1 /*******************************************************************************
3 Intel 10 Gigabit PCI Express Linux driver
4 Copyright(c) 1999 - 2012 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26 *******************************************************************************/
28 #include <linux/pci.h>
29 #include <linux/delay.h>
30 #include <linux/sched.h>
32 #include "ixgbe_common.h"
33 #include "ixgbe_phy.h"
35 static void ixgbe_i2c_start(struct ixgbe_hw
*hw
);
36 static void ixgbe_i2c_stop(struct ixgbe_hw
*hw
);
37 static s32
ixgbe_clock_in_i2c_byte(struct ixgbe_hw
*hw
, u8
*data
);
38 static s32
ixgbe_clock_out_i2c_byte(struct ixgbe_hw
*hw
, u8 data
);
39 static s32
ixgbe_get_i2c_ack(struct ixgbe_hw
*hw
);
40 static s32
ixgbe_clock_in_i2c_bit(struct ixgbe_hw
*hw
, bool *data
);
41 static s32
ixgbe_clock_out_i2c_bit(struct ixgbe_hw
*hw
, bool data
);
42 static void ixgbe_raise_i2c_clk(struct ixgbe_hw
*hw
, u32
*i2cctl
);
43 static void ixgbe_lower_i2c_clk(struct ixgbe_hw
*hw
, u32
*i2cctl
);
44 static s32
ixgbe_set_i2c_data(struct ixgbe_hw
*hw
, u32
*i2cctl
, bool data
);
45 static bool ixgbe_get_i2c_data(u32
*i2cctl
);
46 static void ixgbe_i2c_bus_clear(struct ixgbe_hw
*hw
);
47 static enum ixgbe_phy_type
ixgbe_get_phy_type_from_id(u32 phy_id
);
48 static s32
ixgbe_get_phy_id(struct ixgbe_hw
*hw
);
51 * ixgbe_identify_phy_generic - Get physical layer module
52 * @hw: pointer to hardware structure
54 * Determines the physical layer module found on the current adapter.
56 s32
ixgbe_identify_phy_generic(struct ixgbe_hw
*hw
)
58 s32 status
= IXGBE_ERR_PHY_ADDR_INVALID
;
62 if (hw
->phy
.type
== ixgbe_phy_unknown
) {
63 for (phy_addr
= 0; phy_addr
< IXGBE_MAX_PHY_ADDR
; phy_addr
++) {
64 hw
->phy
.mdio
.prtad
= phy_addr
;
65 if (mdio45_probe(&hw
->phy
.mdio
, phy_addr
) == 0) {
68 ixgbe_get_phy_type_from_id(hw
->phy
.id
);
70 if (hw
->phy
.type
== ixgbe_phy_unknown
) {
71 hw
->phy
.ops
.read_reg(hw
,
76 (MDIO_PMA_EXTABLE_10GBT
|
77 MDIO_PMA_EXTABLE_1000BT
))
89 /* clear value if nothing found */
91 hw
->phy
.mdio
.prtad
= 0;
100 * ixgbe_get_phy_id - Get the phy type
101 * @hw: pointer to hardware structure
104 static s32
ixgbe_get_phy_id(struct ixgbe_hw
*hw
)
110 status
= hw
->phy
.ops
.read_reg(hw
, MDIO_DEVID1
, MDIO_MMD_PMAPMD
,
114 hw
->phy
.id
= (u32
)(phy_id_high
<< 16);
115 status
= hw
->phy
.ops
.read_reg(hw
, MDIO_DEVID2
, MDIO_MMD_PMAPMD
,
117 hw
->phy
.id
|= (u32
)(phy_id_low
& IXGBE_PHY_REVISION_MASK
);
118 hw
->phy
.revision
= (u32
)(phy_id_low
& ~IXGBE_PHY_REVISION_MASK
);
124 * ixgbe_get_phy_type_from_id - Get the phy type
125 * @hw: pointer to hardware structure
128 static enum ixgbe_phy_type
ixgbe_get_phy_type_from_id(u32 phy_id
)
130 enum ixgbe_phy_type phy_type
;
134 phy_type
= ixgbe_phy_tn
;
137 phy_type
= ixgbe_phy_aq
;
140 phy_type
= ixgbe_phy_qt
;
143 phy_type
= ixgbe_phy_nl
;
146 phy_type
= ixgbe_phy_unknown
;
154 * ixgbe_reset_phy_generic - Performs a PHY reset
155 * @hw: pointer to hardware structure
157 s32
ixgbe_reset_phy_generic(struct ixgbe_hw
*hw
)
163 if (hw
->phy
.type
== ixgbe_phy_unknown
)
164 status
= ixgbe_identify_phy_generic(hw
);
166 if (status
!= 0 || hw
->phy
.type
== ixgbe_phy_none
)
169 /* Don't reset PHY if it's shut down due to overtemp. */
170 if (!hw
->phy
.reset_if_overtemp
&&
171 (IXGBE_ERR_OVERTEMP
== hw
->phy
.ops
.check_overtemp(hw
)))
175 * Perform soft PHY reset to the PHY_XS.
176 * This will cause a soft reset to the PHY
178 hw
->phy
.ops
.write_reg(hw
, MDIO_CTRL1
,
183 * Poll for reset bit to self-clear indicating reset is complete.
184 * Some PHYs could take up to 3 seconds to complete and need about
185 * 1.7 usec delay after the reset is complete.
187 for (i
= 0; i
< 30; i
++) {
189 hw
->phy
.ops
.read_reg(hw
, MDIO_CTRL1
,
190 MDIO_MMD_PHYXS
, &ctrl
);
191 if (!(ctrl
& MDIO_CTRL1_RESET
)) {
197 if (ctrl
& MDIO_CTRL1_RESET
) {
198 status
= IXGBE_ERR_RESET_FAILED
;
199 hw_dbg(hw
, "PHY reset polling failed to complete.\n");
207 * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
208 * @hw: pointer to hardware structure
209 * @reg_addr: 32 bit address of PHY register to read
210 * @phy_data: Pointer to read data from PHY register
212 s32
ixgbe_read_phy_reg_generic(struct ixgbe_hw
*hw
, u32 reg_addr
,
213 u32 device_type
, u16
*phy_data
)
221 if (IXGBE_READ_REG(hw
, IXGBE_STATUS
) & IXGBE_STATUS_LAN_ID_1
)
222 gssr
= IXGBE_GSSR_PHY1_SM
;
224 gssr
= IXGBE_GSSR_PHY0_SM
;
226 if (hw
->mac
.ops
.acquire_swfw_sync(hw
, gssr
) != 0)
227 status
= IXGBE_ERR_SWFW_SYNC
;
230 /* Setup and write the address cycle command */
231 command
= ((reg_addr
<< IXGBE_MSCA_NP_ADDR_SHIFT
) |
232 (device_type
<< IXGBE_MSCA_DEV_TYPE_SHIFT
) |
233 (hw
->phy
.mdio
.prtad
<< IXGBE_MSCA_PHY_ADDR_SHIFT
) |
234 (IXGBE_MSCA_ADDR_CYCLE
| IXGBE_MSCA_MDI_COMMAND
));
236 IXGBE_WRITE_REG(hw
, IXGBE_MSCA
, command
);
239 * Check every 10 usec to see if the address cycle completed.
