projects / deliverable / linux.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Merge tag 'for-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux...
[deliverable/linux.git] / drivers / net / ethernet / dec / tulip / tulip_core.c
1 /* tulip_core.c: A DEC 21x4x-family ethernet driver for Linux.
2
3 Copyright 2000,2001 The Linux Kernel Team
4 Written/copyright 1994-2001 by Donald Becker.
5
6 This software may be used and distributed according to the terms
7 of the GNU General Public License, incorporated herein by reference.
8
9 Please submit bugs to http://bugzilla.kernel.org/ .
10 */
11
12 #define pr_fmt(fmt) "tulip: " fmt
13
14 #define DRV_NAME "tulip"
15 #ifdef CONFIG_TULIP_NAPI
16 #define DRV_VERSION "1.1.15-NAPI" /* Keep at least for test */
17 #else
18 #define DRV_VERSION "1.1.15"
19 #endif
20 #define DRV_RELDATE "Feb 27, 2007"
21
22
23 #include <linux/module.h>
24 #include <linux/pci.h>
25 #include <linux/slab.h>
26 #include "tulip.h"
27 #include <linux/init.h>
28 #include <linux/interrupt.h>
29 #include <linux/etherdevice.h>
30 #include <linux/delay.h>
31 #include <linux/mii.h>
32 #include <linux/crc32.h>
33 #include <asm/unaligned.h>
34 #include <asm/uaccess.h>
35
36 #ifdef CONFIG_SPARC
37 #include <asm/prom.h>
38 #endif
39
40 static char version[] =
41 "Linux Tulip driver version " DRV_VERSION " (" DRV_RELDATE ")\n";
42
43 /* A few user-configurable values. */
44
45 /* Maximum events (Rx packets, etc.) to handle at each interrupt. */
46 static unsigned int max_interrupt_work = 25;
47
48 #define MAX_UNITS 8
49 /* Used to pass the full-duplex flag, etc. */
50 static int full_duplex[MAX_UNITS];
51 static int options[MAX_UNITS];
52 static int mtu[MAX_UNITS]; /* Jumbo MTU for interfaces. */
53
54 /* The possible media types that can be set in options[] are: */
55 const char * const medianame[32] = {
56 "10baseT", "10base2", "AUI", "100baseTx",
57 "10baseT-FDX", "100baseTx-FDX", "100baseT4", "100baseFx",
58 "100baseFx-FDX", "MII 10baseT", "MII 10baseT-FDX", "MII",
59 "10baseT(forced)", "MII 100baseTx", "MII 100baseTx-FDX", "MII 100baseT4",
60 "MII 100baseFx-HDX", "MII 100baseFx-FDX", "Home-PNA 1Mbps", "Invalid-19",
61 "","","","", "","","","", "","","","Transceiver reset",
62 };
63
64 /* Set the copy breakpoint for the copy-only-tiny-buffer Rx structure. */
65 #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) || \
66 defined(CONFIG_SPARC) || defined(__ia64__) || \
67 defined(__sh__) || defined(__mips__)
68 static int rx_copybreak = 1518;
69 #else
70 static int rx_copybreak = 100;
71 #endif
72
73 /*
74 Set the bus performance register.
75 Typical: Set 16 longword cache alignment, no burst limit.
76 Cache alignment bits 15:14 Burst length 13:8
77 0000 No alignment 0x00000000 unlimited 0800 8 longwords
78 4000 8 longwords 0100 1 longword 1000 16 longwords
79 8000 16 longwords 0200 2 longwords 2000 32 longwords
80 C000 32 longwords 0400 4 longwords
81 Warning: many older 486 systems are broken and require setting 0x00A04800
82 8 longword cache alignment, 8 longword burst.
83 ToDo: Non-Intel setting could be better.
84 */
85
86 #if defined(__alpha__) || defined(__ia64__)
87 static int csr0 = 0x01A00000 | 0xE000;
88 #elif defined(__i386__) || defined(__powerpc__) || defined(__x86_64__)
89 static int csr0 = 0x01A00000 | 0x8000;
90 #elif defined(CONFIG_SPARC) || defined(__hppa__)
91 /* The UltraSparc PCI controllers will disconnect at every 64-byte
92 * crossing anyways so it makes no sense to tell Tulip to burst
93 * any more than that.
94 */
95 static int csr0 = 0x01A00000 | 0x9000;
96 #elif defined(__arm__) || defined(__sh__)
97 static int csr0 = 0x01A00000 | 0x4800;
98 #elif defined(__mips__)
99 static int csr0 = 0x00200000 | 0x4000;
100 #else
101 #warning Processor architecture undefined!
102 static int csr0 = 0x00A00000 | 0x4800;
103 #endif
104
105 /* Operational parameters that usually are not changed. */
106 /* Time in jiffies before concluding the transmitter is hung. */
107 #define TX_TIMEOUT (4*HZ)
108
109
110 MODULE_AUTHOR("The Linux Kernel Team");
111 MODULE_DESCRIPTION("Digital 21*4* Tulip ethernet driver");
112 MODULE_LICENSE("GPL");
113 MODULE_VERSION(DRV_VERSION);
114 module_param(tulip_debug, int, 0);
115 module_param(max_interrupt_work, int, 0);
116 module_param(rx_copybreak, int, 0);
117 module_param(csr0, int, 0);
118 module_param_array(options, int, NULL, 0);
119 module_param_array(full_duplex, int, NULL, 0);
120
121 #ifdef TULIP_DEBUG
122 int tulip_debug = TULIP_DEBUG;
123 #else
124 int tulip_debug = 1;
125 #endif
126
127 static void tulip_timer(unsigned long data)
128 {
129 struct net_device *dev = (struct net_device *)data;
130 struct tulip_private *tp = netdev_priv(dev);
131
132 if (netif_running(dev))
133 schedule_work(&tp->media_work);
134 }
135
136 /*
137 * This table use during operation for capabilities and media timer.
138 *
139 * It is indexed via the values in 'enum chips'
140 */
141
142 struct tulip_chip_table tulip_tbl[] = {
143 { }, /* placeholder for array, slot unused currently */
144 { }, /* placeholder for array, slot unused currently */
145
146 /* DC21140 */
147 { "Digital DS21140 Tulip", 128, 0x0001ebef,
148 HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_PCI_MWI, tulip_timer,
149 tulip_media_task },
150
151 /* DC21142, DC21143 */
152 { "Digital DS21142/43 Tulip", 128, 0x0801fbff,
153 HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI | HAS_NWAY
154 | HAS_INTR_MITIGATION | HAS_PCI_MWI, tulip_timer, t21142_media_task },
155
156 /* LC82C168 */
157 { "Lite-On 82c168 PNIC", 256, 0x0001fbef,
158 HAS_MII | HAS_PNICNWAY, pnic_timer, },
159
160 /* MX98713 */
161 { "Macronix 98713 PMAC", 128, 0x0001ebef,
162 HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer, },
163
164 /* MX98715 */
165 { "Macronix 98715 PMAC", 256, 0x0001ebef,
166 HAS_MEDIA_TABLE, mxic_timer, },
167
168 /* MX98725 */
169 { "Macronix 98725 PMAC", 256, 0x0001ebef,
170 HAS_MEDIA_TABLE, mxic_timer, },
171
172 /* AX88140 */
173 { "ASIX AX88140", 128, 0x0001fbff,
174 HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | MC_HASH_ONLY
175 | IS_ASIX, tulip_timer, tulip_media_task },
176
177 /* PNIC2 */
178 { "Lite-On PNIC-II", 256, 0x0801fbff,
179 HAS_MII | HAS_NWAY | HAS_8023X | HAS_PCI_MWI, pnic2_timer, },
180
181 /* COMET */
182 { "ADMtek Comet", 256, 0x0001abef,
183 HAS_MII | MC_HASH_ONLY | COMET_MAC_ADDR, comet_timer, },
184
185 /* COMPEX9881 */
186 { "Compex 9881 PMAC", 128, 0x0001ebef,
187 HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM, mxic_timer, },
188
189 /* I21145 */
190 { "Intel DS21145 Tulip", 128, 0x0801fbff,
191 HAS_MII | HAS_MEDIA_TABLE | ALWAYS_CHECK_MII | HAS_ACPI
192 | HAS_NWAY | HAS_PCI_MWI, tulip_timer, tulip_media_task },
193
194 /* DM910X */
195 #ifdef CONFIG_TULIP_DM910X
196 { "Davicom DM9102/DM9102A", 128, 0x0001ebef,
197 HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI,
198 tulip_timer, tulip_media_task },
199 #else
200 { NULL },
201 #endif
202
203 /* RS7112 */
204 { "Conexant LANfinity", 256, 0x0001ebef,
205 HAS_MII | HAS_ACPI, tulip_timer, tulip_media_task },
206
207 };
208
209
210 static const struct pci_device_id tulip_pci_tbl[] = {
211 { 0x1011, 0x0009, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21140 },
212 { 0x1011, 0x0019, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DC21143 },
213 { 0x11AD, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, LC82C168 },
214 { 0x10d9, 0x0512, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98713 },
215 { 0x10d9, 0x0531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 },
216 /* { 0x10d9, 0x0531, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98725 },*/
217 { 0x125B, 0x1400, PCI_ANY_ID, PCI_ANY_ID, 0, 0, AX88140 },
218 { 0x11AD, 0xc115, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PNIC2 },
219 { 0x1317, 0x0981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
220 { 0x1317, 0x0985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
221 { 0x1317, 0x1985, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
222 { 0x1317, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
223 { 0x13D1, 0xAB02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
224 { 0x13D1, 0xAB03, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
225 { 0x13D1, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
226 { 0x104A, 0x0981, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
227 { 0x104A, 0x2774, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
