1 /*******************************************************************************
3 Intel(R) Gigabit Ethernet Linux driver
4 Copyright(c) 2007 Intel Corporation.
6 This program is free software; you can redistribute it and/or modify it
7 under the terms and conditions of the GNU General Public License,
8 version 2, as published by the Free Software Foundation.
10 This program is distributed in the hope it will be useful, but WITHOUT
11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
15 You should have received a copy of the GNU General Public License along with
16 this program; if not, write to the Free Software Foundation, Inc.,
17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
19 The full GNU General Public License is included in this distribution in
20 the file called "COPYING".
23 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
24 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
26 *******************************************************************************/
28 #include <linux/module.h>
29 #include <linux/types.h>
30 #include <linux/init.h>
31 #include <linux/vmalloc.h>
32 #include <linux/pagemap.h>
33 #include <linux/netdevice.h>
34 #include <linux/ipv6.h>
35 #include <net/checksum.h>
36 #include <net/ip6_checksum.h>
37 #include <linux/mii.h>
38 #include <linux/ethtool.h>
39 #include <linux/if_vlan.h>
40 #include <linux/pci.h>
41 #include <linux/pci-aspm.h>
42 #include <linux/delay.h>
43 #include <linux/interrupt.h>
44 #include <linux/if_ether.h>
46 #include <linux/dca.h>
50 #define DRV_VERSION "1.2.45-k2"
51 char igb_driver_name
[] = "igb";
52 char igb_driver_version
[] = DRV_VERSION
;
53 static const char igb_driver_string
[] =
54 "Intel(R) Gigabit Ethernet Network Driver";
55 static const char igb_copyright
[] = "Copyright (c) 2008 Intel Corporation.";
57 static const struct e1000_info
*igb_info_tbl
[] = {
58 [board_82575
] = &e1000_82575_info
,
61 static struct pci_device_id igb_pci_tbl
[] = {
62 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576
), board_82575
},
63 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_FIBER
), board_82575
},
64 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82576_SERDES
), board_82575
},
65 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82575EB_COPPER
), board_82575
},
66 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82575EB_FIBER_SERDES
), board_82575
},
67 { PCI_VDEVICE(INTEL
, E1000_DEV_ID_82575GB_QUAD_COPPER
), board_82575
},
68 /* required last entry */
72 MODULE_DEVICE_TABLE(pci
, igb_pci_tbl
);
74 void igb_reset(struct igb_adapter
*);
75 static int igb_setup_all_tx_resources(struct igb_adapter
*);
76 static int igb_setup_all_rx_resources(struct igb_adapter
*);
77 static void igb_free_all_tx_resources(struct igb_adapter
*);
78 static void igb_free_all_rx_resources(struct igb_adapter
*);
79 static void igb_free_tx_resources(struct igb_ring
*);
80 static void igb_free_rx_resources(struct igb_ring
*);
81 void igb_update_stats(struct igb_adapter
*);
82 static int igb_probe(struct pci_dev
*, const struct pci_device_id
*);
83 static void __devexit
igb_remove(struct pci_dev
*pdev
);
84 static int igb_sw_init(struct igb_adapter
*);
85 static int igb_open(struct net_device
*);
86 static int igb_close(struct net_device
*);
87 static void igb_configure_tx(struct igb_adapter
*);
88 static void igb_configure_rx(struct igb_adapter
*);
89 static void igb_setup_rctl(struct igb_adapter
*);
90 static void igb_clean_all_tx_rings(struct igb_adapter
*);
91 static void igb_clean_all_rx_rings(struct igb_adapter
*);
92 static void igb_clean_tx_ring(struct igb_ring
*);
93 static void igb_clean_rx_ring(struct igb_ring
*);
94 static void igb_set_multi(struct net_device
*);
95 static void igb_update_phy_info(unsigned long);
96 static void igb_watchdog(unsigned long);
97 static void igb_watchdog_task(struct work_struct
*);
98 static int igb_xmit_frame_ring_adv(struct sk_buff
*, struct net_device
*,
100 static int igb_xmit_frame_adv(struct sk_buff
*skb
, struct net_device
*);
101 static struct net_device_stats
*igb_get_stats(struct net_device
*);
102 static int igb_change_mtu(struct net_device
*, int);
103 static int igb_set_mac(struct net_device
*, void *);
104 static irqreturn_t
igb_intr(int irq
, void *);
105 static irqreturn_t
igb_intr_msi(int irq
, void *);
106 static irqreturn_t
igb_msix_other(int irq
, void *);
107 static irqreturn_t
igb_msix_rx(int irq
, void *);
108 static irqreturn_t
igb_msix_tx(int irq
, void *);
109 static int igb_clean_rx_ring_msix(struct napi_struct
*, int);
110 #ifdef CONFIG_IGB_DCA
111 static void igb_update_rx_dca(struct igb_ring
*);
112 static void igb_update_tx_dca(struct igb_ring
*);
113 static void igb_setup_dca(struct igb_adapter
*);
114 #endif /* CONFIG_IGB_DCA */
115 static bool igb_clean_tx_irq(struct igb_ring
*);
116 static int igb_poll(struct napi_struct
*, int);
117 static bool igb_clean_rx_irq_adv(struct igb_ring
*, int *, int);
118 static void igb_alloc_rx_buffers_adv(struct igb_ring
*, int);
119 #ifdef CONFIG_IGB_LRO
120 static int igb_get_skb_hdr(struct sk_buff
*skb
, void **, void **, u64
*, void *);
122 static int igb_ioctl(struct net_device
*, struct ifreq
*, int cmd
);
123 static void igb_tx_timeout(struct net_device
*);
124 static void igb_reset_task(struct work_struct
*);
125 static void igb_vlan_rx_register(struct net_device
*, struct vlan_group
*);
126 static void igb_vlan_rx_add_vid(struct net_device
*, u16
);
127 static void igb_vlan_rx_kill_vid(struct net_device
*, u16
);
128 static void igb_restore_vlan(struct igb_adapter
*);
130 static int igb_suspend(struct pci_dev
*, pm_message_t
);
132 static int igb_resume(struct pci_dev
*);
134 static void igb_shutdown(struct pci_dev
*);
135 #ifdef CONFIG_IGB_DCA
136 static int igb_notify_dca(struct notifier_block
*, unsigned long, void *);
137 static struct notifier_block dca_notifier
= {
138 .notifier_call
= igb_notify_dca
,
144 #ifdef CONFIG_NET_POLL_CONTROLLER
145 /* for netdump / net console */
146 static void igb_netpoll(struct net_device
*);
149 static pci_ers_result_t
igb_io_error_detected(struct pci_dev
*,
150 pci_channel_state_t
);
151 static pci_ers_result_t
igb_io_slot_reset(struct pci_dev
*);
152 static void igb_io_resume(struct pci_dev
*);
154 static struct pci_error_handlers igb_err_handler
= {
155 .error_detected
= igb_io_error_detected
,
156 .slot_reset
= igb_io_slot_reset
,
157 .resume
= igb_io_resume
,
161 static struct pci_driver igb_driver
= {
162 .name
= igb_driver_name
,
163 .id_table
= igb_pci_tbl
,
165 .remove
= __devexit_p(igb_remove
),
167 /* Power Managment Hooks */
168 .suspend
= igb_suspend
,
169 .resume
= igb_resume
,
171 .shutdown
= igb_shutdown
,
172 .err_handler
= &igb_err_handler
175 static int global_quad_port_a
; /* global quad port a indication */
177 MODULE_AUTHOR("Intel Corporation, <e1000-devel@lists.sourceforge.net>");
178 MODULE_DESCRIPTION("Intel(R) Gigabit Ethernet Network Driver");
179 MODULE_LICENSE("GPL");
180 MODULE_VERSION(DRV_VERSION
);
184 * igb_get_hw_dev_name - return device name string
185 * used by hardware layer to print debugging information
187 char *igb_get_hw_dev_name(struct e1000_hw
*hw
)
189 struct igb_adapter
*adapter
= hw
->back
;
190 return adapter
->netdev
->name
;
195 * igb_init_module - Driver Registration Routine
197 * igb_init_module is the first routine called when the driver is
198 * loaded. All it does is register with the PCI subsystem.
200 static int __init
igb_init_module(void)
203 printk(KERN_INFO
"%s - version %s\n",
204 igb_driver_string
, igb_driver_version
);
206 printk(KERN_INFO
"%s\n", igb_copyright
);
208 global_quad_port_a
= 0;
210 ret
= pci_register_driver(&igb_driver
);
211 #ifdef CONFIG_IGB_DCA
212 dca_register_notify(&dca_notifier
);
217 module_init(igb_init_module
);
220 * igb_exit_module - Driver Exit Cleanup Routine
222 * igb_exit_module is called just before the driver is removed
225 static void __exit
igb_exit_module(void)
227 #ifdef CONFIG_IGB_DCA
228 dca_unregister_notify(&dca_notifier
);
230 pci_unregister_driver(&igb_driver
);
233 module_exit(igb_exit_module
);
236 * igb_alloc_queues - Allocate memory for all rings
237 * @adapter: board private structure to initialize
239 * We allocate one ring per queue at run-time since we don't know the
240 * number of queues at compile-time.
242 static int igb_alloc_queues(struct igb_adapter
*adapter
)
246 adapter
->tx_ring
= kcalloc(adapter
->num_tx_queues
,
247 sizeof(struct igb_ring
), GFP_KERNEL
);
248 if (!adapter
->tx_ring
)
251 adapter
->rx_ring
= kcalloc(adapter
->num_rx_queues
,
252 sizeof(struct igb_ring
), GFP_KERNEL
);
253 if (!adapter
->rx_ring
) {
254 kfree(adapter
->tx_ring
);
258 adapter
->rx_ring
->buddy
= adapter
->tx_ring
;
260 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
261 struct igb_ring
*ring
= &(adapter
->tx_ring
[i
]);
262 ring
->adapter
= adapter
;
263 ring
->queue_index
= i
;
265 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
266 struct igb_ring
*ring
= &(adapter
->rx_ring
[i
]);
267 ring
->adapter
= adapter
;
268 ring
->queue_index
= i
;
269 ring
->itr_register
= E1000_ITR
;
271 /* set a default napi handler for each rx_ring */
272 netif_napi_add(adapter
->netdev
, &ring
->napi
, igb_poll
, 64);
277 static void igb_free_queues(struct igb_adapter
*adapter
)
281 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
282 netif_napi_del(&adapter
->rx_ring
[i
].napi
);
284 kfree(adapter
->tx_ring
);
285 kfree(adapter
->rx_ring
);
288 #define IGB_N0_QUEUE -1
289 static void igb_assign_vector(struct igb_adapter
*adapter
, int rx_queue
,
290 int tx_queue
, int msix_vector
)
293 struct e1000_hw
*hw
= &adapter
->hw
;
296 switch (hw
->mac
.type
) {
298 /* The 82575 assigns vectors using a bitmask, which matches the
299 bitmask for the EICR/EIMS/EIMC registers. To assign one
300 or more queues to a vector, we write the appropriate bits
301 into the MSIXBM register for that vector. */
302 if (rx_queue
> IGB_N0_QUEUE
) {
303 msixbm
= E1000_EICR_RX_QUEUE0
<< rx_queue
;
304 adapter
->rx_ring
[rx_queue
].eims_value
= msixbm
;
306 if (tx_queue
> IGB_N0_QUEUE
) {
307 msixbm
|= E1000_EICR_TX_QUEUE0
<< tx_queue
;
308 adapter
->tx_ring
[tx_queue
].eims_value
=
309 E1000_EICR_TX_QUEUE0
<< tx_queue
;
311 array_wr32(E1000_MSIXBM(0), msix_vector
, msixbm
);
314 /* The 82576 uses a table-based method for assigning vectors.
315 Each queue has a single entry in the table to which we write
316 a vector number along with a "valid" bit. Sadly, the layout
317 of the table is somewhat counterintuitive. */
318 if (rx_queue
> IGB_N0_QUEUE
) {
319 index
= (rx_queue
& 0x7);
320 ivar
= array_rd32(E1000_IVAR0
, index
);
322 /* vector goes into low byte of register */
323 ivar
= ivar
& 0xFFFFFF00;
324 ivar
|= msix_vector
| E1000_IVAR_VALID
;
326 /* vector goes into third byte of register */
327 ivar
= ivar
& 0xFF00FFFF;
328 ivar
|= (msix_vector
| E1000_IVAR_VALID
) << 16;
330 adapter
->rx_ring
[rx_queue
].eims_value
= 1 << msix_vector
;
331 array_wr32(E1000_IVAR0
, index
, ivar
);
333 if (tx_queue
> IGB_N0_QUEUE
) {
334 index
= (tx_queue
& 0x7);
335 ivar
= array_rd32(E1000_IVAR0
, index
);
337 /* vector goes into second byte of register */
338 ivar
= ivar
& 0xFFFF00FF;
339 ivar
|= (msix_vector
| E1000_IVAR_VALID
) << 8;
341 /* vector goes into high byte of register */
342 ivar
= ivar
& 0x00FFFFFF;
343 ivar
|= (msix_vector
| E1000_IVAR_VALID
) << 24;
345 adapter
->tx_ring
[tx_queue
].eims_value
= 1 << msix_vector
;
346 array_wr32(E1000_IVAR0
, index
, ivar
);
356 * igb_configure_msix - Configure MSI-X hardware
358 * igb_configure_msix sets up the hardware to properly
359 * generate MSI-X interrupts.
361 static void igb_configure_msix(struct igb_adapter
*adapter
)
365 struct e1000_hw
*hw
= &adapter
->hw
;
367 adapter
->eims_enable_mask
= 0;
368 if (hw
->mac
.type
== e1000_82576
)
369 /* Turn on MSI-X capability first, or our settings
370 * won't stick. And it will take days to debug. */
371 wr32(E1000_GPIE
, E1000_GPIE_MSIX_MODE
|
372 E1000_GPIE_PBA
| E1000_GPIE_EIAME
|
375 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
376 struct igb_ring
*tx_ring
= &adapter
->tx_ring
[i
];
377 igb_assign_vector(adapter
, IGB_N0_QUEUE
, i
, vector
++);
378 adapter
->eims_enable_mask
|= tx_ring
->eims_value
;
379 if (tx_ring
->itr_val
)
380 writel(tx_ring
->itr_val
,
381 hw
->hw_addr
+ tx_ring
->itr_register
);
383 writel(1, hw
->hw_addr
+ tx_ring
->itr_register
);
386 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
387 struct igb_ring
*rx_ring
= &adapter
->rx_ring
[i
];
388 rx_ring
->buddy
= NULL
;
389 igb_assign_vector(adapter
, i
, IGB_N0_QUEUE
, vector
++);
390 adapter
->eims_enable_mask
|= rx_ring
->eims_value
;
391 if (rx_ring
->itr_val
)
392 writel(rx_ring
->itr_val
,
393 hw
->hw_addr
+ rx_ring
->itr_register
);
395 writel(1, hw
->hw_addr
+ rx_ring
->itr_register
);
399 /* set vector for other causes, i.e. link changes */
400 switch (hw
->mac
.type
) {
402 array_wr32(E1000_MSIXBM(0), vector
++,
405 tmp
= rd32(E1000_CTRL_EXT
);
406 /* enable MSI-X PBA support*/
407 tmp
|= E1000_CTRL_EXT_PBA_CLR
;
409 /* Auto-Mask interrupts upon ICR read. */
410 tmp
|= E1000_CTRL_EXT_EIAME
;
411 tmp
|= E1000_CTRL_EXT_IRCA
;
413 wr32(E1000_CTRL_EXT
, tmp
);
414 adapter
->eims_enable_mask
|= E1000_EIMS_OTHER
;
415 adapter
->eims_other
= E1000_EIMS_OTHER
;
420 tmp
= (vector
++ | E1000_IVAR_VALID
) << 8;
421 wr32(E1000_IVAR_MISC
, tmp
);
423 adapter
->eims_enable_mask
= (1 << (vector
)) - 1;
424 adapter
->eims_other
= 1 << (vector
- 1);
427 /* do nothing, since nothing else supports MSI-X */
429 } /* switch (hw->mac.type) */
434 * igb_request_msix - Initialize MSI-X interrupts
436 * igb_request_msix allocates MSI-X vectors and requests interrupts from the
439 static int igb_request_msix(struct igb_adapter
*adapter
)
441 struct net_device
*netdev
= adapter
->netdev
;
442 int i
, err
= 0, vector
= 0;
446 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
447 struct igb_ring
*ring
= &(adapter
->tx_ring
[i
]);
448 sprintf(ring
->name
, "%s-tx%d", netdev
->name
, i
);
449 err
= request_irq(adapter
->msix_entries
[vector
].vector
,
450 &igb_msix_tx
, 0, ring
->name
,
451 &(adapter
->tx_ring
[i
]));
454 ring
->itr_register
= E1000_EITR(0) + (vector
<< 2);
455 ring
->itr_val
= 976; /* ~4000 ints/sec */
458 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
459 struct igb_ring
*ring
= &(adapter
->rx_ring
[i
]);
460 if (strlen(netdev
->name
) < (IFNAMSIZ
- 5))
461 sprintf(ring
->name
, "%s-rx%d", netdev
->name
, i
);
463 memcpy(ring
->name
, netdev
->name
, IFNAMSIZ
);
464 err
= request_irq(adapter
->msix_entries
[vector
].vector
,
465 &igb_msix_rx
, 0, ring
->name
,
466 &(adapter
->rx_ring
[i
]));
469 ring
->itr_register
= E1000_EITR(0) + (vector
<< 2);
470 ring
->itr_val
= adapter
->itr
;
471 /* overwrite the poll routine for MSIX, we've already done
473 ring
->napi
.poll
= &igb_clean_rx_ring_msix
;
477 err
= request_irq(adapter
->msix_entries
[vector
].vector
,
478 &igb_msix_other
, 0, netdev
->name
, netdev
);
482 igb_configure_msix(adapter
);
488 static void igb_reset_interrupt_capability(struct igb_adapter
*adapter
)
490 if (adapter
->msix_entries
) {
491 pci_disable_msix(adapter
->pdev
);
492 kfree(adapter
->msix_entries
);
493 adapter
->msix_entries
= NULL
;
494 } else if (adapter
->flags
& IGB_FLAG_HAS_MSI
)
495 pci_disable_msi(adapter
->pdev
);
501 * igb_set_interrupt_capability - set MSI or MSI-X if supported
503 * Attempt to configure interrupts using the best available
504 * capabilities of the hardware and kernel.
506 static void igb_set_interrupt_capability(struct igb_adapter
*adapter
)
511 numvecs
= adapter
->num_tx_queues
+ adapter
->num_rx_queues
+ 1;
512 adapter
->msix_entries
= kcalloc(numvecs
, sizeof(struct msix_entry
),
514 if (!adapter
->msix_entries
)
517 for (i
= 0; i
< numvecs
; i
++)
518 adapter
->msix_entries
[i
].entry
= i
;
520 err
= pci_enable_msix(adapter
->pdev
,
521 adapter
->msix_entries
,
526 igb_reset_interrupt_capability(adapter
);
528 /* If we can't do MSI-X, try MSI */
530 adapter
->num_rx_queues
= 1;
531 adapter
->num_tx_queues
= 1;
532 if (!pci_enable_msi(adapter
->pdev
))
533 adapter
->flags
|= IGB_FLAG_HAS_MSI
;
535 /* Notify the stack of the (possibly) reduced Tx Queue count. */
536 adapter
->netdev
->real_num_tx_queues
= adapter
->num_tx_queues
;
541 * igb_request_irq - initialize interrupts
543 * Attempts to configure interrupts using the best available
544 * capabilities of the hardware and kernel.
