1 /*******************************************************************************
3 * Intel Ethernet Controller XL710 Family Linux Driver
4 * Copyright(c) 2013 - 2016 Intel Corporation.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms and conditions of the GNU General Public License,
8 * version 2, as published by the Free Software Foundation.
10 * This program is distributed in the hope it will be useful, but WITHOUT
11 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 * You should have received a copy of the GNU General Public License along
16 * with this program. If not, see <http://www.gnu.org/licenses/>.
18 * The full GNU General Public License is included in this distribution in
19 * the file called "COPYING".
21 * Contact Information:
22 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
23 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
25 ******************************************************************************/
27 #include <linux/etherdevice.h>
28 #include <linux/of_net.h>
29 #include <linux/pci.h>
33 #include "i40e_diag.h"
34 #include <net/udp_tunnel.h>
36 const char i40e_driver_name
[] = "i40e";
37 static const char i40e_driver_string
[] =
38 "Intel(R) Ethernet Connection XL710 Network Driver";
42 #define DRV_VERSION_MAJOR 1
43 #define DRV_VERSION_MINOR 6
44 #define DRV_VERSION_BUILD 11
45 #define DRV_VERSION __stringify(DRV_VERSION_MAJOR) "." \
46 __stringify(DRV_VERSION_MINOR) "." \
47 __stringify(DRV_VERSION_BUILD) DRV_KERN
48 const char i40e_driver_version_str
[] = DRV_VERSION
;
49 static const char i40e_copyright
[] = "Copyright (c) 2013 - 2014 Intel Corporation.";
51 /* a bit of forward declarations */
52 static void i40e_vsi_reinit_locked(struct i40e_vsi
*vsi
);
53 static void i40e_handle_reset_warning(struct i40e_pf
*pf
);
54 static int i40e_add_vsi(struct i40e_vsi
*vsi
);
55 static int i40e_add_veb(struct i40e_veb
*veb
, struct i40e_vsi
*vsi
);
56 static int i40e_setup_pf_switch(struct i40e_pf
*pf
, bool reinit
);
57 static int i40e_setup_misc_vector(struct i40e_pf
*pf
);
58 static void i40e_determine_queue_usage(struct i40e_pf
*pf
);
59 static int i40e_setup_pf_filter_control(struct i40e_pf
*pf
);
60 static void i40e_fill_rss_lut(struct i40e_pf
*pf
, u8
*lut
,
61 u16 rss_table_size
, u16 rss_size
);
62 static void i40e_fdir_sb_setup(struct i40e_pf
*pf
);
63 static int i40e_veb_get_bw_info(struct i40e_veb
*veb
);
65 /* i40e_pci_tbl - PCI Device ID Table
67 * Last entry must be all 0s
69 * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
70 * Class, Class Mask, private data (not used) }
72 static const struct pci_device_id i40e_pci_tbl
[] = {
73 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_SFP_XL710
), 0},
74 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_QEMU
), 0},
75 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_KX_B
), 0},
76 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_KX_C
), 0},
77 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_QSFP_A
), 0},
78 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_QSFP_B
), 0},
79 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_QSFP_C
), 0},
80 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_10G_BASE_T
), 0},
81 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_10G_BASE_T4
), 0},
82 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_20G_KR2
), 0},
83 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_KX_X722
), 0},
84 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_QSFP_X722
), 0},
85 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_SFP_X722
), 0},
86 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_1G_BASE_T_X722
), 0},
87 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_10G_BASE_T_X722
), 0},
88 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_SFP_I_X722
), 0},
89 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_20G_KR2
), 0},
90 {PCI_VDEVICE(INTEL
, I40E_DEV_ID_20G_KR2_A
), 0},
91 /* required last entry */
94 MODULE_DEVICE_TABLE(pci
, i40e_pci_tbl
);
96 #define I40E_MAX_VF_COUNT 128
97 static int debug
= -1;
98 module_param(debug
, int, 0);
99 MODULE_PARM_DESC(debug
, "Debug level (0=none,...,16=all)");
101 MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
102 MODULE_DESCRIPTION("Intel(R) Ethernet Connection XL710 Network Driver");
103 MODULE_LICENSE("GPL");
104 MODULE_VERSION(DRV_VERSION
);
106 static struct workqueue_struct
*i40e_wq
;
109 * i40e_allocate_dma_mem_d - OS specific memory alloc for shared code
110 * @hw: pointer to the HW structure
111 * @mem: ptr to mem struct to fill out
112 * @size: size of memory requested
113 * @alignment: what to align the allocation to
115 int i40e_allocate_dma_mem_d(struct i40e_hw
*hw
, struct i40e_dma_mem
*mem
,
116 u64 size
, u32 alignment
)
118 struct i40e_pf
*pf
= (struct i40e_pf
*)hw
->back
;
120 mem
->size
= ALIGN(size
, alignment
);
121 mem
->va
= dma_zalloc_coherent(&pf
->pdev
->dev
, mem
->size
,
122 &mem
->pa
, GFP_KERNEL
);
130 * i40e_free_dma_mem_d - OS specific memory free for shared code
131 * @hw: pointer to the HW structure
132 * @mem: ptr to mem struct to free
134 int i40e_free_dma_mem_d(struct i40e_hw
*hw
, struct i40e_dma_mem
*mem
)
136 struct i40e_pf
*pf
= (struct i40e_pf
*)hw
->back
;
138 dma_free_coherent(&pf
->pdev
->dev
, mem
->size
, mem
->va
, mem
->pa
);
147 * i40e_allocate_virt_mem_d - OS specific memory alloc for shared code
148 * @hw: pointer to the HW structure
149 * @mem: ptr to mem struct to fill out
150 * @size: size of memory requested
152 int i40e_allocate_virt_mem_d(struct i40e_hw
*hw
, struct i40e_virt_mem
*mem
,
156 mem
->va
= kzalloc(size
, GFP_KERNEL
);
165 * i40e_free_virt_mem_d - OS specific memory free for shared code
166 * @hw: pointer to the HW structure
167 * @mem: ptr to mem struct to free
169 int i40e_free_virt_mem_d(struct i40e_hw
*hw
, struct i40e_virt_mem
*mem
)
171 /* it's ok to kfree a NULL pointer */
180 * i40e_get_lump - find a lump of free generic resource
181 * @pf: board private structure
182 * @pile: the pile of resource to search
183 * @needed: the number of items needed
184 * @id: an owner id to stick on the items assigned
186 * Returns the base item index of the lump, or negative for error
188 * The search_hint trick and lack of advanced fit-finding only work
189 * because we're highly likely to have all the same size lump requests.
190 * Linear search time and any fragmentation should be minimal.
192 static int i40e_get_lump(struct i40e_pf
*pf
, struct i40e_lump_tracking
*pile
,
198 if (!pile
|| needed
== 0 || id
>= I40E_PILE_VALID_BIT
) {
199 dev_info(&pf
->pdev
->dev
,
200 "param err: pile=%p needed=%d id=0x%04x\n",
205 /* start the linear search with an imperfect hint */
206 i
= pile
->search_hint
;
207 while (i
< pile
->num_entries
) {
208 /* skip already allocated entries */
209 if (pile
->list
[i
] & I40E_PILE_VALID_BIT
) {
214 /* do we have enough in this lump? */
215 for (j
= 0; (j
< needed
) && ((i
+j
) < pile
->num_entries
); j
++) {
216 if (pile
->list
[i
+j
] & I40E_PILE_VALID_BIT
)
221 /* there was enough, so assign it to the requestor */
222 for (j
= 0; j
< needed
; j
++)
223 pile
->list
[i
+j
] = id
| I40E_PILE_VALID_BIT
;
225 pile
->search_hint
= i
+ j
;
229 /* not enough, so skip over it and continue looking */
237 * i40e_put_lump - return a lump of generic resource
238 * @pile: the pile of resource to search
239 * @index: the base item index
240 * @id: the owner id of the items assigned
242 * Returns the count of items in the lump
244 static int i40e_put_lump(struct i40e_lump_tracking
*pile
, u16 index
, u16 id
)
246 int valid_id
= (id
| I40E_PILE_VALID_BIT
);
250 if (!pile
|| index
>= pile
->num_entries
)
254 i
< pile
->num_entries
&& pile
->list
[i
] == valid_id
;
260 if (count
&& index
< pile
->search_hint
)
261 pile
->search_hint
= index
;
267 * i40e_find_vsi_from_id - searches for the vsi with the given id
268 * @pf - the pf structure to search for the vsi
269 * @id - id of the vsi it is searching for
271 struct i40e_vsi
*i40e_find_vsi_from_id(struct i40e_pf
*pf
, u16 id
)
275 for (i
= 0; i
< pf
->num_alloc_vsi
; i
++)
276 if (pf
->vsi
[i
] && (pf
->vsi
[i
]->id
== id
))
283 * i40e_service_event_schedule - Schedule the service task to wake up
284 * @pf: board private structure
286 * If not already scheduled, this puts the task into the work queue
288 void i40e_service_event_schedule(struct i40e_pf
*pf
)
290 if (!test_bit(__I40E_DOWN
, &pf
->state
) &&
291 !test_bit(__I40E_RESET_RECOVERY_PENDING
, &pf
->state
) &&
292 !test_and_set_bit(__I40E_SERVICE_SCHED
, &pf
->state
))
293 queue_work(i40e_wq
, &pf
->service_task
);
297 * i40e_tx_timeout - Respond to a Tx Hang
298 * @netdev: network interface device structure
300 * If any port has noticed a Tx timeout, it is likely that the whole
301 * device is munged, not just the one netdev port, so go for the full
305 void i40e_tx_timeout(struct net_device
*netdev
)
307 static void i40e_tx_timeout(struct net_device
*netdev
)
310 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
311 struct i40e_vsi
*vsi
= np
->vsi
;
312 struct i40e_pf
*pf
= vsi
->back
;
313 struct i40e_ring
*tx_ring
= NULL
;
314 unsigned int i
, hung_queue
= 0;
317 pf
->tx_timeout_count
++;
319 /* find the stopped queue the same way the stack does */
320 for (i
= 0; i
< netdev
->num_tx_queues
; i
++) {
321 struct netdev_queue
*q
;
322 unsigned long trans_start
;
324 q
= netdev_get_tx_queue(netdev
, i
);
325 trans_start
= q
->trans_start
;
326 if (netif_xmit_stopped(q
) &&
328 (trans_start
+ netdev
->watchdog_timeo
))) {
334 if (i
== netdev
->num_tx_queues
) {
335 netdev_info(netdev
, "tx_timeout: no netdev hung queue found\n");
337 /* now that we have an index, find the tx_ring struct */
338 for (i
= 0; i
< vsi
->num_queue_pairs
; i
++) {
339 if (vsi
->tx_rings
[i
] && vsi
->tx_rings
[i
]->desc
) {
341 vsi
->tx_rings
[i
]->queue_index
) {
342 tx_ring
= vsi
->tx_rings
[i
];
349 if (time_after(jiffies
, (pf
->tx_timeout_last_recovery
+ HZ
*20)))
350 pf
->tx_timeout_recovery_level
= 1; /* reset after some time */
351 else if (time_before(jiffies
,
352 (pf
->tx_timeout_last_recovery
+ netdev
->watchdog_timeo
)))
353 return; /* don't do any new action before the next timeout */
356 head
= i40e_get_head(tx_ring
);
357 /* Read interrupt register */
358 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
)
360 I40E_PFINT_DYN_CTLN(tx_ring
->q_vector
->v_idx
+
361 tx_ring
->vsi
->base_vector
- 1));
363 val
= rd32(&pf
->hw
, I40E_PFINT_DYN_CTL0
);
365 netdev_info(netdev
, "tx_timeout: VSI_seid: %d, Q %d, NTC: 0x%x, HWB: 0x%x, NTU: 0x%x, TAIL: 0x%x, INT: 0x%x\n",
366 vsi
->seid
, hung_queue
, tx_ring
->next_to_clean
,
367 head
, tx_ring
->next_to_use
,
368 readl(tx_ring
->tail
), val
);
371 pf
->tx_timeout_last_recovery
= jiffies
;
372 netdev_info(netdev
, "tx_timeout recovery level %d, hung_queue %d\n",
373 pf
->tx_timeout_recovery_level
, hung_queue
);
375 switch (pf
->tx_timeout_recovery_level
) {
377 set_bit(__I40E_PF_RESET_REQUESTED
, &pf
->state
);
380 set_bit(__I40E_CORE_RESET_REQUESTED
, &pf
->state
);
383 set_bit(__I40E_GLOBAL_RESET_REQUESTED
, &pf
->state
);
386 netdev_err(netdev
, "tx_timeout recovery unsuccessful\n");
390 i40e_service_event_schedule(pf
);
391 pf
->tx_timeout_recovery_level
++;
395 * i40e_get_vsi_stats_struct - Get System Network Statistics
396 * @vsi: the VSI we care about
398 * Returns the address of the device statistics structure.
399 * The statistics are actually updated from the service task.
401 struct rtnl_link_stats64
*i40e_get_vsi_stats_struct(struct i40e_vsi
*vsi
)
403 return &vsi
->net_stats
;
407 * i40e_get_netdev_stats_struct - Get statistics for netdev interface
408 * @netdev: network interface device structure
410 * Returns the address of the device statistics structure.
411 * The statistics are actually updated from the service task.
414 struct rtnl_link_stats64
*i40e_get_netdev_stats_struct(
415 struct net_device
*netdev
,
416 struct rtnl_link_stats64
*stats
)
418 static struct rtnl_link_stats64
*i40e_get_netdev_stats_struct(
419 struct net_device
*netdev
,
420 struct rtnl_link_stats64
*stats
)
423 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
424 struct i40e_ring
*tx_ring
, *rx_ring
;
425 struct i40e_vsi
*vsi
= np
->vsi
;
426 struct rtnl_link_stats64
*vsi_stats
= i40e_get_vsi_stats_struct(vsi
);
429 if (test_bit(__I40E_DOWN
, &vsi
->state
))
436 for (i
= 0; i
< vsi
->num_queue_pairs
; i
++) {
440 tx_ring
= ACCESS_ONCE(vsi
->tx_rings
[i
]);
445 start
= u64_stats_fetch_begin_irq(&tx_ring
->syncp
);
446 packets
= tx_ring
->stats
.packets
;
447 bytes
= tx_ring
->stats
.bytes
;
448 } while (u64_stats_fetch_retry_irq(&tx_ring
->syncp
, start
));
450 stats
->tx_packets
+= packets
;
451 stats
->tx_bytes
+= bytes
;
452 rx_ring
= &tx_ring
[1];
455 start
= u64_stats_fetch_begin_irq(&rx_ring
->syncp
);
456 packets
= rx_ring
->stats
.packets
;
457 bytes
= rx_ring
->stats
.bytes
;
458 } while (u64_stats_fetch_retry_irq(&rx_ring
->syncp
, start
));
460 stats
->rx_packets
+= packets
;
461 stats
->rx_bytes
+= bytes
;
465 /* following stats updated by i40e_watchdog_subtask() */
466 stats
->multicast
= vsi_stats
->multicast
;
467 stats
->tx_errors
= vsi_stats
->tx_errors
;
468 stats
->tx_dropped
= vsi_stats
->tx_dropped
;
469 stats
->rx_errors
= vsi_stats
->rx_errors
;
470 stats
->rx_dropped
= vsi_stats
->rx_dropped
;
471 stats
->rx_crc_errors
= vsi_stats
->rx_crc_errors
;
472 stats
->rx_length_errors
= vsi_stats
->rx_length_errors
;
478 * i40e_vsi_reset_stats - Resets all stats of the given vsi
479 * @vsi: the VSI to have its stats reset
481 void i40e_vsi_reset_stats(struct i40e_vsi
*vsi
)
483 struct rtnl_link_stats64
*ns
;
489 ns
= i40e_get_vsi_stats_struct(vsi
);
490 memset(ns
, 0, sizeof(*ns
));
491 memset(&vsi
->net_stats_offsets
, 0, sizeof(vsi
->net_stats_offsets
));
492 memset(&vsi
->eth_stats
, 0, sizeof(vsi
->eth_stats
));
493 memset(&vsi
->eth_stats_offsets
, 0, sizeof(vsi
->eth_stats_offsets
));
494 if (vsi
->rx_rings
&& vsi
->rx_rings
[0]) {
495 for (i
= 0; i
< vsi
->num_queue_pairs
; i
++) {
496 memset(&vsi
->rx_rings
[i
]->stats
, 0,
497 sizeof(vsi
->rx_rings
[i
]->stats
));
498 memset(&vsi
->rx_rings
[i
]->rx_stats
, 0,
499 sizeof(vsi
->rx_rings
[i
]->rx_stats
));
500 memset(&vsi
->tx_rings
[i
]->stats
, 0,
501 sizeof(vsi
->tx_rings
[i
]->stats
));
502 memset(&vsi
->tx_rings
[i
]->tx_stats
, 0,
503 sizeof(vsi
->tx_rings
[i
]->tx_stats
));
506 vsi
->stat_offsets_loaded
= false;
510 * i40e_pf_reset_stats - Reset all of the stats for the given PF
511 * @pf: the PF to be reset
513 void i40e_pf_reset_stats(struct i40e_pf
*pf
)
517 memset(&pf
->stats
, 0, sizeof(pf
->stats
));
518 memset(&pf
->stats_offsets
, 0, sizeof(pf
->stats_offsets
));
519 pf
->stat_offsets_loaded
= false;
521 for (i
= 0; i
< I40E_MAX_VEB
; i
++) {
523 memset(&pf
->veb
[i
]->stats
, 0,
524 sizeof(pf
->veb
[i
]->stats
));
525 memset(&pf
->veb
[i
]->stats_offsets
, 0,
526 sizeof(pf
->veb
[i
]->stats_offsets
));
527 pf
->veb
[i
]->stat_offsets_loaded
= false;
530 pf
->hw_csum_rx_error
= 0;
534 * i40e_stat_update48 - read and update a 48 bit stat from the chip
535 * @hw: ptr to the hardware info
536 * @hireg: the high 32 bit reg to read
537 * @loreg: the low 32 bit reg to read
538 * @offset_loaded: has the initial offset been loaded yet
539 * @offset: ptr to current offset value
540 * @stat: ptr to the stat
542 * Since the device stats are not reset at PFReset, they likely will not
543 * be zeroed when the driver starts. We'll save the first values read
544 * and use them as offsets to be subtracted from the raw values in order
545 * to report stats that count from zero. In the process, we also manage
546 * the potential roll-over.
548 static void i40e_stat_update48(struct i40e_hw
*hw
, u32 hireg
, u32 loreg
,
549 bool offset_loaded
, u64
*offset
, u64
*stat
)
553 if (hw
->device_id
== I40E_DEV_ID_QEMU
) {
554 new_data
= rd32(hw
, loreg
);
555 new_data
|= ((u64
)(rd32(hw
, hireg
) & 0xFFFF)) << 32;
557 new_data
= rd64(hw
, loreg
);
561 if (likely(new_data
>= *offset
))
562 *stat
= new_data
- *offset
;
564 *stat
= (new_data
+ BIT_ULL(48)) - *offset
;
565 *stat
&= 0xFFFFFFFFFFFFULL
;
569 * i40e_stat_update32 - read and update a 32 bit stat from the chip
570 * @hw: ptr to the hardware info
571 * @reg: the hw reg to read
572 * @offset_loaded: has the initial offset been loaded yet
573 * @offset: ptr to current offset value
574 * @stat: ptr to the stat
576 static void i40e_stat_update32(struct i40e_hw
*hw
, u32 reg
,
577 bool offset_loaded
, u64
*offset
, u64
*stat
)
581 new_data
= rd32(hw
, reg
);
584 if (likely(new_data
>= *offset
))
585 *stat
= (u32
)(new_data
- *offset
);
587 *stat
= (u32
)((new_data
+ BIT_ULL(32)) - *offset
);
591 * i40e_update_eth_stats - Update VSI-specific ethernet statistics counters.
592 * @vsi: the VSI to be updated
594 void i40e_update_eth_stats(struct i40e_vsi
*vsi
)
596 int stat_idx
= le16_to_cpu(vsi
->info
.stat_counter_idx
);
597 struct i40e_pf
*pf
= vsi
->back
;
598 struct i40e_hw
*hw
= &pf
->hw
;
599 struct i40e_eth_stats
*oes
;
600 struct i40e_eth_stats
*es
; /* device's eth stats */
602 es
= &vsi
->eth_stats
;
603 oes
= &vsi
->eth_stats_offsets
;
605 /* Gather up the stats that the hw collects */
606 i40e_stat_update32(hw
, I40E_GLV_TEPC(stat_idx
),
607 vsi
->stat_offsets_loaded
,
608 &oes
->tx_errors
, &es
->tx_errors
);
609 i40e_stat_update32(hw
, I40E_GLV_RDPC(stat_idx
),
610 vsi
->stat_offsets_loaded
,
611 &oes
->rx_discards
, &es
->rx_discards
);
612 i40e_stat_update32(hw
, I40E_GLV_RUPP(stat_idx
),
613 vsi
->stat_offsets_loaded
,
614 &oes
->rx_unknown_protocol
, &es
->rx_unknown_protocol
);
615 i40e_stat_update32(hw
, I40E_GLV_TEPC(stat_idx
),
616 vsi
->stat_offsets_loaded
,
617 &oes
->tx_errors
, &es
->tx_errors
);
619 i40e_stat_update48(hw
, I40E_GLV_GORCH(stat_idx
),
620 I40E_GLV_GORCL(stat_idx
),
621 vsi
->stat_offsets_loaded
,
622 &oes
->rx_bytes
, &es
->rx_bytes
);
623 i40e_stat_update48(hw
, I40E_GLV_UPRCH(stat_idx
),
624 I40E_GLV_UPRCL(stat_idx
),
625 vsi
->stat_offsets_loaded
,
626 &oes
->rx_unicast
, &es
->rx_unicast
);
627 i40e_stat_update48(hw
, I40E_GLV_MPRCH(stat_idx
),
628 I40E_GLV_MPRCL(stat_idx
),
629 vsi
->stat_offsets_loaded
,
630 &oes
->rx_multicast
, &es
->rx_multicast
);
631 i40e_stat_update48(hw
, I40E_GLV_BPRCH(stat_idx
),
632 I40E_GLV_BPRCL(stat_idx
),
633 vsi
->stat_offsets_loaded
,
634 &oes
->rx_broadcast
, &es
->rx_broadcast
);
636 i40e_stat_update48(hw
, I40E_GLV_GOTCH(stat_idx
),
637 I40E_GLV_GOTCL(stat_idx
),
638 vsi
->stat_offsets_loaded
,
639 &oes
->tx_bytes
, &es
->tx_bytes
);
640 i40e_stat_update48(hw
, I40E_GLV_UPTCH(stat_idx
),
641 I40E_GLV_UPTCL(stat_idx
),
642 vsi
->stat_offsets_loaded
,
643 &oes
->tx_unicast
, &es
->tx_unicast
);
644 i40e_stat_update48(hw
, I40E_GLV_MPTCH(stat_idx
),
645 I40E_GLV_MPTCL(stat_idx
),
646 vsi
->stat_offsets_loaded
,
647 &oes
->tx_multicast
, &es
->tx_multicast
);
648 i40e_stat_update48(hw
, I40E_GLV_BPTCH(stat_idx
),
649 I40E_GLV_BPTCL(stat_idx
),
650 vsi
->stat_offsets_loaded
,
651 &oes
->tx_broadcast
, &es
->tx_broadcast
);
652 vsi
->stat_offsets_loaded
= true;
656 * i40e_update_veb_stats - Update Switch component statistics
657 * @veb: the VEB being updated
659 static void i40e_update_veb_stats(struct i40e_veb
*veb
)
661 struct i40e_pf
*pf
= veb
->pf
;
662 struct i40e_hw
*hw
= &pf
->hw
;
663 struct i40e_eth_stats
*oes
;
664 struct i40e_eth_stats
*es
; /* device's eth stats */
665 struct i40e_veb_tc_stats
*veb_oes
;
666 struct i40e_veb_tc_stats
*veb_es
;
669 idx
= veb
->stats_idx
;
671 oes
= &veb
->stats_offsets
;
672 veb_es
= &veb
->tc_stats
;
673 veb_oes
= &veb
->tc_stats_offsets
;
675 /* Gather up the stats that the hw collects */
676 i40e_stat_update32(hw
, I40E_GLSW_TDPC(idx
),
677 veb
->stat_offsets_loaded
,
678 &oes
->tx_discards
, &es
->tx_discards
);
679 if (hw
->revision_id
> 0)
680 i40e_stat_update32(hw
, I40E_GLSW_RUPP(idx
),
681 veb
->stat_offsets_loaded
,
682 &oes
->rx_unknown_protocol
,
683 &es
->rx_unknown_protocol
);
684 i40e_stat_update48(hw
, I40E_GLSW_GORCH(idx
), I40E_GLSW_GORCL(idx
),
685 veb
->stat_offsets_loaded
,
686 &oes
->rx_bytes
, &es
->rx_bytes
);
687 i40e_stat_update48(hw
, I40E_GLSW_UPRCH(idx
), I40E_GLSW_UPRCL(idx
),
688 veb
->stat_offsets_loaded
,
689 &oes
->rx_unicast
, &es
->rx_unicast
);
690 i40e_stat_update48(hw
, I40E_GLSW_MPRCH(idx
), I40E_GLSW_MPRCL(idx
),
691 veb
->stat_offsets_loaded
,
692 &oes
->rx_multicast
, &es
->rx_multicast
);
693 i40e_stat_update48(hw
, I40E_GLSW_BPRCH(idx
), I40E_GLSW_BPRCL(idx
),
694 veb
->stat_offsets_loaded
,
695 &oes
->rx_broadcast
, &es
->rx_broadcast
);
697 i40e_stat_update48(hw
, I40E_GLSW_GOTCH(idx
), I40E_GLSW_GOTCL(idx
),
698 veb
->stat_offsets_loaded
,
699 &oes
->tx_bytes
, &es
->tx_bytes
);
700 i40e_stat_update48(hw
, I40E_GLSW_UPTCH(idx
), I40E_GLSW_UPTCL(idx
),
701 veb
->stat_offsets_loaded
,
702 &oes
->tx_unicast
, &es
->tx_unicast
);
703 i40e_stat_update48(hw
, I40E_GLSW_MPTCH(idx
), I40E_GLSW_MPTCL(idx
),
704 veb
->stat_offsets_loaded
,
705 &oes
->tx_multicast
, &es
->tx_multicast
);
706 i40e_stat_update48(hw
, I40E_GLSW_BPTCH(idx
), I40E_GLSW_BPTCL(idx
),
707 veb
->stat_offsets_loaded
,
708 &oes
->tx_broadcast
, &es
->tx_broadcast
);
709 for (i
= 0; i
< I40E_MAX_TRAFFIC_CLASS
; i
++) {
710 i40e_stat_update48(hw
, I40E_GLVEBTC_RPCH(i
, idx
),
711 I40E_GLVEBTC_RPCL(i
, idx
),
712 veb
->stat_offsets_loaded
,
713 &veb_oes
->tc_rx_packets
[i
],
714 &veb_es
->tc_rx_packets
[i
]);
715 i40e_stat_update48(hw
, I40E_GLVEBTC_RBCH(i
, idx
),
716 I40E_GLVEBTC_RBCL(i
, idx
),
717 veb
->stat_offsets_loaded
,
718 &veb_oes
->tc_rx_bytes
[i
],
719 &veb_es
->tc_rx_bytes
[i
]);
720 i40e_stat_update48(hw
, I40E_GLVEBTC_TPCH(i
, idx
),
721 I40E_GLVEBTC_TPCL(i
, idx
),
722 veb
->stat_offsets_loaded
,
723 &veb_oes
->tc_tx_packets
[i
],
724 &veb_es
->tc_tx_packets
[i
]);
725 i40e_stat_update48(hw
, I40E_GLVEBTC_TBCH(i
, idx
),
726 I40E_GLVEBTC_TBCL(i
, idx
),
727 veb
->stat_offsets_loaded
,
728 &veb_oes
->tc_tx_bytes
[i
],
729 &veb_es
->tc_tx_bytes
[i
]);
731 veb
->stat_offsets_loaded
= true;
736 * i40e_update_fcoe_stats - Update FCoE-specific ethernet statistics counters.
737 * @vsi: the VSI that is capable of doing FCoE
739 static void i40e_update_fcoe_stats(struct i40e_vsi
*vsi
)
741 struct i40e_pf
*pf
= vsi
->back
;
742 struct i40e_hw
*hw
= &pf
->hw
;
743 struct i40e_fcoe_stats
*ofs
;
744 struct i40e_fcoe_stats
*fs
; /* device's eth stats */
747 if (vsi
->type
!= I40E_VSI_FCOE
)
750 idx
= hw
->pf_id
+ I40E_FCOE_PF_STAT_OFFSET
;
751 fs
= &vsi
->fcoe_stats
;
752 ofs
= &vsi
->fcoe_stats_offsets
;
754 i40e_stat_update32(hw
, I40E_GL_FCOEPRC(idx
),
755 vsi
->fcoe_stat_offsets_loaded
,
756 &ofs
->rx_fcoe_packets
, &fs
->rx_fcoe_packets
);
757 i40e_stat_update48(hw
, I40E_GL_FCOEDWRCH(idx
), I40E_GL_FCOEDWRCL(idx
),
758 vsi
->fcoe_stat_offsets_loaded
,
759 &ofs
->rx_fcoe_dwords
, &fs
->rx_fcoe_dwords
);
760 i40e_stat_update32(hw
, I40E_GL_FCOERPDC(idx
),
761 vsi
->fcoe_stat_offsets_loaded
,
762 &ofs
->rx_fcoe_dropped
, &fs
->rx_fcoe_dropped
);
763 i40e_stat_update32(hw
, I40E_GL_FCOEPTC(idx
),
764 vsi
->fcoe_stat_offsets_loaded
,
765 &ofs
->tx_fcoe_packets
, &fs
->tx_fcoe_packets
);
766 i40e_stat_update48(hw
, I40E_GL_FCOEDWTCH(idx
), I40E_GL_FCOEDWTCL(idx
),
767 vsi
->fcoe_stat_offsets_loaded
,
768 &ofs
->tx_fcoe_dwords
, &fs
->tx_fcoe_dwords
);
769 i40e_stat_update32(hw
, I40E_GL_FCOECRC(idx
),
770 vsi
->fcoe_stat_offsets_loaded
,
771 &ofs
->fcoe_bad_fccrc
, &fs
->fcoe_bad_fccrc
);
772 i40e_stat_update32(hw
, I40E_GL_FCOELAST(idx
),
773 vsi
->fcoe_stat_offsets_loaded
,
774 &ofs
->fcoe_last_error
, &fs
->fcoe_last_error
);
775 i40e_stat_update32(hw
, I40E_GL_FCOEDDPC(idx
),
776 vsi
->fcoe_stat_offsets_loaded
,
777 &ofs
->fcoe_ddp_count
, &fs
->fcoe_ddp_count
);
779 vsi
->fcoe_stat_offsets_loaded
= true;
784 * i40e_update_vsi_stats - Update the vsi statistics counters.
785 * @vsi: the VSI to be updated
787 * There are a few instances where we store the same stat in a
788 * couple of different structs. This is partly because we have
789 * the netdev stats that need to be filled out, which is slightly
790 * different from the "eth_stats" defined by the chip and used in
791 * VF communications. We sort it out here.
793 static void i40e_update_vsi_stats(struct i40e_vsi
*vsi
)
795 struct i40e_pf
*pf
= vsi
->back
;
796 struct rtnl_link_stats64
*ons
;
797 struct rtnl_link_stats64
*ns
; /* netdev stats */
798 struct i40e_eth_stats
*oes
;
799 struct i40e_eth_stats
*es
; /* device's eth stats */
800 u32 tx_restart
, tx_busy
;
801 u64 tx_lost_interrupt
;
812 if (test_bit(__I40E_DOWN
, &vsi
->state
) ||
813 test_bit(__I40E_CONFIG_BUSY
, &pf
->state
))
816 ns
= i40e_get_vsi_stats_struct(vsi
);
817 ons
= &vsi
->net_stats_offsets
;
818 es
= &vsi
->eth_stats
;
819 oes
= &vsi
->eth_stats_offsets
;
821 /* Gather up the netdev and vsi stats that the driver collects
822 * on the fly during packet processing
826 tx_restart
= tx_busy
= tx_linearize
= tx_force_wb
= 0;
827 tx_lost_interrupt
= 0;
831 for (q
= 0; q
< vsi
->num_queue_pairs
; q
++) {
833 p
= ACCESS_ONCE(vsi
->tx_rings
[q
]);
836 start
= u64_stats_fetch_begin_irq(&p
->syncp
);
837 packets
= p
->stats
.packets
;
838 bytes
= p
->stats
.bytes
;
839 } while (u64_stats_fetch_retry_irq(&p
->syncp
, start
));
842 tx_restart
+= p
->tx_stats
.restart_queue
;
843 tx_busy
+= p
->tx_stats
.tx_busy
;
844 tx_linearize
+= p
->tx_stats
.tx_linearize
;
845 tx_force_wb
+= p
->tx_stats
.tx_force_wb
;
846 tx_lost_interrupt
+= p
->tx_stats
.tx_lost_interrupt
;
848 /* Rx queue is part of the same block as Tx queue */
851 start
= u64_stats_fetch_begin_irq(&p
->syncp
);
852 packets
= p
->stats
.packets
;
853 bytes
= p
->stats
.bytes
;
854 } while (u64_stats_fetch_retry_irq(&p
->syncp
, start
));
857 rx_buf
+= p
->rx_stats
.alloc_buff_failed
;
858 rx_page
+= p
->rx_stats
.alloc_page_failed
;
861 vsi
->tx_restart
= tx_restart
;
862 vsi
->tx_busy
= tx_busy
;
863 vsi
->tx_linearize
= tx_linearize
;
864 vsi
->tx_force_wb
= tx_force_wb
;
865 vsi
->tx_lost_interrupt
= tx_lost_interrupt
;
866 vsi
->rx_page_failed
= rx_page
;
867 vsi
->rx_buf_failed
= rx_buf
;
869 ns
->rx_packets
= rx_p
;
871 ns
->tx_packets
= tx_p
;
874 /* update netdev stats from eth stats */
875 i40e_update_eth_stats(vsi
);
876 ons
->tx_errors
= oes
->tx_errors
;
877 ns
->tx_errors
= es
->tx_errors
;
878 ons
->multicast
= oes
->rx_multicast
;
879 ns
->multicast
= es
->rx_multicast
;
880 ons
->rx_dropped
= oes
->rx_discards
;
881 ns
->rx_dropped
= es
->rx_discards
;
882 ons
->tx_dropped
= oes
->tx_discards
;
883 ns
->tx_dropped
= es
->tx_discards
;
885 /* pull in a couple PF stats if this is the main vsi */
886 if (vsi
== pf
->vsi
[pf
->lan_vsi
]) {
887 ns
->rx_crc_errors
= pf
->stats
.crc_errors
;
888 ns
->rx_errors
= pf
->stats
.crc_errors
+ pf
->stats
.illegal_bytes
;
889 ns
->rx_length_errors
= pf
->stats
.rx_length_errors
;
894 * i40e_update_pf_stats - Update the PF statistics counters.
895 * @pf: the PF to be updated
897 static void i40e_update_pf_stats(struct i40e_pf
*pf
)
899 struct i40e_hw_port_stats
*osd
= &pf
->stats_offsets
;
900 struct i40e_hw_port_stats
*nsd
= &pf
->stats
;
901 struct i40e_hw
*hw
= &pf
->hw
;
905 i40e_stat_update48(hw
, I40E_GLPRT_GORCH(hw
->port
),
906 I40E_GLPRT_GORCL(hw
->port
),
907 pf
->stat_offsets_loaded
,
908 &osd
->eth
.rx_bytes
, &nsd
->eth
.rx_bytes
);
909 i40e_stat_update48(hw
, I40E_GLPRT_GOTCH(hw
->port
),
910 I40E_GLPRT_GOTCL(hw
->port
),
911 pf
->stat_offsets_loaded
,
912 &osd
->eth
.tx_bytes
, &nsd
->eth
.tx_bytes
);
913 i40e_stat_update32(hw
, I40E_GLPRT_RDPC(hw
->port
),
914 pf
->stat_offsets_loaded
,
915 &osd
->eth
.rx_discards
,
916 &nsd
->eth
.rx_discards
);
917 i40e_stat_update48(hw
, I40E_GLPRT_UPRCH(hw
->port
),
918 I40E_GLPRT_UPRCL(hw
->port
),
919 pf
->stat_offsets_loaded
,
920 &osd
->eth
.rx_unicast
,
921 &nsd
->eth
.rx_unicast
);
922 i40e_stat_update48(hw
, I40E_GLPRT_MPRCH(hw
->port
),
923 I40E_GLPRT_MPRCL(hw
->port
),
924 pf
->stat_offsets_loaded
,
925 &osd
->eth
.rx_multicast
,
926 &nsd
->eth
.rx_multicast
);
927 i40e_stat_update48(hw
, I40E_GLPRT_BPRCH(hw
->port
),
928 I40E_GLPRT_BPRCL(hw
->port
),
929 pf
->stat_offsets_loaded
,
930 &osd
->eth
.rx_broadcast
,
931 &nsd
->eth
.rx_broadcast
);
932 i40e_stat_update48(hw
, I40E_GLPRT_UPTCH(hw
->port
),
933 I40E_GLPRT_UPTCL(hw
->port
),
934 pf
->stat_offsets_loaded
,
935 &osd
->eth
.tx_unicast
,
936 &nsd
->eth
.tx_unicast
);
937 i40e_stat_update48(hw
, I40E_GLPRT_MPTCH(hw
->port
),
938 I40E_GLPRT_MPTCL(hw
->port
),
939 pf
->stat_offsets_loaded
,
940 &osd
->eth
.tx_multicast
,
941 &nsd
->eth
.tx_multicast
);
942 i40e_stat_update48(hw
, I40E_GLPRT_BPTCH(hw
->port
),
943 I40E_GLPRT_BPTCL(hw
->port
),
944 pf
->stat_offsets_loaded
,
945 &osd
->eth
.tx_broadcast
,
946 &nsd
->eth
.tx_broadcast
);
948 i40e_stat_update32(hw
, I40E_GLPRT_TDOLD(hw
->port
),
949 pf
->stat_offsets_loaded
,
950 &osd
->tx_dropped_link_down
,
951 &nsd
->tx_dropped_link_down
);
953 i40e_stat_update32(hw
, I40E_GLPRT_CRCERRS(hw
->port
),
954 pf
->stat_offsets_loaded
,
955 &osd
->crc_errors
, &nsd
->crc_errors
);
957 i40e_stat_update32(hw
, I40E_GLPRT_ILLERRC(hw
->port
),
958 pf
->stat_offsets_loaded
,
959 &osd
->illegal_bytes
, &nsd
->illegal_bytes
);
961 i40e_stat_update32(hw
, I40E_GLPRT_MLFC(hw
->port
),
962 pf
->stat_offsets_loaded
,
963 &osd
->mac_local_faults
,
964 &nsd
->mac_local_faults
);
965 i40e_stat_update32(hw
, I40E_GLPRT_MRFC(hw
->port
),
966 pf
->stat_offsets_loaded
,
967 &osd
->mac_remote_faults
,
968 &nsd
->mac_remote_faults
);
970 i40e_stat_update32(hw
, I40E_GLPRT_RLEC(hw
->port
),
971 pf
->stat_offsets_loaded
,
972 &osd
->rx_length_errors
,
973 &nsd
->rx_length_errors
);
975 i40e_stat_update32(hw
, I40E_GLPRT_LXONRXC(hw
->port
),
976 pf
->stat_offsets_loaded
,
977 &osd
->link_xon_rx
, &nsd
->link_xon_rx
);
978 i40e_stat_update32(hw
, I40E_GLPRT_LXONTXC(hw
->port
),
979 pf
->stat_offsets_loaded
,
980 &osd
->link_xon_tx
, &nsd
->link_xon_tx
);
981 i40e_stat_update32(hw
, I40E_GLPRT_LXOFFRXC(hw
->port
),
982 pf
->stat_offsets_loaded
,
983 &osd
->link_xoff_rx
, &nsd
->link_xoff_rx
);
984 i40e_stat_update32(hw
, I40E_GLPRT_LXOFFTXC(hw
->port
),
985 pf
->stat_offsets_loaded
,
986 &osd
->link_xoff_tx
, &nsd
->link_xoff_tx
);
988 for (i
= 0; i
< 8; i
++) {
989 i40e_stat_update32(hw
, I40E_GLPRT_PXOFFRXC(hw
->port
, i
),
990 pf
->stat_offsets_loaded
,
991 &osd
->priority_xoff_rx
[i
],
992 &nsd
->priority_xoff_rx
[i
]);
993 i40e_stat_update32(hw
, I40E_GLPRT_PXONRXC(hw
->port
, i
),
994 pf
->stat_offsets_loaded
,
995 &osd
->priority_xon_rx
[i
],
996 &nsd
->priority_xon_rx
[i
]);
997 i40e_stat_update32(hw
, I40E_GLPRT_PXONTXC(hw
->port
, i
),
998 pf
->stat_offsets_loaded
,
999 &osd
->priority_xon_tx
[i
],
1000 &nsd
->priority_xon_tx
[i
]);
1001 i40e_stat_update32(hw
, I40E_GLPRT_PXOFFTXC(hw
->port
, i
),
1002 pf
->stat_offsets_loaded
,
1003 &osd
->priority_xoff_tx
[i
],
1004 &nsd
->priority_xoff_tx
[i
]);
1005 i40e_stat_update32(hw
,
1006 I40E_GLPRT_RXON2OFFCNT(hw
->port
, i
),
1007 pf
->stat_offsets_loaded
,
1008 &osd
->priority_xon_2_xoff
[i
],
1009 &nsd
->priority_xon_2_xoff
[i
]);
1012 i40e_stat_update48(hw
, I40E_GLPRT_PRC64H(hw
->port
),
1013 I40E_GLPRT_PRC64L(hw
->port
),
1014 pf
->stat_offsets_loaded
,
1015 &osd
->rx_size_64
, &nsd
->rx_size_64
);
1016 i40e_stat_update48(hw
, I40E_GLPRT_PRC127H(hw
->port
),
1017 I40E_GLPRT_PRC127L(hw
->port
),
1018 pf
->stat_offsets_loaded
,
1019 &osd
->rx_size_127
, &nsd
->rx_size_127
);
1020 i40e_stat_update48(hw
, I40E_GLPRT_PRC255H(hw
->port
),
1021 I40E_GLPRT_PRC255L(hw
->port
),
1022 pf
->stat_offsets_loaded
,
1023 &osd
->rx_size_255
, &nsd
->rx_size_255
);
1024 i40e_stat_update48(hw
, I40E_GLPRT_PRC511H(hw
->port
),
1025 I40E_GLPRT_PRC511L(hw
->port
),
1026 pf
->stat_offsets_loaded
,
1027 &osd
->rx_size_511
, &nsd
->rx_size_511
);
1028 i40e_stat_update48(hw
, I40E_GLPRT_PRC1023H(hw
->port
),
1029 I40E_GLPRT_PRC1023L(hw
->port
),
1030 pf
->stat_offsets_loaded
,
1031 &osd
->rx_size_1023
, &nsd
->rx_size_1023
);
1032 i40e_stat_update48(hw
, I40E_GLPRT_PRC1522H(hw
->port
),
1033 I40E_GLPRT_PRC1522L(hw
->port
),
1034 pf
->stat_offsets_loaded
,
1035 &osd
->rx_size_1522
, &nsd
->rx_size_1522
);
1036 i40e_stat_update48(hw
, I40E_GLPRT_PRC9522H(hw
->port
),
1037 I40E_GLPRT_PRC9522L(hw
->port
),
1038 pf
->stat_offsets_loaded
,
1039 &osd
->rx_size_big
, &nsd
->rx_size_big
);
1041 i40e_stat_update48(hw
, I40E_GLPRT_PTC64H(hw
->port
),
1042 I40E_GLPRT_PTC64L(hw
->port
),
1043 pf
->stat_offsets_loaded
,
1044 &osd
->tx_size_64
, &nsd
->tx_size_64
);
1045 i40e_stat_update48(hw
, I40E_GLPRT_PTC127H(hw
->port
),
1046 I40E_GLPRT_PTC127L(hw
->port
),
1047 pf
->stat_offsets_loaded
,
1048 &osd
->tx_size_127
, &nsd
->tx_size_127
);
1049 i40e_stat_update48(hw
, I40E_GLPRT_PTC255H(hw
->port
),
1050 I40E_GLPRT_PTC255L(hw
->port
),
1051 pf
->stat_offsets_loaded
,
1052 &osd
->tx_size_255
, &nsd
->tx_size_255
);
1053 i40e_stat_update48(hw
, I40E_GLPRT_PTC511H(hw
->port
),
1054 I40E_GLPRT_PTC511L(hw
->port
),
1055 pf
->stat_offsets_loaded
,
1056 &osd
->tx_size_511
, &nsd
->tx_size_511
);
1057 i40e_stat_update48(hw
, I40E_GLPRT_PTC1023H(hw
->port
),
1058 I40E_GLPRT_PTC1023L(hw
->port
),
1059 pf
->stat_offsets_loaded
,
1060 &osd
->tx_size_1023
, &nsd
->tx_size_1023
);
1061 i40e_stat_update48(hw
, I40E_GLPRT_PTC1522H(hw
->port
),
1062 I40E_GLPRT_PTC1522L(hw
->port
),
1063 pf
->stat_offsets_loaded
,
1064 &osd
->tx_size_1522
, &nsd
->tx_size_1522
);
1065 i40e_stat_update48(hw
, I40E_GLPRT_PTC9522H(hw
->port
),
1066 I40E_GLPRT_PTC9522L(hw
->port
),
1067 pf
->stat_offsets_loaded
,
1068 &osd
->tx_size_big
, &nsd
->tx_size_big
);
1070 i40e_stat_update32(hw
, I40E_GLPRT_RUC(hw
->port
),
1071 pf
->stat_offsets_loaded
,
1072 &osd
->rx_undersize
, &nsd
->rx_undersize
);
1073 i40e_stat_update32(hw
, I40E_GLPRT_RFC(hw
->port
),
1074 pf
->stat_offsets_loaded
,
1075 &osd
->rx_fragments
, &nsd
->rx_fragments
);
1076 i40e_stat_update32(hw
, I40E_GLPRT_ROC(hw
->port
),
1077 pf
->stat_offsets_loaded
,
1078 &osd
->rx_oversize
, &nsd
->rx_oversize
);
1079 i40e_stat_update32(hw
, I40E_GLPRT_RJC(hw
->port
),
1080 pf
->stat_offsets_loaded
,
1081 &osd
->rx_jabber
, &nsd
->rx_jabber
);
1084 i40e_stat_update32(hw
,
1085 I40E_GLQF_PCNT(I40E_FD_ATR_STAT_IDX(pf
->hw
.pf_id
)),
1086 pf
->stat_offsets_loaded
,
1087 &osd
->fd_atr_match
, &nsd
->fd_atr_match
);
1088 i40e_stat_update32(hw
,
1089 I40E_GLQF_PCNT(I40E_FD_SB_STAT_IDX(pf
->hw
.pf_id
)),
1090 pf
->stat_offsets_loaded
,
1091 &osd
->fd_sb_match
, &nsd
->fd_sb_match
);
1092 i40e_stat_update32(hw
,
1093 I40E_GLQF_PCNT(I40E_FD_ATR_TUNNEL_STAT_IDX(pf
->hw
.pf_id
)),
1094 pf
->stat_offsets_loaded
,
1095 &osd
->fd_atr_tunnel_match
, &nsd
->fd_atr_tunnel_match
);
1097 val
= rd32(hw
, I40E_PRTPM_EEE_STAT
);
1098 nsd
->tx_lpi_status
=
1099 (val
& I40E_PRTPM_EEE_STAT_TX_LPI_STATUS_MASK
) >>
1100 I40E_PRTPM_EEE_STAT_TX_LPI_STATUS_SHIFT
;
1101 nsd
->rx_lpi_status
=
1102 (val
& I40E_PRTPM_EEE_STAT_RX_LPI_STATUS_MASK
) >>
1103 I40E_PRTPM_EEE_STAT_RX_LPI_STATUS_SHIFT
;
1104 i40e_stat_update32(hw
, I40E_PRTPM_TLPIC
,
1105 pf
->stat_offsets_loaded
,
1106 &osd
->tx_lpi_count
, &nsd
->tx_lpi_count
);
1107 i40e_stat_update32(hw
, I40E_PRTPM_RLPIC
,
1108 pf
->stat_offsets_loaded
,
1109 &osd
->rx_lpi_count
, &nsd
->rx_lpi_count
);
1111 if (pf
->flags
& I40E_FLAG_FD_SB_ENABLED
&&
1112 !(pf
->auto_disable_flags
& I40E_FLAG_FD_SB_ENABLED
))
1113 nsd
->fd_sb_status
= true;
1115 nsd
->fd_sb_status
= false;
1117 if (pf
->flags
& I40E_FLAG_FD_ATR_ENABLED
&&
1118 !(pf
->auto_disable_flags
& I40E_FLAG_FD_ATR_ENABLED
))
1119 nsd
->fd_atr_status
= true;
1121 nsd
->fd_atr_status
= false;
1123 pf
->stat_offsets_loaded
= true;
1127 * i40e_update_stats - Update the various statistics counters.
1128 * @vsi: the VSI to be updated
1130 * Update the various stats for this VSI and its related entities.
1132 void i40e_update_stats(struct i40e_vsi
*vsi
)
1134 struct i40e_pf
*pf
= vsi
->back
;
1136 if (vsi
== pf
->vsi
[pf
->lan_vsi
])
1137 i40e_update_pf_stats(pf
);
1139 i40e_update_vsi_stats(vsi
);
1141 i40e_update_fcoe_stats(vsi
);
1146 * i40e_find_filter - Search VSI filter list for specific mac/vlan filter
1147 * @vsi: the VSI to be searched
1148 * @macaddr: the MAC address
1150 * @is_vf: make sure its a VF filter, else doesn't matter
1151 * @is_netdev: make sure its a netdev filter, else doesn't matter
1153 * Returns ptr to the filter object or NULL
1155 static struct i40e_mac_filter
*i40e_find_filter(struct i40e_vsi
*vsi
,
1156 u8
*macaddr
, s16 vlan
,
1157 bool is_vf
, bool is_netdev
)
1159 struct i40e_mac_filter
*f
;
1161 if (!vsi
|| !macaddr
)
1164 list_for_each_entry(f
, &vsi
->mac_filter_list
, list
) {
1165 if ((ether_addr_equal(macaddr
, f
->macaddr
)) &&
1166 (vlan
== f
->vlan
) &&
1167 (!is_vf
|| f
->is_vf
) &&
1168 (!is_netdev
|| f
->is_netdev
))
1175 * i40e_find_mac - Find a mac addr in the macvlan filters list
1176 * @vsi: the VSI to be searched
1177 * @macaddr: the MAC address we are searching for
1178 * @is_vf: make sure its a VF filter, else doesn't matter
1179 * @is_netdev: make sure its a netdev filter, else doesn't matter
1181 * Returns the first filter with the provided MAC address or NULL if
1182 * MAC address was not found
1184 struct i40e_mac_filter
*i40e_find_mac(struct i40e_vsi
*vsi
, u8
*macaddr
,
1185 bool is_vf
, bool is_netdev
)
1187 struct i40e_mac_filter
*f
;
1189 if (!vsi
|| !macaddr
)
1192 list_for_each_entry(f
, &vsi
->mac_filter_list
, list
) {
1193 if ((ether_addr_equal(macaddr
, f
->macaddr
)) &&
1194 (!is_vf
|| f
->is_vf
) &&
1195 (!is_netdev
|| f
->is_netdev
))
1202 * i40e_is_vsi_in_vlan - Check if VSI is in vlan mode
1203 * @vsi: the VSI to be searched
1205 * Returns true if VSI is in vlan mode or false otherwise
1207 bool i40e_is_vsi_in_vlan(struct i40e_vsi
*vsi
)
1209 struct i40e_mac_filter
*f
;
1211 /* Only -1 for all the filters denotes not in vlan mode
1212 * so we have to go through all the list in order to make sure
1214 list_for_each_entry(f
, &vsi
->mac_filter_list
, list
) {
1215 if (f
->vlan
>= 0 || vsi
->info
.pvid
)
1223 * i40e_put_mac_in_vlan - Make macvlan filters from macaddrs and vlans
1224 * @vsi: the VSI to be searched
1225 * @macaddr: the mac address to be filtered
1226 * @is_vf: true if it is a VF
1227 * @is_netdev: true if it is a netdev
1229 * Goes through all the macvlan filters and adds a
1230 * macvlan filter for each unique vlan that already exists
1232 * Returns first filter found on success, else NULL
1234 struct i40e_mac_filter
*i40e_put_mac_in_vlan(struct i40e_vsi
*vsi
, u8
*macaddr
,
1235 bool is_vf
, bool is_netdev
)
1237 struct i40e_mac_filter
*f
;
1239 list_for_each_entry(f
, &vsi
->mac_filter_list
, list
) {
1241 f
->vlan
= le16_to_cpu(vsi
->info
.pvid
);
1242 if (!i40e_find_filter(vsi
, macaddr
, f
->vlan
,
1243 is_vf
, is_netdev
)) {
1244 if (!i40e_add_filter(vsi
, macaddr
, f
->vlan
,
1250 return list_first_entry_or_null(&vsi
->mac_filter_list
,
1251 struct i40e_mac_filter
, list
);
1255 * i40e_del_mac_all_vlan - Remove a MAC filter from all VLANS
1256 * @vsi: the VSI to be searched
1257 * @macaddr: the mac address to be removed
1258 * @is_vf: true if it is a VF
1259 * @is_netdev: true if it is a netdev
1261 * Removes a given MAC address from a VSI, regardless of VLAN
1263 * Returns 0 for success, or error
1265 int i40e_del_mac_all_vlan(struct i40e_vsi
*vsi
, u8
*macaddr
,
1266 bool is_vf
, bool is_netdev
)
1268 struct i40e_mac_filter
*f
= NULL
;
1271 WARN(!spin_is_locked(&vsi
->mac_filter_list_lock
),
1272 "Missing mac_filter_list_lock\n");
1273 list_for_each_entry(f
, &vsi
->mac_filter_list
, list
) {
1274 if ((ether_addr_equal(macaddr
, f
->macaddr
)) &&
1275 (is_vf
== f
->is_vf
) &&
1276 (is_netdev
== f
->is_netdev
)) {
1279 if (f
->counter
== 0)
1280 f
->state
= I40E_FILTER_REMOVE
;
1284 vsi
->flags
|= I40E_VSI_FLAG_FILTER_CHANGED
;
1285 vsi
->back
->flags
|= I40E_FLAG_FILTER_SYNC
;
1292 * i40e_rm_default_mac_filter - Remove the default MAC filter set by NVM
1293 * @vsi: the PF Main VSI - inappropriate for any other VSI
1294 * @macaddr: the MAC address
1296 * Remove whatever filter the firmware set up so the driver can manage
1297 * its own filtering intelligently.
