drivers/net/ethernet/intel/Kconfig

   1 #
   2 # Intel network device configuration
   3 #
   4
   5 config NET_VENDOR_INTEL
   6         bool "Intel devices"
   7         default y
   8         ---help---
   9           If you have a network (Ethernet) card belonging to this class, say Y
  10           and read the Ethernet-HOWTO, available from
  11           <http://www.tldp.org/docs.html#howto>.
  12
  13           Note that the answer to this question doesn't directly affect the
  14           kernel: saying N will just cause the configurator to skip all
  15           the questions about Intel cards. If you say Y, you will be asked for
  16           your specific card in the following questions.
  17
  18 if NET_VENDOR_INTEL
  19
  20 config E100
  21         tristate "Intel(R) PRO/100+ support"
  22         depends on PCI
  23         select MII
  24         ---help---
  25           This driver supports Intel(R) PRO/100 family of adapters.
  26           To verify that your adapter is supported, find the board ID number
  27           on the adapter. Look for a label that has a barcode and a number
  28           in the format 123456-001 (six digits hyphen three digits).
  29
  30           Use the above information and the Adapter & Driver ID Guide at:
  31
  32           <http://support.intel.com/support/network/adapter/pro100/21397.htm>
  33
  34           to identify the adapter.
  35
  36           For the latest Intel PRO/100 network driver for Linux, see:
  37
  38           <http://www.intel.com/p/en_US/support/highlights/network/pro100plus>
  39
  40           More specific information on configuring the driver is in
  41           <file:Documentation/networking/e100.txt>.
  42
  43           To compile this driver as a module, choose M here. The module
  44           will be called e100.
  45
  46 config E1000
  47         tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
  48         depends on PCI
  49         ---help---
  50           This driver supports Intel(R) PRO/1000 gigabit ethernet family of
  51           adapters.  For more information on how to identify your adapter, go
  52           to the Adapter & Driver ID Guide at:
  53
  54           <http://support.intel.com/support/network/adapter/pro100/21397.htm>
  55
  56           For general information and support, go to the Intel support
  57           website at:
  58
  59           <http://support.intel.com>
  60
  61           More specific information on configuring the driver is in
  62           <file:Documentation/networking/e1000.txt>.
  63
  64           To compile this driver as a module, choose M here. The module
  65           will be called e1000.
  66
  67 config E1000E
  68         tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
  69         depends on PCI && (!SPARC32 || BROKEN)
  70         select CRC32
  71         select PTP_1588_CLOCK
  72         ---help---
  73           This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
  74           ethernet family of adapters. For PCI or PCI-X e1000 adapters,
  75           use the regular e1000 driver For more information on how to
  76           identify your adapter, go to the Adapter & Driver ID Guide at:
  77
  78           <http://support.intel.com/support/network/adapter/pro100/21397.htm>
  79
  80           For general information and support, go to the Intel support
  81           website at:
  82
  83           <http://support.intel.com>
  84
  85           To compile this driver as a module, choose M here. The module
  86           will be called e1000e.
  87
  88 config IGB
  89         tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
  90         depends on PCI
  91         select PTP_1588_CLOCK
  92         select I2C
  93         select I2C_ALGOBIT
  94         ---help---
  95           This driver supports Intel(R) 82575/82576 gigabit ethernet family of
  96           adapters.  For more information on how to identify your adapter, go
  97           to the Adapter & Driver ID Guide at:
  98
  99           <http://support.intel.com/support/network/adapter/pro100/21397.htm>
 100
 101           For general information and support, go to the Intel support
 102           website at:
 103
 104           <http://support.intel.com>
 105
 106           More specific information on configuring the driver is in
 107           <file:Documentation/networking/e1000.txt>.
 108
 109           To compile this driver as a module, choose M here. The module
 110           will be called igb.
 111
 112 config IGB_HWMON
 113         bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
 114         default y
 115         depends on IGB && HWMON && !(IGB=y && HWMON=m)
 116         ---help---
 117           Say Y if you want to expose thermal sensor data on Intel devices.
 118
 119           Some of our devices contain thermal sensors, both external and internal.
 120           This data is available via the hwmon sysfs interface and exposes
 121           the onboard sensors.
 122
 123 config IGB_DCA
 124         bool "Direct Cache Access (DCA) Support"
 125         default y
 126         depends on IGB && DCA && !(IGB=y && DCA=m)
 127         ---help---
 128           Say Y here if you want to use Direct Cache Access (DCA) in the
 129           driver.  DCA is a method for warming the CPU cache before data
 130           is used, with the intent of lessening the impact of cache misses.
 131
 132 config IGBVF
 133         tristate "Intel(R) 82576 Virtual Function Ethernet support"
 134         depends on PCI
 135         ---help---
 136           This driver supports Intel(R) 82576 virtual functions.  For more
 137           information on how to identify your adapter, go to the Adapter &
 138           Driver ID Guide at:
 139
 140           <http://support.intel.com/support/network/adapter/pro100/21397.htm>
 141
 142           For general information and support, go to the Intel support
 143           website at:
 144
 145           <http://support.intel.com>
 146
 147           More specific information on configuring the driver is in
 148           <file:Documentation/networking/e1000.txt>.
 149
 150           To compile this driver as a module, choose M here. The module
 151           will be called igbvf.