240 * The MDI Command bit will clear when the operation is
243 for (i
= 0; i
< IXGBE_MDIO_COMMAND_TIMEOUT
; i
++) {
246 command
= IXGBE_READ_REG(hw
, IXGBE_MSCA
);
248 if ((command
& IXGBE_MSCA_MDI_COMMAND
) == 0)
252 if ((command
& IXGBE_MSCA_MDI_COMMAND
) != 0) {
253 hw_dbg(hw
, "PHY address command did not complete.\n");
254 status
= IXGBE_ERR_PHY
;
259 * Address cycle complete, setup and write the read
262 command
= ((reg_addr
<< IXGBE_MSCA_NP_ADDR_SHIFT
) |
263 (device_type
<< IXGBE_MSCA_DEV_TYPE_SHIFT
) |
264 (hw
->phy
.mdio
.prtad
<<
265 IXGBE_MSCA_PHY_ADDR_SHIFT
) |
266 (IXGBE_MSCA_READ
| IXGBE_MSCA_MDI_COMMAND
));
268 IXGBE_WRITE_REG(hw
, IXGBE_MSCA
, command
);
271 * Check every 10 usec to see if the address cycle
272 * completed. The MDI Command bit will clear when the
273 * operation is complete
275 for (i
= 0; i
< IXGBE_MDIO_COMMAND_TIMEOUT
; i
++) {
278 command
= IXGBE_READ_REG(hw
, IXGBE_MSCA
);
280 if ((command
& IXGBE_MSCA_MDI_COMMAND
) == 0)
284 if ((command
& IXGBE_MSCA_MDI_COMMAND
) != 0) {
285 hw_dbg(hw
, "PHY read command didn't complete\n");
286 status
= IXGBE_ERR_PHY
;
289 * Read operation is complete. Get the data
292 data
= IXGBE_READ_REG(hw
, IXGBE_MSRWD
);
293 data
>>= IXGBE_MSRWD_READ_DATA_SHIFT
;
294 *phy_data
= (u16
)(data
);
298 hw
->mac
.ops
.release_swfw_sync(hw
, gssr
);
305 * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
306 * @hw: pointer to hardware structure
307 * @reg_addr: 32 bit PHY register to write
308 * @device_type: 5 bit device type
309 * @phy_data: Data to write to the PHY register
311 s32
ixgbe_write_phy_reg_generic(struct ixgbe_hw
*hw
, u32 reg_addr
,
312 u32 device_type
, u16 phy_data
)
319 if (IXGBE_READ_REG(hw
, IXGBE_STATUS
) & IXGBE_STATUS_LAN_ID_1
)
320 gssr
= IXGBE_GSSR_PHY1_SM
;
322 gssr
= IXGBE_GSSR_PHY0_SM
;
324 if (hw
->mac
.ops
.acquire_swfw_sync(hw
, gssr
) != 0)
325 status
= IXGBE_ERR_SWFW_SYNC
;
328 /* Put the data in the MDI single read and write data register*/
329 IXGBE_WRITE_REG(hw
, IXGBE_MSRWD
, (u32
)phy_data
);
331 /* Setup and write the address cycle command */
332 command
= ((reg_addr
<< IXGBE_MSCA_NP_ADDR_SHIFT
) |
333 (device_type
<< IXGBE_MSCA_DEV_TYPE_SHIFT
) |
334 (hw
->phy
.mdio
.prtad
<< IXGBE_MSCA_PHY_ADDR_SHIFT
) |
335 (IXGBE_MSCA_ADDR_CYCLE
| IXGBE_MSCA_MDI_COMMAND
));
337 IXGBE_WRITE_REG(hw
, IXGBE_MSCA
, command
);
340 * Check every 10 usec to see if the address cycle completed.
341 * The MDI Command bit will clear when the operation is
344 for (i
= 0; i
< IXGBE_MDIO_COMMAND_TIMEOUT
; i
++) {
347 command
= IXGBE_READ_REG(hw
, IXGBE_MSCA
);
349 if ((command
& IXGBE_MSCA_MDI_COMMAND
) == 0)
353 if ((command
& IXGBE_MSCA_MDI_COMMAND
) != 0) {
354 hw_dbg(hw
, "PHY address cmd didn't complete\n");
355 status
= IXGBE_ERR_PHY
;
360 * Address cycle complete, setup and write the write
363 command
= ((reg_addr
<< IXGBE_MSCA_NP_ADDR_SHIFT
) |
364 (device_type
<< IXGBE_MSCA_DEV_TYPE_SHIFT
) |
365 (hw
->phy
.mdio
.prtad
<<
366 IXGBE_MSCA_PHY_ADDR_SHIFT
) |
367 (IXGBE_MSCA_WRITE
| IXGBE_MSCA_MDI_COMMAND
));
369 IXGBE_WRITE_REG(hw
, IXGBE_MSCA
, command
);
372 * Check every 10 usec to see if the address cycle
373 * completed. The MDI Command bit will clear when the
374 * operation is complete
376 for (i
= 0; i
< IXGBE_MDIO_COMMAND_TIMEOUT
; i
++) {
379 command
= IXGBE_READ_REG(hw
, IXGBE_MSCA
);
381 if ((command
& IXGBE_MSCA_MDI_COMMAND
) == 0)
385 if ((command
& IXGBE_MSCA_MDI_COMMAND
) != 0) {
386 hw_dbg(hw
, "PHY address cmd didn't complete\n");
387 status
= IXGBE_ERR_PHY
;
391 hw
->mac
.ops
.release_swfw_sync(hw
, gssr
);
398 * ixgbe_setup_phy_link_generic - Set and restart autoneg
399 * @hw: pointer to hardware structure
401 * Restart autonegotiation and PHY and waits for completion.
