
1463 {0xcb39de43, 0xcb39ce43, 0xcb39ce83, 0xcb39ce83},
1464 {0xbb39de43, 0xbb39ce43, 0xbb39ce83, 0xbb39ce83}
1465 };
1466
1467 static void rtl8139_tune_twister (struct net_device *dev,
1468 struct rtl8139_private *tp)
1469 {
1470 int linkcase;
1471 void __iomem *ioaddr = tp->mmio_addr;
1472
1473 /* This is a complicated state machine to configure the "twister" for
1474 impedance/echos based on the cable length.
1475 All of this is magic and undocumented.
1476 */
1477 switch (tp->twistie) {
1478 case 1:
1479 if (RTL_R16 (CSCR) & CSCR_LinkOKBit) {
1480 /* We have link beat, let us tune the twister. */
1481 RTL_W16 (CSCR, CSCR_LinkDownOffCmd);
1482 tp->twistie = 2; /* Change to state 2. */
1483 next_tick = HZ / 10;
1484 } else {
1485 /* Just put in some reasonable defaults for when beat returns. */
1486 RTL_W16 (CSCR, CSCR_LinkDownCmd);
1487 RTL_W32 (FIFOTMS, 0x20); /* Turn on cable test mode. */
1488 RTL_W32 (PARA78, PARA78_default);
1489 RTL_W32 (PARA7c, PARA7c_default);
1490 tp->twistie = 0; /* Bail from future actions. */
1491 }
1492 break;
1493 case 2:
1494 /* Read how long it took to hear the echo. */
1495 linkcase = RTL_R16 (CSCR) & CSCR_LinkStatusBits;
1496 if (linkcase == 0x7000)
1497 tp->twist_row = 3;
1498 else if (linkcase == 0x3000)
1499 tp->twist_row = 2;
1500 else if (linkcase == 0x1000)
1501 tp->twist_row = 1;
1502 else
1503 tp->twist_row = 0;
1504 tp->twist_col = 0;
1505 tp->twistie = 3; /* Change to state 2. */
1506 next_tick = HZ / 10;
1507 break;
1508 case 3:
1509 /* Put out four tuning parameters, one per 100msec. */
1510 if (tp->twist_col == 0)
1511 RTL_W16 (FIFOTMS, 0);
1512 RTL_W32 (PARA7c, param[(int) tp->twist_row]
1513 [(int) tp->twist_col]);
1514 next_tick = HZ / 10;
1515 if (++tp->twist_col >= 4) {
1516 /* For short cables we are done.
1517 For long cables (row == 3) check for mistune. */
1518 tp->twistie =
1519 (tp->twist_row == 3) ? 4 : 0;
1520 }
1521 break;
1522 case 4:
1523 /* Special case for long cables: check for mistune. */
1524 if ((RTL_R16 (CSCR) &
1525 CSCR_LinkStatusBits) == 0x7000) {
1526 tp->twistie = 0;
1527 break;
1528 } else {
1529 RTL_W32 (PARA7c, 0xfb38de03);
1530 tp->twistie = 5;
1531 next_tick = HZ / 10;
1532 }
1533 break;
1534 case 5:
1535 /* Retune for shorter cable (column 2). */
1536 RTL_W32 (FIFOTMS, 0x20);
1537 RTL_W32 (PARA78, PARA78_default);
1538 RTL_W32 (PARA7c, PARA7c_default);
1539 RTL_W32 (FIFOTMS, 0x00);
1540 tp->twist_row = 2;
1541 tp->twist_col = 0;
1542 tp->twistie = 3;
1543 next_tick = HZ / 10;
1544 break;
1545
1546 default:
1547 /* do nothing */
1548 break;
1549 }
1550 }
1551 #endif /* CONFIG_8139TOO_TUNE_TWISTER */
1552
1553 static inline void rtl8139_thread_iter (struct net_device *dev,
1554 struct rtl8139_private *tp,
1555 void __iomem *ioaddr)
1556 {
1557 int mii_lpa;
1558
1559 mii_lpa = mdio_read (dev, tp->phys[0], MII_LPA);
1560
1561 if (!tp->mii.force_media && mii_lpa != 0xffff) {
1562 int duplex = (mii_lpa & LPA_100FULL)
1563 || (mii_lpa & 0x01C0) == 0x0040;
1564 if (tp->mii.full_duplex != duplex) {
1565 tp->mii.full_duplex = duplex;
1566
1567 if (mii_lpa) {
1568 printk (KERN_INFO
1569 "%s: Setting %s-duplex based on MII #%d link"
1570 " partner ability of %4.4x.\n",
1571 dev->name,
1572 tp->mii.full_duplex ? "full" : "half",
1573 tp->phys[0], mii_lpa);
1574 } else {
1575 printk(KERN_INFO"%s: media is unconnected, link down, or incompatible connection\n",
1576 dev->name);
1577 }
1578 #if 0
1579 RTL_W8 (Cfg9346, Cfg9346_Unlock);
1580 RTL_W8 (Config1, tp->mii.full_duplex ? 0x60 : 0x20);
1581 RTL_W8 (Cfg9346, Cfg9346_Lock);
1582 #endif
1583 }
1584 }
1585
1586 next_tick = HZ * 60;
1587
1588 rtl8139_tune_twister (dev, tp);
1589
1590 DPRINTK ("%s: Media selection tick, Link partner %4.4x.\n",
1591 dev->name, RTL_R16 (NWayLPAR));
1592 DPRINTK ("%s: Other registers are IntMask %4.4x IntStatus %4.4x\n",
1593 dev->name, RTL_R16 (IntrMask), RTL_R16 (IntrStatus));
1594 DPRINTK ("%s: Chip config %2.2x %2.2x.\n",
1595 dev->name, RTL_R8 (Config0),