1299 static void i40e_rm_default_mac_filter(struct i40e_vsi
*vsi
, u8
*macaddr
)
1301 struct i40e_aqc_remove_macvlan_element_data element
;
1302 struct i40e_pf
*pf
= vsi
->back
;
1304 /* Only appropriate for the PF main VSI */
1305 if (vsi
->type
!= I40E_VSI_MAIN
)
1308 memset(&element
, 0, sizeof(element
));
1309 ether_addr_copy(element
.mac_addr
, macaddr
);
1310 element
.vlan_tag
= 0;
1311 /* Ignore error returns, some firmware does it this way... */
1312 element
.flags
= I40E_AQC_MACVLAN_DEL_PERFECT_MATCH
;
1313 i40e_aq_remove_macvlan(&pf
->hw
, vsi
->seid
, &element
, 1, NULL
);
1315 memset(&element
, 0, sizeof(element
));
1316 ether_addr_copy(element
.mac_addr
, macaddr
);
1317 element
.vlan_tag
= 0;
1318 /* ...and some firmware does it this way. */
1319 element
.flags
= I40E_AQC_MACVLAN_DEL_PERFECT_MATCH
|
1320 I40E_AQC_MACVLAN_ADD_IGNORE_VLAN
;
1321 i40e_aq_remove_macvlan(&pf
->hw
, vsi
->seid
, &element
, 1, NULL
);
1325 * i40e_add_filter - Add a mac/vlan filter to the VSI
1326 * @vsi: the VSI to be searched
1327 * @macaddr: the MAC address
1329 * @is_vf: make sure its a VF filter, else doesn't matter
1330 * @is_netdev: make sure its a netdev filter, else doesn't matter
1332 * Returns ptr to the filter object or NULL when no memory available.
1334 * NOTE: This function is expected to be called with mac_filter_list_lock
1337 struct i40e_mac_filter
*i40e_add_filter(struct i40e_vsi
*vsi
,
1338 u8
*macaddr
, s16 vlan
,
1339 bool is_vf
, bool is_netdev
)
1341 struct i40e_mac_filter
*f
;
1342 int changed
= false;
1344 if (!vsi
|| !macaddr
)
1347 /* Do not allow broadcast filter to be added since broadcast filter
1348 * is added as part of add VSI for any newly created VSI except
1351 if (is_broadcast_ether_addr(macaddr
))
1354 f
= i40e_find_filter(vsi
, macaddr
, vlan
, is_vf
, is_netdev
);
1356 f
= kzalloc(sizeof(*f
), GFP_ATOMIC
);
1358 goto add_filter_out
;
1360 ether_addr_copy(f
->macaddr
, macaddr
);
1362 /* If we're in overflow promisc mode, set the state directly
1363 * to failed, so we don't bother to try sending the filter
1366 if (test_bit(__I40E_FILTER_OVERFLOW_PROMISC
, &vsi
->state
))
1367 f
->state
= I40E_FILTER_FAILED
;
1369 f
->state
= I40E_FILTER_NEW
;
1371 INIT_LIST_HEAD(&f
->list
);
1372 list_add_tail(&f
->list
, &vsi
->mac_filter_list
);
1375 /* increment counter and add a new flag if needed */
1381 } else if (is_netdev
) {
1382 if (!f
->is_netdev
) {
1383 f
->is_netdev
= true;
1391 vsi
->flags
|= I40E_VSI_FLAG_FILTER_CHANGED
;
1392 vsi
->back
->flags
|= I40E_FLAG_FILTER_SYNC
;
1400 * i40e_del_filter - Remove a mac/vlan filter from the VSI
1401 * @vsi: the VSI to be searched
1402 * @macaddr: the MAC address
1404 * @is_vf: make sure it's a VF filter, else doesn't matter
1405 * @is_netdev: make sure it's a netdev filter, else doesn't matter
1407 * NOTE: This function is expected to be called with mac_filter_list_lock
1409 * ANOTHER NOTE: This function MUST be called from within the context of
1410 * the "safe" variants of any list iterators, e.g. list_for_each_entry_safe()
1411 * instead of list_for_each_entry().
1413 void i40e_del_filter(struct i40e_vsi
*vsi
,
1414 u8
*macaddr
, s16 vlan
,
1415 bool is_vf
, bool is_netdev
)
1417 struct i40e_mac_filter
*f
;
1419 if (!vsi
|| !macaddr
)
1422 f
= i40e_find_filter(vsi
, macaddr
, vlan
, is_vf
, is_netdev
);
1423 if (!f
|| f
->counter
== 0)
1431 } else if (is_netdev
) {
1433 f
->is_netdev
= false;
1437 /* make sure we don't remove a filter in use by VF or netdev */
1440 min_f
+= (f
->is_vf
? 1 : 0);
1441 min_f
+= (f
->is_netdev
? 1 : 0);
1443 if (f
->counter
> min_f
)
1447 /* counter == 0 tells sync_filters_subtask to
1448 * remove the filter from the firmware's list
1450 if (f
->counter
== 0) {
1451 if ((f
->state
== I40E_FILTER_FAILED
) ||
1452 (f
->state
== I40E_FILTER_NEW
)) {
1453 /* this one never got added by the FW. Just remove it,
1454 * no need to sync anything.
1459 f
->state
= I40E_FILTER_REMOVE
;
1460 vsi
->flags
|= I40E_VSI_FLAG_FILTER_CHANGED
;
1461 vsi
->back
->flags
|= I40E_FLAG_FILTER_SYNC
;
1467 * i40e_set_mac - NDO callback to set mac address
1468 * @netdev: network interface device structure
1469 * @p: pointer to an address structure
1471 * Returns 0 on success, negative on failure
1474 int i40e_set_mac(struct net_device
*netdev
, void *p
)
1476 static int i40e_set_mac(struct net_device
*netdev
, void *p
)
1479 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
1480 struct i40e_vsi
*vsi
= np
->vsi
;
1481 struct i40e_pf
*pf
= vsi
->back
;
1482 struct i40e_hw
*hw
= &pf
->hw
;
1483 struct sockaddr
*addr
= p
;
1485 if (!is_valid_ether_addr(addr
->sa_data
))
1486 return -EADDRNOTAVAIL
;
1488 if (ether_addr_equal(netdev
->dev_addr
, addr
->sa_data
)) {
1489 netdev_info(netdev
, "already using mac address %pM\n",
1494 if (test_bit(__I40E_DOWN
, &vsi
->back
->state
) ||
1495 test_bit(__I40E_RESET_RECOVERY_PENDING
, &vsi
->back
->state
))
1496 return -EADDRNOTAVAIL
;
1498 if (ether_addr_equal(hw
->mac
.addr
, addr
->sa_data
))
1499 netdev_info(netdev
, "returning to hw mac address %pM\n",
1502 netdev_info(netdev
, "set new mac address %pM\n", addr
->sa_data
);
1504 spin_lock_bh(&vsi
->mac_filter_list_lock
);
1505 i40e_del_mac_all_vlan(vsi
, netdev
->dev_addr
, false, true);
1506 i40e_put_mac_in_vlan(vsi
, addr
->sa_data
, false, true);
1507 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
1508 ether_addr_copy(netdev
->dev_addr
, addr
->sa_data
);
1509 if (vsi
->type
== I40E_VSI_MAIN
) {
1512 ret
= i40e_aq_mac_address_write(&vsi
->back
->hw
,
1513 I40E_AQC_WRITE_TYPE_LAA_WOL
,
1514 addr
->sa_data
, NULL
);
1516 netdev_info(netdev
, "Ignoring error from firmware on LAA update, status %s, AQ ret %s\n",
1517 i40e_stat_str(hw
, ret
),
1518 i40e_aq_str(hw
, hw
->aq
.asq_last_status
));
1521 /* schedule our worker thread which will take care of
1522 * applying the new filter changes
1524 i40e_service_event_schedule(vsi
->back
);
1529 * i40e_vsi_setup_queue_map - Setup a VSI queue map based on enabled_tc
1530 * @vsi: the VSI being setup
1531 * @ctxt: VSI context structure
1532 * @enabled_tc: Enabled TCs bitmap
1533 * @is_add: True if called before Add VSI
1535 * Setup VSI queue mapping for enabled traffic classes.
1538 void i40e_vsi_setup_queue_map(struct i40e_vsi
*vsi
,
1539 struct i40e_vsi_context
*ctxt
,
1543 static void i40e_vsi_setup_queue_map(struct i40e_vsi
*vsi
,
1544 struct i40e_vsi_context
*ctxt
,
1549 struct i40e_pf
*pf
= vsi
->back
;
1559 sections
= I40E_AQ_VSI_PROP_QUEUE_MAP_VALID
;
1562 if (enabled_tc
&& (vsi
->back
->flags
& I40E_FLAG_DCB_ENABLED
)) {
1563 /* Find numtc from enabled TC bitmap */
1564 for (i
= 0; i
< I40E_MAX_TRAFFIC_CLASS
; i
++) {
1565 if (enabled_tc
& BIT(i
)) /* TC is enabled */
1569 dev_warn(&pf
->pdev
->dev
, "DCB is enabled but no TC enabled, forcing TC0\n");
1573 /* At least TC0 is enabled in case of non-DCB case */
1577 vsi
->tc_config
.numtc
= numtc
;
1578 vsi
->tc_config
.enabled_tc
= enabled_tc
? enabled_tc
: 1;
1579 /* Number of queues per enabled TC */
1580 qcount
= vsi
->alloc_queue_pairs
;
1582 num_tc_qps
= qcount
/ numtc
;
1583 num_tc_qps
= min_t(int, num_tc_qps
, i40e_pf_get_max_q_per_tc(pf
));
1585 /* Setup queue offset/count for all TCs for given VSI */
1586 for (i
= 0; i
< I40E_MAX_TRAFFIC_CLASS
; i
++) {
1587 /* See if the given TC is enabled for the given VSI */
1588 if (vsi
->tc_config
.enabled_tc
& BIT(i
)) {
1592 switch (vsi
->type
) {
1594 qcount
= min_t(int, pf
->alloc_rss_size
,
1599 qcount
= num_tc_qps
;
1603 case I40E_VSI_SRIOV
:
1604 case I40E_VSI_VMDQ2
:
1606 qcount
= num_tc_qps
;
1610 vsi
->tc_config
.tc_info
[i
].qoffset
= offset
;
1611 vsi
->tc_config
.tc_info
[i
].qcount
= qcount
;
1613 /* find the next higher power-of-2 of num queue pairs */
1616 while (num_qps
&& (BIT_ULL(pow
) < qcount
)) {
1621 vsi
->tc_config
.tc_info
[i
].netdev_tc
= netdev_tc
++;
1623 (offset
<< I40E_AQ_VSI_TC_QUE_OFFSET_SHIFT
) |
1624 (pow
<< I40E_AQ_VSI_TC_QUE_NUMBER_SHIFT
);
1628 /* TC is not enabled so set the offset to
1629 * default queue and allocate one queue
1632 vsi
->tc_config
.tc_info
[i
].qoffset
= 0;
1633 vsi
->tc_config
.tc_info
[i
].qcount
= 1;
1634 vsi
->tc_config
.tc_info
[i
].netdev_tc
= 0;
1638 ctxt
->info
.tc_mapping
[i
] = cpu_to_le16(qmap
);
1641 /* Set actual Tx/Rx queue pairs */
1642 vsi
->num_queue_pairs
= offset
;
1643 if ((vsi
->type
== I40E_VSI_MAIN
) && (numtc
== 1)) {
1644 if (vsi
->req_queue_pairs
> 0)
1645 vsi
->num_queue_pairs
= vsi
->req_queue_pairs
;
1646 else if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
)
1647 vsi
->num_queue_pairs
= pf
->num_lan_msix
;
1650 /* Scheduler section valid can only be set for ADD VSI */
1652 sections
|= I40E_AQ_VSI_PROP_SCHED_VALID
;
1654 ctxt
->info
.up_enable_bits
= enabled_tc
;
1656 if (vsi
->type
== I40E_VSI_SRIOV
) {
1657 ctxt
->info
.mapping_flags
|=
1658 cpu_to_le16(I40E_AQ_VSI_QUE_MAP_NONCONTIG
);
1659 for (i
= 0; i
< vsi
->num_queue_pairs
; i
++)
1660 ctxt
->info
.queue_mapping
[i
] =
1661 cpu_to_le16(vsi
->base_queue
+ i
);
1663 ctxt
->info
.mapping_flags
|=
1664 cpu_to_le16(I40E_AQ_VSI_QUE_MAP_CONTIG
);
1665 ctxt
->info
.queue_mapping
[0] = cpu_to_le16(vsi
->base_queue
);
1667 ctxt
->info
.valid_sections
|= cpu_to_le16(sections
);
1671 * i40e_set_rx_mode - NDO callback to set the netdev filters
1672 * @netdev: network interface device structure
1675 void i40e_set_rx_mode(struct net_device
*netdev
)
1677 static void i40e_set_rx_mode(struct net_device
*netdev
)
1680 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
1681 struct i40e_mac_filter
*f
, *ftmp
;
1682 struct i40e_vsi
*vsi
= np
->vsi
;
1683 struct netdev_hw_addr
*uca
;
1684 struct netdev_hw_addr
*mca
;
1685 struct netdev_hw_addr
*ha
;
1687 spin_lock_bh(&vsi
->mac_filter_list_lock
);
1689 /* add addr if not already in the filter list */
1690 netdev_for_each_uc_addr(uca
, netdev
) {
1691 if (!i40e_find_mac(vsi
, uca
->addr
, false, true)) {
1692 if (i40e_is_vsi_in_vlan(vsi
))
1693 i40e_put_mac_in_vlan(vsi
, uca
->addr
,
1696 i40e_add_filter(vsi
, uca
->addr
, I40E_VLAN_ANY
,
1701 netdev_for_each_mc_addr(mca
, netdev
) {
1702 if (!i40e_find_mac(vsi
, mca
->addr
, false, true)) {
1703 if (i40e_is_vsi_in_vlan(vsi
))
1704 i40e_put_mac_in_vlan(vsi
, mca
->addr
,
1707 i40e_add_filter(vsi
, mca
->addr
, I40E_VLAN_ANY
,
1712 /* remove filter if not in netdev list */
1713 list_for_each_entry_safe(f
, ftmp
, &vsi
->mac_filter_list
, list
) {
1718 netdev_for_each_mc_addr(mca
, netdev
)
1719 if (ether_addr_equal(mca
->addr
, f
->macaddr
))
1720 goto bottom_of_search_loop
;
1722 netdev_for_each_uc_addr(uca
, netdev
)
1723 if (ether_addr_equal(uca
->addr
, f
->macaddr
))
1724 goto bottom_of_search_loop
;
1726 for_each_dev_addr(netdev
, ha
)
1727 if (ether_addr_equal(ha
->addr
, f
->macaddr
))
1728 goto bottom_of_search_loop
;
1730 /* f->macaddr wasn't found in uc, mc, or ha list so delete it */
1731 i40e_del_filter(vsi
, f
->macaddr
, I40E_VLAN_ANY
, false, true);
1733 bottom_of_search_loop
:
1736 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
1738 /* check for other flag changes */
1739 if (vsi
->current_netdev_flags
!= vsi
->netdev
->flags
) {
1740 vsi
->flags
|= I40E_VSI_FLAG_FILTER_CHANGED
;
1741 vsi
->back
->flags
|= I40E_FLAG_FILTER_SYNC
;
1744 /* schedule our worker thread which will take care of
1745 * applying the new filter changes
1747 i40e_service_event_schedule(vsi
->back
);
1751 * i40e_undo_del_filter_entries - Undo the changes made to MAC filter entries
1752 * @vsi: pointer to vsi struct
1753 * @from: Pointer to list which contains MAC filter entries - changes to
1754 * those entries needs to be undone.
1756 * MAC filter entries from list were slated to be removed from device.
1758 static void i40e_undo_del_filter_entries(struct i40e_vsi
*vsi
,
1759 struct list_head
*from
)
1761 struct i40e_mac_filter
*f
, *ftmp
;
1763 list_for_each_entry_safe(f
, ftmp
, from
, list
) {
1764 /* Move the element back into MAC filter list*/
1765 list_move_tail(&f
->list
, &vsi
->mac_filter_list
);
1770 * i40e_update_filter_state - Update filter state based on return data
1772 * @count: Number of filters added
1773 * @add_list: return data from fw
1774 * @head: pointer to first filter in current batch
1775 * @aq_err: status from fw
1777 * MAC filter entries from list were slated to be added to device. Returns
1778 * number of successful filters. Note that 0 does NOT mean success!
1781 i40e_update_filter_state(int count
,
1782 struct i40e_aqc_add_macvlan_element_data
*add_list
,
1783 struct i40e_mac_filter
*add_head
, int aq_err
)
1791 /* Everything's good, mark all filters active. */
1792 for (i
= 0; i
< count
; i
++) {
1793 add_head
->state
= I40E_FILTER_ACTIVE
;
1794 add_head
= list_next_entry(add_head
, list
);
1796 } else if (aq_err
== I40E_AQ_RC_ENOSPC
) {
1797 /* Device ran out of filter space. Check the return value
1798 * for each filter to see which ones are active.
1800 for (i
= 0; i
< count
; i
++) {
1801 if (add_list
[i
].match_method
==
1802 I40E_AQC_MM_ERR_NO_RES
) {
1803 add_head
->state
= I40E_FILTER_FAILED
;
1805 add_head
->state
= I40E_FILTER_ACTIVE
;
1808 add_head
= list_next_entry(add_head
, list
);
1811 /* Some other horrible thing happened, fail all filters */
1813 for (i
= 0; i
< count
; i
++) {
1814 add_head
->state
= I40E_FILTER_FAILED
;
1815 add_head
= list_next_entry(add_head
, list
);
1822 * i40e_sync_vsi_filters - Update the VSI filter list to the HW
1823 * @vsi: ptr to the VSI
1825 * Push any outstanding VSI filter changes through the AdminQ.
1827 * Returns 0 or error value
1829 int i40e_sync_vsi_filters(struct i40e_vsi
*vsi
)
1831 struct i40e_mac_filter
*f
, *ftmp
, *add_head
= NULL
;
1832 struct list_head tmp_add_list
, tmp_del_list
;
1833 struct i40e_hw
*hw
= &vsi
->back
->hw
;
1834 bool promisc_changed
= false;
1835 char vsi_name
[16] = "PF";
1836 int filter_list_len
= 0;
1837 u32 changed_flags
= 0;
1838 i40e_status aq_ret
= 0;
1848 /* empty array typed pointers, kcalloc later */
1849 struct i40e_aqc_add_macvlan_element_data
*add_list
;
1850 struct i40e_aqc_remove_macvlan_element_data
*del_list
;
1852 while (test_and_set_bit(__I40E_CONFIG_BUSY
, &vsi
->state
))
1853 usleep_range(1000, 2000);
1857 changed_flags
= vsi
->current_netdev_flags
^ vsi
->netdev
->flags
;
1858 vsi
->current_netdev_flags
= vsi
->netdev
->flags
;
1861 INIT_LIST_HEAD(&tmp_add_list
);
1862 INIT_LIST_HEAD(&tmp_del_list
);
1864 if (vsi
->type
== I40E_VSI_SRIOV
)
1865 snprintf(vsi_name
, sizeof(vsi_name
) - 1, "VF %d", vsi
->vf_id
);
1866 else if (vsi
->type
!= I40E_VSI_MAIN
)
1867 snprintf(vsi_name
, sizeof(vsi_name
) - 1, "vsi %d", vsi
->seid
);
1869 if (vsi
->flags
& I40E_VSI_FLAG_FILTER_CHANGED
) {
1870 vsi
->flags
&= ~I40E_VSI_FLAG_FILTER_CHANGED
;
1872 spin_lock_bh(&vsi
->mac_filter_list_lock
);
1873 /* Create a list of filters to delete. */
1874 list_for_each_entry_safe(f
, ftmp
, &vsi
->mac_filter_list
, list
) {
1875 if (f
->state
== I40E_FILTER_REMOVE
) {
1876 WARN_ON(f
->counter
!= 0);
1877 /* Move the element into temporary del_list */
1878 list_move_tail(&f
->list
, &tmp_del_list
);
1879 vsi
->active_filters
--;
1881 if (f
->state
== I40E_FILTER_NEW
) {
1882 WARN_ON(f
->counter
== 0);
1883 /* Move the element into temporary add_list */
1884 list_move_tail(&f
->list
, &tmp_add_list
);
1887 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
1890 /* Now process 'del_list' outside the lock */
1891 if (!list_empty(&tmp_del_list
)) {
1892 filter_list_len
= hw
->aq
.asq_buf_size
/
1893 sizeof(struct i40e_aqc_remove_macvlan_element_data
);
1894 list_size
= filter_list_len
*
1895 sizeof(struct i40e_aqc_remove_macvlan_element_data
);
1896 del_list
= kzalloc(list_size
, GFP_ATOMIC
);
1898 /* Undo VSI's MAC filter entry element updates */
1899 spin_lock_bh(&vsi
->mac_filter_list_lock
);
1900 i40e_undo_del_filter_entries(vsi
, &tmp_del_list
);
1901 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
1906 list_for_each_entry_safe(f
, ftmp
, &tmp_del_list
, list
) {
1909 /* add to delete list */
1910 ether_addr_copy(del_list
[num_del
].mac_addr
, f
->macaddr
);
1911 if (f
->vlan
== I40E_VLAN_ANY
) {
1912 del_list
[num_del
].vlan_tag
= 0;
1913 cmd_flags
|= I40E_AQC_MACVLAN_ADD_IGNORE_VLAN
;
1915 del_list
[num_del
].vlan_tag
=
1916 cpu_to_le16((u16
)(f
->vlan
));
1919 cmd_flags
|= I40E_AQC_MACVLAN_DEL_PERFECT_MATCH
;
1920 del_list
[num_del
].flags
= cmd_flags
;
1923 /* flush a full buffer */
1924 if (num_del
== filter_list_len
) {
1925 aq_ret
= i40e_aq_remove_macvlan(hw
, vsi
->seid
,
1928 aq_err
= hw
->aq
.asq_last_status
;
1930 memset(del_list
, 0, list_size
);
1932 /* Explicitly ignore and do not report when
1933 * firmware returns ENOENT.
1935 if (aq_ret
&& !(aq_err
== I40E_AQ_RC_ENOENT
)) {
1937 dev_info(&pf
->pdev
->dev
,
1938 "ignoring delete macvlan error on %s, err %s, aq_err %s\n",
1940 i40e_stat_str(hw
, aq_ret
),
1941 i40e_aq_str(hw
, aq_err
));
1944 /* Release memory for MAC filter entries which were
1945 * synced up with HW.
1952 aq_ret
= i40e_aq_remove_macvlan(hw
, vsi
->seid
, del_list
,
1954 aq_err
= hw
->aq
.asq_last_status
;
1957 /* Explicitly ignore and do not report when firmware
1960 if (aq_ret
&& !(aq_err
== I40E_AQ_RC_ENOENT
)) {
1962 dev_info(&pf
->pdev
->dev
,
1963 "ignoring delete macvlan error on %s, err %s aq_err %s\n",
1965 i40e_stat_str(hw
, aq_ret
),
1966 i40e_aq_str(hw
, aq_err
));
1974 if (!list_empty(&tmp_add_list
)) {
1975 /* Do all the adds now. */
1976 filter_list_len
= hw
->aq
.asq_buf_size
/
1977 sizeof(struct i40e_aqc_add_macvlan_element_data
);
1978 list_size
= filter_list_len
*
1979 sizeof(struct i40e_aqc_add_macvlan_element_data
);
1980 add_list
= kzalloc(list_size
, GFP_ATOMIC
);
1986 list_for_each_entry(f
, &tmp_add_list
, list
) {
1987 if (test_bit(__I40E_FILTER_OVERFLOW_PROMISC
,
1989 f
->state
= I40E_FILTER_FAILED
;
1992 /* add to add array */
1996 ether_addr_copy(add_list
[num_add
].mac_addr
, f
->macaddr
);
1997 if (f
->vlan
== I40E_VLAN_ANY
) {
1998 add_list
[num_add
].vlan_tag
= 0;
1999 cmd_flags
|= I40E_AQC_MACVLAN_ADD_IGNORE_VLAN
;
2001 add_list
[num_add
].vlan_tag
=
2002 cpu_to_le16((u16
)(f
->vlan
));
2004 add_list
[num_add
].queue_number
= 0;
2005 cmd_flags
|= I40E_AQC_MACVLAN_ADD_PERFECT_MATCH
;
2006 add_list
[num_add
].flags
= cpu_to_le16(cmd_flags
);
2009 /* flush a full buffer */
2010 if (num_add
== filter_list_len
) {
2011 aq_ret
= i40e_aq_add_macvlan(hw
, vsi
->seid
,
2014 aq_err
= hw
->aq
.asq_last_status
;
2015 fcnt
= i40e_update_filter_state(num_add
,
2019 vsi
->active_filters
+= fcnt
;
2021 if (fcnt
!= num_add
) {
2022 promisc_changed
= true;
2023 set_bit(__I40E_FILTER_OVERFLOW_PROMISC
,
2025 vsi
->promisc_threshold
=
2026 (vsi
->active_filters
* 3) / 4;
2027 dev_warn(&pf
->pdev
->dev
,
2028 "Error %s adding RX filters on %s, promiscuous mode forced on\n",
2029 i40e_aq_str(hw
, aq_err
),
2032 memset(add_list
, 0, list_size
);
2037 aq_ret
= i40e_aq_add_macvlan(hw
, vsi
->seid
,
2038 add_list
, num_add
, NULL
);
2039 aq_err
= hw
->aq
.asq_last_status
;
2040 fcnt
= i40e_update_filter_state(num_add
, add_list
,
2042 vsi
->active_filters
+= fcnt
;
2043 if (fcnt
!= num_add
) {
2044 promisc_changed
= true;
2045 set_bit(__I40E_FILTER_OVERFLOW_PROMISC
,
2047 vsi
->promisc_threshold
=
2048 (vsi
->active_filters
* 3) / 4;
2049 dev_warn(&pf
->pdev
->dev
,
2050 "Error %s adding RX filters on %s, promiscuous mode forced on\n",
2051 i40e_aq_str(hw
, aq_err
), vsi_name
);
2054 /* Now move all of the filters from the temp add list back to
2057 spin_lock_bh(&vsi
->mac_filter_list_lock
);
2058 list_for_each_entry_safe(f
, ftmp
, &tmp_add_list
, list
) {
2059 list_move_tail(&f
->list
, &vsi
->mac_filter_list
);
2061 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
2066 /* Check to see if we can drop out of overflow promiscuous mode. */
2067 if (test_bit(__I40E_FILTER_OVERFLOW_PROMISC
, &vsi
->state
) &&
2068 (vsi
->active_filters
< vsi
->promisc_threshold
)) {
2069 int failed_count
= 0;
2070 /* See if we have any failed filters. We can't drop out of
2071 * promiscuous until these have all been deleted.
2073 spin_lock_bh(&vsi
->mac_filter_list_lock
);
2074 list_for_each_entry(f
, &vsi
->mac_filter_list
, list
) {
2075 if (f
->state
== I40E_FILTER_FAILED
)
2078 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
2079 if (!failed_count
) {
2080 dev_info(&pf
->pdev
->dev
,
2081 "filter logjam cleared on %s, leaving overflow promiscuous mode\n",
2083 clear_bit(__I40E_FILTER_OVERFLOW_PROMISC
, &vsi
->state
);
2084 promisc_changed
= true;
2085 vsi
->promisc_threshold
= 0;
2089 /* if the VF is not trusted do not do promisc */
2090 if ((vsi
->type
== I40E_VSI_SRIOV
) && !pf
->vf
[vsi
->vf_id
].trusted
) {
2091 clear_bit(__I40E_FILTER_OVERFLOW_PROMISC
, &vsi
->state
);
2095 /* check for changes in promiscuous modes */
2096 if (changed_flags
& IFF_ALLMULTI
) {
2097 bool cur_multipromisc
;
2099 cur_multipromisc
= !!(vsi
->current_netdev_flags
& IFF_ALLMULTI
);
2100 aq_ret
= i40e_aq_set_vsi_multicast_promiscuous(&vsi
->back
->hw
,
2105 retval
= i40e_aq_rc_to_posix(aq_ret
,
2106 hw
->aq
.asq_last_status
);
2107 dev_info(&pf
->pdev
->dev
,
2108 "set multi promisc failed on %s, err %s aq_err %s\n",
2110 i40e_stat_str(hw
, aq_ret
),
2111 i40e_aq_str(hw
, hw
->aq
.asq_last_status
));
2114 if ((changed_flags
& IFF_PROMISC
) ||
2116 test_bit(__I40E_FILTER_OVERFLOW_PROMISC
, &vsi
->state
))) {
2119 cur_promisc
= (!!(vsi
->current_netdev_flags
& IFF_PROMISC
) ||
2120 test_bit(__I40E_FILTER_OVERFLOW_PROMISC
,
2122 if ((vsi
->type
== I40E_VSI_MAIN
) &&
2123 (pf
->lan_veb
!= I40E_NO_VEB
) &&
2124 !(pf
->flags
& I40E_FLAG_MFP_ENABLED
)) {
2125 /* set defport ON for Main VSI instead of true promisc
2126 * this way we will get all unicast/multicast and VLAN
2127 * promisc behavior but will not get VF or VMDq traffic
2128 * replicated on the Main VSI.
2130 if (pf
->cur_promisc
!= cur_promisc
) {
2131 pf
->cur_promisc
= cur_promisc
;
2134 i40e_aq_set_default_vsi(hw
,
2139 i40e_aq_clear_default_vsi(hw
,
2143 retval
= i40e_aq_rc_to_posix(aq_ret
,
2144 hw
->aq
.asq_last_status
);
2145 dev_info(&pf
->pdev
->dev
,
2146 "Set default VSI failed on %s, err %s, aq_err %s\n",
2148 i40e_stat_str(hw
, aq_ret
),
2150 hw
->aq
.asq_last_status
));
2154 aq_ret
= i40e_aq_set_vsi_unicast_promiscuous(
2161 i40e_aq_rc_to_posix(aq_ret
,
2162 hw
->aq
.asq_last_status
);
2163 dev_info(&pf
->pdev
->dev
,
2164 "set unicast promisc failed on %s, err %s, aq_err %s\n",
2166 i40e_stat_str(hw
, aq_ret
),
2168 hw
->aq
.asq_last_status
));
2170 aq_ret
= i40e_aq_set_vsi_multicast_promiscuous(
2176 i40e_aq_rc_to_posix(aq_ret
,
2177 hw
->aq
.asq_last_status
);
2178 dev_info(&pf
->pdev
->dev
,
2179 "set multicast promisc failed on %s, err %s, aq_err %s\n",
2181 i40e_stat_str(hw
, aq_ret
),
2183 hw
->aq
.asq_last_status
));
2186 aq_ret
= i40e_aq_set_vsi_broadcast(&vsi
->back
->hw
,
2190 retval
= i40e_aq_rc_to_posix(aq_ret
,
2191 pf
->hw
.aq
.asq_last_status
);
2192 dev_info(&pf
->pdev
->dev
,
2193 "set brdcast promisc failed, err %s, aq_err %s\n",
2194 i40e_stat_str(hw
, aq_ret
),
2196 hw
->aq
.asq_last_status
));
2200 /* if something went wrong then set the changed flag so we try again */
2202 vsi
->flags
|= I40E_VSI_FLAG_FILTER_CHANGED
;
2204 clear_bit(__I40E_CONFIG_BUSY
, &vsi
->state
);
2209 * i40e_sync_filters_subtask - Sync the VSI filter list with HW
2210 * @pf: board private structure
2212 static void i40e_sync_filters_subtask(struct i40e_pf
*pf
)
2216 if (!pf
|| !(pf
->flags
& I40E_FLAG_FILTER_SYNC
))
2218 pf
->flags
&= ~I40E_FLAG_FILTER_SYNC
;
2220 for (v
= 0; v
< pf
->num_alloc_vsi
; v
++) {
2222 (pf
->vsi
[v
]->flags
& I40E_VSI_FLAG_FILTER_CHANGED
)) {
2223 int ret
= i40e_sync_vsi_filters(pf
->vsi
[v
]);
2226 /* come back and try again later */
2227 pf
->flags
|= I40E_FLAG_FILTER_SYNC
;
2235 * i40e_change_mtu - NDO callback to change the Maximum Transfer Unit
2236 * @netdev: network interface device structure
2237 * @new_mtu: new value for maximum frame size
2239 * Returns 0 on success, negative on failure
2241 static int i40e_change_mtu(struct net_device
*netdev
, int new_mtu
)
2243 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
2244 int max_frame
= new_mtu
+ ETH_HLEN
+ ETH_FCS_LEN
+ VLAN_HLEN
;
2245 struct i40e_vsi
*vsi
= np
->vsi
;
2247 /* MTU < 68 is an error and causes problems on some kernels */
2248 if ((new_mtu
< 68) || (max_frame
> I40E_MAX_RXBUFFER
))
2251 netdev_info(netdev
, "changing MTU from %d to %d\n",
2252 netdev
->mtu
, new_mtu
);
2253 netdev
->mtu
= new_mtu
;
2254 if (netif_running(netdev
))
2255 i40e_vsi_reinit_locked(vsi
);
2256 i40e_notify_client_of_l2_param_changes(vsi
);
2261 * i40e_ioctl - Access the hwtstamp interface
2262 * @netdev: network interface device structure
2263 * @ifr: interface request data
2264 * @cmd: ioctl command
2266 int i40e_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
2268 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
2269 struct i40e_pf
*pf
= np
->vsi
->back
;
2273 return i40e_ptp_get_ts_config(pf
, ifr
);
2275 return i40e_ptp_set_ts_config(pf
, ifr
);
2282 * i40e_vlan_stripping_enable - Turn on vlan stripping for the VSI
2283 * @vsi: the vsi being adjusted
2285 void i40e_vlan_stripping_enable(struct i40e_vsi
*vsi
)
2287 struct i40e_vsi_context ctxt
;
2290 if ((vsi
->info
.valid_sections
&
2291 cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID
)) &&
2292 ((vsi
->info
.port_vlan_flags
& I40E_AQ_VSI_PVLAN_MODE_MASK
) == 0))
2293 return; /* already enabled */
2295 vsi
->info
.valid_sections
= cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID
);
2296 vsi
->info
.port_vlan_flags
= I40E_AQ_VSI_PVLAN_MODE_ALL
|
2297 I40E_AQ_VSI_PVLAN_EMOD_STR_BOTH
;
2299 ctxt
.seid
= vsi
->seid
;
2300 ctxt
.info
= vsi
->info
;
2301 ret
= i40e_aq_update_vsi_params(&vsi
->back
->hw
, &ctxt
, NULL
);
2303 dev_info(&vsi
->back
->pdev
->dev
,
2304 "update vlan stripping failed, err %s aq_err %s\n",
2305 i40e_stat_str(&vsi
->back
->hw
, ret
),
2306 i40e_aq_str(&vsi
->back
->hw
,
2307 vsi
->back
->hw
.aq
.asq_last_status
));
2312 * i40e_vlan_stripping_disable - Turn off vlan stripping for the VSI
2313 * @vsi: the vsi being adjusted
2315 void i40e_vlan_stripping_disable(struct i40e_vsi
*vsi
)
2317 struct i40e_vsi_context ctxt
;
2320 if ((vsi
->info
.valid_sections
&
2321 cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID
)) &&
2322 ((vsi
->info
.port_vlan_flags
& I40E_AQ_VSI_PVLAN_EMOD_MASK
) ==
2323 I40E_AQ_VSI_PVLAN_EMOD_MASK
))
2324 return; /* already disabled */
2326 vsi
->info
.valid_sections
= cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID
);
2327 vsi
->info
.port_vlan_flags
= I40E_AQ_VSI_PVLAN_MODE_ALL
|
2328 I40E_AQ_VSI_PVLAN_EMOD_NOTHING
;
2330 ctxt
.seid
= vsi
->seid
;
2331 ctxt
.info
= vsi
->info
;
2332 ret
= i40e_aq_update_vsi_params(&vsi
->back
->hw
, &ctxt
, NULL
);
2334 dev_info(&vsi
->back
->pdev
->dev
,
2335 "update vlan stripping failed, err %s aq_err %s\n",
2336 i40e_stat_str(&vsi
->back
->hw
, ret
),
2337 i40e_aq_str(&vsi
->back
->hw
,
2338 vsi
->back
->hw
.aq
.asq_last_status
));
2343 * i40e_vlan_rx_register - Setup or shutdown vlan offload
2344 * @netdev: network interface to be adjusted
2345 * @features: netdev features to test if VLAN offload is enabled or not
2347 static void i40e_vlan_rx_register(struct net_device
*netdev
, u32 features
)
2349 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
2350 struct i40e_vsi
*vsi
= np
->vsi
;
2352 if (features
& NETIF_F_HW_VLAN_CTAG_RX
)
2353 i40e_vlan_stripping_enable(vsi
);
2355 i40e_vlan_stripping_disable(vsi
);
2359 * i40e_vsi_add_vlan - Add vsi membership for given vlan
2360 * @vsi: the vsi being configured
2361 * @vid: vlan id to be added (0 = untagged only , -1 = any)
2363 int i40e_vsi_add_vlan(struct i40e_vsi
*vsi
, s16 vid
)
2365 struct i40e_mac_filter
*f
, *ftmp
, *add_f
;
2366 bool is_netdev
, is_vf
;
2368 is_vf
= (vsi
->type
== I40E_VSI_SRIOV
);
2369 is_netdev
= !!(vsi
->netdev
);
2371 /* Locked once because all functions invoked below iterates list*/
2372 spin_lock_bh(&vsi
->mac_filter_list_lock
);
2375 add_f
= i40e_add_filter(vsi
, vsi
->netdev
->dev_addr
, vid
,
2378 dev_info(&vsi
->back
->pdev
->dev
,
2379 "Could not add vlan filter %d for %pM\n",
2380 vid
, vsi
->netdev
->dev_addr
);
2381 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
2386 list_for_each_entry_safe(f
, ftmp
, &vsi
->mac_filter_list
, list
) {
2387 add_f
= i40e_add_filter(vsi
, f
->macaddr
, vid
, is_vf
, is_netdev
);
2389 dev_info(&vsi
->back
->pdev
->dev
,
2390 "Could not add vlan filter %d for %pM\n",
2392 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
2397 /* Now if we add a vlan tag, make sure to check if it is the first
2398 * tag (i.e. a "tag" -1 does exist) and if so replace the -1 "tag"
2399 * with 0, so we now accept untagged and specified tagged traffic
2400 * (and not all tags along with untagged)
2403 if (is_netdev
&& i40e_find_filter(vsi
, vsi
->netdev
->dev_addr
,
2405 is_vf
, is_netdev
)) {
2406 i40e_del_filter(vsi
, vsi
->netdev
->dev_addr
,
2407 I40E_VLAN_ANY
, is_vf
, is_netdev
);
2408 add_f
= i40e_add_filter(vsi
, vsi
->netdev
->dev_addr
, 0,
2411 dev_info(&vsi
->back
->pdev
->dev
,
2412 "Could not add filter 0 for %pM\n",
2413 vsi
->netdev
->dev_addr
);
2414 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
2420 /* Do not assume that I40E_VLAN_ANY should be reset to VLAN 0 */
2421 if (vid
> 0 && !vsi
->info
.pvid
) {
2422 list_for_each_entry_safe(f
, ftmp
, &vsi
->mac_filter_list
, list
) {
2423 if (!i40e_find_filter(vsi
, f
->macaddr
, I40E_VLAN_ANY
,
2426 i40e_del_filter(vsi
, f
->macaddr
, I40E_VLAN_ANY
,
2428 add_f
= i40e_add_filter(vsi
, f
->macaddr
,
2429 0, is_vf
, is_netdev
);
2431 dev_info(&vsi
->back
->pdev
->dev
,
2432 "Could not add filter 0 for %pM\n",
2434 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
2440 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
2442 /* schedule our worker thread which will take care of
2443 * applying the new filter changes
2445 i40e_service_event_schedule(vsi
->back
);
2450 * i40e_vsi_kill_vlan - Remove vsi membership for given vlan
2451 * @vsi: the vsi being configured
2452 * @vid: vlan id to be removed (0 = untagged only , -1 = any)
2454 * Return: 0 on success or negative otherwise
2456 int i40e_vsi_kill_vlan(struct i40e_vsi
*vsi
, s16 vid
)
2458 struct net_device
*netdev
= vsi
->netdev
;
2459 struct i40e_mac_filter
*f
, *ftmp
, *add_f
;
2460 bool is_vf
, is_netdev
;
2461 int filter_count
= 0;
2463 is_vf
= (vsi
->type
== I40E_VSI_SRIOV
);
2464 is_netdev
= !!(netdev
);
2466 /* Locked once because all functions invoked below iterates list */
2467 spin_lock_bh(&vsi
->mac_filter_list_lock
);
2470 i40e_del_filter(vsi
, netdev
->dev_addr
, vid
, is_vf
, is_netdev
);
2472 list_for_each_entry_safe(f
, ftmp
, &vsi
->mac_filter_list
, list
)
2473 i40e_del_filter(vsi
, f
->macaddr
, vid
, is_vf
, is_netdev
);
2475 /* go through all the filters for this VSI and if there is only
2476 * vid == 0 it means there are no other filters, so vid 0 must
2477 * be replaced with -1. This signifies that we should from now
2478 * on accept any traffic (with any tag present, or untagged)
2480 list_for_each_entry(f
, &vsi
->mac_filter_list
, list
) {
2483 ether_addr_equal(netdev
->dev_addr
, f
->macaddr
))
2491 if (!filter_count
&& is_netdev
) {
2492 i40e_del_filter(vsi
, netdev
->dev_addr
, 0, is_vf
, is_netdev
);
2493 f
= i40e_add_filter(vsi
, netdev
->dev_addr
, I40E_VLAN_ANY
,
2496 dev_info(&vsi
->back
->pdev
->dev
,
2497 "Could not add filter %d for %pM\n",
2498 I40E_VLAN_ANY
, netdev
->dev_addr
);
2499 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
2504 if (!filter_count
) {
2505 list_for_each_entry_safe(f
, ftmp
, &vsi
->mac_filter_list
, list
) {
2506 i40e_del_filter(vsi
, f
->macaddr
, 0, is_vf
, is_netdev
);
2507 add_f
= i40e_add_filter(vsi
, f
->macaddr
, I40E_VLAN_ANY
,
2510 dev_info(&vsi
->back
->pdev
->dev
,
2511 "Could not add filter %d for %pM\n",
2512 I40E_VLAN_ANY
, f
->macaddr
);
2513 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
2519 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
2521 /* schedule our worker thread which will take care of
2522 * applying the new filter changes
2524 i40e_service_event_schedule(vsi
->back
);
2529 * i40e_vlan_rx_add_vid - Add a vlan id filter to HW offload
2530 * @netdev: network interface to be adjusted
2531 * @vid: vlan id to be added
2533 * net_device_ops implementation for adding vlan ids
2536 int i40e_vlan_rx_add_vid(struct net_device
*netdev
,
2537 __always_unused __be16 proto
, u16 vid
)
2539 static int i40e_vlan_rx_add_vid(struct net_device
*netdev
,
2540 __always_unused __be16 proto
, u16 vid
)
2543 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
2544 struct i40e_vsi
*vsi
= np
->vsi
;
2550 /* If the network stack called us with vid = 0 then
2551 * it is asking to receive priority tagged packets with
2552 * vlan id 0. Our HW receives them by default when configured
2553 * to receive untagged packets so there is no need to add an
2554 * extra filter for vlan 0 tagged packets.
2557 ret
= i40e_vsi_add_vlan(vsi
, vid
);
2559 if (!ret
&& (vid
< VLAN_N_VID
))
2560 set_bit(vid
, vsi
->active_vlans
);
2566 * i40e_vlan_rx_kill_vid - Remove a vlan id filter from HW offload
2567 * @netdev: network interface to be adjusted
2568 * @vid: vlan id to be removed
2570 * net_device_ops implementation for removing vlan ids
2573 int i40e_vlan_rx_kill_vid(struct net_device
*netdev
,
2574 __always_unused __be16 proto
, u16 vid
)
2576 static int i40e_vlan_rx_kill_vid(struct net_device
*netdev
,
2577 __always_unused __be16 proto
, u16 vid
)
2580 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
2581 struct i40e_vsi
*vsi
= np
->vsi
;
2583 /* return code is ignored as there is nothing a user
2584 * can do about failure to remove and a log message was
2585 * already printed from the other function
2587 i40e_vsi_kill_vlan(vsi
, vid
);
2589 clear_bit(vid
, vsi
->active_vlans
);
2595 * i40e_macaddr_init - explicitly write the mac address filters
2597 * @vsi: pointer to the vsi
2598 * @macaddr: the MAC address
2600 * This is needed when the macaddr has been obtained by other
2601 * means than the default, e.g., from Open Firmware or IDPROM.
2602 * Returns 0 on success, negative on failure
2604 static int i40e_macaddr_init(struct i40e_vsi
*vsi
, u8
*macaddr
)
2607 struct i40e_aqc_add_macvlan_element_data element
;
2609 ret
= i40e_aq_mac_address_write(&vsi
->back
->hw
,
2610 I40E_AQC_WRITE_TYPE_LAA_WOL
,
2613 dev_info(&vsi
->back
->pdev
->dev
,
2614 "Addr change for VSI failed: %d\n", ret
);
2615 return -EADDRNOTAVAIL
;
2618 memset(&element
, 0, sizeof(element
));
2619 ether_addr_copy(element
.mac_addr
, macaddr
);
2620 element
.flags
= cpu_to_le16(I40E_AQC_MACVLAN_ADD_PERFECT_MATCH
);
2621 ret
= i40e_aq_add_macvlan(&vsi
->back
->hw
, vsi
->seid
, &element
, 1, NULL
);
2623 dev_info(&vsi
->back
->pdev
->dev
,
2624 "add filter failed err %s aq_err %s\n",
2625 i40e_stat_str(&vsi
->back
->hw
, ret
),
2626 i40e_aq_str(&vsi
->back
->hw
,
2627 vsi
->back
->hw
.aq
.asq_last_status
));
2633 * i40e_restore_vlan - Reinstate vlans when vsi/netdev comes back up
2634 * @vsi: the vsi being brought back up
2636 static void i40e_restore_vlan(struct i40e_vsi
*vsi
)
2643 i40e_vlan_rx_register(vsi
->netdev
, vsi
->netdev
->features
);
2645 for_each_set_bit(vid
, vsi
->active_vlans
, VLAN_N_VID
)
2646 i40e_vlan_rx_add_vid(vsi
->netdev
, htons(ETH_P_8021Q
),
2651 * i40e_vsi_add_pvid - Add pvid for the VSI
2652 * @vsi: the vsi being adjusted
2653 * @vid: the vlan id to set as a PVID
2655 int i40e_vsi_add_pvid(struct i40e_vsi
*vsi
, u16 vid
)
2657 struct i40e_vsi_context ctxt
;
2660 vsi
->info
.valid_sections
= cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID
);
2661 vsi
->info
.pvid
= cpu_to_le16(vid
);
2662 vsi
->info
.port_vlan_flags
= I40E_AQ_VSI_PVLAN_MODE_TAGGED
|
2663 I40E_AQ_VSI_PVLAN_INSERT_PVID
|
2664 I40E_AQ_VSI_PVLAN_EMOD_STR
;
2666 ctxt
.seid
= vsi
->seid
;
2667 ctxt
.info
= vsi
->info
;
2668 ret
= i40e_aq_update_vsi_params(&vsi
->back
->hw
, &ctxt
, NULL
);
2670 dev_info(&vsi
->back
->pdev
->dev
,
2671 "add pvid failed, err %s aq_err %s\n",
2672 i40e_stat_str(&vsi
->back
->hw
, ret
),
2673 i40e_aq_str(&vsi
->back
->hw
,
2674 vsi
->back
->hw
.aq
.asq_last_status
));
2682 * i40e_vsi_remove_pvid - Remove the pvid from the VSI
2683 * @vsi: the vsi being adjusted
2685 * Just use the vlan_rx_register() service to put it back to normal
2687 void i40e_vsi_remove_pvid(struct i40e_vsi
*vsi
)
2689 i40e_vlan_stripping_disable(vsi
);
2695 * i40e_vsi_setup_tx_resources - Allocate VSI Tx queue resources
2696 * @vsi: ptr to the VSI
2698 * If this function returns with an error, then it's possible one or
2699 * more of the rings is populated (while the rest are not). It is the
2700 * callers duty to clean those orphaned rings.
2702 * Return 0 on success, negative on failure
2704 static int i40e_vsi_setup_tx_resources(struct i40e_vsi
*vsi
)
2708 for (i
= 0; i
< vsi
->num_queue_pairs
&& !err
; i
++)
2709 err
= i40e_setup_tx_descriptors(vsi
->tx_rings
[i
]);
2715 * i40e_vsi_free_tx_resources - Free Tx resources for VSI queues
2716 * @vsi: ptr to the VSI
2718 * Free VSI's transmit software resources
2720 static void i40e_vsi_free_tx_resources(struct i40e_vsi
*vsi
)
2727 for (i
= 0; i
< vsi
->num_queue_pairs
; i
++)
2728 if (vsi
->tx_rings
[i
] && vsi
->tx_rings
[i
]->desc
)
2729 i40e_free_tx_resources(vsi
->tx_rings
[i
]);
2733 * i40e_vsi_setup_rx_resources - Allocate VSI queues Rx resources
2734 * @vsi: ptr to the VSI
2736 * If this function returns with an error, then it's possible one or
2737 * more of the rings is populated (while the rest are not). It is the
2738 * callers duty to clean those orphaned rings.
2740 * Return 0 on success, negative on failure
2742 static int i40e_vsi_setup_rx_resources(struct i40e_vsi
*vsi
)
2746 for (i
= 0; i
< vsi
->num_queue_pairs
&& !err
; i
++)
2747 err
= i40e_setup_rx_descriptors(vsi
->rx_rings
[i
]);
2749 i40e_fcoe_setup_ddp_resources(vsi
);
2755 * i40e_vsi_free_rx_resources - Free Rx Resources for VSI queues
2756 * @vsi: ptr to the VSI
2758 * Free all receive software resources
2760 static void i40e_vsi_free_rx_resources(struct i40e_vsi
*vsi
)
2767 for (i
= 0; i
< vsi
->num_queue_pairs
; i
++)
2768 if (vsi
->rx_rings
[i
] && vsi
->rx_rings
[i
]->desc
)
2769 i40e_free_rx_resources(vsi
->rx_rings
[i
]);
2771 i40e_fcoe_free_ddp_resources(vsi
);
2776 * i40e_config_xps_tx_ring - Configure XPS for a Tx ring
2777 * @ring: The Tx ring to configure
2779 * This enables/disables XPS for a given Tx descriptor ring
2780 * based on the TCs enabled for the VSI that ring belongs to.
2782 static void i40e_config_xps_tx_ring(struct i40e_ring
*ring
)
2784 struct i40e_vsi
*vsi
= ring
->vsi
;
2787 if (!ring
->q_vector
|| !ring
->netdev
)
2790 /* Single TC mode enable XPS */
2791 if (vsi
->tc_config
.numtc
<= 1) {
2792 if (!test_and_set_bit(__I40E_TX_XPS_INIT_DONE
, &ring
->state
))
2793 netif_set_xps_queue(ring
->netdev
,
2794 &ring
->q_vector
->affinity_mask
,
2796 } else if (alloc_cpumask_var(&mask
, GFP_KERNEL
)) {
2797 /* Disable XPS to allow selection based on TC */
2798 bitmap_zero(cpumask_bits(mask
), nr_cpumask_bits
);
2799 netif_set_xps_queue(ring
->netdev
, mask
, ring
->queue_index
);
2800 free_cpumask_var(mask
);
2803 /* schedule our worker thread which will take care of
2804 * applying the new filter changes
2806 i40e_service_event_schedule(vsi
->back
);
2810 * i40e_configure_tx_ring - Configure a transmit ring context and rest
2811 * @ring: The Tx ring to configure
2813 * Configure the Tx descriptor ring in the HMC context.
2815 static int i40e_configure_tx_ring(struct i40e_ring
*ring
)
2817 struct i40e_vsi
*vsi
= ring
->vsi
;
2818 u16 pf_q
= vsi
->base_queue
+ ring
->queue_index
;
2819 struct i40e_hw
*hw
= &vsi
->back
->hw
;
2820 struct i40e_hmc_obj_txq tx_ctx
;
2821 i40e_status err
= 0;
2824 /* some ATR related tx ring init */
2825 if (vsi
->back
->flags
& I40E_FLAG_FD_ATR_ENABLED
) {
2826 ring
->atr_sample_rate
= vsi
->back
->atr_sample_rate
;
2827 ring
->atr_count
= 0;
2829 ring
->atr_sample_rate
= 0;
2833 i40e_config_xps_tx_ring(ring
);
2835 /* clear the context structure first */
2836 memset(&tx_ctx
, 0, sizeof(tx_ctx
));
2838 tx_ctx
.new_context
= 1;
2839 tx_ctx
.base
= (ring
->dma
/ 128);
2840 tx_ctx
.qlen
= ring
->count
;
2841 tx_ctx
.fd_ena
= !!(vsi
->back
->flags
& (I40E_FLAG_FD_SB_ENABLED
|
2842 I40E_FLAG_FD_ATR_ENABLED
));
2844 tx_ctx
.fc_ena
= (vsi
->type
== I40E_VSI_FCOE
);
2846 tx_ctx
.timesync_ena
= !!(vsi
->back
->flags
& I40E_FLAG_PTP
);
2847 /* FDIR VSI tx ring can still use RS bit and writebacks */
2848 if (vsi
->type
!= I40E_VSI_FDIR
)
2849 tx_ctx
.head_wb_ena
= 1;
2850 tx_ctx
.head_wb_addr
= ring
->dma
+
2851 (ring
->count
* sizeof(struct i40e_tx_desc
));
2853 /* As part of VSI creation/update, FW allocates certain
2854 * Tx arbitration queue sets for each TC enabled for
2855 * the VSI. The FW returns the handles to these queue
2856 * sets as part of the response buffer to Add VSI,
2857 * Update VSI, etc. AQ commands. It is expected that
2858 * these queue set handles be associated with the Tx
2859 * queues by the driver as part of the TX queue context
2860 * initialization. This has to be done regardless of
2861 * DCB as by default everything is mapped to TC0.
2863 tx_ctx
.rdylist
= le16_to_cpu(vsi
->info
.qs_handle
[ring
->dcb_tc
]);
2864 tx_ctx
.rdylist_act
= 0;
2866 /* clear the context in the HMC */
2867 err
= i40e_clear_lan_tx_queue_context(hw
, pf_q
);
2869 dev_info(&vsi
->back
->pdev
->dev
,
2870 "Failed to clear LAN Tx queue context on Tx ring %d (pf_q %d), error: %d\n",
2871 ring
->queue_index
, pf_q
, err
);
2875 /* set the context in the HMC */
2876 err
= i40e_set_lan_tx_queue_context(hw
, pf_q
, &tx_ctx
);
2878 dev_info(&vsi
->back
->pdev
->dev
,
2879 "Failed to set LAN Tx queue context on Tx ring %d (pf_q %d, error: %d\n",
2880 ring
->queue_index
, pf_q
, err
);
2884 /* Now associate this queue with this PCI function */
2885 if (vsi
->type
== I40E_VSI_VMDQ2
) {
2886 qtx_ctl
= I40E_QTX_CTL_VM_QUEUE
;
2887 qtx_ctl
|= ((vsi
->id
) << I40E_QTX_CTL_VFVM_INDX_SHIFT
) &
2888 I40E_QTX_CTL_VFVM_INDX_MASK
;
2890 qtx_ctl
= I40E_QTX_CTL_PF_QUEUE
;
2893 qtx_ctl
|= ((hw
->pf_id
<< I40E_QTX_CTL_PF_INDX_SHIFT
) &
2894 I40E_QTX_CTL_PF_INDX_MASK
);
2895 wr32(hw
, I40E_QTX_CTL(pf_q
), qtx_ctl
);
2898 /* cache tail off for easier writes later */
2899 ring
->tail
= hw
->hw_addr
+ I40E_QTX_TAIL(pf_q
);
2905 * i40e_configure_rx_ring - Configure a receive ring context
2906 * @ring: The Rx ring to configure
2908 * Configure the Rx descriptor ring in the HMC context.
