1 /* Intel(R) Gigabit Ethernet Linux driver
2 * Copyright(c) 2007-2014 Intel Corporation.
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * You should have received a copy of the GNU General Public License along with
14 * this program; if not, see <http://www.gnu.org/licenses/>.
16 * The full GNU General Public License is included in this distribution in
17 * the file called "COPYING".
19 * Contact Information:
20 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
21 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
26 #include <linux/module.h>
27 #include <linux/types.h>
28 #include <linux/init.h>
29 #include <linux/bitops.h>
30 #include <linux/vmalloc.h>
31 #include <linux/pagemap.h>
32 #include <linux/netdevice.h>
33 #include <linux/ipv6.h>
34 #include <linux/slab.h>
35 #include <net/checksum.h>
36 #include <net/ip6_checksum.h>
37 #include <linux/net_tstamp.h>
38 #include <linux/mii.h>
39 #include <linux/ethtool.h>
41 #include <linux/if_vlan.h>
42 #include <linux/pci.h>
43 #include <linux/pci-aspm.h>
44 #include <linux/delay.h>
45 #include <linux/interrupt.h>
47 #include <linux/tcp.h>
48 #include <linux/sctp.h>
49 #include <linux/if_ether.h>
50 #include <linux/aer.h>
51 #include <linux/prefetch.h>
52 #include <linux/pm_runtime.h>
54 #include <linux/dca.h>
56 #include <linux/i2c.h>
62 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
63 __stringify(BUILD) "-k"
64 char igb_driver_name
[] = "igb";
65 char igb_driver_version
[] = DRV_VERSION
;
66 static const char igb_driver_string
[] =
67 "Intel(R) Gigabit Ethernet Network Driver";
68 static const char igb_copyright
[] =
69 "Copyright (c) 2007-2014 Intel Corporation.";
71 static const struct e1000_info
*igb_info_tbl
[] = {
72 [board_82575
] = &e1000_82575_info
,
75 static const struct pci_device_id igb_pci_tbl
[] = {
76 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I354_BACKPLANE_1GBPS
) },
77 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I354_SGMII
) },
78 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS
) },
79 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I211_COPPER
), board_82575
},
80 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I210_COPPER
), board_82575
},
81 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I210_FIBER
), board_82575
},
82 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I210_SERDES
), board_82575
},
83 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I210_SGMII
), board_82575
},
84 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I210_COPPER_FLASHLESS
), board_82575
},
85 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I210_SERDES_FLASHLESS
), board_82575
},
86 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I350_COPPER
), board_82575
},
87 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I350_FIBER
), board_82575
},
88 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I350_SERDES
), board_82575
},
89 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I350_SGMII
), board_82575
},
90 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_COPPER
), board_82575
},
91 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_FIBER
), board_82575
},
92 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_QUAD_FIBER
), board_82575
},
93 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_SERDES
), board_82575
},
94 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_SGMII
), board_82575
},
95 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_COPPER_DUAL
), board_82575
},
96 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_DH89XXCC_SGMII
), board_82575
},
97 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_DH89XXCC_SERDES
), board_82575
},
98 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_DH89XXCC_BACKPLANE
), board_82575
},
99 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_DH89XXCC_SFP
), board_82575
},
100 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576
), board_82575
},
101 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_NS
), board_82575
},
102 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_NS_SERDES
), board_82575
},
103 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_FIBER
), board_82575
},
104 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_SERDES
), board_82575
},
105 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_SERDES_QUAD
), board_82575
},
106 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_QUAD_COPPER_ET2
), board_82575
},
107 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_QUAD_COPPER
), board_82575
},
108 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82575EB_COPPER
), board_82575
},
109 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82575EB_FIBER_SERDES
), board_82575
},
110 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82575GB_QUAD_COPPER
), board_82575
},
111 /* required last entry */
115 MODULE_DEVICE_TABLE(pci
, igb_pci_tbl
);
117 static int igb_setup_all_tx_resources(struct igb_adapter
*);
118 static int igb_setup_all_rx_resources(struct igb_adapter
*);
119 static void igb_free_all_tx_resources(struct igb_adapter
*);
120 static void igb_free_all_rx_resources(struct igb_adapter
*);
121 static void igb_setup_mrqc(struct igb_adapter
*);
122 static int igb_probe(struct pci_dev
*, const struct pci_device_id
*);
123 static void igb_remove(struct pci_dev
*pdev
);
124 static int igb_sw_init(struct igb_adapter
*);
125 static int igb_open(struct net_device
*);
126 static int igb_close(struct net_device
*);
127 static void igb_configure(struct igb_adapter
*);
128 static void igb_configure_tx(struct igb_adapter
*);
129 static void igb_configure_rx(struct igb_adapter
*);
130 static void igb_clean_all_tx_rings(struct igb_adapter
*);
131 static void igb_clean_all_rx_rings(struct igb_adapter
*);
132 static void igb_clean_tx_ring(struct igb_ring
*);
133 static void igb_clean_rx_ring(struct igb_ring
*);
134 static void igb_set_rx_mode(struct net_device
*);
135 static void igb_update_phy_info(unsigned long);
136 static void igb_watchdog(unsigned long);
137 static void igb_watchdog_task(struct work_struct
*);
138 static netdev_tx_t
igb_xmit_frame(struct sk_buff
*skb
, struct net_device
*);
139 static struct rtnl_link_stats64
*igb_get_stats64(struct net_device
*dev
,
140 struct rtnl_link_stats64
*stats
);
141 static int igb_change_mtu(struct net_device
*, int);
142 static int igb_set_mac(struct net_device
*, void *);
143 static void igb_set_uta(struct igb_adapter
*adapter
, bool set
);
144 static irqreturn_t
igb_intr(int irq
, void *);
145 static irqreturn_t
igb_intr_msi(int irq
, void *);
146 static irqreturn_t
igb_msix_other(int irq
, void *);
147 static irqreturn_t
igb_msix_ring(int irq
, void *);
148 #ifdef CONFIG_IGB_DCA
149 static void igb_update_dca(struct igb_q_vector
*);
150 static void igb_setup_dca(struct igb_adapter
*);
151 #endif /* CONFIG_IGB_DCA */
152 static int igb_poll(struct napi_struct
*, int);
153 static bool igb_clean_tx_irq(struct igb_q_vector
*);
154 static int igb_clean_rx_irq(struct igb_q_vector
*, int);
155 static int igb_ioctl(struct net_device
*, struct ifreq
*, int cmd
);
156 static void igb_tx_timeout(struct net_device
*);
157 static void igb_reset_task(struct work_struct
*);
158 static void igb_vlan_mode(struct net_device
*netdev
,
159 netdev_features_t features
);
160 static int igb_vlan_rx_add_vid(struct net_device
*, __be16
, u16
);
161 static int igb_vlan_rx_kill_vid(struct net_device
*, __be16
, u16
);
162 static void igb_restore_vlan(struct igb_adapter
*);
163 static void igb_rar_set_qsel(struct igb_adapter
*, u8
*, u32
, u8
);
164 static void igb_ping_all_vfs(struct igb_adapter
*);
165 static void igb_msg_task(struct igb_adapter
*);
166 static void igb_vmm_control(struct igb_adapter
*);
167 static int igb_set_vf_mac(struct igb_adapter
*, int, unsigned char *);
168 static void igb_restore_vf_multicasts(struct igb_adapter
*adapter
);
169 static int igb_ndo_set_vf_mac(struct net_device
*netdev
, int vf
, u8
*mac
);
170 static int igb_ndo_set_vf_vlan(struct net_device
*netdev
,
171 int vf
, u16 vlan
, u8 qos
);
172 static int igb_ndo_set_vf_bw(struct net_device
*, int, int, int);
173 static int igb_ndo_set_vf_spoofchk(struct net_device
*netdev
, int vf
,
175 static int igb_ndo_get_vf_config(struct net_device
*netdev
, int vf
,
176 struct ifla_vf_info
*ivi
);
177 static void igb_check_vf_rate_limit(struct igb_adapter
*);
179 #ifdef CONFIG_PCI_IOV
180 static int igb_vf_configure(struct igb_adapter
*adapter
, int vf
);
181 static int igb_pci_enable_sriov(struct pci_dev
*dev
, int num_vfs
);
182 static int igb_disable_sriov(struct pci_dev
*dev
);
183 static int igb_pci_disable_sriov(struct pci_dev
*dev
);
187 #ifdef CONFIG_PM_SLEEP
188 static int igb_suspend(struct device
*);
190 static int igb_resume(struct device
*);
191 static int igb_runtime_suspend(struct device
*dev
);
192 static int igb_runtime_resume(struct device
*dev
);
193 static int igb_runtime_idle(struct device
*dev
);
194 static const struct dev_pm_ops igb_pm_ops
= {
195 SET_SYSTEM_SLEEP_PM_OPS(igb_suspend
, igb_resume
)
196 SET_RUNTIME_PM_OPS(igb_runtime_suspend
, igb_runtime_resume
,
200 static void igb_shutdown(struct pci_dev
*);
201 static int igb_pci_sriov_configure(struct pci_dev
*dev
, int num_vfs
);
202 #ifdef CONFIG_IGB_DCA
203 static int igb_notify_dca(struct notifier_block
*, unsigned long, void *);
204 static struct notifier_block dca_notifier
= {
205 .notifier_call
= igb_notify_dca
,
210 #ifdef CONFIG_NET_POLL_CONTROLLER
211 /* for netdump / net console */
212 static void igb_netpoll(struct net_device
*);
214 #ifdef CONFIG_PCI_IOV
215 static unsigned int max_vfs
;
216 module_param(max_vfs
, uint
, 0);
217 MODULE_PARM_DESC(max_vfs
, "Maximum number of virtual functions to allocate per physical function");
218 #endif /* CONFIG_PCI_IOV */
220 static pci_ers_result_t
igb_io_error_detected(struct pci_dev
*,
221 pci_channel_state_t
);
222 static pci_ers_result_t
igb_io_slot_reset(struct pci_dev
*);
223 static void igb_io_resume(struct pci_dev
*);
225 static const struct pci_error_handlers igb_err_handler
= {
226 .error_detected
= igb_io_error_detected
,
227 .slot_reset
= igb_io_slot_reset
,
228 .resume
= igb_io_resume
,
231 static void igb_init_dmac(struct igb_adapter
*adapter
, u32 pba
);
233 static struct pci_driver igb_driver
= {
234 .name
= igb_driver_name
,
235 .id_table
= igb_pci_tbl
,
237 .remove
= igb_remove
,
239 .driver
.pm
= &igb_pm_ops
,
241 .shutdown
= igb_shutdown
,
242 .sriov_configure
= igb_pci_sriov_configure
,
243 .err_handler
= &igb_err_handler
246 MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
247 MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
248 MODULE_LICENSE("GPL");
249 MODULE_VERSION(DRV_VERSION
);
251 #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
252 static int debug
= -1;
253 module_param(debug
, int, 0);
254 MODULE_PARM_DESC(debug
, "Debug level (0=none,...,16=all)");
256 struct igb_reg_info
{
261 static const struct igb_reg_info igb_reg_info_tbl
[] = {
263 /* General Registers */
264 {E1000_CTRL
, "CTRL"},
265 {E1000_STATUS
, "STATUS"},
266 {E1000_CTRL_EXT
, "CTRL_EXT"},
268 /* Interrupt Registers */
272 {E1000_RCTL
, "RCTL"},
273 {E1000_RDLEN(0), "RDLEN"},
274 {E1000_RDH(0), "RDH"},
275 {E1000_RDT(0), "RDT"},
276 {E1000_RXDCTL(0), "RXDCTL"},
277 {E1000_RDBAL(0), "RDBAL"},
278 {E1000_RDBAH(0), "RDBAH"},
281 {E1000_TCTL
, "TCTL"},
282 {E1000_TDBAL(0), "TDBAL"},
283 {E1000_TDBAH(0), "TDBAH"},
284 {E1000_TDLEN(0), "TDLEN"},
285 {E1000_TDH(0), "TDH"},
286 {E1000_TDT(0), "TDT"},
287 {E1000_TXDCTL(0), "TXDCTL"},
288 {E1000_TDFH
, "TDFH"},
289 {E1000_TDFT
, "TDFT"},
290 {E1000_TDFHS
, "TDFHS"},
291 {E1000_TDFPC
, "TDFPC"},
293 /* List Terminator */
297 /* igb_regdump - register printout routine */
298 static void igb_regdump(struct e1000_hw
*hw
, struct igb_reg_info
*reginfo
)
304 switch (reginfo
->ofs
) {
306 for (n
= 0; n
< 4; n
++)
307 regs
[n
] = rd32(E1000_RDLEN(n
));
310 for (n
= 0; n
< 4; n
++)
311 regs
[n
] = rd32(E1000_RDH(n
));
314 for (n
= 0; n
< 4; n
++)
315 regs
[n
] = rd32(E1000_RDT(n
));
317 case E1000_RXDCTL(0):
318 for (n
= 0; n
< 4; n
++)
319 regs
[n
] = rd32(E1000_RXDCTL(n
));
322 for (n
= 0; n
< 4; n
++)
323 regs
[n
] = rd32(E1000_RDBAL(n
));
326 for (n
= 0; n
< 4; n
++)
327 regs
[n
] = rd32(E1000_RDBAH(n
));
330 for (n
= 0; n
< 4; n
++)
331 regs
[n
] = rd32(E1000_RDBAL(n
));
334 for (n
= 0; n
< 4; n
++)
335 regs
[n
] = rd32(E1000_TDBAH(n
));
338 for (n
= 0; n
< 4; n
++)
339 regs
[n
] = rd32(E1000_TDLEN(n
));
342 for (n
= 0; n
< 4; n
++)
343 regs
[n
] = rd32(E1000_TDH(n
));
346 for (n
= 0; n
< 4; n
++)
347 regs
[n
] = rd32(E1000_TDT(n
));
349 case E1000_TXDCTL(0):
350 for (n
= 0; n
< 4; n
++)
351 regs
[n
] = rd32(E1000_TXDCTL(n
));
354 pr_info("%-15s %08x\n", reginfo
->name
, rd32(reginfo
->ofs
));
358 snprintf(rname
, 16, "%s%s", reginfo
->name
, "[0-3]");
359 pr_info("%-15s %08x %08x %08x %08x\n", rname
, regs
[0], regs
[1],
363 /* igb_dump - Print registers, Tx-rings and Rx-rings */
364 static void igb_dump(struct igb_adapter
*adapter
)
366 struct net_device
*netdev
= adapter
->netdev
;
367 struct e1000_hw
*hw
= &adapter
->hw
;
368 struct igb_reg_info
*reginfo
;
369 struct igb_ring
*tx_ring
;
370 union e1000_adv_tx_desc
*tx_desc
;
371 struct my_u0
{ u64 a
; u64 b
; } *u0
;
372 struct igb_ring
*rx_ring
;
373 union e1000_adv_rx_desc
*rx_desc
;
377 if (!netif_msg_hw(adapter
))
380 /* Print netdevice Info */
382 dev_info(&adapter
->pdev
->dev
, "Net device Info\n");
383 pr_info("Device Name state trans_start last_rx\n");
384 pr_info("%-15s %016lX %016lX %016lX\n", netdev
->name
,
385 netdev
->state
, netdev
->trans_start
, netdev
->last_rx
);
388 /* Print Registers */
389 dev_info(&adapter
->pdev
->dev
, "Register Dump\n");
390 pr_info(" Register Name Value\n");
391 for (reginfo
= (struct igb_reg_info
*)igb_reg_info_tbl
;
392 reginfo
->name
; reginfo
++) {
393 igb_regdump(hw
, reginfo
);
396 /* Print TX Ring Summary */
397 if (!netdev
|| !netif_running(netdev
))
400 dev_info(&adapter
->pdev
->dev
, "TX Rings Summary\n");
401 pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
402 for (n
= 0; n
< adapter
->num_tx_queues
; n
++) {
403 struct igb_tx_buffer
*buffer_info
;
404 tx_ring
= adapter
->tx_ring
[n
];
405 buffer_info
= &tx_ring
->tx_buffer_info
[tx_ring
->next_to_clean
];
406 pr_info(" %5d %5X %5X %016llX %04X %p %016llX\n",
407 n
, tx_ring
->next_to_use
, tx_ring
->next_to_clean
,
408 (u64
)dma_unmap_addr(buffer_info
, dma
),
409 dma_unmap_len(buffer_info
, len
),
410 buffer_info
->next_to_watch
,
411 (u64
)buffer_info
->time_stamp
);
415 if (!netif_msg_tx_done(adapter
))
416 goto rx_ring_summary
;
418 dev_info(&adapter
->pdev
->dev
, "TX Rings Dump\n");
420 /* Transmit Descriptor Formats
422 * Advanced Transmit Descriptor
423 * +--------------------------------------------------------------+
424 * 0 | Buffer Address [63:0] |
425 * +--------------------------------------------------------------+
426 * 8 | PAYLEN | PORTS |CC|IDX | STA | DCMD |DTYP|MAC|RSV| DTALEN |
427 * +--------------------------------------------------------------+
428 * 63 46 45 40 39 38 36 35 32 31 24 15 0
431 for (n
= 0; n
< adapter
->num_tx_queues
; n
++) {
432 tx_ring
= adapter
->tx_ring
[n
];
433 pr_info("------------------------------------\n");
434 pr_info("TX QUEUE INDEX = %d\n", tx_ring
->queue_index
);
435 pr_info("------------------------------------\n");
436 pr_info("T [desc] [address 63:0 ] [PlPOCIStDDM Ln] [bi->dma ] leng ntw timestamp bi->skb\n");
438 for (i
= 0; tx_ring
->desc
&& (i
< tx_ring
->count
); i
++) {
439 const char *next_desc
;
440 struct igb_tx_buffer
*buffer_info
;
441 tx_desc
= IGB_TX_DESC(tx_ring
, i
);
442 buffer_info
= &tx_ring
->tx_buffer_info
[i
];
443 u0
= (struct my_u0
*)tx_desc
;
444 if (i
== tx_ring
->next_to_use
&&
445 i
== tx_ring
->next_to_clean
)
446 next_desc
= " NTC/U";
447 else if (i
== tx_ring
->next_to_use
)
449 else if (i
== tx_ring
->next_to_clean
)
454 pr_info("T [0x%03X] %016llX %016llX %016llX %04X %p %016llX %p%s\n",
455 i
, le64_to_cpu(u0
->a
),
457 (u64
)dma_unmap_addr(buffer_info
, dma
),
458 dma_unmap_len(buffer_info
, len
),
459 buffer_info
->next_to_watch
,
460 (u64
)buffer_info
->time_stamp
,
461 buffer_info
->skb
, next_desc
);
463 if (netif_msg_pktdata(adapter
) && buffer_info
->skb
)
464 print_hex_dump(KERN_INFO
, "",
466 16, 1, buffer_info
->skb
->data
,
467 dma_unmap_len(buffer_info
, len
),
472 /* Print RX Rings Summary */
474 dev_info(&adapter
->pdev
->dev
, "RX Rings Summary\n");
475 pr_info("Queue [NTU] [NTC]\n");
476 for (n
= 0; n
< adapter
->num_rx_queues
; n
++) {
477 rx_ring
= adapter
->rx_ring
[n
];
478 pr_info(" %5d %5X %5X\n",
479 n
, rx_ring
->next_to_use
, rx_ring
->next_to_clean
);
483 if (!netif_msg_rx_status(adapter
))
486 dev_info(&adapter
->pdev
->dev
, "RX Rings Dump\n");
488 /* Advanced Receive Descriptor (Read) Format
490 * +-----------------------------------------------------+
491 * 0 | Packet Buffer Address [63:1] |A0/NSE|
492 * +----------------------------------------------+------+
493 * 8 | Header Buffer Address [63:1] | DD |
494 * +-----------------------------------------------------+
497 * Advanced Receive Descriptor (Write-Back) Format
499 * 63 48 47 32 31 30 21 20 17 16 4 3 0
500 * +------------------------------------------------------+
501 * 0 | Packet IP |SPH| HDR_LEN | RSV|Packet| RSS |
502 * | Checksum Ident | | | | Type | Type |
503 * +------------------------------------------------------+
504 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
505 * +------------------------------------------------------+
506 * 63 48 47 32 31 20 19 0
509 for (n
= 0; n
< adapter
->num_rx_queues
; n
++) {
510 rx_ring
= adapter
->rx_ring
[n
];
511 pr_info("------------------------------------\n");
512 pr_info("RX QUEUE INDEX = %d\n", rx_ring
->queue_index
);
513 pr_info("------------------------------------\n");
514 pr_info("R [desc] [ PktBuf A0] [ HeadBuf DD] [bi->dma ] [bi->skb] <-- Adv Rx Read format\n");
515 pr_info("RWB[desc] [PcsmIpSHl PtRs] [vl er S cks ln] ---------------- [bi->skb] <-- Adv Rx Write-Back format\n");
517 for (i
= 0; i
< rx_ring
->count
; i
++) {
518 const char *next_desc
;
519 struct igb_rx_buffer
*buffer_info
;
520 buffer_info
= &rx_ring
->rx_buffer_info
[i
];
521 rx_desc
= IGB_RX_DESC(rx_ring
, i
);
522 u0
= (struct my_u0
*)rx_desc
;
523 staterr
= le32_to_cpu(rx_desc
->wb
.upper
.status_error
);
525 if (i
== rx_ring
->next_to_use
)
527 else if (i
== rx_ring
->next_to_clean
)
532 if (staterr
& E1000_RXD_STAT_DD
) {
533 /* Descriptor Done */
534 pr_info("%s[0x%03X] %016llX %016llX ---------------- %s\n",
540 pr_info("%s[0x%03X] %016llX %016llX %016llX %s\n",
544 (u64
)buffer_info
->dma
,
547 if (netif_msg_pktdata(adapter
) &&
548 buffer_info
->dma
&& buffer_info
->page
) {
549 print_hex_dump(KERN_INFO
, "",
552 page_address(buffer_info
->page
) +
553 buffer_info
->page_offset
,
565 * igb_get_i2c_data - Reads the I2C SDA data bit
566 * @hw: pointer to hardware structure
567 * @i2cctl: Current value of I2CCTL register
569 * Returns the I2C data bit value
571 static int igb_get_i2c_data(void *data
)
573 struct igb_adapter
*adapter
= (struct igb_adapter
*)data
;
574 struct e1000_hw
*hw
= &adapter
->hw
;
575 s32 i2cctl
= rd32(E1000_I2CPARAMS
);
577 return !!(i2cctl
& E1000_I2C_DATA_IN
);
581 * igb_set_i2c_data - Sets the I2C data bit
582 * @data: pointer to hardware structure
583 * @state: I2C data value (0 or 1) to set
585 * Sets the I2C data bit
587 static void igb_set_i2c_data(void *data
, int state
)
589 struct igb_adapter
*adapter
= (struct igb_adapter
*)data
;
590 struct e1000_hw
*hw
= &adapter
->hw
;
591 s32 i2cctl
= rd32(E1000_I2CPARAMS
);
594 i2cctl
|= E1000_I2C_DATA_OUT
;
596 i2cctl
&= ~E1000_I2C_DATA_OUT
;
598 i2cctl
&= ~E1000_I2C_DATA_OE_N
;
599 i2cctl
|= E1000_I2C_CLK_OE_N
;
600 wr32(E1000_I2CPARAMS
, i2cctl
);
606 * igb_set_i2c_clk - Sets the I2C SCL clock
607 * @data: pointer to hardware structure
608 * @state: state to set clock
610 * Sets the I2C clock line to state
612 static void igb_set_i2c_clk(void *data
, int state
)
614 struct igb_adapter
*adapter
= (struct igb_adapter
*)data
;
615 struct e1000_hw
*hw
= &adapter
->hw
;
616 s32 i2cctl
= rd32(E1000_I2CPARAMS
);
619 i2cctl
|= E1000_I2C_CLK_OUT
;
620 i2cctl
&= ~E1000_I2C_CLK_OE_N
;
622 i2cctl
&= ~E1000_I2C_CLK_OUT
;
623 i2cctl
&= ~E1000_I2C_CLK_OE_N
;
625 wr32(E1000_I2CPARAMS
, i2cctl
);
630 * igb_get_i2c_clk - Gets the I2C SCL clock state
631 * @data: pointer to hardware structure
633 * Gets the I2C clock state
635 static int igb_get_i2c_clk(void *data
)
637 struct igb_adapter
*adapter
= (struct igb_adapter
*)data
;
638 struct e1000_hw
*hw
= &adapter
->hw
;
639 s32 i2cctl
= rd32(E1000_I2CPARAMS
);
641 return !!(i2cctl
& E1000_I2C_CLK_IN
);
644 static const struct i2c_algo_bit_data igb_i2c_algo
= {
645 .setsda
= igb_set_i2c_data
,
646 .setscl
= igb_set_i2c_clk
,
647 .getsda
= igb_get_i2c_data
,
648 .getscl
= igb_get_i2c_clk
,
654 * igb_get_hw_dev - return device
655 * @hw: pointer to hardware structure
657 * used by hardware layer to print debugging information
659 struct net_device
*igb_get_hw_dev(struct e1000_hw
*hw
)
661 struct igb_adapter
*adapter
= hw
->back
;
662 return adapter
->netdev
;
666 * igb_init_module - Driver Registration Routine
668 * igb_init_module is the first routine called when the driver is
669 * loaded. All it does is register with the PCI subsystem.
671 static int __init
igb_init_module(void)
675 pr_info("%s - version %s\n",
676 igb_driver_string
, igb_driver_version
);
677 pr_info("%s\n", igb_copyright
);
679 #ifdef CONFIG_IGB_DCA
680 dca_register_notify(&dca_notifier
);
682 ret
= pci_register_driver(&igb_driver
);
686 module_init(igb_init_module
);
689 * igb_exit_module - Driver Exit Cleanup Routine
691 * igb_exit_module is called just before the driver is removed
694 static void __exit
igb_exit_module(void)
696 #ifdef CONFIG_IGB_DCA
697 dca_unregister_notify(&dca_notifier
);
699 pci_unregister_driver(&igb_driver
);
702 module_exit(igb_exit_module
);
704 #define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1))
706 * igb_cache_ring_register - Descriptor ring to register mapping
707 * @adapter: board private structure to initialize
709 * Once we know the feature-set enabled for the device, we'll cache
710 * the register offset the descriptor ring is assigned to.
712 static void igb_cache_ring_register(struct igb_adapter
*adapter
)
715 u32 rbase_offset
= adapter
->vfs_allocated_count
;
717 switch (adapter
->hw
.mac
.type
) {
719 /* The queues are allocated for virtualization such that VF 0
720 * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc.
721 * In order to avoid collision we start at the first free queue
722 * and continue consuming queues in the same sequence
724 if (adapter
->vfs_allocated_count
) {
725 for (; i
< adapter
->rss_queues
; i
++)
726 adapter
->rx_ring
[i
]->reg_idx
= rbase_offset
+
738 for (; i
< adapter
->num_rx_queues
; i
++)
739 adapter
->rx_ring
[i
]->reg_idx
= rbase_offset
+ i
;
740 for (; j
< adapter
->num_tx_queues
; j
++)
741 adapter
->tx_ring
[j
]->reg_idx
= rbase_offset
+ j
;
746 u32
igb_rd32(struct e1000_hw
*hw
, u32 reg
)
748 struct igb_adapter
*igb
= container_of(hw
, struct igb_adapter
, hw
);
749 u8 __iomem
*hw_addr
= ACCESS_ONCE(hw
->hw_addr
);
752 if (E1000_REMOVED(hw_addr
))
755 value
= readl(&hw_addr
[reg
]);
757 /* reads should not return all F's */
758 if (!(~value
) && (!reg
|| !(~readl(hw_addr
)))) {
759 struct net_device
*netdev
= igb
->netdev
;
761 netif_device_detach(netdev
);
762 netdev_err(netdev
, "PCIe link lost, device now detached\n");
769 * igb_write_ivar - configure ivar for given MSI-X vector
770 * @hw: pointer to the HW structure
771 * @msix_vector: vector number we are allocating to a given ring
772 * @index: row index of IVAR register to write within IVAR table
773 * @offset: column offset of in IVAR, should be multiple of 8
775 * This function is intended to handle the writing of the IVAR register
776 * for adapters 82576 and newer. The IVAR table consists of 2 columns,
777 * each containing an cause allocation for an Rx and Tx ring, and a
778 * variable number of rows depending on the number of queues supported.
780 static void igb_write_ivar(struct e1000_hw
*hw
, int msix_vector
,
781 int index
, int offset
)
783 u32 ivar
= array_rd32(E1000_IVAR0
, index
);
785 /* clear any bits that are currently set */
786 ivar
&= ~((u32
)0xFF << offset
);
788 /* write vector and valid bit */
789 ivar
|= (msix_vector
| E1000_IVAR_VALID
) << offset
;
791 array_wr32(E1000_IVAR0
, index
, ivar
);
794 #define IGB_N0_QUEUE -1
795 static void igb_assign_vector(struct igb_q_vector
*q_vector
, int msix_vector
)
797 struct igb_adapter
*adapter
= q_vector
->adapter
;
798 struct e1000_hw
*hw
= &adapter
->hw
;
799 int rx_queue
= IGB_N0_QUEUE
;
800 int tx_queue
= IGB_N0_QUEUE
;
803 if (q_vector
->rx
.ring
)
804 rx_queue
= q_vector
->rx
.ring
->reg_idx
;
805 if (q_vector
->tx
.ring
)
806 tx_queue
= q_vector
->tx
.ring
->reg_idx
;
808 switch (hw
->mac
.type
) {
810 /* The 82575 assigns vectors using a bitmask, which matches the
811 * bitmask for the EICR/EIMS/EIMC registers. To assign one
812 * or more queues to a vector, we write the appropriate bits
813 * into the MSIXBM register for that vector.
815 if (rx_queue
> IGB_N0_QUEUE
)
816 msixbm
= E1000_EICR_RX_QUEUE0
<< rx_queue
;
817 if (tx_queue
> IGB_N0_QUEUE
)
818 msixbm
|= E1000_EICR_TX_QUEUE0
<< tx_queue
;
819 if (!(adapter
->flags
& IGB_FLAG_HAS_MSIX
) && msix_vector
== 0)
820 msixbm
|= E1000_EIMS_OTHER
;
821 array_wr32(E1000_MSIXBM(0), msix_vector
, msixbm
);
822 q_vector
->eims_value
= msixbm
;
825 /* 82576 uses a table that essentially consists of 2 columns
826 * with 8 rows. The ordering is column-major so we use the
827 * lower 3 bits as the row index, and the 4th bit as the
830 if (rx_queue
> IGB_N0_QUEUE
)
831 igb_write_ivar(hw
, msix_vector
,
833 (rx_queue
& 0x8) << 1);
834 if (tx_queue
> IGB_N0_QUEUE
)
835 igb_write_ivar(hw
, msix_vector
,
837 ((tx_queue
& 0x8) << 1) + 8);
838 q_vector
->eims_value
= 1 << msix_vector
;
845 /* On 82580 and newer adapters the scheme is similar to 82576
846 * however instead of ordering column-major we have things
847 * ordered row-major. So we traverse the table by using
848 * bit 0 as the column offset, and the remaining bits as the
851 if (rx_queue
> IGB_N0_QUEUE
)
852 igb_write_ivar(hw
, msix_vector
,
854 (rx_queue
& 0x1) << 4);
855 if (tx_queue
> IGB_N0_QUEUE
)
856 igb_write_ivar(hw
, msix_vector
,
858 ((tx_queue
& 0x1) << 4) + 8);
859 q_vector
->eims_value
= 1 << msix_vector
;
866 /* add q_vector eims value to global eims_enable_mask */
867 adapter
->eims_enable_mask
|= q_vector
->eims_value
;
869 /* configure q_vector to set itr on first interrupt */
870 q_vector
->set_itr
= 1;
874 * igb_configure_msix - Configure MSI-X hardware
875 * @adapter: board private structure to initialize
877 * igb_configure_msix sets up the hardware to properly
878 * generate MSI-X interrupts.
880 static void igb_configure_msix(struct igb_adapter
*adapter
)
884 struct e1000_hw
*hw
= &adapter
->hw
;
886 adapter
->eims_enable_mask
= 0;
888 /* set vector for other causes, i.e. link changes */
889 switch (hw
->mac
.type
) {
891 tmp
= rd32(E1000_CTRL_EXT
);
892 /* enable MSI-X PBA support*/
893 tmp
|= E1000_CTRL_EXT_PBA_CLR
;
895 /* Auto-Mask interrupts upon ICR read. */
896 tmp
|= E1000_CTRL_EXT_EIAME
;
897 tmp
|= E1000_CTRL_EXT_IRCA
;
899 wr32(E1000_CTRL_EXT
, tmp
);
901 /* enable msix_other interrupt */
902 array_wr32(E1000_MSIXBM(0), vector
++, E1000_EIMS_OTHER
);
903 adapter
->eims_other
= E1000_EIMS_OTHER
;
913 /* Turn on MSI-X capability first, or our settings
914 * won't stick. And it will take days to debug.
916 wr32(E1000_GPIE
, E1000_GPIE_MSIX_MODE
|
917 E1000_GPIE_PBA
| E1000_GPIE_EIAME
|
920 /* enable msix_other interrupt */
921 adapter
->eims_other
= 1 << vector
;
922 tmp
= (vector
++ | E1000_IVAR_VALID
) << 8;
924 wr32(E1000_IVAR_MISC
, tmp
);
927 /* do nothing, since nothing else supports MSI-X */
929 } /* switch (hw->mac.type) */
931 adapter
->eims_enable_mask
|= adapter
->eims_other
;
933 for (i
= 0; i
< adapter
->num_q_vectors
; i
++)
934 igb_assign_vector(adapter
->q_vector
[i
], vector
++);
940 * igb_request_msix - Initialize MSI-X interrupts
941 * @adapter: board private structure to initialize
943 * igb_request_msix allocates MSI-X vectors and requests interrupts from the
946 static int igb_request_msix(struct igb_adapter
*adapter
)
948 struct net_device
*netdev
= adapter
->netdev
;
949 int i
, err
= 0, vector
= 0, free_vector
= 0;
951 err
= request_irq(adapter
->msix_entries
[vector
].vector
,
952 igb_msix_other
, 0, netdev
->name
, adapter
);
956 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
957 struct igb_q_vector
*q_vector
= adapter
->q_vector
[i
];
961 q_vector
->itr_register
= adapter
->io_addr
+ E1000_EITR(vector
);
963 if (q_vector
->rx
.ring
&& q_vector
->tx
.ring
)
964 sprintf(q_vector
->name
, "%s-TxRx-%u", netdev
->name
,
965 q_vector
->rx
.ring
->queue_index
);
966 else if (q_vector
->tx
.ring
)
967 sprintf(q_vector
->name
, "%s-tx-%u", netdev
->name
,
968 q_vector
->tx
.ring
->queue_index
);
969 else if (q_vector
->rx
.ring
)
970 sprintf(q_vector
->name
, "%s-rx-%u", netdev
->name
,
971 q_vector
->rx
.ring
->queue_index
);
973 sprintf(q_vector
->name
, "%s-unused", netdev
->name
);
975 err
= request_irq(adapter
->msix_entries
[vector
].vector
,
976 igb_msix_ring
, 0, q_vector
->name
,
982 igb_configure_msix(adapter
);
986 /* free already assigned IRQs */
987 free_irq(adapter
->msix_entries
[free_vector
++].vector
, adapter
);
990 for (i
= 0; i
< vector
; i
++) {
991 free_irq(adapter
->msix_entries
[free_vector
++].vector
,
992 adapter
->q_vector
[i
]);
999 * igb_free_q_vector - Free memory allocated for specific interrupt vector
1000 * @adapter: board private structure to initialize
1001 * @v_idx: Index of vector to be freed
1003 * This function frees the memory allocated to the q_vector.
1005 static void igb_free_q_vector(struct igb_adapter
*adapter
, int v_idx
)
1007 struct igb_q_vector
*q_vector
= adapter
->q_vector
[v_idx
];
1009 adapter
->q_vector
[v_idx
] = NULL
;
1011 /* igb_get_stats64() might access the rings on this vector,
1012 * we must wait a grace period before freeing it.