228 { 0x1259, 0xa120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
229 { 0x11F6, 0x9881, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMPEX9881 },
230 { 0x8086, 0x0039, PCI_ANY_ID, PCI_ANY_ID, 0, 0, I21145 },
231 #ifdef CONFIG_TULIP_DM910X
232 { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },
233 { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X },
234 #endif
235 { 0x1113, 0x1216, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
236 { 0x1113, 0x1217, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 },
237 { 0x1113, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
238 { 0x1186, 0x1541, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
239 { 0x1186, 0x1561, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
240 { 0x1186, 0x1591, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
241 { 0x14f1, 0x1803, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CONEXANT },
242 { 0x1626, 0x8410, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
243 { 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
244 { 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
245 { 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
246 { 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */
247 { 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */
248 { 0x1414, 0x0001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Microsoft MN-120 */
249 { 0x1414, 0x0002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
250 { } /* terminate list */
251 };
252 MODULE_DEVICE_TABLE(pci, tulip_pci_tbl);
253
254
255 /* A full-duplex map for media types. */
256 const char tulip_media_cap[32] =
257 {0,0,0,16, 3,19,16,24, 27,4,7,5, 0,20,23,20, 28,31,0,0, };
258
259 static void tulip_tx_timeout(struct net_device *dev);
260 static void tulip_init_ring(struct net_device *dev);
261 static void tulip_free_ring(struct net_device *dev);
262 static netdev_tx_t tulip_start_xmit(struct sk_buff *skb,
263 struct net_device *dev);
264 static int tulip_open(struct net_device *dev);
265 static int tulip_close(struct net_device *dev);
266 static void tulip_up(struct net_device *dev);
267 static void tulip_down(struct net_device *dev);
268 static struct net_device_stats *tulip_get_stats(struct net_device *dev);
269 static int private_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
270 static void set_rx_mode(struct net_device *dev);
271 static void tulip_set_wolopts(struct pci_dev *pdev, u32 wolopts);
272 #ifdef CONFIG_NET_POLL_CONTROLLER
273 static void poll_tulip(struct net_device *dev);
274 #endif
275
276 static void tulip_set_power_state (struct tulip_private *tp,
277 int sleep, int snooze)
278 {
279 if (tp->flags & HAS_ACPI) {
280 u32 tmp, newtmp;
281 pci_read_config_dword (tp->pdev, CFDD, &tmp);
282 newtmp = tmp & ~(CFDD_Sleep | CFDD_Snooze);
283 if (sleep)
284 newtmp |= CFDD_Sleep;
285 else if (snooze)
286 newtmp |= CFDD_Snooze;
287 if (tmp != newtmp)
288 pci_write_config_dword (tp->pdev, CFDD, newtmp);
289 }
290
291 }
292
293
294 static void tulip_up(struct net_device *dev)
295 {
296 struct tulip_private *tp = netdev_priv(dev);
297 void __iomem *ioaddr = tp->base_addr;
298 int next_tick = 3*HZ;
299 u32 reg;
300 int i;
301
302 #ifdef CONFIG_TULIP_NAPI
303 napi_enable(&tp->napi);
304 #endif
305
306 /* Wake the chip from sleep/snooze mode. */
307 tulip_set_power_state (tp, 0, 0);
308
309 /* Disable all WOL events */
310 pci_enable_wake(tp->pdev, PCI_D3hot, 0);
311 pci_enable_wake(tp->pdev, PCI_D3cold, 0);
312 tulip_set_wolopts(tp->pdev, 0);
313
314 /* On some chip revs we must set the MII/SYM port before the reset!? */
315 if (tp->mii_cnt || (tp->mtable && tp->mtable->has_mii))
316 iowrite32(0x00040000, ioaddr + CSR6);
317
318 /* Reset the chip, holding bit 0 set at least 50 PCI cycles. */
319 iowrite32(0x00000001, ioaddr + CSR0);
320 pci_read_config_dword(tp->pdev, PCI_COMMAND, &reg); /* flush write */
321 udelay(100);
322
323 /* Deassert reset.
324 Wait the specified 50 PCI cycles after a reset by initializing
325 Tx and Rx queues and the address filter list. */
326 iowrite32(tp->csr0, ioaddr + CSR0);
327 pci_read_config_dword(tp->pdev, PCI_COMMAND, &reg); /* flush write */
328 udelay(100);
329
330 if (tulip_debug > 1)
331 netdev_dbg(dev, "tulip_up(), irq==%d\n", tp->pdev->irq);
332
333 iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
334 iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
335 tp->cur_rx = tp->cur_tx = 0;
336 tp->dirty_rx = tp->dirty_tx = 0;
337
338 if (tp->flags & MC_HASH_ONLY) {
339 u32 addr_low = get_unaligned_le32(dev->dev_addr);
340 u32 addr_high = get_unaligned_le16(dev->dev_addr + 4);
341 if (tp->chip_id == AX88140) {
342 iowrite32(0, ioaddr + CSR13);
343 iowrite32(addr_low, ioaddr + CSR14);
344 iowrite32(1, ioaddr + CSR13);
345 iowrite32(addr_high, ioaddr + CSR14);
346 } else if (tp->flags & COMET_MAC_ADDR) {
347 iowrite32(addr_low, ioaddr + 0xA4);
348 iowrite32(addr_high, ioaddr + 0xA8);
349 iowrite32(0, ioaddr + CSR27);
350 iowrite32(0, ioaddr + CSR28);
351 }
352 } else {
353 /* This is set_rx_mode(), but without starting the transmitter. */
354 u16 *eaddrs = (u16 *)dev->dev_addr;
355 u16 *setup_frm = &tp->setup_frame[15*6];
356 dma_addr_t mapping;
357
358 /* 21140 bug: you must add the broadcast address. */
359 memset(tp->setup_frame, 0xff, sizeof(tp->setup_frame));
360 /* Fill the final entry of the table with our physical address. */
361 *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0];
362 *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1];
363 *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2];
364
365 mapping = pci_map_single(tp->pdev, tp->setup_frame,
366 sizeof(tp->setup_frame),
367 PCI_DMA_TODEVICE);
368 tp->tx_buffers[tp->cur_tx].skb = NULL;
369 tp->tx_buffers[tp->cur_tx].mapping = mapping;
370
371 /* Put the setup frame on the Tx list. */
372 tp->tx_ring[tp->cur_tx].length = cpu_to_le32(0x08000000 | 192);
373 tp->tx_ring[tp->cur_tx].buffer1 = cpu_to_le32(mapping);
374 tp->tx_ring[tp->cur_tx].status = cpu_to_le32(DescOwned);
375
376 tp->cur_tx++;
377 }
378
379 tp->saved_if_port = dev->if_port;
380 if (dev->if_port == 0)
381 dev->if_port = tp->default_port;
382
383 /* Allow selecting a default media. */
384 i = 0;
385 if (tp->mtable == NULL)
386 goto media_picked;
387 if (dev->if_port) {
388 int looking_for = tulip_media_cap[dev->if_port] & MediaIsMII ? 11 :
389 (dev->if_port == 12 ? 0 : dev->if_port);
390 for (i = 0; i < tp->mtable->leafcount; i++)
391 if (tp->mtable->mleaf[i].media == looking_for) {
392 dev_info(&dev->dev,
393 "Using user-specified media %s\n",
394 medianame[dev->if_port]);
395 goto media_picked;
396 }
397 }
398 if ((tp->mtable->defaultmedia & 0x0800) == 0) {
399 int looking_for = tp->mtable->defaultmedia & MEDIA_MASK;
400 for (i = 0; i < tp->mtable->leafcount; i++)
401 if (tp->mtable->mleaf[i].media == looking_for) {
402 dev_info(&dev->dev,
403 "Using EEPROM-set media %s\n",
404 medianame[looking_for]);
405 goto media_picked;
406 }
407 }
408 /* Start sensing first non-full-duplex media. */
409 for (i = tp->mtable->leafcount - 1;
410 (tulip_media_cap[tp->mtable->mleaf[i].media] & MediaAlwaysFD) && i > 0; i--)
411 ;
412 media_picked:
413
414 tp->csr6 = 0;
415 tp->cur_index = i;
416 tp->nwayset = 0;
417
418 if (dev->if_port) {
419 if (tp->chip_id == DC21143 &&
420 (tulip_media_cap[dev->if_port] & MediaIsMII)) {
421 /* We must reset the media CSRs when we force-select MII mode. */
422 iowrite32(0x0000, ioaddr + CSR13);
423 iowrite32(0x0000, ioaddr + CSR14);
424 iowrite32(0x0008, ioaddr + CSR15);
425 }
426 tulip_select_media(dev, 1);
427 } else if (tp->chip_id == DC21142) {
428 if (tp->mii_cnt) {
429 tulip_select_media(dev, 1);
430 if (tulip_debug > 1)
431 dev_info(&dev->dev,
432 "Using MII transceiver %d, status %04x\n",
433 tp->phys[0],
434 tulip_mdio_read(dev, tp->phys[0], 1));
435 iowrite32(csr6_mask_defstate, ioaddr + CSR6);
436 tp->csr6 = csr6_mask_hdcap;
437 dev->if_port = 11;
438 iowrite32(0x0000, ioaddr + CSR13);
439 iowrite32(0x0000, ioaddr + CSR14);
440 } else
441 t21142_start_nway(dev);
442 } else if (tp->chip_id == PNIC2) {
443 /* for initial startup advertise 10/100 Full and Half */
444 tp->sym_advertise = 0x01E0;
445 /* enable autonegotiate end interrupt */
446 iowrite32(ioread32(ioaddr+CSR5)| 0x00008010, ioaddr + CSR5);
447 iowrite32(ioread32(ioaddr+CSR7)| 0x00008010, ioaddr + CSR7);
448 pnic2_start_nway(dev);
449 } else if (tp->chip_id == LC82C168 && ! tp->medialock) {
450 if (tp->mii_cnt) {
451 dev->if_port = 11;
