drivers/net/ethernet/intel/e1000e/param.c

   1 /*******************************************************************************
   2
   3   Intel PRO/1000 Linux driver
   4   Copyright(c) 1999 - 2012 Intel Corporation.
   5
   6   This program is free software; you can redistribute it and/or modify it
   7   under the terms and conditions of the GNU General Public License,
   8   version 2, as published by the Free Software Foundation.
   9
  10   This program is distributed in the hope it will be useful, but WITHOUT
  11   ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
  12   FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
  13   more details.
  14
  15   You should have received a copy of the GNU General Public License along with
  16   this program; if not, write to the Free Software Foundation, Inc.,
  17   51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
  18
  19   The full GNU General Public License is included in this distribution in
  20   the file called "COPYING".
  21
  22   Contact Information:
  23   Linux NICS <linux.nics@intel.com>
  24   e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
  25   Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
  26
  27 *******************************************************************************/
  28
  29 #include <linux/netdevice.h>
  30 #include <linux/module.h>
  31 #include <linux/pci.h>
  32
  33 #include "e1000.h"
  34
  35 /*
  36  * This is the only thing that needs to be changed to adjust the
  37  * maximum number of ports that the driver can manage.
  38  */
  39
  40 #define E1000_MAX_NIC 32
  41
  42 #define OPTION_UNSET   -1
  43 #define OPTION_DISABLED 0
  44 #define OPTION_ENABLED  1
  45
  46 #define COPYBREAK_DEFAULT 256
  47 unsigned int copybreak = COPYBREAK_DEFAULT;
  48 module_param(copybreak, uint, 0644);
  49 MODULE_PARM_DESC(copybreak,
  50         "Maximum size of packet that is copied to a new buffer on receive");
  51
  52 /*
  53  * All parameters are treated the same, as an integer array of values.
  54  * This macro just reduces the need to repeat the same declaration code
  55  * over and over (plus this helps to avoid typo bugs).
  56  */
  57
  58 #define E1000_PARAM_INIT { [0 ... E1000_MAX_NIC] = OPTION_UNSET }
  59 #define E1000_PARAM(X, desc)                                    \
  60         static int __devinitdata X[E1000_MAX_NIC+1]             \
  61                 = E1000_PARAM_INIT;                             \
  62         static unsigned int num_##X;                            \
  63         module_param_array_named(X, X, int, &num_##X, 0);       \
  64         MODULE_PARM_DESC(X, desc);
  65
  66 /*
  67  * Transmit Interrupt Delay in units of 1.024 microseconds
  68  * Tx interrupt delay needs to typically be set to something non-zero
  69  *
  70  * Valid Range: 0-65535
  71  */
  72 E1000_PARAM(TxIntDelay, "Transmit Interrupt Delay");
  73 #define DEFAULT_TIDV 8
  74 #define MAX_TXDELAY 0xFFFF
  75 #define MIN_TXDELAY 0
  76
  77 /*
  78  * Transmit Absolute Interrupt Delay in units of 1.024 microseconds
  79  *
  80  * Valid Range: 0-65535
  81  */
  82 E1000_PARAM(TxAbsIntDelay, "Transmit Absolute Interrupt Delay");
  83 #define DEFAULT_TADV 32
  84 #define MAX_TXABSDELAY 0xFFFF
  85 #define MIN_TXABSDELAY 0
  86
  87 /*
  88  * Receive Interrupt Delay in units of 1.024 microseconds
  89  * hardware will likely hang if you set this to anything but zero.
