1 /* Intel(R) Gigabit Ethernet Linux driver
2 * Copyright(c) 2007-2014 Intel Corporation.
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
13 * You should have received a copy of the GNU General Public License along with
14 * this program; if not, see <http://www.gnu.org/licenses/>.
16 * The full GNU General Public License is included in this distribution in
17 * the file called "COPYING".
19 * Contact Information:
20 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
21 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
24 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
26 #include <linux/module.h>
27 #include <linux/types.h>
28 #include <linux/init.h>
29 #include <linux/bitops.h>
30 #include <linux/vmalloc.h>
31 #include <linux/pagemap.h>
32 #include <linux/netdevice.h>
33 #include <linux/ipv6.h>
34 #include <linux/slab.h>
35 #include <net/checksum.h>
36 #include <net/ip6_checksum.h>
37 #include <linux/net_tstamp.h>
38 #include <linux/mii.h>
39 #include <linux/ethtool.h>
41 #include <linux/if_vlan.h>
42 #include <linux/pci.h>
43 #include <linux/pci-aspm.h>
44 #include <linux/delay.h>
45 #include <linux/interrupt.h>
47 #include <linux/tcp.h>
48 #include <linux/sctp.h>
49 #include <linux/if_ether.h>
50 #include <linux/aer.h>
51 #include <linux/prefetch.h>
52 #include <linux/pm_runtime.h>
53 #include <linux/etherdevice.h>
55 #include <linux/dca.h>
57 #include <linux/i2c.h>
63 #define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \
64 __stringify(BUILD) "-k"
65 char igb_driver_name
[] = "igb";
66 char igb_driver_version
[] = DRV_VERSION
;
67 static const char igb_driver_string
[] =
68 "Intel(R) Gigabit Ethernet Network Driver";
69 static const char igb_copyright
[] =
70 "Copyright (c) 2007-2014 Intel Corporation.";
72 static const struct e1000_info
*igb_info_tbl
[] = {
73 [board_82575
] = &e1000_82575_info
,
76 static const struct pci_device_id igb_pci_tbl
[] = {
77 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I354_BACKPLANE_1GBPS
) },
78 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I354_SGMII
) },
79 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I354_BACKPLANE_2_5GBPS
) },
80 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I211_COPPER
), board_82575
},
81 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I210_COPPER
), board_82575
},
82 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I210_FIBER
), board_82575
},
83 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I210_SERDES
), board_82575
},
84 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I210_SGMII
), board_82575
},
85 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I210_COPPER_FLASHLESS
), board_82575
},
86 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I210_SERDES_FLASHLESS
), board_82575
},
87 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I350_COPPER
), board_82575
},
88 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I350_FIBER
), board_82575
},
89 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I350_SERDES
), board_82575
},
90 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_I350_SGMII
), board_82575
},
91 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_COPPER
), board_82575
},
92 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_FIBER
), board_82575
},
93 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_QUAD_FIBER
), board_82575
},
94 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_SERDES
), board_82575
},
95 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_SGMII
), board_82575
},
96 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82580_COPPER_DUAL
), board_82575
},
97 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_DH89XXCC_SGMII
), board_82575
},
98 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_DH89XXCC_SERDES
), board_82575
},
99 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_DH89XXCC_BACKPLANE
), board_82575
},
100 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_DH89XXCC_SFP
), board_82575
},
101 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576
), board_82575
},
102 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_NS
), board_82575
},
103 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_NS_SERDES
), board_82575
},
104 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_FIBER
), board_82575
},
105 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_SERDES
), board_82575
},
106 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_SERDES_QUAD
), board_82575
},
107 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_QUAD_COPPER_ET2
), board_82575
},
108 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_QUAD_COPPER
), board_82575
},
109 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82575EB_COPPER
), board_82575
},
110 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82575EB_FIBER_SERDES
), board_82575
},
111 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82575GB_QUAD_COPPER
), board_82575
},
112 /* required last entry */
116 MODULE_DEVICE_TABLE(pci
, igb_pci_tbl
);
118 static int igb_setup_all_tx_resources(struct igb_adapter
*);
119 static int igb_setup_all_rx_resources(struct igb_adapter
*);
120 static void igb_free_all_tx_resources(struct igb_adapter
*);
121 static void igb_free_all_rx_resources(struct igb_adapter
*);
122 static void igb_setup_mrqc(struct igb_adapter
*);
123 static int igb_probe(struct pci_dev
*, const struct pci_device_id
*);
124 static void igb_remove(struct pci_dev
*pdev
);
125 static int igb_sw_init(struct igb_adapter
*);
126 int igb_open(struct net_device
*);
127 int igb_close(struct net_device
*);
128 static void igb_configure(struct igb_adapter
*);
129 static void igb_configure_tx(struct igb_adapter
*);
130 static void igb_configure_rx(struct igb_adapter
*);
131 static void igb_clean_all_tx_rings(struct igb_adapter
*);
132 static void igb_clean_all_rx_rings(struct igb_adapter
*);
133 static void igb_clean_tx_ring(struct igb_ring
*);
134 static void igb_clean_rx_ring(struct igb_ring
*);
135 static void igb_set_rx_mode(struct net_device
*);
136 static void igb_update_phy_info(unsigned long);
137 static void igb_watchdog(unsigned long);
138 static void igb_watchdog_task(struct work_struct
*);
139 static netdev_tx_t
igb_xmit_frame(struct sk_buff
*skb
, struct net_device
*);
140 static struct rtnl_link_stats64
*igb_get_stats64(struct net_device
*dev
,
141 struct rtnl_link_stats64
*stats
);
142 static int igb_change_mtu(struct net_device
*, int);
143 static int igb_set_mac(struct net_device
*, void *);
144 static void igb_set_uta(struct igb_adapter
*adapter
, bool set
);
145 static irqreturn_t
igb_intr(int irq
, void *);
146 static irqreturn_t
igb_intr_msi(int irq
, void *);
147 static irqreturn_t
igb_msix_other(int irq
, void *);
148 static irqreturn_t
igb_msix_ring(int irq
, void *);
149 #ifdef CONFIG_IGB_DCA
150 static void igb_update_dca(struct igb_q_vector
*);
151 static void igb_setup_dca(struct igb_adapter
*);
152 #endif /* CONFIG_IGB_DCA */
153 static int igb_poll(struct napi_struct
*, int);
154 static bool igb_clean_tx_irq(struct igb_q_vector
*, int);
155 static int igb_clean_rx_irq(struct igb_q_vector
*, int);
156 static int igb_ioctl(struct net_device
*, struct ifreq
*, int cmd
);
157 static void igb_tx_timeout(struct net_device
*);
158 static void igb_reset_task(struct work_struct
*);
159 static void igb_vlan_mode(struct net_device
*netdev
,
160 netdev_features_t features
);
161 static int igb_vlan_rx_add_vid(struct net_device
*, __be16
, u16
);
162 static int igb_vlan_rx_kill_vid(struct net_device
*, __be16
, u16
);
163 static void igb_restore_vlan(struct igb_adapter
*);
164 static void igb_rar_set_qsel(struct igb_adapter
*, u8
*, u32
, u8
);
165 static void igb_ping_all_vfs(struct igb_adapter
*);
166 static void igb_msg_task(struct igb_adapter
*);
167 static void igb_vmm_control(struct igb_adapter
*);
168 static int igb_set_vf_mac(struct igb_adapter
*, int, unsigned char *);
169 static void igb_restore_vf_multicasts(struct igb_adapter
*adapter
);
170 static int igb_ndo_set_vf_mac(struct net_device
*netdev
, int vf
, u8
*mac
);
171 static int igb_ndo_set_vf_vlan(struct net_device
*netdev
,
172 int vf
, u16 vlan
, u8 qos
);
173 static int igb_ndo_set_vf_bw(struct net_device
*, int, int, int);
174 static int igb_ndo_set_vf_spoofchk(struct net_device
*netdev
, int vf
,
176 static int igb_ndo_get_vf_config(struct net_device
*netdev
, int vf
,
177 struct ifla_vf_info
*ivi
);
178 static void igb_check_vf_rate_limit(struct igb_adapter
*);
180 #ifdef CONFIG_PCI_IOV
181 static int igb_vf_configure(struct igb_adapter
*adapter
, int vf
);
182 static int igb_pci_enable_sriov(struct pci_dev
*dev
, int num_vfs
);
183 static int igb_disable_sriov(struct pci_dev
*dev
);
184 static int igb_pci_disable_sriov(struct pci_dev
*dev
);
188 #ifdef CONFIG_PM_SLEEP
189 static int igb_suspend(struct device
*);
191 static int igb_resume(struct device
*);
192 static int igb_runtime_suspend(struct device
*dev
);
193 static int igb_runtime_resume(struct device
*dev
);
194 static int igb_runtime_idle(struct device
*dev
);
195 static const struct dev_pm_ops igb_pm_ops
= {
196 SET_SYSTEM_SLEEP_PM_OPS(igb_suspend
, igb_resume
)
197 SET_RUNTIME_PM_OPS(igb_runtime_suspend
, igb_runtime_resume
,
201 static void igb_shutdown(struct pci_dev
*);
202 static int igb_pci_sriov_configure(struct pci_dev
*dev
, int num_vfs
);
203 #ifdef CONFIG_IGB_DCA
204 static int igb_notify_dca(struct notifier_block
*, unsigned long, void *);
205 static struct notifier_block dca_notifier
= {
206 .notifier_call
= igb_notify_dca
,
211 #ifdef CONFIG_NET_POLL_CONTROLLER
212 /* for netdump / net console */
213 static void igb_netpoll(struct net_device
*);
215 #ifdef CONFIG_PCI_IOV
216 static unsigned int max_vfs
;
217 module_param(max_vfs
, uint
, 0);
218 MODULE_PARM_DESC(max_vfs
, "Maximum number of virtual functions to allocate per physical function");
219 #endif /* CONFIG_PCI_IOV */
221 static pci_ers_result_t
igb_io_error_detected(struct pci_dev
*,
222 pci_channel_state_t
);
223 static pci_ers_result_t
igb_io_slot_reset(struct pci_dev
*);
224 static void igb_io_resume(struct pci_dev
*);
226 static const struct pci_error_handlers igb_err_handler
= {
227 .error_detected
= igb_io_error_detected
,
228 .slot_reset
= igb_io_slot_reset
,
229 .resume
= igb_io_resume
,
232 static void igb_init_dmac(struct igb_adapter
*adapter
, u32 pba
);
234 static struct pci_driver igb_driver
= {
235 .name
= igb_driver_name
,
236 .id_table
= igb_pci_tbl
,
238 .remove
= igb_remove
,
240 .driver
.pm
= &igb_pm_ops
,
242 .shutdown
= igb_shutdown
,
243 .sriov_configure
= igb_pci_sriov_configure
,
244 .err_handler
= &igb_err_handler
247 MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
248 MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
249 MODULE_LICENSE("GPL");
250 MODULE_VERSION(DRV_VERSION
);
252 #define DEFAULT_MSG_ENABLE (NETIF_MSG_DRV|NETIF_MSG_PROBE|NETIF_MSG_LINK)
253 static int debug
= -1;
254 module_param(debug
, int, 0);
255 MODULE_PARM_DESC(debug
, "Debug level (0=none,...,16=all)");
257 struct igb_reg_info
{
262 static const struct igb_reg_info igb_reg_info_tbl
[] = {
264 /* General Registers */
265 {E1000_CTRL
, "CTRL"},
266 {E1000_STATUS
, "STATUS"},
267 {E1000_CTRL_EXT
, "CTRL_EXT"},
269 /* Interrupt Registers */
273 {E1000_RCTL
, "RCTL"},
274 {E1000_RDLEN(0), "RDLEN"},
275 {E1000_RDH(0), "RDH"},
276 {E1000_RDT(0), "RDT"},
277 {E1000_RXDCTL(0), "RXDCTL"},
278 {E1000_RDBAL(0), "RDBAL"},
279 {E1000_RDBAH(0), "RDBAH"},
282 {E1000_TCTL
, "TCTL"},
283 {E1000_TDBAL(0), "TDBAL"},
284 {E1000_TDBAH(0), "TDBAH"},
285 {E1000_TDLEN(0), "TDLEN"},
286 {E1000_TDH(0), "TDH"},
287 {E1000_TDT(0), "TDT"},
288 {E1000_TXDCTL(0), "TXDCTL"},
289 {E1000_TDFH
, "TDFH"},
290 {E1000_TDFT
, "TDFT"},
291 {E1000_TDFHS
, "TDFHS"},
292 {E1000_TDFPC
, "TDFPC"},
294 /* List Terminator */
298 /* igb_regdump - register printout routine */
299 static void igb_regdump(struct e1000_hw
*hw
, struct igb_reg_info
*reginfo
)
305 switch (reginfo
->ofs
) {
307 for (n
= 0; n
< 4; n
++)
308 regs
[n
] = rd32(E1000_RDLEN(n
));
311 for (n
= 0; n
< 4; n
++)
312 regs
[n
] = rd32(E1000_RDH(n
));
315 for (n
= 0; n
< 4; n
++)
316 regs
[n
] = rd32(E1000_RDT(n
));
318 case E1000_RXDCTL(0):
319 for (n
= 0; n
< 4; n
++)
320 regs
[n
] = rd32(E1000_RXDCTL(n
));
323 for (n
= 0; n
< 4; n
++)
324 regs
[n
] = rd32(E1000_RDBAL(n
));
327 for (n
= 0; n
< 4; n
++)
328 regs
[n
] = rd32(E1000_RDBAH(n
));
331 for (n
= 0; n
< 4; n
++)
332 regs
[n
] = rd32(E1000_RDBAL(n
));
335 for (n
= 0; n
< 4; n
++)
336 regs
[n
] = rd32(E1000_TDBAH(n
));
339 for (n
= 0; n
< 4; n
++)
340 regs
[n
] = rd32(E1000_TDLEN(n
));
343 for (n
= 0; n
< 4; n
++)
344 regs
[n
] = rd32(E1000_TDH(n
));
347 for (n
= 0; n
< 4; n
++)
348 regs
[n
] = rd32(E1000_TDT(n
));
350 case E1000_TXDCTL(0):
351 for (n
= 0; n
< 4; n
++)
352 regs
[n
] = rd32(E1000_TXDCTL(n
));
355 pr_info("%-15s %08x\n", reginfo
->name
, rd32(reginfo
->ofs
));
359 snprintf(rname
, 16, "%s%s", reginfo
->name
, "[0-3]");
360 pr_info("%-15s %08x %08x %08x %08x\n", rname
, regs
[0], regs
[1],
364 /* igb_dump - Print registers, Tx-rings and Rx-rings */
365 static void igb_dump(struct igb_adapter
*adapter
)
367 struct net_device
*netdev
= adapter
->netdev
;
368 struct e1000_hw
*hw
= &adapter
->hw
;
369 struct igb_reg_info
*reginfo
;
370 struct igb_ring
*tx_ring
;
371 union e1000_adv_tx_desc
*tx_desc
;
372 struct my_u0
{ u64 a
; u64 b
; } *u0
;
373 struct igb_ring
*rx_ring
;
374 union e1000_adv_rx_desc
*rx_desc
;
378 if (!netif_msg_hw(adapter
))
381 /* Print netdevice Info */
383 dev_info(&adapter
->pdev
->dev
, "Net device Info\n");
384 pr_info("Device Name state trans_start last_rx\n");
385 pr_info("%-15s %016lX %016lX %016lX\n", netdev
->name
,
386 netdev
->state
, dev_trans_start(netdev
), netdev
->last_rx
);
389 /* Print Registers */
390 dev_info(&adapter
->pdev
->dev
, "Register Dump\n");
391 pr_info(" Register Name Value\n");
392 for (reginfo
= (struct igb_reg_info
*)igb_reg_info_tbl
;
393 reginfo
->name
; reginfo
++) {
394 igb_regdump(hw
, reginfo
);
397 /* Print TX Ring Summary */
398 if (!netdev
|| !netif_running(netdev
))
401 dev_info(&adapter
->pdev
->dev
, "TX Rings Summary\n");
402 pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n");
403 for (n
= 0; n
< adapter
->num_tx_queues
; n
++) {
404 struct igb_tx_buffer
*buffer_info
;
405 tx_ring
= adapter
->tx_ring
[n
];
406 buffer_info
= &tx_ring
->tx_buffer_info
[tx_ring
->next_to_clean
];
407 pr_info(" %5d %5X %5X %016llX %04X %p %016llX\n",
408 n
, tx_ring
->next_to_use
, tx_ring
->next_to_clean
,
409 (u64
)dma_unmap_addr(buffer_info
, dma
),
410 dma_unmap_len(buffer_info
, len
),
411 buffer_info
->next_to_watch
,
412 (u64
)buffer_info
->time_stamp
);
416 if (!netif_msg_tx_done(adapter
))
417 goto rx_ring_summary
;
419 dev_info(&adapter
->pdev
->dev
, "TX Rings Dump\n");
421 /* Transmit Descriptor Formats
423 * Advanced Transmit Descriptor
424 * +--------------------------------------------------------------+
425 * 0 | Buffer Address [63:0] |
426 * +--------------------------------------------------------------+
427 * 8 | PAYLEN | PORTS |CC|IDX | STA | DCMD |DTYP|MAC|RSV| DTALEN |
428 * +--------------------------------------------------------------+
429 * 63 46 45 40 39 38 36 35 32 31 24 15 0
432 for (n
= 0; n
< adapter
->num_tx_queues
; n
++) {
433 tx_ring
= adapter
->tx_ring
[n
];
434 pr_info("------------------------------------\n");
435 pr_info("TX QUEUE INDEX = %d\n", tx_ring
->queue_index
);
436 pr_info("------------------------------------\n");
437 pr_info("T [desc] [address 63:0 ] [PlPOCIStDDM Ln] [bi->dma ] leng ntw timestamp bi->skb\n");
439 for (i
= 0; tx_ring
->desc
&& (i
< tx_ring
->count
); i
++) {
440 const char *next_desc
;
441 struct igb_tx_buffer
*buffer_info
;
442 tx_desc
= IGB_TX_DESC(tx_ring
, i
);
443 buffer_info
= &tx_ring
->tx_buffer_info
[i
];
444 u0
= (struct my_u0
*)tx_desc
;
445 if (i
== tx_ring
->next_to_use
&&
446 i
== tx_ring
->next_to_clean
)
447 next_desc
= " NTC/U";
448 else if (i
== tx_ring
->next_to_use
)
450 else if (i
== tx_ring
->next_to_clean
)
455 pr_info("T [0x%03X] %016llX %016llX %016llX %04X %p %016llX %p%s\n",
456 i
, le64_to_cpu(u0
->a
),
458 (u64
)dma_unmap_addr(buffer_info
, dma
),
459 dma_unmap_len(buffer_info
, len
),
460 buffer_info
->next_to_watch
,
461 (u64
)buffer_info
->time_stamp
,
462 buffer_info
->skb
, next_desc
);
464 if (netif_msg_pktdata(adapter
) && buffer_info
->skb
)
465 print_hex_dump(KERN_INFO
, "",
467 16, 1, buffer_info
->skb
->data
,
468 dma_unmap_len(buffer_info
, len
),
473 /* Print RX Rings Summary */
475 dev_info(&adapter
->pdev
->dev
, "RX Rings Summary\n");
476 pr_info("Queue [NTU] [NTC]\n");
477 for (n
= 0; n
< adapter
->num_rx_queues
; n
++) {
478 rx_ring
= adapter
->rx_ring
[n
];
479 pr_info(" %5d %5X %5X\n",
480 n
, rx_ring
->next_to_use
, rx_ring
->next_to_clean
);
484 if (!netif_msg_rx_status(adapter
))
487 dev_info(&adapter
->pdev
->dev
, "RX Rings Dump\n");
489 /* Advanced Receive Descriptor (Read) Format
491 * +-----------------------------------------------------+
492 * 0 | Packet Buffer Address [63:1] |A0/NSE|
493 * +----------------------------------------------+------+
494 * 8 | Header Buffer Address [63:1] | DD |
495 * +-----------------------------------------------------+
498 * Advanced Receive Descriptor (Write-Back) Format
500 * 63 48 47 32 31 30 21 20 17 16 4 3 0
501 * +------------------------------------------------------+
502 * 0 | Packet IP |SPH| HDR_LEN | RSV|Packet| RSS |
503 * | Checksum Ident | | | | Type | Type |
504 * +------------------------------------------------------+
505 * 8 | VLAN Tag | Length | Extended Error | Extended Status |
506 * +------------------------------------------------------+
507 * 63 48 47 32 31 20 19 0
510 for (n
= 0; n
< adapter
->num_rx_queues
; n
++) {
511 rx_ring
= adapter
->rx_ring
[n
];
512 pr_info("------------------------------------\n");
513 pr_info("RX QUEUE INDEX = %d\n", rx_ring
->queue_index
);
514 pr_info("------------------------------------\n");
515 pr_info("R [desc] [ PktBuf A0] [ HeadBuf DD] [bi->dma ] [bi->skb] <-- Adv Rx Read format\n");
516 pr_info("RWB[desc] [PcsmIpSHl PtRs] [vl er S cks ln] ---------------- [bi->skb] <-- Adv Rx Write-Back format\n");
518 for (i
= 0; i
< rx_ring
->count
; i
++) {
519 const char *next_desc
;
520 struct igb_rx_buffer
*buffer_info
;
521 buffer_info
= &rx_ring
->rx_buffer_info
[i
];
522 rx_desc
= IGB_RX_DESC(rx_ring
, i
);
523 u0
= (struct my_u0
*)rx_desc
;
524 staterr
= le32_to_cpu(rx_desc
->wb
.upper
.status_error
);
526 if (i
== rx_ring
->next_to_use
)
528 else if (i
== rx_ring
->next_to_clean
)
533 if (staterr
& E1000_RXD_STAT_DD
) {
534 /* Descriptor Done */
535 pr_info("%s[0x%03X] %016llX %016llX ---------------- %s\n",
541 pr_info("%s[0x%03X] %016llX %016llX %016llX %s\n",
545 (u64
)buffer_info
->dma
,
548 if (netif_msg_pktdata(adapter
) &&
549 buffer_info
->dma
&& buffer_info
->page
) {
550 print_hex_dump(KERN_INFO
, "",
553 page_address(buffer_info
->page
) +
554 buffer_info
->page_offset
,
566 * igb_get_i2c_data - Reads the I2C SDA data bit
567 * @hw: pointer to hardware structure
568 * @i2cctl: Current value of I2CCTL register
570 * Returns the I2C data bit value
572 static int igb_get_i2c_data(void *data
)
574 struct igb_adapter
*adapter
= (struct igb_adapter
*)data
;
575 struct e1000_hw
*hw
= &adapter
->hw
;
576 s32 i2cctl
= rd32(E1000_I2CPARAMS
);
578 return !!(i2cctl
& E1000_I2C_DATA_IN
);
582 * igb_set_i2c_data - Sets the I2C data bit
583 * @data: pointer to hardware structure
584 * @state: I2C data value (0 or 1) to set
586 * Sets the I2C data bit
588 static void igb_set_i2c_data(void *data
, int state
)
590 struct igb_adapter
*adapter
= (struct igb_adapter
*)data
;
591 struct e1000_hw
*hw
= &adapter
->hw
;
592 s32 i2cctl
= rd32(E1000_I2CPARAMS
);
595 i2cctl
|= E1000_I2C_DATA_OUT
;
597 i2cctl
&= ~E1000_I2C_DATA_OUT
;
599 i2cctl
&= ~E1000_I2C_DATA_OE_N
;
600 i2cctl
|= E1000_I2C_CLK_OE_N
;
601 wr32(E1000_I2CPARAMS
, i2cctl
);
607 * igb_set_i2c_clk - Sets the I2C SCL clock
608 * @data: pointer to hardware structure
609 * @state: state to set clock
611 * Sets the I2C clock line to state
613 static void igb_set_i2c_clk(void *data
, int state
)
615 struct igb_adapter
*adapter
= (struct igb_adapter
*)data
;
616 struct e1000_hw
*hw
= &adapter
->hw
;
617 s32 i2cctl
= rd32(E1000_I2CPARAMS
);
620 i2cctl
|= E1000_I2C_CLK_OUT
;
621 i2cctl
&= ~E1000_I2C_CLK_OE_N
;
623 i2cctl
&= ~E1000_I2C_CLK_OUT
;
624 i2cctl
&= ~E1000_I2C_CLK_OE_N
;
626 wr32(E1000_I2CPARAMS
, i2cctl
);
631 * igb_get_i2c_clk - Gets the I2C SCL clock state
632 * @data: pointer to hardware structure
634 * Gets the I2C clock state
636 static int igb_get_i2c_clk(void *data
)
638 struct igb_adapter
*adapter
= (struct igb_adapter
*)data
;
639 struct e1000_hw
*hw
= &adapter
->hw
;
640 s32 i2cctl
= rd32(E1000_I2CPARAMS
);
642 return !!(i2cctl
& E1000_I2C_CLK_IN
);
645 static const struct i2c_algo_bit_data igb_i2c_algo
= {
646 .setsda
= igb_set_i2c_data
,
647 .setscl
= igb_set_i2c_clk
,
648 .getsda
= igb_get_i2c_data
,
649 .getscl
= igb_get_i2c_clk
,
655 * igb_get_hw_dev - return device
656 * @hw: pointer to hardware structure
658 * used by hardware layer to print debugging information
660 struct net_device
*igb_get_hw_dev(struct e1000_hw
*hw
)
662 struct igb_adapter
*adapter
= hw
->back
;
663 return adapter
->netdev
;
667 * igb_init_module - Driver Registration Routine
669 * igb_init_module is the first routine called when the driver is
670 * loaded. All it does is register with the PCI subsystem.
672 static int __init
igb_init_module(void)
676 pr_info("%s - version %s\n",
677 igb_driver_string
, igb_driver_version
);
678 pr_info("%s\n", igb_copyright
);
680 #ifdef CONFIG_IGB_DCA
681 dca_register_notify(&dca_notifier
);
683 ret
= pci_register_driver(&igb_driver
);
687 module_init(igb_init_module
);
690 * igb_exit_module - Driver Exit Cleanup Routine
692 * igb_exit_module is called just before the driver is removed
695 static void __exit
igb_exit_module(void)
697 #ifdef CONFIG_IGB_DCA
698 dca_unregister_notify(&dca_notifier
);
700 pci_unregister_driver(&igb_driver
);
703 module_exit(igb_exit_module
);
705 #define Q_IDX_82576(i) (((i & 0x1) << 3) + (i >> 1))
707 * igb_cache_ring_register - Descriptor ring to register mapping
708 * @adapter: board private structure to initialize
710 * Once we know the feature-set enabled for the device, we'll cache
711 * the register offset the descriptor ring is assigned to.
713 static void igb_cache_ring_register(struct igb_adapter
*adapter
)
716 u32 rbase_offset
= adapter
->vfs_allocated_count
;
718 switch (adapter
->hw
.mac
.type
) {
720 /* The queues are allocated for virtualization such that VF 0
721 * is allocated queues 0 and 8, VF 1 queues 1 and 9, etc.
722 * In order to avoid collision we start at the first free queue
723 * and continue consuming queues in the same sequence
725 if (adapter
->vfs_allocated_count
) {
726 for (; i
< adapter
->rss_queues
; i
++)
727 adapter
->rx_ring
[i
]->reg_idx
= rbase_offset
+
739 for (; i
< adapter
->num_rx_queues
; i
++)
740 adapter
->rx_ring
[i
]->reg_idx
= rbase_offset
+ i
;
741 for (; j
< adapter
->num_tx_queues
; j
++)
742 adapter
->tx_ring
[j
]->reg_idx
= rbase_offset
+ j
;
747 u32
igb_rd32(struct e1000_hw
*hw
, u32 reg
)
749 struct igb_adapter
*igb
= container_of(hw
, struct igb_adapter
, hw
);
750 u8 __iomem
*hw_addr
= ACCESS_ONCE(hw
->hw_addr
);
753 if (E1000_REMOVED(hw_addr
))
756 value
= readl(&hw_addr
[reg
]);
758 /* reads should not return all F's */
759 if (!(~value
) && (!reg
|| !(~readl(hw_addr
)))) {
760 struct net_device
*netdev
= igb
->netdev
;
762 netif_device_detach(netdev
);
763 netdev_err(netdev
, "PCIe link lost, device now detached\n");
770 * igb_write_ivar - configure ivar for given MSI-X vector
771 * @hw: pointer to the HW structure
772 * @msix_vector: vector number we are allocating to a given ring
773 * @index: row index of IVAR register to write within IVAR table
774 * @offset: column offset of in IVAR, should be multiple of 8
776 * This function is intended to handle the writing of the IVAR register
777 * for adapters 82576 and newer. The IVAR table consists of 2 columns,
778 * each containing an cause allocation for an Rx and Tx ring, and a
779 * variable number of rows depending on the number of queues supported.
781 static void igb_write_ivar(struct e1000_hw
*hw
, int msix_vector
,
782 int index
, int offset
)
784 u32 ivar
= array_rd32(E1000_IVAR0
, index
);
786 /* clear any bits that are currently set */
787 ivar
&= ~((u32
)0xFF << offset
);
789 /* write vector and valid bit */
790 ivar
|= (msix_vector
| E1000_IVAR_VALID
) << offset
;
792 array_wr32(E1000_IVAR0
, index
, ivar
);
795 #define IGB_N0_QUEUE -1
796 static void igb_assign_vector(struct igb_q_vector
*q_vector
, int msix_vector
)
798 struct igb_adapter
*adapter
= q_vector
->adapter
;
799 struct e1000_hw
*hw
= &adapter
->hw
;
800 int rx_queue
= IGB_N0_QUEUE
;
801 int tx_queue
= IGB_N0_QUEUE
;
804 if (q_vector
->rx
.ring
)
805 rx_queue
= q_vector
->rx
.ring
->reg_idx
;
806 if (q_vector
->tx
.ring
)
807 tx_queue
= q_vector
->tx
.ring
->reg_idx
;
809 switch (hw
->mac
.type
) {
811 /* The 82575 assigns vectors using a bitmask, which matches the
812 * bitmask for the EICR/EIMS/EIMC registers. To assign one
813 * or more queues to a vector, we write the appropriate bits
814 * into the MSIXBM register for that vector.
816 if (rx_queue
> IGB_N0_QUEUE
)
817 msixbm
= E1000_EICR_RX_QUEUE0
<< rx_queue
;
818 if (tx_queue
> IGB_N0_QUEUE
)
819 msixbm
|= E1000_EICR_TX_QUEUE0
<< tx_queue
;
820 if (!(adapter
->flags
& IGB_FLAG_HAS_MSIX
) && msix_vector
== 0)
821 msixbm
|= E1000_EIMS_OTHER
;
822 array_wr32(E1000_MSIXBM(0), msix_vector
, msixbm
);
823 q_vector
->eims_value
= msixbm
;
826 /* 82576 uses a table that essentially consists of 2 columns
827 * with 8 rows. The ordering is column-major so we use the
828 * lower 3 bits as the row index, and the 4th bit as the
831 if (rx_queue
> IGB_N0_QUEUE
)
832 igb_write_ivar(hw
, msix_vector
,
834 (rx_queue
& 0x8) << 1);
835 if (tx_queue
> IGB_N0_QUEUE
)
836 igb_write_ivar(hw
, msix_vector
,
838 ((tx_queue
& 0x8) << 1) + 8);
839 q_vector
->eims_value
= BIT(msix_vector
);
846 /* On 82580 and newer adapters the scheme is similar to 82576
847 * however instead of ordering column-major we have things
848 * ordered row-major. So we traverse the table by using
849 * bit 0 as the column offset, and the remaining bits as the
852 if (rx_queue
> IGB_N0_QUEUE
)
853 igb_write_ivar(hw
, msix_vector
,
855 (rx_queue
& 0x1) << 4);
856 if (tx_queue
> IGB_N0_QUEUE
)
857 igb_write_ivar(hw
, msix_vector
,
859 ((tx_queue
& 0x1) << 4) + 8);
860 q_vector
->eims_value
= BIT(msix_vector
);
867 /* add q_vector eims value to global eims_enable_mask */
868 adapter
->eims_enable_mask
|= q_vector
->eims_value
;
870 /* configure q_vector to set itr on first interrupt */
871 q_vector
->set_itr
= 1;
875 * igb_configure_msix - Configure MSI-X hardware
876 * @adapter: board private structure to initialize
878 * igb_configure_msix sets up the hardware to properly
879 * generate MSI-X interrupts.
881 static void igb_configure_msix(struct igb_adapter
*adapter
)
885 struct e1000_hw
*hw
= &adapter
->hw
;
887 adapter
->eims_enable_mask
= 0;
889 /* set vector for other causes, i.e. link changes */
890 switch (hw
->mac
.type
) {
892 tmp
= rd32(E1000_CTRL_EXT
);
893 /* enable MSI-X PBA support*/
894 tmp
|= E1000_CTRL_EXT_PBA_CLR
;
896 /* Auto-Mask interrupts upon ICR read. */
897 tmp
|= E1000_CTRL_EXT_EIAME
;
898 tmp
|= E1000_CTRL_EXT_IRCA
;
900 wr32(E1000_CTRL_EXT
, tmp
);
902 /* enable msix_other interrupt */
903 array_wr32(E1000_MSIXBM(0), vector
++, E1000_EIMS_OTHER
);
904 adapter
->eims_other
= E1000_EIMS_OTHER
;
914 /* Turn on MSI-X capability first, or our settings
915 * won't stick. And it will take days to debug.
917 wr32(E1000_GPIE
, E1000_GPIE_MSIX_MODE
|
918 E1000_GPIE_PBA
| E1000_GPIE_EIAME
|
921 /* enable msix_other interrupt */
922 adapter
->eims_other
= BIT(vector
);
923 tmp
= (vector
++ | E1000_IVAR_VALID
) << 8;
925 wr32(E1000_IVAR_MISC
, tmp
);
928 /* do nothing, since nothing else supports MSI-X */
930 } /* switch (hw->mac.type) */
932 adapter
->eims_enable_mask
|= adapter
->eims_other
;
934 for (i
= 0; i
< adapter
->num_q_vectors
; i
++)
935 igb_assign_vector(adapter
->q_vector
[i
], vector
++);
941 * igb_request_msix - Initialize MSI-X interrupts
942 * @adapter: board private structure to initialize
944 * igb_request_msix allocates MSI-X vectors and requests interrupts from the
947 static int igb_request_msix(struct igb_adapter
*adapter
)
949 struct net_device
*netdev
= adapter
->netdev
;
950 int i
, err
= 0, vector
= 0, free_vector
= 0;
952 err
= request_irq(adapter
->msix_entries
[vector
].vector
,
953 igb_msix_other
, 0, netdev
->name
, adapter
);
957 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
958 struct igb_q_vector
*q_vector
= adapter
->q_vector
[i
];
962 q_vector
->itr_register
= adapter
->io_addr
+ E1000_EITR(vector
);
964 if (q_vector
->rx
.ring
&& q_vector
->tx
.ring
)
965 sprintf(q_vector
->name
, "%s-TxRx-%u", netdev
->name
,
966 q_vector
->rx
.ring
->queue_index
);
967 else if (q_vector
->tx
.ring
)
968 sprintf(q_vector
->name
, "%s-tx-%u", netdev
->name
,
969 q_vector
->tx
.ring
->queue_index
);
970 else if (q_vector
->rx
.ring
)
971 sprintf(q_vector
->name
, "%s-rx-%u", netdev
->name
,
972 q_vector
->rx
.ring
->queue_index
);
974 sprintf(q_vector
->name
, "%s-unused", netdev
->name
);
976 err
= request_irq(adapter
->msix_entries
[vector
].vector
,
977 igb_msix_ring
, 0, q_vector
->name
,
983 igb_configure_msix(adapter
);
987 /* free already assigned IRQs */
988 free_irq(adapter
->msix_entries
[free_vector
++].vector
, adapter
);
991 for (i
= 0; i
< vector
; i
++) {
992 free_irq(adapter
->msix_entries
[free_vector
++].vector
,
993 adapter
->q_vector
[i
]);
1000 * igb_free_q_vector - Free memory allocated for specific interrupt vector
1001 * @adapter: board private structure to initialize
1002 * @v_idx: Index of vector to be freed
1004 * This function frees the memory allocated to the q_vector.
1006 static void igb_free_q_vector(struct igb_adapter
*adapter
, int v_idx
)
1008 struct igb_q_vector
*q_vector
= adapter
->q_vector
[v_idx
];
1010 adapter
->q_vector
[v_idx
] = NULL
;
1012 /* igb_get_stats64() might access the rings on this vector,
1013 * we must wait a grace period before freeing it.
