1 /*******************************************************************************
2 This is the driver for the ST MAC 10/100/1000 on-chip Ethernet controllers.
3 ST Ethernet IPs are built around a Synopsys IP Core.
5 Copyright(C) 2007-2011 STMicroelectronics Ltd
7 This program is free software; you can redistribute it and/or modify it
8 under the terms and conditions of the GNU General Public License,
9 version 2, as published by the Free Software Foundation.
11 This program is distributed in the hope it will be useful, but WITHOUT
12 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
13 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
16 You should have received a copy of the GNU General Public License along with
17 this program; if not, write to the Free Software Foundation, Inc.,
18 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
20 The full GNU General Public License is included in this distribution in
21 the file called "COPYING".
23 Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
25 Documentation available at:
26 http://www.stlinux.com
28 https://bugzilla.stlinux.com/
29 *******************************************************************************/
31 #include <linux/clk.h>
32 #include <linux/kernel.h>
33 #include <linux/interrupt.h>
35 #include <linux/tcp.h>
36 #include <linux/skbuff.h>
37 #include <linux/ethtool.h>
38 #include <linux/if_ether.h>
39 #include <linux/crc32.h>
40 #include <linux/mii.h>
42 #include <linux/if_vlan.h>
43 #include <linux/dma-mapping.h>
44 #include <linux/slab.h>
45 #include <linux/prefetch.h>
46 #ifdef CONFIG_STMMAC_DEBUG_FS
47 #include <linux/debugfs.h>
48 #include <linux/seq_file.h>
49 #endif /* CONFIG_STMMAC_DEBUG_FS */
50 #include <linux/net_tstamp.h>
51 #include "stmmac_ptp.h"
54 #define STMMAC_ALIGN(x) L1_CACHE_ALIGN(x)
55 #define JUMBO_LEN 9000
57 /* Module parameters */
59 static int watchdog
= TX_TIMEO
;
60 module_param(watchdog
, int, S_IRUGO
| S_IWUSR
);
61 MODULE_PARM_DESC(watchdog
, "Transmit timeout in milliseconds (default 5s)");
63 static int debug
= -1;
64 module_param(debug
, int, S_IRUGO
| S_IWUSR
);
65 MODULE_PARM_DESC(debug
, "Message Level (-1: default, 0: no output, 16: all)");
68 module_param(phyaddr
, int, S_IRUGO
);
69 MODULE_PARM_DESC(phyaddr
, "Physical device address");
71 #define DMA_TX_SIZE 256
72 static int dma_txsize
= DMA_TX_SIZE
;
73 module_param(dma_txsize
, int, S_IRUGO
| S_IWUSR
);
74 MODULE_PARM_DESC(dma_txsize
, "Number of descriptors in the TX list");
76 #define DMA_RX_SIZE 256
77 static int dma_rxsize
= DMA_RX_SIZE
;
78 module_param(dma_rxsize
, int, S_IRUGO
| S_IWUSR
);
79 MODULE_PARM_DESC(dma_rxsize
, "Number of descriptors in the RX list");
81 static int flow_ctrl
= FLOW_OFF
;
82 module_param(flow_ctrl
, int, S_IRUGO
| S_IWUSR
);
83 MODULE_PARM_DESC(flow_ctrl
, "Flow control ability [on/off]");
85 static int pause
= PAUSE_TIME
;
86 module_param(pause
, int, S_IRUGO
| S_IWUSR
);
87 MODULE_PARM_DESC(pause
, "Flow Control Pause Time");
90 static int tc
= TC_DEFAULT
;
91 module_param(tc
, int, S_IRUGO
| S_IWUSR
);
92 MODULE_PARM_DESC(tc
, "DMA threshold control value");
94 #define DMA_BUFFER_SIZE BUF_SIZE_2KiB
95 static int buf_sz
= DMA_BUFFER_SIZE
;
96 module_param(buf_sz
, int, S_IRUGO
| S_IWUSR
);
97 MODULE_PARM_DESC(buf_sz
, "DMA buffer size");
99 static const u32 default_msg_level
= (NETIF_MSG_DRV
| NETIF_MSG_PROBE
|
100 NETIF_MSG_LINK
| NETIF_MSG_IFUP
|
101 NETIF_MSG_IFDOWN
| NETIF_MSG_TIMER
);
103 #define STMMAC_DEFAULT_LPI_TIMER 1000
104 static int eee_timer
= STMMAC_DEFAULT_LPI_TIMER
;
105 module_param(eee_timer
, int, S_IRUGO
| S_IWUSR
);
106 MODULE_PARM_DESC(eee_timer
, "LPI tx expiration time in msec");
107 #define STMMAC_LPI_T(x) (jiffies + msecs_to_jiffies(x))
109 /* By default the driver will use the ring mode to manage tx and rx descriptors
110 * but passing this value so user can force to use the chain instead of the ring
112 static unsigned int chain_mode
;
113 module_param(chain_mode
, int, S_IRUGO
);
114 MODULE_PARM_DESC(chain_mode
, "To use chain instead of ring mode");
116 static irqreturn_t
stmmac_interrupt(int irq
, void *dev_id
);
118 #ifdef CONFIG_STMMAC_DEBUG_FS
119 static int stmmac_init_fs(struct net_device
*dev
);
120 static void stmmac_exit_fs(void);
123 #define STMMAC_COAL_TIMER(x) (jiffies + usecs_to_jiffies(x))
126 * stmmac_verify_args - verify the driver parameters.
127 * Description: it verifies if some wrong parameter is passed to the driver.
128 * Note that wrong parameters are replaced with the default values.
130 static void stmmac_verify_args(void)
132 if (unlikely(watchdog
< 0))
134 if (unlikely(dma_rxsize
< 0))
135 dma_rxsize
= DMA_RX_SIZE
;
136 if (unlikely(dma_txsize
< 0))
137 dma_txsize
= DMA_TX_SIZE
;
138 if (unlikely((buf_sz
< DMA_BUFFER_SIZE
) || (buf_sz
> BUF_SIZE_16KiB
)))
139 buf_sz
= DMA_BUFFER_SIZE
;
140 if (unlikely(flow_ctrl
> 1))
141 flow_ctrl
= FLOW_AUTO
;
142 else if (likely(flow_ctrl
< 0))
143 flow_ctrl
= FLOW_OFF
;
144 if (unlikely((pause
< 0) || (pause
> 0xffff)))
147 eee_timer
= STMMAC_DEFAULT_LPI_TIMER
;
151 * stmmac_clk_csr_set - dynamically set the MDC clock
152 * @priv: driver private structure
153 * Description: this is to dynamically set the MDC clock according to the csr
156 * If a specific clk_csr value is passed from the platform
157 * this means that the CSR Clock Range selection cannot be
158 * changed at run-time and it is fixed (as reported in the driver
159 * documentation). Viceversa the driver will try to set the MDC
160 * clock dynamically according to the actual clock input.
162 static void stmmac_clk_csr_set(struct stmmac_priv
*priv
)
166 clk_rate
= clk_get_rate(priv
->stmmac_clk
);
168 /* Platform provided default clk_csr would be assumed valid
169 * for all other cases except for the below mentioned ones.
170 * For values higher than the IEEE 802.3 specified frequency
171 * we can not estimate the proper divider as it is not known
172 * the frequency of clk_csr_i. So we do not change the default
175 if (!(priv
->clk_csr
& MAC_CSR_H_FRQ_MASK
)) {
176 if (clk_rate
< CSR_F_35M
)
177 priv
->clk_csr
= STMMAC_CSR_20_35M
;
178 else if ((clk_rate
>= CSR_F_35M
) && (clk_rate
< CSR_F_60M
))
179 priv
->clk_csr
= STMMAC_CSR_35_60M
;
180 else if ((clk_rate
>= CSR_F_60M
) && (clk_rate
< CSR_F_100M
))
181 priv
->clk_csr
= STMMAC_CSR_60_100M
;
182 else if ((clk_rate
>= CSR_F_100M
) && (clk_rate
< CSR_F_150M
))
183 priv
->clk_csr
= STMMAC_CSR_100_150M
;
184 else if ((clk_rate
>= CSR_F_150M
) && (clk_rate
< CSR_F_250M
))
185 priv
->clk_csr
= STMMAC_CSR_150_250M
;
186 else if ((clk_rate
>= CSR_F_250M
) && (clk_rate
< CSR_F_300M
))
187 priv
->clk_csr
= STMMAC_CSR_250_300M
;
191 static void print_pkt(unsigned char *buf
, int len
)
194 pr_debug("len = %d byte, buf addr: 0x%p", len
, buf
);
195 for (j
= 0; j
< len
; j
++) {
197 pr_debug("\n %03x:", j
);
198 pr_debug(" %02x", buf
[j
]);
203 /* minimum number of free TX descriptors required to wake up TX process */
204 #define STMMAC_TX_THRESH(x) (x->dma_tx_size/4)
206 static inline u32
stmmac_tx_avail(struct stmmac_priv
*priv
)
208 return priv
->dirty_tx
+ priv
->dma_tx_size
- priv
->cur_tx
- 1;
212 * stmmac_hw_fix_mac_speed: callback for speed selection
213 * @priv: driver private structure
214 * Description: on some platforms (e.g. ST), some HW system configuraton
215 * registers have to be set according to the link speed negotiated.
217 static inline void stmmac_hw_fix_mac_speed(struct stmmac_priv
*priv
)
219 struct phy_device
*phydev
= priv
->phydev
;
221 if (likely(priv
->plat
->fix_mac_speed
))
222 priv
->plat
->fix_mac_speed(priv
->plat
->bsp_priv
, phydev
->speed
);
226 * stmmac_enable_eee_mode: Check and enter in LPI mode
227 * @priv: driver private structure
228 * Description: this function is to verify and enter in LPI mode for EEE.
230 static void stmmac_enable_eee_mode(struct stmmac_priv
*priv
)
232 /* Check and enter in LPI mode */
233 if ((priv
->dirty_tx
== priv
->cur_tx
) &&
234 (priv
->tx_path_in_lpi_mode
== false))
235 priv
->hw
->mac
->set_eee_mode(priv
->ioaddr
);
239 * stmmac_disable_eee_mode: disable/exit from EEE
240 * @priv: driver private structure
241 * Description: this function is to exit and disable EEE in case of
242 * LPI state is true. This is called by the xmit.
244 void stmmac_disable_eee_mode(struct stmmac_priv
*priv
)
246 priv
->hw
->mac
->reset_eee_mode(priv
->ioaddr
);
247 del_timer_sync(&priv
->eee_ctrl_timer
);
248 priv
->tx_path_in_lpi_mode
= false;
252 * stmmac_eee_ctrl_timer: EEE TX SW timer.
255 * if there is no data transfer and if we are not in LPI state,
256 * then MAC Transmitter can be moved to LPI state.
258 static void stmmac_eee_ctrl_timer(unsigned long arg
)
260 struct stmmac_priv
*priv
= (struct stmmac_priv
*)arg
;
262 stmmac_enable_eee_mode(priv
);
263 mod_timer(&priv
->eee_ctrl_timer
, STMMAC_LPI_T(eee_timer
));
267 * stmmac_eee_init: init EEE
268 * @priv: driver private structure
270 * If the EEE support has been enabled while configuring the driver,
271 * if the GMAC actually supports the EEE (from the HW cap reg) and the
272 * phy can also manage EEE, so enable the LPI state and start the timer
273 * to verify if the tx path can enter in LPI state.
275 bool stmmac_eee_init(struct stmmac_priv
*priv
)
279 /* Using PCS we cannot dial with the phy registers at this stage
280 * so we do not support extra feature like EEE.
282 if ((priv
->pcs
== STMMAC_PCS_RGMII
) || (priv
->pcs
== STMMAC_PCS_TBI
) ||
283 (priv
->pcs
== STMMAC_PCS_RTBI
))
286 /* MAC core supports the EEE feature. */
287 if (priv
->dma_cap
.eee
) {
288 /* Check if the PHY supports EEE */
289 if (phy_init_eee(priv
->phydev
, 1))
292 if (!priv
->eee_active
) {
293 priv
->eee_active
= 1;
294 init_timer(&priv
->eee_ctrl_timer
);
295 priv
->eee_ctrl_timer
.function
= stmmac_eee_ctrl_timer
;
296 priv
->eee_ctrl_timer
.data
= (unsigned long)priv
;
297 priv
->eee_ctrl_timer
.expires
= STMMAC_LPI_T(eee_timer
);
298 add_timer(&priv
->eee_ctrl_timer
);
300 priv
->hw
->mac
->set_eee_timer(priv
->ioaddr
,
301 STMMAC_DEFAULT_LIT_LS
,
304 /* Set HW EEE according to the speed */
305 priv
->hw
->mac
->set_eee_pls(priv
->ioaddr
,
308 pr_info("stmmac: Energy-Efficient Ethernet initialized\n");
316 /* stmmac_get_tx_hwtstamp: get HW TX timestamps
317 * @priv: driver private structure
318 * @entry : descriptor index to be used.
319 * @skb : the socket buffer
321 * This function will read timestamp from the descriptor & pass it to stack.
322 * and also perform some sanity checks.
324 static void stmmac_get_tx_hwtstamp(struct stmmac_priv
*priv
,
325 unsigned int entry
, struct sk_buff
*skb
)
327 struct skb_shared_hwtstamps shhwtstamp
;
331 if (!priv
->hwts_tx_en
)
334 /* exit if skb doesn't support hw tstamp */
335 if (likely(!(skb_shinfo(skb
)->tx_flags
& SKBTX_IN_PROGRESS
)))
339 desc
= (priv
->dma_etx
+ entry
);
341 desc
= (priv
->dma_tx
+ entry
);
343 /* check tx tstamp status */
344 if (!priv
->hw
->desc
->get_tx_timestamp_status((struct dma_desc
*)desc
))
347 /* get the valid tstamp */
348 ns
= priv
->hw
->desc
->get_timestamp(desc
, priv
->adv_ts
);
350 memset(&shhwtstamp
, 0, sizeof(struct skb_shared_hwtstamps
));
351 shhwtstamp
.hwtstamp
= ns_to_ktime(ns
);
352 /* pass tstamp to stack */
353 skb_tstamp_tx(skb
, &shhwtstamp
);
358 /* stmmac_get_rx_hwtstamp: get HW RX timestamps
359 * @priv: driver private structure
360 * @entry : descriptor index to be used.