403 s32
ixgbe_setup_phy_link_generic(struct ixgbe_hw
*hw
)
407 u32 max_time_out
= 10;
408 u16 autoneg_reg
= IXGBE_MII_AUTONEG_REG
;
409 bool autoneg
= false;
410 ixgbe_link_speed speed
;
412 ixgbe_get_copper_link_capabilities_generic(hw
, &speed
, &autoneg
);
414 if (speed
& IXGBE_LINK_SPEED_10GB_FULL
) {
415 /* Set or unset auto-negotiation 10G advertisement */
416 hw
->phy
.ops
.read_reg(hw
, MDIO_AN_10GBT_CTRL
,
420 autoneg_reg
&= ~MDIO_AN_10GBT_CTRL_ADV10G
;
421 if (hw
->phy
.autoneg_advertised
& IXGBE_LINK_SPEED_10GB_FULL
)
422 autoneg_reg
|= MDIO_AN_10GBT_CTRL_ADV10G
;
424 hw
->phy
.ops
.write_reg(hw
, MDIO_AN_10GBT_CTRL
,
429 if (speed
& IXGBE_LINK_SPEED_1GB_FULL
) {
430 /* Set or unset auto-negotiation 1G advertisement */
431 hw
->phy
.ops
.read_reg(hw
,
432 IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG
,
436 autoneg_reg
&= ~IXGBE_MII_1GBASE_T_ADVERTISE
;
437 if (hw
->phy
.autoneg_advertised
& IXGBE_LINK_SPEED_1GB_FULL
)
438 autoneg_reg
|= IXGBE_MII_1GBASE_T_ADVERTISE
;
440 hw
->phy
.ops
.write_reg(hw
,
441 IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG
,
446 if (speed
& IXGBE_LINK_SPEED_100_FULL
) {
447 /* Set or unset auto-negotiation 100M advertisement */
448 hw
->phy
.ops
.read_reg(hw
, MDIO_AN_ADVERTISE
,
452 autoneg_reg
&= ~(ADVERTISE_100FULL
|
454 if (hw
->phy
.autoneg_advertised
& IXGBE_LINK_SPEED_100_FULL
)
455 autoneg_reg
|= ADVERTISE_100FULL
;
457 hw
->phy
.ops
.write_reg(hw
, MDIO_AN_ADVERTISE
,
462 /* Restart PHY autonegotiation and wait for completion */
463 hw
->phy
.ops
.read_reg(hw
, MDIO_CTRL1
,
464 MDIO_MMD_AN
, &autoneg_reg
);
466 autoneg_reg
|= MDIO_AN_CTRL1_RESTART
;
468 hw
->phy
.ops
.write_reg(hw
, MDIO_CTRL1
,
469 MDIO_MMD_AN
, autoneg_reg
);
471 /* Wait for autonegotiation to finish */
472 for (time_out
= 0; time_out
< max_time_out
; time_out
++) {
474 /* Restart PHY autonegotiation and wait for completion */
475 status
= hw
->phy
.ops
.read_reg(hw
, MDIO_STAT1
,
479 autoneg_reg
&= MDIO_AN_STAT1_COMPLETE
;
480 if (autoneg_reg
== MDIO_AN_STAT1_COMPLETE
) {
485 if (time_out
== max_time_out
) {
486 status
= IXGBE_ERR_LINK_SETUP
;
487 hw_dbg(hw
, "ixgbe_setup_phy_link_generic: time out");
494 * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities
495 * @hw: pointer to hardware structure
496 * @speed: new link speed
497 * @autoneg: true if autonegotiation enabled
499 s32
ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw
*hw
,
500 ixgbe_link_speed speed
,
502 bool autoneg_wait_to_complete
)
506 * Clear autoneg_advertised and set new values based on input link
509 hw
->phy
.autoneg_advertised
= 0;
511 if (speed
& IXGBE_LINK_SPEED_10GB_FULL
)
512 hw
->phy
.autoneg_advertised
|= IXGBE_LINK_SPEED_10GB_FULL
;
514 if (speed
& IXGBE_LINK_SPEED_1GB_FULL
)
515 hw
->phy
.autoneg_advertised
|= IXGBE_LINK_SPEED_1GB_FULL
;
517 if (speed
& IXGBE_LINK_SPEED_100_FULL
)
518 hw
->phy
.autoneg_advertised
|= IXGBE_LINK_SPEED_100_FULL
;
520 /* Setup link based on the new speed settings */
521 hw
->phy
.ops
.setup_link(hw
);
527 * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities
528 * @hw: pointer to hardware structure
529 * @speed: pointer to link speed
530 * @autoneg: boolean auto-negotiation value
532 * Determines the link capabilities by reading the AUTOC register.
534 s32
ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw
*hw
,
535 ixgbe_link_speed
*speed
,
538 s32 status
= IXGBE_ERR_LINK_SETUP
;
544 status
= hw
->phy
.ops
.read_reg(hw
, MDIO_SPEED
, MDIO_MMD_PMAPMD
,
548 if (speed_ability
& MDIO_SPEED_10G
)
549 *speed
|= IXGBE_LINK_SPEED_10GB_FULL
;
550 if (speed_ability
& MDIO_PMA_SPEED_1000
)
551 *speed
|= IXGBE_LINK_SPEED_1GB_FULL
;
552 if (speed_ability
& MDIO_PMA_SPEED_100
)
553 *speed
|= IXGBE_LINK_SPEED_100_FULL
;
560 * ixgbe_check_phy_link_tnx - Determine link and speed status
561 * @hw: pointer to hardware structure
563 * Reads the VS1 register to determine if link is up and the current speed for
566 s32
ixgbe_check_phy_link_tnx(struct ixgbe_hw
*hw
, ixgbe_link_speed
*speed
,
571 u32 max_time_out
= 10;
576 /* Initialize speed and link to default case */
578 *speed
= IXGBE_LINK_SPEED_10GB_FULL
;
581 * Check current speed and link status of the PHY register.
582 * This is a vendor specific register and may have to
583 * be changed for other copper PHYs.
585 for (time_out
= 0; time_out
< max_time_out
; time_out
++) {
587 status
= hw
->phy
.ops
.read_reg(hw
,
591 phy_link
= phy_data
&
592 IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS
;
593 phy_speed
= phy_data
&
594 IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS
;
595 if (phy_link
== IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS
) {
598 IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS
)
599 *speed
= IXGBE_LINK_SPEED_1GB_FULL
;
608 * ixgbe_setup_phy_link_tnx - Set and restart autoneg
609 * @hw: pointer to hardware structure
611 * Restart autonegotiation and PHY and waits for completion.