1016 kfree_rcu(q_vector
, rcu
);
1020 * igb_reset_q_vector - Reset config for interrupt vector
1021 * @adapter: board private structure to initialize
1022 * @v_idx: Index of vector to be reset
1024 * If NAPI is enabled it will delete any references to the
1025 * NAPI struct. This is preparation for igb_free_q_vector.
1027 static void igb_reset_q_vector(struct igb_adapter
*adapter
, int v_idx
)
1029 struct igb_q_vector
*q_vector
= adapter
->q_vector
[v_idx
];
1031 /* Coming from igb_set_interrupt_capability, the vectors are not yet
1032 * allocated. So, q_vector is NULL so we should stop here.
1037 if (q_vector
->tx
.ring
)
1038 adapter
->tx_ring
[q_vector
->tx
.ring
->queue_index
] = NULL
;
1040 if (q_vector
->rx
.ring
)
1041 adapter
->rx_ring
[q_vector
->rx
.ring
->queue_index
] = NULL
;
1043 netif_napi_del(&q_vector
->napi
);
1047 static void igb_reset_interrupt_capability(struct igb_adapter
*adapter
)
1049 int v_idx
= adapter
->num_q_vectors
;
1051 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
)
1052 pci_disable_msix(adapter
->pdev
);
1053 else if (adapter
->flags
& IGB_FLAG_HAS_MSI
)
1054 pci_disable_msi(adapter
->pdev
);
1057 igb_reset_q_vector(adapter
, v_idx
);
1061 * igb_free_q_vectors - Free memory allocated for interrupt vectors
1062 * @adapter: board private structure to initialize
1064 * This function frees the memory allocated to the q_vectors. In addition if
1065 * NAPI is enabled it will delete any references to the NAPI struct prior
1066 * to freeing the q_vector.
1068 static void igb_free_q_vectors(struct igb_adapter
*adapter
)
1070 int v_idx
= adapter
->num_q_vectors
;
1072 adapter
->num_tx_queues
= 0;
1073 adapter
->num_rx_queues
= 0;
1074 adapter
->num_q_vectors
= 0;
1077 igb_reset_q_vector(adapter
, v_idx
);
1078 igb_free_q_vector(adapter
, v_idx
);
1083 * igb_clear_interrupt_scheme - reset the device to a state of no interrupts
1084 * @adapter: board private structure to initialize
1086 * This function resets the device so that it has 0 Rx queues, Tx queues, and
1087 * MSI-X interrupts allocated.
1089 static void igb_clear_interrupt_scheme(struct igb_adapter
*adapter
)
1091 igb_free_q_vectors(adapter
);
1092 igb_reset_interrupt_capability(adapter
);
1096 * igb_set_interrupt_capability - set MSI or MSI-X if supported
1097 * @adapter: board private structure to initialize
1098 * @msix: boolean value of MSIX capability
1100 * Attempt to configure interrupts using the best available
1101 * capabilities of the hardware and kernel.
1103 static void igb_set_interrupt_capability(struct igb_adapter
*adapter
, bool msix
)
1110 adapter
->flags
|= IGB_FLAG_HAS_MSIX
;
1112 /* Number of supported queues. */
1113 adapter
->num_rx_queues
= adapter
->rss_queues
;
1114 if (adapter
->vfs_allocated_count
)
1115 adapter
->num_tx_queues
= 1;
1117 adapter
->num_tx_queues
= adapter
->rss_queues
;
1119 /* start with one vector for every Rx queue */
1120 numvecs
= adapter
->num_rx_queues
;
1122 /* if Tx handler is separate add 1 for every Tx queue */
1123 if (!(adapter
->flags
& IGB_FLAG_QUEUE_PAIRS
))
1124 numvecs
+= adapter
->num_tx_queues
;
1126 /* store the number of vectors reserved for queues */
1127 adapter
->num_q_vectors
= numvecs
;
1129 /* add 1 vector for link status interrupts */
1131 for (i
= 0; i
< numvecs
; i
++)
1132 adapter
->msix_entries
[i
].entry
= i
;
1134 err
= pci_enable_msix_range(adapter
->pdev
,
1135 adapter
->msix_entries
,
1141 igb_reset_interrupt_capability(adapter
);
1143 /* If we can't do MSI-X, try MSI */
1145 adapter
->flags
&= ~IGB_FLAG_HAS_MSIX
;
1146 #ifdef CONFIG_PCI_IOV
1147 /* disable SR-IOV for non MSI-X configurations */
1148 if (adapter
->vf_data
) {
1149 struct e1000_hw
*hw
= &adapter
->hw
;
1150 /* disable iov and allow time for transactions to clear */
1151 pci_disable_sriov(adapter
->pdev
);
1154 kfree(adapter
->vf_data
);
1155 adapter
->vf_data
= NULL
;
1156 wr32(E1000_IOVCTL
, E1000_IOVCTL_REUSE_VFQ
);
1159 dev_info(&adapter
->pdev
->dev
, "IOV Disabled\n");
1162 adapter
->vfs_allocated_count
= 0;
1163 adapter
->rss_queues
= 1;
1164 adapter
->flags
|= IGB_FLAG_QUEUE_PAIRS
;
1165 adapter
->num_rx_queues
= 1;
1166 adapter
->num_tx_queues
= 1;
1167 adapter
->num_q_vectors
= 1;
1168 if (!pci_enable_msi(adapter
->pdev
))
1169 adapter
->flags
|= IGB_FLAG_HAS_MSI
;
1172 static void igb_add_ring(struct igb_ring
*ring
,
1173 struct igb_ring_container
*head
)
1180 * igb_alloc_q_vector - Allocate memory for a single interrupt vector
1181 * @adapter: board private structure to initialize
1182 * @v_count: q_vectors allocated on adapter, used for ring interleaving
1183 * @v_idx: index of vector in adapter struct
1184 * @txr_count: total number of Tx rings to allocate
1185 * @txr_idx: index of first Tx ring to allocate
1186 * @rxr_count: total number of Rx rings to allocate
1187 * @rxr_idx: index of first Rx ring to allocate
1189 * We allocate one q_vector. If allocation fails we return -ENOMEM.
1191 static int igb_alloc_q_vector(struct igb_adapter
*adapter
,
1192 int v_count
, int v_idx
,
1193 int txr_count
, int txr_idx
,
1194 int rxr_count
, int rxr_idx
)
1196 struct igb_q_vector
*q_vector
;
1197 struct igb_ring
*ring
;
1198 int ring_count
, size
;
1200 /* igb only supports 1 Tx and/or 1 Rx queue per vector */
1201 if (txr_count
> 1 || rxr_count
> 1)
1204 ring_count
= txr_count
+ rxr_count
;
1205 size
= sizeof(struct igb_q_vector
) +
1206 (sizeof(struct igb_ring
) * ring_count
);
1208 /* allocate q_vector and rings */
1209 q_vector
= adapter
->q_vector
[v_idx
];
1211 q_vector
= kzalloc(size
, GFP_KERNEL
);
1212 } else if (size
> ksize(q_vector
)) {
1213 kfree_rcu(q_vector
, rcu
);
1214 q_vector
= kzalloc(size
, GFP_KERNEL
);
1216 memset(q_vector
, 0, size
);
1221 /* initialize NAPI */
1222 netif_napi_add(adapter
->netdev
, &q_vector
->napi
,
1225 /* tie q_vector and adapter together */
1226 adapter
->q_vector
[v_idx
] = q_vector
;
1227 q_vector
->adapter
= adapter
;
1229 /* initialize work limits */
1230 q_vector
->tx
.work_limit
= adapter
->tx_work_limit
;
1232 /* initialize ITR configuration */
1233 q_vector
->itr_register
= adapter
->io_addr
+ E1000_EITR(0);
1234 q_vector
->itr_val
= IGB_START_ITR
;
1236 /* initialize pointer to rings */
1237 ring
= q_vector
->ring
;
1241 /* rx or rx/tx vector */
1242 if (!adapter
->rx_itr_setting
|| adapter
->rx_itr_setting
> 3)
1243 q_vector
->itr_val
= adapter
->rx_itr_setting
;
1245 /* tx only vector */
1246 if (!adapter
->tx_itr_setting
|| adapter
->tx_itr_setting
> 3)
1247 q_vector
->itr_val
= adapter
->tx_itr_setting
;
1251 /* assign generic ring traits */
1252 ring
->dev
= &adapter
->pdev
->dev
;
1253 ring
->netdev
= adapter
->netdev
;
1255 /* configure backlink on ring */
1256 ring
->q_vector
= q_vector
;
1258 /* update q_vector Tx values */
1259 igb_add_ring(ring
, &q_vector
->tx
);
1261 /* For 82575, context index must be unique per ring. */
1262 if (adapter
->hw
.mac
.type
== e1000_82575
)
1263 set_bit(IGB_RING_FLAG_TX_CTX_IDX
, &ring
->flags
);
1265 /* apply Tx specific ring traits */
1266 ring
->count
= adapter
->tx_ring_count
;
1267 ring
->queue_index
= txr_idx
;
1269 u64_stats_init(&ring
->tx_syncp
);
1270 u64_stats_init(&ring
->tx_syncp2
);
1272 /* assign ring to adapter */
1273 adapter
->tx_ring
[txr_idx
] = ring
;
1275 /* push pointer to next ring */
1280 /* assign generic ring traits */
1281 ring
->dev
= &adapter
->pdev
->dev
;
1282 ring
->netdev
= adapter
->netdev
;
1284 /* configure backlink on ring */
1285 ring
->q_vector
= q_vector
;
1287 /* update q_vector Rx values */
1288 igb_add_ring(ring
, &q_vector
->rx
);
1290 /* set flag indicating ring supports SCTP checksum offload */
1291 if (adapter
->hw
.mac
.type
>= e1000_82576
)
1292 set_bit(IGB_RING_FLAG_RX_SCTP_CSUM
, &ring
->flags
);
1294 /* On i350, i354, i210, and i211, loopback VLAN packets
1295 * have the tag byte-swapped.
1297 if (adapter
->hw
.mac
.type
>= e1000_i350
)
1298 set_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP
, &ring
->flags
);
1300 /* apply Rx specific ring traits */
1301 ring
->count
= adapter
->rx_ring_count
;
1302 ring
->queue_index
= rxr_idx
;
1304 u64_stats_init(&ring
->rx_syncp
);
1306 /* assign ring to adapter */
1307 adapter
->rx_ring
[rxr_idx
] = ring
;
1315 * igb_alloc_q_vectors - Allocate memory for interrupt vectors
1316 * @adapter: board private structure to initialize
1318 * We allocate one q_vector per queue interrupt. If allocation fails we
1321 static int igb_alloc_q_vectors(struct igb_adapter
*adapter
)
1323 int q_vectors
= adapter
->num_q_vectors
;
1324 int rxr_remaining
= adapter
->num_rx_queues
;
1325 int txr_remaining
= adapter
->num_tx_queues
;
1326 int rxr_idx
= 0, txr_idx
= 0, v_idx
= 0;
1329 if (q_vectors
>= (rxr_remaining
+ txr_remaining
)) {
1330 for (; rxr_remaining
; v_idx
++) {
1331 err
= igb_alloc_q_vector(adapter
, q_vectors
, v_idx
,
1337 /* update counts and index */
1343 for (; v_idx
< q_vectors
; v_idx
++) {
1344 int rqpv
= DIV_ROUND_UP(rxr_remaining
, q_vectors
- v_idx
);
1345 int tqpv
= DIV_ROUND_UP(txr_remaining
, q_vectors
- v_idx
);
1347 err
= igb_alloc_q_vector(adapter
, q_vectors
, v_idx
,
1348 tqpv
, txr_idx
, rqpv
, rxr_idx
);
1353 /* update counts and index */
1354 rxr_remaining
-= rqpv
;
1355 txr_remaining
-= tqpv
;
1363 adapter
->num_tx_queues
= 0;
1364 adapter
->num_rx_queues
= 0;
1365 adapter
->num_q_vectors
= 0;
1368 igb_free_q_vector(adapter
, v_idx
);
1374 * igb_init_interrupt_scheme - initialize interrupts, allocate queues/vectors
1375 * @adapter: board private structure to initialize
1376 * @msix: boolean value of MSIX capability
1378 * This function initializes the interrupts and allocates all of the queues.
1380 static int igb_init_interrupt_scheme(struct igb_adapter
*adapter
, bool msix
)
1382 struct pci_dev
*pdev
= adapter
->pdev
;
1385 igb_set_interrupt_capability(adapter
, msix
);
1387 err
= igb_alloc_q_vectors(adapter
);
1389 dev_err(&pdev
->dev
, "Unable to allocate memory for vectors\n");
1390 goto err_alloc_q_vectors
;
1393 igb_cache_ring_register(adapter
);
1397 err_alloc_q_vectors
:
1398 igb_reset_interrupt_capability(adapter
);
1403 * igb_request_irq - initialize interrupts
1404 * @adapter: board private structure to initialize
1406 * Attempts to configure interrupts using the best available
1407 * capabilities of the hardware and kernel.
1409 static int igb_request_irq(struct igb_adapter
*adapter
)
1411 struct net_device
*netdev
= adapter
->netdev
;
1412 struct pci_dev
*pdev
= adapter
->pdev
;
1415 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
) {
1416 err
= igb_request_msix(adapter
);
1419 /* fall back to MSI */
1420 igb_free_all_tx_resources(adapter
);
1421 igb_free_all_rx_resources(adapter
);
1423 igb_clear_interrupt_scheme(adapter
);
1424 err
= igb_init_interrupt_scheme(adapter
, false);
1428 igb_setup_all_tx_resources(adapter
);
1429 igb_setup_all_rx_resources(adapter
);
1430 igb_configure(adapter
);
1433 igb_assign_vector(adapter
->q_vector
[0], 0);
1435 if (adapter
->flags
& IGB_FLAG_HAS_MSI
) {
1436 err
= request_irq(pdev
->irq
, igb_intr_msi
, 0,
1437 netdev
->name
, adapter
);
1441 /* fall back to legacy interrupts */
1442 igb_reset_interrupt_capability(adapter
);
1443 adapter
->flags
&= ~IGB_FLAG_HAS_MSI
;
1446 err
= request_irq(pdev
->irq
, igb_intr
, IRQF_SHARED
,
1447 netdev
->name
, adapter
);
1450 dev_err(&pdev
->dev
, "Error %d getting interrupt\n",
1457 static void igb_free_irq(struct igb_adapter
*adapter
)
1459 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
) {
1462 free_irq(adapter
->msix_entries
[vector
++].vector
, adapter
);
1464 for (i
= 0; i
< adapter
->num_q_vectors
; i
++)
1465 free_irq(adapter
->msix_entries
[vector
++].vector
,
1466 adapter
->q_vector
[i
]);
1468 free_irq(adapter
->pdev
->irq
, adapter
);
1473 * igb_irq_disable - Mask off interrupt generation on the NIC
1474 * @adapter: board private structure
1476 static void igb_irq_disable(struct igb_adapter
*adapter
)
1478 struct e1000_hw
*hw
= &adapter
->hw
;
1480 /* we need to be careful when disabling interrupts. The VFs are also
1481 * mapped into these registers and so clearing the bits can cause
1482 * issues on the VF drivers so we only need to clear what we set
1484 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
) {
1485 u32 regval
= rd32(E1000_EIAM
);
1487 wr32(E1000_EIAM
, regval
& ~adapter
->eims_enable_mask
);
1488 wr32(E1000_EIMC
, adapter
->eims_enable_mask
);
1489 regval
= rd32(E1000_EIAC
);
1490 wr32(E1000_EIAC
, regval
& ~adapter
->eims_enable_mask
);
1494 wr32(E1000_IMC
, ~0);
1496 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
) {
1499 for (i
= 0; i
< adapter
->num_q_vectors
; i
++)
1500 synchronize_irq(adapter
->msix_entries
[i
].vector
);
1502 synchronize_irq(adapter
->pdev
->irq
);
1507 * igb_irq_enable - Enable default interrupt generation settings
1508 * @adapter: board private structure
1510 static void igb_irq_enable(struct igb_adapter
*adapter
)
1512 struct e1000_hw
*hw
= &adapter
->hw
;
1514 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
) {
1515 u32 ims
= E1000_IMS_LSC
| E1000_IMS_DOUTSYNC
| E1000_IMS_DRSTA
;
1516 u32 regval
= rd32(E1000_EIAC
);
1518 wr32(E1000_EIAC
, regval
| adapter
->eims_enable_mask
);
1519 regval
= rd32(E1000_EIAM
);
1520 wr32(E1000_EIAM
, regval
| adapter
->eims_enable_mask
);
1521 wr32(E1000_EIMS
, adapter
->eims_enable_mask
);
1522 if (adapter
->vfs_allocated_count
) {
1523 wr32(E1000_MBVFIMR
, 0xFF);
1524 ims
|= E1000_IMS_VMMB
;
1526 wr32(E1000_IMS
, ims
);
1528 wr32(E1000_IMS
, IMS_ENABLE_MASK
|
1530 wr32(E1000_IAM
, IMS_ENABLE_MASK
|
1535 static void igb_update_mng_vlan(struct igb_adapter
*adapter
)
1537 struct e1000_hw
*hw
= &adapter
->hw
;
1538 u16 pf_id
= adapter
->vfs_allocated_count
;
1539 u16 vid
= adapter
->hw
.mng_cookie
.vlan_id
;
1540 u16 old_vid
= adapter
->mng_vlan_id
;
1542 if (hw
->mng_cookie
.status
& E1000_MNG_DHCP_COOKIE_STATUS_VLAN
) {
1543 /* add VID to filter table */
1544 igb_vfta_set(hw
, vid
, pf_id
, true, true);
1545 adapter
->mng_vlan_id
= vid
;
1547 adapter
->mng_vlan_id
= IGB_MNG_VLAN_NONE
;
1550 if ((old_vid
!= (u16
)IGB_MNG_VLAN_NONE
) &&
1552 !test_bit(old_vid
, adapter
->active_vlans
)) {
1553 /* remove VID from filter table */
1554 igb_vfta_set(hw
, vid
, pf_id
, false, true);
1559 * igb_release_hw_control - release control of the h/w to f/w
1560 * @adapter: address of board private structure
1562 * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit.
1563 * For ASF and Pass Through versions of f/w this means that the
1564 * driver is no longer loaded.
1566 static void igb_release_hw_control(struct igb_adapter
*adapter
)
1568 struct e1000_hw
*hw
= &adapter
->hw
;
1571 /* Let firmware take over control of h/w */
1572 ctrl_ext
= rd32(E1000_CTRL_EXT
);
1573 wr32(E1000_CTRL_EXT
,
1574 ctrl_ext
& ~E1000_CTRL_EXT_DRV_LOAD
);
1578 * igb_get_hw_control - get control of the h/w from f/w
1579 * @adapter: address of board private structure
1581 * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
1582 * For ASF and Pass Through versions of f/w this means that
1583 * the driver is loaded.
1585 static void igb_get_hw_control(struct igb_adapter
*adapter
)
1587 struct e1000_hw
*hw
= &adapter
->hw
;
1590 /* Let firmware know the driver has taken over */
1591 ctrl_ext
= rd32(E1000_CTRL_EXT
);
1592 wr32(E1000_CTRL_EXT
,
1593 ctrl_ext
| E1000_CTRL_EXT_DRV_LOAD
);
1597 * igb_configure - configure the hardware for RX and TX
1598 * @adapter: private board structure
1600 static void igb_configure(struct igb_adapter
*adapter
)
1602 struct net_device
*netdev
= adapter
->netdev
;
1605 igb_get_hw_control(adapter
);
1606 igb_set_rx_mode(netdev
);
1608 igb_restore_vlan(adapter
);
1610 igb_setup_tctl(adapter
);
1611 igb_setup_mrqc(adapter
);
1612 igb_setup_rctl(adapter
);
1614 igb_configure_tx(adapter
);
1615 igb_configure_rx(adapter
);
1617 igb_rx_fifo_flush_82575(&adapter
->hw
);
1619 /* call igb_desc_unused which always leaves
1620 * at least 1 descriptor unused to make sure
1621 * next_to_use != next_to_clean
1623 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
1624 struct igb_ring
*ring
= adapter
->rx_ring
[i
];
1625 igb_alloc_rx_buffers(ring
, igb_desc_unused(ring
));
1630 * igb_power_up_link - Power up the phy/serdes link
1631 * @adapter: address of board private structure
1633 void igb_power_up_link(struct igb_adapter
*adapter
)
1635 igb_reset_phy(&adapter
->hw
);
1637 if (adapter
->hw
.phy
.media_type
== e1000_media_type_copper
)
1638 igb_power_up_phy_copper(&adapter
->hw
);
1640 igb_power_up_serdes_link_82575(&adapter
->hw
);
1642 igb_setup_link(&adapter
->hw
);
1646 * igb_power_down_link - Power down the phy/serdes link
1647 * @adapter: address of board private structure
1649 static void igb_power_down_link(struct igb_adapter
*adapter
)
1651 if (adapter
->hw
.phy
.media_type
== e1000_media_type_copper
)
1652 igb_power_down_phy_copper_82575(&adapter
->hw
);
1654 igb_shutdown_serdes_link_82575(&adapter
->hw
);
1658 * Detect and switch function for Media Auto Sense
1659 * @adapter: address of the board private structure
1661 static void igb_check_swap_media(struct igb_adapter
*adapter
)
1663 struct e1000_hw
*hw
= &adapter
->hw
;
1664 u32 ctrl_ext
, connsw
;
1665 bool swap_now
= false;
1667 ctrl_ext
= rd32(E1000_CTRL_EXT
);
1668 connsw
= rd32(E1000_CONNSW
);
1670 /* need to live swap if current media is copper and we have fiber/serdes
1674 if ((hw
->phy
.media_type
== e1000_media_type_copper
) &&
1675 (!(connsw
& E1000_CONNSW_AUTOSENSE_EN
))) {
1677 } else if (!(connsw
& E1000_CONNSW_SERDESD
)) {
1678 /* copper signal takes time to appear */
1679 if (adapter
->copper_tries
< 4) {
1680 adapter
->copper_tries
++;
1681 connsw
|= E1000_CONNSW_AUTOSENSE_CONF
;
1682 wr32(E1000_CONNSW
, connsw
);
1685 adapter
->copper_tries
= 0;
1686 if ((connsw
& E1000_CONNSW_PHYSD
) &&
1687 (!(connsw
& E1000_CONNSW_PHY_PDN
))) {
1689 connsw
&= ~E1000_CONNSW_AUTOSENSE_CONF
;
1690 wr32(E1000_CONNSW
, connsw
);
1698 switch (hw
->phy
.media_type
) {
1699 case e1000_media_type_copper
:
1700 netdev_info(adapter
->netdev
,
1701 "MAS: changing media to fiber/serdes\n");
1703 E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES
;
1704 adapter
->flags
|= IGB_FLAG_MEDIA_RESET
;
1705 adapter
->copper_tries
= 0;
1707 case e1000_media_type_internal_serdes
:
1708 case e1000_media_type_fiber
:
1709 netdev_info(adapter
->netdev
,
1710 "MAS: changing media to copper\n");
1712 ~E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES
;
1713 adapter
->flags
|= IGB_FLAG_MEDIA_RESET
;
1716 /* shouldn't get here during regular operation */
1717 netdev_err(adapter
->netdev
,
1718 "AMS: Invalid media type found, returning\n");
1721 wr32(E1000_CTRL_EXT
, ctrl_ext
);
1725 * igb_up - Open the interface and prepare it to handle traffic
1726 * @adapter: board private structure
1728 int igb_up(struct igb_adapter
*adapter
)
1730 struct e1000_hw
*hw
= &adapter
->hw
;
1733 /* hardware has been reset, we need to reload some things */
1734 igb_configure(adapter
);
1736 clear_bit(__IGB_DOWN
, &adapter
->state
);
1738 for (i
= 0; i
< adapter
->num_q_vectors
; i
++)
1739 napi_enable(&(adapter
->q_vector
[i
]->napi
));
1741 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
)
1742 igb_configure_msix(adapter
);
1744 igb_assign_vector(adapter
->q_vector
[0], 0);
1746 /* Clear any pending interrupts. */
1748 igb_irq_enable(adapter
);
1750 /* notify VFs that reset has been completed */
1751 if (adapter
->vfs_allocated_count
) {
1752 u32 reg_data
= rd32(E1000_CTRL_EXT
);
1754 reg_data
|= E1000_CTRL_EXT_PFRSTD
;
1755 wr32(E1000_CTRL_EXT
, reg_data
);
1758 netif_tx_start_all_queues(adapter
->netdev
);
1760 /* start the watchdog. */
1761 hw
->mac
.get_link_status
= 1;
1762 schedule_work(&adapter
->watchdog_task
);
1764 if ((adapter
->flags
& IGB_FLAG_EEE
) &&
1765 (!hw
->dev_spec
._82575
.eee_disable
))
1766 adapter
->eee_advert
= MDIO_EEE_100TX
| MDIO_EEE_1000T
;
1771 void igb_down(struct igb_adapter
*adapter
)
1773 struct net_device
*netdev
= adapter
->netdev
;
1774 struct e1000_hw
*hw
= &adapter
->hw
;
1778 /* signal that we're down so the interrupt handler does not
1779 * reschedule our watchdog timer
1781 set_bit(__IGB_DOWN
, &adapter
->state
);
1783 /* disable receives in the hardware */
1784 rctl
= rd32(E1000_RCTL
);
1785 wr32(E1000_RCTL
, rctl
& ~E1000_RCTL_EN
);
1786 /* flush and sleep below */
1788 netif_carrier_off(netdev
);
1789 netif_tx_stop_all_queues(netdev
);
1791 /* disable transmits in the hardware */
1792 tctl
= rd32(E1000_TCTL
);
1793 tctl
&= ~E1000_TCTL_EN
;
1794 wr32(E1000_TCTL
, tctl
);
1795 /* flush both disables and wait for them to finish */
1797 usleep_range(10000, 11000);
1799 igb_irq_disable(adapter
);
1801 adapter
->flags
&= ~IGB_FLAG_NEED_LINK_UPDATE
;
1803 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
1804 if (adapter
->q_vector
[i
]) {
1805 napi_synchronize(&adapter
->q_vector
[i
]->napi
);
1806 napi_disable(&adapter
->q_vector
[i
]->napi
);
1810 del_timer_sync(&adapter
->watchdog_timer
);
1811 del_timer_sync(&adapter
->phy_info_timer
);
1813 /* record the stats before reset*/
1814 spin_lock(&adapter
->stats64_lock
);
1815 igb_update_stats(adapter
, &adapter
->stats64
);
1816 spin_unlock(&adapter
->stats64_lock
);
1818 adapter
->link_speed
= 0;
1819 adapter
->link_duplex
= 0;
1821 if (!pci_channel_offline(adapter
->pdev
))
1824 /* clear VLAN promisc flag so VFTA will be updated if necessary */
1825 adapter
->flags
&= ~IGB_FLAG_VLAN_PROMISC
;
1827 igb_clean_all_tx_rings(adapter
);
1828 igb_clean_all_rx_rings(adapter
);
1829 #ifdef CONFIG_IGB_DCA
1831 /* since we reset the hardware DCA settings were cleared */
1832 igb_setup_dca(adapter
);
1836 void igb_reinit_locked(struct igb_adapter
*adapter
)
1838 WARN_ON(in_interrupt());
1839 while (test_and_set_bit(__IGB_RESETTING
, &adapter
->state
))
1840 usleep_range(1000, 2000);
1843 clear_bit(__IGB_RESETTING
, &adapter
->state
);
1846 /** igb_enable_mas - Media Autosense re-enable after swap
1848 * @adapter: adapter struct
1850 static void igb_enable_mas(struct igb_adapter
*adapter
)
1852 struct e1000_hw
*hw
= &adapter
->hw
;
1853 u32 connsw
= rd32(E1000_CONNSW
);
1855 /* configure for SerDes media detect */
1856 if ((hw
->phy
.media_type
== e1000_media_type_copper
) &&
1857 (!(connsw
& E1000_CONNSW_SERDESD
))) {
1858 connsw
|= E1000_CONNSW_ENRGSRC
;
1859 connsw
|= E1000_CONNSW_AUTOSENSE_EN
;
1860 wr32(E1000_CONNSW
, connsw
);
1865 void igb_reset(struct igb_adapter
*adapter
)
1867 struct pci_dev
*pdev
= adapter
->pdev
;
1868 struct e1000_hw
*hw
= &adapter
->hw
;
1869 struct e1000_mac_info
*mac
= &hw
->mac
;
1870 struct e1000_fc_info
*fc
= &hw
->fc
;
1873 /* Repartition Pba for greater than 9k mtu
1874 * To take effect CTRL.RST is required.
1876 switch (mac
->type
) {
1880 pba
= rd32(E1000_RXPBS
);
1881 pba
= igb_rxpbs_adjust_82580(pba
);
1884 pba
= rd32(E1000_RXPBS
);
1885 pba
&= E1000_RXPBS_SIZE_MASK_82576
;
1891 pba
= E1000_PBA_34K
;
1895 if (mac
->type
== e1000_82575
) {
1896 u32 min_rx_space
, min_tx_space
, needed_tx_space
;
1898 /* write Rx PBA so that hardware can report correct Tx PBA */
1899 wr32(E1000_PBA
, pba
);
1901 /* To maintain wire speed transmits, the Tx FIFO should be
1902 * large enough to accommodate two full transmit packets,
1903 * rounded up to the next 1KB and expressed in KB. Likewise,
1904 * the Rx FIFO should be large enough to accommodate at least
1905 * one full receive packet and is similarly rounded up and
1908 min_rx_space
= DIV_ROUND_UP(MAX_JUMBO_FRAME_SIZE
, 1024);
1910 /* The Tx FIFO also stores 16 bytes of information about the Tx
1911 * but don't include Ethernet FCS because hardware appends it.
1912 * We only need to round down to the nearest 512 byte block
1913 * count since the value we care about is 2 frames, not 1.
1915 min_tx_space
= adapter
->max_frame_size
;
1916 min_tx_space
+= sizeof(union e1000_adv_tx_desc
) - ETH_FCS_LEN
;
1917 min_tx_space
= DIV_ROUND_UP(min_tx_space
, 512);
1919 /* upper 16 bits has Tx packet buffer allocation size in KB */
1920 needed_tx_space
= min_tx_space
- (rd32(E1000_PBA
) >> 16);
1922 /* If current Tx allocation is less than the min Tx FIFO size,
1923 * and the min Tx FIFO size is less than the current Rx FIFO
1924 * allocation, take space away from current Rx allocation.
1926 if (needed_tx_space
< pba
) {
1927 pba
-= needed_tx_space
;
1929 /* if short on Rx space, Rx wins and must trump Tx
1932 if (pba
< min_rx_space
)
1936 /* adjust PBA for jumbo frames */
1937 wr32(E1000_PBA
, pba
);
1940 /* flow control settings
1941 * The high water mark must be low enough to fit one full frame
1942 * after transmitting the pause frame. As such we must have enough
1943 * space to allow for us to complete our current transmit and then
1944 * receive the frame that is in progress from the link partner.
1946 * - the full Rx FIFO size minus one full Tx plus one full Rx frame
1948 hwm
= (pba
<< 10) - (adapter
->max_frame_size
+ MAX_JUMBO_FRAME_SIZE
);
1950 fc
->high_water
= hwm
& 0xFFFFFFF0; /* 16-byte granularity */
1951 fc
->low_water
= fc
->high_water
- 16;
1952 fc
->pause_time
= 0xFFFF;
1954 fc
->current_mode
= fc
->requested_mode
;
1956 /* disable receive for all VFs and wait one second */
1957 if (adapter
->vfs_allocated_count
) {
1960 for (i
= 0 ; i
< adapter
->vfs_allocated_count
; i
++)
1961 adapter
->vf_data
[i
].flags
&= IGB_VF_FLAG_PF_SET_MAC
;
1963 /* ping all the active vfs to let them know we are going down */
1964 igb_ping_all_vfs(adapter
);
1966 /* disable transmits and receives */
1967 wr32(E1000_VFRE
, 0);
1968 wr32(E1000_VFTE
, 0);
1971 /* Allow time for pending master requests to run */
1972 hw
->mac
.ops
.reset_hw(hw
);
1975 if (adapter
->flags
& IGB_FLAG_MEDIA_RESET
) {
1976 /* need to resetup here after media swap */
1977 adapter
->ei
.get_invariants(hw
);
1978 adapter
->flags
&= ~IGB_FLAG_MEDIA_RESET
;
1980 if ((mac
->type
== e1000_82575
) &&
1981 (adapter
->flags
& IGB_FLAG_MAS_ENABLE
)) {
1982 igb_enable_mas(adapter
);
1984 if (hw
->mac
.ops
.init_hw(hw
))
1985 dev_err(&pdev
->dev
, "Hardware Error\n");
1987 /* Flow control settings reset on hardware reset, so guarantee flow
1988 * control is off when forcing speed.
1990 if (!hw
->mac
.autoneg
)
1991 igb_force_mac_fc(hw
);
1993 igb_init_dmac(adapter
, pba
);
1994 #ifdef CONFIG_IGB_HWMON
1995 /* Re-initialize the thermal sensor on i350 devices. */
1996 if (!test_bit(__IGB_DOWN
, &adapter
->state
)) {
1997 if (mac
->type
== e1000_i350
&& hw
->bus
.func
== 0) {
1998 /* If present, re-initialize the external thermal sensor
2002 mac
->ops
.init_thermal_sensor_thresh(hw
);
2006 /* Re-establish EEE setting */
2007 if (hw
->phy
.media_type
== e1000_media_type_copper
) {
2008 switch (mac
->type
) {
2012 igb_set_eee_i350(hw
, true, true);
2015 igb_set_eee_i354(hw
, true, true);
2021 if (!netif_running(adapter
->netdev
))
2022 igb_power_down_link(adapter
);
2024 igb_update_mng_vlan(adapter
);
2026 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
2027 wr32(E1000_VET
, ETHERNET_IEEE_VLAN_TYPE
);
2029 /* Re-enable PTP, where applicable. */
2030 igb_ptp_reset(adapter
);
2032 igb_get_phy_info(hw
);
2035 static netdev_features_t
igb_fix_features(struct net_device
*netdev
,
2036 netdev_features_t features
)
2038 /* Since there is no support for separate Rx/Tx vlan accel
2039 * enable/disable make sure Tx flag is always in same state as Rx.
2041 if (features
& NETIF_F_HW_VLAN_CTAG_RX
)
2042 features
|= NETIF_F_HW_VLAN_CTAG_TX
;
2044 features
&= ~NETIF_F_HW_VLAN_CTAG_TX
;
2049 static int igb_set_features(struct net_device
*netdev
,
2050 netdev_features_t features
)
2052 netdev_features_t changed
= netdev
->features
^ features
;
2053 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2055 if (changed
& NETIF_F_HW_VLAN_CTAG_RX
)
2056 igb_vlan_mode(netdev
, features
);
2058 if (!(changed
& (NETIF_F_RXALL
| NETIF_F_NTUPLE
)))
2061 netdev
->features
= features
;
2063 if (netif_running(netdev
))
2064 igb_reinit_locked(adapter
);
2071 static int igb_ndo_fdb_add(struct ndmsg
*ndm
, struct nlattr
*tb
[],
2072 struct net_device
*dev
,
2073 const unsigned char *addr
, u16 vid
,
2076 /* guarantee we can provide a unique filter for the unicast address */
2077 if (is_unicast_ether_addr(addr
) || is_link_local_ether_addr(addr
)) {
2078 struct igb_adapter
*adapter
= netdev_priv(dev
);
2079 struct e1000_hw
*hw
= &adapter
->hw
;
2080 int vfn
= adapter
->vfs_allocated_count
;
2081 int rar_entries
= hw
->mac
.rar_entry_count
- (vfn
+ 1);
2083 if (netdev_uc_count(dev
) >= rar_entries
)
2087 return ndo_dflt_fdb_add(ndm
, tb
, dev
, addr
, vid
, flags
);
2090 #define IGB_MAX_MAC_HDR_LEN 127
2091 #define IGB_MAX_NETWORK_HDR_LEN 511
2093 static netdev_features_t
2094 igb_features_check(struct sk_buff
*skb
, struct net_device
*dev
,
2095 netdev_features_t features
)
2097 unsigned int network_hdr_len
, mac_hdr_len
;
2099 /* Make certain the headers can be described by a context descriptor */
2100 mac_hdr_len
= skb_network_header(skb
) - skb
->data
;
2101 if (unlikely(mac_hdr_len
> IGB_MAX_MAC_HDR_LEN
))
2102 return features
& ~(NETIF_F_HW_CSUM
|
2104 NETIF_F_HW_VLAN_CTAG_TX
|
2108 network_hdr_len
= skb_checksum_start(skb
) - skb_network_header(skb
);
2109 if (unlikely(network_hdr_len
> IGB_MAX_NETWORK_HDR_LEN
))
2110 return features
& ~(NETIF_F_HW_CSUM
|
2115 /* We can only support IPV4 TSO in tunnels if we can mangle the
2116 * inner IP ID field, so strip TSO if MANGLEID is not supported.