452 tp->csr6 = 0x814C0000 | (tp->full_duplex ? 0x0200 : 0);
453 iowrite32(0x0001, ioaddr + CSR15);
454 } else if (ioread32(ioaddr + CSR5) & TPLnkPass)
455 pnic_do_nway(dev);
456 else {
457 /* Start with 10mbps to do autonegotiation. */
458 iowrite32(0x32, ioaddr + CSR12);
459 tp->csr6 = 0x00420000;
460 iowrite32(0x0001B078, ioaddr + 0xB8);
461 iowrite32(0x0201B078, ioaddr + 0xB8);
462 next_tick = 1*HZ;
463 }
464 } else if ((tp->chip_id == MX98713 || tp->chip_id == COMPEX9881) &&
465 ! tp->medialock) {
466 dev->if_port = 0;
467 tp->csr6 = 0x01880000 | (tp->full_duplex ? 0x0200 : 0);
468 iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80);
469 } else if (tp->chip_id == MX98715 || tp->chip_id == MX98725) {
470 /* Provided by BOLO, Macronix - 12/10/1998. */
471 dev->if_port = 0;
472 tp->csr6 = 0x01a80200;
473 iowrite32(0x0f370000 | ioread16(ioaddr + 0x80), ioaddr + 0x80);
474 iowrite32(0x11000 | ioread16(ioaddr + 0xa0), ioaddr + 0xa0);
475 } else if (tp->chip_id == COMET || tp->chip_id == CONEXANT) {
476 /* Enable automatic Tx underrun recovery. */
477 iowrite32(ioread32(ioaddr + 0x88) | 1, ioaddr + 0x88);
478 dev->if_port = tp->mii_cnt ? 11 : 0;
479 tp->csr6 = 0x00040000;
480 } else if (tp->chip_id == AX88140) {
481 tp->csr6 = tp->mii_cnt ? 0x00040100 : 0x00000100;
482 } else
483 tulip_select_media(dev, 1);
484
485 /* Start the chip's Tx to process setup frame. */
486 tulip_stop_rxtx(tp);
487 barrier();
488 udelay(5);
489 iowrite32(tp->csr6 | TxOn, ioaddr + CSR6);
490
491 /* Enable interrupts by setting the interrupt mask. */
492 iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR5);
493 iowrite32(tulip_tbl[tp->chip_id].valid_intrs, ioaddr + CSR7);
494 tulip_start_rxtx(tp);
495 iowrite32(0, ioaddr + CSR2); /* Rx poll demand */
496
497 if (tulip_debug > 2) {
498 netdev_dbg(dev, "Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n",
499 ioread32(ioaddr + CSR0),
500 ioread32(ioaddr + CSR5),
501 ioread32(ioaddr + CSR6));
502 }
503
504 /* Set the timer to switch to check for link beat and perhaps switch
505 to an alternate media type. */
506 tp->timer.expires = RUN_AT(next_tick);
507 add_timer(&tp->timer);
508 #ifdef CONFIG_TULIP_NAPI
509 init_timer(&tp->oom_timer);
510 tp->oom_timer.data = (unsigned long)dev;
511 tp->oom_timer.function = oom_timer;
512 #endif
513 }
514
515 static int
516 tulip_open(struct net_device *dev)
517 {
518 struct tulip_private *tp = netdev_priv(dev);
519 int retval;
520
521 tulip_init_ring (dev);
522
523 retval = request_irq(tp->pdev->irq, tulip_interrupt, IRQF_SHARED,
524 dev->name, dev);
525 if (retval)
526 goto free_ring;
527
528 tulip_up (dev);
529
530 netif_start_queue (dev);
531
532 return 0;
533
534 free_ring:
535 tulip_free_ring (dev);
536 return retval;
537 }
538
539
540 static void tulip_tx_timeout(struct net_device *dev)
541 {
542 struct tulip_private *tp = netdev_priv(dev);
543 void __iomem *ioaddr = tp->base_addr;
544 unsigned long flags;
545
546 spin_lock_irqsave (&tp->lock, flags);
547
548 if (tulip_media_cap[dev->if_port] & MediaIsMII) {
549 /* Do nothing -- the media monitor should handle this. */
550 if (tulip_debug > 1)
551 dev_warn(&dev->dev,
552 "Transmit timeout using MII device\n");
553 } else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 ||
554 tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 ||
555 tp->chip_id == DM910X) {
556 dev_warn(&dev->dev,
557 "21140 transmit timed out, status %08x, SIA %08x %08x %08x %08x, resetting...\n",
558 ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
559 ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14),
560 ioread32(ioaddr + CSR15));
561 tp->timeout_recovery = 1;
562 schedule_work(&tp->media_work);
563 goto out_unlock;
564 } else if (tp->chip_id == PNIC2) {
565 dev_warn(&dev->dev,
566 "PNIC2 transmit timed out, status %08x, CSR6/7 %08x / %08x CSR12 %08x, resetting...\n",
567 (int)ioread32(ioaddr + CSR5),
568 (int)ioread32(ioaddr + CSR6),
569 (int)ioread32(ioaddr + CSR7),
570 (int)ioread32(ioaddr + CSR12));
571 } else {
572 dev_warn(&dev->dev,
573 "Transmit timed out, status %08x, CSR12 %08x, resetting...\n",
574 ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
575 dev->if_port = 0;
576 }
577
578 #if defined(way_too_many_messages)
579 if (tulip_debug > 3) {
580 int i;
581 for (i = 0; i < RX_RING_SIZE; i++) {
582 u8 *buf = (u8 *)(tp->rx_ring[i].buffer1);
583 int j;
584 printk(KERN_DEBUG
585 "%2d: %08x %08x %08x %08x %02x %02x %02x\n",
586 i,
587 (unsigned int)tp->rx_ring[i].status,
588 (unsigned int)tp->rx_ring[i].length,
589 (unsigned int)tp->rx_ring[i].buffer1,
590 (unsigned int)tp->rx_ring[i].buffer2,
591 buf[0], buf[1], buf[2]);
592 for (j = 0; ((j < 1600) && buf[j] != 0xee); j++)
593 if (j < 100)
594 pr_cont(" %02x", buf[j]);
595 pr_cont(" j=%d\n", j);
596 }
597 printk(KERN_DEBUG " Rx ring %p: ", tp->rx_ring);
598 for (i = 0; i < RX_RING_SIZE; i++)
599 pr_cont(" %08x", (unsigned int)tp->rx_ring[i].status);
600 printk(KERN_DEBUG " Tx ring %p: ", tp->tx_ring);
601 for (i = 0; i < TX_RING_SIZE; i++)
602 pr_cont(" %08x", (unsigned int)tp->tx_ring[i].status);
603 pr_cont("\n");
604 }
605 #endif
606
607 tulip_tx_timeout_complete(tp, ioaddr);
608
609 out_unlock:
610 spin_unlock_irqrestore (&tp->lock, flags);
611 dev->trans_start = jiffies; /* prevent tx timeout */
612 netif_wake_queue (dev);
613 }
614
615
616 /* Initialize the Rx and Tx rings, along with various 'dev' bits. */
617 static void tulip_init_ring(struct net_device *dev)
618 {
619 struct tulip_private *tp = netdev_priv(dev);
620 int i;
621
622 tp->susp_rx = 0;
623 tp->ttimer = 0;
624 tp->nir = 0;
625
626 for (i = 0; i < RX_RING_SIZE; i++) {
627 tp->rx_ring[i].status = 0x00000000;
628 tp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ);
629 tp->rx_ring[i].buffer2 = cpu_to_le32(tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * (i + 1));
630 tp->rx_buffers[i].skb = NULL;
631 tp->rx_buffers[i].mapping = 0;
632 }
633 /* Mark the last entry as wrapping the ring. */
634 tp->rx_ring[i-1].length = cpu_to_le32(PKT_BUF_SZ | DESC_RING_WRAP);
635 tp->rx_ring[i-1].buffer2 = cpu_to_le32(tp->rx_ring_dma);
636
637 for (i = 0; i < RX_RING_SIZE; i++) {
638 dma_addr_t mapping;
639
640 /* Note the receive buffer must be longword aligned.
641 netdev_alloc_skb() provides 16 byte alignment. But do *not*
642 use skb_reserve() to align the IP header! */
643 struct sk_buff *skb = netdev_alloc_skb(dev, PKT_BUF_SZ);
644 tp->rx_buffers[i].skb = skb;
645 if (skb == NULL)
646 break;
647 mapping = pci_map_single(tp->pdev, skb->data,
648 PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
649 tp->rx_buffers[i].mapping = mapping;
650 tp->rx_ring[i].status = cpu_to_le32(DescOwned); /* Owned by Tulip chip */
651 tp->rx_ring[i].buffer1 = cpu_to_le32(mapping);
652 }
653 tp->dirty_rx = (unsigned int)(i - RX_RING_SIZE);
654
655 /* The Tx buffer descriptor is filled in as needed, but we
656 do need to clear the ownership bit. */
657 for (i = 0; i < TX_RING_SIZE; i++) {
658 tp->tx_buffers[i].skb = NULL;
659 tp->tx_buffers[i].mapping = 0;
660 tp->tx_ring[i].status = 0x00000000;
661 tp->tx_ring[i].buffer2 = cpu_to_le32(tp->tx_ring_dma + sizeof(struct tulip_tx_desc) * (i + 1));
662 }
663 tp->tx_ring[i-1].buffer2 = cpu_to_le32(tp->tx_ring_dma);
664 }
665
666 static netdev_tx_t
667 tulip_start_xmit(struct sk_buff *skb, struct net_device *dev)
668 {
669 struct tulip_private *tp = netdev_priv(dev);
670 int entry;
671 u32 flag;
672 dma_addr_t mapping;
673 unsigned long flags;
674
675 spin_lock_irqsave(&tp->lock, flags);
676
677 /* Calculate the next Tx descriptor entry. */
678 entry = tp->cur_tx % TX_RING_SIZE;
679
680 tp->tx_buffers[entry].skb = skb;
681 mapping = pci_map_single(tp->pdev, skb->data,
682 skb->len, PCI_DMA_TODEVICE);
683 tp->tx_buffers[entry].mapping = mapping;
684 tp->tx_ring[entry].buffer1 = cpu_to_le32(mapping);
685
686 if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE/2) {/* Typical path */
687 flag = 0x60000000; /* No interrupt */
688 } else if (tp->cur_tx - tp->dirty_tx == TX_RING_SIZE/2) {
689 flag = 0xe0000000; /* Tx-done intr. */
690 } else if (tp->cur_tx - tp->dirty_tx < TX_RING_SIZE - 2) {
691 flag = 0x60000000; /* No Tx-done intr. */
692 } else { /* Leave room for set_rx_mode() to fill entries. */
693 flag = 0xe0000000; /* Tx-done intr. */
694 netif_stop_queue(dev);
695 }
696 if (entry == TX_RING_SIZE-1)
697 flag = 0xe0000000 | DESC_RING_WRAP;
698
699 tp->tx_ring[entry].length = cpu_to_le32(skb->len | flag);