 152
 153 config IXGB
 154         tristate "Intel(R) PRO/10GbE support"
 155         depends on PCI
 156         ---help---
 157           This driver supports Intel(R) PRO/10GbE family of adapters for
 158           PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
 159           instead. For more information on how to identify your adapter, go
 160           to the Adapter & Driver ID Guide at:
 161
 162           <http://support.intel.com/support/network/adapter/pro100/21397.htm>
 163
 164           For general information and support, go to the Intel support
 165           website at:
 166
 167           <http://support.intel.com>
 168
 169           More specific information on configuring the driver is in
 170           <file:Documentation/networking/ixgb.txt>.
 171
 172           To compile this driver as a module, choose M here. The module
 173           will be called ixgb.
 174
 175 config IXGBE
 176         tristate "Intel(R) 10GbE PCI Express adapters support"
 177         depends on PCI
 178         select MDIO
 179         select PTP_1588_CLOCK
 180         ---help---
 181           This driver supports Intel(R) 10GbE PCI Express family of
 182           adapters.  For more information on how to identify your adapter, go
 183           to the Adapter & Driver ID Guide at:
 184
 185           <http://support.intel.com/support/network/adapter/pro100/21397.htm>
 186
 187           For general information and support, go to the Intel support
 188           website at:
 189
 190           <http://support.intel.com>
 191
 192           To compile this driver as a module, choose M here. The module
 193           will be called ixgbe.
 194
 195 config IXGBE_HWMON
 196         bool "Intel(R) 10GbE PCI Express adapters HWMON support"
 197         default y
 198         depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
 199         ---help---
 200           Say Y if you want to expose the thermal sensor data on some of
 201           our cards, via a hwmon sysfs interface.
 202
 203 config IXGBE_DCA
 204         bool "Direct Cache Access (DCA) Support"
 205         default y
 206         depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
 207         ---help---
 208           Say Y here if you want to use Direct Cache Access (DCA) in the
 209           driver.  DCA is a method for warming the CPU cache before data
 210           is used, with the intent of lessening the impact of cache misses.
 211
 212 config IXGBE_DCB
 213         bool "Data Center Bridging (DCB) Support"
 214         default n
 215         depends on IXGBE && DCB
 216         ---help---
 217           Say Y here if you want to use Data Center Bridging (DCB) in the
 218           driver.
 219
 220           If unsure, say N.
 221
 222 config IXGBEVF
 223         tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"
 224         depends on PCI_MSI
 225         ---help---
 226           This driver supports Intel(R) PCI Express virtual functions for the
 227           Intel(R) ixgbe driver.  For more information on how to identify your
 228           adapter, go to the Adapter & Driver ID Guide at:
 229
 230           <http://support.intel.com/support/network/sb/CS-008441.htm>
 231
 232           For general information and support, go to the Intel support
 233           website at:
 234
 235           <http://support.intel.com>
 236
 237           More specific information on configuring the driver is in
 238           <file:Documentation/networking/ixgbevf.txt>.
 239
 240           To compile this driver as a module, choose M here. The module
 241           will be called ixgbevf.  MSI-X interrupt support is required
 242           for this driver to work correctly.
 243
 244 config I40E
 245         tristate "Intel(R) Ethernet Controller XL710 Family support"
 246         select PTP_1588_CLOCK
 247         depends on PCI
 248         ---help---
 249           This driver supports Intel(R) Ethernet Controller XL710 Family of
 250           devices.  For more information on how to identify your adapter, go
 251           to the Adapter & Driver ID Guide at:
 252
 253           <http://support.intel.com/support/network/adapter/pro100/21397.htm>
 254
 255           For general information and support, go to the Intel support
 256           website at:
 257
 258           <http://support.intel.com>
 259
 260           To compile this driver as a module, choose M here. The module
 261           will be called i40e.
 262
 263 config I40E_VXLAN
 264         bool "Virtual eXtensible Local Area Network Support"
 265         default n
 266         depends on I40E && VXLAN && !(I40E=y && VXLAN=m)
 267         ---help---
 268           This allows one to create VXLAN virtual interfaces that provide
 269           Layer 2 Networks over Layer 3 Networks. VXLAN is often used
 270           to tunnel virtual network infrastructure in virtualized environments.
 271           Say Y here if you want to use Virtual eXtensible Local Area Network
 272           (VXLAN) in the driver.
 273
 274 config I40E_DCB
 275         bool "Data Center Bridging (DCB) Support"
 276         default n
 277         depends on I40E && DCB
 278         ---help---
 279           Say Y here if you want to use Data Center Bridging (DCB) in the
 280           driver.
 281
 282           If unsure, say N.
 283
 284 config I40EVF
 285         tristate "Intel(R) XL710 X710 Virtual Function Ethernet support"
 286         depends on PCI_MSI
 287         ---help---
 288           This driver supports Intel(R) XL710 and X710 virtual functions.
 289           For more information on how to identify your adapter, go to the
 290           Adapter & Driver ID Guide at:
 291
 292           <http://support.intel.com/support/network/sb/CS-008441.htm>
 293
 294           For general information and support, go to the Intel support
 295           website at:
 296
 297           <http://support.intel.com>
 298
 299           To compile this driver as a module, choose M here. The module
 300           will be called i40evf.  MSI-X interrupt support is required
 301           for this driver to work correctly.
 302
 303 endif # NET_VENDOR_INTEL