546 static int igb_request_irq(struct igb_adapter
*adapter
)
548 struct net_device
*netdev
= adapter
->netdev
;
549 struct e1000_hw
*hw
= &adapter
->hw
;
552 if (adapter
->msix_entries
) {
553 err
= igb_request_msix(adapter
);
556 /* fall back to MSI */
557 igb_reset_interrupt_capability(adapter
);
558 if (!pci_enable_msi(adapter
->pdev
))
559 adapter
->flags
|= IGB_FLAG_HAS_MSI
;
560 igb_free_all_tx_resources(adapter
);
561 igb_free_all_rx_resources(adapter
);
562 adapter
->num_rx_queues
= 1;
563 igb_alloc_queues(adapter
);
565 switch (hw
->mac
.type
) {
567 wr32(E1000_MSIXBM(0),
568 (E1000_EICR_RX_QUEUE0
| E1000_EIMS_OTHER
));
571 wr32(E1000_IVAR0
, E1000_IVAR_VALID
);
578 if (adapter
->flags
& IGB_FLAG_HAS_MSI
) {
579 err
= request_irq(adapter
->pdev
->irq
, &igb_intr_msi
, 0,
580 netdev
->name
, netdev
);
583 /* fall back to legacy interrupts */
584 igb_reset_interrupt_capability(adapter
);
585 adapter
->flags
&= ~IGB_FLAG_HAS_MSI
;
588 err
= request_irq(adapter
->pdev
->irq
, &igb_intr
, IRQF_SHARED
,
589 netdev
->name
, netdev
);
592 dev_err(&adapter
->pdev
->dev
, "Error %d getting interrupt\n",
599 static void igb_free_irq(struct igb_adapter
*adapter
)
601 struct net_device
*netdev
= adapter
->netdev
;
603 if (adapter
->msix_entries
) {
606 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
607 free_irq(adapter
->msix_entries
[vector
++].vector
,
608 &(adapter
->tx_ring
[i
]));
609 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
610 free_irq(adapter
->msix_entries
[vector
++].vector
,
611 &(adapter
->rx_ring
[i
]));
613 free_irq(adapter
->msix_entries
[vector
++].vector
, netdev
);
617 free_irq(adapter
->pdev
->irq
, netdev
);
621 * igb_irq_disable - Mask off interrupt generation on the NIC
622 * @adapter: board private structure
624 static void igb_irq_disable(struct igb_adapter
*adapter
)
626 struct e1000_hw
*hw
= &adapter
->hw
;
628 if (adapter
->msix_entries
) {
630 wr32(E1000_EIMC
, ~0);
637 synchronize_irq(adapter
->pdev
->irq
);
641 * igb_irq_enable - Enable default interrupt generation settings
642 * @adapter: board private structure
644 static void igb_irq_enable(struct igb_adapter
*adapter
)
646 struct e1000_hw
*hw
= &adapter
->hw
;
648 if (adapter
->msix_entries
) {
649 wr32(E1000_EIAC
, adapter
->eims_enable_mask
);
650 wr32(E1000_EIAM
, adapter
->eims_enable_mask
);
651 wr32(E1000_EIMS
, adapter
->eims_enable_mask
);
652 wr32(E1000_IMS
, E1000_IMS_LSC
);
654 wr32(E1000_IMS
, IMS_ENABLE_MASK
);
655 wr32(E1000_IAM
, IMS_ENABLE_MASK
);
659 static void igb_update_mng_vlan(struct igb_adapter
*adapter
)
661 struct net_device
*netdev
= adapter
->netdev
;
662 u16 vid
= adapter
->hw
.mng_cookie
.vlan_id
;
663 u16 old_vid
= adapter
->mng_vlan_id
;
664 if (adapter
->vlgrp
) {
665 if (!vlan_group_get_device(adapter
->vlgrp
, vid
)) {
666 if (adapter
->hw
.mng_cookie
.status
&
667 E1000_MNG_DHCP_COOKIE_STATUS_VLAN
) {
668 igb_vlan_rx_add_vid(netdev
, vid
);
669 adapter
->mng_vlan_id
= vid
;
671 adapter
->mng_vlan_id
= IGB_MNG_VLAN_NONE
;
673 if ((old_vid
!= (u16
)IGB_MNG_VLAN_NONE
) &&
675 !vlan_group_get_device(adapter
->vlgrp
, old_vid
))
676 igb_vlan_rx_kill_vid(netdev
, old_vid
);
678 adapter
->mng_vlan_id
= vid
;
683 * igb_release_hw_control - release control of the h/w to f/w
684 * @adapter: address of board private structure
686 * igb_release_hw_control resets CTRL_EXT:DRV_LOAD bit.
687 * For ASF and Pass Through versions of f/w this means that the
688 * driver is no longer loaded.
691 static void igb_release_hw_control(struct igb_adapter
*adapter
)
693 struct e1000_hw
*hw
= &adapter
->hw
;
696 /* Let firmware take over control of h/w */
697 ctrl_ext
= rd32(E1000_CTRL_EXT
);
699 ctrl_ext
& ~E1000_CTRL_EXT_DRV_LOAD
);
704 * igb_get_hw_control - get control of the h/w from f/w
705 * @adapter: address of board private structure
707 * igb_get_hw_control sets CTRL_EXT:DRV_LOAD bit.
708 * For ASF and Pass Through versions of f/w this means that
709 * the driver is loaded.
712 static void igb_get_hw_control(struct igb_adapter
*adapter
)
714 struct e1000_hw
*hw
= &adapter
->hw
;
717 /* Let firmware know the driver has taken over */
718 ctrl_ext
= rd32(E1000_CTRL_EXT
);
720 ctrl_ext
| E1000_CTRL_EXT_DRV_LOAD
);
724 * igb_configure - configure the hardware for RX and TX
725 * @adapter: private board structure
727 static void igb_configure(struct igb_adapter
*adapter
)
729 struct net_device
*netdev
= adapter
->netdev
;
732 igb_get_hw_control(adapter
);
733 igb_set_multi(netdev
);
735 igb_restore_vlan(adapter
);
737 igb_configure_tx(adapter
);
738 igb_setup_rctl(adapter
);
739 igb_configure_rx(adapter
);
741 igb_rx_fifo_flush_82575(&adapter
->hw
);
743 /* call IGB_DESC_UNUSED which always leaves
744 * at least 1 descriptor unused to make sure
745 * next_to_use != next_to_clean */
746 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
747 struct igb_ring
*ring
= &adapter
->rx_ring
[i
];
748 igb_alloc_rx_buffers_adv(ring
, IGB_DESC_UNUSED(ring
));
752 adapter
->tx_queue_len
= netdev
->tx_queue_len
;
757 * igb_up - Open the interface and prepare it to handle traffic
758 * @adapter: board private structure
761 int igb_up(struct igb_adapter
*adapter
)
763 struct e1000_hw
*hw
= &adapter
->hw
;
766 /* hardware has been reset, we need to reload some things */
767 igb_configure(adapter
);
769 clear_bit(__IGB_DOWN
, &adapter
->state
);
771 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
772 napi_enable(&adapter
->rx_ring
[i
].napi
);
773 if (adapter
->msix_entries
)
774 igb_configure_msix(adapter
);
776 /* Clear any pending interrupts. */
778 igb_irq_enable(adapter
);
780 /* Fire a link change interrupt to start the watchdog. */
781 wr32(E1000_ICS
, E1000_ICS_LSC
);
785 void igb_down(struct igb_adapter
*adapter
)
787 struct e1000_hw
*hw
= &adapter
->hw
;
788 struct net_device
*netdev
= adapter
->netdev
;
792 /* signal that we're down so the interrupt handler does not
793 * reschedule our watchdog timer */
794 set_bit(__IGB_DOWN
, &adapter
->state
);
796 /* disable receives in the hardware */
797 rctl
= rd32(E1000_RCTL
);
798 wr32(E1000_RCTL
, rctl
& ~E1000_RCTL_EN
);
799 /* flush and sleep below */
801 netif_tx_stop_all_queues(netdev
);
803 /* disable transmits in the hardware */
804 tctl
= rd32(E1000_TCTL
);
805 tctl
&= ~E1000_TCTL_EN
;
806 wr32(E1000_TCTL
, tctl
);
807 /* flush both disables and wait for them to finish */
811 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
812 napi_disable(&adapter
->rx_ring
[i
].napi
);
814 igb_irq_disable(adapter
);
816 del_timer_sync(&adapter
->watchdog_timer
);
817 del_timer_sync(&adapter
->phy_info_timer
);
819 netdev
->tx_queue_len
= adapter
->tx_queue_len
;
820 netif_carrier_off(netdev
);
821 adapter
->link_speed
= 0;
822 adapter
->link_duplex
= 0;
824 if (!pci_channel_offline(adapter
->pdev
))
826 igb_clean_all_tx_rings(adapter
);
827 igb_clean_all_rx_rings(adapter
);
830 void igb_reinit_locked(struct igb_adapter
*adapter
)
832 WARN_ON(in_interrupt());
833 while (test_and_set_bit(__IGB_RESETTING
, &adapter
->state
))
837 clear_bit(__IGB_RESETTING
, &adapter
->state
);
840 void igb_reset(struct igb_adapter
*adapter
)
842 struct e1000_hw
*hw
= &adapter
->hw
;
843 struct e1000_mac_info
*mac
= &hw
->mac
;
844 struct e1000_fc_info
*fc
= &hw
->fc
;
845 u32 pba
= 0, tx_space
, min_tx_space
, min_rx_space
;
848 /* Repartition Pba for greater than 9k mtu
849 * To take effect CTRL.RST is required.
851 if (mac
->type
!= e1000_82576
) {
858 if ((adapter
->max_frame_size
> ETH_FRAME_LEN
+ ETH_FCS_LEN
) &&
859 (mac
->type
< e1000_82576
)) {
860 /* adjust PBA for jumbo frames */
861 wr32(E1000_PBA
, pba
);
863 /* To maintain wire speed transmits, the Tx FIFO should be
864 * large enough to accommodate two full transmit packets,
865 * rounded up to the next 1KB and expressed in KB. Likewise,
866 * the Rx FIFO should be large enough to accommodate at least
867 * one full receive packet and is similarly rounded up and
868 * expressed in KB. */
869 pba
= rd32(E1000_PBA
);
870 /* upper 16 bits has Tx packet buffer allocation size in KB */
871 tx_space
= pba
>> 16;
872 /* lower 16 bits has Rx packet buffer allocation size in KB */
874 /* the tx fifo also stores 16 bytes of information about the tx
875 * but don't include ethernet FCS because hardware appends it */
876 min_tx_space
= (adapter
->max_frame_size
+
877 sizeof(struct e1000_tx_desc
) -
879 min_tx_space
= ALIGN(min_tx_space
, 1024);
881 /* software strips receive CRC, so leave room for it */
882 min_rx_space
= adapter
->max_frame_size
;
883 min_rx_space
= ALIGN(min_rx_space
, 1024);
886 /* If current Tx allocation is less than the min Tx FIFO size,
887 * and the min Tx FIFO size is less than the current Rx FIFO
888 * allocation, take space away from current Rx allocation */
889 if (tx_space
< min_tx_space
&&
890 ((min_tx_space
- tx_space
) < pba
)) {
891 pba
= pba
- (min_tx_space
- tx_space
);
893 /* if short on rx space, rx wins and must trump tx
895 if (pba
< min_rx_space
)
898 wr32(E1000_PBA
, pba
);
901 /* flow control settings */
902 /* The high water mark must be low enough to fit one full frame
903 * (or the size used for early receive) above it in the Rx FIFO.
904 * Set it to the lower of:
905 * - 90% of the Rx FIFO size, or
906 * - the full Rx FIFO size minus one full frame */
907 hwm
= min(((pba
<< 10) * 9 / 10),
908 ((pba
<< 10) - 2 * adapter
->max_frame_size
));
910 if (mac
->type
< e1000_82576
) {
911 fc
->high_water
= hwm
& 0xFFF8; /* 8-byte granularity */
912 fc
->low_water
= fc
->high_water
- 8;
914 fc
->high_water
= hwm
& 0xFFF0; /* 16-byte granularity */
915 fc
->low_water
= fc
->high_water
- 16;
917 fc
->pause_time
= 0xFFFF;
919 fc
->type
= fc
->original_type
;
921 /* Allow time for pending master requests to run */
922 adapter
->hw
.mac
.ops
.reset_hw(&adapter
->hw
);
925 if (adapter
->hw
.mac
.ops
.init_hw(&adapter
->hw
))
926 dev_err(&adapter
->pdev
->dev
, "Hardware Error\n");
928 igb_update_mng_vlan(adapter
);
930 /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
931 wr32(E1000_VET
, ETHERNET_IEEE_VLAN_TYPE
);
933 igb_reset_adaptive(&adapter
->hw
);
934 if (adapter
->hw
.phy
.ops
.get_phy_info
)
935 adapter
->hw
.phy
.ops
.get_phy_info(&adapter
->hw
);
939 * igb_is_need_ioport - determine if an adapter needs ioport resources or not
940 * @pdev: PCI device information struct
942 * Returns true if an adapter needs ioport resources
944 static int igb_is_need_ioport(struct pci_dev
*pdev
)
946 switch (pdev
->device
) {
947 /* Currently there are no adapters that need ioport resources */
954 * igb_probe - Device Initialization Routine
955 * @pdev: PCI device information struct
956 * @ent: entry in igb_pci_tbl
958 * Returns 0 on success, negative on failure
960 * igb_probe initializes an adapter identified by a pci_dev structure.
961 * The OS initialization, configuring of the adapter private structure,
962 * and a hardware reset occur.
964 static int __devinit
igb_probe(struct pci_dev
*pdev
,
965 const struct pci_device_id
*ent
)
967 struct net_device
*netdev
;
968 struct igb_adapter
*adapter
;
970 struct pci_dev
*us_dev
;
971 const struct e1000_info
*ei
= igb_info_tbl
[ent
->driver_data
];
972 unsigned long mmio_start
, mmio_len
;
973 int i
, err
, pci_using_dac
, pos
;
974 u16 eeprom_data
= 0, state
= 0;
975 u16 eeprom_apme_mask
= IGB_EEPROM_APME
;
977 int bars
, need_ioport
;
979 /* do not allocate ioport bars when not needed */
980 need_ioport
= igb_is_need_ioport(pdev
);
982 bars
= pci_select_bars(pdev
, IORESOURCE_MEM
| IORESOURCE_IO
);
983 err
= pci_enable_device(pdev
);
985 bars
= pci_select_bars(pdev
, IORESOURCE_MEM
);
986 err
= pci_enable_device_mem(pdev
);
992 err
= pci_set_dma_mask(pdev
, DMA_64BIT_MASK
);
994 err
= pci_set_consistent_dma_mask(pdev
, DMA_64BIT_MASK
);
998 err
= pci_set_dma_mask(pdev
, DMA_32BIT_MASK
);
1000 err
= pci_set_consistent_dma_mask(pdev
, DMA_32BIT_MASK
);
1002 dev_err(&pdev
->dev
, "No usable DMA "
1003 "configuration, aborting\n");
1009 /* 82575 requires that the pci-e link partner disable the L0s state */
1010 switch (pdev
->device
) {
1011 case E1000_DEV_ID_82575EB_COPPER
:
1012 case E1000_DEV_ID_82575EB_FIBER_SERDES
:
1013 case E1000_DEV_ID_82575GB_QUAD_COPPER
:
1014 us_dev
= pdev
->bus
->self
;
1015 pos
= pci_find_capability(us_dev
, PCI_CAP_ID_EXP
);
1017 pci_read_config_word(us_dev
, pos
+ PCI_EXP_LNKCTL
,
1019 state
&= ~PCIE_LINK_STATE_L0S
;
1020 pci_write_config_word(us_dev
, pos
+ PCI_EXP_LNKCTL
,
1022 printk(KERN_INFO
"Disabling ASPM L0s upstream switch "
1023 "port %x:%x.%x\n", us_dev
->bus
->number
,
1024 PCI_SLOT(us_dev
->devfn
),
1025 PCI_FUNC(us_dev
->devfn
));
1031 err
= pci_request_selected_regions(pdev
, bars
, igb_driver_name
);
1035 pci_set_master(pdev
);
1036 pci_save_state(pdev
);
1039 netdev
= alloc_etherdev_mq(sizeof(struct igb_adapter
), IGB_MAX_TX_QUEUES
);
1041 goto err_alloc_etherdev
;
1043 SET_NETDEV_DEV(netdev
, &pdev
->dev
);
1045 pci_set_drvdata(pdev
, netdev
);
1046 adapter
= netdev_priv(netdev
);
1047 adapter
->netdev
= netdev
;
1048 adapter
->pdev
= pdev
;
1051 adapter
->msg_enable
= NETIF_MSG_DRV
| NETIF_MSG_PROBE
;
1052 adapter
->bars
= bars
;
1053 adapter
->need_ioport
= need_ioport
;
1055 mmio_start
= pci_resource_start(pdev
, 0);
1056 mmio_len
= pci_resource_len(pdev
, 0);
1059 adapter
->hw
.hw_addr
= ioremap(mmio_start
, mmio_len
);
1060 if (!adapter
->hw
.hw_addr
)
1063 netdev
->open
= &igb_open
;
1064 netdev
->stop
= &igb_close
;
1065 netdev
->get_stats
= &igb_get_stats
;
1066 netdev
->set_multicast_list
= &igb_set_multi
;
1067 netdev
->set_mac_address
= &igb_set_mac
;
1068 netdev
->change_mtu
= &igb_change_mtu
;
1069 netdev
->do_ioctl
= &igb_ioctl
;
1070 igb_set_ethtool_ops(netdev
);
1071 netdev
->tx_timeout
= &igb_tx_timeout
;
1072 netdev
->watchdog_timeo
= 5 * HZ
;
1073 netdev
->vlan_rx_register
= igb_vlan_rx_register
;
1074 netdev
->vlan_rx_add_vid
= igb_vlan_rx_add_vid
;
1075 netdev
->vlan_rx_kill_vid
= igb_vlan_rx_kill_vid
;
1076 #ifdef CONFIG_NET_POLL_CONTROLLER
1077 netdev
->poll_controller
= igb_netpoll
;
1079 netdev
->hard_start_xmit
= &igb_xmit_frame_adv
;
1081 strncpy(netdev
->name
, pci_name(pdev
), sizeof(netdev
->name
) - 1);
1083 netdev
->mem_start
= mmio_start
;
1084 netdev
->mem_end
= mmio_start
+ mmio_len
;
1086 /* PCI config space info */
1087 hw
->vendor_id
= pdev
->vendor
;
1088 hw
->device_id
= pdev
->device
;
1089 hw
->revision_id
= pdev
->revision
;
1090 hw
->subsystem_vendor_id
= pdev
->subsystem_vendor
;
1091 hw
->subsystem_device_id
= pdev
->subsystem_device
;
1093 /* setup the private structure */
1095 /* Copy the default MAC, PHY and NVM function pointers */
1096 memcpy(&hw
->mac
.ops
, ei
->mac_ops
, sizeof(hw
->mac
.ops
));
1097 memcpy(&hw
->phy
.ops
, ei
->phy_ops
, sizeof(hw
->phy
.ops
));
1098 memcpy(&hw
->nvm
.ops
, ei
->nvm_ops
, sizeof(hw
->nvm
.ops
));
1099 /* Initialize skew-specific constants */
1100 err
= ei
->get_invariants(hw
);
1104 err
= igb_sw_init(adapter
);
1108 igb_get_bus_info_pcie(hw
);
1111 switch (hw
->mac
.type
) {
1114 adapter
->flags
|= IGB_FLAG_HAS_DCA
;
1115 adapter
->flags
|= IGB_FLAG_NEED_CTX_IDX
;
1121 hw
->phy
.autoneg_wait_to_complete
= false;
1122 hw
->mac
.adaptive_ifs
= true;
1124 /* Copper options */
1125 if (hw
->phy
.media_type
== e1000_media_type_copper
) {
1126 hw
->phy
.mdix
= AUTO_ALL_MODES
;
1127 hw
->phy
.disable_polarity_correction
= false;
1128 hw
->phy
.ms_type
= e1000_ms_hw_default
;
1131 if (igb_check_reset_block(hw
))
1132 dev_info(&pdev
->dev
,
1133 "PHY reset is blocked due to SOL/IDER session.\n");
1135 netdev
->features
= NETIF_F_SG
|
1137 NETIF_F_HW_VLAN_TX
|
1138 NETIF_F_HW_VLAN_RX
|
1139 NETIF_F_HW_VLAN_FILTER
;
1141 netdev
->features
|= NETIF_F_TSO
;
1142 netdev
->features
|= NETIF_F_TSO6
;
1144 #ifdef CONFIG_IGB_LRO
1145 netdev
->features
|= NETIF_F_LRO
;
1148 netdev
->vlan_features
|= NETIF_F_TSO
;
1149 netdev
->vlan_features
|= NETIF_F_TSO6
;
1150 netdev
->vlan_features
|= NETIF_F_HW_CSUM
;
1151 netdev
->vlan_features
|= NETIF_F_SG
;
1154 netdev
->features
|= NETIF_F_HIGHDMA
;
1156 netdev
->features
|= NETIF_F_LLTX
;
1157 adapter
->en_mng_pt
= igb_enable_mng_pass_thru(&adapter
->hw
);
1159 /* before reading the NVM, reset the controller to put the device in a
1160 * known good starting state */
1161 hw
->mac
.ops
.reset_hw(hw
);
1163 /* make sure the NVM is good */
1164 if (igb_validate_nvm_checksum(hw
) < 0) {
1165 dev_err(&pdev
->dev
, "The NVM Checksum Is Not Valid\n");
1170 /* copy the MAC address out of the NVM */
1171 if (hw
->mac
.ops
.read_mac_addr(hw
))
1172 dev_err(&pdev
->dev
, "NVM Read Error\n");
1174 memcpy(netdev
->dev_addr
, hw
->mac
.addr
, netdev
->addr_len
);
1175 memcpy(netdev
->perm_addr
, hw
->mac
.addr
, netdev
->addr_len
);
1177 if (!is_valid_ether_addr(netdev
->perm_addr
)) {
1178 dev_err(&pdev
->dev
, "Invalid MAC Address\n");
1183 init_timer(&adapter
->watchdog_timer
);
1184 adapter
->watchdog_timer
.function
= &igb_watchdog
;
1185 adapter