1015 kfree_rcu(q_vector
, rcu
);
1019 * igb_reset_q_vector - Reset config for interrupt vector
1020 * @adapter: board private structure to initialize
1021 * @v_idx: Index of vector to be reset
1023 * If NAPI is enabled it will delete any references to the
1024 * NAPI struct. This is preparation for igb_free_q_vector.
1026 static void igb_reset_q_vector(struct igb_adapter
*adapter
, int v_idx
)
1028 struct igb_q_vector
*q_vector
= adapter
->q_vector
[v_idx
];
1030 /* Coming from igb_set_interrupt_capability, the vectors are not yet
1031 * allocated. So, q_vector is NULL so we should stop here.
1036 if (q_vector
->tx
.ring
)
1037 adapter
->tx_ring
[q_vector
->tx
.ring
->queue_index
] = NULL
;
1039 if (q_vector
->rx
.ring
)
1040 adapter
->rx_ring
[q_vector
->rx
.ring
->queue_index
] = NULL
;
1042 netif_napi_del(&q_vector
->napi
);
1046 static void igb_reset_interrupt_capability(struct igb_adapter
*adapter
)
1048 int v_idx
= adapter
->num_q_vectors
;
1050 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
)
1051 pci_disable_msix(adapter
->pdev
);
1052 else if (adapter
->flags
& IGB_FLAG_HAS_MSI
)
1053 pci_disable_msi(adapter
->pdev
);
1056 igb_reset_q_vector(adapter
, v_idx
);
1060 * igb_free_q_vectors - Free memory allocated for interrupt vectors
1061 * @adapter: board private structure to initialize
1063 * This function frees the memory allocated to the q_vectors. In addition if
1064 * NAPI is enabled it will delete any references to the NAPI struct prior
1065 * to freeing the q_vector.
1067 static void igb_free_q_vectors(struct igb_adapter
*adapter
)
1069 int v_idx
= adapter
->num_q_vectors
;
1071 adapter
->num_tx_queues
= 0;
1072 adapter
->num_rx_queues
= 0;
1073 adapter
->num_q_vectors
= 0;
1076 igb_reset_q_vector(adapter
, v_idx
);
1077 igb_free_q_vector(adapter
, v_idx
);
1082 * igb_clear_interrupt_scheme - reset the device to a state of no interrupts
1083 * @adapter: board private structure to initialize
1085 * This function resets the device so that it has 0 Rx queues, Tx queues, and
1086 * MSI-X interrupts allocated.
1088 static void igb_clear_interrupt_scheme(struct igb_adapter
*adapter
)
1090 igb_free_q_vectors(adapter
);
1091 igb_reset_interrupt_capability(adapter
);
1095 * igb_set_interrupt_capability - set MSI or MSI-X if supported
1096 * @adapter: board private structure to initialize
1097 * @msix: boolean value of MSIX capability
1099 * Attempt to configure interrupts using the best available
1100 * capabilities of the hardware and kernel.
1102 static void igb_set_interrupt_capability(struct igb_adapter
*adapter
, bool msix
)
1109 adapter
->flags
|= IGB_FLAG_HAS_MSIX
;
1111 /* Number of supported queues. */
1112 adapter
->num_rx_queues
= adapter
->rss_queues
;
1113 if (adapter
->vfs_allocated_count
)
1114 adapter
->num_tx_queues
= 1;
1116 adapter
->num_tx_queues
= adapter
->rss_queues
;
1118 /* start with one vector for every Rx queue */
1119 numvecs
= adapter
->num_rx_queues
;
1121 /* if Tx handler is separate add 1 for every Tx queue */
1122 if (!(adapter
->flags
& IGB_FLAG_QUEUE_PAIRS
))
1123 numvecs
+= adapter
->num_tx_queues
;
1125 /* store the number of vectors reserved for queues */
1126 adapter
->num_q_vectors
= numvecs
;
1128 /* add 1 vector for link status interrupts */
1130 for (i
= 0; i
< numvecs
; i
++)
1131 adapter
->msix_entries
[i
].entry
= i
;
1133 err
= pci_enable_msix_range(adapter
->pdev
,
1134 adapter
->msix_entries
,
1140 igb_reset_interrupt_capability(adapter
);
1142 /* If we can't do MSI-X, try MSI */
1144 adapter
->flags
&= ~IGB_FLAG_HAS_MSIX
;
1145 #ifdef CONFIG_PCI_IOV
1146 /* disable SR-IOV for non MSI-X configurations */
1147 if (adapter
->vf_data
) {
1148 struct e1000_hw
*hw
= &adapter
->hw
;
1149 /* disable iov and allow time for transactions to clear */
1150 pci_disable_sriov(adapter
->pdev
);
1153 kfree(adapter
->vf_data
);
1154 adapter
->vf_data
= NULL
;
1155 wr32(E1000_IOVCTL
, E1000_IOVCTL_REUSE_VFQ
);
1158 dev_info(&adapter
->pdev
->dev
, "IOV Disabled\n");
1161 adapter
->vfs_allocated_count
= 0;
1162 adapter
->rss_queues
= 1;
1163 adapter
->flags
|= IGB_FLAG_QUEUE_PAIRS
;
1164 adapter
->num_rx_queues
= 1;
1165 adapter
->num_tx_queues
= 1;
1166 adapter
->num_q_vectors
= 1;
1167 if (!pci_enable_msi(adapter
->pdev
))
1168 adapter
->flags
|= IGB_FLAG_HAS_MSI
;
1171 static void igb_add_ring(struct igb_ring
*ring
,
1172 struct igb_ring_container
*head
)
1179 * igb_alloc_q_vector - Allocate memory for a single interrupt vector
1180 * @adapter: board private structure to initialize
1181 * @v_count: q_vectors allocated on adapter, used for ring interleaving
1182 * @v_idx: index of vector in adapter struct
1183 * @txr_count: total number of Tx rings to allocate
1184 * @txr_idx: index of first Tx ring to allocate
1185 * @rxr_count: total number of Rx rings to allocate
1186 * @rxr_idx: index of first Rx ring to allocate
1188 * We allocate one q_vector. If allocation fails we return -ENOMEM.
1190 static int igb_alloc_q_vector(struct igb_adapter
*adapter
,
1191 int v_count
, int v_idx
,
1192 int txr_count
, int txr_idx
,
1193 int rxr_count
, int rxr_idx
)
1195 struct igb_q_vector
*q_vector
;
1196 struct igb_ring
*ring
;
1197 int ring_count
, size
;
1199 /* igb only supports 1 Tx and/or 1 Rx queue per vector */
1200 if (txr_count
> 1 || rxr_count
> 1)
1203 ring_count
= txr_count
+ rxr_count
;
1204 size
= sizeof(struct igb_q_vector
) +
1205 (sizeof(struct igb_ring
) * ring_count
);
1207 /* allocate q_vector and rings */
1208 q_vector
= adapter
->q_vector
[v_idx
];
1210 q_vector
= kzalloc(size
, GFP_KERNEL
);
1211 } else if (size
> ksize(q_vector
)) {
1212 kfree_rcu(q_vector
, rcu
);
1213 q_vector
= kzalloc(size
, GFP_KERNEL
);
1215 memset(q_vector
, 0, size
);
1220 /* initialize NAPI */
1221 netif_napi_add(adapter
->netdev
, &q_vector
->napi
,
1224 /* tie q_vector and adapter together */
1225 adapter
->q_vector
[v_idx
] = q_vector
;
1226 q_vector
->adapter
= adapter
;
1228 /* initialize work limits */
1229 q_vector
->tx
.work_limit
= adapter
->tx_work_limit
;
1231 /* initialize ITR configuration */
1232 q_vector
->itr_register
= adapter
->io_addr
+ E1000_EITR(0);
1233 q_vector
->itr_val
= IGB_START_ITR
;
1235 /* initialize pointer to rings */
1236 ring
= q_vector
->ring
;
1240 /* rx or rx/tx vector */
1241 if (!adapter
->rx_itr_setting
|| adapter
->rx_itr_setting
> 3)
1242 q_vector
->itr_val
= adapter
->rx_itr_setting
;
1244 /* tx only vector */
1245 if (!adapter
->tx_itr_setting
|| adapter
->tx_itr_setting
> 3)
1246 q_vector
->itr_val
= adapter
->tx_itr_setting
;
1250 /* assign generic ring traits */
1251 ring
->dev
= &adapter
->pdev
->dev
;
1252 ring
->netdev
= adapter
->netdev
;
1254 /* configure backlink on ring */
1255 ring
->q_vector
= q_vector
;
1257 /* update q_vector Tx values */
1258 igb_add_ring(ring
, &q_vector
->tx
);
1260 /* For 82575, context index must be unique per ring. */
1261 if (adapter
->hw
.mac
.type
== e1000_82575
)
1262 set_bit(IGB_RING_FLAG_TX_CTX_IDX
, &ring
->flags
);
1264 /* apply Tx specific ring traits */
1265 ring
->count
= adapter
->tx_ring_count
;
1266 ring
->queue_index
= txr_idx
;
1268 u64_stats_init(&ring
->tx_syncp
);
1269 u64_stats_init(&ring
->tx_syncp2
);
1271 /* assign ring to adapter */
1272 adapter
->tx_ring
[txr_idx
] = ring
;
1274 /* push pointer to next ring */
1279 /* assign generic ring traits */
1280 ring
->dev
= &adapter
->pdev
->dev
;
1281 ring
->netdev
= adapter
->netdev
;
1283 /* configure backlink on ring */
1284 ring
->q_vector
= q_vector
;
1286 /* update q_vector Rx values */
1287 igb_add_ring(ring
, &q_vector
->rx
);
1289 /* set flag indicating ring supports SCTP checksum offload */
1290 if (adapter
->hw
.mac
.type
>= e1000_82576
)
1291 set_bit(IGB_RING_FLAG_RX_SCTP_CSUM
, &ring
->flags
);
1293 /* On i350, i354, i210, and i211, loopback VLAN packets
1294 * have the tag byte-swapped.
1296 if (adapter
->hw
.mac
.type
>= e1000_i350
)
1297 set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP
, &ring
->flags
);
1299 /* apply Rx specific ring traits */
1300 ring
->count
= adapter
->rx_ring_count
;
1301 ring
->queue_index
= rxr_idx
;
1303 u64_stats_init(&ring
->rx_syncp
);
1305 /* assign ring to adapter */
1306 adapter
->rx_ring
[rxr_idx
] = ring
;
1314 * igb_alloc_q_vectors - Allocate memory for interrupt vectors
1315 * @adapter: board private structure to initialize
1317 * We allocate one q_vector per queue interrupt. If allocation fails we
1320 static int igb_alloc_q_vectors(struct igb_adapter
*adapter
)
1322 int q_vectors
= adapter
->num_q_vectors
;
1323 int rxr_remaining
= adapter
->num_rx_queues
;
1324 int txr_remaining
= adapter
->num_tx_queues
;
1325 int rxr_idx
= 0, txr_idx
= 0, v_idx
= 0;
1328 if (q_vectors
>= (rxr_remaining
+ txr_remaining
)) {
1329 for (; rxr_remaining
; v_idx
++) {
1330 err
= igb_alloc_q_vector(adapter
, q_vectors
, v_idx
,
1336 /* update counts and index */
1342 for (; v_idx
< q_vectors
; v_idx
++) {
1343 int rqpv
= DIV_ROUND_UP(rxr_remaining
, q_vectors
- v_idx
);
1344 int tqpv
= DIV_ROUND_UP(txr_remaining
, q_vectors
- v_idx
);
1346 err
= igb_alloc_q_vector(adapter
, q_vectors
, v_idx
,
1347 tqpv
, txr_idx
, rqpv
, rxr_idx
);
1352 /* update counts and index */
1353 rxr_remaining
-= rqpv
;
1354 txr_remaining
-= tqpv
;
1362 adapter
->num_tx_queues
= 0;
1363 adapter
->num_rx_queues
= 0;
1364 adapter
->num_q_vectors
= 0;
1367 igb_free_q_vector(adapter
, v_idx
);
1373 * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
1374 * @adapter: board private structure to initialize
1375 * @msix: boolean value of MSIX capability
1377 * This function initializes the interrupts and allocates all of the queues.
1379 static int igb_init_interrupt_scheme(struct igb_adapter
*adapter
, bool msix
)
1381 struct pci_dev
*pdev
= adapter
->pdev
;
1384 igb_set_interrupt_capability(adapter
, msix
);
1386 err
= igb_alloc_q_vectors(adapter
);
1388 dev_err(&pdev
->dev
, "Unable to allocate memory for vectors\n");
1389 goto err_alloc_q_vectors
;
1392 igb_cache_ring_register(adapter
);
1396 err_alloc_q_vectors
:
1397 igb_reset_interrupt_capability(adapter
);
1402 * igb_request_irq - initialize interrupts
1403 * @adapter: board private structure to initialize
1405 * Attempts to configure interrupts using the best available
1406 * capabilities of the hardware and kernel.
1408 static int igb_request_irq(struct igb_adapter
*adapter
)
1410 struct net_device
*netdev
= adapter
->netdev
;
1411 struct pci_dev
*pdev
= adapter
->pdev
;
1414 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
) {
1415 err
= igb_request_msix(adapter
);
1418 /* fall back to MSI */
1419 igb_free_all_tx_resources(adapter
);
1420 igb_free_all_rx_resources(adapter
);
1422 igb_clear_interrupt_scheme(adapter
);
1423 err
= igb_init_interrupt_scheme(adapter
, false);
1427 igb_setup_all_tx_resources(adapter
);
1428 igb_setup_all_rx_resources(adapter
);
1429 igb_configure(adapter
);
1432 igb_assign_vector(adapter
->q_vector
[0], 0);
1434 if (adapter
->flags
& IGB_FLAG_HAS_MSI
) {
1435 err
= request_irq(pdev
->irq
, igb_intr_msi
, 0,
1436 netdev
->name
, adapter
);
1440 /* fall back to legacy interrupts */
1441 igb_reset_interrupt_capability(adapter
);
1442 adapter
->flags
&= ~IGB_FLAG_HAS_MSI
;
1445 err
= request_irq(pdev
->irq
, igb_intr
, IRQF_SHARED
,
1446 netdev
->name
, adapter
);
1449 dev_err(&pdev
->dev
, "Error %d getting interrupt\n",
1456 static void igb_free_irq(struct igb_adapter
*adapter
)
1458 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
) {
1461 free_irq(adapter
->msix_entries
[vector
++].vector
, adapter
);
1463 for (i
= 0; i
< adapter
->num_q_vectors
; i
++)
1464 free_irq(adapter
->msix_entries
[vector
++].vector
,
1465 adapter
->q_vector
[i
]);
1467 free_irq(adapter
->pdev
->irq
, adapter
);
1472 * igb_irq_disable - Mask off interrupt generation on the NIC
1473 * @adapter: board private structure
1475 static void igb_irq_disable(struct igb_adapter
*adapter
)
1477 struct e1000_hw
*hw
= &adapter
->hw
;
1479 /* we need to be careful when disabling interrupts. The VFs are also
1480 * mapped into these registers and so clearing the bits can cause
1481 * issues on the VF drivers so we only need to clear what we set
1483 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
) {
1484 u32 regval
= rd32(E1000_EIAM
);
1486 wr32(E1000_EIAM
, regval
& ~adapter
->eims_enable_mask
);
1487 wr32(E1000_EIMC
, adapter
->eims_enable_mask
);
1488 regval
= rd32(E1000_EIAC
);
1489 wr32(E1000_EIAC
, regval
& ~adapter
->eims_enable_mask
);
1493 wr32(E1000_IMC
, ~0);
1495 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
) {
1498 for (i
= 0; i
< adapter
->num_q_vectors
; i
++)
1499 synchronize_irq(adapter
->msix_entries
[i
].vector
);
1501 synchronize_irq(adapter
->pdev
->irq
);
1506 * igb_irq_enable - Enable default interrupt generation settings
1507 * @adapter: board private structure
1509 static void igb_irq_enable(struct igb_adapter
*adapter
)
1511 struct e1000_hw
*hw
= &adapter
->hw
;
1513 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
) {
1514 u32 ims
= E1000_IMS_LSC
| E1000_IMS_DOUTSYNC
| E1000_IMS_DRSTA
;
1515 u32 regval
= rd32(E1000_EIAC
);
1517 wr32(E1000_EIAC
, regval
| adapter
->eims_enable_mask
);
1518 regval
= rd32(E1000_EIAM
);
1519 wr32(E1000_EIAM
, regval
| adapter
->eims_enable_mask
);
1520 wr32(E1000_EIMS
, adapter
->eims_enable_mask
);
1521 if (adapter
->vfs_allocated_count
) {
1522 wr32(E1000_MBVFIMR
, 0xFF);
1523 ims
|= E1000_IMS_VMMB
;
1525 wr32(E1000_IMS
, ims
);
1527 wr32(E1000_IMS
, IMS_ENABLE_MASK
|
1529 wr32(E1000_IAM
, IMS_ENABLE_MASK
|
1534 static void igb_update_mng_vlan(struct igb_adapter
*adapter
)
1536 struct e1000_hw
*hw
= &adapter
->hw
;
1537 u16 pf_id
= adapter
->vfs_allocated_count
;
1538 u16 vid
= adapter
->hw
.mng_cookie
.vlan_id
;
1539 u16 old_vid
= adapter
->mng_vlan_id
;
1541 if (hw
->mng_cookie
.status
& E1000_MNG_DHCP_COOKIE_STATUS_VLAN
) {
1542 /* add VID to filter table */
1543 igb_vfta_set(hw
, vid
, pf_id
, true, true);
1544 adapter
->mng_vlan_id
= vid
;
1546 adapter
->mng_vlan_id
= IGB_MNG_VLAN_NONE
;
1549 if ((old_vid
!= (u16
)IGB_MNG_VLAN_NONE
) &&
1551 !test_bit(old_vid
, adapter
->active_vlans
)) {
1552 /* remove VID from filter table */
1553 igb_vfta_set(hw
, vid
, pf_id
, false, true);
1558 * igb_release_hw_control - release control of the h/w to f/w
1559 * @adapter: address of board private structure
1561 * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit.
1562 * For ASF and Pass Through versions of f/w this means that the
1563 * driver is no longer loaded.
1565 static void igb_release_hw_control(struct igb_adapter
*adapter
)
1567 struct e1000_hw
*hw
= &adapter
->hw
;
1570 /* Let firmware take over control of h/w */
1571 ctrl_ext
= rd32(E1000_CTRL_EXT
);
1572 wr32(E1000_CTRL_EXT
,
1573 ctrl_ext
& ~E1000_CTRL_EXT_DRV_LOAD
);
1577 * igb_get_hw_control - get control of the h/w from f/w
1578 * @adapter: address of board private structure
1580 * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
1581 * For ASF and Pass Through versions of f/w this means that
1582 * the driver is loaded.
1584 static void igb_get_hw_control(struct igb_adapter
*adapter
)
1586 struct e1000_hw
*hw
= &adapter
->hw
;
1589 /* Let firmware know the driver has taken over */
1590 ctrl_ext
= rd32(E1000_CTRL_EXT
);
1591 wr32(E1000_CTRL_EXT
,
1592 ctrl_ext
| E1000_CTRL_EXT_DRV_LOAD
);
1596 * igb_configure - configure the hardware for RX and TX
1597 * @adapter: private board structure
1599 static void igb_configure(struct igb_adapter
*adapter
)
1601 struct net_device
*netdev
= adapter
->netdev
;
1604 igb_get_hw_control(adapter
);
1605 igb_set_rx_mode(netdev
);
1607 igb_restore_vlan(adapter
);
1609 igb_setup_tctl(adapter
);
1610 igb_setup_mrqc(adapter
);
1611 igb_setup_rctl(adapter
);
1613 igb_configure_tx(adapter
);
1614 igb_configure_rx(adapter
);
1616 igb_rx_fifo_flush_82575(&adapter
->hw
);
1618 /* call igb_desc_unused which always leaves
1619 * at least 1 descriptor unused to make sure
1620 * next_to_use != next_to_clean
1622 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
1623 struct igb_ring
*ring
= adapter
->rx_ring
[i
];
1624 igb_alloc_rx_buffers(ring
, igb_desc_unused(ring
));
1629 * igb_power_up_link - Power up the phy/serdes link
1630 * @adapter: address of board private structure
1632 void igb_power_up_link(struct igb_adapter
*adapter
)
1634 igb_reset_phy(&adapter
->hw
);
1636 if (adapter
->hw
.phy
.media_type
== e1000_media_type_copper
)
1637 igb_power_up_phy_copper(&adapter
->hw
);
1639 igb_power_up_serdes_link_82575(&adapter
->hw
);
1641 igb_setup_link(&adapter
->hw
);
1645 * igb_power_down_link - Power down the phy/serdes link
1646 * @adapter: address of board private structure
1648 static void igb_power_down_link(struct igb_adapter
*adapter
)
1650 if (adapter
->hw
.phy
.media_type
== e1000_media_type_copper
)
1651 igb_power_down_phy_copper_82575(&adapter
->hw
);
1653 igb_shutdown_serdes_link_82575(&adapter
->hw
);
1657 * Detect and switch function for Media Auto Sense
1658 * @adapter: address of the board private structure
1660 static void igb_check_swap_media(struct igb_adapter
*adapter
)
1662 struct e1000_hw
*hw
= &adapter
->hw
;
1663 u32 ctrl_ext
, connsw
;
1664 bool swap_now
= false;
1666 ctrl_ext
= rd32(E1000_CTRL_EXT
);
1667 connsw
= rd32(E1000_CONNSW
);
1669 /* need to live swap if current media is copper and we have fiber/serdes
1673 if ((hw
->phy
.media_type
== e1000_media_type_copper
) &&
1674 (!(connsw
& E1000_CONNSW_AUTOSENSE_EN
))) {
1676 } else if (!(connsw
& E1000_CONNSW_SERDESD
)) {
1677 /* copper signal takes time to appear */
1678 if (adapter
->copper_tries
< 4) {
1679 adapter
->copper_tries
++;
1680 connsw
|= E1000_CONNSW_AUTOSENSE_CONF
;
1681 wr32(E1000_CONNSW
, connsw
);
1684 adapter
->copper_tries
= 0;
1685 if ((connsw
& E1000_CONNSW_PHYSD
) &&
1686 (!(connsw
& E1000_CONNSW_PHY_PDN
))) {
1688 connsw
&= ~E1000_CONNSW_AUTOSENSE_CONF
;
1689 wr32(E1000_CONNSW
, connsw
);
1697 switch (hw
->phy
.media_type
) {
1698 case e1000_media_type_copper
:
1699 netdev_info(adapter
->netdev
,
1700 "MAS: changing media to fiber/serdes\n");
1702 E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES
;
1703 adapter
->flags
|= IGB_FLAG_MEDIA_RESET
;
1704 adapter
->copper_tries
= 0;
1706 case e1000_media_type_internal_serdes
:
1707 case e1000_media_type_fiber
:
1708 netdev_info(adapter
->netdev
,
1709 "MAS: changing media to copper\n");
1711 ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES
;
1712 adapter
->flags
|= IGB_FLAG_MEDIA_RESET
;
1715 /* shouldn't get here during regular operation */
1716 netdev_err(adapter
->netdev
,
1717 "AMS: Invalid media type found, returning\n");
1720 wr32(E1000_CTRL_EXT
, ctrl_ext
);
1724 * igb_up - Open the interface and prepare it to handle traffic
1725 * @adapter: board private structure
1727 int igb_up(struct igb_adapter
*adapter
)
1729 struct e1000_hw
*hw
= &adapter
->hw
;
1732 /* hardware has been reset, we need to reload some things */
1733 igb_configure(adapter
);
1735 clear_bit(__IGB_DOWN
, &adapter
->state
);
1737 for (i
= 0; i
< adapter
->num_q_vectors
; i
++)
1738 napi_enable(&(adapter
->q_vector
[i
]->napi
));
1740 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
)
1741 igb_configure_msix(adapter
);
1743 igb_assign_vector(adapter
->q_vector
[0], 0);
1745 /* Clear any pending interrupts. */
1747 igb_irq_enable(adapter
);
1749 /* notify VFs that reset has been completed */
1750 if (adapter
->vfs_allocated_count
) {
1751 u32 reg_data
= rd32(E1000_CTRL_EXT
);
1753 reg_data
|= E1000_CTRL_EXT_PFRSTD
;
1754 wr32(E1000_CTRL_EXT
, reg_data
);
1757 netif_tx_start_all_queues(adapter
->netdev
);
1759 /* start the watchdog. */
1760 hw
->mac
.get_link_status
= 1;
1761 schedule_work(&adapter
->watchdog_task
);
1763 if ((adapter
->flags
& IGB_FLAG_EEE
) &&
1764 (!hw
->dev_spec
._82575
.eee_disable
))
1765 adapter
->eee_advert
= MDIO_EEE_100TX
| MDIO_EEE_1000T
;
1770 void igb_down(struct igb_adapter
*adapter
)
1772 struct net_device
*netdev
= adapter
->netdev
;
1773 struct e1000_hw
*hw
= &adapter
->hw
;
1777 /* signal that we're down so the interrupt handler does not
1778 * reschedule our watchdog timer
1780 set_bit(__IGB_DOWN
, &adapter
->state
);
1782 /* disable receives in the hardware */
1783 rctl
= rd32(E1000_RCTL
);
1784 wr32(E1000_RCTL
, rctl
& ~E1000_RCTL_EN
);
1785 /* flush and sleep below */
1787 netif_carrier_off(netdev
);
1788 netif_tx_stop_all_queues(netdev
);
1790 /* disable transmits in the hardware */
1791 tctl
= rd32(E1000_TCTL
);
1792 tctl
&= ~E1000_TCTL_EN
;
1793 wr32(E1000_TCTL
, tctl
);
1794 /* flush both disables and wait for them to finish */
1796 usleep_range(10000, 11000);
1798 igb_irq_disable(adapter
);
1800 adapter
->flags
&= ~IGB_FLAG_NEED_LINK_UPDATE
;
1802 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
1803 if (adapter
->q_vector
[i
]) {
1804 napi_synchronize(&adapter
->q_vector
[i
]->napi
);
1805 napi_disable(&adapter
->q_vector
[i
]->napi
);
1809 del_timer_sync(&adapter
->watchdog_timer
);
1810 del_timer_sync(&adapter
->phy_info_timer
);
1812 /* record the stats before reset*/
1813 spin_lock(&adapter
->stats64_lock
);
1814 igb_update_stats(adapter
, &adapter
->stats64
);
1815 spin_unlock(&adapter
->stats64_lock
);
1817 adapter
->link_speed
= 0;
1818 adapter
->link_duplex
= 0;
1820 if (!pci_channel_offline(adapter
->pdev
))
1823 /* clear VLAN promisc flag so VFTA will be updated if necessary */
1824 adapter
->flags
&= ~IGB_FLAG_VLAN_PROMISC
;
1826 igb_clean_all_tx_rings(adapter
);
1827 igb_clean_all_rx_rings(adapter
);
1828 #ifdef CONFIG_IGB_DCA
1830 /* since we reset the hardware DCA settings were cleared */
1831 igb_setup_dca(adapter
);
1835 void igb_reinit_locked(struct igb_adapter
*adapter
)
1837 WARN_ON(in_interrupt());
1838 while (test_and_set_bit(__IGB_RESETTING
, &adapter
->state
))
1839 usleep_range(1000, 2000);
1842 clear_bit(__IGB_RESETTING
, &adapter
->state
);
1845 /** igb_enable_mas - Media Autosense re-enable after swap
1847 * @adapter: adapter struct
1849 static void igb_enable_mas(struct igb_adapter
*adapter
)
1851 struct e1000_hw
*hw
= &adapter
->hw
;
1852 u32 connsw
= rd32(E1000_CONNSW
);
1854 /* configure for SerDes media detect */
1855 if ((hw
->phy
.media_type
== e1000_media_type_copper
) &&
1856 (!(connsw
& E1000_CONNSW_SERDESD
))) {
1857 connsw
|= E1000_CONNSW_ENRGSRC
;
1858 connsw
|= E1000_CONNSW_AUTOSENSE_EN
;
1859 wr32(E1000_CONNSW
, connsw
);
1864 void igb_reset(struct igb_adapter
*adapter
)
1866 struct pci_dev
*pdev
= adapter
->pdev
;
1867 struct e1000_hw
*hw
= &adapter
->hw
;
1868 struct e1000_mac_info
*mac
= &hw
->mac
;
1869 struct e1000_fc_info
*fc
= &hw
->fc
;
1872 /* Repartition Pba for greater than 9k mtu
1873 * To take effect CTRL.RST is required.
1875 switch (mac
->type
) {
1879 pba
= rd32(E1000_RXPBS
);
1880 pba
= igb_rxpbs_adjust_82580(pba
);
1883 pba
= rd32(E1000_RXPBS
);
1884 pba
&= E1000_RXPBS_SIZE_MASK_82576
;
1890 pba
= E1000_PBA_34K
;
1894 if (mac
->type
== e1000_82575
) {
1895 u32 min_rx_space
, min_tx_space
, needed_tx_space
;
1897 /* write Rx PBA so that hardware can report correct Tx PBA */
1898 wr32(E1000_PBA
, pba
);
1900 /* To maintain wire speed transmits, the Tx FIFO should be
1901 * large enough to accommodate two full transmit packets,
1902 * rounded up to the next 1KB and expressed in KB. Likewise,
1903 * the Rx FIFO should be large enough to accommodate at least
1904 * one full receive packet and is similarly rounded up and
1907 min_rx_space
= DIV_ROUND_UP(MAX_JUMBO_FRAME_SIZE
, 1024);
1909 /* The Tx FIFO also stores 16 bytes of information about the Tx
1910 * but don't include Ethernet FCS because hardware appends it.
1911 * We only need to round down to the nearest 512 byte block
1912 * count since the value we care about is 2 frames, not 1.
1914 min_tx_space
= adapter
->max_frame_size
;
1915 min_tx_space
+= sizeof(union e1000_adv_tx_desc
) - ETH_FCS_LEN
;
1916 min_tx_space
= DIV_ROUND_UP(min_tx_space
, 512);
1918 /* upper 16 bits has Tx packet buffer allocation size in KB */
1919 needed_tx_space
= min_tx_space
- (rd32(E1000_PBA
) >> 16);
1921 /* If current Tx allocation is less than the min Tx FIFO size,
1922 * and the min Tx FIFO size is less than the current Rx FIFO
1923 * allocation, take space away from current Rx allocation.
1925 if (needed_tx_space
< pba
) {
1926 pba
-= needed_tx_space
;
1928 /* if short on Rx space, Rx wins and must trump Tx
1931 if (pba
< min_rx_space
)
1935 /* adjust PBA for jumbo frames */
1936 wr32(E1000_PBA
, pba
);
1939 /* flow control settings
1940 * The high water mark must be low enough to fit one full frame
1941 * after transmitting the pause frame. As such we must have enough
1942 * space to allow for us to complete our current transmit and then
1943 * receive the frame that is in progress from the link partner.
1945 * - the full Rx FIFO size minus one full Tx plus one full Rx frame
1947 hwm
= (pba
<< 10) - (adapter
->max_frame_size
+ MAX_JUMBO_FRAME_SIZE
);
1949 fc
->high_water
= hwm
& 0xFFFFFFF0; /* 16-byte granularity */
1950 fc
->low_water
= fc
->high_water
- 16;
1951 fc
->pause_time
= 0xFFFF;
1953 fc
->current_mode
= fc
->requested_mode
;
1955 /* disable receive for all VFs and wait one second */
1956 if (adapter
->vfs_allocated_count
) {
1959 for (i
= 0 ; i
< adapter
->vfs_allocated_count
; i
++)
1960 adapter
->vf_data
[i
].flags
&= IGB_VF_FLAG_PF_SET_MAC
;
1962 /* ping all the active vfs to let them know we are going down */
1963 igb_ping_all_vfs(adapter
);
1965 /* disable transmits and receives */
1966 wr32(E1000_VFRE
, 0);
1967 wr32(E1000_VFTE
, 0);
1970 /* Allow time for pending master requests to run */
1971 hw
->mac
.ops
.reset_hw(hw
);
1974 if (adapter
->flags
& IGB_FLAG_MEDIA_RESET
) {
1975 /* need to resetup here after media swap */
1976 adapter
->ei
.get_invariants(hw
);
1977 adapter
->flags
&= ~IGB_FLAG_MEDIA_RESET
;
1979 if ((mac
->type
== e1000_82575
) &&
1980 (adapter
->flags
& IGB_FLAG_MAS_ENABLE
)) {
1981 igb_enable_mas(adapter
);
1983 if (hw
->mac
.ops
.init_hw(hw
))
1984 dev_err(&pdev
->dev
, "Hardware Error\n");
1986 /* Flow control settings reset on hardware reset, so guarantee flow
1987 * control is off when forcing speed.
1989 if (!hw
->mac
.autoneg
)
1990 igb_force_mac_fc(hw
);
1992 igb_init_dmac(adapter
, pba
);
1993 #ifdef CONFIG_IGB_HWMON
1994 /* Re-initialize the thermal sensor on i350 devices. */
1995 if (!test_bit(__IGB_DOWN
, &adapter
->state
)) {
1996 if (mac
->type
== e1000_i350
&& hw
->bus
.func
== 0) {
1997 /* If present, re-initialize the external thermal sensor
2001 mac
->ops
.init_thermal_sensor_thresh(hw
);
2005 /* Re-establish EEE setting */
2006 if (hw
->phy
.media_type
== e1000_media_type_copper
) {
2007 switch (mac
->type
) {
2011 igb_set_eee_i350(hw
, true, true);
2014 igb_set_eee_i354(hw
, true, true);
2020 if (!netif_running(adapter
->netdev
))
2021 igb_power_down_link(adapter
);
2023 igb_update_mng_vlan(adapter
);
2025 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
2026 wr32(E1000_VET
, ETHERNET_IEEE_VLAN_TYPE
);
2028 /* Re-enable PTP, where applicable. */
2029 igb_ptp_reset(adapter
);
2031 igb_get_phy_info(hw
);
2034 static netdev_features_t
igb_fix_features(struct net_device
*netdev
,
2035 netdev_features_t features
)
2037 /* Since there is no support for separate Rx/Tx vlan accel
2038 * enable/disable make sure Tx flag is always in same state as Rx.