  90  *
  91  * Valid Range: 0-65535
  92  */
  93 E1000_PARAM(RxIntDelay, "Receive Interrupt Delay");
  94 #define MAX_RXDELAY 0xFFFF
  95 #define MIN_RXDELAY 0
  96
  97 /*
  98  * Receive Absolute Interrupt Delay in units of 1.024 microseconds
  99  *
 100  * Valid Range: 0-65535
 101  */
 102 E1000_PARAM(RxAbsIntDelay, "Receive Absolute Interrupt Delay");
 103 #define MAX_RXABSDELAY 0xFFFF
 104 #define MIN_RXABSDELAY 0
 105
 106 /*
 107  * Interrupt Throttle Rate (interrupts/sec)
 108  *
 109  * Valid Range: 100-100000 (0=off, 1=dynamic, 3=dynamic conservative)
 110  */
 111 E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate");
 112 #define DEFAULT_ITR 3
 113 #define MAX_ITR 100000
 114 #define MIN_ITR 100
 115
 116 /*
 117  * IntMode (Interrupt Mode)
 118  *
 119  * Valid Range: varies depending on kernel configuration & hardware support
 120  *
 121  * legacy=0, MSI=1, MSI-X=2
 122  *
 123  * When MSI/MSI-X support is enabled in kernel-
 124  *   Default Value: 2 (MSI-X) when supported by hardware, 1 (MSI) otherwise
 125  * When MSI/MSI-X support is not enabled in kernel-
 126  *   Default Value: 0 (legacy)
 127  *
 128  * When a mode is specified that is not allowed/supported, it will be
 129  * demoted to the most advanced interrupt mode available.
 130  */
 131 E1000_PARAM(IntMode, "Interrupt Mode");
 132 #define MAX_INTMODE     2
 133 #define MIN_INTMODE     0
 134
 135 /*
 136  * Enable Smart Power Down of the PHY
 137  *
 138  * Valid Range: 0, 1
 139  *
 140  * Default Value: 0 (disabled)
 141  */
 142 E1000_PARAM(SmartPowerDownEnable, "Enable PHY smart power down");
 143
 144 /*
 145  * Enable Kumeran Lock Loss workaround
 146  *
 147  * Valid Range: 0, 1
 148  *
 149  * Default Value: 1 (enabled)
 150  */
 151 E1000_PARAM(KumeranLockLoss, "Enable Kumeran lock loss workaround");
 152
 153 /*
 154  * Write Protect NVM
 155  *
 156  * Valid Range: 0, 1
 157  *
 158  * Default Value: 1 (enabled)
 159  */
 160 E1000_PARAM(WriteProtectNVM, "Write-protect NVM [WARNING: disabling this can lead to corrupted NVM]");
 161
 162 /*
 163  * Enable CRC Stripping
 164  *
 165  * Valid Range: 0, 1
 166  *
 167  * Default Value: 1 (enabled)
 168  */
 169 E1000_PARAM(CrcStripping, "Enable CRC Stripping, disable if your BMC needs " \
 170                           "the CRC");
 171
 172 struct e1000_option {
 173         enum { enable_option, range_option, list_option } type;
 174         const char *name;
 175         const char *err;
 176         int def;
 177         union {
 178                 struct { /* range_option info */
 179                         int min;
 180                         int max;
 181                 } r;
 182                 struct { /* list_option info */
 183                         int nr;
 184                         struct e1000_opt_list { int i; char *str; } *p;
 185                 } l;
 186         } arg;
 187 };
 188
 189 static int __devinit e1000_validate_option(unsigned int *value,
 190                                            const struct e1000_option *opt,
 191                                            struct e1000_adapter *adapter)
 192 {
 193         if (*value == OPTION_UNSET) {
 194                 *value = opt->def;
 195                 return 0;
 196         }
 197
 198         switch (opt->type) {
 199         case enable_option:
 200                 switch (*value) {
 201                 case OPTION_ENABLED:
 202                         e_info("%s Enabled\n", opt->name);
 203                         return 0;
 204                 case OPTION_DISABLED:
 205                         e_info("%s Disabled\n", opt->name);
 206                         return 0;
 207                 }
 208                 break;
 209         case range_option:
 210                 if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
 211                         e_info("%s set to %i\n", opt->name, *value);
 212                         return 0;
 213                 }
 214                 break;
 215         case list_option: {
 216                 int i;
 217                 struct e1000_opt_list *ent;
 218
 219                 for (i = 0; i < opt->arg.l.nr; i++) {
 220                         ent = &opt->arg.l.p[i];
 221                         if (*value == ent->i) {
 222                                 if (ent->str[0] != '\0')
 223                                         e_info("%s\n", ent->str);
 224                                 return 0;
 225                         }
 226                 }
 227         }
 228                 break;
 229         default:
 230                 BUG();
 231         }
 232
 233         e_info("Invalid %s value specified (%i) %s\n", opt->name, *value,
 234                opt->err);
 235         *value = opt->def;
 236         return -1;
 237 }
 238
 239 /**
 240  * e1000e_check_options - Range Checking for Command Line Parameters
 241  * @adapter: board private structure
 242  *
 243  * This routine checks all command line parameters for valid user
 244  * input.  If an invalid value is given, or if no user specified
 245  * value exists, a default value is used.  The final value is stored
 246  * in a variable in the adapter structure.