361 * @skb : the socket buffer
363 * This function will read received packet's timestamp from the descriptor
364 * and pass it to stack. It also perform some sanity checks.
366 static void stmmac_get_rx_hwtstamp(struct stmmac_priv
*priv
,
367 unsigned int entry
, struct sk_buff
*skb
)
369 struct skb_shared_hwtstamps
*shhwtstamp
= NULL
;
373 if (!priv
->hwts_rx_en
)
377 desc
= (priv
->dma_erx
+ entry
);
379 desc
= (priv
->dma_rx
+ entry
);
381 /* exit if rx tstamp is not valid */
382 if (!priv
->hw
->desc
->get_rx_timestamp_status(desc
, priv
->adv_ts
))
385 /* get valid tstamp */
386 ns
= priv
->hw
->desc
->get_timestamp(desc
, priv
->adv_ts
);
387 shhwtstamp
= skb_hwtstamps(skb
);
388 memset(shhwtstamp
, 0, sizeof(struct skb_shared_hwtstamps
));
389 shhwtstamp
->hwtstamp
= ns_to_ktime(ns
);
393 * stmmac_hwtstamp_ioctl - control hardware timestamping.
394 * @dev: device pointer.
395 * @ifr: An IOCTL specefic structure, that can contain a pointer to
396 * a proprietary structure used to pass information to the driver.
398 * This function configures the MAC to enable/disable both outgoing(TX)
399 * and incoming(RX) packets time stamping based on user input.
401 * 0 on success and an appropriate -ve integer on failure.
403 static int stmmac_hwtstamp_ioctl(struct net_device
*dev
, struct ifreq
*ifr
)
405 struct stmmac_priv
*priv
= netdev_priv(dev
);
406 struct hwtstamp_config config
;
411 u32 ptp_over_ipv4_udp
= 0;
412 u32 ptp_over_ipv6_udp
= 0;
413 u32 ptp_over_ethernet
= 0;
414 u32 snap_type_sel
= 0;
415 u32 ts_master_en
= 0;
419 if (!(priv
->dma_cap
.time_stamp
|| priv
->adv_ts
)) {
420 netdev_alert(priv
->dev
, "No support for HW time stamping\n");
421 priv
->hwts_tx_en
= 0;
422 priv
->hwts_rx_en
= 0;
427 if (copy_from_user(&config
, ifr
->ifr_data
,
428 sizeof(struct hwtstamp_config
)))
431 pr_debug("%s config flags:0x%x, tx_type:0x%x, rx_filter:0x%x\n",
432 __func__
, config
.flags
, config
.tx_type
, config
.rx_filter
);
434 /* reserved for future extensions */
438 switch (config
.tx_type
) {
439 case HWTSTAMP_TX_OFF
:
440 priv
->hwts_tx_en
= 0;
443 priv
->hwts_tx_en
= 1;
450 switch (config
.rx_filter
) {
451 case HWTSTAMP_FILTER_NONE
:
452 /* time stamp no incoming packet at all */
453 config
.rx_filter
= HWTSTAMP_FILTER_NONE
;
456 case HWTSTAMP_FILTER_PTP_V1_L4_EVENT
:
457 /* PTP v1, UDP, any kind of event packet */
458 config
.rx_filter
= HWTSTAMP_FILTER_PTP_V1_L4_EVENT
;
459 /* take time stamp for all event messages */
460 snap_type_sel
= PTP_TCR_SNAPTYPSEL_1
;
462 ptp_over_ipv4_udp
= PTP_TCR_TSIPV4ENA
;
463 ptp_over_ipv6_udp
= PTP_TCR_TSIPV6ENA
;
466 case HWTSTAMP_FILTER_PTP_V1_L4_SYNC
:
467 /* PTP v1, UDP, Sync packet */
468 config
.rx_filter
= HWTSTAMP_FILTER_PTP_V1_L4_SYNC
;
469 /* take time stamp for SYNC messages only */
470 ts_event_en
= PTP_TCR_TSEVNTENA
;
472 ptp_over_ipv4_udp
= PTP_TCR_TSIPV4ENA
;
473 ptp_over_ipv6_udp
= PTP_TCR_TSIPV6ENA
;
476 case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ
:
477 /* PTP v1, UDP, Delay_req packet */
478 config
.rx_filter
= HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ
;
479 /* take time stamp for Delay_Req messages only */
480 ts_master_en
= PTP_TCR_TSMSTRENA
;
481 ts_event_en
= PTP_TCR_TSEVNTENA
;
483 ptp_over_ipv4_udp
= PTP_TCR_TSIPV4ENA
;
484 ptp_over_ipv6_udp
= PTP_TCR_TSIPV6ENA
;
487 case HWTSTAMP_FILTER_PTP_V2_L4_EVENT
:
488 /* PTP v2, UDP, any kind of event packet */
489 config
.rx_filter
= HWTSTAMP_FILTER_PTP_V2_L4_EVENT
;
490 ptp_v2
= PTP_TCR_TSVER2ENA
;
491 /* take time stamp for all event messages */
492 snap_type_sel
= PTP_TCR_SNAPTYPSEL_1
;
494 ptp_over_ipv4_udp
= PTP_TCR_TSIPV4ENA
;
495 ptp_over_ipv6_udp
= PTP_TCR_TSIPV6ENA
;
498 case HWTSTAMP_FILTER_PTP_V2_L4_SYNC
:
499 /* PTP v2, UDP, Sync packet */
500 config
.rx_filter
= HWTSTAMP_FILTER_PTP_V2_L4_SYNC
;
501 ptp_v2
= PTP_TCR_TSVER2ENA
;
502 /* take time stamp for SYNC messages only */
503 ts_event_en
= PTP_TCR_TSEVNTENA
;
505 ptp_over_ipv4_udp
= PTP_TCR_TSIPV4ENA
;
506 ptp_over_ipv6_udp
= PTP_TCR_TSIPV6ENA
;
509 case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ
:
510 /* PTP v2, UDP, Delay_req packet */
511 config
.rx_filter
= HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ
;
512 ptp_v2
= PTP_TCR_TSVER2ENA
;
513 /* take time stamp for Delay_Req messages only */
514 ts_master_en
= PTP_TCR_TSMSTRENA
;
515 ts_event_en
= PTP_TCR_TSEVNTENA
;
517 ptp_over_ipv4_udp
= PTP_TCR_TSIPV4ENA
;
518 ptp_over_ipv6_udp
= PTP_TCR_TSIPV6ENA
;
521 case HWTSTAMP_FILTER_PTP_V2_EVENT
:
522 /* PTP v2/802.AS1 any layer, any kind of event packet */
523 config
.rx_filter
= HWTSTAMP_FILTER_PTP_V2_EVENT
;
524 ptp_v2
= PTP_TCR_TSVER2ENA
;
525 /* take time stamp for all event messages */
526 snap_type_sel
= PTP_TCR_SNAPTYPSEL_1
;
528 ptp_over_ipv4_udp
= PTP_TCR_TSIPV4ENA
;
529 ptp_over_ipv6_udp
= PTP_TCR_TSIPV6ENA
;
530 ptp_over_ethernet
= PTP_TCR_TSIPENA
;
533 case HWTSTAMP_FILTER_PTP_V2_SYNC
:
534 /* PTP v2/802.AS1, any layer, Sync packet */
535 config
.rx_filter
= HWTSTAMP_FILTER_PTP_V2_SYNC
;
536 ptp_v2
= PTP_TCR_TSVER2ENA
;
537 /* take time stamp for SYNC messages only */
538 ts_event_en
= PTP_TCR_TSEVNTENA
;
540 ptp_over_ipv4_udp
= PTP_TCR_TSIPV4ENA
;
541 ptp_over_ipv6_udp
= PTP_TCR_TSIPV6ENA
;
542 ptp_over_ethernet
= PTP_TCR_TSIPENA
;
545 case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ
:
546 /* PTP v2/802.AS1, any layer, Delay_req packet */
547 config
.rx_filter
= HWTSTAMP_FILTER_PTP_V2_DELAY_REQ
;
548 ptp_v2
= PTP_TCR_TSVER2ENA
;
549 /* take time stamp for Delay_Req messages only */
550 ts_master_en
= PTP_TCR_TSMSTRENA
;
551 ts_event_en
= PTP_TCR_TSEVNTENA
;
553 ptp_over_ipv4_udp
= PTP_TCR_TSIPV4ENA
;
554 ptp_over_ipv6_udp
= PTP_TCR_TSIPV6ENA
;
555 ptp_over_ethernet
= PTP_TCR_TSIPENA
;
558 case HWTSTAMP_FILTER_ALL
:
559 /* time stamp any incoming packet */
560 config
.rx_filter
= HWTSTAMP_FILTER_ALL
;
561 tstamp_all
= PTP_TCR_TSENALL
;
568 switch (config
.rx_filter
) {
569 case HWTSTAMP_FILTER_NONE
:
570 config
.rx_filter
= HWTSTAMP_FILTER_NONE
;
573 /* PTP v1, UDP, any kind of event packet */
574 config
.rx_filter
= HWTSTAMP_FILTER_PTP_V1_L4_EVENT
;
578 priv
->hwts_rx_en
= ((config
.rx_filter
== HWTSTAMP_FILTER_NONE
) ? 0 : 1);
580 if (!priv
->hwts_tx_en
&& !priv
->hwts_rx_en
)
581 priv
->hw
->ptp
->config_hw_tstamping(priv
->ioaddr
, 0);
583 value
= (PTP_TCR_TSENA
| PTP_TCR_TSCFUPDT
| PTP_TCR_TSCTRLSSR
|
584 tstamp_all
| ptp_v2
| ptp_over_ethernet
|
585 ptp_over_ipv6_udp
| ptp_over_ipv4_udp
| ts_event_en
|
586 ts_master_en
| snap_type_sel
);
588 priv
->hw
->ptp
->config_hw_tstamping(priv
->ioaddr
, value
);
590 /* program Sub Second Increment reg */
591 priv
->hw
->ptp
->config_sub_second_increment(priv
->ioaddr
);
593 /* calculate default added value:
595 * addend = (2^32)/freq_div_ratio;
596 * where, freq_div_ratio = STMMAC_SYSCLOCK/50MHz
597 * hence, addend = ((2^32) * 50MHz)/STMMAC_SYSCLOCK;
598 * NOTE: STMMAC_SYSCLOCK should be >= 50MHz to
599 * achive 20ns accuracy.
601 * 2^x * y == (y << x), hence
602 * 2^32 * 50000000 ==> (50000000 << 32)
604 temp
= (u64
) (50000000ULL << 32);
605 priv
->default_addend
= div_u64(temp
, STMMAC_SYSCLOCK
);
606 priv
->hw
->ptp
->config_addend(priv
->ioaddr
,
607 priv
->default_addend
);
609 /* initialize system time */
610 getnstimeofday(&now
);
611 priv
->hw
->ptp
->init_systime(priv
->ioaddr
, now
.tv_sec
,
615 return copy_to_user(ifr
->ifr_data
, &config
,
616 sizeof(struct hwtstamp_config
)) ? -EFAULT
: 0;
620 * stmmac_init_ptp: init PTP
621 * @priv: driver private structure
622 * Description: this is to verify if the HW supports the PTPv1 or v2.
623 * This is done by looking at the HW cap. register.
624 * Also it registers the ptp driver.
626 static int stmmac_init_ptp(struct stmmac_priv
*priv
)
628 if (!(priv
->dma_cap
.time_stamp
|| priv
->dma_cap
.atime_stamp
))
631 if (netif_msg_hw(priv
)) {
632 if (priv
->dma_cap
.time_stamp
) {
633 pr_debug("IEEE 1588-2002 Time Stamp supported\n");
636 if (priv
->dma_cap
.atime_stamp
&& priv
->extend_desc
) {
638 ("IEEE 1588-2008 Advanced Time Stamp supported\n");
643 priv
->hw
->ptp
= &stmmac_ptp
;
644 priv
->hwts_tx_en
= 0;
645 priv
->hwts_rx_en
= 0;
647 return stmmac_ptp_register(priv
);
650 static void stmmac_release_ptp(struct stmmac_priv
*priv
)
652 stmmac_ptp_unregister(priv
);
657 * @dev: net device structure
658 * Description: it adjusts the link parameters.
660 static void stmmac_adjust_link(struct net_device
*dev
)
662 struct stmmac_priv
*priv
= netdev_priv(dev
);
663 struct phy_device
*phydev
= priv
->phydev
;
666 unsigned int fc
= priv
->flow_ctrl
, pause_time
= priv
->pause
;
671 spin_lock_irqsave(&priv
->lock
, flags
);
674 u32 ctrl
= readl(priv
->ioaddr
+ MAC_CTRL_REG
);
676 /* Now we make sure that we can be in full duplex mode.
677 * If not, we operate in half-duplex mode. */
678 if (phydev
->duplex
!= priv
->oldduplex
) {
680 if (!(phydev
->duplex
))
681 ctrl
&= ~priv
->hw
->link
.duplex
;
683 ctrl
|= priv
->hw
->link
.duplex
;
684 priv
->oldduplex
= phydev
->duplex
;
686 /* Flow Control operation */
688 priv
->hw
->mac
->flow_ctrl(priv
->ioaddr
, phydev
->duplex
,
691 if (phydev
->speed
!= priv
->speed
) {
693 switch (phydev
->speed
) {
695 if (likely(priv
->plat
->has_gmac
))
696 ctrl
&= ~priv
->hw
->link
.port
;
697 stmmac_hw_fix_mac_speed(priv
);
701 if (priv
->plat
->has_gmac
) {
702 ctrl
|= priv
->hw
->link
.port
;
703 if (phydev
->speed
== SPEED_100
) {
704 ctrl
|= priv
->hw
->link
.speed
;
706 ctrl
&= ~(priv
->hw
->link
.speed
);
709 ctrl
&= ~priv
->hw
->link
.port
;
711 stmmac_hw_fix_mac_speed(priv
);
714 if (netif_msg_link(priv
))
715 pr_warn("%s: Speed (%d) not 10/100\n",
716 dev
->name
, phydev
->speed
);
720 priv
->speed
= phydev
->speed
;
723 writel(ctrl
, priv
->ioaddr
+ MAC_CTRL_REG
);
725 if (!priv
->oldlink
) {
729 } else if (priv
->oldlink
) {
733 priv
->oldduplex
= -1;
736 if (new_state
&& netif_msg_link(priv
))
737 phy_print_status(phydev
);
739 /* At this stage, it could be needed to setup the EEE or adjust some
740 * MAC related HW registers.