2118 if (skb
->encapsulation
&& !(features
& NETIF_F_TSO_MANGLEID
))
2119 features
&= ~NETIF_F_TSO
;
2124 static const struct net_device_ops igb_netdev_ops
= {
2125 .ndo_open
= igb_open
,
2126 .ndo_stop
= igb_close
,
2127 .ndo_start_xmit
= igb_xmit_frame
,
2128 .ndo_get_stats64
= igb_get_stats64
,
2129 .ndo_set_rx_mode
= igb_set_rx_mode
,
2130 .ndo_set_mac_address
= igb_set_mac
,
2131 .ndo_change_mtu
= igb_change_mtu
,
2132 .ndo_do_ioctl
= igb_ioctl
,
2133 .ndo_tx_timeout
= igb_tx_timeout
,
2134 .ndo_validate_addr
= eth_validate_addr
,
2135 .ndo_vlan_rx_add_vid
= igb_vlan_rx_add_vid
,
2136 .ndo_vlan_rx_kill_vid
= igb_vlan_rx_kill_vid
,
2137 .ndo_set_vf_mac
= igb_ndo_set_vf_mac
,
2138 .ndo_set_vf_vlan
= igb_ndo_set_vf_vlan
,
2139 .ndo_set_vf_rate
= igb_ndo_set_vf_bw
,
2140 .ndo_set_vf_spoofchk
= igb_ndo_set_vf_spoofchk
,
2141 .ndo_get_vf_config
= igb_ndo_get_vf_config
,
2142 #ifdef CONFIG_NET_POLL_CONTROLLER
2143 .ndo_poll_controller
= igb_netpoll
,
2145 .ndo_fix_features
= igb_fix_features
,
2146 .ndo_set_features
= igb_set_features
,
2147 .ndo_fdb_add
= igb_ndo_fdb_add
,
2148 .ndo_features_check
= igb_features_check
,
2152 * igb_set_fw_version - Configure version string for ethtool
2153 * @adapter: adapter struct
2155 void igb_set_fw_version(struct igb_adapter
*adapter
)
2157 struct e1000_hw
*hw
= &adapter
->hw
;
2158 struct e1000_fw_version fw
;
2160 igb_get_fw_version(hw
, &fw
);
2162 switch (hw
->mac
.type
) {
2165 if (!(igb_get_flash_presence_i210(hw
))) {
2166 snprintf(adapter
->fw_version
,
2167 sizeof(adapter
->fw_version
),
2169 fw
.invm_major
, fw
.invm_minor
,
2175 /* if option is rom valid, display its version too */
2177 snprintf(adapter
->fw_version
,
2178 sizeof(adapter
->fw_version
),
2179 "%d.%d, 0x%08x, %d.%d.%d",
2180 fw
.eep_major
, fw
.eep_minor
, fw
.etrack_id
,
2181 fw
.or_major
, fw
.or_build
, fw
.or_patch
);
2183 } else if (fw
.etrack_id
!= 0X0000) {
2184 snprintf(adapter
->fw_version
,
2185 sizeof(adapter
->fw_version
),
2187 fw
.eep_major
, fw
.eep_minor
, fw
.etrack_id
);
2189 snprintf(adapter
->fw_version
,
2190 sizeof(adapter
->fw_version
),
2192 fw
.eep_major
, fw
.eep_minor
, fw
.eep_build
);
2199 * igb_init_mas - init Media Autosense feature if enabled in the NVM
2201 * @adapter: adapter struct
2203 static void igb_init_mas(struct igb_adapter
*adapter
)
2205 struct e1000_hw
*hw
= &adapter
->hw
;
2208 hw
->nvm
.ops
.read(hw
, NVM_COMPAT
, 1, &eeprom_data
);
2209 switch (hw
->bus
.func
) {
2211 if (eeprom_data
& IGB_MAS_ENABLE_0
) {
2212 adapter
->flags
|= IGB_FLAG_MAS_ENABLE
;
2213 netdev_info(adapter
->netdev
,
2214 "MAS: Enabling Media Autosense for port %d\n",
2219 if (eeprom_data
& IGB_MAS_ENABLE_1
) {
2220 adapter
->flags
|= IGB_FLAG_MAS_ENABLE
;
2221 netdev_info(adapter
->netdev
,
2222 "MAS: Enabling Media Autosense for port %d\n",
2227 if (eeprom_data
& IGB_MAS_ENABLE_2
) {
2228 adapter
->flags
|= IGB_FLAG_MAS_ENABLE
;
2229 netdev_info(adapter
->netdev
,
2230 "MAS: Enabling Media Autosense for port %d\n",
2235 if (eeprom_data
& IGB_MAS_ENABLE_3
) {
2236 adapter
->flags
|= IGB_FLAG_MAS_ENABLE
;
2237 netdev_info(adapter
->netdev
,
2238 "MAS: Enabling Media Autosense for port %d\n",
2243 /* Shouldn't get here */
2244 netdev_err(adapter
->netdev
,
2245 "MAS: Invalid port configuration, returning\n");
2251 * igb_init_i2c - Init I2C interface
2252 * @adapter: pointer to adapter structure
2254 static s32
igb_init_i2c(struct igb_adapter
*adapter
)
2258 /* I2C interface supported on i350 devices */
2259 if (adapter
->hw
.mac
.type
!= e1000_i350
)
2262 /* Initialize the i2c bus which is controlled by the registers.
2263 * This bus will use the i2c_algo_bit structue that implements
2264 * the protocol through toggling of the 4 bits in the register.
2266 adapter
->i2c_adap
.owner
= THIS_MODULE
;
2267 adapter
->i2c_algo
= igb_i2c_algo
;
2268 adapter
->i2c_algo
.data
= adapter
;
2269 adapter
->i2c_adap
.algo_data
= &adapter
->i2c_algo
;
2270 adapter
->i2c_adap
.dev
.parent
= &adapter
->pdev
->dev
;
2271 strlcpy(adapter
->i2c_adap
.name
, "igb BB",
2272 sizeof(adapter
->i2c_adap
.name
));
2273 status
= i2c_bit_add_bus(&adapter
->i2c_adap
);
2278 * igb_probe - Device Initialization Routine
2279 * @pdev: PCI device information struct
2280 * @ent: entry in igb_pci_tbl
2282 * Returns 0 on success, negative on failure
2284 * igb_probe initializes an adapter identified by a pci_dev structure.
2285 * The OS initialization, configuring of the adapter private structure,
2286 * and a hardware reset occur.
2288 static int igb_probe(struct pci_dev
*pdev
, const struct pci_device_id
*ent
)
2290 struct net_device
*netdev
;
2291 struct igb_adapter
*adapter
;
2292 struct e1000_hw
*hw
;
2293 u16 eeprom_data
= 0;
2295 static int global_quad_port_a
; /* global quad port a indication */
2296 const struct e1000_info
*ei
= igb_info_tbl
[ent
->driver_data
];
2297 int err
, pci_using_dac
;
2298 u8 part_str
[E1000_PBANUM_LENGTH
];
2300 /* Catch broken hardware that put the wrong VF device ID in
2301 * the PCIe SR-IOV capability.
2303 if (pdev
->is_virtfn
) {
2304 WARN(1, KERN_ERR
"%s (%hx:%hx) should not be a VF!\n",
2305 pci_name(pdev
), pdev
->vendor
, pdev
->device
);
2309 err
= pci_enable_device_mem(pdev
);
2314 err
= dma_set_mask_and_coherent(&pdev
->dev
, DMA_BIT_MASK(64));
2318 err
= dma_set_mask_and_coherent(&pdev
->dev
, DMA_BIT_MASK(32));
2321 "No usable DMA configuration, aborting\n");
2326 err
= pci_request_selected_regions(pdev
, pci_select_bars(pdev
,
2332 pci_enable_pcie_error_reporting(pdev
);
2334 pci_set_master(pdev
);
2335 pci_save_state(pdev
);
2338 netdev
= alloc_etherdev_mq(sizeof(struct igb_adapter
),
2341 goto err_alloc_etherdev
;
2343 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
2345 pci_set_drvdata(pdev
, netdev
);
2346 adapter
= netdev_priv(netdev
);
2347 adapter
->netdev
= netdev
;
2348 adapter
->pdev
= pdev
;
2351 adapter
->msg_enable
= netif_msg_init(debug
, DEFAULT_MSG_ENABLE
);
2354 adapter
->io_addr
= pci_iomap(pdev
, 0, 0);
2355 if (!adapter
->io_addr
)
2357 /* hw->hw_addr can be altered, we'll use adapter->io_addr for unmap */
2358 hw
->hw_addr
= adapter
->io_addr
;
2360 netdev
->netdev_ops
= &igb_netdev_ops
;
2361 igb_set_ethtool_ops(netdev
);
2362 netdev
->watchdog_timeo
= 5 * HZ
;
2364 strncpy(netdev
->name
, pci_name(pdev
), sizeof(netdev
->name
) - 1);
2366 netdev
->mem_start
= pci_resource_start(pdev
, 0);
2367 netdev
->mem_end
= pci_resource_end(pdev
, 0);
2369 /* PCI config space info */
2370 hw
->vendor_id
= pdev
->vendor
;
2371 hw
->device_id
= pdev
->device
;
2372 hw
->revision_id
= pdev
->revision
;
2373 hw
->subsystem_vendor_id
= pdev
->subsystem_vendor
;
2374 hw
->subsystem_device_id
= pdev
->subsystem_device
;
2376 /* Copy the default MAC, PHY and NVM function pointers */
2377 memcpy(&hw
->mac
.ops
, ei
->mac_ops
, sizeof(hw
->mac
.ops
));
2378 memcpy(&hw
->phy
.ops
, ei
->phy_ops
, sizeof(hw
->phy
.ops
));
2379 memcpy(&hw
->nvm
.ops
, ei
->nvm_ops
, sizeof(hw
->nvm
.ops
));
2380 /* Initialize skew-specific constants */
2381 err
= ei
->get_invariants(hw
);
2385 /* setup the private structure */
2386 err
= igb_sw_init(adapter
);
2390 igb_get_bus_info_pcie(hw
);
2392 hw
->phy
.autoneg_wait_to_complete
= false;
2394 /* Copper options */
2395 if (hw
->phy
.media_type
== e1000_media_type_copper
) {
2396 hw
->phy
.mdix
= AUTO_ALL_MODES
;
2397 hw
->phy
.disable_polarity_correction
= false;
2398 hw
->phy
.ms_type
= e1000_ms_hw_default
;
2401 if (igb_check_reset_block(hw
))
2402 dev_info(&pdev
->dev
,
2403 "PHY reset is blocked due to SOL/IDER session.\n");
2405 /* features is initialized to 0 in allocation, it might have bits
2406 * set by igb_sw_init so we should use an or instead of an
2409 netdev
->features
|= NETIF_F_SG
|
2416 if (hw
->mac
.type
>= e1000_82576
)
2417 netdev
->features
|= NETIF_F_SCTP_CRC
;
2419 #define IGB_GSO_PARTIAL_FEATURES (NETIF_F_GSO_GRE | \
2420 NETIF_F_GSO_GRE_CSUM | \
2421 NETIF_F_GSO_IPXIP4 | \
2422 NETIF_F_GSO_IPXIP6 | \
2423 NETIF_F_GSO_UDP_TUNNEL | \
2424 NETIF_F_GSO_UDP_TUNNEL_CSUM)
2426 netdev
->gso_partial_features
= IGB_GSO_PARTIAL_FEATURES
;
2427 netdev
->features
|= NETIF_F_GSO_PARTIAL
| IGB_GSO_PARTIAL_FEATURES
;
2429 /* copy netdev features into list of user selectable features */
2430 netdev
->hw_features
|= netdev
->features
|
2431 NETIF_F_HW_VLAN_CTAG_RX
|
2432 NETIF_F_HW_VLAN_CTAG_TX
|
2435 if (hw
->mac
.type
>= e1000_i350
)
2436 netdev
->hw_features
|= NETIF_F_NTUPLE
;
2439 netdev
->features
|= NETIF_F_HIGHDMA
;
2441 netdev
->vlan_features
|= netdev
->features
| NETIF_F_TSO_MANGLEID
;
2442 netdev
->mpls_features
|= NETIF_F_HW_CSUM
;
2443 netdev
->hw_enc_features
|= netdev
->vlan_features
;
2445 /* set this bit last since it cannot be part of vlan_features */
2446 netdev
->features
|= NETIF_F_HW_VLAN_CTAG_FILTER
|
2447 NETIF_F_HW_VLAN_CTAG_RX
|
2448 NETIF_F_HW_VLAN_CTAG_TX
;
2450 netdev
->priv_flags
|= IFF_SUPP_NOFCS
;
2452 netdev
->priv_flags
|= IFF_UNICAST_FLT
;
2454 adapter
->en_mng_pt
= igb_enable_mng_pass_thru(hw
);
2456 /* before reading the NVM, reset the controller to put the device in a
2457 * known good starting state
2459 hw
->mac
.ops
.reset_hw(hw
);
2461 /* make sure the NVM is good , i211/i210 parts can have special NVM
2462 * that doesn't contain a checksum
2464 switch (hw
->mac
.type
) {
2467 if (igb_get_flash_presence_i210(hw
)) {
2468 if (hw
->nvm
.ops
.validate(hw
) < 0) {
2470 "The NVM Checksum Is Not Valid\n");
2477 if (hw
->nvm
.ops
.validate(hw
) < 0) {
2478 dev_err(&pdev
->dev
, "The NVM Checksum Is Not Valid\n");
2485 if (eth_platform_get_mac_address(&pdev
->dev
, hw
->mac
.addr
)) {
2486 /* copy the MAC address out of the NVM */
2487 if (hw
->mac
.ops
.read_mac_addr(hw
))
2488 dev_err(&pdev
->dev
, "NVM Read Error\n");
2491 memcpy(netdev
->dev_addr
, hw
->mac
.addr
, netdev
->addr_len
);
2493 if (!is_valid_ether_addr(netdev
->dev_addr
)) {
2494 dev_err(&pdev
->dev
, "Invalid MAC Address\n");
2499 /* get firmware version for ethtool -i */
2500 igb_set_fw_version(adapter
);
2502 /* configure RXPBSIZE and TXPBSIZE */
2503 if (hw
->mac
.type
== e1000_i210
) {
2504 wr32(E1000_RXPBS
, I210_RXPBSIZE_DEFAULT
);
2505 wr32(E1000_TXPBS
, I210_TXPBSIZE_DEFAULT
);
2508 setup_timer(&adapter
->watchdog_timer
, igb_watchdog
,
2509 (unsigned long) adapter
);
2510 setup_timer(&adapter
->phy_info_timer
, igb_update_phy_info
,
2511 (unsigned long) adapter
);
2513 INIT_WORK(&adapter
->reset_task
, igb_reset_task
);
2514 INIT_WORK(&adapter
->watchdog_task
, igb_watchdog_task
);
2516 /* Initialize link properties that are user-changeable */
2517 adapter
->fc_autoneg
= true;
2518 hw
->mac
.autoneg
= true;
2519 hw
->phy
.autoneg_advertised
= 0x2f;
2521 hw
->fc
.requested_mode
= e1000_fc_default
;
2522 hw
->fc
.current_mode
= e1000_fc_default
;
2524 igb_validate_mdi_setting(hw
);
2526 /* By default, support wake on port A */
2527 if (hw
->bus
.func
== 0)
2528 adapter
->flags
|= IGB_FLAG_WOL_SUPPORTED
;
2530 /* Check the NVM for wake support on non-port A ports */
2531 if (hw
->mac
.type
>= e1000_82580
)
2532 hw
->nvm
.ops
.read(hw
, NVM_INIT_CONTROL3_PORT_A
+
2533 NVM_82580_LAN_FUNC_OFFSET(hw
->bus
.func
), 1,
2535 else if (hw
->bus
.func
== 1)
2536 hw
->nvm
.ops
.read(hw
, NVM_INIT_CONTROL3_PORT_B
, 1, &eeprom_data
);
2538 if (eeprom_data
& IGB_EEPROM_APME
)
2539 adapter
->flags
|= IGB_FLAG_WOL_SUPPORTED
;
2541 /* now that we have the eeprom settings, apply the special cases where
2542 * the eeprom may be wrong or the board simply won't support wake on
2543 * lan on a particular port
2545 switch (pdev
->device
) {
2546 case E1000_DEV_ID_82575GB_QUAD_COPPER
:
2547 adapter
->flags
&= ~IGB_FLAG_WOL_SUPPORTED
;
2549 case E1000_DEV_ID_82575EB_FIBER_SERDES
:
2550 case E1000_DEV_ID_82576_FIBER
:
2551 case E1000_DEV_ID_82576_SERDES
:
2552 /* Wake events only supported on port A for dual fiber
2553 * regardless of eeprom setting
2555 if (rd32(E1000_STATUS
) & E1000_STATUS_FUNC_1
)
2556 adapter
->flags
&= ~IGB_FLAG_WOL_SUPPORTED
;
2558 case E1000_DEV_ID_82576_QUAD_COPPER
:
2559 case E1000_DEV_ID_82576_QUAD_COPPER_ET2
:
2560 /* if quad port adapter, disable WoL on all but port A */
2561 if (global_quad_port_a
!= 0)
2562 adapter
->flags
&= ~IGB_FLAG_WOL_SUPPORTED
;
2564 adapter
->flags
|= IGB_FLAG_QUAD_PORT_A
;
2565 /* Reset for multiple quad port adapters */
2566 if (++global_quad_port_a
== 4)
2567 global_quad_port_a
= 0;
2570 /* If the device can't wake, don't set software support */
2571 if (!device_can_wakeup(&adapter
->pdev
->dev
))
2572 adapter
->flags
&= ~IGB_FLAG_WOL_SUPPORTED
;
2575 /* initialize the wol settings based on the eeprom settings */
2576 if (adapter
->flags
& IGB_FLAG_WOL_SUPPORTED
)
2577 adapter
->wol
|= E1000_WUFC_MAG
;
2579 /* Some vendors want WoL disabled by default, but still supported */
2580 if ((hw
->mac
.type
== e1000_i350
) &&
2581 (pdev
->subsystem_vendor
== PCI_VENDOR_ID_HP
)) {
2582 adapter
->flags
|= IGB_FLAG_WOL_SUPPORTED
;
2586 /* Some vendors want the ability to Use the EEPROM setting as
2587 * enable/disable only, and not for capability
2589 if (((hw
->mac
.type
== e1000_i350
) ||
2590 (hw
->mac
.type
== e1000_i354
)) &&
2591 (pdev
->subsystem_vendor
== PCI_VENDOR_ID_DELL
)) {
2592 adapter
->flags
|= IGB_FLAG_WOL_SUPPORTED
;
2595 if (hw
->mac
.type
== e1000_i350
) {
2596 if (((pdev
->subsystem_device
== 0x5001) ||
2597 (pdev
->subsystem_device
== 0x5002)) &&
2598 (hw
->bus
.func
== 0)) {
2599 adapter
->flags
|= IGB_FLAG_WOL_SUPPORTED
;
2602 if (pdev
->subsystem_device
== 0x1F52)
2603 adapter
->flags
|= IGB_FLAG_WOL_SUPPORTED
;
2606 device_set_wakeup_enable(&adapter
->pdev
->dev
,
2607 adapter
->flags
& IGB_FLAG_WOL_SUPPORTED
);
2609 /* reset the hardware with the new settings */
2612 /* Init the I2C interface */
2613 err
= igb_init_i2c(adapter
);
2615 dev_err(&pdev
->dev
, "failed to init i2c interface\n");
2619 /* let the f/w know that the h/w is now under the control of the
2622 igb_get_hw_control(adapter
);
2624 strcpy(netdev
->name
, "eth%d");
2625 err
= register_netdev(netdev
);
2629 /* carrier off reporting is important to ethtool even BEFORE open */
2630 netif_carrier_off(netdev
);
2632 #ifdef CONFIG_IGB_DCA
2633 if (dca_add_requester(&pdev
->dev
) == 0) {
2634 adapter
->flags
|= IGB_FLAG_DCA_ENABLED
;
2635 dev_info(&pdev
->dev
, "DCA enabled\n");
2636 igb_setup_dca(adapter
);
2640 #ifdef CONFIG_IGB_HWMON
2641 /* Initialize the thermal sensor on i350 devices. */
2642 if (hw
->mac
.type
== e1000_i350
&& hw
->bus
.func
== 0) {
2645 /* Read the NVM to determine if this i350 device supports an
2646 * external thermal sensor.
2648 hw
->nvm
.ops
.read(hw
, NVM_ETS_CFG
, 1, &ets_word
);
2649 if (ets_word
!= 0x0000 && ets_word
!= 0xFFFF)
2650 adapter
->ets
= true;
2652 adapter
->ets
= false;
2653 if (igb_sysfs_init(adapter
))
2655 "failed to allocate sysfs resources\n");
2657 adapter
->ets
= false;
2660 /* Check if Media Autosense is enabled */
2662 if (hw
->dev_spec
._82575
.mas_capable
)
2663 igb_init_mas(adapter
);
2665 /* do hw tstamp init after resetting */
2666 igb_ptp_init(adapter
);
2668 dev_info(&pdev
->dev
, "Intel(R) Gigabit Ethernet Network Connection\n");
2669 /* print bus type/speed/width info, not applicable to i354 */
2670 if (hw
->mac
.type
!= e1000_i354
) {
2671 dev_info(&pdev
->dev
, "%s: (PCIe:%s:%s) %pM\n",
2673 ((hw
->bus
.speed
== e1000_bus_speed_2500
) ? "2.5Gb/s" :
2674 (hw
->bus
.speed
== e1000_bus_speed_5000
) ? "5.0Gb/s" :
2676 ((hw
->bus
.width
== e1000_bus_width_pcie_x4
) ?
2678 (hw
->bus
.width
== e1000_bus_width_pcie_x2
) ?
2680 (hw
->bus
.width
== e1000_bus_width_pcie_x1
) ?
2681 "Width x1" : "unknown"), netdev
->dev_addr
);
2684 if ((hw
->mac
.type
>= e1000_i210
||
2685 igb_get_flash_presence_i210(hw
))) {
2686 ret_val
= igb_read_part_string(hw
, part_str
,
2687 E1000_PBANUM_LENGTH
);
2689 ret_val
= -E1000_ERR_INVM_VALUE_NOT_FOUND
;
2693 strcpy(part_str
, "Unknown");
2694 dev_info(&pdev
->dev
, "%s: PBA No: %s\n", netdev
->name
, part_str
);
2695 dev_info(&pdev
->dev
,
2696 "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
2697 (adapter
->flags
& IGB_FLAG_HAS_MSIX
) ? "MSI-X" :
2698 (adapter
->flags
& IGB_FLAG_HAS_MSI
) ? "MSI" : "legacy",
2699 adapter
->num_rx_queues
, adapter
->num_tx_queues
);
2700 if (hw
->phy
.media_type
== e1000_media_type_copper
) {
2701 switch (hw
->mac
.type
) {
2705 /* Enable EEE for internal copper PHY devices */
2706 err
= igb_set_eee_i350(hw
, true, true);
2708 (!hw
->dev_spec
._82575
.eee_disable
)) {
2709 adapter
->eee_advert
=
2710 MDIO_EEE_100TX
| MDIO_EEE_1000T
;
2711 adapter
->flags
|= IGB_FLAG_EEE
;
2715 if ((rd32(E1000_CTRL_EXT
) &
2716 E1000_CTRL_EXT_LINK_MODE_SGMII
)) {
2717 err
= igb_set_eee_i354(hw
, true, true);
2719 (!hw
->dev_spec
._82575
.eee_disable
)) {
2720 adapter
->eee_advert
=
2721 MDIO_EEE_100TX
| MDIO_EEE_1000T
;
2722 adapter
->flags
|= IGB_FLAG_EEE
;
2730 pm_runtime_put_noidle(&pdev
->dev
);
2734 igb_release_hw_control(adapter
);
2735 memset(&adapter
->i2c_adap
, 0, sizeof(adapter
->i2c_adap
));
2737 if (!igb_check_reset_block(hw
))
2740 if (hw
->flash_address
)
2741 iounmap(hw
->flash_address
);
2743 kfree(adapter
->shadow_vfta
);
2744 igb_clear_interrupt_scheme(adapter
);
2745 #ifdef CONFIG_PCI_IOV
2746 igb_disable_sriov(pdev
);
2748 pci_iounmap(pdev
, adapter
->io_addr
);
2750 free_netdev(netdev
);
2752 pci_release_selected_regions(pdev
,
2753 pci_select_bars(pdev
, IORESOURCE_MEM
));
2756 pci_disable_device(pdev
);
2760 #ifdef CONFIG_PCI_IOV
2761 static int igb_disable_sriov(struct pci_dev
*pdev
)
2763 struct net_device
*netdev
= pci_get_drvdata(pdev
);
2764 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2765 struct e1000_hw
*hw
= &adapter
->hw
;
2767 /* reclaim resources allocated to VFs */
2768 if (adapter
->vf_data
) {
2769 /* disable iov and allow time for transactions to clear */
2770 if (pci_vfs_assigned(pdev
)) {
2771 dev_warn(&pdev
->dev
,
2772 "Cannot deallocate SR-IOV virtual functions while they are assigned - VFs will not be deallocated\n");
2775 pci_disable_sriov(pdev
);
2779 kfree(adapter
->vf_data
);
2780 adapter
->vf_data
= NULL
;
2781 adapter
->vfs_allocated_count
= 0;
2782 wr32(E1000_IOVCTL
, E1000_IOVCTL_REUSE_VFQ
);
2785 dev_info(&pdev
->dev
, "IOV Disabled\n");
2787 /* Re-enable DMA Coalescing flag since IOV is turned off */
2788 adapter
->flags
|= IGB_FLAG_DMAC
;
2794 static int igb_enable_sriov(struct pci_dev
*pdev
, int num_vfs
)
2796 struct net_device
*netdev
= pci_get_drvdata(pdev
);
2797 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2798 int old_vfs
= pci_num_vf(pdev
);
2802 if (!(adapter
->flags
& IGB_FLAG_HAS_MSIX
) || num_vfs
> 7) {
2810 dev_info(&pdev
->dev
, "%d pre-allocated VFs found - override max_vfs setting of %d\n",
2812 adapter
->vfs_allocated_count
= old_vfs
;
2814 adapter
->vfs_allocated_count
= num_vfs
;
2816 adapter
->vf_data
= kcalloc(adapter
->vfs_allocated_count
,
2817 sizeof(struct vf_data_storage
), GFP_KERNEL
);
2819 /* if allocation failed then we do not support SR-IOV */
2820 if (!adapter
->vf_data
) {
2821 adapter
->vfs_allocated_count
= 0;
2823 "Unable to allocate memory for VF Data Storage\n");
2828 /* only call pci_enable_sriov() if no VFs are allocated already */
2830 err
= pci_enable_sriov(pdev
, adapter
->vfs_allocated_count
);
2834 dev_info(&pdev
->dev
, "%d VFs allocated\n",
2835 adapter
->vfs_allocated_count
);
2836 for (i
= 0; i
< adapter
->vfs_allocated_count
; i
++)
2837 igb_vf_configure(adapter
, i
);
2839 /* DMA Coalescing is not supported in IOV mode. */
2840 adapter
->flags
&= ~IGB_FLAG_DMAC
;
2844 kfree(adapter
->vf_data
);
2845 adapter
->vf_data
= NULL
;
2846 adapter
->vfs_allocated_count
= 0;
2853 * igb_remove_i2c - Cleanup I2C interface
2854 * @adapter: pointer to adapter structure
2856 static void igb_remove_i2c(struct igb_adapter
*adapter
)
2858 /* free the adapter bus structure */
2859 i2c_del_adapter(&adapter
->i2c_adap
);
2863 * igb_remove - Device Removal Routine
2864 * @pdev: PCI device information struct
2866 * igb_remove is called by the PCI subsystem to alert the driver
2867 * that it should release a PCI device. The could be caused by a
2868 * Hot-Plug event, or because the driver is going to be removed from
2871 static void igb_remove(struct pci_dev
*pdev
)
2873 struct net_device
*netdev
= pci_get_drvdata(pdev
);
2874 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2875 struct e1000_hw
*hw
= &adapter
->hw
;
2877 pm_runtime_get_noresume(&pdev
->dev
);
2878 #ifdef CONFIG_IGB_HWMON
2879 igb_sysfs_exit(adapter
);
2881 igb_remove_i2c(adapter
);
2882 igb_ptp_stop(adapter
);
2883 /* The watchdog timer may be rescheduled, so explicitly
2884 * disable watchdog from being rescheduled.
2886 set_bit(__IGB_DOWN
, &adapter
->state
);
2887 del_timer_sync(&adapter
->watchdog_timer
);
2888 del_timer_sync(&adapter
->phy_info_timer
);
2890 cancel_work_sync(&adapter
->reset_task
);
2891 cancel_work_sync(&adapter
->watchdog_task
);
2893 #ifdef CONFIG_IGB_DCA
2894 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
) {
2895 dev_info(&pdev
->dev
, "DCA disabled\n");
2896 dca_remove_requester(&pdev
->dev
);
2897 adapter
->flags
&= ~IGB_FLAG_DCA_ENABLED
;
2898 wr32(E1000_DCA_CTRL
, E1000_DCA_CTRL_DCA_MODE_DISABLE
);
2902 /* Release control of h/w to f/w. If f/w is AMT enabled, this
2903 * would have already happened in close and is redundant.
2905 igb_release_hw_control(adapter
);
2907 #ifdef CONFIG_PCI_IOV
2908 igb_disable_sriov(pdev
);
2911 unregister_netdev(netdev
);
2913 igb_clear_interrupt_scheme(adapter
);
2915 pci_iounmap(pdev
, adapter
->io_addr
);
2916 if (hw
->flash_address
)
2917 iounmap(hw
->flash_address
);
2918 pci_release_selected_regions(pdev
,
2919 pci_select_bars(pdev
, IORESOURCE_MEM
));
2921 kfree(adapter
->shadow_vfta
);
2922 free_netdev(netdev
);
2924 pci_disable_pcie_error_reporting(pdev
);
2926 pci_disable_device(pdev
);
2930 * igb_probe_vfs - Initialize vf data storage and add VFs to pci config space
2931 * @adapter: board private structure to initialize
2933 * This function initializes the vf specific data storage and then attempts to
2934 * allocate the VFs. The reason for ordering it this way is because it is much
2935 * mor expensive time wise to disable SR-IOV than it is to allocate and free
2936 * the memory for the VFs.
2938 static void igb_probe_vfs(struct igb_adapter
*adapter
)
2940 #ifdef CONFIG_PCI_IOV
2941 struct pci_dev
*pdev
= adapter
->pdev
;
2942 struct e1000_hw
*hw
= &adapter
->hw
;
2944 /* Virtualization features not supported on i210 family. */
2945 if ((hw
->mac
.type
== e1000_i210
) || (hw
->mac
.type
== e1000_i211
))
2948 /* Of the below we really only want the effect of getting
2949 * IGB_FLAG_HAS_MSIX set (if available), without which
2950 * igb_enable_sriov() has no effect.
2952 igb_set_interrupt_capability(adapter
, true);
2953 igb_reset_interrupt_capability(adapter
);
2955 pci_sriov_set_totalvfs(pdev
, 7);
2956 igb_enable_sriov(pdev
, max_vfs
);
2958 #endif /* CONFIG_PCI_IOV */
2961 static void igb_init_queue_configuration(struct igb_adapter
*adapter
)
2963 struct e1000_hw
*hw
= &adapter
->hw
;
2966 /* Determine the maximum number of RSS queues supported. */
2967 switch (hw
->mac
.type
) {
2969 max_rss_queues
= IGB_MAX_RX_QUEUES_I211
;
2973 max_rss_queues
= IGB_MAX_RX_QUEUES_82575
;
2976 /* I350 cannot do RSS and SR-IOV at the same time */
2977 if (!!adapter
->vfs_allocated_count
) {
2983 if (!!adapter
->vfs_allocated_count
) {
2991 max_rss_queues
= IGB_MAX_RX_QUEUES
;
2995 adapter
->rss_queues
= min_t(u32
, max_rss_queues
, num_online_cpus());
2997 igb_set_flag_queue_pairs(adapter
, max_rss_queues
);
3000 void igb_set_flag_queue_pairs(struct igb_adapter
*adapter
,
3001 const u32 max_rss_queues
)
3003 struct e1000_hw
*hw
= &adapter
->hw
;
3005 /* Determine if we need to pair queues. */
3006 switch (hw
->mac
.type
) {
3009 /* Device supports enough interrupts without queue pairing. */
3017 /* If rss_queues > half of max_rss_queues, pair the queues in
3018 * order to conserve interrupts due to limited supply.
3020 if (adapter
->rss_queues
> (max_rss_queues
/ 2))
3021 adapter
->flags
|= IGB_FLAG_QUEUE_PAIRS
;
3023 adapter
->flags
&= ~IGB_FLAG_QUEUE_PAIRS
;
3029 * igb_sw_init - Initialize general software structures (struct igb_adapter)
3030 * @adapter: board private structure to initialize
3032 * igb_sw_init initializes the Adapter private data structure.
3033 * Fields are initialized based on PCI device information and
3034 * OS network device settings (MTU size).
3036 static int igb_sw_init(struct igb_adapter
*adapter
)
3038 struct e1000_hw
*hw
= &adapter
->hw
;
3039 struct net_device
*netdev
= adapter
->netdev
;
3040 struct pci_dev
*pdev
= adapter
->pdev
;
3042 pci_read_config_word(pdev
, PCI_COMMAND
, &hw
->bus
.pci_cmd_word
);
3044 /* set default ring sizes */
3045 adapter
->tx_ring_count
= IGB_DEFAULT_TXD
;
3046 adapter
->rx_ring_count
= IGB_DEFAULT_RXD
;
3048 /* set default ITR values */
3049 adapter
->rx_itr_setting
= IGB_DEFAULT_ITR
;
3050 adapter
->tx_itr_setting
= IGB_DEFAULT_ITR
;
3052 /* set default work limits */
3053 adapter
->tx_work_limit
= IGB_DEFAULT_TX_WORK
;
3055 adapter
->max_frame_size
= netdev
->mtu
+ ETH_HLEN
+ ETH_FCS_LEN
+
3057 adapter
->min_frame_size
= ETH_ZLEN
+ ETH_FCS_LEN
;
3059 spin_lock_init(&adapter
->stats64_lock
);
3060 #ifdef CONFIG_PCI_IOV
3061 switch (hw
->mac
.type
) {
3065 dev_warn(&pdev
->dev
,
3066 "Maximum of 7 VFs per PF, using max\n");
3067 max_vfs
= adapter
->vfs_allocated_count
= 7;
3069 adapter
->vfs_allocated_count
= max_vfs
;
3070 if (adapter
->vfs_allocated_count
)
3071 dev_warn(&pdev
->dev
,
3072 "Enabling SR-IOV VFs using the module parameter is deprecated - please use the pci sysfs interface.\n");
3077 #endif /* CONFIG_PCI_IOV */
3079 /* Assume MSI-X interrupts, will be checked during IRQ allocation */
3080 adapter
->flags
|= IGB_FLAG_HAS_MSIX
;
3082 igb_probe_vfs(adapter
);
3084 igb_init_queue_configuration(adapter
);
3086 /* Setup and initialize a copy of the hw vlan table array */
3087 adapter
->shadow_vfta
= kcalloc(E1000_VLAN_FILTER_TBL_SIZE
, sizeof(u32
),
3090 /* This call may decrease the number of queues */
3091 if (igb_init_interrupt_scheme(adapter
, true)) {
3092 dev_err(&pdev
->dev
, "Unable to allocate memory for queues\n");
3096 /* Explicitly disable IRQ since the NIC can be in any state. */
3097 igb_irq_disable(adapter
);
3099 if (hw
->mac
.type
>= e1000_i350
)
3100 adapter
->flags
&= ~IGB_FLAG_DMAC
;
3102 set_bit(__IGB_DOWN
, &adapter
->state
);
3107 * igb_open - Called when a network interface is made active
3108 * @netdev: network interface device structure
3110 * Returns 0 on success, negative value on failure
3112 * The open entry point is called when a network interface is made
3113 * active by the system (IFF_UP). At this point all resources needed
3114 * for transmit and receive operations are allocated, the interrupt
3115 * handler is registered with the OS, the watchdog timer is started,
3116 * and the stack is notified that the interface is ready.