->watchdog_timer
.data
= (unsigned long) adapter
;
1187 init_timer(&adapter
->phy_info_timer
);
1188 adapter
->phy_info_timer
.function
= &igb_update_phy_info
;
1189 adapter
->phy_info_timer
.data
= (unsigned long) adapter
;
1191 INIT_WORK(&adapter
->reset_task
, igb_reset_task
);
1192 INIT_WORK(&adapter
->watchdog_task
, igb_watchdog_task
);
1194 /* Initialize link & ring properties that are user-changeable */
1195 adapter
->tx_ring
->count
= 256;
1196 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
1197 adapter
->tx_ring
[i
].count
= adapter
->tx_ring
->count
;
1198 adapter
->rx_ring
->count
= 256;
1199 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
1200 adapter
->rx_ring
[i
].count
= adapter
->rx_ring
->count
;
1202 adapter
->fc_autoneg
= true;
1203 hw
->mac
.autoneg
= true;
1204 hw
->phy
.autoneg_advertised
= 0x2f;
1206 hw
->fc
.original_type
= e1000_fc_default
;
1207 hw
->fc
.type
= e1000_fc_default
;
1209 adapter
->itr_setting
= 3;
1210 adapter
->itr
= IGB_START_ITR
;
1212 igb_validate_mdi_setting(hw
);
1214 adapter
->rx_csum
= 1;
1216 /* Initial Wake on LAN setting If APM wake is enabled in the EEPROM,
1217 * enable the ACPI Magic Packet filter
1220 if (hw
->bus
.func
== 0 ||
1221 hw
->device_id
== E1000_DEV_ID_82575EB_COPPER
)
1222 hw
->nvm
.ops
.read_nvm(hw
, NVM_INIT_CONTROL3_PORT_A
, 1,
1225 if (eeprom_data
& eeprom_apme_mask
)
1226 adapter
->eeprom_wol
|= E1000_WUFC_MAG
;
1228 /* now that we have the eeprom settings, apply the special cases where
1229 * the eeprom may be wrong or the board simply won't support wake on
1230 * lan on a particular port */
1231 switch (pdev
->device
) {
1232 case E1000_DEV_ID_82575GB_QUAD_COPPER
:
1233 adapter
->eeprom_wol
= 0;
1235 case E1000_DEV_ID_82575EB_FIBER_SERDES
:
1236 case E1000_DEV_ID_82576_FIBER
:
1237 case E1000_DEV_ID_82576_SERDES
:
1238 /* Wake events only supported on port A for dual fiber
1239 * regardless of eeprom setting */
1240 if (rd32(E1000_STATUS
) & E1000_STATUS_FUNC_1
)
1241 adapter
->eeprom_wol
= 0;
1245 /* initialize the wol settings based on the eeprom settings */
1246 adapter
->wol
= adapter
->eeprom_wol
;
1248 /* reset the hardware with the new settings */
1251 /* let the f/w know that the h/w is now under the control of the
1253 igb_get_hw_control(adapter
);
1255 /* tell the stack to leave us alone until igb_open() is called */
1256 netif_carrier_off(netdev
);
1257 netif_tx_stop_all_queues(netdev
);
1259 strcpy(netdev
->name
, "eth%d");
1260 err
= register_netdev(netdev
);
1264 #ifdef CONFIG_IGB_DCA
1265 if ((adapter
->flags
& IGB_FLAG_HAS_DCA
) &&
1266 (dca_add_requester(&pdev
->dev
) == 0)) {
1267 adapter
->flags
|= IGB_FLAG_DCA_ENABLED
;
1268 dev_info(&pdev
->dev
, "DCA enabled\n");
1269 /* Always use CB2 mode, difference is masked
1270 * in the CB driver. */
1271 wr32(E1000_DCA_CTRL
, 2);
1272 igb_setup_dca(adapter
);
1276 dev_info(&pdev
->dev
, "Intel(R) Gigabit Ethernet Network Connection\n");
1277 /* print bus type/speed/width info */
1278 dev_info(&pdev
->dev
,
1279 "%s: (PCIe:%s:%s) %02x:%02x:%02x:%02x:%02x:%02x\n",
1281 ((hw
->bus
.speed
== e1000_bus_speed_2500
)
1282 ? "2.5Gb/s" : "unknown"),
1283 ((hw
->bus
.width
== e1000_bus_width_pcie_x4
)
1284 ? "Width x4" : (hw
->bus
.width
== e1000_bus_width_pcie_x1
)
1285 ? "Width x1" : "unknown"),
1286 netdev
->dev_addr
[0], netdev
->dev_addr
[1], netdev
->dev_addr
[2],
1287 netdev
->dev_addr
[3], netdev
->dev_addr
[4], netdev
->dev_addr
[5]);
1289 igb_read_part_num(hw
, &part_num
);
1290 dev_info(&pdev
->dev
, "%s: PBA No: %06x-%03x\n", netdev
->name
,
1291 (part_num
>> 8), (part_num
& 0xff));
1293 dev_info(&pdev
->dev
,
1294 "Using %s interrupts. %d rx queue(s), %d tx queue(s)\n",
1295 adapter
->msix_entries
? "MSI-X" :
1296 (adapter
->flags
& IGB_FLAG_HAS_MSI
) ? "MSI" : "legacy",
1297 adapter
->num_rx_queues
, adapter
->num_tx_queues
);
1302 igb_release_hw_control(adapter
);
1304 if (!igb_check_reset_block(hw
))
1305 hw
->phy
.ops
.reset_phy(hw
);
1307 if (hw
->flash_address
)
1308 iounmap(hw
->flash_address
);
1310 igb_remove_device(hw
);
1311 igb_free_queues(adapter
);
1314 iounmap(hw
->hw_addr
);
1316 free_netdev(netdev
);
1318 pci_release_selected_regions(pdev
, bars
);
1321 pci_disable_device(pdev
);
1326 * igb_remove - Device Removal Routine
1327 * @pdev: PCI device information struct
1329 * igb_remove is called by the PCI subsystem to alert the driver
1330 * that it should release a PCI device. The could be caused by a
1331 * Hot-Plug event, or because the driver is going to be removed from
1334 static void __devexit
igb_remove(struct pci_dev
*pdev
)
1336 struct net_device
*netdev
= pci_get_drvdata(pdev
);
1337 struct igb_adapter
*adapter
= netdev_priv(netdev
);
1338 #ifdef CONFIG_IGB_DCA
1339 struct e1000_hw
*hw
= &adapter
->hw
;
1342 /* flush_scheduled work may reschedule our watchdog task, so
1343 * explicitly disable watchdog tasks from being rescheduled */
1344 set_bit(__IGB_DOWN
, &adapter
->state
);
1345 del_timer_sync(&adapter
->watchdog_timer
);
1346 del_timer_sync(&adapter
->phy_info_timer
);
1348 flush_scheduled_work();
1350 #ifdef CONFIG_IGB_DCA
1351 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
) {
1352 dev_info(&pdev
->dev
, "DCA disabled\n");
1353 dca_remove_requester(&pdev
->dev
);
1354 adapter
->flags
&= ~IGB_FLAG_DCA_ENABLED
;
1355 wr32(E1000_DCA_CTRL
, 1);
1359 /* Release control of h/w to f/w. If f/w is AMT enabled, this
1360 * would have already happened in close and is redundant. */
1361 igb_release_hw_control(adapter
);
1363 unregister_netdev(netdev
);
1365 if (adapter
->hw
.phy
.ops
.reset_phy
&&
1366 !igb_check_reset_block(&adapter
->hw
))
1367 adapter
->hw
.phy
.ops
.reset_phy(&adapter
->hw
);
1369 igb_remove_device(&adapter
->hw
);
1370 igb_reset_interrupt_capability(adapter
);
1372 igb_free_queues(adapter
);
1374 iounmap(adapter
->hw
.hw_addr
);
1375 if (adapter
->hw
.flash_address
)
1376 iounmap(adapter
->hw
.flash_address
);
1377 pci_release_selected_regions(pdev
, adapter
->bars
);
1379 free_netdev(netdev
);
1381 pci_disable_device(pdev
);
1385 * igb_sw_init - Initialize general software structures (struct igb_adapter)
1386 * @adapter: board private structure to initialize
1388 * igb_sw_init initializes the Adapter private data structure.
1389 * Fields are initialized based on PCI device information and
1390 * OS network device settings (MTU size).
1392 static int __devinit
igb_sw_init(struct igb_adapter
*adapter
)
1394 struct e1000_hw
*hw
= &adapter
->hw
;
1395 struct net_device
*netdev
= adapter
->netdev
;
1396 struct pci_dev
*pdev
= adapter
->pdev
;
1398 pci_read_config_word(pdev
, PCI_COMMAND
, &hw
->bus
.pci_cmd_word
);
1400 adapter
->rx_buffer_len
= MAXIMUM_ETHERNET_VLAN_SIZE
;
1401 adapter
->rx_ps_hdr_size
= 0; /* disable packet split */
1402 adapter
->max_frame_size
= netdev
->mtu
+ ETH_HLEN
+ ETH_FCS_LEN
;
1403 adapter
->min_frame_size
= ETH_ZLEN
+ ETH_FCS_LEN
;
1405 /* Number of supported queues. */
1406 /* Having more queues than CPUs doesn't make sense. */
1407 adapter
->num_rx_queues
= min((u32
)IGB_MAX_RX_QUEUES
, (u32
)num_online_cpus());
1408 adapter
->num_tx_queues
= min(IGB_MAX_TX_QUEUES
, num_online_cpus());
1410 /* This call may decrease the number of queues depending on
1411 * interrupt mode. */
1412 igb_set_interrupt_capability(adapter
);
1414 if (igb_alloc_queues(adapter
)) {
1415 dev_err(&pdev
->dev
, "Unable to allocate memory for queues\n");
1419 /* Explicitly disable IRQ since the NIC can be in any state. */
1420 igb_irq_disable(adapter
);
1422 set_bit(__IGB_DOWN
, &adapter
->state
);
1427 * igb_open - Called when a network interface is made active
1428 * @netdev: network interface device structure
1430 * Returns 0 on success, negative value on failure
1432 * The open entry point is called when a network interface is made
1433 * active by the system (IFF_UP). At this point all resources needed
1434 * for transmit and receive operations are allocated, the interrupt
1435 * handler is registered with the OS, the watchdog timer is started,
1436 * and the stack is notified that the interface is ready.
1438 static int igb_open(struct net_device
*netdev
)
1440 struct igb_adapter
*adapter
= netdev_priv(netdev
);
1441 struct e1000_hw
*hw
= &adapter
->hw
;
1445 /* disallow open during test */
1446 if (test_bit(__IGB_TESTING
, &adapter
->state
))
1449 /* allocate transmit descriptors */
1450 err
= igb_setup_all_tx_resources(adapter
);
1454 /* allocate receive descriptors */
1455 err
= igb_setup_all_rx_resources(adapter
);
1459 /* e1000_power_up_phy(adapter); */
1461 adapter
->mng_vlan_id
= IGB_MNG_VLAN_NONE
;
1462 if ((adapter
->hw
.mng_cookie
.status
&
1463 E1000_MNG_DHCP_COOKIE_STATUS_VLAN
))
1464 igb_update_mng_vlan(adapter
);
1466 /* before we allocate an interrupt, we must be ready to handle it.
1467 * Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
1468 * as soon as we call pci_request_irq, so we have to setup our
1469 * clean_rx handler before we do so. */
1470 igb_configure(adapter
);
1472 err
= igb_request_irq(adapter
);
1476 /* From here on the code is the same as igb_up() */
1477 clear_bit(__IGB_DOWN
, &adapter
->state
);
1479 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
1480 napi_enable(&adapter
->rx_ring
[i
].napi
);
1482 /* Clear any pending interrupts. */
1485 igb_irq_enable(adapter
);
1487 netif_tx_start_all_queues(netdev
);
1489 /* Fire a link status change interrupt to start the watchdog. */
1490 wr32(E1000_ICS
, E1000_ICS_LSC
);
1495 igb_release_hw_control(adapter
);
1496 /* e1000_power_down_phy(adapter); */
1497 igb_free_all_rx_resources(adapter
);
1499 igb_free_all_tx_resources(adapter
);
1507 * igb_close - Disables a network interface
1508 * @netdev: network interface device structure
1510 * Returns 0, this is not allowed to fail
1512 * The close entry point is called when an interface is de-activated
1513 * by the OS. The hardware is still under the driver's control, but
1514 * needs to be disabled. A global MAC reset is issued to stop the
1515 * hardware, and all transmit and receive resources are freed.
1517 static int igb_close(struct net_device
*netdev
)
1519 struct igb_adapter
*adapter
= netdev_priv(netdev
);
1521 WARN_ON(test_bit(__IGB_RESETTING
, &adapter
->state
));
1524 igb_free_irq(adapter
);
1526 igb_free_all_tx_resources(adapter
);
1527 igb_free_all_rx_resources(adapter
);
1529 /* kill manageability vlan ID if supported, but not if a vlan with
1530 * the same ID is registered on the host OS (let 8021q kill it) */
1531 if ((adapter
->hw
.mng_cookie
.status
&
1532 E1000_MNG_DHCP_COOKIE_STATUS_VLAN
) &&
1534 vlan_group_get_device(adapter
->vlgrp
, adapter
->mng_vlan_id
)))
1535 igb_vlan_rx_kill_vid(netdev
, adapter
->mng_vlan_id
);
1541 * igb_setup_tx_resources - allocate Tx resources (Descriptors)
1542 * @adapter: board private structure
1543 * @tx_ring: tx descriptor ring (for a specific queue) to setup
1545 * Return 0 on success, negative on failure
1548 int igb_setup_tx_resources(struct igb_adapter
*adapter
,
1549 struct igb_ring
*tx_ring
)
1551 struct pci_dev
*pdev
= adapter
->pdev
;
1554 size
= sizeof(struct igb_buffer
) * tx_ring
->count
;
1555 tx_ring
->buffer_info
= vmalloc(size
);
1556 if (!tx_ring
->buffer_info
)
1558 memset(tx_ring
->buffer_info
, 0, size
);
1560 /* round up to nearest 4K */
1561 tx_ring
->size
= tx_ring
->count
* sizeof(struct e1000_tx_desc
)
1563 tx_ring
->size
= ALIGN(tx_ring
->size
, 4096);
1565 tx_ring
->desc
= pci_alloc_consistent(pdev
, tx_ring
->size
,
1571 tx_ring
->adapter
= adapter
;
1572 tx_ring
->next_to_use
= 0;
1573 tx_ring
->next_to_clean
= 0;
1577 vfree(tx_ring
->buffer_info
);
1578 dev_err(&adapter
->pdev
->dev
,
1579 "Unable to allocate memory for the transmit descriptor ring\n");
1584 * igb_setup_all_tx_resources - wrapper to allocate Tx resources
1585 * (Descriptors) for all queues
1586 * @adapter: board private structure
1588 * Return 0 on success, negative on failure
1590 static int igb_setup_all_tx_resources(struct igb_adapter
*adapter
)
1595 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
1596 err
= igb_setup_tx_resources(adapter
, &adapter
->tx_ring
[i
]);
1598 dev_err(&adapter
->pdev
->dev
,
1599 "Allocation for Tx Queue %u failed\n", i
);
1600 for (i
--; i
>= 0; i
--)
1601 igb_free_tx_resources(&adapter
->tx_ring
[i
]);
1606 for (i
= 0; i
< IGB_MAX_TX_QUEUES
; i
++) {
1607 r_idx
= i
% adapter
->num_tx_queues
;
1608 adapter
->multi_tx_table
[i
] = &adapter
->tx_ring
[r_idx
];
1614 * igb_configure_tx - Configure transmit Unit after Reset
1615 * @adapter: board private structure
1617 * Configure the Tx unit of the MAC after a reset.
1619 static void igb_configure_tx(struct igb_adapter
*adapter
)
1622 struct e1000_hw
*hw
= &adapter
->hw
;
1627 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
1628 struct igb_ring
*ring
= &(adapter
->tx_ring
[i
]);
1630 wr32(E1000_TDLEN(i
),
1631 ring
->count
* sizeof(struct e1000_tx_desc
));
1633 wr32(E1000_TDBAL(i
),
1634 tdba
& 0x00000000ffffffffULL
);
1635 wr32(E1000_TDBAH(i
), tdba
>> 32);
1637 tdwba
= ring
->dma
+ ring
->count
* sizeof(struct e1000_tx_desc
);
1638 tdwba
|= 1; /* enable head wb */
1639 wr32(E1000_TDWBAL(i
),
1640 tdwba
& 0x00000000ffffffffULL
);
1641 wr32(E1000_TDWBAH(i
), tdwba
>> 32);
1643 ring
->head
= E1000_TDH(i
);
1644 ring
->tail
= E1000_TDT(i
);
1645 writel(0, hw
->hw_addr
+ ring
->tail
);
1646 writel(0, hw
->hw_addr
+ ring
->head
);
1647 txdctl
= rd32(E1000_TXDCTL(i
));
1648 txdctl
|= E1000_TXDCTL_QUEUE_ENABLE
;
1649 wr32(E1000_TXDCTL(i
), txdctl
);
1651 /* Turn off Relaxed Ordering on head write-backs. The
1652 * writebacks MUST be delivered in order or it will
1653 * completely screw up our bookeeping.
1655 txctrl
= rd32(E1000_DCA_TXCTRL(i
));
1656 txctrl
&= ~E1000_DCA_TXCTRL_TX_WB_RO_EN
;
1657 wr32(E1000_DCA_TXCTRL(i
), txctrl
);
1662 /* Use the default values for the Tx Inter Packet Gap (IPG) timer */
1664 /* Program the Transmit Control Register */
1666 tctl
= rd32(E1000_TCTL
);
1667 tctl
&= ~E1000_TCTL_CT
;
1668 tctl
|= E1000_TCTL_PSP
| E1000_TCTL_RTLC
|
1669 (E1000_COLLISION_THRESHOLD
<< E1000_CT_SHIFT
);
1671 igb_config_collision_dist(hw
);
1673 /* Setup Transmit Descriptor Settings for eop descriptor */
1674 adapter
->txd_cmd
= E1000_TXD_CMD_EOP
| E1000_TXD_CMD_RS
;
1676 /* Enable transmits */
1677 tctl
|= E1000_TCTL_EN
;
1679 wr32(E1000_TCTL
, tctl
);
1683 * igb_setup_rx_resources - allocate Rx resources (Descriptors)
1684 * @adapter: board private structure
1685 * @rx_ring: rx descriptor ring (for a specific queue) to setup
1687 * Returns 0 on success, negative on failure
1690 int igb_setup_rx_resources(struct igb_adapter
*adapter
,
1691 struct igb_ring
*rx_ring
)
1693 struct pci_dev
*pdev
= adapter
->pdev
;
1696 #ifdef CONFIG_IGB_LRO
1697 size
= sizeof(struct net_lro_desc
) * MAX_LRO_DESCRIPTORS
;
1698 rx_ring
->lro_mgr
.lro_arr
= vmalloc(size
);
1699 if (!rx_ring
->lro_mgr
.lro_arr
)
1701 memset(rx_ring
->lro_mgr
.lro_arr
, 0, size
);
1704 size
= sizeof(struct igb_buffer
) * rx_ring
->count
;
1705 rx_ring
->buffer_info
= vmalloc(size
);
1706 if (!rx_ring
->buffer_info
)
1708 memset(rx_ring
->buffer_info
, 0, size
);
1710 desc_len
= sizeof(union e1000_adv_rx_desc
);
1712 /* Round up to nearest 4K */
1713 rx_ring
->size
= rx_ring
->count
* desc_len
;
1714 rx_ring
->size
= ALIGN(rx_ring
->size
, 4096);
1716 rx_ring
->desc
= pci_alloc_consistent(pdev
, rx_ring
->size
,
1722 rx_ring
->next_to_clean
= 0;
1723 rx_ring
->next_to_use
= 0;
1725 rx_ring
->adapter
= adapter
;
1730 #ifdef CONFIG_IGB_LRO
1731 vfree(rx_ring
->lro_mgr
.lro_arr
);
1732 rx_ring
->lro_mgr
.lro_arr
= NULL
;
1734 vfree(rx_ring
->buffer_info
);
1735 dev_err(&adapter
->pdev
->dev
, "Unable to allocate memory for "
1736 "the receive descriptor ring\n");
1741 * igb_setup_all_rx_resources - wrapper to allocate Rx resources
1742 * (Descriptors) for all queues
1743 * @adapter: board private structure
1745 * Return 0 on success, negative on failure
1747 static int igb_setup_all_rx_resources(struct igb_adapter
*adapter
)
1751 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
1752 err
= igb_setup_rx_resources(adapter
, &adapter
->rx_ring
[i
]);
1754 dev_err(&adapter
->pdev
->dev
,
1755 "Allocation for Rx Queue %u failed\n", i
);
1756 for (i
--; i
>= 0; i
--)
1757 igb_free_rx_resources(&adapter
->rx_ring
[i
]);
1766 * igb_setup_rctl - configure the receive control registers
1767 * @adapter: Board private structure
1769 static void igb_setup_rctl(struct igb_adapter
*adapter
)
1771 struct e1000_hw
*hw
= &adapter
->hw
;
1776 rctl
= rd32(E1000_RCTL
);
1778 rctl
&= ~(3 << E1000_RCTL_MO_SHIFT
);
1780 rctl
|= E1000_RCTL_EN
| E1000_RCTL_BAM
|
1781 E1000_RCTL_LBM_NO
| E1000_RCTL_RDMTS_HALF
|
1782 (adapter
->hw
.mac
.mc_filter_type
<< E1000_RCTL_MO_SHIFT
);
1785 * enable stripping of CRC. It's unlikely this will break BMC
1786 * redirection as it did with e1000. Newer features require
1787 * that the HW strips the CRC.