742 priv
->eee_enabled
= stmmac_eee_init(priv
);
744 spin_unlock_irqrestore(&priv
->lock
, flags
);
748 * stmmac_check_pcs_mode: verify if RGMII/SGMII is supported
749 * @priv: driver private structure
750 * Description: this is to verify if the HW supports the PCS.
751 * Physical Coding Sublayer (PCS) interface that can be used when the MAC is
752 * configured for the TBI, RTBI, or SGMII PHY interface.
754 static void stmmac_check_pcs_mode(struct stmmac_priv
*priv
)
756 int interface
= priv
->plat
->interface
;
758 if (priv
->dma_cap
.pcs
) {
759 if ((interface
== PHY_INTERFACE_MODE_RGMII
) ||
760 (interface
== PHY_INTERFACE_MODE_RGMII_ID
) ||
761 (interface
== PHY_INTERFACE_MODE_RGMII_RXID
) ||
762 (interface
== PHY_INTERFACE_MODE_RGMII_TXID
)) {
763 pr_debug("STMMAC: PCS RGMII support enable\n");
764 priv
->pcs
= STMMAC_PCS_RGMII
;
765 } else if (interface
== PHY_INTERFACE_MODE_SGMII
) {
766 pr_debug("STMMAC: PCS SGMII support enable\n");
767 priv
->pcs
= STMMAC_PCS_SGMII
;
773 * stmmac_init_phy - PHY initialization
774 * @dev: net device structure
775 * Description: it initializes the driver's PHY state, and attaches the PHY
780 static int stmmac_init_phy(struct net_device
*dev
)
782 struct stmmac_priv
*priv
= netdev_priv(dev
);
783 struct phy_device
*phydev
;
784 char phy_id_fmt
[MII_BUS_ID_SIZE
+ 3];
785 char bus_id
[MII_BUS_ID_SIZE
];
786 int interface
= priv
->plat
->interface
;
789 priv
->oldduplex
= -1;
791 if (priv
->plat
->phy_bus_name
)
792 snprintf(bus_id
, MII_BUS_ID_SIZE
, "%s-%x",
793 priv
->plat
->phy_bus_name
, priv
->plat
->bus_id
);
795 snprintf(bus_id
, MII_BUS_ID_SIZE
, "stmmac-%x",
798 snprintf(phy_id_fmt
, MII_BUS_ID_SIZE
+ 3, PHY_ID_FMT
, bus_id
,
799 priv
->plat
->phy_addr
);
800 pr_debug("stmmac_init_phy: trying to attach to %s\n", phy_id_fmt
);
802 phydev
= phy_connect(dev
, phy_id_fmt
, &stmmac_adjust_link
, interface
);
804 if (IS_ERR(phydev
)) {
805 pr_err("%s: Could not attach to PHY\n", dev
->name
);
806 return PTR_ERR(phydev
);
809 /* Stop Advertising 1000BASE Capability if interface is not GMII */
810 if ((interface
== PHY_INTERFACE_MODE_MII
) ||
811 (interface
== PHY_INTERFACE_MODE_RMII
))
812 phydev
->advertising
&= ~(SUPPORTED_1000baseT_Half
|
813 SUPPORTED_1000baseT_Full
);
816 * Broken HW is sometimes missing the pull-up resistor on the
817 * MDIO line, which results in reads to non-existent devices returning
818 * 0 rather than 0xffff. Catch this here and treat 0 as a non-existent
820 * Note: phydev->phy_id is the result of reading the UID PHY registers.
822 if (phydev
->phy_id
== 0) {
823 phy_disconnect(phydev
);
826 pr_debug("stmmac_init_phy: %s: attached to PHY (UID 0x%x)"
827 " Link = %d\n", dev
->name
, phydev
->phy_id
, phydev
->link
);
829 priv
->phydev
= phydev
;
835 * stmmac_display_ring: display ring
836 * @head: pointer to the head of the ring passed.
837 * @size: size of the ring.
838 * @extend_desc: to verify if extended descriptors are used.
839 * Description: display the control/status and buffer descriptors.
841 static void stmmac_display_ring(void *head
, int size
, int extend_desc
)
844 struct dma_extended_desc
*ep
= (struct dma_extended_desc
*)head
;
845 struct dma_desc
*p
= (struct dma_desc
*)head
;
847 for (i
= 0; i
< size
; i
++) {
851 pr_info("%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
852 i
, (unsigned int)virt_to_phys(ep
),
853 (unsigned int)x
, (unsigned int)(x
>> 32),
854 ep
->basic
.des2
, ep
->basic
.des3
);
858 pr_info("%d [0x%x]: 0x%x 0x%x 0x%x 0x%x",
859 i
, (unsigned int)virt_to_phys(p
),
860 (unsigned int)x
, (unsigned int)(x
>> 32),
868 static void stmmac_display_rings(struct stmmac_priv
*priv
)
870 unsigned int txsize
= priv
->dma_tx_size
;
871 unsigned int rxsize
= priv
->dma_rx_size
;
873 if (priv
->extend_desc
) {
874 pr_info("Extended RX descriptor ring:\n");
875 stmmac_display_ring((void *)priv
->dma_erx
, rxsize
, 1);
876 pr_info("Extended TX descriptor ring:\n");
877 stmmac_display_ring((void *)priv
->dma_etx
, txsize
, 1);
879 pr_info("RX descriptor ring:\n");
880 stmmac_display_ring((void *)priv
->dma_rx
, rxsize
, 0);
881 pr_info("TX descriptor ring:\n");
882 stmmac_display_ring((void *)priv
->dma_tx
, txsize
, 0);
886 static int stmmac_set_bfsize(int mtu
, int bufsize
)
890 if (mtu
>= BUF_SIZE_4KiB
)
892 else if (mtu
>= BUF_SIZE_2KiB
)
894 else if (mtu
>= DMA_BUFFER_SIZE
)
897 ret
= DMA_BUFFER_SIZE
;
903 * stmmac_clear_descriptors: clear descriptors
904 * @priv: driver private structure
905 * Description: this function is called to clear the tx and rx descriptors
906 * in case of both basic and extended descriptors are used.
908 static void stmmac_clear_descriptors(struct stmmac_priv
*priv
)
911 unsigned int txsize
= priv
->dma_tx_size
;
912 unsigned int rxsize
= priv
->dma_rx_size
;
914 /* Clear the Rx/Tx descriptors */
915 for (i
= 0; i
< rxsize
; i
++)
916 if (priv
->extend_desc
)
917 priv
->hw
->desc
->init_rx_desc(&priv
->dma_erx
[i
].basic
,
918 priv
->use_riwt
, priv
->mode
,
921 priv
->hw
->desc
->init_rx_desc(&priv
->dma_rx
[i
],
922 priv
->use_riwt
, priv
->mode
,
924 for (i
= 0; i
< txsize
; i
++)
925 if (priv
->extend_desc
)
926 priv
->hw
->desc
->init_tx_desc(&priv
->dma_etx
[i
].basic
,
930 priv
->hw
->desc
->init_tx_desc(&priv
->dma_tx
[i
],
935 static int stmmac_init_rx_buffers(struct stmmac_priv
*priv
, struct dma_desc
*p
,
940 skb
= __netdev_alloc_skb(priv
->dev
, priv
->dma_buf_sz
+ NET_IP_ALIGN
,
943 pr_err("%s: Rx init fails; skb is NULL\n", __func__
);
946 skb_reserve(skb
, NET_IP_ALIGN
);
947 priv
->rx_skbuff
[i
] = skb
;
948 priv
->rx_skbuff_dma
[i
] = dma_map_single(priv
->device
, skb
->data
,
951 if (dma_mapping_error(priv
->device
, priv
->rx_skbuff_dma
[i
])) {
952 pr_err("%s: DMA mapping error\n", __func__
);
953 dev_kfree_skb_any(skb
);
957 p
->des2
= priv
->rx_skbuff_dma
[i
];
959 if ((priv
->mode
== STMMAC_RING_MODE
) &&
960 (priv
->dma_buf_sz
== BUF_SIZE_16KiB
))
961 priv
->hw
->ring
->init_desc3(p
);
966 static void stmmac_free_rx_buffers(struct stmmac_priv
*priv
, int i
)
968 if (priv
->rx_skbuff
[i
]) {
969 dma_unmap_single(priv
->device
, priv
->rx_skbuff_dma
[i
],
970 priv
->dma_buf_sz
, DMA_FROM_DEVICE
);
971 dev_kfree_skb_any(priv
->rx_skbuff
[i
]);
973 priv
->rx_skbuff
[i
] = NULL
;
977 * init_dma_desc_rings - init the RX/TX descriptor rings
978 * @dev: net device structure
979 * Description: this function initializes the DMA RX/TX descriptors
980 * and allocates the socket buffers. It suppors the chained and ring
983 static int init_dma_desc_rings(struct net_device
*dev
)
986 struct stmmac_priv
*priv
= netdev_priv(dev
);
987 unsigned int txsize
= priv
->dma_tx_size
;
988 unsigned int rxsize
= priv
->dma_rx_size
;
989 unsigned int bfsize
= 0;
992 /* Set the max buffer size according to the DESC mode
993 * and the MTU. Note that RING mode allows 16KiB bsize.
995 if (priv
->mode
== STMMAC_RING_MODE
)
996 bfsize
= priv
->hw
->ring
->set_16kib_bfsize(dev
->mtu
);
998 if (bfsize
< BUF_SIZE_16KiB
)
999 bfsize
= stmmac_set_bfsize(dev
->mtu
, priv
->dma_buf_sz
);
1001 if (netif_msg_probe(priv
))
1002 pr_debug("%s: txsize %d, rxsize %d, bfsize %d\n", __func__
,
1003 txsize
, rxsize
, bfsize
);
1005 if (priv
->extend_desc
) {
1006 priv
->dma_erx
= dma_alloc_coherent(priv
->device
, rxsize
*
1014 priv
->dma_etx
= dma_alloc_coherent(priv
->device
, txsize
*
1019 if (!priv
->dma_etx
) {
1020 dma_free_coherent(priv
->device
, priv
->dma_rx_size
*
1021 sizeof(struct dma_extended_desc
),
1022 priv
->dma_erx
, priv
->dma_rx_phy
);
1026 priv
->dma_rx
= dma_alloc_coherent(priv
->device
, rxsize
*
1027 sizeof(struct dma_desc
),
1033 priv
->dma_tx
= dma_alloc_coherent(priv
->device
, txsize
*
1034 sizeof(struct dma_desc
),
1037 if (!priv
->dma_tx
) {
1038 dma_free_coherent(priv
->device
, priv
->dma_rx_size
*
1039 sizeof(struct dma_desc
),
1040 priv
->dma_rx
, priv
->dma_rx_phy
);
1045 priv
->rx_skbuff_dma
= kmalloc_array(rxsize
, sizeof(dma_addr_t
),
1047 if (!priv
->rx_skbuff_dma
)
1048 goto err_rx_skbuff_dma
;
1050 priv
->rx_skbuff
= kmalloc_array(rxsize
, sizeof(struct sk_buff
*),
1052 if (!priv
->rx_skbuff
)
1055 priv
->tx_skbuff_dma
= kmalloc_array(txsize
, sizeof(dma_addr_t
),
1057 if (!priv
->tx_skbuff_dma
)
1058 goto err_tx_skbuff_dma
;
1060 priv
->tx_skbuff
= kmalloc_array(txsize
, sizeof(struct sk_buff
*),
1062 if (!priv
->tx_skbuff
)
1065 if (netif_msg_probe(priv
)) {
1066 pr_debug("(%s) dma_rx_phy=0x%08x dma_tx_phy=0x%08x\n", __func__
,
1067 (u32
) priv
->dma_rx_phy
, (u32
) priv
->dma_tx_phy
);
1069 /* RX INITIALIZATION */
1070 pr_debug("\tSKB addresses:\nskb\t\tskb data\tdma data\n");
1072 for (i
= 0; i
< rxsize
; i
++) {
1074 if (priv
->extend_desc
)
1075 p
= &((priv
->dma_erx
+ i
)->basic
);
1077 p
= priv
->dma_rx
+ i
;
1079 ret
= stmmac_init_rx_buffers(priv
, p
, i
);
1081 goto err_init_rx_buffers
;
1083 if (netif_msg_probe(priv
))
1084 pr_debug("[%p]\t[%p]\t[%x]\n", priv
->rx_skbuff
[i
],
1085 priv
->rx_skbuff
[i
]->data
,
1086 (unsigned int)priv
->rx_skbuff_dma
[i
]);
1089 priv
->dirty_rx
= (unsigned int)(i
- rxsize
);
1090 priv
->dma_buf_sz
= bfsize
;
1093 /* Setup the chained descriptor addresses */
1094 if (priv
->mode
== STMMAC_CHAIN_MODE
) {
1095 if (priv
->extend_desc
) {
1096 priv
->hw
->chain
->init(priv
->dma_erx
, priv
->dma_rx_phy
,
1098 priv
->hw
->chain
->init(priv
->dma_etx
, priv
->dma_tx_phy
,
1101 priv
->hw
->chain
->init(priv
->dma_rx
, priv
->dma_rx_phy
,
1103 priv
->hw
->chain
->init(priv
->dma_tx
, priv
->dma_tx_phy
,
1108 /* TX INITIALIZATION */
1109 for (i
= 0; i
< txsize
; i
++) {
1111 if (priv
->extend_desc
)
1112 p
= &((priv
->dma_etx
+ i
)->basic
);
1114 p
= priv
->dma_tx
+ i
;
1116 priv
->tx_skbuff_dma
[i
] = 0;
1117 priv
->tx_skbuff
[i
] = NULL
;
1123 stmmac_clear_descriptors(priv
);
1125 if (netif_msg_hw(priv
))
1126 stmmac_display_rings(priv
);
1129 err_init_rx_buffers
:
1131 stmmac_free_rx_buffers(priv
, i
);
1132 kfree(priv
->tx_skbuff
);
1134 kfree(priv
->tx_skbuff_dma
);
1136 kfree(priv
->rx_skbuff
);
1138 kfree(priv
->rx_skbuff_dma
);
1140 if (priv
->extend_desc
) {
1141 dma_free_coherent(priv
->device
, priv
->dma_tx_size
*
1142 sizeof(struct dma_extended_desc
),
1143 priv
->dma_etx
, priv
->dma_tx_phy
);
1144 dma_free_coherent(priv
->device
, priv
->dma_rx_size
*
1145 sizeof(struct dma_extended_desc
),
1146 priv
->dma_erx
, priv
->dma_rx_phy
);
1148 dma_free_coherent(priv
->device
,
1149 priv
->dma_tx_size
* sizeof(struct dma_desc
),
1150 priv
->dma_tx
, priv
->dma_tx_phy
);
1151 dma_free_coherent(priv
->device
,
1152 priv
->dma_rx_size
* sizeof(struct dma_desc
),
1153 priv
->dma_rx
, priv
->dma_rx_phy
);
1159 static void dma_free_rx_skbufs(struct stmmac_priv
*priv
)
1163 for (i
= 0; i
< priv
->dma_rx_size
; i
++)
1164 stmmac_free_rx_buffers(priv
, i
);
1167 static void dma_free_tx_skbufs(struct stmmac_priv
*priv
)
1171 for (i
= 0; i
< priv
->dma_tx_size
; i
++) {
1172 if (priv
->tx_skbuff
[i
] != NULL
) {
1174 if (priv
->extend_desc
)
1175 p
= &((priv
->dma_etx
+ i
)->basic
);
1177 p
= priv
->dma_tx
+ i
;
1179 if (priv
->tx_skbuff_dma
[i
])
1180 dma_unmap_single(priv
->device
,
1181 priv
->tx_skbuff_dma
[i
],
1182 priv
->hw
->desc
->get_tx_len(p
),
1184 dev_kfree_skb_any(priv
->tx_skbuff
[i
]);
1185 priv
->tx_skbuff
[i
] = NULL
;
1186 priv
->tx_skbuff_dma
[i
] = 0;
1191 static void free_dma_desc_resources(struct stmmac_priv
*priv
)
1193 /* Release the DMA TX/RX socket buffers */
1194 dma_free_rx_skbufs(priv
);
1195 dma_free_tx_skbufs(priv
);
1197 /* Free DMA regions of consistent memory previously allocated */
1198 if (!priv
->extend_desc
) {
1199 dma_free_coherent(priv
->device
,
1200 priv
->dma_tx_size
* sizeof(struct dma_desc
),
1201 priv
->dma_tx
, priv
->dma_tx_phy
);
1202 dma_free_coherent(priv
->device
,
1203 priv
->dma_rx_size
* sizeof(struct dma_desc
),
1204 priv
->dma_rx
, priv
->dma_rx_phy
);
1206 dma_free_coherent(priv
->device
, priv
->dma_tx_size
*
1207 sizeof(struct dma_extended_desc
),
1208 priv
->dma_etx
, priv
->dma_tx_phy
);
1209 dma_free_coherent(priv
->device
, priv
->dma_rx_size
*
1210 sizeof(struct dma_extended_desc
),
1211 priv
->dma_erx
, priv
->dma_rx_phy
);
1213 kfree(priv
->rx_skbuff_dma
);
1214 kfree(priv
->rx_skbuff
);
1215 kfree(priv
->tx_skbuff_dma
);
1216 kfree(priv
->tx_skbuff
);
1220 * stmmac_dma_operation_mode - HW DMA operation mode
1221 * @priv: driver private structure
1222 * Description: it sets the DMA operation mode: tx/rx DMA thresholds
1223 * or Store-And-Forward capability.