2040 if (features
& NETIF_F_HW_VLAN_CTAG_RX
)
2041 features
|= NETIF_F_HW_VLAN_CTAG_TX
;
2043 features
&= ~NETIF_F_HW_VLAN_CTAG_TX
;
2048 static int igb_set_features(struct net_device
*netdev
,
2049 netdev_features_t features
)
2051 netdev_features_t changed
= netdev
->features
^ features
;
2052 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2054 if (changed
& NETIF_F_HW_VLAN_CTAG_RX
)
2055 igb_vlan_mode(netdev
, features
);
2057 if (!(changed
& (NETIF_F_RXALL
| NETIF_F_NTUPLE
)))
2060 netdev
->features
= features
;
2062 if (netif_running(netdev
))
2063 igb_reinit_locked(adapter
);
2070 static int igb_ndo_fdb_add(struct ndmsg
*ndm
, struct nlattr
*tb
[],
2071 struct net_device
*dev
,
2072 const unsigned char *addr
, u16 vid
,
2075 /* guarantee we can provide a unique filter for the unicast address */
2076 if (is_unicast_ether_addr(addr
) || is_link_local_ether_addr(addr
)) {
2077 struct igb_adapter
*adapter
= netdev_priv(dev
);
2078 struct e1000_hw
*hw
= &adapter
->hw
;
2079 int vfn
= adapter
->vfs_allocated_count
;
2080 int rar_entries
= hw
->mac
.rar_entry_count
- (vfn
+ 1);
2082 if (netdev_uc_count(dev
) >= rar_entries
)
2086 return ndo_dflt_fdb_add(ndm
, tb
, dev
, addr
, vid
, flags
);
2089 static const struct net_device_ops igb_netdev_ops
= {
2090 .ndo_open
= igb_open
,
2091 .ndo_stop
= igb_close
,
2092 .ndo_start_xmit
= igb_xmit_frame
,
2093 .ndo_get_stats64
= igb_get_stats64
,
2094 .ndo_set_rx_mode
= igb_set_rx_mode
,
2095 .ndo_set_mac_address
= igb_set_mac
,
2096 .ndo_change_mtu
= igb_change_mtu
,
2097 .ndo_do_ioctl
= igb_ioctl
,
2098 .ndo_tx_timeout
= igb_tx_timeout
,
2099 .ndo_validate_addr
= eth_validate_addr
,
2100 .ndo_vlan_rx_add_vid
= igb_vlan_rx_add_vid
,
2101 .ndo_vlan_rx_kill_vid
= igb_vlan_rx_kill_vid
,
2102 .ndo_set_vf_mac
= igb_ndo_set_vf_mac
,
2103 .ndo_set_vf_vlan
= igb_ndo_set_vf_vlan
,
2104 .ndo_set_vf_rate
= igb_ndo_set_vf_bw
,
2105 .ndo_set_vf_spoofchk
= igb_ndo_set_vf_spoofchk
,
2106 .ndo_get_vf_config
= igb_ndo_get_vf_config
,
2107 #ifdef CONFIG_NET_POLL_CONTROLLER
2108 .ndo_poll_controller
= igb_netpoll
,
2110 .ndo_fix_features
= igb_fix_features
,
2111 .ndo_set_features
= igb_set_features
,
2112 .ndo_fdb_add
= igb_ndo_fdb_add
,
2113 .ndo_features_check
= passthru_features_check
,
2117 * igb_set_fw_version - Configure version string for ethtool
2118 * @adapter: adapter struct
2120 void igb_set_fw_version(struct igb_adapter
*adapter
)
2122 struct e1000_hw
*hw
= &adapter
->hw
;
2123 struct e1000_fw_version fw
;
2125 igb_get_fw_version(hw
, &fw
);
2127 switch (hw
->mac
.type
) {
2130 if (!(igb_get_flash_presence_i210(hw
))) {
2131 snprintf(adapter
->fw_version
,
2132 sizeof(adapter
->fw_version
),
2134 fw
.invm_major
, fw
.invm_minor
,
2140 /* if option is rom valid, display its version too */
2142 snprintf(adapter
->fw_version
,
2143 sizeof(adapter
->fw_version
),
2144 "%d.%d, 0x%08x, %d.%d.%d",
2145 fw
.eep_major
, fw
.eep_minor
, fw
.etrack_id
,
2146 fw
.or_major
, fw
.or_build
, fw
.or_patch
);
2148 } else if (fw
.etrack_id
!= 0X0000) {
2149 snprintf(adapter
->fw_version
,
2150 sizeof(adapter
->fw_version
),
2152 fw
.eep_major
, fw
.eep_minor
, fw
.etrack_id
);
2154 snprintf(adapter
->fw_version
,
2155 sizeof(adapter
->fw_version
),
2157 fw
.eep_major
, fw
.eep_minor
, fw
.eep_build
);
2164 * igb_init_mas - init Media Autosense feature if enabled in the NVM
2166 * @adapter: adapter struct
2168 static void igb_init_mas(struct igb_adapter
*adapter
)
2170 struct e1000_hw
*hw
= &adapter
->hw
;
2173 hw
->nvm
.ops
.read(hw
, NVM_COMPAT
, 1, &eeprom_data
);
2174 switch (hw
->bus
.func
) {
2176 if (eeprom_data
& IGB_MAS_ENABLE_0
) {
2177 adapter
->flags
|= IGB_FLAG_MAS_ENABLE
;
2178 netdev_info(adapter
->netdev
,
2179 "MAS: Enabling Media Autosense for port %d\n",
2184 if (eeprom_data
& IGB_MAS_ENABLE_1
) {
2185 adapter
->flags
|= IGB_FLAG_MAS_ENABLE
;
2186 netdev_info(adapter
->netdev
,
2187 "MAS: Enabling Media Autosense for port %d\n",
2192 if (eeprom_data
& IGB_MAS_ENABLE_2
) {
2193 adapter
->flags
|= IGB_FLAG_MAS_ENABLE
;
2194 netdev_info(adapter
->netdev
,
2195 "MAS: Enabling Media Autosense for port %d\n",
2200 if (eeprom_data
& IGB_MAS_ENABLE_3
) {
2201 adapter
->flags
|= IGB_FLAG_MAS_ENABLE
;
2202 netdev_info(adapter
->netdev
,
2203 "MAS: Enabling Media Autosense for port %d\n",
2208 /* Shouldn't get here */
2209 netdev_err(adapter
->netdev
,
2210 "MAS: Invalid port configuration, returning\n");
2216 * igb_init_i2c - Init I2C interface
2217 * @adapter: pointer to adapter structure
2219 static s32
igb_init_i2c(struct igb_adapter
*adapter
)
2223 /* I2C interface supported on i350 devices */
2224 if (adapter
->hw
.mac
.type
!= e1000_i350
)
2227 /* Initialize the i2c bus which is controlled by the registers.
2228 * This bus will use the i2c_algo_bit structue that implements
2229 * the protocol through toggling of the 4 bits in the register.
2231 adapter
->i2c_adap
.owner
= THIS_MODULE
;
2232 adapter
->i2c_algo
= igb_i2c_algo
;
2233 adapter
->i2c_algo
.data
= adapter
;
2234 adapter
->i2c_adap
.algo_data
= &adapter
->i2c_algo
;
2235 adapter
->i2c_adap
.dev
.parent
= &adapter
->pdev
->dev
;
2236 strlcpy(adapter
->i2c_adap
.name
, "igb BB",
2237 sizeof(adapter
->i2c_adap
.name
));
2238 status
= i2c_bit_add_bus(&adapter
->i2c_adap
);
2243 * igb_probe - Device Initialization Routine
2244 * @pdev: PCI device information struct
2245 * @ent: entry in igb_pci_tbl
2247 * Returns 0 on success, negative on failure
2249 * igb_probe initializes an adapter identified by a pci_dev structure.
2250 * The OS initialization, configuring of the adapter private structure,
2251 * and a hardware reset occur.
2253 static int igb_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
2255 struct net_device
*netdev
;
2256 struct igb_adapter
*adapter
;
2257 struct e1000_hw
*hw
;
2258 u16 eeprom_data
= 0;
2260 static int global_quad_port_a
; /* global quad port a indication */
2261 const struct e1000_info
*ei
= igb_info_tbl
[ent
->driver_data
];
2262 int err
, pci_using_dac
;
2263 u8 part_str
[E1000_PBANUM_LENGTH
];
2265 /* Catch broken hardware that put the wrong VF device ID in
2266 * the PCIe SR-IOV capability.
2268 if (pdev
->is_virtfn
) {
2269 WARN(1, KERN_ERR
"%s (%hx:%hx) should not be a VF!\n",
2270 pci_name(pdev
), pdev
->vendor
, pdev
->device
);
2274 err
= pci_enable_device_mem(pdev
);
2279 err
= dma_set_mask_and_coherent(&pdev
->dev
, DMA_BIT_MASK(64));
2283 err
= dma_set_mask_and_coherent(&pdev
->dev
, DMA_BIT_MASK(32));
2286 "No usable DMA configuration, aborting\n");
2291 err
= pci_request_selected_regions(pdev
, pci_select_bars(pdev
,
2297 pci_enable_pcie_error_reporting(pdev
);
2299 pci_set_master(pdev
);
2300 pci_save_state(pdev
);
2303 netdev
= alloc_etherdev_mq(sizeof(struct igb_adapter
),
2306 goto err_alloc_etherdev
;
2308 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
2310 pci_set_drvdata(pdev
, netdev
);
2311 adapter
= netdev_priv(netdev
);
2312 adapter
->netdev
= netdev
;
2313 adapter
->pdev
= pdev
;
2316 adapter
->msg_enable
= netif_msg_init(debug
, DEFAULT_MSG_ENABLE
);
2319 adapter
->io_addr
= pci_iomap(pdev
, 0, 0);
2320 if (!adapter
->io_addr
)
2322 /* hw->hw_addr can be altered, we'll use adapter->io_addr for unmap */
2323 hw
->hw_addr
= adapter
->io_addr
;
2325 netdev
->netdev_ops
= &igb_netdev_ops
;
2326 igb_set_ethtool_ops(netdev
);
2327 netdev
->watchdog_timeo
= 5 * HZ
;
2329 strncpy(netdev
->name
, pci_name(pdev
), sizeof(netdev
->name
) - 1);
2331 netdev
->mem_start
= pci_resource_start(pdev
, 0);
2332 netdev
->mem_end
= pci_resource_end(pdev
, 0);
2334 /* PCI config space info */
2335 hw
->vendor_id
= pdev
->vendor
;
2336 hw
->device_id
= pdev
->device
;
2337 hw
->revision_id
= pdev
->revision
;
2338 hw
->subsystem_vendor_id
= pdev
->subsystem_vendor
;
2339 hw
->subsystem_device_id
= pdev
->subsystem_device
;
2341 /* Copy the default MAC, PHY and NVM function pointers */
2342 memcpy(&hw
->mac
.ops
, ei
->mac_ops
, sizeof(hw
->mac
.ops
));
2343 memcpy(&hw
->phy
.ops
, ei
->phy_ops
, sizeof(hw
->phy
.ops
));
2344 memcpy(&hw
->nvm
.ops
, ei
->nvm_ops
, sizeof(hw
->nvm
.ops
));
2345 /* Initialize skew-specific constants */
2346 err
= ei
->get_invariants(hw
);
2350 /* setup the private structure */
2351 err
= igb_sw_init(adapter
);
2355 igb_get_bus_info_pcie(hw
);
2357 hw
->phy
.autoneg_wait_to_complete
= false;
2359 /* Copper options */
2360 if (hw
->phy
.media_type
== e1000_media_type_copper
) {
2361 hw
->phy
.mdix
= AUTO_ALL_MODES
;
2362 hw
->phy
.disable_polarity_correction
= false;
2363 hw
->phy
.ms_type
= e1000_ms_hw_default
;
2366 if (igb_check_reset_block(hw
))
2367 dev_info(&pdev
->dev
,
2368 "PHY reset is blocked due to SOL/IDER session.\n");
2370 /* features is initialized to 0 in allocation, it might have bits
2371 * set by igb_sw_init so we should use an or instead of an
2374 netdev
->features
|= NETIF_F_SG
|
2381 NETIF_F_HW_VLAN_CTAG_RX
|
2382 NETIF_F_HW_VLAN_CTAG_TX
;
2384 /* copy netdev features into list of user selectable features */
2385 netdev
->hw_features
|= netdev
->features
;
2386 netdev
->hw_features
|= NETIF_F_RXALL
;
2388 /* set this bit last since it cannot be part of hw_features */
2389 netdev
->features
|= NETIF_F_HW_VLAN_CTAG_FILTER
;
2391 netdev
->vlan_features
|= NETIF_F_TSO
|
2397 netdev
->priv_flags
|= IFF_SUPP_NOFCS
;
2399 if (pci_using_dac
) {
2400 netdev
->features
|= NETIF_F_HIGHDMA
;
2401 netdev
->vlan_features
|= NETIF_F_HIGHDMA
;
2404 if (hw
->mac
.type
>= e1000_82576
) {
2405 netdev
->hw_features
|= NETIF_F_SCTP_CRC
;
2406 netdev
->features
|= NETIF_F_SCTP_CRC
;
2409 netdev
->priv_flags
|= IFF_UNICAST_FLT
;
2411 adapter
->en_mng_pt
= igb_enable_mng_pass_thru(hw
);
2413 /* before reading the NVM, reset the controller to put the device in a
2414 * known good starting state
2416 hw
->mac
.ops
.reset_hw(hw
);
2418 /* make sure the NVM is good , i211/i210 parts can have special NVM
2419 * that doesn't contain a checksum
2421 switch (hw
->mac
.type
) {
2424 if (igb_get_flash_presence_i210(hw
)) {
2425 if (hw
->nvm
.ops
.validate(hw
) < 0) {
2427 "The NVM Checksum Is Not Valid\n");
2434 if (hw
->nvm
.ops
.validate(hw
) < 0) {
2435 dev_err(&pdev
->dev
, "The NVM Checksum Is Not Valid\n");
2442 /* copy the MAC address out of the NVM */
2443 if (hw
->mac
.ops
.read_mac_addr(hw
))
2444 dev_err(&pdev
->dev
, "NVM Read Error\n");
2446 memcpy(netdev
->dev_addr
, hw
->mac
.addr
, netdev
->addr_len
);
2448 if (!is_valid_ether_addr(netdev
->dev_addr
)) {
2449 dev_err(&pdev
->dev
, "Invalid MAC Address\n");
2454 /* get firmware version for ethtool -i */
2455 igb_set_fw_version(adapter
);
2457 /* configure RXPBSIZE and TXPBSIZE */
2458 if (hw
->mac
.type
== e1000_i210
) {
2459 wr32(E1000_RXPBS
, I210_RXPBSIZE_DEFAULT
);
2460 wr32(E1000_TXPBS
, I210_TXPBSIZE_DEFAULT
);
2463 setup_timer(&adapter
->watchdog_timer
, igb_watchdog
,
2464 (unsigned long) adapter
);
2465 setup_timer(&adapter
->phy_info_timer
, igb_update_phy_info
,
2466 (unsigned long) adapter
);
2468 INIT_WORK(&adapter
->reset_task
, igb_reset_task
);
2469 INIT_WORK(&adapter
->watchdog_task
, igb_watchdog_task
);
2471 /* Initialize link properties that are user-changeable */
2472 adapter
->fc_autoneg
= true;
2473 hw
->mac
.autoneg
= true;
2474 hw
->phy
.autoneg_advertised
= 0x2f;
2476 hw
->fc
.requested_mode
= e1000_fc_default
;
2477 hw
->fc
.current_mode
= e1000_fc_default
;
2479 igb_validate_mdi_setting(hw
);
2481 /* By default, support wake on port A */
2482 if (hw
->bus
.func
== 0)
2483 adapter
->flags
|= IGB_FLAG_WOL_SUPPORTED
;
2485 /* Check the NVM for wake support on non-port A ports */
2486 if (hw
->mac
.type
>= e1000_82580
)
2487 hw
->nvm
.ops
.read(hw
, NVM_INIT_CONTROL3_PORT_A
+
2488 NVM_82580_LAN_FUNC_OFFSET(hw
->bus
.func
), 1,
2490 else if (hw
->bus
.func
== 1)
2491 hw
->nvm
.ops
.read(hw
, NVM_INIT_CONTROL3_PORT_B
, 1, &eeprom_data
);
2493 if (eeprom_data
& IGB_EEPROM_APME
)
2494 adapter
->flags
|= IGB_FLAG_WOL_SUPPORTED
;
2496 /* now that we have the eeprom settings, apply the special cases where
2497 * the eeprom may be wrong or the board simply won't support wake on
2498 * lan on a particular port
2500 switch (pdev
->device
) {
2501 case E1000_DEV_ID_82575GB_QUAD_COPPER
:
2502 adapter
->flags
&= ~IGB_FLAG_WOL_SUPPORTED
;
2504 case E1000_DEV_ID_82575EB_FIBER_SERDES
:
2505 case E1000_DEV_ID_82576_FIBER
:
2506 case E1000_DEV_ID_82576_SERDES
:
2507 /* Wake events only supported on port A for dual fiber
2508 * regardless of eeprom setting
2510 if (rd32(E1000_STATUS
) & E1000_STATUS_FUNC_1
)
2511 adapter
->flags
&= ~IGB_FLAG_WOL_SUPPORTED
;
2513 case E1000_DEV_ID_82576_QUAD_COPPER
:
2514 case E1000_DEV_ID_82576_QUAD_COPPER_ET2
:
2515 /* if quad port adapter, disable WoL on all but port A */
2516 if (global_quad_port_a
!= 0)
2517 adapter
->flags
&= ~IGB_FLAG_WOL_SUPPORTED
;
2519 adapter
->flags
|= IGB_FLAG_QUAD_PORT_A
;
2520 /* Reset for multiple quad port adapters */
2521 if (++global_quad_port_a
== 4)
2522 global_quad_port_a
= 0;
2525 /* If the device can't wake, don't set software support */
2526 if (!device_can_wakeup(&adapter
->pdev
->dev
))
2527 adapter
->flags
&= ~IGB_FLAG_WOL_SUPPORTED
;
2530 /* initialize the wol settings based on the eeprom settings */
2531 if (adapter
->flags
& IGB_FLAG_WOL_SUPPORTED
)
2532 adapter
->wol
|= E1000_WUFC_MAG
;
2534 /* Some vendors want WoL disabled by default, but still supported */
2535 if ((hw
->mac
.type
== e1000_i350
) &&
2536 (pdev
->subsystem_vendor
== PCI_VENDOR_ID_HP
)) {
2537 adapter
->flags
|= IGB_FLAG_WOL_SUPPORTED
;
2541 /* Some vendors want the ability to Use the EEPROM setting as
2542 * enable/disable only, and not for capability
2544 if (((hw
->mac
.type
== e1000_i350
) ||
2545 (hw
->mac
.type
== e1000_i354
)) &&
2546 (pdev
->subsystem_vendor
== PCI_VENDOR_ID_DELL
)) {
2547 adapter
->flags
|= IGB_FLAG_WOL_SUPPORTED
;
2550 if (hw
->mac
.type
== e1000_i350
) {
2551 if (((pdev
->subsystem_device
== 0x5001) ||
2552 (pdev
->subsystem_device
== 0x5002)) &&
2553 (hw
->bus
.func
== 0)) {
2554 adapter
->flags
|= IGB_FLAG_WOL_SUPPORTED
;
2557 if (pdev
->subsystem_device
== 0x1F52)
2558 adapter
->flags
|= IGB_FLAG_WOL_SUPPORTED
;
2561 device_set_wakeup_enable(&adapter
->pdev
->dev
,
2562 adapter
->flags
& IGB_FLAG_WOL_SUPPORTED
);
2564 /* reset the hardware with the new settings */
2567 /* Init the I2C interface */
2568 err
= igb_init_i2c(adapter
);
2570 dev_err(&pdev
->dev
, "failed to init i2c interface\n");
2574 /* let the f/w know that the h/w is now under the control of the
2577 igb_get_hw_control(adapter
);
2579 strcpy(netdev
->name
, "eth%d");
2580 err
= register_netdev(netdev
);
2584 /* carrier off reporting is important to ethtool even BEFORE open */
2585 netif_carrier_off(netdev
);
2587 #ifdef CONFIG_IGB_DCA
2588 if (dca_add_requester(&pdev
->dev
) == 0) {
2589 adapter
->flags
|= IGB_FLAG_DCA_ENABLED
;
2590 dev_info(&pdev
->dev
, "DCA enabled\n");
2591 igb_setup_dca(adapter
);
2595 #ifdef CONFIG_IGB_HWMON
2596 /* Initialize the thermal sensor on i350 devices. */
2597 if (hw
->mac
.type
== e1000_i350
&& hw
->bus
.func
== 0) {
2600 /* Read the NVM to determine if this i350 device supports an
2601 * external thermal sensor.
2603 hw
->nvm
.ops
.read(hw
, NVM_ETS_CFG
, 1, &ets_word
);
2604 if (ets_word
!= 0x0000 && ets_word
!= 0xFFFF)
2605 adapter
->ets
= true;
2607 adapter
->ets
= false;
2608 if (igb_sysfs_init(adapter
))
2610 "failed to allocate sysfs resources\n");
2612 adapter
->ets
= false;
2615 /* Check if Media Autosense is enabled */
2617 if (hw
->dev_spec
._82575
.mas_capable
)
2618 igb_init_mas(adapter
);
2620 /* do hw tstamp init after resetting */
2621 igb_ptp_init(adapter
);
2623 dev_info(&pdev
->dev
, "Intel(R) Gigabit Ethernet Network Connection\n");
2624 /* print bus type/speed/width info, not applicable to i354 */
2625 if (hw
->mac
.type
!= e1000_i354
) {
2626 dev_info(&pdev
->dev
, "%s: (PCIe:%s:%s) %pM\n",
2628 ((hw
->bus
.speed
== e1000_bus_speed_2500
) ? "2.5Gb/s" :
2629 (hw
->bus
.speed
== e1000_bus_speed_5000
) ? "5.0Gb/s" :
2631 ((hw
->bus
.width
== e1000_bus_width_pcie_x4
) ?
2633 (hw
->bus
.width
== e1000_bus_width_pcie_x2
) ?
2635 (hw
->bus
.width
== e1000_bus_width_pcie_x1
) ?
2636 "Width x1" : "unknown"), netdev
->dev_addr
);
2639 if ((hw
->mac
.type
>= e1000_i210
||
2640 igb_get_flash_presence_i210(hw
))) {
2641 ret_val
= igb_read_part_string(hw
, part_str
,
2642 E1000_PBANUM_LENGTH
);
2644 ret_val
= -E1000_ERR_INVM_VALUE_NOT_FOUND
;
2648 strcpy(part_str
, "Unknown");
2649 dev_info(&pdev
->dev
, "%s: PBA No: %s\n", netdev
->name
, part_str
);
2650 dev_info(&pdev
->dev
,
2651 "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
2652 (adapter
->flags
& IGB_FLAG_HAS_MSIX
) ? "MSI-X" :
2653 (adapter
->flags
& IGB_FLAG_HAS_MSI
) ? "MSI" : "legacy",
2654 adapter
->num_rx_queues
, adapter
->num_tx_queues
);
2655 if (hw
->phy
.media_type
== e1000_media_type_copper
) {
2656 switch (hw
->mac
.type
) {
2660 /* Enable EEE for internal copper PHY devices */
2661 err
= igb_set_eee_i350(hw
, true, true);
2663 (!hw
->dev_spec
._82575
.eee_disable
)) {
2664 adapter
->eee_advert
=
2665 MDIO_EEE_100TX
| MDIO_EEE_1000T
;
2666 adapter
->flags
|= IGB_FLAG_EEE
;
2670 if ((rd32(E1000_CTRL_EXT
) &
2671 E1000_CTRL_EXT_LINK_MODE_SGMII
)) {
2672 err
= igb_set_eee_i354(hw
, true, true);
2674 (!hw
->dev_spec
._82575
.eee_disable
)) {
2675 adapter
->eee_advert
=
2676 MDIO_EEE_100TX
| MDIO_EEE_1000T
;
2677 adapter
->flags
|= IGB_FLAG_EEE
;
2685 pm_runtime_put_noidle(&pdev
->dev
);
2689 igb_release_hw_control(adapter
);
2690 memset(&adapter
->i2c_adap
, 0, sizeof(adapter
->i2c_adap
));
2692 if (!igb_check_reset_block(hw
))
2695 if (hw
->flash_address
)
2696 iounmap(hw
->flash_address
);
2698 kfree(adapter
->shadow_vfta
);
2699 igb_clear_interrupt_scheme(adapter
);
2700 #ifdef CONFIG_PCI_IOV
2701 igb_disable_sriov(pdev
);
2703 pci_iounmap(pdev
, adapter
->io_addr
);
2705 free_netdev(netdev
);
2707 pci_release_selected_regions(pdev
,
2708 pci_select_bars(pdev
, IORESOURCE_MEM
));
2711 pci_disable_device(pdev
);
2715 #ifdef CONFIG_PCI_IOV
2716 static int igb_disable_sriov(struct pci_dev
*pdev
)
2718 struct net_device
*netdev
= pci_get_drvdata(pdev
);
2719 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2720 struct e1000_hw
*hw
= &adapter
->hw
;
2722 /* reclaim resources allocated to VFs */
2723 if (adapter
->vf_data
) {
2724 /* disable iov and allow time for transactions to clear */
2725 if (pci_vfs_assigned(pdev
)) {
2726 dev_warn(&pdev
->dev
,
2727 "Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated\n");
2730 pci_disable_sriov(pdev
);
2734 kfree(adapter
->vf_data
);
2735 adapter
->vf_data
= NULL
;
2736 adapter
->vfs_allocated_count
= 0;
2737 wr32(E1000_IOVCTL
, E1000_IOVCTL_REUSE_VFQ
);
2740 dev_info(&pdev
->dev
, "IOV Disabled\n");
2742 /* Re-enable DMA Coalescing flag since IOV is turned off */
2743 adapter
->flags
|= IGB_FLAG_DMAC
;
2749 static int igb_enable_sriov(struct pci_dev
*pdev
, int num_vfs
)
2751 struct net_device
*netdev
= pci_get_drvdata(pdev
);
2752 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2753 int old_vfs
= pci_num_vf(pdev
);
2757 if (!(adapter
->flags
& IGB_FLAG_HAS_MSIX
) || num_vfs
> 7) {
2765 dev_info(&pdev
->dev
, "%d pre-allocated VFs found - override max_vfs setting of %d\n",
2767 adapter
->vfs_allocated_count
= old_vfs
;
2769 adapter
->vfs_allocated_count
= num_vfs
;
2771 adapter
->vf_data
= kcalloc(adapter
->vfs_allocated_count
,
2772 sizeof(struct vf_data_storage
), GFP_KERNEL
);
2774 /* if allocation failed then we do not support SR-IOV */
2775 if (!adapter
->vf_data
) {
2776 adapter
->vfs_allocated_count
= 0;
2778 "Unable to allocate memory for VF Data Storage\n");
2783 /* only call pci_enable_sriov() if no VFs are allocated already */
2785 err
= pci_enable_sriov(pdev
, adapter
->vfs_allocated_count
);
2789 dev_info(&pdev
->dev
, "%d VFs allocated\n",
2790 adapter
->vfs_allocated_count
);
2791 for (i
= 0; i
< adapter
->vfs_allocated_count
; i
++)
2792 igb_vf_configure(adapter
, i
);
2794 /* DMA Coalescing is not supported in IOV mode. */
2795 adapter
->flags
&= ~IGB_FLAG_DMAC
;
2799 kfree(adapter
->vf_data
);
2800 adapter
->vf_data
= NULL
;
2801 adapter
->vfs_allocated_count
= 0;
2808 * igb_remove_i2c - Cleanup I2C interface
2809 * @adapter: pointer to adapter structure
2811 static void igb_remove_i2c(struct igb_adapter
*adapter
)
2813 /* free the adapter bus structure */
2814 i2c_del_adapter(&adapter
->i2c_adap
);
2818 * igb_remove - Device Removal Routine
2819 * @pdev: PCI device information struct
2821 * igb_remove is called by the PCI subsystem to alert the driver
2822 * that it should release a PCI device. The could be caused by a
2823 * Hot-Plug event, or because the driver is going to be removed from
2826 static void igb_remove(struct pci_dev
*pdev
)
2828 struct net_device
*netdev
= pci_get_drvdata(pdev
);
2829 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2830 struct e1000_hw
*hw
= &adapter
->hw
;
2832 pm_runtime_get_noresume(&pdev
->dev
);
2833 #ifdef CONFIG_IGB_HWMON
2834 igb_sysfs_exit(adapter
);
2836 igb_remove_i2c(adapter
);
2837 igb_ptp_stop(adapter
);
2838 /* The watchdog timer may be rescheduled, so explicitly
2839 * disable watchdog from being rescheduled.
2841 set_bit(__IGB_DOWN
, &adapter
->state
);
2842 del_timer_sync(&adapter
->watchdog_timer
);
2843 del_timer_sync(&adapter
->phy_info_timer
);
2845 cancel_work_sync(&adapter
->reset_task
);
2846 cancel_work_sync(&adapter
->watchdog_task
);
2848 #ifdef CONFIG_IGB_DCA
2849 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
) {
2850 dev_info(&pdev
->dev
, "DCA disabled\n");
2851 dca_remove_requester(&pdev
->dev
);
2852 adapter
->flags
&= ~IGB_FLAG_DCA_ENABLED
;
2853 wr32(E1000_DCA_CTRL
, E1000_DCA_CTRL_DCA_MODE_DISABLE
);
2857 /* Release control of h/w to f/w. If f/w is AMT enabled, this
2858 * would have already happened in close and is redundant.
2860 igb_release_hw_control(adapter
);
2862 #ifdef CONFIG_PCI_IOV
2863 igb_disable_sriov(pdev
);
2866 unregister_netdev(netdev
);
2868 igb_clear_interrupt_scheme(adapter
);
2870 pci_iounmap(pdev
, adapter
->io_addr
);
2871 if (hw
->flash_address
)
2872 iounmap(hw
->flash_address
);
2873 pci_release_selected_regions(pdev
,
2874 pci_select_bars(pdev
, IORESOURCE_MEM
));
2876 kfree(adapter
->shadow_vfta
);
2877 free_netdev(netdev
);
2879 pci_disable_pcie_error_reporting(pdev
);
2881 pci_disable_device(pdev
);
2885 * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
2886 * @adapter: board private structure to initialize
2888 * This function initializes the vf specific data storage and then attempts to
2889 * allocate the VFs. The reason for ordering it this way is because it is much
2890 * mor expensive time wise to disable SR-IOV than it is to allocate and free
2891 * the memory for the VFs.
2893 static void igb_probe_vfs(struct igb_adapter
*adapter
)
2895 #ifdef CONFIG_PCI_IOV
2896 struct pci_dev
*pdev
= adapter
->pdev
;
2897 struct e1000_hw
*hw
= &adapter
->hw
;
2899 /* Virtualization features not supported on i210 family. */
2900 if ((hw
->mac
.type
== e1000_i210
) || (hw
->mac
.type
== e1000_i211
))
2903 /* Of the below we really only want the effect of getting
2904 * IGB_FLAG_HAS_MSIX set (if available), without which
2905 * igb_enable_sriov() has no effect.
2907 igb_set_interrupt_capability(adapter
, true);
2908 igb_reset_interrupt_capability(adapter
);
2910 pci_sriov_set_totalvfs(pdev
, 7);
2911 igb_enable_sriov(pdev
, max_vfs
);
2913 #endif /* CONFIG_PCI_IOV */
2916 static void igb_init_queue_configuration(struct igb_adapter
*adapter
)
2918 struct e1000_hw
*hw
= &adapter
->hw
;
2921 /* Determine the maximum number of RSS queues supported. */
2922 switch (hw
->mac
.type
) {
2924 max_rss_queues
= IGB_MAX_RX_QUEUES_I211
;
2928 max_rss_queues
= IGB_MAX_RX_QUEUES_82575
;
2931 /* I350 cannot do RSS and SR-IOV at the same time */
2932 if (!!adapter
->vfs_allocated_count
) {
2938 if (!!adapter
->vfs_allocated_count
) {
2946 max_rss_queues
= IGB_MAX_RX_QUEUES
;
2950 adapter
->rss_queues
= min_t(u32
, max_rss_queues
, num_online_cpus());
2952 igb_set_flag_queue_pairs(adapter
, max_rss_queues
);
2955 void igb_set_flag_queue_pairs(struct igb_adapter
*adapter
,
2956 const u32 max_rss_queues
)
2958 struct e1000_hw
*hw
= &adapter
->hw
;
2960 /* Determine if we need to pair queues. */
2961 switch (hw
->mac
.type
) {
2964 /* Device supports enough interrupts without queue pairing. */
2972 /* If rss_queues > half of max_rss_queues, pair the queues in
2973 * order to conserve interrupts due to limited supply.
2975 if (adapter
->rss_queues
> (max_rss_queues
/ 2))
2976 adapter
->flags
|= IGB_FLAG_QUEUE_PAIRS
;
2978 adapter
->flags
&= ~IGB_FLAG_QUEUE_PAIRS
;
2984 * igb_sw_init - Initialize general software structures (struct igb_adapter)
2985 * @adapter: board private structure to initialize
2987 * igb_sw_init initializes the Adapter private data structure.
2988 * Fields are initialized based on PCI device information and
2989 * OS network device settings (MTU size).
2991 static int igb_sw_init(struct igb_adapter
*adapter
)
2993 struct e1000_hw
*hw
= &adapter
->hw
;
2994 struct net_device
*netdev
= adapter
->netdev
;
2995 struct pci_dev
*pdev
= adapter
->pdev
;
2997 pci_read_config_word(pdev
, PCI_COMMAND
, &hw
->bus
.pci_cmd_word
);
2999 /* set default ring sizes */
3000 adapter
->tx_ring_count
= IGB_DEFAULT_TXD
;
3001 adapter
->rx_ring_count
= IGB_DEFAULT_RXD
;
3003 /* set default ITR values */
3004 adapter
->rx_itr_setting
= IGB_DEFAULT_ITR
;
3005 adapter
->tx_itr_setting
= IGB_DEFAULT_ITR
;
3007 /* set default work limits */
3008 adapter
->tx_work_limit
= IGB_DEFAULT_TX_WORK
;
3010 adapter
->max_frame_size
= netdev
->mtu
+ ETH_HLEN
+ ETH_FCS_LEN
+
3012 adapter
->min_frame_size
= ETH_ZLEN
+ ETH_FCS_LEN
;
3014 spin_lock_init(&adapter
->stats64_lock
);
3015 #ifdef CONFIG_PCI_IOV
3016 switch (hw
->mac
.type
) {
3020 dev_warn(&pdev
->dev
,
3021 "Maximum of 7 VFs per PF, using max\n");
3022 max_vfs
= adapter
->vfs_allocated_count
= 7;
3024 adapter
->vfs_allocated_count
= max_vfs
;
3025 if (adapter
->vfs_allocated_count
)
3026 dev_warn(&pdev
->dev
,
3027 "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n");
3032 #endif /* CONFIG_PCI_IOV */
3034 /* Assume MSI-X interrupts, will be checked during IRQ allocation */
3035 adapter
->flags
|= IGB_FLAG_HAS_MSIX
;
3037 igb_probe_vfs(adapter
);
3039 igb_init_queue_configuration(adapter
);
3041 /* Setup and initialize a copy of the hw vlan table array */
3042 adapter
->shadow_vfta
= kcalloc(E1000_VLAN_FILTER_TBL_SIZE
, sizeof(u32
),
3045 /* This call may decrease the number of queues */
3046 if (igb_init_interrupt_scheme(adapter
, true)) {
3047 dev_err(&pdev
->dev
, "Unable to allocate memory for queues\n");
3051 /* Explicitly disable IRQ since the NIC can be in any state. */
3052 igb_irq_disable(adapter
);
3054 if (hw
->mac
.type
>= e1000_i350
)
3055 adapter
->flags
&= ~IGB_FLAG_DMAC
;
3057 set_bit(__IGB_DOWN
, &adapter
->state
);
3062 * igb_open - Called when a network interface is made active
3063 * @netdev: network interface device structure
3065 * Returns 0 on success, negative value on failure
3067 * The open entry point is called when a network interface is made
3068 * active by the system (IFF_UP). At this point all resources needed
3069 * for transmit and receive operations are allocated, the interrupt
3070 * handler is registered with the OS, the watchdog timer is started,
3071 * and the stack is notified that the interface is ready.
3073 static int __igb_open(struct net_device
*netdev
, bool resuming
)
3075 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3076 struct e1000_hw
*hw
= &adapter
->hw
;
3077 struct pci_dev
*pdev
= adapter
->pdev
;
3081 /* disallow open during test */
3082 if (test_bit(__IGB_TESTING
, &adapter
->state
)) {
3088 pm_runtime_get_sync(&pdev
->dev
);
3090 netif_carrier_off(netdev
);
3092 /* allocate transmit descriptors */
3093 err
= igb_setup_all_tx_resources(adapter
);
3097 /* allocate receive descriptors */
3098 err
= igb_setup_all_rx_resources(adapter
);
3102 igb_power_up_link(adapter
);
3104 /* before we allocate an interrupt, we must be ready to handle it.
3105 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
3106 * as soon as we call pci_request_irq, so we have to setup our
3107 * clean_rx handler before we do so.
