drivers/net/irda/Kconfig

   1 menu "Infrared-port device drivers"
   2         depends on IRDA!=n
   3
   4 comment "SIR device drivers"
   5
   6 config IRTTY_SIR
   7         tristate "IrTTY (uses Linux serial driver)"
   8         depends on IRDA && TTY
   9         help
  10           Say Y here if you want to build support for the IrTTY line
  11           discipline.  To compile it as a module, choose M here: the module
  12           will be called irtty-sir. IrTTY makes it possible to use Linux's
  13           own serial driver for all IrDA ports that are 16550 compatible.
  14           Most IrDA chips are 16550 compatible so you should probably say Y
  15           to this option.  Using IrTTY will however limit the speed of the
  16           connection to 115200 bps (IrDA SIR mode).
  17
  18           If unsure, say Y.
  19
  20 config BFIN_SIR
  21         tristate "Blackfin SIR on UART"
  22         depends on BLACKFIN && IRDA
  23         default n
  24         help
  25           Say Y here if your want to enable SIR function on Blackfin UART
  26           devices.
  27
  28           To activate this driver you can start irattach like:
  29           "irattach irda0 -s"
  30
  31           Saying M, it will be built as a module named bfin_sir.
  32
  33           Note that you need to turn off one of the serial drivers for SIR
  34           to use that UART.
  35
  36 config BFIN_SIR0
  37         bool "Blackfin SIR on UART0"
  38         depends on BFIN_SIR && !SERIAL_BFIN_UART0
  39
  40 config BFIN_SIR1
  41         bool "Blackfin SIR on UART1"
  42         depends on BFIN_SIR && !SERIAL_BFIN_UART1 && (!BF531 && !BF532 && !BF533 && !BF561)
  43
  44 config BFIN_SIR2
  45         bool "Blackfin SIR on UART2"
  46         depends on BFIN_SIR && !SERIAL_BFIN_UART2 && (BF54x || BF538 || BF539)
  47
  48 config BFIN_SIR3
  49         bool "Blackfin SIR on UART3"
  50         depends on BFIN_SIR && !SERIAL_BFIN_UART3 && (BF54x)
  51
  52 choice
  53         prompt "SIR Mode"
  54         depends on BFIN_SIR
  55         default SIR_BFIN_DMA
  56
  57 config SIR_BFIN_DMA
  58         bool "DMA mode"
  59         depends on !DMA_UNCACHED_NONE
  60
  61 config SIR_BFIN_PIO
  62         bool "PIO mode"
  63 endchoice
  64
  65 config SH_SIR
  66         tristate "SuperH SIR on UART"
  67         depends on IRDA && SUPERH && \
  68                 (CPU_SUBTYPE_SH7722 || CPU_SUBTYPE_SH7723 || \
  69                  CPU_SUBTYPE_SH7724)
  70         default n
  71         help
  72           Say Y here if your want to enable SIR function on SuperH UART
  73           devices.
  74
  75 comment "Dongle support"
  76
  77 config DONGLE
  78         bool "Serial dongle support"
  79         depends on IRTTY_SIR
  80         help
  81           Say Y here if you have an infrared device that connects to your
  82           computer's serial port. These devices are called dongles. Then say Y
  83           or M to the driver for your particular dongle below.
  84
  85           Note that the answer to this question won't directly affect the
  86           kernel: saying N will just cause the configurator to skip all
  87           the questions about serial dongles.
  88
  89 config ESI_DONGLE
  90         tristate "ESI JetEye PC dongle"
  91         depends on IRTTY_SIR && DONGLE && IRDA
  92         help
  93           Say Y here if you want to build support for the Extended Systems
  94           JetEye PC dongle.  To compile it as a module, choose M here. The ESI
  95           dongle attaches to the normal 9-pin serial port connector, and can
  96           currently only be used by IrTTY.  To activate support for ESI
  97           dongles you will have to start irattach like this:
  98           "irattach -d esi".
  99
 100 config ACTISYS_DONGLE
 101         tristate "ACTiSYS IR-220L and IR220L+ dongle"
 102         depends on IRTTY_SIR && DONGLE && IRDA
 103         help
 104           Say Y here if you want to build support for the ACTiSYS IR-220L and
 105           IR220L+ dongles.  To compile it as a module, choose M here. The
 106           ACTiSYS dongles attaches to the normal 9-pin serial port connector,
 107           and can currently only be used by IrTTY.  To activate support for
 108           ACTiSYS dongles you will have to start irattach like this:
 109           "irattach -d actisys" or "irattach -d actisys+".