3118 static int __igb_open(struct net_device
*netdev
, bool resuming
)
3120 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3121 struct e1000_hw
*hw
= &adapter
->hw
;
3122 struct pci_dev
*pdev
= adapter
->pdev
;
3126 /* disallow open during test */
3127 if (test_bit(__IGB_TESTING
, &adapter
->state
)) {
3133 pm_runtime_get_sync(&pdev
->dev
);
3135 netif_carrier_off(netdev
);
3137 /* allocate transmit descriptors */
3138 err
= igb_setup_all_tx_resources(adapter
);
3142 /* allocate receive descriptors */
3143 err
= igb_setup_all_rx_resources(adapter
);
3147 igb_power_up_link(adapter
);
3149 /* before we allocate an interrupt, we must be ready to handle it.
3150 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
3151 * as soon as we call pci_request_irq, so we have to setup our
3152 * clean_rx handler before we do so.
3154 igb_configure(adapter
);
3156 err
= igb_request_irq(adapter
);
3160 /* Notify the stack of the actual queue counts. */
3161 err
= netif_set_real_num_tx_queues(adapter
->netdev
,
3162 adapter
->num_tx_queues
);
3164 goto err_set_queues
;
3166 err
= netif_set_real_num_rx_queues(adapter
->netdev
,
3167 adapter
->num_rx_queues
);
3169 goto err_set_queues
;
3171 /* From here on the code is the same as igb_up() */
3172 clear_bit(__IGB_DOWN
, &adapter
->state
);
3174 for (i
= 0; i
< adapter
->num_q_vectors
; i
++)
3175 napi_enable(&(adapter
->q_vector
[i
]->napi
));
3177 /* Clear any pending interrupts. */
3180 igb_irq_enable(adapter
);
3182 /* notify VFs that reset has been completed */
3183 if (adapter
->vfs_allocated_count
) {
3184 u32 reg_data
= rd32(E1000_CTRL_EXT
);
3186 reg_data
|= E1000_CTRL_EXT_PFRSTD
;
3187 wr32(E1000_CTRL_EXT
, reg_data
);
3190 netif_tx_start_all_queues(netdev
);
3193 pm_runtime_put(&pdev
->dev
);
3195 /* start the watchdog. */
3196 hw
->mac
.get_link_status
= 1;
3197 schedule_work(&adapter
->watchdog_task
);
3202 igb_free_irq(adapter
);
3204 igb_release_hw_control(adapter
);
3205 igb_power_down_link(adapter
);
3206 igb_free_all_rx_resources(adapter
);
3208 igb_free_all_tx_resources(adapter
);
3212 pm_runtime_put(&pdev
->dev
);
3217 int igb_open(struct net_device
*netdev
)
3219 return __igb_open(netdev
, false);
3223 * igb_close - Disables a network interface
3224 * @netdev: network interface device structure
3226 * Returns 0, this is not allowed to fail
3228 * The close entry point is called when an interface is de-activated
3229 * by the OS. The hardware is still under the driver's control, but
3230 * needs to be disabled. A global MAC reset is issued to stop the
3231 * hardware, and all transmit and receive resources are freed.
3233 static int __igb_close(struct net_device
*netdev
, bool suspending
)
3235 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3236 struct pci_dev
*pdev
= adapter
->pdev
;
3238 WARN_ON(test_bit(__IGB_RESETTING
, &adapter
->state
));
3241 pm_runtime_get_sync(&pdev
->dev
);
3244 igb_free_irq(adapter
);
3246 igb_free_all_tx_resources(adapter
);
3247 igb_free_all_rx_resources(adapter
);
3250 pm_runtime_put_sync(&pdev
->dev
);
3254 int igb_close(struct net_device
*netdev
)
3256 return __igb_close(netdev
, false);
3260 * igb_setup_tx_resources - allocate Tx resources (Descriptors)
3261 * @tx_ring: tx descriptor ring (for a specific queue) to setup
3263 * Return 0 on success, negative on failure
3265 int igb_setup_tx_resources(struct igb_ring
*tx_ring
)
3267 struct device
*dev
= tx_ring
->dev
;
3270 size
= sizeof(struct igb_tx_buffer
) * tx_ring
->count
;
3272 tx_ring
->tx_buffer_info
= vzalloc(size
);
3273 if (!tx_ring
->tx_buffer_info
)
3276 /* round up to nearest 4K */
3277 tx_ring
->size
= tx_ring
->count
* sizeof(union e1000_adv_tx_desc
);
3278 tx_ring
->size
= ALIGN(tx_ring
->size
, 4096);
3280 tx_ring
->desc
= dma_alloc_coherent(dev
, tx_ring
->size
,
3281 &tx_ring
->dma
, GFP_KERNEL
);
3285 tx_ring
->next_to_use
= 0;
3286 tx_ring
->next_to_clean
= 0;
3291 vfree(tx_ring
->tx_buffer_info
);
3292 tx_ring
->tx_buffer_info
= NULL
;
3293 dev_err(dev
, "Unable to allocate memory for the Tx descriptor ring\n");
3298 * igb_setup_all_tx_resources - wrapper to allocate Tx resources
3299 * (Descriptors) for all queues
3300 * @adapter: board private structure
3302 * Return 0 on success, negative on failure
3304 static int igb_setup_all_tx_resources(struct igb_adapter
*adapter
)
3306 struct pci_dev
*pdev
= adapter
->pdev
;
3309 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
3310 err
= igb_setup_tx_resources(adapter
->tx_ring
[i
]);
3313 "Allocation for Tx Queue %u failed\n", i
);
3314 for (i
--; i
>= 0; i
--)
3315 igb_free_tx_resources(adapter
->tx_ring
[i
]);
3324 * igb_setup_tctl - configure the transmit control registers
3325 * @adapter: Board private structure
3327 void igb_setup_tctl(struct igb_adapter
*adapter
)
3329 struct e1000_hw
*hw
= &adapter
->hw
;
3332 /* disable queue 0 which is enabled by default on 82575 and 82576 */
3333 wr32(E1000_TXDCTL(0), 0);
3335 /* Program the Transmit Control Register */
3336 tctl
= rd32(E1000_TCTL
);
3337 tctl
&= ~E1000_TCTL_CT
;
3338 tctl
|= E1000_TCTL_PSP
| E1000_TCTL_RTLC
|
3339 (E1000_COLLISION_THRESHOLD
<< E1000_CT_SHIFT
);
3341 igb_config_collision_dist(hw
);
3343 /* Enable transmits */
3344 tctl
|= E1000_TCTL_EN
;
3346 wr32(E1000_TCTL
, tctl
);
3350 * igb_configure_tx_ring - Configure transmit ring after Reset
3351 * @adapter: board private structure
3352 * @ring: tx ring to configure
3354 * Configure a transmit ring after a reset.
3356 void igb_configure_tx_ring(struct igb_adapter
*adapter
,
3357 struct igb_ring
*ring
)
3359 struct e1000_hw
*hw
= &adapter
->hw
;
3361 u64 tdba
= ring
->dma
;
3362 int reg_idx
= ring
->reg_idx
;
3364 /* disable the queue */
3365 wr32(E1000_TXDCTL(reg_idx
), 0);
3369 wr32(E1000_TDLEN(reg_idx
),
3370 ring
->count
* sizeof(union e1000_adv_tx_desc
));
3371 wr32(E1000_TDBAL(reg_idx
),
3372 tdba
& 0x00000000ffffffffULL
);
3373 wr32(E1000_TDBAH(reg_idx
), tdba
>> 32);
3375 ring
->tail
= hw
->hw_addr
+ E1000_TDT(reg_idx
);
3376 wr32(E1000_TDH(reg_idx
), 0);
3377 writel(0, ring
->tail
);
3379 txdctl
|= IGB_TX_PTHRESH
;
3380 txdctl
|= IGB_TX_HTHRESH
<< 8;
3381 txdctl
|= IGB_TX_WTHRESH
<< 16;
3383 txdctl
|= E1000_TXDCTL_QUEUE_ENABLE
;
3384 wr32(E1000_TXDCTL(reg_idx
), txdctl
);
3388 * igb_configure_tx - Configure transmit Unit after Reset
3389 * @adapter: board private structure
3391 * Configure the Tx unit of the MAC after a reset.
3393 static void igb_configure_tx(struct igb_adapter
*adapter
)
3397 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
3398 igb_configure_tx_ring(adapter
, adapter
->tx_ring
[i
]);
3402 * igb_setup_rx_resources - allocate Rx resources (Descriptors)
3403 * @rx_ring: Rx descriptor ring (for a specific queue) to setup
3405 * Returns 0 on success, negative on failure
3407 int igb_setup_rx_resources(struct igb_ring
*rx_ring
)
3409 struct device
*dev
= rx_ring
->dev
;
3412 size
= sizeof(struct igb_rx_buffer
) * rx_ring
->count
;
3414 rx_ring
->rx_buffer_info
= vzalloc(size
);
3415 if (!rx_ring
->rx_buffer_info
)
3418 /* Round up to nearest 4K */
3419 rx_ring
->size
= rx_ring
->count
* sizeof(union e1000_adv_rx_desc
);
3420 rx_ring
->size
= ALIGN(rx_ring
->size
, 4096);
3422 rx_ring
->desc
= dma_alloc_coherent(dev
, rx_ring
->size
,
3423 &rx_ring
->dma
, GFP_KERNEL
);
3427 rx_ring
->next_to_alloc
= 0;
3428 rx_ring
->next_to_clean
= 0;
3429 rx_ring
->next_to_use
= 0;
3434 vfree(rx_ring
->rx_buffer_info
);
3435 rx_ring
->rx_buffer_info
= NULL
;
3436 dev_err(dev
, "Unable to allocate memory for the Rx descriptor ring\n");
3441 * igb_setup_all_rx_resources - wrapper to allocate Rx resources
3442 * (Descriptors) for all queues
3443 * @adapter: board private structure
3445 * Return 0 on success, negative on failure
3447 static int igb_setup_all_rx_resources(struct igb_adapter
*adapter
)
3449 struct pci_dev
*pdev
= adapter
->pdev
;
3452 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
3453 err
= igb_setup_rx_resources(adapter
->rx_ring
[i
]);
3456 "Allocation for Rx Queue %u failed\n", i
);
3457 for (i
--; i
>= 0; i
--)
3458 igb_free_rx_resources(adapter
->rx_ring
[i
]);
3467 * igb_setup_mrqc - configure the multiple receive queue control registers
3468 * @adapter: Board private structure
3470 static void igb_setup_mrqc(struct igb_adapter
*adapter
)
3472 struct e1000_hw
*hw
= &adapter
->hw
;
3474 u32 j
, num_rx_queues
;
3477 netdev_rss_key_fill(rss_key
, sizeof(rss_key
));
3478 for (j
= 0; j
< 10; j
++)
3479 wr32(E1000_RSSRK(j
), rss_key
[j
]);
3481 num_rx_queues
= adapter
->rss_queues
;
3483 switch (hw
->mac
.type
) {
3485 /* 82576 supports 2 RSS queues for SR-IOV */
3486 if (adapter
->vfs_allocated_count
)
3493 if (adapter
->rss_indir_tbl_init
!= num_rx_queues
) {
3494 for (j
= 0; j
< IGB_RETA_SIZE
; j
++)
3495 adapter
->rss_indir_tbl
[j
] =
3496 (j
* num_rx_queues
) / IGB_RETA_SIZE
;
3497 adapter
->rss_indir_tbl_init
= num_rx_queues
;
3499 igb_write_rss_indir_tbl(adapter
);
3501 /* Disable raw packet checksumming so that RSS hash is placed in
3502 * descriptor on writeback. No need to enable TCP/UDP/IP checksum
3503 * offloads as they are enabled by default
3505 rxcsum
= rd32(E1000_RXCSUM
);
3506 rxcsum
|= E1000_RXCSUM_PCSD
;
3508 if (adapter
->hw
.mac
.type
>= e1000_82576
)
3509 /* Enable Receive Checksum Offload for SCTP */
3510 rxcsum
|= E1000_RXCSUM_CRCOFL
;
3512 /* Don't need to set TUOFL or IPOFL, they default to 1 */
3513 wr32(E1000_RXCSUM
, rxcsum
);
3515 /* Generate RSS hash based on packet types, TCP/UDP
3516 * port numbers and/or IPv4/v6 src and dst addresses
3518 mrqc
= E1000_MRQC_RSS_FIELD_IPV4
|
3519 E1000_MRQC_RSS_FIELD_IPV4_TCP
|
3520 E1000_MRQC_RSS_FIELD_IPV6
|
3521 E1000_MRQC_RSS_FIELD_IPV6_TCP
|
3522 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX
;
3524 if (adapter
->flags
& IGB_FLAG_RSS_FIELD_IPV4_UDP
)
3525 mrqc
|= E1000_MRQC_RSS_FIELD_IPV4_UDP
;
3526 if (adapter
->flags
& IGB_FLAG_RSS_FIELD_IPV6_UDP
)
3527 mrqc
|= E1000_MRQC_RSS_FIELD_IPV6_UDP
;
3529 /* If VMDq is enabled then we set the appropriate mode for that, else
3530 * we default to RSS so that an RSS hash is calculated per packet even
3531 * if we are only using one queue
3533 if (adapter
->vfs_allocated_count
) {
3534 if (hw
->mac
.type
> e1000_82575
) {
3535 /* Set the default pool for the PF's first queue */
3536 u32 vtctl
= rd32(E1000_VT_CTL
);
3538 vtctl
&= ~(E1000_VT_CTL_DEFAULT_POOL_MASK
|
3539 E1000_VT_CTL_DISABLE_DEF_POOL
);
3540 vtctl
|= adapter
->vfs_allocated_count
<<
3541 E1000_VT_CTL_DEFAULT_POOL_SHIFT
;
3542 wr32(E1000_VT_CTL
, vtctl
);
3544 if (adapter
->rss_queues
> 1)
3545 mrqc
|= E1000_MRQC_ENABLE_VMDQ_RSS_MQ
;
3547 mrqc
|= E1000_MRQC_ENABLE_VMDQ
;
3549 if (hw
->mac
.type
!= e1000_i211
)
3550 mrqc
|= E1000_MRQC_ENABLE_RSS_MQ
;
3552 igb_vmm_control(adapter
);
3554 wr32(E1000_MRQC
, mrqc
);
3558 * igb_setup_rctl - configure the receive control registers
3559 * @adapter: Board private structure
3561 void igb_setup_rctl(struct igb_adapter
*adapter
)
3563 struct e1000_hw
*hw
= &adapter
->hw
;
3566 rctl
= rd32(E1000_RCTL
);
3568 rctl
&= ~(3 << E1000_RCTL_MO_SHIFT
);
3569 rctl
&= ~(E1000_RCTL_LBM_TCVR
| E1000_RCTL_LBM_MAC
);
3571 rctl
|= E1000_RCTL_EN
| E1000_RCTL_BAM
| E1000_RCTL_RDMTS_HALF
|
3572 (hw
->mac
.mc_filter_type
<< E1000_RCTL_MO_SHIFT
);
3574 /* enable stripping of CRC. It's unlikely this will break BMC
3575 * redirection as it did with e1000. Newer features require
3576 * that the HW strips the CRC.
3578 rctl
|= E1000_RCTL_SECRC
;
3580 /* disable store bad packets and clear size bits. */
3581 rctl
&= ~(E1000_RCTL_SBP
| E1000_RCTL_SZ_256
);
3583 /* enable LPE to allow for reception of jumbo frames */
3584 rctl
|= E1000_RCTL_LPE
;
3586 /* disable queue 0 to prevent tail write w/o re-config */
3587 wr32(E1000_RXDCTL(0), 0);
3589 /* Attention!!! For SR-IOV PF driver operations you must enable
3590 * queue drop for all VF and PF queues to prevent head of line blocking
3591 * if an un-trusted VF does not provide descriptors to hardware.
3593 if (adapter
->vfs_allocated_count
) {
3594 /* set all queue drop enable bits */
3595 wr32(E1000_QDE
, ALL_QUEUES
);
3598 /* This is useful for sniffing bad packets. */
3599 if (adapter
->netdev
->features
& NETIF_F_RXALL
) {
3600 /* UPE and MPE will be handled by normal PROMISC logic
3601 * in e1000e_set_rx_mode
3603 rctl
|= (E1000_RCTL_SBP
| /* Receive bad packets */
3604 E1000_RCTL_BAM
| /* RX All Bcast Pkts */
3605 E1000_RCTL_PMCF
); /* RX All MAC Ctrl Pkts */
3607 rctl
&= ~(E1000_RCTL_DPF
| /* Allow filtered pause */
3608 E1000_RCTL_CFIEN
); /* Dis VLAN CFIEN Filter */
3609 /* Do not mess with E1000_CTRL_VME, it affects transmit as well,
3610 * and that breaks VLANs.
3614 wr32(E1000_RCTL
, rctl
);
3617 static inline int igb_set_vf_rlpml(struct igb_adapter
*adapter
, int size
,
3620 struct e1000_hw
*hw
= &adapter
->hw
;
3623 if (size
> MAX_JUMBO_FRAME_SIZE
)
3624 size
= MAX_JUMBO_FRAME_SIZE
;
3626 vmolr
= rd32(E1000_VMOLR(vfn
));
3627 vmolr
&= ~E1000_VMOLR_RLPML_MASK
;
3628 vmolr
|= size
| E1000_VMOLR_LPE
;
3629 wr32(E1000_VMOLR(vfn
), vmolr
);
3634 static inline void igb_set_vf_vlan_strip(struct igb_adapter
*adapter
,
3635 int vfn
, bool enable
)
3637 struct e1000_hw
*hw
= &adapter
->hw
;
3640 if (hw
->mac
.type
< e1000_82576
)
3643 if (hw
->mac
.type
== e1000_i350
)
3644 reg
= E1000_DVMOLR(vfn
);
3646 reg
= E1000_VMOLR(vfn
);
3650 val
|= E1000_VMOLR_STRVLAN
;
3652 val
&= ~(E1000_VMOLR_STRVLAN
);
3656 static inline void igb_set_vmolr(struct igb_adapter
*adapter
,
3659 struct e1000_hw
*hw
= &adapter
->hw
;
3662 /* This register exists only on 82576 and newer so if we are older then
3663 * we should exit and do nothing
3665 if (hw
->mac
.type
< e1000_82576
)
3668 vmolr
= rd32(E1000_VMOLR(vfn
));
3670 vmolr
|= E1000_VMOLR_AUPE
; /* Accept untagged packets */
3672 vmolr
&= ~(E1000_VMOLR_AUPE
); /* Tagged packets ONLY */
3674 /* clear all bits that might not be set */
3675 vmolr
&= ~(E1000_VMOLR_BAM
| E1000_VMOLR_RSSE
);
3677 if (adapter
->rss_queues
> 1 && vfn
== adapter
->vfs_allocated_count
)
3678 vmolr
|= E1000_VMOLR_RSSE
; /* enable RSS */
3679 /* for VMDq only allow the VFs and pool 0 to accept broadcast and
3682 if (vfn
<= adapter
->vfs_allocated_count
)
3683 vmolr
|= E1000_VMOLR_BAM
; /* Accept broadcast */
3685 wr32(E1000_VMOLR(vfn
), vmolr
);
3689 * igb_configure_rx_ring - Configure a receive ring after Reset
3690 * @adapter: board private structure
3691 * @ring: receive ring to be configured
3693 * Configure the Rx unit of the MAC after a reset.
3695 void igb_configure_rx_ring(struct igb_adapter
*adapter
,
3696 struct igb_ring
*ring
)
3698 struct e1000_hw
*hw
= &adapter
->hw
;
3699 u64 rdba
= ring
->dma
;
3700 int reg_idx
= ring
->reg_idx
;
3701 u32 srrctl
= 0, rxdctl
= 0;
3703 /* disable the queue */
3704 wr32(E1000_RXDCTL(reg_idx
), 0);
3706 /* Set DMA base address registers */
3707 wr32(E1000_RDBAL(reg_idx
),
3708 rdba
& 0x00000000ffffffffULL
);
3709 wr32(E1000_RDBAH(reg_idx
), rdba
>> 32);
3710 wr32(E1000_RDLEN(reg_idx
),
3711 ring
->count
* sizeof(union e1000_adv_rx_desc
));
3713 /* initialize head and tail */
3714 ring
->tail
= hw
->hw_addr
+ E1000_RDT(reg_idx
);
3715 wr32(E1000_RDH(reg_idx
), 0);
3716 writel(0, ring
->tail
);
3718 /* set descriptor configuration */
3719 srrctl
= IGB_RX_HDR_LEN
<< E1000_SRRCTL_BSIZEHDRSIZE_SHIFT
;
3720 srrctl
|= IGB_RX_BUFSZ
>> E1000_SRRCTL_BSIZEPKT_SHIFT
;
3721 srrctl
|= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF
;
3722 if (hw
->mac
.type
>= e1000_82580
)
3723 srrctl
|= E1000_SRRCTL_TIMESTAMP
;
3724 /* Only set Drop Enable if we are supporting multiple queues */
3725 if (adapter
->vfs_allocated_count
|| adapter
->num_rx_queues
> 1)
3726 srrctl
|= E1000_SRRCTL_DROP_EN
;
3728 wr32(E1000_SRRCTL(reg_idx
), srrctl
);
3730 /* set filtering for VMDQ pools */
3731 igb_set_vmolr(adapter
, reg_idx
& 0x7, true);
3733 rxdctl
|= IGB_RX_PTHRESH
;
3734 rxdctl
|= IGB_RX_HTHRESH
<< 8;
3735 rxdctl
|= IGB_RX_WTHRESH
<< 16;
3737 /* enable receive descriptor fetching */
3738 rxdctl
|= E1000_RXDCTL_QUEUE_ENABLE
;
3739 wr32(E1000_RXDCTL(reg_idx
), rxdctl
);
3743 * igb_configure_rx - Configure receive Unit after Reset
3744 * @adapter: board private structure
3746 * Configure the Rx unit of the MAC after a reset.
3748 static void igb_configure_rx(struct igb_adapter
*adapter
)
3752 /* set the correct pool for the PF default MAC address in entry 0 */
3753 igb_rar_set_qsel(adapter
, adapter
->hw
.mac
.addr
, 0,
3754 adapter
->vfs_allocated_count
);
3756 /* Setup the HW Rx Head and Tail Descriptor Pointers and
3757 * the Base and Length of the Rx Descriptor Ring
3759 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
3760 igb_configure_rx_ring(adapter
, adapter
->rx_ring
[i
]);
3764 * igb_free_tx_resources - Free Tx Resources per Queue
3765 * @tx_ring: Tx descriptor ring for a specific queue
3767 * Free all transmit software resources
3769 void igb_free_tx_resources(struct igb_ring
*tx_ring
)
3771 igb_clean_tx_ring(tx_ring
);
3773 vfree(tx_ring
->tx_buffer_info
);
3774 tx_ring
->tx_buffer_info
= NULL
;
3776 /* if not set, then don't free */
3780 dma_free_coherent(tx_ring
->dev
, tx_ring
->size
,
3781 tx_ring
->desc
, tx_ring
->dma
);
3783 tx_ring
->desc
= NULL
;
3787 * igb_free_all_tx_resources - Free Tx Resources for All Queues
3788 * @adapter: board private structure
3790 * Free all transmit software resources
3792 static void igb_free_all_tx_resources(struct igb_adapter
*adapter
)
3796 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
3797 if (adapter
->tx_ring
[i
])
3798 igb_free_tx_resources(adapter
->tx_ring
[i
]);
3801 void igb_unmap_and_free_tx_resource(struct igb_ring
*ring
,
3802 struct igb_tx_buffer
*tx_buffer
)
3804 if (tx_buffer
->skb
) {
3805 dev_kfree_skb_any(tx_buffer
->skb
);
3806 if (dma_unmap_len(tx_buffer
, len
))
3807 dma_unmap_single(ring
->dev
,
3808 dma_unmap_addr(tx_buffer
, dma
),
3809 dma_unmap_len(tx_buffer
, len
),
3811 } else if (dma_unmap_len(tx_buffer
, len
)) {
3812 dma_unmap_page(ring
->dev
,
3813 dma_unmap_addr(tx_buffer
, dma
),
3814 dma_unmap_len(tx_buffer
, len
),
3817 tx_buffer
->next_to_watch
= NULL
;
3818 tx_buffer
->skb
= NULL
;
3819 dma_unmap_len_set(tx_buffer
, len
, 0);
3820 /* buffer_info must be completely set up in the transmit path */
3824 * igb_clean_tx_ring - Free Tx Buffers
3825 * @tx_ring: ring to be cleaned
3827 static void igb_clean_tx_ring(struct igb_ring
*tx_ring
)
3829 struct igb_tx_buffer
*buffer_info
;
3833 if (!tx_ring
->tx_buffer_info
)
3835 /* Free all the Tx ring sk_buffs */
3837 for (i
= 0; i
< tx_ring
->count
; i
++) {
3838 buffer_info
= &tx_ring
->tx_buffer_info
[i
];
3839 igb_unmap_and_free_tx_resource(tx_ring
, buffer_info
);
3842 netdev_tx_reset_queue(txring_txq(tx_ring
));
3844 size
= sizeof(struct igb_tx_buffer
) * tx_ring
->count
;
3845 memset(tx_ring
->tx_buffer_info
, 0, size
);
3847 /* Zero out the descriptor ring */
3848 memset(tx_ring
->desc
, 0, tx_ring
->size
);
3850 tx_ring
->next_to_use
= 0;
3851 tx_ring
->next_to_clean
= 0;
3855 * igb_clean_all_tx_rings - Free Tx Buffers for all queues
3856 * @adapter: board private structure
3858 static void igb_clean_all_tx_rings(struct igb_adapter
*adapter
)
3862 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
3863 if (adapter
->tx_ring
[i
])
3864 igb_clean_tx_ring(adapter
->tx_ring
[i
]);
3868 * igb_free_rx_resources - Free Rx Resources
3869 * @rx_ring: ring to clean the resources from
3871 * Free all receive software resources
3873 void igb_free_rx_resources(struct igb_ring
*rx_ring
)
3875 igb_clean_rx_ring(rx_ring
);
3877 vfree(rx_ring
->rx_buffer_info
);
3878 rx_ring
->rx_buffer_info
= NULL
;
3880 /* if not set, then don't free */
3884 dma_free_coherent(rx_ring
->dev
, rx_ring
->size
,
3885 rx_ring
->desc
, rx_ring
->dma
);
3887 rx_ring
->desc
= NULL
;
3891 * igb_free_all_rx_resources - Free Rx Resources for All Queues
3892 * @adapter: board private structure
3894 * Free all receive software resources
3896 static void igb_free_all_rx_resources(struct igb_adapter
*adapter
)
3900 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
3901 if (adapter
->rx_ring
[i
])
3902 igb_free_rx_resources(adapter
->rx_ring
[i
]);
3906 * igb_clean_rx_ring - Free Rx Buffers per Queue
3907 * @rx_ring: ring to free buffers from
3909 static void igb_clean_rx_ring(struct igb_ring
*rx_ring
)
3915 dev_kfree_skb(rx_ring
->skb
);
3916 rx_ring
->skb
= NULL
;
3918 if (!rx_ring
->rx_buffer_info
)
3921 /* Free all the Rx ring sk_buffs */
3922 for (i
= 0; i
< rx_ring
->count
; i
++) {
3923 struct igb_rx_buffer
*buffer_info
= &rx_ring
->rx_buffer_info
[i
];
3925 if (!buffer_info
->page
)
3928 dma_unmap_page(rx_ring
->dev
,
3932 __free_page(buffer_info
->page
);
3934 buffer_info
->page
= NULL
;
3937 size
= sizeof(struct igb_rx_buffer
) * rx_ring
->count
;
3938 memset(rx_ring
->rx_buffer_info
, 0, size
);
3940 /* Zero out the descriptor ring */
3941 memset(rx_ring
->desc
, 0, rx_ring
->size
);
3943 rx_ring
->next_to_alloc
= 0;
3944 rx_ring
->next_to_clean
= 0;
3945 rx_ring
->next_to_use
= 0;
3949 * igb_clean_all_rx_rings - Free Rx Buffers for all queues
3950 * @adapter: board private structure
3952 static void igb_clean_all_rx_rings(struct igb_adapter
*adapter
)
3956 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
3957 if (adapter
->rx_ring
[i
])
3958 igb_clean_rx_ring(adapter
->rx_ring
[i
]);
3962 * igb_set_mac - Change the Ethernet Address of the NIC
3963 * @netdev: network interface device structure
3964 * @p: pointer to an address structure
3966 * Returns 0 on success, negative on failure
3968 static int igb_set_mac(struct net_device
*netdev
, void *p
)
3970 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3971 struct e1000_hw
*hw
= &adapter
->hw
;
3972 struct sockaddr
*addr
= p
;
3974 if (!is_valid_ether_addr(addr
->sa_data
))
3975 return -EADDRNOTAVAIL
;
3977 memcpy(netdev
->dev_addr
, addr
->sa_data
, netdev
->addr_len
);
3978 memcpy(hw
->mac
.addr
, addr
->sa_data
, netdev
->addr_len
);
3980 /* set the correct pool for the new PF MAC address in entry 0 */
3981 igb_rar_set_qsel(adapter
, hw
->mac
.addr
, 0,
3982 adapter
->vfs_allocated_count
);
3988 * igb_write_mc_addr_list - write multicast addresses to MTA
3989 * @netdev: network interface device structure
3991 * Writes multicast address list to the MTA hash table.
3992 * Returns: -ENOMEM on failure
3993 * 0 on no addresses written
3994 * X on writing X addresses to MTA
3996 static int igb_write_mc_addr_list(struct net_device
*netdev
)
3998 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3999 struct e1000_hw
*hw
= &adapter
->hw
;
4000 struct netdev_hw_addr
*ha
;
4004 if (netdev_mc_empty(netdev
)) {
4005 /* nothing to program, so clear mc list */
4006 igb_update_mc_addr_list(hw
, NULL
, 0);
4007 igb_restore_vf_multicasts(adapter
);
4011 mta_list
= kzalloc(netdev_mc_count(netdev
) * 6, GFP_ATOMIC
);
4015 /* The shared function expects a packed array of only addresses. */
4017 netdev_for_each_mc_addr(ha
, netdev
)
4018 memcpy(mta_list
+ (i
++ * ETH_ALEN
), ha
->addr
, ETH_ALEN
);
4020 igb_update_mc_addr_list(hw
, mta_list
, i
);
4023 return netdev_mc_count(netdev
);
4027 * igb_write_uc_addr_list - write unicast addresses to RAR table
4028 * @netdev: network interface device structure
4030 * Writes unicast address list to the RAR table.
4031 * Returns: -ENOMEM on failure/insufficient address space
4032 * 0 on no addresses written
4033 * X on writing X addresses to the RAR table
4035 static int igb_write_uc_addr_list(struct net_device
*netdev
)
4037 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4038 struct e1000_hw
*hw
= &adapter
->hw
;
4039 unsigned int vfn
= adapter
->vfs_allocated_count
;
4040 unsigned int rar_entries
= hw
->mac
.rar_entry_count
- (vfn
+ 1);
4043 /* return ENOMEM indicating insufficient memory for addresses */
4044 if (netdev_uc_count(netdev
) > rar_entries
)
4047 if (!netdev_uc_empty(netdev
) && rar_entries
) {
4048 struct netdev_hw_addr
*ha
;
4050 netdev_for_each_uc_addr(ha
, netdev
) {
4053 igb_rar_set_qsel(adapter
, ha
->addr
,
4059 /* write the addresses in reverse order to avoid write combining */
4060 for (; rar_entries
> 0 ; rar_entries
--) {
4061 wr32(E1000_RAH(rar_entries
), 0);
4062 wr32(E1000_RAL(rar_entries
), 0);
4069 static int igb_vlan_promisc_enable(struct igb_adapter
*adapter
)
4071 struct e1000_hw
*hw
= &adapter
->hw
;
4074 switch (hw
->mac
.type
) {
4078 /* VLAN filtering needed for VLAN prio filter */
4079 if (adapter
->netdev
->features
& NETIF_F_NTUPLE
)
4085 /* VLAN filtering needed for pool filtering */
4086 if (adapter
->vfs_allocated_count
)
4093 /* We are already in VLAN promisc, nothing to do */
4094 if (adapter
->flags
& IGB_FLAG_VLAN_PROMISC
)
4097 if (!adapter
->vfs_allocated_count
)
4100 /* Add PF to all active pools */
4101 pf_id
= adapter
->vfs_allocated_count
+ E1000_VLVF_POOLSEL_SHIFT
;
4103 for (i
= E1000_VLVF_ARRAY_SIZE
; --i
;) {
4104 u32 vlvf
= rd32(E1000_VLVF(i
));
4107 wr32(E1000_VLVF(i
), vlvf
);
4111 /* Set all bits in the VLAN filter table array */
4112 for (i
= E1000_VLAN_FILTER_TBL_SIZE
; i
--;)
4113 hw
->mac
.ops
.write_vfta(hw
, i
, ~0U);
4115 /* Set flag so we don't redo unnecessary work */
4116 adapter
->flags
|= IGB_FLAG_VLAN_PROMISC
;
4121 #define VFTA_BLOCK_SIZE 8
4122 static void igb_scrub_vfta(struct igb_adapter
*adapter
, u32 vfta_offset
)
4124 struct e1000_hw
*hw
= &adapter
->hw
;
4125 u32 vfta
[VFTA_BLOCK_SIZE
] = { 0 };
4126 u32 vid_start
= vfta_offset
* 32;
4127 u32 vid_end
= vid_start
+ (VFTA_BLOCK_SIZE
* 32);
4128 u32 i
, vid
, word
, bits
, pf_id
;
4130 /* guarantee that we don't scrub out management VLAN */
4131 vid
= adapter
->mng_vlan_id
;
4132 if (vid
>= vid_start
&& vid
< vid_end
)
4133 vfta
[(vid
- vid_start
) / 32] |= BIT(vid
% 32);
4135 if (!adapter
->vfs_allocated_count
)
4138 pf_id
= adapter
->vfs_allocated_count
+ E1000_VLVF_POOLSEL_SHIFT
;
4140 for (i
= E1000_VLVF_ARRAY_SIZE
; --i
;) {
4141 u32 vlvf
= rd32(E1000_VLVF(i
));
4143 /* pull VLAN ID from VLVF */
4144 vid
= vlvf
& VLAN_VID_MASK
;
4146 /* only concern ourselves with a certain range */
4147 if (vid
< vid_start
|| vid
>= vid_end
)
4150 if (vlvf
& E1000_VLVF_VLANID_ENABLE
) {
4151 /* record VLAN ID in VFTA */
4152 vfta
[(vid
- vid_start
) / 32] |= BIT(vid
% 32);
4154 /* if PF is part of this then continue */
4155 if (test_bit(vid
, adapter
->active_vlans
))
4159 /* remove PF from the pool */
4161 bits
&= rd32(E1000_VLVF(i
));
4162 wr32(E1000_VLVF(i
), bits
);
4166 /* extract values from active_vlans and write back to VFTA */
4167 for (i
= VFTA_BLOCK_SIZE
; i
--;) {
4168 vid
= (vfta_offset
+ i
) * 32;
4169 word
= vid
/ BITS_PER_LONG
;
4170 bits
= vid
% BITS_PER_LONG
;
4172 vfta
[i
] |= adapter
->active_vlans
[word
] >> bits
;
4174 hw
->mac
.ops
.write_vfta(hw
, vfta_offset
+ i
, vfta
[i
]);
4178 static void igb_vlan_promisc_disable(struct igb_adapter
*adapter
)
4182 /* We are not in VLAN promisc, nothing to do */
4183 if (!(adapter
->flags
& IGB_FLAG_VLAN_PROMISC
))
4186 /* Set flag so we don't redo unnecessary work */
4187 adapter
->flags
&= ~IGB_FLAG_VLAN_PROMISC
;
4189 for (i
= 0; i
< E1000_VLAN_FILTER_TBL_SIZE
; i
+= VFTA_BLOCK_SIZE
)
4190 igb_scrub_vfta(adapter
, i
);
4194 * igb_set_rx_mode - Secondary Unicast, Multicast and Promiscuous mode set
4195 * @netdev: network interface device structure
4197 * The set_rx_mode entry point is called whenever the unicast or multicast
4198 * address lists or the network interface flags are updated. This routine is
4199 * responsible for configuring the hardware for proper unicast, multicast,
4200 * promiscuous mode, and all-multi behavior.