1596 RTL_R8 (Config1));
1597 }
1598
1599 static void rtl8139_thread (struct work_struct *work)
1600 {
1601 struct rtl8139_private *tp =
1602 container_of(work, struct rtl8139_private, thread.work);
1603 struct net_device *dev = tp->mii.dev;
1604 unsigned long thr_delay = next_tick;
1605
1606 rtnl_lock();
1607
1608 if (!netif_running(dev))
1609 goto out_unlock;
1610
1611 if (tp->watchdog_fired) {
1612 tp->watchdog_fired = 0;
1613 rtl8139_tx_timeout_task(work);
1614 } else
1615 rtl8139_thread_iter(dev, tp, tp->mmio_addr);
1616
1617 if (tp->have_thread)
1618 schedule_delayed_work(&tp->thread, thr_delay);
1619 out_unlock:
1620 rtnl_unlock ();
1621 }
1622
1623 static void rtl8139_start_thread(struct rtl8139_private *tp)
1624 {
1625 tp->twistie = 0;
1626 if (tp->chipset == CH_8139_K)
1627 tp->twistie = 1;
1628 else if (tp->drv_flags & HAS_LNK_CHNG)
1629 return;
1630
1631 tp->have_thread = 1;
1632 tp->watchdog_fired = 0;
1633
1634 schedule_delayed_work(&tp->thread, next_tick);
1635 }
1636
1637 static inline void rtl8139_tx_clear (struct rtl8139_private *tp)
1638 {
1639 tp->cur_tx = 0;
1640 tp->dirty_tx = 0;
1641
1642 /* XXX account for unsent Tx packets in tp->stats.tx_dropped */
1643 }
1644
1645 static void rtl8139_tx_timeout_task (struct work_struct *work)
1646 {
1647 struct rtl8139_private *tp =
1648 container_of(work, struct rtl8139_private, thread.work);
1649 struct net_device *dev = tp->mii.dev;
1650 void __iomem *ioaddr = tp->mmio_addr;
1651 int i;
1652 u8 tmp8;
1653
1654 printk (KERN_DEBUG "%s: Transmit timeout, status %2.2x %4.4x %4.4x "
1655 "media %2.2x.\n", dev->name, RTL_R8 (ChipCmd),
1656 RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus));
1657 /* Emit info to figure out what went wrong. */
1658 printk (KERN_DEBUG "%s: Tx queue start entry %ld dirty entry %ld.\n",
1659 dev->name, tp->cur_tx, tp->dirty_tx);
1660 for (i = 0; i < NUM_TX_DESC; i++)
1661 printk (KERN_DEBUG "%s: Tx descriptor %d is %8.8lx.%s\n",
1662 dev->name, i, RTL_R32 (TxStatus0 + (i * 4)),
1663 i == tp->dirty_tx % NUM_TX_DESC ?
1664 " (queue head)" : "");
1665
1666 tp->xstats.tx_timeouts++;
1667
1668 /* disable Tx ASAP, if not already */
1669 tmp8 = RTL_R8 (ChipCmd);
1670 if (tmp8 & CmdTxEnb)
1671 RTL_W8 (ChipCmd, CmdRxEnb);
1672
1673 spin_lock_bh(&tp->rx_lock);
1674 /* Disable interrupts by clearing the interrupt mask. */
1675 RTL_W16 (IntrMask, 0x0000);
1676
1677 /* Stop a shared interrupt from scavenging while we are. */
1678 spin_lock_irq(&tp->lock);
1679 rtl8139_tx_clear (tp);
1680 spin_unlock_irq(&tp->lock);
1681
1682 /* ...and finally, reset everything */
1683 if (netif_running(dev)) {
1684 rtl8139_hw_start (dev);
1685 netif_wake_queue (dev);
1686 }
1687 spin_unlock_bh(&tp->rx_lock);
1688 }
1689
1690 static void rtl8139_tx_timeout (struct net_device *dev)
1691 {
1692 struct rtl8139_private *tp = netdev_priv(dev);
1693
1694 tp->watchdog_fired = 1;
1695 if (!tp->have_thread) {
1696 INIT_DELAYED_WORK(&tp->thread, rtl8139_thread);
1697 schedule_delayed_work(&tp->thread, next_tick);
1698 }
1699 }
1700
1701 static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev)
1702 {
1703 struct rtl8139_private *tp = netdev_priv(dev);
1704 void __iomem *ioaddr = tp->mmio_addr;
1705 unsigned int entry;
1706 unsigned int len = skb->len;
1707 unsigned long flags;
1708
1709 /* Calculate the next Tx descriptor entry. */
1710 entry = tp->cur_tx % NUM_TX_DESC;
1711
1712 /* Note: the chip doesn't have auto-pad! */
1713 if (likely(len < TX_BUF_SIZE)) {
1714 if (len < ETH_ZLEN)
1715 memset(tp->tx_buf[entry], 0, ETH_ZLEN);
1716 skb_copy_and_csum_dev(skb, tp->tx_buf[entry]);
1717 dev_kfree_skb(skb);
1718 } else {
1719 dev_kfree_skb(skb);
1720 dev->stats.tx_dropped++;
1721 return 0;
1722 }
1723
1724 spin_lock_irqsave(&tp->lock, flags);
1725 RTL_W32_F (TxStatus0 + (entry * sizeof (u32)),
1726 tp->tx_flag | max(len, (unsigned int)ETH_ZLEN));
1727
1728 dev->trans_start = jiffies;
1729
1730 tp->cur_tx++;
1731 wmb();
1732