1225 static void stmmac_dma_operation_mode(struct stmmac_priv
*priv
)
1227 if (likely(priv
->plat
->force_sf_dma_mode
||
1228 ((priv
->plat
->tx_coe
) && (!priv
->no_csum_insertion
)))) {
1230 * In case of GMAC, SF mode can be enabled
1231 * to perform the TX COE in HW. This depends on:
1232 * 1) TX COE if actually supported
1233 * 2) There is no bugged Jumbo frame support
1234 * that needs to not insert csum in the TDES.
1236 priv
->hw
->dma
->dma_mode(priv
->ioaddr
, SF_DMA_MODE
, SF_DMA_MODE
);
1239 priv
->hw
->dma
->dma_mode(priv
->ioaddr
, tc
, SF_DMA_MODE
);
1244 * @priv: driver private structure
1245 * Description: it reclaims resources after transmission completes.
1247 static void stmmac_tx_clean(struct stmmac_priv
*priv
)
1249 unsigned int txsize
= priv
->dma_tx_size
;
1251 spin_lock(&priv
->tx_lock
);
1253 priv
->xstats
.tx_clean
++;
1255 while (priv
->dirty_tx
!= priv
->cur_tx
) {
1257 unsigned int entry
= priv
->dirty_tx
% txsize
;
1258 struct sk_buff
*skb
= priv
->tx_skbuff
[entry
];
1261 if (priv
->extend_desc
)
1262 p
= (struct dma_desc
*)(priv
->dma_etx
+ entry
);
1264 p
= priv
->dma_tx
+ entry
;
1266 /* Check if the descriptor is owned by the DMA. */
1267 if (priv
->hw
->desc
->get_tx_owner(p
))
1270 /* Verify tx error by looking at the last segment. */
1271 last
= priv
->hw
->desc
->get_tx_ls(p
);
1274 priv
->hw
->desc
->tx_status(&priv
->dev
->stats
,
1277 if (likely(tx_error
== 0)) {
1278 priv
->dev
->stats
.tx_packets
++;
1279 priv
->xstats
.tx_pkt_n
++;
1281 priv
->dev
->stats
.tx_errors
++;
1283 stmmac_get_tx_hwtstamp(priv
, entry
, skb
);
1285 if (netif_msg_tx_done(priv
))
1286 pr_debug("%s: curr %d, dirty %d\n", __func__
,
1287 priv
->cur_tx
, priv
->dirty_tx
);
1289 if (likely(priv
->tx_skbuff_dma
[entry
])) {
1290 dma_unmap_single(priv
->device
,
1291 priv
->tx_skbuff_dma
[entry
],
1292 priv
->hw
->desc
->get_tx_len(p
),
1294 priv
->tx_skbuff_dma
[entry
] = 0;
1296 priv
->hw
->ring
->clean_desc3(priv
, p
);
1298 if (likely(skb
!= NULL
)) {
1300 priv
->tx_skbuff
[entry
] = NULL
;
1303 priv
->hw
->desc
->release_tx_desc(p
, priv
->mode
);
1307 if (unlikely(netif_queue_stopped(priv
->dev
) &&
1308 stmmac_tx_avail(priv
) > STMMAC_TX_THRESH(priv
))) {
1309 netif_tx_lock(priv
->dev
);
1310 if (netif_queue_stopped(priv
->dev
) &&
1311 stmmac_tx_avail(priv
) > STMMAC_TX_THRESH(priv
)) {
1312 if (netif_msg_tx_done(priv
))
1313 pr_debug("%s: restart transmit\n", __func__
);
1314 netif_wake_queue(priv
->dev
);
1316 netif_tx_unlock(priv
->dev
);
1319 if ((priv
->eee_enabled
) && (!priv
->tx_path_in_lpi_mode
)) {
1320 stmmac_enable_eee_mode(priv
);
1321 mod_timer(&priv
->eee_ctrl_timer
, STMMAC_LPI_T(eee_timer
));
1323 spin_unlock(&priv
->tx_lock
);
1326 static inline void stmmac_enable_dma_irq(struct stmmac_priv
*priv
)
1328 priv
->hw
->dma
->enable_dma_irq(priv
->ioaddr
);
1331 static inline void stmmac_disable_dma_irq(struct stmmac_priv
*priv
)
1333 priv
->hw
->dma
->disable_dma_irq(priv
->ioaddr
);
1337 * stmmac_tx_err: irq tx error mng function
1338 * @priv: driver private structure
1339 * Description: it cleans the descriptors and restarts the transmission
1340 * in case of errors.
1342 static void stmmac_tx_err(struct stmmac_priv
*priv
)
1345 int txsize
= priv
->dma_tx_size
;
1346 netif_stop_queue(priv
->dev
);
1348 priv
->hw
->dma
->stop_tx(priv
->ioaddr
);
1349 dma_free_tx_skbufs(priv
);
1350 for (i
= 0; i
< txsize
; i
++)
1351 if (priv
->extend_desc
)
1352 priv
->hw
->desc
->init_tx_desc(&priv
->dma_etx
[i
].basic
,
1356 priv
->hw
->desc
->init_tx_desc(&priv
->dma_tx
[i
],
1361 priv
->hw
->dma
->start_tx(priv
->ioaddr
);
1363 priv
->dev
->stats
.tx_errors
++;
1364 netif_wake_queue(priv
->dev
);
1368 * stmmac_dma_interrupt: DMA ISR
1369 * @priv: driver private structure
1370 * Description: this is the DMA ISR. It is called by the main ISR.
1371 * It calls the dwmac dma routine to understand which type of interrupt
1372 * happened. In case of there is a Normal interrupt and either TX or RX
1373 * interrupt happened so the NAPI is scheduled.
1375 static void stmmac_dma_interrupt(struct stmmac_priv
*priv
)
1379 status
= priv
->hw
->dma
->dma_interrupt(priv
->ioaddr
, &priv
->xstats
);
1380 if (likely((status
& handle_rx
)) || (status
& handle_tx
)) {
1381 if (likely(napi_schedule_prep(&priv
->napi
))) {
1382 stmmac_disable_dma_irq(priv
);
1383 __napi_schedule(&priv
->napi
);
1386 if (unlikely(status
& tx_hard_error_bump_tc
)) {
1387 /* Try to bump up the dma threshold on this failure */
1388 if (unlikely(tc
!= SF_DMA_MODE
) && (tc
<= 256)) {
1390 priv
->hw
->dma
->dma_mode(priv
->ioaddr
, tc
, SF_DMA_MODE
);
1391 priv
->xstats
.threshold
= tc
;
1393 } else if (unlikely(status
== tx_hard_error
))
1394 stmmac_tx_err(priv
);
1398 * stmmac_mmc_setup: setup the Mac Management Counters (MMC)
1399 * @priv: driver private structure
1400 * Description: this masks the MMC irq, in fact, the counters are managed in SW.
1402 static void stmmac_mmc_setup(struct stmmac_priv
*priv
)
1404 unsigned int mode
= MMC_CNTRL_RESET_ON_READ
| MMC_CNTRL_COUNTER_RESET
|
1405 MMC_CNTRL_PRESET
| MMC_CNTRL_FULL_HALF_PRESET
;
1407 dwmac_mmc_intr_all_mask(priv
->ioaddr
);
1409 if (priv
->dma_cap
.rmon
) {
1410 dwmac_mmc_ctrl(priv
->ioaddr
, mode
);
1411 memset(&priv
->mmc
, 0, sizeof(struct stmmac_counters
));
1413 pr_info(" No MAC Management Counters available\n");
1416 static u32
stmmac_get_synopsys_id(struct stmmac_priv
*priv
)
1418 u32 hwid
= priv
->hw
->synopsys_uid
;
1420 /* Check Synopsys Id (not available on old chips) */
1422 u32 uid
= ((hwid
& 0x0000ff00) >> 8);
1423 u32 synid
= (hwid
& 0x000000ff);
1425 pr_info("stmmac - user ID: 0x%x, Synopsys ID: 0x%x\n",
1434 * stmmac_selec_desc_mode: to select among: normal/alternate/extend descriptors
1435 * @priv: driver private structure
1436 * Description: select the Enhanced/Alternate or Normal descriptors.
1437 * In case of Enhanced/Alternate, it looks at the extended descriptors are
1438 * supported by the HW cap. register.
1440 static void stmmac_selec_desc_mode(struct stmmac_priv
*priv
)
1442 if (priv
->plat
->enh_desc
) {
1443 pr_info(" Enhanced/Alternate descriptors\n");
1445 /* GMAC older than 3.50 has no extended descriptors */
1446 if (priv
->synopsys_id
>= DWMAC_CORE_3_50
) {
1447 pr_info("\tEnabled extended descriptors\n");
1448 priv
->extend_desc
= 1;
1450 pr_warn("Extended descriptors not supported\n");
1452 priv
->hw
->desc
= &enh_desc_ops
;
1454 pr_info(" Normal descriptors\n");
1455 priv
->hw
->desc
= &ndesc_ops
;
1460 * stmmac_get_hw_features: get MAC capabilities from the HW cap. register.
1461 * @priv: driver private structure
1463 * new GMAC chip generations have a new register to indicate the
1464 * presence of the optional feature/functions.
1465 * This can be also used to override the value passed through the
1466 * platform and necessary for old MAC10/100 and GMAC chips.