1789 rctl
|= E1000_RCTL_SECRC
;
1791 rctl
&= ~E1000_RCTL_SBP
;
1793 if (adapter
->netdev
->mtu
<= ETH_DATA_LEN
)
1794 rctl
&= ~E1000_RCTL_LPE
;
1796 rctl
|= E1000_RCTL_LPE
;
1797 if (adapter
->rx_buffer_len
<= IGB_RXBUFFER_2048
) {
1798 /* Setup buffer sizes */
1799 rctl
&= ~E1000_RCTL_SZ_4096
;
1800 rctl
|= E1000_RCTL_BSEX
;
1801 switch (adapter
->rx_buffer_len
) {
1802 case IGB_RXBUFFER_256
:
1803 rctl
|= E1000_RCTL_SZ_256
;
1804 rctl
&= ~E1000_RCTL_BSEX
;
1806 case IGB_RXBUFFER_512
:
1807 rctl
|= E1000_RCTL_SZ_512
;
1808 rctl
&= ~E1000_RCTL_BSEX
;
1810 case IGB_RXBUFFER_1024
:
1811 rctl
|= E1000_RCTL_SZ_1024
;
1812 rctl
&= ~E1000_RCTL_BSEX
;
1814 case IGB_RXBUFFER_2048
:
1816 rctl
|= E1000_RCTL_SZ_2048
;
1817 rctl
&= ~E1000_RCTL_BSEX
;
1821 rctl
&= ~E1000_RCTL_BSEX
;
1822 srrctl
= adapter
->rx_buffer_len
>> E1000_SRRCTL_BSIZEPKT_SHIFT
;
1825 /* 82575 and greater support packet-split where the protocol
1826 * header is placed in skb->data and the packet data is
1827 * placed in pages hanging off of skb_shinfo(skb)->nr_frags.
1828 * In the case of a non-split, skb->data is linearly filled,
1829 * followed by the page buffers. Therefore, skb->data is
1830 * sized to hold the largest protocol header.
1832 /* allocations using alloc_page take too long for regular MTU
1833 * so only enable packet split for jumbo frames */
1834 if (rctl
& E1000_RCTL_LPE
) {
1835 adapter
->rx_ps_hdr_size
= IGB_RXBUFFER_128
;
1836 srrctl
|= adapter
->rx_ps_hdr_size
<<
1837 E1000_SRRCTL_BSIZEHDRSIZE_SHIFT
;
1838 srrctl
|= E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS
;
1840 adapter
->rx_ps_hdr_size
= 0;
1841 srrctl
|= E1000_SRRCTL_DESCTYPE_ADV_ONEBUF
;
1844 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
1845 wr32(E1000_SRRCTL(i
), srrctl
);
1847 wr32(E1000_RCTL
, rctl
);
1851 * igb_configure_rx - Configure receive Unit after Reset
1852 * @adapter: board private structure
1854 * Configure the Rx unit of the MAC after a reset.
1856 static void igb_configure_rx(struct igb_adapter
*adapter
)
1859 struct e1000_hw
*hw
= &adapter
->hw
;
1864 /* disable receives while setting up the descriptors */
1865 rctl
= rd32(E1000_RCTL
);
1866 wr32(E1000_RCTL
, rctl
& ~E1000_RCTL_EN
);
1870 if (adapter
->itr_setting
> 3)
1871 wr32(E1000_ITR
, adapter
->itr
);
1873 /* Setup the HW Rx Head and Tail Descriptor Pointers and
1874 * the Base and Length of the Rx Descriptor Ring */
1875 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
1876 struct igb_ring
*ring
= &(adapter
->rx_ring
[i
]);
1878 wr32(E1000_RDBAL(i
),
1879 rdba
& 0x00000000ffffffffULL
);
1880 wr32(E1000_RDBAH(i
), rdba
>> 32);
1881 wr32(E1000_RDLEN(i
),
1882 ring
->count
* sizeof(union e1000_adv_rx_desc
));
1884 ring
->head
= E1000_RDH(i
);
1885 ring
->tail
= E1000_RDT(i
);
1886 writel(0, hw
->hw_addr
+ ring
->tail
);
1887 writel(0, hw
->hw_addr
+ ring
->head
);
1889 rxdctl
= rd32(E1000_RXDCTL(i
));
1890 rxdctl
|= E1000_RXDCTL_QUEUE_ENABLE
;
1891 rxdctl
&= 0xFFF00000;
1892 rxdctl
|= IGB_RX_PTHRESH
;
1893 rxdctl
|= IGB_RX_HTHRESH
<< 8;
1894 rxdctl
|= IGB_RX_WTHRESH
<< 16;
1895 wr32(E1000_RXDCTL(i
), rxdctl
);
1896 #ifdef CONFIG_IGB_LRO
1897 /* Intitial LRO Settings */
1898 ring
->lro_mgr
.max_aggr
= MAX_LRO_AGGR
;
1899 ring
->lro_mgr
.max_desc
= MAX_LRO_DESCRIPTORS
;
1900 ring
->lro_mgr
.get_skb_header
= igb_get_skb_hdr
;
1901 ring
->lro_mgr
.features
= LRO_F_NAPI
| LRO_F_EXTRACT_VLAN_ID
;
1902 ring
->lro_mgr
.dev
= adapter
->netdev
;
1903 ring
->lro_mgr
.ip_summed
= CHECKSUM_UNNECESSARY
;
1904 ring
->lro_mgr
.ip_summed_aggr
= CHECKSUM_UNNECESSARY
;
1908 if (adapter
->num_rx_queues
> 1) {
1917 get_random_bytes(&random
[0], 40);
1919 if (hw
->mac
.type
>= e1000_82576
)
1923 for (j
= 0; j
< (32 * 4); j
++) {
1925 (j
% adapter
->num_rx_queues
) << shift
;
1928 hw
->hw_addr
+ E1000_RETA(0) + (j
& ~3));
1930 mrqc
= E1000_MRQC_ENABLE_RSS_4Q
;
1932 /* Fill out hash function seeds */
1933 for (j
= 0; j
< 10; j
++)
1934 array_wr32(E1000_RSSRK(0), j
, random
[j
]);
1936 mrqc
|= (E1000_MRQC_RSS_FIELD_IPV4
|
1937 E1000_MRQC_RSS_FIELD_IPV4_TCP
);
1938 mrqc
|= (E1000_MRQC_RSS_FIELD_IPV6
|
1939 E1000_MRQC_RSS_FIELD_IPV6_TCP
);
1940 mrqc
|= (E1000_MRQC_RSS_FIELD_IPV4_UDP
|
1941 E1000_MRQC_RSS_FIELD_IPV6_UDP
);
1942 mrqc
|= (E1000_MRQC_RSS_FIELD_IPV6_UDP_EX
|
1943 E1000_MRQC_RSS_FIELD_IPV6_TCP_EX
);
1946 wr32(E1000_MRQC
, mrqc
);
1948 /* Multiqueue and raw packet checksumming are mutually
1949 * exclusive. Note that this not the same as TCP/IP
1950 * checksumming, which works fine. */
1951 rxcsum
= rd32(E1000_RXCSUM
);
1952 rxcsum
|= E1000_RXCSUM_PCSD
;
1953 wr32(E1000_RXCSUM
, rxcsum
);
1955 /* Enable Receive Checksum Offload for TCP and UDP */
1956 rxcsum
= rd32(E1000_RXCSUM
);
1957 if (adapter
->rx_csum
) {
1958 rxcsum
|= E1000_RXCSUM_TUOFL
;
1960 /* Enable IPv4 payload checksum for UDP fragments
1961 * Must be used in conjunction with packet-split. */
1962 if (adapter
->rx_ps_hdr_size
)
1963 rxcsum
|= E1000_RXCSUM_IPPCSE
;
1965 rxcsum
&= ~E1000_RXCSUM_TUOFL
;
1966 /* don't need to clear IPPCSE as it defaults to 0 */
1968 wr32(E1000_RXCSUM
, rxcsum
);
1973 adapter
->max_frame_size
+ VLAN_TAG_SIZE
);
1975 wr32(E1000_RLPML
, adapter
->max_frame_size
);
1977 /* Enable Receives */
1978 wr32(E1000_RCTL
, rctl
);
1982 * igb_free_tx_resources - Free Tx Resources per Queue
1983 * @adapter: board private structure
1984 * @tx_ring: Tx descriptor ring for a specific queue
1986 * Free all transmit software resources
1988 static void igb_free_tx_resources(struct igb_ring
*tx_ring
)
1990 struct pci_dev
*pdev
= tx_ring
->adapter
->pdev
;
1992 igb_clean_tx_ring(tx_ring
);
1994 vfree(tx_ring
->buffer_info
);
1995 tx_ring
->buffer_info
= NULL
;
1997 pci_free_consistent(pdev
, tx_ring
->size
, tx_ring
->desc
, tx_ring
->dma
);
1999 tx_ring
->desc
= NULL
;
2003 * igb_free_all_tx_resources - Free Tx Resources for All Queues
2004 * @adapter: board private structure
2006 * Free all transmit software resources
2008 static void igb_free_all_tx_resources(struct igb_adapter
*adapter
)
2012 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
2013 igb_free_tx_resources(&adapter
->tx_ring
[i
]);
2016 static void igb_unmap_and_free_tx_resource(struct igb_adapter
*adapter
,
2017 struct igb_buffer
*buffer_info
)
2019 if (buffer_info
->dma
) {
2020 pci_unmap_page(adapter
->pdev
,
2022 buffer_info
->length
,
2024 buffer_info
->dma
= 0;
2026 if (buffer_info
->skb
) {
2027 dev_kfree_skb_any(buffer_info
->skb
);
2028 buffer_info
->skb
= NULL
;
2030 buffer_info
->time_stamp
= 0;
2031 /* buffer_info must be completely set up in the transmit path */
2035 * igb_clean_tx_ring - Free Tx Buffers
2036 * @adapter: board private structure
2037 * @tx_ring: ring to be cleaned
2039 static void igb_clean_tx_ring(struct igb_ring
*tx_ring
)
2041 struct igb_adapter
*adapter
= tx_ring
->adapter
;
2042 struct igb_buffer
*buffer_info
;
2046 if (!tx_ring
->buffer_info
)
2048 /* Free all the Tx ring sk_buffs */
2050 for (i
= 0; i
< tx_ring
->count
; i
++) {
2051 buffer_info
= &tx_ring
->buffer_info
[i
];
2052 igb_unmap_and_free_tx_resource(adapter
, buffer_info
);
2055 size
= sizeof(struct igb_buffer
) * tx_ring
->count
;
2056 memset(tx_ring
->buffer_info
, 0, size
);
2058 /* Zero out the descriptor ring */
2060 memset(tx_ring
->desc
, 0, tx_ring
->size
);
2062 tx_ring
->next_to_use
= 0;
2063 tx_ring
->next_to_clean
= 0;
2065 writel(0, adapter
->hw
.hw_addr
+ tx_ring
->head
);
2066 writel(0, adapter
->hw
.hw_addr
+ tx_ring
->tail
);
2070 * igb_clean_all_tx_rings - Free Tx Buffers for all queues
2071 * @adapter: board private structure
2073 static void igb_clean_all_tx_rings(struct igb_adapter
*adapter
)
2077 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
2078 igb_clean_tx_ring(&adapter
->tx_ring
[i
]);
2082 * igb_free_rx_resources - Free Rx Resources
2083 * @adapter: board private structure
2084 * @rx_ring: ring to clean the resources from
2086 * Free all receive software resources
2088 static void igb_free_rx_resources(struct igb_ring
*rx_ring
)
2090 struct pci_dev
*pdev
= rx_ring
->adapter
->pdev
;
2092 igb_clean_rx_ring(rx_ring
);
2094 vfree(rx_ring
->buffer_info
);
2095 rx_ring
->buffer_info
= NULL
;
2097 #ifdef CONFIG_IGB_LRO
2098 vfree(rx_ring
->lro_mgr
.lro_arr
);
2099 rx_ring
->lro_mgr
.lro_arr
= NULL
;
2102 pci_free_consistent(pdev
, rx_ring
->size
, rx_ring
->desc
, rx_ring
->dma
);
2104 rx_ring
->desc
= NULL
;
2108 * igb_free_all_rx_resources - Free Rx Resources for All Queues
2109 * @adapter: board private structure
2111 * Free all receive software resources
2113 static void igb_free_all_rx_resources(struct igb_adapter
*adapter
)
2117 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
2118 igb_free_rx_resources(&adapter
->rx_ring
[i
]);
2122 * igb_clean_rx_ring - Free Rx Buffers per Queue
2123 * @adapter: board private structure
2124 * @rx_ring: ring to free buffers from
2126 static void igb_clean_rx_ring(struct igb_ring
*rx_ring
)
2128 struct igb_adapter
*adapter
= rx_ring
->adapter
;
2129 struct igb_buffer
*buffer_info
;
2130 struct pci_dev
*pdev
= adapter
->pdev
;
2134 if (!rx_ring
->buffer_info
)
2136 /* Free all the Rx ring sk_buffs */
2137 for (i
= 0; i
< rx_ring
->count
; i
++) {
2138 buffer_info
= &rx_ring
->buffer_info
[i
];
2139 if (buffer_info
->dma
) {
2140 if (adapter
->rx_ps_hdr_size
)
2141 pci_unmap_single(pdev
, buffer_info
->dma
,
2142 adapter
->rx_ps_hdr_size
,
2143 PCI_DMA_FROMDEVICE
);
2145 pci_unmap_single(pdev
, buffer_info
->dma
,
2146 adapter
->rx_buffer_len
,
2147 PCI_DMA_FROMDEVICE
);
2148 buffer_info
->dma
= 0;
2151 if (buffer_info
->skb
) {
2152 dev_kfree_skb(buffer_info
->skb
);
2153 buffer_info
->skb
= NULL
;
2155 if (buffer_info
->page
) {
2156 if (buffer_info
->page_dma
)
2157 pci_unmap_page(pdev
, buffer_info
->page_dma
,
2159 PCI_DMA_FROMDEVICE
);
2160 put_page(buffer_info
->page
);
2161 buffer_info
->page
= NULL
;
2162 buffer_info
->page_dma
= 0;
2163 buffer_info
->page_offset
= 0;
2167 size
= sizeof(struct igb_buffer
) * rx_ring
->count
;
2168 memset(rx_ring
->buffer_info
, 0, size
);
2170 /* Zero out the descriptor ring */
2171 memset(rx_ring
->desc
, 0, rx_ring
->size
);
2173 rx_ring
->next_to_clean
= 0;
2174 rx_ring
->next_to_use
= 0;
2176 writel(0, adapter
->hw
.hw_addr
+ rx_ring
->head
);
2177 writel(0, adapter
->hw
.hw_addr
+ rx_ring
->tail
);
2181 * igb_clean_all_rx_rings - Free Rx Buffers for all queues
2182 * @adapter: board private structure
2184 static void igb_clean_all_rx_rings(struct igb_adapter
*adapter
)
2188 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
2189 igb_clean_rx_ring(&adapter
->rx_ring
[i
]);
2193 * igb_set_mac - Change the Ethernet Address of the NIC
2194 * @netdev: network interface device structure
2195 * @p: pointer to an address structure
2197 * Returns 0 on success, negative on failure
2199 static int igb_set_mac(struct net_device
*netdev
, void *p
)
2201 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2202 struct sockaddr
*addr
= p
;
2204 if (!is_valid_ether_addr(addr
->sa_data
))
2205 return -EADDRNOTAVAIL
;
2207 memcpy(netdev
->dev_addr
, addr
->sa_data
, netdev
->addr_len
);
2208 memcpy(adapter
->hw
.mac
.addr
, addr
->sa_data
, netdev
->addr_len
);
2210 adapter
->hw
.mac
.ops
.rar_set(&adapter
->hw
, adapter
->hw
.mac
.addr
, 0);
2216 * igb_set_multi - Multicast and Promiscuous mode set
2217 * @netdev: network interface device structure
2219 * The set_multi entry point is called whenever the multicast address
2220 * list or the network interface flags are updated. This routine is
2221 * responsible for configuring the hardware for proper multicast,
2222 * promiscuous mode, and all-multi behavior.
2224 static void igb_set_multi(struct net_device
*netdev
)
2226 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2227 struct e1000_hw
*hw
= &adapter
->hw
;
2228 struct e1000_mac_info
*mac
= &hw
->mac
;
2229 struct dev_mc_list
*mc_ptr
;
2234 /* Check for Promiscuous and All Multicast modes */
2236 rctl
= rd32(E1000_RCTL
);
2238 if (netdev
->flags
& IFF_PROMISC
) {
2239 rctl
|= (E1000_RCTL_UPE
| E1000_RCTL_MPE
);
2240 rctl
&= ~E1000_RCTL_VFE
;
2242 if (netdev
->flags
& IFF_ALLMULTI
) {
2243 rctl
|= E1000_RCTL_MPE
;
2244 rctl
&= ~E1000_RCTL_UPE
;
2246 rctl
&= ~(E1000_RCTL_UPE
| E1000_RCTL_MPE
);
2247 rctl
|= E1000_RCTL_VFE
;
2249 wr32(E1000_RCTL
, rctl
);
2251 if (!netdev
->mc_count
) {
2252 /* nothing to program, so clear mc list */
2253 igb_update_mc_addr_list_82575(hw
, NULL
, 0, 1,
2254 mac
->rar_entry_count
);
2258 mta_list
= kzalloc(netdev
->mc_count
* 6, GFP_ATOMIC
);
2262 /* The shared function expects a packed array of only addresses. */
2263 mc_ptr
= netdev
->mc_list
;
2265 for (i
= 0; i
< netdev
->mc_count
; i
++) {
2268 memcpy(mta_list
+ (i
*ETH_ALEN
), mc_ptr
->dmi_addr
, ETH_ALEN
);
2269 mc_ptr
= mc_ptr
->next
;
2271 igb_update_mc_addr_list_82575(hw
, mta_list
, i
, 1,
2272 mac
->rar_entry_count
);
2276 /* Need to wait a few seconds after link up to get diagnostic information from
2278 static void igb_update_phy_info(unsigned long data
)
2280 struct igb_adapter
*adapter
= (struct igb_adapter
*) data
;
2281 if (adapter
->hw
.phy
.ops
.get_phy_info
)
2282 adapter
->hw
.phy
.ops
.get_phy_info(&adapter
->hw
);
2286 * igb_watchdog - Timer Call-back
2287 * @data: pointer to adapter cast into an unsigned long
2289 static void igb_watchdog(unsigned long data
)
2291 struct igb_adapter
*adapter
= (struct igb_adapter
*)data
;
2292 /* Do the rest outside of interrupt context */
2293 schedule_work(&adapter
->watchdog_task
);
2296 static void igb_watchdog_task(struct work_struct
*work
)
2298 struct igb_adapter
*adapter
= container_of(work
,
2299 struct igb_adapter
, watchdog_task
);
2300 struct e1000_hw
*hw
= &adapter
->hw
;
2302 struct net_device
*netdev
= adapter
->netdev
;
2303 struct igb_ring
*tx_ring
= adapter
->tx_ring
;
2304 struct e1000_mac_info
*mac
= &adapter
->hw
.mac
;
2310 if ((netif_carrier_ok(netdev
)) &&
2311 (rd32(E1000_STATUS
) & E1000_STATUS_LU
))
2314 ret_val
= hw
->mac
.ops
.check_for_link(&adapter
->hw
);
2315 if ((ret_val
== E1000_ERR_PHY
) &&
2316 (hw
->phy
.type
== e1000_phy_igp_3
) &&
2318 E1000_PHY_CTRL_GBE_DISABLE
))
2319 dev_info(&adapter
->pdev
->dev
,
2320 "Gigabit has been disabled, downgrading speed\n");
2322 if ((hw
->phy
.media_type
== e1000_media_type_internal_serdes
) &&
2323 !(rd32(E1000_TXCW
) & E1000_TXCW_ANE
))
2324 link
= mac
->serdes_has_link
;
2326 link
= rd32(E1000_STATUS
) &
2330 if (!netif_carrier_ok(netdev
)) {
2332 hw
->mac
.ops
.get_speed_and_duplex(&adapter
->hw
,
2333 &adapter
->link_speed
,
2334 &adapter
->link_duplex
);
2336 ctrl
= rd32(E1000_CTRL
);
2337 dev_info(&adapter
->pdev
->dev
,
2338 "NIC Link is Up %d Mbps %s, "
2339 "Flow Control: %s\n",
2340 adapter
->link_speed
,
2341 adapter
->link_duplex
== FULL_DUPLEX
?