1733 if ((tp->cur_tx - NUM_TX_DESC) == tp->dirty_tx)
1734 netif_stop_queue (dev);
1735 spin_unlock_irqrestore(&tp->lock, flags);
1736
1737 if (netif_msg_tx_queued(tp))
1738 printk (KERN_DEBUG "%s: Queued Tx packet size %u to slot %d.\n",
1739 dev->name, len, entry);
1740
1741 return 0;
1742 }
1743
1744
1745 static void rtl8139_tx_interrupt (struct net_device *dev,
1746 struct rtl8139_private *tp,
1747 void __iomem *ioaddr)
1748 {
1749 unsigned long dirty_tx, tx_left;
1750
1751 assert (dev != NULL);
1752 assert (ioaddr != NULL);
1753
1754 dirty_tx = tp->dirty_tx;
1755 tx_left = tp->cur_tx - dirty_tx;
1756 while (tx_left > 0) {
1757 int entry = dirty_tx % NUM_TX_DESC;
1758 int txstatus;
1759
1760 txstatus = RTL_R32 (TxStatus0 + (entry * sizeof (u32)));
1761
1762 if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted)))
1763 break; /* It still hasn't been Txed */
1764
1765 /* Note: TxCarrierLost is always asserted at 100mbps. */
1766 if (txstatus & (TxOutOfWindow | TxAborted)) {
1767 /* There was an major error, log it. */
1768 if (netif_msg_tx_err(tp))
1769 printk(KERN_DEBUG "%s: Transmit error, Tx status %8.8x.\n",
1770 dev->name, txstatus);
1771 dev->stats.tx_errors++;
1772 if (txstatus & TxAborted) {
1773 dev->stats.tx_aborted_errors++;
1774 RTL_W32 (TxConfig, TxClearAbt);
1775 RTL_W16 (IntrStatus, TxErr);
1776 wmb();
1777 }
1778 if (txstatus & TxCarrierLost)
1779 dev->stats.tx_carrier_errors++;
1780 if (txstatus & TxOutOfWindow)
1781 dev->stats.tx_window_errors++;
1782 } else {
1783 if (txstatus & TxUnderrun) {
1784 /* Add 64 to the Tx FIFO threshold. */
1785 if (tp->tx_flag < 0x00300000)
1786 tp->tx_flag += 0x00020000;
1787 dev->stats.tx_fifo_errors++;
1788 }
1789 dev->stats.collisions += (txstatus >> 24) & 15;
1790 dev->stats.tx_bytes += txstatus & 0x7ff;
1791 dev->stats.tx_packets++;
1792 }
1793
1794 dirty_tx++;
1795 tx_left--;
1796 }
1797
1798 #ifndef RTL8139_NDEBUG
1799 if (tp->cur_tx - dirty_tx > NUM_TX_DESC) {
1800 printk (KERN_ERR "%s: Out-of-sync dirty pointer, %ld vs. %ld.\n",
1801 dev->name, dirty_tx, tp->cur_tx);
1802 dirty_tx += NUM_TX_DESC;
1803 }
1804 #endif /* RTL8139_NDEBUG */
1805
1806 /* only wake the queue if we did work, and the queue is stopped */
1807 if (tp->dirty_tx != dirty_tx) {
1808 tp->dirty_tx = dirty_tx;
1809 mb();
1810 netif_wake_queue (dev);
1811 }
1812 }
1813
1814
1815 /* TODO: clean this up! Rx reset need not be this intensive */
1816 static void rtl8139_rx_err (u32 rx_status, struct net_device *dev,
1817 struct rtl8139_private *tp, void __iomem *ioaddr)
1818 {
1819 u8 tmp8;
1820 #ifdef CONFIG_8139_OLD_RX_RESET
1821 int tmp_work;
1822 #endif
1823
1824 if (netif_msg_rx_err (tp))
1825 printk(KERN_DEBUG "%s: Ethernet frame had errors, status %8.8x.\n",
1826 dev->name, rx_status);
1827 dev->stats.rx_errors++;
1828 if (!(rx_status & RxStatusOK)) {
1829 if (rx_status & RxTooLong) {
1830 DPRINTK ("%s: Oversized Ethernet frame, status %4.4x!\n",
1831 dev->name, rx_status);
1832 /* A.C.: The chip hangs here. */
1833 }
1834 if (rx_status & (RxBadSymbol | RxBadAlign))
1835 dev->stats.rx_frame_errors++;
1836 if (rx_status & (RxRunt | RxTooLong))
1837 dev->stats.rx_length_errors++;
1838 if (rx_status & RxCRCErr)
1839 dev->stats.rx_crc_errors++;
1840 } else {
1841 tp->xstats.rx_lost_in_ring++;
1842 }
1843
1844 #ifndef CONFIG_8139_OLD_RX_RESET
1845 tmp8 = RTL_R8 (ChipCmd);
1846 RTL_W8 (ChipCmd, tmp8 & ~CmdRxEnb);
1847 RTL_W8 (ChipCmd, tmp8);
1848 RTL_W32 (RxConfig, tp->rx_config);
1849 tp->cur_rx = 0;
1850 #else
1851 /* Reset the receiver, based on RealTek recommendation. (Bug?) */
1852
1853 /* disable receive */
1854 RTL_W8_F (ChipCmd, CmdTxEnb);
1855 tmp_work = 200;
1856 while (--tmp_work > 0) {
1857 udelay(1);
1858 tmp8 = RTL_R8 (ChipCmd);
1859 if (!(tmp8 & CmdRxEnb))
1860 break;
1861 }
1862 if (tmp_work <= 0)
1863 printk (KERN_WARNING PFX "rx stop wait too long\n");
1864 /* restart receive */
1865 tmp_work = 200;
1866 while (--tmp_work > 0) {
1867 RTL_W8_F (ChipCmd, CmdRxEnb | CmdTxEnb);