3109 igb_configure(adapter
);
3111 err
= igb_request_irq(adapter
);
3115 /* Notify the stack of the actual queue counts. */
3116 err
= netif_set_real_num_tx_queues(adapter
->netdev
,
3117 adapter
->num_tx_queues
);
3119 goto err_set_queues
;
3121 err
= netif_set_real_num_rx_queues(adapter
->netdev
,
3122 adapter
->num_rx_queues
);
3124 goto err_set_queues
;
3126 /* From here on the code is the same as igb_up() */
3127 clear_bit(__IGB_DOWN
, &adapter
->state
);
3129 for (i
= 0; i
< adapter
->num_q_vectors
; i
++)
3130 napi_enable(&(adapter
->q_vector
[i
]->napi
));
3132 /* Clear any pending interrupts. */
3135 igb_irq_enable(adapter
);
3137 /* notify VFs that reset has been completed */
3138 if (adapter
->vfs_allocated_count
) {
3139 u32 reg_data
= rd32(E1000_CTRL_EXT
);
3141 reg_data
|= E1000_CTRL_EXT_PFRSTD
;
3142 wr32(E1000_CTRL_EXT
, reg_data
);
3145 netif_tx_start_all_queues(netdev
);
3148 pm_runtime_put(&pdev
->dev
);
3150 /* start the watchdog. */
3151 hw
->mac
.get_link_status
= 1;
3152 schedule_work(&adapter
->watchdog_task
);
3157 igb_free_irq(adapter
);
3159 igb_release_hw_control(adapter
);
3160 igb_power_down_link(adapter
);
3161 igb_free_all_rx_resources(adapter
);
3163 igb_free_all_tx_resources(adapter
);
3167 pm_runtime_put(&pdev
->dev
);
3172 static int igb_open(struct net_device
*netdev
)
3174 return __igb_open(netdev
, false);
3178 * igb_close - Disables a network interface
3179 * @netdev: network interface device structure
3181 * Returns 0, this is not allowed to fail
3183 * The close entry point is called when an interface is de-activated
3184 * by the OS. The hardware is still under the driver's control, but
3185 * needs to be disabled. A global MAC reset is issued to stop the
3186 * hardware, and all transmit and receive resources are freed.
3188 static int __igb_close(struct net_device
*netdev
, bool suspending
)
3190 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3191 struct pci_dev
*pdev
= adapter
->pdev
;
3193 WARN_ON(test_bit(__IGB_RESETTING
, &adapter
->state
));
3196 pm_runtime_get_sync(&pdev
->dev
);
3199 igb_free_irq(adapter
);
3201 igb_free_all_tx_resources(adapter
);
3202 igb_free_all_rx_resources(adapter
);
3205 pm_runtime_put_sync(&pdev
->dev
);
3209 static int igb_close(struct net_device
*netdev
)
3211 return __igb_close(netdev
, false);
3215 * igb_setup_tx_resources - allocate Tx resources (Descriptors)
3216 * @tx_ring: tx descriptor ring (for a specific queue) to setup
3218 * Return 0 on success, negative on failure
3220 int igb_setup_tx_resources(struct igb_ring
*tx_ring
)
3222 struct device
*dev
= tx_ring
->dev
;
3225 size
= sizeof(struct igb_tx_buffer
) * tx_ring
->count
;
3227 tx_ring
->tx_buffer_info
= vzalloc(size
);
3228 if (!tx_ring
->tx_buffer_info
)
3231 /* round up to nearest 4K */
3232 tx_ring
->size
= tx_ring
->count
* sizeof(union e1000_adv_tx_desc
);
3233 tx_ring
->size
= ALIGN(tx_ring
->size
, 4096);
3235 tx_ring
->desc
= dma_alloc_coherent(dev
, tx_ring
->size
,
3236 &tx_ring
->dma
, GFP_KERNEL
);
3240 tx_ring
->next_to_use
= 0;
3241 tx_ring
->next_to_clean
= 0;
3246 vfree(tx_ring
->tx_buffer_info
);
3247 tx_ring
->tx_buffer_info
= NULL
;
3248 dev_err(dev
, "Unable to allocate memory for the Tx descriptor ring\n");
3253 * igb_setup_all_tx_resources - wrapper to allocate Tx resources
3254 * (Descriptors) for all queues
3255 * @adapter: board private structure
3257 * Return 0 on success, negative on failure
3259 static int igb_setup_all_tx_resources(struct igb_adapter
*adapter
)
3261 struct pci_dev
*pdev
= adapter
->pdev
;
3264 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
3265 err
= igb_setup_tx_resources(adapter
->tx_ring
[i
]);
3268 "Allocation for Tx Queue %u failed\n", i
);
3269 for (i
--; i
>= 0; i
--)
3270 igb_free_tx_resources(adapter
->tx_ring
[i
]);
3279 * igb_setup_tctl - configure the transmit control registers
3280 * @adapter: Board private structure
3282 void igb_setup_tctl(struct igb_adapter
*adapter
)
3284 struct e1000_hw
*hw
= &adapter
->hw
;
3287 /* disable queue 0 which is enabled by default on 82575 and 82576 */
3288 wr32(E1000_TXDCTL(0), 0);
3290 /* Program the Transmit Control Register */
3291 tctl
= rd32(E1000_TCTL
);
3292 tctl
&= ~E1000_TCTL_CT
;
3293 tctl
|= E1000_TCTL_PSP
| E1000_TCTL_RTLC
|
3294 (E1000_COLLISION_THRESHOLD
<< E1000_CT_SHIFT
);
3296 igb_config_collision_dist(hw
);
3298 /* Enable transmits */
3299 tctl
|= E1000_TCTL_EN
;
3301 wr32(E1000_TCTL
, tctl
);
3305 * igb_configure_tx_ring - Configure transmit ring after Reset
3306 * @adapter: board private structure
3307 * @ring: tx ring to configure
3309 * Configure a transmit ring after a reset.
3311 void igb_configure_tx_ring(struct igb_adapter
*adapter
,
3312 struct igb_ring
*ring
)
3314 struct e1000_hw
*hw
= &adapter
->hw
;
3316 u64 tdba
= ring
->dma
;
3317 int reg_idx
= ring
->reg_idx
;
3319 /* disable the queue */
3320 wr32(E1000_TXDCTL(reg_idx
), 0);
3324 wr32(E1000_TDLEN(reg_idx
),
3325 ring
->count
* sizeof(union e1000_adv_tx_desc
));
3326 wr32(E1000_TDBAL(reg_idx
),
3327 tdba
& 0x00000000ffffffffULL
);
3328 wr32(E1000_TDBAH(reg_idx
), tdba
>> 32);
3330 ring
->tail
= hw
->hw_addr
+ E1000_TDT(reg_idx
);
3331 wr32(E1000_TDH(reg_idx
), 0);
3332 writel(0, ring
->tail
);
3334 txdctl
|= IGB_TX_PTHRESH
;
3335 txdctl
|= IGB_TX_HTHRESH
<< 8;
3336 txdctl
|= IGB_TX_WTHRESH
<< 16;
3338 txdctl
|= E1000_TXDCTL_QUEUE_ENABLE
;
3339 wr32(E1000_TXDCTL(reg_idx
), txdctl
);
3343 * igb_configure_tx - Configure transmit Unit after Reset
3344 * @adapter: board private structure
3346 * Configure the Tx unit of the MAC after a reset.
3348 static void igb_configure_tx(struct igb_adapter
*adapter
)
3352 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
3353 igb_configure_tx_ring(adapter
, adapter
->tx_ring
[i
]);
3357 * igb_setup_rx_resources - allocate Rx resources (Descriptors)
3358 * @rx_ring: Rx descriptor ring (for a specific queue) to setup
3360 * Returns 0 on success, negative on failure
3362 int igb_setup_rx_resources(struct igb_ring
*rx_ring
)
3364 struct device
*dev
= rx_ring
->dev
;
3367 size
= sizeof(struct igb_rx_buffer
) * rx_ring
->count
;
3369 rx_ring
->rx_buffer_info
= vzalloc(size
);
3370 if (!rx_ring
->rx_buffer_info
)
3373 /* Round up to nearest 4K */
3374 rx_ring
->size
= rx_ring
->count
* sizeof(union e1000_adv_rx_desc
);
3375 rx_ring
->size
= ALIGN(rx_ring
->size
, 4096);
3377 rx_ring
->desc
= dma_alloc_coherent(dev
, rx_ring
->size
,
3378 &rx_ring
->dma
, GFP_KERNEL
);
3382 rx_ring
->next_to_alloc
= 0;
3383 rx_ring
->next_to_clean
= 0;
3384 rx_ring
->next_to_use
= 0;
3389 vfree(rx_ring
->rx_buffer_info
);
3390 rx_ring
->rx_buffer_info
= NULL
;
3391 dev_err(dev
, "Unable to allocate memory for the Rx descriptor ring\n");
3396 * igb_setup_all_rx_resources - wrapper to allocate Rx resources
3397 * (Descriptors) for all queues
3398 * @adapter: board private structure
3400 * Return 0 on success, negative on failure
3402 static int igb_setup_all_rx_resources(struct igb_adapter
*adapter
)
3404 struct pci_dev
*pdev
= adapter
->pdev
;
3407 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
3408 err
= igb_setup_rx_resources(adapter
->rx_ring
[i
]);
3411 "Allocation for Rx Queue %u failed\n", i
);
3412 for (i
--; i
>= 0; i
--)
3413 igb_free_rx_resources(adapter
->rx_ring
[i
]);
3422 * igb_setup_mrqc - configure the multiple receive queue control registers
3423 * @adapter: Board private structure
3425 static void igb_setup_mrqc(struct igb_adapter
*adapter
)
3427 struct e1000_hw
*hw
= &adapter
->hw
;
3429 u32 j
, num_rx_queues
;
3432 netdev_rss_key_fill(rss_key
, sizeof(rss_key
));
3433 for (j
= 0; j
< 10; j
++)
3434 wr32(E1000_RSSRK(j
), rss_key
[j
]);
3436 num_rx_queues
= adapter
->rss_queues
;
3438 switch (hw
->mac
.type
) {
3440 /* 82576 supports 2 RSS queues for SR-IOV */
3441 if (adapter
->vfs_allocated_count
)
3448 if (adapter
->rss_indir_tbl_init
!= num_rx_queues
) {
3449 for (j
= 0; j
< IGB_RETA_SIZE
; j
++)
3450 adapter
->rss_indir_tbl
[j
] =
3451 (j
* num_rx_queues
) / IGB_RETA_SIZE
;
3452 adapter
->rss_indir_tbl_init
= num_rx_queues
;
3454 igb_write_rss_indir_tbl(adapter
);
3456 /* Disable raw packet checksumming so that RSS hash is placed in
3457 * descriptor on writeback. No need to enable TCP/UDP/IP checksum
3458 * offloads as they are enabled by default
3460 rxcsum
= rd32(E1000_RXCSUM
);
3461 rxcsum
|= E1000_RXCSUM_PCSD
;
3463 if (adapter
->hw
.mac
.type
>= e1000_82576
)
3464 /* Enable Receive Checksum Offload for SCTP */
3465 rxcsum
|= E1000_RXCSUM_CRCOFL
;
3467 /* Don't need to set TUOFL or IPOFL, they default to 1 */
3468 wr32(E1000_RXCSUM
, rxcsum
);
3470 /* Generate RSS hash based on packet types, TCP/UDP
3471 * port numbers and/or IPv4/v6 src and dst addresses
3473 mrqc
= E1000_MRQC_RSS_FIELD_IPV4
|
3474 E1000_MRQC_RSS_FIELD_IPV4_TCP
|
3475 E1000_MRQC_RSS_FIELD_IPV6
|
3476 E1000_MRQC_RSS_FIELD_IPV6_TCP
|
3477 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX
;
3479 if (adapter
->flags
& IGB_FLAG_RSS_FIELD_IPV4_UDP
)
3480 mrqc
|= E1000_MRQC_RSS_FIELD_IPV4_UDP
;
3481 if (adapter
->flags
& IGB_FLAG_RSS_FIELD_IPV6_UDP
)
3482 mrqc
|= E1000_MRQC_RSS_FIELD_IPV6_UDP
;
3484 /* If VMDq is enabled then we set the appropriate mode for that, else
3485 * we default to RSS so that an RSS hash is calculated per packet even
3486 * if we are only using one queue
3488 if (adapter
->vfs_allocated_count
) {
3489 if (hw
->mac
.type
> e1000_82575
) {
3490 /* Set the default pool for the PF's first queue */
3491 u32 vtctl
= rd32(E1000_VT_CTL
);
3493 vtctl
&= ~(E1000_VT_CTL_DEFAULT_POOL_MASK
|
3494 E1000_VT_CTL_DISABLE_DEF_POOL
);
3495 vtctl
|= adapter
->vfs_allocated_count
<<
3496 E1000_VT_CTL_DEFAULT_POOL_SHIFT
;
3497 wr32(E1000_VT_CTL
, vtctl
);
3499 if (adapter
->rss_queues
> 1)
3500 mrqc
|= E1000_MRQC_ENABLE_VMDQ_RSS_2Q
;
3502 mrqc
|= E1000_MRQC_ENABLE_VMDQ
;
3504 if (hw
->mac
.type
!= e1000_i211
)
3505 mrqc
|= E1000_MRQC_ENABLE_RSS_4Q
;
3507 igb_vmm_control(adapter
);
3509 wr32(E1000_MRQC
, mrqc
);
3513 * igb_setup_rctl - configure the receive control registers
3514 * @adapter: Board private structure
3516 void igb_setup_rctl(struct igb_adapter
*adapter
)
3518 struct e1000_hw
*hw
= &adapter
->hw
;
3521 rctl
= rd32(E1000_RCTL
);
3523 rctl
&= ~(3 << E1000_RCTL_MO_SHIFT
);
3524 rctl
&= ~(E1000_RCTL_LBM_TCVR
| E1000_RCTL_LBM_MAC
);
3526 rctl
|= E1000_RCTL_EN
| E1000_RCTL_BAM
| E1000_RCTL_RDMTS_HALF
|
3527 (hw
->mac
.mc_filter_type
<< E1000_RCTL_MO_SHIFT
);
3529 /* enable stripping of CRC. It's unlikely this will break BMC
3530 * redirection as it did with e1000. Newer features require
3531 * that the HW strips the CRC.
3533 rctl
|= E1000_RCTL_SECRC
;
3535 /* disable store bad packets and clear size bits. */
3536 rctl
&= ~(E1000_RCTL_SBP
| E1000_RCTL_SZ_256
);
3538 /* enable LPE to allow for reception of jumbo frames */
3539 rctl
|= E1000_RCTL_LPE
;
3541 /* disable queue 0 to prevent tail write w/o re-config */
3542 wr32(E1000_RXDCTL(0), 0);
3544 /* Attention!!! For SR-IOV PF driver operations you must enable
3545 * queue drop for all VF and PF queues to prevent head of line blocking
3546 * if an un-trusted VF does not provide descriptors to hardware.
3548 if (adapter
->vfs_allocated_count
) {
3549 /* set all queue drop enable bits */
3550 wr32(E1000_QDE
, ALL_QUEUES
);
3553 /* This is useful for sniffing bad packets. */
3554 if (adapter
->netdev
->features
& NETIF_F_RXALL
) {
3555 /* UPE and MPE will be handled by normal PROMISC logic
3556 * in e1000e_set_rx_mode
3558 rctl
|= (E1000_RCTL_SBP
| /* Receive bad packets */
3559 E1000_RCTL_BAM
| /* RX All Bcast Pkts */
3560 E1000_RCTL_PMCF
); /* RX All MAC Ctrl Pkts */
3562 rctl
&= ~(E1000_RCTL_DPF
| /* Allow filtered pause */
3563 E1000_RCTL_CFIEN
); /* Dis VLAN CFIEN Filter */
3564 /* Do not mess with E1000_CTRL_VME, it affects transmit as well,
3565 * and that breaks VLANs.
3569 wr32(E1000_RCTL
, rctl
);
3572 static inline int igb_set_vf_rlpml(struct igb_adapter
*adapter
, int size
,
3575 struct e1000_hw
*hw
= &adapter
->hw
;
3578 if (size
> MAX_JUMBO_FRAME_SIZE
)
3579 size
= MAX_JUMBO_FRAME_SIZE
;
3581 vmolr
= rd32(E1000_VMOLR(vfn
));
3582 vmolr
&= ~E1000_VMOLR_RLPML_MASK
;
3583 vmolr
|= size
| E1000_VMOLR_LPE
;
3584 wr32(E1000_VMOLR(vfn
), vmolr
);
3589 static inline void igb_set_vmolr(struct igb_adapter
*adapter
,
3592 struct e1000_hw
*hw
= &adapter
->hw
;
3595 /* This register exists only on 82576 and newer so if we are older then
3596 * we should exit and do nothing
3598 if (hw
->mac
.type
< e1000_82576
)
3601 vmolr
= rd32(E1000_VMOLR(vfn
));
3602 vmolr
|= E1000_VMOLR_STRVLAN
; /* Strip vlan tags */
3603 if (hw
->mac
.type
== e1000_i350
) {
3606 dvmolr
= rd32(E1000_DVMOLR(vfn
));
3607 dvmolr
|= E1000_DVMOLR_STRVLAN
;
3608 wr32(E1000_DVMOLR(vfn
), dvmolr
);
3611 vmolr
|= E1000_VMOLR_AUPE
; /* Accept untagged packets */
3613 vmolr
&= ~(E1000_VMOLR_AUPE
); /* Tagged packets ONLY */
3615 /* clear all bits that might not be set */
3616 vmolr
&= ~(E1000_VMOLR_BAM
| E1000_VMOLR_RSSE
);
3618 if (adapter
->rss_queues
> 1 && vfn
== adapter
->vfs_allocated_count
)
3619 vmolr
|= E1000_VMOLR_RSSE
; /* enable RSS */
3620 /* for VMDq only allow the VFs and pool 0 to accept broadcast and
3623 if (vfn
<= adapter
->vfs_allocated_count
)
3624 vmolr
|= E1000_VMOLR_BAM
; /* Accept broadcast */
3626 wr32(E1000_VMOLR(vfn
), vmolr
);
3630 * igb_configure_rx_ring - Configure a receive ring after Reset
3631 * @adapter: board private structure
3632 * @ring: receive ring to be configured
3634 * Configure the Rx unit of the MAC after a reset.
3636 void igb_configure_rx_ring(struct igb_adapter
*adapter
,
3637 struct igb_ring
*ring
)
3639 struct e1000_hw
*hw
= &adapter
->hw
;
3640 u64 rdba
= ring
->dma
;
3641 int reg_idx
= ring
->reg_idx
;
3642 u32 srrctl
= 0, rxdctl
= 0;
3644 /* disable the queue */
3645 wr32(E1000_RXDCTL(reg_idx
), 0);
3647 /* Set DMA base address registers */
3648 wr32(E1000_RDBAL(reg_idx
),
3649 rdba
& 0x00000000ffffffffULL
);
3650 wr32(E1000_RDBAH(reg_idx
), rdba
>> 32);
3651 wr32(E1000_RDLEN(reg_idx
),
3652 ring
->count
* sizeof(union e1000_adv_rx_desc
));
3654 /* initialize head and tail */
3655 ring
->tail
= hw
->hw_addr
+ E1000_RDT(reg_idx
);
3656 wr32(E1000_RDH(reg_idx
), 0);
3657 writel(0, ring
->tail
);
3659 /* set descriptor configuration */
3660 srrctl
= IGB_RX_HDR_LEN
<< E1000_SRRCTL_BSIZEHDRSIZE_SHIFT
;
3661 srrctl
|= IGB_RX_BUFSZ
>> E1000_SRRCTL_BSIZEPKT_SHIFT
;
3662 srrctl
|= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF
;
3663 if (hw
->mac
.type
>= e1000_82580
)
3664 srrctl
|= E1000_SRRCTL_TIMESTAMP
;
3665 /* Only set Drop Enable if we are supporting multiple queues */
3666 if (adapter
->vfs_allocated_count
|| adapter
->num_rx_queues
> 1)
3667 srrctl
|= E1000_SRRCTL_DROP_EN
;
3669 wr32(E1000_SRRCTL(reg_idx
), srrctl
);
3671 /* set filtering for VMDQ pools */
3672 igb_set_vmolr(adapter
, reg_idx
& 0x7, true);
3674 rxdctl
|= IGB_RX_PTHRESH
;
3675 rxdctl
|= IGB_RX_HTHRESH
<< 8;
3676 rxdctl
|= IGB_RX_WTHRESH
<< 16;
3678 /* enable receive descriptor fetching */
3679 rxdctl
|= E1000_RXDCTL_QUEUE_ENABLE
;
3680 wr32(E1000_RXDCTL(reg_idx
), rxdctl
);
3684 * igb_configure_rx - Configure receive Unit after Reset
3685 * @adapter: board private structure
3687 * Configure the Rx unit of the MAC after a reset.
3689 static void igb_configure_rx(struct igb_adapter
*adapter
)
3693 /* set the correct pool for the PF default MAC address in entry 0 */
3694 igb_rar_set_qsel(adapter
, adapter
->hw
.mac
.addr
, 0,
3695 adapter
->vfs_allocated_count
);
3697 /* Setup the HW Rx Head and Tail Descriptor Pointers and
3698 * the Base and Length of the Rx Descriptor Ring
3700 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
3701 igb_configure_rx_ring(adapter
, adapter
->rx_ring
[i
]);
3705 * igb_free_tx_resources - Free Tx Resources per Queue
3706 * @tx_ring: Tx descriptor ring for a specific queue
3708 * Free all transmit software resources
3710 void igb_free_tx_resources(struct igb_ring
*tx_ring
)
3712 igb_clean_tx_ring(tx_ring
);
3714 vfree(tx_ring
->tx_buffer_info
);
3715 tx_ring
->tx_buffer_info
= NULL
;
3717 /* if not set, then don't free */
3721 dma_free_coherent(tx_ring
->dev
, tx_ring
->size
,
3722 tx_ring
->desc
, tx_ring
->dma
);
3724 tx_ring
->desc
= NULL
;
3728 * igb_free_all_tx_resources - Free Tx Resources for All Queues
3729 * @adapter: board private structure
3731 * Free all transmit software resources
3733 static void igb_free_all_tx_resources(struct igb_adapter
*adapter
)
3737 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
3738 if (adapter
->tx_ring
[i
])
3739 igb_free_tx_resources(adapter
->tx_ring
[i
]);
3742 void igb_unmap_and_free_tx_resource(struct igb_ring
*ring
,
3743 struct igb_tx_buffer
*tx_buffer
)
3745 if (tx_buffer
->skb
) {
3746 dev_kfree_skb_any(tx_buffer
->skb
);
3747 if (dma_unmap_len(tx_buffer
, len
))
3748 dma_unmap_single(ring
->dev
,
3749 dma_unmap_addr(tx_buffer
, dma
),
3750 dma_unmap_len(tx_buffer
, len
),
3752 } else if (dma_unmap_len(tx_buffer
, len
)) {
3753 dma_unmap_page(ring
->dev
,
3754 dma_unmap_addr(tx_buffer
, dma
),
3755 dma_unmap_len(tx_buffer
, len
),
3758 tx_buffer
->next_to_watch
= NULL
;
3759 tx_buffer
->skb
= NULL
;
3760 dma_unmap_len_set(tx_buffer
, len
, 0);
3761 /* buffer_info must be completely set up in the transmit path */
3765 * igb_clean_tx_ring - Free Tx Buffers
3766 * @tx_ring: ring to be cleaned
3768 static void igb_clean_tx_ring(struct igb_ring
*tx_ring
)
3770 struct igb_tx_buffer
*buffer_info
;
3774 if (!tx_ring
->tx_buffer_info
)
3776 /* Free all the Tx ring sk_buffs */
3778 for (i
= 0; i
< tx_ring
->count
; i
++) {
3779 buffer_info
= &tx_ring
->tx_buffer_info
[i
];
3780 igb_unmap_and_free_tx_resource(tx_ring
, buffer_info
);
3783 netdev_tx_reset_queue(txring_txq(tx_ring
));
3785 size
= sizeof(struct igb_tx_buffer
) * tx_ring
->count
;
3786 memset(tx_ring
->tx_buffer_info
, 0, size
);
3788 /* Zero out the descriptor ring */
3789 memset(tx_ring
->desc
, 0, tx_ring
->size
);
3791 tx_ring
->next_to_use
= 0;
3792 tx_ring
->next_to_clean
= 0;
3796 * igb_clean_all_tx_rings - Free Tx Buffers for all queues
3797 * @adapter: board private structure
3799 static void igb_clean_all_tx_rings(struct igb_adapter
*adapter
)
3803 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
3804 if (adapter
->tx_ring
[i
])
3805 igb_clean_tx_ring(adapter
->tx_ring
[i
]);
3809 * igb_free_rx_resources - Free Rx Resources
3810 * @rx_ring: ring to clean the resources from
3812 * Free all receive software resources
3814 void igb_free_rx_resources(struct igb_ring
*rx_ring
)
3816 igb_clean_rx_ring(rx_ring
);
3818 vfree(rx_ring
->rx_buffer_info
);
3819 rx_ring
->rx_buffer_info
= NULL
;
3821 /* if not set, then don't free */
3825 dma_free_coherent(rx_ring
->dev
, rx_ring
->size
,
3826 rx_ring
->desc
, rx_ring
->dma
);
3828 rx_ring
->desc
= NULL
;
3832 * igb_free_all_rx_resources - Free Rx Resources for All Queues
3833 * @adapter: board private structure
3835 * Free all receive software resources
3837 static void igb_free_all_rx_resources(struct igb_adapter
*adapter
)
3841 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
3842 if (adapter
->rx_ring
[i
])
3843 igb_free_rx_resources(adapter
->rx_ring
[i
]);
3847 * igb_clean_rx_ring - Free Rx Buffers per Queue
3848 * @rx_ring: ring to free buffers from
3850 static void igb_clean_rx_ring(struct igb_ring
*rx_ring
)
3856 dev_kfree_skb(rx_ring
->skb
);
3857 rx_ring
->skb
= NULL
;
3859 if (!rx_ring
->rx_buffer_info
)
3862 /* Free all the Rx ring sk_buffs */
3863 for (i
= 0; i
< rx_ring
->count
; i
++) {
3864 struct igb_rx_buffer
*buffer_info
= &rx_ring
->rx_buffer_info
[i
];
3866 if (!buffer_info
->page
)
3869 dma_unmap_page(rx_ring
->dev
,
3873 __free_page(buffer_info
->page
);
3875 buffer_info
->page
= NULL
;
3878 size
= sizeof(struct igb_rx_buffer
) * rx_ring
->count
;
3879 memset(rx_ring
->rx_buffer_info
, 0, size
);
3881 /* Zero out the descriptor ring */
3882 memset(rx_ring
->desc
, 0, rx_ring
->size
);
3884 rx_ring
->next_to_alloc
= 0;
3885 rx_ring
->next_to_clean
= 0;
3886 rx_ring
->next_to_use
= 0;
3890 * igb_clean_all_rx_rings - Free Rx Buffers for all queues
3891 * @adapter: board private structure
3893 static void igb_clean_all_rx_rings(struct igb_adapter
*adapter
)
3897 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
3898 if (adapter
->rx_ring
[i
])
3899 igb_clean_rx_ring(adapter
->rx_ring
[i
]);
3903 * igb_set_mac - Change the Ethernet Address of the NIC
3904 * @netdev: network interface device structure
3905 * @p: pointer to an address structure
3907 * Returns 0 on success, negative on failure
3909 static int igb_set_mac(struct net_device
*netdev
, void *p
)
3911 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3912 struct e1000_hw
*hw
= &adapter
->hw
;
3913 struct sockaddr
*addr
= p
;
3915 if (!is_valid_ether_addr(addr
->sa_data
))
3916 return -EADDRNOTAVAIL
;
3918 memcpy(netdev
->dev_addr
, addr
->sa_data
, netdev
->addr_len
);
3919 memcpy(hw
->mac
.addr
, addr
->sa_data
, netdev
->addr_len
);
3921 /* set the correct pool for the new PF MAC address in entry 0 */
3922 igb_rar_set_qsel(adapter
, hw
->mac
.addr
, 0,
3923 adapter
->vfs_allocated_count
);
3929 * igb_write_mc_addr_list - write multicast addresses to MTA
3930 * @netdev: network interface device structure
3932 * Writes multicast address list to the MTA hash table.
3933 * Returns: -ENOMEM on failure
3934 * 0 on no addresses written
3935 * X on writing X addresses to MTA
3937 static int igb_write_mc_addr_list(struct net_device
*netdev
)
3939 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3940 struct e1000_hw
*hw
= &adapter
->hw
;
3941 struct netdev_hw_addr
*ha
;
3945 if (netdev_mc_empty(netdev
)) {
3946 /* nothing to program, so clear mc list */
3947 igb_update_mc_addr_list(hw
, NULL
, 0);
3948 igb_restore_vf_multicasts(adapter
);
3952 mta_list
= kzalloc(netdev_mc_count(netdev
) * 6, GFP_ATOMIC
);
3956 /* The shared function expects a packed array of only addresses. */
3958 netdev_for_each_mc_addr(ha
, netdev
)
3959 memcpy(mta_list
+ (i
++ * ETH_ALEN
), ha
->addr
, ETH_ALEN
);
3961 igb_update_mc_addr_list(hw
, mta_list
, i
);
3964 return netdev_mc_count(netdev
);
3968 * igb_write_uc_addr_list - write unicast addresses to RAR table
3969 * @netdev: network interface device structure
3971 * Writes unicast address list to the RAR table.
3972 * Returns: -ENOMEM on failure/insufficient address space
3973 * 0 on no addresses written
3974 * X on writing X addresses to the RAR table
3976 static int igb_write_uc_addr_list(struct net_device
*netdev
)
3978 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3979 struct e1000_hw
*hw
= &adapter
->hw
;
3980 unsigned int vfn
= adapter
->vfs_allocated_count
;
3981 unsigned int rar_entries
= hw
->mac
.rar_entry_count
- (vfn
+ 1);
3984 /* return ENOMEM indicating insufficient memory for addresses */
3985 if (netdev_uc_count(netdev
) > rar_entries
)
3988 if (!netdev_uc_empty(netdev
) && rar_entries
) {
3989 struct netdev_hw_addr
*ha
;
3991 netdev_for_each_uc_addr(ha
, netdev
) {
3994 igb_rar_set_qsel(adapter
, ha
->addr
,
4000 /* write the addresses in reverse order to avoid write combining */
4001 for (; rar_entries
> 0 ; rar_entries
--) {
4002 wr32(E1000_RAH(rar_entries
), 0);
4003 wr32(E1000_RAL(rar_entries
), 0);
4010 static int igb_vlan_promisc_enable(struct igb_adapter
*adapter
)
4012 struct e1000_hw
*hw
= &adapter
->hw
;
4015 switch (hw
->mac
.type
) {
4019 /* VLAN filtering needed for VLAN prio filter */
4020 if (adapter
->netdev
->features
& NETIF_F_NTUPLE
)
4026 /* VLAN filtering needed for pool filtering */
4027 if (adapter
->vfs_allocated_count
)
4034 /* We are already in VLAN promisc, nothing to do */
4035 if (adapter
->flags
& IGB_FLAG_VLAN_PROMISC
)
4038 if (!adapter
->vfs_allocated_count
)
4041 /* Add PF to all active pools */
4042 pf_id
= adapter
->vfs_allocated_count
+ E1000_VLVF_POOLSEL_SHIFT
;
4044 for (i
= E1000_VLVF_ARRAY_SIZE
; --i
;) {
4045 u32 vlvf
= rd32(E1000_VLVF(i
));
4048 wr32(E1000_VLVF(i
), vlvf
);
4052 /* Set all bits in the VLAN filter table array */
4053 for (i
= E1000_VLAN_FILTER_TBL_SIZE
; i
--;)
4054 hw
->mac
.ops
.write_vfta(hw
, i
, ~0U);
4056 /* Set flag so we don't redo unnecessary work */
4057 adapter
->flags
|= IGB_FLAG_VLAN_PROMISC
;
4062 #define VFTA_BLOCK_SIZE 8
4063 static void igb_scrub_vfta(struct igb_adapter
*adapter
, u32 vfta_offset
)
4065 struct e1000_hw
*hw
= &adapter
->hw
;
4066 u32 vfta
[VFTA_BLOCK_SIZE
] = { 0 };
4067 u32 vid_start
= vfta_offset
* 32;
4068 u32 vid_end
= vid_start
+ (VFTA_BLOCK_SIZE
* 32);
4069 u32 i
, vid
, word
, bits
, pf_id
;
4071 /* guarantee that we don't scrub out management VLAN */
4072 vid
= adapter
->mng_vlan_id
;
4073 if (vid
>= vid_start
&& vid
< vid_end
)
4074 vfta
[(vid
- vid_start
) / 32] |= 1 << (vid
% 32);
4076 if (!adapter
->vfs_allocated_count
)
4079 pf_id
= adapter
->vfs_allocated_count
+ E1000_VLVF_POOLSEL_SHIFT
;
4081 for (i
= E1000_VLVF_ARRAY_SIZE
; --i
;) {
4082 u32 vlvf
= rd32(E1000_VLVF(i
));
4084 /* pull VLAN ID from VLVF */
4085 vid
= vlvf
& VLAN_VID_MASK
;
4087 /* only concern ourselves with a certain range */
4088 if (vid
< vid_start
|| vid
>= vid_end
)
4091 if (vlvf
& E1000_VLVF_VLANID_ENABLE
) {
4092 /* record VLAN ID in VFTA */
4093 vfta
[(vid
- vid_start
) / 32] |= 1 << (vid
% 32);
4095 /* if PF is part of this then continue */
4096 if (test_bit(vid
, adapter
->active_vlans
))
4100 /* remove PF from the pool */
4101 bits
= ~(1 << pf_id
);
4102 bits
&= rd32(E1000_VLVF(i
));
4103 wr32(E1000_VLVF(i
), bits
);
4107 /* extract values from active_vlans and write back to VFTA */
4108 for (i
= VFTA_BLOCK_SIZE
; i
--;) {
4109 vid
= (vfta_offset
+ i
) * 32;
4110 word
= vid
/ BITS_PER_LONG
;
4111 bits
= vid
% BITS_PER_LONG
;
4113 vfta
[i
] |= adapter
->active_vlans
[word
] >> bits
;
4115 hw
->mac
.ops
.write_vfta(hw
, vfta_offset
+ i
, vfta
[i
]);
4119 static void igb_vlan_promisc_disable(struct igb_adapter
*adapter
)
4123 /* We are not in VLAN promisc, nothing to do */
4124 if (!(adapter
->flags
& IGB_FLAG_VLAN_PROMISC
))
4127 /* Set flag so we don't redo unnecessary work */
4128 adapter
->flags
&= ~IGB_FLAG_VLAN_PROMISC
;
4130 for (i
= 0; i
< E1000_VLAN_FILTER_TBL_SIZE
; i
+= VFTA_BLOCK_SIZE
)
4131 igb_scrub_vfta(adapter
, i
);
4135 * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
4136 * @netdev: network interface device structure
4138 * The set_rx_mode entry point is called whenever the unicast or multicast
4139 * address lists or the network interface flags are updated. This routine is
4140 * responsible for configuring the hardware for proper unicast, multicast,
4141 * promiscuous mode, and all-multi behavior.