2342 "Full Duplex" : "Half Duplex",
2343 ((ctrl
& E1000_CTRL_TFCE
) && (ctrl
&
2344 E1000_CTRL_RFCE
)) ? "RX/TX" : ((ctrl
&
2345 E1000_CTRL_RFCE
) ? "RX" : ((ctrl
&
2346 E1000_CTRL_TFCE
) ? "TX" : "None")));
2348 /* tweak tx_queue_len according to speed/duplex and
2349 * adjust the timeout factor */
2350 netdev
->tx_queue_len
= adapter
->tx_queue_len
;
2351 adapter
->tx_timeout_factor
= 1;
2352 switch (adapter
->link_speed
) {
2354 netdev
->tx_queue_len
= 10;
2355 adapter
->tx_timeout_factor
= 14;
2358 netdev
->tx_queue_len
= 100;
2359 /* maybe add some timeout factor ? */
2363 netif_carrier_on(netdev
);
2364 netif_tx_wake_all_queues(netdev
);
2366 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
2367 mod_timer(&adapter
->phy_info_timer
,
2368 round_jiffies(jiffies
+ 2 * HZ
));
2371 if (netif_carrier_ok(netdev
)) {
2372 adapter
->link_speed
= 0;
2373 adapter
->link_duplex
= 0;
2374 dev_info(&adapter
->pdev
->dev
, "NIC Link is Down\n");
2375 netif_carrier_off(netdev
);
2376 netif_tx_stop_all_queues(netdev
);
2377 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
2378 mod_timer(&adapter
->phy_info_timer
,
2379 round_jiffies(jiffies
+ 2 * HZ
));
2384 igb_update_stats(adapter
);
2386 mac
->tx_packet_delta
= adapter
->stats
.tpt
- adapter
->tpt_old
;
2387 adapter
->tpt_old
= adapter
->stats
.tpt
;
2388 mac
->collision_delta
= adapter
->stats
.colc
- adapter
->colc_old
;
2389 adapter
->colc_old
= adapter
->stats
.colc
;
2391 adapter
->gorc
= adapter
->stats
.gorc
- adapter
->gorc_old
;
2392 adapter
->gorc_old
= adapter
->stats
.gorc
;
2393 adapter
->gotc
= adapter
->stats
.gotc
- adapter
->gotc_old
;
2394 adapter
->gotc_old
= adapter
->stats
.gotc
;
2396 igb_update_adaptive(&adapter
->hw
);
2398 if (!netif_carrier_ok(netdev
)) {
2399 if (IGB_DESC_UNUSED(tx_ring
) + 1 < tx_ring
->count
) {
2400 /* We've lost link, so the controller stops DMA,
2401 * but we've got queued Tx work that's never going
2402 * to get done, so reset controller to flush Tx.
2403 * (Do the reset outside of interrupt context). */
2404 adapter
->tx_timeout_count
++;
2405 schedule_work(&adapter
->reset_task
);
2409 /* Cause software interrupt to ensure rx ring is cleaned */
2410 if (adapter
->msix_entries
) {
2411 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
2412 eics
|= adapter
->rx_ring
[i
].eims_value
;
2413 wr32(E1000_EICS
, eics
);
2415 wr32(E1000_ICS
, E1000_ICS_RXDMT0
);
2418 /* Force detection of hung controller every watchdog period */
2419 tx_ring
->detect_tx_hung
= true;
2421 /* Reset the timer */
2422 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
2423 mod_timer(&adapter
->watchdog_timer
,
2424 round_jiffies(jiffies
+ 2 * HZ
));
2427 enum latency_range
{
2431 latency_invalid
= 255
2436 * igb_update_ring_itr - update the dynamic ITR value based on packet size
2438 * Stores a new ITR value based on strictly on packet size. This
2439 * algorithm is less sophisticated than that used in igb_update_itr,
2440 * due to the difficulty of synchronizing statistics across multiple
2441 * receive rings. The divisors and thresholds used by this fuction
2442 * were determined based on theoretical maximum wire speed and testing
2443 * data, in order to minimize response time while increasing bulk
2445 * This functionality is controlled by the InterruptThrottleRate module
2446 * parameter (see igb_param.c)
2447 * NOTE: This function is called only when operating in a multiqueue
2448 * receive environment.
2449 * @rx_ring: pointer to ring
2451 static void igb_update_ring_itr(struct igb_ring
*rx_ring
)
2453 int new_val
= rx_ring
->itr_val
;
2454 int avg_wire_size
= 0;
2455 struct igb_adapter
*adapter
= rx_ring
->adapter
;
2457 if (!rx_ring
->total_packets
)
2458 goto clear_counts
; /* no packets, so don't do anything */
2460 /* For non-gigabit speeds, just fix the interrupt rate at 4000
2461 * ints/sec - ITR timer value of 120 ticks.
2463 if (adapter
->link_speed
!= SPEED_1000
) {
2467 avg_wire_size
= rx_ring
->total_bytes
/ rx_ring
->total_packets
;
2469 /* Add 24 bytes to size to account for CRC, preamble, and gap */
2470 avg_wire_size
+= 24;
2472 /* Don't starve jumbo frames */
2473 avg_wire_size
= min(avg_wire_size
, 3000);
2475 /* Give a little boost to mid-size frames */
2476 if ((avg_wire_size
> 300) && (avg_wire_size
< 1200))
2477 new_val
= avg_wire_size
/ 3;
2479 new_val
= avg_wire_size
/ 2;
2482 if (new_val
!= rx_ring
->itr_val
) {
2483 rx_ring
->itr_val
= new_val
;
2484 rx_ring
->set_itr
= 1;
2487 rx_ring
->total_bytes
= 0;
2488 rx_ring
->total_packets
= 0;
2492 * igb_update_itr - update the dynamic ITR value based on statistics
2493 * Stores a new ITR value based on packets and byte
2494 * counts during the last interrupt. The advantage of per interrupt
2495 * computation is faster updates and more accurate ITR for the current
2496 * traffic pattern. Constants in this function were computed
2497 * based on theoretical maximum wire speed and thresholds were set based
2498 * on testing data as well as attempting to minimize response time
2499 * while increasing bulk throughput.
2500 * this functionality is controlled by the InterruptThrottleRate module
2501 * parameter (see igb_param.c)
2502 * NOTE: These calculations are only valid when operating in a single-
2503 * queue environment.
2504 * @adapter: pointer to adapter
2505 * @itr_setting: current adapter->itr
2506 * @packets: the number of packets during this measurement interval
2507 * @bytes: the number of bytes during this measurement interval
2509 static unsigned int igb_update_itr(struct igb_adapter
*adapter
, u16 itr_setting
,
2510 int packets
, int bytes
)
2512 unsigned int retval
= itr_setting
;
2515 goto update_itr_done
;
2517 switch (itr_setting
) {
2518 case lowest_latency
:
2519 /* handle TSO and jumbo frames */
2520 if (bytes
/packets
> 8000)
2521 retval
= bulk_latency
;
2522 else if ((packets
< 5) && (bytes
> 512))
2523 retval
= low_latency
;
2525 case low_latency
: /* 50 usec aka 20000 ints/s */
2526 if (bytes
> 10000) {
2527 /* this if handles the TSO accounting */
2528 if (bytes
/packets
> 8000) {
2529 retval
= bulk_latency
;
2530 } else if ((packets
< 10) || ((bytes
/packets
) > 1200)) {
2531 retval
= bulk_latency
;
2532 } else if ((packets
> 35)) {
2533 retval
= lowest_latency
;
2535 } else if (bytes
/packets
> 2000) {
2536 retval
= bulk_latency
;
2537 } else if (packets
<= 2 && bytes
< 512) {
2538 retval
= lowest_latency
;
2541 case bulk_latency
: /* 250 usec aka 4000 ints/s */
2542 if (bytes
> 25000) {
2544 retval
= low_latency
;
2545 } else if (bytes
< 6000) {
2546 retval
= low_latency
;
2555 static void igb_set_itr(struct igb_adapter
*adapter
)
2558 u32 new_itr
= adapter
->itr
;
2560 /* for non-gigabit speeds, just fix the interrupt rate at 4000 */
2561 if (adapter
->link_speed
!= SPEED_1000
) {
2567 adapter
->rx_itr
= igb_update_itr(adapter
,
2569 adapter
->rx_ring
->total_packets
,
2570 adapter
->rx_ring
->total_bytes
);
2572 if (adapter
->rx_ring
->buddy
) {
2573 adapter
->tx_itr
= igb_update_itr(adapter
,
2575 adapter
->tx_ring
->total_packets
,
2576 adapter
->tx_ring
->total_bytes
);
2578 current_itr
= max(adapter
->rx_itr
, adapter
->tx_itr
);
2580 current_itr
= adapter
->rx_itr
;
2583 /* conservative mode (itr 3) eliminates the lowest_latency setting */
2584 if (adapter
->itr_setting
== 3 &&
2585 current_itr
== lowest_latency
)
2586 current_itr
= low_latency
;
2588 switch (current_itr
) {
2589 /* counts and packets in update_itr are dependent on these numbers */
2590 case lowest_latency
:
2594 new_itr
= 20000; /* aka hwitr = ~200 */
2604 adapter
->rx_ring
->total_bytes
= 0;
2605 adapter
->rx_ring
->total_packets
= 0;
2606 if (adapter
->rx_ring
->buddy
) {
2607 adapter
->rx_ring
->buddy
->total_bytes
= 0;
2608 adapter
->rx_ring
->buddy
->total_packets
= 0;
2611 if (new_itr
!= adapter
->itr
) {
2612 /* this attempts to bias the interrupt rate towards Bulk
2613 * by adding intermediate steps when interrupt rate is
2615 new_itr
= new_itr
> adapter
->itr
?
2616 min(adapter
->itr
+ (new_itr
>> 2), new_itr
) :
2618 /* Don't write the value here; it resets the adapter's
2619 * internal timer, and causes us to delay far longer than
2620 * we should between interrupts. Instead, we write the ITR
2621 * value at the beginning of the next interrupt so the timing
2622 * ends up being correct.
2624 adapter
->itr
= new_itr
;
2625 adapter
->rx_ring
->itr_val
= 1000000000 / (new_itr
* 256);
2626 adapter
->rx_ring
->set_itr
= 1;
2633 #define IGB_TX_FLAGS_CSUM 0x00000001
2634 #define IGB_TX_FLAGS_VLAN 0x00000002
2635 #define IGB_TX_FLAGS_TSO 0x00000004
2636 #define IGB_TX_FLAGS_IPV4 0x00000008
2637 #define IGB_TX_FLAGS_VLAN_MASK 0xffff0000
2638 #define IGB_TX_FLAGS_VLAN_SHIFT 16
2640 static inline int igb_tso_adv(struct igb_adapter
*adapter
,
2641 struct igb_ring
*tx_ring
,
2642 struct sk_buff
*skb
, u32 tx_flags
, u8
*hdr_len
)
2644 struct e1000_adv_tx_context_desc
*context_desc
;
2647 struct igb_buffer
*buffer_info
;
2648 u32 info
= 0, tu_cmd
= 0;
2649 u32 mss_l4len_idx
, l4len
;
2652 if (skb_header_cloned(skb
)) {
2653 err
= pskb_expand_head(skb
, 0, 0, GFP_ATOMIC
);
2658 l4len
= tcp_hdrlen(skb
);
2661 if (skb
->protocol
== htons(ETH_P_IP
)) {
2662 struct iphdr
*iph
= ip_hdr(skb
);
2665 tcp_hdr(skb
)->check
= ~csum_tcpudp_magic(iph
->saddr
,
2669 } else if (skb_shinfo(skb
)->gso_type
== SKB_GSO_TCPV6
) {
2670 ipv6_hdr(skb
)->payload_len
= 0;
2671 tcp_hdr(skb
)->check
= ~csum_ipv6_magic(&ipv6_hdr(skb
)->saddr
,
2672 &ipv6_hdr(skb
)->daddr
,
2676 i
= tx_ring
->next_to_use
;
2678 buffer_info
= &tx_ring
->buffer_info
[i
];
2679 context_desc
= E1000_TX_CTXTDESC_ADV(*tx_ring
, i
);
2680 /* VLAN MACLEN IPLEN */
2681 if (tx_flags
& IGB_TX_FLAGS_VLAN
)
2682 info
|= (tx_flags
& IGB_TX_FLAGS_VLAN_MASK
);
2683 info
|= (skb_network_offset(skb
) << E1000_ADVTXD_MACLEN_SHIFT
);
2684 *hdr_len
+= skb_network_offset(skb
);
2685 info
|= skb_network_header_len(skb
);
2686 *hdr_len
+= skb_network_header_len(skb
);
2687 context_desc
->vlan_macip_lens
= cpu_to_le32(info
);
2689 /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */
2690 tu_cmd
|= (E1000_TXD_CMD_DEXT
| E1000_ADVTXD_DTYP_CTXT
);
2692 if (skb
->protocol
== htons(ETH_P_IP
))
2693 tu_cmd
|= E1000_ADVTXD_TUCMD_IPV4
;
2694 tu_cmd
|= E1000_ADVTXD_TUCMD_L4T_TCP
;
2696 context_desc
->type_tucmd_mlhl
= cpu_to_le32(tu_cmd
);
2699 mss_l4len_idx
= (skb_shinfo(skb
)->gso_size
<< E1000_ADVTXD_MSS_SHIFT
);
2700 mss_l4len_idx
|= (l4len
<< E1000_ADVTXD_L4LEN_SHIFT
);
2702 /* Context index must be unique per ring. */
2703 if (adapter
->flags
& IGB_FLAG_NEED_CTX_IDX
)
2704 mss_l4len_idx
|= tx_ring
->queue_index
<< 4;
2706 context_desc
->mss_l4len_idx
= cpu_to_le32(mss_l4len_idx
);
2707 context_desc
->seqnum_seed
= 0;
2709 buffer_info
->time_stamp
= jiffies
;
2710 buffer_info
->dma
= 0;
2712 if (i
== tx_ring
->count
)
2715 tx_ring
->next_to_use
= i
;
2720 static inline bool igb_tx_csum_adv(struct igb_adapter
*adapter
,
2721 struct igb_ring
*tx_ring
,
2722 struct sk_buff
*skb
, u32 tx_flags
)
2724 struct e1000_adv_tx_context_desc
*context_desc
;
2726 struct igb_buffer
*buffer_info
;
2727 u32 info
= 0, tu_cmd
= 0;
2729 if ((skb
->ip_summed
== CHECKSUM_PARTIAL
) ||
2730 (tx_flags
& IGB_TX_FLAGS_VLAN
)) {
2731 i
= tx_ring
->next_to_use
;
2732 buffer_info
= &tx_ring
->buffer_info
[i
];
2733 context_desc
= E1000_TX_CTXTDESC_ADV(*tx_ring
, i
);
2735 if (tx_flags
& IGB_TX_FLAGS_VLAN
)
2736 info
|= (tx_flags
& IGB_TX_FLAGS_VLAN_MASK
);
2737 info
|= (skb_network_offset(skb
) << E1000_ADVTXD_MACLEN_SHIFT
);
2738 if (skb
->ip_summed
== CHECKSUM_PARTIAL
)
2739 info
|= skb_network_header_len(skb
);
2741 context_desc
->vlan_macip_lens
= cpu_to_le32(info
);
2743 tu_cmd
|= (E1000_TXD_CMD_DEXT
| E1000_ADVTXD_DTYP_CTXT
);
2745 if (skb
->ip_summed
== CHECKSUM_PARTIAL
) {
2746 switch (skb
->protocol
) {
2747 case __constant_htons(ETH_P_IP
):
2748 tu_cmd
|= E1000_ADVTXD_TUCMD_IPV4
;
2749 if (ip_hdr(skb
)->protocol
== IPPROTO_TCP
)
2750 tu_cmd
|= E1000_ADVTXD_TUCMD_L4T_TCP
;
2752 case __constant_htons(ETH_P_IPV6
):
2753 /* XXX what about other V6 headers?? */
2754 if (ipv6_hdr(skb
)->nexthdr
== IPPROTO_TCP
)
2755 tu_cmd
|= E1000_ADVTXD_TUCMD_L4T_TCP
;
2758 if (unlikely(net_ratelimit()))
2759 dev_warn(&adapter
->pdev
->dev
,
2760 "partial checksum but proto=%x!\n",
2766 context_desc
->type_tucmd_mlhl
= cpu_to_le32(tu_cmd
);
2767 context_desc
->seqnum_seed
= 0;
2768 if (adapter
->flags
& IGB_FLAG_NEED_CTX_IDX
)
2769 context_desc
->mss_l4len_idx
=
2770 cpu_to_le32(tx_ring
->queue_index
<< 4);
2772 buffer_info
->time_stamp
= jiffies
;
2773 buffer_info
->dma
= 0;
2776 if (i
== tx_ring
->count
)
2778 tx_ring
->next_to_use
= i
;
2787 #define IGB_MAX_TXD_PWR 16
2788 #define IGB_MAX_DATA_PER_TXD (1<<IGB_MAX_TXD_PWR)
2790 static inline int igb_tx_map_adv(struct igb_adapter
*adapter
,
2791 struct igb_ring
*tx_ring
,
2792 struct sk_buff
*skb
)
2794 struct igb_buffer
*buffer_info
;
2795 unsigned int len
= skb_headlen(skb
);
2796 unsigned int count
= 0, i
;
2799 i
= tx_ring
->next_to_use
;
2801 buffer_info
= &tx_ring
->buffer_info
[i
];
2802 BUG_ON(len
>= IGB_MAX_DATA_PER_TXD
);
2803 buffer_info
->length
= len
;
2804 /* set time_stamp *before* dma to help avoid a possible race */
2805 buffer_info
->time_stamp
= jiffies
;
2806 buffer_info
->dma
= pci_map_single(adapter
->pdev
, skb
->data
, len
,
2810 if (i
== tx_ring
->count
)
2813 for (f
= 0; f
< skb_shinfo(skb
)->nr_frags
; f
++) {
2814 struct skb_frag_struct
*frag
;
2816 frag
= &skb_shinfo(skb
)->frags
[f
];
2819 buffer_info
= &tx_ring
->buffer_info
[i
];
2820 BUG_ON(len
>= IGB_MAX_DATA_PER_TXD
);
2821 buffer_info
->length
= len
;
2822 buffer_info
->time_stamp
= jiffies
;
2823 buffer_info
->dma
= pci_map_page(adapter
->pdev
,
2831 if (i
== tx_ring
->count
)
2835 i
= (i
== 0) ? tx_ring
->count
- 1 : i
- 1;
2836 tx_ring
->buffer_info
[i
].skb
= skb
;
2841 static inline void igb_tx_queue_adv(struct igb_adapter
*adapter
,
2842 struct igb_ring
*tx_ring
,
2843 int tx_flags
, int count
, u32 paylen
,
2846 union e1000_adv_tx_desc
*tx_desc
= NULL
;
2847 struct igb_buffer
*buffer_info
;
2848 u32 olinfo_status
= 0, cmd_type_len
;
2851 cmd_type_len
= (E1000_ADVTXD_DTYP_DATA
| E1000_ADVTXD_DCMD_IFCS
|
2852 E1000_ADVTXD_DCMD_DEXT
);
2854 if (tx_flags
& IGB_TX_FLAGS_VLAN
)
2855 cmd_type_len
|= E1000_ADVTXD_DCMD_VLE
;
2857 if (tx_flags
& IGB_TX_FLAGS_TSO
) {
2858 cmd_type_len
|= E1000_ADVTXD_DCMD_TSE
;
2860 /* insert tcp checksum */
2861 olinfo_status
|= E1000_TXD_POPTS_TXSM
<< 8;
2863 /* insert ip checksum */
2864 if (tx_flags
& IGB_TX_FLAGS_IPV4
)
2865 olinfo_status
|= E1000_TXD_POPTS_IXSM
<< 8;
2867 } else if (tx_flags
& IGB_TX_FLAGS_CSUM
) {
2868 olinfo_status
|= E1000_TXD_POPTS_TXSM
<< 8;