1868 udelay(1);
1869 tmp8 = RTL_R8 (ChipCmd);
1870 if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb))
1871 break;
1872 }
1873 if (tmp_work <= 0)
1874 printk (KERN_WARNING PFX "tx/rx enable wait too long\n");
1875
1876 /* and reinitialize all rx related registers */
1877 RTL_W8_F (Cfg9346, Cfg9346_Unlock);
1878 /* Must enable Tx/Rx before setting transfer thresholds! */
1879 RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb);
1880
1881 tp->rx_config = rtl8139_rx_config | AcceptBroadcast | AcceptMyPhys;
1882 RTL_W32 (RxConfig, tp->rx_config);
1883 tp->cur_rx = 0;
1884
1885 DPRINTK("init buffer addresses\n");
1886
1887 /* Lock Config[01234] and BMCR register writes */
1888 RTL_W8 (Cfg9346, Cfg9346_Lock);
1889
1890 /* init Rx ring buffer DMA address */
1891 RTL_W32_F (RxBuf, tp->rx_ring_dma);
1892
1893 /* A.C.: Reset the multicast list. */
1894 __set_rx_mode (dev);
1895 #endif
1896 }
1897
1898 #if RX_BUF_IDX == 3
1899 static inline void wrap_copy(struct sk_buff *skb, const unsigned char *ring,
1900 u32 offset, unsigned int size)
1901 {
1902 u32 left = RX_BUF_LEN - offset;
1903
1904 if (size > left) {
1905 skb_copy_to_linear_data(skb, ring + offset, left);
1906 skb_copy_to_linear_data_offset(skb, left, ring, size - left);
1907 } else
1908 skb_copy_to_linear_data(skb, ring + offset, size);
1909 }
1910 #endif
1911
1912 static void rtl8139_isr_ack(struct rtl8139_private *tp)
1913 {
1914 void __iomem *ioaddr = tp->mmio_addr;
1915 u16 status;
1916
1917 status = RTL_R16 (IntrStatus) & RxAckBits;
1918
1919 /* Clear out errors and receive interrupts */
1920 if (likely(status != 0)) {
1921 if (unlikely(status & (RxFIFOOver | RxOverflow))) {
1922 tp->dev->stats.rx_errors++;
1923 if (status & RxFIFOOver)
1924 tp->dev->stats.rx_fifo_errors++;
1925 }
1926 RTL_W16_F (IntrStatus, RxAckBits);
1927 }
1928 }
1929
1930 static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp,
1931 int budget)
1932 {
1933 void __iomem *ioaddr = tp->mmio_addr;
1934 int received = 0;
1935 unsigned char *rx_ring = tp->rx_ring;
1936 unsigned int cur_rx = tp->cur_rx;
1937 unsigned int rx_size = 0;
1938
1939 DPRINTK ("%s: In rtl8139_rx(), current %4.4x BufAddr %4.4x,"
1940 " free to %4.4x, Cmd %2.2x.\n", dev->name, (u16)cur_rx,
1941 RTL_R16 (RxBufAddr),
1942 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
1943
1944 while (netif_running(dev) && received < budget
1945 && (RTL_R8 (ChipCmd) & RxBufEmpty) == 0) {
1946 u32 ring_offset = cur_rx % RX_BUF_LEN;
1947 u32 rx_status;
1948 unsigned int pkt_size;
1949 struct sk_buff *skb;
1950
1951 rmb();
1952
1953 /* read size+status of next frame from DMA ring buffer */
1954 rx_status = le32_to_cpu (*(__le32 *) (rx_ring + ring_offset));
1955 rx_size = rx_status >> 16;
1956 pkt_size = rx_size - 4;
1957
1958 if (netif_msg_rx_status(tp))
1959 printk(KERN_DEBUG "%s: rtl8139_rx() status %4.4x, size %4.4x,"
1960 " cur %4.4x.\n", dev->name, rx_status,
1961 rx_size, cur_rx);
1962 #if RTL8139_DEBUG > 2
1963 {
1964 int i;
1965 DPRINTK ("%s: Frame contents ", dev->name);
1966 for (i = 0; i < 70; i++)
1967 printk (" %2.2x",
1968 rx_ring[ring_offset + i]);
1969 printk (".\n");
1970 }
1971 #endif
1972
1973 /* Packet copy from FIFO still in progress.
1974 * Theoretically, this should never happen
1975 * since EarlyRx is disabled.
1976 */
1977 if (unlikely(rx_size == 0xfff0)) {
1978 if (!tp->fifo_copy_timeout)
1979 tp->fifo_copy_timeout = jiffies + 2;
1980 else if (time_after(jiffies, tp->fifo_copy_timeout)) {
1981 DPRINTK ("%s: hung FIFO. Reset.", dev->name);
1982 rx_size = 0;
1983 goto no_early_rx;
1984 }
1985 if (netif_msg_intr(tp)) {
1986 printk(KERN_DEBUG "%s: fifo copy in progress.",
1987 dev->name);
1988 }
1989 tp->xstats.early_rx++;
1990 break;
1991 }
1992
1993 no_early_rx:
1994 tp->fifo_copy_timeout = 0;
1995
1996 /* If Rx err or invalid rx_size/rx_status received
1997 * (which happens if we get lost in the ring),
1998 * Rx process gets reset, so we abort any further
1999 * Rx processing.
