drivers/net/ethernet/amd/Kconfig

   1 #
   2 # AMD network device configuration
   3 #
   4
   5 config NET_VENDOR_AMD
   6         bool "AMD devices"
   7         default y
   8         depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
   9                    SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
  10                    (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA
  11         ---help---
  12           If you have a network (Ethernet) chipset belonging to this class,
  13           say Y.
  14
  15           Note that the answer to this question does not directly affect
  16           the kernel: saying N will just case the configurator to skip all
  17           the questions regarding AMD chipsets. If you say Y, you will be asked
  18           for your specific chipset/driver in the following questions.
  19
  20 if NET_VENDOR_AMD
  21
  22 config A2065
  23         tristate "A2065 support"
  24         depends on ZORRO
  25         select CRC32
  26         ---help---
  27           If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
  28           say N.
  29
  30           To compile this driver as a module, choose M here: the module
  31           will be called a2065.
  32
  33 config AMD8111_ETH
  34         tristate "AMD 8111 (new PCI LANCE) support"
  35         depends on PCI
  36         select CRC32
  37         select NET_CORE
  38         select MII
  39         ---help---
  40           If you have an AMD 8111-based PCI LANCE ethernet card,
  41           answer Y here and read the Ethernet-HOWTO, available from
  42           <http://www.tldp.org/docs.html#howto>.
  43
  44           To compile this driver as a module, choose M here. The module
  45           will be called amd8111e.
  46
  47 config LANCE
  48         tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
  49         depends on ISA && ISA_DMA_API
  50         ---help---
  51           If you have a network (Ethernet) card of this type, say Y and read
  52           the Ethernet-HOWTO, available from
  53           <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
  54           of this type.
  55
  56           To compile this driver as a module, choose M here: the module
  57           will be called lance.  This is recommended.
  58
  59 config PCNET32
  60         tristate "AMD PCnet32 PCI support"
  61         depends on PCI
  62         select CRC32
  63         select NET_CORE
  64         select MII
  65         ---help---
  66           If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
  67           answer Y here and read the Ethernet-HOWTO, available from
  68           <http://www.tldp.org/docs.html#howto>.
  69
  70           To compile this driver as a module, choose M here. The module
  71           will be called pcnet32.
  72
  73 config ARIADNE
  74         tristate "Ariadne support"
  75         depends on ZORRO
  76         ---help---
  77           If you have a Village Tronic Ariadne Ethernet adapter, say Y.
  78           Otherwise, say N.
  79
  80           To compile this driver as a module, choose M here: the module
  81           will be called ariadne.
  82
  83 config ARM_AM79C961A
  84         bool "ARM EBSA110 AM79C961A support"
  85         depends on ARM && ARCH_EBSA110
  86         select CRC32
  87         ---help---
  88           If you wish to compile a kernel for the EBSA-110, then you should
  89           always answer Y to this.
  90
  91 config ATARILANCE
  92         tristate "Atari LANCE support"
  93         depends on ATARI
  94         ---help---
  95           Say Y to include support for several Atari Ethernet adapters based
  96           on the AMD LANCE chipset: RieblCard (with or without battery), or
  97           PAMCard VME (also the version by Rhotron, with different addresses).
  98
  99 config DECLANCE
 100         tristate "DEC LANCE ethernet controller support"
 101         depends on MACH_DECSTATION
 102         select CRC32
 103         ---help---
 104           This driver is for the series of Ethernet controllers produced by
 105           DEC (now Compaq) based on the AMD LANCE chipset, including the
 106           DEPCA series.  (This chipset is better known via the NE2100 cards.)
 107
 108 config HPLANCE
 109         bool "HP on-board LANCE support"
 110         depends on DIO
 111         select CRC32
 112         ---help---
 113           If you want to use the builtin "LANCE" Ethernet controller on an
 114           HP300 machine, say Y here.
 115
 116 config MIPS_AU1X00_ENET
 117         tristate "MIPS AU1000 Ethernet support"
 118         depends on MIPS_ALCHEMY
 119         select PHYLIB
 120         select CRC32
 121         ---help---
 122           If you have an Alchemy Semi AU1X00 based system
 123           say Y.  Otherwise, say N.
 124
 125 config MVME147_NET
 126         tristate "MVME147 (LANCE) Ethernet support"
 127         depends on MVME147
 128         select CRC32
 129         ---help---
 130           Support for the on-board Ethernet interface on the Motorola MVME147
 131           single-board computer.  Say Y here to include the
 132           driver for this chip in your kernel.
 133           To compile this driver as a module, choose M here.
 134
 135 config PCMCIA_NMCLAN
 136         tristate "New Media PCMCIA support"
 137         depends on PCMCIA
 138         help
 139           Say Y here if you intend to attach a New Media Ethernet or LiveWire
 140           PCMCIA (PC-card) Ethernet card to your computer.
 141
 142           To compile this driver as a module, choose M here: the module will be
 143           called nmclan_cs.  If unsure, say N.
 144
 145 config NI65
 146         tristate "NI6510 support"
 147         depends on ISA && ISA_DMA_API
 148         ---help---
 149           If you have a network (Ethernet) card of this type, say Y and read
 150           the Ethernet-HOWTO, available from
 151           <http://www.tldp.org/docs.html#howto>.
 152
 153           To compile this driver as a module, choose M here. The module
 154           will be called ni65.
 155
 156 config SUN3LANCE
 157         tristate "Sun3/Sun3x on-board LANCE support"
 158         depends on (SUN3 || SUN3X)
 159         ---help---
 160           Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
 161           featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
 162           here to compile in the Linux driver for this and enable Ethernet.
 163           General Linux information on the Sun 3 and 3x series (now
 164           discontinued) is at
 165           <http://www.angelfire.com/ca2/tech68k/sun3.html>.
 166
 167           If you're not building a kernel for a Sun 3, say N.
 168
 169 config SUNLANCE
 170         tristate "Sun LANCE support"
 171         depends on SBUS
 172         select CRC32
 173         ---help---
 174           This driver supports the "le" interface present on all 32-bit Sparc
 175           systems, on some older Ultra systems and as an Sbus option.  These
 176           cards are based on the AMD LANCE chipset, which is better known
 177           via the NE2100 cards.
 178
 179           To compile this driver as a module, choose M here: the module
 180           will be called sunlance.
 181
 182 endif # NET_VENDOR_AMD