2871 if ((adapter
->flags
& IGB_FLAG_NEED_CTX_IDX
) &&
2872 (tx_flags
& (IGB_TX_FLAGS_CSUM
| IGB_TX_FLAGS_TSO
|
2873 IGB_TX_FLAGS_VLAN
)))
2874 olinfo_status
|= tx_ring
->queue_index
<< 4;
2876 olinfo_status
|= ((paylen
- hdr_len
) << E1000_ADVTXD_PAYLEN_SHIFT
);
2878 i
= tx_ring
->next_to_use
;
2880 buffer_info
= &tx_ring
->buffer_info
[i
];
2881 tx_desc
= E1000_TX_DESC_ADV(*tx_ring
, i
);
2882 tx_desc
->read
.buffer_addr
= cpu_to_le64(buffer_info
->dma
);
2883 tx_desc
->read
.cmd_type_len
=
2884 cpu_to_le32(cmd_type_len
| buffer_info
->length
);
2885 tx_desc
->read
.olinfo_status
= cpu_to_le32(olinfo_status
);
2887 if (i
== tx_ring
->count
)
2891 tx_desc
->read
.cmd_type_len
|= cpu_to_le32(adapter
->txd_cmd
);
2892 /* Force memory writes to complete before letting h/w
2893 * know there are new descriptors to fetch. (Only
2894 * applicable for weak-ordered memory model archs,
2895 * such as IA-64). */
2898 tx_ring
->next_to_use
= i
;
2899 writel(i
, adapter
->hw
.hw_addr
+ tx_ring
->tail
);
2900 /* we need this if more than one processor can write to our tail
2901 * at a time, it syncronizes IO on IA64/Altix systems */
2905 static int __igb_maybe_stop_tx(struct net_device
*netdev
,
2906 struct igb_ring
*tx_ring
, int size
)
2908 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2910 netif_stop_subqueue(netdev
, tx_ring
->queue_index
);
2912 /* Herbert's original patch had:
2913 * smp_mb__after_netif_stop_queue();
2914 * but since that doesn't exist yet, just open code it. */
2917 /* We need to check again in a case another CPU has just
2918 * made room available. */
2919 if (IGB_DESC_UNUSED(tx_ring
) < size
)
2923 netif_wake_subqueue(netdev
, tx_ring
->queue_index
);
2924 ++adapter
->restart_queue
;
2928 static int igb_maybe_stop_tx(struct net_device
*netdev
,
2929 struct igb_ring
*tx_ring
, int size
)
2931 if (IGB_DESC_UNUSED(tx_ring
) >= size
)
2933 return __igb_maybe_stop_tx(netdev
, tx_ring
, size
);
2936 #define TXD_USE_COUNT(S) (((S) >> (IGB_MAX_TXD_PWR)) + 1)
2938 static int igb_xmit_frame_ring_adv(struct sk_buff
*skb
,
2939 struct net_device
*netdev
,
2940 struct igb_ring
*tx_ring
)
2942 struct igb_adapter
*adapter
= netdev_priv(netdev
);
2943 unsigned int tx_flags
= 0;
2948 len
= skb_headlen(skb
);
2950 if (test_bit(__IGB_DOWN
, &adapter
->state
)) {
2951 dev_kfree_skb_any(skb
);
2952 return NETDEV_TX_OK
;
2955 if (skb
->len
<= 0) {
2956 dev_kfree_skb_any(skb
);
2957 return NETDEV_TX_OK
;
2960 /* need: 1 descriptor per page,
2961 * + 2 desc gap to keep tail from touching head,
2962 * + 1 desc for skb->data,
2963 * + 1 desc for context descriptor,
2964 * otherwise try next time */
2965 if (igb_maybe_stop_tx(netdev
, tx_ring
, skb_shinfo(skb
)->nr_frags
+ 4)) {
2966 /* this is a hard error */
2967 return NETDEV_TX_BUSY
;
2971 if (adapter
->vlgrp
&& vlan_tx_tag_present(skb
)) {
2972 tx_flags
|= IGB_TX_FLAGS_VLAN
;
2973 tx_flags
|= (vlan_tx_tag_get(skb
) << IGB_TX_FLAGS_VLAN_SHIFT
);
2976 if (skb
->protocol
== htons(ETH_P_IP
))
2977 tx_flags
|= IGB_TX_FLAGS_IPV4
;
2979 tso
= skb_is_gso(skb
) ? igb_tso_adv(adapter
, tx_ring
, skb
, tx_flags
,
2983 dev_kfree_skb_any(skb
);
2984 return NETDEV_TX_OK
;
2988 tx_flags
|= IGB_TX_FLAGS_TSO
;
2989 else if (igb_tx_csum_adv(adapter
, tx_ring
, skb
, tx_flags
))
2990 if (skb
->ip_summed
== CHECKSUM_PARTIAL
)
2991 tx_flags
|= IGB_TX_FLAGS_CSUM
;
2993 igb_tx_queue_adv(adapter
, tx_ring
, tx_flags
,
2994 igb_tx_map_adv(adapter
, tx_ring
, skb
),
2997 netdev
->trans_start
= jiffies
;
2999 /* Make sure there is space in the ring for the next send. */
3000 igb_maybe_stop_tx(netdev
, tx_ring
, MAX_SKB_FRAGS
+ 4);
3002 return NETDEV_TX_OK
;
3005 static int igb_xmit_frame_adv(struct sk_buff
*skb
, struct net_device
*netdev
)
3007 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3008 struct igb_ring
*tx_ring
;
3011 r_idx
= skb
->queue_mapping
& (IGB_MAX_TX_QUEUES
- 1);
3012 tx_ring
= adapter
->multi_tx_table
[r_idx
];
3014 /* This goes back to the question of how to logically map a tx queue
3015 * to a flow. Right now, performance is impacted slightly negatively
3016 * if using multiple tx queues. If the stack breaks away from a
3017 * single qdisc implementation, we can look at this again. */
3018 return (igb_xmit_frame_ring_adv(skb
, netdev
, tx_ring
));
3022 * igb_tx_timeout - Respond to a Tx Hang
3023 * @netdev: network interface device structure
3025 static void igb_tx_timeout(struct net_device
*netdev
)
3027 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3028 struct e1000_hw
*hw
= &adapter
->hw
;
3030 /* Do the reset outside of interrupt context */
3031 adapter
->tx_timeout_count
++;
3032 schedule_work(&adapter
->reset_task
);
3033 wr32(E1000_EICS
, adapter
->eims_enable_mask
&
3034 ~(E1000_EIMS_TCP_TIMER
| E1000_EIMS_OTHER
));
3037 static void igb_reset_task(struct work_struct
*work
)
3039 struct igb_adapter
*adapter
;
3040 adapter
= container_of(work
, struct igb_adapter
, reset_task
);
3042 igb_reinit_locked(adapter
);
3046 * igb_get_stats - Get System Network Statistics
3047 * @netdev: network interface device structure
3049 * Returns the address of the device statistics structure.
3050 * The statistics are actually updated from the timer callback.
3052 static struct net_device_stats
*
3053 igb_get_stats(struct net_device
*netdev
)
3055 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3057 /* only return the current stats */
3058 return &adapter
->net_stats
;
3062 * igb_change_mtu - Change the Maximum Transfer Unit
3063 * @netdev: network interface device structure
3064 * @new_mtu: new value for maximum frame size
3066 * Returns 0 on success, negative on failure
3068 static int igb_change_mtu(struct net_device
*netdev
, int new_mtu
)
3070 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3071 int max_frame
= new_mtu
+ ETH_HLEN
+ ETH_FCS_LEN
;
3073 if ((max_frame
< ETH_ZLEN
+ ETH_FCS_LEN
) ||
3074 (max_frame
> MAX_JUMBO_FRAME_SIZE
)) {
3075 dev_err(&adapter
->pdev
->dev
, "Invalid MTU setting\n");
3079 #define MAX_STD_JUMBO_FRAME_SIZE 9234
3080 if (max_frame
> MAX_STD_JUMBO_FRAME_SIZE
) {
3081 dev_err(&adapter
->pdev
->dev
, "MTU > 9216 not supported.\n");
3085 while (test_and_set_bit(__IGB_RESETTING
, &adapter
->state
))
3087 /* igb_down has a dependency on max_frame_size */
3088 adapter
->max_frame_size
= max_frame
;
3089 if (netif_running(netdev
))
3092 /* NOTE: netdev_alloc_skb reserves 16 bytes, and typically NET_IP_ALIGN
3093 * means we reserve 2 more, this pushes us to allocate from the next
3095 * i.e. RXBUFFER_2048 --> size-4096 slab
3098 if (max_frame
<= IGB_RXBUFFER_256
)
3099 adapter
->rx_buffer_len
= IGB_RXBUFFER_256
;
3100 else if (max_frame
<= IGB_RXBUFFER_512
)
3101 adapter
->rx_buffer_len
= IGB_RXBUFFER_512
;
3102 else if (max_frame
<= IGB_RXBUFFER_1024
)
3103 adapter
->rx_buffer_len
= IGB_RXBUFFER_1024
;
3104 else if (max_frame
<= IGB_RXBUFFER_2048
)
3105 adapter
->rx_buffer_len
= IGB_RXBUFFER_2048
;
3107 #if (PAGE_SIZE / 2) > IGB_RXBUFFER_16384
3108 adapter
->rx_buffer_len
= IGB_RXBUFFER_16384
;
3110 adapter
->rx_buffer_len
= PAGE_SIZE
/ 2;
3112 /* adjust allocation if LPE protects us, and we aren't using SBP */
3113 if ((max_frame
== ETH_FRAME_LEN
+ ETH_FCS_LEN
) ||
3114 (max_frame
== MAXIMUM_ETHERNET_VLAN_SIZE
))
3115 adapter
->rx_buffer_len
= MAXIMUM_ETHERNET_VLAN_SIZE
;
3117 dev_info(&adapter
->pdev
->dev
, "changing MTU from %d to %d\n",
3118 netdev
->mtu
, new_mtu
);
3119 netdev
->mtu
= new_mtu
;
3121 if (netif_running(netdev
))
3126 clear_bit(__IGB_RESETTING
, &adapter
->state
);
3132 * igb_update_stats - Update the board statistics counters
3133 * @adapter: board private structure
3136 void igb_update_stats(struct igb_adapter
*adapter
)
3138 struct e1000_hw
*hw
= &adapter
->hw
;
3139 struct pci_dev
*pdev
= adapter
->pdev
;
3142 #define PHY_IDLE_ERROR_COUNT_MASK 0x00FF
3145 * Prevent stats update while adapter is being reset, or if the pci
3146 * connection is down.
3148 if (adapter
->link_speed
== 0)
3150 if (pci_channel_offline(pdev
))
3153 adapter
->stats
.crcerrs
+= rd32(E1000_CRCERRS
);
3154 adapter
->stats
.gprc
+= rd32(E1000_GPRC
);
3155 adapter
->stats
.gorc
+= rd32(E1000_GORCL
);
3156 rd32(E1000_GORCH
); /* clear GORCL */
3157 adapter
->stats
.bprc
+= rd32(E1000_BPRC
);
3158 adapter
->stats
.mprc
+= rd32(E1000_MPRC
);
3159 adapter
->stats
.roc
+= rd32(E1000_ROC
);
3161 adapter
->stats
.prc64
+= rd32(E1000_PRC64
);
3162 adapter
->stats
.prc127
+= rd32(E1000_PRC127
);
3163 adapter
->stats
.prc255
+= rd32(E1000_PRC255
);
3164 adapter
->stats
.prc511
+= rd32(E1000_PRC511
);
3165 adapter
->stats
.prc1023
+= rd32(E1000_PRC1023
);
3166 adapter
->stats
.prc1522
+= rd32(E1000_PRC1522
);
3167 adapter
->stats
.symerrs
+= rd32(E1000_SYMERRS
);
3168 adapter
->stats
.sec
+= rd32(E1000_SEC
);
3170 adapter
->stats
.mpc
+= rd32(E1000_MPC
);
3171 adapter
->stats
.scc
+= rd32(E1000_SCC
);
3172 adapter
->stats
.ecol
+= rd32(E1000_ECOL
);
3173 adapter
->stats
.mcc
+= rd32(E1000_MCC
);
3174 adapter
->stats
.latecol
+= rd32(E1000_LATECOL
);
3175 adapter
->stats
.dc
+= rd32(E1000_DC
);
3176 adapter
->stats
.rlec
+= rd32(E1000_RLEC
);
3177 adapter
->stats
.xonrxc
+= rd32(E1000_XONRXC
);
3178 adapter
->stats
.xontxc
+= rd32(E1000_XONTXC
);
3179 adapter
->stats
.xoffrxc
+= rd32(E1000_XOFFRXC
);
3180 adapter
->stats
.xofftxc
+= rd32(E1000_XOFFTXC
);
3181 adapter
->stats
.fcruc
+= rd32(E1000_FCRUC
);
3182 adapter
->stats
.gptc
+= rd32(E1000_GPTC
);
3183 adapter
->stats
.gotc
+= rd32(E1000_GOTCL
);
3184 rd32(E1000_GOTCH
); /* clear GOTCL */
3185 adapter
->stats
.rnbc
+= rd32(E1000_RNBC
);
3186 adapter
->stats
.ruc
+= rd32(E1000_RUC
);
3187 adapter
->stats
.rfc
+= rd32(E1000_RFC
);
3188 adapter
->stats
.rjc
+= rd32(E1000_RJC
);
3189 adapter
->stats
.tor
+= rd32(E1000_TORH
);
3190 adapter
->stats
.tot
+= rd32(E1000_TOTH
);
3191 adapter
->stats
.tpr
+= rd32(E1000_TPR
);
3193 adapter
->stats
.ptc64
+= rd32(E1000_PTC64
);
3194 adapter
->stats
.ptc127
+= rd32(E1000_PTC127
);
3195 adapter
->stats
.ptc255
+= rd32(E1000_PTC255
);
3196 adapter
->stats
.ptc511
+= rd32(E1000_PTC511
);
3197 adapter
->stats
.ptc1023
+= rd32(E1000_PTC1023
);
3198 adapter
->stats
.ptc1522
+= rd32(E1000_PTC1522
);
3200 adapter
->stats
.mptc
+= rd32(E1000_MPTC
);
3201 adapter
->stats
.bptc
+= rd32(E1000_BPTC
);
3203 /* used for adaptive IFS */
3205 hw
->mac
.tx_packet_delta
= rd32(E1000_TPT
);
3206 adapter
->stats
.tpt
+= hw
->mac
.tx_packet_delta
;
3207 hw
->mac
.collision_delta
= rd32(E1000_COLC
);
3208 adapter
->stats
.colc
+= hw
->mac
.collision_delta
;
3210 adapter
->stats
.algnerrc
+= rd32(E1000_ALGNERRC
);
3211 adapter
->stats
.rxerrc
+= rd32(E1000_RXERRC
);
3212 adapter
->stats
.tncrs
+= rd32(E1000_TNCRS
);
3213 adapter
->stats
.tsctc
+= rd32(E1000_TSCTC
);
3214 adapter
->stats
.tsctfc
+= rd32(E1000_TSCTFC
);
3216 adapter
->stats
.iac
+= rd32(E1000_IAC
);
3217 adapter
->stats
.icrxoc
+= rd32(E1000_ICRXOC
);
3218 adapter
->stats
.icrxptc
+= rd32(E1000_ICRXPTC
);
3219 adapter
->stats
.icrxatc
+= rd32(E1000_ICRXATC
);
3220 adapter
->stats
.ictxptc
+= rd32(E1000_ICTXPTC
);
3221 adapter
->stats
.ictxatc
+= rd32(E1000_ICTXATC
);
3222 adapter
->stats
.ictxqec
+= rd32(E1000_ICTXQEC
);
3223 adapter
->stats
.ictxqmtc
+= rd32(E1000_ICTXQMTC
);
3224 adapter
->stats
.icrxdmtc
+= rd32(E1000_ICRXDMTC
);
3226 /* Fill out the OS statistics structure */
3227 adapter
->net_stats
.multicast
= adapter
->stats
.mprc
;
3228 adapter
->net_stats
.collisions
= adapter
->stats
.colc
;
3232 /* RLEC on some newer hardware can be incorrect so build
3233 * our own version based on RUC and ROC */
3234 adapter
->net_stats
.rx_errors
= adapter
->stats
.rxerrc
+
3235 adapter
->stats
.crcerrs
+ adapter
->stats
.algnerrc
+
3236 adapter
->stats
.ruc
+ adapter
->stats
.roc
+
3237 adapter
->stats
.cexterr
;
3238 adapter
->net_stats
.rx_length_errors
= adapter
->stats
.ruc
+
3240 adapter
->net_stats
.rx_crc_errors
= adapter
->stats
.crcerrs
;
3241 adapter
->net_stats
.rx_frame_errors
= adapter
->stats
.algnerrc
;
3242 adapter
->net_stats
.rx_missed_errors
= adapter
->stats
.mpc
;
3245 adapter
->net_stats
.tx_errors
= adapter
->stats
.ecol
+
3246 adapter
->stats
.latecol
;
3247 adapter
->net_stats
.tx_aborted_errors
= adapter
->stats
.ecol
;
3248 adapter
->net_stats
.tx_window_errors
= adapter
->stats
.latecol
;
3249 adapter
->net_stats
.tx_carrier_errors
= adapter
->stats
.tncrs
;
3251 /* Tx Dropped needs to be maintained elsewhere */
3254 if (hw
->phy
.media_type
== e1000_media_type_copper
) {
3255 if ((adapter
->link_speed
== SPEED_1000
) &&
3256 (!hw
->phy
.ops
.read_phy_reg(hw
, PHY_1000T_STATUS
,
3258 phy_tmp
&= PHY_IDLE_ERROR_COUNT_MASK
;
3259 adapter
->phy_stats
.idle_errors
+= phy_tmp
;
3263 /* Management Stats */
3264 adapter
->stats
.mgptc
+= rd32(E1000_MGTPTC
);
3265 adapter
->stats
.mgprc
+= rd32(E1000_MGTPRC
);
3266 adapter
->stats
.mgpdc
+= rd32(E1000_MGTPDC
);
3270 static irqreturn_t
igb_msix_other(int irq
, void *data
)
3272 struct net_device
*netdev
= data
;
3273 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3274 struct e1000_hw
*hw
= &adapter
->hw
;
3275 u32 icr
= rd32(E1000_ICR
);
3277 /* reading ICR causes bit 31 of EICR to be cleared */
3278 if (!(icr
& E1000_ICR_LSC
))
3279 goto no_link_interrupt
;
3280 hw
->mac
.get_link_status
= 1;
3281 /* guard against interrupt when we're going down */
3282 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
3283 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
3286 wr32(E1000_IMS
, E1000_IMS_LSC
);
3287 wr32(E1000_EIMS
, adapter
->eims_other
);
3292 static irqreturn_t
igb_msix_tx(int irq
, void *data
)
3294 struct igb_ring
*tx_ring
= data
;
3295 struct igb_adapter
*adapter
= tx_ring
->adapter
;
3296 struct e1000_hw
*hw
= &adapter
->hw
;
3298 #ifdef CONFIG_IGB_DCA
3299 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
)
3300 igb_update_tx_dca(tx_ring
);
3302 tx_ring
->total_bytes
= 0;
3303 tx_ring
->total_packets
= 0;
3305 /* auto mask will automatically reenable the interrupt when we write
3307 if (!igb_clean_tx_irq(tx_ring
))
3308 /* Ring was not completely cleaned, so fire another interrupt */
3309 wr32(E1000_EICS
, tx_ring
->eims_value
);
3311 wr32(E1000_EIMS
, tx_ring
->eims_value
);
3316 static void igb_write_itr(struct igb_ring
*ring
)
3318 struct e1000_hw
*hw
= &ring
->adapter
->hw
;
3319 if ((ring
->adapter
->itr_setting
& 3) && ring
->set_itr
) {
3320 switch (hw
->mac
.type
) {
3322 wr32(ring
->itr_register
,
3327 wr32(ring
->itr_register
,
3329 (ring
->itr_val
<< 16));
3336 static irqreturn_t
igb_msix_rx(int irq
, void *data
)
3338 struct igb_ring
*rx_ring
= data
;
3339 struct igb_adapter
*adapter
= rx_ring
->adapter
;
3341 /* Write the ITR value calculated at the end of the
3342 * previous interrupt.