2000 */
2001 if (unlikely((rx_size > (MAX_ETH_FRAME_SIZE+4)) ||
2002 (rx_size < 8) ||
2003 (!(rx_status & RxStatusOK)))) {
2004 rtl8139_rx_err (rx_status, dev, tp, ioaddr);
2005 received = -1;
2006 goto out;
2007 }
2008
2009 /* Malloc up new buffer, compatible with net-2e. */
2010 /* Omit the four octet CRC from the length. */
2011
2012 skb = dev_alloc_skb (pkt_size + 2);
2013 if (likely(skb)) {
2014 skb_reserve (skb, 2); /* 16 byte align the IP fields. */
2015 #if RX_BUF_IDX == 3
2016 wrap_copy(skb, rx_ring, ring_offset+4, pkt_size);
2017 #else
2018 skb_copy_to_linear_data (skb, &rx_ring[ring_offset + 4], pkt_size);
2019 #endif
2020 skb_put (skb, pkt_size);
2021
2022 skb->protocol = eth_type_trans (skb, dev);
2023
2024 dev->last_rx = jiffies;
2025 dev->stats.rx_bytes += pkt_size;
2026 dev->stats.rx_packets++;
2027
2028 netif_receive_skb (skb);
2029 } else {
2030 if (net_ratelimit())
2031 printk (KERN_WARNING
2032 "%s: Memory squeeze, dropping packet.\n",
2033 dev->name);
2034 dev->stats.rx_dropped++;
2035 }
2036 received++;
2037
2038 cur_rx = (cur_rx + rx_size + 4 + 3) & ~3;
2039 RTL_W16 (RxBufPtr, (u16) (cur_rx - 16));
2040
2041 rtl8139_isr_ack(tp);
2042 }
2043
2044 if (unlikely(!received || rx_size == 0xfff0))
2045 rtl8139_isr_ack(tp);
2046
2047 #if RTL8139_DEBUG > 1
2048 DPRINTK ("%s: Done rtl8139_rx(), current %4.4x BufAddr %4.4x,"
2049 " free to %4.4x, Cmd %2.2x.\n", dev->name, cur_rx,
2050 RTL_R16 (RxBufAddr),
2051 RTL_R16 (RxBufPtr), RTL_R8 (ChipCmd));
2052 #endif
2053
2054 tp->cur_rx = cur_rx;
2055
2056 /*
2057 * The receive buffer should be mostly empty.
2058 * Tell NAPI to reenable the Rx irq.
2059 */
2060 if (tp->fifo_copy_timeout)
2061 received = budget;
2062
2063 out:
2064 return received;
2065 }
2066
2067
2068 static void rtl8139_weird_interrupt (struct net_device *dev,
2069 struct rtl8139_private *tp,
2070 void __iomem *ioaddr,
2071 int status, int link_changed)
2072 {
2073 DPRINTK ("%s: Abnormal interrupt, status %8.8x.\n",
2074 dev->name, status);
2075
2076 assert (dev != NULL);
2077 assert (tp != NULL);
2078 assert (ioaddr != NULL);
2079
2080 /* Update the error count. */
2081 dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2082 RTL_W32 (RxMissed, 0);
2083
2084 if ((status & RxUnderrun) && link_changed &&
2085 (tp->drv_flags & HAS_LNK_CHNG)) {
2086 rtl_check_media(dev, 0);
2087 status &= ~RxUnderrun;
2088 }
2089
2090 if (status & (RxUnderrun | RxErr))
2091 dev->stats.rx_errors++;
2092
2093 if (status & PCSTimeout)
2094 dev->stats.rx_length_errors++;
2095 if (status & RxUnderrun)
2096 dev->stats.rx_fifo_errors++;
2097 if (status & PCIErr) {
2098 u16 pci_cmd_status;
2099 pci_read_config_word (tp->pci_dev, PCI_STATUS, &pci_cmd_status);
2100 pci_write_config_word (tp->pci_dev, PCI_STATUS, pci_cmd_status);
2101
2102 printk (KERN_ERR "%s: PCI Bus error %4.4x.\n",
2103 dev->name, pci_cmd_status);
2104 }
2105 }
2106
2107 static int rtl8139_poll(struct napi_struct *napi, int budget)
2108 {
2109 struct rtl8139_private *tp = container_of(napi, struct rtl8139_private, napi);
2110 struct net_device *dev = tp->dev;
2111 void __iomem *ioaddr = tp->mmio_addr;
2112 int work_done;
2113
2114 spin_lock(&tp->rx_lock);
2115 work_done = 0;
2116 if (likely(RTL_R16(IntrStatus) & RxAckBits))
2117 work_done += rtl8139_rx(dev, tp, budget);
2118
2119 if (work_done < budget) {
2120 unsigned long flags;
2121 /*
2122 * Order is important since data can get interrupted
2123 * again when we think we are done.
2124 */
2125 spin_lock_irqsave(&tp->lock, flags);
2126 RTL_W16_F(IntrMask, rtl8139_intr_mask);
2127 __netif_rx_complete(dev, napi);
2128 spin_unlock_irqrestore(&tp->lock, flags);
2129 }
2130 spin_unlock(&tp->rx_lock);
2131
2132 return work_done;
2133 }
2134
2135 /* The interrupt handler does all of the Rx thread work and cleans up
2136 after the Tx thread. */
2137 static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance)
2138 {
2139 struct net_device *dev = (struct net_device *) dev_instance;
2140 struct rtl8139_private *tp = netdev_priv(dev);
2141 void __iomem *ioaddr = tp->mmio_addr;
2142 u16 status, ackstat;
2143 int link_changed = 0; /* avoid bogus "uninit" warning */
2144 int handled = 0;
2145
2146 spin_lock (&tp->lock);
2147 status = RTL_R16 (IntrStatus);
2148
2149 /* shared irq? */
2150 if (unlikely((status & rtl8139_intr_mask) == 0))
2151 goto out;
2152
2153 handled = 1;
2154
2155 /* h/w no longer present (hotplug?) or major error, bail */
2156 if (unlikely(status == 0xFFFF))
2157 goto out;
2158
2159 /* close possible race's with dev_close */
2160 if (unlikely(!netif_running(dev))) {
2161 RTL_W16 (IntrMask, 0);
2162 goto out;
2163 }
2164
2165 /* Acknowledge all of the current interrupt sources ASAP, but
2166 an first get an additional status bit from CSCR. */
2167 if (unlikely(status & RxUnderrun))
2168 link_changed = RTL_R16 (CSCR) & CSCR_LinkChangeBit;
2169
2170 ackstat = status & ~(RxAckBits | TxErr);
2171 if (ackstat)
2172 RTL_W16 (IntrStatus, ackstat);
2173
2174 /* Receive packets are processed by poll routine.