4202 static void igb_set_rx_mode(struct net_device
*netdev
)
4204 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4205 struct e1000_hw
*hw
= &adapter
->hw
;
4206 unsigned int vfn
= adapter
->vfs_allocated_count
;
4207 u32 rctl
= 0, vmolr
= 0;
4210 /* Check for Promiscuous and All Multicast modes */
4211 if (netdev
->flags
& IFF_PROMISC
) {
4212 rctl
|= E1000_RCTL_UPE
| E1000_RCTL_MPE
;
4213 vmolr
|= E1000_VMOLR_MPME
;
4215 /* enable use of UTA filter to force packets to default pool */
4216 if (hw
->mac
.type
== e1000_82576
)
4217 vmolr
|= E1000_VMOLR_ROPE
;
4219 if (netdev
->flags
& IFF_ALLMULTI
) {
4220 rctl
|= E1000_RCTL_MPE
;
4221 vmolr
|= E1000_VMOLR_MPME
;
4223 /* Write addresses to the MTA, if the attempt fails
4224 * then we should just turn on promiscuous mode so
4225 * that we can at least receive multicast traffic
4227 count
= igb_write_mc_addr_list(netdev
);
4229 rctl
|= E1000_RCTL_MPE
;
4230 vmolr
|= E1000_VMOLR_MPME
;
4232 vmolr
|= E1000_VMOLR_ROMPE
;
4237 /* Write addresses to available RAR registers, if there is not
4238 * sufficient space to store all the addresses then enable
4239 * unicast promiscuous mode
4241 count
= igb_write_uc_addr_list(netdev
);
4243 rctl
|= E1000_RCTL_UPE
;
4244 vmolr
|= E1000_VMOLR_ROPE
;
4247 /* enable VLAN filtering by default */
4248 rctl
|= E1000_RCTL_VFE
;
4250 /* disable VLAN filtering for modes that require it */
4251 if ((netdev
->flags
& IFF_PROMISC
) ||
4252 (netdev
->features
& NETIF_F_RXALL
)) {
4253 /* if we fail to set all rules then just clear VFE */
4254 if (igb_vlan_promisc_enable(adapter
))
4255 rctl
&= ~E1000_RCTL_VFE
;
4257 igb_vlan_promisc_disable(adapter
);
4260 /* update state of unicast, multicast, and VLAN filtering modes */
4261 rctl
|= rd32(E1000_RCTL
) & ~(E1000_RCTL_UPE
| E1000_RCTL_MPE
|
4263 wr32(E1000_RCTL
, rctl
);
4265 /* In order to support SR-IOV and eventually VMDq it is necessary to set
4266 * the VMOLR to enable the appropriate modes. Without this workaround
4267 * we will have issues with VLAN tag stripping not being done for frames
4268 * that are only arriving because we are the default pool
4270 if ((hw
->mac
.type
< e1000_82576
) || (hw
->mac
.type
> e1000_i350
))
4273 /* set UTA to appropriate mode */
4274 igb_set_uta(adapter
, !!(vmolr
& E1000_VMOLR_ROPE
));
4276 vmolr
|= rd32(E1000_VMOLR(vfn
)) &
4277 ~(E1000_VMOLR_ROPE
| E1000_VMOLR_MPME
| E1000_VMOLR_ROMPE
);
4279 /* enable Rx jumbo frames, no need for restriction */
4280 vmolr
&= ~E1000_VMOLR_RLPML_MASK
;
4281 vmolr
|= MAX_JUMBO_FRAME_SIZE
| E1000_VMOLR_LPE
;
4283 wr32(E1000_VMOLR(vfn
), vmolr
);
4284 wr32(E1000_RLPML
, MAX_JUMBO_FRAME_SIZE
);
4286 igb_restore_vf_multicasts(adapter
);
4289 static void igb_check_wvbr(struct igb_adapter
*adapter
)
4291 struct e1000_hw
*hw
= &adapter
->hw
;
4294 switch (hw
->mac
.type
) {
4297 wvbr
= rd32(E1000_WVBR
);
4305 adapter
->wvbr
|= wvbr
;
4308 #define IGB_STAGGERED_QUEUE_OFFSET 8
4310 static void igb_spoof_check(struct igb_adapter
*adapter
)
4317 for (j
= 0; j
< adapter
->vfs_allocated_count
; j
++) {
4318 if (adapter
->wvbr
& BIT(j
) ||
4319 adapter
->wvbr
& BIT(j
+ IGB_STAGGERED_QUEUE_OFFSET
)) {
4320 dev_warn(&adapter
->pdev
->dev
,
4321 "Spoof event(s) detected on VF %d\n", j
);
4324 BIT(j
+ IGB_STAGGERED_QUEUE_OFFSET
));
4329 /* Need to wait a few seconds after link up to get diagnostic information from
4332 static void igb_update_phy_info(unsigned long data
)
4334 struct igb_adapter
*adapter
= (struct igb_adapter
*) data
;
4335 igb_get_phy_info(&adapter
->hw
);
4339 * igb_has_link - check shared code for link and determine up/down
4340 * @adapter: pointer to driver private info
4342 bool igb_has_link(struct igb_adapter
*adapter
)
4344 struct e1000_hw
*hw
= &adapter
->hw
;
4345 bool link_active
= false;
4347 /* get_link_status is set on LSC (link status) interrupt or
4348 * rx sequence error interrupt. get_link_status will stay
4349 * false until the e1000_check_for_link establishes link
4350 * for copper adapters ONLY
4352 switch (hw
->phy
.media_type
) {
4353 case e1000_media_type_copper
:
4354 if (!hw
->mac
.get_link_status
)
4356 case e1000_media_type_internal_serdes
:
4357 hw
->mac
.ops
.check_for_link(hw
);
4358 link_active
= !hw
->mac
.get_link_status
;
4361 case e1000_media_type_unknown
:
4365 if (((hw
->mac
.type
== e1000_i210
) ||
4366 (hw
->mac
.type
== e1000_i211
)) &&
4367 (hw
->phy
.id
== I210_I_PHY_ID
)) {
4368 if (!netif_carrier_ok(adapter
->netdev
)) {
4369 adapter
->flags
&= ~IGB_FLAG_NEED_LINK_UPDATE
;
4370 } else if (!(adapter
->flags
& IGB_FLAG_NEED_LINK_UPDATE
)) {
4371 adapter
->flags
|= IGB_FLAG_NEED_LINK_UPDATE
;
4372 adapter
->link_check_timeout
= jiffies
;
4379 static bool igb_thermal_sensor_event(struct e1000_hw
*hw
, u32 event
)
4382 u32 ctrl_ext
, thstat
;
4384 /* check for thermal sensor event on i350 copper only */
4385 if (hw
->mac
.type
== e1000_i350
) {
4386 thstat
= rd32(E1000_THSTAT
);
4387 ctrl_ext
= rd32(E1000_CTRL_EXT
);
4389 if ((hw
->phy
.media_type
== e1000_media_type_copper
) &&
4390 !(ctrl_ext
& E1000_CTRL_EXT_LINK_MODE_SGMII
))
4391 ret
= !!(thstat
& event
);
4398 * igb_check_lvmmc - check for malformed packets received
4399 * and indicated in LVMMC register
4400 * @adapter: pointer to adapter
4402 static void igb_check_lvmmc(struct igb_adapter
*adapter
)
4404 struct e1000_hw
*hw
= &adapter
->hw
;
4407 lvmmc
= rd32(E1000_LVMMC
);
4409 if (unlikely(net_ratelimit())) {
4410 netdev_warn(adapter
->netdev
,
4411 "malformed Tx packet detected and dropped, LVMMC:0x%08x\n",
4418 * igb_watchdog - Timer Call-back
4419 * @data: pointer to adapter cast into an unsigned long
4421 static void igb_watchdog(unsigned long data
)
4423 struct igb_adapter
*adapter
= (struct igb_adapter
*)data
;
4424 /* Do the rest outside of interrupt context */
4425 schedule_work(&adapter
->watchdog_task
);
4428 static void igb_watchdog_task(struct work_struct
*work
)
4430 struct igb_adapter
*adapter
= container_of(work
,
4433 struct e1000_hw
*hw
= &adapter
->hw
;
4434 struct e1000_phy_info
*phy
= &hw
->phy
;
4435 struct net_device
*netdev
= adapter
->netdev
;
4439 u16 phy_data
, retry_count
= 20;
4441 link
= igb_has_link(adapter
);
4443 if (adapter
->flags
& IGB_FLAG_NEED_LINK_UPDATE
) {
4444 if (time_after(jiffies
, (adapter
->link_check_timeout
+ HZ
)))
4445 adapter
->flags
&= ~IGB_FLAG_NEED_LINK_UPDATE
;
4450 /* Force link down if we have fiber to swap to */
4451 if (adapter
->flags
& IGB_FLAG_MAS_ENABLE
) {
4452 if (hw
->phy
.media_type
== e1000_media_type_copper
) {
4453 connsw
= rd32(E1000_CONNSW
);
4454 if (!(connsw
& E1000_CONNSW_AUTOSENSE_EN
))
4459 /* Perform a reset if the media type changed. */
4460 if (hw
->dev_spec
._82575
.media_changed
) {
4461 hw
->dev_spec
._82575
.media_changed
= false;
4462 adapter
->flags
|= IGB_FLAG_MEDIA_RESET
;
4465 /* Cancel scheduled suspend requests. */
4466 pm_runtime_resume(netdev
->dev
.parent
);
4468 if (!netif_carrier_ok(netdev
)) {
4471 hw
->mac
.ops
.get_speed_and_duplex(hw
,
4472 &adapter
->link_speed
,
4473 &adapter
->link_duplex
);
4475 ctrl
= rd32(E1000_CTRL
);
4476 /* Links status message must follow this format */
4478 "igb: %s NIC Link is Up %d Mbps %s Duplex, Flow Control: %s\n",
4480 adapter
->link_speed
,
4481 adapter
->link_duplex
== FULL_DUPLEX
?
4483 (ctrl
& E1000_CTRL_TFCE
) &&
4484 (ctrl
& E1000_CTRL_RFCE
) ? "RX/TX" :
4485 (ctrl
& E1000_CTRL_RFCE
) ? "RX" :
4486 (ctrl
& E1000_CTRL_TFCE
) ? "TX" : "None");
4488 /* disable EEE if enabled */
4489 if ((adapter
->flags
& IGB_FLAG_EEE
) &&
4490 (adapter
->link_duplex
== HALF_DUPLEX
)) {
4491 dev_info(&adapter
->pdev
->dev
,
4492 "EEE Disabled: unsupported at half duplex. Re-enable using ethtool when at full duplex.\n");
4493 adapter
->hw
.dev_spec
._82575
.eee_disable
= true;
4494 adapter
->flags
&= ~IGB_FLAG_EEE
;
4497 /* check if SmartSpeed worked */
4498 igb_check_downshift(hw
);
4499 if (phy
->speed_downgraded
)
4500 netdev_warn(netdev
, "Link Speed was downgraded by SmartSpeed\n");
4502 /* check for thermal sensor event */
4503 if (igb_thermal_sensor_event(hw
,
4504 E1000_THSTAT_LINK_THROTTLE
))
4505 netdev_info(netdev
, "The network adapter link speed was downshifted because it overheated\n");
4507 /* adjust timeout factor according to speed/duplex */
4508 adapter
->tx_timeout_factor
= 1;
4509 switch (adapter
->link_speed
) {
4511 adapter
->tx_timeout_factor
= 14;
4514 /* maybe add some timeout factor ? */
4518 if (adapter
->link_speed
!= SPEED_1000
)
4521 /* wait for Remote receiver status OK */
4523 if (!igb_read_phy_reg(hw
, PHY_1000T_STATUS
,
4525 if (!(phy_data
& SR_1000T_REMOTE_RX_STATUS
) &&
4529 goto retry_read_status
;
4530 } else if (!retry_count
) {
4531 dev_err(&adapter
->pdev
->dev
, "exceed max 2 second\n");
4534 dev_err(&adapter
->pdev
->dev
, "read 1000Base-T Status Reg\n");
4537 netif_carrier_on(netdev
);
4539 igb_ping_all_vfs(adapter
);
4540 igb_check_vf_rate_limit(adapter
);
4542 /* link state has changed, schedule phy info update */
4543 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
4544 mod_timer(&adapter
->phy_info_timer
,
4545 round_jiffies(jiffies
+ 2 * HZ
));
4548 if (netif_carrier_ok(netdev
)) {
4549 adapter
->link_speed
= 0;
4550 adapter
->link_duplex
= 0;
4552 /* check for thermal sensor event */
4553 if (igb_thermal_sensor_event(hw
,
4554 E1000_THSTAT_PWR_DOWN
)) {
4555 netdev_err(netdev
, "The network adapter was stopped because it overheated\n");
4558 /* Links status message must follow this format */
4559 netdev_info(netdev
, "igb: %s NIC Link is Down\n",
4561 netif_carrier_off(netdev
);
4563 igb_ping_all_vfs(adapter
);
4565 /* link state has changed, schedule phy info update */
4566 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
4567 mod_timer(&adapter
->phy_info_timer
,
4568 round_jiffies(jiffies
+ 2 * HZ
));
4570 /* link is down, time to check for alternate media */
4571 if (adapter
->flags
& IGB_FLAG_MAS_ENABLE
) {
4572 igb_check_swap_media(adapter
);
4573 if (adapter
->flags
& IGB_FLAG_MEDIA_RESET
) {
4574 schedule_work(&adapter
->reset_task
);
4575 /* return immediately */
4579 pm_schedule_suspend(netdev
->dev
.parent
,
4582 /* also check for alternate media here */
4583 } else if (!netif_carrier_ok(netdev
) &&
4584 (adapter
->flags
& IGB_FLAG_MAS_ENABLE
)) {
4585 igb_check_swap_media(adapter
);
4586 if (adapter
->flags
& IGB_FLAG_MEDIA_RESET
) {
4587 schedule_work(&adapter
->reset_task
);
4588 /* return immediately */
4594 spin_lock(&adapter
->stats64_lock
);
4595 igb_update_stats(adapter
, &adapter
->stats64
);
4596 spin_unlock(&adapter
->stats64_lock
);
4598 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
4599 struct igb_ring
*tx_ring
= adapter
->tx_ring
[i
];
4600 if (!netif_carrier_ok(netdev
)) {
4601 /* We've lost link, so the controller stops DMA,
4602 * but we've got queued Tx work that's never going
4603 * to get done, so reset controller to flush Tx.
4604 * (Do the reset outside of interrupt context).
4606 if (igb_desc_unused(tx_ring
) + 1 < tx_ring
->count
) {
4607 adapter
->tx_timeout_count
++;
4608 schedule_work(&adapter
->reset_task
);
4609 /* return immediately since reset is imminent */
4614 /* Force detection of hung controller every watchdog period */
4615 set_bit(IGB_RING_FLAG_TX_DETECT_HANG
, &tx_ring
->flags
);
4618 /* Cause software interrupt to ensure Rx ring is cleaned */
4619 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
) {
4622 for (i
= 0; i
< adapter
->num_q_vectors
; i
++)
4623 eics
|= adapter
->q_vector
[i
]->eims_value
;
4624 wr32(E1000_EICS
, eics
);
4626 wr32(E1000_ICS
, E1000_ICS_RXDMT0
);
4629 igb_spoof_check(adapter
);
4630 igb_ptp_rx_hang(adapter
);
4632 /* Check LVMMC register on i350/i354 only */
4633 if ((adapter
->hw
.mac
.type
== e1000_i350
) ||
4634 (adapter
->hw
.mac
.type
== e1000_i354
))
4635 igb_check_lvmmc(adapter
);
4637 /* Reset the timer */
4638 if (!test_bit(__IGB_DOWN
, &adapter
->state
)) {
4639 if (adapter
->flags
& IGB_FLAG_NEED_LINK_UPDATE
)
4640 mod_timer(&adapter
->watchdog_timer
,
4641 round_jiffies(jiffies
+ HZ
));
4643 mod_timer(&adapter
->watchdog_timer
,
4644 round_jiffies(jiffies
+ 2 * HZ
));
4648 enum latency_range
{
4652 latency_invalid
= 255
4656 * igb_update_ring_itr - update the dynamic ITR value based on packet size
4657 * @q_vector: pointer to q_vector
4659 * Stores a new ITR value based on strictly on packet size. This
4660 * algorithm is less sophisticated than that used in igb_update_itr,
4661 * due to the difficulty of synchronizing statistics across multiple
4662 * receive rings. The divisors and thresholds used by this function
4663 * were determined based on theoretical maximum wire speed and testing
4664 * data, in order to minimize response time while increasing bulk
4666 * This functionality is controlled by ethtool's coalescing settings.
4667 * NOTE: This function is called only when operating in a multiqueue
4668 * receive environment.
4670 static void igb_update_ring_itr(struct igb_q_vector
*q_vector
)
4672 int new_val
= q_vector
->itr_val
;
4673 int avg_wire_size
= 0;
4674 struct igb_adapter
*adapter
= q_vector
->adapter
;
4675 unsigned int packets
;
4677 /* For non-gigabit speeds, just fix the interrupt rate at 4000
4678 * ints/sec - ITR timer value of 120 ticks.
4680 if (adapter
->link_speed
!= SPEED_1000
) {
4681 new_val
= IGB_4K_ITR
;
4685 packets
= q_vector
->rx
.total_packets
;
4687 avg_wire_size
= q_vector
->rx
.total_bytes
/ packets
;
4689 packets
= q_vector
->tx
.total_packets
;
4691 avg_wire_size
= max_t(u32
, avg_wire_size
,
4692 q_vector
->tx
.total_bytes
/ packets
);
4694 /* if avg_wire_size isn't set no work was done */
4698 /* Add 24 bytes to size to account for CRC, preamble, and gap */
4699 avg_wire_size
+= 24;
4701 /* Don't starve jumbo frames */
4702 avg_wire_size
= min(avg_wire_size
, 3000);
4704 /* Give a little boost to mid-size frames */
4705 if ((avg_wire_size
> 300) && (avg_wire_size
< 1200))
4706 new_val
= avg_wire_size
/ 3;
4708 new_val
= avg_wire_size
/ 2;
4710 /* conservative mode (itr 3) eliminates the lowest_latency setting */
4711 if (new_val
< IGB_20K_ITR
&&
4712 ((q_vector
->rx
.ring
&& adapter
->rx_itr_setting
== 3) ||
4713 (!q_vector
->rx
.ring
&& adapter
->tx_itr_setting
== 3)))
4714 new_val
= IGB_20K_ITR
;
4717 if (new_val
!= q_vector
->itr_val
) {
4718 q_vector
->itr_val
= new_val
;
4719 q_vector
->set_itr
= 1;
4722 q_vector
->rx
.total_bytes
= 0;
4723 q_vector
->rx
.total_packets
= 0;
4724 q_vector
->tx
.total_bytes
= 0;
4725 q_vector
->tx
.total_packets
= 0;
4729 * igb_update_itr - update the dynamic ITR value based on statistics
4730 * @q_vector: pointer to q_vector
4731 * @ring_container: ring info to update the itr for
4733 * Stores a new ITR value based on packets and byte
4734 * counts during the last interrupt. The advantage of per interrupt
4735 * computation is faster updates and more accurate ITR for the current
4736 * traffic pattern. Constants in this function were computed
4737 * based on theoretical maximum wire speed and thresholds were set based
4738 * on testing data as well as attempting to minimize response time
4739 * while increasing bulk throughput.
4740 * This functionality is controlled by ethtool's coalescing settings.
4741 * NOTE: These calculations are only valid when operating in a single-
4742 * queue environment.
4744 static void igb_update_itr(struct igb_q_vector
*q_vector
,
4745 struct igb_ring_container
*ring_container
)
4747 unsigned int packets
= ring_container
->total_packets
;
4748 unsigned int bytes
= ring_container
->total_bytes
;
4749 u8 itrval
= ring_container
->itr
;
4751 /* no packets, exit with status unchanged */
4756 case lowest_latency
:
4757 /* handle TSO and jumbo frames */
4758 if (bytes
/packets
> 8000)
4759 itrval
= bulk_latency
;
4760 else if ((packets
< 5) && (bytes
> 512))
4761 itrval
= low_latency
;
4763 case low_latency
: /* 50 usec aka 20000 ints/s */
4764 if (bytes
> 10000) {
4765 /* this if handles the TSO accounting */
4766 if (bytes
/packets
> 8000)
4767 itrval
= bulk_latency
;
4768 else if ((packets
< 10) || ((bytes
/packets
) > 1200))
4769 itrval
= bulk_latency
;
4770 else if ((packets
> 35))
4771 itrval
= lowest_latency
;
4772 } else if (bytes
/packets
> 2000) {
4773 itrval
= bulk_latency
;
4774 } else if (packets
<= 2 && bytes
< 512) {
4775 itrval
= lowest_latency
;
4778 case bulk_latency
: /* 250 usec aka 4000 ints/s */
4779 if (bytes
> 25000) {
4781 itrval
= low_latency
;
4782 } else if (bytes
< 1500) {
4783 itrval
= low_latency
;
4788 /* clear work counters since we have the values we need */
4789 ring_container
->total_bytes
= 0;
4790 ring_container
->total_packets
= 0;
4792 /* write updated itr to ring container */
4793 ring_container
->itr
= itrval
;
4796 static void igb_set_itr(struct igb_q_vector
*q_vector
)
4798 struct igb_adapter
*adapter
= q_vector
->adapter
;
4799 u32 new_itr
= q_vector
->itr_val
;
4802 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
4803 if (adapter
->link_speed
!= SPEED_1000
) {
4805 new_itr
= IGB_4K_ITR
;
4809 igb_update_itr(q_vector
, &q_vector
->tx
);
4810 igb_update_itr(q_vector
, &q_vector
->rx
);
4812 current_itr
= max(q_vector
->rx
.itr
, q_vector
->tx
.itr
);
4814 /* conservative mode (itr 3) eliminates the lowest_latency setting */
4815 if (current_itr
== lowest_latency
&&
4816 ((q_vector
->rx
.ring
&& adapter
->rx_itr_setting
== 3) ||
4817 (!q_vector
->rx
.ring
&& adapter
->tx_itr_setting
== 3)))
4818 current_itr
= low_latency
;
4820 switch (current_itr
) {
4821 /* counts and packets in update_itr are dependent on these numbers */
4822 case lowest_latency
:
4823 new_itr
= IGB_70K_ITR
; /* 70,000 ints/sec */
4826 new_itr
= IGB_20K_ITR
; /* 20,000 ints/sec */
4829 new_itr
= IGB_4K_ITR
; /* 4,000 ints/sec */
4836 if (new_itr
!= q_vector
->itr_val
) {
4837 /* this attempts to bias the interrupt rate towards Bulk
4838 * by adding intermediate steps when interrupt rate is
4841 new_itr
= new_itr
> q_vector
->itr_val
?
4842 max((new_itr
* q_vector
->itr_val
) /
4843 (new_itr
+ (q_vector
->itr_val
>> 2)),
4845 /* Don't write the value here; it resets the adapter's
4846 * internal timer, and causes us to delay far longer than
4847 * we should between interrupts. Instead, we write the ITR
4848 * value at the beginning of the next interrupt so the timing
4849 * ends up being correct.
4851 q_vector
->itr_val
= new_itr
;
4852 q_vector
->set_itr
= 1;
4856 static void igb_tx_ctxtdesc(struct igb_ring
*tx_ring
, u32 vlan_macip_lens
,
4857 u32 type_tucmd
, u32 mss_l4len_idx
)
4859 struct e1000_adv_tx_context_desc
*context_desc
;
4860 u16 i
= tx_ring
->next_to_use
;
4862 context_desc
= IGB_TX_CTXTDESC(tx_ring
, i
);
4865 tx_ring
->next_to_use
= (i
< tx_ring
->count
) ? i
: 0;
4867 /* set bits to identify this as an advanced context descriptor */
4868 type_tucmd
|= E1000_TXD_CMD_DEXT
| E1000_ADVTXD_DTYP_CTXT
;
4870 /* For 82575, context index must be unique per ring. */
4871 if (test_bit(IGB_RING_FLAG_TX_CTX_IDX
, &tx_ring
->flags
))
4872 mss_l4len_idx
|= tx_ring
->reg_idx
<< 4;
4874 context_desc
->vlan_macip_lens
= cpu_to_le32(vlan_macip_lens
);
4875 context_desc
->seqnum_seed
= 0;
4876 context_desc
->type_tucmd_mlhl
= cpu_to_le32(type_tucmd
);
4877 context_desc
->mss_l4len_idx
= cpu_to_le32(mss_l4len_idx
);
4880 static int igb_tso(struct igb_ring
*tx_ring
,
4881 struct igb_tx_buffer
*first
,
4884 u32 vlan_macip_lens
, type_tucmd
, mss_l4len_idx
;
4885 struct sk_buff
*skb
= first
->skb
;
4895 u32 paylen
, l4_offset
;
4898 if (skb
->ip_summed
!= CHECKSUM_PARTIAL
)
4901 if (!skb_is_gso(skb
))
4904 err
= skb_cow_head(skb
, 0);
4908 ip
.hdr
= skb_network_header(skb
);
4909 l4
.hdr
= skb_checksum_start(skb
);
4911 /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
4912 type_tucmd
= E1000_ADVTXD_TUCMD_L4T_TCP
;
4914 /* initialize outer IP header fields */
4915 if (ip
.v4
->version
== 4) {
4916 /* IP header will have to cancel out any data that
4917 * is not a part of the outer IP header
4919 ip
.v4
->check
= csum_fold(csum_add(lco_csum(skb
),
4920 csum_unfold(l4
.tcp
->check
)));
4921 type_tucmd
|= E1000_ADVTXD_TUCMD_IPV4
;
4924 first
->tx_flags
|= IGB_TX_FLAGS_TSO
|
4928 ip
.v6
->payload_len
= 0;
4929 first
->tx_flags
|= IGB_TX_FLAGS_TSO
|
4933 /* determine offset of inner transport header */
4934 l4_offset
= l4
.hdr
- skb
->data
;
4936 /* compute length of segmentation header */
4937 *hdr_len
= (l4
.tcp
->doff
* 4) + l4_offset
;
4939 /* remove payload length from inner checksum */
4940 paylen
= skb
->len
- l4_offset
;
4941 csum_replace_by_diff(&l4
.tcp
->check
, htonl(paylen
));
4943 /* update gso size and bytecount with header size */
4944 first
->gso_segs
= skb_shinfo(skb
)->gso_segs
;
4945 first
->bytecount
+= (first
->gso_segs
- 1) * *hdr_len
;
4948 mss_l4len_idx
= (*hdr_len
- l4_offset
) << E1000_ADVTXD_L4LEN_SHIFT
;
4949 mss_l4len_idx
|= skb_shinfo(skb
)->gso_size
<< E1000_ADVTXD_MSS_SHIFT
;
4951 /* VLAN MACLEN IPLEN */
4952 vlan_macip_lens
= l4
.hdr
- ip
.hdr
;
4953 vlan_macip_lens
|= (ip
.hdr
- skb
->data
) << E1000_ADVTXD_MACLEN_SHIFT
;
4954 vlan_macip_lens
|= first
->tx_flags
& IGB_TX_FLAGS_VLAN_MASK
;
4956 igb_tx_ctxtdesc(tx_ring
, vlan_macip_lens
, type_tucmd
, mss_l4len_idx
);
4961 static inline bool igb_ipv6_csum_is_sctp(struct sk_buff
*skb
)
4963 unsigned int offset
= 0;
4965 ipv6_find_hdr(skb
, &offset
, IPPROTO_SCTP
, NULL
, NULL
);
4967 return offset
== skb_checksum_start_offset(skb
);
4970 static void igb_tx_csum(struct igb_ring
*tx_ring
, struct igb_tx_buffer
*first
)
4972 struct sk_buff
*skb
= first
->skb
;
4973 u32 vlan_macip_lens
= 0;
4976 if (skb
->ip_summed
!= CHECKSUM_PARTIAL
) {
4978 if (!(first
->tx_flags
& IGB_TX_FLAGS_VLAN
))
4983 switch (skb
->csum_offset
) {
4984 case offsetof(struct tcphdr
, check
):
4985 type_tucmd
= E1000_ADVTXD_TUCMD_L4T_TCP
;
4987 case offsetof(struct udphdr
, check
):
4989 case offsetof(struct sctphdr
, checksum
):
4990 /* validate that this is actually an SCTP request */
4991 if (((first
->protocol
== htons(ETH_P_IP
)) &&
4992 (ip_hdr(skb
)->protocol
== IPPROTO_SCTP
)) ||
4993 ((first
->protocol
== htons(ETH_P_IPV6
)) &&
4994 igb_ipv6_csum_is_sctp(skb
))) {
4995 type_tucmd
= E1000_ADVTXD_TUCMD_L4T_SCTP
;
4999 skb_checksum_help(skb
);
5003 /* update TX checksum flag */
5004 first
->tx_flags
|= IGB_TX_FLAGS_CSUM
;
5005 vlan_macip_lens
= skb_checksum_start_offset(skb
) -
5006 skb_network_offset(skb
);
5008 vlan_macip_lens
|= skb_network_offset(skb
) << E1000_ADVTXD_MACLEN_SHIFT
;
5009 vlan_macip_lens
|= first
->tx_flags
& IGB_TX_FLAGS_VLAN_MASK
;
5011 igb_tx_ctxtdesc(tx_ring
, vlan_macip_lens
, type_tucmd
, 0);
5014 #define IGB_SET_FLAG(_input, _flag, _result) \
5015 ((_flag <= _result) ? \
5016 ((u32)(_input & _flag) * (_result / _flag)) : \
5017 ((u32)(_input & _flag) / (_flag / _result)))
5019 static u32
igb_tx_cmd_type(struct sk_buff
*skb
, u32 tx_flags
)
5021 /* set type for advanced descriptor with frame checksum insertion */
5022 u32 cmd_type
= E1000_ADVTXD_DTYP_DATA
|
5023 E1000_ADVTXD_DCMD_DEXT
|
5024 E1000_ADVTXD_DCMD_IFCS
;
5026 /* set HW vlan bit if vlan is present */
5027 cmd_type
|= IGB_SET_FLAG(tx_flags
, IGB_TX_FLAGS_VLAN
,
5028 (E1000_ADVTXD_DCMD_VLE
));
5030 /* set segmentation bits for TSO */
5031 cmd_type
|= IGB_SET_FLAG(tx_flags
, IGB_TX_FLAGS_TSO
,
5032 (E1000_ADVTXD_DCMD_TSE
));
5034 /* set timestamp bit if present */
5035 cmd_type
|= IGB_SET_FLAG(tx_flags
, IGB_TX_FLAGS_TSTAMP
,
5036 (E1000_ADVTXD_MAC_TSTAMP
));
5038 /* insert frame checksum */
5039 cmd_type
^= IGB_SET_FLAG(skb
->no_fcs
, 1, E1000_ADVTXD_DCMD_IFCS
);
5044 static void igb_tx_olinfo_status(struct igb_ring
*tx_ring
,
5045 union e1000_adv_tx_desc
*tx_desc
,
5046 u32 tx_flags
, unsigned int paylen
)
5048 u32 olinfo_status
= paylen
<< E1000_ADVTXD_PAYLEN_SHIFT
;
5050 /* 82575 requires a unique index per ring */
5051 if (test_bit(IGB_RING_FLAG_TX_CTX_IDX
, &tx_ring
->flags
))
5052 olinfo_status
|= tx_ring
->reg_idx
<< 4;
5054 /* insert L4 checksum */
5055 olinfo_status
|= IGB_SET_FLAG(tx_flags
,
5057 (E1000_TXD_POPTS_TXSM
<< 8));
5059 /* insert IPv4 checksum */
5060 olinfo_status
|= IGB_SET_FLAG(tx_flags
,
5062 (E1000_TXD_POPTS_IXSM
<< 8));
5064 tx_desc
->read
.olinfo_status
= cpu_to_le32(olinfo_status
);
5067 static int __igb_maybe_stop_tx(struct igb_ring
*tx_ring
, const u16 size
)
5069 struct net_device
*netdev
= tx_ring
->netdev
;
5071 netif_stop_subqueue(netdev
, tx_ring
->queue_index
);
5073 /* Herbert's original patch had:
5074 * smp_mb__after_netif_stop_queue();
5075 * but since that doesn't exist yet, just open code it.
5079 /* We need to check again in a case another CPU has just
5080 * made room available.
5082 if (igb_desc_unused(tx_ring
) < size
)
5086 netif_wake_subqueue(netdev
, tx_ring
->queue_index
);
5088 u64_stats_update_begin(&tx_ring
->tx_syncp2
);
5089 tx_ring
->tx_stats
.restart_queue2
++;
5090 u64_stats_update_end(&tx_ring
->tx_syncp2
);
5095 static inline int igb_maybe_stop_tx(struct igb_ring
*tx_ring
, const u16 size
)
5097 if (igb_desc_unused(tx_ring
) >= size
)
5099 return __igb_maybe_stop_tx(tx_ring
, size
);
5102 static void igb_tx_map(struct igb_ring
*tx_ring
,
5103 struct igb_tx_buffer
*first
,
5106 struct sk_buff
*skb
= first
->skb
;
5107 struct igb_tx_buffer
*tx_buffer
;
5108 union e1000_adv_tx_desc
*tx_desc
;
5109 struct skb_frag_struct
*frag
;
5111 unsigned int data_len
, size
;
5112 u32 tx_flags
= first
->tx_flags
;
5113 u32 cmd_type
= igb_tx_cmd_type(skb
, tx_flags
);
5114 u16 i
= tx_ring
->next_to_use
;
5116 tx_desc
= IGB_TX_DESC(tx_ring
, i
);
5118 igb_tx_olinfo_status(tx_ring
, tx_desc
, tx_flags
, skb
->len
- hdr_len
);
5120 size
= skb_headlen(skb
);
5121 data_len
= skb
->data_len
;
5123 dma
= dma_map_single(tx_ring
->dev
, skb
->data
, size
, DMA_TO_DEVICE
);
5127 for (frag
= &skb_shinfo(skb
)->frags
[0];; frag
++) {
5128 if (dma_mapping_error(tx_ring
->dev
, dma
))
5131 /* record length, and DMA address */
5132 dma_unmap_len_set(tx_buffer
, len
, size
);
5133 dma_unmap_addr_set(tx_buffer
, dma
, dma
);
5135 tx_desc
->read
.buffer_addr
= cpu_to_le64(dma
);
5137 while (unlikely(size
> IGB_MAX_DATA_PER_TXD
)) {
5138 tx_desc
->read
.cmd_type_len
=
5139 cpu_to_le32(cmd_type
^ IGB_MAX_DATA_PER_TXD
);
5143 if (i
== tx_ring
->count
) {
5144 tx_desc
= IGB_TX_DESC(tx_ring
, 0);
5147 tx_desc
->read
.olinfo_status
= 0;
5149 dma
+= IGB_MAX_DATA_PER_TXD
;
5150 size
-= IGB_MAX_DATA_PER_TXD
;
5152 tx_desc
->read
.buffer_addr
= cpu_to_le64(dma
);
5155 if (likely(!data_len
))
5158 tx_desc
->read
.cmd_type_len
= cpu_to_le32(cmd_type
^ size
);
5162 if (i
== tx_ring
->count
) {
5163 tx_desc
= IGB_TX_DESC(tx_ring
, 0);
5166 tx_desc
->read
.olinfo_status
= 0;
5168 size
= skb_frag_size(frag
);
5171 dma
= skb_frag_dma_map(tx_ring
->dev
, frag
, 0,
5172 size
, DMA_TO_DEVICE
);
5174 tx_buffer
= &tx_ring
->tx_buffer_info
[i
];
5177 /* write last descriptor with RS and EOP bits */
5178 cmd_type
|= size
| IGB_TXD_DCMD
;
5179 tx_desc
->read
.cmd_type_len
= cpu_to_le32(cmd_type
);
5181 netdev_tx_sent_queue(txring_txq(tx_ring
), first
->bytecount
);
5183 /* set the timestamp */
5184 first
->time_stamp
= jiffies
;
5186 /* Force memory writes to complete before letting h/w know there
5187 * are new descriptors to fetch. (Only applicable for weak-ordered
5188 * memory model archs, such as IA-64).
5190 * We also need this memory barrier to make certain all of the
5191 * status bits have been updated before next_to_watch is written.