3345 igb_write_itr(rx_ring
);
3347 if (netif_rx_schedule_prep(adapter
->netdev
, &rx_ring
->napi
))
3348 __netif_rx_schedule(adapter
->netdev
, &rx_ring
->napi
);
3350 #ifdef CONFIG_IGB_DCA
3351 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
)
3352 igb_update_rx_dca(rx_ring
);
3357 #ifdef CONFIG_IGB_DCA
3358 static void igb_update_rx_dca(struct igb_ring
*rx_ring
)
3361 struct igb_adapter
*adapter
= rx_ring
->adapter
;
3362 struct e1000_hw
*hw
= &adapter
->hw
;
3363 int cpu
= get_cpu();
3364 int q
= rx_ring
- adapter
->rx_ring
;
3366 if (rx_ring
->cpu
!= cpu
) {
3367 dca_rxctrl
= rd32(E1000_DCA_RXCTRL(q
));
3368 if (hw
->mac
.type
== e1000_82576
) {
3369 dca_rxctrl
&= ~E1000_DCA_RXCTRL_CPUID_MASK_82576
;
3370 dca_rxctrl
|= dca_get_tag(cpu
) <<
3371 E1000_DCA_RXCTRL_CPUID_SHIFT
;
3373 dca_rxctrl
&= ~E1000_DCA_RXCTRL_CPUID_MASK
;
3374 dca_rxctrl
|= dca_get_tag(cpu
);
3376 dca_rxctrl
|= E1000_DCA_RXCTRL_DESC_DCA_EN
;
3377 dca_rxctrl
|= E1000_DCA_RXCTRL_HEAD_DCA_EN
;
3378 dca_rxctrl
|= E1000_DCA_RXCTRL_DATA_DCA_EN
;
3379 wr32(E1000_DCA_RXCTRL(q
), dca_rxctrl
);
3385 static void igb_update_tx_dca(struct igb_ring
*tx_ring
)
3388 struct igb_adapter
*adapter
= tx_ring
->adapter
;
3389 struct e1000_hw
*hw
= &adapter
->hw
;
3390 int cpu
= get_cpu();
3391 int q
= tx_ring
- adapter
->tx_ring
;
3393 if (tx_ring
->cpu
!= cpu
) {
3394 dca_txctrl
= rd32(E1000_DCA_TXCTRL(q
));
3395 if (hw
->mac
.type
== e1000_82576
) {
3396 dca_txctrl
&= ~E1000_DCA_TXCTRL_CPUID_MASK_82576
;
3397 dca_txctrl
|= dca_get_tag(cpu
) <<
3398 E1000_DCA_TXCTRL_CPUID_SHIFT
;
3400 dca_txctrl
&= ~E1000_DCA_TXCTRL_CPUID_MASK
;
3401 dca_txctrl
|= dca_get_tag(cpu
);
3403 dca_txctrl
|= E1000_DCA_TXCTRL_DESC_DCA_EN
;
3404 wr32(E1000_DCA_TXCTRL(q
), dca_txctrl
);
3410 static void igb_setup_dca(struct igb_adapter
*adapter
)
3414 if (!(adapter
->flags
& IGB_FLAG_DCA_ENABLED
))
3417 for (i
= 0; i
< adapter
->num_tx_queues
; i
++) {
3418 adapter
->tx_ring
[i
].cpu
= -1;
3419 igb_update_tx_dca(&adapter
->tx_ring
[i
]);
3421 for (i
= 0; i
< adapter
->num_rx_queues
; i
++) {
3422 adapter
->rx_ring
[i
].cpu
= -1;
3423 igb_update_rx_dca(&adapter
->rx_ring
[i
]);
3427 static int __igb_notify_dca(struct device
*dev
, void *data
)
3429 struct net_device
*netdev
= dev_get_drvdata(dev
);
3430 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3431 struct e1000_hw
*hw
= &adapter
->hw
;
3432 unsigned long event
= *(unsigned long *)data
;
3434 if (!(adapter
->flags
& IGB_FLAG_HAS_DCA
))
3438 case DCA_PROVIDER_ADD
:
3439 /* if already enabled, don't do it again */
3440 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
)
3442 adapter
->flags
|= IGB_FLAG_DCA_ENABLED
;
3443 /* Always use CB2 mode, difference is masked
3444 * in the CB driver. */
3445 wr32(E1000_DCA_CTRL
, 2);
3446 if (dca_add_requester(dev
) == 0) {
3447 dev_info(&adapter
->pdev
->dev
, "DCA enabled\n");
3448 igb_setup_dca(adapter
);
3451 /* Fall Through since DCA is disabled. */
3452 case DCA_PROVIDER_REMOVE
:
3453 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
) {
3454 /* without this a class_device is left
3455 * hanging around in the sysfs model */
3456 dca_remove_requester(dev
);
3457 dev_info(&adapter
->pdev
->dev
, "DCA disabled\n");
3458 adapter
->flags
&= ~IGB_FLAG_DCA_ENABLED
;
3459 wr32(E1000_DCA_CTRL
, 1);
3467 static int igb_notify_dca(struct notifier_block
*nb
, unsigned long event
,
3472 ret_val
= driver_for_each_device(&igb_driver
.driver
, NULL
, &event
,
3475 return ret_val
? NOTIFY_BAD
: NOTIFY_DONE
;
3477 #endif /* CONFIG_IGB_DCA */
3480 * igb_intr_msi - Interrupt Handler
3481 * @irq: interrupt number
3482 * @data: pointer to a network interface device structure
3484 static irqreturn_t
igb_intr_msi(int irq
, void *data
)
3486 struct net_device
*netdev
= data
;
3487 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3488 struct e1000_hw
*hw
= &adapter
->hw
;
3489 /* read ICR disables interrupts using IAM */
3490 u32 icr
= rd32(E1000_ICR
);
3492 igb_write_itr(adapter
->rx_ring
);
3494 if (icr
& (E1000_ICR_RXSEQ
| E1000_ICR_LSC
)) {
3495 hw
->mac
.get_link_status
= 1;
3496 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
3497 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
3500 netif_rx_schedule(netdev
, &adapter
->rx_ring
[0].napi
);
3506 * igb_intr - Interrupt Handler
3507 * @irq: interrupt number
3508 * @data: pointer to a network interface device structure
3510 static irqreturn_t
igb_intr(int irq
, void *data
)
3512 struct net_device
*netdev
= data
;
3513 struct igb_adapter
*adapter
= netdev_priv(netdev
);
3514 struct e1000_hw
*hw
= &adapter
->hw
;
3515 /* Interrupt Auto-Mask...upon reading ICR, interrupts are masked. No
3516 * need for the IMC write */
3517 u32 icr
= rd32(E1000_ICR
);
3520 return IRQ_NONE
; /* Not our interrupt */
3522 igb_write_itr(adapter
->rx_ring
);
3524 /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
3525 * not set, then the adapter didn't send an interrupt */
3526 if (!(icr
& E1000_ICR_INT_ASSERTED
))
3529 eicr
= rd32(E1000_EICR
);
3531 if (icr
& (E1000_ICR_RXSEQ
| E1000_ICR_LSC
)) {
3532 hw
->mac
.get_link_status
= 1;
3533 /* guard against interrupt when we're going down */
3534 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
3535 mod_timer(&adapter
->watchdog_timer
, jiffies
+ 1);
3538 netif_rx_schedule(netdev
, &adapter
->rx_ring
[0].napi
);
3544 * igb_poll - NAPI Rx polling callback
3545 * @napi: napi polling structure
3546 * @budget: count of how many packets we should handle
3548 static int igb_poll(struct napi_struct
*napi
, int budget
)
3550 struct igb_ring
*rx_ring
= container_of(napi
, struct igb_ring
, napi
);
3551 struct igb_adapter
*adapter
= rx_ring
->adapter
;
3552 struct net_device
*netdev
= adapter
->netdev
;
3553 int tx_clean_complete
, work_done
= 0;
3555 /* this poll routine only supports one tx and one rx queue */
3556 #ifdef CONFIG_IGB_DCA
3557 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
)
3558 igb_update_tx_dca(&adapter
->tx_ring
[0]);
3560 tx_clean_complete
= igb_clean_tx_irq(&adapter
->tx_ring
[0]);
3562 #ifdef CONFIG_IGB_DCA
3563 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
)
3564 igb_update_rx_dca(&adapter
->rx_ring
[0]);
3566 igb_clean_rx_irq_adv(&adapter
->rx_ring
[0], &work_done
, budget
);
3568 /* If no Tx and not enough Rx work done, exit the polling mode */
3569 if ((tx_clean_complete
&& (work_done
< budget
)) ||
3570 !netif_running(netdev
)) {
3571 if (adapter
->itr_setting
& 3)
3572 igb_set_itr(adapter
);
3573 netif_rx_complete(netdev
, napi
);
3574 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
3575 igb_irq_enable(adapter
);
3582 static int igb_clean_rx_ring_msix(struct napi_struct
*napi
, int budget
)
3584 struct igb_ring
*rx_ring
= container_of(napi
, struct igb_ring
, napi
);
3585 struct igb_adapter
*adapter
= rx_ring
->adapter
;
3586 struct e1000_hw
*hw
= &adapter
->hw
;
3587 struct net_device
*netdev
= adapter
->netdev
;
3590 #ifdef CONFIG_IGB_DCA
3591 if (adapter
->flags
& IGB_FLAG_DCA_ENABLED
)
3592 igb_update_rx_dca(rx_ring
);
3594 igb_clean_rx_irq_adv(rx_ring
, &work_done
, budget
);
3597 /* If not enough Rx work done, exit the polling mode */
3598 if ((work_done
== 0) || !netif_running(netdev
)) {
3599 netif_rx_complete(netdev
, napi
);
3601 if (adapter
->itr_setting
& 3) {
3602 if (adapter
->num_rx_queues
== 1)
3603 igb_set_itr(adapter
);
3605 igb_update_ring_itr(rx_ring
);
3608 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
3609 wr32(E1000_EIMS
, rx_ring
->eims_value
);
3617 static inline u32
get_head(struct igb_ring
*tx_ring
)
3619 void *end
= (struct e1000_tx_desc
*)tx_ring
->desc
+ tx_ring
->count
;
3620 return le32_to_cpu(*(volatile __le32
*)end
);
3624 * igb_clean_tx_irq - Reclaim resources after transmit completes
3625 * @adapter: board private structure
3626 * returns true if ring is completely cleaned
3628 static bool igb_clean_tx_irq(struct igb_ring
*tx_ring
)
3630 struct igb_adapter
*adapter
= tx_ring
->adapter
;
3631 struct e1000_hw
*hw
= &adapter
->hw
;
3632 struct net_device
*netdev
= adapter
->netdev
;
3633 struct e1000_tx_desc
*tx_desc
;
3634 struct igb_buffer
*buffer_info
;
3635 struct sk_buff
*skb
;
3638 unsigned int count
= 0;
3639 unsigned int total_bytes
= 0, total_packets
= 0;
3643 head
= get_head(tx_ring
);
3644 i
= tx_ring
->next_to_clean
;
3647 tx_desc
= E1000_TX_DESC(*tx_ring
, i
);
3648 buffer_info
= &tx_ring
->buffer_info
[i
];
3649 skb
= buffer_info
->skb
;
3652 unsigned int segs
, bytecount
;
3653 /* gso_segs is currently only valid for tcp */
3654 segs
= skb_shinfo(skb
)->gso_segs
?: 1;
3655 /* multiply data chunks by size of headers */
3656 bytecount
= ((segs
- 1) * skb_headlen(skb
)) +
3658 total_packets
+= segs
;
3659 total_bytes
+= bytecount
;
3662 igb_unmap_and_free_tx_resource(adapter
, buffer_info
);
3665 if (i
== tx_ring
->count
)
3669 if (count
== IGB_MAX_TX_CLEAN
) {
3676 head
= get_head(tx_ring
);
3677 if (head
== oldhead
)
3682 tx_ring
->next_to_clean
= i
;
3684 if (unlikely(count
&&
3685 netif_carrier_ok(netdev
) &&
3686 IGB_DESC_UNUSED(tx_ring
) >= IGB_TX_QUEUE_WAKE
)) {
3687 /* Make sure that anybody stopping the queue after this
3688 * sees the new next_to_clean.
3691 if (__netif_subqueue_stopped(netdev
, tx_ring
->queue_index
) &&
3692 !(test_bit(__IGB_DOWN
, &adapter
->state
))) {
3693 netif_wake_subqueue(netdev
, tx_ring
->queue_index
);
3694 ++adapter
->restart_queue
;
3698 if (tx_ring
->detect_tx_hung
) {
3699 /* Detect a transmit hang in hardware, this serializes the
3700 * check with the clearing of time_stamp and movement of i */
3701 tx_ring
->detect_tx_hung
= false;
3702 if (tx_ring
->buffer_info
[i
].time_stamp
&&
3703 time_after(jiffies
, tx_ring
->buffer_info
[i
].time_stamp
+
3704 (adapter
->tx_timeout_factor
* HZ
))
3705 && !(rd32(E1000_STATUS
) &
3706 E1000_STATUS_TXOFF
)) {
3708 tx_desc
= E1000_TX_DESC(*tx_ring
, i
);
3709 /* detected Tx unit hang */
3710 dev_err(&adapter
->pdev
->dev
,
3711 "Detected Tx Unit Hang\n"
3715 " next_to_use <%x>\n"
3716 " next_to_clean <%x>\n"
3718 "buffer_info[next_to_clean]\n"
3719 " time_stamp <%lx>\n"
3721 " desc.status <%x>\n",
3722 tx_ring
->queue_index
,
3723 readl(adapter
->hw
.hw_addr
+ tx_ring
->head
),
3724 readl(adapter
->hw
.hw_addr
+ tx_ring
->tail
),
3725 tx_ring
->next_to_use
,
3726 tx_ring
->next_to_clean
,
3728 tx_ring
->buffer_info
[i
].time_stamp
,
3730 tx_desc
->upper
.fields
.status
);
3731 netif_stop_subqueue(netdev
, tx_ring
->queue_index
);
3734 tx_ring
->total_bytes
+= total_bytes
;
3735 tx_ring
->total_packets
+= total_packets
;
3736 tx_ring
->tx_stats
.bytes
+= total_bytes
;
3737 tx_ring
->tx_stats
.packets
+= total_packets
;
3738 adapter
->net_stats
.tx_bytes
+= total_bytes
;
3739 adapter
->net_stats
.tx_packets
+= total_packets
;
3743 #ifdef CONFIG_IGB_LRO
3745 * igb_get_skb_hdr - helper function for LRO header processing
3746 * @skb: pointer to sk_buff to be added to LRO packet
3747 * @iphdr: pointer to ip header structure
3748 * @tcph: pointer to tcp header structure
3749 * @hdr_flags: pointer to header flags
3750 * @priv: pointer to the receive descriptor for the current sk_buff
3752 static int igb_get_skb_hdr(struct sk_buff
*skb
, void **iphdr
, void **tcph
,
3753 u64
*hdr_flags
, void *priv
)
3755 union e1000_adv_rx_desc
*rx_desc
= priv
;
3756 u16 pkt_type
= rx_desc
->wb
.lower
.lo_dword
.pkt_info
&
3757 (E1000_RXDADV_PKTTYPE_IPV4
| E1000_RXDADV_PKTTYPE_TCP
);
3759 /* Verify that this is a valid IPv4 TCP packet */
3760 if (pkt_type
!= (E1000_RXDADV_PKTTYPE_IPV4
|
3761 E1000_RXDADV_PKTTYPE_TCP
))
3764 /* Set network headers */
3765 skb_reset_network_header(skb
);
3766 skb_set_transport_header(skb
, ip_hdrlen(skb
));
3767 *iphdr
= ip_hdr(skb
);
3768 *tcph
= tcp_hdr(skb
);
3769 *hdr_flags
= LRO_IPV4
| LRO_TCP
;
3774 #endif /* CONFIG_IGB_LRO */
3777 * igb_receive_skb - helper function to handle rx indications
3778 * @ring: pointer to receive ring receving this packet
3779 * @status: descriptor status field as written by hardware
3780 * @vlan: descriptor vlan field as written by hardware (no le/be conversion)
3781 * @skb: pointer to sk_buff to be indicated to stack
3783 static void igb_receive_skb(struct igb_ring
*ring
, u8 status
,
3784 union e1000_adv_rx_desc
* rx_desc
,
3785 struct sk_buff
*skb
)
3787 struct igb_adapter
* adapter
= ring
->adapter
;
3788 bool vlan_extracted
= (adapter
->vlgrp
&& (status
& E1000_RXD_STAT_VP
));
3790 #ifdef CONFIG_IGB_LRO
3791 if (adapter
->netdev
->features
& NETIF_F_LRO
&&
3792 skb
->ip_summed
== CHECKSUM_UNNECESSARY
) {
3794 lro_vlan_hwaccel_receive_skb(&ring
->lro_mgr
, skb
,
3796 le16_to_cpu(rx_desc
->wb
.upper
.vlan
),
3799 lro_receive_skb(&ring
->lro_mgr
,skb
, rx_desc
);
3804 vlan_hwaccel_receive_skb(skb
, adapter
->vlgrp
,
3805 le16_to_cpu(rx_desc
->wb
.upper
.vlan
));
3808 netif_receive_skb(skb
);
3809 #ifdef CONFIG_IGB_LRO
3815 static inline void igb_rx_checksum_adv(struct igb_adapter
*adapter
,
3816 u32 status_err
, struct sk_buff
*skb
)
3818 skb
->ip_summed
= CHECKSUM_NONE
;
3820 /* Ignore Checksum bit is set or checksum is disabled through ethtool */
3821 if ((status_err
& E1000_RXD_STAT_IXSM
) || !adapter
->rx_csum
)
3823 /* TCP/UDP checksum error bit is set */
3825 (E1000_RXDEXT_STATERR_TCPE
| E1000_RXDEXT_STATERR_IPE
)) {
3826 /* let the stack verify checksum errors */
3827 adapter
->hw_csum_err
++;
3830 /* It must be a TCP or UDP packet with a valid checksum */
3831 if (status_err
& (E1000_RXD_STAT_TCPCS
| E1000_RXD_STAT_UDPCS
))
3832 skb
->ip_summed
= CHECKSUM_UNNECESSARY
;
3834 adapter
->hw_csum_good
++;
3837 static bool igb_clean_rx_irq_adv(struct igb_ring
*rx_ring
,
3838 int *work_done
, int budget
)
3840 struct igb_adapter
*adapter
= rx_ring
->adapter
;
3841 struct net_device
*netdev
= adapter
->netdev
;
3842 struct pci_dev
*pdev
= adapter
->pdev
;
3843 union e1000_adv_rx_desc
*rx_desc
, *next_rxd
;
3844 struct igb_buffer
*buffer_info
, *next_buffer
;
3845 struct sk_buff
*skb
;
3847 u32 length
, hlen
, staterr
;
3848 bool cleaned
= false;
3849 int cleaned_count
= 0;
3850 unsigned int total_bytes
= 0, total_packets
= 0;
3852 i
= rx_ring
->next_to_clean
;
3853 rx_desc
= E1000_RX_DESC_ADV(*rx_ring
, i
);
3854 staterr
= le32_to_cpu(rx_desc
->wb
.upper
.status_error
);
3856 while (staterr
& E1000_RXD_STAT_DD
) {
3857 if (*work_done
>= budget
)
3860 buffer_info
= &rx_ring
->buffer_info
[i
];
3862 /* HW will not DMA in data larger than the given buffer, even
3863 * if it parses the (NFS, of course) header to be larger. In
3864 * that case, it fills the header buffer and spills the rest
3867 hlen
= (le16_to_cpu(rx_desc
->wb
.lower
.lo_dword
.hdr_info
) &
3868 E1000_RXDADV_HDRBUFLEN_MASK
) >> E1000_RXDADV_HDRBUFLEN_SHIFT
;
3869 if (hlen
> adapter
->rx_ps_hdr_size
)
3870 hlen
= adapter
->rx_ps_hdr_size
;
3872 length
= le16_to_cpu(rx_desc
->wb
.upper
.length
);
3876 skb
= buffer_info
->skb
;
3877 prefetch(skb
->data
- NET_IP_ALIGN
);
3878 buffer_info
->skb
= NULL
;
3879 if (!adapter
->rx_ps_hdr_size
) {