2175 If not running start it now. */
2176 if (status & RxAckBits){
2177 if (netif_rx_schedule_prep(dev, &tp->napi)) {
2178 RTL_W16_F (IntrMask, rtl8139_norx_intr_mask);
2179 __netif_rx_schedule(dev, &tp->napi);
2180 }
2181 }
2182
2183 /* Check uncommon events with one test. */
2184 if (unlikely(status & (PCIErr | PCSTimeout | RxUnderrun | RxErr)))
2185 rtl8139_weird_interrupt (dev, tp, ioaddr,
2186 status, link_changed);
2187
2188 if (status & (TxOK | TxErr)) {
2189 rtl8139_tx_interrupt (dev, tp, ioaddr);
2190 if (status & TxErr)
2191 RTL_W16 (IntrStatus, TxErr);
2192 }
2193 out:
2194 spin_unlock (&tp->lock);
2195
2196 DPRINTK ("%s: exiting interrupt, intr_status=%#4.4x.\n",
2197 dev->name, RTL_R16 (IntrStatus));
2198 return IRQ_RETVAL(handled);
2199 }
2200
2201 #ifdef CONFIG_NET_POLL_CONTROLLER
2202 /*
2203 * Polling receive - used by netconsole and other diagnostic tools
2204 * to allow network i/o with interrupts disabled.
2205 */
2206 static void rtl8139_poll_controller(struct net_device *dev)
2207 {
2208 disable_irq(dev->irq);
2209 rtl8139_interrupt(dev->irq, dev);
2210 enable_irq(dev->irq);
2211 }
2212 #endif
2213
2214 static int rtl8139_close (struct net_device *dev)
2215 {
2216 struct rtl8139_private *tp = netdev_priv(dev);
2217 void __iomem *ioaddr = tp->mmio_addr;
2218 unsigned long flags;
2219
2220 netif_stop_queue(dev);
2221 napi_disable(&tp->napi);
2222
2223 if (netif_msg_ifdown(tp))
2224 printk(KERN_DEBUG "%s: Shutting down ethercard, status was 0x%4.4x.\n",
2225 dev->name, RTL_R16 (IntrStatus));
2226
2227 spin_lock_irqsave (&tp->lock, flags);
2228
2229 /* Stop the chip's Tx and Rx DMA processes. */
2230 RTL_W8 (ChipCmd, 0);
2231
2232 /* Disable interrupts by clearing the interrupt mask. */
2233 RTL_W16 (IntrMask, 0);
2234
2235 /* Update the error counts. */
2236 dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2237 RTL_W32 (RxMissed, 0);
2238
2239 spin_unlock_irqrestore (&tp->lock, flags);
2240
2241 free_irq (dev->irq, dev);
2242
2243 rtl8139_tx_clear (tp);
2244
2245 dma_free_coherent(&tp->pci_dev->dev, RX_BUF_TOT_LEN,
2246 tp->rx_ring, tp->rx_ring_dma);
2247 dma_free_coherent(&tp->pci_dev->dev, TX_BUF_TOT_LEN,
2248 tp->tx_bufs, tp->tx_bufs_dma);
2249 tp->rx_ring = NULL;
2250 tp->tx_bufs = NULL;
2251
2252 /* Green! Put the chip in low-power mode. */
2253 RTL_W8 (Cfg9346, Cfg9346_Unlock);
2254
2255 if (rtl_chip_info[tp->chipset].flags & HasHltClk)
2256 RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */
2257
2258 return 0;
2259 }
2260
2261
2262 /* Get the ethtool Wake-on-LAN settings. Assumes that wol points to
2263 kernel memory, *wol has been initialized as {ETHTOOL_GWOL}, and
2264 other threads or interrupts aren't messing with the 8139. */
2265 static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2266 {
2267 struct rtl8139_private *np = netdev_priv(dev);
2268 void __iomem *ioaddr = np->mmio_addr;
2269
2270 spin_lock_irq(&np->lock);
2271 if (rtl_chip_info[np->chipset].flags & HasLWake) {
2272 u8 cfg3 = RTL_R8 (Config3);
2273 u8 cfg5 = RTL_R8 (Config5);
2274
2275 wol->supported = WAKE_PHY | WAKE_MAGIC
2276 | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
2277
2278 wol->wolopts = 0;
2279 if (cfg3 & Cfg3_LinkUp)
2280 wol->wolopts |= WAKE_PHY;
2281 if (cfg3 & Cfg3_Magic)
2282 wol->wolopts |= WAKE_MAGIC;
2283 /* (KON)FIXME: See how netdev_set_wol() handles the
2284 following constants. */
2285 if (cfg5 & Cfg5_UWF)
2286 wol->wolopts |= WAKE_UCAST;
2287 if (cfg5 & Cfg5_MWF)
2288 wol->wolopts |= WAKE_MCAST;
2289 if (cfg5 & Cfg5_BWF)
2290 wol->wolopts |= WAKE_BCAST;
2291 }
2292 spin_unlock_irq(&np->lock);
2293 }
2294
2295
2296 /* Set the ethtool Wake-on-LAN settings. Return 0 or -errno. Assumes
2297 that wol points to kernel memory and other threads or interrupts
2298 aren't messing with the 8139. */
2299 static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
2300 {
2301 struct rtl8139_private *np = netdev_priv(dev);
2302 void __iomem *ioaddr = np->mmio_addr;
2303 u32 support;
2304 u8 cfg3, cfg5;
2305
2306 support = ((rtl_chip_info[np->chipset].flags & HasLWake)
2307 ? (WAKE_PHY | WAKE_MAGIC
2308 | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST)
2309 : 0);
2310 if (wol->wolopts & ~support)
2311 return -EINVAL;
2312
2313 spin_lock_irq(&np->lock);
2314 cfg3 = RTL_R8 (Config3) & ~(Cfg3_LinkUp | Cfg3_Magic);
2315 if (wol->wolopts & WAKE_PHY)
2316 cfg3 |= Cfg3_LinkUp;
2317 if (wol->wolopts & WAKE_MAGIC)
2318 cfg3 |= Cfg3_Magic;
2319 RTL_W8 (Cfg9346, Cfg9346_Unlock);
2320 RTL_W8 (Config3, cfg3);
2321 RTL_W8 (Cfg9346, Cfg9346_Lock);
2322
2323 cfg5 = RTL_R8 (Config5) & ~(Cfg5_UWF | Cfg5_MWF | Cfg5_BWF);
2324 /* (KON)FIXME: These are untested. We may have to set the
2325 CRC0, Wakeup0 and LSBCRC0 registers too, but I have no
2326 documentation. */
