drivers/net/ethernet/broadcom/Kconfig

   1 #
   2 # Broadcom device configuration
   3 #
   4
   5 config NET_VENDOR_BROADCOM
   6         bool "Broadcom devices"
   7         default y
   8         depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
   9                    SIBYTE_SB1xxx_SOC
  10         ---help---
  11           If you have a network (Ethernet) chipset belonging to this class,
  12           say Y.
  13
  14           Note that the answer to this question does not directly affect
  15           the kernel: saying N will just case the configurator to skip all
  16           the questions regarding AMD chipsets. If you say Y, you will be asked
  17           for your specific chipset/driver in the following questions.
  18
  19 if NET_VENDOR_BROADCOM
  20
  21 config B44
  22         tristate "Broadcom 440x/47xx ethernet support"
  23         depends on SSB_POSSIBLE && HAS_DMA
  24         select SSB
  25         select MII
  26         select PHYLIB
  27         ---help---
  28           If you have a network (Ethernet) controller of this type, say Y
  29           or M here.
  30
  31           To compile this driver as a module, choose M here. The module
  32           will be called b44.
  33
  34 # Auto-select SSB PCI-HOST support, if possible
  35 config B44_PCI_AUTOSELECT
  36         bool
  37         depends on B44 && SSB_PCIHOST_POSSIBLE
  38         select SSB_PCIHOST
  39         default y
  40
  41 # Auto-select SSB PCICORE driver, if possible
  42 config B44_PCICORE_AUTOSELECT
  43         bool
  44         depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
  45         select SSB_DRIVER_PCICORE
  46         default y
  47
  48 config B44_PCI
  49         bool
  50         depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
  51         default y
  52
  53 config BCM63XX_ENET
  54         tristate "Broadcom 63xx internal mac support"
  55         depends on BCM63XX
  56         select MII
  57         select PHYLIB
  58         help
  59           This driver supports the ethernet MACs in the Broadcom 63xx
  60           MIPS chipset family (BCM63XX).
  61
  62 config BCMGENET
  63         tristate "Broadcom GENET internal MAC support"
  64         select MII
  65         select PHYLIB
  66         select FIXED_PHY
  67         select BCM7XXX_PHY
  68         help
  69           This driver supports the built-in Ethernet MACs found in the
  70           Broadcom BCM7xxx Set Top Box family chipset.
  71
  72 config BNX2
  73         tristate "QLogic bnx2 support"
  74         depends on PCI
  75         select CRC32
  76         select FW_LOADER
  77         ---help---
  78           This driver supports QLogic bnx2 gigabit Ethernet cards.
  79
  80           To compile this driver as a module, choose M here: the module
  81           will be called bnx2.  This is recommended.
  82
  83 config CNIC
  84         tristate "QLogic CNIC support"
  85         depends on PCI && (IPV6 || IPV6=n)
  86         select BNX2
  87         select UIO
  88         ---help---
  89           This driver supports offload features of QLogic bnx2 gigabit
  90           Ethernet cards.
  91
  92           To compile this driver as a module, choose M here: the module
  93           will be called cnic.  This is recommended.
  94
  95 config SB1250_MAC
  96         tristate "SB1250 Gigabit Ethernet support"
  97         depends on SIBYTE_SB1xxx_SOC
  98         select PHYLIB
  99         ---help---
 100           This driver supports Gigabit Ethernet interfaces based on the
 101           Broadcom SiByte family of System-On-a-Chip parts.  They include
 102           the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
 103           and BCM1480 chips.
 104
 105           To compile this driver as a module, choose M here: the module
 106           will be called sb1250-mac.
 107
 108 config TIGON3
 109         tristate "Broadcom Tigon3 support"
 110         depends on PCI
 111         select PHYLIB
 112         select HWMON
 113         select PTP_1588_CLOCK
 114         ---help---
 115           This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
 116
 117           To compile this driver as a module, choose M here: the module
 118           will be called tg3.  This is recommended.
 119
 120 config BNX2X
 121         tristate "Broadcom NetXtremeII 10Gb support"
 122         depends on PCI
 123         select PTP_1588_CLOCK
 124         select FW_LOADER
 125         select ZLIB_INFLATE
 126         select LIBCRC32C
 127         select MDIO
 128         ---help---
 129           This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
 130           To compile this driver as a module, choose M here: the module
 131           will be called bnx2x.  This is recommended.
 132
 133 config BNX2X_SRIOV
 134         bool "Broadcom 578xx and 57712 SR-IOV support"
 135         depends on BNX2X && PCI_IOV
 136         default y
 137         ---help---
 138           This configuration parameter enables Single Root Input Output
 139           Virtualization support in the 578xx and 57712 products. This
 140           allows for virtual function acceleration in virtual environments.
 141
 142 config BNX2X_VXLAN
 143         bool "Virtual eXtensible Local Area Network support"
 144         default n
 145         depends on BNX2X && VXLAN && !(BNX2X=y && VXLAN=m)
 146         ---help---
 147           This enables hardward offload support for VXLAN protocol over the
 148           NetXtremeII series adapters.
 149           Say Y here if you want to enable hardware offload support for
 150           Virtual eXtensible Local Area Network (VXLAN) in the driver.
 151
 152 config BGMAC
 153         tristate "BCMA bus GBit core support"
 154         depends on BCMA_HOST_SOC && HAS_DMA && (BCM47XX || ARCH_BCM_5301X)
 155         select PHYLIB
 156         ---help---
 157           This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
 158           They can be found on BCM47xx SoCs and provide gigabit ethernet.
 159           In case of using this driver on BCM4706 it's also requires to enable
 160           BCMA_DRIVER_GMAC_CMN to make it work.
 161
 162 config SYSTEMPORT
 163         tristate "Broadcom SYSTEMPORT internal MAC support"
 164         depends on OF
 165         select MII
 166         select PHYLIB
 167         select FIXED_PHY
 168         help
 169           This driver supports the built-in Ethernet MACs found in the
 170           Broadcom BCM7xxx Set Top Box family chipset using an internal
 171           Ethernet switch.
 172
 173 endif # NET_VENDOR_BROADCOM