4143 static void igb_set_rx_mode(struct net_device
*netdev
)
4145 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4146 struct e1000_hw
*hw
= &adapter
->hw
;
4147 unsigned int vfn
= adapter
->vfs_allocated_count
;
4148 u32 rctl
= 0, vmolr
= 0;
4151 /* Check for Promiscuous and All Multicast modes */
4152 if (netdev
->flags
& IFF_PROMISC
) {
4153 rctl
|= E1000_RCTL_UPE
| E1000_RCTL_MPE
;
4154 vmolr
|= E1000_VMOLR_MPME
;
4156 /* enable use of UTA filter to force packets to default pool */
4157 if (hw
->mac
.type
== e1000_82576
)
4158 vmolr
|= E1000_VMOLR_ROPE
;
4160 if (netdev
->flags
& IFF_ALLMULTI
) {
4161 rctl
|= E1000_RCTL_MPE
;
4162 vmolr
|= E1000_VMOLR_MPME
;
4164 /* Write addresses to the MTA, if the attempt fails
4165 * then we should just turn on promiscuous mode so
4166 * that we can at least receive multicast traffic
4168 count
= igb_write_mc_addr_list(netdev
);
4170 rctl
|= E1000_RCTL_MPE
;
4171 vmolr
|= E1000_VMOLR_MPME
;
4173 vmolr
|= E1000_VMOLR_ROMPE
;
4178 /* Write addresses to available RAR registers, if there is not
4179 * sufficient space to store all the addresses then enable
4180 * unicast promiscuous mode
4182 count
= igb_write_uc_addr_list(netdev
);
4184 rctl
|= E1000_RCTL_UPE
;
4185 vmolr
|= E1000_VMOLR_ROPE
;
4188 /* enable VLAN filtering by default */
4189 rctl
|= E1000_RCTL_VFE
;
4191 /* disable VLAN filtering for modes that require it */
4192 if ((netdev
->flags
& IFF_PROMISC
) ||
4193 (netdev
->features
& NETIF_F_RXALL
)) {
4194 /* if we fail to set all rules then just clear VFE */
4195 if (igb_vlan_promisc_enable(adapter
))
4196 rctl
&= ~E1000_RCTL_VFE
;
4198 igb_vlan_promisc_disable(adapter
);
4201 /* update state of unicast, multicast, and VLAN filtering modes */
4202 rctl
|= rd32(E1000_RCTL
) & ~(E1000_RCTL_UPE
| E1000_RCTL_MPE
|
4204 wr32(E1000_RCTL
, rctl
);
4206 /* In order to support SR-IOV and eventually VMDq it is necessary to set
4207 * the VMOLR to enable the appropriate modes. Without this workaround
4208 * we will have issues with VLAN tag stripping not being done for frames
4209 * that are only arriving because we are the default pool
4211 if ((hw
->mac
.type
< e1000_82576
) || (hw
->mac
.type
> e1000_i350
))
4214 /* set UTA to appropriate mode */
4215 igb_set_uta(adapter
, !!(vmolr
& E1000_VMOLR_ROPE
));
4217 vmolr
|= rd32(E1000_VMOLR(vfn
)) &
4218 ~(E1000_VMOLR_ROPE
| E1000_VMOLR_MPME
| E1000_VMOLR_ROMPE
);
4220 /* enable Rx jumbo frames, no need for restriction */
4221 vmolr
&= ~E1000_VMOLR_RLPML_MASK
;
4222 vmolr
|= MAX_JUMBO_FRAME_SIZE
| E1000_VMOLR_LPE
;
4224 wr32(E1000_VMOLR(vfn
), vmolr
);
4225 wr32(E1000_RLPML
, MAX_JUMBO_FRAME_SIZE
);
4227 igb_restore_vf_multicasts(adapter
);
4230 static void igb_check_wvbr(struct igb_adapter
*adapter
)
4232 struct e1000_hw
*hw
= &adapter
->hw
;
4235 switch (hw
->mac
.type
) {
4238 wvbr
= rd32(E1000_WVBR
);
4246 adapter
->wvbr
|= wvbr
;
4249 #define IGB_STAGGERED_QUEUE_OFFSET 8
4251 static void igb_spoof_check(struct igb_adapter
*adapter
)
4258 for (j
= 0; j
< adapter
->vfs_allocated_count
; j
++) {
4259 if (adapter
->wvbr
& (1 << j
) ||
4260 adapter
->wvbr
& (1 << (j
+ IGB_STAGGERED_QUEUE_OFFSET
))) {
4261 dev_warn(&adapter
->pdev
->dev
,
4262 "Spoof event(s) detected on VF %d\n", j
);
4265 (1 << (j
+ IGB_STAGGERED_QUEUE_OFFSET
)));
4270 /* Need to wait a few seconds after link up to get diagnostic information from
4273 static void igb_update_phy_info(unsigned long data
)
4275 struct igb_adapter
*adapter
= (struct igb_adapter
*) data
;
4276 igb_get_phy_info(&adapter
->hw
);
4280 * igb_has_link - check shared code for link and determine up/down
4281 * @adapter: pointer to driver private info
4283 bool igb_has_link(struct igb_adapter
*adapter
)
4285 struct e1000_hw
*hw
= &adapter
->hw
;
4286 bool link_active
= false;
4288 /* get_link_status is set on LSC (link status) interrupt or
4289 * rx sequence error interrupt. get_link_status will stay
4290 * false until the e1000_check_for_link establishes link
4291 * for copper adapters ONLY
4293 switch (hw
->phy
.media_type
) {
4294 case e1000_media_type_copper
:
4295 if (!hw
->mac
.get_link_status
)
4297 case e1000_media_type_internal_serdes
:
4298 hw
->mac
.ops
.check_for_link(hw
);
4299 link_active
= !hw
->mac
.get_link_status
;
4302 case e1000_media_type_unknown
:
4306 if (((hw
->mac
.type
== e1000_i210
) ||
4307 (hw
->mac
.type
== e1000_i211
)) &&
4308 (hw
->phy
.id
== I210_I_PHY_ID
)) {
4309 if (!netif_carrier_ok(adapter
->netdev
)) {
4310 adapter
->flags
&= ~IGB_FLAG_NEED_LINK_UPDATE
;
4311 } else if (!(adapter
->flags
& IGB_FLAG_NEED_LINK_UPDATE
)) {
4312 adapter
->flags
|= IGB_FLAG_NEED_LINK_UPDATE
;
4313 adapter
->link_check_timeout
= jiffies
;
4320 static bool igb_thermal_sensor_event(struct e1000_hw
*hw
, u32 event
)
4323 u32 ctrl_ext
, thstat
;
4325 /* check for thermal sensor event on i350 copper only */
4326 if (hw
->mac
.type
== e1000_i350
) {
4327 thstat
= rd32(E1000_THSTAT
);
4328 ctrl_ext
= rd32(E1000_CTRL_EXT
);
4330 if ((hw
->phy
.media_type
== e1000_media_type_copper
) &&
4331 !(ctrl_ext
& E1000_CTRL_EXT_LINK_MODE_SGMII
))
4332 ret
= !!(thstat
& event
);
4339 * igb_check_lvmmc - check for malformed packets received
4340 * and indicated in LVMMC register
4341 * @adapter: pointer to adapter
4343 static void igb_check_lvmmc(struct igb_adapter
*adapter
)
4345 struct e1000_hw
*hw
= &adapter
->hw
;
4348 lvmmc
= rd32(E1000_LVMMC
);
4350 if (unlikely(net_ratelimit())) {
4351 netdev_warn(adapter
->netdev
,
4352 "malformed Tx packet detected and dropped, LVMMC:0x%08x\n",
4359 * igb_watchdog - Timer Call-back
4360 * @data: pointer to adapter cast into an unsigned long
4362 static void igb_watchdog(unsigned long data
)
4364 struct igb_adapter
*adapter
= (struct igb_adapter
*)data
;
4365 /* Do the rest outside of interrupt context */
4366 schedule_work(&adapter
->watchdog_task
);
4369 static void igb_watchdog_task(struct work_struct
*work
)
4371 struct igb_adapter
*adapter
= container_of(work
,
4374 struct e1000_hw
*hw
= &adapter
->hw
;
4375 struct e1000_phy_info
*phy
= &hw
->phy
;
4376 struct net_device
*netdev
= adapter
->netdev
;
4380 u16 phy_data
, retry_count
= 20;
4382 link
= igb_has_link(adapter
);
4384 if (adapter
->flags
& IGB_FLAG_NEED_LINK_UPDATE
) {
4385 if (time_after(jiffies
, (adapter
->link_check_timeout
+ HZ
)))
4386 adapter
->flags
&= ~IGB_FLAG_NEED_LINK_UPDATE
;
4391 /* Force link down if we have fiber to swap to */
4392 if (adapter
->flags
& IGB_FLAG_MAS_ENABLE
) {
4393 if (hw
->phy
.media_type
== e1000_media_type_copper
) {
4394 connsw
= rd32(E1000_CONNSW
);
4395 if (!(connsw
& E1000_CONNSW_AUTOSENSE_EN
))
4400 /* Perform a reset if the media type changed. */
4401 if (hw
->dev_spec
._82575
.media_changed
) {
4402 hw
->dev_spec
._82575
.media_changed
= false;
4403 adapter
->flags
|= IGB_FLAG_MEDIA_RESET
;
4406 /* Cancel scheduled suspend requests. */
4407 pm_runtime_resume(netdev
->dev
.parent
);
4409 if (!netif_carrier_ok(netdev
)) {
4412 hw
->mac
.ops
.get_speed_and_duplex(hw
,
4413 &adapter
->link_speed
,
4414 &adapter
->link_duplex
);
4416 ctrl
= rd32(E1000_CTRL
);
4417 /* Links status message must follow this format */
4419 "igb: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
4421 adapter
->link_speed
,
4422 adapter
->link_duplex
== FULL_DUPLEX
?
4424 (ctrl
& E1000_CTRL_TFCE
) &&
4425 (ctrl
& E1000_CTRL_RFCE
) ? "RX/TX" :
4426 (ctrl
& E1000_CTRL_RFCE
) ? "RX" :
4427 (ctrl
& E1000_CTRL_TFCE
) ? "TX" : "None");
4429 /* disable EEE if enabled */
4430 if ((adapter
->flags
& IGB_FLAG_EEE
) &&
4431 (adapter
->link_duplex
== HALF_DUPLEX
)) {
4432 dev_info(&adapter
->pdev
->dev
,
4433 "EEE Disabled: unsupported at half duplex. Re-enable using ethtool when at full duplex.\n");
4434 adapter
->hw
.dev_spec
._82575
.eee_disable
= true;
4435 adapter
->flags
&= ~IGB_FLAG_EEE
;
4438 /* check if SmartSpeed worked */
4439 igb_check_downshift(hw
);
4440 if (phy
->speed_downgraded
)
4441 netdev_warn(netdev
, "Link Speed was downgraded by SmartSpeed\n");
4443 /* check for thermal sensor event */
4444 if (igb_thermal_sensor_event(hw
,
4445 E1000_THSTAT_LINK_THROTTLE
))
4446 netdev_info(netdev
, "The network adapter link speed was downshifted because it overheated\n");
4448 /* adjust timeout factor according to speed/duplex */
4449 adapter
->tx_timeout_factor
= 1;
4450 switch (adapter
->link_speed
) {
4452 adapter
->tx_timeout_factor
= 14;
4455 /* maybe add some timeout factor ? */
4459 if (adapter
->link_speed
!= SPEED_1000
)
4462 /* wait for Remote receiver status OK */
4464 if (!igb_read_phy_reg(hw
, PHY_1000T_STATUS
,
4466 if (!(phy_data
& SR_1000T_REMOTE_RX_STATUS
) &&
4470 goto retry_read_status
;
4471 } else if (!retry_count
) {
4472 dev_err(&adapter
->pdev
->dev
, "exceed max 2 second\n");
4475 dev_err(&adapter
->pdev
->dev
, "read 1000Base-T Status Reg\n");
4478 netif_carrier_on(netdev
);
4480 igb_ping_all_vfs(adapter
);
4481 igb_check_vf_rate_limit(adapter
);
4483 /* link state has changed, schedule phy info update */
4484 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
4485 mod_timer(&adapter
->phy_info_timer
,
4486 round_jiffies(jiffies
+ 2 * HZ
));
4489 if (netif_carrier_ok(netdev
)) {
4490 adapter
->link_speed
= 0;
4491 adapter
->link_duplex
= 0;
4493 /* check for thermal sensor event */
4494 if (igb_thermal_sensor_event(hw
,
4495 E1000_THSTAT_PWR_DOWN
)) {
4496 netdev_err(netdev
, "The network adapter was stopped because it overheated\n");
4499 /* Links status message must follow this format */
4500 netdev_info(netdev
, "igb: %s NIC Link is Down\n",
4502 netif_carrier_off(netdev
);
4504 igb_ping_all_vfs(adapter
);
4506 /* link state has changed, schedule phy info update */
4507 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
4508 mod_timer(&adapter
->phy_info_timer
,
4509 round_jiffies(jiffies
+ 2 * HZ
));
4511 /* link is down, time to check for alternate media */
4512 if (adapter
->flags
& IGB_FLAG_MAS_ENABLE
) {
4513 igb_check_swap_media(adapter
);
4514 if (adapter
->flags
& IGB_FLAG_MEDIA_RESET
) {
4515 schedule_work(&adapter
->reset_task
);
4516 /* return immediately */
4520 pm_schedule_suspend(netdev
->dev
.parent
,
4523 /* also check for alternate media here */
4524 } else if (!netif_carrier_ok(netdev
) &&
4525 (adapter
->flags
& IGB_FLAG_MAS_ENABLE
)) {
4526 igb_check_swap_media(adapter
);
4527 if (adapter
->flags
& IGB_FLAG_MEDIA_RESET
) {
4528 schedule_work(&adapter
->reset_task
);
4529 /* return immediately */
4535 spin_lock(&adapter
->stats64_lock
);
4536 igb_update_stats(adapter
, &adapter
->stats64
);
4537 spin_unlock(&adapter
->stats64_lock
);
4539 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
4540 struct igb_ring
*tx_ring
= adapter
->tx_ring
[i
];
4541 if (!netif_carrier_ok(netdev
)) {
4542 /* We've lost link, so the controller stops DMA,
4543 * but we've got queued Tx work that's never going
4544 * to get done, so reset controller to flush Tx.
4545 * (Do the reset outside of interrupt context).
4547 if (igb_desc_unused(tx_ring
) + 1 < tx_ring
->count
) {
4548 adapter
->tx_timeout_count
++;
4549 schedule_work(&adapter
->reset_task
);
4550 /* return immediately since reset is imminent */
4555 /* Force detection of hung controller every watchdog period */
4556 set_bit(IGB_RING_FLAG_TX_DETECT_HANG
, &tx_ring
->flags
);
4559 /* Cause software interrupt to ensure Rx ring is cleaned */
4560 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
) {
4563 for (i
= 0; i
< adapter
->num_q_vectors
; i
++)
4564 eics
|= adapter
->q_vector
[i
]->eims_value
;
4565 wr32(E1000_EICS
, eics
);
4567 wr32(E1000_ICS
, E1000_ICS_RXDMT0
);
4570 igb_spoof_check(adapter
);
4571 igb_ptp_rx_hang(adapter
);
4573 /* Check LVMMC register on i350/i354 only */
4574 if ((adapter
->hw
.mac
.type
== e1000_i350
) ||
4575 (adapter
->hw
.mac
.type
== e1000_i354
))
4576 igb_check_lvmmc(adapter
);
4578 /* Reset the timer */
4579 if (!test_bit(__IGB_DOWN
, &adapter
->state
)) {
4580 if (adapter
->flags
& IGB_FLAG_NEED_LINK_UPDATE
)
4581 mod_timer(&adapter
->watchdog_timer
,
4582 round_jiffies(jiffies
+ HZ
));
4584 mod_timer(&adapter
->watchdog_timer
,
4585 round_jiffies(jiffies
+ 2 * HZ
));
4589 enum latency_range
{
4593 latency_invalid
= 255
4597 * igb_update_ring_itr - update the dynamic ITR value based on packet size
4598 * @q_vector: pointer to q_vector
4600 * Stores a new ITR value based on strictly on packet size. This
4601 * algorithm is less sophisticated than that used in igb_update_itr,
4602 * due to the difficulty of synchronizing statistics across multiple
4603 * receive rings. The divisors and thresholds used by this function
4604 * were determined based on theoretical maximum wire speed and testing
4605 * data, in order to minimize response time while increasing bulk
4607 * This functionality is controlled by ethtool's coalescing settings.
4608 * NOTE: This function is called only when operating in a multiqueue
4609 * receive environment.
4611 static void igb_update_ring_itr(struct igb_q_vector
*q_vector
)
4613 int new_val
= q_vector
->itr_val
;
4614 int avg_wire_size
= 0;
4615 struct igb_adapter
*adapter
= q_vector
->adapter
;
4616 unsigned int packets
;
4618 /* For non-gigabit speeds, just fix the interrupt rate at 4000
4619 * ints/sec - ITR timer value of 120 ticks.
4621 if (adapter
->link_speed
!= SPEED_1000
) {
4622 new_val
= IGB_4K_ITR
;
4626 packets
= q_vector
->rx
.total_packets
;
4628 avg_wire_size
= q_vector
->rx
.total_bytes
/ packets
;
4630 packets
= q_vector
->tx
.total_packets
;
4632 avg_wire_size
= max_t(u32
, avg_wire_size
,
4633 q_vector
->tx
.total_bytes
/ packets
);
4635 /* if avg_wire_size isn't set no work was done */
4639 /* Add 24 bytes to size to account for CRC, preamble, and gap */
4640 avg_wire_size
+= 24;
4642 /* Don't starve jumbo frames */
4643 avg_wire_size
= min(avg_wire_size
, 3000);
4645 /* Give a little boost to mid-size frames */
4646 if ((avg_wire_size
> 300) && (avg_wire_size
< 1200))
4647 new_val
= avg_wire_size
/ 3;
4649 new_val
= avg_wire_size
/ 2;
4651 /* conservative mode (itr 3) eliminates the lowest_latency setting */
4652 if (new_val
< IGB_20K_ITR
&&
4653 ((q_vector
->rx
.ring
&& adapter
->rx_itr_setting
== 3) ||
4654 (!q_vector
->rx
.ring
&& adapter
->tx_itr_setting
== 3)))
4655 new_val
= IGB_20K_ITR
;
4658 if (new_val
!= q_vector
->itr_val
) {
4659 q_vector
->itr_val
= new_val
;
4660 q_vector
->set_itr
= 1;
4663 q_vector
->rx
.total_bytes
= 0;
4664 q_vector
->rx
.total_packets
= 0;
4665 q_vector
->tx
.total_bytes
= 0;
4666 q_vector
->tx
.total_packets
= 0;
4670 * igb_update_itr - update the dynamic ITR value based on statistics
4671 * @q_vector: pointer to q_vector
4672 * @ring_container: ring info to update the itr for
4674 * Stores a new ITR value based on packets and byte
4675 * counts during the last interrupt. The advantage of per interrupt
4676 * computation is faster updates and more accurate ITR for the current
4677 * traffic pattern. Constants in this function were computed
4678 * based on theoretical maximum wire speed and thresholds were set based
4679 * on testing data as well as attempting to minimize response time
4680 * while increasing bulk throughput.
4681 * This functionality is controlled by ethtool's coalescing settings.
4682 * NOTE: These calculations are only valid when operating in a single-
4683 * queue environment.
4685 static void igb_update_itr(struct igb_q_vector
*q_vector
,
4686 struct igb_ring_container
*ring_container
)
4688 unsigned int packets
= ring_container
->total_packets
;
4689 unsigned int bytes
= ring_container
->total_bytes
;
4690 u8 itrval
= ring_container
->itr
;
4692 /* no packets, exit with status unchanged */
4697 case lowest_latency
:
4698 /* handle TSO and jumbo frames */
4699 if (bytes
/packets
> 8000)
4700 itrval
= bulk_latency
;
4701 else if ((packets
< 5) && (bytes
> 512))
4702 itrval
= low_latency
;
4704 case low_latency
: /* 50 usec aka 20000 ints/s */
4705 if (bytes
> 10000) {
4706 /* this if handles the TSO accounting */
4707 if (bytes
/packets
> 8000)
4708 itrval
= bulk_latency
;
4709 else if ((packets
< 10) || ((bytes
/packets
) > 1200))
4710 itrval
= bulk_latency
;
4711 else if ((packets
> 35))
4712 itrval
= lowest_latency
;
4713 } else if (bytes
/packets
> 2000) {
4714 itrval
= bulk_latency
;
4715 } else if (packets
<= 2 && bytes
< 512) {
4716 itrval
= lowest_latency
;
4719 case bulk_latency
: /* 250 usec aka 4000 ints/s */
4720 if (bytes
> 25000) {
4722 itrval
= low_latency
;
4723 } else if (bytes
< 1500) {
4724 itrval
= low_latency
;
4729 /* clear work counters since we have the values we need */
4730 ring_container
->total_bytes
= 0;
4731 ring_container
->total_packets
= 0;
4733 /* write updated itr to ring container */
4734 ring_container
->itr
= itrval
;
4737 static void igb_set_itr(struct igb_q_vector
*q_vector
)
4739 struct igb_adapter
*adapter
= q_vector
->adapter
;
4740 u32 new_itr
= q_vector
->itr_val
;
4743 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
4744 if (adapter
->link_speed
!= SPEED_1000
) {
4746 new_itr
= IGB_4K_ITR
;
4750 igb_update_itr(q_vector
, &q_vector
->tx
);
4751 igb_update_itr(q_vector
, &q_vector
->rx
);
4753 current_itr
= max(q_vector
->rx
.itr
, q_vector
->tx
.itr
);
4755 /* conservative mode (itr 3) eliminates the lowest_latency setting */
4756 if (current_itr
== lowest_latency
&&
4757 ((q_vector
->rx
.ring
&& adapter
->rx_itr_setting
== 3) ||
4758 (!q_vector
->rx
.ring
&& adapter
->tx_itr_setting
== 3)))
4759 current_itr
= low_latency
;
4761 switch (current_itr
) {
4762 /* counts and packets in update_itr are dependent on these numbers */
4763 case lowest_latency
:
4764 new_itr
= IGB_70K_ITR
; /* 70,000 ints/sec */
4767 new_itr
= IGB_20K_ITR
; /* 20,000 ints/sec */
4770 new_itr
= IGB_4K_ITR
; /* 4,000 ints/sec */
4777 if (new_itr
!= q_vector
->itr_val
) {
4778 /* this attempts to bias the interrupt rate towards Bulk
4779 * by adding intermediate steps when interrupt rate is
4782 new_itr
= new_itr
> q_vector
->itr_val
?
4783 max((new_itr
* q_vector
->itr_val
) /
4784 (new_itr
+ (q_vector
->itr_val
>> 2)),
4786 /* Don't write the value here; it resets the adapter's
4787 * internal timer, and causes us to delay far longer than
4788 * we should between interrupts. Instead, we write the ITR
4789 * value at the beginning of the next interrupt so the timing
4790 * ends up being correct.
4792 q_vector
->itr_val
= new_itr
;
4793 q_vector
->set_itr
= 1;
4797 static void igb_tx_ctxtdesc(struct igb_ring
*tx_ring
, u32 vlan_macip_lens
,
4798 u32 type_tucmd
, u32 mss_l4len_idx
)
4800 struct e1000_adv_tx_context_desc
*context_desc
;
4801 u16 i
= tx_ring
->next_to_use
;
4803 context_desc
= IGB_TX_CTXTDESC(tx_ring
, i
);
4806 tx_ring
->next_to_use
= (i
< tx_ring
->count
) ? i
: 0;
4808 /* set bits to identify this as an advanced context descriptor */
4809 type_tucmd
|= E1000_TXD_CMD_DEXT
| E1000_ADVTXD_DTYP_CTXT
;
4811 /* For 82575, context index must be unique per ring. */
4812 if (test_bit(IGB_RING_FLAG_TX_CTX_IDX
, &tx_ring
->flags
))
4813 mss_l4len_idx
|= tx_ring
->reg_idx
<< 4;
4815 context_desc
->vlan_macip_lens
= cpu_to_le32(vlan_macip_lens
);
4816 context_desc
->seqnum_seed
= 0;
4817 context_desc
->type_tucmd_mlhl
= cpu_to_le32(type_tucmd
);
4818 context_desc
->mss_l4len_idx
= cpu_to_le32(mss_l4len_idx
);
4821 static int igb_tso(struct igb_ring
*tx_ring
,
4822 struct igb_tx_buffer
*first
,
4825 struct sk_buff
*skb
= first
->skb
;
4826 u32 vlan_macip_lens
, type_tucmd
;
4827 u32 mss_l4len_idx
, l4len
;
4830 if (skb
->ip_summed
!= CHECKSUM_PARTIAL
)
4833 if (!skb_is_gso(skb
))
4836 err
= skb_cow_head(skb
, 0);
4840 /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
4841 type_tucmd
= E1000_ADVTXD_TUCMD_L4T_TCP
;
4843 if (first
->protocol
== htons(ETH_P_IP
)) {
4844 struct iphdr
*iph
= ip_hdr(skb
);
4847 tcp_hdr(skb
)->check
= ~csum_tcpudp_magic(iph
->saddr
,
4851 type_tucmd
|= E1000_ADVTXD_TUCMD_IPV4
;
4852 first
->tx_flags
|= IGB_TX_FLAGS_TSO
|
4855 } else if (skb_is_gso_v6(skb
)) {
4856 ipv6_hdr(skb
)->payload_len
= 0;
4857 tcp_hdr(skb
)->check
= ~csum_ipv6_magic(&ipv6_hdr(skb
)->saddr
,
4858 &ipv6_hdr(skb
)->daddr
,
4860 first
->tx_flags
|= IGB_TX_FLAGS_TSO
|
4864 /* compute header lengths */
4865 l4len
= tcp_hdrlen(skb
);
4866 *hdr_len
= skb_transport_offset(skb
) + l4len
;
4868 /* update gso size and bytecount with header size */
4869 first
->gso_segs
= skb_shinfo(skb
)->gso_segs
;
4870 first
->bytecount
+= (first
->gso_segs
- 1) * *hdr_len
;
4873 mss_l4len_idx
= l4len
<< E1000_ADVTXD_L4LEN_SHIFT
;
4874 mss_l4len_idx
|= skb_shinfo(skb
)->gso_size
<< E1000_ADVTXD_MSS_SHIFT
;
4876 /* VLAN MACLEN IPLEN */
4877 vlan_macip_lens
= skb_network_header_len(skb
);
4878 vlan_macip_lens
|= skb_network_offset(skb
) << E1000_ADVTXD_MACLEN_SHIFT
;
4879 vlan_macip_lens
|= first
->tx_flags
& IGB_TX_FLAGS_VLAN_MASK
;
4881 igb_tx_ctxtdesc(tx_ring
, vlan_macip_lens
, type_tucmd
, mss_l4len_idx
);
4886 static void igb_tx_csum(struct igb_ring
*tx_ring
, struct igb_tx_buffer
*first
)
4888 struct sk_buff
*skb
= first
->skb
;
4889 u32 vlan_macip_lens
= 0;
4890 u32 mss_l4len_idx
= 0;
4893 if (skb
->ip_summed
!= CHECKSUM_PARTIAL
) {
4894 if (!(first
->tx_flags
& IGB_TX_FLAGS_VLAN
))
4899 switch (first
->protocol
) {
4900 case htons(ETH_P_IP
):
4901 vlan_macip_lens
|= skb_network_header_len(skb
);
4902 type_tucmd
|= E1000_ADVTXD_TUCMD_IPV4
;
4903 l4_hdr
= ip_hdr(skb
)->protocol
;
4905 case htons(ETH_P_IPV6
):
4906 vlan_macip_lens
|= skb_network_header_len(skb
);
4907 l4_hdr
= ipv6_hdr(skb
)->nexthdr
;
4910 if (unlikely(net_ratelimit())) {
4911 dev_warn(tx_ring
->dev
,
4912 "partial checksum but proto=%x!\n",
4920 type_tucmd
|= E1000_ADVTXD_TUCMD_L4T_TCP
;
4921 mss_l4len_idx
= tcp_hdrlen(skb
) <<
4922 E1000_ADVTXD_L4LEN_SHIFT
;
4925 type_tucmd
|= E1000_ADVTXD_TUCMD_L4T_SCTP
;
4926 mss_l4len_idx
= sizeof(struct sctphdr
) <<
4927 E1000_ADVTXD_L4LEN_SHIFT
;
4930 mss_l4len_idx
= sizeof(struct udphdr
) <<
4931 E1000_ADVTXD_L4LEN_SHIFT
;
4934 if (unlikely(net_ratelimit())) {
4935 dev_warn(tx_ring
->dev
,
4936 "partial checksum but l4 proto=%x!\n",
4942 /* update TX checksum flag */
4943 first
->tx_flags
|= IGB_TX_FLAGS_CSUM
;
4946 vlan_macip_lens
|= skb_network_offset(skb
) << E1000_ADVTXD_MACLEN_SHIFT
;
4947 vlan_macip_lens
|= first
->tx_flags
& IGB_TX_FLAGS_VLAN_MASK
;
4949 igb_tx_ctxtdesc(tx_ring
, vlan_macip_lens
, type_tucmd
, mss_l4len_idx
);
4952 #define IGB_SET_FLAG(_input, _flag, _result) \
4953 ((_flag <= _result) ? \
4954 ((u32)(_input & _flag) * (_result / _flag)) : \
4955 ((u32)(_input & _flag) / (_flag / _result)))
4957 static u32
igb_tx_cmd_type(struct sk_buff
*skb
, u32 tx_flags
)
4959 /* set type for advanced descriptor with frame checksum insertion */
4960 u32 cmd_type
= E1000_ADVTXD_DTYP_DATA
|
4961 E1000_ADVTXD_DCMD_DEXT
|
4962 E1000_ADVTXD_DCMD_IFCS
;
4964 /* set HW vlan bit if vlan is present */
4965 cmd_type
|= IGB_SET_FLAG(tx_flags
, IGB_TX_FLAGS_VLAN
,
4966 (E1000_ADVTXD_DCMD_VLE
));
4968 /* set segmentation bits for TSO */
4969 cmd_type
|= IGB_SET_FLAG(tx_flags
, IGB_TX_FLAGS_TSO
,
4970 (E1000_ADVTXD_DCMD_TSE
));
4972 /* set timestamp bit if present */
4973 cmd_type
|= IGB_SET_FLAG(tx_flags
, IGB_TX_FLAGS_TSTAMP
,
4974 (E1000_ADVTXD_MAC_TSTAMP
));
4976 /* insert frame checksum */
4977 cmd_type
^= IGB_SET_FLAG(skb
->no_fcs
, 1, E1000_ADVTXD_DCMD_IFCS
);
4982 static void igb_tx_olinfo_status(struct igb_ring
*tx_ring
,
4983 union e1000_adv_tx_desc
*tx_desc
,
4984 u32 tx_flags
, unsigned int paylen
)
4986 u32 olinfo_status
= paylen
<< E1000_ADVTXD_PAYLEN_SHIFT
;
4988 /* 82575 requires a unique index per ring */
4989 if (test_bit(IGB_RING_FLAG_TX_CTX_IDX
, &tx_ring
->flags
))
4990 olinfo_status
|= tx_ring
->reg_idx
<< 4;
4992 /* insert L4 checksum */
4993 olinfo_status
|= IGB_SET_FLAG(tx_flags
,
4995 (E1000_TXD_POPTS_TXSM
<< 8));
4997 /* insert IPv4 checksum */
4998 olinfo_status
|= IGB_SET_FLAG(tx_flags
,
5000 (E1000_TXD_POPTS_IXSM
<< 8));
5002 tx_desc
->read
.olinfo_status
= cpu_to_le32(olinfo_status
);
5005 static int __igb_maybe_stop_tx(struct igb_ring
*tx_ring
, const u16 size
)
5007 struct net_device
*netdev
= tx_ring
->netdev
;
5009 netif_stop_subqueue(netdev
, tx_ring
->queue_index
);
5011 /* Herbert's original patch had:
5012 * smp_mb__after_netif_stop_queue();
5013 * but since that doesn't exist yet, just open code it.
5017 /* We need to check again in a case another CPU has just
5018 * made room available.
5020 if (igb_desc_unused(tx_ring
) < size
)
5024 netif_wake_subqueue(netdev
, tx_ring
->queue_index
);
5026 u64_stats_update_begin(&tx_ring
->tx_syncp2
);
5027 tx_ring
->tx_stats
.restart_queue2
++;
5028 u64_stats_update_end(&tx_ring
->tx_syncp2
);
5033 static inline int igb_maybe_stop_tx(struct igb_ring
*tx_ring
, const u16 size
)
5035 if (igb_desc_unused(tx_ring
) >= size
)
5037 return __igb_maybe_stop_tx(tx_ring
, size
);
5040 static void igb_tx_map(struct igb_ring
*tx_ring
,
5041 struct igb_tx_buffer
*first
,
5044 struct sk_buff
*skb
= first
->skb
;
5045 struct igb_tx_buffer
*tx_buffer
;
5046 union e1000_adv_tx_desc
*tx_desc
;
5047 struct skb_frag_struct
*frag
;
5049 unsigned int data_len
, size
;
5050 u32 tx_flags
= first
->tx_flags
;
5051 u32 cmd_type
= igb_tx_cmd_type(skb
, tx_flags
);
5052 u16 i
= tx_ring
->next_to_use
;
5054 tx_desc
= IGB_TX_DESC(tx_ring
, i
);
5056 igb_tx_olinfo_status(tx_ring
, tx_desc
, tx_flags
, skb
->len
- hdr_len
);
5058 size
= skb_headlen(skb
);
5059 data_len
= skb
->data_len
;
5061 dma
= dma_map_single(tx_ring
->dev
, skb
->data
, size
, DMA_TO_DEVICE
);
5065 for (frag
= &skb_shinfo(skb
)->frags
[0];; frag
++) {
5066 if (dma_mapping_error(tx_ring
->dev
, dma
))
5069 /* record length, and DMA address */
5070 dma_unmap_len_set(tx_buffer
, len
, size
);
5071 dma_unmap_addr_set(tx_buffer
, dma
, dma
);
5073 tx_desc
->read
.buffer_addr
= cpu_to_le64(dma
);
5075 while (unlikely(size
> IGB_MAX_DATA_PER_TXD
)) {
5076 tx_desc
->read
.cmd_type_len
=
5077 cpu_to_le32(cmd_type
^ IGB_MAX_DATA_PER_TXD
);
5081 if (i
== tx_ring
->count
) {
5082 tx_desc
= IGB_TX_DESC(tx_ring
, 0);
5085 tx_desc
->read
.olinfo_status
= 0;
5087 dma
+= IGB_MAX_DATA_PER_TXD
;
5088 size
-= IGB_MAX_DATA_PER_TXD
;
5090 tx_desc
->read
.buffer_addr
= cpu_to_le64(dma
);
5093 if (likely(!data_len
))
5096 tx_desc
->read
.cmd_type_len
= cpu_to_le32(cmd_type
^ size
);
5100 if (i
== tx_ring
->count
) {
5101 tx_desc
= IGB_TX_DESC(tx_ring
, 0);
5104 tx_desc
->read
.olinfo_status
= 0;
5106 size
= skb_frag_size(frag
);
5109 dma
= skb_frag_dma_map(tx_ring
->dev
, frag
, 0,
5110 size
, DMA_TO_DEVICE
);
5112 tx_buffer
= &tx_ring
->tx_buffer_info
[i
];
5115 /* write last descriptor with RS and EOP bits */
5116 cmd_type
|= size
| IGB_TXD_DCMD
;
5117 tx_desc
->read
.cmd_type_len
= cpu_to_le32(cmd_type
);
5119 netdev_tx_sent_queue(txring_txq(tx_ring
), first
->bytecount
);
5121 /* set the timestamp */
5122 first
->time_stamp
= jiffies
;
5124 /* Force memory writes to complete before letting h/w know there
5125 * are new descriptors to fetch. (Only applicable for weak-ordered
5126 * memory model archs, such as IA-64).
5128 * We also need this memory barrier to make certain all of the
5129 * status bits have been updated before next_to_watch is written.