1468 static int stmmac_get_hw_features(struct stmmac_priv
*priv
)
1472 if (priv
->hw
->dma
->get_hw_feature
) {
1473 hw_cap
= priv
->hw
->dma
->get_hw_feature(priv
->ioaddr
);
1475 priv
->dma_cap
.mbps_10_100
= (hw_cap
& DMA_HW_FEAT_MIISEL
);
1476 priv
->dma_cap
.mbps_1000
= (hw_cap
& DMA_HW_FEAT_GMIISEL
) >> 1;
1477 priv
->dma_cap
.half_duplex
= (hw_cap
& DMA_HW_FEAT_HDSEL
) >> 2;
1478 priv
->dma_cap
.hash_filter
= (hw_cap
& DMA_HW_FEAT_HASHSEL
) >> 4;
1479 priv
->dma_cap
.multi_addr
= (hw_cap
& DMA_HW_FEAT_ADDMAC
) >> 5;
1480 priv
->dma_cap
.pcs
= (hw_cap
& DMA_HW_FEAT_PCSSEL
) >> 6;
1481 priv
->dma_cap
.sma_mdio
= (hw_cap
& DMA_HW_FEAT_SMASEL
) >> 8;
1482 priv
->dma_cap
.pmt_remote_wake_up
=
1483 (hw_cap
& DMA_HW_FEAT_RWKSEL
) >> 9;
1484 priv
->dma_cap
.pmt_magic_frame
=
1485 (hw_cap
& DMA_HW_FEAT_MGKSEL
) >> 10;
1487 priv
->dma_cap
.rmon
= (hw_cap
& DMA_HW_FEAT_MMCSEL
) >> 11;
1488 /* IEEE 1588-2002 */
1489 priv
->dma_cap
.time_stamp
=
1490 (hw_cap
& DMA_HW_FEAT_TSVER1SEL
) >> 12;
1491 /* IEEE 1588-2008 */
1492 priv
->dma_cap
.atime_stamp
=
1493 (hw_cap
& DMA_HW_FEAT_TSVER2SEL
) >> 13;
1494 /* 802.3az - Energy-Efficient Ethernet (EEE) */
1495 priv
->dma_cap
.eee
= (hw_cap
& DMA_HW_FEAT_EEESEL
) >> 14;
1496 priv
->dma_cap
.av
= (hw_cap
& DMA_HW_FEAT_AVSEL
) >> 15;
1497 /* TX and RX csum */
1498 priv
->dma_cap
.tx_coe
= (hw_cap
& DMA_HW_FEAT_TXCOESEL
) >> 16;
1499 priv
->dma_cap
.rx_coe_type1
=
1500 (hw_cap
& DMA_HW_FEAT_RXTYP1COE
) >> 17;
1501 priv
->dma_cap
.rx_coe_type2
=
1502 (hw_cap
& DMA_HW_FEAT_RXTYP2COE
) >> 18;
1503 priv
->dma_cap
.rxfifo_over_2048
=
1504 (hw_cap
& DMA_HW_FEAT_RXFIFOSIZE
) >> 19;
1505 /* TX and RX number of channels */
1506 priv
->dma_cap
.number_rx_channel
=
1507 (hw_cap
& DMA_HW_FEAT_RXCHCNT
) >> 20;
1508 priv
->dma_cap
.number_tx_channel
=
1509 (hw_cap
& DMA_HW_FEAT_TXCHCNT
) >> 22;
1510 /* Alternate (enhanced) DESC mode */
1511 priv
->dma_cap
.enh_desc
= (hw_cap
& DMA_HW_FEAT_ENHDESSEL
) >> 24;
1518 * stmmac_check_ether_addr: check if the MAC addr is valid
1519 * @priv: driver private structure
1521 * it is to verify if the MAC address is valid, in case of failures it
1522 * generates a random MAC address
1524 static void stmmac_check_ether_addr(struct stmmac_priv
*priv
)
1526 if (!is_valid_ether_addr(priv
->dev
->dev_addr
)) {
1527 priv
->hw
->mac
->get_umac_addr((void __iomem
*)
1528 priv
->dev
->base_addr
,
1529 priv
->dev
->dev_addr
, 0);
1530 if (!is_valid_ether_addr(priv
->dev
->dev_addr
))
1531 eth_hw_addr_random(priv
->dev
);
1533 pr_warn("%s: device MAC address %pM\n", priv
->dev
->name
,
1534 priv
->dev
->dev_addr
);
1538 * stmmac_init_dma_engine: DMA init.
1539 * @priv: driver private structure
1541 * It inits the DMA invoking the specific MAC/GMAC callback.
1542 * Some DMA parameters can be passed from the platform;
1543 * in case of these are not passed a default is kept for the MAC or GMAC.
1545 static int stmmac_init_dma_engine(struct stmmac_priv
*priv
)
1547 int pbl
= DEFAULT_DMA_PBL
, fixed_burst
= 0, burst_len
= 0;
1548 int mixed_burst
= 0;
1551 if (priv
->plat
->dma_cfg
) {
1552 pbl
= priv
->plat
->dma_cfg
->pbl
;
1553 fixed_burst
= priv
->plat
->dma_cfg
->fixed_burst
;
1554 mixed_burst
= priv
->plat
->dma_cfg
->mixed_burst
;
1555 burst_len
= priv
->plat
->dma_cfg
->burst_len
;
1558 if (priv
->extend_desc
&& (priv
->mode
== STMMAC_RING_MODE
))
1561 return priv
->hw
->dma
->init(priv
->ioaddr
, pbl
, fixed_burst
, mixed_burst
,
1562 burst_len
, priv
->dma_tx_phy
,
1563 priv
->dma_rx_phy
, atds
);
1567 * stmmac_tx_timer: mitigation sw timer for tx.
1568 * @data: data pointer
1570 * This is the timer handler to directly invoke the stmmac_tx_clean.
1572 static void stmmac_tx_timer(unsigned long data
)
1574 struct stmmac_priv
*priv
= (struct stmmac_priv
*)data
;
1576 stmmac_tx_clean(priv
);
1580 * stmmac_init_tx_coalesce: init tx mitigation options.
1581 * @priv: driver private structure
1583 * This inits the transmit coalesce parameters: i.e. timer rate,
1584 * timer handler and default threshold used for enabling the
1585 * interrupt on completion bit.
1587 static void stmmac_init_tx_coalesce(struct stmmac_priv
*priv
)
1589 priv
->tx_coal_frames
= STMMAC_TX_FRAMES
;
1590 priv
->tx_coal_timer
= STMMAC_COAL_TX_TIMER
;
1591 init_timer(&priv
->txtimer
);
1592 priv
->txtimer
.expires
= STMMAC_COAL_TIMER(priv
->tx_coal_timer
);
1593 priv
->txtimer
.data
= (unsigned long)priv
;
1594 priv
->txtimer
.function
= stmmac_tx_timer
;
1595 add_timer(&priv
->txtimer
);
1599 * stmmac_open - open entry point of the driver
1600 * @dev : pointer to the device structure.
1602 * This function is the open entry point of the driver.
1604 * 0 on success and an appropriate (-)ve integer as defined in errno.h
1607 static int stmmac_open(struct net_device
*dev
)
1609 struct stmmac_priv
*priv
= netdev_priv(dev
);
1612 clk_prepare_enable(priv
->stmmac_clk
);
1614 stmmac_check_ether_addr(priv
);
1616 if (priv
->pcs
!= STMMAC_PCS_RGMII
&& priv
->pcs
!= STMMAC_PCS_TBI
&&
1617 priv
->pcs
!= STMMAC_PCS_RTBI
) {
1618 ret
= stmmac_init_phy(dev
);
1620 pr_err("%s: Cannot attach to PHY (error: %d)\n",
1626 /* Create and initialize the TX/RX descriptors chains. */
1627 priv
->dma_tx_size
= STMMAC_ALIGN(dma_txsize
);
1628 priv
->dma_rx_size
= STMMAC_ALIGN(dma_rxsize
);
1629 priv
->dma_buf_sz
= STMMAC_ALIGN(buf_sz
);
1631 ret
= init_dma_desc_rings(dev
);
1633 pr_err("%s: DMA descriptors initialization failed\n", __func__
);
1634 goto dma_desc_error
;
1637 /* DMA initialization and SW reset */
1638 ret
= stmmac_init_dma_engine(priv
);
1640 pr_err("%s: DMA engine initialization failed\n", __func__
);
1644 /* Copy the MAC addr into the HW */
1645 priv
->hw
->mac
->set_umac_addr(priv
->ioaddr
, dev
->dev_addr
, 0);
1647 /* If required, perform hw setup of the bus. */
1648 if (priv
->plat
->bus_setup
)
1649 priv
->plat
->bus_setup(priv
->ioaddr
);
1651 /* Initialize the MAC Core */
1652 priv
->hw
->mac
->core_init(priv
->ioaddr
);
1654 /* Request the IRQ lines */
1655 ret
= request_irq(dev
->irq
, stmmac_interrupt
,
1656 IRQF_SHARED
, dev
->name
, dev
);
1657 if (unlikely(ret
< 0)) {
1658 pr_err("%s: ERROR: allocating the IRQ %d (error: %d)\n",
1659 __func__
, dev
->irq
, ret
);
1663 /* Request the Wake IRQ in case of another line is used for WoL */
1664 if (priv
->wol_irq
!= dev
->irq
) {
1665 ret
= request_irq(priv
->wol_irq
, stmmac_interrupt
,
1666 IRQF_SHARED
, dev
->name
, dev
);
1667 if (unlikely(ret
< 0)) {
1668 pr_err("%s: ERROR: allocating the WoL IRQ %d (%d)\n",
1669 __func__
, priv
->wol_irq
, ret
);
1674 /* Request the IRQ lines */
1675 if (priv
->lpi_irq
!= -ENXIO
) {
1676 ret
= request_irq(priv
->lpi_irq
, stmmac_interrupt
, IRQF_SHARED
,
1678 if (unlikely(ret
< 0)) {
1679 pr_err("%s: ERROR: allocating the LPI IRQ %d (%d)\n",
1680 __func__
, priv
->lpi_irq
, ret
);
1685 /* Enable the MAC Rx/Tx */
1686 stmmac_set_mac(priv
->ioaddr
, true);
1688 /* Set the HW DMA mode and the COE */
1689 stmmac_dma_operation_mode(priv
);
1691 /* Extra statistics */
1692 memset(&priv
->xstats
, 0, sizeof(struct stmmac_extra_stats
));
1693 priv
->xstats
.threshold
= tc
;
1695 stmmac_mmc_setup(priv
);
1697 ret
= stmmac_init_ptp(priv
);
1699 pr_warn("%s: failed PTP initialisation\n", __func__
);
1701 #ifdef CONFIG_STMMAC_DEBUG_FS
1702 ret
= stmmac_init_fs(dev
);
1704 pr_warn("%s: failed debugFS registration\n", __func__
);
1706 /* Start the ball rolling... */
1707 pr_debug("%s: DMA RX/TX processes started...\n", dev
->name
);
1708 priv
->hw
->dma
->start_tx(priv
->ioaddr
);
1709 priv
->hw
->dma
->start_rx(priv
->ioaddr
);
1711 /* Dump DMA/MAC registers */
1712 if (netif_msg_hw(priv
)) {
1713 priv
->hw
->mac
->dump_regs(priv
->ioaddr
);
1714 priv
->hw
->dma
->dump_regs(priv
->ioaddr
);
1718 phy_start(priv
->phydev
);
1720 priv
->tx_lpi_timer
= STMMAC_DEFAULT_TWT_LS
;
1722 priv
->eee_enabled
= stmmac_eee_init(priv
);
1724 stmmac_init_tx_coalesce(priv
);
1726 if ((priv
->use_riwt
) && (priv
->hw
->dma
->rx_watchdog
)) {
1727 priv
->rx_riwt
= MAX_DMA_RIWT
;
1728 priv
->hw
->dma
->rx_watchdog(priv
->ioaddr
, MAX_DMA_RIWT
);
1731 if (priv
->pcs
&& priv
->hw
->mac
->ctrl_ane
)
1732 priv
->hw
->mac
->ctrl_ane(priv
->ioaddr
, 0);
1734 napi_enable(&priv
->napi
);
1735 netif_start_queue(dev
);
1740 if (priv
->wol_irq
!= dev
->irq
)
1741 free_irq(priv
->wol_irq
, dev
);
1743 free_irq(dev
->irq
, dev
);
1746 free_dma_desc_resources(priv
);
1749 phy_disconnect(priv
->phydev
);
1751 clk_disable_unprepare(priv
->stmmac_clk
);
1757 * stmmac_release - close entry point of the driver
1758 * @dev : device pointer.
1760 * This is the stop entry point of the driver.
1762 static int stmmac_release(struct net_device
*dev
)
1764 struct stmmac_priv
*priv
= netdev_priv(dev
);
1766 if (priv
->eee_enabled
)
1767 del_timer_sync(&priv
->eee_ctrl_timer
);
1769 /* Stop and disconnect the PHY */
1771 phy_stop(priv
->phydev
);
1772 phy_disconnect(priv
->phydev
);
1773 priv
->phydev
= NULL
;
1776 netif_stop_queue(dev
);
1778 napi_disable(&priv
->napi
);
1780 del_timer_sync(&priv
->txtimer
);
1782 /* Free the IRQ lines */
1783 free_irq(dev
->irq
, dev
);
1784 if (priv
->wol_irq
!= dev
->irq
)
1785 free_irq(priv
->wol_irq
, dev
);
1786 if (priv
->lpi_irq
!= -ENXIO
)
1787 free_irq(priv
->lpi_irq
, dev
);
1789 /* Stop TX/RX DMA and clear the descriptors */
1790 priv
->hw
->dma
->stop_tx(priv
->ioaddr
);
1791 priv
->hw
->dma
->stop_rx(priv
->ioaddr
);
1793 /* Release and free the Rx/Tx resources */
1794 free_dma_desc_resources(priv
);
1796 /* Disable the MAC Rx/Tx */
1797 stmmac_set_mac(priv
->ioaddr
, false);
1799 netif_carrier_off(dev
);
1801 #ifdef CONFIG_STMMAC_DEBUG_FS
1804 clk_disable_unprepare(priv
->stmmac_clk
);
1806 stmmac_release_ptp(priv
);
1812 * stmmac_xmit: Tx entry point of the driver
1813 * @skb : the socket buffer
1814 * @dev : device pointer
1815 * Description : this is the tx entry point of the driver.