2910 static int i40e_configure_rx_ring(struct i40e_ring
*ring
)
2912 struct i40e_vsi
*vsi
= ring
->vsi
;
2913 u32 chain_len
= vsi
->back
->hw
.func_caps
.rx_buf_chain_len
;
2914 u16 pf_q
= vsi
->base_queue
+ ring
->queue_index
;
2915 struct i40e_hw
*hw
= &vsi
->back
->hw
;
2916 struct i40e_hmc_obj_rxq rx_ctx
;
2917 i40e_status err
= 0;
2921 /* clear the context structure first */
2922 memset(&rx_ctx
, 0, sizeof(rx_ctx
));
2924 ring
->rx_buf_len
= vsi
->rx_buf_len
;
2926 rx_ctx
.dbuff
= ring
->rx_buf_len
>> I40E_RXQ_CTX_DBUFF_SHIFT
;
2928 rx_ctx
.base
= (ring
->dma
/ 128);
2929 rx_ctx
.qlen
= ring
->count
;
2931 /* use 32 byte descriptors */
2934 /* descriptor type is always zero
2937 rx_ctx
.hsplit_0
= 0;
2939 rx_ctx
.rxmax
= min_t(u16
, vsi
->max_frame
, chain_len
* ring
->rx_buf_len
);
2940 if (hw
->revision_id
== 0)
2941 rx_ctx
.lrxqthresh
= 0;
2943 rx_ctx
.lrxqthresh
= 2;
2944 rx_ctx
.crcstrip
= 1;
2946 /* this controls whether VLAN is stripped from inner headers */
2949 rx_ctx
.fc_ena
= (vsi
->type
== I40E_VSI_FCOE
);
2951 /* set the prefena field to 1 because the manual says to */
2954 /* clear the context in the HMC */
2955 err
= i40e_clear_lan_rx_queue_context(hw
, pf_q
);
2957 dev_info(&vsi
->back
->pdev
->dev
,
2958 "Failed to clear LAN Rx queue context on Rx ring %d (pf_q %d), error: %d\n",
2959 ring
->queue_index
, pf_q
, err
);
2963 /* set the context in the HMC */
2964 err
= i40e_set_lan_rx_queue_context(hw
, pf_q
, &rx_ctx
);
2966 dev_info(&vsi
->back
->pdev
->dev
,
2967 "Failed to set LAN Rx queue context on Rx ring %d (pf_q %d), error: %d\n",
2968 ring
->queue_index
, pf_q
, err
);
2972 /* cache tail for quicker writes, and clear the reg before use */
2973 ring
->tail
= hw
->hw_addr
+ I40E_QRX_TAIL(pf_q
);
2974 writel(0, ring
->tail
);
2976 i40e_alloc_rx_buffers(ring
, I40E_DESC_UNUSED(ring
));
2982 * i40e_vsi_configure_tx - Configure the VSI for Tx
2983 * @vsi: VSI structure describing this set of rings and resources
2985 * Configure the Tx VSI for operation.
2987 static int i40e_vsi_configure_tx(struct i40e_vsi
*vsi
)
2992 for (i
= 0; (i
< vsi
->num_queue_pairs
) && !err
; i
++)
2993 err
= i40e_configure_tx_ring(vsi
->tx_rings
[i
]);
2999 * i40e_vsi_configure_rx - Configure the VSI for Rx
3000 * @vsi: the VSI being configured
3002 * Configure the Rx VSI for operation.
3004 static int i40e_vsi_configure_rx(struct i40e_vsi
*vsi
)
3009 if (vsi
->netdev
&& (vsi
->netdev
->mtu
> ETH_DATA_LEN
))
3010 vsi
->max_frame
= vsi
->netdev
->mtu
+ ETH_HLEN
3011 + ETH_FCS_LEN
+ VLAN_HLEN
;
3013 vsi
->max_frame
= I40E_RXBUFFER_2048
;
3015 vsi
->rx_buf_len
= I40E_RXBUFFER_2048
;
3018 /* setup rx buffer for FCoE */
3019 if ((vsi
->type
== I40E_VSI_FCOE
) &&
3020 (vsi
->back
->flags
& I40E_FLAG_FCOE_ENABLED
)) {
3021 vsi
->rx_buf_len
= I40E_RXBUFFER_3072
;
3022 vsi
->max_frame
= I40E_RXBUFFER_3072
;
3025 #endif /* I40E_FCOE */
3026 /* round up for the chip's needs */
3027 vsi
->rx_buf_len
= ALIGN(vsi
->rx_buf_len
,
3028 BIT_ULL(I40E_RXQ_CTX_DBUFF_SHIFT
));
3030 /* set up individual rings */
3031 for (i
= 0; i
< vsi
->num_queue_pairs
&& !err
; i
++)
3032 err
= i40e_configure_rx_ring(vsi
->rx_rings
[i
]);
3038 * i40e_vsi_config_dcb_rings - Update rings to reflect DCB TC
3039 * @vsi: ptr to the VSI
3041 static void i40e_vsi_config_dcb_rings(struct i40e_vsi
*vsi
)
3043 struct i40e_ring
*tx_ring
, *rx_ring
;
3044 u16 qoffset
, qcount
;
3047 if (!(vsi
->back
->flags
& I40E_FLAG_DCB_ENABLED
)) {
3048 /* Reset the TC information */
3049 for (i
= 0; i
< vsi
->num_queue_pairs
; i
++) {
3050 rx_ring
= vsi
->rx_rings
[i
];
3051 tx_ring
= vsi
->tx_rings
[i
];
3052 rx_ring
->dcb_tc
= 0;
3053 tx_ring
->dcb_tc
= 0;
3057 for (n
= 0; n
< I40E_MAX_TRAFFIC_CLASS
; n
++) {
3058 if (!(vsi
->tc_config
.enabled_tc
& BIT_ULL(n
)))
3061 qoffset
= vsi
->tc_config
.tc_info
[n
].qoffset
;
3062 qcount
= vsi
->tc_config
.tc_info
[n
].qcount
;
3063 for (i
= qoffset
; i
< (qoffset
+ qcount
); i
++) {
3064 rx_ring
= vsi
->rx_rings
[i
];
3065 tx_ring
= vsi
->tx_rings
[i
];
3066 rx_ring
->dcb_tc
= n
;
3067 tx_ring
->dcb_tc
= n
;
3073 * i40e_set_vsi_rx_mode - Call set_rx_mode on a VSI
3074 * @vsi: ptr to the VSI
3076 static void i40e_set_vsi_rx_mode(struct i40e_vsi
*vsi
)
3078 struct i40e_pf
*pf
= vsi
->back
;
3082 i40e_set_rx_mode(vsi
->netdev
);
3084 if (!!(pf
->flags
& I40E_FLAG_PF_MAC
)) {
3085 err
= i40e_macaddr_init(vsi
, pf
->hw
.mac
.addr
);
3087 dev_warn(&pf
->pdev
->dev
,
3088 "could not set up macaddr; err %d\n", err
);
3094 * i40e_fdir_filter_restore - Restore the Sideband Flow Director filters
3095 * @vsi: Pointer to the targeted VSI
3097 * This function replays the hlist on the hw where all the SB Flow Director
3098 * filters were saved.
3100 static void i40e_fdir_filter_restore(struct i40e_vsi
*vsi
)
3102 struct i40e_fdir_filter
*filter
;
3103 struct i40e_pf
*pf
= vsi
->back
;
3104 struct hlist_node
*node
;
3106 if (!(pf
->flags
& I40E_FLAG_FD_SB_ENABLED
))
3109 hlist_for_each_entry_safe(filter
, node
,
3110 &pf
->fdir_filter_list
, fdir_node
) {
3111 i40e_add_del_fdir(vsi
, filter
, true);
3116 * i40e_vsi_configure - Set up the VSI for action
3117 * @vsi: the VSI being configured
3119 static int i40e_vsi_configure(struct i40e_vsi
*vsi
)
3123 i40e_set_vsi_rx_mode(vsi
);
3124 i40e_restore_vlan(vsi
);
3125 i40e_vsi_config_dcb_rings(vsi
);
3126 err
= i40e_vsi_configure_tx(vsi
);
3128 err
= i40e_vsi_configure_rx(vsi
);
3134 * i40e_vsi_configure_msix - MSIX mode Interrupt Config in the HW
3135 * @vsi: the VSI being configured
3137 static void i40e_vsi_configure_msix(struct i40e_vsi
*vsi
)
3139 struct i40e_pf
*pf
= vsi
->back
;
3140 struct i40e_hw
*hw
= &pf
->hw
;
3145 /* The interrupt indexing is offset by 1 in the PFINT_ITRn
3146 * and PFINT_LNKLSTn registers, e.g.:
3147 * PFINT_ITRn[0..n-1] gets msix-1..msix-n (qpair interrupts)
3149 qp
= vsi
->base_queue
;
3150 vector
= vsi
->base_vector
;
3151 for (i
= 0; i
< vsi
->num_q_vectors
; i
++, vector
++) {
3152 struct i40e_q_vector
*q_vector
= vsi
->q_vectors
[i
];
3154 q_vector
->itr_countdown
= ITR_COUNTDOWN_START
;
3155 q_vector
->rx
.itr
= ITR_TO_REG(vsi
->rx_rings
[i
]->rx_itr_setting
);
3156 q_vector
->rx
.latency_range
= I40E_LOW_LATENCY
;
3157 wr32(hw
, I40E_PFINT_ITRN(I40E_RX_ITR
, vector
- 1),
3159 q_vector
->tx
.itr
= ITR_TO_REG(vsi
->tx_rings
[i
]->tx_itr_setting
);
3160 q_vector
->tx
.latency_range
= I40E_LOW_LATENCY
;
3161 wr32(hw
, I40E_PFINT_ITRN(I40E_TX_ITR
, vector
- 1),
3163 wr32(hw
, I40E_PFINT_RATEN(vector
- 1),
3164 INTRL_USEC_TO_REG(vsi
->int_rate_limit
));
3166 /* Linked list for the queuepairs assigned to this vector */
3167 wr32(hw
, I40E_PFINT_LNKLSTN(vector
- 1), qp
);
3168 for (q
= 0; q
< q_vector
->num_ringpairs
; q
++) {
3171 val
= I40E_QINT_RQCTL_CAUSE_ENA_MASK
|
3172 (I40E_RX_ITR
<< I40E_QINT_RQCTL_ITR_INDX_SHIFT
) |
3173 (vector
<< I40E_QINT_RQCTL_MSIX_INDX_SHIFT
) |
3174 (qp
<< I40E_QINT_RQCTL_NEXTQ_INDX_SHIFT
)|
3176 << I40E_QINT_RQCTL_NEXTQ_TYPE_SHIFT
);
3178 wr32(hw
, I40E_QINT_RQCTL(qp
), val
);
3180 val
= I40E_QINT_TQCTL_CAUSE_ENA_MASK
|
3181 (I40E_TX_ITR
<< I40E_QINT_TQCTL_ITR_INDX_SHIFT
) |
3182 (vector
<< I40E_QINT_TQCTL_MSIX_INDX_SHIFT
) |
3183 ((qp
+1) << I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT
)|
3185 << I40E_QINT_TQCTL_NEXTQ_TYPE_SHIFT
);
3187 /* Terminate the linked list */
3188 if (q
== (q_vector
->num_ringpairs
- 1))
3189 val
|= (I40E_QUEUE_END_OF_LIST
3190 << I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT
);
3192 wr32(hw
, I40E_QINT_TQCTL(qp
), val
);
3201 * i40e_enable_misc_int_causes - enable the non-queue interrupts
3202 * @hw: ptr to the hardware info
3204 static void i40e_enable_misc_int_causes(struct i40e_pf
*pf
)
3206 struct i40e_hw
*hw
= &pf
->hw
;
3209 /* clear things first */
3210 wr32(hw
, I40E_PFINT_ICR0_ENA
, 0); /* disable all */
3211 rd32(hw
, I40E_PFINT_ICR0
); /* read to clear */
3213 val
= I40E_PFINT_ICR0_ENA_ECC_ERR_MASK
|
3214 I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK
|
3215 I40E_PFINT_ICR0_ENA_GRST_MASK
|
3216 I40E_PFINT_ICR0_ENA_PCI_EXCEPTION_MASK
|
3217 I40E_PFINT_ICR0_ENA_GPIO_MASK
|
3218 I40E_PFINT_ICR0_ENA_HMC_ERR_MASK
|
3219 I40E_PFINT_ICR0_ENA_VFLR_MASK
|
3220 I40E_PFINT_ICR0_ENA_ADMINQ_MASK
;
3222 if (pf
->flags
& I40E_FLAG_IWARP_ENABLED
)
3223 val
|= I40E_PFINT_ICR0_ENA_PE_CRITERR_MASK
;
3225 if (pf
->flags
& I40E_FLAG_PTP
)
3226 val
|= I40E_PFINT_ICR0_ENA_TIMESYNC_MASK
;
3228 wr32(hw
, I40E_PFINT_ICR0_ENA
, val
);
3230 /* SW_ITR_IDX = 0, but don't change INTENA */
3231 wr32(hw
, I40E_PFINT_DYN_CTL0
, I40E_PFINT_DYN_CTL0_SW_ITR_INDX_MASK
|
3232 I40E_PFINT_DYN_CTL0_INTENA_MSK_MASK
);
3234 /* OTHER_ITR_IDX = 0 */
3235 wr32(hw
, I40E_PFINT_STAT_CTL0
, 0);
3239 * i40e_configure_msi_and_legacy - Legacy mode interrupt config in the HW
3240 * @vsi: the VSI being configured
3242 static void i40e_configure_msi_and_legacy(struct i40e_vsi
*vsi
)
3244 struct i40e_q_vector
*q_vector
= vsi
->q_vectors
[0];
3245 struct i40e_pf
*pf
= vsi
->back
;
3246 struct i40e_hw
*hw
= &pf
->hw
;
3249 /* set the ITR configuration */
3250 q_vector
->itr_countdown
= ITR_COUNTDOWN_START
;
3251 q_vector
->rx
.itr
= ITR_TO_REG(vsi
->rx_rings
[0]->rx_itr_setting
);
3252 q_vector
->rx
.latency_range
= I40E_LOW_LATENCY
;
3253 wr32(hw
, I40E_PFINT_ITR0(I40E_RX_ITR
), q_vector
->rx
.itr
);
3254 q_vector
->tx
.itr
= ITR_TO_REG(vsi
->tx_rings
[0]->tx_itr_setting
);
3255 q_vector
->tx
.latency_range
= I40E_LOW_LATENCY
;
3256 wr32(hw
, I40E_PFINT_ITR0(I40E_TX_ITR
), q_vector
->tx
.itr
);
3258 i40e_enable_misc_int_causes(pf
);
3260 /* FIRSTQ_INDX = 0, FIRSTQ_TYPE = 0 (rx) */
3261 wr32(hw
, I40E_PFINT_LNKLST0
, 0);
3263 /* Associate the queue pair to the vector and enable the queue int */
3264 val
= I40E_QINT_RQCTL_CAUSE_ENA_MASK
|
3265 (I40E_RX_ITR
<< I40E_QINT_RQCTL_ITR_INDX_SHIFT
) |
3266 (I40E_QUEUE_TYPE_TX
<< I40E_QINT_TQCTL_NEXTQ_TYPE_SHIFT
);
3268 wr32(hw
, I40E_QINT_RQCTL(0), val
);
3270 val
= I40E_QINT_TQCTL_CAUSE_ENA_MASK
|
3271 (I40E_TX_ITR
<< I40E_QINT_TQCTL_ITR_INDX_SHIFT
) |
3272 (I40E_QUEUE_END_OF_LIST
<< I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT
);
3274 wr32(hw
, I40E_QINT_TQCTL(0), val
);
3279 * i40e_irq_dynamic_disable_icr0 - Disable default interrupt generation for icr0
3280 * @pf: board private structure
3282 void i40e_irq_dynamic_disable_icr0(struct i40e_pf
*pf
)
3284 struct i40e_hw
*hw
= &pf
->hw
;
3286 wr32(hw
, I40E_PFINT_DYN_CTL0
,
3287 I40E_ITR_NONE
<< I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT
);
3292 * i40e_irq_dynamic_enable_icr0 - Enable default interrupt generation for icr0
3293 * @pf: board private structure
3294 * @clearpba: true when all pending interrupt events should be cleared
3296 void i40e_irq_dynamic_enable_icr0(struct i40e_pf
*pf
, bool clearpba
)
3298 struct i40e_hw
*hw
= &pf
->hw
;
3301 val
= I40E_PFINT_DYN_CTL0_INTENA_MASK
|
3302 (clearpba
? I40E_PFINT_DYN_CTL0_CLEARPBA_MASK
: 0) |
3303 (I40E_ITR_NONE
<< I40E_PFINT_DYN_CTL0_ITR_INDX_SHIFT
);
3305 wr32(hw
, I40E_PFINT_DYN_CTL0
, val
);
3310 * i40e_msix_clean_rings - MSIX mode Interrupt Handler
3311 * @irq: interrupt number
3312 * @data: pointer to a q_vector
3314 static irqreturn_t
i40e_msix_clean_rings(int irq
, void *data
)
3316 struct i40e_q_vector
*q_vector
= data
;
3318 if (!q_vector
->tx
.ring
&& !q_vector
->rx
.ring
)
3321 napi_schedule_irqoff(&q_vector
->napi
);
3327 * i40e_vsi_request_irq_msix - Initialize MSI-X interrupts
3328 * @vsi: the VSI being configured
3329 * @basename: name for the vector
3331 * Allocates MSI-X vectors and requests interrupts from the kernel.
3333 static int i40e_vsi_request_irq_msix(struct i40e_vsi
*vsi
, char *basename
)
3335 int q_vectors
= vsi
->num_q_vectors
;
3336 struct i40e_pf
*pf
= vsi
->back
;
3337 int base
= vsi
->base_vector
;
3342 for (vector
= 0; vector
< q_vectors
; vector
++) {
3343 struct i40e_q_vector
*q_vector
= vsi
->q_vectors
[vector
];
3345 if (q_vector
->tx
.ring
&& q_vector
->rx
.ring
) {
3346 snprintf(q_vector
->name
, sizeof(q_vector
->name
) - 1,
3347 "%s-%s-%d", basename
, "TxRx", rx_int_idx
++);
3349 } else if (q_vector
->rx
.ring
) {
3350 snprintf(q_vector
->name
, sizeof(q_vector
->name
) - 1,
3351 "%s-%s-%d", basename
, "rx", rx_int_idx
++);
3352 } else if (q_vector
->tx
.ring
) {
3353 snprintf(q_vector
->name
, sizeof(q_vector
->name
) - 1,
3354 "%s-%s-%d", basename
, "tx", tx_int_idx
++);
3356 /* skip this unused q_vector */
3359 err
= request_irq(pf
->msix_entries
[base
+ vector
].vector
,
3365 dev_info(&pf
->pdev
->dev
,
3366 "MSIX request_irq failed, error: %d\n", err
);
3367 goto free_queue_irqs
;
3369 /* assign the mask for this irq */
3370 irq_set_affinity_hint(pf
->msix_entries
[base
+ vector
].vector
,
3371 &q_vector
->affinity_mask
);
3374 vsi
->irqs_ready
= true;
3380 irq_set_affinity_hint(pf
->msix_entries
[base
+ vector
].vector
,
3382 free_irq(pf
->msix_entries
[base
+ vector
].vector
,
3383 &(vsi
->q_vectors
[vector
]));
3389 * i40e_vsi_disable_irq - Mask off queue interrupt generation on the VSI
3390 * @vsi: the VSI being un-configured
3392 static void i40e_vsi_disable_irq(struct i40e_vsi
*vsi
)
3394 struct i40e_pf
*pf
= vsi
->back
;
3395 struct i40e_hw
*hw
= &pf
->hw
;
3396 int base
= vsi
->base_vector
;
3399 for (i
= 0; i
< vsi
->num_queue_pairs
; i
++) {
3400 wr32(hw
, I40E_QINT_TQCTL(vsi
->tx_rings
[i
]->reg_idx
), 0);
3401 wr32(hw
, I40E_QINT_RQCTL(vsi
->rx_rings
[i
]->reg_idx
), 0);
3404 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
) {
3405 for (i
= vsi
->base_vector
;
3406 i
< (vsi
->num_q_vectors
+ vsi
->base_vector
); i
++)
3407 wr32(hw
, I40E_PFINT_DYN_CTLN(i
- 1), 0);
3410 for (i
= 0; i
< vsi
->num_q_vectors
; i
++)
3411 synchronize_irq(pf
->msix_entries
[i
+ base
].vector
);
3413 /* Legacy and MSI mode - this stops all interrupt handling */
3414 wr32(hw
, I40E_PFINT_ICR0_ENA
, 0);
3415 wr32(hw
, I40E_PFINT_DYN_CTL0
, 0);
3417 synchronize_irq(pf
->pdev
->irq
);
3422 * i40e_vsi_enable_irq - Enable IRQ for the given VSI
3423 * @vsi: the VSI being configured
3425 static int i40e_vsi_enable_irq(struct i40e_vsi
*vsi
)
3427 struct i40e_pf
*pf
= vsi
->back
;
3430 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
) {
3431 for (i
= 0; i
< vsi
->num_q_vectors
; i
++)
3432 i40e_irq_dynamic_enable(vsi
, i
);
3434 i40e_irq_dynamic_enable_icr0(pf
, true);
3437 i40e_flush(&pf
->hw
);
3442 * i40e_stop_misc_vector - Stop the vector that handles non-queue events
3443 * @pf: board private structure
3445 static void i40e_stop_misc_vector(struct i40e_pf
*pf
)
3448 wr32(&pf
->hw
, I40E_PFINT_ICR0_ENA
, 0);
3449 i40e_flush(&pf
->hw
);
3453 * i40e_intr - MSI/Legacy and non-queue interrupt handler
3454 * @irq: interrupt number
3455 * @data: pointer to a q_vector
3457 * This is the handler used for all MSI/Legacy interrupts, and deals
3458 * with both queue and non-queue interrupts. This is also used in
3459 * MSIX mode to handle the non-queue interrupts.
3461 static irqreturn_t
i40e_intr(int irq
, void *data
)
3463 struct i40e_pf
*pf
= (struct i40e_pf
*)data
;
3464 struct i40e_hw
*hw
= &pf
->hw
;
3465 irqreturn_t ret
= IRQ_NONE
;
3466 u32 icr0
, icr0_remaining
;
3469 icr0
= rd32(hw
, I40E_PFINT_ICR0
);
3470 ena_mask
= rd32(hw
, I40E_PFINT_ICR0_ENA
);
3472 /* if sharing a legacy IRQ, we might get called w/o an intr pending */
3473 if ((icr0
& I40E_PFINT_ICR0_INTEVENT_MASK
) == 0)
3476 /* if interrupt but no bits showing, must be SWINT */
3477 if (((icr0
& ~I40E_PFINT_ICR0_INTEVENT_MASK
) == 0) ||
3478 (icr0
& I40E_PFINT_ICR0_SWINT_MASK
))
3481 if ((pf
->flags
& I40E_FLAG_IWARP_ENABLED
) &&
3482 (ena_mask
& I40E_PFINT_ICR0_ENA_PE_CRITERR_MASK
)) {
3483 ena_mask
&= ~I40E_PFINT_ICR0_ENA_PE_CRITERR_MASK
;
3484 icr0
&= ~I40E_PFINT_ICR0_ENA_PE_CRITERR_MASK
;
3485 dev_info(&pf
->pdev
->dev
, "cleared PE_CRITERR\n");
3488 /* only q0 is used in MSI/Legacy mode, and none are used in MSIX */
3489 if (icr0
& I40E_PFINT_ICR0_QUEUE_0_MASK
) {
3490 struct i40e_vsi
*vsi
= pf
->vsi
[pf
->lan_vsi
];
3491 struct i40e_q_vector
*q_vector
= vsi
->q_vectors
[0];
3493 /* We do not have a way to disarm Queue causes while leaving
3494 * interrupt enabled for all other causes, ideally
3495 * interrupt should be disabled while we are in NAPI but
3496 * this is not a performance path and napi_schedule()
3497 * can deal with rescheduling.
3499 if (!test_bit(__I40E_DOWN
, &pf
->state
))
3500 napi_schedule_irqoff(&q_vector
->napi
);
3503 if (icr0
& I40E_PFINT_ICR0_ADMINQ_MASK
) {
3504 ena_mask
&= ~I40E_PFINT_ICR0_ENA_ADMINQ_MASK
;
3505 set_bit(__I40E_ADMINQ_EVENT_PENDING
, &pf
->state
);
3506 i40e_debug(&pf
->hw
, I40E_DEBUG_NVM
, "AdminQ event\n");
3509 if (icr0
& I40E_PFINT_ICR0_MAL_DETECT_MASK
) {
3510 ena_mask
&= ~I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK
;
3511 set_bit(__I40E_MDD_EVENT_PENDING
, &pf
->state
);
3514 if (icr0
& I40E_PFINT_ICR0_VFLR_MASK
) {
3515 ena_mask
&= ~I40E_PFINT_ICR0_ENA_VFLR_MASK
;
3516 set_bit(__I40E_VFLR_EVENT_PENDING
, &pf
->state
);
3519 if (icr0
& I40E_PFINT_ICR0_GRST_MASK
) {
3520 if (!test_bit(__I40E_RESET_RECOVERY_PENDING
, &pf
->state
))
3521 set_bit(__I40E_RESET_INTR_RECEIVED
, &pf
->state
);
3522 ena_mask
&= ~I40E_PFINT_ICR0_ENA_GRST_MASK
;
3523 val
= rd32(hw
, I40E_GLGEN_RSTAT
);
3524 val
= (val
& I40E_GLGEN_RSTAT_RESET_TYPE_MASK
)
3525 >> I40E_GLGEN_RSTAT_RESET_TYPE_SHIFT
;
3526 if (val
== I40E_RESET_CORER
) {
3528 } else if (val
== I40E_RESET_GLOBR
) {
3530 } else if (val
== I40E_RESET_EMPR
) {
3532 set_bit(__I40E_EMP_RESET_INTR_RECEIVED
, &pf
->state
);
3536 if (icr0
& I40E_PFINT_ICR0_HMC_ERR_MASK
) {
3537 icr0
&= ~I40E_PFINT_ICR0_HMC_ERR_MASK
;
3538 dev_info(&pf
->pdev
->dev
, "HMC error interrupt\n");
3539 dev_info(&pf
->pdev
->dev
, "HMC error info 0x%x, HMC error data 0x%x\n",
3540 rd32(hw
, I40E_PFHMC_ERRORINFO
),
3541 rd32(hw
, I40E_PFHMC_ERRORDATA
));
3544 if (icr0
& I40E_PFINT_ICR0_TIMESYNC_MASK
) {
3545 u32 prttsyn_stat
= rd32(hw
, I40E_PRTTSYN_STAT_0
);
3547 if (prttsyn_stat
& I40E_PRTTSYN_STAT_0_TXTIME_MASK
) {
3548 icr0
&= ~I40E_PFINT_ICR0_ENA_TIMESYNC_MASK
;
3549 i40e_ptp_tx_hwtstamp(pf
);
3553 /* If a critical error is pending we have no choice but to reset the
3555 * Report and mask out any remaining unexpected interrupts.
3557 icr0_remaining
= icr0
& ena_mask
;
3558 if (icr0_remaining
) {
3559 dev_info(&pf
->pdev
->dev
, "unhandled interrupt icr0=0x%08x\n",
3561 if ((icr0_remaining
& I40E_PFINT_ICR0_PE_CRITERR_MASK
) ||
3562 (icr0_remaining
& I40E_PFINT_ICR0_PCI_EXCEPTION_MASK
) ||
3563 (icr0_remaining
& I40E_PFINT_ICR0_ECC_ERR_MASK
)) {
3564 dev_info(&pf
->pdev
->dev
, "device will be reset\n");
3565 set_bit(__I40E_PF_RESET_REQUESTED
, &pf
->state
);
3566 i40e_service_event_schedule(pf
);
3568 ena_mask
&= ~icr0_remaining
;
3573 /* re-enable interrupt causes */
3574 wr32(hw
, I40E_PFINT_ICR0_ENA
, ena_mask
);
3575 if (!test_bit(__I40E_DOWN
, &pf
->state
)) {
3576 i40e_service_event_schedule(pf
);
3577 i40e_irq_dynamic_enable_icr0(pf
, false);
3584 * i40e_clean_fdir_tx_irq - Reclaim resources after transmit completes
3585 * @tx_ring: tx ring to clean
3586 * @budget: how many cleans we're allowed
3588 * Returns true if there's any budget left (e.g. the clean is finished)
3590 static bool i40e_clean_fdir_tx_irq(struct i40e_ring
*tx_ring
, int budget
)
3592 struct i40e_vsi
*vsi
= tx_ring
->vsi
;
3593 u16 i
= tx_ring
->next_to_clean
;
3594 struct i40e_tx_buffer
*tx_buf
;
3595 struct i40e_tx_desc
*tx_desc
;
3597 tx_buf
= &tx_ring
->tx_bi
[i
];
3598 tx_desc
= I40E_TX_DESC(tx_ring
, i
);
3599 i
-= tx_ring
->count
;
3602 struct i40e_tx_desc
*eop_desc
= tx_buf
->next_to_watch
;
3604 /* if next_to_watch is not set then there is no work pending */
3608 /* prevent any other reads prior to eop_desc */
3609 read_barrier_depends();
3611 /* if the descriptor isn't done, no work yet to do */
3612 if (!(eop_desc
->cmd_type_offset_bsz
&
3613 cpu_to_le64(I40E_TX_DESC_DTYPE_DESC_DONE
)))
3616 /* clear next_to_watch to prevent false hangs */
3617 tx_buf
->next_to_watch
= NULL
;
3619 tx_desc
->buffer_addr
= 0;
3620 tx_desc
->cmd_type_offset_bsz
= 0;
3621 /* move past filter desc */
3626 i
-= tx_ring
->count
;
3627 tx_buf
= tx_ring
->tx_bi
;
3628 tx_desc
= I40E_TX_DESC(tx_ring
, 0);
3630 /* unmap skb header data */
3631 dma_unmap_single(tx_ring
->dev
,
3632 dma_unmap_addr(tx_buf
, dma
),
3633 dma_unmap_len(tx_buf
, len
),
3635 if (tx_buf
->tx_flags
& I40E_TX_FLAGS_FD_SB
)
3636 kfree(tx_buf
->raw_buf
);
3638 tx_buf
->raw_buf
= NULL
;
3639 tx_buf
->tx_flags
= 0;
3640 tx_buf
->next_to_watch
= NULL
;
3641 dma_unmap_len_set(tx_buf
, len
, 0);
3642 tx_desc
->buffer_addr
= 0;
3643 tx_desc
->cmd_type_offset_bsz
= 0;
3645 /* move us past the eop_desc for start of next FD desc */
3650 i
-= tx_ring
->count
;
3651 tx_buf
= tx_ring
->tx_bi
;
3652 tx_desc
= I40E_TX_DESC(tx_ring
, 0);
3655 /* update budget accounting */
3657 } while (likely(budget
));
3659 i
+= tx_ring
->count
;
3660 tx_ring
->next_to_clean
= i
;
3662 if (vsi
->back
->flags
& I40E_FLAG_MSIX_ENABLED
)
3663 i40e_irq_dynamic_enable(vsi
, tx_ring
->q_vector
->v_idx
);
3669 * i40e_fdir_clean_ring - Interrupt Handler for FDIR SB ring
3670 * @irq: interrupt number
3671 * @data: pointer to a q_vector
3673 static irqreturn_t
i40e_fdir_clean_ring(int irq
, void *data
)
3675 struct i40e_q_vector
*q_vector
= data
;
3676 struct i40e_vsi
*vsi
;
3678 if (!q_vector
->tx
.ring
)
3681 vsi
= q_vector
->tx
.ring
->vsi
;
3682 i40e_clean_fdir_tx_irq(q_vector
->tx
.ring
, vsi
->work_limit
);
3688 * i40e_map_vector_to_qp - Assigns the queue pair to the vector
3689 * @vsi: the VSI being configured
3690 * @v_idx: vector index
3691 * @qp_idx: queue pair index
3693 static void i40e_map_vector_to_qp(struct i40e_vsi
*vsi
, int v_idx
, int qp_idx
)
3695 struct i40e_q_vector
*q_vector
= vsi
->q_vectors
[v_idx
];
3696 struct i40e_ring
*tx_ring
= vsi
->tx_rings
[qp_idx
];
3697 struct i40e_ring
*rx_ring
= vsi
->rx_rings
[qp_idx
];
3699 tx_ring
->q_vector
= q_vector
;
3700 tx_ring
->next
= q_vector
->tx
.ring
;
3701 q_vector
->tx
.ring
= tx_ring
;
3702 q_vector
->tx
.count
++;
3704 rx_ring
->q_vector
= q_vector
;
3705 rx_ring
->next
= q_vector
->rx
.ring
;
3706 q_vector
->rx
.ring
= rx_ring
;
3707 q_vector
->rx
.count
++;
3711 * i40e_vsi_map_rings_to_vectors - Maps descriptor rings to vectors
3712 * @vsi: the VSI being configured
3714 * This function maps descriptor rings to the queue-specific vectors
3715 * we were allotted through the MSI-X enabling code. Ideally, we'd have
3716 * one vector per queue pair, but on a constrained vector budget, we
3717 * group the queue pairs as "efficiently" as possible.
3719 static void i40e_vsi_map_rings_to_vectors(struct i40e_vsi
*vsi
)
3721 int qp_remaining
= vsi
->num_queue_pairs
;
3722 int q_vectors
= vsi
->num_q_vectors
;
3727 /* If we don't have enough vectors for a 1-to-1 mapping, we'll have to
3728 * group them so there are multiple queues per vector.
3729 * It is also important to go through all the vectors available to be
3730 * sure that if we don't use all the vectors, that the remaining vectors
3731 * are cleared. This is especially important when decreasing the
3732 * number of queues in use.
3734 for (; v_start
< q_vectors
; v_start
++) {
3735 struct i40e_q_vector
*q_vector
= vsi
->q_vectors
[v_start
];
3737 num_ringpairs
= DIV_ROUND_UP(qp_remaining
, q_vectors
- v_start
);
3739 q_vector
->num_ringpairs
= num_ringpairs
;
3741 q_vector
->rx
.count
= 0;
3742 q_vector
->tx
.count
= 0;
3743 q_vector
->rx
.ring
= NULL
;
3744 q_vector
->tx
.ring
= NULL
;
3746 while (num_ringpairs
--) {
3747 i40e_map_vector_to_qp(vsi
, v_start
, qp_idx
);
3755 * i40e_vsi_request_irq - Request IRQ from the OS
3756 * @vsi: the VSI being configured
3757 * @basename: name for the vector
3759 static int i40e_vsi_request_irq(struct i40e_vsi
*vsi
, char *basename
)
3761 struct i40e_pf
*pf
= vsi
->back
;
3764 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
)
3765 err
= i40e_vsi_request_irq_msix(vsi
, basename
);
3766 else if (pf
->flags
& I40E_FLAG_MSI_ENABLED
)
3767 err
= request_irq(pf
->pdev
->irq
, i40e_intr
, 0,
3770 err
= request_irq(pf
->pdev
->irq
, i40e_intr
, IRQF_SHARED
,
3774 dev_info(&pf
->pdev
->dev
, "request_irq failed, Error %d\n", err
);
3779 #ifdef CONFIG_NET_POLL_CONTROLLER
3781 * i40e_netpoll - A Polling 'interrupt' handler
3782 * @netdev: network interface device structure
3784 * This is used by netconsole to send skbs without having to re-enable
3785 * interrupts. It's not called while the normal interrupt routine is executing.
3788 void i40e_netpoll(struct net_device
*netdev
)
3790 static void i40e_netpoll(struct net_device
*netdev
)
3793 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
3794 struct i40e_vsi
*vsi
= np
->vsi
;
3795 struct i40e_pf
*pf
= vsi
->back
;
3798 /* if interface is down do nothing */
3799 if (test_bit(__I40E_DOWN
, &vsi
->state
))
3802 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
) {
3803 for (i
= 0; i
< vsi
->num_q_vectors
; i
++)
3804 i40e_msix_clean_rings(0, vsi
->q_vectors
[i
]);
3806 i40e_intr(pf
->pdev
->irq
, netdev
);
3812 * i40e_pf_txq_wait - Wait for a PF's Tx queue to be enabled or disabled
3813 * @pf: the PF being configured
3814 * @pf_q: the PF queue
3815 * @enable: enable or disable state of the queue
3817 * This routine will wait for the given Tx queue of the PF to reach the
3818 * enabled or disabled state.
3819 * Returns -ETIMEDOUT in case of failing to reach the requested state after
3820 * multiple retries; else will return 0 in case of success.
3822 static int i40e_pf_txq_wait(struct i40e_pf
*pf
, int pf_q
, bool enable
)
3827 for (i
= 0; i
< I40E_QUEUE_WAIT_RETRY_LIMIT
; i
++) {
3828 tx_reg
= rd32(&pf
->hw
, I40E_QTX_ENA(pf_q
));
3829 if (enable
== !!(tx_reg
& I40E_QTX_ENA_QENA_STAT_MASK
))
3832 usleep_range(10, 20);
3834 if (i
>= I40E_QUEUE_WAIT_RETRY_LIMIT
)
3841 * i40e_vsi_control_tx - Start or stop a VSI's rings
3842 * @vsi: the VSI being configured
3843 * @enable: start or stop the rings
3845 static int i40e_vsi_control_tx(struct i40e_vsi
*vsi
, bool enable
)
3847 struct i40e_pf
*pf
= vsi
->back
;
3848 struct i40e_hw
*hw
= &pf
->hw
;
3849 int i
, j
, pf_q
, ret
= 0;
3852 pf_q
= vsi
->base_queue
;
3853 for (i
= 0; i
< vsi
->num_queue_pairs
; i
++, pf_q
++) {
3855 /* warn the TX unit of coming changes */
3856 i40e_pre_tx_queue_cfg(&pf
->hw
, pf_q
, enable
);
3858 usleep_range(10, 20);
3860 for (j
= 0; j
< 50; j
++) {
3861 tx_reg
= rd32(hw
, I40E_QTX_ENA(pf_q
));
3862 if (((tx_reg
>> I40E_QTX_ENA_QENA_REQ_SHIFT
) & 1) ==
3863 ((tx_reg
>> I40E_QTX_ENA_QENA_STAT_SHIFT
) & 1))
3865 usleep_range(1000, 2000);
3867 /* Skip if the queue is already in the requested state */
3868 if (enable
== !!(tx_reg
& I40E_QTX_ENA_QENA_STAT_MASK
))
3871 /* turn on/off the queue */
3873 wr32(hw
, I40E_QTX_HEAD(pf_q
), 0);
3874 tx_reg
|= I40E_QTX_ENA_QENA_REQ_MASK
;
3876 tx_reg
&= ~I40E_QTX_ENA_QENA_REQ_MASK
;
3879 wr32(hw
, I40E_QTX_ENA(pf_q
), tx_reg
);
3880 /* No waiting for the Tx queue to disable */
3881 if (!enable
&& test_bit(__I40E_PORT_TX_SUSPENDED
, &pf
->state
))
3884 /* wait for the change to finish */
3885 ret
= i40e_pf_txq_wait(pf
, pf_q
, enable
);
3887 dev_info(&pf
->pdev
->dev
,
3888 "VSI seid %d Tx ring %d %sable timeout\n",
3889 vsi
->seid
, pf_q
, (enable
? "en" : "dis"));
3894 if (hw
->revision_id
== 0)
3900 * i40e_pf_rxq_wait - Wait for a PF's Rx queue to be enabled or disabled
3901 * @pf: the PF being configured
3902 * @pf_q: the PF queue
3903 * @enable: enable or disable state of the queue
3905 * This routine will wait for the given Rx queue of the PF to reach the
3906 * enabled or disabled state.
3907 * Returns -ETIMEDOUT in case of failing to reach the requested state after
3908 * multiple retries; else will return 0 in case of success.
3910 static int i40e_pf_rxq_wait(struct i40e_pf
*pf
, int pf_q
, bool enable
)
3915 for (i
= 0; i
< I40E_QUEUE_WAIT_RETRY_LIMIT
; i
++) {
3916 rx_reg
= rd32(&pf
->hw
, I40E_QRX_ENA(pf_q
));
3917 if (enable
== !!(rx_reg
& I40E_QRX_ENA_QENA_STAT_MASK
))
3920 usleep_range(10, 20);
3922 if (i
>= I40E_QUEUE_WAIT_RETRY_LIMIT
)
3929 * i40e_vsi_control_rx - Start or stop a VSI's rings
3930 * @vsi: the VSI being configured
3931 * @enable: start or stop the rings
3933 static int i40e_vsi_control_rx(struct i40e_vsi
*vsi
, bool enable
)
3935 struct i40e_pf
*pf
= vsi
->back
;
3936 struct i40e_hw
*hw
= &pf
->hw
;
3937 int i
, j
, pf_q
, ret
= 0;
3940 pf_q
= vsi
->base_queue
;
3941 for (i
= 0; i
< vsi
->num_queue_pairs
; i
++, pf_q
++) {
3942 for (j
= 0; j
< 50; j
++) {
3943 rx_reg
= rd32(hw
, I40E_QRX_ENA(pf_q
));
3944 if (((rx_reg
>> I40E_QRX_ENA_QENA_REQ_SHIFT
) & 1) ==
3945 ((rx_reg
>> I40E_QRX_ENA_QENA_STAT_SHIFT
) & 1))
3947 usleep_range(1000, 2000);
3950 /* Skip if the queue is already in the requested state */
3951 if (enable
== !!(rx_reg
& I40E_QRX_ENA_QENA_STAT_MASK
))
3954 /* turn on/off the queue */
3956 rx_reg
|= I40E_QRX_ENA_QENA_REQ_MASK
;
3958 rx_reg
&= ~I40E_QRX_ENA_QENA_REQ_MASK
;
3959 wr32(hw
, I40E_QRX_ENA(pf_q
), rx_reg
);
3960 /* No waiting for the Tx queue to disable */
3961 if (!enable
&& test_bit(__I40E_PORT_TX_SUSPENDED
, &pf
->state
))
3964 /* wait for the change to finish */
3965 ret
= i40e_pf_rxq_wait(pf
, pf_q
, enable
);
3967 dev_info(&pf
->pdev
->dev
,
3968 "VSI seid %d Rx ring %d %sable timeout\n",
3969 vsi
->seid
, pf_q
, (enable
? "en" : "dis"));
3978 * i40e_vsi_control_rings - Start or stop a VSI's rings
3979 * @vsi: the VSI being configured
3980 * @enable: start or stop the rings
3982 int i40e_vsi_control_rings(struct i40e_vsi
*vsi
, bool request
)
3986 /* do rx first for enable and last for disable */
3988 ret
= i40e_vsi_control_rx(vsi
, request
);
3991 ret
= i40e_vsi_control_tx(vsi
, request
);
3993 /* Ignore return value, we need to shutdown whatever we can */
3994 i40e_vsi_control_tx(vsi
, request
);
3995 i40e_vsi_control_rx(vsi
, request
);
4002 * i40e_vsi_free_irq - Free the irq association with the OS
4003 * @vsi: the VSI being configured
4005 static void i40e_vsi_free_irq(struct i40e_vsi
*vsi
)
4007 struct i40e_pf
*pf
= vsi
->back
;
4008 struct i40e_hw
*hw
= &pf
->hw
;
4009 int base
= vsi
->base_vector
;
4013 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
) {
4014 if (!vsi
->q_vectors
)
4017 if (!vsi
->irqs_ready
)
4020 vsi
->irqs_ready
= false;
4021 for (i
= 0; i
< vsi
->num_q_vectors
; i
++) {
4022 u16 vector
= i
+ base
;
4024 /* free only the irqs that were actually requested */
4025 if (!vsi
->q_vectors
[i
] ||
4026 !vsi
->q_vectors
[i
]->num_ringpairs
)
4029 /* clear the affinity_mask in the IRQ descriptor */
4030 irq_set_affinity_hint(pf
->msix_entries
[vector
].vector
,
4032 synchronize_irq(pf
->msix_entries
[vector
].vector
);
4033 free_irq(pf
->msix_entries
[vector
].vector
,
4036 /* Tear down the interrupt queue link list
4038 * We know that they come in pairs and always
4039 * the Rx first, then the Tx. To clear the
4040 * link list, stick the EOL value into the
4041 * next_q field of the registers.
4043 val
= rd32(hw
, I40E_PFINT_LNKLSTN(vector
- 1));
4044 qp
= (val
& I40E_PFINT_LNKLSTN_FIRSTQ_INDX_MASK
)
4045 >> I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT
;
4046 val
|= I40E_QUEUE_END_OF_LIST
4047 << I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT
;
4048 wr32(hw
, I40E_PFINT_LNKLSTN(vector
- 1), val
);
4050 while (qp
!= I40E_QUEUE_END_OF_LIST
) {
4053 val
= rd32(hw
, I40E_QINT_RQCTL(qp
));
4055 val
&= ~(I40E_QINT_RQCTL_MSIX_INDX_MASK
|
4056 I40E_QINT_RQCTL_MSIX0_INDX_MASK
|
4057 I40E_QINT_RQCTL_CAUSE_ENA_MASK
|
4058 I40E_QINT_RQCTL_INTEVENT_MASK
);
4060 val
|= (I40E_QINT_RQCTL_ITR_INDX_MASK
|
4061 I40E_QINT_RQCTL_NEXTQ_INDX_MASK
);
4063 wr32(hw
, I40E_QINT_RQCTL(qp
), val
);
4065 val
= rd32(hw
, I40E_QINT_TQCTL(qp
));
4067 next
= (val
& I40E_QINT_TQCTL_NEXTQ_INDX_MASK
)
4068 >> I40E_QINT_TQCTL_NEXTQ_INDX_SHIFT
;
4070 val
&= ~(I40E_QINT_TQCTL_MSIX_INDX_MASK
|
4071 I40E_QINT_TQCTL_MSIX0_INDX_MASK
|
4072 I40E_QINT_TQCTL_CAUSE_ENA_MASK
|
4073 I40E_QINT_TQCTL_INTEVENT_MASK
);
4075 val
|= (I40E_QINT_TQCTL_ITR_INDX_MASK
|
4076 I40E_QINT_TQCTL_NEXTQ_INDX_MASK
);
4078 wr32(hw
, I40E_QINT_TQCTL(qp
), val
);
4083 free_irq(pf
->pdev
->irq
, pf
);
4085 val
= rd32(hw
, I40E_PFINT_LNKLST0
);
4086 qp
= (val
& I40E_PFINT_LNKLSTN_FIRSTQ_INDX_MASK
)
4087 >> I40E_PFINT_LNKLSTN_FIRSTQ_INDX_SHIFT
;
4088 val
|= I40E_QUEUE_END_OF_LIST
4089 << I40E_PFINT_LNKLST0_FIRSTQ_INDX_SHIFT
;
4090 wr32(hw
, I40E_PFINT_LNKLST0
, val
);
4092 val
= rd32(hw
, I40E_QINT_RQCTL(qp
));
4093 val
&= ~(I40E_QINT_RQCTL_MSIX_INDX_MASK
|
4094 I40E_QINT_RQCTL_MSIX0_INDX_MASK
|
4095 I40E_QINT_RQCTL_CAUSE_ENA_MASK
|
4096 I40E_QINT_RQCTL_INTEVENT_MASK
);
4098 val
|= (I40E_QINT_RQCTL_ITR_INDX_MASK
|
4099 I40E_QINT_RQCTL_NEXTQ_INDX_MASK
);
4101 wr32(hw
, I40E_QINT_RQCTL(qp
), val
);
4103 val
= rd32(hw
, I40E_QINT_TQCTL(qp
));
4105 val
&= ~(I40E_QINT_TQCTL_MSIX_INDX_MASK
|
4106 I40E_QINT_TQCTL_MSIX0_INDX_MASK
|
4107 I40E_QINT_TQCTL_CAUSE_ENA_MASK
|
4108 I40E_QINT_TQCTL_INTEVENT_MASK
);
4110 val
|= (I40E_QINT_TQCTL_ITR_INDX_MASK
|
4111 I40E_QINT_TQCTL_NEXTQ_INDX_MASK
);
4113 wr32(hw
, I40E_QINT_TQCTL(qp
), val
);
4118 * i40e_free_q_vector - Free memory allocated for specific interrupt vector
4119 * @vsi: the VSI being configured
4120 * @v_idx: Index of vector to be freed
4122 * This function frees the memory allocated to the q_vector. In addition if
4123 * NAPI is enabled it will delete any references to the NAPI struct prior
4124 * to freeing the q_vector.
4126 static void i40e_free_q_vector(struct i40e_vsi
*vsi
, int v_idx
)
4128 struct i40e_q_vector
*q_vector
= vsi
->q_vectors
[v_idx
];
4129 struct i40e_ring
*ring
;
4134 /* disassociate q_vector from rings */
4135 i40e_for_each_ring(ring
, q_vector
->tx
)
4136 ring
->q_vector
= NULL
;
4138 i40e_for_each_ring(ring
, q_vector
->rx
)
4139 ring
->q_vector
= NULL
;
4141 /* only VSI w/ an associated netdev is set up w/ NAPI */
4143 netif_napi_del(&q_vector
->napi
);
4145 vsi
->q_vectors
[v_idx
] = NULL
;
4147 kfree_rcu(q_vector
, rcu
);
4151 * i40e_vsi_free_q_vectors - Free memory allocated for interrupt vectors
4152 * @vsi: the VSI being un-configured
4154 * This frees the memory allocated to the q_vectors and
4155 * deletes references to the NAPI struct.
4157 static void i40e_vsi_free_q_vectors(struct i40e_vsi
*vsi
)
4161 for (v_idx
= 0; v_idx
< vsi
->num_q_vectors
; v_idx
++)
4162 i40e_free_q_vector(vsi
, v_idx
);
4166 * i40e_reset_interrupt_capability - Disable interrupt setup in OS
4167 * @pf: board private structure
4169 static void i40e_reset_interrupt_capability(struct i40e_pf
*pf
)
4171 /* If we're in Legacy mode, the interrupt was cleaned in vsi_close */
4172 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
) {
4173 pci_disable_msix(pf
->pdev
);
4174 kfree(pf
->msix_entries
);
4175 pf
->msix_entries
= NULL
;
4176 kfree(pf
->irq_pile
);
4177 pf
->irq_pile
= NULL
;
4178 } else if (pf
->flags
& I40E_FLAG_MSI_ENABLED
) {
4179 pci_disable_msi(pf
->pdev
);
4181 pf
->flags
&= ~(I40E_FLAG_MSIX_ENABLED
| I40E_FLAG_MSI_ENABLED
);
4185 * i40e_clear_interrupt_scheme - Clear the current interrupt scheme settings
4186 * @pf: board private structure
4188 * We go through and clear interrupt specific resources and reset the structure
4189 * to pre-load conditions
4191 static void i40e_clear_interrupt_scheme(struct i40e_pf
*pf
)
4195 i40e_stop_misc_vector(pf
);
4196 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
&& pf
->msix_entries
) {
4197 synchronize_irq(pf
->msix_entries
[0].vector
);
4198 free_irq(pf
->msix_entries
[0].vector
, pf
);
4201 i40e_put_lump(pf
->irq_pile
, pf
->iwarp_base_vector
,
4202 I40E_IWARP_IRQ_PILE_ID
);
4204 i40e_put_lump(pf
->irq_pile
, 0, I40E_PILE_VALID_BIT
-1);
4205 for (i
= 0; i
< pf
->num_alloc_vsi
; i
++)
4207 i40e_vsi_free_q_vectors(pf
->vsi
[i
]);
4208 i40e_reset_interrupt_capability(pf
);
4212 * i40e_napi_enable_all - Enable NAPI for all q_vectors in the VSI
4213 * @vsi: the VSI being configured
4215 static void i40e_napi_enable_all(struct i40e_vsi
*vsi
)
4222 for (q_idx
= 0; q_idx
< vsi
->num_q_vectors
; q_idx
++)
4223 napi_enable(&vsi
->q_vectors
[q_idx
]->napi
);
4227 * i40e_napi_disable_all - Disable NAPI for all q_vectors in the VSI
4228 * @vsi: the VSI being configured
4230 static void i40e_napi_disable_all(struct i40e_vsi
*vsi
)
4237 for (q_idx
= 0; q_idx
< vsi
->num_q_vectors
; q_idx
++)
4238 napi_disable(&vsi
->q_vectors
[q_idx
]->napi
);
4242 * i40e_vsi_close - Shut down a VSI
4243 * @vsi: the vsi to be quelled
4245 static void i40e_vsi_close(struct i40e_vsi
*vsi
)
4249 if (!test_and_set_bit(__I40E_DOWN
, &vsi
->state
))
4251 i40e_vsi_free_irq(vsi
);
4252 i40e_vsi_free_tx_resources(vsi
);
4253 i40e_vsi_free_rx_resources(vsi
);
4254 vsi
->current_netdev_flags
= 0;
4255 if (test_bit(__I40E_RESET_RECOVERY_PENDING
, &vsi
->back
->state
))
4257 i40e_notify_client_of_netdev_close(vsi
, reset
);
4261 * i40e_quiesce_vsi - Pause a given VSI
4262 * @vsi: the VSI being paused
4264 static void i40e_quiesce_vsi(struct i40e_vsi
*vsi
)
4266 if (test_bit(__I40E_DOWN
, &vsi
->state
))
4269 /* No need to disable FCoE VSI when Tx suspended */
4270 if ((test_bit(__I40E_PORT_TX_SUSPENDED
, &vsi
->back
->state
)) &&
4271 vsi
->type
== I40E_VSI_FCOE
) {
4272 dev_dbg(&vsi
->back
->pdev
->dev
,
4273 "VSI seid %d skipping FCoE VSI disable\n", vsi
->seid
);
4277 set_bit(__I40E_NEEDS_RESTART
, &vsi
->state
);
4278 if (vsi
->netdev
&& netif_running(vsi
->netdev
))
4279 vsi
->netdev
->netdev_ops
->ndo_stop(vsi
->netdev
);
4281 i40e_vsi_close(vsi
);
4285 * i40e_unquiesce_vsi - Resume a given VSI
4286 * @vsi: the VSI being resumed
4288 static void i40e_unquiesce_vsi(struct i40e_vsi
*vsi
)
4290 if (!test_bit(__I40E_NEEDS_RESTART
, &vsi
->state
))
4293 clear_bit(__I40E_NEEDS_RESTART
, &vsi
->state
);
4294 if (vsi
->netdev
&& netif_running(vsi
->netdev
))
4295 vsi
->netdev
->netdev_ops
->ndo_open(vsi
->netdev
);
4297 i40e_vsi_open(vsi
); /* this clears the DOWN bit */
4301 * i40e_pf_quiesce_all_vsi - Pause all VSIs on a PF
4304 static void i40e_pf_quiesce_all_vsi(struct i40e_pf
*pf
)
4308 for (v
= 0; v
< pf
->num_alloc_vsi
; v
++) {
4310 i40e_quiesce_vsi(pf
->vsi
[v
]);
4315 * i40e_pf_unquiesce_all_vsi - Resume all VSIs on a PF
4318 static void i40e_pf_unquiesce_all_vsi(struct i40e_pf
*pf
)
4322 for (v
= 0; v
< pf
->num_alloc_vsi
; v
++) {
4324 i40e_unquiesce_vsi(pf
->vsi
[v
]);
4328 #ifdef CONFIG_I40E_DCB
4330 * i40e_vsi_wait_queues_disabled - Wait for VSI's queues to be disabled
4331 * @vsi: the VSI being configured
4333 * This function waits for the given VSI's queues to be disabled.
