drivers/net/ethernet/8390/Kconfig

   1 #
   2 # 8390 device configuration
   3 #
   4
   5 config NET_VENDOR_8390
   6         bool "National Semi-conductor 8390 devices"
   7         default y
   8         depends on NET_VENDOR_NATSEMI
   9         ---help---
  10           If you have a network (Ethernet) card belonging to this class, say Y
  11           and read the Ethernet-HOWTO, available from
  12           <http://www.tldp.org/docs.html#howto>.
  13
  14           Note that the answer to this question doesn't directly affect the
  15           kernel: saying N will just cause the configurator to skip all
  16           the questions about Western Digital cards. If you say Y, you will be
  17           asked for your specific card in the following questions.
  18
  19 if NET_VENDOR_8390
  20
  21 config PCMCIA_AXNET
  22         tristate "Asix AX88190 PCMCIA support"
  23         depends on PCMCIA
  24         ---help---
  25           Say Y here if you intend to attach an Asix AX88190-based PCMCIA
  26           (PC-card) Fast Ethernet card to your computer.  These cards are
  27           nearly NE2000 compatible but need a separate driver due to a few
  28           misfeatures.
  29
  30           To compile this driver as a module, choose M here: the module will be
  31           called axnet_cs.  If unsure, say N.
  32
  33 config AX88796
  34         tristate "ASIX AX88796 NE2000 clone support"
  35         depends on (ARM || MIPS || SUPERH)
  36         select CRC32
  37         select PHYLIB
  38         select MDIO_BITBANG
  39         ---help---
  40           AX88796 driver, using platform bus to provide
  41           chip detection and resources
  42
  43 config AX88796_93CX6
  44         bool "ASIX AX88796 external 93CX6 eeprom support"
  45         depends on AX88796
  46         select EEPROM_93CX6
  47         ---help---
  48           Select this if your platform comes with an external 93CX6 eeprom.
  49
  50 config HYDRA
  51         tristate "Hydra support"
  52         depends on ZORRO
  53         select CRC32
  54         ---help---
  55           If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
  56
  57           To compile this driver as a module, choose M here: the module
  58           will be called hydra.
  59
  60 config ARM_ETHERH
  61         tristate "I-cubed EtherH/ANT EtherM support"
  62         depends on ARM && ARCH_ACORN
  63         select CRC32
  64         ---help---
  65           If you have an Acorn system with one of these network cards, you
  66           should say Y to this option if you wish to use it with Linux.
  67
  68 config MAC8390
  69         bool "Macintosh NS 8390 based ethernet cards"
  70         depends on MAC
  71         select CRC32
  72         ---help---
  73           If you want to include a driver to support Nubus or LC-PDS
  74           Ethernet cards using an NS8390 chipset or its equivalent, say Y
  75           and read the Ethernet-HOWTO, available from
  76           <http://www.tldp.org/docs.html#howto>.
  77
  78 config MCF8390
  79         tristate "ColdFire NS8390 based Ethernet support"
  80         depends on COLDFIRE
  81         select CRC32
  82         ---help---
  83           This driver is for Ethernet devices using an NS8390-compatible
  84           chipset on many common ColdFire CPU based boards. Many of the older
  85           Freescale dev boards use this, and some other common boards like
  86           some SnapGear routers do as well.
  87
  88           If you have one of these boards and want to use the network interface
  89           on them then choose Y. To compile this driver as a module, choose M
  90           here, the module will be called mcf8390.
  91
  92 config NE2000
  93         tristate "NE2000/NE1000 support"
  94         depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX || \
  95                     ATARI_ETHERNEC)
  96         select CRC32
  97         ---help---
  98           If you have a network (Ethernet) card of this type, say Y and read
  99           the Ethernet-HOWTO, available from
 100           <http://www.tldp.org/docs.html#howto>.  Many Ethernet cards
 101           without a specific driver are compatible with NE2000.
 102
 103           If you have a PCI NE2000 card however, say N here and Y to "PCI
 104           NE2000 and clone support" below.
 105
 106           To compile this driver as a module, choose M here. The module
 107           will be called ne.
 108
 109 config NE2K_PCI
 110         tristate "PCI NE2000 and clones support (see help)"
 111         depends on PCI
 112         select CRC32
 113         ---help---
 114           This driver is for NE2000 compatible PCI cards. It will not work
 115           with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
 116           support" below). If you have a PCI NE2000 network (Ethernet) card,
 117           say Y and read the Ethernet-HOWTO, available from
 118           <http://www.tldp.org/docs.html#howto>.
 119
 120           This driver also works for the following NE2000 clone cards:
 121           RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
 122           NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
 123           Holtek HT80232    Holtek HT80229
 124
 125           To compile this driver as a module, choose M here. The module
 126           will be called ne2k-pci.
 127
 128 config APNE
 129         tristate "PCMCIA NE2000 support"
 130         depends on AMIGA_PCMCIA
 131         select CRC32
 132         ---help---
 133           If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
 134           say N.
 135
 136           To compile this driver as a module, choose M here: the module
 137           will be called apne.
 138
 139 config PCMCIA_PCNET
 140         tristate "NE2000 compatible PCMCIA support"
 141         depends on PCMCIA
 142         select CRC32
 143         ---help---
 144           Say Y here if you intend to attach an NE2000 compatible PCMCIA
 145           (PC-card) Ethernet or Fast Ethernet card to your computer.
 146
 147           To compile this driver as a module, choose M here: the module will be
 148           called pcnet_cs.  If unsure, say N.
 149
 150 config STNIC
 151         tristate "National DP83902AV  support"
 152         depends on SUPERH
 153         select CRC32
 154         ---help---
 155           Support for cards based on the National Semiconductor DP83902AV
 156           ST-NIC Serial Network Interface Controller for Twisted Pair.  This
 157           is a 10Mbit/sec Ethernet controller.  Product overview and specs at
 158           <http://www.national.com/pf/DP/DP83902A.html>.
 159
 160           If unsure, say N.
 161
 162 config ULTRA
 163         tristate "SMC Ultra support"
 164         depends on ISA
 165         select CRC32
 166         ---help---
 167           If you have a network (Ethernet) card of this type, say Y and read
 168           the Ethernet-HOWTO, available from
 169           <http://www.tldp.org/docs.html#howto>.
 170
 171           Important: There have been many reports that, with some motherboards
 172           mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
 173           such as some BusLogic models) causes corruption problems with many
 174           operating systems. The Linux smc-ultra driver has a work-around for
 175           this but keep it in mind if you have such a SCSI card and have
 176           problems.
 177
 178           To compile this driver as a module, choose M here. The module
 179           will be called smc-ultra.
 180
 181 config WD80x3
 182         tristate "WD80*3 support"
 183         depends on ISA
 184         select CRC32
 185         ---help---
 186           If you have a network (Ethernet) card of this type, say Y and read
 187           the Ethernet-HOWTO, available from
 188           <http://www.tldp.org/docs.html#howto>.
 189
 190           To compile this driver as a module, choose M here. The module
 191           will be called wd.
 192
 193 config ZORRO8390
 194         tristate "Zorro NS8390-based Ethernet support"
 195         depends on ZORRO
 196         select CRC32
 197         ---help---
 198           This driver is for Zorro Ethernet cards using an NS8390-compatible
 199           chipset, like the Village Tronic Ariadne II and the Individual
 200           Computers X-Surf Ethernet cards. If you have such a card, say Y.
 201           Otherwise, say N.
 202
 203           To compile this driver as a module, choose M here: the module
 204           will be called zorro8390.
 205
 206 endif # NET_VENDOR_8390