 247  **/
 248 void __devinit e1000e_check_options(struct e1000_adapter *adapter)
 249 {
 250         struct e1000_hw *hw = &adapter->hw;
 251         int bd = adapter->bd_number;
 252
 253         if (bd >= E1000_MAX_NIC) {
 254                 e_notice("Warning: no configuration for board #%i\n", bd);
 255                 e_notice("Using defaults for all values\n");
 256         }
 257
 258         { /* Transmit Interrupt Delay */
 259                 static const struct e1000_option opt = {
 260                         .type = range_option,
 261                         .name = "Transmit Interrupt Delay",
 262                         .err  = "using default of "
 263                                 __MODULE_STRING(DEFAULT_TIDV),
 264                         .def  = DEFAULT_TIDV,
 265                         .arg  = { .r = { .min = MIN_TXDELAY,
 266                                          .max = MAX_TXDELAY } }
 267                 };
 268
 269                 if (num_TxIntDelay > bd) {
 270                         adapter->tx_int_delay = TxIntDelay[bd];
 271                         e1000_validate_option(&adapter->tx_int_delay, &opt,
 272                                               adapter);
 273                 } else {
 274                         adapter->tx_int_delay = opt.def;
 275                 }
 276         }
 277         { /* Transmit Absolute Interrupt Delay */
 278                 static const struct e1000_option opt = {
 279                         .type = range_option,
 280                         .name = "Transmit Absolute Interrupt Delay",
 281                         .err  = "using default of "
 282                                 __MODULE_STRING(DEFAULT_TADV),
 283                         .def  = DEFAULT_TADV,
 284                         .arg  = { .r = { .min = MIN_TXABSDELAY,
 285                                          .max = MAX_TXABSDELAY } }
 286                 };
 287
 288                 if (num_TxAbsIntDelay > bd) {
 289                         adapter->tx_abs_int_delay = TxAbsIntDelay[bd];
 290                         e1000_validate_option(&adapter->tx_abs_int_delay, &opt,
 291                                               adapter);
 292                 } else {
 293                         adapter->tx_abs_int_delay = opt.def;
 294                 }
 295         }
 296         { /* Receive Interrupt Delay */
 297                 static struct e1000_option opt = {
 298                         .type = range_option,
 299                         .name = "Receive Interrupt Delay",
 300                         .err  = "using default of "
 301                                 __MODULE_STRING(DEFAULT_RDTR),
 302                         .def  = DEFAULT_RDTR,
 303                         .arg  = { .r = { .min = MIN_RXDELAY,
 304                                          .max = MAX_RXDELAY } }
 305                 };
 306
 307                 if (num_RxIntDelay > bd) {
 308                         adapter->rx_int_delay = RxIntDelay[bd];
 309                         e1000_validate_option(&adapter->rx_int_delay, &opt,
 310                                               adapter);
 311                 } else {
 312                         adapter->rx_int_delay = opt.def;
 313                 }
 314         }
 315         { /* Receive Absolute Interrupt Delay */
 316                 static const struct e1000_option opt = {
 317                         .type = range_option,
 318                         .name = "Receive Absolute Interrupt Delay",
 319                         .err  = "using default of "
 320                                 __MODULE_STRING(DEFAULT_RADV),
 321                         .def  = DEFAULT_RADV,
 322                         .arg  = { .r = { .min = MIN_RXABSDELAY,
 323                                          .max = MAX_RXABSDELAY } }
 324                 };
 325
 326                 if (num_RxAbsIntDelay > bd) {
 327                         adapter->rx_abs_int_delay = RxAbsIntDelay[bd];
 328                         e1000_validate_option(&adapter->rx_abs_int_delay, &opt,
 329                                               adapter);
 330                 } else {
 331                         adapter->rx_abs_int_delay = opt.def;
 332                 }
 333         }
 334         { /* Interrupt Throttling Rate */
 335                 static const struct e1000_option opt = {
 336                         .type = range_option,
 337                         .name = "Interrupt Throttling Rate (ints/sec)",
 338                         .err  = "using default of "