700 /* if we were using Transmit Automatic Polling, we would need a
701 * wmb() here. */
702 tp->tx_ring[entry].status = cpu_to_le32(DescOwned);
703 wmb();
704
705 tp->cur_tx++;
706
707 /* Trigger an immediate transmit demand. */
708 iowrite32(0, tp->base_addr + CSR1);
709
710 spin_unlock_irqrestore(&tp->lock, flags);
711
712 return NETDEV_TX_OK;
713 }
714
715 static void tulip_clean_tx_ring(struct tulip_private *tp)
716 {
717 unsigned int dirty_tx;
718
719 for (dirty_tx = tp->dirty_tx ; tp->cur_tx - dirty_tx > 0;
720 dirty_tx++) {
721 int entry = dirty_tx % TX_RING_SIZE;
722 int status = le32_to_cpu(tp->tx_ring[entry].status);
723
724 if (status < 0) {
725 tp->dev->stats.tx_errors++; /* It wasn't Txed */
726 tp->tx_ring[entry].status = 0;
727 }
728
729 /* Check for Tx filter setup frames. */
730 if (tp->tx_buffers[entry].skb == NULL) {
731 /* test because dummy frames not mapped */
732 if (tp->tx_buffers[entry].mapping)
733 pci_unmap_single(tp->pdev,
734 tp->tx_buffers[entry].mapping,
735 sizeof(tp->setup_frame),
736 PCI_DMA_TODEVICE);
737 continue;
738 }
739
740 pci_unmap_single(tp->pdev, tp->tx_buffers[entry].mapping,
741 tp->tx_buffers[entry].skb->len,
742 PCI_DMA_TODEVICE);
743
744 /* Free the original skb. */
745 dev_kfree_skb_irq(tp->tx_buffers[entry].skb);
746 tp->tx_buffers[entry].skb = NULL;
747 tp->tx_buffers[entry].mapping = 0;
748 }
749 }
750
751 static void tulip_down (struct net_device *dev)
752 {
753 struct tulip_private *tp = netdev_priv(dev);
754 void __iomem *ioaddr = tp->base_addr;
755 unsigned long flags;
756
757 cancel_work_sync(&tp->media_work);
758
759 #ifdef CONFIG_TULIP_NAPI
760 napi_disable(&tp->napi);
761 #endif
762
763 del_timer_sync (&tp->timer);
764 #ifdef CONFIG_TULIP_NAPI
765 del_timer_sync (&tp->oom_timer);
766 #endif
767 spin_lock_irqsave (&tp->lock, flags);
768
769 /* Disable interrupts by clearing the interrupt mask. */
770 iowrite32 (0x00000000, ioaddr + CSR7);
771
772 /* Stop the Tx and Rx processes. */
773 tulip_stop_rxtx(tp);
774
775 /* prepare receive buffers */
776 tulip_refill_rx(dev);
777
778 /* release any unconsumed transmit buffers */
779 tulip_clean_tx_ring(tp);
780
781 if (ioread32(ioaddr + CSR6) != 0xffffffff)
782 dev->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
783
784 spin_unlock_irqrestore (&tp->lock, flags);
785
786 init_timer(&tp->timer);
787 tp->timer.data = (unsigned long)dev;
788 tp->timer.function = tulip_tbl[tp->chip_id].media_timer;
789
790 dev->if_port = tp->saved_if_port;
791
792 /* Leave the driver in snooze, not sleep, mode. */
793 tulip_set_power_state (tp, 0, 1);
794 }
795
796 static void tulip_free_ring (struct net_device *dev)
797 {
798 struct tulip_private *tp = netdev_priv(dev);
799 int i;
800
801 /* Free all the skbuffs in the Rx queue. */
802 for (i = 0; i < RX_RING_SIZE; i++) {
803 struct sk_buff *skb = tp->rx_buffers[i].skb;
804 dma_addr_t mapping = tp->rx_buffers[i].mapping;
805
806 tp->rx_buffers[i].skb = NULL;
807 tp->rx_buffers[i].mapping = 0;
808
809 tp->rx_ring[i].status = 0; /* Not owned by Tulip chip. */
810 tp->rx_ring[i].length = 0;
811 /* An invalid address. */
812 tp->rx_ring[i].buffer1 = cpu_to_le32(0xBADF00D0);
813 if (skb) {
814 pci_unmap_single(tp->pdev, mapping, PKT_BUF_SZ,
815 PCI_DMA_FROMDEVICE);
816 dev_kfree_skb (skb);
817 }
818 }
819
820 for (i = 0; i < TX_RING_SIZE; i++) {
821 struct sk_buff *skb = tp->tx_buffers[i].skb;
822
823 if (skb != NULL) {
824 pci_unmap_single(tp->pdev, tp->tx_buffers[i].mapping,
825 skb->len, PCI_DMA_TODEVICE);
826 dev_kfree_skb (skb);
827 }
828 tp->tx_buffers[i].skb = NULL;
829 tp->tx_buffers[i].mapping = 0;
830 }
831 }
832
833 static int tulip_close (struct net_device *dev)
834 {
835 struct tulip_private *tp = netdev_priv(dev);
836 void __iomem *ioaddr = tp->base_addr;
837
838 netif_stop_queue (dev);
839
840 tulip_down (dev);
841
842 if (tulip_debug > 1)
843 netdev_dbg(dev, "Shutting down ethercard, status was %02x\n",
844 ioread32 (ioaddr + CSR5));
845
846 free_irq (tp->pdev->irq, dev);
847
848 tulip_free_ring (dev);
849
850 return 0;
851 }
852
853 static struct net_device_stats *tulip_get_stats(struct net_device *dev)
854 {
855 struct tulip_private *tp = netdev_priv(dev);
856 void __iomem *ioaddr = tp->base_addr;
857
858 if (netif_running(dev)) {
859 unsigned long flags;
860
861 spin_lock_irqsave (&tp->lock, flags);
862
863 dev->stats.rx_missed_errors += ioread32(ioaddr + CSR8) & 0xffff;
864
865 spin_unlock_irqrestore(&tp->lock, flags);
866 }
867
868 return &dev->stats;
869 }
870
871
872 static void tulip_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
873 {
874 struct tulip_private *np = netdev_priv(dev);
875 strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
876 strlcpy(info->version, DRV_VERSION, sizeof(info->version));
877 strlcpy(info->bus_info, pci_name(np->pdev), sizeof(info->bus_info));
878 }
879
880
881 static int tulip_ethtool_set_wol(struct net_device *dev,
882 struct ethtool_wolinfo *wolinfo)
883 {
884 struct tulip_private *tp = netdev_priv(dev);
885
886 if (wolinfo->wolopts & (~tp->wolinfo.supported))
887 return -EOPNOTSUPP;
888
889 tp->wolinfo.wolopts = wolinfo->wolopts;
890 device_set_wakeup_enable(&tp->pdev->dev, tp->wolinfo.wolopts);
891 return 0;
892 }
893
894 static void tulip_ethtool_get_wol(struct net_device *dev,
895 struct ethtool_wolinfo *wolinfo)
896 {
897 struct tulip_private *tp = netdev_priv(dev);
898
899 wolinfo->supported = tp->wolinfo.supported;
900 wolinfo->wolopts = tp->wolinfo.wolopts;
901 return;
902 }
903
904
905 static const struct ethtool_ops ops = {
906 .get_drvinfo = tulip_get_drvinfo,
907 .set_wol = tulip_ethtool_set_wol,
908 .get_wol = tulip_ethtool_get_wol,
909 };
910
911 /* Provide ioctl() calls to examine the MII xcvr state. */
912 static int private_ioctl (struct net_device *dev, struct ifreq *rq, int cmd)
913 {
914 struct tulip_private *tp = netdev_priv(dev);
915 void __iomem *ioaddr = tp->base_addr;
916 struct mii_ioctl_data *data = if_mii(rq);
917 const unsigned int phy_idx = 0;
918 int phy = tp->phys[phy_idx] & 0x1f;
919 unsigned int regnum = data->reg_num;
920
921 switch (cmd) {
922 case SIOCGMIIPHY: /* Get address of MII PHY in use. */
923 if (tp->mii_cnt)
924 data->phy_id = phy;
925 else if (tp->flags & HAS_NWAY)
926 data->phy_id = 32;
927 else if (tp->chip_id == COMET)
928 data->phy_id = 1;
929 else
930 return -ENODEV;
931
932 case SIOCGMIIREG: /* Read MII PHY register. */
933 if (data->phy_id == 32 && (tp->flags & HAS_NWAY)) {
934 int csr12 = ioread32 (ioaddr + CSR12);
935 int csr14 = ioread32 (ioaddr + CSR14);
936 switch (regnum) {
937 case 0:
938 if (((csr14<<5) & 0x1000) ||
939 (dev->if_port == 5 && tp->nwayset))
940 data->val_out = 0x1000;
941 else
942 data->val_out = (tulip_media_cap[dev->if_port]&MediaIs100 ? 0x2000 : 0)
943 | (tulip_media_cap[dev->if_port]&MediaIsFD ? 0x0100 : 0);
944 break;
945 case 1:
946 data->val_out =
947 0x1848 +
948 ((csr12&0x7000) == 0x5000 ? 0x20 : 0) +
949 ((csr12&0x06) == 6 ? 0 : 4);
950 data->val_out |= 0x6048;
951 break;
952 case 4:
953 /* Advertised value, bogus 10baseTx-FD value from CSR6. */
954 data->val_out =
955 ((ioread32(ioaddr + CSR6) >> 3) & 0x0040) +
956 ((csr14 >> 1) & 0x20) + 1;
957 data->val_out |= ((csr14 >> 9) & 0x03C0);
958 break;
959 case 5: data->val_out = tp->lpar; break;
960 default: data->val_out = 0; break;
961 }
962 } else {
963 data->val_out = tulip_mdio_read (dev, data->phy_id & 0x1f, regnum);
964 }
965 return 0;
966
967 case SIOCSMIIREG: /* Write MII PHY register. */
968 if (regnum & ~0x1f)
969 return -EINVAL;
970 if (data->phy_id == phy) {
971 u16 value = data->val_in;
972 switch (regnum) {
973 case 0: /* Check for autonegotiation on or reset. */
974 tp->full_duplex_lock = (value & 0x9000) ? 0 : 1;
975 if (tp->full_duplex_lock)
976 tp->full_duplex = (value & 0x0100) ? 1 : 0;
977 break;
978 case 4:
979 tp->advertising[phy_idx] =
980 tp->mii_advertise = data->val_in;
981 break;
982 }
983 }
984 if (data->phy_id == 32 && (tp->flags & HAS_NWAY)) {
985 u16 value = data->val_in;
986 if (regnum == 0) {
987 if ((value & 0x1200) == 0x1200) {
988 if (tp->chip_id == PNIC2) {
989 pnic2_start_nway (dev);
990 } else {
991 t21142_start_nway (dev);
992 }
993 }
994 } else if (regnum == 4)
995 tp->sym_advertise = value;
996 } else {
997 tulip_mdio_write (dev, data->phy_id & 0x1f, regnum, data->val_in);
998 }
999 return 0;
1000 default:
1001 return -EOPNOTSUPP;
1002 }
1003
1004 return -EOPNOTSUPP;
1005 }
1006
1007
1008 /* Set or clear the multicast filter for this adaptor.