5195 /* set next_to_watch value indicating a packet is present */
5196 first
->next_to_watch
= tx_desc
;
5199 if (i
== tx_ring
->count
)
5202 tx_ring
->next_to_use
= i
;
5204 /* Make sure there is space in the ring for the next send. */
5205 igb_maybe_stop_tx(tx_ring
, DESC_NEEDED
);
5207 if (netif_xmit_stopped(txring_txq(tx_ring
)) || !skb
->xmit_more
) {
5208 writel(i
, tx_ring
->tail
);
5210 /* we need this if more than one processor can write to our tail
5211 * at a time, it synchronizes IO on IA64/Altix systems
5218 dev_err(tx_ring
->dev
, "TX DMA map failed\n");
5220 /* clear dma mappings for failed tx_buffer_info map */
5222 tx_buffer
= &tx_ring
->tx_buffer_info
[i
];
5223 igb_unmap_and_free_tx_resource(tx_ring
, tx_buffer
);
5224 if (tx_buffer
== first
)
5231 tx_ring
->next_to_use
= i
;
5234 netdev_tx_t
igb_xmit_frame_ring(struct sk_buff
*skb
,
5235 struct igb_ring
*tx_ring
)
5237 struct igb_tx_buffer
*first
;
5241 u16 count
= TXD_USE_COUNT(skb_headlen(skb
));
5242 __be16 protocol
= vlan_get_protocol(skb
);
5245 /* need: 1 descriptor per page * PAGE_SIZE/IGB_MAX_DATA_PER_TXD,
5246 * + 1 desc for skb_headlen/IGB_MAX_DATA_PER_TXD,
5247 * + 2 desc gap to keep tail from touching head,
5248 * + 1 desc for context descriptor,
5249 * otherwise try next time
5251 for (f
= 0; f
< skb_shinfo(skb
)->nr_frags
; f
++)
5252 count
+= TXD_USE_COUNT(skb_shinfo(skb
)->frags
[f
].size
);
5254 if (igb_maybe_stop_tx(tx_ring
, count
+ 3)) {
5255 /* this is a hard error */
5256 return NETDEV_TX_BUSY
;
5259 /* record the location of the first descriptor for this packet */
5260 first
= &tx_ring
->tx_buffer_info
[tx_ring
->next_to_use
];
5262 first
->bytecount
= skb
->len
;
5263 first
->gso_segs
= 1;
5265 if (unlikely(skb_shinfo(skb
)->tx_flags
& SKBTX_HW_TSTAMP
)) {
5266 struct igb_adapter
*adapter
= netdev_priv(tx_ring
->netdev
);
5268 if (!test_and_set_bit_lock(__IGB_PTP_TX_IN_PROGRESS
,
5270 skb_shinfo(skb
)->tx_flags
|= SKBTX_IN_PROGRESS
;
5271 tx_flags
|= IGB_TX_FLAGS_TSTAMP
;
5273 adapter
->ptp_tx_skb
= skb_get(skb
);
5274 adapter
->ptp_tx_start
= jiffies
;
5275 if (adapter
->hw
.mac
.type
== e1000_82576
)
5276 schedule_work(&adapter
->ptp_tx_work
);
5280 skb_tx_timestamp(skb
);
5282 if (skb_vlan_tag_present(skb
)) {
5283 tx_flags
|= IGB_TX_FLAGS_VLAN
;
5284 tx_flags
|= (skb_vlan_tag_get(skb
) << IGB_TX_FLAGS_VLAN_SHIFT
);
5287 /* record initial flags and protocol */
5288 first
->tx_flags
= tx_flags
;
5289 first
->protocol
= protocol
;
5291 tso
= igb_tso(tx_ring
, first
, &hdr_len
);
5295 igb_tx_csum(tx_ring
, first
);
5297 igb_tx_map(tx_ring
, first
, hdr_len
);
5299 return NETDEV_TX_OK
;
5302 igb_unmap_and_free_tx_resource(tx_ring
, first
);
5304 return NETDEV_TX_OK
;
5307 static inline struct igb_ring
*igb_tx_queue_mapping(struct igb_adapter
*adapter
,
5308 struct sk_buff
*skb
)
5310 unsigned int r_idx
= skb
->queue_mapping
;
5312 if (r_idx
>= adapter
->num_tx_queues
)
5313 r_idx
= r_idx
% adapter
->num_tx_queues
;
5315 return adapter
->tx_ring
[r_idx
];
5318 static netdev_tx_t
igb_xmit_frame(struct sk_buff
*skb
,
5319 struct net_device
*netdev
)
5321 struct igb_adapter
*adapter
= netdev_priv(netdev
);
5323 /* The minimum packet size with TCTL.PSP set is 17 so pad the skb
5324 * in order to meet this minimum size requirement.
5326 if (skb_put_padto(skb
, 17))
5327 return NETDEV_TX_OK
;
5329 return igb_xmit_frame_ring(skb
, igb_tx_queue_mapping(adapter
, skb
));
5333 * igb_tx_timeout - Respond to a Tx Hang
5334 * @netdev: network interface device structure
5336 static void igb_tx_timeout(struct net_device
*netdev
)
5338 struct igb_adapter
*adapter
= netdev_priv(netdev
);
5339 struct e1000_hw
*hw
= &adapter
->hw
;
5341 /* Do the reset outside of interrupt context */
5342 adapter
->tx_timeout_count
++;
5344 if (hw
->mac
.type
>= e1000_82580
)
5345 hw
->dev_spec
._82575
.global_device_reset
= true;
5347 schedule_work(&adapter
->reset_task
);
5349 (adapter
->eims_enable_mask
& ~adapter
->eims_other
));
5352 static void igb_reset_task(struct work_struct
*work
)
5354 struct igb_adapter
*adapter
;
5355 adapter
= container_of(work
, struct igb_adapter
, reset_task
);
5358 netdev_err(adapter
->netdev
, "Reset adapter\n");
5359 igb_reinit_locked(adapter
);
5363 * igb_get_stats64 - Get System Network Statistics
5364 * @netdev: network interface device structure
5365 * @stats: rtnl_link_stats64 pointer
5367 static struct rtnl_link_stats64
*igb_get_stats64(struct net_device
*netdev
,
5368 struct rtnl_link_stats64
*stats
)
5370 struct igb_adapter
*adapter
= netdev_priv(netdev
);
5372 spin_lock(&adapter
->stats64_lock
);
5373 igb_update_stats(adapter
, &adapter
->stats64
);
5374 memcpy(stats
, &adapter
->stats64
, sizeof(*stats
));
5375 spin_unlock(&adapter
->stats64_lock
);
5381 * igb_change_mtu - Change the Maximum Transfer Unit
5382 * @netdev: network interface device structure
5383 * @new_mtu: new value for maximum frame size
5385 * Returns 0 on success, negative on failure
5387 static int igb_change_mtu(struct net_device
*netdev
, int new_mtu
)
5389 struct igb_adapter
*adapter
= netdev_priv(netdev
);
5390 struct pci_dev
*pdev
= adapter
->pdev
;
5391 int max_frame
= new_mtu
+ ETH_HLEN
+ ETH_FCS_LEN
+ VLAN_HLEN
;
5393 if ((new_mtu
< 68) || (max_frame
> MAX_JUMBO_FRAME_SIZE
)) {
5394 dev_err(&pdev
->dev
, "Invalid MTU setting\n");
5398 #define MAX_STD_JUMBO_FRAME_SIZE 9238
5399 if (max_frame
> MAX_STD_JUMBO_FRAME_SIZE
) {
5400 dev_err(&pdev
->dev
, "MTU > 9216 not supported.\n");
5404 /* adjust max frame to be at least the size of a standard frame */
5405 if (max_frame
< (ETH_FRAME_LEN
+ ETH_FCS_LEN
))
5406 max_frame
= ETH_FRAME_LEN
+ ETH_FCS_LEN
;
5408 while (test_and_set_bit(__IGB_RESETTING
, &adapter
->state
))
5409 usleep_range(1000, 2000);
5411 /* igb_down has a dependency on max_frame_size */
5412 adapter
->max_frame_size
= max_frame
;
5414 if (netif_running(netdev
))
5417 dev_info(&pdev
->dev
, "changing MTU from %d to %d\n",
5418 netdev
->mtu
, new_mtu
);
5419 netdev
->mtu
= new_mtu
;
5421 if (netif_running(netdev
))
5426 clear_bit(__IGB_RESETTING
, &adapter
->state
);
5432 * igb_update_stats - Update the board statistics counters
5433 * @adapter: board private structure
5435 void igb_update_stats(struct igb_adapter
*adapter
,
5436 struct rtnl_link_stats64
*net_stats
)
5438 struct e1000_hw
*hw
= &adapter
->hw
;
5439 struct pci_dev
*pdev
= adapter
->pdev
;
5444 u64 _bytes
, _packets
;
5446 /* Prevent stats update while adapter is being reset, or if the pci
5447 * connection is down.
5449 if (adapter
->link_speed
== 0)
5451 if (pci_channel_offline(pdev
))
5458 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
5459 struct igb_ring
*ring
= adapter
->rx_ring
[i
];
5460 u32 rqdpc
= rd32(E1000_RQDPC(i
));
5461 if (hw
->mac
.type
>= e1000_i210
)
5462 wr32(E1000_RQDPC(i
), 0);
5465 ring
->rx_stats
.drops
+= rqdpc
;
5466 net_stats
->rx_fifo_errors
+= rqdpc
;
5470 start
= u64_stats_fetch_begin_irq(&ring
->rx_syncp
);
5471 _bytes
= ring
->rx_stats
.bytes
;
5472 _packets
= ring
->rx_stats
.packets
;
5473 } while (u64_stats_fetch_retry_irq(&ring
->rx_syncp
, start
));
5475 packets
+= _packets
;
5478 net_stats
->rx_bytes
= bytes
;
5479 net_stats
->rx_packets
= packets
;
5483 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
5484 struct igb_ring
*ring
= adapter
->tx_ring
[i
];
5486 start
= u64_stats_fetch_begin_irq(&ring
->tx_syncp
);
5487 _bytes
= ring
->tx_stats
.bytes
;
5488 _packets
= ring
->tx_stats
.packets
;
5489 } while (u64_stats_fetch_retry_irq(&ring
->tx_syncp
, start
));
5491 packets
+= _packets
;
5493 net_stats
->tx_bytes
= bytes
;
5494 net_stats
->tx_packets
= packets
;
5497 /* read stats registers */
5498 adapter
->stats
.crcerrs
+= rd32(E1000_CRCERRS
);
5499 adapter
->stats
.gprc
+= rd32(E1000_GPRC
);
5500 adapter
->stats
.gorc
+= rd32(E1000_GORCL
);
5501 rd32(E1000_GORCH
); /* clear GORCL */
5502 adapter
->stats
.bprc
+= rd32(E1000_BPRC
);
5503 adapter
->stats
.mprc
+= rd32(E1000_MPRC
);
5504 adapter
->stats
.roc
+= rd32(E1000_ROC
);
5506 adapter
->stats
.prc64
+= rd32(E1000_PRC64
);
5507 adapter
->stats
.prc127
+= rd32(E1000_PRC127
);
5508 adapter
->stats
.prc255
+= rd32(E1000_PRC255
);
5509 adapter
->stats
.prc511
+= rd32(E1000_PRC511
);
5510 adapter
->stats
.prc1023
+= rd32(E1000_PRC1023
);
5511 adapter
->stats
.prc1522
+= rd32(E1000_PRC1522
);
5512 adapter
->stats
.symerrs
+= rd32(E1000_SYMERRS
);
5513 adapter
->stats
.sec
+= rd32(E1000_SEC
);
5515 mpc
= rd32(E1000_MPC
);
5516 adapter
->stats
.mpc
+= mpc
;
5517 net_stats
->rx_fifo_errors
+= mpc
;
5518 adapter
->stats
.scc
+= rd32(E1000_SCC
);
5519 adapter
->stats
.ecol
+= rd32(E1000_ECOL
);
5520 adapter
->stats
.mcc
+= rd32(E1000_MCC
);
5521 adapter
->stats
.latecol
+= rd32(E1000_LATECOL
);
5522 adapter
->stats
.dc
+= rd32(E1000_DC
);
5523 adapter
->stats
.rlec
+= rd32(E1000_RLEC
);
5524 adapter
->stats
.xonrxc
+= rd32(E1000_XONRXC
);
5525 adapter
->stats
.xontxc
+= rd32(E1000_XONTXC
);
5526 adapter
->stats
.xoffrxc
+= rd32(E1000_XOFFRXC
);
5527 adapter
->stats
.xofftxc
+= rd32(E1000_XOFFTXC
);
5528 adapter
->stats
.fcruc
+= rd32(E1000_FCRUC
);
5529 adapter
->stats
.gptc
+= rd32(E1000_GPTC
);
5530 adapter
->stats
.gotc
+= rd32(E1000_GOTCL
);
5531 rd32(E1000_GOTCH
); /* clear GOTCL */
5532 adapter
->stats
.rnbc
+= rd32(E1000_RNBC
);
5533 adapter
->stats
.ruc
+= rd32(E1000_RUC
);
5534 adapter
->stats
.rfc
+= rd32(E1000_RFC
);
5535 adapter
->stats
.rjc
+= rd32(E1000_RJC
);
5536 adapter
->stats
.tor
+= rd32(E1000_TORH
);
5537 adapter
->stats
.tot
+= rd32(E1000_TOTH
);
5538 adapter
->stats
.tpr
+= rd32(E1000_TPR
);
5540 adapter
->stats
.ptc64
+= rd32(E1000_PTC64
);
5541 adapter
->stats
.ptc127
+= rd32(E1000_PTC127
);
5542 adapter
->stats
.ptc255
+= rd32(E1000_PTC255
);
5543 adapter
->stats
.ptc511
+= rd32(E1000_PTC511
);
5544 adapter
->stats
.ptc1023
+= rd32(E1000_PTC1023
);
5545 adapter
->stats
.ptc1522
+= rd32(E1000_PTC1522
);
5547 adapter
->stats
.mptc
+= rd32(E1000_MPTC
);
5548 adapter
->stats
.bptc
+= rd32(E1000_BPTC
);
5550 adapter
->stats
.tpt
+= rd32(E1000_TPT
);
5551 adapter
->stats
.colc
+= rd32(E1000_COLC
);
5553 adapter
->stats
.algnerrc
+= rd32(E1000_ALGNERRC
);
5554 /* read internal phy specific stats */
5555 reg
= rd32(E1000_CTRL_EXT
);
5556 if (!(reg
& E1000_CTRL_EXT_LINK_MODE_MASK
)) {
5557 adapter
->stats
.rxerrc
+= rd32(E1000_RXERRC
);
5559 /* this stat has invalid values on i210/i211 */
5560 if ((hw
->mac
.type
!= e1000_i210
) &&
5561 (hw
->mac
.type
!= e1000_i211
))
5562 adapter
->stats
.tncrs
+= rd32(E1000_TNCRS
);
5565 adapter
->stats
.tsctc
+= rd32(E1000_TSCTC
);
5566 adapter
->stats
.tsctfc
+= rd32(E1000_TSCTFC
);
5568 adapter
->stats
.iac
+= rd32(E1000_IAC
);
5569 adapter
->stats
.icrxoc
+= rd32(E1000_ICRXOC
);
5570 adapter
->stats
.icrxptc
+= rd32(E1000_ICRXPTC
);
5571 adapter
->stats
.icrxatc
+= rd32(E1000_ICRXATC
);
5572 adapter
->stats
.ictxptc
+= rd32(E1000_ICTXPTC
);
5573 adapter
->stats
.ictxatc
+= rd32(E1000_ICTXATC
);
5574 adapter
->stats
.ictxqec
+= rd32(E1000_ICTXQEC
);
5575 adapter
->stats
.ictxqmtc
+= rd32(E1000_ICTXQMTC
);
5576 adapter
->stats
.icrxdmtc
+= rd32(E1000_ICRXDMTC
);
5578 /* Fill out the OS statistics structure */
5579 net_stats
->multicast
= adapter
->stats
.mprc
;
5580 net_stats
->collisions
= adapter
->stats
.colc
;
5584 /* RLEC on some newer hardware can be incorrect so build
5585 * our own version based on RUC and ROC
5587 net_stats
->rx_errors
= adapter
->stats
.rxerrc
+
5588 adapter
->stats
.crcerrs
+ adapter
->stats
.algnerrc
+
5589 adapter
->stats
.ruc
+ adapter
->stats
.roc
+
5590 adapter
->stats
.cexterr
;
5591 net_stats
->rx_length_errors
= adapter
->stats
.ruc
+
5593 net_stats
->rx_crc_errors
= adapter
->stats
.crcerrs
;
5594 net_stats
->rx_frame_errors
= adapter
->stats
.algnerrc
;
5595 net_stats
->rx_missed_errors
= adapter
->stats
.mpc
;
5598 net_stats
->tx_errors
= adapter
->stats
.ecol
+
5599 adapter
->stats
.latecol
;
5600 net_stats
->tx_aborted_errors
= adapter
->stats
.ecol
;
5601 net_stats
->tx_window_errors
= adapter
->stats
.latecol
;
5602 net_stats
->tx_carrier_errors
= adapter
->stats
.tncrs
;
5604 /* Tx Dropped needs to be maintained elsewhere */
5606 /* Management Stats */
5607 adapter
->stats
.mgptc
+= rd32(E1000_MGTPTC
);
5608 adapter
->stats
.mgprc
+= rd32(E1000_MGTPRC
);
5609 adapter
->stats
.mgpdc
+= rd32(E1000_MGTPDC
);
5612 reg
= rd32(E1000_MANC
);
5613 if (reg
& E1000_MANC_EN_BMC2OS
) {
5614 adapter
->stats
.o2bgptc
+= rd32(E1000_O2BGPTC
);
5615 adapter
->stats
.o2bspc
+= rd32(E1000_O2BSPC
);
5616 adapter
->stats
.b2ospc
+= rd32(E1000_B2OSPC
);
5617 adapter
->stats
.b2ogprc
+= rd32(E1000_B2OGPRC
);
5621 static void igb_tsync_interrupt(struct igb_adapter
*adapter
)
5623 struct e1000_hw
*hw
= &adapter
->hw
;
5624 struct ptp_clock_event event
;
5625 struct timespec64 ts
;
5626 u32 ack
= 0, tsauxc
, sec
, nsec
, tsicr
= rd32(E1000_TSICR
);
5628 if (tsicr
& TSINTR_SYS_WRAP
) {
5629 event
.type
= PTP_CLOCK_PPS
;
5630 if (adapter
->ptp_caps
.pps
)
5631 ptp_clock_event(adapter
->ptp_clock
, &event
);
5633 dev_err(&adapter
->pdev
->dev
, "unexpected SYS WRAP");
5634 ack
|= TSINTR_SYS_WRAP
;
5637 if (tsicr
& E1000_TSICR_TXTS
) {
5638 /* retrieve hardware timestamp */
5639 schedule_work(&adapter
->ptp_tx_work
);
5640 ack
|= E1000_TSICR_TXTS
;
5643 if (tsicr
& TSINTR_TT0
) {
5644 spin_lock(&adapter
->tmreg_lock
);
5645 ts
= timespec64_add(adapter
->perout
[0].start
,
5646 adapter
->perout
[0].period
);
5647 /* u32 conversion of tv_sec is safe until y2106 */
5648 wr32(E1000_TRGTTIML0
, ts
.tv_nsec
);
5649 wr32(E1000_TRGTTIMH0
, (u32
)ts
.tv_sec
);
5650 tsauxc
= rd32(E1000_TSAUXC
);
5651 tsauxc
|= TSAUXC_EN_TT0
;
5652 wr32(E1000_TSAUXC
, tsauxc
);
5653 adapter
->perout
[0].start
= ts
;
5654 spin_unlock(&adapter
->tmreg_lock
);
5658 if (tsicr
& TSINTR_TT1
) {
5659 spin_lock(&adapter
->tmreg_lock
);
5660 ts
= timespec64_add(adapter
->perout
[1].start
,
5661 adapter
->perout
[1].period
);
5662 wr32(E1000_TRGTTIML1
, ts
.tv_nsec
);
5663 wr32(E1000_TRGTTIMH1
, (u32
)ts
.tv_sec
);
5664 tsauxc
= rd32(E1000_TSAUXC
);
5665 tsauxc
|= TSAUXC_EN_TT1
;
5666 wr32(E1000_TSAUXC
, tsauxc
);
5667 adapter
->perout
[1].start
= ts
;
5668 spin_unlock(&adapter
->tmreg_lock
);
5672 if (tsicr
& TSINTR_AUTT0
) {
5673 nsec
= rd32(E1000_AUXSTMPL0
);
5674 sec
= rd32(E1000_AUXSTMPH0
);
5675 event
.type
= PTP_CLOCK_EXTTS
;
5677 event
.timestamp
= sec
* 1000000000ULL + nsec
;
5678 ptp_clock_event(adapter
->ptp_clock
, &event
);
5679 ack
|= TSINTR_AUTT0
;
5682 if (tsicr
& TSINTR_AUTT1
) {
5683 nsec
= rd32(E1000_AUXSTMPL1
);
5684 sec
= rd32(E1000_AUXSTMPH1
);
5685 event
.type
= PTP_CLOCK_EXTTS
;
5687 event
.timestamp
= sec
* 1000000000ULL + nsec
;
5688 ptp_clock_event(adapter
->ptp_clock
, &event
);
5689 ack
|= TSINTR_AUTT1
;
5692 /* acknowledge the interrupts */
5693 wr32(E1000_TSICR
, ack
);
5696 static irqreturn_t
igb_msix_other(int irq
, void *data
)
5698 struct igb_adapter
*adapter
= data
;
5699 struct e1000_hw
*hw
= &adapter
->hw
;
5700 u32 icr
= rd32(E1000_ICR
);
5701 /* reading ICR causes bit 31 of EICR to be cleared */
5703 if (icr
& E1000_ICR_DRSTA
)
5704 schedule_work(&adapter
->reset_task
);
5706 if (icr
& E1000_ICR_DOUTSYNC
) {
5707 /* HW is reporting DMA is out of sync */
5708 adapter
->stats
.doosync
++;
5709 /* The DMA Out of Sync is also indication of a spoof event
5710 * in IOV mode. Check the Wrong VM Behavior register to
5711 * see if it is really a spoof event.
5713 igb_check_wvbr(adapter
);
5716 /* Check for a mailbox event */
5717 if (icr
& E1000_ICR_VMMB
)
5718 igb_msg_task(adapter
);
5720 if (icr
& E1000_ICR_LSC
) {
5721 hw
->mac
.get_link_status
= 1;
5722 /* guard against interrupt when we're going down */
5723 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
5724 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
5727 if (icr
& E1000_ICR_TS
)
5728 igb_tsync_interrupt(adapter
);
5730 wr32(E1000_EIMS
, adapter
->eims_other
);
5735 static void igb_write_itr(struct igb_q_vector
*q_vector
)
5737 struct igb_adapter
*adapter
= q_vector
->adapter
;
5738 u32 itr_val
= q_vector
->itr_val
& 0x7FFC;
5740 if (!q_vector
->set_itr
)
5746 if (adapter
->hw
.mac
.type
== e1000_82575
)
5747 itr_val
|= itr_val
<< 16;
5749 itr_val
|= E1000_EITR_CNT_IGNR
;
5751 writel(itr_val
, q_vector
->itr_register
);
5752 q_vector
->set_itr
= 0;
5755 static irqreturn_t
igb_msix_ring(int irq
, void *data
)
5757 struct igb_q_vector
*q_vector
= data
;
5759 /* Write the ITR value calculated from the previous interrupt. */
5760 igb_write_itr(q_vector
);
5762 napi_schedule(&q_vector
->napi
);
5767 #ifdef CONFIG_IGB_DCA
5768 static void igb_update_tx_dca(struct igb_adapter
*adapter
,
5769 struct igb_ring
*tx_ring
,
5772 struct e1000_hw
*hw
= &adapter
->hw
;
5773 u32 txctrl
= dca3_get_tag(tx_ring
->dev
, cpu
);
5775 if (hw
->mac
.type
!= e1000_82575
)
5776 txctrl
<<= E1000_DCA_TXCTRL_CPUID_SHIFT
;
5778 /* We can enable relaxed ordering for reads, but not writes when
5779 * DCA is enabled. This is due to a known issue in some chipsets
5780 * which will cause the DCA tag to be cleared.
5782 txctrl
|= E1000_DCA_TXCTRL_DESC_RRO_EN
|
5783 E1000_DCA_TXCTRL_DATA_RRO_EN
|
5784 E1000_DCA_TXCTRL_DESC_DCA_EN
;
5786 wr32(E1000_DCA_TXCTRL(tx_ring
->reg_idx
), txctrl
);
5789 static void igb_update_rx_dca(struct igb_adapter
*adapter
,
5790 struct igb_ring
*rx_ring
,
5793 struct e1000_hw
*hw
= &adapter
->hw
;
5794 u32 rxctrl
= dca3_get_tag(&adapter
->pdev
->dev
, cpu
);
5796 if (hw
->mac
.type
!= e1000_82575
)
5797 rxctrl
<<= E1000_DCA_RXCTRL_CPUID_SHIFT
;
5799 /* We can enable relaxed ordering for reads, but not writes when
5800 * DCA is enabled. This is due to a known issue in some chipsets
5801 * which will cause the DCA tag to be cleared.
5803 rxctrl
|= E1000_DCA_RXCTRL_DESC_RRO_EN
|
5804 E1000_DCA_RXCTRL_DESC_DCA_EN
;
5806 wr32(E1000_DCA_RXCTRL(rx_ring
->reg_idx
), rxctrl
);
5809 static void igb_update_dca(struct igb_q_vector
*q_vector
)
5811 struct igb_adapter
*adapter
= q_vector
->adapter
;
5812 int cpu
= get_cpu();
5814 if (q_vector
->cpu
== cpu
)
5817 if (q_vector
->tx
.ring
)
5818 igb_update_tx_dca(adapter
, q_vector
->tx
.ring
, cpu
);
5820 if (q_vector
->rx
.ring
)
5821 igb_update_rx_dca(adapter
, q_vector
->rx
.ring
, cpu
);
5823 q_vector
->cpu
= cpu
;
5828 static void igb_setup_dca(struct igb_adapter
*adapter
)
5830 struct e1000_hw
*hw
= &adapter
->hw
;
5833 if (!(adapter
->flags
& IGB_FLAG_DCA_ENABLED
))
5836 /* Always use CB2 mode, difference is masked in the CB driver. */
5837 wr32(E1000_DCA_CTRL
, E1000_DCA_CTRL_DCA_MODE_CB2
);
5839 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
5840 adapter
->q_vector
[i
]->cpu
= -1;
5841 igb_update_dca(adapter
->q_vector
[i
]);
5845 static int __igb_notify_dca(struct device
*dev
, void *data
)
5847 struct net_device
*netdev
= dev_get_drvdata(dev
);
5848 struct igb_adapter
*adapter
= netdev_priv(netdev
);
5849 struct pci_dev
*pdev
= adapter
->pdev
;
5850 struct e1000_hw
*hw
= &adapter
->hw
;
5851 unsigned long event
= *(unsigned long *)data
;
5854 case DCA_PROVIDER_ADD
:
5855 /* if already enabled, don't do it again */
5856 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
)
5858 if (dca_add_requester(dev
) == 0) {
5859 adapter
->flags
|= IGB_FLAG_DCA_ENABLED
;
5860 dev_info(&pdev
->dev
, "DCA enabled\n");
5861 igb_setup_dca(adapter
);
5864 /* Fall Through since DCA is disabled. */
5865 case DCA_PROVIDER_REMOVE
:
5866 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
) {
5867 /* without this a class_device is left
5868 * hanging around in the sysfs model
5870 dca_remove_requester(dev
);
5871 dev_info(&pdev
->dev
, "DCA disabled\n");
5872 adapter
->flags
&= ~IGB_FLAG_DCA_ENABLED
;
5873 wr32(E1000_DCA_CTRL
, E1000_DCA_CTRL_DCA_MODE_DISABLE
);
5881 static int igb_notify_dca(struct notifier_block
*nb
, unsigned long event
,
5886 ret_val
= driver_for_each_device(&igb_driver
.driver
, NULL
, &event
,
5889 return ret_val
? NOTIFY_BAD
: NOTIFY_DONE
;
5891 #endif /* CONFIG_IGB_DCA */
5893 #ifdef CONFIG_PCI_IOV
5894 static int igb_vf_configure(struct igb_adapter
*adapter
, int vf
)
5896 unsigned char mac_addr
[ETH_ALEN
];
5898 eth_zero_addr(mac_addr
);
5899 igb_set_vf_mac(adapter
, vf
, mac_addr
);
5901 /* By default spoof check is enabled for all VFs */
5902 adapter
->vf_data
[vf
].spoofchk_enabled
= true;
5908 static void igb_ping_all_vfs(struct igb_adapter
*adapter
)
5910 struct e1000_hw
*hw
= &adapter
->hw
;
5914 for (i
= 0 ; i
< adapter
->vfs_allocated_count
; i
++) {
5915 ping
= E1000_PF_CONTROL_MSG
;
5916 if (adapter
->vf_data
[i
].flags
& IGB_VF_FLAG_CTS
)
5917 ping
|= E1000_VT_MSGTYPE_CTS
;
5918 igb_write_mbx(hw
, &ping
, 1, i
);
5922 static int igb_set_vf_promisc(struct igb_adapter
*adapter
, u32
*msgbuf
, u32 vf
)
5924 struct e1000_hw
*hw
= &adapter
->hw
;
5925 u32 vmolr
= rd32(E1000_VMOLR(vf
));
5926 struct vf_data_storage
*vf_data
= &adapter
->vf_data
[vf
];
5928 vf_data
->flags
&= ~(IGB_VF_FLAG_UNI_PROMISC
|
5929 IGB_VF_FLAG_MULTI_PROMISC
);
5930 vmolr
&= ~(E1000_VMOLR_ROPE
| E1000_VMOLR_ROMPE
| E1000_VMOLR_MPME
);
5932 if (*msgbuf
& E1000_VF_SET_PROMISC_MULTICAST
) {
5933 vmolr
|= E1000_VMOLR_MPME
;
5934 vf_data
->flags
|= IGB_VF_FLAG_MULTI_PROMISC
;
5935 *msgbuf
&= ~E1000_VF_SET_PROMISC_MULTICAST
;
5937 /* if we have hashes and we are clearing a multicast promisc
5938 * flag we need to write the hashes to the MTA as this step
5939 * was previously skipped
5941 if (vf_data
->num_vf_mc_hashes
> 30) {
5942 vmolr
|= E1000_VMOLR_MPME
;
5943 } else if (vf_data
->num_vf_mc_hashes
) {
5946 vmolr
|= E1000_VMOLR_ROMPE
;
5947 for (j
= 0; j
< vf_data
->num_vf_mc_hashes
; j
++)
5948 igb_mta_set(hw
, vf_data
->vf_mc_hashes
[j
]);
5952 wr32(E1000_VMOLR(vf
), vmolr
);
5954 /* there are flags left unprocessed, likely not supported */
5955 if (*msgbuf
& E1000_VT_MSGINFO_MASK
)
5961 static int igb_set_vf_multicasts(struct igb_adapter
*adapter
,
5962 u32
*msgbuf
, u32 vf
)
5964 int n
= (msgbuf
[0] & E1000_VT_MSGINFO_MASK
) >> E1000_VT_MSGINFO_SHIFT
;
5965 u16
*hash_list
= (u16
*)&msgbuf
[1];
5966 struct vf_data_storage
*vf_data
= &adapter
->vf_data
[vf
];
5969 /* salt away the number of multicast addresses assigned
5970 * to this VF for later use to restore when the PF multi cast
5973 vf_data
->num_vf_mc_hashes
= n
;
5975 /* only up to 30 hash values supported */
5979 /* store the hashes for later use */
5980 for (i
= 0; i
< n
; i
++)
5981 vf_data
->vf_mc_hashes
[i
] = hash_list
[i
];
5983 /* Flush and reset the mta with the new values */
5984 igb_set_rx_mode(adapter
->netdev
);
5989 static void igb_restore_vf_multicasts(struct igb_adapter
*adapter
)
5991 struct e1000_hw
*hw
= &adapter
->hw
;
5992 struct vf_data_storage
*vf_data
;
5995 for (i
= 0; i
< adapter
->vfs_allocated_count
; i
++) {
5996 u32 vmolr
= rd32(E1000_VMOLR(i
));
5998 vmolr
&= ~(E1000_VMOLR_ROMPE
| E1000_VMOLR_MPME
);
6000 vf_data
= &adapter
->vf_data
[i
];
6002 if ((vf_data
->num_vf_mc_hashes
> 30) ||
6003 (vf_data
->flags
& IGB_VF_FLAG_MULTI_PROMISC
)) {
6004 vmolr
|= E1000_VMOLR_MPME
;
6005 } else if (vf_data
->num_vf_mc_hashes
) {
6006 vmolr
|= E1000_VMOLR_ROMPE
;
6007 for (j
= 0; j
< vf_data
->num_vf_mc_hashes
; j
++)
6008 igb_mta_set(hw
, vf_data
->vf_mc_hashes
[j
]);
6010 wr32(E1000_VMOLR(i
), vmolr
);
6014 static void igb_clear_vf_vfta(struct igb_adapter
*adapter
, u32 vf
)
6016 struct e1000_hw
*hw
= &adapter
->hw
;
6017 u32 pool_mask
, vlvf_mask
, i
;
6019 /* create mask for VF and other pools */
6020 pool_mask
= E1000_VLVF_POOLSEL_MASK
;
6021 vlvf_mask
= BIT(E1000_VLVF_POOLSEL_SHIFT
+ vf
);
6023 /* drop PF from pool bits */
6024 pool_mask
&= ~BIT(E1000_VLVF_POOLSEL_SHIFT
+
6025 adapter
->vfs_allocated_count
);
6027 /* Find the vlan filter for this id */
6028 for (i
= E1000_VLVF_ARRAY_SIZE
; i
--;) {
6029 u32 vlvf
= rd32(E1000_VLVF(i
));
6030 u32 vfta_mask
, vid
, vfta
;
6032 /* remove the vf from the pool */
6033 if (!(vlvf
& vlvf_mask
))
6036 /* clear out bit from VLVF */
6039 /* if other pools are present, just remove ourselves */
6040 if (vlvf
& pool_mask
)
6043 /* if PF is present, leave VFTA */
6044 if (vlvf
& E1000_VLVF_POOLSEL_MASK
)
6047 vid
= vlvf
& E1000_VLVF_VLANID_MASK
;
6048 vfta_mask
= BIT(vid
% 32);
6050 /* clear bit from VFTA */
6051 vfta
= adapter
->shadow_vfta
[vid
/ 32];
6052 if (vfta
& vfta_mask
)
6053 hw
->mac
.ops
.write_vfta(hw
, vid
/ 32, vfta
^ vfta_mask
);
6055 /* clear pool selection enable */
6056 if (adapter
->flags
& IGB_FLAG_VLAN_PROMISC
)
6057 vlvf
&= E1000_VLVF_POOLSEL_MASK
;
6061 /* clear pool bits */
6062 wr32(E1000_VLVF(i
), vlvf
);
6066 static int igb_find_vlvf_entry(struct e1000_hw
*hw
, u32 vlan
)
6071 /* short cut the special case */
6075 /* Search for the VLAN id in the VLVF entries */
6076 for (idx
= E1000_VLVF_ARRAY_SIZE
; --idx
;) {
6077 vlvf
= rd32(E1000_VLVF(idx
));
6078 if ((vlvf
& VLAN_VID_MASK
) == vlan
)
6085 static void igb_update_pf_vlvf(struct igb_adapter
*adapter
, u32 vid
)
6087 struct e1000_hw
*hw
= &adapter
->hw
;
6091 idx
= igb_find_vlvf_entry(hw
, vid
);
6095 /* See if any other pools are set for this VLAN filter
6096 * entry other than the PF.
6098 pf_id
= adapter
->vfs_allocated_count
+ E1000_VLVF_POOLSEL_SHIFT
;
6099 bits
= ~BIT(pf_id
) & E1000_VLVF_POOLSEL_MASK
;
6100 bits
&= rd32(E1000_VLVF(idx
));
6102 /* Disable the filter so this falls into the default pool. */
6104 if (adapter
->flags
& IGB_FLAG_VLAN_PROMISC
)
6105 wr32(E1000_VLVF(idx
), BIT(pf_id
));
6107 wr32(E1000_VLVF(idx
), 0);
6111 static s32
igb_set_vf_vlan(struct igb_adapter
*adapter
, u32 vid
,
6114 int pf_id
= adapter
->vfs_allocated_count
;
6115 struct e1000_hw
*hw
= &adapter
->hw
;
6118 /* If VLAN overlaps with one the PF is currently monitoring make
6119 * sure that we are able to allocate a VLVF entry. This may be
6120 * redundant but it guarantees PF will maintain visibility to
6123 if (add
&& test_bit(vid
, adapter
->active_vlans
)) {
6124 err
= igb_vfta_set(hw
, vid
, pf_id
, true, false);
6129 err
= igb_vfta_set(hw
, vid
, vf
, add
, false);
6134 /* If we failed to add the VF VLAN or we are removing the VF VLAN
6135 * we may need to drop the PF pool bit in order to allow us to free
6136 * up the VLVF resources.
