net: dsa: Rename DSA probe function.
[deliverable/linux.git] / drivers / net / dsa / mv88e6123.c
1 /*
2 * net/dsa/mv88e6123_61_65.c - Marvell 88e6123/6161/6165 switch chip support
3 * Copyright (c) 2008-2009 Marvell Semiconductor
4 *
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
9 */
10
11 #include <linux/delay.h>
12 #include <linux/jiffies.h>
13 #include <linux/list.h>
14 #include <linux/module.h>
15 #include <linux/netdevice.h>
16 #include <linux/phy.h>
17 #include <net/dsa.h>
18 #include "mv88e6xxx.h"
19
20 static const struct mv88e6xxx_switch_id mv88e6123_table[] = {
21 { PORT_SWITCH_ID_6123, "Marvell 88E6123" },
22 { PORT_SWITCH_ID_6123_A1, "Marvell 88E6123 (A1)" },
23 { PORT_SWITCH_ID_6123_A2, "Marvell 88E6123 (A2)" },
24 { PORT_SWITCH_ID_6161, "Marvell 88E6161" },
25 { PORT_SWITCH_ID_6161_A1, "Marvell 88E6161 (A1)" },
26 { PORT_SWITCH_ID_6161_A2, "Marvell 88E6161 (A2)" },
27 { PORT_SWITCH_ID_6165, "Marvell 88E6165" },
28 { PORT_SWITCH_ID_6165_A1, "Marvell 88E6165 (A1)" },
29 { PORT_SWITCH_ID_6165_A2, "Marvell 88e6165 (A2)" },
30 };
31
32 static char *mv88e6123_drv_probe(struct device *dsa_dev,
33 struct device *host_dev,
34 int sw_addr, void **priv)
35 {
36 return mv88e6xxx_drv_probe(dsa_dev, host_dev, sw_addr, priv,
37 mv88e6123_table,
38 ARRAY_SIZE(mv88e6123_table));
39 }
40
41 static int mv88e6123_setup_global(struct dsa_switch *ds)
42 {
43 u32 upstream_port = dsa_upstream_port(ds);
44 int ret;
45 u32 reg;
46
47 ret = mv88e6xxx_setup_global(ds);
48 if (ret)
49 return ret;
50
51 /* Disable the PHY polling unit (since there won't be any
52 * external PHYs to poll), don't discard packets with
53 * excessive collisions, and mask all interrupt sources.
54 */
55 REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, 0x0000);
56
57 /* Configure the upstream port, and configure the upstream
58 * port as the port to which ingress and egress monitor frames
59 * are to be sent.
60 */
61 reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT |
62 upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT |
63 upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT;
64 REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg);
65
66 /* Disable remote management for now, and set the switch's
67 * DSA device number.
68 */
69 REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, ds->index & 0x1f);
70
71 return 0;
72 }
73
74 static int mv88e6123_setup(struct dsa_switch *ds)
75 {
76 struct mv88e6xxx_priv_state *ps = ds_to_priv(ds);
77 int ret;
78
79 ps->ds = ds;
80
81 ret = mv88e6xxx_setup_common(ds);
82 if (ret < 0)
83 return ret;
84
85 switch (ps->id) {
86 case PORT_SWITCH_ID_6123:
87 ps->num_ports = 3;
88 break;
89 case PORT_SWITCH_ID_6161:
90 case PORT_SWITCH_ID_6165:
91 ps->num_ports = 6;
92 break;
93 default:
94 return -ENODEV;
95 }
96
97 ret = mv88e6xxx_switch_reset(ds, false);
98 if (ret < 0)
99 return ret;
100
101 ret = mv88e6123_setup_global(ds);
102 if (ret < 0)
103 return ret;
104
105 return mv88e6xxx_setup_ports(ds);
106 }
107
108 struct dsa_switch_driver mv88e6123_switch_driver = {
109 .tag_protocol = DSA_TAG_PROTO_EDSA,
110 .probe = mv88e6123_drv_probe,
111 .setup = mv88e6123_setup,
112 .set_addr = mv88e6xxx_set_addr_indirect,
113 .phy_read = mv88e6xxx_phy_read,
114 .phy_write = mv88e6xxx_phy_write,
115 .get_strings = mv88e6xxx_get_strings,
116 .get_ethtool_stats = mv88e6xxx_get_ethtool_stats,
117 .get_sset_count = mv88e6xxx_get_sset_count,
118 .adjust_link = mv88e6xxx_adjust_link,
119 #ifdef CONFIG_NET_DSA_HWMON
120 .get_temp = mv88e6xxx_get_temp,
121 #endif
122 .get_regs_len = mv88e6xxx_get_regs_len,
123 .get_regs = mv88e6xxx_get_regs,
124 };
125
126 MODULE_ALIAS("platform:mv88e6123");
127 MODULE_ALIAS("platform:mv88e6161");
128 MODULE_ALIAS("platform:mv88e6165");
This page took 0.05626 seconds and 5 git commands to generate.