1816 * It programs the chain or the ring and supports oversized frames
1819 static netdev_tx_t
stmmac_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
1821 struct stmmac_priv
*priv
= netdev_priv(dev
);
1822 unsigned int txsize
= priv
->dma_tx_size
;
1824 int i
, csum_insertion
= 0, is_jumbo
= 0;
1825 int nfrags
= skb_shinfo(skb
)->nr_frags
;
1826 struct dma_desc
*desc
, *first
;
1827 unsigned int nopaged_len
= skb_headlen(skb
);
1829 if (unlikely(stmmac_tx_avail(priv
) < nfrags
+ 1)) {
1830 if (!netif_queue_stopped(dev
)) {
1831 netif_stop_queue(dev
);
1832 /* This is a hard error, log it. */
1833 pr_err("%s: Tx Ring full when queue awake\n", __func__
);
1835 return NETDEV_TX_BUSY
;
1838 spin_lock(&priv
->tx_lock
);
1840 if (priv
->tx_path_in_lpi_mode
)
1841 stmmac_disable_eee_mode(priv
);
1843 entry
= priv
->cur_tx
% txsize
;
1845 csum_insertion
= (skb
->ip_summed
== CHECKSUM_PARTIAL
);
1847 if (priv
->extend_desc
)
1848 desc
= (struct dma_desc
*)(priv
->dma_etx
+ entry
);
1850 desc
= priv
->dma_tx
+ entry
;
1854 priv
->tx_skbuff
[entry
] = skb
;
1856 /* To program the descriptors according to the size of the frame */
1857 if (priv
->mode
== STMMAC_RING_MODE
) {
1858 is_jumbo
= priv
->hw
->ring
->is_jumbo_frm(skb
->len
,
1859 priv
->plat
->enh_desc
);
1860 if (unlikely(is_jumbo
))
1861 entry
= priv
->hw
->ring
->jumbo_frm(priv
, skb
,
1864 is_jumbo
= priv
->hw
->chain
->is_jumbo_frm(skb
->len
,
1865 priv
->plat
->enh_desc
);
1866 if (unlikely(is_jumbo
))
1867 entry
= priv
->hw
->chain
->jumbo_frm(priv
, skb
,
1870 if (likely(!is_jumbo
)) {
1871 desc
->des2
= dma_map_single(priv
->device
, skb
->data
,
1872 nopaged_len
, DMA_TO_DEVICE
);
1873 priv
->tx_skbuff_dma
[entry
] = desc
->des2
;
1874 priv
->hw
->desc
->prepare_tx_desc(desc
, 1, nopaged_len
,
1875 csum_insertion
, priv
->mode
);
1879 for (i
= 0; i
< nfrags
; i
++) {
1880 const skb_frag_t
*frag
= &skb_shinfo(skb
)->frags
[i
];
1881 int len
= skb_frag_size(frag
);
1883 entry
= (++priv
->cur_tx
) % txsize
;
1884 if (priv
->extend_desc
)
1885 desc
= (struct dma_desc
*)(priv
->dma_etx
+ entry
);
1887 desc
= priv
->dma_tx
+ entry
;
1889 desc
->des2
= skb_frag_dma_map(priv
->device
, frag
, 0, len
,
1891 priv
->tx_skbuff_dma
[entry
] = desc
->des2
;
1892 priv
->tx_skbuff
[entry
] = NULL
;
1893 priv
->hw
->desc
->prepare_tx_desc(desc
, 0, len
, csum_insertion
,
1896 priv
->hw
->desc
->set_tx_owner(desc
);
1900 /* Finalize the latest segment. */
1901 priv
->hw
->desc
->close_tx_desc(desc
);
1904 /* According to the coalesce parameter the IC bit for the latest
1905 * segment could be reset and the timer re-started to invoke the
1906 * stmmac_tx function. This approach takes care about the fragments.
1908 priv
->tx_count_frames
+= nfrags
+ 1;
1909 if (priv
->tx_coal_frames
> priv
->tx_count_frames
) {
1910 priv
->hw
->desc
->clear_tx_ic(desc
);
1911 priv
->xstats
.tx_reset_ic_bit
++;
1912 mod_timer(&priv
->txtimer
,
1913 STMMAC_COAL_TIMER(priv
->tx_coal_timer
));
1915 priv
->tx_count_frames
= 0;
1917 /* To avoid raise condition */
1918 priv
->hw
->desc
->set_tx_owner(first
);
1923 if (netif_msg_pktdata(priv
)) {
1924 pr_debug("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d",
1925 __func__
, (priv
->cur_tx
% txsize
),
1926 (priv
->dirty_tx
% txsize
), entry
, first
, nfrags
);
1928 if (priv
->extend_desc
)
1929 stmmac_display_ring((void *)priv
->dma_etx
, txsize
, 1);
1931 stmmac_display_ring((void *)priv
->dma_tx
, txsize
, 0);
1933 pr_debug(">>> frame to be transmitted: ");
1934 print_pkt(skb
->data
, skb
->len
);
1936 if (unlikely(stmmac_tx_avail(priv
) <= (MAX_SKB_FRAGS
+ 1))) {
1937 if (netif_msg_hw(priv
))
1938 pr_debug("%s: stop transmitted packets\n", __func__
);
1939 netif_stop_queue(dev
);
1942 dev
->stats
.tx_bytes
+= skb
->len
;
1944 if (unlikely((skb_shinfo(skb
)->tx_flags
& SKBTX_HW_TSTAMP
) &&
1945 priv
->hwts_tx_en
)) {
1946 /* declare that device is doing timestamping */
1947 skb_shinfo(skb
)->tx_flags
|= SKBTX_IN_PROGRESS
;
1948 priv
->hw
->desc
->enable_tx_timestamp(first
);
1951 if (!priv
->hwts_tx_en
)
1952 skb_tx_timestamp(skb
);
1954 priv
->hw
->dma
->enable_dma_transmission(priv
->ioaddr
);
1956 spin_unlock(&priv
->tx_lock
);
1958 return NETDEV_TX_OK
;
1962 * stmmac_rx_refill: refill used skb preallocated buffers
1963 * @priv: driver private structure
1964 * Description : this is to reallocate the skb for the reception process
1965 * that is based on zero-copy.
1967 static inline void stmmac_rx_refill(struct stmmac_priv
*priv
)
1969 unsigned int rxsize
= priv
->dma_rx_size
;
1970 int bfsize
= priv
->dma_buf_sz
;
1972 for (; priv
->cur_rx
- priv
->dirty_rx
> 0; priv
->dirty_rx
++) {
1973 unsigned int entry
= priv
->dirty_rx
% rxsize
;
1976 if (priv
->extend_desc
)
1977 p
= (struct dma_desc
*)(priv
->dma_erx
+ entry
);
1979 p
= priv
->dma_rx
+ entry
;
1981 if (likely(priv
->rx_skbuff
[entry
] == NULL
)) {
1982 struct sk_buff
*skb
;
1984 skb
= netdev_alloc_skb_ip_align(priv
->dev
, bfsize
);
1986 if (unlikely(skb
== NULL
))
1989 priv
->rx_skbuff
[entry
] = skb
;
1990 priv
->rx_skbuff_dma
[entry
] =
1991 dma_map_single(priv
->device
, skb
->data
, bfsize
,
1994 p
->des2
= priv
->rx_skbuff_dma
[entry
];
1996 priv
->hw
->ring
->refill_desc3(priv
, p
);
1998 if (netif_msg_rx_status(priv
))
1999 pr_debug("\trefill entry #%d\n", entry
);
2002 priv
->hw
->desc
->set_rx_owner(p
);
2008 * stmmac_rx_refill: refill used skb preallocated buffers
2009 * @priv: driver private structure
2010 * @limit: napi bugget.
2011 * Description : this the function called by the napi poll method.
2012 * It gets all the frames inside the ring.
2014 static int stmmac_rx(struct stmmac_priv
*priv
, int limit
)
2016 unsigned int rxsize
= priv
->dma_rx_size
;
2017 unsigned int entry
= priv
->cur_rx
% rxsize
;
2018 unsigned int next_entry
;
2019 unsigned int count
= 0;
2020 int coe
= priv
->plat
->rx_coe
;
2022 if (netif_msg_rx_status(priv
)) {
2023 pr_debug("%s: descriptor ring:\n", __func__
);
2024 if (priv
->extend_desc
)
2025 stmmac_display_ring((void *)priv
->dma_erx
, rxsize
, 1);
2027 stmmac_display_ring((void *)priv
->dma_rx
, rxsize
, 0);
2029 while (count
< limit
) {
2033 if (priv
->extend_desc
)
2034 p
= (struct dma_desc
*)(priv
->dma_erx
+ entry
);
2036 p
= priv
->dma_rx
+ entry
;
2038 if (priv
->hw
->desc
->get_rx_owner(p
))
2043 next_entry
= (++priv
->cur_rx
) % rxsize
;
2044 if (priv
->extend_desc
)
2045 prefetch(priv
->dma_erx
+ next_entry
);
2047 prefetch(priv
->dma_rx
+ next_entry
);
2049 /* read the status of the incoming frame */
2050 status
= priv
->hw
->desc
->rx_status(&priv
->dev
->stats
,
2052 if ((priv
->extend_desc
) && (priv
->hw
->desc
->rx_extended_status
))
2053 priv
->hw
->desc
->rx_extended_status(&priv
->dev
->stats
,
2057 if (unlikely(status
== discard_frame
)) {
2058 priv
->dev
->stats
.rx_errors
++;
2059 if (priv
->hwts_rx_en
&& !priv
->extend_desc
) {
2060 /* DESC2 & DESC3 will be overwitten by device
2061 * with timestamp value, hence reinitialize
2062 * them in stmmac_rx_refill() function so that
2063 * device can reuse it.
2065 priv
->rx_skbuff
[entry
] = NULL
;
2066 dma_unmap_single(priv
->device
,
2067 priv
->rx_skbuff_dma
[entry
],
2072 struct sk_buff
*skb
;
2075 frame_len
= priv
->hw
->desc
->get_rx_frame_len(p
, coe
);
2077 /* ACS is set; GMAC core strips PAD/FCS for IEEE 802.3
2078 * Type frames (LLC/LLC-SNAP)
2080 if (unlikely(status
!= llc_snap
))
2081 frame_len
-= ETH_FCS_LEN
;
2083 if (netif_msg_rx_status(priv
)) {
2084 pr_debug("\tdesc: %p [entry %d] buff=0x%x\n",
2086 if (frame_len
> ETH_FRAME_LEN
)
2087 pr_debug("\tframe size %d, COE: %d\n",
2090 skb
= priv
->rx_skbuff
[entry
];
2091 if (unlikely(!skb
)) {
2092 pr_err("%s: Inconsistent Rx descriptor chain\n",
2094 priv
->dev
->stats
.rx_dropped
++;
2097 prefetch(skb
->data
- NET_IP_ALIGN
);
2098 priv
->rx_skbuff
[entry
] = NULL
;
2100 stmmac_get_rx_hwtstamp(priv
, entry
, skb
);
2102 skb_put(skb
, frame_len
);
2103 dma_unmap_single(priv
->device
,
2104 priv
->rx_skbuff_dma
[entry
],
2105 priv
->dma_buf_sz
, DMA_FROM_DEVICE
);
2107 if (netif_msg_pktdata(priv
)) {
2108 pr_debug("frame received (%dbytes)", frame_len
);
2109 print_pkt(skb
->data
, frame_len
);
2112 skb
->protocol
= eth_type_trans(skb
, priv
->dev
);
2115 skb_checksum_none_assert(skb
);
2117 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
2119 napi_gro_receive(&priv
->napi
, skb
);
2121 priv
->dev
->stats
.rx_packets
++;
2122 priv
->dev
->stats
.rx_bytes
+= frame_len
;
2127 stmmac_rx_refill(priv
);
2129 priv
->xstats
.rx_pkt_n
+= count
;
2135 * stmmac_poll - stmmac poll method (NAPI)
2136 * @napi : pointer to the napi structure.
2137 * @budget : maximum number of packets that the current CPU can receive from
2140 * To look at the incoming frames and clear the tx resources.
2142 static int stmmac_poll(struct napi_struct
*napi
, int budget
)
2144 struct stmmac_priv
*priv
= container_of(napi
, struct stmmac_priv
, napi
);
2147 priv
->xstats
.napi_poll
++;
2148 stmmac_tx_clean(priv
);
2150 work_done
= stmmac_rx(priv
, budget
);
2151 if (work_done
< budget
) {
2152 napi_complete(napi
);
2153 stmmac_enable_dma_irq(priv
);
2160 * @dev : Pointer to net device structure
2161 * Description: this function is called when a packet transmission fails to
2162 * complete within a reasonable time. The driver will mark the error in the
2163 * netdev structure and arrange for the device to be reset to a sane state
2164 * in order to transmit a new packet.
2166 static void stmmac_tx_timeout(struct net_device
*dev
)
2168 struct stmmac_priv
*priv
= netdev_priv(dev
);
2170 /* Clear Tx resources and restart transmitting again */
2171 stmmac_tx_err(priv
);
2174 /* Configuration changes (passed on by ifconfig) */
2175 static int stmmac_config(struct net_device
*dev
, struct ifmap
*map
)
2177 if (dev
->flags
& IFF_UP
) /* can't act on a running interface */
2180 /* Don't allow changing the I/O address */
2181 if (map
->base_addr
!= dev
->base_addr
) {
2182 pr_warn("%s: can't change I/O address\n", dev
->name
);
2186 /* Don't allow changing the IRQ */
2187 if (map
->irq
!= dev
->irq
) {
2188 pr_warn("%s: not change IRQ number %d\n", dev
->name
, dev
->irq
);
2196 * stmmac_set_rx_mode - entry point for multicast addressing
2197 * @dev : pointer to the device structure
2199 * This function is a driver entry point which gets called by the kernel
2200 * whenever multicast addresses must be enabled/disabled.
2204 static void stmmac_set_rx_mode(struct net_device
*dev
)
2206 struct stmmac_priv
*priv
= netdev_priv(dev
);
2208 spin_lock(&priv
->lock
);
2209 priv
->hw
->mac
->set_filter(dev
, priv
->synopsys_id
);
2210 spin_unlock(&priv
->lock
);
2214 * stmmac_change_mtu - entry point to change MTU size for the device.
2215 * @dev : device pointer.
2216 * @new_mtu : the new MTU size for the device.
2217 * Description: the Maximum Transfer Unit (MTU) is used by the network layer
2218 * to drive packet transmission. Ethernet has an MTU of 1500 octets
2219 * (ETH_DATA_LEN). This value can be changed with ifconfig.