613 s32
ixgbe_setup_phy_link_tnx(struct ixgbe_hw
*hw
)
617 u32 max_time_out
= 10;
618 u16 autoneg_reg
= IXGBE_MII_AUTONEG_REG
;
619 bool autoneg
= false;
620 ixgbe_link_speed speed
;
622 ixgbe_get_copper_link_capabilities_generic(hw
, &speed
, &autoneg
);
624 if (speed
& IXGBE_LINK_SPEED_10GB_FULL
) {
625 /* Set or unset auto-negotiation 10G advertisement */
626 hw
->phy
.ops
.read_reg(hw
, MDIO_AN_10GBT_CTRL
,
630 autoneg_reg
&= ~MDIO_AN_10GBT_CTRL_ADV10G
;
631 if (hw
->phy
.autoneg_advertised
& IXGBE_LINK_SPEED_10GB_FULL
)
632 autoneg_reg
|= MDIO_AN_10GBT_CTRL_ADV10G
;
634 hw
->phy
.ops
.write_reg(hw
, MDIO_AN_10GBT_CTRL
,
639 if (speed
& IXGBE_LINK_SPEED_1GB_FULL
) {
640 /* Set or unset auto-negotiation 1G advertisement */
641 hw
->phy
.ops
.read_reg(hw
, IXGBE_MII_AUTONEG_XNP_TX_REG
,
645 autoneg_reg
&= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX
;
646 if (hw
->phy
.autoneg_advertised
& IXGBE_LINK_SPEED_1GB_FULL
)
647 autoneg_reg
|= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX
;
649 hw
->phy
.ops
.write_reg(hw
, IXGBE_MII_AUTONEG_XNP_TX_REG
,
654 if (speed
& IXGBE_LINK_SPEED_100_FULL
) {
655 /* Set or unset auto-negotiation 100M advertisement */
656 hw
->phy
.ops
.read_reg(hw
, MDIO_AN_ADVERTISE
,
660 autoneg_reg
&= ~(ADVERTISE_100FULL
|
662 if (hw
->phy
.autoneg_advertised
& IXGBE_LINK_SPEED_100_FULL
)
663 autoneg_reg
|= ADVERTISE_100FULL
;
665 hw
->phy
.ops
.write_reg(hw
, MDIO_AN_ADVERTISE
,
670 /* Restart PHY autonegotiation and wait for completion */
671 hw
->phy
.ops
.read_reg(hw
, MDIO_CTRL1
,
672 MDIO_MMD_AN
, &autoneg_reg
);
674 autoneg_reg
|= MDIO_AN_CTRL1_RESTART
;
676 hw
->phy
.ops
.write_reg(hw
, MDIO_CTRL1
,
677 MDIO_MMD_AN
, autoneg_reg
);
679 /* Wait for autonegotiation to finish */
680 for (time_out
= 0; time_out
< max_time_out
; time_out
++) {
682 /* Restart PHY autonegotiation and wait for completion */
683 status
= hw
->phy
.ops
.read_reg(hw
, MDIO_STAT1
,
687 autoneg_reg
&= MDIO_AN_STAT1_COMPLETE
;
688 if (autoneg_reg
== MDIO_AN_STAT1_COMPLETE
)
692 if (time_out
== max_time_out
) {
693 status
= IXGBE_ERR_LINK_SETUP
;
694 hw_dbg(hw
, "ixgbe_setup_phy_link_tnx: time out");
701 * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version
702 * @hw: pointer to hardware structure
703 * @firmware_version: pointer to the PHY Firmware Version
705 s32
ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw
*hw
,
706 u16
*firmware_version
)
710 status
= hw
->phy
.ops
.read_reg(hw
, TNX_FW_REV
,
718 * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version
719 * @hw: pointer to hardware structure
720 * @firmware_version: pointer to the PHY Firmware Version
722 s32
ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw
*hw
,
723 u16
*firmware_version
)
727 status
= hw
->phy
.ops
.read_reg(hw
, AQ_FW_REV
,
735 * ixgbe_reset_phy_nl - Performs a PHY reset
736 * @hw: pointer to hardware structure
738 s32
ixgbe_reset_phy_nl(struct ixgbe_hw
*hw
)
740 u16 phy_offset
, control
, eword
, edata
, block_crc
;
741 bool end_data
= false;
742 u16 list_offset
, data_offset
;
747 hw
->phy
.ops
.read_reg(hw
, MDIO_CTRL1
, MDIO_MMD_PHYXS
, &phy_data
);
749 /* reset the PHY and poll for completion */
750 hw
->phy
.ops
.write_reg(hw
, MDIO_CTRL1
, MDIO_MMD_PHYXS
,
751 (phy_data
| MDIO_CTRL1_RESET
));
753 for (i
= 0; i
< 100; i
++) {
754 hw
->phy
.ops
.read_reg(hw
, MDIO_CTRL1
, MDIO_MMD_PHYXS
,
756 if ((phy_data
& MDIO_CTRL1_RESET
) == 0)
758 usleep_range(10000, 20000);
761 if ((phy_data
& MDIO_CTRL1_RESET
) != 0) {
762 hw_dbg(hw
, "PHY reset did not complete.\n");
763 ret_val
= IXGBE_ERR_PHY
;
767 /* Get init offsets */
768 ret_val
= ixgbe_get_sfp_init_sequence_offsets(hw
, &list_offset
,
773 ret_val
= hw
->eeprom
.ops
.read(hw
, data_offset
, &block_crc
);
777 * Read control word from PHY init contents offset
779 ret_val
= hw
->eeprom
.ops
.read(hw
, data_offset
, &eword
);
780 control
= (eword
& IXGBE_CONTROL_MASK_NL
) >>
781 IXGBE_CONTROL_SHIFT_NL
;
782 edata
= eword
& IXGBE_DATA_MASK_NL
;
786 hw_dbg(hw
, "DELAY: %d MS\n", edata
);
787 usleep_range(edata
* 1000, edata
* 2000);
790 hw_dbg(hw
, "DATA:\n");
792 hw
->eeprom
.ops
.read(hw
, data_offset
++,
794 for (i
= 0; i
< edata
; i
++) {
795 hw
->eeprom
.ops
.read(hw
, data_offset
, &eword
);
796 hw
->phy
.ops
.write_reg(hw
, phy_offset
,
797 MDIO_MMD_PMAPMD
, eword
);
798 hw_dbg(hw
, "Wrote %4.4x to %4.4x\n", eword
,
804 case IXGBE_CONTROL_NL
:
806 hw_dbg(hw
, "CONTROL:\n");
807 if (edata
== IXGBE_CONTROL_EOL_NL
) {
810 } else if (edata
== IXGBE_CONTROL_SOL_NL
) {
813 hw_dbg(hw
, "Bad control value\n");
814 ret_val
= IXGBE_ERR_PHY
;
819 hw_dbg(hw
, "Bad control type\n");
820 ret_val
= IXGBE_ERR_PHY
;
830 * ixgbe_identify_sfp_module_generic - Identifies SFP modules
831 * @hw: pointer to hardware structure
833 * Searches for and identifies the SFP module and assigns appropriate PHY type.
835 s32
ixgbe_identify_sfp_module_generic(struct ixgbe_hw
*hw
)
837 struct ixgbe_adapter
*adapter
= hw
->back
;
838 s32 status
= IXGBE_ERR_PHY_ADDR_INVALID
;
840 enum ixgbe_sfp_type stored_sfp_type
= hw
->phy
.sfp_type
;
842 u8 comp_codes_1g
= 0;
843 u8 comp_codes_10g
= 0;
844 u8 oui_bytes
[3] = {0, 0, 0};
849 if (hw
->mac
.ops
.get_media_type(hw
) != ixgbe_media_type_fiber
) {
850 hw
->phy
.sfp_type