2327 if (wol->wolopts & WAKE_UCAST)
2328 cfg5 |= Cfg5_UWF;
2329 if (wol->wolopts & WAKE_MCAST)
2330 cfg5 |= Cfg5_MWF;
2331 if (wol->wolopts & WAKE_BCAST)
2332 cfg5 |= Cfg5_BWF;
2333 RTL_W8 (Config5, cfg5); /* need not unlock via Cfg9346 */
2334 spin_unlock_irq(&np->lock);
2335
2336 return 0;
2337 }
2338
2339 static void rtl8139_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
2340 {
2341 struct rtl8139_private *np = netdev_priv(dev);
2342 strcpy(info->driver, DRV_NAME);
2343 strcpy(info->version, DRV_VERSION);
2344 strcpy(info->bus_info, pci_name(np->pci_dev));
2345 info->regdump_len = np->regs_len;
2346 }
2347
2348 static int rtl8139_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
2349 {
2350 struct rtl8139_private *np = netdev_priv(dev);
2351 spin_lock_irq(&np->lock);
2352 mii_ethtool_gset(&np->mii, cmd);
2353 spin_unlock_irq(&np->lock);
2354 return 0;
2355 }
2356
2357 static int rtl8139_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
2358 {
2359 struct rtl8139_private *np = netdev_priv(dev);
2360 int rc;
2361 spin_lock_irq(&np->lock);
2362 rc = mii_ethtool_sset(&np->mii, cmd);
2363 spin_unlock_irq(&np->lock);
2364 return rc;
2365 }
2366
2367 static int rtl8139_nway_reset(struct net_device *dev)
2368 {
2369 struct rtl8139_private *np = netdev_priv(dev);
2370 return mii_nway_restart(&np->mii);
2371 }
2372
2373 static u32 rtl8139_get_link(struct net_device *dev)
2374 {
2375 struct rtl8139_private *np = netdev_priv(dev);
2376 return mii_link_ok(&np->mii);
2377 }
2378
2379 static u32 rtl8139_get_msglevel(struct net_device *dev)
2380 {
2381 struct rtl8139_private *np = netdev_priv(dev);
2382 return np->msg_enable;
2383 }
2384
2385 static void rtl8139_set_msglevel(struct net_device *dev, u32 datum)
2386 {
2387 struct rtl8139_private *np = netdev_priv(dev);
2388 np->msg_enable = datum;
2389 }
2390
2391 static int rtl8139_get_regs_len(struct net_device *dev)
2392 {
2393 struct rtl8139_private *np;
2394 /* TODO: we are too slack to do reg dumping for pio, for now */
2395 if (use_io)
2396 return 0;
2397 np = netdev_priv(dev);
2398 return np->regs_len;
2399 }
2400
2401 static void rtl8139_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
2402 {
2403 struct rtl8139_private *np;
2404
2405 /* TODO: we are too slack to do reg dumping for pio, for now */
2406 if (use_io)
2407 return;
2408 np = netdev_priv(dev);
2409
2410 regs->version = RTL_REGS_VER;
2411
2412 spin_lock_irq(&np->lock);
2413 memcpy_fromio(regbuf, np->mmio_addr, regs->len);
2414 spin_unlock_irq(&np->lock);
2415 }
2416
2417 static int rtl8139_get_sset_count(struct net_device *dev, int sset)
2418 {
2419 switch (sset) {
2420 case ETH_SS_STATS:
2421 return RTL_NUM_STATS;
2422 default:
2423 return -EOPNOTSUPP;
2424 }
2425 }
2426
2427 static void rtl8139_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
2428 {
2429 struct rtl8139_private *np = netdev_priv(dev);
2430
2431 data[0] = np->xstats.early_rx;
2432 data[1] = np->xstats.tx_buf_mapped;
2433 data[2] = np->xstats.tx_timeouts;
2434 data[3] = np->xstats.rx_lost_in_ring;
2435 }
2436
2437 static void rtl8139_get_strings(struct net_device *dev, u32 stringset, u8 *data)
2438 {
2439 memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
2440 }
2441
2442 static const struct ethtool_ops rtl8139_ethtool_ops = {
2443 .get_drvinfo = rtl8139_get_drvinfo,
2444 .get_settings = rtl8139_get_settings,
2445 .set_settings = rtl8139_set_settings,
2446 .get_regs_len = rtl8139_get_regs_len,
2447 .get_regs = rtl8139_get_regs,
2448 .nway_reset = rtl8139_nway_reset,
2449 .get_link = rtl8139_get_link,
2450 .get_msglevel = rtl8139_get_msglevel,
2451 .set_msglevel = rtl8139_set_msglevel,
2452 .get_wol = rtl8139_get_wol,
2453 .set_wol = rtl8139_set_wol,
2454 .get_strings = rtl8139_get_strings,
2455 .get_sset_count = rtl8139_get_sset_count,
2456 .get_ethtool_stats = rtl8139_get_ethtool_stats,
2457 };
2458
2459 static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
2460 {
2461 struct rtl8139_private *np = netdev_priv(dev);
2462 int rc;
2463
2464 if (!netif_running(dev))
2465 return -EINVAL;
2466
2467 spin_lock_irq(&np->lock);
2468 rc = generic_mii_ioctl(&np->mii, if_mii(rq), cmd, NULL);
2469 spin_unlock_irq(&np->lock);
2470
2471 return rc;
2472 }
2473
2474
2475 static struct net_device_stats *rtl8139_get_stats (struct net_device *dev)
2476 {
2477 struct rtl8139_private *tp = netdev_priv(dev);
2478 void __iomem *ioaddr = tp->mmio_addr;
2479 unsigned long flags;
2480
2481 if (netif_running(dev)) {
2482 spin_lock_irqsave (&tp->lock, flags);
2483 dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2484 RTL_W32 (RxMissed, 0);
2485 spin_unlock_irqrestore (&tp->lock, flags);
2486 }
2487
2488 return &dev->stats;
2489 }
2490
2491 /* Set or clear the multicast filter for this adaptor.