2221 * 0 on success and an appropriate (-)ve integer as defined in errno.h
2224 static int stmmac_change_mtu(struct net_device
*dev
, int new_mtu
)
2226 struct stmmac_priv
*priv
= netdev_priv(dev
);
2229 if (netif_running(dev
)) {
2230 pr_err("%s: must be stopped to change its MTU\n", dev
->name
);
2234 if (priv
->plat
->enh_desc
)
2235 max_mtu
= JUMBO_LEN
;
2237 max_mtu
= SKB_MAX_HEAD(NET_SKB_PAD
+ NET_IP_ALIGN
);
2239 if ((new_mtu
< 46) || (new_mtu
> max_mtu
)) {
2240 pr_err("%s: invalid MTU, max MTU is: %d\n", dev
->name
, max_mtu
);
2245 netdev_update_features(dev
);
2250 static netdev_features_t
stmmac_fix_features(struct net_device
*dev
,
2251 netdev_features_t features
)
2253 struct stmmac_priv
*priv
= netdev_priv(dev
);
2255 if (priv
->plat
->rx_coe
== STMMAC_RX_COE_NONE
)
2256 features
&= ~NETIF_F_RXCSUM
;
2257 else if (priv
->plat
->rx_coe
== STMMAC_RX_COE_TYPE1
)
2258 features
&= ~NETIF_F_IPV6_CSUM
;
2259 if (!priv
->plat
->tx_coe
)
2260 features
&= ~NETIF_F_ALL_CSUM
;
2262 /* Some GMAC devices have a bugged Jumbo frame support that
2263 * needs to have the Tx COE disabled for oversized frames
2264 * (due to limited buffer sizes). In this case we disable
2265 * the TX csum insertionin the TDES and not use SF.
2267 if (priv
->plat
->bugged_jumbo
&& (dev
->mtu
> ETH_DATA_LEN
))
2268 features
&= ~NETIF_F_ALL_CSUM
;
2274 * stmmac_interrupt - main ISR
2275 * @irq: interrupt number.
2276 * @dev_id: to pass the net device pointer.
2277 * Description: this is the main driver interrupt service routine.
2278 * It calls the DMA ISR and also the core ISR to manage PMT, MMC, LPI
2281 static irqreturn_t
stmmac_interrupt(int irq
, void *dev_id
)
2283 struct net_device
*dev
= (struct net_device
*)dev_id
;
2284 struct stmmac_priv
*priv
= netdev_priv(dev
);
2286 if (unlikely(!dev
)) {
2287 pr_err("%s: invalid dev pointer\n", __func__
);
2291 /* To handle GMAC own interrupts */
2292 if (priv
->plat
->has_gmac
) {
2293 int status
= priv
->hw
->mac
->host_irq_status((void __iomem
*)
2296 if (unlikely(status
)) {
2297 /* For LPI we need to save the tx status */
2298 if (status
& CORE_IRQ_TX_PATH_IN_LPI_MODE
)
2299 priv
->tx_path_in_lpi_mode
= true;
2300 if (status
& CORE_IRQ_TX_PATH_EXIT_LPI_MODE
)
2301 priv
->tx_path_in_lpi_mode
= false;
2305 /* To handle DMA interrupts */
2306 stmmac_dma_interrupt(priv
);
2311 #ifdef CONFIG_NET_POLL_CONTROLLER
2312 /* Polling receive - used by NETCONSOLE and other diagnostic tools
2313 * to allow network I/O with interrupts disabled.
2315 static void stmmac_poll_controller(struct net_device
*dev
)
2317 disable_irq(dev
->irq
);
2318 stmmac_interrupt(dev
->irq
, dev
);
2319 enable_irq(dev
->irq
);
2324 * stmmac_ioctl - Entry point for the Ioctl
2325 * @dev: Device pointer.
2326 * @rq: An IOCTL specefic structure, that can contain a pointer to
2327 * a proprietary structure used to pass information to the driver.
2328 * @cmd: IOCTL command
2330 * Currently it supports the phy_mii_ioctl(...) and HW time stamping.
2332 static int stmmac_ioctl(struct net_device
*dev
, struct ifreq
*rq
, int cmd
)
2334 struct stmmac_priv
*priv
= netdev_priv(dev
);
2335 int ret
= -EOPNOTSUPP
;
2337 if (!netif_running(dev
))
2346 ret
= phy_mii_ioctl(priv
->phydev
, rq
, cmd
);
2349 ret
= stmmac_hwtstamp_ioctl(dev
, rq
);
2358 #ifdef CONFIG_STMMAC_DEBUG_FS
2359 static struct dentry
*stmmac_fs_dir
;
2360 static struct dentry
*stmmac_rings_status
;
2361 static struct dentry
*stmmac_dma_cap
;
2363 static void sysfs_display_ring(void *head
, int size
, int extend_desc
,
2364 struct seq_file
*seq
)
2367 struct dma_extended_desc
*ep
= (struct dma_extended_desc
*)head
;
2368 struct dma_desc
*p
= (struct dma_desc
*)head
;
2370 for (i
= 0; i
< size
; i
++) {
2374 seq_printf(seq
, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
2375 i
, (unsigned int)virt_to_phys(ep
),
2376 (unsigned int)x
, (unsigned int)(x
>> 32),
2377 ep
->basic
.des2
, ep
->basic
.des3
);
2381 seq_printf(seq
, "%d [0x%x]: 0x%x 0x%x 0x%x 0x%x\n",
2382 i
, (unsigned int)virt_to_phys(ep
),
2383 (unsigned int)x
, (unsigned int)(x
>> 32),
2387 seq_printf(seq
, "\n");
2391 static int stmmac_sysfs_ring_read(struct seq_file
*seq
, void *v
)
2393 struct net_device
*dev
= seq
->private;
2394 struct stmmac_priv
*priv
= netdev_priv(dev
);
2395 unsigned int txsize
= priv
->dma_tx_size
;
2396 unsigned int rxsize
= priv
->dma_rx_size
;
2398 if (priv
->extend_desc
) {
2399 seq_printf(seq
, "Extended RX descriptor ring:\n");
2400 sysfs_display_ring((void *)priv
->dma_erx
, rxsize
, 1, seq
);
2401 seq_printf(seq
, "Extended TX descriptor ring:\n");
2402 sysfs_display_ring((void *)priv
->dma_etx
, txsize
, 1, seq
);
2404 seq_printf(seq
, "RX descriptor ring:\n");
2405 sysfs_display_ring((void *)priv
->dma_rx
, rxsize
, 0, seq
);
2406 seq_printf(seq
, "TX descriptor ring:\n");
2407 sysfs_display_ring((void *)priv
->dma_tx
, txsize
, 0, seq
);
2413 static int stmmac_sysfs_ring_open(struct inode
*inode
, struct file
*file
)
2415 return single_open(file
, stmmac_sysfs_ring_read
, inode
->i_private
);
2418 static const struct file_operations stmmac_rings_status_fops
= {
2419 .owner
= THIS_MODULE
,
2420 .open
= stmmac_sysfs_ring_open
,
2422 .llseek
= seq_lseek
,
2423 .release
= single_release
,
2426 static int stmmac_sysfs_dma_cap_read(struct seq_file
*seq
, void *v
)
2428 struct net_device
*dev
= seq
->private;
2429 struct stmmac_priv
*priv
= netdev_priv(dev
);
2431 if (!priv
->hw_cap_support
) {
2432 seq_printf(seq
, "DMA HW features not supported\n");
2436 seq_printf(seq
, "==============================\n");
2437 seq_printf(seq
, "\tDMA HW features\n");
2438 seq_printf(seq
, "==============================\n");
2440 seq_printf(seq
, "\t10/100 Mbps %s\n",
2441 (priv
->dma_cap
.mbps_10_100
) ? "Y" : "N");
2442 seq_printf(seq
, "\t1000 Mbps %s\n",
2443 (priv
->dma_cap
.mbps_1000
) ? "Y" : "N");
2444 seq_printf(seq
, "\tHalf duple %s\n",
2445 (priv
->dma_cap
.half_duplex
) ? "Y" : "N");
2446 seq_printf(seq
, "\tHash Filter: %s\n",
2447 (priv
->dma_cap
.hash_filter
) ? "Y" : "N");
2448 seq_printf(seq
, "\tMultiple MAC address registers: %s\n",
2449 (priv
->dma_cap
.multi_addr
) ? "Y" : "N");
2450 seq_printf(seq
, "\tPCS (TBI/SGMII/RTBI PHY interfatces): %s\n",
2451 (priv
->dma_cap
.pcs
) ? "Y" : "N");
2452 seq_printf(seq
, "\tSMA (MDIO) Interface: %s\n",
2453 (priv
->dma_cap
.sma_mdio
) ? "Y" : "N");
2454 seq_printf(seq
, "\tPMT Remote wake up: %s\n",
2455 (priv
->dma_cap
.pmt_remote_wake_up
) ? "Y" : "N");
2456 seq_printf(seq
, "\tPMT Magic Frame: %s\n",
2457 (priv
->dma_cap
.pmt_magic_frame
) ? "Y" : "N");
2458 seq_printf(seq
, "\tRMON module: %s\n",
2459 (priv
->dma_cap
.rmon
) ? "Y" : "N");
2460 seq_printf(seq
, "\tIEEE 1588-2002 Time Stamp: %s\n",
2461 (priv
->dma_cap
.time_stamp
) ? "Y" : "N");
2462 seq_printf(seq
, "\tIEEE 1588-2008 Advanced Time Stamp:%s\n",
2463 (priv
->dma_cap
.atime_stamp
) ? "Y" : "N");
2464 seq_printf(seq
, "\t802.3az - Energy-Efficient Ethernet (EEE) %s\n",
2465 (priv
->dma_cap
.eee
) ? "Y" : "N");
2466 seq_printf(seq
, "\tAV features: %s\n", (priv
->dma_cap
.av
) ? "Y" : "N");
2467 seq_printf(seq
, "\tChecksum Offload in TX: %s\n",
2468 (priv
->dma_cap
.tx_coe
) ? "Y" : "N");
2469 seq_printf(seq
, "\tIP Checksum Offload (type1) in RX: %s\n",
2470 (priv
->dma_cap
.rx_coe_type1
) ? "Y" : "N");
2471 seq_printf(seq
, "\tIP Checksum Offload (type2) in RX: %s\n",
2472 (priv
->dma_cap
.rx_coe_type2
) ? "Y" : "N");
2473 seq_printf(seq
, "\tRXFIFO > 2048bytes: %s\n",
2474 (priv
->dma_cap
.rxfifo_over_2048
) ? "Y" : "N");
2475 seq_printf(seq
, "\tNumber of Additional RX channel: %d\n",
2476 priv
->dma_cap
.number_rx_channel
);
2477 seq_printf(seq
, "\tNumber of Additional TX channel: %d\n",
2478 priv
->dma_cap
.number_tx_channel
);
2479 seq_printf(seq
, "\tEnhanced descriptors: %s\n",
2480 (priv
->dma_cap
.enh_desc
) ? "Y" : "N");
2485 static int stmmac_sysfs_dma_cap_open(struct inode
*inode
, struct file
*file
)
2487 return single_open(file
, stmmac_sysfs_dma_cap_read
, inode
->i_private
);
2490 static const struct file_operations stmmac_dma_cap_fops
= {
2491 .owner
= THIS_MODULE
,
2492 .open
= stmmac_sysfs_dma_cap_open
,
2494 .llseek
= seq_lseek
,
2495 .release
= single_release
,
2498 static int stmmac_init_fs(struct net_device
*dev
)
2500 /* Create debugfs entries */
2501 stmmac_fs_dir
= debugfs_create_dir(STMMAC_RESOURCE_NAME
, NULL
);
2503 if (!stmmac_fs_dir
|| IS_ERR(stmmac_fs_dir
)) {
2504 pr_err("ERROR %s, debugfs create directory failed\n",
2505 STMMAC_RESOURCE_NAME
);
2510 /* Entry to report DMA RX/TX rings */
2511 stmmac_rings_status
= debugfs_create_file("descriptors_status",
2512 S_IRUGO
, stmmac_fs_dir
, dev
,
2513 &stmmac_rings_status_fops
);
2515 if (!stmmac_rings_status
|| IS_ERR(stmmac_rings_status
)) {
2516 pr_info("ERROR creating stmmac ring debugfs file\n");
2517 debugfs_remove(stmmac_fs_dir
);
2522 /* Entry to report the DMA HW features */
2523 stmmac_dma_cap
= debugfs_create_file("dma_cap", S_IRUGO
, stmmac_fs_dir
,
2524 dev
, &stmmac_dma_cap_fops
);
2526 if (!stmmac_dma_cap
|| IS_ERR(stmmac_dma_cap
)) {
2527 pr_info("ERROR creating stmmac MMC debugfs file\n");
2528 debugfs_remove(stmmac_rings_status
);
2529 debugfs_remove(stmmac_fs_dir
);
2537 static void stmmac_exit_fs(void)
2539 debugfs_remove(stmmac_rings_status
);
2540 debugfs_remove(stmmac_dma_cap
);
2541 debugfs_remove(stmmac_fs_dir
);
2543 #endif /* CONFIG_STMMAC_DEBUG_FS */
2545 static const struct net_device_ops stmmac_netdev_ops
= {
2546 .ndo_open
= stmmac_open
,
2547 .ndo_start_xmit
= stmmac_xmit
,
2548 .ndo_stop
= stmmac_release
,
2549 .ndo_change_mtu
= stmmac_change_mtu
,
2550 .ndo_fix_features
= stmmac_fix_features
,
2551 .ndo_set_rx_mode
= stmmac_set_rx_mode
,
2552 .ndo_tx_timeout
= stmmac_tx_timeout
,
2553 .ndo_do_ioctl
= stmmac_ioctl
,
2554 .ndo_set_config
= stmmac_config
,
2555 #ifdef CONFIG_NET_POLL_CONTROLLER
2556 .ndo_poll_controller
= stmmac_poll_controller
,
2558 .ndo_set_mac_address
= eth_mac_addr
,
2562 * stmmac_hw_init - Init the MAC device
2563 * @priv: driver private structure
2564 * Description: this function detects which MAC device
2565 * (GMAC/MAC10-100) has to attached, checks the HW capability
2566 * (if supported) and sets the driver's features (for example
2567 * to use the ring or chaine mode or support the normal/enh
2568 * descriptor structure).