= ixgbe_sfp_type_not_present
;
851 status
= IXGBE_ERR_SFP_NOT_PRESENT
;
855 status
= hw
->phy
.ops
.read_i2c_eeprom(hw
,
856 IXGBE_SFF_IDENTIFIER
,
859 if (status
== IXGBE_ERR_SWFW_SYNC
||
860 status
== IXGBE_ERR_I2C
||
861 status
== IXGBE_ERR_SFP_NOT_PRESENT
)
862 goto err_read_i2c_eeprom
;
864 /* LAN ID is needed for sfp_type determination */
865 hw
->mac
.ops
.set_lan_id(hw
);
867 if (identifier
!= IXGBE_SFF_IDENTIFIER_SFP
) {
868 hw
->phy
.type
= ixgbe_phy_sfp_unsupported
;
869 status
= IXGBE_ERR_SFP_NOT_SUPPORTED
;
871 status
= hw
->phy
.ops
.read_i2c_eeprom(hw
,
872 IXGBE_SFF_1GBE_COMP_CODES
,
875 if (status
== IXGBE_ERR_SWFW_SYNC
||
876 status
== IXGBE_ERR_I2C
||
877 status
== IXGBE_ERR_SFP_NOT_PRESENT
)
878 goto err_read_i2c_eeprom
;
880 status
= hw
->phy
.ops
.read_i2c_eeprom(hw
,
881 IXGBE_SFF_10GBE_COMP_CODES
,
884 if (status
== IXGBE_ERR_SWFW_SYNC
||
885 status
== IXGBE_ERR_I2C
||
886 status
== IXGBE_ERR_SFP_NOT_PRESENT
)
887 goto err_read_i2c_eeprom
;
888 status
= hw
->phy
.ops
.read_i2c_eeprom(hw
,
889 IXGBE_SFF_CABLE_TECHNOLOGY
,
892 if (status
== IXGBE_ERR_SWFW_SYNC
||
893 status
== IXGBE_ERR_I2C
||
894 status
== IXGBE_ERR_SFP_NOT_PRESENT
)
895 goto err_read_i2c_eeprom
;
902 * 3 SFP_DA_CORE0 - 82599-specific
903 * 4 SFP_DA_CORE1 - 82599-specific
904 * 5 SFP_SR/LR_CORE0 - 82599-specific
905 * 6 SFP_SR/LR_CORE1 - 82599-specific
906 * 7 SFP_act_lmt_DA_CORE0 - 82599-specific
907 * 8 SFP_act_lmt_DA_CORE1 - 82599-specific
908 * 9 SFP_1g_cu_CORE0 - 82599-specific
909 * 10 SFP_1g_cu_CORE1 - 82599-specific
910 * 11 SFP_1g_sx_CORE0 - 82599-specific
911 * 12 SFP_1g_sx_CORE1 - 82599-specific
913 if (hw
->mac
.type
== ixgbe_mac_82598EB
) {
914 if (cable_tech
& IXGBE_SFF_DA_PASSIVE_CABLE
)
915 hw
->phy
.sfp_type
= ixgbe_sfp_type_da_cu
;
916 else if (comp_codes_10g
& IXGBE_SFF_10GBASESR_CAPABLE
)
917 hw
->phy
.sfp_type
= ixgbe_sfp_type_sr
;
918 else if (comp_codes_10g
& IXGBE_SFF_10GBASELR_CAPABLE
)
919 hw
->phy
.sfp_type
= ixgbe_sfp_type_lr
;
921 hw
->phy
.sfp_type
= ixgbe_sfp_type_unknown
;
922 } else if (hw
->mac
.type
== ixgbe_mac_82599EB
) {
923 if (cable_tech
& IXGBE_SFF_DA_PASSIVE_CABLE
) {
924 if (hw
->bus
.lan_id
== 0)
926 ixgbe_sfp_type_da_cu_core0
;
929 ixgbe_sfp_type_da_cu_core1
;
930 } else if (cable_tech
& IXGBE_SFF_DA_ACTIVE_CABLE
) {
931 hw
->phy
.ops
.read_i2c_eeprom(
932 hw
, IXGBE_SFF_CABLE_SPEC_COMP
,
935 IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING
) {
936 if (hw
->bus
.lan_id
== 0)
938 ixgbe_sfp_type_da_act_lmt_core0
;
941 ixgbe_sfp_type_da_act_lmt_core1
;
944 ixgbe_sfp_type_unknown
;
946 } else if (comp_codes_10g
&
947 (IXGBE_SFF_10GBASESR_CAPABLE
|
948 IXGBE_SFF_10GBASELR_CAPABLE
)) {
949 if (hw
->bus
.lan_id
== 0)
951 ixgbe_sfp_type_srlr_core0
;
954 ixgbe_sfp_type_srlr_core1
;
955 } else if (comp_codes_1g
& IXGBE_SFF_1GBASET_CAPABLE
) {
956 if (hw
->bus
.lan_id
== 0)
958 ixgbe_sfp_type_1g_cu_core0
;
961 ixgbe_sfp_type_1g_cu_core1
;
962 } else if (comp_codes_1g
& IXGBE_SFF_1GBASESX_CAPABLE
) {
963 if (hw
->bus
.lan_id
== 0)
965 ixgbe_sfp_type_1g_sx_core0
;
968 ixgbe_sfp_type_1g_sx_core1
;
970 hw
->phy
.sfp_type
= ixgbe_sfp_type_unknown
;
974 if (hw
->phy
.sfp_type
!= stored_sfp_type
)
975 hw
->phy
.sfp_setup_needed
= true;
977 /* Determine if the SFP+ PHY is dual speed or not. */
978 hw
->phy
.multispeed_fiber
= false;
979 if (((comp_codes_1g
& IXGBE_SFF_1GBASESX_CAPABLE
) &&
980 (comp_codes_10g
& IXGBE_SFF_10GBASESR_CAPABLE
)) ||
981 ((comp_codes_1g
& IXGBE_SFF_1GBASELX_CAPABLE
) &&
982 (comp_codes_10g
& IXGBE_SFF_10GBASELR_CAPABLE
)))
983 hw
->phy
.multispeed_fiber
= true;
985 /* Determine PHY vendor */
986 if (hw
->phy
.type
!= ixgbe_phy_nl
) {
987 hw
->phy
.id
= identifier
;
988 status
= hw
->phy
.ops
.read_i2c_eeprom(hw
,
989 IXGBE_SFF_VENDOR_OUI_BYTE0
,
992 if (status
== IXGBE_ERR_SWFW_SYNC
||
993 status
== IXGBE_ERR_I2C
||
994 status
== IXGBE_ERR_SFP_NOT_PRESENT
)
995 goto err_read_i2c_eeprom
;
997 status
= hw
->phy
.ops
.read_i2c_eeprom(hw
,
998 IXGBE_SFF_VENDOR_OUI_BYTE1
,
1001 if (status
== IXGBE_ERR_SWFW_SYNC
||
1002 status
== IXGBE_ERR_I2C
||
1003 status
== IXGBE_ERR_SFP_NOT_PRESENT
)
1004 goto err_read_i2c_eeprom
;
1006 status
= hw
->phy
.ops
.read_i2c_eeprom(hw
,
1007 IXGBE_SFF_VENDOR_OUI_BYTE2
,
1010 if (status
== IXGBE_ERR_SWFW_SYNC
||
1011 status
== IXGBE_ERR_I2C
||
1012 status
== IXGBE_ERR_SFP_NOT_PRESENT
)
1013 goto err_read_i2c_eeprom
;
1016 ((oui_bytes
[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT
) |
1017 (oui_bytes
[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT
) |
1018 (oui_bytes
[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT
));
1020 switch (vendor_oui
) {
1021 case IXGBE_SFF_VENDOR_OUI_TYCO
:
1022 if (cable_tech
& IXGBE_SFF_DA_PASSIVE_CABLE
)
1024 ixgbe_phy_sfp_passive_tyco
;
1026 case IXGBE_SFF_VENDOR_OUI_FTL
:
1027 if (cable_tech
& IXGBE_SFF_DA_ACTIVE_CABLE
)
1028 hw
->phy
.type
= ixgbe_phy_sfp_ftl_active
;
1030 hw
->phy
.type
= ixgbe_phy_sfp_ftl
;
1032 case IXGBE_SFF_VENDOR_OUI_AVAGO
:
1033 hw
->phy
.type
= ixgbe_phy_sfp_avago
;
1035 case IXGBE_SFF_VENDOR_OUI_INTEL
:
1036 hw
->phy
.type
= ixgbe_phy_sfp_intel
;
1039 if (cable_tech
& IXGBE_SFF_DA_PASSIVE_CABLE
)
1041 ixgbe_phy_sfp_passive_unknown
;
1042 else if (cable_tech
& IXGBE_SFF_DA_ACTIVE_CABLE
)
1044 ixgbe_phy_sfp_active_unknown