4335 static int i40e_vsi_wait_queues_disabled(struct i40e_vsi
*vsi
)
4337 struct i40e_pf
*pf
= vsi
->back
;
4340 pf_q
= vsi
->base_queue
;
4341 for (i
= 0; i
< vsi
->num_queue_pairs
; i
++, pf_q
++) {
4342 /* Check and wait for the disable status of the queue */
4343 ret
= i40e_pf_txq_wait(pf
, pf_q
, false);
4345 dev_info(&pf
->pdev
->dev
,
4346 "VSI seid %d Tx ring %d disable timeout\n",
4352 pf_q
= vsi
->base_queue
;
4353 for (i
= 0; i
< vsi
->num_queue_pairs
; i
++, pf_q
++) {
4354 /* Check and wait for the disable status of the queue */
4355 ret
= i40e_pf_rxq_wait(pf
, pf_q
, false);
4357 dev_info(&pf
->pdev
->dev
,
4358 "VSI seid %d Rx ring %d disable timeout\n",
4368 * i40e_pf_wait_queues_disabled - Wait for all queues of PF VSIs to be disabled
4371 * This function waits for the queues to be in disabled state for all the
4372 * VSIs that are managed by this PF.
4374 static int i40e_pf_wait_queues_disabled(struct i40e_pf
*pf
)
4378 for (v
= 0; v
< pf
->hw
.func_caps
.num_vsis
; v
++) {
4379 /* No need to wait for FCoE VSI queues */
4380 if (pf
->vsi
[v
] && pf
->vsi
[v
]->type
!= I40E_VSI_FCOE
) {
4381 ret
= i40e_vsi_wait_queues_disabled(pf
->vsi
[v
]);
4393 * i40e_detect_recover_hung_queue - Function to detect and recover hung_queue
4394 * @q_idx: TX queue number
4395 * @vsi: Pointer to VSI struct
4397 * This function checks specified queue for given VSI. Detects hung condition.
4398 * Sets hung bit since it is two step process. Before next run of service task
4399 * if napi_poll runs, it reset 'hung' bit for respective q_vector. If not,
4400 * hung condition remain unchanged and during subsequent run, this function
4401 * issues SW interrupt to recover from hung condition.
4403 static void i40e_detect_recover_hung_queue(int q_idx
, struct i40e_vsi
*vsi
)
4405 struct i40e_ring
*tx_ring
= NULL
;
4407 u32 head
, val
, tx_pending_hw
;
4412 /* now that we have an index, find the tx_ring struct */
4413 for (i
= 0; i
< vsi
->num_queue_pairs
; i
++) {
4414 if (vsi
->tx_rings
[i
] && vsi
->tx_rings
[i
]->desc
) {
4415 if (q_idx
== vsi
->tx_rings
[i
]->queue_index
) {
4416 tx_ring
= vsi
->tx_rings
[i
];
4425 /* Read interrupt register */
4426 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
)
4428 I40E_PFINT_DYN_CTLN(tx_ring
->q_vector
->v_idx
+
4429 tx_ring
->vsi
->base_vector
- 1));
4431 val
= rd32(&pf
->hw
, I40E_PFINT_DYN_CTL0
);
4433 head
= i40e_get_head(tx_ring
);
4435 tx_pending_hw
= i40e_get_tx_pending(tx_ring
, false);
4437 /* HW is done executing descriptors, updated HEAD write back,
4438 * but SW hasn't processed those descriptors. If interrupt is
4439 * not generated from this point ON, it could result into
4440 * dev_watchdog detecting timeout on those netdev_queue,
4441 * hence proactively trigger SW interrupt.
4443 if (tx_pending_hw
&& (!(val
& I40E_PFINT_DYN_CTLN_INTENA_MASK
))) {
4444 /* NAPI Poll didn't run and clear since it was set */
4445 if (test_and_clear_bit(I40E_Q_VECTOR_HUNG_DETECT
,
4446 &tx_ring
->q_vector
->hung_detected
)) {
4447 netdev_info(vsi
->netdev
, "VSI_seid %d, Hung TX queue %d, tx_pending_hw: %d, NTC:0x%x, HWB: 0x%x, NTU: 0x%x, TAIL: 0x%x\n",
4448 vsi
->seid
, q_idx
, tx_pending_hw
,
4449 tx_ring
->next_to_clean
, head
,
4450 tx_ring
->next_to_use
,
4451 readl(tx_ring
->tail
));
4452 netdev_info(vsi
->netdev
, "VSI_seid %d, Issuing force_wb for TX queue %d, Interrupt Reg: 0x%x\n",
4453 vsi
->seid
, q_idx
, val
);
4454 i40e_force_wb(vsi
, tx_ring
->q_vector
);
4456 /* First Chance - detected possible hung */
4457 set_bit(I40E_Q_VECTOR_HUNG_DETECT
,
4458 &tx_ring
->q_vector
->hung_detected
);
4462 /* This is the case where we have interrupts missing,
4463 * so the tx_pending in HW will most likely be 0, but we
4464 * will have tx_pending in SW since the WB happened but the
4465 * interrupt got lost.
4467 if ((!tx_pending_hw
) && i40e_get_tx_pending(tx_ring
, true) &&
4468 (!(val
& I40E_PFINT_DYN_CTLN_INTENA_MASK
))) {
4469 if (napi_reschedule(&tx_ring
->q_vector
->napi
))
4470 tx_ring
->tx_stats
.tx_lost_interrupt
++;
4475 * i40e_detect_recover_hung - Function to detect and recover hung_queues
4476 * @pf: pointer to PF struct
4478 * LAN VSI has netdev and netdev has TX queues. This function is to check
4479 * each of those TX queues if they are hung, trigger recovery by issuing
4482 static void i40e_detect_recover_hung(struct i40e_pf
*pf
)
4484 struct net_device
*netdev
;
4485 struct i40e_vsi
*vsi
;
4488 /* Only for LAN VSI */
4489 vsi
= pf
->vsi
[pf
->lan_vsi
];
4494 /* Make sure, VSI state is not DOWN/RECOVERY_PENDING */
4495 if (test_bit(__I40E_DOWN
, &vsi
->back
->state
) ||
4496 test_bit(__I40E_RESET_RECOVERY_PENDING
, &vsi
->back
->state
))
4499 /* Make sure type is MAIN VSI */
4500 if (vsi
->type
!= I40E_VSI_MAIN
)
4503 netdev
= vsi
->netdev
;
4507 /* Bail out if netif_carrier is not OK */
4508 if (!netif_carrier_ok(netdev
))
4511 /* Go thru' TX queues for netdev */
4512 for (i
= 0; i
< netdev
->num_tx_queues
; i
++) {
4513 struct netdev_queue
*q
;
4515 q
= netdev_get_tx_queue(netdev
, i
);
4517 i40e_detect_recover_hung_queue(i
, vsi
);
4522 * i40e_get_iscsi_tc_map - Return TC map for iSCSI APP
4523 * @pf: pointer to PF
4525 * Get TC map for ISCSI PF type that will include iSCSI TC
4528 static u8
i40e_get_iscsi_tc_map(struct i40e_pf
*pf
)
4530 struct i40e_dcb_app_priority_table app
;
4531 struct i40e_hw
*hw
= &pf
->hw
;
4532 u8 enabled_tc
= 1; /* TC0 is always enabled */
4534 /* Get the iSCSI APP TLV */
4535 struct i40e_dcbx_config
*dcbcfg
= &hw
->local_dcbx_config
;
4537 for (i
= 0; i
< dcbcfg
->numapps
; i
++) {
4538 app
= dcbcfg
->app
[i
];
4539 if (app
.selector
== I40E_APP_SEL_TCPIP
&&
4540 app
.protocolid
== I40E_APP_PROTOID_ISCSI
) {
4541 tc
= dcbcfg
->etscfg
.prioritytable
[app
.priority
];
4542 enabled_tc
|= BIT(tc
);
4551 * i40e_dcb_get_num_tc - Get the number of TCs from DCBx config
4552 * @dcbcfg: the corresponding DCBx configuration structure
4554 * Return the number of TCs from given DCBx configuration
4556 static u8
i40e_dcb_get_num_tc(struct i40e_dcbx_config
*dcbcfg
)
4558 int i
, tc_unused
= 0;
4562 /* Scan the ETS Config Priority Table to find
4563 * traffic class enabled for a given priority
4564 * and create a bitmask of enabled TCs
4566 for (i
= 0; i
< I40E_MAX_USER_PRIORITY
; i
++)
4567 num_tc
|= BIT(dcbcfg
->etscfg
.prioritytable
[i
]);
4569 /* Now scan the bitmask to check for
4570 * contiguous TCs starting with TC0
4572 for (i
= 0; i
< I40E_MAX_TRAFFIC_CLASS
; i
++) {
4573 if (num_tc
& BIT(i
)) {
4577 pr_err("Non-contiguous TC - Disabling DCB\n");
4585 /* There is always at least TC0 */
4593 * i40e_dcb_get_enabled_tc - Get enabled traffic classes
4594 * @dcbcfg: the corresponding DCBx configuration structure
4596 * Query the current DCB configuration and return the number of
4597 * traffic classes enabled from the given DCBX config
4599 static u8
i40e_dcb_get_enabled_tc(struct i40e_dcbx_config
*dcbcfg
)
4601 u8 num_tc
= i40e_dcb_get_num_tc(dcbcfg
);
4605 for (i
= 0; i
< num_tc
; i
++)
4606 enabled_tc
|= BIT(i
);
4612 * i40e_pf_get_num_tc - Get enabled traffic classes for PF
4613 * @pf: PF being queried
4615 * Return number of traffic classes enabled for the given PF
4617 static u8
i40e_pf_get_num_tc(struct i40e_pf
*pf
)
4619 struct i40e_hw
*hw
= &pf
->hw
;
4620 u8 i
, enabled_tc
= 1;
4622 struct i40e_dcbx_config
*dcbcfg
= &hw
->local_dcbx_config
;
4624 /* If DCB is not enabled then always in single TC */
4625 if (!(pf
->flags
& I40E_FLAG_DCB_ENABLED
))
4628 /* SFP mode will be enabled for all TCs on port */
4629 if (!(pf
->flags
& I40E_FLAG_MFP_ENABLED
))
4630 return i40e_dcb_get_num_tc(dcbcfg
);
4632 /* MFP mode return count of enabled TCs for this PF */
4633 if (pf
->hw
.func_caps
.iscsi
)
4634 enabled_tc
= i40e_get_iscsi_tc_map(pf
);
4636 return 1; /* Only TC0 */
4638 for (i
= 0; i
< I40E_MAX_TRAFFIC_CLASS
; i
++) {
4639 if (enabled_tc
& BIT(i
))
4646 * i40e_pf_get_default_tc - Get bitmap for first enabled TC
4647 * @pf: PF being queried
4649 * Return a bitmap for first enabled traffic class for this PF.
4651 static u8
i40e_pf_get_default_tc(struct i40e_pf
*pf
)
4653 u8 enabled_tc
= pf
->hw
.func_caps
.enabled_tcmap
;
4657 return 0x1; /* TC0 */
4659 /* Find the first enabled TC */
4660 for (i
= 0; i
< I40E_MAX_TRAFFIC_CLASS
; i
++) {
4661 if (enabled_tc
& BIT(i
))
4669 * i40e_pf_get_pf_tc_map - Get bitmap for enabled traffic classes
4670 * @pf: PF being queried
4672 * Return a bitmap for enabled traffic classes for this PF.
4674 static u8
i40e_pf_get_tc_map(struct i40e_pf
*pf
)
4676 /* If DCB is not enabled for this PF then just return default TC */
4677 if (!(pf
->flags
& I40E_FLAG_DCB_ENABLED
))
4678 return i40e_pf_get_default_tc(pf
);
4680 /* SFP mode we want PF to be enabled for all TCs */
4681 if (!(pf
->flags
& I40E_FLAG_MFP_ENABLED
))
4682 return i40e_dcb_get_enabled_tc(&pf
->hw
.local_dcbx_config
);
4684 /* MFP enabled and iSCSI PF type */
4685 if (pf
->hw
.func_caps
.iscsi
)
4686 return i40e_get_iscsi_tc_map(pf
);
4688 return i40e_pf_get_default_tc(pf
);
4692 * i40e_vsi_get_bw_info - Query VSI BW Information
4693 * @vsi: the VSI being queried
4695 * Returns 0 on success, negative value on failure
4697 static int i40e_vsi_get_bw_info(struct i40e_vsi
*vsi
)
4699 struct i40e_aqc_query_vsi_ets_sla_config_resp bw_ets_config
= {0};
4700 struct i40e_aqc_query_vsi_bw_config_resp bw_config
= {0};
4701 struct i40e_pf
*pf
= vsi
->back
;
4702 struct i40e_hw
*hw
= &pf
->hw
;
4707 /* Get the VSI level BW configuration */
4708 ret
= i40e_aq_query_vsi_bw_config(hw
, vsi
->seid
, &bw_config
, NULL
);
4710 dev_info(&pf
->pdev
->dev
,
4711 "couldn't get PF vsi bw config, err %s aq_err %s\n",
4712 i40e_stat_str(&pf
->hw
, ret
),
4713 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
4717 /* Get the VSI level BW configuration per TC */
4718 ret
= i40e_aq_query_vsi_ets_sla_config(hw
, vsi
->seid
, &bw_ets_config
,
4721 dev_info(&pf
->pdev
->dev
,
4722 "couldn't get PF vsi ets bw config, err %s aq_err %s\n",
4723 i40e_stat_str(&pf
->hw
, ret
),
4724 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
4728 if (bw_config
.tc_valid_bits
!= bw_ets_config
.tc_valid_bits
) {
4729 dev_info(&pf
->pdev
->dev
,
4730 "Enabled TCs mismatch from querying VSI BW info 0x%08x 0x%08x\n",
4731 bw_config
.tc_valid_bits
,
4732 bw_ets_config
.tc_valid_bits
);
4733 /* Still continuing */
4736 vsi
->bw_limit
= le16_to_cpu(bw_config
.port_bw_limit
);
4737 vsi
->bw_max_quanta
= bw_config
.max_bw
;
4738 tc_bw_max
= le16_to_cpu(bw_ets_config
.tc_bw_max
[0]) |
4739 (le16_to_cpu(bw_ets_config
.tc_bw_max
[1]) << 16);
4740 for (i
= 0; i
< I40E_MAX_TRAFFIC_CLASS
; i
++) {
4741 vsi
->bw_ets_share_credits
[i
] = bw_ets_config
.share_credits
[i
];
4742 vsi
->bw_ets_limit_credits
[i
] =
4743 le16_to_cpu(bw_ets_config
.credits
[i
]);
4744 /* 3 bits out of 4 for each TC */
4745 vsi
->bw_ets_max_quanta
[i
] = (u8
)((tc_bw_max
>> (i
*4)) & 0x7);
4752 * i40e_vsi_configure_bw_alloc - Configure VSI BW allocation per TC
4753 * @vsi: the VSI being configured
4754 * @enabled_tc: TC bitmap
4755 * @bw_credits: BW shared credits per TC
4757 * Returns 0 on success, negative value on failure
4759 static int i40e_vsi_configure_bw_alloc(struct i40e_vsi
*vsi
, u8 enabled_tc
,
4762 struct i40e_aqc_configure_vsi_tc_bw_data bw_data
;
4766 bw_data
.tc_valid_bits
= enabled_tc
;
4767 for (i
= 0; i
< I40E_MAX_TRAFFIC_CLASS
; i
++)
4768 bw_data
.tc_bw_credits
[i
] = bw_share
[i
];
4770 ret
= i40e_aq_config_vsi_tc_bw(&vsi
->back
->hw
, vsi
->seid
, &bw_data
,
4773 dev_info(&vsi
->back
->pdev
->dev
,
4774 "AQ command Config VSI BW allocation per TC failed = %d\n",
4775 vsi
->back
->hw
.aq
.asq_last_status
);
4779 for (i
= 0; i
< I40E_MAX_TRAFFIC_CLASS
; i
++)
4780 vsi
->info
.qs_handle
[i
] = bw_data
.qs_handles
[i
];
4786 * i40e_vsi_config_netdev_tc - Setup the netdev TC configuration
4787 * @vsi: the VSI being configured
4788 * @enabled_tc: TC map to be enabled
4791 static void i40e_vsi_config_netdev_tc(struct i40e_vsi
*vsi
, u8 enabled_tc
)
4793 struct net_device
*netdev
= vsi
->netdev
;
4794 struct i40e_pf
*pf
= vsi
->back
;
4795 struct i40e_hw
*hw
= &pf
->hw
;
4798 struct i40e_dcbx_config
*dcbcfg
= &hw
->local_dcbx_config
;
4804 netdev_reset_tc(netdev
);
4808 /* Set up actual enabled TCs on the VSI */
4809 if (netdev_set_num_tc(netdev
, vsi
->tc_config
.numtc
))
4812 /* set per TC queues for the VSI */
4813 for (i
= 0; i
< I40E_MAX_TRAFFIC_CLASS
; i
++) {
4814 /* Only set TC queues for enabled tcs
4816 * e.g. For a VSI that has TC0 and TC3 enabled the
4817 * enabled_tc bitmap would be 0x00001001; the driver
4818 * will set the numtc for netdev as 2 that will be
4819 * referenced by the netdev layer as TC 0 and 1.
4821 if (vsi
->tc_config
.enabled_tc
& BIT(i
))
4822 netdev_set_tc_queue(netdev
,
4823 vsi
->tc_config
.tc_info
[i
].netdev_tc
,
4824 vsi
->tc_config
.tc_info
[i
].qcount
,
4825 vsi
->tc_config
.tc_info
[i
].qoffset
);
4828 /* Assign UP2TC map for the VSI */
4829 for (i
= 0; i
< I40E_MAX_USER_PRIORITY
; i
++) {
4830 /* Get the actual TC# for the UP */
4831 u8 ets_tc
= dcbcfg
->etscfg
.prioritytable
[i
];
4832 /* Get the mapped netdev TC# for the UP */
4833 netdev_tc
= vsi
->tc_config
.tc_info
[ets_tc
].netdev_tc
;
4834 netdev_set_prio_tc_map(netdev
, i
, netdev_tc
);
4839 * i40e_vsi_update_queue_map - Update our copy of VSi info with new queue map
4840 * @vsi: the VSI being configured
4841 * @ctxt: the ctxt buffer returned from AQ VSI update param command
4843 static void i40e_vsi_update_queue_map(struct i40e_vsi
*vsi
,
4844 struct i40e_vsi_context
*ctxt
)
4846 /* copy just the sections touched not the entire info
4847 * since not all sections are valid as returned by
4850 vsi
->info
.mapping_flags
= ctxt
->info
.mapping_flags
;
4851 memcpy(&vsi
->info
.queue_mapping
,
4852 &ctxt
->info
.queue_mapping
, sizeof(vsi
->info
.queue_mapping
));
4853 memcpy(&vsi
->info
.tc_mapping
, ctxt
->info
.tc_mapping
,
4854 sizeof(vsi
->info
.tc_mapping
));
4858 * i40e_vsi_config_tc - Configure VSI Tx Scheduler for given TC map
4859 * @vsi: VSI to be configured
4860 * @enabled_tc: TC bitmap
4862 * This configures a particular VSI for TCs that are mapped to the
4863 * given TC bitmap. It uses default bandwidth share for TCs across
4864 * VSIs to configure TC for a particular VSI.
4867 * It is expected that the VSI queues have been quisced before calling
4870 static int i40e_vsi_config_tc(struct i40e_vsi
*vsi
, u8 enabled_tc
)
4872 u8 bw_share
[I40E_MAX_TRAFFIC_CLASS
] = {0};
4873 struct i40e_vsi_context ctxt
;
4877 /* Check if enabled_tc is same as existing or new TCs */
4878 if (vsi
->tc_config
.enabled_tc
== enabled_tc
)
4881 /* Enable ETS TCs with equal BW Share for now across all VSIs */
4882 for (i
= 0; i
< I40E_MAX_TRAFFIC_CLASS
; i
++) {
4883 if (enabled_tc
& BIT(i
))
4887 ret
= i40e_vsi_configure_bw_alloc(vsi
, enabled_tc
, bw_share
);
4889 dev_info(&vsi
->back
->pdev
->dev
,
4890 "Failed configuring TC map %d for VSI %d\n",
4891 enabled_tc
, vsi
->seid
);
4895 /* Update Queue Pairs Mapping for currently enabled UPs */
4896 ctxt
.seid
= vsi
->seid
;
4897 ctxt
.pf_num
= vsi
->back
->hw
.pf_id
;
4899 ctxt
.uplink_seid
= vsi
->uplink_seid
;
4900 ctxt
.info
= vsi
->info
;
4901 i40e_vsi_setup_queue_map(vsi
, &ctxt
, enabled_tc
, false);
4903 if (vsi
->back
->flags
& I40E_FLAG_IWARP_ENABLED
) {
4904 ctxt
.info
.valid_sections
|=
4905 cpu_to_le16(I40E_AQ_VSI_PROP_QUEUE_OPT_VALID
);
4906 ctxt
.info
.queueing_opt_flags
|= I40E_AQ_VSI_QUE_OPT_TCP_ENA
;
4909 /* Update the VSI after updating the VSI queue-mapping information */
4910 ret
= i40e_aq_update_vsi_params(&vsi
->back
->hw
, &ctxt
, NULL
);
4912 dev_info(&vsi
->back
->pdev
->dev
,
4913 "Update vsi tc config failed, err %s aq_err %s\n",
4914 i40e_stat_str(&vsi
->back
->hw
, ret
),
4915 i40e_aq_str(&vsi
->back
->hw
,
4916 vsi
->back
->hw
.aq
.asq_last_status
));
4919 /* update the local VSI info with updated queue map */
4920 i40e_vsi_update_queue_map(vsi
, &ctxt
);
4921 vsi
->info
.valid_sections
= 0;
4923 /* Update current VSI BW information */
4924 ret
= i40e_vsi_get_bw_info(vsi
);
4926 dev_info(&vsi
->back
->pdev
->dev
,
4927 "Failed updating vsi bw info, err %s aq_err %s\n",
4928 i40e_stat_str(&vsi
->back
->hw
, ret
),
4929 i40e_aq_str(&vsi
->back
->hw
,
4930 vsi
->back
->hw
.aq
.asq_last_status
));
4934 /* Update the netdev TC setup */
4935 i40e_vsi_config_netdev_tc(vsi
, enabled_tc
);
4941 * i40e_veb_config_tc - Configure TCs for given VEB
4943 * @enabled_tc: TC bitmap
4945 * Configures given TC bitmap for VEB (switching) element
4947 int i40e_veb_config_tc(struct i40e_veb
*veb
, u8 enabled_tc
)
4949 struct i40e_aqc_configure_switching_comp_bw_config_data bw_data
= {0};
4950 struct i40e_pf
*pf
= veb
->pf
;
4954 /* No TCs or already enabled TCs just return */
4955 if (!enabled_tc
|| veb
->enabled_tc
== enabled_tc
)
4958 bw_data
.tc_valid_bits
= enabled_tc
;
4959 /* bw_data.absolute_credits is not set (relative) */
4961 /* Enable ETS TCs with equal BW Share for now */
4962 for (i
= 0; i
< I40E_MAX_TRAFFIC_CLASS
; i
++) {
4963 if (enabled_tc
& BIT(i
))
4964 bw_data
.tc_bw_share_credits
[i
] = 1;
4967 ret
= i40e_aq_config_switch_comp_bw_config(&pf
->hw
, veb
->seid
,
4970 dev_info(&pf
->pdev
->dev
,
4971 "VEB bw config failed, err %s aq_err %s\n",
4972 i40e_stat_str(&pf
->hw
, ret
),
4973 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
4977 /* Update the BW information */
4978 ret
= i40e_veb_get_bw_info(veb
);
4980 dev_info(&pf
->pdev
->dev
,
4981 "Failed getting veb bw config, err %s aq_err %s\n",
4982 i40e_stat_str(&pf
->hw
, ret
),
4983 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
4990 #ifdef CONFIG_I40E_DCB
4992 * i40e_dcb_reconfigure - Reconfigure all VEBs and VSIs
4995 * Reconfigure VEB/VSIs on a given PF; it is assumed that
4996 * the caller would've quiesce all the VSIs before calling
4999 static void i40e_dcb_reconfigure(struct i40e_pf
*pf
)
5005 /* Enable the TCs available on PF to all VEBs */
5006 tc_map
= i40e_pf_get_tc_map(pf
);
5007 for (v
= 0; v
< I40E_MAX_VEB
; v
++) {
5010 ret
= i40e_veb_config_tc(pf
->veb
[v
], tc_map
);
5012 dev_info(&pf
->pdev
->dev
,
5013 "Failed configuring TC for VEB seid=%d\n",
5015 /* Will try to configure as many components */
5019 /* Update each VSI */
5020 for (v
= 0; v
< pf
->num_alloc_vsi
; v
++) {
5024 /* - Enable all TCs for the LAN VSI
5026 * - For FCoE VSI only enable the TC configured
5027 * as per the APP TLV
5029 * - For all others keep them at TC0 for now
5031 if (v
== pf
->lan_vsi
)
5032 tc_map
= i40e_pf_get_tc_map(pf
);
5034 tc_map
= i40e_pf_get_default_tc(pf
);
5036 if (pf
->vsi
[v
]->type
== I40E_VSI_FCOE
)
5037 tc_map
= i40e_get_fcoe_tc_map(pf
);
5038 #endif /* #ifdef I40E_FCOE */
5040 ret
= i40e_vsi_config_tc(pf
->vsi
[v
], tc_map
);
5042 dev_info(&pf
->pdev
->dev
,
5043 "Failed configuring TC for VSI seid=%d\n",
5045 /* Will try to configure as many components */
5047 /* Re-configure VSI vectors based on updated TC map */
5048 i40e_vsi_map_rings_to_vectors(pf
->vsi
[v
]);
5049 if (pf
->vsi
[v
]->netdev
)
5050 i40e_dcbnl_set_all(pf
->vsi
[v
]);
5056 * i40e_resume_port_tx - Resume port Tx
5059 * Resume a port's Tx and issue a PF reset in case of failure to
5062 static int i40e_resume_port_tx(struct i40e_pf
*pf
)
5064 struct i40e_hw
*hw
= &pf
->hw
;
5067 ret
= i40e_aq_resume_port_tx(hw
, NULL
);
5069 dev_info(&pf
->pdev
->dev
,
5070 "Resume Port Tx failed, err %s aq_err %s\n",
5071 i40e_stat_str(&pf
->hw
, ret
),
5072 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
5073 /* Schedule PF reset to recover */
5074 set_bit(__I40E_PF_RESET_REQUESTED
, &pf
->state
);
5075 i40e_service_event_schedule(pf
);
5082 * i40e_init_pf_dcb - Initialize DCB configuration
5083 * @pf: PF being configured
5085 * Query the current DCB configuration and cache it
5086 * in the hardware structure
5088 static int i40e_init_pf_dcb(struct i40e_pf
*pf
)
5090 struct i40e_hw
*hw
= &pf
->hw
;
5093 /* Do not enable DCB for SW1 and SW2 images even if the FW is capable */
5094 if (pf
->flags
& I40E_FLAG_NO_DCB_SUPPORT
)
5097 /* Get the initial DCB configuration */
5098 err
= i40e_init_dcb(hw
);
5100 /* Device/Function is not DCBX capable */
5101 if ((!hw
->func_caps
.dcb
) ||
5102 (hw
->dcbx_status
== I40E_DCBX_STATUS_DISABLED
)) {
5103 dev_info(&pf
->pdev
->dev
,
5104 "DCBX offload is not supported or is disabled for this PF.\n");
5106 if (pf
->flags
& I40E_FLAG_MFP_ENABLED
)
5110 /* When status is not DISABLED then DCBX in FW */
5111 pf
->dcbx_cap
= DCB_CAP_DCBX_LLD_MANAGED
|
5112 DCB_CAP_DCBX_VER_IEEE
;
5114 pf
->flags
|= I40E_FLAG_DCB_CAPABLE
;
5115 /* Enable DCB tagging only when more than one TC */
5116 if (i40e_dcb_get_num_tc(&hw
->local_dcbx_config
) > 1)
5117 pf
->flags
|= I40E_FLAG_DCB_ENABLED
;
5118 dev_dbg(&pf
->pdev
->dev
,
5119 "DCBX offload is supported for this PF.\n");
5122 dev_info(&pf
->pdev
->dev
,
5123 "Query for DCB configuration failed, err %s aq_err %s\n",
5124 i40e_stat_str(&pf
->hw
, err
),
5125 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
5131 #endif /* CONFIG_I40E_DCB */
5132 #define SPEED_SIZE 14
5135 * i40e_print_link_message - print link up or down
5136 * @vsi: the VSI for which link needs a message
5138 void i40e_print_link_message(struct i40e_vsi
*vsi
, bool isup
)
5140 char *speed
= "Unknown";
5141 char *fc
= "Unknown";
5143 if (vsi
->current_isup
== isup
)
5145 vsi
->current_isup
= isup
;
5147 netdev_info(vsi
->netdev
, "NIC Link is Down\n");
5151 /* Warn user if link speed on NPAR enabled partition is not at
5154 if (vsi
->back
->hw
.func_caps
.npar_enable
&&
5155 (vsi
->back
->hw
.phy
.link_info
.link_speed
== I40E_LINK_SPEED_1GB
||
5156 vsi
->back
->hw
.phy
.link_info
.link_speed
== I40E_LINK_SPEED_100MB
))
5157 netdev_warn(vsi
->netdev
,
5158 "The partition detected link speed that is less than 10Gbps\n");
5160 switch (vsi
->back
->hw
.phy
.link_info
.link_speed
) {
5161 case I40E_LINK_SPEED_40GB
:
5164 case I40E_LINK_SPEED_20GB
:
5167 case I40E_LINK_SPEED_10GB
:
5170 case I40E_LINK_SPEED_1GB
:
5173 case I40E_LINK_SPEED_100MB
:
5180 switch (vsi
->back
->hw
.fc
.current_mode
) {
5184 case I40E_FC_TX_PAUSE
:
5187 case I40E_FC_RX_PAUSE
:
5195 netdev_info(vsi
->netdev
, "NIC Link is Up %sbps Full Duplex, Flow Control: %s\n",
5200 * i40e_up_complete - Finish the last steps of bringing up a connection
5201 * @vsi: the VSI being configured
5203 static int i40e_up_complete(struct i40e_vsi
*vsi
)
5205 struct i40e_pf
*pf
= vsi
->back
;
5208 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
)
5209 i40e_vsi_configure_msix(vsi
);
5211 i40e_configure_msi_and_legacy(vsi
);
5214 err
= i40e_vsi_control_rings(vsi
, true);
5218 clear_bit(__I40E_DOWN
, &vsi
->state
);
5219 i40e_napi_enable_all(vsi
);
5220 i40e_vsi_enable_irq(vsi
);
5222 if ((pf
->hw
.phy
.link_info
.link_info
& I40E_AQ_LINK_UP
) &&
5224 i40e_print_link_message(vsi
, true);
5225 netif_tx_start_all_queues(vsi
->netdev
);
5226 netif_carrier_on(vsi
->netdev
);
5227 } else if (vsi
->netdev
) {
5228 i40e_print_link_message(vsi
, false);
5229 /* need to check for qualified module here*/
5230 if ((pf
->hw
.phy
.link_info
.link_info
&
5231 I40E_AQ_MEDIA_AVAILABLE
) &&
5232 (!(pf
->hw
.phy
.link_info
.an_info
&
5233 I40E_AQ_QUALIFIED_MODULE
)))
5234 netdev_err(vsi
->netdev
,
5235 "the driver failed to link because an unqualified module was detected.");
5238 /* replay FDIR SB filters */
5239 if (vsi
->type
== I40E_VSI_FDIR
) {
5240 /* reset fd counters */
5241 pf
->fd_add_err
= pf
->fd_atr_cnt
= 0;
5242 if (pf
->fd_tcp_rule
> 0) {
5243 pf
->flags
&= ~I40E_FLAG_FD_ATR_ENABLED
;
5244 if (I40E_DEBUG_FD
& pf
->hw
.debug_mask
)
5245 dev_info(&pf
->pdev
->dev
, "Forcing ATR off, sideband rules for TCP/IPv4 exist\n");
5246 pf
->fd_tcp_rule
= 0;
5248 i40e_fdir_filter_restore(vsi
);
5251 /* On the next run of the service_task, notify any clients of the new
5254 pf
->flags
|= I40E_FLAG_SERVICE_CLIENT_REQUESTED
;
5255 i40e_service_event_schedule(pf
);
5261 * i40e_vsi_reinit_locked - Reset the VSI
5262 * @vsi: the VSI being configured
5264 * Rebuild the ring structs after some configuration
5265 * has changed, e.g. MTU size.
5267 static void i40e_vsi_reinit_locked(struct i40e_vsi
*vsi
)
5269 struct i40e_pf
*pf
= vsi
->back
;
5271 WARN_ON(in_interrupt());
5272 while (test_and_set_bit(__I40E_CONFIG_BUSY
, &pf
->state
))
5273 usleep_range(1000, 2000);
5277 clear_bit(__I40E_CONFIG_BUSY
, &pf
->state
);
5281 * i40e_up - Bring the connection back up after being down
5282 * @vsi: the VSI being configured
5284 int i40e_up(struct i40e_vsi
*vsi
)
5288 err
= i40e_vsi_configure(vsi
);
5290 err
= i40e_up_complete(vsi
);
5296 * i40e_down - Shutdown the connection processing
5297 * @vsi: the VSI being stopped
5299 void i40e_down(struct i40e_vsi
*vsi
)
5303 /* It is assumed that the caller of this function
5304 * sets the vsi->state __I40E_DOWN bit.
5307 netif_carrier_off(vsi
->netdev
);
5308 netif_tx_disable(vsi
->netdev
);
5310 i40e_vsi_disable_irq(vsi
);
5311 i40e_vsi_control_rings(vsi
, false);
5312 i40e_napi_disable_all(vsi
);
5314 for (i
= 0; i
< vsi
->num_queue_pairs
; i
++) {
5315 i40e_clean_tx_ring(vsi
->tx_rings
[i
]);
5316 i40e_clean_rx_ring(vsi
->rx_rings
[i
]);
5319 i40e_notify_client_of_netdev_close(vsi
, false);
5324 * i40e_setup_tc - configure multiple traffic classes
5325 * @netdev: net device to configure
5326 * @tc: number of traffic classes to enable
5328 static int i40e_setup_tc(struct net_device
*netdev
, u8 tc
)
5330 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
5331 struct i40e_vsi
*vsi
= np
->vsi
;
5332 struct i40e_pf
*pf
= vsi
->back
;
5337 /* Check if DCB enabled to continue */
5338 if (!(pf
->flags
& I40E_FLAG_DCB_ENABLED
)) {
5339 netdev_info(netdev
, "DCB is not enabled for adapter\n");
5343 /* Check if MFP enabled */
5344 if (pf
->flags
& I40E_FLAG_MFP_ENABLED
) {
5345 netdev_info(netdev
, "Configuring TC not supported in MFP mode\n");
5349 /* Check whether tc count is within enabled limit */
5350 if (tc
> i40e_pf_get_num_tc(pf
)) {
5351 netdev_info(netdev
, "TC count greater than enabled on link for adapter\n");
5355 /* Generate TC map for number of tc requested */
5356 for (i
= 0; i
< tc
; i
++)
5357 enabled_tc
|= BIT(i
);
5359 /* Requesting same TC configuration as already enabled */
5360 if (enabled_tc
== vsi
->tc_config
.enabled_tc
)
5363 /* Quiesce VSI queues */
5364 i40e_quiesce_vsi(vsi
);
5366 /* Configure VSI for enabled TCs */
5367 ret
= i40e_vsi_config_tc(vsi
, enabled_tc
);
5369 netdev_info(netdev
, "Failed configuring TC for VSI seid=%d\n",
5375 i40e_unquiesce_vsi(vsi
);
5382 int __i40e_setup_tc(struct net_device
*netdev
, u32 handle
, __be16 proto
,
5383 struct tc_to_netdev
*tc
)
5385 static int __i40e_setup_tc(struct net_device
*netdev
, u32 handle
, __be16 proto
,
5386 struct tc_to_netdev
*tc
)
5389 if (handle
!= TC_H_ROOT
|| tc
->type
!= TC_SETUP_MQPRIO
)
5391 return i40e_setup_tc(netdev
, tc
->tc
);
5395 * i40e_open - Called when a network interface is made active
5396 * @netdev: network interface device structure
5398 * The open entry point is called when a network interface is made
5399 * active by the system (IFF_UP). At this point all resources needed
5400 * for transmit and receive operations are allocated, the interrupt
5401 * handler is registered with the OS, the netdev watchdog subtask is
5402 * enabled, and the stack is notified that the interface is ready.
5404 * Returns 0 on success, negative value on failure
5406 int i40e_open(struct net_device
*netdev
)
5408 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
5409 struct i40e_vsi
*vsi
= np
->vsi
;
5410 struct i40e_pf
*pf
= vsi
->back
;
5413 /* disallow open during test or if eeprom is broken */
5414 if (test_bit(__I40E_TESTING
, &pf
->state
) ||
5415 test_bit(__I40E_BAD_EEPROM
, &pf
->state
))
5418 netif_carrier_off(netdev
);
5420 err
= i40e_vsi_open(vsi
);
5424 /* configure global TSO hardware offload settings */
5425 wr32(&pf
->hw
, I40E_GLLAN_TSOMSK_F
, be32_to_cpu(TCP_FLAG_PSH
|
5426 TCP_FLAG_FIN
) >> 16);
5427 wr32(&pf
->hw
, I40E_GLLAN_TSOMSK_M
, be32_to_cpu(TCP_FLAG_PSH
|
5429 TCP_FLAG_CWR
) >> 16);
5430 wr32(&pf
->hw
, I40E_GLLAN_TSOMSK_L
, be32_to_cpu(TCP_FLAG_CWR
) >> 16);
5432 udp_tunnel_get_rx_info(netdev
);
5433 i40e_notify_client_of_netdev_open(vsi
);
5440 * @vsi: the VSI to open
5442 * Finish initialization of the VSI.
5444 * Returns 0 on success, negative value on failure
5446 int i40e_vsi_open(struct i40e_vsi
*vsi
)
5448 struct i40e_pf
*pf
= vsi
->back
;
5449 char int_name
[I40E_INT_NAME_STR_LEN
];
5452 /* allocate descriptors */
5453 err
= i40e_vsi_setup_tx_resources(vsi
);
5456 err
= i40e_vsi_setup_rx_resources(vsi
);
5460 err
= i40e_vsi_configure(vsi
);
5465 snprintf(int_name
, sizeof(int_name
) - 1, "%s-%s",
5466 dev_driver_string(&pf
->pdev
->dev
), vsi
->netdev
->name
);
5467 err
= i40e_vsi_request_irq(vsi
, int_name
);
5471 /* Notify the stack of the actual queue counts. */
5472 err
= netif_set_real_num_tx_queues(vsi
->netdev
,
5473 vsi
->num_queue_pairs
);
5475 goto err_set_queues
;
5477 err
= netif_set_real_num_rx_queues(vsi
->netdev
,
5478 vsi
->num_queue_pairs
);
5480 goto err_set_queues
;
5482 } else if (vsi
->type
== I40E_VSI_FDIR
) {
5483 snprintf(int_name
, sizeof(int_name
) - 1, "%s-%s:fdir",
5484 dev_driver_string(&pf
->pdev
->dev
),
5485 dev_name(&pf
->pdev
->dev
));
5486 err
= i40e_vsi_request_irq(vsi
, int_name
);
5493 err
= i40e_up_complete(vsi
);
5495 goto err_up_complete
;
5502 i40e_vsi_free_irq(vsi
);
5504 i40e_vsi_free_rx_resources(vsi
);
5506 i40e_vsi_free_tx_resources(vsi
);
5507 if (vsi
== pf
->vsi
[pf
->lan_vsi
])
5508 i40e_do_reset(pf
, BIT_ULL(__I40E_PF_RESET_REQUESTED
));
5514 * i40e_fdir_filter_exit - Cleans up the Flow Director accounting
5515 * @pf: Pointer to PF
5517 * This function destroys the hlist where all the Flow Director
5518 * filters were saved.
5520 static void i40e_fdir_filter_exit(struct i40e_pf
*pf
)
5522 struct i40e_fdir_filter
*filter
;
5523 struct hlist_node
*node2
;
5525 hlist_for_each_entry_safe(filter
, node2
,
5526 &pf
->fdir_filter_list
, fdir_node
) {
5527 hlist_del(&filter
->fdir_node
);
5530 pf
->fdir_pf_active_filters
= 0;
5534 * i40e_close - Disables a network interface
5535 * @netdev: network interface device structure
5537 * The close entry point is called when an interface is de-activated
5538 * by the OS. The hardware is still under the driver's control, but
5539 * this netdev interface is disabled.
5541 * Returns 0, this is not allowed to fail
5543 int i40e_close(struct net_device
*netdev
)
5545 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
5546 struct i40e_vsi
*vsi
= np
->vsi
;
5548 i40e_vsi_close(vsi
);
5554 * i40e_do_reset - Start a PF or Core Reset sequence
5555 * @pf: board private structure
5556 * @reset_flags: which reset is requested
5558 * The essential difference in resets is that the PF Reset
5559 * doesn't clear the packet buffers, doesn't reset the PE
5560 * firmware, and doesn't bother the other PFs on the chip.
5562 void i40e_do_reset(struct i40e_pf
*pf
, u32 reset_flags
)
5566 WARN_ON(in_interrupt());
5569 /* do the biggest reset indicated */
5570 if (reset_flags
& BIT_ULL(__I40E_GLOBAL_RESET_REQUESTED
)) {
5572 /* Request a Global Reset
5574 * This will start the chip's countdown to the actual full
5575 * chip reset event, and a warning interrupt to be sent
5576 * to all PFs, including the requestor. Our handler
5577 * for the warning interrupt will deal with the shutdown
5578 * and recovery of the switch setup.
5580 dev_dbg(&pf
->pdev
->dev
, "GlobalR requested\n");
5581 val
= rd32(&pf
->hw
, I40E_GLGEN_RTRIG
);
5582 val
|= I40E_GLGEN_RTRIG_GLOBR_MASK
;
5583 wr32(&pf
->hw
, I40E_GLGEN_RTRIG
, val
);
5585 } else if (reset_flags
& BIT_ULL(__I40E_CORE_RESET_REQUESTED
)) {
5587 /* Request a Core Reset
5589 * Same as Global Reset, except does *not* include the MAC/PHY
5591 dev_dbg(&pf
->pdev
->dev
, "CoreR requested\n");
5592 val
= rd32(&pf
->hw
, I40E_GLGEN_RTRIG
);
5593 val
|= I40E_GLGEN_RTRIG_CORER_MASK
;
5594 wr32(&pf
->hw
, I40E_GLGEN_RTRIG
, val
);
5595 i40e_flush(&pf
->hw
);
5597 } else if (reset_flags
& BIT_ULL(__I40E_PF_RESET_REQUESTED
)) {
5599 /* Request a PF Reset
5601 * Resets only the PF-specific registers
5603 * This goes directly to the tear-down and rebuild of
5604 * the switch, since we need to do all the recovery as
5605 * for the Core Reset.
5607 dev_dbg(&pf
->pdev
->dev
, "PFR requested\n");
5608 i40e_handle_reset_warning(pf
);
5610 } else if (reset_flags
& BIT_ULL(__I40E_REINIT_REQUESTED
)) {
5613 /* Find the VSI(s) that requested a re-init */
5614 dev_info(&pf
->pdev
->dev
,
5615 "VSI reinit requested\n");
5616 for (v
= 0; v
< pf
->num_alloc_vsi
; v
++) {
5617 struct i40e_vsi
*vsi
= pf
->vsi
[v
];
5620 test_bit(__I40E_REINIT_REQUESTED
, &vsi
->state
)) {
5621 i40e_vsi_reinit_locked(pf
->vsi
[v
]);
5622 clear_bit(__I40E_REINIT_REQUESTED
, &vsi
->state
);
5625 } else if (reset_flags
& BIT_ULL(__I40E_DOWN_REQUESTED
)) {
5628 /* Find the VSI(s) that needs to be brought down */
5629 dev_info(&pf
->pdev
->dev
, "VSI down requested\n");
5630 for (v
= 0; v
< pf
->num_alloc_vsi
; v
++) {
5631 struct i40e_vsi
*vsi
= pf
->vsi
[v
];
5634 test_bit(__I40E_DOWN_REQUESTED
, &vsi
->state
)) {
5635 set_bit(__I40E_DOWN
, &vsi
->state
);
5637 clear_bit(__I40E_DOWN_REQUESTED
, &vsi
->state
);
5641 dev_info(&pf
->pdev
->dev
,
5642 "bad reset request 0x%08x\n", reset_flags
);
5646 #ifdef CONFIG_I40E_DCB
5648 * i40e_dcb_need_reconfig - Check if DCB needs reconfig
5649 * @pf: board private structure
5650 * @old_cfg: current DCB config
5651 * @new_cfg: new DCB config
5653 bool i40e_dcb_need_reconfig(struct i40e_pf
*pf
,
5654 struct i40e_dcbx_config
*old_cfg
,
5655 struct i40e_dcbx_config
*new_cfg
)
5657 bool need_reconfig
= false;
5659 /* Check if ETS configuration has changed */
5660 if (memcmp(&new_cfg
->etscfg
,
5662 sizeof(new_cfg
->etscfg
))) {
5663 /* If Priority Table has changed reconfig is needed */
5664 if (memcmp(&new_cfg
->etscfg
.prioritytable
,
5665 &old_cfg
->etscfg
.prioritytable
,
5666 sizeof(new_cfg
->etscfg
.prioritytable
))) {
5667 need_reconfig
= true;
5668 dev_dbg(&pf
->pdev
->dev
, "ETS UP2TC changed.\n");
5671 if (memcmp(&new_cfg
->etscfg
.tcbwtable
,
5672 &old_cfg
->etscfg
.tcbwtable
,
5673 sizeof(new_cfg
->etscfg
.tcbwtable
)))
5674 dev_dbg(&pf
->pdev
->dev
, "ETS TC BW Table changed.\n");
5676 if (memcmp(&new_cfg
->etscfg
.tsatable
,
5677 &old_cfg
->etscfg
.tsatable
,
5678 sizeof(new_cfg
->etscfg
.tsatable
)))
5679 dev_dbg(&pf
->pdev
->dev
, "ETS TSA Table changed.\n");
5682 /* Check if PFC configuration has changed */
5683 if (memcmp(&new_cfg
->pfc
,
5685 sizeof(new_cfg
->pfc
))) {
5686 need_reconfig
= true;
5687 dev_dbg(&pf
->pdev
->dev
, "PFC config change detected.\n");
5690 /* Check if APP Table has changed */
5691 if (memcmp(&new_cfg
->app
,
5693 sizeof(new_cfg
->app
))) {
5694 need_reconfig
= true;
5695 dev_dbg(&pf
->pdev
->dev
, "APP Table change detected.\n");
5698 dev_dbg(&pf
->pdev
->dev
, "dcb need_reconfig=%d\n", need_reconfig
);
5699 return need_reconfig
;
5703 * i40e_handle_lldp_event - Handle LLDP Change MIB event
5704 * @pf: board private structure
5705 * @e: event info posted on ARQ
5707 static int i40e_handle_lldp_event(struct i40e_pf
*pf
,
5708 struct i40e_arq_event_info
*e
)
5710 struct i40e_aqc_lldp_get_mib
*mib
=
5711 (struct i40e_aqc_lldp_get_mib
*)&e
->desc
.params
.raw
;
5712 struct i40e_hw
*hw
= &pf
->hw
;
5713 struct i40e_dcbx_config tmp_dcbx_cfg
;
5714 bool need_reconfig
= false;
5718 /* Not DCB capable or capability disabled */
5719 if (!(pf
->flags
& I40E_FLAG_DCB_CAPABLE
))
5722 /* Ignore if event is not for Nearest Bridge */
5723 type
= ((mib
->type
>> I40E_AQ_LLDP_BRIDGE_TYPE_SHIFT
)
5724 & I40E_AQ_LLDP_BRIDGE_TYPE_MASK
);
5725 dev_dbg(&pf
->pdev
->dev
, "LLDP event mib bridge type 0x%x\n", type
);
5726 if (type
!= I40E_AQ_LLDP_BRIDGE_TYPE_NEAREST_BRIDGE
)
5729 /* Check MIB Type and return if event for Remote MIB update */
5730 type
= mib
->type
& I40E_AQ_LLDP_MIB_TYPE_MASK
;
5731 dev_dbg(&pf
->pdev
->dev
,
5732 "LLDP event mib type %s\n", type
? "remote" : "local");
5733 if (type
== I40E_AQ_LLDP_MIB_REMOTE
) {
5734 /* Update the remote cached instance and return */
5735 ret
= i40e_aq_get_dcb_config(hw
, I40E_AQ_LLDP_MIB_REMOTE
,
5736 I40E_AQ_LLDP_BRIDGE_TYPE_NEAREST_BRIDGE
,
5737 &hw
->remote_dcbx_config
);
5741 /* Store the old configuration */
5742 tmp_dcbx_cfg
= hw
->local_dcbx_config
;
5744 /* Reset the old DCBx configuration data */
5745 memset(&hw
->local_dcbx_config
, 0, sizeof(hw
->local_dcbx_config
));
5746 /* Get updated DCBX data from firmware */
5747 ret
= i40e_get_dcb_config(&pf
->hw
);
5749 dev_info(&pf
->pdev
->dev
,
5750 "Failed querying DCB configuration data from firmware, err %s aq_err %s\n",
5751 i40e_stat_str(&pf
->hw
, ret
),
5752 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
5756 /* No change detected in DCBX configs */
5757 if (!memcmp(&tmp_dcbx_cfg
, &hw
->local_dcbx_config
,
5758 sizeof(tmp_dcbx_cfg
))) {
5759 dev_dbg(&pf
->pdev
->dev
, "No change detected in DCBX configuration.\n");
5763 need_reconfig
= i40e_dcb_need_reconfig(pf
, &tmp_dcbx_cfg
,
5764 &hw
->local_dcbx_config
);
5766 i40e_dcbnl_flush_apps(pf
, &tmp_dcbx_cfg
, &hw
->local_dcbx_config
);
5771 /* Enable DCB tagging only when more than one TC */
5772 if (i40e_dcb_get_num_tc(&hw
->local_dcbx_config
) > 1)
5773 pf
->flags
|= I40E_FLAG_DCB_ENABLED
;
5775 pf
->flags
&= ~I40E_FLAG_DCB_ENABLED
;
5777 set_bit(__I40E_PORT_TX_SUSPENDED
, &pf
->state
);
5778 /* Reconfiguration needed quiesce all VSIs */
5779 i40e_pf_quiesce_all_vsi(pf
);
5781 /* Changes in configuration update VEB/VSI */
5782 i40e_dcb_reconfigure(pf
);
5784 ret
= i40e_resume_port_tx(pf
);
5786 clear_bit(__I40E_PORT_TX_SUSPENDED
, &pf
->state
);
5787 /* In case of error no point in resuming VSIs */
5791 /* Wait for the PF's queues to be disabled */
5792 ret
= i40e_pf_wait_queues_disabled(pf
);
5794 /* Schedule PF reset to recover */
5795 set_bit(__I40E_PF_RESET_REQUESTED
, &pf
->state
);
5796 i40e_service_event_schedule(pf
);
5798 i40e_pf_unquiesce_all_vsi(pf
);
5799 /* Notify the client for the DCB changes */
5800 i40e_notify_client_of_l2_param_changes(pf
->vsi
[pf
->lan_vsi
]);
5806 #endif /* CONFIG_I40E_DCB */
5809 * i40e_do_reset_safe - Protected reset path for userland calls.