 110
 111 config TEKRAM_DONGLE
 112         tristate "Tekram IrMate 210B dongle"
 113         depends on IRTTY_SIR && DONGLE && IRDA
 114         help
 115           Say Y here if you want to build support for the Tekram IrMate 210B
 116           dongle.  To compile it as a module, choose M here. The Tekram dongle
 117           attaches to the normal 9-pin serial port connector, and can
 118           currently only be used by IrTTY.  To activate support for Tekram
 119           dongles you will have to start irattach like this:
 120           "irattach -d tekram".
 121
 122 config TOIM3232_DONGLE
 123         tristate "TOIM3232 IrDa dongle"
 124         depends on IRTTY_SIR && DONGLE && IRDA
 125         help
 126           Say Y here if you want to build support for the Vishay/Temic
 127           TOIM3232 and TOIM4232 based dongles.
 128           To compile it as a module, choose M here.
 129
 130 config LITELINK_DONGLE
 131         tristate "Parallax LiteLink dongle"
 132         depends on IRTTY_SIR && DONGLE && IRDA
 133         help
 134           Say Y here if you want to build support for the Parallax Litelink
 135           dongle.  To compile it as a module, choose M here.  The Parallax
 136           dongle attaches to the normal 9-pin serial port connector, and can
 137           currently only be used by IrTTY.  To activate support for Parallax
 138           dongles you will have to start irattach like this:
 139           "irattach -d litelink".
 140
 141 config MA600_DONGLE
 142         tristate "Mobile Action MA600 dongle"
 143         depends on IRTTY_SIR && DONGLE && IRDA
 144         help
 145           Say Y here if you want to build support for the Mobile Action MA600
 146           dongle.  To compile it as a module, choose M here. The MA600 dongle
 147           attaches to the normal 9-pin serial port connector, and can
 148           currently only be used by IrTTY.  The driver should also support
 149           the MA620 USB version of the dongle, if the integrated USB-to-RS232
 150           converter is supported by usbserial. To activate support for
 151           MA600 dongle you will have to start irattach like this:
 152           "irattach -d ma600".
 153
 154 config GIRBIL_DONGLE
 155         tristate "Greenwich GIrBIL dongle"
 156         depends on IRTTY_SIR && DONGLE && IRDA
 157         help
 158           Say Y here if you want to build support for the Greenwich GIrBIL
 159           dongle.  If you want to compile it as a module, choose M here.
 160           The Greenwich dongle attaches to the normal 9-pin serial port
 161           connector, and can currently only be used by IrTTY.  To activate
 162           support for Greenwich dongles you will have to start irattach
 163           like this: "irattach -d girbil".
 164
 165 config MCP2120_DONGLE
 166         tristate "Microchip MCP2120"
 167         depends on IRTTY_SIR && DONGLE && IRDA
 168         help
 169           Say Y here if you want to build support for the Microchip MCP2120
 170           dongle.  If you want to compile it as a module, choose M here.
 171           The MCP2120 dongle attaches to the normal 9-pin serial port
 172           connector, and can currently only be used by IrTTY.  To activate
 173           support for MCP2120 dongles you will have to start irattach
 174           like this: "irattach -d mcp2120".
 175
 176           You must build this dongle yourself.  For more information see:
 177           <http://www.eyetap.org/~tangf/irda_sir_linux.html>
 178
 179 config OLD_BELKIN_DONGLE
 180         tristate "Old Belkin dongle"
 181         depends on IRTTY_SIR && DONGLE && IRDA
 182         help
 183           Say Y here if you want to build support for the Adaptec Airport 1000
 184           and 2000 dongles.  If you want to compile it as a module, choose
 185           M here. Some information is contained in the comments
 186           at the top of <file:drivers/net/irda/old_belkin-sir.c>.
 187
 188 config ACT200L_DONGLE
 189         tristate "ACTiSYS IR-200L dongle"
 190         depends on IRTTY_SIR && DONGLE && IRDA
 191         help
 192           Say Y here if you want to build support for the ACTiSYS IR-200L
 193           dongle. If you want to compile it as a module, choose M here.