;
1046 hw
->phy
.type
= ixgbe_phy_sfp_unknown
;
1051 /* Allow any DA cable vendor */
1052 if (cable_tech
& (IXGBE_SFF_DA_PASSIVE_CABLE
|
1053 IXGBE_SFF_DA_ACTIVE_CABLE
)) {
1058 /* Verify supported 1G SFP modules */
1059 if (comp_codes_10g
== 0 &&
1060 !(hw
->phy
.sfp_type
== ixgbe_sfp_type_1g_cu_core1
||
1061 hw
->phy
.sfp_type
== ixgbe_sfp_type_1g_cu_core0
||
1062 hw
->phy
.sfp_type
== ixgbe_sfp_type_1g_sx_core0
||
1063 hw
->phy
.sfp_type
== ixgbe_sfp_type_1g_sx_core1
)) {
1064 hw
->phy
.type
= ixgbe_phy_sfp_unsupported
;
1065 status
= IXGBE_ERR_SFP_NOT_SUPPORTED
;
1069 /* Anything else 82598-based is supported */
1070 if (hw
->mac
.type
== ixgbe_mac_82598EB
) {
1075 hw
->mac
.ops
.get_device_caps(hw
, &enforce_sfp
);
1076 if (!(enforce_sfp
& IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP
) &&
1077 !((hw
->phy
.sfp_type
== ixgbe_sfp_type_1g_cu_core0
) ||
1078 (hw
->phy
.sfp_type
== ixgbe_sfp_type_1g_cu_core1
) ||
1079 (hw
->phy
.sfp_type
== ixgbe_sfp_type_1g_sx_core0
) ||
1080 (hw
->phy
.sfp_type
== ixgbe_sfp_type_1g_sx_core1
))) {
1081 /* Make sure we're a supported PHY type */
1082 if (hw
->phy
.type
== ixgbe_phy_sfp_intel
) {
1085 if (hw
->allow_unsupported_sfp
) {
1086 e_warn(drv
, "WARNING: Intel (R) Network Connections are quality tested using Intel (R) Ethernet Optics. Using untested modules is not supported and may cause unstable operation or damage to the module or the adapter. Intel Corporation is not responsible for any harm caused by using untested modules.");
1090 "SFP+ module not supported\n");
1092 ixgbe_phy_sfp_unsupported
;
1093 status
= IXGBE_ERR_SFP_NOT_SUPPORTED
;
1104 err_read_i2c_eeprom
:
1105 hw
->phy
.sfp_type
= ixgbe_sfp_type_not_present
;
1106 if (hw
->phy
.type
!= ixgbe_phy_nl
) {
1108 hw
->phy
.type
= ixgbe_phy_unknown
;
1110 return IXGBE_ERR_SFP_NOT_PRESENT
;
1114 * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence
1115 * @hw: pointer to hardware structure
1116 * @list_offset: offset to the SFP ID list
1117 * @data_offset: offset to the SFP data block
1119 * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if
1120 * so it returns the offsets to the phy init sequence block.
1122 s32
ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw
*hw
,
1127 u16 sfp_type
= hw
->phy
.sfp_type
;
1129 if (hw
->phy
.sfp_type
== ixgbe_sfp_type_unknown
)
1130 return IXGBE_ERR_SFP_NOT_SUPPORTED
;
1132 if (hw
->phy
.sfp_type
== ixgbe_sfp_type_not_present
)
1133 return IXGBE_ERR_SFP_NOT_PRESENT
;
1135 if ((hw
->device_id
== IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM
) &&
1136 (hw
->phy
.sfp_type
== ixgbe_sfp_type_da_cu
))
1137 return IXGBE_ERR_SFP_NOT_SUPPORTED
;
1140 * Limiting active cables and 1G Phys must be initialized as
1143 if (sfp_type
== ixgbe_sfp_type_da_act_lmt_core0
||
1144 sfp_type
== ixgbe_sfp_type_1g_cu_core0
||
1145 sfp_type
== ixgbe_sfp_type_1g_sx_core0
)
1146 sfp_type
= ixgbe_sfp_type_srlr_core0
;
1147 else if (sfp_type
== ixgbe_sfp_type_da_act_lmt_core1
||
1148 sfp_type
== ixgbe_sfp_type_1g_cu_core1
||
1149 sfp_type
== ixgbe_sfp_type_1g_sx_core1
)
1150 sfp_type
= ixgbe_sfp_type_srlr_core1
;
1152 /* Read offset to PHY init contents */
1153 hw
->eeprom
.ops
.read(hw
, IXGBE_PHY_INIT_OFFSET_NL
, list_offset
);
1155 if ((!*list_offset
) || (*list_offset
== 0xFFFF))
1156 return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT
;
1158 /* Shift offset to first ID word */
1162 * Find the matching SFP ID in the EEPROM
1163 * and program the init sequence
1165 hw
->eeprom
.ops
.read(hw
, *list_offset
, &sfp_id
);
1167 while (sfp_id
!= IXGBE_PHY_INIT_END_NL
) {
1168 if (sfp_id
== sfp_type
) {
1170 hw
->eeprom
.ops
.read(hw
, *list_offset
, data_offset
);
1171 if ((!*data_offset
) || (*data_offset
== 0xFFFF)) {
1172 hw_dbg(hw
, "SFP+ module not supported\n");
1173 return IXGBE_ERR_SFP_NOT_SUPPORTED
;
1178 (*list_offset
) += 2;
1179 if (hw
->eeprom
.ops
.read(hw
, *list_offset
, &sfp_id
))
1180 return IXGBE_ERR_PHY
;
1184 if (sfp_id
== IXGBE_PHY_INIT_END_NL
) {
1185 hw_dbg(hw
, "No matching SFP+ module found\n");
1186 return IXGBE_ERR_SFP_NOT_SUPPORTED
;
1193 * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface
1194 * @hw: pointer to hardware structure
1195 * @byte_offset: EEPROM byte offset to read
1196 * @eeprom_data: value read
1198 * Performs byte read operation to SFP module's EEPROM over I2C interface.
1200 s32
ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw
*hw
, u8 byte_offset
,
1203 return hw
->phy
.ops
.read_i2c_byte(hw
, byte_offset
,
1204 IXGBE_I2C_EEPROM_DEV_ADDR
,
1209 * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface
1210 * @hw: pointer to hardware structure
1211 * @byte_offset: EEPROM byte offset to write
1212 * @eeprom_data: value to write
1214 * Performs byte write operation to SFP module's EEPROM over I2C interface.
1216 s32
ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw
*hw
, u8 byte_offset
,
1219 return hw
->phy
.ops
.write_i2c_byte(hw
, byte_offset
,
1220 IXGBE_I2C_EEPROM_DEV_ADDR
,
1225 * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C
1226 * @hw: pointer to hardware structure
1227 * @byte_offset: byte offset to read
1230 * Performs byte read operation to SFP module's EEPROM over I2C interface at
1231 * a specified device address.