5810 * @pf: board private structure
5811 * @reset_flags: which reset is requested
5814 void i40e_do_reset_safe(struct i40e_pf
*pf
, u32 reset_flags
)
5817 i40e_do_reset(pf
, reset_flags
);
5822 * i40e_handle_lan_overflow_event - Handler for LAN queue overflow event
5823 * @pf: board private structure
5824 * @e: event info posted on ARQ
5826 * Handler for LAN Queue Overflow Event generated by the firmware for PF
5829 static void i40e_handle_lan_overflow_event(struct i40e_pf
*pf
,
5830 struct i40e_arq_event_info
*e
)
5832 struct i40e_aqc_lan_overflow
*data
=
5833 (struct i40e_aqc_lan_overflow
*)&e
->desc
.params
.raw
;
5834 u32 queue
= le32_to_cpu(data
->prtdcb_rupto
);
5835 u32 qtx_ctl
= le32_to_cpu(data
->otx_ctl
);
5836 struct i40e_hw
*hw
= &pf
->hw
;
5840 dev_dbg(&pf
->pdev
->dev
, "overflow Rx Queue Number = %d QTX_CTL=0x%08x\n",
5843 /* Queue belongs to VF, find the VF and issue VF reset */
5844 if (((qtx_ctl
& I40E_QTX_CTL_PFVF_Q_MASK
)
5845 >> I40E_QTX_CTL_PFVF_Q_SHIFT
) == I40E_QTX_CTL_VF_QUEUE
) {
5846 vf_id
= (u16
)((qtx_ctl
& I40E_QTX_CTL_VFVM_INDX_MASK
)
5847 >> I40E_QTX_CTL_VFVM_INDX_SHIFT
);
5848 vf_id
-= hw
->func_caps
.vf_base_id
;
5849 vf
= &pf
->vf
[vf_id
];
5850 i40e_vc_notify_vf_reset(vf
);
5851 /* Allow VF to process pending reset notification */
5853 i40e_reset_vf(vf
, false);
5858 * i40e_service_event_complete - Finish up the service event
5859 * @pf: board private structure
5861 static void i40e_service_event_complete(struct i40e_pf
*pf
)
5863 WARN_ON(!test_bit(__I40E_SERVICE_SCHED
, &pf
->state
));
5865 /* flush memory to make sure state is correct before next watchog */
5866 smp_mb__before_atomic();
5867 clear_bit(__I40E_SERVICE_SCHED
, &pf
->state
);
5871 * i40e_get_cur_guaranteed_fd_count - Get the consumed guaranteed FD filters
5872 * @pf: board private structure
5874 u32
i40e_get_cur_guaranteed_fd_count(struct i40e_pf
*pf
)
5878 val
= rd32(&pf
->hw
, I40E_PFQF_FDSTAT
);
5879 fcnt_prog
= (val
& I40E_PFQF_FDSTAT_GUARANT_CNT_MASK
);
5884 * i40e_get_current_fd_count - Get total FD filters programmed for this PF
5885 * @pf: board private structure
5887 u32
i40e_get_current_fd_count(struct i40e_pf
*pf
)
5891 val
= rd32(&pf
->hw
, I40E_PFQF_FDSTAT
);
5892 fcnt_prog
= (val
& I40E_PFQF_FDSTAT_GUARANT_CNT_MASK
) +
5893 ((val
& I40E_PFQF_FDSTAT_BEST_CNT_MASK
) >>
5894 I40E_PFQF_FDSTAT_BEST_CNT_SHIFT
);
5899 * i40e_get_global_fd_count - Get total FD filters programmed on device
5900 * @pf: board private structure
5902 u32
i40e_get_global_fd_count(struct i40e_pf
*pf
)
5906 val
= rd32(&pf
->hw
, I40E_GLQF_FDCNT_0
);
5907 fcnt_prog
= (val
& I40E_GLQF_FDCNT_0_GUARANT_CNT_MASK
) +
5908 ((val
& I40E_GLQF_FDCNT_0_BESTCNT_MASK
) >>
5909 I40E_GLQF_FDCNT_0_BESTCNT_SHIFT
);
5914 * i40e_fdir_check_and_reenable - Function to reenabe FD ATR or SB if disabled
5915 * @pf: board private structure
5917 void i40e_fdir_check_and_reenable(struct i40e_pf
*pf
)
5919 struct i40e_fdir_filter
*filter
;
5920 u32 fcnt_prog
, fcnt_avail
;
5921 struct hlist_node
*node
;
5923 if (test_bit(__I40E_FD_FLUSH_REQUESTED
, &pf
->state
))
5926 /* Check if, FD SB or ATR was auto disabled and if there is enough room
5929 fcnt_prog
= i40e_get_global_fd_count(pf
);
5930 fcnt_avail
= pf
->fdir_pf_filter_count
;
5931 if ((fcnt_prog
< (fcnt_avail
- I40E_FDIR_BUFFER_HEAD_ROOM
)) ||
5932 (pf
->fd_add_err
== 0) ||
5933 (i40e_get_current_atr_cnt(pf
) < pf
->fd_atr_cnt
)) {
5934 if ((pf
->flags
& I40E_FLAG_FD_SB_ENABLED
) &&
5935 (pf
->auto_disable_flags
& I40E_FLAG_FD_SB_ENABLED
)) {
5936 pf
->auto_disable_flags
&= ~I40E_FLAG_FD_SB_ENABLED
;
5937 if (I40E_DEBUG_FD
& pf
->hw
.debug_mask
)
5938 dev_info(&pf
->pdev
->dev
, "FD Sideband/ntuple is being enabled since we have space in the table now\n");
5941 /* Wait for some more space to be available to turn on ATR */
5942 if (fcnt_prog
< (fcnt_avail
- I40E_FDIR_BUFFER_HEAD_ROOM
* 2)) {
5943 if ((pf
->flags
& I40E_FLAG_FD_ATR_ENABLED
) &&
5944 (pf
->auto_disable_flags
& I40E_FLAG_FD_ATR_ENABLED
)) {
5945 pf
->auto_disable_flags
&= ~I40E_FLAG_FD_ATR_ENABLED
;
5946 if (I40E_DEBUG_FD
& pf
->hw
.debug_mask
)
5947 dev_info(&pf
->pdev
->dev
, "ATR is being enabled since we have space in the table now\n");
5951 /* if hw had a problem adding a filter, delete it */
5952 if (pf
->fd_inv
> 0) {
5953 hlist_for_each_entry_safe(filter
, node
,
5954 &pf
->fdir_filter_list
, fdir_node
) {
5955 if (filter
->fd_id
== pf
->fd_inv
) {
5956 hlist_del(&filter
->fdir_node
);
5958 pf
->fdir_pf_active_filters
--;
5964 #define I40E_MIN_FD_FLUSH_INTERVAL 10
5965 #define I40E_MIN_FD_FLUSH_SB_ATR_UNSTABLE 30
5967 * i40e_fdir_flush_and_replay - Function to flush all FD filters and replay SB
5968 * @pf: board private structure
5970 static void i40e_fdir_flush_and_replay(struct i40e_pf
*pf
)
5972 unsigned long min_flush_time
;
5973 int flush_wait_retry
= 50;
5974 bool disable_atr
= false;
5978 if (!(pf
->flags
& (I40E_FLAG_FD_SB_ENABLED
| I40E_FLAG_FD_ATR_ENABLED
)))
5981 if (!time_after(jiffies
, pf
->fd_flush_timestamp
+
5982 (I40E_MIN_FD_FLUSH_INTERVAL
* HZ
)))
5985 /* If the flush is happening too quick and we have mostly SB rules we
5986 * should not re-enable ATR for some time.
5988 min_flush_time
= pf
->fd_flush_timestamp
+
5989 (I40E_MIN_FD_FLUSH_SB_ATR_UNSTABLE
* HZ
);
5990 fd_room
= pf
->fdir_pf_filter_count
- pf
->fdir_pf_active_filters
;
5992 if (!(time_after(jiffies
, min_flush_time
)) &&
5993 (fd_room
< I40E_FDIR_BUFFER_HEAD_ROOM_FOR_ATR
)) {
5994 if (I40E_DEBUG_FD
& pf
->hw
.debug_mask
)
5995 dev_info(&pf
->pdev
->dev
, "ATR disabled, not enough FD filter space.\n");
5999 pf
->fd_flush_timestamp
= jiffies
;
6000 pf
->flags
&= ~I40E_FLAG_FD_ATR_ENABLED
;
6001 /* flush all filters */
6002 wr32(&pf
->hw
, I40E_PFQF_CTL_1
,
6003 I40E_PFQF_CTL_1_CLEARFDTABLE_MASK
);
6004 i40e_flush(&pf
->hw
);
6008 /* Check FD flush status every 5-6msec */
6009 usleep_range(5000, 6000);
6010 reg
= rd32(&pf
->hw
, I40E_PFQF_CTL_1
);
6011 if (!(reg
& I40E_PFQF_CTL_1_CLEARFDTABLE_MASK
))
6013 } while (flush_wait_retry
--);
6014 if (reg
& I40E_PFQF_CTL_1_CLEARFDTABLE_MASK
) {
6015 dev_warn(&pf
->pdev
->dev
, "FD table did not flush, needs more time\n");
6017 /* replay sideband filters */
6018 i40e_fdir_filter_restore(pf
->vsi
[pf
->lan_vsi
]);
6020 pf
->flags
|= I40E_FLAG_FD_ATR_ENABLED
;
6021 clear_bit(__I40E_FD_FLUSH_REQUESTED
, &pf
->state
);
6022 if (I40E_DEBUG_FD
& pf
->hw
.debug_mask
)
6023 dev_info(&pf
->pdev
->dev
, "FD Filter table flushed and FD-SB replayed.\n");
6028 * i40e_get_current_atr_count - Get the count of total FD ATR filters programmed
6029 * @pf: board private structure
6031 u32
i40e_get_current_atr_cnt(struct i40e_pf
*pf
)
6033 return i40e_get_current_fd_count(pf
) - pf
->fdir_pf_active_filters
;
6036 /* We can see up to 256 filter programming desc in transit if the filters are
6037 * being applied really fast; before we see the first
6038 * filter miss error on Rx queue 0. Accumulating enough error messages before
6039 * reacting will make sure we don't cause flush too often.
6041 #define I40E_MAX_FD_PROGRAM_ERROR 256
6044 * i40e_fdir_reinit_subtask - Worker thread to reinit FDIR filter table
6045 * @pf: board private structure
6047 static void i40e_fdir_reinit_subtask(struct i40e_pf
*pf
)
6050 /* if interface is down do nothing */
6051 if (test_bit(__I40E_DOWN
, &pf
->state
))
6054 if (!(pf
->flags
& (I40E_FLAG_FD_SB_ENABLED
| I40E_FLAG_FD_ATR_ENABLED
)))
6057 if (test_bit(__I40E_FD_FLUSH_REQUESTED
, &pf
->state
))
6058 i40e_fdir_flush_and_replay(pf
);
6060 i40e_fdir_check_and_reenable(pf
);
6065 * i40e_vsi_link_event - notify VSI of a link event
6066 * @vsi: vsi to be notified
6067 * @link_up: link up or down
6069 static void i40e_vsi_link_event(struct i40e_vsi
*vsi
, bool link_up
)
6071 if (!vsi
|| test_bit(__I40E_DOWN
, &vsi
->state
))
6074 switch (vsi
->type
) {
6079 if (!vsi
->netdev
|| !vsi
->netdev_registered
)
6083 netif_carrier_on(vsi
->netdev
);
6084 netif_tx_wake_all_queues(vsi
->netdev
);
6086 netif_carrier_off(vsi
->netdev
);
6087 netif_tx_stop_all_queues(vsi
->netdev
);
6091 case I40E_VSI_SRIOV
:
6092 case I40E_VSI_VMDQ2
:
6094 case I40E_VSI_IWARP
:
6095 case I40E_VSI_MIRROR
:
6097 /* there is no notification for other VSIs */
6103 * i40e_veb_link_event - notify elements on the veb of a link event
6104 * @veb: veb to be notified
6105 * @link_up: link up or down
6107 static void i40e_veb_link_event(struct i40e_veb
*veb
, bool link_up
)
6112 if (!veb
|| !veb
->pf
)
6116 /* depth first... */
6117 for (i
= 0; i
< I40E_MAX_VEB
; i
++)
6118 if (pf
->veb
[i
] && (pf
->veb
[i
]->uplink_seid
== veb
->seid
))
6119 i40e_veb_link_event(pf
->veb
[i
], link_up
);
6121 /* ... now the local VSIs */
6122 for (i
= 0; i
< pf
->num_alloc_vsi
; i
++)
6123 if (pf
->vsi
[i
] && (pf
->vsi
[i
]->uplink_seid
== veb
->seid
))
6124 i40e_vsi_link_event(pf
->vsi
[i
], link_up
);
6128 * i40e_link_event - Update netif_carrier status
6129 * @pf: board private structure
6131 static void i40e_link_event(struct i40e_pf
*pf
)
6133 struct i40e_vsi
*vsi
= pf
->vsi
[pf
->lan_vsi
];
6134 u8 new_link_speed
, old_link_speed
;
6136 bool new_link
, old_link
;
6138 /* save off old link status information */
6139 pf
->hw
.phy
.link_info_old
= pf
->hw
.phy
.link_info
;
6141 /* set this to force the get_link_status call to refresh state */
6142 pf
->hw
.phy
.get_link_info
= true;
6144 old_link
= (pf
->hw
.phy
.link_info_old
.link_info
& I40E_AQ_LINK_UP
);
6146 status
= i40e_get_link_status(&pf
->hw
, &new_link
);
6148 dev_dbg(&pf
->pdev
->dev
, "couldn't get link state, status: %d\n",
6153 old_link_speed
= pf
->hw
.phy
.link_info_old
.link_speed
;
6154 new_link_speed
= pf
->hw
.phy
.link_info
.link_speed
;
6156 if (new_link
== old_link
&&
6157 new_link_speed
== old_link_speed
&&
6158 (test_bit(__I40E_DOWN
, &vsi
->state
) ||
6159 new_link
== netif_carrier_ok(vsi
->netdev
)))
6162 if (!test_bit(__I40E_DOWN
, &vsi
->state
))
6163 i40e_print_link_message(vsi
, new_link
);
6165 /* Notify the base of the switch tree connected to
6166 * the link. Floating VEBs are not notified.
6168 if (pf
->lan_veb
!= I40E_NO_VEB
&& pf
->veb
[pf
->lan_veb
])
6169 i40e_veb_link_event(pf
->veb
[pf
->lan_veb
], new_link
);
6171 i40e_vsi_link_event(vsi
, new_link
);
6174 i40e_vc_notify_link_state(pf
);
6176 if (pf
->flags
& I40E_FLAG_PTP
)
6177 i40e_ptp_set_increment(pf
);
6181 * i40e_watchdog_subtask - periodic checks not using event driven response
6182 * @pf: board private structure
6184 static void i40e_watchdog_subtask(struct i40e_pf
*pf
)
6188 /* if interface is down do nothing */
6189 if (test_bit(__I40E_DOWN
, &pf
->state
) ||
6190 test_bit(__I40E_CONFIG_BUSY
, &pf
->state
))
6193 /* make sure we don't do these things too often */
6194 if (time_before(jiffies
, (pf
->service_timer_previous
+
6195 pf
->service_timer_period
)))
6197 pf
->service_timer_previous
= jiffies
;
6199 if (pf
->flags
& I40E_FLAG_LINK_POLLING_ENABLED
)
6200 i40e_link_event(pf
);
6202 /* Update the stats for active netdevs so the network stack
6203 * can look at updated numbers whenever it cares to
6205 for (i
= 0; i
< pf
->num_alloc_vsi
; i
++)
6206 if (pf
->vsi
[i
] && pf
->vsi
[i
]->netdev
)
6207 i40e_update_stats(pf
->vsi
[i
]);
6209 if (pf
->flags
& I40E_FLAG_VEB_STATS_ENABLED
) {
6210 /* Update the stats for the active switching components */
6211 for (i
= 0; i
< I40E_MAX_VEB
; i
++)
6213 i40e_update_veb_stats(pf
->veb
[i
]);
6216 i40e_ptp_rx_hang(pf
->vsi
[pf
->lan_vsi
]);
6220 * i40e_reset_subtask - Set up for resetting the device and driver
6221 * @pf: board private structure
6223 static void i40e_reset_subtask(struct i40e_pf
*pf
)
6225 u32 reset_flags
= 0;
6228 if (test_bit(__I40E_REINIT_REQUESTED
, &pf
->state
)) {
6229 reset_flags
|= BIT(__I40E_REINIT_REQUESTED
);
6230 clear_bit(__I40E_REINIT_REQUESTED
, &pf
->state
);
6232 if (test_bit(__I40E_PF_RESET_REQUESTED
, &pf
->state
)) {
6233 reset_flags
|= BIT(__I40E_PF_RESET_REQUESTED
);
6234 clear_bit(__I40E_PF_RESET_REQUESTED
, &pf
->state
);
6236 if (test_bit(__I40E_CORE_RESET_REQUESTED
, &pf
->state
)) {
6237 reset_flags
|= BIT(__I40E_CORE_RESET_REQUESTED
);
6238 clear_bit(__I40E_CORE_RESET_REQUESTED
, &pf
->state
);
6240 if (test_bit(__I40E_GLOBAL_RESET_REQUESTED
, &pf
->state
)) {
6241 reset_flags
|= BIT(__I40E_GLOBAL_RESET_REQUESTED
);
6242 clear_bit(__I40E_GLOBAL_RESET_REQUESTED
, &pf
->state
);
6244 if (test_bit(__I40E_DOWN_REQUESTED
, &pf
->state
)) {
6245 reset_flags
|= BIT(__I40E_DOWN_REQUESTED
);
6246 clear_bit(__I40E_DOWN_REQUESTED
, &pf
->state
);
6249 /* If there's a recovery already waiting, it takes
6250 * precedence before starting a new reset sequence.
6252 if (test_bit(__I40E_RESET_INTR_RECEIVED
, &pf
->state
)) {
6253 i40e_handle_reset_warning(pf
);
6257 /* If we're already down or resetting, just bail */
6259 !test_bit(__I40E_DOWN
, &pf
->state
) &&
6260 !test_bit(__I40E_CONFIG_BUSY
, &pf
->state
))
6261 i40e_do_reset(pf
, reset_flags
);
6268 * i40e_handle_link_event - Handle link event
6269 * @pf: board private structure
6270 * @e: event info posted on ARQ
6272 static void i40e_handle_link_event(struct i40e_pf
*pf
,
6273 struct i40e_arq_event_info
*e
)
6275 struct i40e_aqc_get_link_status
*status
=
6276 (struct i40e_aqc_get_link_status
*)&e
->desc
.params
.raw
;
6278 /* Do a new status request to re-enable LSE reporting
6279 * and load new status information into the hw struct
6280 * This completely ignores any state information
6281 * in the ARQ event info, instead choosing to always
6282 * issue the AQ update link status command.
6284 i40e_link_event(pf
);
6286 /* check for unqualified module, if link is down */
6287 if ((status
->link_info
& I40E_AQ_MEDIA_AVAILABLE
) &&
6288 (!(status
->an_info
& I40E_AQ_QUALIFIED_MODULE
)) &&
6289 (!(status
->link_info
& I40E_AQ_LINK_UP
)))
6290 dev_err(&pf
->pdev
->dev
,
6291 "The driver failed to link because an unqualified module was detected.\n");
6295 * i40e_clean_adminq_subtask - Clean the AdminQ rings
6296 * @pf: board private structure
6298 static void i40e_clean_adminq_subtask(struct i40e_pf
*pf
)
6300 struct i40e_arq_event_info event
;
6301 struct i40e_hw
*hw
= &pf
->hw
;
6308 /* Do not run clean AQ when PF reset fails */
6309 if (test_bit(__I40E_RESET_FAILED
, &pf
->state
))
6312 /* check for error indications */
6313 val
= rd32(&pf
->hw
, pf
->hw
.aq
.arq
.len
);
6315 if (val
& I40E_PF_ARQLEN_ARQVFE_MASK
) {
6316 if (hw
->debug_mask
& I40E_DEBUG_AQ
)
6317 dev_info(&pf
->pdev
->dev
, "ARQ VF Error detected\n");
6318 val
&= ~I40E_PF_ARQLEN_ARQVFE_MASK
;
6320 if (val
& I40E_PF_ARQLEN_ARQOVFL_MASK
) {
6321 if (hw
->debug_mask
& I40E_DEBUG_AQ
)
6322 dev_info(&pf
->pdev
->dev
, "ARQ Overflow Error detected\n");
6323 val
&= ~I40E_PF_ARQLEN_ARQOVFL_MASK
;
6324 pf
->arq_overflows
++;
6326 if (val
& I40E_PF_ARQLEN_ARQCRIT_MASK
) {
6327 if (hw
->debug_mask
& I40E_DEBUG_AQ
)
6328 dev_info(&pf
->pdev
->dev
, "ARQ Critical Error detected\n");
6329 val
&= ~I40E_PF_ARQLEN_ARQCRIT_MASK
;
6332 wr32(&pf
->hw
, pf
->hw
.aq
.arq
.len
, val
);
6334 val
= rd32(&pf
->hw
, pf
->hw
.aq
.asq
.len
);
6336 if (val
& I40E_PF_ATQLEN_ATQVFE_MASK
) {
6337 if (pf
->hw
.debug_mask
& I40E_DEBUG_AQ
)
6338 dev_info(&pf
->pdev
->dev
, "ASQ VF Error detected\n");
6339 val
&= ~I40E_PF_ATQLEN_ATQVFE_MASK
;
6341 if (val
& I40E_PF_ATQLEN_ATQOVFL_MASK
) {
6342 if (pf
->hw
.debug_mask
& I40E_DEBUG_AQ
)
6343 dev_info(&pf
->pdev
->dev
, "ASQ Overflow Error detected\n");
6344 val
&= ~I40E_PF_ATQLEN_ATQOVFL_MASK
;
6346 if (val
& I40E_PF_ATQLEN_ATQCRIT_MASK
) {
6347 if (pf
->hw
.debug_mask
& I40E_DEBUG_AQ
)
6348 dev_info(&pf
->pdev
->dev
, "ASQ Critical Error detected\n");
6349 val
&= ~I40E_PF_ATQLEN_ATQCRIT_MASK
;
6352 wr32(&pf
->hw
, pf
->hw
.aq
.asq
.len
, val
);
6354 event
.buf_len
= I40E_MAX_AQ_BUF_SIZE
;
6355 event
.msg_buf
= kzalloc(event
.buf_len
, GFP_KERNEL
);
6360 ret
= i40e_clean_arq_element(hw
, &event
, &pending
);
6361 if (ret
== I40E_ERR_ADMIN_QUEUE_NO_WORK
)
6364 dev_info(&pf
->pdev
->dev
, "ARQ event error %d\n", ret
);
6368 opcode
= le16_to_cpu(event
.desc
.opcode
);
6371 case i40e_aqc_opc_get_link_status
:
6372 i40e_handle_link_event(pf
, &event
);
6374 case i40e_aqc_opc_send_msg_to_pf
:
6375 ret
= i40e_vc_process_vf_msg(pf
,
6376 le16_to_cpu(event
.desc
.retval
),
6377 le32_to_cpu(event
.desc
.cookie_high
),
6378 le32_to_cpu(event
.desc
.cookie_low
),
6382 case i40e_aqc_opc_lldp_update_mib
:
6383 dev_dbg(&pf
->pdev
->dev
, "ARQ: Update LLDP MIB event received\n");
6384 #ifdef CONFIG_I40E_DCB
6386 ret
= i40e_handle_lldp_event(pf
, &event
);
6388 #endif /* CONFIG_I40E_DCB */
6390 case i40e_aqc_opc_event_lan_overflow
:
6391 dev_dbg(&pf
->pdev
->dev
, "ARQ LAN queue overflow event received\n");
6392 i40e_handle_lan_overflow_event(pf
, &event
);
6394 case i40e_aqc_opc_send_msg_to_peer
:
6395 dev_info(&pf
->pdev
->dev
, "ARQ: Msg from other pf\n");
6397 case i40e_aqc_opc_nvm_erase
:
6398 case i40e_aqc_opc_nvm_update
:
6399 case i40e_aqc_opc_oem_post_update
:
6400 i40e_debug(&pf
->hw
, I40E_DEBUG_NVM
,
6401 "ARQ NVM operation 0x%04x completed\n",
6405 dev_info(&pf
->pdev
->dev
,
6406 "ARQ: Unknown event 0x%04x ignored\n",
6410 } while (pending
&& (i
++ < pf
->adminq_work_limit
));
6412 clear_bit(__I40E_ADMINQ_EVENT_PENDING
, &pf
->state
);
6413 /* re-enable Admin queue interrupt cause */
6414 val
= rd32(hw
, I40E_PFINT_ICR0_ENA
);
6415 val
|= I40E_PFINT_ICR0_ENA_ADMINQ_MASK
;
6416 wr32(hw
, I40E_PFINT_ICR0_ENA
, val
);
6419 kfree(event
.msg_buf
);
6423 * i40e_verify_eeprom - make sure eeprom is good to use
6424 * @pf: board private structure
6426 static void i40e_verify_eeprom(struct i40e_pf
*pf
)
6430 err
= i40e_diag_eeprom_test(&pf
->hw
);
6432 /* retry in case of garbage read */
6433 err
= i40e_diag_eeprom_test(&pf
->hw
);
6435 dev_info(&pf
->pdev
->dev
, "eeprom check failed (%d), Tx/Rx traffic disabled\n",
6437 set_bit(__I40E_BAD_EEPROM
, &pf
->state
);
6441 if (!err
&& test_bit(__I40E_BAD_EEPROM
, &pf
->state
)) {
6442 dev_info(&pf
->pdev
->dev
, "eeprom check passed, Tx/Rx traffic enabled\n");
6443 clear_bit(__I40E_BAD_EEPROM
, &pf
->state
);
6448 * i40e_enable_pf_switch_lb
6449 * @pf: pointer to the PF structure
6451 * enable switch loop back or die - no point in a return value
6453 static void i40e_enable_pf_switch_lb(struct i40e_pf
*pf
)
6455 struct i40e_vsi
*vsi
= pf
->vsi
[pf
->lan_vsi
];
6456 struct i40e_vsi_context ctxt
;
6459 ctxt
.seid
= pf
->main_vsi_seid
;
6460 ctxt
.pf_num
= pf
->hw
.pf_id
;
6462 ret
= i40e_aq_get_vsi_params(&pf
->hw
, &ctxt
, NULL
);
6464 dev_info(&pf
->pdev
->dev
,
6465 "couldn't get PF vsi config, err %s aq_err %s\n",
6466 i40e_stat_str(&pf
->hw
, ret
),
6467 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
6470 ctxt
.flags
= I40E_AQ_VSI_TYPE_PF
;
6471 ctxt
.info
.valid_sections
= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID
);
6472 ctxt
.info
.switch_id
|= cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB
);
6474 ret
= i40e_aq_update_vsi_params(&vsi
->back
->hw
, &ctxt
, NULL
);
6476 dev_info(&pf
->pdev
->dev
,
6477 "update vsi switch failed, err %s aq_err %s\n",
6478 i40e_stat_str(&pf
->hw
, ret
),
6479 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
6484 * i40e_disable_pf_switch_lb
6485 * @pf: pointer to the PF structure
6487 * disable switch loop back or die - no point in a return value
6489 static void i40e_disable_pf_switch_lb(struct i40e_pf
*pf
)
6491 struct i40e_vsi
*vsi
= pf
->vsi
[pf
->lan_vsi
];
6492 struct i40e_vsi_context ctxt
;
6495 ctxt
.seid
= pf
->main_vsi_seid
;
6496 ctxt
.pf_num
= pf
->hw
.pf_id
;
6498 ret
= i40e_aq_get_vsi_params(&pf
->hw
, &ctxt
, NULL
);
6500 dev_info(&pf
->pdev
->dev
,
6501 "couldn't get PF vsi config, err %s aq_err %s\n",
6502 i40e_stat_str(&pf
->hw
, ret
),
6503 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
6506 ctxt
.flags
= I40E_AQ_VSI_TYPE_PF
;
6507 ctxt
.info
.valid_sections
= cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID
);
6508 ctxt
.info
.switch_id
&= ~cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB
);
6510 ret
= i40e_aq_update_vsi_params(&vsi
->back
->hw
, &ctxt
, NULL
);
6512 dev_info(&pf
->pdev
->dev
,
6513 "update vsi switch failed, err %s aq_err %s\n",
6514 i40e_stat_str(&pf
->hw
, ret
),
6515 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
6520 * i40e_config_bridge_mode - Configure the HW bridge mode
6521 * @veb: pointer to the bridge instance
6523 * Configure the loop back mode for the LAN VSI that is downlink to the
6524 * specified HW bridge instance. It is expected this function is called
6525 * when a new HW bridge is instantiated.
6527 static void i40e_config_bridge_mode(struct i40e_veb
*veb
)
6529 struct i40e_pf
*pf
= veb
->pf
;
6531 if (pf
->hw
.debug_mask
& I40E_DEBUG_LAN
)
6532 dev_info(&pf
->pdev
->dev
, "enabling bridge mode: %s\n",
6533 veb
->bridge_mode
== BRIDGE_MODE_VEPA
? "VEPA" : "VEB");
6534 if (veb
->bridge_mode
& BRIDGE_MODE_VEPA
)
6535 i40e_disable_pf_switch_lb(pf
);
6537 i40e_enable_pf_switch_lb(pf
);
6541 * i40e_reconstitute_veb - rebuild the VEB and anything connected to it
6542 * @veb: pointer to the VEB instance
6544 * This is a recursive function that first builds the attached VSIs then
6545 * recurses in to build the next layer of VEB. We track the connections
6546 * through our own index numbers because the seid's from the HW could
6547 * change across the reset.
6549 static int i40e_reconstitute_veb(struct i40e_veb
*veb
)
6551 struct i40e_vsi
*ctl_vsi
= NULL
;
6552 struct i40e_pf
*pf
= veb
->pf
;
6556 /* build VSI that owns this VEB, temporarily attached to base VEB */
6557 for (v
= 0; v
< pf
->num_alloc_vsi
&& !ctl_vsi
; v
++) {
6559 pf
->vsi
[v
]->veb_idx
== veb
->idx
&&
6560 pf
->vsi
[v
]->flags
& I40E_VSI_FLAG_VEB_OWNER
) {
6561 ctl_vsi
= pf
->vsi
[v
];
6566 dev_info(&pf
->pdev
->dev
,
6567 "missing owner VSI for veb_idx %d\n", veb
->idx
);
6569 goto end_reconstitute
;
6571 if (ctl_vsi
!= pf
->vsi
[pf
->lan_vsi
])
6572 ctl_vsi
->uplink_seid
= pf
->vsi
[pf
->lan_vsi
]->uplink_seid
;
6573 ret
= i40e_add_vsi(ctl_vsi
);
6575 dev_info(&pf
->pdev
->dev
,
6576 "rebuild of veb_idx %d owner VSI failed: %d\n",
6578 goto end_reconstitute
;
6580 i40e_vsi_reset_stats(ctl_vsi
);
6582 /* create the VEB in the switch and move the VSI onto the VEB */
6583 ret
= i40e_add_veb(veb
, ctl_vsi
);
6585 goto end_reconstitute
;
6587 if (pf
->flags
& I40E_FLAG_VEB_MODE_ENABLED
)
6588 veb
->bridge_mode
= BRIDGE_MODE_VEB
;
6590 veb
->bridge_mode
= BRIDGE_MODE_VEPA
;
6591 i40e_config_bridge_mode(veb
);
6593 /* create the remaining VSIs attached to this VEB */
6594 for (v
= 0; v
< pf
->num_alloc_vsi
; v
++) {
6595 if (!pf
->vsi
[v
] || pf
->vsi
[v
] == ctl_vsi
)
6598 if (pf
->vsi
[v
]->veb_idx
== veb
->idx
) {
6599 struct i40e_vsi
*vsi
= pf
->vsi
[v
];
6601 vsi
->uplink_seid
= veb
->seid
;
6602 ret
= i40e_add_vsi(vsi
);
6604 dev_info(&pf
->pdev
->dev
,
6605 "rebuild of vsi_idx %d failed: %d\n",
6607 goto end_reconstitute
;
6609 i40e_vsi_reset_stats(vsi
);
6613 /* create any VEBs attached to this VEB - RECURSION */
6614 for (veb_idx
= 0; veb_idx
< I40E_MAX_VEB
; veb_idx
++) {
6615 if (pf
->veb
[veb_idx
] && pf
->veb
[veb_idx
]->veb_idx
== veb
->idx
) {
6616 pf
->veb
[veb_idx
]->uplink_seid
= veb
->seid
;
6617 ret
= i40e_reconstitute_veb(pf
->veb
[veb_idx
]);
6628 * i40e_get_capabilities - get info about the HW
6629 * @pf: the PF struct
6631 static int i40e_get_capabilities(struct i40e_pf
*pf
)
6633 struct i40e_aqc_list_capabilities_element_resp
*cap_buf
;
6638 buf_len
= 40 * sizeof(struct i40e_aqc_list_capabilities_element_resp
);
6640 cap_buf
= kzalloc(buf_len
, GFP_KERNEL
);
6644 /* this loads the data into the hw struct for us */
6645 err
= i40e_aq_discover_capabilities(&pf
->hw
, cap_buf
, buf_len
,
6647 i40e_aqc_opc_list_func_capabilities
,
6649 /* data loaded, buffer no longer needed */
6652 if (pf
->hw
.aq
.asq_last_status
== I40E_AQ_RC_ENOMEM
) {
6653 /* retry with a larger buffer */
6654 buf_len
= data_size
;
6655 } else if (pf
->hw
.aq
.asq_last_status
!= I40E_AQ_RC_OK
) {
6656 dev_info(&pf
->pdev
->dev
,
6657 "capability discovery failed, err %s aq_err %s\n",
6658 i40e_stat_str(&pf
->hw
, err
),
6659 i40e_aq_str(&pf
->hw
,
6660 pf
->hw
.aq
.asq_last_status
));
6665 if (pf
->hw
.debug_mask
& I40E_DEBUG_USER
)
6666 dev_info(&pf
->pdev
->dev
,
6667 "pf=%d, num_vfs=%d, msix_pf=%d, msix_vf=%d, fd_g=%d, fd_b=%d, pf_max_q=%d num_vsi=%d\n",
6668 pf
->hw
.pf_id
, pf
->hw
.func_caps
.num_vfs
,
6669 pf
->hw
.func_caps
.num_msix_vectors
,
6670 pf
->hw
.func_caps
.num_msix_vectors_vf
,
6671 pf
->hw
.func_caps
.fd_filters_guaranteed
,
6672 pf
->hw
.func_caps
.fd_filters_best_effort
,
6673 pf
->hw
.func_caps
.num_tx_qp
,
6674 pf
->hw
.func_caps
.num_vsis
);
6676 #define DEF_NUM_VSI (1 + (pf->hw.func_caps.fcoe ? 1 : 0) \
6677 + pf->hw.func_caps.num_vfs)
6678 if (pf
->hw
.revision_id
== 0 && (DEF_NUM_VSI
> pf
->hw
.func_caps
.num_vsis
)) {
6679 dev_info(&pf
->pdev
->dev
,
6680 "got num_vsis %d, setting num_vsis to %d\n",
6681 pf
->hw
.func_caps
.num_vsis
, DEF_NUM_VSI
);
6682 pf
->hw
.func_caps
.num_vsis
= DEF_NUM_VSI
;
6688 static int i40e_vsi_clear(struct i40e_vsi
*vsi
);
6691 * i40e_fdir_sb_setup - initialize the Flow Director resources for Sideband
6692 * @pf: board private structure
6694 static void i40e_fdir_sb_setup(struct i40e_pf
*pf
)
6696 struct i40e_vsi
*vsi
;
6699 /* quick workaround for an NVM issue that leaves a critical register
6702 if (!rd32(&pf
->hw
, I40E_GLQF_HKEY(0))) {
6703 static const u32 hkey
[] = {
6704 0xe640d33f, 0xcdfe98ab, 0x73fa7161, 0x0d7a7d36,
6705 0xeacb7d61, 0xaa4f05b6, 0x9c5c89ed, 0xfc425ddb,
6706 0xa4654832, 0xfc7461d4, 0x8f827619, 0xf5c63c21,
6709 for (i
= 0; i
<= I40E_GLQF_HKEY_MAX_INDEX
; i
++)
6710 wr32(&pf
->hw
, I40E_GLQF_HKEY(i
), hkey
[i
]);
6713 if (!(pf
->flags
& I40E_FLAG_FD_SB_ENABLED
))
6716 /* find existing VSI and see if it needs configuring */
6718 for (i
= 0; i
< pf
->num_alloc_vsi
; i
++) {
6719 if (pf
->vsi
[i
] && pf
->vsi
[i
]->type
== I40E_VSI_FDIR
) {
6725 /* create a new VSI if none exists */
6727 vsi
= i40e_vsi_setup(pf
, I40E_VSI_FDIR
,
6728 pf
->vsi
[pf
->lan_vsi
]->seid
, 0);
6730 dev_info(&pf
->pdev
->dev
, "Couldn't create FDir VSI\n");
6731 pf
->flags
&= ~I40E_FLAG_FD_SB_ENABLED
;
6736 i40e_vsi_setup_irqhandler(vsi
, i40e_fdir_clean_ring
);
6740 * i40e_fdir_teardown - release the Flow Director resources
6741 * @pf: board private structure
6743 static void i40e_fdir_teardown(struct i40e_pf
*pf
)
6747 i40e_fdir_filter_exit(pf
);
6748 for (i
= 0; i
< pf
->num_alloc_vsi
; i
++) {
6749 if (pf
->vsi
[i
] && pf
->vsi
[i
]->type
== I40E_VSI_FDIR
) {
6750 i40e_vsi_release(pf
->vsi
[i
]);
6757 * i40e_prep_for_reset - prep for the core to reset
6758 * @pf: board private structure
6760 * Close up the VFs and other things in prep for PF Reset.
6762 static void i40e_prep_for_reset(struct i40e_pf
*pf
)
6764 struct i40e_hw
*hw
= &pf
->hw
;
6765 i40e_status ret
= 0;
6768 clear_bit(__I40E_RESET_INTR_RECEIVED
, &pf
->state
);
6769 if (test_and_set_bit(__I40E_RESET_RECOVERY_PENDING
, &pf
->state
))
6771 if (i40e_check_asq_alive(&pf
->hw
))
6772 i40e_vc_notify_reset(pf
);
6774 dev_dbg(&pf
->pdev
->dev
, "Tearing down internal switch for reset\n");
6776 /* quiesce the VSIs and their queues that are not already DOWN */
6777 i40e_pf_quiesce_all_vsi(pf
);
6779 for (v
= 0; v
< pf
->num_alloc_vsi
; v
++) {
6781 pf
->vsi
[v
]->seid
= 0;
6784 i40e_shutdown_adminq(&pf
->hw
);
6786 /* call shutdown HMC */
6787 if (hw
->hmc
.hmc_obj
) {
6788 ret
= i40e_shutdown_lan_hmc(hw
);
6790 dev_warn(&pf
->pdev
->dev
,
6791 "shutdown_lan_hmc failed: %d\n", ret
);
6796 * i40e_send_version - update firmware with driver version
6799 static void i40e_send_version(struct i40e_pf
*pf
)
6801 struct i40e_driver_version dv
;
6803 dv
.major_version
= DRV_VERSION_MAJOR
;
6804 dv
.minor_version
= DRV_VERSION_MINOR
;
6805 dv
.build_version
= DRV_VERSION_BUILD
;
6806 dv
.subbuild_version
= 0;
6807 strlcpy(dv
.driver_string
, DRV_VERSION
, sizeof(dv
.driver_string
));
6808 i40e_aq_send_driver_version(&pf
->hw
, &dv
, NULL
);
6812 * i40e_reset_and_rebuild - reset and rebuild using a saved config
6813 * @pf: board private structure
6814 * @reinit: if the Main VSI needs to re-initialized.
6816 static void i40e_reset_and_rebuild(struct i40e_pf
*pf
, bool reinit
)
6818 struct i40e_hw
*hw
= &pf
->hw
;
6819 u8 set_fc_aq_fail
= 0;
6824 /* Now we wait for GRST to settle out.
6825 * We don't have to delete the VEBs or VSIs from the hw switch
6826 * because the reset will make them disappear.
6828 ret
= i40e_pf_reset(hw
);
6830 dev_info(&pf
->pdev
->dev
, "PF reset failed, %d\n", ret
);
6831 set_bit(__I40E_RESET_FAILED
, &pf
->state
);
6832 goto clear_recovery
;
6836 if (test_bit(__I40E_DOWN
, &pf
->state
))
6837 goto clear_recovery
;
6838 dev_dbg(&pf
->pdev
->dev
, "Rebuilding internal switch\n");
6840 /* rebuild the basics for the AdminQ, HMC, and initial HW switch */
6841 ret
= i40e_init_adminq(&pf
->hw
);
6843 dev_info(&pf
->pdev
->dev
, "Rebuild AdminQ failed, err %s aq_err %s\n",
6844 i40e_stat_str(&pf
->hw
, ret
),
6845 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
6846 goto clear_recovery
;
6849 /* re-verify the eeprom if we just had an EMP reset */
6850 if (test_and_clear_bit(__I40E_EMP_RESET_INTR_RECEIVED
, &pf
->state
))
6851 i40e_verify_eeprom(pf
);
6853 i40e_clear_pxe_mode(hw
);
6854 ret
= i40e_get_capabilities(pf
);
6856 goto end_core_reset
;
6858 ret
= i40e_init_lan_hmc(hw
, hw
->func_caps
.num_tx_qp
,
6859 hw
->func_caps
.num_rx_qp
,
6860 pf
->fcoe_hmc_cntx_num
, pf
->fcoe_hmc_filt_num
);
6862 dev_info(&pf
->pdev
->dev
, "init_lan_hmc failed: %d\n", ret
);
6863 goto end_core_reset
;
6865 ret
= i40e_configure_lan_hmc(hw
, I40E_HMC_MODEL_DIRECT_ONLY
);
6867 dev_info(&pf
->pdev
->dev
, "configure_lan_hmc failed: %d\n", ret
);
6868 goto end_core_reset
;
6871 #ifdef CONFIG_I40E_DCB
6872 ret
= i40e_init_pf_dcb(pf
);
6874 dev_info(&pf
->pdev
->dev
, "DCB init failed %d, disabled\n", ret
);
6875 pf
->flags
&= ~I40E_FLAG_DCB_CAPABLE
;
6876 /* Continue without DCB enabled */
6878 #endif /* CONFIG_I40E_DCB */
6880 i40e_init_pf_fcoe(pf
);
6883 /* do basic switch setup */
6884 ret
= i40e_setup_pf_switch(pf
, reinit
);
6886 goto end_core_reset
;
6888 /* The driver only wants link up/down and module qualification
6889 * reports from firmware. Note the negative logic.
6891 ret
= i40e_aq_set_phy_int_mask(&pf
->hw
,
6892 ~(I40E_AQ_EVENT_LINK_UPDOWN
|
6893 I40E_AQ_EVENT_MEDIA_NA
|
6894 I40E_AQ_EVENT_MODULE_QUAL_FAIL
), NULL
);
6896 dev_info(&pf
->pdev
->dev
, "set phy mask fail, err %s aq_err %s\n",
6897 i40e_stat_str(&pf
->hw
, ret
),
6898 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
6900 /* make sure our flow control settings are restored */
6901 ret
= i40e_set_fc(&pf
->hw
, &set_fc_aq_fail
, true);
6903 dev_dbg(&pf
->pdev
->dev
, "setting flow control: ret = %s last_status = %s\n",
6904 i40e_stat_str(&pf
->hw
, ret
),
6905 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
6907 /* Rebuild the VSIs and VEBs that existed before reset.
6908 * They are still in our local switch element arrays, so only
6909 * need to rebuild the switch model in the HW.
6911 * If there were VEBs but the reconstitution failed, we'll try
6912 * try to recover minimal use by getting the basic PF VSI working.
6914 if (pf
->vsi
[pf
->lan_vsi
]->uplink_seid
!= pf
->mac_seid
) {
6915 dev_dbg(&pf
->pdev
->dev
, "attempting to rebuild switch\n");
6916 /* find the one VEB connected to the MAC, and find orphans */
6917 for (v
= 0; v
< I40E_MAX_VEB
; v
++) {
6921 if (pf
->veb
[v
]->uplink_seid
== pf
->mac_seid
||
6922 pf
->veb
[v
]->uplink_seid
== 0) {
6923 ret
= i40e_reconstitute_veb(pf
->veb
[v
]);
6928 /* If Main VEB failed, we're in deep doodoo,
6929 * so give up rebuilding the switch and set up
6930 * for minimal rebuild of PF VSI.
6931 * If orphan failed, we'll report the error
6932 * but try to keep going.
6934 if (pf
->veb
[v
]->uplink_seid
== pf
->mac_seid
) {
6935 dev_info(&pf
->pdev
->dev
,
6936 "rebuild of switch failed: %d, will try to set up simple PF connection\n",
6938 pf
->vsi
[pf
->lan_vsi
]->uplink_seid
6941 } else if (pf
->veb
[v
]->uplink_seid
== 0) {
6942 dev_info(&pf
->pdev
->dev
,
6943 "rebuild of orphan VEB failed: %d\n",
6950 if (pf
->vsi
[pf
->lan_vsi
]->uplink_seid
== pf
->mac_seid
) {
6951 dev_dbg(&pf
->pdev
->dev
, "attempting to rebuild PF VSI\n");
6952 /* no VEB, so rebuild only the Main VSI */
6953 ret
= i40e_add_vsi(pf
->vsi
[pf
->lan_vsi
]);
6955 dev_info(&pf
->pdev
->dev
,
6956 "rebuild of Main VSI failed: %d\n", ret
);
6957 goto end_core_reset
;
6961 /* Reconfigure hardware for allowing smaller MSS in the case
6962 * of TSO, so that we avoid the MDD being fired and causing
6963 * a reset in the case of small MSS+TSO.
6965 #define I40E_REG_MSS 0x000E64DC
6966 #define I40E_REG_MSS_MIN_MASK 0x3FF0000
6967 #define I40E_64BYTE_MSS 0x400000
6968 val
= rd32(hw
, I40E_REG_MSS
);
6969 if ((val
& I40E_REG_MSS_MIN_MASK
) > I40E_64BYTE_MSS
) {
6970 val
&= ~I40E_REG_MSS_MIN_MASK
;
6971 val
|= I40E_64BYTE_MSS
;
6972 wr32(hw
, I40E_REG_MSS
, val
);
6975 if (pf
->flags
& I40E_FLAG_RESTART_AUTONEG
) {
6977 ret
= i40e_aq_set_link_restart_an(&pf
->hw
, true, NULL
);
6979 dev_info(&pf
->pdev
->dev
, "link restart failed, err %s aq_err %s\n",
6980 i40e_stat_str(&pf
->hw
, ret
),
6981 i40e_aq_str(&pf
->hw
,
6982 pf
->hw
.aq
.asq_last_status
));
6984 /* reinit the misc interrupt */
6985 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
)
6986 ret
= i40e_setup_misc_vector(pf
);
6988 /* Add a filter to drop all Flow control frames from any VSI from being
6989 * transmitted. By doing so we stop a malicious VF from sending out
6990 * PAUSE or PFC frames and potentially controlling traffic for other
6992 * The FW can still send Flow control frames if enabled.
6994 i40e_add_filter_to_drop_tx_flow_control_frames(&pf
->hw
,
6997 /* restart the VSIs that were rebuilt and running before the reset */
6998 i40e_pf_unquiesce_all_vsi(pf
);
7000 if (pf
->num_alloc_vfs
) {
7001 for (v
= 0; v
< pf
->num_alloc_vfs
; v
++)
7002 i40e_reset_vf(&pf
->vf
[v
], true);
7005 /* tell the firmware that we're starting */
7006 i40e_send_version(pf
);
7009 clear_bit(__I40E_RESET_FAILED
, &pf
->state
);
7011 clear_bit(__I40E_RESET_RECOVERY_PENDING
, &pf
->state
);
7015 * i40e_handle_reset_warning - prep for the PF to reset, reset and rebuild
7016 * @pf: board private structure
7018 * Close up the VFs and other things in prep for a Core Reset,
7019 * then get ready to rebuild the world.
7021 static void i40e_handle_reset_warning(struct i40e_pf
*pf
)
7023 i40e_prep_for_reset(pf
);
7024 i40e_reset_and_rebuild(pf
, false);
7028 * i40e_handle_mdd_event
7029 * @pf: pointer to the PF structure
7031 * Called from the MDD irq handler to identify possibly malicious vfs
7033 static void i40e_handle_mdd_event(struct i40e_pf
*pf
)
7035 struct i40e_hw
*hw
= &pf
->hw
;
7036 bool mdd_detected
= false;
7037 bool pf_mdd_detected
= false;
7042 if (!test_bit(__I40E_MDD_EVENT_PENDING
, &pf
->state
))
7045 /* find what triggered the MDD event */
7046 reg
= rd32(hw
, I40E_GL_MDET_TX
);
7047 if (reg
& I40E_GL_MDET_TX_VALID_MASK
) {
7048 u8 pf_num
= (reg
& I40E_GL_MDET_TX_PF_NUM_MASK
) >>
7049 I40E_GL_MDET_TX_PF_NUM_SHIFT
;
7050 u16 vf_num
= (reg
& I40E_GL_MDET_TX_VF_NUM_MASK
) >>
7051 I40E_GL_MDET_TX_VF_NUM_SHIFT
;
7052 u8 event
= (reg
& I40E_GL_MDET_TX_EVENT_MASK
) >>
7053 I40E_GL_MDET_TX_EVENT_SHIFT
;
7054 u16 queue
= ((reg
& I40E_GL_MDET_TX_QUEUE_MASK
) >>
7055 I40E_GL_MDET_TX_QUEUE_SHIFT
) -
7056 pf
->hw
.func_caps
.base_queue
;
7057 if (netif_msg_tx_err(pf
))
7058 dev_info(&pf
->pdev
->dev
, "Malicious Driver Detection event 0x%02x on TX queue %d PF number 0x%02x VF number 0x%02x\n",
7059 event
, queue
, pf_num
, vf_num
);
7060 wr32(hw
, I40E_GL_MDET_TX
, 0xffffffff);
7061 mdd_detected
= true;
7063 reg
= rd32(hw
, I40E_GL_MDET_RX
);
7064 if (reg
& I40E_GL_MDET_RX_VALID_MASK
) {
7065 u8 func
= (reg
& I40E_GL_MDET_RX_FUNCTION_MASK
) >>
7066 I40E_GL_MDET_RX_FUNCTION_SHIFT
;
7067 u8 event
= (reg
& I40E_GL_MDET_RX_EVENT_MASK
) >>
7068 I40E_GL_MDET_RX_EVENT_SHIFT
;
7069 u16 queue
= ((reg
& I40E_GL_MDET_RX_QUEUE_MASK
) >>
7070 I40E_GL_MDET_RX_QUEUE_SHIFT
) -
7071 pf
->hw
.func_caps
.base_queue
;
7072 if (netif_msg_rx_err(pf
))
7073 dev_info(&pf
->pdev
->dev
, "Malicious Driver Detection event 0x%02x on RX queue %d of function 0x%02x\n",
7074 event
, queue
, func
);
7075 wr32(hw
, I40E_GL_MDET_RX
, 0xffffffff);
7076 mdd_detected
= true;
7080 reg
= rd32(hw
, I40E_PF_MDET_TX
);
7081 if (reg
& I40E_PF_MDET_TX_VALID_MASK
) {
7082 wr32(hw
, I40E_PF_MDET_TX
, 0xFFFF);
7083 dev_info(&pf
->pdev
->dev
, "TX driver issue detected, PF reset issued\n");
7084 pf_mdd_detected
= true;
7086 reg
= rd32(hw
, I40E_PF_MDET_RX
);
7087 if (reg
& I40E_PF_MDET_RX_VALID_MASK
) {
7088 wr32(hw
, I40E_PF_MDET_RX
, 0xFFFF);
7089 dev_info(&pf
->pdev
->dev
, "RX driver issue detected, PF reset issued\n");
7090 pf_mdd_detected
= true;
7092 /* Queue belongs to the PF, initiate a reset */
7093 if (pf_mdd_detected
) {
7094 set_bit(__I40E_PF_RESET_REQUESTED
, &pf
->state
);
7095 i40e_service_event_schedule(pf
);
7099 /* see if one of the VFs needs its hand slapped */
7100 for (i
= 0; i
< pf
->num_alloc_vfs
&& mdd_detected
; i
++) {
7102 reg
= rd32(hw
, I40E_VP_MDET_TX(i
));
7103 if (reg
& I40E_VP_MDET_TX_VALID_MASK
) {
7104 wr32(hw
, I40E_VP_MDET_TX(i
), 0xFFFF);
7105 vf
->num_mdd_events
++;
7106 dev_info(&pf
->pdev
->dev
, "TX driver issue detected on VF %d\n",
7110 reg
= rd32(hw
, I40E_VP_MDET_RX(i
));
7111 if (reg
& I40E_VP_MDET_RX_VALID_MASK
) {
7112 wr32(hw
, I40E_VP_MDET_RX(i
), 0xFFFF);
7113 vf
->num_mdd_events
++;
7114 dev_info(&pf
->pdev
->dev
, "RX driver issue detected on VF %d\n",
7118 if (vf
->num_mdd_events
> I40E_DEFAULT_NUM_MDD_EVENTS_ALLOWED
) {
7119 dev_info(&pf
->pdev
->dev
,
7120 "Too many MDD events on VF %d, disabled\n", i
);
7121 dev_info(&pf
->pdev
->dev
,
7122 "Use PF Control I/F to re-enable the VF\n");
7123 set_bit(I40E_VF_STAT_DISABLED
, &vf
->vf_states
);
7127 /* re-enable mdd interrupt cause */
7128 clear_bit(__I40E_MDD_EVENT_PENDING
, &pf
->state
);
7129 reg
= rd32(hw
, I40E_PFINT_ICR0_ENA
);
7130 reg
|= I40E_PFINT_ICR0_ENA_MAL_DETECT_MASK
;
7131 wr32(hw
, I40E_PFINT_ICR0_ENA
, reg
);
7136 * i40e_sync_udp_filters_subtask - Sync the VSI filter list with HW
7137 * @pf: board private structure
7139 static void i40e_sync_udp_filters_subtask(struct i40e_pf
*pf
)
7141 struct i40e_hw
*hw
= &pf
->hw
;
7146 if (!(pf
->flags
& I40E_FLAG_UDP_FILTER_SYNC
))
7149 pf
->flags
&= ~I40E_FLAG_UDP_FILTER_SYNC
;
7151 for (i
= 0; i
< I40E_MAX_PF_UDP_OFFLOAD_PORTS
; i
++) {
7152 if (pf
->pending_udp_bitmap
& BIT_ULL(i
)) {
7153 pf
->pending_udp_bitmap
&= ~BIT_ULL(i
);
7154 port
= pf
->udp_ports
[i
].index
;
7156 ret
= i40e_aq_add_udp_tunnel(hw
, ntohs(port
),
7157 pf
->udp_ports
[i
].type
,
7160 ret
= i40e_aq_del_udp_tunnel(hw
, i
, NULL
);
7163 dev_dbg(&pf
->pdev
->dev
,
7164 "%s %s port %d, index %d failed, err %s aq_err %s\n",
7165 pf
->udp_ports
[i
].type
? "vxlan" : "geneve",
7166 port
? "add" : "delete",
7168 i40e_stat_str(&pf
->hw
, ret
),
7169 i40e_aq_str(&pf
->hw
,
7170 pf
->hw
.aq
.asq_last_status
));
7171 pf
->udp_ports
[i
].index
= 0;
7178 * i40e_service_task - Run the driver's async subtasks
7179 * @work: pointer to work_struct containing our data
7181 static void i40e_service_task(struct work_struct
*work
)
7183 struct i40e_pf
*pf
= container_of(work
,
7186 unsigned long start_time
= jiffies
;
7188 /* don't bother with service tasks if a reset is in progress */
7189 if (test_bit(__I40E_RESET_RECOVERY_PENDING
, &pf
->state
)) {
7190 i40e_service_event_complete(pf
);
7194 i40e_detect_recover_hung(pf
);
7195 i40e_sync_filters_subtask(pf
);
7196 i40e_reset_subtask(pf
);
7197 i40e_handle_mdd_event(pf
);
7198 i40e_vc_process_vflr_event(pf
);
7199 i40e_watchdog_subtask(pf
);
7200 i40e_fdir_reinit_subtask(pf
);
7201 i40e_client_subtask(pf
);
7202 i40e_sync_filters_subtask(pf
);
7203 i40e_sync_udp_filters_subtask(pf
);
7204 i40e_clean_adminq_subtask(pf
);
7206 i40e_service_event_complete(pf
);
7208 /* If the tasks have taken longer than one timer cycle or there
7209 * is more work to be done, reschedule the service task now
7210 * rather than wait for the timer to tick again.