 339                                 __MODULE_STRING(DEFAULT_ITR),
 340                         .def  = DEFAULT_ITR,
 341                         .arg  = { .r = { .min = MIN_ITR,
 342                                          .max = MAX_ITR } }
 343                 };
 344
 345                 if (num_InterruptThrottleRate > bd) {
 346                         adapter->itr = InterruptThrottleRate[bd];
 347                         switch (adapter->itr) {
 348                         case 0:
 349                                 e_info("%s turned off\n", opt.name);
 350                                 break;
 351                         case 1:
 352                                 e_info("%s set to dynamic mode\n", opt.name);
 353                                 adapter->itr_setting = adapter->itr;
 354                                 adapter->itr = 20000;
 355                                 break;
 356                         case 3:
 357                                 e_info("%s set to dynamic conservative mode\n",
 358                                         opt.name);
 359                                 adapter->itr_setting = adapter->itr;
 360                                 adapter->itr = 20000;
 361                                 break;
 362                         case 4:
 363                                 e_info("%s set to simplified (2000-8000 ints) "
 364                                        "mode\n", opt.name);
 365                                 adapter->itr_setting = 4;
 366                                 break;
 367                         default:
 368                                 /*
 369                                  * Save the setting, because the dynamic bits
 370                                  * change itr.
 371                                  */
 372                                 if (e1000_validate_option(&adapter->itr, &opt,
 373                                                           adapter) &&
 374                                     (adapter->itr == 3)) {
 375                                         /*
 376                                          * In case of invalid user value,
 377                                          * default to conservative mode.
 378                                          */
 379                                         adapter->itr_setting = adapter->itr;
 380                                         adapter->itr = 20000;
 381                                 } else {
 382                                         /*
 383                                          * Clear the lower two bits because
 384                                          * they are used as control.
 385                                          */
 386                                         adapter->itr_setting =
 387                                                 adapter->itr & ~3;
 388                                 }
 389                                 break;
 390                         }
 391                 } else {
 392                         adapter->itr_setting = opt.def;
 393                         adapter->itr = 20000;
 394                 }
 395         }
 396         { /* Interrupt Mode */
 397                 static struct e1000_option opt = {
 398                         .type = range_option,
 399                         .name = "Interrupt Mode",
 400 #ifndef CONFIG_PCI_MSI
 401                         .err  = "defaulting to 0 (legacy)",
 402                         .def  = E1000E_INT_MODE_LEGACY,
 403                         .arg  = { .r = { .min = 0,
 404                                          .max = 0 } }
 405 #endif
 406                 };
 407
 408 #ifdef CONFIG_PCI_MSI
 409                 if (adapter->flags & FLAG_HAS_MSIX) {
 410                         opt.err = kstrdup("defaulting to 2 (MSI-X)",
 411                                           GFP_KERNEL);
 412                         opt.def = E1000E_INT_MODE_MSIX;
 413                         opt.arg.r.max = E1000E_INT_MODE_MSIX;
 414                 } else {
 415                         opt.err = kstrdup("defaulting to 1 (MSI)", GFP_KERNEL);
 416                         opt.def = E1000E_INT_MODE_MSI;
 417                         opt.arg.r.max = E1000E_INT_MODE_MSI;
 418                 }
 419
 420                 if (!opt.err) {
 421                         dev_err(&adapter->pdev->dev,
 422                                 "Failed to allocate memory\n");
 423                         return;
 424                 }
 425 #endif