1009 Note that we only use exclusion around actually queueing the
1010 new frame, not around filling tp->setup_frame. This is non-deterministic
1011 when re-entered but still correct. */
1012
1013 static void build_setup_frame_hash(u16 *setup_frm, struct net_device *dev)
1014 {
1015 struct tulip_private *tp = netdev_priv(dev);
1016 u16 hash_table[32];
1017 struct netdev_hw_addr *ha;
1018 int i;
1019 u16 *eaddrs;
1020
1021 memset(hash_table, 0, sizeof(hash_table));
1022 __set_bit_le(255, hash_table); /* Broadcast entry */
1023 /* This should work on big-endian machines as well. */
1024 netdev_for_each_mc_addr(ha, dev) {
1025 int index = ether_crc_le(ETH_ALEN, ha->addr) & 0x1ff;
1026
1027 __set_bit_le(index, hash_table);
1028 }
1029 for (i = 0; i < 32; i++) {
1030 *setup_frm++ = hash_table[i];
1031 *setup_frm++ = hash_table[i];
1032 }
1033 setup_frm = &tp->setup_frame[13*6];
1034
1035 /* Fill the final entry with our physical address. */
1036 eaddrs = (u16 *)dev->dev_addr;
1037 *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0];
1038 *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1];
1039 *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2];
1040 }
1041
1042 static void build_setup_frame_perfect(u16 *setup_frm, struct net_device *dev)
1043 {
1044 struct tulip_private *tp = netdev_priv(dev);
1045 struct netdev_hw_addr *ha;
1046 u16 *eaddrs;
1047
1048 /* We have <= 14 addresses so we can use the wonderful
1049 16 address perfect filtering of the Tulip. */
1050 netdev_for_each_mc_addr(ha, dev) {
1051 eaddrs = (u16 *) ha->addr;
1052 *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
1053 *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
1054 *setup_frm++ = *eaddrs; *setup_frm++ = *eaddrs++;
1055 }
1056 /* Fill the unused entries with the broadcast address. */
1057 memset(setup_frm, 0xff, (15 - netdev_mc_count(dev)) * 12);
1058 setup_frm = &tp->setup_frame[15*6];
1059
1060 /* Fill the final entry with our physical address. */
1061 eaddrs = (u16 *)dev->dev_addr;
1062 *setup_frm++ = eaddrs[0]; *setup_frm++ = eaddrs[0];
1063 *setup_frm++ = eaddrs[1]; *setup_frm++ = eaddrs[1];
1064 *setup_frm++ = eaddrs[2]; *setup_frm++ = eaddrs[2];
1065 }
1066
1067
1068 static void set_rx_mode(struct net_device *dev)
1069 {
1070 struct tulip_private *tp = netdev_priv(dev);
1071 void __iomem *ioaddr = tp->base_addr;
1072 int csr6;
1073
1074 csr6 = ioread32(ioaddr + CSR6) & ~0x00D5;
1075
1076 tp->csr6 &= ~0x00D5;
1077 if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
1078 tp->csr6 |= AcceptAllMulticast | AcceptAllPhys;
1079 csr6 |= AcceptAllMulticast | AcceptAllPhys;
1080 } else if ((netdev_mc_count(dev) > 1000) ||
1081 (dev->flags & IFF_ALLMULTI)) {
1082 /* Too many to filter well -- accept all multicasts. */
1083 tp->csr6 |= AcceptAllMulticast;
1084 csr6 |= AcceptAllMulticast;
1085 } else if (tp->flags & MC_HASH_ONLY) {
1086 /* Some work-alikes have only a 64-entry hash filter table. */
1087 /* Should verify correctness on big-endian/__powerpc__ */
1088 struct netdev_hw_addr *ha;
1089 if (netdev_mc_count(dev) > 64) {
1090 /* Arbitrary non-effective limit. */
1091 tp->csr6 |= AcceptAllMulticast;
1092 csr6 |= AcceptAllMulticast;
1093 } else {
1094 u32 mc_filter[2] = {0, 0}; /* Multicast hash filter */
1095 int filterbit;
1096 netdev_for_each_mc_addr(ha, dev) {
1097 if (tp->flags & COMET_MAC_ADDR)
1098 filterbit = ether_crc_le(ETH_ALEN,
1099 ha->addr);
1100 else
1101 filterbit = ether_crc(ETH_ALEN,
1102 ha->addr) >> 26;
1103 filterbit &= 0x3f;
1104 mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
1105 if (tulip_debug > 2)
1106 dev_info(&dev->dev,
1107 "Added filter for %pM %08x bit %d\n",
1108 ha->addr,
1109 ether_crc(ETH_ALEN, ha->addr),
1110 filterbit);
1111 }
1112 if (mc_filter[0] == tp->mc_filter[0] &&
1113 mc_filter[1] == tp->mc_filter[1])
1114 ; /* No change. */
1115 else if (tp->flags & IS_ASIX) {
1116 iowrite32(2, ioaddr + CSR13);
1117 iowrite32(mc_filter[0], ioaddr + CSR14);
1118 iowrite32(3, ioaddr + CSR13);
1119 iowrite32(mc_filter[1], ioaddr + CSR14);
1120 } else if (tp->flags & COMET_MAC_ADDR) {
1121 iowrite32(mc_filter[0], ioaddr + CSR27);
1122 iowrite32(mc_filter[1], ioaddr + CSR28);
1123 }
1124 tp->mc_filter[0] = mc_filter[0];
1125 tp->mc_filter[1] = mc_filter[1];
1126 }
1127 } else {
1128 unsigned long flags;
1129 u32 tx_flags = 0x08000000 | 192;
1130
1131 /* Note that only the low-address shortword of setup_frame is valid!
1132 The values are doubled for big-endian architectures. */
1133 if (netdev_mc_count(dev) > 14) {
1134 /* Must use a multicast hash table. */
1135 build_setup_frame_hash(tp->setup_frame, dev);
1136 tx_flags = 0x08400000 | 192;
1137 } else {
1138 build_setup_frame_perfect(tp->setup_frame, dev);
1139 }
1140
1141 spin_lock_irqsave(&tp->lock, flags);
1142
1143 if (tp->cur_tx - tp->dirty_tx > TX_RING_SIZE - 2) {
1144 /* Same setup recently queued, we need not add it. */
1145 } else {
1146 unsigned int entry;
1147 int dummy = -1;
1148
1149 /* Now add this frame to the Tx list. */
1150
1151 entry = tp->cur_tx++ % TX_RING_SIZE;
1152
1153 if (entry != 0) {
1154 /* Avoid a chip errata by prefixing a dummy entry. */
1155 tp->tx_buffers[entry].skb = NULL;
1156 tp->tx_buffers[entry].mapping = 0;
1157 tp->tx_ring[entry].length =
1158 (entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0;
1159 tp->tx_ring[entry].buffer1 = 0;
1160 /* Must set DescOwned later to avoid race with chip */
1161 dummy = entry;
1162 entry = tp->cur_tx++ % TX_RING_SIZE;
1163
1164 }
1165
1166 tp->tx_buffers[entry].skb = NULL;
1167 tp->tx_buffers[entry].mapping =
1168 pci_map_single(tp->pdev, tp->setup_frame,
1169 sizeof(tp->setup_frame),
1170 PCI_DMA_TODEVICE);
1171 /* Put the setup frame on the Tx list. */
1172 if (entry == TX_RING_SIZE-1)
1173 tx_flags |= DESC_RING_WRAP; /* Wrap ring. */
1174 tp->tx_ring[entry].length = cpu_to_le32(tx_flags);
1175 tp->tx_ring[entry].buffer1 =
1176 cpu_to_le32(tp->tx_buffers[entry].mapping);
1177 tp->tx_ring[entry].status = cpu_to_le32(DescOwned);
1178 if (dummy >= 0)
1179 tp->tx_ring[dummy].status = cpu_to_le32(DescOwned);
1180 if (tp->cur_tx - tp->dirty_tx >= TX_RING_SIZE - 2)
1181 netif_stop_queue(dev);
1182
1183 /* Trigger an immediate transmit demand. */
1184 iowrite32(0, ioaddr + CSR1);
1185 }
1186
1187 spin_unlock_irqrestore(&tp->lock, flags);
1188 }
1189
1190 iowrite32(csr6, ioaddr + CSR6);
1191 }
1192
1193 #ifdef CONFIG_TULIP_MWI
1194 static void tulip_mwi_config(struct pci_dev *pdev, struct net_device *dev)
1195 {
1196 struct tulip_private *tp = netdev_priv(dev);
1197 u8 cache;
1198 u16 pci_command;
1199 u32 csr0;
1200
1201 if (tulip_debug > 3)
1202 netdev_dbg(dev, "tulip_mwi_config()\n");
1203
1204 tp->csr0 = csr0 = 0;
1205
1206 /* if we have any cache line size at all, we can do MRM and MWI */
1207 csr0 |= MRM | MWI;
1208
1209 /* Enable MWI in the standard PCI command bit.