7212 if (time_after(jiffies
, (start_time
+ pf
->service_timer_period
)) ||
7213 test_bit(__I40E_ADMINQ_EVENT_PENDING
, &pf
->state
) ||
7214 test_bit(__I40E_MDD_EVENT_PENDING
, &pf
->state
) ||
7215 test_bit(__I40E_VFLR_EVENT_PENDING
, &pf
->state
))
7216 i40e_service_event_schedule(pf
);
7220 * i40e_service_timer - timer callback
7221 * @data: pointer to PF struct
7223 static void i40e_service_timer(unsigned long data
)
7225 struct i40e_pf
*pf
= (struct i40e_pf
*)data
;
7227 mod_timer(&pf
->service_timer
,
7228 round_jiffies(jiffies
+ pf
->service_timer_period
));
7229 i40e_service_event_schedule(pf
);
7233 * i40e_set_num_rings_in_vsi - Determine number of rings in the VSI
7234 * @vsi: the VSI being configured
7236 static int i40e_set_num_rings_in_vsi(struct i40e_vsi
*vsi
)
7238 struct i40e_pf
*pf
= vsi
->back
;
7240 switch (vsi
->type
) {
7242 vsi
->alloc_queue_pairs
= pf
->num_lan_qps
;
7243 vsi
->num_desc
= ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS
,
7244 I40E_REQ_DESCRIPTOR_MULTIPLE
);
7245 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
)
7246 vsi
->num_q_vectors
= pf
->num_lan_msix
;
7248 vsi
->num_q_vectors
= 1;
7253 vsi
->alloc_queue_pairs
= 1;
7254 vsi
->num_desc
= ALIGN(I40E_FDIR_RING_COUNT
,
7255 I40E_REQ_DESCRIPTOR_MULTIPLE
);
7256 vsi
->num_q_vectors
= pf
->num_fdsb_msix
;
7259 case I40E_VSI_VMDQ2
:
7260 vsi
->alloc_queue_pairs
= pf
->num_vmdq_qps
;
7261 vsi
->num_desc
= ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS
,
7262 I40E_REQ_DESCRIPTOR_MULTIPLE
);
7263 vsi
->num_q_vectors
= pf
->num_vmdq_msix
;
7266 case I40E_VSI_SRIOV
:
7267 vsi
->alloc_queue_pairs
= pf
->num_vf_qps
;
7268 vsi
->num_desc
= ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS
,
7269 I40E_REQ_DESCRIPTOR_MULTIPLE
);
7274 vsi
->alloc_queue_pairs
= pf
->num_fcoe_qps
;
7275 vsi
->num_desc
= ALIGN(I40E_DEFAULT_NUM_DESCRIPTORS
,
7276 I40E_REQ_DESCRIPTOR_MULTIPLE
);
7277 vsi
->num_q_vectors
= pf
->num_fcoe_msix
;
7280 #endif /* I40E_FCOE */
7290 * i40e_vsi_alloc_arrays - Allocate queue and vector pointer arrays for the vsi
7291 * @type: VSI pointer
7292 * @alloc_qvectors: a bool to specify if q_vectors need to be allocated.
7294 * On error: returns error code (negative)
7295 * On success: returns 0
7297 static int i40e_vsi_alloc_arrays(struct i40e_vsi
*vsi
, bool alloc_qvectors
)
7302 /* allocate memory for both Tx and Rx ring pointers */
7303 size
= sizeof(struct i40e_ring
*) * vsi
->alloc_queue_pairs
* 2;
7304 vsi
->tx_rings
= kzalloc(size
, GFP_KERNEL
);
7307 vsi
->rx_rings
= &vsi
->tx_rings
[vsi
->alloc_queue_pairs
];
7309 if (alloc_qvectors
) {
7310 /* allocate memory for q_vector pointers */
7311 size
= sizeof(struct i40e_q_vector
*) * vsi
->num_q_vectors
;
7312 vsi
->q_vectors
= kzalloc(size
, GFP_KERNEL
);
7313 if (!vsi
->q_vectors
) {
7321 kfree(vsi
->tx_rings
);
7326 * i40e_vsi_mem_alloc - Allocates the next available struct vsi in the PF
7327 * @pf: board private structure
7328 * @type: type of VSI
7330 * On error: returns error code (negative)
7331 * On success: returns vsi index in PF (positive)
7333 static int i40e_vsi_mem_alloc(struct i40e_pf
*pf
, enum i40e_vsi_type type
)
7336 struct i40e_vsi
*vsi
;
7340 /* Need to protect the allocation of the VSIs at the PF level */
7341 mutex_lock(&pf
->switch_mutex
);
7343 /* VSI list may be fragmented if VSI creation/destruction has
7344 * been happening. We can afford to do a quick scan to look
7345 * for any free VSIs in the list.
7347 * find next empty vsi slot, looping back around if necessary
7350 while (i
< pf
->num_alloc_vsi
&& pf
->vsi
[i
])
7352 if (i
>= pf
->num_alloc_vsi
) {
7354 while (i
< pf
->next_vsi
&& pf
->vsi
[i
])
7358 if (i
< pf
->num_alloc_vsi
&& !pf
->vsi
[i
]) {
7359 vsi_idx
= i
; /* Found one! */
7362 goto unlock_pf
; /* out of VSI slots! */
7366 vsi
= kzalloc(sizeof(*vsi
), GFP_KERNEL
);
7373 set_bit(__I40E_DOWN
, &vsi
->state
);
7376 vsi
->int_rate_limit
= 0;
7377 vsi
->rss_table_size
= (vsi
->type
== I40E_VSI_MAIN
) ?
7378 pf
->rss_table_size
: 64;
7379 vsi
->netdev_registered
= false;
7380 vsi
->work_limit
= I40E_DEFAULT_IRQ_WORK
;
7381 INIT_LIST_HEAD(&vsi
->mac_filter_list
);
7382 vsi
->irqs_ready
= false;
7384 ret
= i40e_set_num_rings_in_vsi(vsi
);
7388 ret
= i40e_vsi_alloc_arrays(vsi
, true);
7392 /* Setup default MSIX irq handler for VSI */
7393 i40e_vsi_setup_irqhandler(vsi
, i40e_msix_clean_rings
);
7395 /* Initialize VSI lock */
7396 spin_lock_init(&vsi
->mac_filter_list_lock
);
7397 pf
->vsi
[vsi_idx
] = vsi
;
7402 pf
->next_vsi
= i
- 1;
7405 mutex_unlock(&pf
->switch_mutex
);
7410 * i40e_vsi_free_arrays - Free queue and vector pointer arrays for the VSI
7411 * @type: VSI pointer
7412 * @free_qvectors: a bool to specify if q_vectors need to be freed.
7414 * On error: returns error code (negative)
7415 * On success: returns 0
7417 static void i40e_vsi_free_arrays(struct i40e_vsi
*vsi
, bool free_qvectors
)
7419 /* free the ring and vector containers */
7420 if (free_qvectors
) {
7421 kfree(vsi
->q_vectors
);
7422 vsi
->q_vectors
= NULL
;
7424 kfree(vsi
->tx_rings
);
7425 vsi
->tx_rings
= NULL
;
7426 vsi
->rx_rings
= NULL
;
7430 * i40e_clear_rss_config_user - clear the user configured RSS hash keys
7432 * @vsi: Pointer to VSI structure
7434 static void i40e_clear_rss_config_user(struct i40e_vsi
*vsi
)
7439 kfree(vsi
->rss_hkey_user
);
7440 vsi
->rss_hkey_user
= NULL
;
7442 kfree(vsi
->rss_lut_user
);
7443 vsi
->rss_lut_user
= NULL
;
7447 * i40e_vsi_clear - Deallocate the VSI provided
7448 * @vsi: the VSI being un-configured
7450 static int i40e_vsi_clear(struct i40e_vsi
*vsi
)
7461 mutex_lock(&pf
->switch_mutex
);
7462 if (!pf
->vsi
[vsi
->idx
]) {
7463 dev_err(&pf
->pdev
->dev
, "pf->vsi[%d] is NULL, just free vsi[%d](%p,type %d)\n",
7464 vsi
->idx
, vsi
->idx
, vsi
, vsi
->type
);
7468 if (pf
->vsi
[vsi
->idx
] != vsi
) {
7469 dev_err(&pf
->pdev
->dev
,
7470 "pf->vsi[%d](%p, type %d) != vsi[%d](%p,type %d): no free!\n",
7471 pf
->vsi
[vsi
->idx
]->idx
,
7473 pf
->vsi
[vsi
->idx
]->type
,
7474 vsi
->idx
, vsi
, vsi
->type
);
7478 /* updates the PF for this cleared vsi */
7479 i40e_put_lump(pf
->qp_pile
, vsi
->base_queue
, vsi
->idx
);
7480 i40e_put_lump(pf
->irq_pile
, vsi
->base_vector
, vsi
->idx
);
7482 i40e_vsi_free_arrays(vsi
, true);
7483 i40e_clear_rss_config_user(vsi
);
7485 pf
->vsi
[vsi
->idx
] = NULL
;
7486 if (vsi
->idx
< pf
->next_vsi
)
7487 pf
->next_vsi
= vsi
->idx
;
7490 mutex_unlock(&pf
->switch_mutex
);
7498 * i40e_vsi_clear_rings - Deallocates the Rx and Tx rings for the provided VSI
7499 * @vsi: the VSI being cleaned
7501 static void i40e_vsi_clear_rings(struct i40e_vsi
*vsi
)
7505 if (vsi
->tx_rings
&& vsi
->tx_rings
[0]) {
7506 for (i
= 0; i
< vsi
->alloc_queue_pairs
; i
++) {
7507 kfree_rcu(vsi
->tx_rings
[i
], rcu
);
7508 vsi
->tx_rings
[i
] = NULL
;
7509 vsi
->rx_rings
[i
] = NULL
;
7515 * i40e_alloc_rings - Allocates the Rx and Tx rings for the provided VSI
7516 * @vsi: the VSI being configured
7518 static int i40e_alloc_rings(struct i40e_vsi
*vsi
)
7520 struct i40e_ring
*tx_ring
, *rx_ring
;
7521 struct i40e_pf
*pf
= vsi
->back
;
7524 /* Set basic values in the rings to be used later during open() */
7525 for (i
= 0; i
< vsi
->alloc_queue_pairs
; i
++) {
7526 /* allocate space for both Tx and Rx in one shot */
7527 tx_ring
= kzalloc(sizeof(struct i40e_ring
) * 2, GFP_KERNEL
);
7531 tx_ring
->queue_index
= i
;
7532 tx_ring
->reg_idx
= vsi
->base_queue
+ i
;
7533 tx_ring
->ring_active
= false;
7535 tx_ring
->netdev
= vsi
->netdev
;
7536 tx_ring
->dev
= &pf
->pdev
->dev
;
7537 tx_ring
->count
= vsi
->num_desc
;
7539 tx_ring
->dcb_tc
= 0;
7540 if (vsi
->back
->flags
& I40E_FLAG_WB_ON_ITR_CAPABLE
)
7541 tx_ring
->flags
= I40E_TXR_FLAGS_WB_ON_ITR
;
7542 tx_ring
->tx_itr_setting
= pf
->tx_itr_default
;
7543 vsi
->tx_rings
[i
] = tx_ring
;
7545 rx_ring
= &tx_ring
[1];
7546 rx_ring
->queue_index
= i
;
7547 rx_ring
->reg_idx
= vsi
->base_queue
+ i
;
7548 rx_ring
->ring_active
= false;
7550 rx_ring
->netdev
= vsi
->netdev
;
7551 rx_ring
->dev
= &pf
->pdev
->dev
;
7552 rx_ring
->count
= vsi
->num_desc
;
7554 rx_ring
->dcb_tc
= 0;
7555 rx_ring
->rx_itr_setting
= pf
->rx_itr_default
;
7556 vsi
->rx_rings
[i
] = rx_ring
;
7562 i40e_vsi_clear_rings(vsi
);
7567 * i40e_reserve_msix_vectors - Reserve MSI-X vectors in the kernel
7568 * @pf: board private structure
7569 * @vectors: the number of MSI-X vectors to request
7571 * Returns the number of vectors reserved, or error
7573 static int i40e_reserve_msix_vectors(struct i40e_pf
*pf
, int vectors
)
7575 vectors
= pci_enable_msix_range(pf
->pdev
, pf
->msix_entries
,
7576 I40E_MIN_MSIX
, vectors
);
7578 dev_info(&pf
->pdev
->dev
,
7579 "MSI-X vector reservation failed: %d\n", vectors
);
7587 * i40e_init_msix - Setup the MSIX capability
7588 * @pf: board private structure
7590 * Work with the OS to set up the MSIX vectors needed.
7592 * Returns the number of vectors reserved or negative on failure
7594 static int i40e_init_msix(struct i40e_pf
*pf
)
7596 struct i40e_hw
*hw
= &pf
->hw
;
7600 int iwarp_requested
= 0;
7602 if (!(pf
->flags
& I40E_FLAG_MSIX_ENABLED
))
7605 /* The number of vectors we'll request will be comprised of:
7606 * - Add 1 for "other" cause for Admin Queue events, etc.
7607 * - The number of LAN queue pairs
7608 * - Queues being used for RSS.
7609 * We don't need as many as max_rss_size vectors.
7610 * use rss_size instead in the calculation since that
7611 * is governed by number of cpus in the system.
7612 * - assumes symmetric Tx/Rx pairing
7613 * - The number of VMDq pairs
7614 * - The CPU count within the NUMA node if iWARP is enabled
7616 * - The number of FCOE qps.
7618 * Once we count this up, try the request.
7620 * If we can't get what we want, we'll simplify to nearly nothing
7621 * and try again. If that still fails, we punt.
7623 vectors_left
= hw
->func_caps
.num_msix_vectors
;
7626 /* reserve one vector for miscellaneous handler */
7632 /* reserve vectors for the main PF traffic queues */
7633 pf
->num_lan_msix
= min_t(int, num_online_cpus(), vectors_left
);
7634 vectors_left
-= pf
->num_lan_msix
;
7635 v_budget
+= pf
->num_lan_msix
;
7637 /* reserve one vector for sideband flow director */
7638 if (pf
->flags
& I40E_FLAG_FD_SB_ENABLED
) {
7640 pf
->num_fdsb_msix
= 1;
7644 pf
->num_fdsb_msix
= 0;
7645 pf
->flags
&= ~I40E_FLAG_FD_SB_ENABLED
;
7650 /* can we reserve enough for FCoE? */
7651 if (pf
->flags
& I40E_FLAG_FCOE_ENABLED
) {
7653 pf
->num_fcoe_msix
= 0;
7654 else if (vectors_left
>= pf
->num_fcoe_qps
)
7655 pf
->num_fcoe_msix
= pf
->num_fcoe_qps
;
7657 pf
->num_fcoe_msix
= 1;
7658 v_budget
+= pf
->num_fcoe_msix
;
7659 vectors_left
-= pf
->num_fcoe_msix
;
7663 /* can we reserve enough for iWARP? */
7664 if (pf
->flags
& I40E_FLAG_IWARP_ENABLED
) {
7666 pf
->num_iwarp_msix
= 0;
7667 else if (vectors_left
< pf
->num_iwarp_msix
)
7668 pf
->num_iwarp_msix
= 1;
7669 v_budget
+= pf
->num_iwarp_msix
;
7670 vectors_left
-= pf
->num_iwarp_msix
;
7673 /* any vectors left over go for VMDq support */
7674 if (pf
->flags
& I40E_FLAG_VMDQ_ENABLED
) {
7675 int vmdq_vecs_wanted
= pf
->num_vmdq_vsis
* pf
->num_vmdq_qps
;
7676 int vmdq_vecs
= min_t(int, vectors_left
, vmdq_vecs_wanted
);
7678 /* if we're short on vectors for what's desired, we limit
7679 * the queues per vmdq. If this is still more than are
7680 * available, the user will need to change the number of
7681 * queues/vectors used by the PF later with the ethtool
7684 if (vmdq_vecs
< vmdq_vecs_wanted
)
7685 pf
->num_vmdq_qps
= 1;
7686 pf
->num_vmdq_msix
= pf
->num_vmdq_qps
;
7688 v_budget
+= vmdq_vecs
;
7689 vectors_left
-= vmdq_vecs
;
7692 pf
->msix_entries
= kcalloc(v_budget
, sizeof(struct msix_entry
),
7694 if (!pf
->msix_entries
)
7697 for (i
= 0; i
< v_budget
; i
++)
7698 pf
->msix_entries
[i
].entry
= i
;
7699 v_actual
= i40e_reserve_msix_vectors(pf
, v_budget
);
7701 if (v_actual
!= v_budget
) {
7702 /* If we have limited resources, we will start with no vectors
7703 * for the special features and then allocate vectors to some
7704 * of these features based on the policy and at the end disable
7705 * the features that did not get any vectors.
7707 iwarp_requested
= pf
->num_iwarp_msix
;
7708 pf
->num_iwarp_msix
= 0;
7710 pf
->num_fcoe_qps
= 0;
7711 pf
->num_fcoe_msix
= 0;
7713 pf
->num_vmdq_msix
= 0;
7716 if (v_actual
< I40E_MIN_MSIX
) {
7717 pf
->flags
&= ~I40E_FLAG_MSIX_ENABLED
;
7718 kfree(pf
->msix_entries
);
7719 pf
->msix_entries
= NULL
;
7722 } else if (v_actual
== I40E_MIN_MSIX
) {
7723 /* Adjust for minimal MSIX use */
7724 pf
->num_vmdq_vsis
= 0;
7725 pf
->num_vmdq_qps
= 0;
7726 pf
->num_lan_qps
= 1;
7727 pf
->num_lan_msix
= 1;
7729 } else if (v_actual
!= v_budget
) {
7732 /* reserve the misc vector */
7735 /* Scale vector usage down */
7736 pf
->num_vmdq_msix
= 1; /* force VMDqs to only one vector */
7737 pf
->num_vmdq_vsis
= 1;
7738 pf
->num_vmdq_qps
= 1;
7739 pf
->flags
&= ~I40E_FLAG_FD_SB_ENABLED
;
7741 /* partition out the remaining vectors */
7744 pf
->num_lan_msix
= 1;
7747 if (pf
->flags
& I40E_FLAG_IWARP_ENABLED
) {
7748 pf
->num_lan_msix
= 1;
7749 pf
->num_iwarp_msix
= 1;
7751 pf
->num_lan_msix
= 2;
7754 /* give one vector to FCoE */
7755 if (pf
->flags
& I40E_FLAG_FCOE_ENABLED
) {
7756 pf
->num_lan_msix
= 1;
7757 pf
->num_fcoe_msix
= 1;
7762 if (pf
->flags
& I40E_FLAG_IWARP_ENABLED
) {
7763 pf
->num_iwarp_msix
= min_t(int, (vec
/ 3),
7765 pf
->num_vmdq_vsis
= min_t(int, (vec
/ 3),
7766 I40E_DEFAULT_NUM_VMDQ_VSI
);
7768 pf
->num_vmdq_vsis
= min_t(int, (vec
/ 2),
7769 I40E_DEFAULT_NUM_VMDQ_VSI
);
7771 pf
->num_lan_msix
= min_t(int,
7772 (vec
- (pf
->num_iwarp_msix
+ pf
->num_vmdq_vsis
)),
7775 /* give one vector to FCoE */
7776 if (pf
->flags
& I40E_FLAG_FCOE_ENABLED
) {
7777 pf
->num_fcoe_msix
= 1;
7785 if ((pf
->flags
& I40E_FLAG_VMDQ_ENABLED
) &&
7786 (pf
->num_vmdq_msix
== 0)) {
7787 dev_info(&pf
->pdev
->dev
, "VMDq disabled, not enough MSI-X vectors\n");
7788 pf
->flags
&= ~I40E_FLAG_VMDQ_ENABLED
;
7791 if ((pf
->flags
& I40E_FLAG_IWARP_ENABLED
) &&
7792 (pf
->num_iwarp_msix
== 0)) {
7793 dev_info(&pf
->pdev
->dev
, "IWARP disabled, not enough MSI-X vectors\n");
7794 pf
->flags
&= ~I40E_FLAG_IWARP_ENABLED
;
7798 if ((pf
->flags
& I40E_FLAG_FCOE_ENABLED
) && (pf
->num_fcoe_msix
== 0)) {
7799 dev_info(&pf
->pdev
->dev
, "FCOE disabled, not enough MSI-X vectors\n");
7800 pf
->flags
&= ~I40E_FLAG_FCOE_ENABLED
;
7807 * i40e_vsi_alloc_q_vector - Allocate memory for a single interrupt vector
7808 * @vsi: the VSI being configured
7809 * @v_idx: index of the vector in the vsi struct
7810 * @cpu: cpu to be used on affinity_mask
7812 * We allocate one q_vector. If allocation fails we return -ENOMEM.
7814 static int i40e_vsi_alloc_q_vector(struct i40e_vsi
*vsi
, int v_idx
, int cpu
)
7816 struct i40e_q_vector
*q_vector
;
7818 /* allocate q_vector */
7819 q_vector
= kzalloc(sizeof(struct i40e_q_vector
), GFP_KERNEL
);
7823 q_vector
->vsi
= vsi
;
7824 q_vector
->v_idx
= v_idx
;
7825 cpumask_set_cpu(cpu
, &q_vector
->affinity_mask
);
7828 netif_napi_add(vsi
->netdev
, &q_vector
->napi
,
7829 i40e_napi_poll
, NAPI_POLL_WEIGHT
);
7831 q_vector
->rx
.latency_range
= I40E_LOW_LATENCY
;
7832 q_vector
->tx
.latency_range
= I40E_LOW_LATENCY
;
7834 /* tie q_vector and vsi together */
7835 vsi
->q_vectors
[v_idx
] = q_vector
;
7841 * i40e_vsi_alloc_q_vectors - Allocate memory for interrupt vectors
7842 * @vsi: the VSI being configured
7844 * We allocate one q_vector per queue interrupt. If allocation fails we
7847 static int i40e_vsi_alloc_q_vectors(struct i40e_vsi
*vsi
)
7849 struct i40e_pf
*pf
= vsi
->back
;
7850 int err
, v_idx
, num_q_vectors
, current_cpu
;
7852 /* if not MSIX, give the one vector only to the LAN VSI */
7853 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
)
7854 num_q_vectors
= vsi
->num_q_vectors
;
7855 else if (vsi
== pf
->vsi
[pf
->lan_vsi
])
7860 current_cpu
= cpumask_first(cpu_online_mask
);
7862 for (v_idx
= 0; v_idx
< num_q_vectors
; v_idx
++) {
7863 err
= i40e_vsi_alloc_q_vector(vsi
, v_idx
, current_cpu
);
7866 current_cpu
= cpumask_next(current_cpu
, cpu_online_mask
);
7867 if (unlikely(current_cpu
>= nr_cpu_ids
))
7868 current_cpu
= cpumask_first(cpu_online_mask
);
7875 i40e_free_q_vector(vsi
, v_idx
);
7881 * i40e_init_interrupt_scheme - Determine proper interrupt scheme
7882 * @pf: board private structure to initialize
7884 static int i40e_init_interrupt_scheme(struct i40e_pf
*pf
)
7889 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
) {
7890 vectors
= i40e_init_msix(pf
);
7892 pf
->flags
&= ~(I40E_FLAG_MSIX_ENABLED
|
7893 I40E_FLAG_IWARP_ENABLED
|
7895 I40E_FLAG_FCOE_ENABLED
|
7897 I40E_FLAG_RSS_ENABLED
|
7898 I40E_FLAG_DCB_CAPABLE
|
7899 I40E_FLAG_SRIOV_ENABLED
|
7900 I40E_FLAG_FD_SB_ENABLED
|
7901 I40E_FLAG_FD_ATR_ENABLED
|
7902 I40E_FLAG_VMDQ_ENABLED
);
7904 /* rework the queue expectations without MSIX */
7905 i40e_determine_queue_usage(pf
);
7909 if (!(pf
->flags
& I40E_FLAG_MSIX_ENABLED
) &&
7910 (pf
->flags
& I40E_FLAG_MSI_ENABLED
)) {
7911 dev_info(&pf
->pdev
->dev
, "MSI-X not available, trying MSI\n");
7912 vectors
= pci_enable_msi(pf
->pdev
);
7914 dev_info(&pf
->pdev
->dev
, "MSI init failed - %d\n",
7916 pf
->flags
&= ~I40E_FLAG_MSI_ENABLED
;
7918 vectors
= 1; /* one MSI or Legacy vector */
7921 if (!(pf
->flags
& (I40E_FLAG_MSIX_ENABLED
| I40E_FLAG_MSI_ENABLED
)))
7922 dev_info(&pf
->pdev
->dev
, "MSI-X and MSI not available, falling back to Legacy IRQ\n");
7924 /* set up vector assignment tracking */
7925 size
= sizeof(struct i40e_lump_tracking
) + (sizeof(u16
) * vectors
);
7926 pf
->irq_pile
= kzalloc(size
, GFP_KERNEL
);
7927 if (!pf
->irq_pile
) {
7928 dev_err(&pf
->pdev
->dev
, "error allocating irq_pile memory\n");
7931 pf
->irq_pile
->num_entries
= vectors
;
7932 pf
->irq_pile
->search_hint
= 0;
7934 /* track first vector for misc interrupts, ignore return */
7935 (void)i40e_get_lump(pf
, pf
->irq_pile
, 1, I40E_PILE_VALID_BIT
- 1);
7941 * i40e_setup_misc_vector - Setup the misc vector to handle non queue events
7942 * @pf: board private structure
7944 * This sets up the handler for MSIX 0, which is used to manage the
7945 * non-queue interrupts, e.g. AdminQ and errors. This is not used
7946 * when in MSI or Legacy interrupt mode.
7948 static int i40e_setup_misc_vector(struct i40e_pf
*pf
)
7950 struct i40e_hw
*hw
= &pf
->hw
;
7953 /* Only request the irq if this is the first time through, and
7954 * not when we're rebuilding after a Reset
7956 if (!test_bit(__I40E_RESET_RECOVERY_PENDING
, &pf
->state
)) {
7957 err
= request_irq(pf
->msix_entries
[0].vector
,
7958 i40e_intr
, 0, pf
->int_name
, pf
);
7960 dev_info(&pf
->pdev
->dev
,
7961 "request_irq for %s failed: %d\n",
7967 i40e_enable_misc_int_causes(pf
);
7969 /* associate no queues to the misc vector */
7970 wr32(hw
, I40E_PFINT_LNKLST0
, I40E_QUEUE_END_OF_LIST
);
7971 wr32(hw
, I40E_PFINT_ITR0(I40E_RX_ITR
), I40E_ITR_8K
);
7975 i40e_irq_dynamic_enable_icr0(pf
, true);
7981 * i40e_config_rss_aq - Prepare for RSS using AQ commands
7982 * @vsi: vsi structure
7983 * @seed: RSS hash seed
7985 static int i40e_config_rss_aq(struct i40e_vsi
*vsi
, const u8
*seed
,
7986 u8
*lut
, u16 lut_size
)
7988 struct i40e_aqc_get_set_rss_key_data rss_key
;
7989 struct i40e_pf
*pf
= vsi
->back
;
7990 struct i40e_hw
*hw
= &pf
->hw
;
7991 bool pf_lut
= false;
7995 memcpy(&rss_key
, seed
, sizeof(rss_key
));
7997 rss_lut
= kzalloc(pf
->rss_table_size
, GFP_KERNEL
);
8001 /* Populate the LUT with max no. of queues in round robin fashion */
8002 for (i
= 0; i
< vsi
->rss_table_size
; i
++)
8003 rss_lut
[i
] = i
% vsi
->rss_size
;
8005 ret
= i40e_aq_set_rss_key(hw
, vsi
->id
, &rss_key
);
8007 dev_info(&pf
->pdev
->dev
,
8008 "Cannot set RSS key, err %s aq_err %s\n",
8009 i40e_stat_str(&pf
->hw
, ret
),
8010 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
8011 goto config_rss_aq_out
;
8014 if (vsi
->type
== I40E_VSI_MAIN
)
8017 ret
= i40e_aq_set_rss_lut(hw
, vsi
->id
, pf_lut
, rss_lut
,
8018 vsi
->rss_table_size
);
8020 dev_info(&pf
->pdev
->dev
,
8021 "Cannot set RSS lut, err %s aq_err %s\n",
8022 i40e_stat_str(&pf
->hw
, ret
),
8023 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
8031 * i40e_vsi_config_rss - Prepare for VSI(VMDq) RSS if used
8032 * @vsi: VSI structure
8034 static int i40e_vsi_config_rss(struct i40e_vsi
*vsi
)
8036 u8 seed
[I40E_HKEY_ARRAY_SIZE
];
8037 struct i40e_pf
*pf
= vsi
->back
;
8041 if (!(pf
->flags
& I40E_FLAG_RSS_AQ_CAPABLE
))
8044 lut
= kzalloc(vsi
->rss_table_size
, GFP_KERNEL
);
8048 i40e_fill_rss_lut(pf
, lut
, vsi
->rss_table_size
, vsi
->rss_size
);
8049 netdev_rss_key_fill((void *)seed
, I40E_HKEY_ARRAY_SIZE
);
8050 vsi
->rss_size
= min_t(int, pf
->alloc_rss_size
, vsi
->num_queue_pairs
);
8051 ret
= i40e_config_rss_aq(vsi
, seed
, lut
, vsi
->rss_table_size
);
8058 * i40e_get_rss_aq - Get RSS keys and lut by using AQ commands
8059 * @vsi: Pointer to vsi structure
8060 * @seed: Buffter to store the hash keys
8061 * @lut: Buffer to store the lookup table entries
8062 * @lut_size: Size of buffer to store the lookup table entries
8064 * Return 0 on success, negative on failure
8066 static int i40e_get_rss_aq(struct i40e_vsi
*vsi
, const u8
*seed
,
8067 u8
*lut
, u16 lut_size
)
8069 struct i40e_pf
*pf
= vsi
->back
;
8070 struct i40e_hw
*hw
= &pf
->hw
;
8074 ret
= i40e_aq_get_rss_key(hw
, vsi
->id
,
8075 (struct i40e_aqc_get_set_rss_key_data
*)seed
);
8077 dev_info(&pf
->pdev
->dev
,
8078 "Cannot get RSS key, err %s aq_err %s\n",
8079 i40e_stat_str(&pf
->hw
, ret
),
8080 i40e_aq_str(&pf
->hw
,
8081 pf
->hw
.aq
.asq_last_status
));
8087 bool pf_lut
= vsi
->type
== I40E_VSI_MAIN
? true : false;
8089 ret
= i40e_aq_get_rss_lut(hw
, vsi
->id
, pf_lut
, lut
, lut_size
);
8091 dev_info(&pf
->pdev
->dev
,
8092 "Cannot get RSS lut, err %s aq_err %s\n",
8093 i40e_stat_str(&pf
->hw
, ret
),
8094 i40e_aq_str(&pf
->hw
,
8095 pf
->hw
.aq
.asq_last_status
));
8104 * i40e_config_rss_reg - Configure RSS keys and lut by writing registers
8105 * @vsi: Pointer to vsi structure
8106 * @seed: RSS hash seed
8107 * @lut: Lookup table
8108 * @lut_size: Lookup table size
8110 * Returns 0 on success, negative on failure
8112 static int i40e_config_rss_reg(struct i40e_vsi
*vsi
, const u8
*seed
,
8113 const u8
*lut
, u16 lut_size
)
8115 struct i40e_pf
*pf
= vsi
->back
;
8116 struct i40e_hw
*hw
= &pf
->hw
;
8117 u16 vf_id
= vsi
->vf_id
;
8120 /* Fill out hash function seed */
8122 u32
*seed_dw
= (u32
*)seed
;
8124 if (vsi
->type
== I40E_VSI_MAIN
) {
8125 for (i
= 0; i
<= I40E_PFQF_HKEY_MAX_INDEX
; i
++)
8126 i40e_write_rx_ctl(hw
, I40E_PFQF_HKEY(i
),
8128 } else if (vsi
->type
== I40E_VSI_SRIOV
) {
8129 for (i
= 0; i
<= I40E_VFQF_HKEY1_MAX_INDEX
; i
++)
8130 i40e_write_rx_ctl(hw
,
8131 I40E_VFQF_HKEY1(i
, vf_id
),
8134 dev_err(&pf
->pdev
->dev
, "Cannot set RSS seed - invalid VSI type\n");
8139 u32
*lut_dw
= (u32
*)lut
;
8141 if (vsi
->type
== I40E_VSI_MAIN
) {
8142 if (lut_size
!= I40E_HLUT_ARRAY_SIZE
)
8144 for (i
= 0; i
<= I40E_PFQF_HLUT_MAX_INDEX
; i
++)
8145 wr32(hw
, I40E_PFQF_HLUT(i
), lut_dw
[i
]);
8146 } else if (vsi
->type
== I40E_VSI_SRIOV
) {
8147 if (lut_size
!= I40E_VF_HLUT_ARRAY_SIZE
)
8149 for (i
= 0; i
<= I40E_VFQF_HLUT_MAX_INDEX
; i
++)
8150 i40e_write_rx_ctl(hw
,
8151 I40E_VFQF_HLUT1(i
, vf_id
),
8154 dev_err(&pf
->pdev
->dev
, "Cannot set RSS LUT - invalid VSI type\n");
8163 * i40e_get_rss_reg - Get the RSS keys and lut by reading registers
8164 * @vsi: Pointer to VSI structure
8165 * @seed: Buffer to store the keys
8166 * @lut: Buffer to store the lookup table entries
8167 * @lut_size: Size of buffer to store the lookup table entries
8169 * Returns 0 on success, negative on failure
8171 static int i40e_get_rss_reg(struct i40e_vsi
*vsi
, u8
*seed
,
8172 u8
*lut
, u16 lut_size
)
8174 struct i40e_pf
*pf
= vsi
->back
;
8175 struct i40e_hw
*hw
= &pf
->hw
;
8179 u32
*seed_dw
= (u32
*)seed
;
8181 for (i
= 0; i
<= I40E_PFQF_HKEY_MAX_INDEX
; i
++)
8182 seed_dw
[i
] = i40e_read_rx_ctl(hw
, I40E_PFQF_HKEY(i
));
8185 u32
*lut_dw
= (u32
*)lut
;
8187 if (lut_size
!= I40E_HLUT_ARRAY_SIZE
)
8189 for (i
= 0; i
<= I40E_PFQF_HLUT_MAX_INDEX
; i
++)
8190 lut_dw
[i
] = rd32(hw
, I40E_PFQF_HLUT(i
));
8197 * i40e_config_rss - Configure RSS keys and lut
8198 * @vsi: Pointer to VSI structure
8199 * @seed: RSS hash seed
8200 * @lut: Lookup table
8201 * @lut_size: Lookup table size
8203 * Returns 0 on success, negative on failure
8205 int i40e_config_rss(struct i40e_vsi
*vsi
, u8
*seed
, u8
*lut
, u16 lut_size
)
8207 struct i40e_pf
*pf
= vsi
->back
;
8209 if (pf
->flags
& I40E_FLAG_RSS_AQ_CAPABLE
)
8210 return i40e_config_rss_aq(vsi
, seed
, lut
, lut_size
);
8212 return i40e_config_rss_reg(vsi
, seed
, lut
, lut_size
);
8216 * i40e_get_rss - Get RSS keys and lut
8217 * @vsi: Pointer to VSI structure
8218 * @seed: Buffer to store the keys
8219 * @lut: Buffer to store the lookup table entries
8220 * lut_size: Size of buffer to store the lookup table entries
8222 * Returns 0 on success, negative on failure
8224 int i40e_get_rss(struct i40e_vsi
*vsi
, u8
*seed
, u8
*lut
, u16 lut_size
)
8226 struct i40e_pf
*pf
= vsi
->back
;
8228 if (pf
->flags
& I40E_FLAG_RSS_AQ_CAPABLE
)
8229 return i40e_get_rss_aq(vsi
, seed
, lut
, lut_size
);
8231 return i40e_get_rss_reg(vsi
, seed
, lut
, lut_size
);
8235 * i40e_fill_rss_lut - Fill the RSS lookup table with default values
8236 * @pf: Pointer to board private structure
8237 * @lut: Lookup table
8238 * @rss_table_size: Lookup table size
8239 * @rss_size: Range of queue number for hashing
8241 static void i40e_fill_rss_lut(struct i40e_pf
*pf
, u8
*lut
,
8242 u16 rss_table_size
, u16 rss_size
)
8246 for (i
= 0; i
< rss_table_size
; i
++)
8247 lut
[i
] = i
% rss_size
;
8251 * i40e_pf_config_rss - Prepare for RSS if used
8252 * @pf: board private structure
8254 static int i40e_pf_config_rss(struct i40e_pf
*pf
)
8256 struct i40e_vsi
*vsi
= pf
->vsi
[pf
->lan_vsi
];
8257 u8 seed
[I40E_HKEY_ARRAY_SIZE
];
8259 struct i40e_hw
*hw
= &pf
->hw
;
8264 /* By default we enable TCP/UDP with IPv4/IPv6 ptypes */
8265 hena
= (u64
)i40e_read_rx_ctl(hw
, I40E_PFQF_HENA(0)) |
8266 ((u64
)i40e_read_rx_ctl(hw
, I40E_PFQF_HENA(1)) << 32);
8267 hena
|= i40e_pf_get_default_rss_hena(pf
);
8269 i40e_write_rx_ctl(hw
, I40E_PFQF_HENA(0), (u32
)hena
);
8270 i40e_write_rx_ctl(hw
, I40E_PFQF_HENA(1), (u32
)(hena
>> 32));
8272 /* Determine the RSS table size based on the hardware capabilities */
8273 reg_val
= i40e_read_rx_ctl(hw
, I40E_PFQF_CTL_0
);
8274 reg_val
= (pf
->rss_table_size
== 512) ?
8275 (reg_val
| I40E_PFQF_CTL_0_HASHLUTSIZE_512
) :
8276 (reg_val
& ~I40E_PFQF_CTL_0_HASHLUTSIZE_512
);
8277 i40e_write_rx_ctl(hw
, I40E_PFQF_CTL_0
, reg_val
);
8279 /* Determine the RSS size of the VSI */
8281 vsi
->rss_size
= min_t(int, pf
->alloc_rss_size
,
8282 vsi
->num_queue_pairs
);
8284 lut
= kzalloc(vsi
->rss_table_size
, GFP_KERNEL
);
8288 /* Use user configured lut if there is one, otherwise use default */
8289 if (vsi
->rss_lut_user
)
8290 memcpy(lut
, vsi
->rss_lut_user
, vsi
->rss_table_size
);
8292 i40e_fill_rss_lut(pf
, lut
, vsi
->rss_table_size
, vsi
->rss_size
);
8294 /* Use user configured hash key if there is one, otherwise
8297 if (vsi
->rss_hkey_user
)
8298 memcpy(seed
, vsi
->rss_hkey_user
, I40E_HKEY_ARRAY_SIZE
);
8300 netdev_rss_key_fill((void *)seed
, I40E_HKEY_ARRAY_SIZE
);
8301 ret
= i40e_config_rss(vsi
, seed
, lut
, vsi
->rss_table_size
);
8308 * i40e_reconfig_rss_queues - change number of queues for rss and rebuild
8309 * @pf: board private structure
8310 * @queue_count: the requested queue count for rss.
8312 * returns 0 if rss is not enabled, if enabled returns the final rss queue
8313 * count which may be different from the requested queue count.
8315 int i40e_reconfig_rss_queues(struct i40e_pf
*pf
, int queue_count
)
8317 struct i40e_vsi
*vsi
= pf
->vsi
[pf
->lan_vsi
];
8320 if (!(pf
->flags
& I40E_FLAG_RSS_ENABLED
))
8323 new_rss_size
= min_t(int, queue_count
, pf
->rss_size_max
);
8325 if (queue_count
!= vsi
->num_queue_pairs
) {
8326 vsi
->req_queue_pairs
= queue_count
;
8327 i40e_prep_for_reset(pf
);
8329 pf
->alloc_rss_size
= new_rss_size
;
8331 i40e_reset_and_rebuild(pf
, true);
8333 /* Discard the user configured hash keys and lut, if less
8334 * queues are enabled.
8336 if (queue_count
< vsi
->rss_size
) {
8337 i40e_clear_rss_config_user(vsi
);
8338 dev_dbg(&pf
->pdev
->dev
,
8339 "discard user configured hash keys and lut\n");
8342 /* Reset vsi->rss_size, as number of enabled queues changed */
8343 vsi
->rss_size
= min_t(int, pf
->alloc_rss_size
,
8344 vsi
->num_queue_pairs
);
8346 i40e_pf_config_rss(pf
);
8348 dev_info(&pf
->pdev
->dev
, "RSS count/HW max RSS count: %d/%d\n",
8349 pf
->alloc_rss_size
, pf
->rss_size_max
);
8350 return pf
->alloc_rss_size
;
8354 * i40e_get_npar_bw_setting - Retrieve BW settings for this PF partition
8355 * @pf: board private structure
8357 i40e_status
i40e_get_npar_bw_setting(struct i40e_pf
*pf
)
8360 bool min_valid
, max_valid
;
8363 status
= i40e_read_bw_from_alt_ram(&pf
->hw
, &max_bw
, &min_bw
,
8364 &min_valid
, &max_valid
);
8368 pf
->npar_min_bw
= min_bw
;
8370 pf
->npar_max_bw
= max_bw
;
8377 * i40e_set_npar_bw_setting - Set BW settings for this PF partition
8378 * @pf: board private structure
8380 i40e_status
i40e_set_npar_bw_setting(struct i40e_pf
*pf
)
8382 struct i40e_aqc_configure_partition_bw_data bw_data
;
8385 /* Set the valid bit for this PF */
8386 bw_data
.pf_valid_bits
= cpu_to_le16(BIT(pf
->hw
.pf_id
));
8387 bw_data
.max_bw
[pf
->hw
.pf_id
] = pf
->npar_max_bw
& I40E_ALT_BW_VALUE_MASK
;
8388 bw_data
.min_bw
[pf
->hw
.pf_id
] = pf
->npar_min_bw
& I40E_ALT_BW_VALUE_MASK
;
8390 /* Set the new bandwidths */
8391 status
= i40e_aq_configure_partition_bw(&pf
->hw
, &bw_data
, NULL
);
8397 * i40e_commit_npar_bw_setting - Commit BW settings for this PF partition
8398 * @pf: board private structure
8400 i40e_status
i40e_commit_npar_bw_setting(struct i40e_pf
*pf
)
8402 /* Commit temporary BW setting to permanent NVM image */
8403 enum i40e_admin_queue_err last_aq_status
;
8407 if (pf
->hw
.partition_id
!= 1) {
8408 dev_info(&pf
->pdev
->dev
,
8409 "Commit BW only works on partition 1! This is partition %d",
8410 pf
->hw
.partition_id
);
8411 ret
= I40E_NOT_SUPPORTED
;
8415 /* Acquire NVM for read access */
8416 ret
= i40e_acquire_nvm(&pf
->hw
, I40E_RESOURCE_READ
);
8417 last_aq_status
= pf
->hw
.aq
.asq_last_status
;
8419 dev_info(&pf
->pdev
->dev
,
8420 "Cannot acquire NVM for read access, err %s aq_err %s\n",
8421 i40e_stat_str(&pf
->hw
, ret
),
8422 i40e_aq_str(&pf
->hw
, last_aq_status
));
8426 /* Read word 0x10 of NVM - SW compatibility word 1 */
8427 ret
= i40e_aq_read_nvm(&pf
->hw
,
8428 I40E_SR_NVM_CONTROL_WORD
,
8429 0x10, sizeof(nvm_word
), &nvm_word
,
8431 /* Save off last admin queue command status before releasing
8434 last_aq_status
= pf
->hw
.aq
.asq_last_status
;
8435 i40e_release_nvm(&pf
->hw
);
8437 dev_info(&pf
->pdev
->dev
, "NVM read error, err %s aq_err %s\n",
8438 i40e_stat_str(&pf
->hw
, ret
),
8439 i40e_aq_str(&pf
->hw
, last_aq_status
));
8443 /* Wait a bit for NVM release to complete */
8446 /* Acquire NVM for write access */
8447 ret
= i40e_acquire_nvm(&pf
->hw
, I40E_RESOURCE_WRITE
);
8448 last_aq_status
= pf
->hw
.aq
.asq_last_status
;
8450 dev_info(&pf
->pdev
->dev
,
8451 "Cannot acquire NVM for write access, err %s aq_err %s\n",
8452 i40e_stat_str(&pf
->hw
, ret
),
8453 i40e_aq_str(&pf
->hw
, last_aq_status
));
8456 /* Write it back out unchanged to initiate update NVM,
8457 * which will force a write of the shadow (alt) RAM to
8458 * the NVM - thus storing the bandwidth values permanently.
8460 ret
= i40e_aq_update_nvm(&pf
->hw
,
8461 I40E_SR_NVM_CONTROL_WORD
,
8462 0x10, sizeof(nvm_word
),
8463 &nvm_word
, true, NULL
);
8464 /* Save off last admin queue command status before releasing
8467 last_aq_status
= pf
->hw
.aq
.asq_last_status
;
8468 i40e_release_nvm(&pf
->hw
);
8470 dev_info(&pf
->pdev
->dev
,
8471 "BW settings NOT SAVED, err %s aq_err %s\n",
8472 i40e_stat_str(&pf
->hw
, ret
),
8473 i40e_aq_str(&pf
->hw
, last_aq_status
));
8480 * i40e_sw_init - Initialize general software structures (struct i40e_pf)
8481 * @pf: board private structure to initialize
8483 * i40e_sw_init initializes the Adapter private data structure.
8484 * Fields are initialized based on PCI device information and
8485 * OS network device settings (MTU size).
8487 static int i40e_sw_init(struct i40e_pf
*pf
)
8492 pf
->msg_enable
= netif_msg_init(I40E_DEFAULT_MSG_ENABLE
,
8493 (NETIF_MSG_DRV
|NETIF_MSG_PROBE
|NETIF_MSG_LINK
));
8494 if (debug
!= -1 && debug
!= I40E_DEFAULT_MSG_ENABLE
) {
8495 if (I40E_DEBUG_USER
& debug
)
8496 pf
->hw
.debug_mask
= debug
;
8497 pf
->msg_enable
= netif_msg_init((debug
& ~I40E_DEBUG_USER
),
8498 I40E_DEFAULT_MSG_ENABLE
);
8501 /* Set default capability flags */
8502 pf
->flags
= I40E_FLAG_RX_CSUM_ENABLED
|
8503 I40E_FLAG_MSI_ENABLED
|
8504 I40E_FLAG_MSIX_ENABLED
;
8506 /* Set default ITR */
8507 pf
->rx_itr_default
= I40E_ITR_DYNAMIC
| I40E_ITR_RX_DEF
;
8508 pf
->tx_itr_default
= I40E_ITR_DYNAMIC
| I40E_ITR_TX_DEF
;
8510 /* Depending on PF configurations, it is possible that the RSS
8511 * maximum might end up larger than the available queues
8513 pf
->rss_size_max
= BIT(pf
->hw
.func_caps
.rss_table_entry_width
);
8514 pf
->alloc_rss_size
= 1;
8515 pf
->rss_table_size
= pf
->hw
.func_caps
.rss_table_size
;
8516 pf
->rss_size_max
= min_t(int, pf
->rss_size_max
,
8517 pf
->hw
.func_caps
.num_tx_qp
);
8518 if (pf
->hw
.func_caps
.rss
) {
8519 pf
->flags
|= I40E_FLAG_RSS_ENABLED
;
8520 pf
->alloc_rss_size
= min_t(int, pf
->rss_size_max
,
8524 /* MFP mode enabled */
8525 if (pf
->hw
.func_caps
.npar_enable
|| pf
->hw
.func_caps
.flex10_enable
) {
8526 pf
->flags
|= I40E_FLAG_MFP_ENABLED
;
8527 dev_info(&pf
->pdev
->dev
, "MFP mode Enabled\n");
8528 if (i40e_get_npar_bw_setting(pf
))
8529 dev_warn(&pf
->pdev
->dev
,
8530 "Could not get NPAR bw settings\n");
8532 dev_info(&pf
->pdev
->dev
,
8533 "Min BW = %8.8x, Max BW = %8.8x\n",
8534 pf
->npar_min_bw
, pf
->npar_max_bw
);
8537 /* FW/NVM is not yet fixed in this regard */
8538 if ((pf
->hw
.func_caps
.fd_filters_guaranteed
> 0) ||
8539 (pf
->hw
.func_caps
.fd_filters_best_effort
> 0)) {
8540 pf
->flags
|= I40E_FLAG_FD_ATR_ENABLED
;
8541 pf
->atr_sample_rate
= I40E_DEFAULT_ATR_SAMPLE_RATE
;
8542 if (pf
->flags
& I40E_FLAG_MFP_ENABLED
&&
8543 pf
->hw
.num_partitions
> 1)
8544 dev_info(&pf
->pdev
->dev
,
8545 "Flow Director Sideband mode Disabled in MFP mode\n");
8547 pf
->flags
|= I40E_FLAG_FD_SB_ENABLED
;
8548 pf
->fdir_pf_filter_count
=
8549 pf
->hw
.func_caps
.fd_filters_guaranteed
;
8550 pf
->hw
.fdir_shared_filter_count
=
8551 pf
->hw
.func_caps
.fd_filters_best_effort
;
8554 if (i40e_is_mac_710(&pf
->hw
) &&
8555 (((pf
->hw
.aq
.fw_maj_ver
== 4) && (pf
->hw
.aq
.fw_min_ver
< 33)) ||
8556 (pf
->hw
.aq
.fw_maj_ver
< 4))) {
8557 pf
->flags
|= I40E_FLAG_RESTART_AUTONEG
;
8558 /* No DCB support for FW < v4.33 */
8559 pf
->flags
|= I40E_FLAG_NO_DCB_SUPPORT
;
8562 /* Disable FW LLDP if FW < v4.3 */
8563 if (i40e_is_mac_710(&pf
->hw
) &&
8564 (((pf
->hw
.aq
.fw_maj_ver
== 4) && (pf
->hw
.aq
.fw_min_ver
< 3)) ||
8565 (pf
->hw
.aq
.fw_maj_ver
< 4)))
8566 pf
->flags
|= I40E_FLAG_STOP_FW_LLDP
;
8568 /* Use the FW Set LLDP MIB API if FW > v4.40 */
8569 if (i40e_is_mac_710(&pf
->hw
) &&
8570 (((pf
->hw
.aq
.fw_maj_ver
== 4) && (pf
->hw
.aq
.fw_min_ver
>= 40)) ||
8571 (pf
->hw
.aq
.fw_maj_ver
>= 5)))
8572 pf
->flags
|= I40E_FLAG_USE_SET_LLDP_MIB
;
8574 if (pf
->hw
.func_caps
.vmdq
) {
8575 pf
->num_vmdq_vsis
= I40E_DEFAULT_NUM_VMDQ_VSI
;
8576 pf
->flags
|= I40E_FLAG_VMDQ_ENABLED
;
8577 pf
->num_vmdq_qps
= i40e_default_queues_per_vmdq(pf
);
8580 if (pf
->hw
.func_caps
.iwarp
) {
8581 pf
->flags
|= I40E_FLAG_IWARP_ENABLED
;
8582 /* IWARP needs one extra vector for CQP just like MISC.*/
8583 pf
->num_iwarp_msix
= (int)num_online_cpus() + 1;
8587 i40e_init_pf_fcoe(pf
);
8589 #endif /* I40E_FCOE */
8590 #ifdef CONFIG_PCI_IOV
8591 if (pf
->hw
.func_caps
.num_vfs
&& pf
->hw
.partition_id
== 1) {
8592 pf
->num_vf_qps
= I40E_DEFAULT_QUEUES_PER_VF
;
8593 pf
->flags
|= I40E_FLAG_SRIOV_ENABLED
;
8594 pf
->num_req_vfs
= min_t(int,
8595 pf
->hw
.func_caps
.num_vfs
,
8598 #endif /* CONFIG_PCI_IOV */
8599 if (pf
->hw
.mac
.type
== I40E_MAC_X722
) {
8600 pf
->flags
|= I40E_FLAG_RSS_AQ_CAPABLE
|
8601 I40E_FLAG_128_QP_RSS_CAPABLE
|
8602 I40E_FLAG_HW_ATR_EVICT_CAPABLE
|
8603 I40E_FLAG_OUTER_UDP_CSUM_CAPABLE
|
8604 I40E_FLAG_WB_ON_ITR_CAPABLE
|
8605 I40E_FLAG_MULTIPLE_TCP_UDP_RSS_PCTYPE
|
8606 I40E_FLAG_NO_PCI_LINK_CHECK
|
8607 I40E_FLAG_100M_SGMII_CAPABLE
|
8608 I40E_FLAG_USE_SET_LLDP_MIB
|
8609 I40E_FLAG_GENEVE_OFFLOAD_CAPABLE
;
8610 } else if ((pf
->hw
.aq
.api_maj_ver
> 1) ||
8611 ((pf
->hw
.aq
.api_maj_ver
== 1) &&
8612 (pf
->hw
.aq
.api_min_ver
> 4))) {
8613 /* Supported in FW API version higher than 1.4 */
8614 pf
->flags
|= I40E_FLAG_GENEVE_OFFLOAD_CAPABLE
;
8615 pf
->auto_disable_flags
= I40E_FLAG_HW_ATR_EVICT_CAPABLE
;
8617 pf
->auto_disable_flags
= I40E_FLAG_HW_ATR_EVICT_CAPABLE
;
8620 pf
->eeprom_version
= 0xDEAD;
8621 pf
->lan_veb
= I40E_NO_VEB
;
8622 pf
->lan_vsi
= I40E_NO_VSI
;
8624 /* By default FW has this off for performance reasons */
8625 pf
->flags
&= ~I40E_FLAG_VEB_STATS_ENABLED
;
8627 /* set up queue assignment tracking */
8628 size
= sizeof(struct i40e_lump_tracking
)
8629 + (sizeof(u16
) * pf
->hw
.func_caps
.num_tx_qp
);
8630 pf
->qp_pile
= kzalloc(size
, GFP_KERNEL
);
8635 pf
->qp_pile
->num_entries
= pf
->hw
.func_caps
.num_tx_qp
;
8636 pf
->qp_pile
->search_hint
= 0;
8638 pf
->tx_timeout_recovery_level
= 1;
8640 mutex_init(&pf
->switch_mutex
);
8642 /* If NPAR is enabled nudge the Tx scheduler */
8643 if (pf
->hw
.func_caps
.npar_enable
&& (!i40e_get_npar_bw_setting(pf
)))
8644 i40e_set_npar_bw_setting(pf
);
8651 * i40e_set_ntuple - set the ntuple feature flag and take action
8652 * @pf: board private structure to initialize
8653 * @features: the feature set that the stack is suggesting
8655 * returns a bool to indicate if reset needs to happen
8657 bool i40e_set_ntuple(struct i40e_pf
*pf
, netdev_features_t features
)
8659 bool need_reset
= false;
8661 /* Check if Flow Director n-tuple support was enabled or disabled. If
8662 * the state changed, we need to reset.