1233 s32
ixgbe_read_i2c_byte_generic(struct ixgbe_hw
*hw
, u8 byte_offset
,
1234 u8 dev_addr
, u8
*data
)
1243 if (IXGBE_READ_REG(hw
, IXGBE_STATUS
) & IXGBE_STATUS_LAN_ID_1
)
1244 swfw_mask
= IXGBE_GSSR_PHY1_SM
;
1246 swfw_mask
= IXGBE_GSSR_PHY0_SM
;
1249 if (hw
->mac
.ops
.acquire_swfw_sync(hw
, swfw_mask
) != 0) {
1250 status
= IXGBE_ERR_SWFW_SYNC
;
1254 ixgbe_i2c_start(hw
);
1256 /* Device Address and write indication */
1257 status
= ixgbe_clock_out_i2c_byte(hw
, dev_addr
);
1261 status
= ixgbe_get_i2c_ack(hw
);
1265 status
= ixgbe_clock_out_i2c_byte(hw
, byte_offset
);
1269 status
= ixgbe_get_i2c_ack(hw
);
1273 ixgbe_i2c_start(hw
);
1275 /* Device Address and read indication */
1276 status
= ixgbe_clock_out_i2c_byte(hw
, (dev_addr
| 0x1));
1280 status
= ixgbe_get_i2c_ack(hw
);
1284 status
= ixgbe_clock_in_i2c_byte(hw
, data
);
1288 status
= ixgbe_clock_out_i2c_bit(hw
, nack
);
1296 hw
->mac
.ops
.release_swfw_sync(hw
, swfw_mask
);
1298 ixgbe_i2c_bus_clear(hw
);
1300 if (retry
< max_retry
)
1301 hw_dbg(hw
, "I2C byte read error - Retrying.\n");
1303 hw_dbg(hw
, "I2C byte read error.\n");
1305 } while (retry
< max_retry
);
1307 hw
->mac
.ops
.release_swfw_sync(hw
, swfw_mask
);
1314 * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C
1315 * @hw: pointer to hardware structure
1316 * @byte_offset: byte offset to write
1317 * @data: value to write
1319 * Performs byte write operation to SFP module's EEPROM over I2C interface at
1320 * a specified device address.
1322 s32
ixgbe_write_i2c_byte_generic(struct ixgbe_hw
*hw
, u8 byte_offset
,
1323 u8 dev_addr
, u8 data
)
1330 if (IXGBE_READ_REG(hw
, IXGBE_STATUS
) & IXGBE_STATUS_LAN_ID_1
)
1331 swfw_mask
= IXGBE_GSSR_PHY1_SM
;
1333 swfw_mask
= IXGBE_GSSR_PHY0_SM
;
1335 if (hw
->mac
.ops
.acquire_swfw_sync(hw
, swfw_mask
) != 0) {
1336 status
= IXGBE_ERR_SWFW_SYNC
;
1337 goto write_byte_out
;
1341 ixgbe_i2c_start(hw
);
1343 status
= ixgbe_clock_out_i2c_byte(hw
, dev_addr
);
1347 status
= ixgbe_get_i2c_ack(hw
);
1351 status
= ixgbe_clock_out_i2c_byte(hw
, byte_offset
);
1355 status
= ixgbe_get_i2c_ack(hw
);
1359 status
= ixgbe_clock_out_i2c_byte(hw
, data
);
1363 status
= ixgbe_get_i2c_ack(hw
);
1371 ixgbe_i2c_bus_clear(hw
);
1373 if (retry
< max_retry
)
1374 hw_dbg(hw
, "I2C byte write error - Retrying.\n");
1376 hw_dbg(hw
, "I2C byte write error.\n");
1377 } while (retry
< max_retry
);
1379 hw
->mac
.ops
.release_swfw_sync(hw
, swfw_mask
);
1386 * ixgbe_i2c_start - Sets I2C start condition
1387 * @hw: pointer to hardware structure
1389 * Sets I2C start condition (High -> Low on SDA while SCL is High)
1391 static void ixgbe_i2c_start(struct ixgbe_hw
*hw
)
1393 u32 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1395 /* Start condition must begin with data and clock high */
1396 ixgbe_set_i2c_data(hw
, &i2cctl
, 1);
1397 ixgbe_raise_i2c_clk(hw
, &i2cctl
);
1399 /* Setup time for start condition (4.7us) */
1400 udelay(IXGBE_I2C_T_SU_STA
);
1402 ixgbe_set_i2c_data(hw
, &i2cctl
, 0);
1404 /* Hold time for start condition (4us) */
1405 udelay(IXGBE_I2C_T_HD_STA
);
1407 ixgbe_lower_i2c_clk(hw
, &i2cctl
);
1409 /* Minimum low period of clock is 4.7 us */
1410 udelay(IXGBE_I2C_T_LOW
);
1415 * ixgbe_i2c_stop - Sets I2C stop condition
1416 * @hw: pointer to hardware structure
1418 * Sets I2C stop condition (Low -> High on SDA while SCL is High)
1420 static void ixgbe_i2c_stop(struct ixgbe_hw
*hw
)
1422 u32 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1424 /* Stop condition must begin with data low and clock high */
1425 ixgbe_set_i2c_data(hw
, &i2cctl
, 0);
1426 ixgbe_raise_i2c_clk(hw
, &i2cctl
);
1428 /* Setup time for stop condition (4us) */
1429 udelay(IXGBE_I2C_T_SU_STO
);
1431 ixgbe_set_i2c_data(hw
, &i2cctl
, 1);
1433 /* bus free time between stop and start (4.7us)*/
1434 udelay(IXGBE_I2C_T_BUF
);
1438 * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C
1439 * @hw: pointer to hardware structure
1440 * @data: data byte to clock in
1442 * Clocks in one byte data via I2C data/clock
1444 static s32
ixgbe_clock_in_i2c_byte(struct ixgbe_hw
*hw
, u8
*data
)
1449 for (i
= 7; i
>= 0; i
--) {
1450 ixgbe_clock_in_i2c_bit(hw
, &bit
);
1458 * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C
1459 * @hw: pointer to hardware structure
1460 * @data: data byte clocked out
1462 * Clocks out one byte data via I2C data/clock
1464 static s32
ixgbe_clock_out_i2c_byte(struct ixgbe_hw
*hw
, u8 data
)
1471 for (i
= 7; i
>= 0; i
--) {
1472 bit
= (data
>> i
) & 0x1;
1473 status
= ixgbe_clock_out_i2c_bit(hw
, bit
);
1479 /* Release SDA line (set high) */
1480 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1481 i2cctl
|= IXGBE_I2C_DATA_OUT
;
1482 IXGBE_WRITE_REG(hw
, IXGBE_I2CCTL
, i2cctl
);
1483 IXGBE_WRITE_FLUSH(hw
);
1489 * ixgbe_get_i2c_ack - Polls for I2C ACK
1490 * @hw: pointer to hardware structure
1492 * Clocks in/out one bit via I2C data/clock
1494 static s32
ixgbe_get_i2c_ack(struct ixgbe_hw
*hw
)
1498 u32 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1502 ixgbe_raise_i2c_clk(hw
, &i2cctl
);
1505 /* Minimum high period of clock is 4us */
1506 udelay(IXGBE_I2C_T_HIGH
);
1508 /* Poll for ACK. Note that ACK in I2C spec is
1509 * transition from 1 to 0 */
1510 for (i
= 0; i
< timeout
; i
++) {
1511 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1512 ack
= ixgbe_get_i2c_data(&i2cctl
);
1520 hw_dbg(hw
, "I2C ack was not received.\n");
1521 status
= IXGBE_ERR_I2C
;
1524 ixgbe_lower_i2c_clk(hw
, &i2cctl
);
1526 /* Minimum low period of clock is 4.7 us */
1527 udelay(IXGBE_I2C_T_LOW
);
1533 * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock
1534 * @hw: pointer to hardware structure
1535 * @data: read data value
1537 * Clocks in one bit via I2C data/clock
1539 static s32
ixgbe_clock_in_i2c_bit(struct ixgbe_hw
*hw
, bool *data
)
1541 u32 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1543 ixgbe_raise_i2c_clk(hw
, &i2cctl
);
1545 /* Minimum high period of clock is 4us */
1546 udelay(IXGBE_I2C_T_HIGH
);
1548 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1549 *data
= ixgbe_get_i2c_data(&i2cctl
);
1551 ixgbe_lower_i2c_clk(hw
, &i2cctl
);
1553 /* Minimum low period of clock is 4.7 us */
1554 udelay(IXGBE_I2C_T_LOW
);
1560 * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock
1561 * @hw: pointer to hardware structure
1562 * @data: data value to write
1564 * Clocks out one bit via I2C data/clock
1566 static s32
ixgbe_clock_out_i2c_bit(struct ixgbe_hw
*hw
, bool data
)
1569 u32 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1571 status
= ixgbe_set_i2c_data(hw
, &i2cctl
, data
);
1573 ixgbe_raise_i2c_clk(hw
, &i2cctl
);
1575 /* Minimum high period of clock is 4us */
1576 udelay(IXGBE_I2C_T_HIGH
);
1578 ixgbe_lower_i2c_clk(hw
, &i2cctl
);
1580 /* Minimum low period of clock is 4.7 us.