1210 * Check for the case where MWI is desired but not available
1211 */
1212 pci_try_set_mwi(pdev);
1213
1214 /* read result from hardware (in case bit refused to enable) */
1215 pci_read_config_word(pdev, PCI_COMMAND, &pci_command);
1216 if ((csr0 & MWI) && (!(pci_command & PCI_COMMAND_INVALIDATE)))
1217 csr0 &= ~MWI;
1218
1219 /* if cache line size hardwired to zero, no MWI */
1220 pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &cache);
1221 if ((csr0 & MWI) && (cache == 0)) {
1222 csr0 &= ~MWI;
1223 pci_clear_mwi(pdev);
1224 }
1225
1226 /* assign per-cacheline-size cache alignment and
1227 * burst length values
1228 */
1229 switch (cache) {
1230 case 8:
1231 csr0 |= MRL | (1 << CALShift) | (16 << BurstLenShift);
1232 break;
1233 case 16:
1234 csr0 |= MRL | (2 << CALShift) | (16 << BurstLenShift);
1235 break;
1236 case 32:
1237 csr0 |= MRL | (3 << CALShift) | (32 << BurstLenShift);
1238 break;
1239 default:
1240 cache = 0;
1241 break;
1242 }
1243
1244 /* if we have a good cache line size, we by now have a good
1245 * csr0, so save it and exit
1246 */
1247 if (cache)
1248 goto out;
1249
1250 /* we don't have a good csr0 or cache line size, disable MWI */
1251 if (csr0 & MWI) {
1252 pci_clear_mwi(pdev);
1253 csr0 &= ~MWI;
1254 }
1255
1256 /* sane defaults for burst length and cache alignment
1257 * originally from de4x5 driver
1258 */
1259 csr0 |= (8 << BurstLenShift) | (1 << CALShift);
1260
1261 out:
1262 tp->csr0 = csr0;
1263 if (tulip_debug > 2)
1264 netdev_dbg(dev, "MWI config cacheline=%d, csr0=%08x\n",
1265 cache, csr0);
1266 }
1267 #endif
1268
1269 /*
1270 * Chips that have the MRM/reserved bit quirk and the burst quirk. That
1271 * is the DM910X and the on chip ULi devices
1272 */
1273
1274 static int tulip_uli_dm_quirk(struct pci_dev *pdev)
1275 {
1276 if (pdev->vendor == 0x1282 && pdev->device == 0x9102)
1277 return 1;
1278 return 0;
1279 }
1280
1281 static const struct net_device_ops tulip_netdev_ops = {
1282 .ndo_open = tulip_open,
1283 .ndo_start_xmit = tulip_start_xmit,
1284 .ndo_tx_timeout = tulip_tx_timeout,
1285 .ndo_stop = tulip_close,
1286 .ndo_get_stats = tulip_get_stats,
1287 .ndo_do_ioctl = private_ioctl,
1288 .ndo_set_rx_mode = set_rx_mode,
1289 .ndo_change_mtu = eth_change_mtu,
1290 .ndo_set_mac_address = eth_mac_addr,
1291 .ndo_validate_addr = eth_validate_addr,
1292 #ifdef CONFIG_NET_POLL_CONTROLLER
1293 .ndo_poll_controller = poll_tulip,
1294 #endif
1295 };
1296
1297 const struct pci_device_id early_486_chipsets[] = {
1298 { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) },
1299 { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) },
1300 { },
1301 };
1302
1303 static int tulip_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
1304 {
1305 struct tulip_private *tp;
1306 /* See note below on the multiport cards. */
1307 static unsigned char last_phys_addr[ETH_ALEN] = {
1308 0x00, 'L', 'i', 'n', 'u', 'x'
1309 };
1310 static int last_irq;
1311 static int multiport_cnt; /* For four-port boards w/one EEPROM */
1312 int i, irq;
1313 unsigned short sum;
1314 unsigned char *ee_data;
1315 struct net_device *dev;
1316 void __iomem *ioaddr;
1317 static int board_idx = -1;
1318 int chip_idx = ent->driver_data;
1319 const char *chip_name = tulip_tbl[chip_idx].chip_name;
1320 unsigned int eeprom_missing = 0;
1321 unsigned int force_csr0 = 0;
1322
1323 #ifndef MODULE
1324 if (tulip_debug > 0)
1325 printk_once(KERN_INFO "%s", version);
1326 #endif
1327
1328 board_idx++;
1329
1330 /*
1331 * Lan media wire a tulip chip to a wan interface. Needs a very
1332 * different driver (lmc driver)
1333 */
1334
1335 if (pdev->subsystem_vendor == PCI_VENDOR_ID_LMC) {
1336 pr_err("skipping LMC card\n");
1337 return -ENODEV;
1338 } else if (pdev->subsystem_vendor == PCI_VENDOR_ID_SBE &&
1339 (pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_T3E3 ||
1340 pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P0 ||
1341 pdev->subsystem_device == PCI_SUBDEVICE_ID_SBE_2T3E3_P1)) {
1342 pr_err("skipping SBE T3E3 port\n");
1343 return -ENODEV;
1344 }
1345
1346 /*
1347 * DM910x chips should be handled by the dmfe driver, except
1348 * on-board chips on SPARC systems. Also, early DM9100s need
1349 * software CRC which only the dmfe driver supports.
1350 */
1351
1352 #ifdef CONFIG_TULIP_DM910X
1353 if (chip_idx == DM910X) {
1354 struct device_node *dp;
1355
1356 if (pdev->vendor == 0x1282 && pdev->device == 0x9100 &&
1357 pdev->revision < 0x30) {
1358 pr_info("skipping early DM9100 with Crc bug (use dmfe)\n");
1359 return -ENODEV;
1360 }
1361
1362 dp = pci_device_to_OF_node(pdev);
1363 if (!(dp && of_get_property(dp, "local-mac-address", NULL))) {
1364 pr_info("skipping DM910x expansion card (use dmfe)\n");
1365 return -ENODEV;
1366 }
1367 }
1368 #endif
1369
1370 /*
1371 * Looks for early PCI chipsets where people report hangs
1372 * without the workarounds being on.
1373 */
1374
1375 /* 1. Intel Saturn. Switch to 8 long words burst, 8 long word cache
1376 aligned. Aries might need this too. The Saturn errata are not
1377 pretty reading but thankfully it's an old 486 chipset.
1378
1379 2. The dreaded SiS496 486 chipset. Same workaround as Intel
1380 Saturn.
1381 */
1382
1383 if (pci_dev_present(early_486_chipsets)) {
1384 csr0 = MRL | MRM | (8 << BurstLenShift) | (1 << CALShift);
1385 force_csr0 = 1;
1386 }
1387
1388 /* bugfix: the ASIX must have a burst limit or horrible things happen. */
1389 if (chip_idx == AX88140) {
1390 if ((csr0 & 0x3f00) == 0)
1391 csr0 |= 0x2000;
1392 }
1393
1394 /* PNIC doesn't have MWI/MRL/MRM... */
1395 if (chip_idx == LC82C168)
1396 csr0 &= ~0xfff10000; /* zero reserved bits 31:20, 16 */
1397
1398 /* DM9102A has troubles with MRM & clear reserved bits 24:22, 20, 16, 7:1 */
1399 if (tulip_uli_dm_quirk(pdev)) {
1400 csr0 &= ~0x01f100ff;
1401 #if defined(CONFIG_SPARC)
1402 csr0 = (csr0 & ~0xff00) | 0xe000;
1403 #endif
1404 }
1405 /*
1406 * And back to business
1407 */
1408
1409 i = pci_enable_device(pdev);
1410 if (i) {
1411 pr_err("Cannot enable tulip board #%d, aborting\n", board_idx);
1412 return i;
1413 }
1414
1415 irq = pdev->irq;
1416
1417 /* alloc_etherdev ensures aligned and zeroed private structures */
1418 dev = alloc_etherdev (sizeof (*tp));
1419 if (!dev)
1420 return -ENOMEM;
1421
1422 SET_NETDEV_DEV(dev, &pdev->dev);
1423 if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) {
1424 pr_err("%s: I/O region (0x%llx@0x%llx) too small, aborting\n",
1425 pci_name(pdev),
1426 (unsigned long long)pci_resource_len (pdev, 0),
1427 (unsigned long long)pci_resource_start (pdev, 0));
1428 goto err_out_free_netdev;
1429 }
1430
1431 /* grab all resources from both PIO and MMIO regions, as we
1432 * don't want anyone else messing around with our hardware */
1433 if (pci_request_regions (pdev, DRV_NAME))
1434 goto err_out_free_netdev;
1435
1436 ioaddr = pci_iomap(pdev, TULIP_BAR, tulip_tbl[chip_idx].io_size);
1437
1438 if (!ioaddr)
1439 goto err_out_free_res;
1440
1441 /*
1442 * initialize private data structure 'tp'
1443 * it is zeroed and aligned in alloc_etherdev
1444 */
1445 tp = netdev_priv(dev);
1446 tp->dev = dev;
1447
1448 tp->rx_ring = pci_alloc_consistent(pdev,
1449 sizeof(struct tulip_rx_desc) * RX_RING_SIZE +
1450 sizeof(struct tulip_tx_desc) * TX_RING_SIZE,
1451 &tp->rx_ring_dma);
1452 if (!tp->rx_ring)
1453 goto err_out_mtable;
1454 tp->tx_ring = (struct tulip_tx_desc *)(tp->rx_ring + RX_RING_SIZE);
1455 tp->tx_ring_dma = tp->rx_ring_dma + sizeof(struct tulip_rx_desc) * RX_RING_SIZE;
1456
1457 tp->chip_id = chip_idx;
1458 tp->flags = tulip_tbl[chip_idx].flags;
1459
1460 tp->wolinfo.supported = 0;
1461 tp->wolinfo.wolopts = 0;
1462 /* COMET: Enable power management only for AN983B */
1463 if (chip_idx == COMET ) {
1464 u32 sig;
1465 pci_read_config_dword (pdev, 0x80, &sig);
1466 if (sig == 0x09811317) {
1467 tp->flags |= COMET_PM;
1468 tp->wolinfo.supported = WAKE_PHY | WAKE_MAGIC;
1469 pr_info("%s: Enabled WOL support for AN983B\n",
1470 __func__);
1471 }
1472 }
1473 tp->pdev = pdev;
1474 tp->base_addr = ioaddr;
1475 tp->revision = pdev->revision;
1476 tp->csr0 = csr0;
1477 spin_lock_init(&tp->lock);
1478 spin_lock_init(&tp->mii_lock);
1479 init_timer(&tp->timer);
1480 tp->timer.data = (unsigned long)dev;
1481 tp->timer.function = tulip_tbl[tp->chip_id].media_timer;
1482
1483 INIT_WORK(&tp->media_work, tulip_tbl[tp->chip_id].media_task);
1484
1485 #ifdef CONFIG_TULIP_MWI
1486 if (!force_csr0 && (tp->flags & HAS_PCI_MWI))
1487 tulip_mwi_config (pdev, dev);
1488 #endif
1489
1490 /* Stop the chip's Tx and Rx processes. */
1491 tulip_stop_rxtx(tp);
1492
1493 pci_set_master(pdev);
1494
1495 #ifdef CONFIG_GSC
1496 if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP) {
1497 switch (pdev->subsystem_device) {
1498 default:
1499 break;
1500 case 0x1061:
1501 case 0x1062:
1502 case 0x1063:
1503 case 0x1098:
1504 case 0x1099:
1505 case 0x10EE:
1506 tp->flags |= HAS_SWAPPED_SEEPROM | NEEDS_FAKE_MEDIA_TABLE;
1507 chip_name = "GSC DS21140 Tulip";
1508 }
1509 }
1510 #endif
1511
1512 /* Clear the missed-packet counter. */
1513 ioread32(ioaddr + CSR8);