3880 pci_unmap_single(pdev
, buffer_info
->dma
,
3881 adapter
->rx_buffer_len
+
3883 PCI_DMA_FROMDEVICE
);
3884 skb_put(skb
, length
);
3888 if (!skb_shinfo(skb
)->nr_frags
) {
3889 pci_unmap_single(pdev
, buffer_info
->dma
,
3890 adapter
->rx_ps_hdr_size
+
3892 PCI_DMA_FROMDEVICE
);
3897 pci_unmap_page(pdev
, buffer_info
->page_dma
,
3898 PAGE_SIZE
/ 2, PCI_DMA_FROMDEVICE
);
3899 buffer_info
->page_dma
= 0;
3901 skb_fill_page_desc(skb
, skb_shinfo(skb
)->nr_frags
++,
3903 buffer_info
->page_offset
,
3906 if ((adapter
->rx_buffer_len
> (PAGE_SIZE
/ 2)) ||
3907 (page_count(buffer_info
->page
) != 1))
3908 buffer_info
->page
= NULL
;
3910 get_page(buffer_info
->page
);
3913 skb
->data_len
+= length
;
3915 skb
->truesize
+= length
;
3919 if (i
== rx_ring
->count
)
3921 next_rxd
= E1000_RX_DESC_ADV(*rx_ring
, i
);
3923 next_buffer
= &rx_ring
->buffer_info
[i
];
3925 if (!(staterr
& E1000_RXD_STAT_EOP
)) {
3926 buffer_info
->skb
= xchg(&next_buffer
->skb
, skb
);
3927 buffer_info
->dma
= xchg(&next_buffer
->dma
, 0);
3931 if (staterr
& E1000_RXDEXT_ERR_FRAME_ERR_MASK
) {
3932 dev_kfree_skb_irq(skb
);
3936 total_bytes
+= skb
->len
;
3939 igb_rx_checksum_adv(adapter
, staterr
, skb
);
3941 skb
->protocol
= eth_type_trans(skb
, netdev
);
3943 igb_receive_skb(rx_ring
, staterr
, rx_desc
, skb
);
3945 netdev
->last_rx
= jiffies
;
3948 rx_desc
->wb
.upper
.status_error
= 0;
3950 /* return some buffers to hardware, one at a time is too slow */
3951 if (cleaned_count
>= IGB_RX_BUFFER_WRITE
) {
3952 igb_alloc_rx_buffers_adv(rx_ring
, cleaned_count
);
3956 /* use prefetched values */
3958 buffer_info
= next_buffer
;
3960 staterr
= le32_to_cpu(rx_desc
->wb
.upper
.status_error
);
3963 rx_ring
->next_to_clean
= i
;
3964 cleaned_count
= IGB_DESC_UNUSED(rx_ring
);
3966 #ifdef CONFIG_IGB_LRO
3967 if (rx_ring
->lro_used
) {
3968 lro_flush_all(&rx_ring
->lro_mgr
);
3969 rx_ring
->lro_used
= 0;
3974 igb_alloc_rx_buffers_adv(rx_ring
, cleaned_count
);
3976 rx_ring
->total_packets
+= total_packets
;
3977 rx_ring
->total_bytes
+= total_bytes
;
3978 rx_ring
->rx_stats
.packets
+= total_packets
;
3979 rx_ring
->rx_stats
.bytes
+= total_bytes
;
3980 adapter
->net_stats
.rx_bytes
+= total_bytes
;
3981 adapter
->net_stats
.rx_packets
+= total_packets
;
3987 * igb_alloc_rx_buffers_adv - Replace used receive buffers; packet split
3988 * @adapter: address of board private structure
3990 static void igb_alloc_rx_buffers_adv(struct igb_ring
*rx_ring
,
3993 struct igb_adapter
*adapter
= rx_ring
->adapter
;
3994 struct net_device
*netdev
= adapter
->netdev
;
3995 struct pci_dev
*pdev
= adapter
->pdev
;
3996 union e1000_adv_rx_desc
*rx_desc
;
3997 struct igb_buffer
*buffer_info
;
3998 struct sk_buff
*skb
;
4001 i
= rx_ring
->next_to_use
;
4002 buffer_info
= &rx_ring
->buffer_info
[i
];
4004 while (cleaned_count
--) {
4005 rx_desc
= E1000_RX_DESC_ADV(*rx_ring
, i
);
4007 if (adapter
->rx_ps_hdr_size
&& !buffer_info
->page_dma
) {
4008 if (!buffer_info
->page
) {
4009 buffer_info
->page
= alloc_page(GFP_ATOMIC
);
4010 if (!buffer_info
->page
) {
4011 adapter
->alloc_rx_buff_failed
++;
4014 buffer_info
->page_offset
= 0;
4016 buffer_info
->page_offset
^= PAGE_SIZE
/ 2;
4018 buffer_info
->page_dma
=
4021 buffer_info
->page_offset
,
4023 PCI_DMA_FROMDEVICE
);
4026 if (!buffer_info
->skb
) {
4029 if (adapter
->rx_ps_hdr_size
)
4030 bufsz
= adapter
->rx_ps_hdr_size
;
4032 bufsz
= adapter
->rx_buffer_len
;
4033 bufsz
+= NET_IP_ALIGN
;
4034 skb
= netdev_alloc_skb(netdev
, bufsz
);
4037 adapter
->alloc_rx_buff_failed
++;
4041 /* Make buffer alignment 2 beyond a 16 byte boundary
4042 * this will result in a 16 byte aligned IP header after
4043 * the 14 byte MAC header is removed
4045 skb_reserve(skb
, NET_IP_ALIGN
);
4047 buffer_info
->skb
= skb
;
4048 buffer_info
->dma
= pci_map_single(pdev
, skb
->data
,
4050 PCI_DMA_FROMDEVICE
);
4053 /* Refresh the desc even if buffer_addrs didn't change because
4054 * each write-back erases this info. */
4055 if (adapter
->rx_ps_hdr_size
) {
4056 rx_desc
->read
.pkt_addr
=
4057 cpu_to_le64(buffer_info
->page_dma
);
4058 rx_desc
->read
.hdr_addr
= cpu_to_le64(buffer_info
->dma
);
4060 rx_desc
->read
.pkt_addr
=
4061 cpu_to_le64(buffer_info
->dma
);
4062 rx_desc
->read
.hdr_addr
= 0;
4066 if (i
== rx_ring
->count
)
4068 buffer_info
= &rx_ring
->buffer_info
[i
];
4072 if (rx_ring
->next_to_use
!= i
) {
4073 rx_ring
->next_to_use
= i
;
4075 i
= (rx_ring
->count
- 1);
4079 /* Force memory writes to complete before letting h/w
4080 * know there are new descriptors to fetch. (Only
4081 * applicable for weak-ordered memory model archs,
4082 * such as IA-64). */
4084 writel(i
, adapter
->hw
.hw_addr
+ rx_ring
->tail
);
4094 static int igb_mii_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
4096 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4097 struct mii_ioctl_data
*data
= if_mii(ifr
);
4099 if (adapter
->hw
.phy
.media_type
!= e1000_media_type_copper
)
4104 data
->phy_id
= adapter
->hw
.phy
.addr
;
4107 if (!capable(CAP_NET_ADMIN
))
4109 if (adapter
->hw
.phy
.ops
.read_phy_reg(&adapter
->hw
,
4111 & 0x1F, &data
->val_out
))
4127 static int igb_ioctl(struct net_device
*netdev
, struct ifreq
*ifr
, int cmd
)
4133 return igb_mii_ioctl(netdev
, ifr
, cmd
);
4139 static void igb_vlan_rx_register(struct net_device
*netdev
,
4140 struct vlan_group
*grp
)
4142 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4143 struct e1000_hw
*hw
= &adapter
->hw
;
4146 igb_irq_disable(adapter
);
4147 adapter
->vlgrp
= grp
;
4150 /* enable VLAN tag insert/strip */
4151 ctrl
= rd32(E1000_CTRL
);
4152 ctrl
|= E1000_CTRL_VME
;
4153 wr32(E1000_CTRL
, ctrl
);
4155 /* enable VLAN receive filtering */
4156 rctl
= rd32(E1000_RCTL
);
4157 rctl
&= ~E1000_RCTL_CFIEN
;
4158 wr32(E1000_RCTL
, rctl
);
4159 igb_update_mng_vlan(adapter
);
4161 adapter
->max_frame_size
+ VLAN_TAG_SIZE
);
4163 /* disable VLAN tag insert/strip */
4164 ctrl
= rd32(E1000_CTRL
);
4165 ctrl
&= ~E1000_CTRL_VME
;
4166 wr32(E1000_CTRL
, ctrl
);
4168 if (adapter
->mng_vlan_id
!= (u16
)IGB_MNG_VLAN_NONE
) {
4169 igb_vlan_rx_kill_vid(netdev
, adapter
->mng_vlan_id
);
4170 adapter
->mng_vlan_id
= IGB_MNG_VLAN_NONE
;
4173 adapter
->max_frame_size
);
4176 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
4177 igb_irq_enable(adapter
);
4180 static void igb_vlan_rx_add_vid(struct net_device
*netdev
, u16 vid
)
4182 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4183 struct e1000_hw
*hw
= &adapter
->hw
;
4186 if ((adapter
->hw
.mng_cookie
.status
&
4187 E1000_MNG_DHCP_COOKIE_STATUS_VLAN
) &&
4188 (vid
== adapter
->mng_vlan_id
))
4190 /* add VID to filter table */
4191 index
= (vid
>> 5) & 0x7F;
4192 vfta
= array_rd32(E1000_VFTA
, index
);
4193 vfta
|= (1 << (vid
& 0x1F));
4194 igb_write_vfta(&adapter
->hw
, index
, vfta
);
4197 static void igb_vlan_rx_kill_vid(struct net_device
*netdev
, u16 vid
)
4199 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4200 struct e1000_hw
*hw
= &adapter
->hw
;
4203 igb_irq_disable(adapter
);
4204 vlan_group_set_device(adapter
->vlgrp
, vid
, NULL
);
4206 if (!test_bit(__IGB_DOWN
, &adapter
->state
))
4207 igb_irq_enable(adapter
);
4209 if ((adapter
->hw
.mng_cookie
.status
&
4210 E1000_MNG_DHCP_COOKIE_STATUS_VLAN
) &&
4211 (vid
== adapter
->mng_vlan_id
)) {
4212 /* release control to f/w */
4213 igb_release_hw_control(adapter
);
4217 /* remove VID from filter table */
4218 index
= (vid
>> 5) & 0x7F;
4219 vfta
= array_rd32(E1000_VFTA
, index
);
4220 vfta
&= ~(1 << (vid
& 0x1F));
4221 igb_write_vfta(&adapter
->hw
, index
, vfta
);
4224 static void igb_restore_vlan(struct igb_adapter
*adapter
)
4226 igb_vlan_rx_register(adapter
->netdev
, adapter
->vlgrp
);
4228 if (adapter
->vlgrp
) {
4230 for (vid
= 0; vid
< VLAN_GROUP_ARRAY_LEN
; vid
++) {
4231 if (!vlan_group_get_device(adapter
->vlgrp
, vid
))
4233 igb_vlan_rx_add_vid(adapter
->netdev
, vid
);
4238 int igb_set_spd_dplx(struct igb_adapter
*adapter
, u16 spddplx
)
4240 struct e1000_mac_info
*mac
= &adapter
->hw
.mac
;
4244 /* Fiber NICs only allow 1000 gbps Full duplex */
4245 if ((adapter
->hw
.phy
.media_type
== e1000_media_type_fiber
) &&
4246 spddplx
!= (SPEED_1000
+ DUPLEX_FULL
)) {
4247 dev_err(&adapter
->pdev
->dev
,
4248 "Unsupported Speed/Duplex configuration\n");
4253 case SPEED_10
+ DUPLEX_HALF
:
4254 mac
->forced_speed_duplex
= ADVERTISE_10_HALF
;
4256 case SPEED_10
+ DUPLEX_FULL
:
4257 mac
->forced_speed_duplex
= ADVERTISE_10_FULL
;
4259 case SPEED_100
+ DUPLEX_HALF
:
4260 mac
->forced_speed_duplex
= ADVERTISE_100_HALF
;
4262 case SPEED_100
+ DUPLEX_FULL
:
4263 mac
->forced_speed_duplex
= ADVERTISE_100_FULL
;
4265 case SPEED_1000
+ DUPLEX_FULL
:
4267 adapter
->hw
.phy
.autoneg_advertised
= ADVERTISE_1000_FULL
;
4269 case SPEED_1000
+ DUPLEX_HALF
: /* not supported */
4271 dev_err(&adapter
->pdev
->dev
,
4272 "Unsupported Speed/Duplex configuration\n");
4279 static int igb_suspend(struct pci_dev
*pdev
, pm_message_t state
)
4281 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4282 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4283 struct e1000_hw
*hw
= &adapter
->hw
;
4284 u32 ctrl
, rctl
, status
;
4285 u32 wufc
= adapter
->wol
;
4290 netif_device_detach(netdev
);
4292 if (netif_running(netdev
))
4295 igb_reset_interrupt_capability(adapter
);
4297 igb_free_queues(adapter
);
4300 retval
= pci_save_state(pdev
);
4305 status
= rd32(E1000_STATUS
);
4306 if (status
& E1000_STATUS_LU
)
4307 wufc
&= ~E1000_WUFC_LNKC
;
4310 igb_setup_rctl(adapter
);
4311 igb_set_multi(netdev
);
4313 /* turn on all-multi mode if wake on multicast is enabled */
4314 if (wufc
& E1000_WUFC_MC
) {
4315 rctl
= rd32(E1000_RCTL
);
4316 rctl
|= E1000_RCTL_MPE
;
4317 wr32(E1000_RCTL
, rctl
);
4320 ctrl
= rd32(E1000_CTRL
);
4321 /* advertise wake from D3Cold */
4322 #define E1000_CTRL_ADVD3WUC 0x00100000
4323 /* phy power management enable */
4324 #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000
4325 ctrl
|= E1000_CTRL_ADVD3WUC
;
4326 wr32(E1000_CTRL
, ctrl
);
4328 /* Allow time for pending master requests to run */
4329 igb_disable_pcie_master(&adapter
->hw
);
4331 wr32(E1000_WUC
, E1000_WUC_PME_EN
);
4332 wr32(E1000_WUFC
, wufc
);
4335 wr32(E1000_WUFC
, 0);
4338 /* make sure adapter isn't asleep if manageability/wol is enabled */
4339 if (wufc
|| adapter
->en_mng_pt
) {
4340 pci_enable_wake(pdev
, PCI_D3hot
, 1);
4341 pci_enable_wake(pdev
, PCI_D3cold
, 1);
4343 igb_shutdown_fiber_serdes_link_82575(hw
);
4344 pci_enable_wake(pdev
, PCI_D3hot
, 0);
4345 pci_enable_wake(pdev
, PCI_D3cold
, 0);
4348 /* Release control of h/w to f/w. If f/w is AMT enabled, this
4349 * would have already happened in close and is redundant. */
4350 igb_release_hw_control(adapter
);
4352 pci_disable_device(pdev
);
4354 pci_set_power_state(pdev
, pci_choose_state(pdev
, state
));
4360 static int igb_resume(struct pci_dev
*pdev
)
4362 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4363 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4364 struct e1000_hw
*hw
= &adapter
->hw
;
4367 pci_set_power_state(pdev
, PCI_D0
);
4368 pci_restore_state(pdev
);
4370 if (adapter
->need_ioport
)
4371 err
= pci_enable_device(pdev
);
4373 err
= pci_enable_device_mem(pdev
);
4376 "igb: Cannot enable PCI device from suspend\n");
4379 pci_set_master(pdev
);
4381 pci_enable_wake(pdev
, PCI_D3hot
, 0);
4382 pci_enable_wake(pdev
, PCI_D3cold
, 0);
4384 igb_set_interrupt_capability(adapter
);
4386 if (igb_alloc_queues(adapter
)) {
4387 dev_err(&pdev
->dev
, "Unable to allocate memory for queues\n");
4391 /* e1000_power_up_phy(adapter); */
4394 wr32(E1000_WUS
, ~0);
4396 if (netif_running(netdev
)) {
4397 err
= igb_open(netdev
);
4402 netif_device_attach(netdev
);
4404 /* let the f/w know that the h/w is now under the control of the
4406 igb_get_hw_control(adapter
);
4412 static void igb_shutdown(struct pci_dev
*pdev
)
4414 igb_suspend(pdev
, PMSG_SUSPEND
);
4417 #ifdef CONFIG_NET_POLL_CONTROLLER
4419 * Polling 'interrupt' - used by things like netconsole to send skbs
4420 * without having to re-enable interrupts. It's not called while
4421 * the interrupt routine is executing.
4423 static void igb_netpoll(struct net_device
*netdev
)
4425 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4429 igb_irq_disable(adapter
);
4430 adapter
->flags
|= IGB_FLAG_IN_NETPOLL
;
4432 for (i
= 0; i
< adapter
->num_tx_queues
; i
++)
4433 igb_clean_tx_irq(&adapter
->tx_ring
[i
]);
4435 for (i
= 0; i
< adapter
->num_rx_queues
; i
++)
4436 igb_clean_rx_irq_adv(&adapter
->rx_ring
[i
],
4438 adapter
->rx_ring
[i
].napi
.weight
);
4440 adapter
->flags
&= ~IGB_FLAG_IN_NETPOLL
;
4441 igb_irq_enable(adapter
);
4443 #endif /* CONFIG_NET_POLL_CONTROLLER */
4446 * igb_io_error_detected - called when PCI error is detected
4447 * @pdev: Pointer to PCI device
4448 * @state: The current pci connection state
4450 * This function is called after a PCI bus error affecting
4451 * this device has been detected.
4453 static pci_ers_result_t
igb_io_error_detected(struct pci_dev
*pdev
,
4454 pci_channel_state_t state
)
4456 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4457 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4459 netif_device_detach(netdev
);
4461 if (netif_running(netdev
))
4463 pci_disable_device(pdev
);
4465 /* Request a slot slot reset. */
4466 return PCI_ERS_RESULT_NEED_RESET
;
4470 * igb_io_slot_reset - called after the pci bus has been reset.
4471 * @pdev: Pointer to PCI device
4473 * Restart the card from scratch, as if from a cold-boot. Implementation
4474 * resembles the first-half of the igb_resume routine.
4476 static pci_ers_result_t
igb_io_slot_reset(struct pci_dev
*pdev
)
4478 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4479 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4480 struct e1000_hw
*hw
= &adapter
->hw
;
4483 if (adapter
->need_ioport
)
4484 err
= pci_enable_device(pdev
);
4486 err
= pci_enable_device_mem(pdev
);
4489 "Cannot re-enable PCI device after reset.\n");
4490 return PCI_ERS_RESULT_DISCONNECT
;
4492 pci_set_master(pdev
);
4493 pci_restore_state(pdev
);
4495 pci_enable_wake(pdev
, PCI_D3hot
, 0);
4496 pci_enable_wake(pdev
, PCI_D3cold
, 0);
4499 wr32(E1000_WUS
, ~0);
4501 return PCI_ERS_RESULT_RECOVERED
;
4505 * igb_io_resume - called when traffic can start flowing again.
4506 * @pdev: Pointer to PCI device
4508 * This callback is called when the error recovery driver tells us that
4509 * its OK to resume normal operation. Implementation resembles the
4510 * second-half of the igb_resume routine.
4512 static void igb_io_resume(struct pci_dev
*pdev
)
4514 struct net_device
*netdev
= pci_get_drvdata(pdev
);
4515 struct igb_adapter
*adapter
= netdev_priv(netdev
);
4517 if (netif_running(netdev
)) {
4518 if (igb_up(adapter
)) {
4519 dev_err(&pdev
->dev
, "igb_up failed after reset\n");
4524 netif_device_attach(netdev
);
4526 /* let the f/w know that the h/w is now under the control of the
4528 igb_get_hw_control(adapter
);