6138 if (test_bit(vid
, adapter
->active_vlans
) ||
6139 (adapter
->flags
& IGB_FLAG_VLAN_PROMISC
))
6140 igb_update_pf_vlvf(adapter
, vid
);
6145 static void igb_set_vmvir(struct igb_adapter
*adapter
, u32 vid
, u32 vf
)
6147 struct e1000_hw
*hw
= &adapter
->hw
;
6150 wr32(E1000_VMVIR(vf
), (vid
| E1000_VMVIR_VLANA_DEFAULT
));
6152 wr32(E1000_VMVIR(vf
), 0);
6155 static int igb_enable_port_vlan(struct igb_adapter
*adapter
, int vf
,
6160 err
= igb_set_vf_vlan(adapter
, vlan
, true, vf
);
6164 igb_set_vmvir(adapter
, vlan
| (qos
<< VLAN_PRIO_SHIFT
), vf
);
6165 igb_set_vmolr(adapter
, vf
, !vlan
);
6167 /* revoke access to previous VLAN */
6168 if (vlan
!= adapter
->vf_data
[vf
].pf_vlan
)
6169 igb_set_vf_vlan(adapter
, adapter
->vf_data
[vf
].pf_vlan
,
6172 adapter
->vf_data
[vf
].pf_vlan
= vlan
;
6173 adapter
->vf_data
[vf
].pf_qos
= qos
;
6174 igb_set_vf_vlan_strip(adapter
, vf
, true);
6175 dev_info(&adapter
->pdev
->dev
,
6176 "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan
, qos
, vf
);
6177 if (test_bit(__IGB_DOWN
, &adapter
->state
)) {
6178 dev_warn(&adapter
->pdev
->dev
,
6179 "The VF VLAN has been set, but the PF device is not up.\n");
6180 dev_warn(&adapter
->pdev
->dev
,
6181 "Bring the PF device up before attempting to use the VF device.\n");
6187 static int igb_disable_port_vlan(struct igb_adapter
*adapter
, int vf
)
6189 /* Restore tagless access via VLAN 0 */
6190 igb_set_vf_vlan(adapter
, 0, true, vf
);
6192 igb_set_vmvir(adapter
, 0, vf
);
6193 igb_set_vmolr(adapter
, vf
, true);
6195 /* Remove any PF assigned VLAN */
6196 if (adapter
->vf_data
[vf
].pf_vlan
)
6197 igb_set_vf_vlan(adapter
, adapter
->vf_data
[vf
].pf_vlan
,
6200 adapter
->vf_data
[vf
].pf_vlan
= 0;
6201 adapter
->vf_data
[vf
].pf_qos
= 0;
6202 igb_set_vf_vlan_strip(adapter
, vf
, false);
6207 static int igb_ndo_set_vf_vlan(struct net_device
*netdev
,
6208 int vf
, u16 vlan
, u8 qos
)
6210 struct igb_adapter
*adapter
= netdev_priv(netdev
);
6212 if ((vf
>= adapter
->vfs_allocated_count
) || (vlan
> 4095) || (qos
> 7))
6215 return (vlan
|| qos
) ? igb_enable_port_vlan(adapter
, vf
, vlan
, qos
) :
6216 igb_disable_port_vlan(adapter
, vf
);
6219 static int igb_set_vf_vlan_msg(struct igb_adapter
*adapter
, u32
*msgbuf
, u32 vf
)
6221 int add
= (msgbuf
[0] & E1000_VT_MSGINFO_MASK
) >> E1000_VT_MSGINFO_SHIFT
;
6222 int vid
= (msgbuf
[1] & E1000_VLVF_VLANID_MASK
);
6225 if (adapter
->vf_data
[vf
].pf_vlan
)
6228 /* VLAN 0 is a special case, don't allow it to be removed */
6232 ret
= igb_set_vf_vlan(adapter
, vid
, !!add
, vf
);
6234 igb_set_vf_vlan_strip(adapter
, vf
, !!vid
);
6238 static inline void igb_vf_reset(struct igb_adapter
*adapter
, u32 vf
)
6240 struct vf_data_storage
*vf_data
= &adapter
->vf_data
[vf
];
6242 /* clear flags - except flag that indicates PF has set the MAC */
6243 vf_data
->flags
&= IGB_VF_FLAG_PF_SET_MAC
;
6244 vf_data
->last_nack
= jiffies
;
6246 /* reset vlans for device */
6247 igb_clear_vf_vfta(adapter
, vf
);
6248 igb_set_vf_vlan(adapter
, vf_data
->pf_vlan
, true, vf
);
6249 igb_set_vmvir(adapter
, vf_data
->pf_vlan
|
6250 (vf_data
->pf_qos
<< VLAN_PRIO_SHIFT
), vf
);
6251 igb_set_vmolr(adapter
, vf
, !vf_data
->pf_vlan
);
6252 igb_set_vf_vlan_strip(adapter
, vf
, !!(vf_data
->pf_vlan
));
6254 /* reset multicast table array for vf */
6255 adapter
->vf_data
[vf
].num_vf_mc_hashes
= 0;
6257 /* Flush and reset the mta with the new values */
6258 igb_set_rx_mode(adapter
->netdev
);
6261 static void igb_vf_reset_event(struct igb_adapter
*adapter
, u32 vf
)
6263 unsigned char *vf_mac
= adapter
->vf_data
[vf
].vf_mac_addresses
;
6265 /* clear mac address as we were hotplug removed/added */
6266 if (!(adapter
->vf_data
[vf
].flags
& IGB_VF_FLAG_PF_SET_MAC
))
6267 eth_zero_addr(vf_mac
);
6269 /* process remaining reset events */
6270 igb_vf_reset(adapter
, vf
);
6273 static void igb_vf_reset_msg(struct igb_adapter
*adapter
, u32 vf
)
6275 struct e1000_hw
*hw
= &adapter
->hw
;
6276 unsigned char *vf_mac
= adapter
->vf_data
[vf
].vf_mac_addresses
;
6277 int rar_entry
= hw
->mac
.rar_entry_count
- (vf
+ 1);
6279 u8
*addr
= (u8
*)(&msgbuf
[1]);
6281 /* process all the same items cleared in a function level reset */
6282 igb_vf_reset(adapter
, vf
);
6284 /* set vf mac address */
6285 igb_rar_set_qsel(adapter
, vf_mac
, rar_entry
, vf
);
6287 /* enable transmit and receive for vf */
6288 reg
= rd32(E1000_VFTE
);
6289 wr32(E1000_VFTE
, reg
| BIT(vf
));
6290 reg
= rd32(E1000_VFRE
);
6291 wr32(E1000_VFRE
, reg
| BIT(vf
));
6293 adapter
->vf_data
[vf
].flags
|= IGB_VF_FLAG_CTS
;
6295 /* reply to reset with ack and vf mac address */
6296 if (!is_zero_ether_addr(vf_mac
)) {
6297 msgbuf
[0] = E1000_VF_RESET
| E1000_VT_MSGTYPE_ACK
;
6298 memcpy(addr
, vf_mac
, ETH_ALEN
);
6300 msgbuf
[0] = E1000_VF_RESET
| E1000_VT_MSGTYPE_NACK
;
6302 igb_write_mbx(hw
, msgbuf
, 3, vf
);
6305 static int igb_set_vf_mac_addr(struct igb_adapter
*adapter
, u32
*msg
, int vf
)
6307 /* The VF MAC Address is stored in a packed array of bytes
6308 * starting at the second 32 bit word of the msg array
6310 unsigned char *addr
= (char *)&msg
[1];
6313 if (is_valid_ether_addr(addr
))
6314 err
= igb_set_vf_mac(adapter
, vf
, addr
);
6319 static void igb_rcv_ack_from_vf(struct igb_adapter
*adapter
, u32 vf
)
6321 struct e1000_hw
*hw
= &adapter
->hw
;
6322 struct vf_data_storage
*vf_data
= &adapter
->vf_data
[vf
];
6323 u32 msg
= E1000_VT_MSGTYPE_NACK
;
6325 /* if device isn't clear to send it shouldn't be reading either */
6326 if (!(vf_data
->flags
& IGB_VF_FLAG_CTS
) &&
6327 time_after(jiffies
, vf_data
->last_nack
+ (2 * HZ
))) {
6328 igb_write_mbx(hw
, &msg
, 1, vf
);
6329 vf_data
->last_nack
= jiffies
;
6333 static void igb_rcv_msg_from_vf(struct igb_adapter
*adapter
, u32 vf
)
6335 struct pci_dev
*pdev
= adapter
->pdev
;
6336 u32 msgbuf
[E1000_VFMAILBOX_SIZE
];
6337 struct e1000_hw
*hw
= &adapter
->hw
;
6338 struct vf_data_storage
*vf_data
= &adapter
->vf_data
[vf
];
6341 retval
= igb_read_mbx(hw
, msgbuf
, E1000_VFMAILBOX_SIZE
, vf
);
6344 /* if receive failed revoke VF CTS stats and restart init */
6345 dev_err(&pdev
->dev
, "Error receiving message from VF\n");
6346 vf_data
->flags
&= ~IGB_VF_FLAG_CTS
;
6347 if (!time_after(jiffies
, vf_data
->last_nack
+ (2 * HZ
)))
6352 /* this is a message we already processed, do nothing */
6353 if (msgbuf
[0] & (E1000_VT_MSGTYPE_ACK
| E1000_VT_MSGTYPE_NACK
))
6356 /* until the vf completes a reset it should not be
6357 * allowed to start any configuration.
6359 if (msgbuf
[0] == E1000_VF_RESET
) {
6360 igb_vf_reset_msg(adapter
, vf
);
6364 if (!(vf_data
->flags
& IGB_VF_FLAG_CTS
)) {
6365 if (!time_after(jiffies
, vf_data
->last_nack
+ (2 * HZ
)))
6371 switch ((msgbuf
[0] & 0xFFFF)) {
6372 case E1000_VF_SET_MAC_ADDR
:
6374 if (!(vf_data
->flags
& IGB_VF_FLAG_PF_SET_MAC
))
6375 retval
= igb_set_vf_mac_addr(adapter
, msgbuf
, vf
);
6377 dev_warn(&pdev
->dev
,
6378 "VF %d attempted to override administratively set MAC address\nReload the VF driver to resume operations\n",
6381 case E1000_VF_SET_PROMISC
:
6382 retval
= igb_set_vf_promisc(adapter
, msgbuf
, vf
);
6384 case E1000_VF_SET_MULTICAST
:
6385 retval
= igb_set_vf_multicasts(adapter
, msgbuf
, vf
);
6387 case E1000_VF_SET_LPE
:
6388 retval
= igb_set_vf_rlpml(adapter
, msgbuf
[1], vf
);
6390 case E1000_VF_SET_VLAN
:
6392 if (vf_data
->pf_vlan
)
6393 dev_warn(&pdev
->dev
,
6394 "VF %d attempted to override administratively set VLAN tag\nReload the VF driver to resume operations\n",
6397 retval
= igb_set_vf_vlan_msg(adapter
, msgbuf
, vf
);
6400 dev_err(&pdev
->dev
, "Unhandled Msg %08x\n", msgbuf
[0]);
6405 msgbuf
[0] |= E1000_VT_MSGTYPE_CTS
;
6407 /* notify the VF of the results of what it sent us */
6409 msgbuf
[0] |= E1000_VT_MSGTYPE_NACK
;
6411 msgbuf
[0] |= E1000_VT_MSGTYPE_ACK
;
6413 igb_write_mbx(hw
, msgbuf
, 1, vf
);
6416 static void igb_msg_task(struct igb_adapter
*adapter
)
6418 struct e1000_hw
*hw
= &adapter
->hw
;
6421 for (vf
= 0; vf
< adapter
->vfs_allocated_count
; vf
++) {
6422 /* process any reset requests */
6423 if (!igb_check_for_rst(hw
, vf
))
6424 igb_vf_reset_event(adapter
, vf
);
6426 /* process any messages pending */
6427 if (!igb_check_for_msg(hw
, vf
))
6428 igb_rcv_msg_from_vf(adapter
, vf
);
6430 /* process any acks */
6431 if (!igb_check_for_ack(hw
, vf
))
6432 igb_rcv_ack_from_vf(adapter
, vf
);
6437 * igb_set_uta - Set unicast filter table address
6438 * @adapter: board private structure
6439 * @set: boolean indicating if we are setting or clearing bits
6441 * The unicast table address is a register array of 32-bit registers.
6442 * The table is meant to be used in a way similar to how the MTA is used
6443 * however due to certain limitations in the hardware it is necessary to
6444 * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous
6445 * enable bit to allow vlan tag stripping when promiscuous mode is enabled
6447 static void igb_set_uta(struct igb_adapter
*adapter
, bool set
)
6449 struct e1000_hw
*hw
= &adapter
->hw
;
6450 u32 uta
= set
? ~0 : 0;
6453 /* we only need to do this if VMDq is enabled */
6454 if (!adapter
->vfs_allocated_count
)
6457 for (i
= hw
->mac
.uta_reg_count
; i
--;)
6458 array_wr32(E1000_UTA
, i
, uta
);
6462 * igb_intr_msi - Interrupt Handler
6463 * @irq: interrupt number
6464 * @data: pointer to a network interface device structure
6466 static irqreturn_t
igb_intr_msi(int irq
, void *data
)
6468 struct igb_adapter
*adapter
= data
;
6469 struct igb_q_vector
*q_vector
= adapter
->q_vector
[0];
6470 struct e1000_hw
*hw
= &adapter
->hw
;
6471 /* read ICR disables interrupts using IAM */
6472 u32 icr
= rd32(E1000_ICR
);
6474 igb_write_itr(q_vector
);
6476 if (icr
& E1000_ICR_DRSTA
)
6477 schedule_work(&adapter
->reset_task
);
6479 if (icr
& E1000_ICR_DOUTSYNC
) {
6480 /* HW is reporting DMA is out of sync */
6481 adapter
->stats
.doosync
++;
6484 if (icr
& (E1000_ICR_RXSEQ
| E1000_ICR_LSC
)) {
6485 hw
->mac
.get_link_status
= 1;
6486 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
6487 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
6490 if (icr
& E1000_ICR_TS
)
6491 igb_tsync_interrupt(adapter
);
6493 napi_schedule(&q_vector
->napi
);
6499 * igb_intr - Legacy Interrupt Handler
6500 * @irq: interrupt number
6501 * @data: pointer to a network interface device structure
6503 static irqreturn_t
igb_intr(int irq
, void *data
)
6505 struct igb_adapter
*adapter
= data
;
6506 struct igb_q_vector
*q_vector
= adapter
->q_vector
[0];
6507 struct e1000_hw
*hw
= &adapter
->hw
;
6508 /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
6509 * need for the IMC write
6511 u32 icr
= rd32(E1000_ICR
);
6513 /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
6514 * not set, then the adapter didn't send an interrupt
6516 if (!(icr
& E1000_ICR_INT_ASSERTED
))
6519 igb_write_itr(q_vector
);
6521 if (icr
& E1000_ICR_DRSTA
)
6522 schedule_work(&adapter
->reset_task
);
6524 if (icr
& E1000_ICR_DOUTSYNC
) {
6525 /* HW is reporting DMA is out of sync */
6526 adapter
->stats
.doosync
++;
6529 if (icr
& (E1000_ICR_RXSEQ
| E1000_ICR_LSC
)) {
6530 hw
->mac
.get_link_status
= 1;
6531 /* guard against interrupt when we're going down */
6532 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
6533 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
6536 if (icr
& E1000_ICR_TS
)
6537 igb_tsync_interrupt(adapter
);
6539 napi_schedule(&q_vector
->napi
);
6544 static void igb_ring_irq_enable(struct igb_q_vector
*q_vector
)
6546 struct igb_adapter
*adapter
= q_vector
->adapter
;
6547 struct e1000_hw
*hw
= &adapter
->hw
;
6549 if ((q_vector
->rx
.ring
&& (adapter
->rx_itr_setting
& 3)) ||
6550 (!q_vector
->rx
.ring
&& (adapter
->tx_itr_setting
& 3))) {
6551 if ((adapter
->num_q_vectors
== 1) && !adapter
->vf_data
)
6552 igb_set_itr(q_vector
);
6554 igb_update_ring_itr(q_vector
);
6557 if (!test_bit(__IGB_DOWN
, &adapter
->state
)) {
6558 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
)
6559 wr32(E1000_EIMS
, q_vector
->eims_value
);
6561 igb_irq_enable(adapter
);
6566 * igb_poll - NAPI Rx polling callback
6567 * @napi: napi polling structure
6568 * @budget: count of how many packets we should handle
6570 static int igb_poll(struct napi_struct
*napi
, int budget
)
6572 struct igb_q_vector
*q_vector
= container_of(napi
,
6573 struct igb_q_vector
,
6575 bool clean_complete
= true;
6578 #ifdef CONFIG_IGB_DCA
6579 if (q_vector
->adapter
->flags
& IGB_FLAG_DCA_ENABLED
)
6580 igb_update_dca(q_vector
);
6582 if (q_vector
->tx
.ring
)
6583 clean_complete
= igb_clean_tx_irq(q_vector
, budget
);
6585 if (q_vector
->rx
.ring
) {
6586 int cleaned
= igb_clean_rx_irq(q_vector
, budget
);
6588 work_done
+= cleaned
;
6589 if (cleaned
>= budget
)
6590 clean_complete
= false;
6593 /* If all work not completed, return budget and keep polling */
6594 if (!clean_complete
)
6597 /* If not enough Rx work done, exit the polling mode */
6598 napi_complete_done(napi
, work_done
);
6599 igb_ring_irq_enable(q_vector
);
6605 * igb_clean_tx_irq - Reclaim resources after transmit completes
6606 * @q_vector: pointer to q_vector containing needed info
6607 * @napi_budget: Used to determine if we are in netpoll
6609 * returns true if ring is completely cleaned
6611 static bool igb_clean_tx_irq(struct igb_q_vector
*q_vector
, int napi_budget
)
6613 struct igb_adapter
*adapter
= q_vector
->adapter
;
6614 struct igb_ring
*tx_ring
= q_vector
->tx
.ring
;
6615 struct igb_tx_buffer
*tx_buffer
;
6616 union e1000_adv_tx_desc
*tx_desc
;
6617 unsigned int total_bytes
= 0, total_packets
= 0;
6618 unsigned int budget
= q_vector
->tx
.work_limit
;
6619 unsigned int i
= tx_ring
->next_to_clean
;
6621 if (test_bit(__IGB_DOWN
, &adapter
->state
))
6624 tx_buffer
= &tx_ring
->tx_buffer_info
[i
];
6625 tx_desc
= IGB_TX_DESC(tx_ring
, i
);
6626 i
-= tx_ring
->count
;
6629 union e1000_adv_tx_desc
*eop_desc
= tx_buffer
->next_to_watch
;
6631 /* if next_to_watch is not set then there is no work pending */
6635 /* prevent any other reads prior to eop_desc */
6636 read_barrier_depends();
6638 /* if DD is not set pending work has not been completed */
6639 if (!(eop_desc
->wb
.status
& cpu_to_le32(E1000_TXD_STAT_DD
)))
6642 /* clear next_to_watch to prevent false hangs */
6643 tx_buffer
->next_to_watch
= NULL
;
6645 /* update the statistics for this packet */
6646 total_bytes
+= tx_buffer
->bytecount
;
6647 total_packets
+= tx_buffer
->gso_segs
;
6650 napi_consume_skb(tx_buffer
->skb
, napi_budget
);
6652 /* unmap skb header data */
6653 dma_unmap_single(tx_ring
->dev
,
6654 dma_unmap_addr(tx_buffer
, dma
),
6655 dma_unmap_len(tx_buffer
, len
),
6658 /* clear tx_buffer data */
6659 tx_buffer
->skb
= NULL
;
6660 dma_unmap_len_set(tx_buffer
, len
, 0);
6662 /* clear last DMA location and unmap remaining buffers */
6663 while (tx_desc
!= eop_desc
) {
6668 i
-= tx_ring
->count
;
6669 tx_buffer
= tx_ring
->tx_buffer_info
;
6670 tx_desc
= IGB_TX_DESC(tx_ring
, 0);
6673 /* unmap any remaining paged data */
6674 if (dma_unmap_len(tx_buffer
, len
)) {
6675 dma_unmap_page(tx_ring
->dev
,
6676 dma_unmap_addr(tx_buffer
, dma
),
6677 dma_unmap_len(tx_buffer
, len
),
6679 dma_unmap_len_set(tx_buffer
, len
, 0);
6683 /* move us one more past the eop_desc for start of next pkt */
6688 i
-= tx_ring
->count
;
6689 tx_buffer
= tx_ring
->tx_buffer_info
;
6690 tx_desc
= IGB_TX_DESC(tx_ring
, 0);
6693 /* issue prefetch for next Tx descriptor */
6696 /* update budget accounting */
6698 } while (likely(budget
));
6700 netdev_tx_completed_queue(txring_txq(tx_ring
),
6701 total_packets
, total_bytes
);
6702 i
+= tx_ring
->count
;
6703 tx_ring
->next_to_clean
= i
;
6704 u64_stats_update_begin(&tx_ring
->tx_syncp
);
6705 tx_ring
->tx_stats
.bytes
+= total_bytes
;
6706 tx_ring
->tx_stats
.packets
+= total_packets
;
6707 u64_stats_update_end(&tx_ring
->tx_syncp
);
6708 q_vector
->tx
.total_bytes
+= total_bytes
;
6709 q_vector
->tx
.total_packets
+= total_packets
;
6711 if (test_bit(IGB_RING_FLAG_TX_DETECT_HANG
, &tx_ring
->flags
)) {
6712 struct e1000_hw
*hw
= &adapter
->hw
;
6714 /* Detect a transmit hang in hardware, this serializes the
6715 * check with the clearing of time_stamp and movement of i
6717 clear_bit(IGB_RING_FLAG_TX_DETECT_HANG
, &tx_ring
->flags
);
6718 if (tx_buffer
->next_to_watch
&&
6719 time_after(jiffies
, tx_buffer
->time_stamp
+
6720 (adapter
->tx_timeout_factor
* HZ
)) &&
6721 !(rd32(E1000_STATUS
) & E1000_STATUS_TXOFF
)) {
6723 /* detected Tx unit hang */
6724 dev_err(tx_ring
->dev
,
6725 "Detected Tx Unit Hang\n"
6729 " next_to_use <%x>\n"
6730 " next_to_clean <%x>\n"
6731 "buffer_info[next_to_clean]\n"
6732 " time_stamp <%lx>\n"
6733 " next_to_watch <%p>\n"
6735 " desc.status <%x>\n",
6736 tx_ring
->queue_index
,
6737 rd32(E1000_TDH(tx_ring
->reg_idx
)),
6738 readl(tx_ring
->tail
),
6739 tx_ring
->next_to_use
,
6740 tx_ring
->next_to_clean
,
6741 tx_buffer
->time_stamp
,
6742 tx_buffer
->next_to_watch
,
6744 tx_buffer
->next_to_watch
->wb
.status
);
6745 netif_stop_subqueue(tx_ring
->netdev
,
6746 tx_ring
->queue_index
);
6748 /* we are about to reset, no point in enabling stuff */
6753 #define TX_WAKE_THRESHOLD (DESC_NEEDED * 2)
6754 if (unlikely(total_packets
&&
6755 netif_carrier_ok(tx_ring
->netdev
) &&
6756 igb_desc_unused(tx_ring
) >= TX_WAKE_THRESHOLD
)) {
6757 /* Make sure that anybody stopping the queue after this
6758 * sees the new next_to_clean.
6761 if (__netif_subqueue_stopped(tx_ring
->netdev
,
6762 tx_ring
->queue_index
) &&
6763 !(test_bit(__IGB_DOWN
, &adapter
->state
))) {
6764 netif_wake_subqueue(tx_ring
->netdev
,
6765 tx_ring
->queue_index
);
6767 u64_stats_update_begin(&tx_ring
->tx_syncp
);
6768 tx_ring
->tx_stats
.restart_queue
++;
6769 u64_stats_update_end(&tx_ring
->tx_syncp
);
6777 * igb_reuse_rx_page - page flip buffer and store it back on the ring
6778 * @rx_ring: rx descriptor ring to store buffers on
6779 * @old_buff: donor buffer to have page reused
6781 * Synchronizes page for reuse by the adapter
6783 static void igb_reuse_rx_page(struct igb_ring
*rx_ring
,
6784 struct igb_rx_buffer
*old_buff
)
6786 struct igb_rx_buffer
*new_buff
;
6787 u16 nta
= rx_ring
->next_to_alloc
;
6789 new_buff
= &rx_ring
->rx_buffer_info
[nta
];
6791 /* update, and store next to alloc */
6793 rx_ring
->next_to_alloc
= (nta
< rx_ring
->count
) ? nta
: 0;
6795 /* transfer page from old buffer to new buffer */
6796 *new_buff
= *old_buff
;
6798 /* sync the buffer for use by the device */
6799 dma_sync_single_range_for_device(rx_ring
->dev
, old_buff
->dma
,
6800 old_buff
->page_offset
,
6805 static inline bool igb_page_is_reserved(struct page
*page
)
6807 return (page_to_nid(page
) != numa_mem_id()) || page_is_pfmemalloc(page
);
6810 static bool igb_can_reuse_rx_page(struct igb_rx_buffer
*rx_buffer
,
6812 unsigned int truesize
)
6814 /* avoid re-using remote pages */
6815 if (unlikely(igb_page_is_reserved(page
)))
6818 #if (PAGE_SIZE < 8192)
6819 /* if we are only owner of page we can reuse it */
6820 if (unlikely(page_count(page
) != 1))
6823 /* flip page offset to other buffer */
6824 rx_buffer
->page_offset
^= IGB_RX_BUFSZ
;
6826 /* move offset up to the next cache line */
6827 rx_buffer
->page_offset
+= truesize
;
6829 if (rx_buffer
->page_offset
> (PAGE_SIZE
- IGB_RX_BUFSZ
))
6833 /* Even if we own the page, we are not allowed to use atomic_set()
6834 * This would break get_page_unless_zero() users.
6842 * igb_add_rx_frag - Add contents of Rx buffer to sk_buff
6843 * @rx_ring: rx descriptor ring to transact packets on
6844 * @rx_buffer: buffer containing page to add
6845 * @rx_desc: descriptor containing length of buffer written by hardware
6846 * @skb: sk_buff to place the data into
6848 * This function will add the data contained in rx_buffer->page to the skb.
6849 * This is done either through a direct copy if the data in the buffer is
6850 * less than the skb header size, otherwise it will just attach the page as
6851 * a frag to the skb.
6853 * The function will then update the page offset if necessary and return
6854 * true if the buffer can be reused by the adapter.
6856 static bool igb_add_rx_frag(struct igb_ring
*rx_ring
,
6857 struct igb_rx_buffer
*rx_buffer
,
6858 union e1000_adv_rx_desc
*rx_desc
,
6859 struct sk_buff
*skb
)
6861 struct page
*page
= rx_buffer
->page
;
6862 unsigned char *va
= page_address(page
) + rx_buffer
->page_offset
;
6863 unsigned int size
= le16_to_cpu(rx_desc
->wb
.upper
.length
);
6864 #if (PAGE_SIZE < 8192)
6865 unsigned int truesize
= IGB_RX_BUFSZ
;
6867 unsigned int truesize
= SKB_DATA_ALIGN(size
);
6869 unsigned int pull_len
;
6871 if (unlikely(skb_is_nonlinear(skb
)))
6874 if (unlikely(igb_test_staterr(rx_desc
, E1000_RXDADV_STAT_TSIP
))) {
6875 igb_ptp_rx_pktstamp(rx_ring
->q_vector
, va
, skb
);
6876 va
+= IGB_TS_HDR_LEN
;
6877 size
-= IGB_TS_HDR_LEN
;
6880 if (likely(size
<= IGB_RX_HDR_LEN
)) {
6881 memcpy(__skb_put(skb
, size
), va
, ALIGN(size
, sizeof(long)));
6883 /* page is not reserved, we can reuse buffer as-is */
6884 if (likely(!igb_page_is_reserved(page
)))
6887 /* this page cannot be reused so discard it */
6892 /* we need the header to contain the greater of either ETH_HLEN or
6893 * 60 bytes if the skb->len is less than 60 for skb_pad.
6895 pull_len
= eth_get_headlen(va
, IGB_RX_HDR_LEN
);
6897 /* align pull length to size of long to optimize memcpy performance */
6898 memcpy(__skb_put(skb
, pull_len
), va
, ALIGN(pull_len
, sizeof(long)));
6900 /* update all of the pointers */
6905 skb_add_rx_frag(skb
, skb_shinfo(skb
)->nr_frags
, page
,
6906 (unsigned long)va
& ~PAGE_MASK
, size
, truesize
);
6908 return igb_can_reuse_rx_page(rx_buffer
, page
, truesize
);
6911 static struct sk_buff
*igb_fetch_rx_buffer(struct igb_ring
*rx_ring
,
6912 union e1000_adv_rx_desc
*rx_desc
,
6913 struct sk_buff
*skb
)
6915 struct igb_rx_buffer
*rx_buffer
;
6918 rx_buffer
= &rx_ring
->rx_buffer_info
[rx_ring
->next_to_clean
];
6919 page
= rx_buffer
->page
;
6923 void *page_addr
= page_address(page
) +
6924 rx_buffer
->page_offset
;
6926 /* prefetch first cache line of first page */
6927 prefetch(page_addr
);
6928 #if L1_CACHE_BYTES < 128
6929 prefetch(page_addr
+ L1_CACHE_BYTES
);
6932 /* allocate a skb to store the frags */
6933 skb
= napi_alloc_skb(&rx_ring
->q_vector
->napi
, IGB_RX_HDR_LEN
);
6934 if (unlikely(!skb
)) {
6935 rx_ring
->rx_stats
.alloc_failed
++;
6939 /* we will be copying header into skb->data in
6940 * pskb_may_pull so it is in our interest to prefetch
6941 * it now to avoid a possible cache miss
6943 prefetchw(skb
->data
);
6946 /* we are reusing so sync this buffer for CPU use */
6947 dma_sync_single_range_for_cpu(rx_ring
->dev
,
6949 rx_buffer
->page_offset
,
6953 /* pull page into skb */
6954 if (igb_add_rx_frag(rx_ring
, rx_buffer
, rx_desc
, skb
)) {
6955 /* hand second half of page back to the ring */
6956 igb_reuse_rx_page(rx_ring
, rx_buffer
);
6958 /* we are not reusing the buffer so unmap it */
6959 dma_unmap_page(rx_ring
->dev
, rx_buffer
->dma
,
6960 PAGE_SIZE
, DMA_FROM_DEVICE
);
6963 /* clear contents of rx_buffer */
6964 rx_buffer
->page
= NULL
;
6969 static inline void igb_rx_checksum(struct igb_ring
*ring
,
6970 union e1000_adv_rx_desc
*rx_desc
,
6971 struct sk_buff
*skb
)
6973 skb_checksum_none_assert(skb
);
6975 /* Ignore Checksum bit is set */
6976 if (igb_test_staterr(rx_desc
, E1000_RXD_STAT_IXSM
))
6979 /* Rx checksum disabled via ethtool */
6980 if (!(ring
->netdev
->features
& NETIF_F_RXCSUM
))
6983 /* TCP/UDP checksum error bit is set */
6984 if (igb_test_staterr(rx_desc
,
6985 E1000_RXDEXT_STATERR_TCPE
|
6986 E1000_RXDEXT_STATERR_IPE
)) {
6987 /* work around errata with sctp packets where the TCPE aka
6988 * L4E bit is set incorrectly on 64 byte (60 byte w/o crc)
6989 * packets, (aka let the stack check the crc32c)
6991 if (!((skb
->len
== 60) &&
6992 test_bit(IGB_RING_FLAG_RX_SCTP_CSUM
, &ring
->flags
))) {
6993 u64_stats_update_begin(&ring
->rx_syncp
);
6994 ring
->rx_stats
.csum_err
++;
6995 u64_stats_update_end(&ring
->rx_syncp
);
6997 /* let the stack verify checksum errors */
7000 /* It must be a TCP or UDP packet with a valid checksum */
7001 if (igb_test_staterr(rx_desc
, E1000_RXD_STAT_TCPCS
|
7002 E1000_RXD_STAT_UDPCS
))
7003 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
7005 dev_dbg(ring
->dev
, "cksum success: bits %08X\n",
7006 le32_to_cpu(rx_desc
->wb
.upper
.status_error
));
7009 static inline void igb_rx_hash(struct igb_ring
*ring
,
7010 union e1000_adv_rx_desc
*rx_desc
,
7011 struct sk_buff
*skb
)
7013 if (ring
->netdev
->features
& NETIF_F_RXHASH
)
7015 le32_to_cpu(rx_desc
->wb
.lower
.hi_dword
.rss
),
7020 * igb_is_non_eop - process handling of non-EOP buffers
7021 * @rx_ring: Rx ring being processed
7022 * @rx_desc: Rx descriptor for current buffer
7023 * @skb: current socket buffer containing buffer in progress
7025 * This function updates next to clean. If the buffer is an EOP buffer
7026 * this function exits returning false, otherwise it will place the
7027 * sk_buff in the next buffer to be chained and return true indicating
7028 * that this is in fact a non-EOP buffer.
7030 static bool igb_is_non_eop(struct igb_ring
*rx_ring
,
7031 union e1000_adv_rx_desc
*rx_desc
)
7033 u32 ntc
= rx_ring
->next_to_clean
+ 1;
7035 /* fetch, update, and store next to clean */
7036 ntc
= (ntc
< rx_ring
->count
) ? ntc
: 0;
7037 rx_ring
->next_to_clean
= ntc
;
7039 prefetch(IGB_RX_DESC(rx_ring
, ntc
));
7041 if (likely(igb_test_staterr(rx_desc
, E1000_RXD_STAT_EOP
)))
7048 * igb_cleanup_headers - Correct corrupted or empty headers
7049 * @rx_ring: rx descriptor ring packet is being transacted on
7050 * @rx_desc: pointer to the EOP Rx descriptor
7051 * @skb: pointer to current skb being fixed
7053 * Address the case where we are pulling data in on pages only
7054 * and as such no data is present in the skb header.
7056 * In addition if skb is not at least 60 bytes we need to pad it so that
7057 * it is large enough to qualify as a valid Ethernet frame.
7059 * Returns true if an error was encountered and skb was freed.
7061 static bool igb_cleanup_headers(struct igb_ring
*rx_ring
,
7062 union e1000_adv_rx_desc
*rx_desc
,
7063 struct sk_buff
*skb
)
7065 if (unlikely((igb_test_staterr(rx_desc
,
7066 E1000_RXDEXT_ERR_FRAME_ERR_MASK
)))) {
7067 struct net_device
*netdev
= rx_ring
->netdev
;
7068 if (!(netdev
->features
& NETIF_F_RXALL
)) {
7069 dev_kfree_skb_any(skb
);
7074 /* if eth_skb_pad returns an error the skb was freed */
7075 if (eth_skb_pad(skb
))
7082 * igb_process_skb_fields - Populate skb header fields from Rx descriptor
7083 * @rx_ring: rx descriptor ring packet is being transacted on
7084 * @rx_desc: pointer to the EOP Rx descriptor
7085 * @skb: pointer to current skb being populated
7087 * This function checks the ring, descriptor, and packet information in
7088 * order to populate the hash, checksum, VLAN, timestamp, protocol, and
7089 * other fields within the skb.