1514
1515 /* The station address ROM is read byte serially. The register must
1516 be polled, waiting for the value to be read bit serially from the
1517 EEPROM.
1518 */
1519 ee_data = tp->eeprom;
1520 memset(ee_data, 0, sizeof(tp->eeprom));
1521 sum = 0;
1522 if (chip_idx == LC82C168) {
1523 for (i = 0; i < 3; i++) {
1524 int value, boguscnt = 100000;
1525 iowrite32(0x600 | i, ioaddr + 0x98);
1526 do {
1527 value = ioread32(ioaddr + CSR9);
1528 } while (value < 0 && --boguscnt > 0);
1529 put_unaligned_le16(value, ((__le16 *)dev->dev_addr) + i);
1530 sum += value & 0xffff;
1531 }
1532 } else if (chip_idx == COMET) {
1533 /* No need to read the EEPROM. */
1534 put_unaligned_le32(ioread32(ioaddr + 0xA4), dev->dev_addr);
1535 put_unaligned_le16(ioread32(ioaddr + 0xA8), dev->dev_addr + 4);
1536 for (i = 0; i < 6; i ++)
1537 sum += dev->dev_addr[i];
1538 } else {
1539 /* A serial EEPROM interface, we read now and sort it out later. */
1540 int sa_offset = 0;
1541 int ee_addr_size = tulip_read_eeprom(dev, 0xff, 8) & 0x40000 ? 8 : 6;
1542 int ee_max_addr = ((1 << ee_addr_size) - 1) * sizeof(u16);
1543
1544 if (ee_max_addr > sizeof(tp->eeprom))
1545 ee_max_addr = sizeof(tp->eeprom);
1546
1547 for (i = 0; i < ee_max_addr ; i += sizeof(u16)) {
1548 u16 data = tulip_read_eeprom(dev, i/2, ee_addr_size);
1549 ee_data[i] = data & 0xff;
1550 ee_data[i + 1] = data >> 8;
1551 }
1552
1553 /* DEC now has a specification (see Notes) but early board makers
1554 just put the address in the first EEPROM locations. */
1555 /* This does memcmp(ee_data, ee_data+16, 8) */
1556 for (i = 0; i < 8; i ++)
1557 if (ee_data[i] != ee_data[16+i])
1558 sa_offset = 20;
1559 if (chip_idx == CONEXANT) {
1560 /* Check that the tuple type and length is correct. */
1561 if (ee_data[0x198] == 0x04 && ee_data[0x199] == 6)
1562 sa_offset = 0x19A;
1563 } else if (ee_data[0] == 0xff && ee_data[1] == 0xff &&
1564 ee_data[2] == 0) {
1565 sa_offset = 2; /* Grrr, damn Matrox boards. */
1566 multiport_cnt = 4;
1567 }
1568 #ifdef CONFIG_MIPS_COBALT
1569 if ((pdev->bus->number == 0) &&
1570 ((PCI_SLOT(pdev->devfn) == 7) ||
1571 (PCI_SLOT(pdev->devfn) == 12))) {
1572 /* Cobalt MAC address in first EEPROM locations. */
1573 sa_offset = 0;
1574 /* Ensure our media table fixup get's applied */
1575 memcpy(ee_data + 16, ee_data, 8);
1576 }
1577 #endif
1578 #ifdef CONFIG_GSC
1579 /* Check to see if we have a broken srom */
1580 if (ee_data[0] == 0x61 && ee_data[1] == 0x10) {
1581 /* pci_vendor_id and subsystem_id are swapped */
1582 ee_data[0] = ee_data[2];
1583 ee_data[1] = ee_data[3];
1584 ee_data[2] = 0x61;
1585 ee_data[3] = 0x10;
1586
1587 /* HSC-PCI boards need to be byte-swaped and shifted
1588 * up 1 word. This shift needs to happen at the end
1589 * of the MAC first because of the 2 byte overlap.
1590 */
1591 for (i = 4; i >= 0; i -= 2) {
1592 ee_data[17 + i + 3] = ee_data[17 + i];
1593 ee_data[16 + i + 5] = ee_data[16 + i];
1594 }
1595 }
1596 #endif
1597
1598 for (i = 0; i < 6; i ++) {
1599 dev->dev_addr[i] = ee_data[i + sa_offset];
1600 sum += ee_data[i + sa_offset];
1601 }
1602 }
1603 /* Lite-On boards have the address byte-swapped. */
1604 if ((dev->dev_addr[0] == 0xA0 ||
1605 dev->dev_addr[0] == 0xC0 ||
1606 dev->dev_addr[0] == 0x02) &&
1607 dev->dev_addr[1] == 0x00)
1608 for (i = 0; i < 6; i+=2) {
1609 char tmp = dev->dev_addr[i];
1610 dev->dev_addr[i] = dev->dev_addr[i+1];
1611 dev->dev_addr[i+1] = tmp;
1612 }
1613 /* On the Zynx 315 Etherarray and other multiport boards only the
1614 first Tulip has an EEPROM.
1615 On Sparc systems the mac address is held in the OBP property
1616 "local-mac-address".
1617 The addresses of the subsequent ports are derived from the first.
1618 Many PCI BIOSes also incorrectly report the IRQ line, so we correct
1619 that here as well. */
1620 if (sum == 0 || sum == 6*0xff) {
1621 #if defined(CONFIG_SPARC)
1622 struct device_node *dp = pci_device_to_OF_node(pdev);
1623 const unsigned char *addr;
1624 int len;
1625 #endif
1626 eeprom_missing = 1;
1627 for (i = 0; i < 5; i++)
1628 dev->dev_addr[i] = last_phys_addr[i];
1629 dev->dev_addr[i] = last_phys_addr[i] + 1;
1630 #if defined(CONFIG_SPARC)
1631 addr = of_get_property(dp, "local-mac-address", &len);
1632 if (addr && len == ETH_ALEN)
1633 memcpy(dev->dev_addr, addr, ETH_ALEN);
1634 #endif
1635 #if defined(__i386__) || defined(__x86_64__) /* Patch up x86 BIOS bug. */
1636 if (last_irq)
1637 irq = last_irq;
1638 #endif
1639 }
1640
1641 for (i = 0; i < 6; i++)
1642 last_phys_addr[i] = dev->dev_addr[i];
1643 last_irq = irq;
1644
1645 /* The lower four bits are the media type. */
1646 if (board_idx >= 0 && board_idx < MAX_UNITS) {
1647 if (options[board_idx] & MEDIA_MASK)
1648 tp->default_port = options[board_idx] & MEDIA_MASK;
1649 if ((options[board_idx] & FullDuplex) || full_duplex[board_idx] > 0)
1650 tp->full_duplex = 1;
1651 if (mtu[board_idx] > 0)
1652 dev->mtu = mtu[board_idx];
1653 }
1654 if (dev->mem_start & MEDIA_MASK)
1655 tp->default_port = dev->mem_start & MEDIA_MASK;
1656 if (tp->default_port) {
1657 pr_info(DRV_NAME "%d: Transceiver selection forced to %s\n",
1658 board_idx, medianame[tp->default_port & MEDIA_MASK]);
1659 tp->medialock = 1;
1660 if (tulip_media_cap[tp->default_port] & MediaAlwaysFD)
1661 tp->full_duplex = 1;
1662 }
1663 if (tp->full_duplex)
1664 tp->full_duplex_lock = 1;
1665
1666 if (tulip_media_cap[tp->default_port] & MediaIsMII) {
1667 static const u16 media2advert[] = {
1668 0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200
1669 };
1670 tp->mii_advertise = media2advert[tp->default_port - 9];
1671 tp->mii_advertise |= (tp->flags & HAS_8023X); /* Matching bits! */
1672 }
1673
1674 if (tp->flags & HAS_MEDIA_TABLE) {
1675 sprintf(dev->name, DRV_NAME "%d", board_idx); /* hack */
1676 tulip_parse_eeprom(dev);
1677 strcpy(dev->name, "eth%d"); /* un-hack */
1678 }
1679
1680 if ((tp->flags & ALWAYS_CHECK_MII) ||
1681 (tp->mtable && tp->mtable->has_mii) ||
1682 ( ! tp->mtable && (tp->flags & HAS_MII))) {
1683 if (tp->mtable && tp->mtable->has_mii) {
1684 for (i = 0; i < tp->mtable->leafcount; i++)
1685 if (tp->mtable->mleaf[i].media == 11) {
1686 tp->cur_index = i;
1687 tp->saved_if_port = dev->if_port;
1688 tulip_select_media(dev, 2);
1689 dev->if_port = tp->saved_if_port;
1690 break;
1691 }
1692 }
1693
1694 /* Find the connected MII xcvrs.