 194           The ACTiSYS IR-200L dongle attaches to the normal 9-pin serial
 195           port connector, and can currently only be used by IrTTY.
 196           To activate support for ACTiSYS IR-200L dongle you will have to
 197           start irattach like this: "irattach -d act200l".
 198
 199 config KINGSUN_DONGLE
 200         tristate "KingSun/DonShine DS-620 IrDA-USB dongle"
 201         depends on IRDA && USB
 202         help
 203           Say Y or M here if you want to build support for the KingSun/DonShine
 204           DS-620 IrDA-USB bridge device driver.
 205
 206           This USB bridge does not conform to the IrDA-USB device class
 207           specification, and therefore needs its own specific driver. This
 208           dongle supports SIR speed only (9600 bps).
 209
 210           To compile it as a module, choose M here: the module will be called
 211           kingsun-sir.
 212
 213 config KSDAZZLE_DONGLE
 214         tristate "KingSun Dazzle IrDA-USB dongle"
 215         depends on IRDA && USB
 216         help
 217           Say Y or M here if you want to build support for the KingSun Dazzle
 218           IrDA-USB bridge device driver.
 219
 220           This USB bridge does not conform to the IrDA-USB device class
 221           specification, and therefore needs its own specific driver. This
 222           dongle supports SIR speeds only (9600 through 115200 bps).
 223
 224           To compile it as a module, choose M here: the module will be called
 225           ksdazzle-sir.
 226
 227 config KS959_DONGLE
 228         tristate "KingSun KS-959 IrDA-USB dongle"
 229         depends on IRDA && USB
 230         help
 231           Say Y or M here if you want to build support for the KingSun KS-959
 232           IrDA-USB bridge device driver.
 233
 234           This USB bridge does not conform to the IrDA-USB device class
 235           specification, and therefore needs its own specific driver. This
 236           dongle supports SIR speeds only (9600 through 57600 bps).
 237
 238           To compile it as a module, choose M here: the module will be called
 239           ks959-sir.
 240
 241 comment "FIR device drivers"
 242
 243 config USB_IRDA
 244         tristate "IrDA USB dongles"
 245         depends on IRDA && USB
 246         select FW_LOADER
 247         ---help---
 248           Say Y here if you want to build support for the USB IrDA FIR Dongle
 249           device driver.  To compile it as a module, choose M here: the module
 250           will be called irda-usb.  IrDA-USB support the various IrDA USB
 251           dongles available and most of their peculiarities.  Those dongles
 252           plug in the USB port of your computer, are plug and play, and
 253           support SIR and FIR (4Mbps) speeds.  On the other hand, those
 254           dongles tend to be less efficient than a FIR chipset.
 255
 256           Please note that the driver is still experimental.  And of course,
 257           you will need both USB and IrDA support in your kernel...
 258
 259 config SIGMATEL_FIR
 260         tristate "SigmaTel STIr4200 bridge"
 261         depends on IRDA && USB
 262         select CRC32
 263         ---help---
 264           Say Y here if you want to build support for the SigmaTel STIr4200
 265           USB IrDA FIR bridge device driver.
 266
 267           USB bridge based on the SigmaTel STIr4200 don't conform to the
 268           IrDA-USB device class specification, and therefore need their
 269           own specific driver. Those dongles support SIR and FIR (4Mbps)
 270           speeds.
 271
 272           To compile it as a module, choose M here: the module will be called
 273           stir4200.
 274
 275 config NSC_FIR
 276         tristate "NSC PC87108/PC87338"
 277         depends on IRDA && ISA_DMA_API
 278         help
 279           Say Y here if you want to build support for the NSC PC87108 and
 280           PC87338 IrDA chipsets.  This driver supports SIR,
 281           MIR and FIR (4Mbps) speeds.
 282
 283           To compile it as a module, choose M here: the module will be called
 284           nsc-ircc.
 285
 286 config WINBOND_FIR
 287         tristate "Winbond W83977AF (IR)"
 288         depends on IRDA && ISA_DMA_API
 289         help
 290           Say Y here if you want to build IrDA support for the Winbond
 291           W83977AF super-io chipset.  This driver should be used for the IrDA
 292           chipset in the Corel NetWinder.  The driver supports SIR, MIR and
 293           FIR (4Mbps) speeds.
 294
 295           To compile it as a module, choose M here: the module will be called
 296           w83977af_ir.