5133 /* set next_to_watch value indicating a packet is present */
5134 first
->next_to_watch
= tx_desc
;
5137 if (i
== tx_ring
->count
)
5140 tx_ring
->next_to_use
= i
;
5142 /* Make sure there is space in the ring for the next send. */
5143 igb_maybe_stop_tx(tx_ring
, DESC_NEEDED
);
5145 if (netif_xmit_stopped(txring_txq(tx_ring
)) || !skb
->xmit_more
) {
5146 writel(i
, tx_ring
->tail
);
5148 /* we need this if more than one processor can write to our tail
5149 * at a time, it synchronizes IO on IA64/Altix systems
5156 dev_err(tx_ring
->dev
, "TX DMA map failed\n");
5158 /* clear dma mappings for failed tx_buffer_info map */
5160 tx_buffer
= &tx_ring
->tx_buffer_info
[i
];
5161 igb_unmap_and_free_tx_resource(tx_ring
, tx_buffer
);
5162 if (tx_buffer
== first
)
5169 tx_ring
->next_to_use
= i
;
5172 netdev_tx_t
igb_xmit_frame_ring(struct sk_buff
*skb
,
5173 struct igb_ring
*tx_ring
)
5175 struct igb_tx_buffer
*first
;
5179 u16 count
= TXD_USE_COUNT(skb_headlen(skb
));
5180 __be16 protocol
= vlan_get_protocol(skb
);
5183 /* need: 1 descriptor per page * PAGE_SIZE/IGB_MAX_DATA_PER_TXD,
5184 * + 1 desc for skb_headlen/IGB_MAX_DATA_PER_TXD,
5185 * + 2 desc gap to keep tail from touching head,
5186 * + 1 desc for context descriptor,
5187 * otherwise try next time
5189 for (f
= 0; f
< skb_shinfo(skb
)->nr_frags
; f
++)
5190 count
+= TXD_USE_COUNT(skb_shinfo(skb
)->frags
[f
].size
);
5192 if (igb_maybe_stop_tx(tx_ring
, count
+ 3)) {
5193 /* this is a hard error */
5194 return NETDEV_TX_BUSY
;
5197 /* record the location of the first descriptor for this packet */
5198 first
= &tx_ring
->tx_buffer_info
[tx_ring
->next_to_use
];
5200 first
->bytecount
= skb
->len
;
5201 first
->gso_segs
= 1;
5203 if (unlikely(skb_shinfo(skb
)->tx_flags
& SKBTX_HW_TSTAMP
)) {
5204 struct igb_adapter
*adapter
= netdev_priv(tx_ring
->netdev
);
5206 if (!test_and_set_bit_lock(__IGB_PTP_TX_IN_PROGRESS
,
5208 skb_shinfo(skb
)->tx_flags
|= SKBTX_IN_PROGRESS
;
5209 tx_flags
|= IGB_TX_FLAGS_TSTAMP
;
5211 adapter
->ptp_tx_skb
= skb_get(skb
);
5212 adapter
->ptp_tx_start
= jiffies
;
5213 if (adapter
->hw
.mac
.type
== e1000_82576
)
5214 schedule_work(&adapter
->ptp_tx_work
);
5218 skb_tx_timestamp(skb
);
5220 if (skb_vlan_tag_present(skb
)) {
5221 tx_flags
|= IGB_TX_FLAGS_VLAN
;
5222 tx_flags
|= (skb_vlan_tag_get(skb
) << IGB_TX_FLAGS_VLAN_SHIFT
);
5225 /* record initial flags and protocol */
5226 first
->tx_flags
= tx_flags
;
5227 first
->protocol
= protocol
;
5229 tso
= igb_tso(tx_ring
, first
, &hdr_len
);
5233 igb_tx_csum(tx_ring
, first
);
5235 igb_tx_map(tx_ring
, first
, hdr_len
);
5237 return NETDEV_TX_OK
;
5240 igb_unmap_and_free_tx_resource(tx_ring
, first
);
5242 return NETDEV_TX_OK
;
5245 static inline struct igb_ring
*igb_tx_queue_mapping(struct igb_adapter
*adapter
,
5246 struct sk_buff
*skb
)
5248 unsigned int r_idx
= skb
->queue_mapping
;
5250 if (r_idx
>= adapter
->num_tx_queues
)
5251 r_idx
= r_idx
% adapter
->num_tx_queues
;
5253 return adapter
->tx_ring
[r_idx
];
5256 static netdev_tx_t
igb_xmit_frame(struct sk_buff
*skb
,
5257 struct net_device
*netdev
)
5259 struct igb_adapter
*adapter
= netdev_priv(netdev
);
5261 /* The minimum packet size with TCTL.PSP set is 17 so pad the skb
5262 * in order to meet this minimum size requirement.
5264 if (skb_put_padto(skb
, 17))
5265 return NETDEV_TX_OK
;
5267 return igb_xmit_frame_ring(skb
, igb_tx_queue_mapping(adapter
, skb
));
5271 * igb_tx_timeout - Respond to a Tx Hang
5272 * @netdev: network interface device structure
5274 static void igb_tx_timeout(struct net_device
*netdev
)
5276 struct igb_adapter
*adapter
= netdev_priv(netdev
);
5277 struct e1000_hw
*hw
= &adapter
->hw
;
5279 /* Do the reset outside of interrupt context */
5280 adapter
->tx_timeout_count
++;
5282 if (hw
->mac
.type
>= e1000_82580
)
5283 hw
->dev_spec
._82575
.global_device_reset
= true;
5285 schedule_work(&adapter
->reset_task
);
5287 (adapter
->eims_enable_mask
& ~adapter
->eims_other
));
5290 static void igb_reset_task(struct work_struct
*work
)
5292 struct igb_adapter
*adapter
;
5293 adapter
= container_of(work
, struct igb_adapter
, reset_task
);
5296 netdev_err(adapter
->netdev
, "Reset adapter\n");
5297 igb_reinit_locked(adapter
);
5301 * igb_get_stats64 - Get System Network Statistics
5302 * @netdev: network interface device structure
5303 * @stats: rtnl_link_stats64 pointer
5305 static struct rtnl_link_stats64
*igb_get_stats64(struct net_device
*netdev
,
5306 struct rtnl_link_stats64
*stats
)
5308 struct igb_adapter
*adapter
= netdev_priv(netdev
);
5310 spin_lock(&adapter
->stats64_lock
);
5311 igb_update_stats(adapter
, &adapter
->stats64
);
5312 memcpy(stats
, &adapter
->stats64
, sizeof(*stats
));
5313 spin_unlock(&adapter
->stats64_lock
);
5319 * igb_change_mtu - Change the Maximum Transfer Unit
5320 * @netdev: network interface device structure
5321 * @new_mtu: new value for maximum frame size
5323 * Returns 0 on success, negative on failure
5325 static int igb_change_mtu(struct net_device
*netdev
, int new_mtu
)
5327 struct igb_adapter
*adapter
= netdev_priv(netdev
);
5328 struct pci_dev
*pdev
= adapter
->pdev
;
5329 int max_frame
= new_mtu
+ ETH_HLEN
+ ETH_FCS_LEN
+ VLAN_HLEN
;
5331 if ((new_mtu
< 68) || (max_frame
> MAX_JUMBO_FRAME_SIZE
)) {
5332 dev_err(&pdev
->dev
, "Invalid MTU setting\n");
5336 #define MAX_STD_JUMBO_FRAME_SIZE 9238
5337 if (max_frame
> MAX_STD_JUMBO_FRAME_SIZE
) {
5338 dev_err(&pdev
->dev
, "MTU > 9216 not supported.\n");
5342 /* adjust max frame to be at least the size of a standard frame */
5343 if (max_frame
< (ETH_FRAME_LEN
+ ETH_FCS_LEN
))
5344 max_frame
= ETH_FRAME_LEN
+ ETH_FCS_LEN
;
5346 while (test_and_set_bit(__IGB_RESETTING
, &adapter
->state
))
5347 usleep_range(1000, 2000);
5349 /* igb_down has a dependency on max_frame_size */
5350 adapter
->max_frame_size
= max_frame
;
5352 if (netif_running(netdev
))
5355 dev_info(&pdev
->dev
, "changing MTU from %d to %d\n",
5356 netdev
->mtu
, new_mtu
);
5357 netdev
->mtu
= new_mtu
;
5359 if (netif_running(netdev
))
5364 clear_bit(__IGB_RESETTING
, &adapter
->state
);
5370 * igb_update_stats - Update the board statistics counters
5371 * @adapter: board private structure
5373 void igb_update_stats(struct igb_adapter
*adapter
,
5374 struct rtnl_link_stats64
*net_stats
)
5376 struct e1000_hw
*hw
= &adapter
->hw
;
5377 struct pci_dev
*pdev
= adapter
->pdev
;
5382 u64 _bytes
, _packets
;
5384 /* Prevent stats update while adapter is being reset, or if the pci
5385 * connection is down.
5387 if (adapter
->link_speed
== 0)
5389 if (pci_channel_offline(pdev
))
5396 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
5397 struct igb_ring
*ring
= adapter
->rx_ring
[i
];
5398 u32 rqdpc
= rd32(E1000_RQDPC(i
));
5399 if (hw
->mac
.type
>= e1000_i210
)
5400 wr32(E1000_RQDPC(i
), 0);
5403 ring
->rx_stats
.drops
+= rqdpc
;
5404 net_stats
->rx_fifo_errors
+= rqdpc
;
5408 start
= u64_stats_fetch_begin_irq(&ring
->rx_syncp
);
5409 _bytes
= ring
->rx_stats
.bytes
;
5410 _packets
= ring
->rx_stats
.packets
;
5411 } while (u64_stats_fetch_retry_irq(&ring
->rx_syncp
, start
));
5413 packets
+= _packets
;
5416 net_stats
->rx_bytes
= bytes
;
5417 net_stats
->rx_packets
= packets
;
5421 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
5422 struct igb_ring
*ring
= adapter
->tx_ring
[i
];
5424 start
= u64_stats_fetch_begin_irq(&ring
->tx_syncp
);
5425 _bytes
= ring
->tx_stats
.bytes
;
5426 _packets
= ring
->tx_stats
.packets
;
5427 } while (u64_stats_fetch_retry_irq(&ring
->tx_syncp
, start
));
5429 packets
+= _packets
;
5431 net_stats
->tx_bytes
= bytes
;
5432 net_stats
->tx_packets
= packets
;
5435 /* read stats registers */
5436 adapter
->stats
.crcerrs
+= rd32(E1000_CRCERRS
);
5437 adapter
->stats
.gprc
+= rd32(E1000_GPRC
);
5438 adapter
->stats
.gorc
+= rd32(E1000_GORCL
);
5439 rd32(E1000_GORCH
); /* clear GORCL */
5440 adapter
->stats
.bprc
+= rd32(E1000_BPRC
);
5441 adapter
->stats
.mprc
+= rd32(E1000_MPRC
);
5442 adapter
->stats
.roc
+= rd32(E1000_ROC
);
5444 adapter
->stats
.prc64
+= rd32(E1000_PRC64
);
5445 adapter
->stats
.prc127
+= rd32(E1000_PRC127
);
5446 adapter
->stats
.prc255
+= rd32(E1000_PRC255
);
5447 adapter
->stats
.prc511
+= rd32(E1000_PRC511
);
5448 adapter
->stats
.prc1023
+= rd32(E1000_PRC1023
);
5449 adapter
->stats
.prc1522
+= rd32(E1000_PRC1522
);
5450 adapter
->stats
.symerrs
+= rd32(E1000_SYMERRS
);
5451 adapter
->stats
.sec
+= rd32(E1000_SEC
);
5453 mpc
= rd32(E1000_MPC
);
5454 adapter
->stats
.mpc
+= mpc
;
5455 net_stats
->rx_fifo_errors
+= mpc
;
5456 adapter
->stats
.scc
+= rd32(E1000_SCC
);
5457 adapter
->stats
.ecol
+= rd32(E1000_ECOL
);
5458 adapter
->stats
.mcc
+= rd32(E1000_MCC
);
5459 adapter
->stats
.latecol
+= rd32(E1000_LATECOL
);
5460 adapter
->stats
.dc
+= rd32(E1000_DC
);
5461 adapter
->stats
.rlec
+= rd32(E1000_RLEC
);
5462 adapter
->stats
.xonrxc
+= rd32(E1000_XONRXC
);
5463 adapter
->stats
.xontxc
+= rd32(E1000_XONTXC
);
5464 adapter
->stats
.xoffrxc
+= rd32(E1000_XOFFRXC
);
5465 adapter
->stats
.xofftxc
+= rd32(E1000_XOFFTXC
);
5466 adapter
->stats
.fcruc
+= rd32(E1000_FCRUC
);
5467 adapter
->stats
.gptc
+= rd32(E1000_GPTC
);
5468 adapter
->stats
.gotc
+= rd32(E1000_GOTCL
);
5469 rd32(E1000_GOTCH
); /* clear GOTCL */
5470 adapter
->stats
.rnbc
+= rd32(E1000_RNBC
);
5471 adapter
->stats
.ruc
+= rd32(E1000_RUC
);
5472 adapter
->stats
.rfc
+= rd32(E1000_RFC
);
5473 adapter
->stats
.rjc
+= rd32(E1000_RJC
);
5474 adapter
->stats
.tor
+= rd32(E1000_TORH
);
5475 adapter
->stats
.tot
+= rd32(E1000_TOTH
);
5476 adapter
->stats
.tpr
+= rd32(E1000_TPR
);
5478 adapter
->stats
.ptc64
+= rd32(E1000_PTC64
);
5479 adapter
->stats
.ptc127
+= rd32(E1000_PTC127
);
5480 adapter
->stats
.ptc255
+= rd32(E1000_PTC255
);
5481 adapter
->stats
.ptc511
+= rd32(E1000_PTC511
);
5482 adapter
->stats
.ptc1023
+= rd32(E1000_PTC1023
);
5483 adapter
->stats
.ptc1522
+= rd32(E1000_PTC1522
);
5485 adapter
->stats
.mptc
+= rd32(E1000_MPTC
);
5486 adapter
->stats
.bptc
+= rd32(E1000_BPTC
);
5488 adapter
->stats
.tpt
+= rd32(E1000_TPT
);
5489 adapter
->stats
.colc
+= rd32(E1000_COLC
);
5491 adapter
->stats
.algnerrc
+= rd32(E1000_ALGNERRC
);
5492 /* read internal phy specific stats */
5493 reg
= rd32(E1000_CTRL_EXT
);
5494 if (!(reg
& E1000_CTRL_EXT_LINK_MODE_MASK
)) {
5495 adapter
->stats
.rxerrc
+= rd32(E1000_RXERRC
);
5497 /* this stat has invalid values on i210/i211 */
5498 if ((hw
->mac
.type
!= e1000_i210
) &&
5499 (hw
->mac
.type
!= e1000_i211
))
5500 adapter
->stats
.tncrs
+= rd32(E1000_TNCRS
);
5503 adapter
->stats
.tsctc
+= rd32(E1000_TSCTC
);
5504 adapter
->stats
.tsctfc
+= rd32(E1000_TSCTFC
);
5506 adapter
->stats
.iac
+= rd32(E1000_IAC
);
5507 adapter
->stats
.icrxoc
+= rd32(E1000_ICRXOC
);
5508 adapter
->stats
.icrxptc
+= rd32(E1000_ICRXPTC
);
5509 adapter
->stats
.icrxatc
+= rd32(E1000_ICRXATC
);
5510 adapter
->stats
.ictxptc
+= rd32(E1000_ICTXPTC
);
5511 adapter
->stats
.ictxatc
+= rd32(E1000_ICTXATC
);
5512 adapter
->stats
.ictxqec
+= rd32(E1000_ICTXQEC
);
5513 adapter
->stats
.ictxqmtc
+= rd32(E1000_ICTXQMTC
);
5514 adapter
->stats
.icrxdmtc
+= rd32(E1000_ICRXDMTC
);
5516 /* Fill out the OS statistics structure */
5517 net_stats
->multicast
= adapter
->stats
.mprc
;
5518 net_stats
->collisions
= adapter
->stats
.colc
;
5522 /* RLEC on some newer hardware can be incorrect so build
5523 * our own version based on RUC and ROC
5525 net_stats
->rx_errors
= adapter
->stats
.rxerrc
+
5526 adapter
->stats
.crcerrs
+ adapter
->stats
.algnerrc
+
5527 adapter
->stats
.ruc
+ adapter
->stats
.roc
+
5528 adapter
->stats
.cexterr
;
5529 net_stats
->rx_length_errors
= adapter
->stats
.ruc
+
5531 net_stats
->rx_crc_errors
= adapter
->stats
.crcerrs
;
5532 net_stats
->rx_frame_errors
= adapter
->stats
.algnerrc
;
5533 net_stats
->rx_missed_errors
= adapter
->stats
.mpc
;
5536 net_stats
->tx_errors
= adapter
->stats
.ecol
+
5537 adapter
->stats
.latecol
;
5538 net_stats
->tx_aborted_errors
= adapter
->stats
.ecol
;
5539 net_stats
->tx_window_errors
= adapter
->stats
.latecol
;
5540 net_stats
->tx_carrier_errors
= adapter
->stats
.tncrs
;
5542 /* Tx Dropped needs to be maintained elsewhere */
5544 /* Management Stats */
5545 adapter
->stats
.mgptc
+= rd32(E1000_MGTPTC
);
5546 adapter
->stats
.mgprc
+= rd32(E1000_MGTPRC
);
5547 adapter
->stats
.mgpdc
+= rd32(E1000_MGTPDC
);
5550 reg
= rd32(E1000_MANC
);
5551 if (reg
& E1000_MANC_EN_BMC2OS
) {
5552 adapter
->stats
.o2bgptc
+= rd32(E1000_O2BGPTC
);
5553 adapter
->stats
.o2bspc
+= rd32(E1000_O2BSPC
);
5554 adapter
->stats
.b2ospc
+= rd32(E1000_B2OSPC
);
5555 adapter
->stats
.b2ogprc
+= rd32(E1000_B2OGPRC
);
5559 static void igb_tsync_interrupt(struct igb_adapter
*adapter
)
5561 struct e1000_hw
*hw
= &adapter
->hw
;
5562 struct ptp_clock_event event
;
5563 struct timespec64 ts
;
5564 u32 ack
= 0, tsauxc
, sec
, nsec
, tsicr
= rd32(E1000_TSICR
);
5566 if (tsicr
& TSINTR_SYS_WRAP
) {
5567 event
.type
= PTP_CLOCK_PPS
;
5568 if (adapter
->ptp_caps
.pps
)
5569 ptp_clock_event(adapter
->ptp_clock
, &event
);
5571 dev_err(&adapter
->pdev
->dev
, "unexpected SYS WRAP");
5572 ack
|= TSINTR_SYS_WRAP
;
5575 if (tsicr
& E1000_TSICR_TXTS
) {
5576 /* retrieve hardware timestamp */
5577 schedule_work(&adapter
->ptp_tx_work
);
5578 ack
|= E1000_TSICR_TXTS
;
5581 if (tsicr
& TSINTR_TT0
) {
5582 spin_lock(&adapter
->tmreg_lock
);
5583 ts
= timespec64_add(adapter
->perout
[0].start
,
5584 adapter
->perout
[0].period
);
5585 /* u32 conversion of tv_sec is safe until y2106 */
5586 wr32(E1000_TRGTTIML0
, ts
.tv_nsec
);
5587 wr32(E1000_TRGTTIMH0
, (u32
)ts
.tv_sec
);
5588 tsauxc
= rd32(E1000_TSAUXC
);
5589 tsauxc
|= TSAUXC_EN_TT0
;
5590 wr32(E1000_TSAUXC
, tsauxc
);
5591 adapter
->perout
[0].start
= ts
;
5592 spin_unlock(&adapter
->tmreg_lock
);
5596 if (tsicr
& TSINTR_TT1
) {
5597 spin_lock(&adapter
->tmreg_lock
);
5598 ts
= timespec64_add(adapter
->perout
[1].start
,
5599 adapter
->perout
[1].period
);
5600 wr32(E1000_TRGTTIML1
, ts
.tv_nsec
);
5601 wr32(E1000_TRGTTIMH1
, (u32
)ts
.tv_sec
);
5602 tsauxc
= rd32(E1000_TSAUXC
);
5603 tsauxc
|= TSAUXC_EN_TT1
;
5604 wr32(E1000_TSAUXC
, tsauxc
);
5605 adapter
->perout
[1].start
= ts
;
5606 spin_unlock(&adapter
->tmreg_lock
);
5610 if (tsicr
& TSINTR_AUTT0
) {
5611 nsec
= rd32(E1000_AUXSTMPL0
);
5612 sec
= rd32(E1000_AUXSTMPH0
);
5613 event
.type
= PTP_CLOCK_EXTTS
;
5615 event
.timestamp
= sec
* 1000000000ULL + nsec
;
5616 ptp_clock_event(adapter
->ptp_clock
, &event
);
5617 ack
|= TSINTR_AUTT0
;
5620 if (tsicr
& TSINTR_AUTT1
) {
5621 nsec
= rd32(E1000_AUXSTMPL1
);
5622 sec
= rd32(E1000_AUXSTMPH1
);
5623 event
.type
= PTP_CLOCK_EXTTS
;
5625 event
.timestamp
= sec
* 1000000000ULL + nsec
;
5626 ptp_clock_event(adapter
->ptp_clock
, &event
);
5627 ack
|= TSINTR_AUTT1
;
5630 /* acknowledge the interrupts */
5631 wr32(E1000_TSICR
, ack
);
5634 static irqreturn_t
igb_msix_other(int irq
, void *data
)
5636 struct igb_adapter
*adapter
= data
;
5637 struct e1000_hw
*hw
= &adapter
->hw
;
5638 u32 icr
= rd32(E1000_ICR
);
5639 /* reading ICR causes bit 31 of EICR to be cleared */
5641 if (icr
& E1000_ICR_DRSTA
)
5642 schedule_work(&adapter
->reset_task
);
5644 if (icr
& E1000_ICR_DOUTSYNC
) {
5645 /* HW is reporting DMA is out of sync */
5646 adapter
->stats
.doosync
++;
5647 /* The DMA Out of Sync is also indication of a spoof event
5648 * in IOV mode. Check the Wrong VM Behavior register to
5649 * see if it is really a spoof event.
5651 igb_check_wvbr(adapter
);
5654 /* Check for a mailbox event */
5655 if (icr
& E1000_ICR_VMMB
)
5656 igb_msg_task(adapter
);
5658 if (icr
& E1000_ICR_LSC
) {
5659 hw
->mac
.get_link_status
= 1;
5660 /* guard against interrupt when we're going down */
5661 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
5662 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
5665 if (icr
& E1000_ICR_TS
)
5666 igb_tsync_interrupt(adapter
);
5668 wr32(E1000_EIMS
, adapter
->eims_other
);
5673 static void igb_write_itr(struct igb_q_vector
*q_vector
)
5675 struct igb_adapter
*adapter
= q_vector
->adapter
;
5676 u32 itr_val
= q_vector
->itr_val
& 0x7FFC;
5678 if (!q_vector
->set_itr
)
5684 if (adapter
->hw
.mac
.type
== e1000_82575
)
5685 itr_val
|= itr_val
<< 16;
5687 itr_val
|= E1000_EITR_CNT_IGNR
;
5689 writel(itr_val
, q_vector
->itr_register
);
5690 q_vector
->set_itr
= 0;
5693 static irqreturn_t
igb_msix_ring(int irq
, void *data
)
5695 struct igb_q_vector
*q_vector
= data
;
5697 /* Write the ITR value calculated from the previous interrupt. */
5698 igb_write_itr(q_vector
);
5700 napi_schedule(&q_vector
->napi
);
5705 #ifdef CONFIG_IGB_DCA
5706 static void igb_update_tx_dca(struct igb_adapter
*adapter
,
5707 struct igb_ring
*tx_ring
,
5710 struct e1000_hw
*hw
= &adapter
->hw
;
5711 u32 txctrl
= dca3_get_tag(tx_ring
->dev
, cpu
);
5713 if (hw
->mac
.type
!= e1000_82575
)
5714 txctrl
<<= E1000_DCA_TXCTRL_CPUID_SHIFT
;
5716 /* We can enable relaxed ordering for reads, but not writes when
5717 * DCA is enabled. This is due to a known issue in some chipsets
5718 * which will cause the DCA tag to be cleared.
5720 txctrl
|= E1000_DCA_TXCTRL_DESC_RRO_EN
|
5721 E1000_DCA_TXCTRL_DATA_RRO_EN
|
5722 E1000_DCA_TXCTRL_DESC_DCA_EN
;
5724 wr32(E1000_DCA_TXCTRL(tx_ring
->reg_idx
), txctrl
);
5727 static void igb_update_rx_dca(struct igb_adapter
*adapter
,
5728 struct igb_ring
*rx_ring
,
5731 struct e1000_hw
*hw
= &adapter
->hw
;
5732 u32 rxctrl
= dca3_get_tag(&adapter
->pdev
->dev
, cpu
);
5734 if (hw
->mac
.type
!= e1000_82575
)
5735 rxctrl
<<= E1000_DCA_RXCTRL_CPUID_SHIFT
;
5737 /* We can enable relaxed ordering for reads, but not writes when
5738 * DCA is enabled. This is due to a known issue in some chipsets
5739 * which will cause the DCA tag to be cleared.
5741 rxctrl
|= E1000_DCA_RXCTRL_DESC_RRO_EN
|
5742 E1000_DCA_RXCTRL_DESC_DCA_EN
;
5744 wr32(E1000_DCA_RXCTRL(rx_ring
->reg_idx
), rxctrl
);
5747 static void igb_update_dca(struct igb_q_vector
*q_vector
)
5749 struct igb_adapter
*adapter
= q_vector
->adapter
;
5750 int cpu
= get_cpu();
5752 if (q_vector
->cpu
== cpu
)
5755 if (q_vector
->tx
.ring
)
5756 igb_update_tx_dca(adapter
, q_vector
->tx
.ring
, cpu
);
5758 if (q_vector
->rx
.ring
)
5759 igb_update_rx_dca(adapter
, q_vector
->rx
.ring
, cpu
);
5761 q_vector
->cpu
= cpu
;
5766 static void igb_setup_dca(struct igb_adapter
*adapter
)
5768 struct e1000_hw
*hw
= &adapter
->hw
;
5771 if (!(adapter
->flags
& IGB_FLAG_DCA_ENABLED
))
5774 /* Always use CB2 mode, difference is masked in the CB driver. */
5775 wr32(E1000_DCA_CTRL
, E1000_DCA_CTRL_DCA_MODE_CB2
);
5777 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
5778 adapter
->q_vector
[i
]->cpu
= -1;
5779 igb_update_dca(adapter
->q_vector
[i
]);
5783 static int __igb_notify_dca(struct device
*dev
, void *data
)
5785 struct net_device
*netdev
= dev_get_drvdata(dev
);
5786 struct igb_adapter
*adapter
= netdev_priv(netdev
);
5787 struct pci_dev
*pdev
= adapter
->pdev
;
5788 struct e1000_hw
*hw
= &adapter
->hw
;
5789 unsigned long event
= *(unsigned long *)data
;
5792 case DCA_PROVIDER_ADD
:
5793 /* if already enabled, don't do it again */
5794 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
)
5796 if (dca_add_requester(dev
) == 0) {
5797 adapter
->flags
|= IGB_FLAG_DCA_ENABLED
;
5798 dev_info(&pdev
->dev
, "DCA enabled\n");
5799 igb_setup_dca(adapter
);
5802 /* Fall Through since DCA is disabled. */
5803 case DCA_PROVIDER_REMOVE
:
5804 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
) {
5805 /* without this a class_device is left
5806 * hanging around in the sysfs model
5808 dca_remove_requester(dev
);
5809 dev_info(&pdev
->dev
, "DCA disabled\n");
5810 adapter
->flags
&= ~IGB_FLAG_DCA_ENABLED
;
5811 wr32(E1000_DCA_CTRL
, E1000_DCA_CTRL_DCA_MODE_DISABLE
);
5819 static int igb_notify_dca(struct notifier_block
*nb
, unsigned long event
,
5824 ret_val
= driver_for_each_device(&igb_driver
.driver
, NULL
, &event
,
5827 return ret_val
? NOTIFY_BAD
: NOTIFY_DONE
;
5829 #endif /* CONFIG_IGB_DCA */
5831 #ifdef CONFIG_PCI_IOV
5832 static int igb_vf_configure(struct igb_adapter
*adapter
, int vf
)
5834 unsigned char mac_addr
[ETH_ALEN
];
5836 eth_zero_addr(mac_addr
);
5837 igb_set_vf_mac(adapter
, vf
, mac_addr
);
5839 /* By default spoof check is enabled for all VFs */
5840 adapter
->vf_data
[vf
].spoofchk_enabled
= true;
5846 static void igb_ping_all_vfs(struct igb_adapter
*adapter
)
5848 struct e1000_hw
*hw
= &adapter
->hw
;
5852 for (i
= 0 ; i
< adapter
->vfs_allocated_count
; i
++) {
5853 ping
= E1000_PF_CONTROL_MSG
;
5854 if (adapter
->vf_data
[i
].flags
& IGB_VF_FLAG_CTS
)
5855 ping
|= E1000_VT_MSGTYPE_CTS
;
5856 igb_write_mbx(hw
, &ping
, 1, i
);
5860 static int igb_set_vf_promisc(struct igb_adapter
*adapter
, u32
*msgbuf
, u32 vf
)
5862 struct e1000_hw
*hw
= &adapter
->hw
;
5863 u32 vmolr
= rd32(E1000_VMOLR(vf
));
5864 struct vf_data_storage
*vf_data
= &adapter
->vf_data
[vf
];
5866 vf_data
->flags
&= ~(IGB_VF_FLAG_UNI_PROMISC
|
5867 IGB_VF_FLAG_MULTI_PROMISC
);
5868 vmolr
&= ~(E1000_VMOLR_ROPE
| E1000_VMOLR_ROMPE
| E1000_VMOLR_MPME
);
5870 if (*msgbuf
& E1000_VF_SET_PROMISC_MULTICAST
) {
5871 vmolr
|= E1000_VMOLR_MPME
;
5872 vf_data
->flags
|= IGB_VF_FLAG_MULTI_PROMISC
;
5873 *msgbuf
&= ~E1000_VF_SET_PROMISC_MULTICAST
;
5875 /* if we have hashes and we are clearing a multicast promisc
5876 * flag we need to write the hashes to the MTA as this step
5877 * was previously skipped
5879 if (vf_data
->num_vf_mc_hashes
> 30) {
5880 vmolr
|= E1000_VMOLR_MPME
;
5881 } else if (vf_data
->num_vf_mc_hashes
) {
5884 vmolr
|= E1000_VMOLR_ROMPE
;
5885 for (j
= 0; j
< vf_data
->num_vf_mc_hashes
; j
++)
5886 igb_mta_set(hw
, vf_data
->vf_mc_hashes
[j
]);
5890 wr32(E1000_VMOLR(vf
), vmolr
);
5892 /* there are flags left unprocessed, likely not supported */
5893 if (*msgbuf
& E1000_VT_MSGINFO_MASK
)
5899 static int igb_set_vf_multicasts(struct igb_adapter
*adapter
,
5900 u32
*msgbuf
, u32 vf
)
5902 int n
= (msgbuf
[0] & E1000_VT_MSGINFO_MASK
) >> E1000_VT_MSGINFO_SHIFT
;
5903 u16
*hash_list
= (u16
*)&msgbuf
[1];
5904 struct vf_data_storage
*vf_data
= &adapter
->vf_data
[vf
];
5907 /* salt away the number of multicast addresses assigned
5908 * to this VF for later use to restore when the PF multi cast
5911 vf_data
->num_vf_mc_hashes
= n
;
5913 /* only up to 30 hash values supported */
5917 /* store the hashes for later use */
5918 for (i
= 0; i
< n
; i
++)
5919 vf_data
->vf_mc_hashes
[i
] = hash_list
[i
];
5921 /* Flush and reset the mta with the new values */
5922 igb_set_rx_mode(adapter
->netdev
);
5927 static void igb_restore_vf_multicasts(struct igb_adapter
*adapter
)
5929 struct e1000_hw
*hw
= &adapter
->hw
;
5930 struct vf_data_storage
*vf_data
;
5933 for (i
= 0; i
< adapter
->vfs_allocated_count
; i
++) {
5934 u32 vmolr
= rd32(E1000_VMOLR(i
));
5936 vmolr
&= ~(E1000_VMOLR_ROMPE
| E1000_VMOLR_MPME
);
5938 vf_data
= &adapter
->vf_data
[i
];
5940 if ((vf_data
->num_vf_mc_hashes
> 30) ||
5941 (vf_data
->flags
& IGB_VF_FLAG_MULTI_PROMISC
)) {
5942 vmolr
|= E1000_VMOLR_MPME
;
5943 } else if (vf_data
->num_vf_mc_hashes
) {
5944 vmolr
|= E1000_VMOLR_ROMPE
;
5945 for (j
= 0; j
< vf_data
->num_vf_mc_hashes
; j
++)
5946 igb_mta_set(hw
, vf_data
->vf_mc_hashes
[j
]);
5948 wr32(E1000_VMOLR(i
), vmolr
);
5952 static void igb_clear_vf_vfta(struct igb_adapter
*adapter
, u32 vf
)
5954 struct e1000_hw
*hw
= &adapter
->hw
;
5955 u32 pool_mask
, vlvf_mask
, i
;
5957 /* create mask for VF and other pools */
5958 pool_mask
= E1000_VLVF_POOLSEL_MASK
;
5959 vlvf_mask
= 1 << (E1000_VLVF_POOLSEL_SHIFT
+ vf
);
5961 /* drop PF from pool bits */
5962 pool_mask
&= ~(1 << (E1000_VLVF_POOLSEL_SHIFT
+
5963 adapter
->vfs_allocated_count
));
5965 /* Find the vlan filter for this id */
5966 for (i
= E1000_VLVF_ARRAY_SIZE
; i
--;) {
5967 u32 vlvf
= rd32(E1000_VLVF(i
));
5968 u32 vfta_mask
, vid
, vfta
;
5970 /* remove the vf from the pool */
5971 if (!(vlvf
& vlvf_mask
))
5974 /* clear out bit from VLVF */
5977 /* if other pools are present, just remove ourselves */
5978 if (vlvf
& pool_mask
)
5981 /* if PF is present, leave VFTA */
5982 if (vlvf
& E1000_VLVF_POOLSEL_MASK
)
5985 vid
= vlvf
& E1000_VLVF_VLANID_MASK
;
5986 vfta_mask
= 1 << (vid
% 32);
5988 /* clear bit from VFTA */
5989 vfta
= adapter
->shadow_vfta
[vid
/ 32];
5990 if (vfta
& vfta_mask
)
5991 hw
->mac
.ops
.write_vfta(hw
, vid
/ 32, vfta
^ vfta_mask
);
5993 /* clear pool selection enable */
5994 if (adapter
->flags
& IGB_FLAG_VLAN_PROMISC
)
5995 vlvf
&= E1000_VLVF_POOLSEL_MASK
;
5999 /* clear pool bits */
6000 wr32(E1000_VLVF(i
), vlvf
);
6004 static int igb_find_vlvf_entry(struct e1000_hw
*hw
, u32 vlan
)
6009 /* short cut the special case */
6013 /* Search for the VLAN id in the VLVF entries */
6014 for (idx
= E1000_VLVF_ARRAY_SIZE
; --idx
;) {
6015 vlvf
= rd32(E1000_VLVF(idx
));
6016 if ((vlvf
& VLAN_VID_MASK
) == vlan
)
6023 void igb_update_pf_vlvf(struct igb_adapter
*adapter
, u32 vid
)
6025 struct e1000_hw
*hw
= &adapter
->hw
;
6029 idx
= igb_find_vlvf_entry(hw
, vid
);
6033 /* See if any other pools are set for this VLAN filter
6034 * entry other than the PF.
6036 pf_id
= adapter
->vfs_allocated_count
+ E1000_VLVF_POOLSEL_SHIFT
;
6037 bits
= ~(1 << pf_id
) & E1000_VLVF_POOLSEL_MASK
;
6038 bits
&= rd32(E1000_VLVF(idx
));
6040 /* Disable the filter so this falls into the default pool. */
6042 if (adapter
->flags
& IGB_FLAG_VLAN_PROMISC
)
6043 wr32(E1000_VLVF(idx
), 1 << pf_id
);
6045 wr32(E1000_VLVF(idx
), 0);
6049 static s32
igb_set_vf_vlan(struct igb_adapter
*adapter
, u32 vid
,
6052 int pf_id
= adapter
->vfs_allocated_count
;
6053 struct e1000_hw
*hw
= &adapter
->hw
;
6056 /* If VLAN overlaps with one the PF is currently monitoring make
6057 * sure that we are able to allocate a VLVF entry. This may be
6058 * redundant but it guarantees PF will maintain visibility to
6061 if (add
&& test_bit(vid
, adapter
->active_vlans
)) {
6062 err
= igb_vfta_set(hw
, vid
, pf_id
, true, false);
6067 err
= igb_vfta_set(hw
, vid
, vf
, add
, false);
6072 /* If we failed to add the VF VLAN or we are removing the VF VLAN
6073 * we may need to drop the PF pool bit in order to allow us to free
6074 * up the VLVF resources.