1695 Doing this in open() would allow detecting external xcvrs
1696 later, but takes much time. */
1697 tulip_find_mii (dev, board_idx);
1698 }
1699
1700 /* The Tulip-specific entries in the device structure. */
1701 dev->netdev_ops = &tulip_netdev_ops;
1702 dev->watchdog_timeo = TX_TIMEOUT;
1703 #ifdef CONFIG_TULIP_NAPI
1704 netif_napi_add(dev, &tp->napi, tulip_poll, 16);
1705 #endif
1706 dev->ethtool_ops = &ops;
1707
1708 if (register_netdev(dev))
1709 goto err_out_free_ring;
1710
1711 pci_set_drvdata(pdev, dev);
1712
1713 dev_info(&dev->dev,
1714 #ifdef CONFIG_TULIP_MMIO
1715 "%s rev %d at MMIO %#llx,%s %pM, IRQ %d\n",
1716 #else
1717 "%s rev %d at Port %#llx,%s %pM, IRQ %d\n",
1718 #endif
1719 chip_name, pdev->revision,
1720 (unsigned long long)pci_resource_start(pdev, TULIP_BAR),
1721 eeprom_missing ? " EEPROM not present," : "",
1722 dev->dev_addr, irq);
1723
1724 if (tp->chip_id == PNIC2)
1725 tp->link_change = pnic2_lnk_change;
1726 else if (tp->flags & HAS_NWAY)
1727 tp->link_change = t21142_lnk_change;
1728 else if (tp->flags & HAS_PNICNWAY)
1729 tp->link_change = pnic_lnk_change;
1730
1731 /* Reset the xcvr interface and turn on heartbeat. */
1732 switch (chip_idx) {
1733 case DC21140:
1734 case DM910X:
1735 default:
1736 if (tp->mtable)
1737 iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12);
1738 break;
1739 case DC21142:
1740 if (tp->mii_cnt || tulip_media_cap[dev->if_port] & MediaIsMII) {
1741 iowrite32(csr6_mask_defstate, ioaddr + CSR6);
1742 iowrite32(0x0000, ioaddr + CSR13);
1743 iowrite32(0x0000, ioaddr + CSR14);
1744 iowrite32(csr6_mask_hdcap, ioaddr + CSR6);
1745 } else
1746 t21142_start_nway(dev);
1747 break;
1748 case PNIC2:
1749 /* just do a reset for sanity sake */
1750 iowrite32(0x0000, ioaddr + CSR13);
1751 iowrite32(0x0000, ioaddr + CSR14);
1752 break;
1753 case LC82C168:
1754 if ( ! tp->mii_cnt) {
1755 tp->nway = 1;
1756 tp->nwayset = 0;
1757 iowrite32(csr6_ttm | csr6_ca, ioaddr + CSR6);
1758 iowrite32(0x30, ioaddr + CSR12);
1759 iowrite32(0x0001F078, ioaddr + CSR6);
1760 iowrite32(0x0201F078, ioaddr + CSR6); /* Turn on autonegotiation. */
1761 }
1762 break;
1763 case MX98713:
1764 case COMPEX9881:
1765 iowrite32(0x00000000, ioaddr + CSR6);
1766 iowrite32(0x000711C0, ioaddr + CSR14); /* Turn on NWay. */
1767 iowrite32(0x00000001, ioaddr + CSR13);
1768 break;
1769 case MX98715:
1770 case MX98725:
1771 iowrite32(0x01a80000, ioaddr + CSR6);
1772 iowrite32(0xFFFFFFFF, ioaddr + CSR14);
1773 iowrite32(0x00001000, ioaddr + CSR12);
1774 break;
1775 case COMET:
1776 /* No initialization necessary. */
1777 break;
1778 }
1779
1780 /* put the chip in snooze mode until opened */
1781 tulip_set_power_state (tp, 0, 1);
1782
1783 return 0;
1784
1785 err_out_free_ring:
1786 pci_free_consistent (pdev,
1787 sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
1788 sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
1789 tp->rx_ring, tp->rx_ring_dma);
1790
1791 err_out_mtable:
1792 kfree (tp->mtable);
1793 pci_iounmap(pdev, ioaddr);
1794
1795 err_out_free_res:
1796 pci_release_regions (pdev);
1797
1798 err_out_free_netdev:
1799 free_netdev (dev);
1800 return -ENODEV;
1801 }
1802
1803
1804 /* set the registers according to the given wolopts */
1805 static void tulip_set_wolopts (struct pci_dev *pdev, u32 wolopts)
1806 {
1807 struct net_device *dev = pci_get_drvdata(pdev);
1808 struct tulip_private *tp = netdev_priv(dev);
1809 void __iomem *ioaddr = tp->base_addr;
1810
1811 if (tp->flags & COMET_PM) {
1812
1813 unsigned int tmp;
1814
1815 tmp = ioread32(ioaddr + CSR18);
1816 tmp &= ~(comet_csr18_pmes_sticky | comet_csr18_apm_mode | comet_csr18_d3a);
1817 tmp |= comet_csr18_pm_mode;
1818 iowrite32(tmp, ioaddr + CSR18);
1819
1820 /* Set the Wake-up Control/Status Register to the given WOL options*/
1821 tmp = ioread32(ioaddr + CSR13);
1822 tmp &= ~(comet_csr13_linkoffe | comet_csr13_linkone | comet_csr13_wfre | comet_csr13_lsce | comet_csr13_mpre);
1823 if (wolopts & WAKE_MAGIC)
1824 tmp |= comet_csr13_mpre;
1825 if (wolopts & WAKE_PHY)
1826 tmp |= comet_csr13_linkoffe | comet_csr13_linkone | comet_csr13_lsce;
1827 /* Clear the event flags */
1828 tmp |= comet_csr13_wfr | comet_csr13_mpr | comet_csr13_lsc;
1829 iowrite32(tmp, ioaddr + CSR13);
1830 }
1831 }
1832
1833 #ifdef CONFIG_PM
1834
1835
1836 static int tulip_suspend (struct pci_dev *pdev, pm_message_t state)
1837 {
1838 pci_power_t pstate;
1839 struct net_device *dev = pci_get_drvdata(pdev);
1840 struct tulip_private *tp = netdev_priv(dev);
1841
1842 if (!dev)
1843 return -EINVAL;
1844
1845 if (!netif_running(dev))
1846 goto save_state;
1847
1848 tulip_down(dev);
1849
1850 netif_device_detach(dev);
1851 /* FIXME: it needlessly adds an error path. */
1852 free_irq(tp->pdev->irq, dev);
1853
1854 save_state:
1855 pci_save_state(pdev);
1856 pci_disable_device(pdev);
1857 pstate = pci_choose_state(pdev, state);
1858 if (state.event == PM_EVENT_SUSPEND && pstate != PCI_D0) {
1859 int rc;
1860
1861 tulip_set_wolopts(pdev, tp->wolinfo.wolopts);
1862 rc = pci_enable_wake(pdev, pstate, tp->wolinfo.wolopts);
1863 if (rc)
1864 pr_err("pci_enable_wake failed (%d)\n", rc);
1865 }
1866 pci_set_power_state(pdev, pstate);
1867
1868 return 0;
1869 }
1870
1871
1872 static int tulip_resume(struct pci_dev *pdev)
1873 {
1874 struct net_device *dev = pci_get_drvdata(pdev);
1875 struct tulip_private *tp = netdev_priv(dev);
1876 void __iomem *ioaddr = tp->base_addr;
1877 int retval;
1878 unsigned int tmp;
1879
1880 if (!dev)
1881 return -EINVAL;
1882
1883 pci_set_power_state(pdev, PCI_D0);
1884 pci_restore_state(pdev);
1885
1886 if (!netif_running(dev))
1887 return 0;
1888
1889 if ((retval = pci_enable_device(pdev))) {
1890 pr_err("pci_enable_device failed in resume\n");
1891 return retval;
1892 }
1893
1894 retval = request_irq(pdev->irq, tulip_interrupt, IRQF_SHARED,
1895 dev->name, dev);
1896 if (retval) {
1897 pr_err("request_irq failed in resume\n");
1898 return retval;
1899 }
1900
1901 if (tp->flags & COMET_PM) {
1902 pci_enable_wake(pdev, PCI_D3hot, 0);
1903 pci_enable_wake(pdev, PCI_D3cold, 0);
1904
1905 /* Clear the PMES flag */
1906 tmp = ioread32(ioaddr + CSR20);
1907 tmp |= comet_csr20_pmes;
1908 iowrite32(tmp, ioaddr + CSR20);
1909
1910 /* Disable all wake-up events */
1911 tulip_set_wolopts(pdev, 0);
1912 }
1913 netif_device_attach(dev);
1914
1915 if (netif_running(dev))
1916 tulip_up(dev);
1917
1918 return 0;
1919 }
1920
1921 #endif /* CONFIG_PM */
1922
1923
1924 static void tulip_remove_one(struct pci_dev *pdev)
1925 {
1926 struct net_device *dev = pci_get_drvdata (pdev);
1927 struct tulip_private *tp;
1928
1929 if (!dev)
1930 return;
1931
1932 tp = netdev_priv(dev);
1933 unregister_netdev(dev);
1934 pci_free_consistent (pdev,
1935 sizeof (struct tulip_rx_desc) * RX_RING_SIZE +
1936 sizeof (struct tulip_tx_desc) * TX_RING_SIZE,
1937 tp->rx_ring, tp->rx_ring_dma);
1938 kfree (tp->mtable);
1939 pci_iounmap(pdev, tp->base_addr);
1940 free_netdev (dev);
1941 pci_release_regions (pdev);
1942 pci_disable_device(pdev);
1943
1944 /* pci_power_off (pdev, -1); */
1945 }
1946
1947 #ifdef CONFIG_NET_POLL_CONTROLLER
1948 /*
1949 * Polling 'interrupt' - used by things like netconsole to send skbs
1950 * without having to re-enable interrupts. It's not called while
1951 * the interrupt routine is executing.
1952 */
1953
1954 static void poll_tulip (struct net_device *dev)
1955 {
1956 struct tulip_private *tp = netdev_priv(dev);
1957 const int irq = tp->pdev->irq;
1958
1959 /* disable_irq here is not very nice, but with the lockless
1960 interrupt handler we have no other choice. */
1961 disable_irq(irq);
1962 tulip_interrupt (irq, dev);
1963 enable_irq(irq);
1964 }
1965 #endif
1966
1967 static struct pci_driver tulip_driver = {
1968 .name = DRV_NAME,
1969 .id_table = tulip_pci_tbl,
1970 .probe = tulip_init_one,
1971 .remove = tulip_remove_one,
1972 #ifdef CONFIG_PM
1973 .suspend = tulip_suspend,
1974 .resume = tulip_resume,
1975 #endif /* CONFIG_PM */
1976 };
1977
1978
1979 static int __init tulip_init (void)
1980 {
1981 #ifdef MODULE
1982 pr_info("%s", version);
1983 #endif
1984
1985 /* copy module parms into globals */
1986 tulip_rx_copybreak = rx_copybreak;
1987 tulip_max_interrupt_work = max_interrupt_work;
1988
1989 /* probe for and init boards */
1990 return pci_register_driver(&tulip_driver);
1991 }
1992
1993
1994 static void __exit tulip_cleanup (void)
1995 {
1996 pci_unregister_driver (&tulip_driver);
1997 }
1998
1999
2000 module_init(tulip_init);
2001 module_exit(tulip_cleanup);
Linux kernel - Deliverables
This page took 0.166671 seconds and 5 git commands to generate.