1581 * This also takes care of the data hold time.
1583 udelay(IXGBE_I2C_T_LOW
);
1585 status
= IXGBE_ERR_I2C
;
1586 hw_dbg(hw
, "I2C data was not set to %X\n", data
);
1592 * ixgbe_raise_i2c_clk - Raises the I2C SCL clock
1593 * @hw: pointer to hardware structure
1594 * @i2cctl: Current value of I2CCTL register
1596 * Raises the I2C clock line '0'->'1'
1598 static void ixgbe_raise_i2c_clk(struct ixgbe_hw
*hw
, u32
*i2cctl
)
1601 u32 timeout
= IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT
;
1604 for (i
= 0; i
< timeout
; i
++) {
1605 *i2cctl
|= IXGBE_I2C_CLK_OUT
;
1606 IXGBE_WRITE_REG(hw
, IXGBE_I2CCTL
, *i2cctl
);
1607 IXGBE_WRITE_FLUSH(hw
);
1608 /* SCL rise time (1000ns) */
1609 udelay(IXGBE_I2C_T_RISE
);
1611 i2cctl_r
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1612 if (i2cctl_r
& IXGBE_I2C_CLK_IN
)
1618 * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock
1619 * @hw: pointer to hardware structure
1620 * @i2cctl: Current value of I2CCTL register
1622 * Lowers the I2C clock line '1'->'0'
1624 static void ixgbe_lower_i2c_clk(struct ixgbe_hw
*hw
, u32
*i2cctl
)
1627 *i2cctl
&= ~IXGBE_I2C_CLK_OUT
;
1629 IXGBE_WRITE_REG(hw
, IXGBE_I2CCTL
, *i2cctl
);
1630 IXGBE_WRITE_FLUSH(hw
);
1632 /* SCL fall time (300ns) */
1633 udelay(IXGBE_I2C_T_FALL
);
1637 * ixgbe_set_i2c_data - Sets the I2C data bit
1638 * @hw: pointer to hardware structure
1639 * @i2cctl: Current value of I2CCTL register
1640 * @data: I2C data value (0 or 1) to set
1642 * Sets the I2C data bit
1644 static s32
ixgbe_set_i2c_data(struct ixgbe_hw
*hw
, u32
*i2cctl
, bool data
)
1649 *i2cctl
|= IXGBE_I2C_DATA_OUT
;
1651 *i2cctl
&= ~IXGBE_I2C_DATA_OUT
;
1653 IXGBE_WRITE_REG(hw
, IXGBE_I2CCTL
, *i2cctl
);
1654 IXGBE_WRITE_FLUSH(hw
);
1656 /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */
1657 udelay(IXGBE_I2C_T_RISE
+ IXGBE_I2C_T_FALL
+ IXGBE_I2C_T_SU_DATA
);
1659 /* Verify data was set correctly */
1660 *i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1661 if (data
!= ixgbe_get_i2c_data(i2cctl
)) {
1662 status
= IXGBE_ERR_I2C
;
1663 hw_dbg(hw
, "Error - I2C data was not set to %X.\n", data
);
1670 * ixgbe_get_i2c_data - Reads the I2C SDA data bit
1671 * @hw: pointer to hardware structure
1672 * @i2cctl: Current value of I2CCTL register
1674 * Returns the I2C data bit value
1676 static bool ixgbe_get_i2c_data(u32
*i2cctl
)
1680 if (*i2cctl
& IXGBE_I2C_DATA_IN
)
1689 * ixgbe_i2c_bus_clear - Clears the I2C bus
1690 * @hw: pointer to hardware structure
1692 * Clears the I2C bus by sending nine clock pulses.
1693 * Used when data line is stuck low.
1695 static void ixgbe_i2c_bus_clear(struct ixgbe_hw
*hw
)
1697 u32 i2cctl
= IXGBE_READ_REG(hw
, IXGBE_I2CCTL
);
1700 ixgbe_i2c_start(hw
);
1702 ixgbe_set_i2c_data(hw
, &i2cctl
, 1);
1704 for (i
= 0; i
< 9; i
++) {
1705 ixgbe_raise_i2c_clk(hw
, &i2cctl
);
1707 /* Min high period of clock is 4us */
1708 udelay(IXGBE_I2C_T_HIGH
);
1710 ixgbe_lower_i2c_clk(hw
, &i2cctl
);
1712 /* Min low period of clock is 4.7us*/
1713 udelay(IXGBE_I2C_T_LOW
);
1716 ixgbe_i2c_start(hw
);
1718 /* Put the i2c bus back to default state */
1723 * ixgbe_tn_check_overtemp - Checks if an overtemp occurred.
1724 * @hw: pointer to hardware structure
1726 * Checks if the LASI temp alarm status was triggered due to overtemp
1728 s32
ixgbe_tn_check_overtemp(struct ixgbe_hw
*hw
)
1733 if (hw
->device_id
!= IXGBE_DEV_ID_82599_T3_LOM
)
1736 /* Check that the LASI temp alarm status was triggered */
1737 hw
->phy
.ops
.read_reg(hw
, IXGBE_TN_LASI_STATUS_REG
,
1738 MDIO_MMD_PMAPMD
, &phy_data
);
1740 if (!(phy_data
& IXGBE_TN_LASI_STATUS_TEMP_ALARM
))
1743 status
= IXGBE_ERR_OVERTEMP
;