 426
 427                 if (num_IntMode > bd) {
 428                         unsigned int int_mode = IntMode[bd];
 429                         e1000_validate_option(&int_mode, &opt, adapter);
 430                         adapter->int_mode = int_mode;
 431                 } else {
 432                         adapter->int_mode = opt.def;
 433                 }
 434
 435 #ifdef CONFIG_PCI_MSI
 436                 kfree(opt.err);
 437 #endif
 438         }
 439         { /* Smart Power Down */
 440                 static const struct e1000_option opt = {
 441                         .type = enable_option,
 442                         .name = "PHY Smart Power Down",
 443                         .err  = "defaulting to Disabled",
 444                         .def  = OPTION_DISABLED
 445                 };
 446
 447                 if (num_SmartPowerDownEnable > bd) {
 448                         unsigned int spd = SmartPowerDownEnable[bd];
 449                         e1000_validate_option(&spd, &opt, adapter);
 450                         if ((adapter->flags & FLAG_HAS_SMART_POWER_DOWN)
 451                             && spd)
 452                                 adapter->flags |= FLAG_SMART_POWER_DOWN;
 453                 }
 454         }
 455         { /* CRC Stripping */
 456                 static const struct e1000_option opt = {
 457                         .type = enable_option,
 458                         .name = "CRC Stripping",
 459                         .err  = "defaulting to Enabled",
 460                         .def  = OPTION_ENABLED
 461                 };
 462
 463                 if (num_CrcStripping > bd) {
 464                         unsigned int crc_stripping = CrcStripping[bd];
 465                         e1000_validate_option(&crc_stripping, &opt, adapter);
 466                         if (crc_stripping == OPTION_ENABLED) {
 467                                 adapter->flags2 |= FLAG2_CRC_STRIPPING;
 468                                 adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
 469                         }
 470                 } else {
 471                         adapter->flags2 |= FLAG2_CRC_STRIPPING;
 472                         adapter->flags2 |= FLAG2_DFLT_CRC_STRIPPING;
 473                 }
 474         }
 475         { /* Kumeran Lock Loss Workaround */
 476                 static const struct e1000_option opt = {
 477                         .type = enable_option,
 478                         .name = "Kumeran Lock Loss Workaround",
 479                         .err  = "defaulting to Enabled",
 480                         .def  = OPTION_ENABLED
 481                 };
 482
 483                 if (num_KumeranLockLoss > bd) {
 484                         unsigned int kmrn_lock_loss = KumeranLockLoss[bd];
 485                         e1000_validate_option(&kmrn_lock_loss, &opt, adapter);
 486                         if (hw->mac.type == e1000_ich8lan)
 487                                 e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
 488                                                                 kmrn_lock_loss);
 489                 } else {
 490                         if (hw->mac.type == e1000_ich8lan)
 491                                 e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw,
 492                                                                        opt.def);
 493                 }
 494         }
 495         { /* Write-protect NVM */
 496                 static const struct e1000_option opt = {
 497                         .type = enable_option,
 498                         .name = "Write-protect NVM",
 499                         .err  = "defaulting to Enabled",
 500                         .def  = OPTION_ENABLED
 501                 };
 502
 503                 if (adapter->flags & FLAG_IS_ICH) {
 504                         if (num_WriteProtectNVM > bd) {
 505                                 unsigned int write_protect_nvm = WriteProtectNVM[bd];
 506                                 e1000_validate_option(&write_protect_nvm, &opt,
 507                                                       adapter);
 508                                 if (write_protect_nvm)
 509                                         adapter->flags |= FLAG_READ_ONLY_NVM;
 510                         } else {
 511                                 if (opt.def)
 512                                         adapter->flags |= FLAG_READ_ONLY_NVM;
 513                         }
 514                 }
 515         }
 516 }