6076 if (test_bit(vid
, adapter
->active_vlans
) ||
6077 (adapter
->flags
& IGB_FLAG_VLAN_PROMISC
))
6078 igb_update_pf_vlvf(adapter
, vid
);
6083 static void igb_set_vmvir(struct igb_adapter
*adapter
, u32 vid
, u32 vf
)
6085 struct e1000_hw
*hw
= &adapter
->hw
;
6088 wr32(E1000_VMVIR(vf
), (vid
| E1000_VMVIR_VLANA_DEFAULT
));
6090 wr32(E1000_VMVIR(vf
), 0);
6093 static int igb_enable_port_vlan(struct igb_adapter
*adapter
, int vf
,
6098 err
= igb_set_vf_vlan(adapter
, vlan
, true, vf
);
6102 igb_set_vmvir(adapter
, vlan
| (qos
<< VLAN_PRIO_SHIFT
), vf
);
6103 igb_set_vmolr(adapter
, vf
, !vlan
);
6105 /* revoke access to previous VLAN */
6106 if (vlan
!= adapter
->vf_data
[vf
].pf_vlan
)
6107 igb_set_vf_vlan(adapter
, adapter
->vf_data
[vf
].pf_vlan
,
6110 adapter
->vf_data
[vf
].pf_vlan
= vlan
;
6111 adapter
->vf_data
[vf
].pf_qos
= qos
;
6112 dev_info(&adapter
->pdev
->dev
,
6113 "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan
, qos
, vf
);
6114 if (test_bit(__IGB_DOWN
, &adapter
->state
)) {
6115 dev_warn(&adapter
->pdev
->dev
,
6116 "The VF VLAN has been set, but the PF device is not up.\n");
6117 dev_warn(&adapter
->pdev
->dev
,
6118 "Bring the PF device up before attempting to use the VF device.\n");
6124 static int igb_disable_port_vlan(struct igb_adapter
*adapter
, int vf
)
6126 /* Restore tagless access via VLAN 0 */
6127 igb_set_vf_vlan(adapter
, 0, true, vf
);
6129 igb_set_vmvir(adapter
, 0, vf
);
6130 igb_set_vmolr(adapter
, vf
, true);
6132 /* Remove any PF assigned VLAN */
6133 if (adapter
->vf_data
[vf
].pf_vlan
)
6134 igb_set_vf_vlan(adapter
, adapter
->vf_data
[vf
].pf_vlan
,
6137 adapter
->vf_data
[vf
].pf_vlan
= 0;
6138 adapter
->vf_data
[vf
].pf_qos
= 0;
6143 static int igb_ndo_set_vf_vlan(struct net_device
*netdev
,
6144 int vf
, u16 vlan
, u8 qos
)
6146 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6148 if ((vf
>= adapter
->vfs_allocated_count
) || (vlan
> 4095) || (qos
> 7))
6151 return (vlan
|| qos
) ? igb_enable_port_vlan(adapter
, vf
, vlan
, qos
) :
6152 igb_disable_port_vlan(adapter
, vf
);
6155 static int igb_set_vf_vlan_msg(struct igb_adapter
*adapter
, u32
*msgbuf
, u32 vf
)
6157 int add
= (msgbuf
[0] & E1000_VT_MSGINFO_MASK
) >> E1000_VT_MSGINFO_SHIFT
;
6158 int vid
= (msgbuf
[1] & E1000_VLVF_VLANID_MASK
);
6160 if (adapter
->vf_data
[vf
].pf_vlan
)
6163 /* VLAN 0 is a special case, don't allow it to be removed */
6167 return igb_set_vf_vlan(adapter
, vid
, !!add
, vf
);
6170 static inline void igb_vf_reset(struct igb_adapter
*adapter
, u32 vf
)
6172 struct vf_data_storage
*vf_data
= &adapter
->vf_data
[vf
];
6174 /* clear flags - except flag that indicates PF has set the MAC */
6175 vf_data
->flags
&= IGB_VF_FLAG_PF_SET_MAC
;
6176 vf_data
->last_nack
= jiffies
;
6178 /* reset vlans for device */
6179 igb_clear_vf_vfta(adapter
, vf
);
6180 igb_set_vf_vlan(adapter
, vf_data
->pf_vlan
, true, vf
);
6181 igb_set_vmvir(adapter
, vf_data
->pf_vlan
|
6182 (vf_data
->pf_qos
<< VLAN_PRIO_SHIFT
), vf
);
6183 igb_set_vmolr(adapter
, vf
, !vf_data
->pf_vlan
);
6185 /* reset multicast table array for vf */
6186 adapter
->vf_data
[vf
].num_vf_mc_hashes
= 0;
6188 /* Flush and reset the mta with the new values */
6189 igb_set_rx_mode(adapter
->netdev
);
6192 static void igb_vf_reset_event(struct igb_adapter
*adapter
, u32 vf
)
6194 unsigned char *vf_mac
= adapter
->vf_data
[vf
].vf_mac_addresses
;
6196 /* clear mac address as we were hotplug removed/added */
6197 if (!(adapter
->vf_data
[vf
].flags
& IGB_VF_FLAG_PF_SET_MAC
))
6198 eth_zero_addr(vf_mac
);
6200 /* process remaining reset events */
6201 igb_vf_reset(adapter
, vf
);
6204 static void igb_vf_reset_msg(struct igb_adapter
*adapter
, u32 vf
)
6206 struct e1000_hw
*hw
= &adapter
->hw
;
6207 unsigned char *vf_mac
= adapter
->vf_data
[vf
].vf_mac_addresses
;
6208 int rar_entry
= hw
->mac
.rar_entry_count
- (vf
+ 1);
6210 u8
*addr
= (u8
*)(&msgbuf
[1]);
6212 /* process all the same items cleared in a function level reset */
6213 igb_vf_reset(adapter
, vf
);
6215 /* set vf mac address */
6216 igb_rar_set_qsel(adapter
, vf_mac
, rar_entry
, vf
);
6218 /* enable transmit and receive for vf */
6219 reg
= rd32(E1000_VFTE
);
6220 wr32(E1000_VFTE
, reg
| (1 << vf
));
6221 reg
= rd32(E1000_VFRE
);
6222 wr32(E1000_VFRE
, reg
| (1 << vf
));
6224 adapter
->vf_data
[vf
].flags
|= IGB_VF_FLAG_CTS
;
6226 /* reply to reset with ack and vf mac address */
6227 if (!is_zero_ether_addr(vf_mac
)) {
6228 msgbuf
[0] = E1000_VF_RESET
| E1000_VT_MSGTYPE_ACK
;
6229 memcpy(addr
, vf_mac
, ETH_ALEN
);
6231 msgbuf
[0] = E1000_VF_RESET
| E1000_VT_MSGTYPE_NACK
;
6233 igb_write_mbx(hw
, msgbuf
, 3, vf
);
6236 static int igb_set_vf_mac_addr(struct igb_adapter
*adapter
, u32
*msg
, int vf
)
6238 /* The VF MAC Address is stored in a packed array of bytes
6239 * starting at the second 32 bit word of the msg array
6241 unsigned char *addr
= (char *)&msg
[1];
6244 if (is_valid_ether_addr(addr
))
6245 err
= igb_set_vf_mac(adapter
, vf
, addr
);
6250 static void igb_rcv_ack_from_vf(struct igb_adapter
*adapter
, u32 vf
)
6252 struct e1000_hw
*hw
= &adapter
->hw
;
6253 struct vf_data_storage
*vf_data
= &adapter
->vf_data
[vf
];
6254 u32 msg
= E1000_VT_MSGTYPE_NACK
;
6256 /* if device isn't clear to send it shouldn't be reading either */
6257 if (!(vf_data
->flags
& IGB_VF_FLAG_CTS
) &&
6258 time_after(jiffies
, vf_data
->last_nack
+ (2 * HZ
))) {
6259 igb_write_mbx(hw
, &msg
, 1, vf
);
6260 vf_data
->last_nack
= jiffies
;
6264 static void igb_rcv_msg_from_vf(struct igb_adapter
*adapter
, u32 vf
)
6266 struct pci_dev
*pdev
= adapter
->pdev
;
6267 u32 msgbuf
[E1000_VFMAILBOX_SIZE
];
6268 struct e1000_hw
*hw
= &adapter
->hw
;
6269 struct vf_data_storage
*vf_data
= &adapter
->vf_data
[vf
];
6272 retval
= igb_read_mbx(hw
, msgbuf
, E1000_VFMAILBOX_SIZE
, vf
);
6275 /* if receive failed revoke VF CTS stats and restart init */
6276 dev_err(&pdev
->dev
, "Error receiving message from VF\n");
6277 vf_data
->flags
&= ~IGB_VF_FLAG_CTS
;
6278 if (!time_after(jiffies
, vf_data
->last_nack
+ (2 * HZ
)))
6283 /* this is a message we already processed, do nothing */
6284 if (msgbuf
[0] & (E1000_VT_MSGTYPE_ACK
| E1000_VT_MSGTYPE_NACK
))
6287 /* until the vf completes a reset it should not be
6288 * allowed to start any configuration.
6290 if (msgbuf
[0] == E1000_VF_RESET
) {
6291 igb_vf_reset_msg(adapter
, vf
);
6295 if (!(vf_data
->flags
& IGB_VF_FLAG_CTS
)) {
6296 if (!time_after(jiffies
, vf_data
->last_nack
+ (2 * HZ
)))
6302 switch ((msgbuf
[0] & 0xFFFF)) {
6303 case E1000_VF_SET_MAC_ADDR
:
6305 if (!(vf_data
->flags
& IGB_VF_FLAG_PF_SET_MAC
))
6306 retval
= igb_set_vf_mac_addr(adapter
, msgbuf
, vf
);
6308 dev_warn(&pdev
->dev
,
6309 "VF %d attempted to override administratively set MAC address\nReload the VF driver to resume operations\n",
6312 case E1000_VF_SET_PROMISC
:
6313 retval
= igb_set_vf_promisc(adapter
, msgbuf
, vf
);
6315 case E1000_VF_SET_MULTICAST
:
6316 retval
= igb_set_vf_multicasts(adapter
, msgbuf
, vf
);
6318 case E1000_VF_SET_LPE
:
6319 retval
= igb_set_vf_rlpml(adapter
, msgbuf
[1], vf
);
6321 case E1000_VF_SET_VLAN
:
6323 if (vf_data
->pf_vlan
)
6324 dev_warn(&pdev
->dev
,
6325 "VF %d attempted to override administratively set VLAN tag\nReload the VF driver to resume operations\n",
6328 retval
= igb_set_vf_vlan_msg(adapter
, msgbuf
, vf
);
6331 dev_err(&pdev
->dev
, "Unhandled Msg %08x\n", msgbuf
[0]);
6336 msgbuf
[0] |= E1000_VT_MSGTYPE_CTS
;
6338 /* notify the VF of the results of what it sent us */
6340 msgbuf
[0] |= E1000_VT_MSGTYPE_NACK
;
6342 msgbuf
[0] |= E1000_VT_MSGTYPE_ACK
;
6344 igb_write_mbx(hw
, msgbuf
, 1, vf
);
6347 static void igb_msg_task(struct igb_adapter
*adapter
)
6349 struct e1000_hw
*hw
= &adapter
->hw
;
6352 for (vf
= 0; vf
< adapter
->vfs_allocated_count
; vf
++) {
6353 /* process any reset requests */
6354 if (!igb_check_for_rst(hw
, vf
))
6355 igb_vf_reset_event(adapter
, vf
);
6357 /* process any messages pending */
6358 if (!igb_check_for_msg(hw
, vf
))
6359 igb_rcv_msg_from_vf(adapter
, vf
);
6361 /* process any acks */
6362 if (!igb_check_for_ack(hw
, vf
))
6363 igb_rcv_ack_from_vf(adapter
, vf
);
6368 * igb_set_uta - Set unicast filter table address
6369 * @adapter: board private structure
6370 * @set: boolean indicating if we are setting or clearing bits
6372 * The unicast table address is a register array of 32-bit registers.
6373 * The table is meant to be used in a way similar to how the MTA is used
6374 * however due to certain limitations in the hardware it is necessary to
6375 * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
6376 * enable bit to allow vlan tag stripping when promiscuous mode is enabled
6378 static void igb_set_uta(struct igb_adapter
*adapter
, bool set
)
6380 struct e1000_hw
*hw
= &adapter
->hw
;
6381 u32 uta
= set
? ~0 : 0;
6384 /* we only need to do this if VMDq is enabled */
6385 if (!adapter
->vfs_allocated_count
)
6388 for (i
= hw
->mac
.uta_reg_count
; i
--;)
6389 array_wr32(E1000_UTA
, i
, uta
);
6393 * igb_intr_msi - Interrupt Handler
6394 * @irq: interrupt number
6395 * @data: pointer to a network interface device structure
6397 static irqreturn_t
igb_intr_msi(int irq
, void *data
)
6399 struct igb_adapter
*adapter
= data
;
6400 struct igb_q_vector
*q_vector
= adapter
->q_vector
[0];
6401 struct e1000_hw
*hw
= &adapter
->hw
;
6402 /* read ICR disables interrupts using IAM */
6403 u32 icr
= rd32(E1000_ICR
);
6405 igb_write_itr(q_vector
);
6407 if (icr
& E1000_ICR_DRSTA
)
6408 schedule_work(&adapter
->reset_task
);
6410 if (icr
& E1000_ICR_DOUTSYNC
) {
6411 /* HW is reporting DMA is out of sync */
6412 adapter
->stats
.doosync
++;
6415 if (icr
& (E1000_ICR_RXSEQ
| E1000_ICR_LSC
)) {
6416 hw
->mac
.get_link_status
= 1;
6417 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
6418 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
6421 if (icr
& E1000_ICR_TS
)
6422 igb_tsync_interrupt(adapter
);
6424 napi_schedule(&q_vector
->napi
);
6430 * igb_intr - Legacy Interrupt Handler
6431 * @irq: interrupt number
6432 * @data: pointer to a network interface device structure
6434 static irqreturn_t
igb_intr(int irq
, void *data
)
6436 struct igb_adapter
*adapter
= data
;
6437 struct igb_q_vector
*q_vector
= adapter
->q_vector
[0];
6438 struct e1000_hw
*hw
= &adapter
->hw
;
6439 /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
6440 * need for the IMC write
6442 u32 icr
= rd32(E1000_ICR
);
6444 /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
6445 * not set, then the adapter didn't send an interrupt
6447 if (!(icr
& E1000_ICR_INT_ASSERTED
))
6450 igb_write_itr(q_vector
);
6452 if (icr
& E1000_ICR_DRSTA
)
6453 schedule_work(&adapter
->reset_task
);
6455 if (icr
& E1000_ICR_DOUTSYNC
) {
6456 /* HW is reporting DMA is out of sync */
6457 adapter
->stats
.doosync
++;
6460 if (icr
& (E1000_ICR_RXSEQ
| E1000_ICR_LSC
)) {
6461 hw
->mac
.get_link_status
= 1;
6462 /* guard against interrupt when we're going down */
6463 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
6464 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
6467 if (icr
& E1000_ICR_TS
)
6468 igb_tsync_interrupt(adapter
);
6470 napi_schedule(&q_vector
->napi
);
6475 static void igb_ring_irq_enable(struct igb_q_vector
*q_vector
)
6477 struct igb_adapter
*adapter
= q_vector
->adapter
;
6478 struct e1000_hw
*hw
= &adapter
->hw
;
6480 if ((q_vector
->rx
.ring
&& (adapter
->rx_itr_setting
& 3)) ||
6481 (!q_vector
->rx
.ring
&& (adapter
->tx_itr_setting
& 3))) {
6482 if ((adapter
->num_q_vectors
== 1) && !adapter
->vf_data
)
6483 igb_set_itr(q_vector
);
6485 igb_update_ring_itr(q_vector
);
6488 if (!test_bit(__IGB_DOWN
, &adapter
->state
)) {
6489 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
)
6490 wr32(E1000_EIMS
, q_vector
->eims_value
);
6492 igb_irq_enable(adapter
);
6497 * igb_poll - NAPI Rx polling callback
6498 * @napi: napi polling structure
6499 * @budget: count of how many packets we should handle
6501 static int igb_poll(struct napi_struct
*napi
, int budget
)
6503 struct igb_q_vector
*q_vector
= container_of(napi
,
6504 struct igb_q_vector
,
6506 bool clean_complete
= true;
6509 #ifdef CONFIG_IGB_DCA
6510 if (q_vector
->adapter
->flags
& IGB_FLAG_DCA_ENABLED
)
6511 igb_update_dca(q_vector
);
6513 if (q_vector
->tx
.ring
)
6514 clean_complete
= igb_clean_tx_irq(q_vector
);
6516 if (q_vector
->rx
.ring
) {
6517 int cleaned
= igb_clean_rx_irq(q_vector
, budget
);
6519 work_done
+= cleaned
;
6520 clean_complete
&= (cleaned
< budget
);
6523 /* If all work not completed, return budget and keep polling */
6524 if (!clean_complete
)
6527 /* If not enough Rx work done, exit the polling mode */
6528 napi_complete_done(napi
, work_done
);
6529 igb_ring_irq_enable(q_vector
);
6535 * igb_clean_tx_irq - Reclaim resources after transmit completes
6536 * @q_vector: pointer to q_vector containing needed info
6538 * returns true if ring is completely cleaned
6540 static bool igb_clean_tx_irq(struct igb_q_vector
*q_vector
)
6542 struct igb_adapter
*adapter
= q_vector
->adapter
;
6543 struct igb_ring
*tx_ring
= q_vector
->tx
.ring
;
6544 struct igb_tx_buffer
*tx_buffer
;
6545 union e1000_adv_tx_desc
*tx_desc
;
6546 unsigned int total_bytes
= 0, total_packets
= 0;
6547 unsigned int budget
= q_vector
->tx
.work_limit
;
6548 unsigned int i
= tx_ring
->next_to_clean
;
6550 if (test_bit(__IGB_DOWN
, &adapter
->state
))
6553 tx_buffer
= &tx_ring
->tx_buffer_info
[i
];
6554 tx_desc
= IGB_TX_DESC(tx_ring
, i
);
6555 i
-= tx_ring
->count
;
6558 union e1000_adv_tx_desc
*eop_desc
= tx_buffer
->next_to_watch
;
6560 /* if next_to_watch is not set then there is no work pending */
6564 /* prevent any other reads prior to eop_desc */
6565 read_barrier_depends();
6567 /* if DD is not set pending work has not been completed */
6568 if (!(eop_desc
->wb
.status
& cpu_to_le32(E1000_TXD_STAT_DD
)))
6571 /* clear next_to_watch to prevent false hangs */
6572 tx_buffer
->next_to_watch
= NULL
;
6574 /* update the statistics for this packet */
6575 total_bytes
+= tx_buffer
->bytecount
;
6576 total_packets
+= tx_buffer
->gso_segs
;
6579 dev_consume_skb_any(tx_buffer
->skb
);
6581 /* unmap skb header data */
6582 dma_unmap_single(tx_ring
->dev
,
6583 dma_unmap_addr(tx_buffer
, dma
),
6584 dma_unmap_len(tx_buffer
, len
),
6587 /* clear tx_buffer data */
6588 tx_buffer
->skb
= NULL
;
6589 dma_unmap_len_set(tx_buffer
, len
, 0);
6591 /* clear last DMA location and unmap remaining buffers */
6592 while (tx_desc
!= eop_desc
) {
6597 i
-= tx_ring
->count
;
6598 tx_buffer
= tx_ring
->tx_buffer_info
;
6599 tx_desc
= IGB_TX_DESC(tx_ring
, 0);
6602 /* unmap any remaining paged data */
6603 if (dma_unmap_len(tx_buffer
, len
)) {
6604 dma_unmap_page(tx_ring
->dev
,
6605 dma_unmap_addr(tx_buffer
, dma
),
6606 dma_unmap_len(tx_buffer
, len
),
6608 dma_unmap_len_set(tx_buffer
, len
, 0);
6612 /* move us one more past the eop_desc for start of next pkt */
6617 i
-= tx_ring
->count
;
6618 tx_buffer
= tx_ring
->tx_buffer_info
;
6619 tx_desc
= IGB_TX_DESC(tx_ring
, 0);
6622 /* issue prefetch for next Tx descriptor */
6625 /* update budget accounting */
6627 } while (likely(budget
));
6629 netdev_tx_completed_queue(txring_txq(tx_ring
),
6630 total_packets
, total_bytes
);
6631 i
+= tx_ring
->count
;
6632 tx_ring
->next_to_clean
= i
;
6633 u64_stats_update_begin(&tx_ring
->tx_syncp
);
6634 tx_ring
->tx_stats
.bytes
+= total_bytes
;
6635 tx_ring
->tx_stats
.packets
+= total_packets
;
6636 u64_stats_update_end(&tx_ring
->tx_syncp
);
6637 q_vector
->tx
.total_bytes
+= total_bytes
;
6638 q_vector
->tx
.total_packets
+= total_packets
;
6640 if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG
, &tx_ring
->flags
)) {
6641 struct e1000_hw
*hw
= &adapter
->hw
;
6643 /* Detect a transmit hang in hardware, this serializes the
6644 * check with the clearing of time_stamp and movement of i
6646 clear_bit(IGB_RING_FLAG_TX_DETECT_HANG
, &tx_ring
->flags
);
6647 if (tx_buffer
->next_to_watch
&&
6648 time_after(jiffies
, tx_buffer
->time_stamp
+
6649 (adapter
->tx_timeout_factor
* HZ
)) &&
6650 !(rd32(E1000_STATUS
) & E1000_STATUS_TXOFF
)) {
6652 /* detected Tx unit hang */
6653 dev_err(tx_ring
->dev
,
6654 "Detected Tx Unit Hang\n"
6658 " next_to_use <%x>\n"
6659 " next_to_clean <%x>\n"
6660 "buffer_info[next_to_clean]\n"
6661 " time_stamp <%lx>\n"
6662 " next_to_watch <%p>\n"
6664 " desc.status <%x>\n",
6665 tx_ring
->queue_index
,
6666 rd32(E1000_TDH(tx_ring
->reg_idx
)),
6667 readl(tx_ring
->tail
),
6668 tx_ring
->next_to_use
,
6669 tx_ring
->next_to_clean
,
6670 tx_buffer
->time_stamp
,
6671 tx_buffer
->next_to_watch
,
6673 tx_buffer
->next_to_watch
->wb
.status
);
6674 netif_stop_subqueue(tx_ring
->netdev
,
6675 tx_ring
->queue_index
);
6677 /* we are about to reset, no point in enabling stuff */
6682 #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
6683 if (unlikely(total_packets
&&
6684 netif_carrier_ok(tx_ring
->netdev
) &&
6685 igb_desc_unused(tx_ring
) >= TX_WAKE_THRESHOLD
)) {
6686 /* Make sure that anybody stopping the queue after this
6687 * sees the new next_to_clean.
6690 if (__netif_subqueue_stopped(tx_ring
->netdev
,
6691 tx_ring
->queue_index
) &&
6692 !(test_bit(__IGB_DOWN
, &adapter
->state
))) {
6693 netif_wake_subqueue(tx_ring
->netdev
,
6694 tx_ring
->queue_index
);
6696 u64_stats_update_begin(&tx_ring
->tx_syncp
);
6697 tx_ring
->tx_stats
.restart_queue
++;
6698 u64_stats_update_end(&tx_ring
->tx_syncp
);
6706 * igb_reuse_rx_page - page flip buffer and store it back on the ring
6707 * @rx_ring: rx descriptor ring to store buffers on
6708 * @old_buff: donor buffer to have page reused
6710 * Synchronizes page for reuse by the adapter
6712 static void igb_reuse_rx_page(struct igb_ring
*rx_ring
,
6713 struct igb_rx_buffer
*old_buff
)
6715 struct igb_rx_buffer
*new_buff
;
6716 u16 nta
= rx_ring
->next_to_alloc
;
6718 new_buff
= &rx_ring
->rx_buffer_info
[nta
];
6720 /* update, and store next to alloc */
6722 rx_ring
->next_to_alloc
= (nta
< rx_ring
->count
) ? nta
: 0;
6724 /* transfer page from old buffer to new buffer */
6725 *new_buff
= *old_buff
;
6727 /* sync the buffer for use by the device */
6728 dma_sync_single_range_for_device(rx_ring
->dev
, old_buff
->dma
,
6729 old_buff
->page_offset
,
6734 static inline bool igb_page_is_reserved(struct page
*page
)
6736 return (page_to_nid(page
) != numa_mem_id()) || page_is_pfmemalloc(page
);
6739 static bool igb_can_reuse_rx_page(struct igb_rx_buffer
*rx_buffer
,
6741 unsigned int truesize
)
6743 /* avoid re-using remote pages */
6744 if (unlikely(igb_page_is_reserved(page
)))
6747 #if (PAGE_SIZE < 8192)
6748 /* if we are only owner of page we can reuse it */
6749 if (unlikely(page_count(page
) != 1))
6752 /* flip page offset to other buffer */
6753 rx_buffer
->page_offset
^= IGB_RX_BUFSZ
;
6755 /* move offset up to the next cache line */
6756 rx_buffer
->page_offset
+= truesize
;
6758 if (rx_buffer
->page_offset
> (PAGE_SIZE
- IGB_RX_BUFSZ
))
6762 /* Even if we own the page, we are not allowed to use atomic_set()
6763 * This would break get_page_unless_zero() users.
6765 atomic_inc(&page
->_count
);
6771 * igb_add_rx_frag - Add contents of Rx buffer to sk_buff
6772 * @rx_ring: rx descriptor ring to transact packets on
6773 * @rx_buffer: buffer containing page to add
6774 * @rx_desc: descriptor containing length of buffer written by hardware
6775 * @skb: sk_buff to place the data into
6777 * This function will add the data contained in rx_buffer->page to the skb.
6778 * This is done either through a direct copy if the data in the buffer is
6779 * less than the skb header size, otherwise it will just attach the page as
6780 * a frag to the skb.
6782 * The function will then update the page offset if necessary and return
6783 * true if the buffer can be reused by the adapter.
6785 static bool igb_add_rx_frag(struct igb_ring
*rx_ring
,
6786 struct igb_rx_buffer
*rx_buffer
,
6787 union e1000_adv_rx_desc
*rx_desc
,
6788 struct sk_buff
*skb
)
6790 struct page
*page
= rx_buffer
->page
;
6791 unsigned char *va
= page_address(page
) + rx_buffer
->page_offset
;
6792 unsigned int size
= le16_to_cpu(rx_desc
->wb
.upper
.length
);
6793 #if (PAGE_SIZE < 8192)
6794 unsigned int truesize
= IGB_RX_BUFSZ
;
6796 unsigned int truesize
= SKB_DATA_ALIGN(size
);
6798 unsigned int pull_len
;
6800 if (unlikely(skb_is_nonlinear(skb
)))
6803 if (unlikely(igb_test_staterr(rx_desc
, E1000_RXDADV_STAT_TSIP
))) {
6804 igb_ptp_rx_pktstamp(rx_ring
->q_vector
, va
, skb
);
6805 va
+= IGB_TS_HDR_LEN
;
6806 size
-= IGB_TS_HDR_LEN
;
6809 if (likely(size
<= IGB_RX_HDR_LEN
)) {
6810 memcpy(__skb_put(skb
, size
), va
, ALIGN(size
, sizeof(long)));
6812 /* page is not reserved, we can reuse buffer as-is */
6813 if (likely(!igb_page_is_reserved(page
)))
6816 /* this page cannot be reused so discard it */
6821 /* we need the header to contain the greater of either ETH_HLEN or
6822 * 60 bytes if the skb->len is less than 60 for skb_pad.
6824 pull_len
= eth_get_headlen(va
, IGB_RX_HDR_LEN
);
6826 /* align pull length to size of long to optimize memcpy performance */
6827 memcpy(__skb_put(skb
, pull_len
), va
, ALIGN(pull_len
, sizeof(long)));
6829 /* update all of the pointers */
6834 skb_add_rx_frag(skb
, skb_shinfo(skb
)->nr_frags
, page
,
6835 (unsigned long)va
& ~PAGE_MASK
, size
, truesize
);
6837 return igb_can_reuse_rx_page(rx_buffer
, page
, truesize
);
6840 static struct sk_buff
*igb_fetch_rx_buffer(struct igb_ring
*rx_ring
,
6841 union e1000_adv_rx_desc
*rx_desc
,
6842 struct sk_buff
*skb
)
6844 struct igb_rx_buffer
*rx_buffer
;
6847 rx_buffer
= &rx_ring
->rx_buffer_info
[rx_ring
->next_to_clean
];
6848 page
= rx_buffer
->page
;
6852 void *page_addr
= page_address(page
) +
6853 rx_buffer
->page_offset
;
6855 /* prefetch first cache line of first page */
6856 prefetch(page_addr
);
6857 #if L1_CACHE_BYTES < 128
6858 prefetch(page_addr
+ L1_CACHE_BYTES
);
6861 /* allocate a skb to store the frags */
6862 skb
= napi_alloc_skb(&rx_ring
->q_vector
->napi
, IGB_RX_HDR_LEN
);
6863 if (unlikely(!skb
)) {
6864 rx_ring
->rx_stats
.alloc_failed
++;
6868 /* we will be copying header into skb->data in
6869 * pskb_may_pull so it is in our interest to prefetch
6870 * it now to avoid a possible cache miss
6872 prefetchw(skb
->data
);
6875 /* we are reusing so sync this buffer for CPU use */
6876 dma_sync_single_range_for_cpu(rx_ring
->dev
,
6878 rx_buffer
->page_offset
,
6882 /* pull page into skb */
6883 if (igb_add_rx_frag(rx_ring
, rx_buffer
, rx_desc
, skb
)) {
6884 /* hand second half of page back to the ring */
6885 igb_reuse_rx_page(rx_ring
, rx_buffer
);
6887 /* we are not reusing the buffer so unmap it */
6888 dma_unmap_page(rx_ring
->dev
, rx_buffer
->dma
,
6889 PAGE_SIZE
, DMA_FROM_DEVICE
);
6892 /* clear contents of rx_buffer */
6893 rx_buffer
->page
= NULL
;
6898 static inline void igb_rx_checksum(struct igb_ring
*ring
,
6899 union e1000_adv_rx_desc
*rx_desc
,
6900 struct sk_buff
*skb
)
6902 skb_checksum_none_assert(skb
);
6904 /* Ignore Checksum bit is set */
6905 if (igb_test_staterr(rx_desc
, E1000_RXD_STAT_IXSM
))
6908 /* Rx checksum disabled via ethtool */
6909 if (!(ring
->netdev
->features
& NETIF_F_RXCSUM
))
6912 /* TCP/UDP checksum error bit is set */
6913 if (igb_test_staterr(rx_desc
,
6914 E1000_RXDEXT_STATERR_TCPE
|
6915 E1000_RXDEXT_STATERR_IPE
)) {
6916 /* work around errata with sctp packets where the TCPE aka
6917 * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
6918 * packets, (aka let the stack check the crc32c)
6920 if (!((skb
->len
== 60) &&
6921 test_bit(IGB_RING_FLAG_RX_SCTP_CSUM
, &ring
->flags
))) {
6922 u64_stats_update_begin(&ring
->rx_syncp
);
6923 ring
->rx_stats
.csum_err
++;
6924 u64_stats_update_end(&ring
->rx_syncp
);
6926 /* let the stack verify checksum errors */
6929 /* It must be a TCP or UDP packet with a valid checksum */
6930 if (igb_test_staterr(rx_desc
, E1000_RXD_STAT_TCPCS
|
6931 E1000_RXD_STAT_UDPCS
))
6932 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
6934 dev_dbg(ring
->dev
, "cksum success: bits %08X\n",
6935 le32_to_cpu(rx_desc
->wb
.upper
.status_error
));
6938 static inline void igb_rx_hash(struct igb_ring
*ring
,
6939 union e1000_adv_rx_desc
*rx_desc
,
6940 struct sk_buff
*skb
)
6942 if (ring
->netdev
->features
& NETIF_F_RXHASH
)
6944 le32_to_cpu(rx_desc
->wb
.lower
.hi_dword
.rss
),
6949 * igb_is_non_eop - process handling of non-EOP buffers
6950 * @rx_ring: Rx ring being processed
6951 * @rx_desc: Rx descriptor for current buffer
6952 * @skb: current socket buffer containing buffer in progress
6954 * This function updates next to clean. If the buffer is an EOP buffer
6955 * this function exits returning false, otherwise it will place the
6956 * sk_buff in the next buffer to be chained and return true indicating
6957 * that this is in fact a non-EOP buffer.
6959 static bool igb_is_non_eop(struct igb_ring
*rx_ring
,
6960 union e1000_adv_rx_desc
*rx_desc
)
6962 u32 ntc
= rx_ring
->next_to_clean
+ 1;
6964 /* fetch, update, and store next to clean */
6965 ntc
= (ntc
< rx_ring
->count
) ? ntc
: 0;
6966 rx_ring
->next_to_clean
= ntc
;
6968 prefetch(IGB_RX_DESC(rx_ring
, ntc
));
6970 if (likely(igb_test_staterr(rx_desc
, E1000_RXD_STAT_EOP
)))
6977 * igb_cleanup_headers - Correct corrupted or empty headers
6978 * @rx_ring: rx descriptor ring packet is being transacted on
6979 * @rx_desc: pointer to the EOP Rx descriptor
6980 * @skb: pointer to current skb being fixed
6982 * Address the case where we are pulling data in on pages only
6983 * and as such no data is present in the skb header.
6985 * In addition if skb is not at least 60 bytes we need to pad it so that
6986 * it is large enough to qualify as a valid Ethernet frame.
6988 * Returns true if an error was encountered and skb was freed.
6990 static bool igb_cleanup_headers(struct igb_ring
*rx_ring
,
6991 union e1000_adv_rx_desc
*rx_desc
,
6992 struct sk_buff
*skb
)
6994 if (unlikely((igb_test_staterr(rx_desc
,
6995 E1000_RXDEXT_ERR_FRAME_ERR_MASK
)))) {
6996 struct net_device
*netdev
= rx_ring
->netdev
;
6997 if (!(netdev
->features
& NETIF_F_RXALL
)) {
6998 dev_kfree_skb_any(skb
);
7003 /* if eth_skb_pad returns an error the skb was freed */
7004 if (eth_skb_pad(skb
))
7011 * igb_process_skb_fields - Populate skb header fields from Rx descriptor
7012 * @rx_ring: rx descriptor ring packet is being transacted on
7013 * @rx_desc: pointer to the EOP Rx descriptor
7014 * @skb: pointer to current skb being populated
7016 * This function checks the ring, descriptor, and packet information in
7017 * order to populate the hash, checksum, VLAN, timestamp, protocol, and
7018 * other fields within the skb.
