drivers/net/can/softing/Kconfig

   1 config CAN_SOFTING
   2         tristate "Softing Gmbh CAN generic support"
   3         depends on CAN_DEV
   4         ---help---
   5           Support for CAN cards from Softing Gmbh & some cards
   6           from Vector Gmbh.
   7           Softing Gmbh CAN cards come with 1 or 2 physical busses.
   8           Those cards typically use Dual Port RAM to communicate
   9           with the host CPU. The interface is then identical for PCI
  10           and PCMCIA cards. This driver operates on a platform device,
  11           which has been created by softing_cs or softing_pci driver.
  12           Warning:
  13           The API of the card does not allow fine control per bus, but
  14           controls the 2 busses on the card together.
  15           As such, some actions (start/stop/busoff recovery) on 1 bus
  16           must bring down the other bus too temporarily.
  17
  18 config CAN_SOFTING_CS
  19         tristate "Softing Gmbh CAN pcmcia cards"
  20         depends on PCMCIA
  21         select CAN_SOFTING
  22         ---help---
  23           Support for PCMCIA cards from Softing Gmbh & some cards
  24           from Vector Gmbh.
  25           You need firmware for these, which you can get at
  26           http://developer.berlios.de/projects/socketcan/
  27           This version of the driver is written against
  28           firmware version 4.6 (softing-fw-4.6-binaries.tar.gz)
  29           In order to use the card as CAN device, you need the Softing generic
  30           support too.