 297
 298 config TOSHIBA_FIR
 299         tristate "Toshiba Type-O IR Port"
 300         depends on IRDA && PCI && !64BIT && VIRT_TO_BUS
 301         help
 302           Say Y here if you want to build support for the Toshiba Type-O IR
 303           and Donau oboe chipsets. These chipsets are used by the Toshiba
 304           Libretto 100/110CT, Tecra 8100, Portege 7020 and many more laptops.
 305           To compile it as a module, choose M here: the module will be called
 306           donauboe.
 307
 308 config AU1000_FIR
 309         tristate "Alchemy IrDA SIR/FIR"
 310         depends on IRDA && MIPS_ALCHEMY
 311         help
 312           Say Y/M here to build support the IrDA peripheral on the
 313           Alchemy Au1000 and Au1100 SoCs.
 314           Say M to build a module; it will be called au1k_ir.ko
 315
 316 config SMC_IRCC_FIR
 317         tristate "SMSC IrCC"
 318         depends on IRDA && ISA_DMA_API
 319         help
 320           Say Y here if you want to build support for the SMC Infrared
 321           Communications Controller.  It is used in a wide variety of
 322           laptops (Fujitsu, Sony, Compaq and some Toshiba).
 323           To compile it as a module, choose M here: the module will be called
 324           smsc-ircc2.o.
 325
 326 config ALI_FIR
 327         tristate "ALi M5123 FIR"
 328         depends on IRDA && ISA_DMA_API
 329         help
 330           Say Y here if you want to build support for the ALi M5123 FIR
 331           Controller.  The ALi M5123 FIR Controller is embedded in ALi M1543C,
 332           M1535, M1535D, M1535+, M1535D South Bridge.  This driver supports
 333           SIR, MIR and FIR (4Mbps) speeds.
 334
 335           To compile it as a module, choose M here: the module will be called
 336           ali-ircc.
 337
 338 config VLSI_FIR
 339         tristate "VLSI 82C147 SIR/MIR/FIR"
 340         depends on IRDA && PCI
 341         help
 342           Say Y here if you want to build support for the VLSI 82C147
 343           PCI-IrDA Controller. This controller is used by the HP OmniBook 800
 344           and 5500 notebooks. The driver provides support for SIR, MIR and
 345           FIR (4Mbps) speeds.
 346
 347           To compile it as a module, choose M here: the module will be called
 348           vlsi_ir.
 349
 350 config SA1100_FIR
 351         tristate "SA1100 Internal IR"
 352         depends on ARCH_SA1100 && IRDA && DMA_SA11X0
 353
 354 config VIA_FIR
 355         tristate "VIA VT8231/VT1211 SIR/MIR/FIR"
 356         depends on IRDA && ISA_DMA_API
 357         help
 358           Say Y here if you want to build support for the VIA VT8231
 359           and VIA VT1211 IrDA controllers, found on the motherboards using
 360           those VIA chipsets. To use this controller, you will need
 361           to plug a specific 5 pins FIR IrDA dongle in the specific
 362           motherboard connector. The driver provides support for SIR, MIR
 363           and FIR (4Mbps) speeds.
 364
 365           You will need to specify the 'dongle_id' module parameter to
 366           indicate the FIR dongle attached to the controller.
 367
 368           To compile it as a module, choose M here: the module will be called
 369           via-ircc.
 370
 371 config PXA_FICP
 372         tristate "Intel PXA2xx Internal FICP"
 373         depends on ARCH_PXA && IRDA
 374         help
 375           Say Y or M here if you want to build support for the PXA2xx
 376           built-in IRDA interface which can support both SIR and FIR.
 377           This driver relies on platform specific helper routines so
 378           available capabilities may vary from one PXA2xx target to
 379           another.
 380
 381 config MCS_FIR
 382         tristate "MosChip MCS7780 IrDA-USB dongle"
 383         depends on IRDA && USB
 384         select CRC32
 385         help
 386           Say Y or M here if you want to build support for the MosChip
 387           MCS7780 IrDA-USB bridge device driver.
 388
 389           USB bridge based on the MosChip MCS7780 don't conform to the
 390           IrDA-USB device class specification, and therefore need their
 391           own specific driver. Those dongles support SIR and FIR (4Mbps)
 392           speeds.
 393
 394           To compile it as a module, choose M here: the module will be called
 395           mcs7780.
 396
 397 endmenu
 398