7020 static void igb_process_skb_fields(struct igb_ring
*rx_ring
,
7021 union e1000_adv_rx_desc
*rx_desc
,
7022 struct sk_buff
*skb
)
7024 struct net_device
*dev
= rx_ring
->netdev
;
7026 igb_rx_hash(rx_ring
, rx_desc
, skb
);
7028 igb_rx_checksum(rx_ring
, rx_desc
, skb
);
7030 if (igb_test_staterr(rx_desc
, E1000_RXDADV_STAT_TS
) &&
7031 !igb_test_staterr(rx_desc
, E1000_RXDADV_STAT_TSIP
))
7032 igb_ptp_rx_rgtstamp(rx_ring
->q_vector
, skb
);
7034 if ((dev
->features
& NETIF_F_HW_VLAN_CTAG_RX
) &&
7035 igb_test_staterr(rx_desc
, E1000_RXD_STAT_VP
)) {
7038 if (igb_test_staterr(rx_desc
, E1000_RXDEXT_STATERR_LB
) &&
7039 test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP
, &rx_ring
->flags
))
7040 vid
= be16_to_cpu(rx_desc
->wb
.upper
.vlan
);
7042 vid
= le16_to_cpu(rx_desc
->wb
.upper
.vlan
);
7044 __vlan_hwaccel_put_tag(skb
, htons(ETH_P_8021Q
), vid
);
7047 skb_record_rx_queue(skb
, rx_ring
->queue_index
);
7049 skb
->protocol
= eth_type_trans(skb
, rx_ring
->netdev
);
7052 static int igb_clean_rx_irq(struct igb_q_vector
*q_vector
, const int budget
)
7054 struct igb_ring
*rx_ring
= q_vector
->rx
.ring
;
7055 struct sk_buff
*skb
= rx_ring
->skb
;
7056 unsigned int total_bytes
= 0, total_packets
= 0;
7057 u16 cleaned_count
= igb_desc_unused(rx_ring
);
7059 while (likely(total_packets
< budget
)) {
7060 union e1000_adv_rx_desc
*rx_desc
;
7062 /* return some buffers to hardware, one at a time is too slow */
7063 if (cleaned_count
>= IGB_RX_BUFFER_WRITE
) {
7064 igb_alloc_rx_buffers(rx_ring
, cleaned_count
);
7068 rx_desc
= IGB_RX_DESC(rx_ring
, rx_ring
->next_to_clean
);
7070 if (!rx_desc
->wb
.upper
.status_error
)
7073 /* This memory barrier is needed to keep us from reading
7074 * any other fields out of the rx_desc until we know the
7075 * descriptor has been written back
7079 /* retrieve a buffer from the ring */
7080 skb
= igb_fetch_rx_buffer(rx_ring
, rx_desc
, skb
);
7082 /* exit if we failed to retrieve a buffer */
7088 /* fetch next buffer in frame if non-eop */
7089 if (igb_is_non_eop(rx_ring
, rx_desc
))
7092 /* verify the packet layout is correct */
7093 if (igb_cleanup_headers(rx_ring
, rx_desc
, skb
)) {
7098 /* probably a little skewed due to removing CRC */
7099 total_bytes
+= skb
->len
;
7101 /* populate checksum, timestamp, VLAN, and protocol */
7102 igb_process_skb_fields(rx_ring
, rx_desc
, skb
);
7104 napi_gro_receive(&q_vector
->napi
, skb
);
7106 /* reset skb pointer */
7109 /* update budget accounting */
7113 /* place incomplete frames back on ring for completion */
7116 u64_stats_update_begin(&rx_ring
->rx_syncp
);
7117 rx_ring
->rx_stats
.packets
+= total_packets
;
7118 rx_ring
->rx_stats
.bytes
+= total_bytes
;
7119 u64_stats_update_end(&rx_ring
->rx_syncp
);
7120 q_vector
->rx
.total_packets
+= total_packets
;
7121 q_vector
->rx
.total_bytes
+= total_bytes
;
7124 igb_alloc_rx_buffers(rx_ring
, cleaned_count
);
7126 return total_packets
;
7129 static bool igb_alloc_mapped_page(struct igb_ring
*rx_ring
,
7130 struct igb_rx_buffer
*bi
)
7132 struct page
*page
= bi
->page
;
7135 /* since we are recycling buffers we should seldom need to alloc */
7139 /* alloc new page for storage */
7140 page
= dev_alloc_page();
7141 if (unlikely(!page
)) {
7142 rx_ring
->rx_stats
.alloc_failed
++;
7146 /* map page for use */
7147 dma
= dma_map_page(rx_ring
->dev
, page
, 0, PAGE_SIZE
, DMA_FROM_DEVICE
);
7149 /* if mapping failed free memory back to system since
7150 * there isn't much point in holding memory we can't use
7152 if (dma_mapping_error(rx_ring
->dev
, dma
)) {
7155 rx_ring
->rx_stats
.alloc_failed
++;
7161 bi
->page_offset
= 0;
7167 * igb_alloc_rx_buffers - Replace used receive buffers; packet split
7168 * @adapter: address of board private structure
7170 void igb_alloc_rx_buffers(struct igb_ring
*rx_ring
, u16 cleaned_count
)
7172 union e1000_adv_rx_desc
*rx_desc
;
7173 struct igb_rx_buffer
*bi
;
7174 u16 i
= rx_ring
->next_to_use
;
7180 rx_desc
= IGB_RX_DESC(rx_ring
, i
);
7181 bi
= &rx_ring
->rx_buffer_info
[i
];
7182 i
-= rx_ring
->count
;
7185 if (!igb_alloc_mapped_page(rx_ring
, bi
))
7188 /* Refresh the desc even if buffer_addrs didn't change
7189 * because each write-back erases this info.
7191 rx_desc
->read
.pkt_addr
= cpu_to_le64(bi
->dma
+ bi
->page_offset
);
7197 rx_desc
= IGB_RX_DESC(rx_ring
, 0);
7198 bi
= rx_ring
->rx_buffer_info
;
7199 i
-= rx_ring
->count
;
7202 /* clear the status bits for the next_to_use descriptor */
7203 rx_desc
->wb
.upper
.status_error
= 0;
7206 } while (cleaned_count
);
7208 i
+= rx_ring
->count
;
7210 if (rx_ring
->next_to_use
!= i
) {
7211 /* record the next descriptor to use */
7212 rx_ring
->next_to_use
= i
;
7214 /* update next to alloc since we have filled the ring */
7215 rx_ring
->next_to_alloc
= i
;
7217 /* Force memory writes to complete before letting h/w
7218 * know there are new descriptors to fetch. (Only
7219 * applicable for weak-ordered memory model archs,
7223 writel(i
, rx_ring
->tail
);
7233 static int igb_mii_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
7235 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7236 struct mii_ioctl_data
*data
= if_mii(ifr
);
7238 if (adapter
->hw
.phy
.media_type
!= e1000_media_type_copper
)
7243 data
->phy_id
= adapter
->hw
.phy
.addr
;
7246 if (igb_read_phy_reg(&adapter
->hw
, data
->reg_num
& 0x1F,
7263 static int igb_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
7269 return igb_mii_ioctl(netdev
, ifr
, cmd
);
7271 return igb_ptp_get_ts_config(netdev
, ifr
);
7273 return igb_ptp_set_ts_config(netdev
, ifr
);
7279 void igb_read_pci_cfg(struct e1000_hw
*hw
, u32 reg
, u16
*value
)
7281 struct igb_adapter
*adapter
= hw
->back
;
7283 pci_read_config_word(adapter
->pdev
, reg
, value
);
7286 void igb_write_pci_cfg(struct e1000_hw
*hw
, u32 reg
, u16
*value
)
7288 struct igb_adapter
*adapter
= hw
->back
;
7290 pci_write_config_word(adapter
->pdev
, reg
, *value
);
7293 s32
igb_read_pcie_cap_reg(struct e1000_hw
*hw
, u32 reg
, u16
*value
)
7295 struct igb_adapter
*adapter
= hw
->back
;
7297 if (pcie_capability_read_word(adapter
->pdev
, reg
, value
))
7298 return -E1000_ERR_CONFIG
;
7303 s32
igb_write_pcie_cap_reg(struct e1000_hw
*hw
, u32 reg
, u16
*value
)
7305 struct igb_adapter
*adapter
= hw
->back
;
7307 if (pcie_capability_write_word(adapter
->pdev
, reg
, *value
))
7308 return -E1000_ERR_CONFIG
;
7313 static void igb_vlan_mode(struct net_device
*netdev
, netdev_features_t features
)
7315 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7316 struct e1000_hw
*hw
= &adapter
->hw
;
7318 bool enable
= !!(features
& NETIF_F_HW_VLAN_CTAG_RX
);
7321 /* enable VLAN tag insert/strip */
7322 ctrl
= rd32(E1000_CTRL
);
7323 ctrl
|= E1000_CTRL_VME
;
7324 wr32(E1000_CTRL
, ctrl
);
7326 /* Disable CFI check */
7327 rctl
= rd32(E1000_RCTL
);
7328 rctl
&= ~E1000_RCTL_CFIEN
;
7329 wr32(E1000_RCTL
, rctl
);
7331 /* disable VLAN tag insert/strip */
7332 ctrl
= rd32(E1000_CTRL
);
7333 ctrl
&= ~E1000_CTRL_VME
;
7334 wr32(E1000_CTRL
, ctrl
);
7338 static int igb_vlan_rx_add_vid(struct net_device
*netdev
,
7339 __be16 proto
, u16 vid
)
7341 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7342 struct e1000_hw
*hw
= &adapter
->hw
;
7343 int pf_id
= adapter
->vfs_allocated_count
;
7345 /* add the filter since PF can receive vlans w/o entry in vlvf */
7346 if (!vid
|| !(adapter
->flags
& IGB_FLAG_VLAN_PROMISC
))
7347 igb_vfta_set(hw
, vid
, pf_id
, true, !!vid
);
7349 set_bit(vid
, adapter
->active_vlans
);
7354 static int igb_vlan_rx_kill_vid(struct net_device
*netdev
,
7355 __be16 proto
, u16 vid
)
7357 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7358 int pf_id
= adapter
->vfs_allocated_count
;
7359 struct e1000_hw
*hw
= &adapter
->hw
;
7361 /* remove VID from filter table */
7362 if (vid
&& !(adapter
->flags
& IGB_FLAG_VLAN_PROMISC
))
7363 igb_vfta_set(hw
, vid
, pf_id
, false, true);
7365 clear_bit(vid
, adapter
->active_vlans
);
7370 static void igb_restore_vlan(struct igb_adapter
*adapter
)
7374 igb_vlan_mode(adapter
->netdev
, adapter
->netdev
->features
);
7375 igb_vlan_rx_add_vid(adapter
->netdev
, htons(ETH_P_8021Q
), 0);
7377 for_each_set_bit_from(vid
, adapter
->active_vlans
, VLAN_N_VID
)
7378 igb_vlan_rx_add_vid(adapter
->netdev
, htons(ETH_P_8021Q
), vid
);
7381 int igb_set_spd_dplx(struct igb_adapter
*adapter
, u32 spd
, u8 dplx
)
7383 struct pci_dev
*pdev
= adapter
->pdev
;
7384 struct e1000_mac_info
*mac
= &adapter
->hw
.mac
;
7388 /* Make sure dplx is at most 1 bit and lsb of speed is not set
7389 * for the switch() below to work
7391 if ((spd
& 1) || (dplx
& ~1))
7394 /* Fiber NIC's only allow 1000 gbps Full duplex
7395 * and 100Mbps Full duplex for 100baseFx sfp
7397 if (adapter
->hw
.phy
.media_type
== e1000_media_type_internal_serdes
) {
7398 switch (spd
+ dplx
) {
7399 case SPEED_10
+ DUPLEX_HALF
:
7400 case SPEED_10
+ DUPLEX_FULL
:
7401 case SPEED_100
+ DUPLEX_HALF
:
7408 switch (spd
+ dplx
) {
7409 case SPEED_10
+ DUPLEX_HALF
:
7410 mac
->forced_speed_duplex
= ADVERTISE_10_HALF
;
7412 case SPEED_10
+ DUPLEX_FULL
:
7413 mac
->forced_speed_duplex
= ADVERTISE_10_FULL
;
7415 case SPEED_100
+ DUPLEX_HALF
:
7416 mac
->forced_speed_duplex
= ADVERTISE_100_HALF
;
7418 case SPEED_100
+ DUPLEX_FULL
:
7419 mac
->forced_speed_duplex
= ADVERTISE_100_FULL
;
7421 case SPEED_1000
+ DUPLEX_FULL
:
7423 adapter
->hw
.phy
.autoneg_advertised
= ADVERTISE_1000_FULL
;
7425 case SPEED_1000
+ DUPLEX_HALF
: /* not supported */
7430 /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
7431 adapter
->hw
.phy
.mdix
= AUTO_ALL_MODES
;
7436 dev_err(&pdev
->dev
, "Unsupported Speed/Duplex configuration\n");
7440 static int __igb_shutdown(struct pci_dev
*pdev
, bool *enable_wake
,
7443 struct net_device
*netdev
= pci_get_drvdata(pdev
);
7444 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7445 struct e1000_hw
*hw
= &adapter
->hw
;
7446 u32 ctrl
, rctl
, status
;
7447 u32 wufc
= runtime
? E1000_WUFC_LNKC
: adapter
->wol
;
7452 netif_device_detach(netdev
);
7454 if (netif_running(netdev
))
7455 __igb_close(netdev
, true);
7457 igb_clear_interrupt_scheme(adapter
);
7460 retval
= pci_save_state(pdev
);
7465 status
= rd32(E1000_STATUS
);
7466 if (status
& E1000_STATUS_LU
)
7467 wufc
&= ~E1000_WUFC_LNKC
;
7470 igb_setup_rctl(adapter
);
7471 igb_set_rx_mode(netdev
);
7473 /* turn on all-multi mode if wake on multicast is enabled */
7474 if (wufc
& E1000_WUFC_MC
) {
7475 rctl
= rd32(E1000_RCTL
);
7476 rctl
|= E1000_RCTL_MPE
;
7477 wr32(E1000_RCTL
, rctl
);
7480 ctrl
= rd32(E1000_CTRL
);
7481 /* advertise wake from D3Cold */
7482 #define E1000_CTRL_ADVD3WUC 0x00100000
7483 /* phy power management enable */
7484 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
7485 ctrl
|= E1000_CTRL_ADVD3WUC
;
7486 wr32(E1000_CTRL
, ctrl
);
7488 /* Allow time for pending master requests to run */
7489 igb_disable_pcie_master(hw
);
7491 wr32(E1000_WUC
, E1000_WUC_PME_EN
);
7492 wr32(E1000_WUFC
, wufc
);
7495 wr32(E1000_WUFC
, 0);
7498 *enable_wake
= wufc
|| adapter
->en_mng_pt
;
7500 igb_power_down_link(adapter
);
7502 igb_power_up_link(adapter
);
7504 /* Release control of h/w to f/w. If f/w is AMT enabled, this
7505 * would have already happened in close and is redundant.
7507 igb_release_hw_control(adapter
);
7509 pci_disable_device(pdev
);
7515 #ifdef CONFIG_PM_SLEEP
7516 static int igb_suspend(struct device
*dev
)
7520 struct pci_dev
*pdev
= to_pci_dev(dev
);
7522 retval
= __igb_shutdown(pdev
, &wake
, 0);
7527 pci_prepare_to_sleep(pdev
);
7529 pci_wake_from_d3(pdev
, false);
7530 pci_set_power_state(pdev
, PCI_D3hot
);
7535 #endif /* CONFIG_PM_SLEEP */
7537 static int igb_resume(struct device
*dev
)
7539 struct pci_dev
*pdev
= to_pci_dev(dev
);
7540 struct net_device
*netdev
= pci_get_drvdata(pdev
);
7541 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7542 struct e1000_hw
*hw
= &adapter
->hw
;
7545 pci_set_power_state(pdev
, PCI_D0
);
7546 pci_restore_state(pdev
);
7547 pci_save_state(pdev
);
7549 if (!pci_device_is_present(pdev
))
7551 err
= pci_enable_device_mem(pdev
);
7554 "igb: Cannot enable PCI device from suspend\n");
7557 pci_set_master(pdev
);
7559 pci_enable_wake(pdev
, PCI_D3hot
, 0);
7560 pci_enable_wake(pdev
, PCI_D3cold
, 0);
7562 if (igb_init_interrupt_scheme(adapter
, true)) {
7563 dev_err(&pdev
->dev
, "Unable to allocate memory for queues\n");
7570 /* let the f/w know that the h/w is now under the control of the
7573 igb_get_hw_control(adapter
);
7575 wr32(E1000_WUS
, ~0);
7577 if (netdev
->flags
& IFF_UP
) {
7579 err
= __igb_open(netdev
, true);
7585 netif_device_attach(netdev
);
7589 static int igb_runtime_idle(struct device
*dev
)
7591 struct pci_dev
*pdev
= to_pci_dev(dev
);
7592 struct net_device
*netdev
= pci_get_drvdata(pdev
);
7593 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7595 if (!igb_has_link(adapter
))
7596 pm_schedule_suspend(dev
, MSEC_PER_SEC
* 5);
7601 static int igb_runtime_suspend(struct device
*dev
)
7603 struct pci_dev
*pdev
= to_pci_dev(dev
);
7607 retval
= __igb_shutdown(pdev
, &wake
, 1);
7612 pci_prepare_to_sleep(pdev
);
7614 pci_wake_from_d3(pdev
, false);
7615 pci_set_power_state(pdev
, PCI_D3hot
);
7621 static int igb_runtime_resume(struct device
*dev
)
7623 return igb_resume(dev
);
7625 #endif /* CONFIG_PM */
7627 static void igb_shutdown(struct pci_dev
*pdev
)
7631 __igb_shutdown(pdev
, &wake
, 0);
7633 if (system_state
== SYSTEM_POWER_OFF
) {
7634 pci_wake_from_d3(pdev
, wake
);
7635 pci_set_power_state(pdev
, PCI_D3hot
);
7639 #ifdef CONFIG_PCI_IOV
7640 static int igb_sriov_reinit(struct pci_dev
*dev
)
7642 struct net_device
*netdev
= pci_get_drvdata(dev
);
7643 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7644 struct pci_dev
*pdev
= adapter
->pdev
;
7648 if (netif_running(netdev
))
7653 igb_clear_interrupt_scheme(adapter
);
7655 igb_init_queue_configuration(adapter
);
7657 if (igb_init_interrupt_scheme(adapter
, true)) {
7659 dev_err(&pdev
->dev
, "Unable to allocate memory for queues\n");
7663 if (netif_running(netdev
))
7671 static int igb_pci_disable_sriov(struct pci_dev
*dev
)
7673 int err
= igb_disable_sriov(dev
);
7676 err
= igb_sriov_reinit(dev
);
7681 static int igb_pci_enable_sriov(struct pci_dev
*dev
, int num_vfs
)
7683 int err
= igb_enable_sriov(dev
, num_vfs
);
7688 err
= igb_sriov_reinit(dev
);
7697 static int igb_pci_sriov_configure(struct pci_dev
*dev
, int num_vfs
)
7699 #ifdef CONFIG_PCI_IOV
7701 return igb_pci_disable_sriov(dev
);
7703 return igb_pci_enable_sriov(dev
, num_vfs
);
7708 #ifdef CONFIG_NET_POLL_CONTROLLER
7709 /* Polling 'interrupt' - used by things like netconsole to send skbs
7710 * without having to re-enable interrupts. It's not called while
7711 * the interrupt routine is executing.
7713 static void igb_netpoll(struct net_device
*netdev
)
7715 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7716 struct e1000_hw
*hw
= &adapter
->hw
;
7717 struct igb_q_vector
*q_vector
;
7720 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
7721 q_vector
= adapter
->q_vector
[i
];
7722 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
)
7723 wr32(E1000_EIMC
, q_vector
->eims_value
);
7725 igb_irq_disable(adapter
);
7726 napi_schedule(&q_vector
->napi
);
7729 #endif /* CONFIG_NET_POLL_CONTROLLER */
7732 * igb_io_error_detected - called when PCI error is detected
7733 * @pdev: Pointer to PCI device
7734 * @state: The current pci connection state
7736 * This function is called after a PCI bus error affecting
7737 * this device has been detected.
7739 static pci_ers_result_t
igb_io_error_detected(struct pci_dev
*pdev
,
7740 pci_channel_state_t state
)
7742 struct net_device
*netdev
= pci_get_drvdata(pdev
);
7743 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7745 netif_device_detach(netdev
);
7747 if (state
== pci_channel_io_perm_failure
)
7748 return PCI_ERS_RESULT_DISCONNECT
;
7750 if (netif_running(netdev
))
7752 pci_disable_device(pdev
);
7754 /* Request a slot slot reset. */
7755 return PCI_ERS_RESULT_NEED_RESET
;
7759 * igb_io_slot_reset - called after the pci bus has been reset.
7760 * @pdev: Pointer to PCI device
7762 * Restart the card from scratch, as if from a cold-boot. Implementation
7763 * resembles the first-half of the igb_resume routine.
7765 static pci_ers_result_t
igb_io_slot_reset(struct pci_dev
*pdev
)
7767 struct net_device
*netdev
= pci_get_drvdata(pdev
);
7768 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7769 struct e1000_hw
*hw
= &adapter
->hw
;
7770 pci_ers_result_t result
;
7773 if (pci_enable_device_mem(pdev
)) {
7775 "Cannot re-enable PCI device after reset.\n");
7776 result
= PCI_ERS_RESULT_DISCONNECT
;
7778 pci_set_master(pdev
);
7779 pci_restore_state(pdev
);
7780 pci_save_state(pdev
);
7782 pci_enable_wake(pdev
, PCI_D3hot
, 0);
7783 pci_enable_wake(pdev
, PCI_D3cold
, 0);
7786 wr32(E1000_WUS
, ~0);
7787 result
= PCI_ERS_RESULT_RECOVERED
;
7790 err
= pci_cleanup_aer_uncorrect_error_status(pdev
);
7793 "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n",
7795 /* non-fatal, continue */
7802 * igb_io_resume - called when traffic can start flowing again.
7803 * @pdev: Pointer to PCI device
7805 * This callback is called when the error recovery driver tells us that
7806 * its OK to resume normal operation. Implementation resembles the
7807 * second-half of the igb_resume routine.
7809 static void igb_io_resume(struct pci_dev
*pdev
)
7811 struct net_device
*netdev
= pci_get_drvdata(pdev
);
7812 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7814 if (netif_running(netdev
)) {
7815 if (igb_up(adapter
)) {
7816 dev_err(&pdev
->dev
, "igb_up failed after reset\n");
7821 netif_device_attach(netdev
);
7823 /* let the f/w know that the h/w is now under the control of the
7826 igb_get_hw_control(adapter
);
7829 static void igb_rar_set_qsel(struct igb_adapter
*adapter
, u8
*addr
, u32 index
,
7832 struct e1000_hw
*hw
= &adapter
->hw
;
7833 u32 rar_low
, rar_high
;
7835 /* HW expects these in little endian so we reverse the byte order
7836 * from network order (big endian) to CPU endian
7838 rar_low
= le32_to_cpup((__be32
*)(addr
));
7839 rar_high
= le16_to_cpup((__be16
*)(addr
+ 4));
7841 /* Indicate to hardware the Address is Valid. */
7842 rar_high
|= E1000_RAH_AV
;
7844 if (hw
->mac
.type
== e1000_82575
)
7845 rar_high
|= E1000_RAH_POOL_1
* qsel
;
7847 rar_high
|= E1000_RAH_POOL_1
<< qsel
;
7849 wr32(E1000_RAL(index
), rar_low
);
7851 wr32(E1000_RAH(index
), rar_high
);
7855 static int igb_set_vf_mac(struct igb_adapter
*adapter
,
7856 int vf
, unsigned char *mac_addr
)
7858 struct e1000_hw
*hw
= &adapter
->hw
;
7859 /* VF MAC addresses start at end of receive addresses and moves
7860 * towards the first, as a result a collision should not be possible
7862 int rar_entry
= hw
->mac
.rar_entry_count
- (vf
+ 1);
7864 memcpy(adapter
->vf_data
[vf
].vf_mac_addresses
, mac_addr
, ETH_ALEN
);
7866 igb_rar_set_qsel(adapter
, mac_addr
, rar_entry
, vf
);
7871 static int igb_ndo_set_vf_mac(struct net_device
*netdev
, int vf
, u8
*mac
)
7873 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7874 if (!is_valid_ether_addr(mac
) || (vf
>= adapter
->vfs_allocated_count
))
7876 adapter
->vf_data
[vf
].flags
|= IGB_VF_FLAG_PF_SET_MAC
;
7877 dev_info(&adapter
->pdev
->dev
, "setting MAC %pM on VF %d\n", mac
, vf
);
7878 dev_info(&adapter
->pdev
->dev
,
7879 "Reload the VF driver to make this change effective.");
7880 if (test_bit(__IGB_DOWN
, &adapter
->state
)) {
7881 dev_warn(&adapter
->pdev
->dev
,
7882 "The VF MAC address has been set, but the PF device is not up.\n");
7883 dev_warn(&adapter
->pdev
->dev
,
7884 "Bring the PF device up before attempting to use the VF device.\n");
7886 return igb_set_vf_mac(adapter
, vf
, mac
);
7889 static int igb_link_mbps(int internal_link_speed
)
7891 switch (internal_link_speed
) {
7901 static void igb_set_vf_rate_limit(struct e1000_hw
*hw
, int vf
, int tx_rate
,
7908 /* Calculate the rate factor values to set */
7909 rf_int
= link_speed
/ tx_rate
;
7910 rf_dec
= (link_speed
- (rf_int
* tx_rate
));
7911 rf_dec
= (rf_dec
* (1 << E1000_RTTBCNRC_RF_INT_SHIFT
)) /
7914 bcnrc_val
= E1000_RTTBCNRC_RS_ENA
;
7915 bcnrc_val
|= ((rf_int
<< E1000_RTTBCNRC_RF_INT_SHIFT
) &
7916 E1000_RTTBCNRC_RF_INT_MASK
);
7917 bcnrc_val
|= (rf_dec
& E1000_RTTBCNRC_RF_DEC_MASK
);
7922 wr32(E1000_RTTDQSEL
, vf
); /* vf X uses queue X */
7923 /* Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
7924 * register. MMW_SIZE=0x014 if 9728-byte jumbo is supported.
7926 wr32(E1000_RTTBCNRM
, 0x14);
7927 wr32(E1000_RTTBCNRC
, bcnrc_val
);
7930 static void igb_check_vf_rate_limit(struct igb_adapter
*adapter
)
7932 int actual_link_speed
, i
;
7933 bool reset_rate
= false;
7935 /* VF TX rate limit was not set or not supported */
7936 if ((adapter
->vf_rate_link_speed
== 0) ||
7937 (adapter
->hw
.mac
.type
!= e1000_82576
))
7940 actual_link_speed
= igb_link_mbps(adapter
->link_speed
);
7941 if (actual_link_speed
!= adapter
->vf_rate_link_speed
) {
7943 adapter
->vf_rate_link_speed
= 0;
7944 dev_info(&adapter
->pdev
->dev
,
7945 "Link speed has been changed. VF Transmit rate is disabled\n");
7948 for (i
= 0; i
< adapter
->vfs_allocated_count
; i
++) {
7950 adapter
->vf_data
[i
].tx_rate
= 0;
7952 igb_set_vf_rate_limit(&adapter
->hw
, i
,
7953 adapter
->vf_data
[i
].tx_rate
,
7958 static int igb_ndo_set_vf_bw(struct net_device
*netdev
, int vf
,
7959 int min_tx_rate
, int max_tx_rate
)
7961 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7962 struct e1000_hw
*hw
= &adapter
->hw
;
7963 int actual_link_speed
;
7965 if (hw
->mac
.type
!= e1000_82576
)
7971 actual_link_speed
= igb_link_mbps(adapter
->link_speed
);
7972 if ((vf
>= adapter
->vfs_allocated_count
) ||
7973 (!(rd32(E1000_STATUS
) & E1000_STATUS_LU
)) ||
7974 (max_tx_rate
< 0) ||
7975 (max_tx_rate
> actual_link_speed
))
7978 adapter
->vf_rate_link_speed
= actual_link_speed
;
7979 adapter
->vf_data
[vf
].tx_rate
= (u16
)max_tx_rate
;
7980 igb_set_vf_rate_limit(hw
, vf
, max_tx_rate
, actual_link_speed
);
7985 static int igb_ndo_set_vf_spoofchk(struct net_device
*netdev
, int vf
,
7988 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7989 struct e1000_hw
*hw
= &adapter
->hw
;
7990 u32 reg_val
, reg_offset
;
7992 if (!adapter
->vfs_allocated_count
)
7995 if (vf
>= adapter
->vfs_allocated_count
)
7998 reg_offset
= (hw
->mac
.type
== e1000_82576
) ? E1000_DTXSWC
: E1000_TXSWC
;
7999 reg_val
= rd32(reg_offset
);
8001 reg_val
|= ((1 << vf
) |
8002 (1 << (vf
+ E1000_DTXSWC_VLAN_SPOOF_SHIFT
)));
8004 reg_val
&= ~((1 << vf
) |
8005 (1 << (vf
+ E1000_DTXSWC_VLAN_SPOOF_SHIFT
)));
8006 wr32(reg_offset
, reg_val
);
8008 adapter
->vf_data
[vf
].spoofchk_enabled
= setting
;
8012 static int igb_ndo_get_vf_config(struct net_device
*netdev
,
8013 int vf
, struct ifla_vf_info
*ivi
)
8015 struct igb_adapter
*adapter
= netdev_priv(netdev
);
8016 if (vf
>= adapter
->vfs_allocated_count
)
8019 memcpy(&ivi
->mac
, adapter
->vf_data
[vf
].vf_mac_addresses
, ETH_ALEN
);
8020 ivi
->max_tx_rate
= adapter
->vf_data
[vf
].tx_rate
;
8021 ivi
->min_tx_rate
= 0;
8022 ivi
->vlan
= adapter
->vf_data
[vf
].pf_vlan
;
8023 ivi
->qos
= adapter
->vf_data
[vf
].pf_qos
;
8024 ivi
->spoofchk
= adapter
->vf_data
[vf
].spoofchk_enabled
;
8028 static void igb_vmm_control(struct igb_adapter
*adapter
)
8030 struct e1000_hw
*hw
= &adapter
->hw
;
8033 switch (hw
->mac
.type
) {
8039 /* replication is not supported for 82575 */
8042 /* notify HW that the MAC is adding vlan tags */
8043 reg
= rd32(E1000_DTXCTL
);
8044 reg
|= E1000_DTXCTL_VLAN_ADDED
;
8045 wr32(E1000_DTXCTL
, reg
);
8048 /* enable replication vlan tag stripping */
8049 reg
= rd32(E1000_RPLOLR
);
8050 reg
|= E1000_RPLOLR_STRVLAN
;
8051 wr32(E1000_RPLOLR
, reg
);
8054 /* none of the above registers are supported by i350 */
8058 if (adapter
->vfs_allocated_count
) {
8059 igb_vmdq_set_loopback_pf(hw
, true);
8060 igb_vmdq_set_replication_pf(hw
, true);
8061 igb_vmdq_set_anti_spoofing_pf(hw
, true,
8062 adapter
->vfs_allocated_count
);
8064 igb_vmdq_set_loopback_pf(hw
, false);
8065 igb_vmdq_set_replication_pf(hw
, false);
8069 static void igb_init_dmac(struct igb_adapter
*adapter
, u32 pba
)
8071 struct e1000_hw
*hw
= &adapter
->hw
;
8075 if (hw
->mac
.type
> e1000_82580
) {
8076 if (adapter
->flags
& IGB_FLAG_DMAC
) {
8079 /* force threshold to 0. */
8080 wr32(E1000_DMCTXTH
, 0);
8082 /* DMA Coalescing high water mark needs to be greater
8083 * than the Rx threshold. Set hwm to PBA - max frame
8084 * size in 16B units, capping it at PBA - 6KB.
8086 hwm
= 64 * (pba
- 6);
8087 reg
= rd32(E1000_FCRTC
);
8088 reg
&= ~E1000_FCRTC_RTH_COAL_MASK
;
8089 reg
|= ((hwm
<< E1000_FCRTC_RTH_COAL_SHIFT
)
8090 & E1000_FCRTC_RTH_COAL_MASK
);
8091 wr32(E1000_FCRTC
, reg
);
8093 /* Set the DMA Coalescing Rx threshold to PBA - 2 * max
8094 * frame size, capping it at PBA - 10KB.
8096 dmac_thr
= pba
- 10;
8097 reg
= rd32(E1000_DMACR
);
8098 reg
&= ~E1000_DMACR_DMACTHR_MASK
;
8099 reg
|= ((dmac_thr
<< E1000_DMACR_DMACTHR_SHIFT
)
8100 & E1000_DMACR_DMACTHR_MASK
);
8102 /* transition to L0x or L1 if available..*/
8103 reg
|= (E1000_DMACR_DMAC_EN
| E1000_DMACR_DMAC_LX_MASK
);
8105 /* watchdog timer= +-1000 usec in 32usec intervals */
8108 /* Disable BMC-to-OS Watchdog Enable */
8109 if (hw
->mac
.type
!= e1000_i354
)
8110 reg
&= ~E1000_DMACR_DC_BMC2OSW_EN
;
8112 wr32(E1000_DMACR
, reg
);
8114 /* no lower threshold to disable
8115 * coalescing(smart fifb)-UTRESH=0
8117 wr32(E1000_DMCRTRH
, 0);
8119 reg
= (IGB_DMCTLX_DCFLUSH_DIS
| 0x4);
8121 wr32(E1000_DMCTLX
, reg
);
8123 /* free space in tx packet buffer to wake from
8126 wr32(E1000_DMCTXTH
, (IGB_MIN_TXPBSIZE
-
8127 (IGB_TX_BUF_4096
+ adapter
->max_frame_size
)) >> 6);
8129 /* make low power state decision controlled
8132 reg
= rd32(E1000_PCIEMISC
);
8133 reg
&= ~E1000_PCIEMISC_LX_DECISION
;
8134 wr32(E1000_PCIEMISC
, reg
);
8135 } /* endif adapter->dmac is not disabled */
8136 } else if (hw
->mac
.type
== e1000_82580
) {
8137 u32 reg
= rd32(E1000_PCIEMISC
);
8139 wr32(E1000_PCIEMISC
, reg
& ~E1000_PCIEMISC_LX_DECISION
);
8140 wr32(E1000_DMACR
, 0);
8145 * igb_read_i2c_byte - Reads 8 bit word over I2C
8146 * @hw: pointer to hardware structure
8147 * @byte_offset: byte offset to read
8148 * @dev_addr: device address
8151 * Performs byte read operation over I2C interface at
8152 * a specified device address.
8154 s32
igb_read_i2c_byte(struct e1000_hw
*hw
, u8 byte_offset
,
8155 u8 dev_addr
, u8
*data
)
8157 struct igb_adapter
*adapter
= container_of(hw
, struct igb_adapter
, hw
);
8158 struct i2c_client
*this_client
= adapter
->i2c_client
;
8163 return E1000_ERR_I2C
;
8165 swfw_mask
= E1000_SWFW_PHY0_SM
;
8167 if (hw
->mac
.ops
.acquire_swfw_sync(hw
, swfw_mask
))
8168 return E1000_ERR_SWFW_SYNC
;
8170 status
= i2c_smbus_read_byte_data(this_client
, byte_offset
);
8171 hw
->mac
.ops
.release_swfw_sync(hw
, swfw_mask
);
8174 return E1000_ERR_I2C
;
8182 * igb_write_i2c_byte - Writes 8 bit word over I2C
8183 * @hw: pointer to hardware structure
8184 * @byte_offset: byte offset to write
8185 * @dev_addr: device address
8186 * @data: value to write
8188 * Performs byte write operation over I2C interface at
8189 * a specified device address.
8191 s32
igb_write_i2c_byte(struct e1000_hw
*hw
, u8 byte_offset
,
8192 u8 dev_addr
, u8 data
)
8194 struct igb_adapter
*adapter
= container_of(hw
, struct igb_adapter
, hw
);
8195 struct i2c_client
*this_client
= adapter
->i2c_client
;
8197 u16 swfw_mask
= E1000_SWFW_PHY0_SM
;
8200 return E1000_ERR_I2C
;
8202 if (hw
->mac
.ops
.acquire_swfw_sync(hw
, swfw_mask
))
8203 return E1000_ERR_SWFW_SYNC
;
8204 status
= i2c_smbus_write_byte_data(this_client
, byte_offset
, data
);
8205 hw
->mac
.ops
.release_swfw_sync(hw
, swfw_mask
);
8208 return E1000_ERR_I2C
;
8214 int igb_reinit_queues(struct igb_adapter
*adapter
)
8216 struct net_device
*netdev
= adapter
->netdev
;
8217 struct pci_dev
*pdev
= adapter
->pdev
;
8220 if (netif_running(netdev
))
8223 igb_reset_interrupt_capability(adapter
);
8225 if (igb_init_interrupt_scheme(adapter
, true)) {
8226 dev_err(&pdev
->dev
, "Unable to allocate memory for queues\n");
8230 if (netif_running(netdev
))
8231 err
= igb_open(netdev
);