8664 if (features
& NETIF_F_NTUPLE
) {
8665 /* Enable filters and mark for reset */
8666 if (!(pf
->flags
& I40E_FLAG_FD_SB_ENABLED
))
8668 /* enable FD_SB only if there is MSI-X vector */
8669 if (pf
->num_fdsb_msix
> 0)
8670 pf
->flags
|= I40E_FLAG_FD_SB_ENABLED
;
8672 /* turn off filters, mark for reset and clear SW filter list */
8673 if (pf
->flags
& I40E_FLAG_FD_SB_ENABLED
) {
8675 i40e_fdir_filter_exit(pf
);
8677 pf
->flags
&= ~I40E_FLAG_FD_SB_ENABLED
;
8678 pf
->auto_disable_flags
&= ~I40E_FLAG_FD_SB_ENABLED
;
8679 /* reset fd counters */
8680 pf
->fd_add_err
= pf
->fd_atr_cnt
= pf
->fd_tcp_rule
= 0;
8681 pf
->fdir_pf_active_filters
= 0;
8682 pf
->flags
|= I40E_FLAG_FD_ATR_ENABLED
;
8683 if (I40E_DEBUG_FD
& pf
->hw
.debug_mask
)
8684 dev_info(&pf
->pdev
->dev
, "ATR re-enabled.\n");
8685 /* if ATR was auto disabled it can be re-enabled. */
8686 if ((pf
->flags
& I40E_FLAG_FD_ATR_ENABLED
) &&
8687 (pf
->auto_disable_flags
& I40E_FLAG_FD_ATR_ENABLED
))
8688 pf
->auto_disable_flags
&= ~I40E_FLAG_FD_ATR_ENABLED
;
8694 * i40e_set_features - set the netdev feature flags
8695 * @netdev: ptr to the netdev being adjusted
8696 * @features: the feature set that the stack is suggesting
8698 static int i40e_set_features(struct net_device
*netdev
,
8699 netdev_features_t features
)
8701 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
8702 struct i40e_vsi
*vsi
= np
->vsi
;
8703 struct i40e_pf
*pf
= vsi
->back
;
8706 if (features
& NETIF_F_HW_VLAN_CTAG_RX
)
8707 i40e_vlan_stripping_enable(vsi
);
8709 i40e_vlan_stripping_disable(vsi
);
8711 need_reset
= i40e_set_ntuple(pf
, features
);
8714 i40e_do_reset(pf
, BIT_ULL(__I40E_PF_RESET_REQUESTED
));
8720 * i40e_get_udp_port_idx - Lookup a possibly offloaded for Rx UDP port
8721 * @pf: board private structure
8722 * @port: The UDP port to look up
8724 * Returns the index number or I40E_MAX_PF_UDP_OFFLOAD_PORTS if port not found
8726 static u8
i40e_get_udp_port_idx(struct i40e_pf
*pf
, __be16 port
)
8730 for (i
= 0; i
< I40E_MAX_PF_UDP_OFFLOAD_PORTS
; i
++) {
8731 if (pf
->udp_ports
[i
].index
== port
)
8739 * i40e_udp_tunnel_add - Get notifications about UDP tunnel ports that come up
8740 * @netdev: This physical port's netdev
8741 * @ti: Tunnel endpoint information
8743 static void i40e_udp_tunnel_add(struct net_device
*netdev
,
8744 struct udp_tunnel_info
*ti
)
8746 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
8747 struct i40e_vsi
*vsi
= np
->vsi
;
8748 struct i40e_pf
*pf
= vsi
->back
;
8749 __be16 port
= ti
->port
;
8753 idx
= i40e_get_udp_port_idx(pf
, port
);
8755 /* Check if port already exists */
8756 if (idx
< I40E_MAX_PF_UDP_OFFLOAD_PORTS
) {
8757 netdev_info(netdev
, "port %d already offloaded\n",
8762 /* Now check if there is space to add the new port */
8763 next_idx
= i40e_get_udp_port_idx(pf
, 0);
8765 if (next_idx
== I40E_MAX_PF_UDP_OFFLOAD_PORTS
) {
8766 netdev_info(netdev
, "maximum number of offloaded UDP ports reached, not adding port %d\n",
8772 case UDP_TUNNEL_TYPE_VXLAN
:
8773 pf
->udp_ports
[next_idx
].type
= I40E_AQC_TUNNEL_TYPE_VXLAN
;
8775 case UDP_TUNNEL_TYPE_GENEVE
:
8776 if (!(pf
->flags
& I40E_FLAG_GENEVE_OFFLOAD_CAPABLE
))
8778 pf
->udp_ports
[next_idx
].type
= I40E_AQC_TUNNEL_TYPE_NGE
;
8784 /* New port: add it and mark its index in the bitmap */
8785 pf
->udp_ports
[next_idx
].index
= port
;
8786 pf
->pending_udp_bitmap
|= BIT_ULL(next_idx
);
8787 pf
->flags
|= I40E_FLAG_UDP_FILTER_SYNC
;
8791 * i40e_udp_tunnel_del - Get notifications about UDP tunnel ports that go away
8792 * @netdev: This physical port's netdev
8793 * @ti: Tunnel endpoint information
8795 static void i40e_udp_tunnel_del(struct net_device
*netdev
,
8796 struct udp_tunnel_info
*ti
)
8798 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
8799 struct i40e_vsi
*vsi
= np
->vsi
;
8800 struct i40e_pf
*pf
= vsi
->back
;
8801 __be16 port
= ti
->port
;
8804 idx
= i40e_get_udp_port_idx(pf
, port
);
8806 /* Check if port already exists */
8807 if (idx
>= I40E_MAX_PF_UDP_OFFLOAD_PORTS
)
8811 case UDP_TUNNEL_TYPE_VXLAN
:
8812 if (pf
->udp_ports
[idx
].type
!= I40E_AQC_TUNNEL_TYPE_VXLAN
)
8815 case UDP_TUNNEL_TYPE_GENEVE
:
8816 if (pf
->udp_ports
[idx
].type
!= I40E_AQC_TUNNEL_TYPE_NGE
)
8823 /* if port exists, set it to 0 (mark for deletion)
8824 * and make it pending
8826 pf
->udp_ports
[idx
].index
= 0;
8827 pf
->pending_udp_bitmap
|= BIT_ULL(idx
);
8828 pf
->flags
|= I40E_FLAG_UDP_FILTER_SYNC
;
8832 netdev_warn(netdev
, "UDP port %d was not found, not deleting\n",
8836 static int i40e_get_phys_port_id(struct net_device
*netdev
,
8837 struct netdev_phys_item_id
*ppid
)
8839 struct i40e_netdev_priv
*np
= netdev_priv(netdev
);
8840 struct i40e_pf
*pf
= np
->vsi
->back
;
8841 struct i40e_hw
*hw
= &pf
->hw
;
8843 if (!(pf
->flags
& I40E_FLAG_PORT_ID_VALID
))
8846 ppid
->id_len
= min_t(int, sizeof(hw
->mac
.port_addr
), sizeof(ppid
->id
));
8847 memcpy(ppid
->id
, hw
->mac
.port_addr
, ppid
->id_len
);
8853 * i40e_ndo_fdb_add - add an entry to the hardware database
8854 * @ndm: the input from the stack
8855 * @tb: pointer to array of nladdr (unused)
8856 * @dev: the net device pointer
8857 * @addr: the MAC address entry being added
8858 * @flags: instructions from stack about fdb operation
8860 static int i40e_ndo_fdb_add(struct ndmsg
*ndm
, struct nlattr
*tb
[],
8861 struct net_device
*dev
,
8862 const unsigned char *addr
, u16 vid
,
8865 struct i40e_netdev_priv
*np
= netdev_priv(dev
);
8866 struct i40e_pf
*pf
= np
->vsi
->back
;
8869 if (!(pf
->flags
& I40E_FLAG_SRIOV_ENABLED
))
8873 pr_info("%s: vlans aren't supported yet for dev_uc|mc_add()\n", dev
->name
);
8877 /* Hardware does not support aging addresses so if a
8878 * ndm_state is given only allow permanent addresses
8880 if (ndm
->ndm_state
&& !(ndm
->ndm_state
& NUD_PERMANENT
)) {
8881 netdev_info(dev
, "FDB only supports static addresses\n");
8885 if (is_unicast_ether_addr(addr
) || is_link_local_ether_addr(addr
))
8886 err
= dev_uc_add_excl(dev
, addr
);
8887 else if (is_multicast_ether_addr(addr
))
8888 err
= dev_mc_add_excl(dev
, addr
);
8892 /* Only return duplicate errors if NLM_F_EXCL is set */
8893 if (err
== -EEXIST
&& !(flags
& NLM_F_EXCL
))
8900 * i40e_ndo_bridge_setlink - Set the hardware bridge mode
8901 * @dev: the netdev being configured
8902 * @nlh: RTNL message
8904 * Inserts a new hardware bridge if not already created and
8905 * enables the bridging mode requested (VEB or VEPA). If the
8906 * hardware bridge has already been inserted and the request
8907 * is to change the mode then that requires a PF reset to
8908 * allow rebuild of the components with required hardware
8909 * bridge mode enabled.
8911 static int i40e_ndo_bridge_setlink(struct net_device
*dev
,
8912 struct nlmsghdr
*nlh
,
8915 struct i40e_netdev_priv
*np
= netdev_priv(dev
);
8916 struct i40e_vsi
*vsi
= np
->vsi
;
8917 struct i40e_pf
*pf
= vsi
->back
;
8918 struct i40e_veb
*veb
= NULL
;
8919 struct nlattr
*attr
, *br_spec
;
8922 /* Only for PF VSI for now */
8923 if (vsi
->seid
!= pf
->vsi
[pf
->lan_vsi
]->seid
)
8926 /* Find the HW bridge for PF VSI */
8927 for (i
= 0; i
< I40E_MAX_VEB
&& !veb
; i
++) {
8928 if (pf
->veb
[i
] && pf
->veb
[i
]->seid
== vsi
->uplink_seid
)
8932 br_spec
= nlmsg_find_attr(nlh
, sizeof(struct ifinfomsg
), IFLA_AF_SPEC
);
8934 nla_for_each_nested(attr
, br_spec
, rem
) {
8937 if (nla_type(attr
) != IFLA_BRIDGE_MODE
)
8940 mode
= nla_get_u16(attr
);
8941 if ((mode
!= BRIDGE_MODE_VEPA
) &&
8942 (mode
!= BRIDGE_MODE_VEB
))
8945 /* Insert a new HW bridge */
8947 veb
= i40e_veb_setup(pf
, 0, vsi
->uplink_seid
, vsi
->seid
,
8948 vsi
->tc_config
.enabled_tc
);
8950 veb
->bridge_mode
= mode
;
8951 i40e_config_bridge_mode(veb
);
8953 /* No Bridge HW offload available */
8957 } else if (mode
!= veb
->bridge_mode
) {
8958 /* Existing HW bridge but different mode needs reset */
8959 veb
->bridge_mode
= mode
;
8960 /* TODO: If no VFs or VMDq VSIs, disallow VEB mode */
8961 if (mode
== BRIDGE_MODE_VEB
)
8962 pf
->flags
|= I40E_FLAG_VEB_MODE_ENABLED
;
8964 pf
->flags
&= ~I40E_FLAG_VEB_MODE_ENABLED
;
8965 i40e_do_reset(pf
, BIT_ULL(__I40E_PF_RESET_REQUESTED
));
8974 * i40e_ndo_bridge_getlink - Get the hardware bridge mode
8977 * @seq: RTNL message seq #
8978 * @dev: the netdev being configured
8979 * @filter_mask: unused
8980 * @nlflags: netlink flags passed in
8982 * Return the mode in which the hardware bridge is operating in
8985 static int i40e_ndo_bridge_getlink(struct sk_buff
*skb
, u32 pid
, u32 seq
,
8986 struct net_device
*dev
,
8987 u32 __always_unused filter_mask
,
8990 struct i40e_netdev_priv
*np
= netdev_priv(dev
);
8991 struct i40e_vsi
*vsi
= np
->vsi
;
8992 struct i40e_pf
*pf
= vsi
->back
;
8993 struct i40e_veb
*veb
= NULL
;
8996 /* Only for PF VSI for now */
8997 if (vsi
->seid
!= pf
->vsi
[pf
->lan_vsi
]->seid
)
9000 /* Find the HW bridge for the PF VSI */
9001 for (i
= 0; i
< I40E_MAX_VEB
&& !veb
; i
++) {
9002 if (pf
->veb
[i
] && pf
->veb
[i
]->seid
== vsi
->uplink_seid
)
9009 return ndo_dflt_bridge_getlink(skb
, pid
, seq
, dev
, veb
->bridge_mode
,
9010 nlflags
, 0, 0, filter_mask
, NULL
);
9013 /* Hardware supports L4 tunnel length of 128B (=2^7) which includes
9014 * inner mac plus all inner ethertypes.
9016 #define I40E_MAX_TUNNEL_HDR_LEN 128
9018 * i40e_features_check - Validate encapsulated packet conforms to limits
9020 * @dev: This physical port's netdev
9021 * @features: Offload features that the stack believes apply
9023 static netdev_features_t
i40e_features_check(struct sk_buff
*skb
,
9024 struct net_device
*dev
,
9025 netdev_features_t features
)
9027 if (skb
->encapsulation
&&
9028 ((skb_inner_network_header(skb
) - skb_transport_header(skb
)) >
9029 I40E_MAX_TUNNEL_HDR_LEN
))
9030 return features
& ~(NETIF_F_CSUM_MASK
| NETIF_F_GSO_MASK
);
9035 static const struct net_device_ops i40e_netdev_ops
= {
9036 .ndo_open
= i40e_open
,
9037 .ndo_stop
= i40e_close
,
9038 .ndo_start_xmit
= i40e_lan_xmit_frame
,
9039 .ndo_get_stats64
= i40e_get_netdev_stats_struct
,
9040 .ndo_set_rx_mode
= i40e_set_rx_mode
,
9041 .ndo_validate_addr
= eth_validate_addr
,
9042 .ndo_set_mac_address
= i40e_set_mac
,
9043 .ndo_change_mtu
= i40e_change_mtu
,
9044 .ndo_do_ioctl
= i40e_ioctl
,
9045 .ndo_tx_timeout
= i40e_tx_timeout
,
9046 .ndo_vlan_rx_add_vid
= i40e_vlan_rx_add_vid
,
9047 .ndo_vlan_rx_kill_vid
= i40e_vlan_rx_kill_vid
,
9048 #ifdef CONFIG_NET_POLL_CONTROLLER
9049 .ndo_poll_controller
= i40e_netpoll
,
9051 .ndo_setup_tc
= __i40e_setup_tc
,
9053 .ndo_fcoe_enable
= i40e_fcoe_enable
,
9054 .ndo_fcoe_disable
= i40e_fcoe_disable
,
9056 .ndo_set_features
= i40e_set_features
,
9057 .ndo_set_vf_mac
= i40e_ndo_set_vf_mac
,
9058 .ndo_set_vf_vlan
= i40e_ndo_set_vf_port_vlan
,
9059 .ndo_set_vf_rate
= i40e_ndo_set_vf_bw
,
9060 .ndo_get_vf_config
= i40e_ndo_get_vf_config
,
9061 .ndo_set_vf_link_state
= i40e_ndo_set_vf_link_state
,
9062 .ndo_set_vf_spoofchk
= i40e_ndo_set_vf_spoofchk
,
9063 .ndo_set_vf_trust
= i40e_ndo_set_vf_trust
,
9064 .ndo_udp_tunnel_add
= i40e_udp_tunnel_add
,
9065 .ndo_udp_tunnel_del
= i40e_udp_tunnel_del
,
9066 .ndo_get_phys_port_id
= i40e_get_phys_port_id
,
9067 .ndo_fdb_add
= i40e_ndo_fdb_add
,
9068 .ndo_features_check
= i40e_features_check
,
9069 .ndo_bridge_getlink
= i40e_ndo_bridge_getlink
,
9070 .ndo_bridge_setlink
= i40e_ndo_bridge_setlink
,
9074 * i40e_config_netdev - Setup the netdev flags
9075 * @vsi: the VSI being configured
9077 * Returns 0 on success, negative value on failure
9079 static int i40e_config_netdev(struct i40e_vsi
*vsi
)
9081 struct i40e_pf
*pf
= vsi
->back
;
9082 struct i40e_hw
*hw
= &pf
->hw
;
9083 struct i40e_netdev_priv
*np
;
9084 struct net_device
*netdev
;
9085 u8 mac_addr
[ETH_ALEN
];
9088 etherdev_size
= sizeof(struct i40e_netdev_priv
);
9089 netdev
= alloc_etherdev_mq(etherdev_size
, vsi
->alloc_queue_pairs
);
9093 vsi
->netdev
= netdev
;
9094 np
= netdev_priv(netdev
);
9097 netdev
->hw_enc_features
|= NETIF_F_SG
|
9101 NETIF_F_SOFT_FEATURES
|
9106 NETIF_F_GSO_GRE_CSUM
|
9107 NETIF_F_GSO_IPXIP4
|
9108 NETIF_F_GSO_IPXIP6
|
9109 NETIF_F_GSO_UDP_TUNNEL
|
9110 NETIF_F_GSO_UDP_TUNNEL_CSUM
|
9111 NETIF_F_GSO_PARTIAL
|
9117 if (!(pf
->flags
& I40E_FLAG_OUTER_UDP_CSUM_CAPABLE
))
9118 netdev
->gso_partial_features
|= NETIF_F_GSO_UDP_TUNNEL_CSUM
;
9120 netdev
->gso_partial_features
|= NETIF_F_GSO_GRE_CSUM
;
9122 /* record features VLANs can make use of */
9123 netdev
->vlan_features
|= netdev
->hw_enc_features
|
9124 NETIF_F_TSO_MANGLEID
;
9126 if (!(pf
->flags
& I40E_FLAG_MFP_ENABLED
))
9127 netdev
->hw_features
|= NETIF_F_NTUPLE
;
9129 netdev
->hw_features
|= netdev
->hw_enc_features
|
9130 NETIF_F_HW_VLAN_CTAG_TX
|
9131 NETIF_F_HW_VLAN_CTAG_RX
;
9133 netdev
->features
|= netdev
->hw_features
| NETIF_F_HW_VLAN_CTAG_FILTER
;
9134 netdev
->hw_enc_features
|= NETIF_F_TSO_MANGLEID
;
9136 if (vsi
->type
== I40E_VSI_MAIN
) {
9137 SET_NETDEV_DEV(netdev
, &pf
->pdev
->dev
);
9138 ether_addr_copy(mac_addr
, hw
->mac
.perm_addr
);
9139 /* The following steps are necessary to prevent reception
9140 * of tagged packets - some older NVM configurations load a
9141 * default a MAC-VLAN filter that accepts any tagged packet
9142 * which must be replaced by a normal filter.
9144 i40e_rm_default_mac_filter(vsi
, mac_addr
);
9145 spin_lock_bh(&vsi
->mac_filter_list_lock
);
9146 i40e_add_filter(vsi
, mac_addr
, I40E_VLAN_ANY
, false, true);
9147 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
9149 /* relate the VSI_VMDQ name to the VSI_MAIN name */
9150 snprintf(netdev
->name
, IFNAMSIZ
, "%sv%%d",
9151 pf
->vsi
[pf
->lan_vsi
]->netdev
->name
);
9152 random_ether_addr(mac_addr
);
9154 spin_lock_bh(&vsi
->mac_filter_list_lock
);
9155 i40e_add_filter(vsi
, mac_addr
, I40E_VLAN_ANY
, false, false);
9156 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
9159 ether_addr_copy(netdev
->dev_addr
, mac_addr
);
9160 ether_addr_copy(netdev
->perm_addr
, mac_addr
);
9162 netdev
->priv_flags
|= IFF_UNICAST_FLT
;
9163 netdev
->priv_flags
|= IFF_SUPP_NOFCS
;
9164 /* Setup netdev TC information */
9165 i40e_vsi_config_netdev_tc(vsi
, vsi
->tc_config
.enabled_tc
);
9167 netdev
->netdev_ops
= &i40e_netdev_ops
;
9168 netdev
->watchdog_timeo
= 5 * HZ
;
9169 i40e_set_ethtool_ops(netdev
);
9171 i40e_fcoe_config_netdev(netdev
, vsi
);
9178 * i40e_vsi_delete - Delete a VSI from the switch
9179 * @vsi: the VSI being removed
9181 * Returns 0 on success, negative value on failure
9183 static void i40e_vsi_delete(struct i40e_vsi
*vsi
)
9185 /* remove default VSI is not allowed */
9186 if (vsi
== vsi
->back
->vsi
[vsi
->back
->lan_vsi
])
9189 i40e_aq_delete_element(&vsi
->back
->hw
, vsi
->seid
, NULL
);
9193 * i40e_is_vsi_uplink_mode_veb - Check if the VSI's uplink bridge mode is VEB
9194 * @vsi: the VSI being queried
9196 * Returns 1 if HW bridge mode is VEB and return 0 in case of VEPA mode
9198 int i40e_is_vsi_uplink_mode_veb(struct i40e_vsi
*vsi
)
9200 struct i40e_veb
*veb
;
9201 struct i40e_pf
*pf
= vsi
->back
;
9203 /* Uplink is not a bridge so default to VEB */
9204 if (vsi
->veb_idx
== I40E_NO_VEB
)
9207 veb
= pf
->veb
[vsi
->veb_idx
];
9209 dev_info(&pf
->pdev
->dev
,
9210 "There is no veb associated with the bridge\n");
9214 /* Uplink is a bridge in VEPA mode */
9215 if (veb
->bridge_mode
& BRIDGE_MODE_VEPA
) {
9218 /* Uplink is a bridge in VEB mode */
9222 /* VEPA is now default bridge, so return 0 */
9227 * i40e_add_vsi - Add a VSI to the switch
9228 * @vsi: the VSI being configured
9230 * This initializes a VSI context depending on the VSI type to be added and
9231 * passes it down to the add_vsi aq command.
9233 static int i40e_add_vsi(struct i40e_vsi
*vsi
)
9236 i40e_status aq_ret
= 0;
9237 struct i40e_pf
*pf
= vsi
->back
;
9238 struct i40e_hw
*hw
= &pf
->hw
;
9239 struct i40e_vsi_context ctxt
;
9240 struct i40e_mac_filter
*f
, *ftmp
;
9242 u8 enabled_tc
= 0x1; /* TC0 enabled */
9245 memset(&ctxt
, 0, sizeof(ctxt
));
9246 switch (vsi
->type
) {
9248 /* The PF's main VSI is already setup as part of the
9249 * device initialization, so we'll not bother with
9250 * the add_vsi call, but we will retrieve the current
9253 ctxt
.seid
= pf
->main_vsi_seid
;
9254 ctxt
.pf_num
= pf
->hw
.pf_id
;
9256 ret
= i40e_aq_get_vsi_params(&pf
->hw
, &ctxt
, NULL
);
9257 ctxt
.flags
= I40E_AQ_VSI_TYPE_PF
;
9259 dev_info(&pf
->pdev
->dev
,
9260 "couldn't get PF vsi config, err %s aq_err %s\n",
9261 i40e_stat_str(&pf
->hw
, ret
),
9262 i40e_aq_str(&pf
->hw
,
9263 pf
->hw
.aq
.asq_last_status
));
9266 vsi
->info
= ctxt
.info
;
9267 vsi
->info
.valid_sections
= 0;
9269 vsi
->seid
= ctxt
.seid
;
9270 vsi
->id
= ctxt
.vsi_number
;
9272 enabled_tc
= i40e_pf_get_tc_map(pf
);
9274 /* MFP mode setup queue map and update VSI */
9275 if ((pf
->flags
& I40E_FLAG_MFP_ENABLED
) &&
9276 !(pf
->hw
.func_caps
.iscsi
)) { /* NIC type PF */
9277 memset(&ctxt
, 0, sizeof(ctxt
));
9278 ctxt
.seid
= pf
->main_vsi_seid
;
9279 ctxt
.pf_num
= pf
->hw
.pf_id
;
9281 i40e_vsi_setup_queue_map(vsi
, &ctxt
, enabled_tc
, false);
9282 ret
= i40e_aq_update_vsi_params(hw
, &ctxt
, NULL
);
9284 dev_info(&pf
->pdev
->dev
,
9285 "update vsi failed, err %s aq_err %s\n",
9286 i40e_stat_str(&pf
->hw
, ret
),
9287 i40e_aq_str(&pf
->hw
,
9288 pf
->hw
.aq
.asq_last_status
));
9292 /* update the local VSI info queue map */
9293 i40e_vsi_update_queue_map(vsi
, &ctxt
);
9294 vsi
->info
.valid_sections
= 0;
9296 /* Default/Main VSI is only enabled for TC0
9297 * reconfigure it to enable all TCs that are
9298 * available on the port in SFP mode.
9299 * For MFP case the iSCSI PF would use this
9300 * flow to enable LAN+iSCSI TC.
9302 ret
= i40e_vsi_config_tc(vsi
, enabled_tc
);
9304 dev_info(&pf
->pdev
->dev
,
9305 "failed to configure TCs for main VSI tc_map 0x%08x, err %s aq_err %s\n",
9307 i40e_stat_str(&pf
->hw
, ret
),
9308 i40e_aq_str(&pf
->hw
,
9309 pf
->hw
.aq
.asq_last_status
));
9316 ctxt
.pf_num
= hw
->pf_id
;
9318 ctxt
.uplink_seid
= vsi
->uplink_seid
;
9319 ctxt
.connection_type
= I40E_AQ_VSI_CONN_TYPE_NORMAL
;
9320 ctxt
.flags
= I40E_AQ_VSI_TYPE_PF
;
9321 if ((pf
->flags
& I40E_FLAG_VEB_MODE_ENABLED
) &&
9322 (i40e_is_vsi_uplink_mode_veb(vsi
))) {
9323 ctxt
.info
.valid_sections
|=
9324 cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID
);
9325 ctxt
.info
.switch_id
=
9326 cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB
);
9328 i40e_vsi_setup_queue_map(vsi
, &ctxt
, enabled_tc
, true);
9331 case I40E_VSI_VMDQ2
:
9332 ctxt
.pf_num
= hw
->pf_id
;
9334 ctxt
.uplink_seid
= vsi
->uplink_seid
;
9335 ctxt
.connection_type
= I40E_AQ_VSI_CONN_TYPE_NORMAL
;
9336 ctxt
.flags
= I40E_AQ_VSI_TYPE_VMDQ2
;
9338 /* This VSI is connected to VEB so the switch_id
9339 * should be set to zero by default.
9341 if (i40e_is_vsi_uplink_mode_veb(vsi
)) {
9342 ctxt
.info
.valid_sections
|=
9343 cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID
);
9344 ctxt
.info
.switch_id
=
9345 cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB
);
9348 /* Setup the VSI tx/rx queue map for TC0 only for now */
9349 i40e_vsi_setup_queue_map(vsi
, &ctxt
, enabled_tc
, true);
9352 case I40E_VSI_SRIOV
:
9353 ctxt
.pf_num
= hw
->pf_id
;
9354 ctxt
.vf_num
= vsi
->vf_id
+ hw
->func_caps
.vf_base_id
;
9355 ctxt
.uplink_seid
= vsi
->uplink_seid
;
9356 ctxt
.connection_type
= I40E_AQ_VSI_CONN_TYPE_NORMAL
;
9357 ctxt
.flags
= I40E_AQ_VSI_TYPE_VF
;
9359 /* This VSI is connected to VEB so the switch_id
9360 * should be set to zero by default.
9362 if (i40e_is_vsi_uplink_mode_veb(vsi
)) {
9363 ctxt
.info
.valid_sections
|=
9364 cpu_to_le16(I40E_AQ_VSI_PROP_SWITCH_VALID
);
9365 ctxt
.info
.switch_id
=
9366 cpu_to_le16(I40E_AQ_VSI_SW_ID_FLAG_ALLOW_LB
);
9369 if (vsi
->back
->flags
& I40E_FLAG_IWARP_ENABLED
) {
9370 ctxt
.info
.valid_sections
|=
9371 cpu_to_le16(I40E_AQ_VSI_PROP_QUEUE_OPT_VALID
);
9372 ctxt
.info
.queueing_opt_flags
|=
9373 (I40E_AQ_VSI_QUE_OPT_TCP_ENA
|
9374 I40E_AQ_VSI_QUE_OPT_RSS_LUT_VSI
);
9377 ctxt
.info
.valid_sections
|= cpu_to_le16(I40E_AQ_VSI_PROP_VLAN_VALID
);
9378 ctxt
.info
.port_vlan_flags
|= I40E_AQ_VSI_PVLAN_MODE_ALL
;
9379 if (pf
->vf
[vsi
->vf_id
].spoofchk
) {
9380 ctxt
.info
.valid_sections
|=
9381 cpu_to_le16(I40E_AQ_VSI_PROP_SECURITY_VALID
);
9382 ctxt
.info
.sec_flags
|=
9383 (I40E_AQ_VSI_SEC_FLAG_ENABLE_VLAN_CHK
|
9384 I40E_AQ_VSI_SEC_FLAG_ENABLE_MAC_CHK
);
9386 /* Setup the VSI tx/rx queue map for TC0 only for now */
9387 i40e_vsi_setup_queue_map(vsi
, &ctxt
, enabled_tc
, true);
9392 ret
= i40e_fcoe_vsi_init(vsi
, &ctxt
);
9394 dev_info(&pf
->pdev
->dev
, "failed to initialize FCoE VSI\n");
9399 #endif /* I40E_FCOE */
9400 case I40E_VSI_IWARP
:
9401 /* send down message to iWARP */
9408 if (vsi
->type
!= I40E_VSI_MAIN
) {
9409 ret
= i40e_aq_add_vsi(hw
, &ctxt
, NULL
);
9411 dev_info(&vsi
->back
->pdev
->dev
,
9412 "add vsi failed, err %s aq_err %s\n",
9413 i40e_stat_str(&pf
->hw
, ret
),
9414 i40e_aq_str(&pf
->hw
,
9415 pf
->hw
.aq
.asq_last_status
));
9419 vsi
->info
= ctxt
.info
;
9420 vsi
->info
.valid_sections
= 0;
9421 vsi
->seid
= ctxt
.seid
;
9422 vsi
->id
= ctxt
.vsi_number
;
9424 /* Except FDIR VSI, for all othet VSI set the broadcast filter */
9425 if (vsi
->type
!= I40E_VSI_FDIR
) {
9426 aq_ret
= i40e_aq_set_vsi_broadcast(hw
, vsi
->seid
, true, NULL
);
9428 ret
= i40e_aq_rc_to_posix(aq_ret
,
9429 hw
->aq
.asq_last_status
);
9430 dev_info(&pf
->pdev
->dev
,
9431 "set brdcast promisc failed, err %s, aq_err %s\n",
9432 i40e_stat_str(hw
, aq_ret
),
9433 i40e_aq_str(hw
, hw
->aq
.asq_last_status
));
9437 vsi
->active_filters
= 0;
9438 clear_bit(__I40E_FILTER_OVERFLOW_PROMISC
, &vsi
->state
);
9439 spin_lock_bh(&vsi
->mac_filter_list_lock
);
9440 /* If macvlan filters already exist, force them to get loaded */
9441 list_for_each_entry_safe(f
, ftmp
, &vsi
->mac_filter_list
, list
) {
9442 f
->state
= I40E_FILTER_NEW
;
9445 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
9448 vsi
->flags
|= I40E_VSI_FLAG_FILTER_CHANGED
;
9449 pf
->flags
|= I40E_FLAG_FILTER_SYNC
;
9452 /* Update VSI BW information */
9453 ret
= i40e_vsi_get_bw_info(vsi
);
9455 dev_info(&pf
->pdev
->dev
,
9456 "couldn't get vsi bw info, err %s aq_err %s\n",
9457 i40e_stat_str(&pf
->hw
, ret
),
9458 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
9459 /* VSI is already added so not tearing that up */
9468 * i40e_vsi_release - Delete a VSI and free its resources
9469 * @vsi: the VSI being removed
9471 * Returns 0 on success or < 0 on error
9473 int i40e_vsi_release(struct i40e_vsi
*vsi
)
9475 struct i40e_mac_filter
*f
, *ftmp
;
9476 struct i40e_veb
*veb
= NULL
;
9483 /* release of a VEB-owner or last VSI is not allowed */
9484 if (vsi
->flags
& I40E_VSI_FLAG_VEB_OWNER
) {
9485 dev_info(&pf
->pdev
->dev
, "VSI %d has existing VEB %d\n",
9486 vsi
->seid
, vsi
->uplink_seid
);
9489 if (vsi
== pf
->vsi
[pf
->lan_vsi
] &&
9490 !test_bit(__I40E_DOWN
, &pf
->state
)) {
9491 dev_info(&pf
->pdev
->dev
, "Can't remove PF VSI\n");
9495 uplink_seid
= vsi
->uplink_seid
;
9496 if (vsi
->type
!= I40E_VSI_SRIOV
) {
9497 if (vsi
->netdev_registered
) {
9498 vsi
->netdev_registered
= false;
9500 /* results in a call to i40e_close() */
9501 unregister_netdev(vsi
->netdev
);
9504 i40e_vsi_close(vsi
);
9506 i40e_vsi_disable_irq(vsi
);
9509 spin_lock_bh(&vsi
->mac_filter_list_lock
);
9510 list_for_each_entry_safe(f
, ftmp
, &vsi
->mac_filter_list
, list
)
9511 i40e_del_filter(vsi
, f
->macaddr
, f
->vlan
,
9512 f
->is_vf
, f
->is_netdev
);
9513 spin_unlock_bh(&vsi
->mac_filter_list_lock
);
9515 i40e_sync_vsi_filters(vsi
);
9517 i40e_vsi_delete(vsi
);
9518 i40e_vsi_free_q_vectors(vsi
);
9520 free_netdev(vsi
->netdev
);
9523 i40e_vsi_clear_rings(vsi
);
9524 i40e_vsi_clear(vsi
);
9526 /* If this was the last thing on the VEB, except for the
9527 * controlling VSI, remove the VEB, which puts the controlling
9528 * VSI onto the next level down in the switch.
9530 * Well, okay, there's one more exception here: don't remove
9531 * the orphan VEBs yet. We'll wait for an explicit remove request
9532 * from up the network stack.
9534 for (n
= 0, i
= 0; i
< pf
->num_alloc_vsi
; i
++) {
9536 pf
->vsi
[i
]->uplink_seid
== uplink_seid
&&
9537 (pf
->vsi
[i
]->flags
& I40E_VSI_FLAG_VEB_OWNER
) == 0) {
9538 n
++; /* count the VSIs */
9541 for (i
= 0; i
< I40E_MAX_VEB
; i
++) {
9544 if (pf
->veb
[i
]->uplink_seid
== uplink_seid
)
9545 n
++; /* count the VEBs */
9546 if (pf
->veb
[i
]->seid
== uplink_seid
)
9549 if (n
== 0 && veb
&& veb
->uplink_seid
!= 0)
9550 i40e_veb_release(veb
);
9556 * i40e_vsi_setup_vectors - Set up the q_vectors for the given VSI
9557 * @vsi: ptr to the VSI
9559 * This should only be called after i40e_vsi_mem_alloc() which allocates the
9560 * corresponding SW VSI structure and initializes num_queue_pairs for the
9561 * newly allocated VSI.
9563 * Returns 0 on success or negative on failure
9565 static int i40e_vsi_setup_vectors(struct i40e_vsi
*vsi
)
9568 struct i40e_pf
*pf
= vsi
->back
;
9570 if (vsi
->q_vectors
[0]) {
9571 dev_info(&pf
->pdev
->dev
, "VSI %d has existing q_vectors\n",
9576 if (vsi
->base_vector
) {
9577 dev_info(&pf
->pdev
->dev
, "VSI %d has non-zero base vector %d\n",
9578 vsi
->seid
, vsi
->base_vector
);
9582 ret
= i40e_vsi_alloc_q_vectors(vsi
);
9584 dev_info(&pf
->pdev
->dev
,
9585 "failed to allocate %d q_vector for VSI %d, ret=%d\n",
9586 vsi
->num_q_vectors
, vsi
->seid
, ret
);
9587 vsi
->num_q_vectors
= 0;
9588 goto vector_setup_out
;
9591 /* In Legacy mode, we do not have to get any other vector since we
9592 * piggyback on the misc/ICR0 for queue interrupts.
9594 if (!(pf
->flags
& I40E_FLAG_MSIX_ENABLED
))
9596 if (vsi
->num_q_vectors
)
9597 vsi
->base_vector
= i40e_get_lump(pf
, pf
->irq_pile
,
9598 vsi
->num_q_vectors
, vsi
->idx
);
9599 if (vsi
->base_vector
< 0) {
9600 dev_info(&pf
->pdev
->dev
,
9601 "failed to get tracking for %d vectors for VSI %d, err=%d\n",
9602 vsi
->num_q_vectors
, vsi
->seid
, vsi
->base_vector
);
9603 i40e_vsi_free_q_vectors(vsi
);
9605 goto vector_setup_out
;
9613 * i40e_vsi_reinit_setup - return and reallocate resources for a VSI
9614 * @vsi: pointer to the vsi.
9616 * This re-allocates a vsi's queue resources.
9618 * Returns pointer to the successfully allocated and configured VSI sw struct
9619 * on success, otherwise returns NULL on failure.
9621 static struct i40e_vsi
*i40e_vsi_reinit_setup(struct i40e_vsi
*vsi
)
9632 i40e_put_lump(pf
->qp_pile
, vsi
->base_queue
, vsi
->idx
);
9633 i40e_vsi_clear_rings(vsi
);
9635 i40e_vsi_free_arrays(vsi
, false);
9636 i40e_set_num_rings_in_vsi(vsi
);
9637 ret
= i40e_vsi_alloc_arrays(vsi
, false);
9641 ret
= i40e_get_lump(pf
, pf
->qp_pile
, vsi
->alloc_queue_pairs
, vsi
->idx
);
9643 dev_info(&pf
->pdev
->dev
,
9644 "failed to get tracking for %d queues for VSI %d err %d\n",
9645 vsi
->alloc_queue_pairs
, vsi
->seid
, ret
);
9648 vsi
->base_queue
= ret
;
9650 /* Update the FW view of the VSI. Force a reset of TC and queue
9651 * layout configurations.
9653 enabled_tc
= pf
->vsi
[pf
->lan_vsi
]->tc_config
.enabled_tc
;
9654 pf
->vsi
[pf
->lan_vsi
]->tc_config
.enabled_tc
= 0;
9655 pf
->vsi
[pf
->lan_vsi
]->seid
= pf
->main_vsi_seid
;
9656 i40e_vsi_config_tc(pf
->vsi
[pf
->lan_vsi
], enabled_tc
);
9657 if (vsi
->type
== I40E_VSI_MAIN
)
9658 i40e_rm_default_mac_filter(vsi
, pf
->hw
.mac
.perm_addr
);
9660 /* assign it some queues */
9661 ret
= i40e_alloc_rings(vsi
);
9665 /* map all of the rings to the q_vectors */
9666 i40e_vsi_map_rings_to_vectors(vsi
);
9670 i40e_vsi_free_q_vectors(vsi
);
9671 if (vsi
->netdev_registered
) {
9672 vsi
->netdev_registered
= false;
9673 unregister_netdev(vsi
->netdev
);
9674 free_netdev(vsi
->netdev
);
9677 i40e_aq_delete_element(&pf
->hw
, vsi
->seid
, NULL
);
9679 i40e_vsi_clear(vsi
);
9684 * i40e_vsi_setup - Set up a VSI by a given type
9685 * @pf: board private structure
9687 * @uplink_seid: the switch element to link to
9688 * @param1: usage depends upon VSI type. For VF types, indicates VF id
9690 * This allocates the sw VSI structure and its queue resources, then add a VSI
9691 * to the identified VEB.
9693 * Returns pointer to the successfully allocated and configure VSI sw struct on
9694 * success, otherwise returns NULL on failure.
9696 struct i40e_vsi
*i40e_vsi_setup(struct i40e_pf
*pf
, u8 type
,
9697 u16 uplink_seid
, u32 param1
)
9699 struct i40e_vsi
*vsi
= NULL
;
9700 struct i40e_veb
*veb
= NULL
;
9704 /* The requested uplink_seid must be either
9705 * - the PF's port seid
9706 * no VEB is needed because this is the PF
9707 * or this is a Flow Director special case VSI
9708 * - seid of an existing VEB
9709 * - seid of a VSI that owns an existing VEB
9710 * - seid of a VSI that doesn't own a VEB
9711 * a new VEB is created and the VSI becomes the owner
9712 * - seid of the PF VSI, which is what creates the first VEB
9713 * this is a special case of the previous
9715 * Find which uplink_seid we were given and create a new VEB if needed
9717 for (i
= 0; i
< I40E_MAX_VEB
; i
++) {
9718 if (pf
->veb
[i
] && pf
->veb
[i
]->seid
== uplink_seid
) {
9724 if (!veb
&& uplink_seid
!= pf
->mac_seid
) {
9726 for (i
= 0; i
< pf
->num_alloc_vsi
; i
++) {
9727 if (pf
->vsi
[i
] && pf
->vsi
[i
]->seid
== uplink_seid
) {
9733 dev_info(&pf
->pdev
->dev
, "no such uplink_seid %d\n",
9738 if (vsi
->uplink_seid
== pf
->mac_seid
)
9739 veb
= i40e_veb_setup(pf
, 0, pf
->mac_seid
, vsi
->seid
,
9740 vsi
->tc_config
.enabled_tc
);
9741 else if ((vsi
->flags
& I40E_VSI_FLAG_VEB_OWNER
) == 0)
9742 veb
= i40e_veb_setup(pf
, 0, vsi
->uplink_seid
, vsi
->seid
,
9743 vsi
->tc_config
.enabled_tc
);
9745 if (vsi
->seid
!= pf
->vsi
[pf
->lan_vsi
]->seid
) {
9746 dev_info(&vsi
->back
->pdev
->dev
,
9747 "New VSI creation error, uplink seid of LAN VSI expected.\n");
9750 /* We come up by default in VEPA mode if SRIOV is not
9751 * already enabled, in which case we can't force VEPA
9754 if (!(pf
->flags
& I40E_FLAG_VEB_MODE_ENABLED
)) {
9755 veb
->bridge_mode
= BRIDGE_MODE_VEPA
;
9756 pf
->flags
&= ~I40E_FLAG_VEB_MODE_ENABLED
;
9758 i40e_config_bridge_mode(veb
);
9760 for (i
= 0; i
< I40E_MAX_VEB
&& !veb
; i
++) {
9761 if (pf
->veb
[i
] && pf
->veb
[i
]->seid
== vsi
->uplink_seid
)
9765 dev_info(&pf
->pdev
->dev
, "couldn't add VEB\n");
9769 vsi
->flags
|= I40E_VSI_FLAG_VEB_OWNER
;
9770 uplink_seid
= veb
->seid
;
9773 /* get vsi sw struct */
9774 v_idx
= i40e_vsi_mem_alloc(pf
, type
);
9777 vsi
= pf
->vsi
[v_idx
];
9781 vsi
->veb_idx
= (veb
? veb
->idx
: I40E_NO_VEB
);
9783 if (type
== I40E_VSI_MAIN
)
9784 pf
->lan_vsi
= v_idx
;
9785 else if (type
== I40E_VSI_SRIOV
)
9786 vsi
->vf_id
= param1
;
9787 /* assign it some queues */
9788 ret
= i40e_get_lump(pf
, pf
->qp_pile
, vsi
->alloc_queue_pairs
,
9791 dev_info(&pf
->pdev
->dev
,
9792 "failed to get tracking for %d queues for VSI %d err=%d\n",
9793 vsi
->alloc_queue_pairs
, vsi
->seid
, ret
);
9796 vsi
->base_queue
= ret
;
9798 /* get a VSI from the hardware */
9799 vsi
->uplink_seid
= uplink_seid
;
9800 ret
= i40e_add_vsi(vsi
);
9804 switch (vsi
->type
) {
9805 /* setup the netdev if needed */
9807 /* Apply relevant filters if a platform-specific mac
9808 * address was selected.
9810 if (!!(pf
->flags
& I40E_FLAG_PF_MAC
)) {
9811 ret
= i40e_macaddr_init(vsi
, pf
->hw
.mac
.addr
);
9813 dev_warn(&pf
->pdev
->dev
,
9814 "could not set up macaddr; err %d\n",
9818 case I40E_VSI_VMDQ2
:
9820 ret
= i40e_config_netdev(vsi
);
9823 ret
= register_netdev(vsi
->netdev
);
9826 vsi
->netdev_registered
= true;
9827 netif_carrier_off(vsi
->netdev
);
9828 #ifdef CONFIG_I40E_DCB
9829 /* Setup DCB netlink interface */
9830 i40e_dcbnl_setup(vsi
);
9831 #endif /* CONFIG_I40E_DCB */
9835 /* set up vectors and rings if needed */
9836 ret
= i40e_vsi_setup_vectors(vsi
);
9840 ret
= i40e_alloc_rings(vsi
);
9844 /* map all of the rings to the q_vectors */
9845 i40e_vsi_map_rings_to_vectors(vsi
);
9847 i40e_vsi_reset_stats(vsi
);
9851 /* no netdev or rings for the other VSI types */
9855 if ((pf
->flags
& I40E_FLAG_RSS_AQ_CAPABLE
) &&
9856 (vsi
->type
== I40E_VSI_VMDQ2
)) {
9857 ret
= i40e_vsi_config_rss(vsi
);
9862 i40e_vsi_free_q_vectors(vsi
);
9864 if (vsi
->netdev_registered
) {
9865 vsi
->netdev_registered
= false;
9866 unregister_netdev(vsi
->netdev
);
9867 free_netdev(vsi
->netdev
);
9871 i40e_aq_delete_element(&pf
->hw
, vsi
->seid
, NULL
);
9873 i40e_vsi_clear(vsi
);
9879 * i40e_veb_get_bw_info - Query VEB BW information
9880 * @veb: the veb to query
9882 * Query the Tx scheduler BW configuration data for given VEB
9884 static int i40e_veb_get_bw_info(struct i40e_veb
*veb
)
9886 struct i40e_aqc_query_switching_comp_ets_config_resp ets_data
;
9887 struct i40e_aqc_query_switching_comp_bw_config_resp bw_data
;
9888 struct i40e_pf
*pf
= veb
->pf
;
9889 struct i40e_hw
*hw
= &pf
->hw
;
9894 ret
= i40e_aq_query_switch_comp_bw_config(hw
, veb
->seid
,
9897 dev_info(&pf
->pdev
->dev
,
9898 "query veb bw config failed, err %s aq_err %s\n",
9899 i40e_stat_str(&pf
->hw
, ret
),
9900 i40e_aq_str(&pf
->hw
, hw
->aq
.asq_last_status
));
9904 ret
= i40e_aq_query_switch_comp_ets_config(hw
, veb
->seid
,
9907 dev_info(&pf
->pdev
->dev
,
9908 "query veb bw ets config failed, err %s aq_err %s\n",
9909 i40e_stat_str(&pf
->hw
, ret
),
9910 i40e_aq_str(&pf
->hw
, hw
->aq
.asq_last_status
));
9914 veb
->bw_limit
= le16_to_cpu(ets_data
.port_bw_limit
);
9915 veb
->bw_max_quanta
= ets_data
.tc_bw_max
;
9916 veb
->is_abs_credits
= bw_data
.absolute_credits_enable
;
9917 veb
->enabled_tc
= ets_data
.tc_valid_bits
;
9918 tc_bw_max
= le16_to_cpu(bw_data
.tc_bw_max
[0]) |
9919 (le16_to_cpu(bw_data
.tc_bw_max
[1]) << 16);
9920 for (i
= 0; i
< I40E_MAX_TRAFFIC_CLASS
; i
++) {
9921 veb
->bw_tc_share_credits
[i
] = bw_data
.tc_bw_share_credits
[i
];
9922 veb
->bw_tc_limit_credits
[i
] =
9923 le16_to_cpu(bw_data
.tc_bw_limits
[i
]);
9924 veb
->bw_tc_max_quanta
[i
] = ((tc_bw_max
>> (i
*4)) & 0x7);
9932 * i40e_veb_mem_alloc - Allocates the next available struct veb in the PF
9933 * @pf: board private structure
9935 * On error: returns error code (negative)
9936 * On success: returns vsi index in PF (positive)
9938 static int i40e_veb_mem_alloc(struct i40e_pf
*pf
)
9941 struct i40e_veb
*veb
;
9944 /* Need to protect the allocation of switch elements at the PF level */
9945 mutex_lock(&pf
->switch_mutex
);
9947 /* VEB list may be fragmented if VEB creation/destruction has
9948 * been happening. We can afford to do a quick scan to look
9949 * for any free slots in the list.
9951 * find next empty veb slot, looping back around if necessary
9954 while ((i
< I40E_MAX_VEB
) && (pf
->veb
[i
] != NULL
))
9956 if (i
>= I40E_MAX_VEB
) {
9958 goto err_alloc_veb
; /* out of VEB slots! */
9961 veb
= kzalloc(sizeof(*veb
), GFP_KERNEL
);
9968 veb
->enabled_tc
= 1;
9973 mutex_unlock(&pf
->switch_mutex
);
9978 * i40e_switch_branch_release - Delete a branch of the switch tree
9979 * @branch: where to start deleting
9981 * This uses recursion to find the tips of the branch to be
9982 * removed, deleting until we get back to and can delete this VEB.
9984 static void i40e_switch_branch_release(struct i40e_veb
*branch
)
9986 struct i40e_pf
*pf
= branch
->pf
;
9987 u16 branch_seid
= branch
->seid
;
9988 u16 veb_idx
= branch
->idx
;
9991 /* release any VEBs on this VEB - RECURSION */
9992 for (i
= 0; i
< I40E_MAX_VEB
; i
++) {
9995 if (pf
->veb
[i
]->uplink_seid
== branch
->seid
)
9996 i40e_switch_branch_release(pf
->veb
[i
]);
9999 /* Release the VSIs on this VEB, but not the owner VSI.
10001 * NOTE: Removing the last VSI on a VEB has the SIDE EFFECT of removing
10002 * the VEB itself, so don't use (*branch) after this loop.
10004 for (i
= 0; i
< pf
->num_alloc_vsi
; i
++) {
10007 if (pf
->vsi
[i
]->uplink_seid
== branch_seid
&&
10008 (pf
->vsi
[i
]->flags
& I40E_VSI_FLAG_VEB_OWNER
) == 0) {
10009 i40e_vsi_release(pf
->vsi
[i
]);
10013 /* There's one corner case where the VEB might not have been
10014 * removed, so double check it here and remove it if needed.
10015 * This case happens if the veb was created from the debugfs
10016 * commands and no VSIs were added to it.
10018 if (pf
->veb
[veb_idx
])
10019 i40e_veb_release(pf
->veb
[veb_idx
]);
10023 * i40e_veb_clear - remove veb struct
10024 * @veb: the veb to remove
10026 static void i40e_veb_clear(struct i40e_veb
*veb
)
10032 struct i40e_pf
*pf
= veb
->pf
;
10034 mutex_lock(&pf
->switch_mutex
);
10035 if (pf
->veb
[veb
->idx
] == veb
)
10036 pf
->veb
[veb
->idx
] = NULL
;
10037 mutex_unlock(&pf
->switch_mutex
);
10044 * i40e_veb_release - Delete a VEB and free its resources
10045 * @veb: the VEB being removed
10047 void i40e_veb_release(struct i40e_veb
*veb
)
10049 struct i40e_vsi
*vsi
= NULL
;
10050 struct i40e_pf
*pf
;
10055 /* find the remaining VSI and check for extras */
10056 for (i
= 0; i
< pf
->num_alloc_vsi
; i
++) {
10057 if (pf
->vsi
[i
] && pf
->vsi
[i
]->uplink_seid
== veb
->seid
) {
10063 dev_info(&pf
->pdev
->dev
,
10064 "can't remove VEB %d with %d VSIs left\n",
10069 /* move the remaining VSI to uplink veb */
10070 vsi
->flags
&= ~I40E_VSI_FLAG_VEB_OWNER
;
10071 if (veb
->uplink_seid
) {
10072 vsi
->uplink_seid
= veb
->uplink_seid
;
10073 if (veb
->uplink_seid
== pf
->mac_seid
)
10074 vsi
->veb_idx
= I40E_NO_VEB
;
10076 vsi
->veb_idx
= veb
->veb_idx
;
10079 vsi
->uplink_seid
= pf
->vsi
[pf
->lan_vsi
]->uplink_seid
;
10080 vsi
->veb_idx
= pf
->vsi
[pf
->lan_vsi
]->veb_idx
;
10083 i40e_aq_delete_element(&pf
->hw
, veb
->seid
, NULL
);
10084 i40e_veb_clear(veb
);
10088 * i40e_add_veb - create the VEB in the switch
10089 * @veb: the VEB to be instantiated
10090 * @vsi: the controlling VSI
10092 static int i40e_add_veb(struct i40e_veb
*veb
, struct i40e_vsi
*vsi
)
10094 struct i40e_pf
*pf
= veb
->pf
;
10095 bool enable_stats
= !!(pf
->flags
& I40E_FLAG_VEB_STATS_ENABLED
);
10098 ret
= i40e_aq_add_veb(&pf
->hw
, veb
->uplink_seid
, vsi
->seid
,
10099 veb
->enabled_tc
, false,
10100 &veb
->seid
, enable_stats
, NULL
);
10102 /* get a VEB from the hardware */
10104 dev_info(&pf
->pdev
->dev
,
10105 "couldn't add VEB, err %s aq_err %s\n",
10106 i40e_stat_str(&pf
->hw
, ret
),
10107 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
10111 /* get statistics counter */
10112 ret
= i40e_aq_get_veb_parameters(&pf
->hw
, veb
->seid
, NULL
, NULL
,
10113 &veb
->stats_idx
, NULL
, NULL
, NULL
);
10115 dev_info(&pf
->pdev
->dev
,
10116 "couldn't get VEB statistics idx, err %s aq_err %s\n",
10117 i40e_stat_str(&pf
->hw
, ret
),
10118 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
10121 ret
= i40e_veb_get_bw_info(veb
);
10123 dev_info(&pf
->pdev
->dev
,
10124 "couldn't get VEB bw info, err %s aq_err %s\n",
10125 i40e_stat_str(&pf
->hw
, ret
),
10126 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
10127 i40e_aq_delete_element(&pf
->hw
, veb
->seid
, NULL
);
10131 vsi
->uplink_seid
= veb
->seid
;
10132 vsi
->veb_idx
= veb
->idx
;
10133 vsi
->flags
|= I40E_VSI_FLAG_VEB_OWNER
;
10139 * i40e_veb_setup - Set up a VEB
10140 * @pf: board private structure
10141 * @flags: VEB setup flags
10142 * @uplink_seid: the switch element to link to
10143 * @vsi_seid: the initial VSI seid
10144 * @enabled_tc: Enabled TC bit-map
10146 * This allocates the sw VEB structure and links it into the switch
10147 * It is possible and legal for this to be a duplicate of an already
10148 * existing VEB. It is also possible for both uplink and vsi seids
10149 * to be zero, in order to create a floating VEB.
10151 * Returns pointer to the successfully allocated VEB sw struct on
10152 * success, otherwise returns NULL on failure.
10154 struct i40e_veb
*i40e_veb_setup(struct i40e_pf
*pf
, u16 flags
,
10155 u16 uplink_seid
, u16 vsi_seid
,
10158 struct i40e_veb
*veb
, *uplink_veb
= NULL
;
10159 int vsi_idx
, veb_idx
;
10162 /* if one seid is 0, the other must be 0 to create a floating relay */
10163 if ((uplink_seid
== 0 || vsi_seid
== 0) &&
10164 (uplink_seid
+ vsi_seid
!= 0)) {
10165 dev_info(&pf
->pdev
->dev
,
10166 "one, not both seid's are 0: uplink=%d vsi=%d\n",
10167 uplink_seid
, vsi_seid
);
10171 /* make sure there is such a vsi and uplink */
10172 for (vsi_idx
= 0; vsi_idx
< pf
->num_alloc_vsi
; vsi_idx
++)
10173 if (pf
->vsi
[vsi_idx
] && pf
->vsi
[vsi_idx
]->seid
== vsi_seid
)
10175 if (vsi_idx
>= pf
->num_alloc_vsi
&& vsi_seid
!= 0) {
10176 dev_info(&pf
->pdev
->dev
, "vsi seid %d not found\n",
10181 if (uplink_seid
&& uplink_seid
!= pf
->mac_seid
) {
10182 for (veb_idx
= 0; veb_idx
< I40E_MAX_VEB
; veb_idx
++) {
10183 if (pf
->veb
[veb_idx
] &&
10184 pf
->veb
[veb_idx
]->seid
== uplink_seid
) {
10185 uplink_veb
= pf
->veb
[veb_idx
];
10190 dev_info(&pf
->pdev
->dev
,
10191 "uplink seid %d not found\n", uplink_seid
);
10196 /* get veb sw struct */
10197 veb_idx
= i40e_veb_mem_alloc(pf
);
10200 veb
= pf
->veb
[veb_idx
];
10201 veb
->flags
= flags
;
10202 veb
->uplink_seid
= uplink_seid
;
10203 veb
->veb_idx
= (uplink_veb
? uplink_veb
->idx
: I40E_NO_VEB
);
10204 veb
->enabled_tc
= (enabled_tc
? enabled_tc
: 0x1);
10206 /* create the VEB in the switch */
10207 ret
= i40e_add_veb(veb
, pf
->vsi
[vsi_idx
]);
10210 if (vsi_idx
== pf
->lan_vsi
)
10211 pf
->lan_veb
= veb
->idx
;
10216 i40e_veb_clear(veb
);
10222 * i40e_setup_pf_switch_element - set PF vars based on switch type
10223 * @pf: board private structure
10224 * @ele: element we are building info from
10225 * @num_reported: total number of elements
10226 * @printconfig: should we print the contents
10228 * helper function to assist in extracting a few useful SEID values.
