drivers/net/ethernet/realtek/Kconfig

   1 #
   2 # Realtek device configuration
   3 #
   4
   5 config NET_VENDOR_REALTEK
   6         bool "Realtek devices"
   7         default y
   8         depends on PCI || (PARPORT && X86)
   9         ---help---
  10           If you have a network (Ethernet) card belonging to this class, say Y.
  11
  12           Note that the answer to this question doesn't directly affect the
  13           kernel: saying N will just cause the configurator to skip all
  14           the questions about Realtek devices. If you say Y, you will be asked for
  15           your specific card in the following questions.
  16
  17 if NET_VENDOR_REALTEK
  18
  19 config ATP
  20         tristate "AT-LAN-TEC/RealTek pocket adapter support"
  21         depends on PARPORT && X86
  22         select CRC32
  23         ---help---
  24           This is a network (Ethernet) device which attaches to your parallel
  25           port. Read the file <file:drivers/net/ethernet/realtek/atp.c>
  26           if you want to use this.  If you intend to use this driver, you
  27           should have said N to the "Parallel printer support", because the two
  28           drivers don't like each other.
  29
  30           To compile this driver as a module, choose M here: the module
  31           will be called atp.
  32
  33 config 8139CP
  34         tristate "RealTek RTL-8139 C+ PCI Fast Ethernet Adapter support"
  35         depends on PCI
  36         select CRC32
  37         select MII
  38         ---help---
  39           This is a driver for the Fast Ethernet PCI network cards based on
  40           the RTL8139C+ chips. If you have one of those, say Y here.
  41
  42           To compile this driver as a module, choose M here: the module
  43           will be called 8139cp.  This is recommended.
  44
  45 config 8139TOO
  46         tristate "RealTek RTL-8129/8130/8139 PCI Fast Ethernet Adapter support"
  47         depends on PCI
  48         select CRC32
  49         select MII
  50         ---help---
  51           This is a driver for the Fast Ethernet PCI network cards based on
  52           the RTL 8129/8130/8139 chips. If you have one of those, say Y here.
  53
  54           To compile this driver as a module, choose M here: the module
  55           will be called 8139too.  This is recommended.
  56
  57 config 8139TOO_PIO
  58         bool "Use PIO instead of MMIO"
  59         default y
  60         depends on 8139TOO
  61         ---help---
  62           This instructs the driver to use programmed I/O ports (PIO) instead
  63           of PCI shared memory (MMIO).  This can possibly solve some problems
  64           in case your mainboard has memory consistency issues.  If unsure,
  65           say N.
  66
  67 config 8139TOO_TUNE_TWISTER
  68         bool "Support for uncommon RTL-8139 rev. K (automatic channel equalization)"
  69         depends on 8139TOO
  70         ---help---
  71           This implements a function which might come in handy in case you
  72           are using low quality on long cabling. It is required for RealTek
  73           RTL-8139 revision K boards, and totally unused otherwise.  It tries
  74           to match the transceiver to the cable characteristics. This is
  75           experimental since hardly documented by the manufacturer.
  76           If unsure, say Y.
  77
  78 config 8139TOO_8129
  79         bool "Support for older RTL-8129/8130 boards"
  80         depends on 8139TOO
  81         ---help---
  82           This enables support for the older and uncommon RTL-8129 and
  83           RTL-8130 chips, which support MII via an external transceiver,
  84           instead of an internal one.  Disabling this option will save some
  85           memory by making the code size smaller.  If unsure, say Y.
  86
  87 config 8139_OLD_RX_RESET
  88         bool "Use older RX-reset method"
  89         depends on 8139TOO
  90         ---help---
  91           The 8139too driver was recently updated to contain a more rapid
  92           reset sequence, in the face of severe receive errors.  This "new"
  93           RX-reset method should be adequate for all boards.  But if you
  94           experience problems, you can enable this option to restore the
  95           old RX-reset behavior.  If unsure, say N.
  96
  97 config R8169
  98         tristate "Realtek 8169 gigabit ethernet support"
  99         depends on PCI
 100         select FW_LOADER
 101         select CRC32
 102         select MII
 103         ---help---
 104           Say Y here if you have a Realtek 8169 PCI Gigabit Ethernet adapter.
 105
 106           To compile this driver as a module, choose M here: the module
 107           will be called r8169.  This is recommended.
 108
 109 endif # NET_VENDOR_REALTEK