2570 static int stmmac_hw_init(struct stmmac_priv
*priv
)
2573 struct mac_device_info
*mac
;
2575 /* Identify the MAC HW device */
2576 if (priv
->plat
->has_gmac
) {
2577 priv
->dev
->priv_flags
|= IFF_UNICAST_FLT
;
2578 mac
= dwmac1000_setup(priv
->ioaddr
);
2580 mac
= dwmac100_setup(priv
->ioaddr
);
2587 /* Get and dump the chip ID */
2588 priv
->synopsys_id
= stmmac_get_synopsys_id(priv
);
2590 /* To use the chained or ring mode */
2592 priv
->hw
->chain
= &chain_mode_ops
;
2593 pr_info(" Chain mode enabled\n");
2594 priv
->mode
= STMMAC_CHAIN_MODE
;
2596 priv
->hw
->ring
= &ring_mode_ops
;
2597 pr_info(" Ring mode enabled\n");
2598 priv
->mode
= STMMAC_RING_MODE
;
2601 /* Get the HW capability (new GMAC newer than 3.50a) */
2602 priv
->hw_cap_support
= stmmac_get_hw_features(priv
);
2603 if (priv
->hw_cap_support
) {
2604 pr_info(" DMA HW capability register supported");
2606 /* We can override some gmac/dma configuration fields: e.g.
2607 * enh_desc, tx_coe (e.g. that are passed through the
2608 * platform) with the values from the HW capability
2609 * register (if supported).
2611 priv
->plat
->enh_desc
= priv
->dma_cap
.enh_desc
;
2612 priv
->plat
->pmt
= priv
->dma_cap
.pmt_remote_wake_up
;
2614 priv
->plat
->tx_coe
= priv
->dma_cap
.tx_coe
;
2616 if (priv
->dma_cap
.rx_coe_type2
)
2617 priv
->plat
->rx_coe
= STMMAC_RX_COE_TYPE2
;
2618 else if (priv
->dma_cap
.rx_coe_type1
)
2619 priv
->plat
->rx_coe
= STMMAC_RX_COE_TYPE1
;
2622 pr_info(" No HW DMA feature register supported");
2624 /* To use alternate (extended) or normal descriptor structures */
2625 stmmac_selec_desc_mode(priv
);
2627 ret
= priv
->hw
->mac
->rx_ipc(priv
->ioaddr
);
2629 pr_warn(" RX IPC Checksum Offload not configured.\n");
2630 priv
->plat
->rx_coe
= STMMAC_RX_COE_NONE
;
2633 if (priv
->plat
->rx_coe
)
2634 pr_info(" RX Checksum Offload Engine supported (type %d)\n",
2635 priv
->plat
->rx_coe
);
2636 if (priv
->plat
->tx_coe
)
2637 pr_info(" TX Checksum insertion supported\n");
2639 if (priv
->plat
->pmt
) {
2640 pr_info(" Wake-Up On Lan supported\n");
2641 device_set_wakeup_capable(priv
->device
, 1);
2649 * @device: device pointer
2650 * @plat_dat: platform data pointer
2651 * @addr: iobase memory address
2652 * Description: this is the main probe function used to
2653 * call the alloc_etherdev, allocate the priv structure.
2655 struct stmmac_priv
*stmmac_dvr_probe(struct device
*device
,
2656 struct plat_stmmacenet_data
*plat_dat
,
2660 struct net_device
*ndev
= NULL
;
2661 struct stmmac_priv
*priv
;
2663 ndev
= alloc_etherdev(sizeof(struct stmmac_priv
));
2667 SET_NETDEV_DEV(ndev
, device
);
2669 priv
= netdev_priv(ndev
);
2670 priv
->device
= device
;
2675 stmmac_set_ethtool_ops(ndev
);
2676 priv
->pause
= pause
;
2677 priv
->plat
= plat_dat
;
2678 priv
->ioaddr
= addr
;
2679 priv
->dev
->base_addr
= (unsigned long)addr
;
2681 /* Verify driver arguments */
2682 stmmac_verify_args();
2684 /* Override with kernel parameters if supplied XXX CRS XXX
2685 * this needs to have multiple instances
2687 if ((phyaddr
>= 0) && (phyaddr
<= 31))
2688 priv
->plat
->phy_addr
= phyaddr
;
2690 /* Init MAC and get the capabilities */
2691 ret
= stmmac_hw_init(priv
);
2693 goto error_free_netdev
;
2695 ndev
->netdev_ops
= &stmmac_netdev_ops
;
2697 ndev
->hw_features
= NETIF_F_SG
| NETIF_F_IP_CSUM
| NETIF_F_IPV6_CSUM
|
2699 ndev
->features
|= ndev
->hw_features
| NETIF_F_HIGHDMA
;
2700 ndev
->watchdog_timeo
= msecs_to_jiffies(watchdog
);
2701 #ifdef STMMAC_VLAN_TAG_USED
2702 /* Both mac100 and gmac support receive VLAN tag detection */
2703 ndev
->features
|= NETIF_F_HW_VLAN_CTAG_RX
;
2705 priv
->msg_enable
= netif_msg_init(debug
, default_msg_level
);
2708 priv
->flow_ctrl
= FLOW_AUTO
; /* RX/TX pause on */
2710 /* Rx Watchdog is available in the COREs newer than the 3.40.
2711 * In some case, for example on bugged HW this feature
2712 * has to be disable and this can be done by passing the
2713 * riwt_off field from the platform.
2715 if ((priv
->synopsys_id
>= DWMAC_CORE_3_50
) && (!priv
->plat
->riwt_off
)) {
2717 pr_info(" Enable RX Mitigation via HW Watchdog Timer\n");
2720 netif_napi_add(ndev
, &priv
->napi
, stmmac_poll
, 64);
2722 spin_lock_init(&priv
->lock
);
2723 spin_lock_init(&priv
->tx_lock
);
2725 ret
= register_netdev(ndev
);
2727 pr_err("%s: ERROR %i registering the device\n", __func__
, ret
);
2728 goto error_netdev_register
;
2731 priv
->stmmac_clk
= clk_get(priv
->device
, STMMAC_RESOURCE_NAME
);
2732 if (IS_ERR(priv
->stmmac_clk
)) {
2733 pr_warn("%s: warning: cannot get CSR clock\n", __func__
);
2737 /* If a specific clk_csr value is passed from the platform
2738 * this means that the CSR Clock Range selection cannot be
2739 * changed at run-time and it is fixed. Viceversa the driver'll try to
2740 * set the MDC clock dynamically according to the csr actual
2743 if (!priv
->plat
->clk_csr
)
2744 stmmac_clk_csr_set(priv
);
2746 priv
->clk_csr
= priv
->plat
->clk_csr
;
2748 stmmac_check_pcs_mode(priv
);
2750 if (priv
->pcs
!= STMMAC_PCS_RGMII
&& priv
->pcs
!= STMMAC_PCS_TBI
&&
2751 priv
->pcs
!= STMMAC_PCS_RTBI
) {
2752 /* MDIO bus Registration */
2753 ret
= stmmac_mdio_register(ndev
);
2755 pr_debug("%s: MDIO bus (id: %d) registration failed",
2756 __func__
, priv
->plat
->bus_id
);
2757 goto error_mdio_register
;
2763 error_mdio_register
:
2764 clk_put(priv
->stmmac_clk
);
2766 unregister_netdev(ndev
);
2767 error_netdev_register
:
2768 netif_napi_del(&priv
->napi
);
2777 * @ndev: net device pointer
2778 * Description: this function resets the TX/RX processes, disables the MAC RX/TX
2779 * changes the link status, releases the DMA descriptor rings.
2781 int stmmac_dvr_remove(struct net_device
*ndev
)
2783 struct stmmac_priv
*priv
= netdev_priv(ndev
);
2785 pr_info("%s:\n\tremoving driver", __func__
);
2787 priv
->hw
->dma
->stop_rx(priv
->ioaddr
);
2788 priv
->hw
->dma
->stop_tx(priv
->ioaddr
);
2790 stmmac_set_mac(priv
->ioaddr
, false);
2791 if (priv
->pcs
!= STMMAC_PCS_RGMII
&& priv
->pcs
!= STMMAC_PCS_TBI
&&
2792 priv
->pcs
!= STMMAC_PCS_RTBI
)
2793 stmmac_mdio_unregister(ndev
);
2794 netif_carrier_off(ndev
);
2795 unregister_netdev(ndev
);
2802 int stmmac_suspend(struct net_device
*ndev
)
2804 struct stmmac_priv
*priv
= netdev_priv(ndev
);
2805 unsigned long flags
;
2807 if (!ndev
|| !netif_running(ndev
))
2811 phy_stop(priv
->phydev
);
2813 spin_lock_irqsave(&priv
->lock
, flags
);
2815 netif_device_detach(ndev
);
2816 netif_stop_queue(ndev
);
2818 napi_disable(&priv
->napi
);
2820 /* Stop TX/RX DMA */
2821 priv
->hw
->dma
->stop_tx(priv
->ioaddr
);
2822 priv
->hw
->dma
->stop_rx(priv
->ioaddr
);
2824 stmmac_clear_descriptors(priv
);
2826 /* Enable Power down mode by programming the PMT regs */
2827 if (device_may_wakeup(priv
->device
))
2828 priv
->hw
->mac
->pmt(priv
->ioaddr
, priv
->wolopts
);
2830 stmmac_set_mac(priv
->ioaddr
, false);
2831 /* Disable clock in case of PWM is off */
2832 clk_disable_unprepare(priv
->stmmac_clk
);
2834 spin_unlock_irqrestore(&priv
->lock
, flags
);
2838 int stmmac_resume(struct net_device
*ndev
)
2840 struct stmmac_priv
*priv
= netdev_priv(ndev
);
2841 unsigned long flags
;
2843 if (!netif_running(ndev
))
2846 spin_lock_irqsave(&priv
->lock
, flags
);
2848 /* Power Down bit, into the PM register, is cleared
2849 * automatically as soon as a magic packet or a Wake-up frame
2850 * is received. Anyway, it's better to manually clear
2851 * this bit because it can generate problems while resuming
2852 * from another devices (e.g. serial console).
2854 if (device_may_wakeup(priv
->device
))
2855 priv
->hw
->mac
->pmt(priv
->ioaddr
, 0);
2857 /* enable the clk prevously disabled */
2858 clk_prepare_enable(priv
->stmmac_clk
);
2860 netif_device_attach(ndev
);
2862 /* Enable the MAC and DMA */
2863 stmmac_set_mac(priv
->ioaddr
, true);
2864 priv
->hw
->dma
->start_tx(priv
->ioaddr
);
2865 priv
->hw
->dma
->start_rx(priv
->ioaddr
);
2867 napi_enable(&priv
->napi
);
2869 netif_start_queue(ndev
);
2871 spin_unlock_irqrestore(&priv
->lock
, flags
);
2874 phy_start(priv
->phydev
);
2879 int stmmac_freeze(struct net_device
*ndev
)
2881 if (!ndev
|| !netif_running(ndev
))
2884 return stmmac_release(ndev
);
2887 int stmmac_restore(struct net_device
*ndev
)
2889 if (!ndev
|| !netif_running(ndev
))
2892 return stmmac_open(ndev
);
2894 #endif /* CONFIG_PM */
2896 /* Driver can be configured w/ and w/ both PCI and Platf drivers
2897 * depending on the configuration selected.
2899 static int __init
stmmac_init(void)
2903 ret
= stmmac_register_platform();
2906 ret
= stmmac_register_pci();
2911 stmmac_unregister_platform();
2913 pr_err("stmmac: driver registration failed\n");
2917 static void __exit
stmmac_exit(void)
2919 stmmac_unregister_platform();
2920 stmmac_unregister_pci();
2923 module_init(stmmac_init
);
2924 module_exit(stmmac_exit
);
2927 static int __init
stmmac_cmdline_opt(char *str
)
2933 while ((opt
= strsep(&str
, ",")) != NULL
) {
2934 if (!strncmp(opt
, "debug:", 6)) {
2935 if (kstrtoint(opt
+ 6, 0, &debug
))
2937 } else if (!strncmp(opt
, "phyaddr:", 8)) {
2938 if (kstrtoint(opt
+ 8, 0, &phyaddr
))
2940 } else if (!strncmp(opt
, "dma_txsize:", 11)) {
2941 if (kstrtoint(opt
+ 11, 0, &dma_txsize
))
2943 } else if (!strncmp(opt
, "dma_rxsize:", 11)) {
2944 if (kstrtoint(opt
+ 11, 0, &dma_rxsize
))
2946 } else if (!strncmp(opt
, "buf_sz:", 7)) {
2947 if (kstrtoint(opt
+ 7, 0, &buf_sz
))
2949 } else if (!strncmp(opt
, "tc:", 3)) {
2950 if (kstrtoint(opt
+ 3, 0, &tc
))
2952 } else if (!strncmp(opt
, "watchdog:", 9)) {
2953 if (kstrtoint(opt
+ 9, 0, &watchdog
))
2955 } else if (!strncmp(opt
, "flow_ctrl:", 10)) {
2956 if (kstrtoint(opt
+ 10, 0, &flow_ctrl
))
2958 } else if (!strncmp(opt
, "pause:", 6)) {
2959 if (kstrtoint(opt
+ 6, 0, &pause
))
2961 } else if (!strncmp(opt
, "eee_timer:", 10)) {
2962 if (kstrtoint(opt
+ 10, 0, &eee_timer
))
2964 } else if (!strncmp(opt
, "chain_mode:", 11)) {
2965 if (kstrtoint(opt
+ 11, 0, &chain_mode
))
2972 pr_err("%s: ERROR broken module parameter conversion", __func__
);
2976 __setup("stmmaceth=", stmmac_cmdline_opt
);
2979 MODULE_DESCRIPTION("STMMAC 10/100/1000 Ethernet device driver");
2980 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>");
2981 MODULE_LICENSE("GPL");