drivers/net/ethernet/8390/Kconfig

   1 #
   2 # 8390 device configuration
   3 #
   4
   5 config NET_VENDOR_8390
   6         bool "National Semi-conductor 8390 devices"
   7         depends on NET_VENDOR_NATSEMI && (AMIGA_PCMCIA || PCI || SUPERH || \
   8                    ISA || MCA || EISA || MAC || M32R || MACH_TX49XX || \
   9                    MCA_LEGACY || H8300 || ARM || MIPS || ZORRO || PCMCIA || \
  10                    EXPERIMENTAL)
  11         ---help---
  12           If you have a network (Ethernet) card belonging to this class, say Y
  13           and read the Ethernet-HOWTO, available from
  14           <http://www.tldp.org/docs.html#howto>.
  15
  16           Note that the answer to this question doesn't directly affect the
  17           kernel: saying N will just cause the configurator to skip all
  18           the questions about Western Digital cards. If you say Y, you will be
  19           asked for your specific card in the following questions.
  20
  21 if NET_VENDOR_8390
  22
  23 config EL2
  24         tristate "3c503 \"EtherLink II\" support"
  25         depends on ISA
  26         select CRC32
  27         ---help---
  28           If you have a network (Ethernet) card of this type, say Y and read
  29           the Ethernet-HOWTO, available from
  30           <http://www.tldp.org/docs.html#howto>.
  31
  32           To compile this driver as a module, choose M here. The module
  33           will be called 3c503.
  34
  35 config AC3200
  36         tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)"
  37         depends on PCI && (ISA || EISA) && EXPERIMENTAL
  38         select CRC32
  39         ---help---
  40           If you have a network (Ethernet) card of this type, say Y and read
  41           the Ethernet-HOWTO, available from
  42           <http://www.tldp.org/docs.html#howto>.
  43
  44           To compile this driver as a module, choose M here. The module
  45           will be called ac3200.
  46
  47 config PCMCIA_AXNET
  48         tristate "Asix AX88190 PCMCIA support"
  49         depends on PCMCIA
  50         ---help---
  51           Say Y here if you intend to attach an Asix AX88190-based PCMCIA
  52           (PC-card) Fast Ethernet card to your computer.  These cards are
  53           nearly NE2000 compatible but need a separate driver due to a few
  54           misfeatures.
  55
  56           To compile this driver as a module, choose M here: the module will be
  57           called axnet_cs.  If unsure, say N.
  58
  59 config AX88796
  60         tristate "ASIX AX88796 NE2000 clone support"
  61         depends on (ARM || MIPS || SUPERH)
  62         select PHYLIB
  63         select MDIO_BITBANG
  64         ---help---
  65           AX88796 driver, using platform bus to provide
  66           chip detection and resources
  67
  68 config AX88796_93CX6
  69         bool "ASIX AX88796 external 93CX6 eeprom support"
  70         depends on AX88796
  71         select EEPROM_93CX6
  72         ---help---
  73           Select this if your platform comes with an external 93CX6 eeprom.
  74
  75 config E2100
  76         tristate "Cabletron E21xx support"
  77         depends on ISA
  78         select CRC32
  79         ---help---
  80           If you have a network (Ethernet) card of this type, say Y and read
  81           the Ethernet-HOWTO, available from
  82           <http://www.tldp.org/docs.html#howto>.
  83
  84           To compile this driver as a module, choose M here. The module
  85           will be called e2100.
  86
  87 config ES3210
  88         tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)"
  89         depends on PCI && EISA && EXPERIMENTAL
  90         select CRC32
  91         ---help---
  92           If you have a network (Ethernet) card of this type, say Y and read
  93           the Ethernet-HOWTO, available from
  94           <http://www.tldp.org/docs.html#howto>.
  95
  96           To compile this driver as a module, choose M here. The module
  97           will be called es3210.
  98
  99 config HPLAN_PLUS
 100         tristate "HP PCLAN+ (27247B and 27252A) support"
 101         depends on ISA
 102         select CRC32
 103         ---help---
 104           If you have a network (Ethernet) card of this type, say Y and read
 105           the Ethernet-HOWTO, available from
 106           <http://www.tldp.org/docs.html#howto>.