2492 This routine is not state sensitive and need not be SMP locked. */
2493
2494 static void __set_rx_mode (struct net_device *dev)
2495 {
2496 struct rtl8139_private *tp = netdev_priv(dev);
2497 void __iomem *ioaddr = tp->mmio_addr;
2498 u32 mc_filter[2]; /* Multicast hash filter */
2499 int i, rx_mode;
2500 u32 tmp;
2501
2502 DPRINTK ("%s: rtl8139_set_rx_mode(%4.4x) done -- Rx config %8.8lx.\n",
2503 dev->name, dev->flags, RTL_R32 (RxConfig));
2504
2505 /* Note: do not reorder, GCC is clever about common statements. */
2506 if (dev->flags & IFF_PROMISC) {
2507 rx_mode =
2508 AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
2509 AcceptAllPhys;
2510 mc_filter[1] = mc_filter[0] = 0xffffffff;
2511 } else if ((dev->mc_count > multicast_filter_limit)
2512 || (dev->flags & IFF_ALLMULTI)) {
2513 /* Too many to filter perfectly -- accept all multicasts. */
2514 rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
2515 mc_filter[1] = mc_filter[0] = 0xffffffff;
2516 } else {
2517 struct dev_mc_list *mclist;
2518 rx_mode = AcceptBroadcast | AcceptMyPhys;
2519 mc_filter[1] = mc_filter[0] = 0;
2520 for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
2521 i++, mclist = mclist->next) {
2522 int bit_nr = ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
2523
2524 mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
2525 rx_mode |= AcceptMulticast;
2526 }
2527 }
2528
2529 /* We can safely update without stopping the chip. */
2530 tmp = rtl8139_rx_config | rx_mode;
2531 if (tp->rx_config != tmp) {
2532 RTL_W32_F (RxConfig, tmp);
2533 tp->rx_config = tmp;
2534 }
2535 RTL_W32_F (MAR0 + 0, mc_filter[0]);
2536 RTL_W32_F (MAR0 + 4, mc_filter[1]);
2537 }
2538
2539 static void rtl8139_set_rx_mode (struct net_device *dev)
2540 {
2541 unsigned long flags;
2542 struct rtl8139_private *tp = netdev_priv(dev);
2543
2544 spin_lock_irqsave (&tp->lock, flags);
2545 __set_rx_mode(dev);
2546 spin_unlock_irqrestore (&tp->lock, flags);
2547 }
2548
2549 #ifdef CONFIG_PM
2550
2551 static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state)
2552 {
2553 struct net_device *dev = pci_get_drvdata (pdev);
2554 struct rtl8139_private *tp = netdev_priv(dev);
2555 void __iomem *ioaddr = tp->mmio_addr;
2556 unsigned long flags;
2557
2558 pci_save_state (pdev);
2559
2560 if (!netif_running (dev))
2561 return 0;
2562
2563 netif_device_detach (dev);
2564
2565 spin_lock_irqsave (&tp->lock, flags);
2566
2567 /* Disable interrupts, stop Tx and Rx. */
2568 RTL_W16 (IntrMask, 0);
2569 RTL_W8 (ChipCmd, 0);
2570
2571 /* Update the error counts. */
2572 dev->stats.rx_missed_errors += RTL_R32 (RxMissed);
2573 RTL_W32 (RxMissed, 0);
2574
2575 spin_unlock_irqrestore (&tp->lock, flags);
2576
2577 pci_set_power_state (pdev, PCI_D3hot);
2578
2579 return 0;
2580 }
2581
2582
2583 static int rtl8139_resume (struct pci_dev *pdev)
2584 {
2585 struct net_device *dev = pci_get_drvdata (pdev);
2586
2587 pci_restore_state (pdev);
2588 if (!netif_running (dev))
2589 return 0;
2590 pci_set_power_state (pdev, PCI_D0);
2591 rtl8139_init_ring (dev);
2592 rtl8139_hw_start (dev);
2593 netif_device_attach (dev);
2594 return 0;
2595 }
2596
2597 #endif /* CONFIG_PM */
2598
2599
2600 static struct pci_driver rtl8139_pci_driver = {
2601 .name = DRV_NAME,
2602 .id_table = rtl8139_pci_tbl,
2603 .probe = rtl8139_init_one,
2604 .remove = __devexit_p(rtl8139_remove_one),
2605 #ifdef CONFIG_PM
2606 .suspend = rtl8139_suspend,
2607 .resume = rtl8139_resume,
2608 #endif /* CONFIG_PM */
2609 };
2610
2611
2612 static int __init rtl8139_init_module (void)
2613 {
2614 /* when we're a module, we always print a version message,
2615 * even if no 8139 board is found.
2616 */
2617 #ifdef MODULE
2618 printk (KERN_INFO RTL8139_DRIVER_NAME "\n");
2619 #endif
2620
2621 return pci_register_driver(&rtl8139_pci_driver);
2622 }
2623
2624
2625 static void __exit rtl8139_cleanup_module (void)
2626 {
2627 pci_unregister_driver (&rtl8139_pci_driver);
2628 }
2629
2630
2631 module_init(rtl8139_init_module);
2632 module_exit(rtl8139_cleanup_module);
Linux kernel - Deliverables
This page took 0.08719 seconds and 5 git commands to generate.