7091 static void igb_process_skb_fields(struct igb_ring
*rx_ring
,
7092 union e1000_adv_rx_desc
*rx_desc
,
7093 struct sk_buff
*skb
)
7095 struct net_device
*dev
= rx_ring
->netdev
;
7097 igb_rx_hash(rx_ring
, rx_desc
, skb
);
7099 igb_rx_checksum(rx_ring
, rx_desc
, skb
);
7101 if (igb_test_staterr(rx_desc
, E1000_RXDADV_STAT_TS
) &&
7102 !igb_test_staterr(rx_desc
, E1000_RXDADV_STAT_TSIP
))
7103 igb_ptp_rx_rgtstamp(rx_ring
->q_vector
, skb
);
7105 if ((dev
->features
& NETIF_F_HW_VLAN_CTAG_RX
) &&
7106 igb_test_staterr(rx_desc
, E1000_RXD_STAT_VP
)) {
7109 if (igb_test_staterr(rx_desc
, E1000_RXDEXT_STATERR_LB
) &&
7110 test_bit(IGB_RING_FLAG_RX_LB_VLAN_BSWAP
, &rx_ring
->flags
))
7111 vid
= be16_to_cpu(rx_desc
->wb
.upper
.vlan
);
7113 vid
= le16_to_cpu(rx_desc
->wb
.upper
.vlan
);
7115 __vlan_hwaccel_put_tag(skb
, htons(ETH_P_8021Q
), vid
);
7118 skb_record_rx_queue(skb
, rx_ring
->queue_index
);
7120 skb
->protocol
= eth_type_trans(skb
, rx_ring
->netdev
);
7123 static int igb_clean_rx_irq(struct igb_q_vector
*q_vector
, const int budget
)
7125 struct igb_ring
*rx_ring
= q_vector
->rx
.ring
;
7126 struct sk_buff
*skb
= rx_ring
->skb
;
7127 unsigned int total_bytes
= 0, total_packets
= 0;
7128 u16 cleaned_count
= igb_desc_unused(rx_ring
);
7130 while (likely(total_packets
< budget
)) {
7131 union e1000_adv_rx_desc
*rx_desc
;
7133 /* return some buffers to hardware, one at a time is too slow */
7134 if (cleaned_count
>= IGB_RX_BUFFER_WRITE
) {
7135 igb_alloc_rx_buffers(rx_ring
, cleaned_count
);
7139 rx_desc
= IGB_RX_DESC(rx_ring
, rx_ring
->next_to_clean
);
7141 if (!rx_desc
->wb
.upper
.status_error
)
7144 /* This memory barrier is needed to keep us from reading
7145 * any other fields out of the rx_desc until we know the
7146 * descriptor has been written back
7150 /* retrieve a buffer from the ring */
7151 skb
= igb_fetch_rx_buffer(rx_ring
, rx_desc
, skb
);
7153 /* exit if we failed to retrieve a buffer */
7159 /* fetch next buffer in frame if non-eop */
7160 if (igb_is_non_eop(rx_ring
, rx_desc
))
7163 /* verify the packet layout is correct */
7164 if (igb_cleanup_headers(rx_ring
, rx_desc
, skb
)) {
7169 /* probably a little skewed due to removing CRC */
7170 total_bytes
+= skb
->len
;
7172 /* populate checksum, timestamp, VLAN, and protocol */
7173 igb_process_skb_fields(rx_ring
, rx_desc
, skb
);
7175 napi_gro_receive(&q_vector
->napi
, skb
);
7177 /* reset skb pointer */
7180 /* update budget accounting */
7184 /* place incomplete frames back on ring for completion */
7187 u64_stats_update_begin(&rx_ring
->rx_syncp
);
7188 rx_ring
->rx_stats
.packets
+= total_packets
;
7189 rx_ring
->rx_stats
.bytes
+= total_bytes
;
7190 u64_stats_update_end(&rx_ring
->rx_syncp
);
7191 q_vector
->rx
.total_packets
+= total_packets
;
7192 q_vector
->rx
.total_bytes
+= total_bytes
;
7195 igb_alloc_rx_buffers(rx_ring
, cleaned_count
);
7197 return total_packets
;
7200 static bool igb_alloc_mapped_page(struct igb_ring
*rx_ring
,
7201 struct igb_rx_buffer
*bi
)
7203 struct page
*page
= bi
->page
;
7206 /* since we are recycling buffers we should seldom need to alloc */
7210 /* alloc new page for storage */
7211 page
= dev_alloc_page();
7212 if (unlikely(!page
)) {
7213 rx_ring
->rx_stats
.alloc_failed
++;
7217 /* map page for use */
7218 dma
= dma_map_page(rx_ring
->dev
, page
, 0, PAGE_SIZE
, DMA_FROM_DEVICE
);
7220 /* if mapping failed free memory back to system since
7221 * there isn't much point in holding memory we can't use
7223 if (dma_mapping_error(rx_ring
->dev
, dma
)) {
7226 rx_ring
->rx_stats
.alloc_failed
++;
7232 bi
->page_offset
= 0;
7238 * igb_alloc_rx_buffers - Replace used receive buffers; packet split
7239 * @adapter: address of board private structure
7241 void igb_alloc_rx_buffers(struct igb_ring
*rx_ring
, u16 cleaned_count
)
7243 union e1000_adv_rx_desc
*rx_desc
;
7244 struct igb_rx_buffer
*bi
;
7245 u16 i
= rx_ring
->next_to_use
;
7251 rx_desc
= IGB_RX_DESC(rx_ring
, i
);
7252 bi
= &rx_ring
->rx_buffer_info
[i
];
7253 i
-= rx_ring
->count
;
7256 if (!igb_alloc_mapped_page(rx_ring
, bi
))
7259 /* Refresh the desc even if buffer_addrs didn't change
7260 * because each write-back erases this info.
7262 rx_desc
->read
.pkt_addr
= cpu_to_le64(bi
->dma
+ bi
->page_offset
);
7268 rx_desc
= IGB_RX_DESC(rx_ring
, 0);
7269 bi
= rx_ring
->rx_buffer_info
;
7270 i
-= rx_ring
->count
;
7273 /* clear the status bits for the next_to_use descriptor */
7274 rx_desc
->wb
.upper
.status_error
= 0;
7277 } while (cleaned_count
);
7279 i
+= rx_ring
->count
;
7281 if (rx_ring
->next_to_use
!= i
) {
7282 /* record the next descriptor to use */
7283 rx_ring
->next_to_use
= i
;
7285 /* update next to alloc since we have filled the ring */
7286 rx_ring
->next_to_alloc
= i
;
7288 /* Force memory writes to complete before letting h/w
7289 * know there are new descriptors to fetch. (Only
7290 * applicable for weak-ordered memory model archs,
7294 writel(i
, rx_ring
->tail
);
7304 static int igb_mii_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
7306 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7307 struct mii_ioctl_data
*data
= if_mii(ifr
);
7309 if (adapter
->hw
.phy
.media_type
!= e1000_media_type_copper
)
7314 data
->phy_id
= adapter
->hw
.phy
.addr
;
7317 if (igb_read_phy_reg(&adapter
->hw
, data
->reg_num
& 0x1F,
7334 static int igb_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
7340 return igb_mii_ioctl(netdev
, ifr
, cmd
);
7342 return igb_ptp_get_ts_config(netdev
, ifr
);
7344 return igb_ptp_set_ts_config(netdev
, ifr
);
7350 void igb_read_pci_cfg(struct e1000_hw
*hw
, u32 reg
, u16
*value
)
7352 struct igb_adapter
*adapter
= hw
->back
;
7354 pci_read_config_word(adapter
->pdev
, reg
, value
);
7357 void igb_write_pci_cfg(struct e1000_hw
*hw
, u32 reg
, u16
*value
)
7359 struct igb_adapter
*adapter
= hw
->back
;
7361 pci_write_config_word(adapter
->pdev
, reg
, *value
);
7364 s32
igb_read_pcie_cap_reg(struct e1000_hw
*hw
, u32 reg
, u16
*value
)
7366 struct igb_adapter
*adapter
= hw
->back
;
7368 if (pcie_capability_read_word(adapter
->pdev
, reg
, value
))
7369 return -E1000_ERR_CONFIG
;
7374 s32
igb_write_pcie_cap_reg(struct e1000_hw
*hw
, u32 reg
, u16
*value
)
7376 struct igb_adapter
*adapter
= hw
->back
;
7378 if (pcie_capability_write_word(adapter
->pdev
, reg
, *value
))
7379 return -E1000_ERR_CONFIG
;
7384 static void igb_vlan_mode(struct net_device
*netdev
, netdev_features_t features
)
7386 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7387 struct e1000_hw
*hw
= &adapter
->hw
;
7389 bool enable
= !!(features
& NETIF_F_HW_VLAN_CTAG_RX
);
7392 /* enable VLAN tag insert/strip */
7393 ctrl
= rd32(E1000_CTRL
);
7394 ctrl
|= E1000_CTRL_VME
;
7395 wr32(E1000_CTRL
, ctrl
);
7397 /* Disable CFI check */
7398 rctl
= rd32(E1000_RCTL
);
7399 rctl
&= ~E1000_RCTL_CFIEN
;
7400 wr32(E1000_RCTL
, rctl
);
7402 /* disable VLAN tag insert/strip */
7403 ctrl
= rd32(E1000_CTRL
);
7404 ctrl
&= ~E1000_CTRL_VME
;
7405 wr32(E1000_CTRL
, ctrl
);
7408 igb_set_vf_vlan_strip(adapter
, adapter
->vfs_allocated_count
, enable
);
7411 static int igb_vlan_rx_add_vid(struct net_device
*netdev
,
7412 __be16 proto
, u16 vid
)
7414 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7415 struct e1000_hw
*hw
= &adapter
->hw
;
7416 int pf_id
= adapter
->vfs_allocated_count
;
7418 /* add the filter since PF can receive vlans w/o entry in vlvf */
7419 if (!vid
|| !(adapter
->flags
& IGB_FLAG_VLAN_PROMISC
))
7420 igb_vfta_set(hw
, vid
, pf_id
, true, !!vid
);
7422 set_bit(vid
, adapter
->active_vlans
);
7427 static int igb_vlan_rx_kill_vid(struct net_device
*netdev
,
7428 __be16 proto
, u16 vid
)
7430 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7431 int pf_id
= adapter
->vfs_allocated_count
;
7432 struct e1000_hw
*hw
= &adapter
->hw
;
7434 /* remove VID from filter table */
7435 if (vid
&& !(adapter
->flags
& IGB_FLAG_VLAN_PROMISC
))
7436 igb_vfta_set(hw
, vid
, pf_id
, false, true);
7438 clear_bit(vid
, adapter
->active_vlans
);
7443 static void igb_restore_vlan(struct igb_adapter
*adapter
)
7447 igb_vlan_mode(adapter
->netdev
, adapter
->netdev
->features
);
7448 igb_vlan_rx_add_vid(adapter
->netdev
, htons(ETH_P_8021Q
), 0);
7450 for_each_set_bit_from(vid
, adapter
->active_vlans
, VLAN_N_VID
)
7451 igb_vlan_rx_add_vid(adapter
->netdev
, htons(ETH_P_8021Q
), vid
);
7454 int igb_set_spd_dplx(struct igb_adapter
*adapter
, u32 spd
, u8 dplx
)
7456 struct pci_dev
*pdev
= adapter
->pdev
;
7457 struct e1000_mac_info
*mac
= &adapter
->hw
.mac
;
7461 /* Make sure dplx is at most 1 bit and lsb of speed is not set
7462 * for the switch() below to work
7464 if ((spd
& 1) || (dplx
& ~1))
7467 /* Fiber NIC's only allow 1000 gbps Full duplex
7468 * and 100Mbps Full duplex for 100baseFx sfp
7470 if (adapter
->hw
.phy
.media_type
== e1000_media_type_internal_serdes
) {
7471 switch (spd
+ dplx
) {
7472 case SPEED_10
+ DUPLEX_HALF
:
7473 case SPEED_10
+ DUPLEX_FULL
:
7474 case SPEED_100
+ DUPLEX_HALF
:
7481 switch (spd
+ dplx
) {
7482 case SPEED_10
+ DUPLEX_HALF
:
7483 mac
->forced_speed_duplex
= ADVERTISE_10_HALF
;
7485 case SPEED_10
+ DUPLEX_FULL
:
7486 mac
->forced_speed_duplex
= ADVERTISE_10_FULL
;
7488 case SPEED_100
+ DUPLEX_HALF
:
7489 mac
->forced_speed_duplex
= ADVERTISE_100_HALF
;
7491 case SPEED_100
+ DUPLEX_FULL
:
7492 mac
->forced_speed_duplex
= ADVERTISE_100_FULL
;
7494 case SPEED_1000
+ DUPLEX_FULL
:
7496 adapter
->hw
.phy
.autoneg_advertised
= ADVERTISE_1000_FULL
;
7498 case SPEED_1000
+ DUPLEX_HALF
: /* not supported */
7503 /* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
7504 adapter
->hw
.phy
.mdix
= AUTO_ALL_MODES
;
7509 dev_err(&pdev
->dev
, "Unsupported Speed/Duplex configuration\n");
7513 static int __igb_shutdown(struct pci_dev
*pdev
, bool *enable_wake
,
7516 struct net_device
*netdev
= pci_get_drvdata(pdev
);
7517 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7518 struct e1000_hw
*hw
= &adapter
->hw
;
7519 u32 ctrl
, rctl
, status
;
7520 u32 wufc
= runtime
? E1000_WUFC_LNKC
: adapter
->wol
;
7525 netif_device_detach(netdev
);
7527 if (netif_running(netdev
))
7528 __igb_close(netdev
, true);
7530 igb_clear_interrupt_scheme(adapter
);
7533 retval
= pci_save_state(pdev
);
7538 status
= rd32(E1000_STATUS
);
7539 if (status
& E1000_STATUS_LU
)
7540 wufc
&= ~E1000_WUFC_LNKC
;
7543 igb_setup_rctl(adapter
);
7544 igb_set_rx_mode(netdev
);
7546 /* turn on all-multi mode if wake on multicast is enabled */
7547 if (wufc
& E1000_WUFC_MC
) {
7548 rctl
= rd32(E1000_RCTL
);
7549 rctl
|= E1000_RCTL_MPE
;
7550 wr32(E1000_RCTL
, rctl
);
7553 ctrl
= rd32(E1000_CTRL
);
7554 /* advertise wake from D3Cold */
7555 #define E1000_CTRL_ADVD3WUC 0x00100000
7556 /* phy power management enable */
7557 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
7558 ctrl
|= E1000_CTRL_ADVD3WUC
;
7559 wr32(E1000_CTRL
, ctrl
);
7561 /* Allow time for pending master requests to run */
7562 igb_disable_pcie_master(hw
);
7564 wr32(E1000_WUC
, E1000_WUC_PME_EN
);
7565 wr32(E1000_WUFC
, wufc
);
7568 wr32(E1000_WUFC
, 0);
7571 *enable_wake
= wufc
|| adapter
->en_mng_pt
;
7573 igb_power_down_link(adapter
);
7575 igb_power_up_link(adapter
);
7577 /* Release control of h/w to f/w. If f/w is AMT enabled, this
7578 * would have already happened in close and is redundant.
7580 igb_release_hw_control(adapter
);
7582 pci_disable_device(pdev
);
7588 #ifdef CONFIG_PM_SLEEP
7589 static int igb_suspend(struct device
*dev
)
7593 struct pci_dev
*pdev
= to_pci_dev(dev
);
7595 retval
= __igb_shutdown(pdev
, &wake
, 0);
7600 pci_prepare_to_sleep(pdev
);
7602 pci_wake_from_d3(pdev
, false);
7603 pci_set_power_state(pdev
, PCI_D3hot
);
7608 #endif /* CONFIG_PM_SLEEP */
7610 static int igb_resume(struct device
*dev
)
7612 struct pci_dev
*pdev
= to_pci_dev(dev
);
7613 struct net_device
*netdev
= pci_get_drvdata(pdev
);
7614 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7615 struct e1000_hw
*hw
= &adapter
->hw
;
7618 pci_set_power_state(pdev
, PCI_D0
);
7619 pci_restore_state(pdev
);
7620 pci_save_state(pdev
);
7622 if (!pci_device_is_present(pdev
))
7624 err
= pci_enable_device_mem(pdev
);
7627 "igb: Cannot enable PCI device from suspend\n");
7630 pci_set_master(pdev
);
7632 pci_enable_wake(pdev
, PCI_D3hot
, 0);
7633 pci_enable_wake(pdev
, PCI_D3cold
, 0);
7635 if (igb_init_interrupt_scheme(adapter
, true)) {
7636 dev_err(&pdev
->dev
, "Unable to allocate memory for queues\n");
7642 /* let the f/w know that the h/w is now under the control of the
7645 igb_get_hw_control(adapter
);
7647 wr32(E1000_WUS
, ~0);
7649 if (netdev
->flags
& IFF_UP
) {
7651 err
= __igb_open(netdev
, true);
7657 netif_device_attach(netdev
);
7661 static int igb_runtime_idle(struct device
*dev
)
7663 struct pci_dev
*pdev
= to_pci_dev(dev
);
7664 struct net_device
*netdev
= pci_get_drvdata(pdev
);
7665 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7667 if (!igb_has_link(adapter
))
7668 pm_schedule_suspend(dev
, MSEC_PER_SEC
* 5);
7673 static int igb_runtime_suspend(struct device
*dev
)
7675 struct pci_dev
*pdev
= to_pci_dev(dev
);
7679 retval
= __igb_shutdown(pdev
, &wake
, 1);
7684 pci_prepare_to_sleep(pdev
);
7686 pci_wake_from_d3(pdev
, false);
7687 pci_set_power_state(pdev
, PCI_D3hot
);
7693 static int igb_runtime_resume(struct device
*dev
)
7695 return igb_resume(dev
);
7697 #endif /* CONFIG_PM */
7699 static void igb_shutdown(struct pci_dev
*pdev
)
7703 __igb_shutdown(pdev
, &wake
, 0);
7705 if (system_state
== SYSTEM_POWER_OFF
) {
7706 pci_wake_from_d3(pdev
, wake
);
7707 pci_set_power_state(pdev
, PCI_D3hot
);
7711 #ifdef CONFIG_PCI_IOV
7712 static int igb_sriov_reinit(struct pci_dev
*dev
)
7714 struct net_device
*netdev
= pci_get_drvdata(dev
);
7715 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7716 struct pci_dev
*pdev
= adapter
->pdev
;
7720 if (netif_running(netdev
))
7725 igb_clear_interrupt_scheme(adapter
);
7727 igb_init_queue_configuration(adapter
);
7729 if (igb_init_interrupt_scheme(adapter
, true)) {
7731 dev_err(&pdev
->dev
, "Unable to allocate memory for queues\n");
7735 if (netif_running(netdev
))
7743 static int igb_pci_disable_sriov(struct pci_dev
*dev
)
7745 int err
= igb_disable_sriov(dev
);
7748 err
= igb_sriov_reinit(dev
);
7753 static int igb_pci_enable_sriov(struct pci_dev
*dev
, int num_vfs
)
7755 int err
= igb_enable_sriov(dev
, num_vfs
);
7760 err
= igb_sriov_reinit(dev
);
7769 static int igb_pci_sriov_configure(struct pci_dev
*dev
, int num_vfs
)
7771 #ifdef CONFIG_PCI_IOV
7773 return igb_pci_disable_sriov(dev
);
7775 return igb_pci_enable_sriov(dev
, num_vfs
);
7780 #ifdef CONFIG_NET_POLL_CONTROLLER
7781 /* Polling 'interrupt' - used by things like netconsole to send skbs
7782 * without having to re-enable interrupts. It's not called while
7783 * the interrupt routine is executing.
7785 static void igb_netpoll(struct net_device
*netdev
)
7787 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7788 struct e1000_hw
*hw
= &adapter
->hw
;
7789 struct igb_q_vector
*q_vector
;
7792 for (i
= 0; i
< adapter
->num_q_vectors
; i
++) {
7793 q_vector
= adapter
->q_vector
[i
];
7794 if (adapter
->flags
& IGB_FLAG_HAS_MSIX
)
7795 wr32(E1000_EIMC
, q_vector
->eims_value
);
7797 igb_irq_disable(adapter
);
7798 napi_schedule(&q_vector
->napi
);
7801 #endif /* CONFIG_NET_POLL_CONTROLLER */
7804 * igb_io_error_detected - called when PCI error is detected
7805 * @pdev: Pointer to PCI device
7806 * @state: The current pci connection state
7808 * This function is called after a PCI bus error affecting
7809 * this device has been detected.
7811 static pci_ers_result_t
igb_io_error_detected(struct pci_dev
*pdev
,
7812 pci_channel_state_t state
)
7814 struct net_device
*netdev
= pci_get_drvdata(pdev
);
7815 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7817 netif_device_detach(netdev
);
7819 if (state
== pci_channel_io_perm_failure
)
7820 return PCI_ERS_RESULT_DISCONNECT
;
7822 if (netif_running(netdev
))
7824 pci_disable_device(pdev
);
7826 /* Request a slot slot reset. */
7827 return PCI_ERS_RESULT_NEED_RESET
;
7831 * igb_io_slot_reset - called after the pci bus has been reset.
7832 * @pdev: Pointer to PCI device
7834 * Restart the card from scratch, as if from a cold-boot. Implementation
7835 * resembles the first-half of the igb_resume routine.
7837 static pci_ers_result_t
igb_io_slot_reset(struct pci_dev
*pdev
)
7839 struct net_device
*netdev
= pci_get_drvdata(pdev
);
7840 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7841 struct e1000_hw
*hw
= &adapter
->hw
;
7842 pci_ers_result_t result
;
7845 if (pci_enable_device_mem(pdev
)) {
7847 "Cannot re-enable PCI device after reset.\n");
7848 result
= PCI_ERS_RESULT_DISCONNECT
;
7850 pci_set_master(pdev
);
7851 pci_restore_state(pdev
);
7852 pci_save_state(pdev
);
7854 pci_enable_wake(pdev
, PCI_D3hot
, 0);
7855 pci_enable_wake(pdev
, PCI_D3cold
, 0);
7858 wr32(E1000_WUS
, ~0);
7859 result
= PCI_ERS_RESULT_RECOVERED
;
7862 err
= pci_cleanup_aer_uncorrect_error_status(pdev
);
7865 "pci_cleanup_aer_uncorrect_error_status failed 0x%0x\n",
7867 /* non-fatal, continue */
7874 * igb_io_resume - called when traffic can start flowing again.
7875 * @pdev: Pointer to PCI device
7877 * This callback is called when the error recovery driver tells us that
7878 * its OK to resume normal operation. Implementation resembles the
7879 * second-half of the igb_resume routine.
7881 static void igb_io_resume(struct pci_dev
*pdev
)
7883 struct net_device
*netdev
= pci_get_drvdata(pdev
);
7884 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7886 if (netif_running(netdev
)) {
7887 if (igb_up(adapter
)) {
7888 dev_err(&pdev
->dev
, "igb_up failed after reset\n");
7893 netif_device_attach(netdev
);
7895 /* let the f/w know that the h/w is now under the control of the
7898 igb_get_hw_control(adapter
);
7901 static void igb_rar_set_qsel(struct igb_adapter
*adapter
, u8
*addr
, u32 index
,
7904 struct e1000_hw
*hw
= &adapter
->hw
;
7905 u32 rar_low
, rar_high
;
7907 /* HW expects these to be in network order when they are plugged
7908 * into the registers which are little endian. In order to guarantee
7909 * that ordering we need to do an leXX_to_cpup here in order to be
7910 * ready for the byteswap that occurs with writel
7912 rar_low
= le32_to_cpup((__le32
*)(addr
));
7913 rar_high
= le16_to_cpup((__le16
*)(addr
+ 4));
7915 /* Indicate to hardware the Address is Valid. */
7916 rar_high
|= E1000_RAH_AV
;
7918 if (hw
->mac
.type
== e1000_82575
)
7919 rar_high
|= E1000_RAH_POOL_1
* qsel
;
7921 rar_high
|= E1000_RAH_POOL_1
<< qsel
;
7923 wr32(E1000_RAL(index
), rar_low
);
7925 wr32(E1000_RAH(index
), rar_high
);
7929 static int igb_set_vf_mac(struct igb_adapter
*adapter
,
7930 int vf
, unsigned char *mac_addr
)
7932 struct e1000_hw
*hw
= &adapter
->hw
;
7933 /* VF MAC addresses start at end of receive addresses and moves
7934 * towards the first, as a result a collision should not be possible
7936 int rar_entry
= hw
->mac
.rar_entry_count
- (vf
+ 1);
7938 memcpy(adapter
->vf_data
[vf
].vf_mac_addresses
, mac_addr
, ETH_ALEN
);
7940 igb_rar_set_qsel(adapter
, mac_addr
, rar_entry
, vf
);
7945 static int igb_ndo_set_vf_mac(struct net_device
*netdev
, int vf
, u8
*mac
)
7947 struct igb_adapter
*adapter
= netdev_priv(netdev
);
7948 if (!is_valid_ether_addr(mac
) || (vf
>= adapter
->vfs_allocated_count
))
7950 adapter
->vf_data
[vf
].flags
|= IGB_VF_FLAG_PF_SET_MAC
;
7951 dev_info(&adapter
->pdev
->dev
, "setting MAC %pM on VF %d\n", mac
, vf
);
7952 dev_info(&adapter
->pdev
->dev
,
7953 "Reload the VF driver to make this change effective.");
7954 if (test_bit(__IGB_DOWN
, &adapter
->state
)) {
7955 dev_warn(&adapter
->pdev
->dev
,
7956 "The VF MAC address has been set, but the PF device is not up.\n");
7957 dev_warn(&adapter
->pdev
->dev
,
7958 "Bring the PF device up before attempting to use the VF device.\n");
7960 return igb_set_vf_mac(adapter
, vf
, mac
);
7963 static int igb_link_mbps(int internal_link_speed
)
7965 switch (internal_link_speed
) {
7975 static void igb_set_vf_rate_limit(struct e1000_hw
*hw
, int vf
, int tx_rate
,
7982 /* Calculate the rate factor values to set */
7983 rf_int
= link_speed
/ tx_rate
;
7984 rf_dec
= (link_speed
- (rf_int
* tx_rate
));
7985 rf_dec
= (rf_dec
* BIT(E1000_RTTBCNRC_RF_INT_SHIFT
)) /
7988 bcnrc_val
= E1000_RTTBCNRC_RS_ENA
;
7989 bcnrc_val
|= ((rf_int
<< E1000_RTTBCNRC_RF_INT_SHIFT
) &
7990 E1000_RTTBCNRC_RF_INT_MASK
);
7991 bcnrc_val
|= (rf_dec
& E1000_RTTBCNRC_RF_DEC_MASK
);
7996 wr32(E1000_RTTDQSEL
, vf
); /* vf X uses queue X */
7997 /* Set global transmit compensation time to the MMW_SIZE in RTTBCNRM
7998 * register. MMW_SIZE=0x014 if 9728-byte jumbo is supported.
8000 wr32(E1000_RTTBCNRM
, 0x14);
8001 wr32(E1000_RTTBCNRC
, bcnrc_val
);
8004 static void igb_check_vf_rate_limit(struct igb_adapter
*adapter
)
8006 int actual_link_speed
, i
;
8007 bool reset_rate
= false;
8009 /* VF TX rate limit was not set or not supported */
8010 if ((adapter
->vf_rate_link_speed
== 0) ||
8011 (adapter
->hw
.mac
.type
!= e1000_82576
))
8014 actual_link_speed
= igb_link_mbps(adapter
->link_speed
);
8015 if (actual_link_speed
!= adapter
->vf_rate_link_speed
) {
8017 adapter
->vf_rate_link_speed
= 0;
8018 dev_info(&adapter
->pdev
->dev
,
8019 "Link speed has been changed. VF Transmit rate is disabled\n");
8022 for (i
= 0; i
< adapter
->vfs_allocated_count
; i
++) {
8024 adapter
->vf_data
[i
].tx_rate
= 0;
8026 igb_set_vf_rate_limit(&adapter
->hw
, i
,
8027 adapter
->vf_data
[i
].tx_rate
,
8032 static int igb_ndo_set_vf_bw(struct net_device
*netdev
, int vf
,
8033 int min_tx_rate
, int max_tx_rate
)
8035 struct igb_adapter
*adapter
= netdev_priv(netdev
);
8036 struct e1000_hw
*hw
= &adapter
->hw
;
8037 int actual_link_speed
;
8039 if (hw
->mac
.type
!= e1000_82576
)
8045 actual_link_speed
= igb_link_mbps(adapter
->link_speed
);
8046 if ((vf
>= adapter
->vfs_allocated_count
) ||
8047 (!(rd32(E1000_STATUS
) & E1000_STATUS_LU
)) ||
8048 (max_tx_rate
< 0) ||
8049 (max_tx_rate
> actual_link_speed
))
8052 adapter
->vf_rate_link_speed
= actual_link_speed
;
8053 adapter
->vf_data
[vf
].tx_rate
= (u16
)max_tx_rate
;
8054 igb_set_vf_rate_limit(hw
, vf
, max_tx_rate
, actual_link_speed
);
8059 static int igb_ndo_set_vf_spoofchk(struct net_device
*netdev
, int vf
,
8062 struct igb_adapter
*adapter
= netdev_priv(netdev
);
8063 struct e1000_hw
*hw
= &adapter
->hw
;
8064 u32 reg_val
, reg_offset
;
8066 if (!adapter
->vfs_allocated_count
)
8069 if (vf
>= adapter
->vfs_allocated_count
)
8072 reg_offset
= (hw
->mac
.type
== e1000_82576
) ? E1000_DTXSWC
: E1000_TXSWC
;
8073 reg_val
= rd32(reg_offset
);
8075 reg_val
|= (BIT(vf
) |
8076 BIT(vf
+ E1000_DTXSWC_VLAN_SPOOF_SHIFT
));
8078 reg_val
&= ~(BIT(vf
) |
8079 BIT(vf
+ E1000_DTXSWC_VLAN_SPOOF_SHIFT
));
8080 wr32(reg_offset
, reg_val
);
8082 adapter
->vf_data
[vf
].spoofchk_enabled
= setting
;
8086 static int igb_ndo_get_vf_config(struct net_device
*netdev
,
8087 int vf
, struct ifla_vf_info
*ivi
)
8089 struct igb_adapter
*adapter
= netdev_priv(netdev
);
8090 if (vf
>= adapter
->vfs_allocated_count
)
8093 memcpy(&ivi
->mac
, adapter
->vf_data
[vf
].vf_mac_addresses
, ETH_ALEN
);
8094 ivi
->max_tx_rate
= adapter
->vf_data
[vf
].tx_rate
;
8095 ivi
->min_tx_rate
= 0;
8096 ivi
->vlan
= adapter
->vf_data
[vf
].pf_vlan
;
8097 ivi
->qos
= adapter
->vf_data
[vf
].pf_qos
;
8098 ivi
->spoofchk
= adapter
->vf_data
[vf
].spoofchk_enabled
;
8102 static void igb_vmm_control(struct igb_adapter
*adapter
)
8104 struct e1000_hw
*hw
= &adapter
->hw
;
8107 switch (hw
->mac
.type
) {
8113 /* replication is not supported for 82575 */
8116 /* notify HW that the MAC is adding vlan tags */
8117 reg
= rd32(E1000_DTXCTL
);
8118 reg
|= E1000_DTXCTL_VLAN_ADDED
;
8119 wr32(E1000_DTXCTL
, reg
);
8122 /* enable replication vlan tag stripping */
8123 reg
= rd32(E1000_RPLOLR
);
8124 reg
|= E1000_RPLOLR_STRVLAN
;
8125 wr32(E1000_RPLOLR
, reg
);
8128 /* none of the above registers are supported by i350 */
8132 if (adapter
->vfs_allocated_count
) {
8133 igb_vmdq_set_loopback_pf(hw
, true);
8134 igb_vmdq_set_replication_pf(hw
, true);
8135 igb_vmdq_set_anti_spoofing_pf(hw
, true,
8136 adapter
->vfs_allocated_count
);
8138 igb_vmdq_set_loopback_pf(hw
, false);
8139 igb_vmdq_set_replication_pf(hw
, false);
8143 static void igb_init_dmac(struct igb_adapter
*adapter
, u32 pba
)
8145 struct e1000_hw
*hw
= &adapter
->hw
;
8149 if (hw
->mac
.type
> e1000_82580
) {
8150 if (adapter
->flags
& IGB_FLAG_DMAC
) {
8153 /* force threshold to 0. */
8154 wr32(E1000_DMCTXTH
, 0);
8156 /* DMA Coalescing high water mark needs to be greater
8157 * than the Rx threshold. Set hwm to PBA - max frame
8158 * size in 16B units, capping it at PBA - 6KB.
8160 hwm
= 64 * (pba
- 6);
8161 reg
= rd32(E1000_FCRTC
);
8162 reg
&= ~E1000_FCRTC_RTH_COAL_MASK
;
8163 reg
|= ((hwm
<< E1000_FCRTC_RTH_COAL_SHIFT
)
8164 & E1000_FCRTC_RTH_COAL_MASK
);
8165 wr32(E1000_FCRTC
, reg
);
8167 /* Set the DMA Coalescing Rx threshold to PBA - 2 * max
8168 * frame size, capping it at PBA - 10KB.
8170 dmac_thr
= pba
- 10;
8171 reg
= rd32(E1000_DMACR
);
8172 reg
&= ~E1000_DMACR_DMACTHR_MASK
;
8173 reg
|= ((dmac_thr
<< E1000_DMACR_DMACTHR_SHIFT
)
8174 & E1000_DMACR_DMACTHR_MASK
);
8176 /* transition to L0x or L1 if available..*/
8177 reg
|= (E1000_DMACR_DMAC_EN
| E1000_DMACR_DMAC_LX_MASK
);
8179 /* watchdog timer= +-1000 usec in 32usec intervals */
8182 /* Disable BMC-to-OS Watchdog Enable */
8183 if (hw
->mac
.type
!= e1000_i354
)
8184 reg
&= ~E1000_DMACR_DC_BMC2OSW_EN
;
8186 wr32(E1000_DMACR
, reg
);
8188 /* no lower threshold to disable
8189 * coalescing(smart fifb)-UTRESH=0
8191 wr32(E1000_DMCRTRH
, 0);
8193 reg
= (IGB_DMCTLX_DCFLUSH_DIS
| 0x4);
8195 wr32(E1000_DMCTLX
, reg
);
8197 /* free space in tx packet buffer to wake from
8200 wr32(E1000_DMCTXTH
, (IGB_MIN_TXPBSIZE
-
8201 (IGB_TX_BUF_4096
+ adapter
->max_frame_size
)) >> 6);
8203 /* make low power state decision controlled
8206 reg
= rd32(E1000_PCIEMISC
);
8207 reg
&= ~E1000_PCIEMISC_LX_DECISION
;
8208 wr32(E1000_PCIEMISC
, reg
);
8209 } /* endif adapter->dmac is not disabled */
8210 } else if (hw
->mac
.type
== e1000_82580
) {
8211 u32 reg
= rd32(E1000_PCIEMISC
);
8213 wr32(E1000_PCIEMISC
, reg
& ~E1000_PCIEMISC_LX_DECISION
);
8214 wr32(E1000_DMACR
, 0);
8219 * igb_read_i2c_byte - Reads 8 bit word over I2C
8220 * @hw: pointer to hardware structure
8221 * @byte_offset: byte offset to read
8222 * @dev_addr: device address
8225 * Performs byte read operation over I2C interface at
8226 * a specified device address.
8228 s32
igb_read_i2c_byte(struct e1000_hw
*hw
, u8 byte_offset
,
8229 u8 dev_addr
, u8
*data
)
8231 struct igb_adapter
*adapter
= container_of(hw
, struct igb_adapter
, hw
);
8232 struct i2c_client
*this_client
= adapter
->i2c_client
;
8237 return E1000_ERR_I2C
;
8239 swfw_mask
= E1000_SWFW_PHY0_SM
;
8241 if (hw
->mac
.ops
.acquire_swfw_sync(hw
, swfw_mask
))
8242 return E1000_ERR_SWFW_SYNC
;
8244 status
= i2c_smbus_read_byte_data(this_client
, byte_offset
);
8245 hw
->mac
.ops
.release_swfw_sync(hw
, swfw_mask
);
8248 return E1000_ERR_I2C
;
8256 * igb_write_i2c_byte - Writes 8 bit word over I2C
8257 * @hw: pointer to hardware structure
8258 * @byte_offset: byte offset to write
8259 * @dev_addr: device address
8260 * @data: value to write
8262 * Performs byte write operation over I2C interface at
8263 * a specified device address.
8265 s32
igb_write_i2c_byte(struct e1000_hw
*hw
, u8 byte_offset
,
8266 u8 dev_addr
, u8 data
)
8268 struct igb_adapter
*adapter
= container_of(hw
, struct igb_adapter
, hw
);
8269 struct i2c_client
*this_client
= adapter
->i2c_client
;
8271 u16 swfw_mask
= E1000_SWFW_PHY0_SM
;
8274 return E1000_ERR_I2C
;
8276 if (hw
->mac
.ops
.acquire_swfw_sync(hw
, swfw_mask
))
8277 return E1000_ERR_SWFW_SYNC
;
8278 status
= i2c_smbus_write_byte_data(this_client
, byte_offset
, data
);
8279 hw
->mac
.ops
.release_swfw_sync(hw
, swfw_mask
);
8282 return E1000_ERR_I2C
;
8288 int igb_reinit_queues(struct igb_adapter
*adapter
)
8290 struct net_device
*netdev
= adapter
->netdev
;
8291 struct pci_dev
*pdev
= adapter
->pdev
;
8294 if (netif_running(netdev
))
8297 igb_reset_interrupt_capability(adapter
);
8299 if (igb_init_interrupt_scheme(adapter
, true)) {
8300 dev_err(&pdev
->dev
, "Unable to allocate memory for queues\n");
8304 if (netif_running(netdev
))
8305 err
= igb_open(netdev
);