 107
 108           To compile this driver as a module, choose M here. The module
 109           will be called hp-plus.
 110
 111 config HPLAN
 112         tristate "HP PCLAN (27245 and other 27xxx series) support"
 113         depends on ISA
 114         select CRC32
 115         ---help---
 116           If you have a network (Ethernet) card of this type, say Y and read
 117           the Ethernet-HOWTO, available from
 118           <http://www.tldp.org/docs.html#howto>.
 119
 120           To compile this driver as a module, choose M here. The module
 121           will be called hp.
 122
 123 config HYDRA
 124         tristate "Hydra support"
 125         depends on ZORRO
 126         select CRC32
 127         ---help---
 128           If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
 129
 130           To compile this driver as a module, choose M here: the module
 131           will be called hydra.
 132
 133 config ARM_ETHERH
 134         tristate "I-cubed EtherH/ANT EtherM support"
 135         depends on ARM && ARCH_ACORN
 136         select CRC32
 137         ---help---
 138           If you have an Acorn system with one of these network cards, you
 139           should say Y to this option if you wish to use it with Linux.
 140
 141 config LNE390
 142         tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)"
 143         depends on PCI && EISA && EXPERIMENTAL
 144         select CRC32
 145         ---help---
 146           If you have a network (Ethernet) card of this type, say Y and read
 147           the Ethernet-HOWTO, available from
 148           <http://www.tldp.org/docs.html#howto>.
 149
 150           To compile this driver as a module, choose M here. The module
 151           will be called lne390.
 152
 153 config MAC8390
 154         bool "Macintosh NS 8390 based ethernet cards"
 155         depends on MAC
 156         select CRC32
 157         ---help---
 158           If you want to include a driver to support Nubus or LC-PDS
 159           Ethernet cards using an NS8390 chipset or its equivalent, say Y
 160           and read the Ethernet-HOWTO, available from
 161           <http://www.tldp.org/docs.html#howto>.
 162
 163 config NE2000
 164         tristate "NE2000/NE1000 support"
 165         depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX)
 166         select CRC32
 167         ---help---
 168           If you have a network (Ethernet) card of this type, say Y and read
 169           the Ethernet-HOWTO, available from
 170           <http://www.tldp.org/docs.html#howto>.  Many Ethernet cards
 171           without a specific driver are compatible with NE2000.
 172
 173           If you have a PCI NE2000 card however, say N here and Y to "PCI
 174           NE2000 and clone support" under "EISA, VLB, PCI and on board
 175           controllers" below. If you have a NE2000 card and are running on
 176           an MCA system (a bus system used on some IBM PS/2 computers and
 177           laptops), say N here and Y to "NE/2 (ne2000 MCA version) support",
 178           below.
 179
 180           To compile this driver as a module, choose M here. The module
 181           will be called ne.
 182
 183 config NE2_MCA
 184         tristate "NE/2 (ne2000 MCA version) support"
 185         depends on MCA_LEGACY
 186         select CRC32
 187         ---help---
 188           If you have a network (Ethernet) card of this type, say Y and read
 189           the Ethernet-HOWTO, available from
 190           <http://www.tldp.org/docs.html#howto>.
 191
 192           To compile this driver as a module, choose M here. The module
 193           will be called ne2.
 194
 195 config NE2K_PCI
 196         tristate "PCI NE2000 and clones support (see help)"
 197         depends on PCI
 198         select CRC32
 199         ---help---
 200           This driver is for NE2000 compatible PCI cards. It will not work
 201           with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
 202           support" below). If you have a PCI NE2000 network (Ethernet) card,
 203           say Y and read the Ethernet-HOWTO, available from
 204           <http://www.tldp.org/docs.html#howto>.
 205
 206           This driver also works for the following NE2000 clone cards:
 207           RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
 208           NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
 209           Holtek HT80232    Holtek HT80229
 210
 211           To compile this driver as a module, choose M here. The module
 212           will be called ne2k-pci.
 213
 214 config APNE
 215         tristate "PCMCIA NE2000 support"
 216         depends on AMIGA_PCMCIA
 217         select CRC32
 218         ---help---
 219           If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
 220           say N.
 221
 222           To compile this driver as a module, choose M here: the module
 223           will be called apne.