10230 static void i40e_setup_pf_switch_element(struct i40e_pf
*pf
,
10231 struct i40e_aqc_switch_config_element_resp
*ele
,
10232 u16 num_reported
, bool printconfig
)
10234 u16 downlink_seid
= le16_to_cpu(ele
->downlink_seid
);
10235 u16 uplink_seid
= le16_to_cpu(ele
->uplink_seid
);
10236 u8 element_type
= ele
->element_type
;
10237 u16 seid
= le16_to_cpu(ele
->seid
);
10240 dev_info(&pf
->pdev
->dev
,
10241 "type=%d seid=%d uplink=%d downlink=%d\n",
10242 element_type
, seid
, uplink_seid
, downlink_seid
);
10244 switch (element_type
) {
10245 case I40E_SWITCH_ELEMENT_TYPE_MAC
:
10246 pf
->mac_seid
= seid
;
10248 case I40E_SWITCH_ELEMENT_TYPE_VEB
:
10250 if (uplink_seid
!= pf
->mac_seid
)
10252 if (pf
->lan_veb
== I40E_NO_VEB
) {
10255 /* find existing or else empty VEB */
10256 for (v
= 0; v
< I40E_MAX_VEB
; v
++) {
10257 if (pf
->veb
[v
] && (pf
->veb
[v
]->seid
== seid
)) {
10262 if (pf
->lan_veb
== I40E_NO_VEB
) {
10263 v
= i40e_veb_mem_alloc(pf
);
10270 pf
->veb
[pf
->lan_veb
]->seid
= seid
;
10271 pf
->veb
[pf
->lan_veb
]->uplink_seid
= pf
->mac_seid
;
10272 pf
->veb
[pf
->lan_veb
]->pf
= pf
;
10273 pf
->veb
[pf
->lan_veb
]->veb_idx
= I40E_NO_VEB
;
10275 case I40E_SWITCH_ELEMENT_TYPE_VSI
:
10276 if (num_reported
!= 1)
10278 /* This is immediately after a reset so we can assume this is
10281 pf
->mac_seid
= uplink_seid
;
10282 pf
->pf_seid
= downlink_seid
;
10283 pf
->main_vsi_seid
= seid
;
10285 dev_info(&pf
->pdev
->dev
,
10286 "pf_seid=%d main_vsi_seid=%d\n",
10287 pf
->pf_seid
, pf
->main_vsi_seid
);
10289 case I40E_SWITCH_ELEMENT_TYPE_PF
:
10290 case I40E_SWITCH_ELEMENT_TYPE_VF
:
10291 case I40E_SWITCH_ELEMENT_TYPE_EMP
:
10292 case I40E_SWITCH_ELEMENT_TYPE_BMC
:
10293 case I40E_SWITCH_ELEMENT_TYPE_PE
:
10294 case I40E_SWITCH_ELEMENT_TYPE_PA
:
10295 /* ignore these for now */
10298 dev_info(&pf
->pdev
->dev
, "unknown element type=%d seid=%d\n",
10299 element_type
, seid
);
10305 * i40e_fetch_switch_configuration - Get switch config from firmware
10306 * @pf: board private structure
10307 * @printconfig: should we print the contents
10309 * Get the current switch configuration from the device and
10310 * extract a few useful SEID values.
10312 int i40e_fetch_switch_configuration(struct i40e_pf
*pf
, bool printconfig
)
10314 struct i40e_aqc_get_switch_config_resp
*sw_config
;
10320 aq_buf
= kzalloc(I40E_AQ_LARGE_BUF
, GFP_KERNEL
);
10324 sw_config
= (struct i40e_aqc_get_switch_config_resp
*)aq_buf
;
10326 u16 num_reported
, num_total
;
10328 ret
= i40e_aq_get_switch_config(&pf
->hw
, sw_config
,
10332 dev_info(&pf
->pdev
->dev
,
10333 "get switch config failed err %s aq_err %s\n",
10334 i40e_stat_str(&pf
->hw
, ret
),
10335 i40e_aq_str(&pf
->hw
,
10336 pf
->hw
.aq
.asq_last_status
));
10341 num_reported
= le16_to_cpu(sw_config
->header
.num_reported
);
10342 num_total
= le16_to_cpu(sw_config
->header
.num_total
);
10345 dev_info(&pf
->pdev
->dev
,
10346 "header: %d reported %d total\n",
10347 num_reported
, num_total
);
10349 for (i
= 0; i
< num_reported
; i
++) {
10350 struct i40e_aqc_switch_config_element_resp
*ele
=
10351 &sw_config
->element
[i
];
10353 i40e_setup_pf_switch_element(pf
, ele
, num_reported
,
10356 } while (next_seid
!= 0);
10363 * i40e_setup_pf_switch - Setup the HW switch on startup or after reset
10364 * @pf: board private structure
10365 * @reinit: if the Main VSI needs to re-initialized.
10367 * Returns 0 on success, negative value on failure
10369 static int i40e_setup_pf_switch(struct i40e_pf
*pf
, bool reinit
)
10374 /* find out what's out there already */
10375 ret
= i40e_fetch_switch_configuration(pf
, false);
10377 dev_info(&pf
->pdev
->dev
,
10378 "couldn't fetch switch config, err %s aq_err %s\n",
10379 i40e_stat_str(&pf
->hw
, ret
),
10380 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
10383 i40e_pf_reset_stats(pf
);
10385 /* set the switch config bit for the whole device to
10386 * support limited promisc or true promisc
10387 * when user requests promisc. The default is limited
10391 if ((pf
->hw
.pf_id
== 0) &&
10392 !(pf
->flags
& I40E_FLAG_TRUE_PROMISC_SUPPORT
))
10393 flags
= I40E_AQ_SET_SWITCH_CFG_PROMISC
;
10395 if (pf
->hw
.pf_id
== 0) {
10398 valid_flags
= I40E_AQ_SET_SWITCH_CFG_PROMISC
;
10399 ret
= i40e_aq_set_switch_config(&pf
->hw
, flags
, valid_flags
,
10401 if (ret
&& pf
->hw
.aq
.asq_last_status
!= I40E_AQ_RC_ESRCH
) {
10402 dev_info(&pf
->pdev
->dev
,
10403 "couldn't set switch config bits, err %s aq_err %s\n",
10404 i40e_stat_str(&pf
->hw
, ret
),
10405 i40e_aq_str(&pf
->hw
,
10406 pf
->hw
.aq
.asq_last_status
));
10407 /* not a fatal problem, just keep going */
10411 /* first time setup */
10412 if (pf
->lan_vsi
== I40E_NO_VSI
|| reinit
) {
10413 struct i40e_vsi
*vsi
= NULL
;
10416 /* Set up the PF VSI associated with the PF's main VSI
10417 * that is already in the HW switch
10419 if (pf
->lan_veb
!= I40E_NO_VEB
&& pf
->veb
[pf
->lan_veb
])
10420 uplink_seid
= pf
->veb
[pf
->lan_veb
]->seid
;
10422 uplink_seid
= pf
->mac_seid
;
10423 if (pf
->lan_vsi
== I40E_NO_VSI
)
10424 vsi
= i40e_vsi_setup(pf
, I40E_VSI_MAIN
, uplink_seid
, 0);
10426 vsi
= i40e_vsi_reinit_setup(pf
->vsi
[pf
->lan_vsi
]);
10428 dev_info(&pf
->pdev
->dev
, "setup of MAIN VSI failed\n");
10429 i40e_fdir_teardown(pf
);
10433 /* force a reset of TC and queue layout configurations */
10434 u8 enabled_tc
= pf
->vsi
[pf
->lan_vsi
]->tc_config
.enabled_tc
;
10436 pf
->vsi
[pf
->lan_vsi
]->tc_config
.enabled_tc
= 0;
10437 pf
->vsi
[pf
->lan_vsi
]->seid
= pf
->main_vsi_seid
;
10438 i40e_vsi_config_tc(pf
->vsi
[pf
->lan_vsi
], enabled_tc
);
10440 i40e_vlan_stripping_disable(pf
->vsi
[pf
->lan_vsi
]);
10442 i40e_fdir_sb_setup(pf
);
10444 /* Setup static PF queue filter control settings */
10445 ret
= i40e_setup_pf_filter_control(pf
);
10447 dev_info(&pf
->pdev
->dev
, "setup_pf_filter_control failed: %d\n",
10449 /* Failure here should not stop continuing other steps */
10452 /* enable RSS in the HW, even for only one queue, as the stack can use
10455 if ((pf
->flags
& I40E_FLAG_RSS_ENABLED
))
10456 i40e_pf_config_rss(pf
);
10458 /* fill in link information and enable LSE reporting */
10459 i40e_update_link_info(&pf
->hw
);
10460 i40e_link_event(pf
);
10462 /* Initialize user-specific link properties */
10463 pf
->fc_autoneg_status
= ((pf
->hw
.phy
.link_info
.an_info
&
10464 I40E_AQ_AN_COMPLETED
) ? true : false);
10472 * i40e_determine_queue_usage - Work out queue distribution
10473 * @pf: board private structure
10475 static void i40e_determine_queue_usage(struct i40e_pf
*pf
)
10479 pf
->num_lan_qps
= 0;
10481 pf
->num_fcoe_qps
= 0;
10484 /* Find the max queues to be put into basic use. We'll always be
10485 * using TC0, whether or not DCB is running, and TC0 will get the
10488 queues_left
= pf
->hw
.func_caps
.num_tx_qp
;
10490 if ((queues_left
== 1) ||
10491 !(pf
->flags
& I40E_FLAG_MSIX_ENABLED
)) {
10492 /* one qp for PF, no queues for anything else */
10494 pf
->alloc_rss_size
= pf
->num_lan_qps
= 1;
10496 /* make sure all the fancies are disabled */
10497 pf
->flags
&= ~(I40E_FLAG_RSS_ENABLED
|
10498 I40E_FLAG_IWARP_ENABLED
|
10500 I40E_FLAG_FCOE_ENABLED
|
10502 I40E_FLAG_FD_SB_ENABLED
|
10503 I40E_FLAG_FD_ATR_ENABLED
|
10504 I40E_FLAG_DCB_CAPABLE
|
10505 I40E_FLAG_SRIOV_ENABLED
|
10506 I40E_FLAG_VMDQ_ENABLED
);
10507 } else if (!(pf
->flags
& (I40E_FLAG_RSS_ENABLED
|
10508 I40E_FLAG_FD_SB_ENABLED
|
10509 I40E_FLAG_FD_ATR_ENABLED
|
10510 I40E_FLAG_DCB_CAPABLE
))) {
10511 /* one qp for PF */
10512 pf
->alloc_rss_size
= pf
->num_lan_qps
= 1;
10513 queues_left
-= pf
->num_lan_qps
;
10515 pf
->flags
&= ~(I40E_FLAG_RSS_ENABLED
|
10516 I40E_FLAG_IWARP_ENABLED
|
10518 I40E_FLAG_FCOE_ENABLED
|
10520 I40E_FLAG_FD_SB_ENABLED
|
10521 I40E_FLAG_FD_ATR_ENABLED
|
10522 I40E_FLAG_DCB_ENABLED
|
10523 I40E_FLAG_VMDQ_ENABLED
);
10525 /* Not enough queues for all TCs */
10526 if ((pf
->flags
& I40E_FLAG_DCB_CAPABLE
) &&
10527 (queues_left
< I40E_MAX_TRAFFIC_CLASS
)) {
10528 pf
->flags
&= ~I40E_FLAG_DCB_CAPABLE
;
10529 dev_info(&pf
->pdev
->dev
, "not enough queues for DCB. DCB is disabled.\n");
10531 pf
->num_lan_qps
= max_t(int, pf
->rss_size_max
,
10532 num_online_cpus());
10533 pf
->num_lan_qps
= min_t(int, pf
->num_lan_qps
,
10534 pf
->hw
.func_caps
.num_tx_qp
);
10536 queues_left
-= pf
->num_lan_qps
;
10540 if (pf
->flags
& I40E_FLAG_FCOE_ENABLED
) {
10541 if (I40E_DEFAULT_FCOE
<= queues_left
) {
10542 pf
->num_fcoe_qps
= I40E_DEFAULT_FCOE
;
10543 } else if (I40E_MINIMUM_FCOE
<= queues_left
) {
10544 pf
->num_fcoe_qps
= I40E_MINIMUM_FCOE
;
10546 pf
->num_fcoe_qps
= 0;
10547 pf
->flags
&= ~I40E_FLAG_FCOE_ENABLED
;
10548 dev_info(&pf
->pdev
->dev
, "not enough queues for FCoE. FCoE feature will be disabled\n");
10551 queues_left
-= pf
->num_fcoe_qps
;
10555 if (pf
->flags
& I40E_FLAG_FD_SB_ENABLED
) {
10556 if (queues_left
> 1) {
10557 queues_left
-= 1; /* save 1 queue for FD */
10559 pf
->flags
&= ~I40E_FLAG_FD_SB_ENABLED
;
10560 dev_info(&pf
->pdev
->dev
, "not enough queues for Flow Director. Flow Director feature is disabled\n");
10564 if ((pf
->flags
& I40E_FLAG_SRIOV_ENABLED
) &&
10565 pf
->num_vf_qps
&& pf
->num_req_vfs
&& queues_left
) {
10566 pf
->num_req_vfs
= min_t(int, pf
->num_req_vfs
,
10567 (queues_left
/ pf
->num_vf_qps
));
10568 queues_left
-= (pf
->num_req_vfs
* pf
->num_vf_qps
);
10571 if ((pf
->flags
& I40E_FLAG_VMDQ_ENABLED
) &&
10572 pf
->num_vmdq_vsis
&& pf
->num_vmdq_qps
&& queues_left
) {
10573 pf
->num_vmdq_vsis
= min_t(int, pf
->num_vmdq_vsis
,
10574 (queues_left
/ pf
->num_vmdq_qps
));
10575 queues_left
-= (pf
->num_vmdq_vsis
* pf
->num_vmdq_qps
);
10578 pf
->queues_left
= queues_left
;
10579 dev_dbg(&pf
->pdev
->dev
,
10580 "qs_avail=%d FD SB=%d lan_qs=%d lan_tc0=%d vf=%d*%d vmdq=%d*%d, remaining=%d\n",
10581 pf
->hw
.func_caps
.num_tx_qp
,
10582 !!(pf
->flags
& I40E_FLAG_FD_SB_ENABLED
),
10583 pf
->num_lan_qps
, pf
->alloc_rss_size
, pf
->num_req_vfs
,
10584 pf
->num_vf_qps
, pf
->num_vmdq_vsis
, pf
->num_vmdq_qps
,
10587 dev_dbg(&pf
->pdev
->dev
, "fcoe queues = %d\n", pf
->num_fcoe_qps
);
10592 * i40e_setup_pf_filter_control - Setup PF static filter control
10593 * @pf: PF to be setup
10595 * i40e_setup_pf_filter_control sets up a PF's initial filter control
10596 * settings. If PE/FCoE are enabled then it will also set the per PF
10597 * based filter sizes required for them. It also enables Flow director,
10598 * ethertype and macvlan type filter settings for the pf.
10600 * Returns 0 on success, negative on failure
10602 static int i40e_setup_pf_filter_control(struct i40e_pf
*pf
)
10604 struct i40e_filter_control_settings
*settings
= &pf
->filter_settings
;
10606 settings
->hash_lut_size
= I40E_HASH_LUT_SIZE_128
;
10608 /* Flow Director is enabled */
10609 if (pf
->flags
& (I40E_FLAG_FD_SB_ENABLED
| I40E_FLAG_FD_ATR_ENABLED
))
10610 settings
->enable_fdir
= true;
10612 /* Ethtype and MACVLAN filters enabled for PF */
10613 settings
->enable_ethtype
= true;
10614 settings
->enable_macvlan
= true;
10616 if (i40e_set_filter_control(&pf
->hw
, settings
))
10622 #define INFO_STRING_LEN 255
10623 #define REMAIN(__x) (INFO_STRING_LEN - (__x))
10624 static void i40e_print_features(struct i40e_pf
*pf
)
10626 struct i40e_hw
*hw
= &pf
->hw
;
10630 buf
= kmalloc(INFO_STRING_LEN
, GFP_KERNEL
);
10634 i
= snprintf(buf
, INFO_STRING_LEN
, "Features: PF-id[%d]", hw
->pf_id
);
10635 #ifdef CONFIG_PCI_IOV
10636 i
+= snprintf(&buf
[i
], REMAIN(i
), " VFs: %d", pf
->num_req_vfs
);
10638 i
+= snprintf(&buf
[i
], REMAIN(i
), " VSIs: %d QP: %d",
10639 pf
->hw
.func_caps
.num_vsis
,
10640 pf
->vsi
[pf
->lan_vsi
]->num_queue_pairs
);
10641 if (pf
->flags
& I40E_FLAG_RSS_ENABLED
)
10642 i
+= snprintf(&buf
[i
], REMAIN(i
), " RSS");
10643 if (pf
->flags
& I40E_FLAG_FD_ATR_ENABLED
)
10644 i
+= snprintf(&buf
[i
], REMAIN(i
), " FD_ATR");
10645 if (pf
->flags
& I40E_FLAG_FD_SB_ENABLED
) {
10646 i
+= snprintf(&buf
[i
], REMAIN(i
), " FD_SB");
10647 i
+= snprintf(&buf
[i
], REMAIN(i
), " NTUPLE");
10649 if (pf
->flags
& I40E_FLAG_DCB_CAPABLE
)
10650 i
+= snprintf(&buf
[i
], REMAIN(i
), " DCB");
10651 i
+= snprintf(&buf
[i
], REMAIN(i
), " VxLAN");
10652 i
+= snprintf(&buf
[i
], REMAIN(i
), " Geneve");
10653 if (pf
->flags
& I40E_FLAG_PTP
)
10654 i
+= snprintf(&buf
[i
], REMAIN(i
), " PTP");
10656 if (pf
->flags
& I40E_FLAG_FCOE_ENABLED
)
10657 i
+= snprintf(&buf
[i
], REMAIN(i
), " FCOE");
10659 if (pf
->flags
& I40E_FLAG_VEB_MODE_ENABLED
)
10660 i
+= snprintf(&buf
[i
], REMAIN(i
), " VEB");
10662 i
+= snprintf(&buf
[i
], REMAIN(i
), " VEPA");
10664 dev_info(&pf
->pdev
->dev
, "%s\n", buf
);
10666 WARN_ON(i
> INFO_STRING_LEN
);
10670 * i40e_get_platform_mac_addr - get platform-specific MAC address
10672 * @pdev: PCI device information struct
10673 * @pf: board private structure
10675 * Look up the MAC address in Open Firmware on systems that support it,
10676 * and use IDPROM on SPARC if no OF address is found. On return, the
10677 * I40E_FLAG_PF_MAC will be wset in pf->flags if a platform-specific value
10678 * has been selected.
10680 static void i40e_get_platform_mac_addr(struct pci_dev
*pdev
, struct i40e_pf
*pf
)
10682 pf
->flags
&= ~I40E_FLAG_PF_MAC
;
10683 if (!eth_platform_get_mac_address(&pdev
->dev
, pf
->hw
.mac
.addr
))
10684 pf
->flags
|= I40E_FLAG_PF_MAC
;
10688 * i40e_probe - Device initialization routine
10689 * @pdev: PCI device information struct
10690 * @ent: entry in i40e_pci_tbl
10692 * i40e_probe initializes a PF identified by a pci_dev structure.
10693 * The OS initialization, configuring of the PF private structure,
10694 * and a hardware reset occur.
10696 * Returns 0 on success, negative on failure
10698 static int i40e_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
10700 struct i40e_aq_get_phy_abilities_resp abilities
;
10701 struct i40e_pf
*pf
;
10702 struct i40e_hw
*hw
;
10703 static u16 pfs_found
;
10711 err
= pci_enable_device_mem(pdev
);
10715 /* set up for high or low dma */
10716 err
= dma_set_mask_and_coherent(&pdev
->dev
, DMA_BIT_MASK(64));
10718 err
= dma_set_mask_and_coherent(&pdev
->dev
, DMA_BIT_MASK(32));
10720 dev_err(&pdev
->dev
,
10721 "DMA configuration failed: 0x%x\n", err
);
10726 /* set up pci connections */
10727 err
= pci_request_mem_regions(pdev
, i40e_driver_name
);
10729 dev_info(&pdev
->dev
,
10730 "pci_request_selected_regions failed %d\n", err
);
10734 pci_enable_pcie_error_reporting(pdev
);
10735 pci_set_master(pdev
);
10737 /* Now that we have a PCI connection, we need to do the
10738 * low level device setup. This is primarily setting up
10739 * the Admin Queue structures and then querying for the
10740 * device's current profile information.
10742 pf
= kzalloc(sizeof(*pf
), GFP_KERNEL
);
10749 set_bit(__I40E_DOWN
, &pf
->state
);
10754 pf
->ioremap_len
= min_t(int, pci_resource_len(pdev
, 0),
10755 I40E_MAX_CSR_SPACE
);
10757 hw
->hw_addr
= ioremap(pci_resource_start(pdev
, 0), pf
->ioremap_len
);
10758 if (!hw
->hw_addr
) {
10760 dev_info(&pdev
->dev
, "ioremap(0x%04x, 0x%04x) failed: 0x%x\n",
10761 (unsigned int)pci_resource_start(pdev
, 0),
10762 pf
->ioremap_len
, err
);
10765 hw
->vendor_id
= pdev
->vendor
;
10766 hw
->device_id
= pdev
->device
;
10767 pci_read_config_byte(pdev
, PCI_REVISION_ID
, &hw
->revision_id
);
10768 hw
->subsystem_vendor_id
= pdev
->subsystem_vendor
;
10769 hw
->subsystem_device_id
= pdev
->subsystem_device
;
10770 hw
->bus
.device
= PCI_SLOT(pdev
->devfn
);
10771 hw
->bus
.func
= PCI_FUNC(pdev
->devfn
);
10772 pf
->instance
= pfs_found
;
10774 /* set up the locks for the AQ, do this only once in probe
10775 * and destroy them only once in remove
10777 mutex_init(&hw
->aq
.asq_mutex
);
10778 mutex_init(&hw
->aq
.arq_mutex
);
10781 pf
->msg_enable
= pf
->hw
.debug_mask
;
10782 pf
->msg_enable
= debug
;
10785 /* do a special CORER for clearing PXE mode once at init */
10786 if (hw
->revision_id
== 0 &&
10787 (rd32(hw
, I40E_GLLAN_RCTL_0
) & I40E_GLLAN_RCTL_0_PXE_MODE_MASK
)) {
10788 wr32(hw
, I40E_GLGEN_RTRIG
, I40E_GLGEN_RTRIG_CORER_MASK
);
10793 i40e_clear_pxe_mode(hw
);
10796 /* Reset here to make sure all is clean and to define PF 'n' */
10798 err
= i40e_pf_reset(hw
);
10800 dev_info(&pdev
->dev
, "Initial pf_reset failed: %d\n", err
);
10805 hw
->aq
.num_arq_entries
= I40E_AQ_LEN
;
10806 hw
->aq
.num_asq_entries
= I40E_AQ_LEN
;
10807 hw
->aq
.arq_buf_size
= I40E_MAX_AQ_BUF_SIZE
;
10808 hw
->aq
.asq_buf_size
= I40E_MAX_AQ_BUF_SIZE
;
10809 pf
->adminq_work_limit
= I40E_AQ_WORK_LIMIT
;
10811 snprintf(pf
->int_name
, sizeof(pf
->int_name
) - 1,
10813 dev_driver_string(&pf
->pdev
->dev
), dev_name(&pdev
->dev
));
10815 err
= i40e_init_shared_code(hw
);
10817 dev_warn(&pdev
->dev
, "unidentified MAC or BLANK NVM: %d\n",
10822 /* set up a default setting for link flow control */
10823 pf
->hw
.fc
.requested_mode
= I40E_FC_NONE
;
10825 err
= i40e_init_adminq(hw
);
10827 if (err
== I40E_ERR_FIRMWARE_API_VERSION
)
10828 dev_info(&pdev
->dev
,
10829 "The driver for the device stopped because the NVM image is newer than expected. You must install the most recent version of the network driver.\n");
10831 dev_info(&pdev
->dev
,
10832 "The driver for the device stopped because the device firmware failed to init. Try updating your NVM image.\n");
10837 /* provide nvm, fw, api versions */
10838 dev_info(&pdev
->dev
, "fw %d.%d.%05d api %d.%d nvm %s\n",
10839 hw
->aq
.fw_maj_ver
, hw
->aq
.fw_min_ver
, hw
->aq
.fw_build
,
10840 hw
->aq
.api_maj_ver
, hw
->aq
.api_min_ver
,
10841 i40e_nvm_version_str(hw
));
10843 if (hw
->aq
.api_maj_ver
== I40E_FW_API_VERSION_MAJOR
&&
10844 hw
->aq
.api_min_ver
> I40E_FW_API_VERSION_MINOR
)
10845 dev_info(&pdev
->dev
,
10846 "The driver for the device detected a newer version of the NVM image than expected. Please install the most recent version of the network driver.\n");
10847 else if (hw
->aq
.api_maj_ver
< I40E_FW_API_VERSION_MAJOR
||
10848 hw
->aq
.api_min_ver
< (I40E_FW_API_VERSION_MINOR
- 1))
10849 dev_info(&pdev
->dev
,
10850 "The driver for the device detected an older version of the NVM image than expected. Please update the NVM image.\n");
10852 i40e_verify_eeprom(pf
);
10854 /* Rev 0 hardware was never productized */
10855 if (hw
->revision_id
< 1)
10856 dev_warn(&pdev
->dev
, "This device is a pre-production adapter/LOM. Please be aware there may be issues with your hardware. If you are experiencing problems please contact your Intel or hardware representative who provided you with this hardware.\n");
10858 i40e_clear_pxe_mode(hw
);
10859 err
= i40e_get_capabilities(pf
);
10861 goto err_adminq_setup
;
10863 err
= i40e_sw_init(pf
);
10865 dev_info(&pdev
->dev
, "sw_init failed: %d\n", err
);
10869 err
= i40e_init_lan_hmc(hw
, hw
->func_caps
.num_tx_qp
,
10870 hw
->func_caps
.num_rx_qp
,
10871 pf
->fcoe_hmc_cntx_num
, pf
->fcoe_hmc_filt_num
);
10873 dev_info(&pdev
->dev
, "init_lan_hmc failed: %d\n", err
);
10874 goto err_init_lan_hmc
;
10877 err
= i40e_configure_lan_hmc(hw
, I40E_HMC_MODEL_DIRECT_ONLY
);
10879 dev_info(&pdev
->dev
, "configure_lan_hmc failed: %d\n", err
);
10881 goto err_configure_lan_hmc
;
10884 /* Disable LLDP for NICs that have firmware versions lower than v4.3.
10885 * Ignore error return codes because if it was already disabled via
10886 * hardware settings this will fail
10888 if (pf
->flags
& I40E_FLAG_STOP_FW_LLDP
) {
10889 dev_info(&pdev
->dev
, "Stopping firmware LLDP agent.\n");
10890 i40e_aq_stop_lldp(hw
, true, NULL
);
10893 i40e_get_mac_addr(hw
, hw
->mac
.addr
);
10894 /* allow a platform config to override the HW addr */
10895 i40e_get_platform_mac_addr(pdev
, pf
);
10896 if (!is_valid_ether_addr(hw
->mac
.addr
)) {
10897 dev_info(&pdev
->dev
, "invalid MAC address %pM\n", hw
->mac
.addr
);
10901 dev_info(&pdev
->dev
, "MAC address: %pM\n", hw
->mac
.addr
);
10902 ether_addr_copy(hw
->mac
.perm_addr
, hw
->mac
.addr
);
10903 i40e_get_port_mac_addr(hw
, hw
->mac
.port_addr
);
10904 if (is_valid_ether_addr(hw
->mac
.port_addr
))
10905 pf
->flags
|= I40E_FLAG_PORT_ID_VALID
;
10907 err
= i40e_get_san_mac_addr(hw
, hw
->mac
.san_addr
);
10909 dev_info(&pdev
->dev
,
10910 "(non-fatal) SAN MAC retrieval failed: %d\n", err
);
10911 if (!is_valid_ether_addr(hw
->mac
.san_addr
)) {
10912 dev_warn(&pdev
->dev
, "invalid SAN MAC address %pM, falling back to LAN MAC\n",
10914 ether_addr_copy(hw
->mac
.san_addr
, hw
->mac
.addr
);
10916 dev_info(&pf
->pdev
->dev
, "SAN MAC: %pM\n", hw
->mac
.san_addr
);
10917 #endif /* I40E_FCOE */
10919 pci_set_drvdata(pdev
, pf
);
10920 pci_save_state(pdev
);
10921 #ifdef CONFIG_I40E_DCB
10922 err
= i40e_init_pf_dcb(pf
);
10924 dev_info(&pdev
->dev
, "DCB init failed %d, disabled\n", err
);
10925 pf
->flags
&= ~I40E_FLAG_DCB_CAPABLE
;
10926 /* Continue without DCB enabled */
10928 #endif /* CONFIG_I40E_DCB */
10930 /* set up periodic task facility */
10931 setup_timer(&pf
->service_timer
, i40e_service_timer
, (unsigned long)pf
);
10932 pf
->service_timer_period
= HZ
;
10934 INIT_WORK(&pf
->service_task
, i40e_service_task
);
10935 clear_bit(__I40E_SERVICE_SCHED
, &pf
->state
);
10936 pf
->flags
|= I40E_FLAG_NEED_LINK_UPDATE
;
10938 /* NVM bit on means WoL disabled for the port */
10939 i40e_read_nvm_word(hw
, I40E_SR_NVM_WAKE_ON_LAN
, &wol_nvm_bits
);
10940 if (BIT (hw
->port
) & wol_nvm_bits
|| hw
->partition_id
!= 1)
10941 pf
->wol_en
= false;
10944 device_set_wakeup_enable(&pf
->pdev
->dev
, pf
->wol_en
);
10946 /* set up the main switch operations */
10947 i40e_determine_queue_usage(pf
);
10948 err
= i40e_init_interrupt_scheme(pf
);
10950 goto err_switch_setup
;
10952 /* The number of VSIs reported by the FW is the minimum guaranteed
10953 * to us; HW supports far more and we share the remaining pool with
10954 * the other PFs. We allocate space for more than the guarantee with
10955 * the understanding that we might not get them all later.
10957 if (pf
->hw
.func_caps
.num_vsis
< I40E_MIN_VSI_ALLOC
)
10958 pf
->num_alloc_vsi
= I40E_MIN_VSI_ALLOC
;
10960 pf
->num_alloc_vsi
= pf
->hw
.func_caps
.num_vsis
;
10962 /* Set up the *vsi struct and our local tracking of the MAIN PF vsi. */
10963 pf
->vsi
= kcalloc(pf
->num_alloc_vsi
, sizeof(struct i40e_vsi
*),
10967 goto err_switch_setup
;
10970 #ifdef CONFIG_PCI_IOV
10971 /* prep for VF support */
10972 if ((pf
->flags
& I40E_FLAG_SRIOV_ENABLED
) &&
10973 (pf
->flags
& I40E_FLAG_MSIX_ENABLED
) &&
10974 !test_bit(__I40E_BAD_EEPROM
, &pf
->state
)) {
10975 if (pci_num_vf(pdev
))
10976 pf
->flags
|= I40E_FLAG_VEB_MODE_ENABLED
;
10979 err
= i40e_setup_pf_switch(pf
, false);
10981 dev_info(&pdev
->dev
, "setup_pf_switch failed: %d\n", err
);
10985 /* Make sure flow control is set according to current settings */
10986 err
= i40e_set_fc(hw
, &set_fc_aq_fail
, true);
10987 if (set_fc_aq_fail
& I40E_SET_FC_AQ_FAIL_GET
)
10988 dev_dbg(&pf
->pdev
->dev
,
10989 "Set fc with err %s aq_err %s on get_phy_cap\n",
10990 i40e_stat_str(hw
, err
),
10991 i40e_aq_str(hw
, hw
->aq
.asq_last_status
));
10992 if (set_fc_aq_fail
& I40E_SET_FC_AQ_FAIL_SET
)
10993 dev_dbg(&pf
->pdev
->dev
,
10994 "Set fc with err %s aq_err %s on set_phy_config\n",
10995 i40e_stat_str(hw
, err
),
10996 i40e_aq_str(hw
, hw
->aq
.asq_last_status
));
10997 if (set_fc_aq_fail
& I40E_SET_FC_AQ_FAIL_UPDATE
)
10998 dev_dbg(&pf
->pdev
->dev
,
10999 "Set fc with err %s aq_err %s on get_link_info\n",
11000 i40e_stat_str(hw
, err
),
11001 i40e_aq_str(hw
, hw
->aq
.asq_last_status
));
11003 /* if FDIR VSI was set up, start it now */
11004 for (i
= 0; i
< pf
->num_alloc_vsi
; i
++) {
11005 if (pf
->vsi
[i
] && pf
->vsi
[i
]->type
== I40E_VSI_FDIR
) {
11006 i40e_vsi_open(pf
->vsi
[i
]);
11011 /* The driver only wants link up/down and module qualification
11012 * reports from firmware. Note the negative logic.
11014 err
= i40e_aq_set_phy_int_mask(&pf
->hw
,
11015 ~(I40E_AQ_EVENT_LINK_UPDOWN
|
11016 I40E_AQ_EVENT_MEDIA_NA
|
11017 I40E_AQ_EVENT_MODULE_QUAL_FAIL
), NULL
);
11019 dev_info(&pf
->pdev
->dev
, "set phy mask fail, err %s aq_err %s\n",
11020 i40e_stat_str(&pf
->hw
, err
),
11021 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
11023 /* Reconfigure hardware for allowing smaller MSS in the case
11024 * of TSO, so that we avoid the MDD being fired and causing
11025 * a reset in the case of small MSS+TSO.
11027 val
= rd32(hw
, I40E_REG_MSS
);
11028 if ((val
& I40E_REG_MSS_MIN_MASK
) > I40E_64BYTE_MSS
) {
11029 val
&= ~I40E_REG_MSS_MIN_MASK
;
11030 val
|= I40E_64BYTE_MSS
;
11031 wr32(hw
, I40E_REG_MSS
, val
);
11034 if (pf
->flags
& I40E_FLAG_RESTART_AUTONEG
) {
11036 err
= i40e_aq_set_link_restart_an(&pf
->hw
, true, NULL
);
11038 dev_info(&pf
->pdev
->dev
, "link restart failed, err %s aq_err %s\n",
11039 i40e_stat_str(&pf
->hw
, err
),
11040 i40e_aq_str(&pf
->hw
,
11041 pf
->hw
.aq
.asq_last_status
));
11043 /* The main driver is (mostly) up and happy. We need to set this state
11044 * before setting up the misc vector or we get a race and the vector
11045 * ends up disabled forever.
11047 clear_bit(__I40E_DOWN
, &pf
->state
);
11049 /* In case of MSIX we are going to setup the misc vector right here
11050 * to handle admin queue events etc. In case of legacy and MSI
11051 * the misc functionality and queue processing is combined in
11052 * the same vector and that gets setup at open.
11054 if (pf
->flags
& I40E_FLAG_MSIX_ENABLED
) {
11055 err
= i40e_setup_misc_vector(pf
);
11057 dev_info(&pdev
->dev
,
11058 "setup of misc vector failed: %d\n", err
);
11063 #ifdef CONFIG_PCI_IOV
11064 /* prep for VF support */
11065 if ((pf
->flags
& I40E_FLAG_SRIOV_ENABLED
) &&
11066 (pf
->flags
& I40E_FLAG_MSIX_ENABLED
) &&
11067 !test_bit(__I40E_BAD_EEPROM
, &pf
->state
)) {
11068 /* disable link interrupts for VFs */
11069 val
= rd32(hw
, I40E_PFGEN_PORTMDIO_NUM
);
11070 val
&= ~I40E_PFGEN_PORTMDIO_NUM_VFLINK_STAT_ENA_MASK
;
11071 wr32(hw
, I40E_PFGEN_PORTMDIO_NUM
, val
);
11074 if (pci_num_vf(pdev
)) {
11075 dev_info(&pdev
->dev
,
11076 "Active VFs found, allocating resources.\n");
11077 err
= i40e_alloc_vfs(pf
, pci_num_vf(pdev
));
11079 dev_info(&pdev
->dev
,
11080 "Error %d allocating resources for existing VFs\n",
11084 #endif /* CONFIG_PCI_IOV */
11086 if (pf
->flags
& I40E_FLAG_IWARP_ENABLED
) {
11087 pf
->iwarp_base_vector
= i40e_get_lump(pf
, pf
->irq_pile
,
11088 pf
->num_iwarp_msix
,
11089 I40E_IWARP_IRQ_PILE_ID
);
11090 if (pf
->iwarp_base_vector
< 0) {
11091 dev_info(&pdev
->dev
,
11092 "failed to get tracking for %d vectors for IWARP err=%d\n",
11093 pf
->num_iwarp_msix
, pf
->iwarp_base_vector
);
11094 pf
->flags
&= ~I40E_FLAG_IWARP_ENABLED
;
11098 i40e_dbg_pf_init(pf
);
11100 /* tell the firmware that we're starting */
11101 i40e_send_version(pf
);
11103 /* since everything's happy, start the service_task timer */
11104 mod_timer(&pf
->service_timer
,
11105 round_jiffies(jiffies
+ pf
->service_timer_period
));
11107 /* add this PF to client device list and launch a client service task */
11108 err
= i40e_lan_add_device(pf
);
11110 dev_info(&pdev
->dev
, "Failed to add PF to client API service list: %d\n",
11114 /* create FCoE interface */
11115 i40e_fcoe_vsi_setup(pf
);
11118 #define PCI_SPEED_SIZE 8
11119 #define PCI_WIDTH_SIZE 8
11120 /* Devices on the IOSF bus do not have this information
11121 * and will report PCI Gen 1 x 1 by default so don't bother
11124 if (!(pf
->flags
& I40E_FLAG_NO_PCI_LINK_CHECK
)) {
11125 char speed
[PCI_SPEED_SIZE
] = "Unknown";
11126 char width
[PCI_WIDTH_SIZE
] = "Unknown";
11128 /* Get the negotiated link width and speed from PCI config
11131 pcie_capability_read_word(pf
->pdev
, PCI_EXP_LNKSTA
,
11134 i40e_set_pci_config_data(hw
, link_status
);
11136 switch (hw
->bus
.speed
) {
11137 case i40e_bus_speed_8000
:
11138 strncpy(speed
, "8.0", PCI_SPEED_SIZE
); break;
11139 case i40e_bus_speed_5000
:
11140 strncpy(speed
, "5.0", PCI_SPEED_SIZE
); break;
11141 case i40e_bus_speed_2500
:
11142 strncpy(speed
, "2.5", PCI_SPEED_SIZE
); break;
11146 switch (hw
->bus
.width
) {
11147 case i40e_bus_width_pcie_x8
:
11148 strncpy(width
, "8", PCI_WIDTH_SIZE
); break;
11149 case i40e_bus_width_pcie_x4
:
11150 strncpy(width
, "4", PCI_WIDTH_SIZE
); break;
11151 case i40e_bus_width_pcie_x2
:
11152 strncpy(width
, "2", PCI_WIDTH_SIZE
); break;
11153 case i40e_bus_width_pcie_x1
:
11154 strncpy(width
, "1", PCI_WIDTH_SIZE
); break;
11159 dev_info(&pdev
->dev
, "PCI-Express: Speed %sGT/s Width x%s\n",
11162 if (hw
->bus
.width
< i40e_bus_width_pcie_x8
||
11163 hw
->bus
.speed
< i40e_bus_speed_8000
) {
11164 dev_warn(&pdev
->dev
, "PCI-Express bandwidth available for this device may be insufficient for optimal performance.\n");
11165 dev_warn(&pdev
->dev
, "Please move the device to a different PCI-e link with more lanes and/or higher transfer rate.\n");
11169 /* get the requested speeds from the fw */
11170 err
= i40e_aq_get_phy_capabilities(hw
, false, false, &abilities
, NULL
);
11172 dev_dbg(&pf
->pdev
->dev
, "get requested speeds ret = %s last_status = %s\n",
11173 i40e_stat_str(&pf
->hw
, err
),
11174 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
11175 pf
->hw
.phy
.link_info
.requested_speeds
= abilities
.link_speed
;
11177 /* get the supported phy types from the fw */
11178 err
= i40e_aq_get_phy_capabilities(hw
, false, true, &abilities
, NULL
);
11180 dev_dbg(&pf
->pdev
->dev
, "get supported phy types ret = %s last_status = %s\n",
11181 i40e_stat_str(&pf
->hw
, err
),
11182 i40e_aq_str(&pf
->hw
, pf
->hw
.aq
.asq_last_status
));
11183 pf
->hw
.phy
.phy_types
= le32_to_cpu(abilities
.phy_type
);
11185 /* Add a filter to drop all Flow control frames from any VSI from being
11186 * transmitted. By doing so we stop a malicious VF from sending out
11187 * PAUSE or PFC frames and potentially controlling traffic for other
11189 * The FW can still send Flow control frames if enabled.
11191 i40e_add_filter_to_drop_tx_flow_control_frames(&pf
->hw
,
11192 pf
->main_vsi_seid
);
11194 if ((pf
->hw
.device_id
== I40E_DEV_ID_10G_BASE_T
) ||
11195 (pf
->hw
.device_id
== I40E_DEV_ID_10G_BASE_T4
))
11196 pf
->flags
|= I40E_FLAG_HAVE_10GBASET_PHY
;
11198 /* print a string summarizing features */
11199 i40e_print_features(pf
);
11203 /* Unwind what we've done if something failed in the setup */
11205 set_bit(__I40E_DOWN
, &pf
->state
);
11206 i40e_clear_interrupt_scheme(pf
);
11209 i40e_reset_interrupt_capability(pf
);
11210 del_timer_sync(&pf
->service_timer
);
11212 err_configure_lan_hmc
:
11213 (void)i40e_shutdown_lan_hmc(hw
);
11215 kfree(pf
->qp_pile
);
11219 iounmap(hw
->hw_addr
);
11223 pci_disable_pcie_error_reporting(pdev
);
11224 pci_release_mem_regions(pdev
);
11227 pci_disable_device(pdev
);
11232 * i40e_remove - Device removal routine
11233 * @pdev: PCI device information struct
11235 * i40e_remove is called by the PCI subsystem to alert the driver
11236 * that is should release a PCI device. This could be caused by a
11237 * Hot-Plug event, or because the driver is going to be removed from
11240 static void i40e_remove(struct pci_dev
*pdev
)
11242 struct i40e_pf
*pf
= pci_get_drvdata(pdev
);
11243 struct i40e_hw
*hw
= &pf
->hw
;
11244 i40e_status ret_code
;
11247 i40e_dbg_pf_exit(pf
);
11251 /* Disable RSS in hw */
11252 i40e_write_rx_ctl(hw
, I40E_PFQF_HENA(0), 0);
11253 i40e_write_rx_ctl(hw
, I40E_PFQF_HENA(1), 0);
11255 /* no more scheduling of any task */
11256 set_bit(__I40E_SUSPENDED
, &pf
->state
);
11257 set_bit(__I40E_DOWN
, &pf
->state
);
11258 if (pf
->service_timer
.data
)
11259 del_timer_sync(&pf
->service_timer
);
11260 if (pf
->service_task
.func
)
11261 cancel_work_sync(&pf
->service_task
);
11263 if (pf
->flags
& I40E_FLAG_SRIOV_ENABLED
) {
11265 pf
->flags
&= ~I40E_FLAG_SRIOV_ENABLED
;
11268 i40e_fdir_teardown(pf
);
11270 /* If there is a switch structure or any orphans, remove them.
11271 * This will leave only the PF's VSI remaining.
11273 for (i
= 0; i
< I40E_MAX_VEB
; i
++) {
11277 if (pf
->veb
[i
]->uplink_seid
== pf
->mac_seid
||
11278 pf
->veb
[i
]->uplink_seid
== 0)
11279 i40e_switch_branch_release(pf
->veb
[i
]);
11282 /* Now we can shutdown the PF's VSI, just before we kill
11285 if (pf
->vsi
[pf
->lan_vsi
])
11286 i40e_vsi_release(pf
->vsi
[pf
->lan_vsi
]);
11288 /* remove attached clients */
11289 ret_code
= i40e_lan_del_device(pf
);
11291 dev_warn(&pdev
->dev
, "Failed to delete client device: %d\n",
11295 /* shutdown and destroy the HMC */
11296 if (hw
->hmc
.hmc_obj
) {
11297 ret_code
= i40e_shutdown_lan_hmc(hw
);
11299 dev_warn(&pdev
->dev
,
11300 "Failed to destroy the HMC resources: %d\n",
11304 /* shutdown the adminq */
11305 ret_code
= i40e_shutdown_adminq(hw
);
11307 dev_warn(&pdev
->dev
,
11308 "Failed to destroy the Admin Queue resources: %d\n",
11311 /* destroy the locks only once, here */
11312 mutex_destroy(&hw
->aq
.arq_mutex
);
11313 mutex_destroy(&hw
->aq
.asq_mutex
);
11315 /* Clear all dynamic memory lists of rings, q_vectors, and VSIs */
11316 i40e_clear_interrupt_scheme(pf
);
11317 for (i
= 0; i
< pf
->num_alloc_vsi
; i
++) {
11319 i40e_vsi_clear_rings(pf
->vsi
[i
]);
11320 i40e_vsi_clear(pf
->vsi
[i
]);
11325 for (i
= 0; i
< I40E_MAX_VEB
; i
++) {
11330 kfree(pf
->qp_pile
);
11333 iounmap(hw
->hw_addr
);
11335 pci_release_mem_regions(pdev
);
11337 pci_disable_pcie_error_reporting(pdev
);
11338 pci_disable_device(pdev
);
11342 * i40e_pci_error_detected - warning that something funky happened in PCI land
11343 * @pdev: PCI device information struct
11345 * Called to warn that something happened and the error handling steps
11346 * are in progress. Allows the driver to quiesce things, be ready for
11349 static pci_ers_result_t
i40e_pci_error_detected(struct pci_dev
*pdev
,
11350 enum pci_channel_state error
)
11352 struct i40e_pf
*pf
= pci_get_drvdata(pdev
);
11354 dev_info(&pdev
->dev
, "%s: error %d\n", __func__
, error
);
11356 /* shutdown all operations */
11357 if (!test_bit(__I40E_SUSPENDED
, &pf
->state
)) {
11359 i40e_prep_for_reset(pf
);
11363 /* Request a slot reset */
11364 return PCI_ERS_RESULT_NEED_RESET
;
11368 * i40e_pci_error_slot_reset - a PCI slot reset just happened
11369 * @pdev: PCI device information struct
11371 * Called to find if the driver can work with the device now that
11372 * the pci slot has been reset. If a basic connection seems good
11373 * (registers are readable and have sane content) then return a
11374 * happy little PCI_ERS_RESULT_xxx.
11376 static pci_ers_result_t
i40e_pci_error_slot_reset(struct pci_dev
*pdev
)
11378 struct i40e_pf
*pf
= pci_get_drvdata(pdev
);
11379 pci_ers_result_t result
;
11383 dev_dbg(&pdev
->dev
, "%s\n", __func__
);
11384 if (pci_enable_device_mem(pdev
)) {
11385 dev_info(&pdev
->dev
,
11386 "Cannot re-enable PCI device after reset.\n");
11387 result
= PCI_ERS_RESULT_DISCONNECT
;
11389 pci_set_master(pdev
);
11390 pci_restore_state(pdev
);
11391 pci_save_state(pdev
);
11392 pci_wake_from_d3(pdev
, false);
11394 reg
= rd32(&pf
->hw
, I40E_GLGEN_RTRIG
);
11396 result
= PCI_ERS_RESULT_RECOVERED
;
11398 result
= PCI_ERS_RESULT_DISCONNECT
;
11401 err
= pci_cleanup_aer_uncorrect_error_status(pdev
);
11403 dev_info(&pdev
->dev
,
11404 "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n",
11406 /* non-fatal, continue */
11413 * i40e_pci_error_resume - restart operations after PCI error recovery
11414 * @pdev: PCI device information struct
11416 * Called to allow the driver to bring things back up after PCI error
11417 * and/or reset recovery has finished.
11419 static void i40e_pci_error_resume(struct pci_dev
*pdev
)
11421 struct i40e_pf
*pf
= pci_get_drvdata(pdev
);
11423 dev_dbg(&pdev
->dev
, "%s\n", __func__
);
11424 if (test_bit(__I40E_SUSPENDED
, &pf
->state
))
11428 i40e_handle_reset_warning(pf
);
11433 * i40e_shutdown - PCI callback for shutting down
11434 * @pdev: PCI device information struct
11436 static void i40e_shutdown(struct pci_dev
*pdev
)
11438 struct i40e_pf
*pf
= pci_get_drvdata(pdev
);
11439 struct i40e_hw
*hw
= &pf
->hw
;
11441 set_bit(__I40E_SUSPENDED
, &pf
->state
);
11442 set_bit(__I40E_DOWN
, &pf
->state
);
11444 i40e_prep_for_reset(pf
);
11447 wr32(hw
, I40E_PFPM_APM
, (pf
->wol_en
? I40E_PFPM_APM_APME_MASK
: 0));
11448 wr32(hw
, I40E_PFPM_WUFC
, (pf
->wol_en
? I40E_PFPM_WUFC_MAG_MASK
: 0));
11450 del_timer_sync(&pf
->service_timer
);
11451 cancel_work_sync(&pf
->service_task
);
11452 i40e_fdir_teardown(pf
);
11455 i40e_prep_for_reset(pf
);
11458 wr32(hw
, I40E_PFPM_APM
,
11459 (pf
->wol_en
? I40E_PFPM_APM_APME_MASK
: 0));
11460 wr32(hw
, I40E_PFPM_WUFC
,
11461 (pf
->wol_en
? I40E_PFPM_WUFC_MAG_MASK
: 0));
11463 i40e_clear_interrupt_scheme(pf
);
11465 if (system_state
== SYSTEM_POWER_OFF
) {
11466 pci_wake_from_d3(pdev
, pf
->wol_en
);
11467 pci_set_power_state(pdev
, PCI_D3hot
);
11473 * i40e_suspend - PCI callback for moving to D3
11474 * @pdev: PCI device information struct
11476 static int i40e_suspend(struct pci_dev
*pdev
, pm_message_t state
)
11478 struct i40e_pf
*pf
= pci_get_drvdata(pdev
);
11479 struct i40e_hw
*hw
= &pf
->hw
;
11482 set_bit(__I40E_SUSPENDED
, &pf
->state
);
11483 set_bit(__I40E_DOWN
, &pf
->state
);
11486 i40e_prep_for_reset(pf
);
11489 wr32(hw
, I40E_PFPM_APM
, (pf
->wol_en
? I40E_PFPM_APM_APME_MASK
: 0));
11490 wr32(hw
, I40E_PFPM_WUFC
, (pf
->wol_en
? I40E_PFPM_WUFC_MAG_MASK
: 0));
11492 i40e_stop_misc_vector(pf
);
11494 retval
= pci_save_state(pdev
);
11498 pci_wake_from_d3(pdev
, pf
->wol_en
);
11499 pci_set_power_state(pdev
, PCI_D3hot
);
11505 * i40e_resume - PCI callback for waking up from D3
11506 * @pdev: PCI device information struct
11508 static int i40e_resume(struct pci_dev
*pdev
)
11510 struct i40e_pf
*pf
= pci_get_drvdata(pdev
);
11513 pci_set_power_state(pdev
, PCI_D0
);
11514 pci_restore_state(pdev
);
11515 /* pci_restore_state() clears dev->state_saves, so
11516 * call pci_save_state() again to restore it.
11518 pci_save_state(pdev
);
11520 err
= pci_enable_device_mem(pdev
);
11522 dev_err(&pdev
->dev
, "Cannot enable PCI device from suspend\n");
11525 pci_set_master(pdev
);
11527 /* no wakeup events while running */
11528 pci_wake_from_d3(pdev
, false);
11530 /* handling the reset will rebuild the device state */
11531 if (test_and_clear_bit(__I40E_SUSPENDED
, &pf
->state
)) {
11532 clear_bit(__I40E_DOWN
, &pf
->state
);
11534 i40e_reset_and_rebuild(pf
, false);
11542 static const struct pci_error_handlers i40e_err_handler
= {
11543 .error_detected
= i40e_pci_error_detected
,
11544 .slot_reset
= i40e_pci_error_slot_reset
,
11545 .resume
= i40e_pci_error_resume
,
11548 static struct pci_driver i40e_driver
= {
11549 .name
= i40e_driver_name
,
11550 .id_table
= i40e_pci_tbl
,
11551 .probe
= i40e_probe
,
11552 .remove
= i40e_remove
,
11554 .suspend
= i40e_suspend
,
11555 .resume
= i40e_resume
,
11557 .shutdown
= i40e_shutdown
,
11558 .err_handler
= &i40e_err_handler
,
11559 .sriov_configure
= i40e_pci_sriov_configure
,
11563 * i40e_init_module - Driver registration routine
11565 * i40e_init_module is the first routine called when the driver is
11566 * loaded. All it does is register with the PCI subsystem.
11568 static int __init
i40e_init_module(void)
11570 pr_info("%s: %s - version %s\n", i40e_driver_name
,
11571 i40e_driver_string
, i40e_driver_version_str
);
11572 pr_info("%s: %s\n", i40e_driver_name
, i40e_copyright
);
11574 /* we will see if single thread per module is enough for now,
11575 * it can't be any worse than using the system workqueue which
11576 * was already single threaded
11578 i40e_wq
= create_singlethread_workqueue(i40e_driver_name
);
11580 pr_err("%s: Failed to create workqueue\n", i40e_driver_name
);
11585 return pci_register_driver(&i40e_driver
);
11587 module_init(i40e_init_module
);
11590 * i40e_exit_module - Driver exit cleanup routine
11592 * i40e_exit_module is called just before the driver is removed
11595 static void __exit
i40e_exit_module(void)
11597 pci_unregister_driver(&i40e_driver
);
11598 destroy_workqueue(i40e_wq
);
11601 module_exit(i40e_exit_module
);