drivers/net/can/sja1000/Kconfig

   1 menuconfig CAN_SJA1000
   2         tristate "Philips/NXP SJA1000 devices"
   3         depends on CAN_DEV && HAS_IOMEM
   4
   5 if CAN_SJA1000
   6
   7 config CAN_SJA1000_ISA
   8         tristate "ISA Bus based legacy SJA1000 driver"
   9         depends on ISA
  10         ---help---
  11           This driver adds legacy support for SJA1000 chips connected to
  12           the ISA bus using I/O port, memory mapped or indirect access.
  13
  14 config CAN_SJA1000_PLATFORM
  15         tristate "Generic Platform Bus based SJA1000 driver"
  16         ---help---
  17           This driver adds support for the SJA1000 chips connected to
  18           the "platform bus" (Linux abstraction for directly to the
  19           processor attached devices).  Which can be found on various
  20           boards from Phytec (http://www.phytec.de) like the PCM027,
  21           PCM038.
  22
  23 config CAN_SJA1000_OF_PLATFORM
  24         tristate "Generic OF Platform Bus based SJA1000 driver"
  25         depends on PPC_OF
  26         ---help---
  27           This driver adds support for the SJA1000 chips connected to
  28           the OpenFirmware "platform bus" found on embedded systems with
  29           OpenFirmware bindings, e.g. if you have a PowerPC based system
  30           you may want to enable this option.
  31
  32 config CAN_EMS_PCI
  33         tristate "EMS CPC-PCI, CPC-PCIe and CPC-104P Card"
  34         depends on PCI
  35         ---help---
  36           This driver is for the one, two or four channel CPC-PCI,
  37           CPC-PCIe and CPC-104P cards from EMS Dr. Thomas Wuensche
  38           (http://www.ems-wuensche.de).
  39
  40 config CAN_KVASER_PCI
  41         tristate "Kvaser PCIcanx and Kvaser PCIcan PCI Cards"
  42         depends on PCI
  43         ---help---
  44           This driver is for the the PCIcanx and PCIcan cards (1, 2 or
  45           4 channel) from Kvaser (http://www.kvaser.com).
  46
  47 config CAN_PLX_PCI
  48         tristate "PLX90xx PCI-bridge based Cards"
  49         depends on PCI
  50         ---help---
  51           This driver is for CAN interface cards based on
  52           the PLX90xx PCI bridge.
  53           Driver supports now:
  54            - Adlink PCI-7841/cPCI-7841 card (http://www.adlinktech.com/)
  55            - Adlink PCI-7841/cPCI-7841 SE card
  56            - esd CAN-PCI/CPCI/PCI104/200 (http://www.esd.eu/)
  57            - esd CAN-PCI/PMC/266
  58            - esd CAN-PCIe/2000
  59            - Marathon CAN-bus-PCI card (http://www.marathon.ru/)
  60            - TEWS TECHNOLOGIES TPMC810 card (http://www.tews.com/)
  61 endif