 224
 225 config NE3210
 226         tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)"
 227         depends on PCI && EISA && EXPERIMENTAL
 228         select CRC32
 229         ---help---
 230           If you have a network (Ethernet) card of this type, say Y and read
 231           the Ethernet-HOWTO, available from
 232           <http://www.tldp.org/docs.html#howto>.  Note that this driver
 233           will NOT WORK for NE3200 cards as they are completely different.
 234
 235           To compile this driver as a module, choose M here. The module
 236           will be called ne3210.
 237
 238 config PCMCIA_PCNET
 239         tristate "NE2000 compatible PCMCIA support"
 240         depends on PCMCIA
 241         select CRC32
 242         ---help---
 243           Say Y here if you intend to attach an NE2000 compatible PCMCIA
 244           (PC-card) Ethernet or Fast Ethernet card to your computer.
 245
 246           To compile this driver as a module, choose M here: the module will be
 247           called pcnet_cs.  If unsure, say N.
 248
 249 config NE_H8300
 250         tristate "NE2000 compatible support for H8/300"
 251         depends on H8300
 252         ---help---
 253           Say Y here if you want to use the NE2000 compatible
 254           controller on the Renesas H8/300 processor.
 255
 256 config STNIC
 257         tristate "National DP83902AV  support"
 258         depends on SUPERH
 259         select CRC32
 260         ---help---
 261           Support for cards based on the National Semiconductor DP83902AV
 262           ST-NIC Serial Network Interface Controller for Twisted Pair.  This
 263           is a 10Mbit/sec Ethernet controller.  Product overview and specs at
 264           <http://www.national.com/pf/DP/DP83902A.html>.
 265
 266           If unsure, say N.
 267
 268 config ULTRAMCA
 269         tristate "SMC Ultra MCA support"
 270         depends on MCA
 271         select CRC32
 272         ---help---
 273           If you have a network (Ethernet) card of this type and are running
 274           an MCA based system (PS/2), say Y and read the Ethernet-HOWTO,
 275           available from <http://www.tldp.org/docs.html#howto>.
 276
 277           To compile this driver as a module, choose M here. The module
 278           will be called smc-mca.
 279
 280 config ULTRA
 281         tristate "SMC Ultra support"
 282         depends on ISA
 283         select CRC32
 284         ---help---
 285           If you have a network (Ethernet) card of this type, say Y and read
 286           the Ethernet-HOWTO, available from
 287           <http://www.tldp.org/docs.html#howto>.
 288
 289           Important: There have been many reports that, with some motherboards
 290           mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
 291           such as some BusLogic models) causes corruption problems with many
 292           operating systems. The Linux smc-ultra driver has a work-around for
 293           this but keep it in mind if you have such a SCSI card and have
 294           problems.
 295
 296           To compile this driver as a module, choose M here. The module
 297           will be called smc-ultra.
 298
 299 config ULTRA32
 300         tristate "SMC Ultra32 EISA support"
 301         depends on EISA
 302         select CRC32
 303         ---help---
 304           If you have a network (Ethernet) card of this type, say Y and read
 305           the Ethernet-HOWTO, available from
 306           <http://www.tldp.org/docs.html#howto>.
 307
 308           To compile this driver as a module, choose M here. The module
 309           will be called smc-ultra32.
 310
 311 config WD80x3
 312         tristate "WD80*3 support"
 313         depends on ISA
 314         select CRC32
 315         ---help---
 316           If you have a network (Ethernet) card of this type, say Y and read
 317           the Ethernet-HOWTO, available from
 318           <http://www.tldp.org/docs.html#howto>.
 319
 320           To compile this driver as a module, choose M here. The module
 321           will be called wd.
 322
 323 config ZORRO8390
 324         tristate "Zorro NS8390-based Ethernet support"
 325         depends on ZORRO
 326         select CRC32
 327         ---help---
 328           This driver is for Zorro Ethernet cards using an NS8390-compatible
 329           chipset, like the Village Tronic Ariadne II and the Individual
 330           Computers X-Surf Ethernet cards. If you have such a card, say Y.
 331           Otherwise, say N.
 332
 333           To compile this driver as a module, choose M here: the module
 334           will be called zorro8390.
 335
 336 endif # NET_VENDOR_8390