drivers/net/irda/ksdazzle-sir.c

   1 /*****************************************************************************
   2 *
   3 * Filename:      ksdazzle.c
   4 * Version:       0.1.2
   5 * Description:   Irda KingSun Dazzle USB Dongle
   6 * Status:        Experimental
   7 * Author:        Alex Villacís Lasso <a_villacis@palosanto.com>
   8 *
   9 *    Based on stir4200, mcs7780, kingsun-sir drivers.
  10 *
  11 *    This program is free software; you can redistribute it and/or modify
  12 *    it under the terms of the GNU General Public License as published by
  13 *    the Free Software Foundation; either version 2 of the License.
  14 *
  15 *    This program is distributed in the hope that it will be useful,
  16 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
  17 *    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  18 *    GNU General Public License for more details.
  19 *
  20 *    You should have received a copy of the GNU General Public License
  21 *    along with this program; if not, write to the Free Software
  22 *    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  23 *
  24 *****************************************************************************/
  25
  26 /*
  27  * Following is my most current (2007-07-26) understanding of how the Kingsun
  28  * 07D0:4100 dongle (sometimes known as the MA-660) is supposed to work. This
  29  * information was deduced by examining the USB traffic captured with USBSnoopy
  30  * from the WinXP driver. Feel free to update here as more of the dongle is
  31  * known.
  32  *
  33  * General: This dongle exposes one interface with two interrupt endpoints, one
  34  * IN and one OUT. In this regard, it is similar to what the Kingsun/Donshine
  35  * dongle (07c0:4200) exposes. Traffic is raw and needs to be wrapped and
  36  * unwrapped manually as in stir4200, kingsun-sir, and ks959-sir.
  37  *
  38  * Transmission: To transmit an IrDA frame, it is necessary to wrap it, then
  39  * split it into multiple segments of up to 7 bytes each, and transmit each in
  40  * sequence. It seems that sending a single big block (like kingsun-sir does)
  41  * won't work with this dongle. Each segment needs to be prefixed with a value
  42  * equal to (unsigned char)0xF8 + <number of bytes in segment>, inside a payload
  43  * of exactly 8 bytes. For example, a segment of 1 byte gets prefixed by 0xF9,
  44  * and one of 7 bytes gets prefixed by 0xFF. The bytes at the end of the
  45  * payload, not considered by the prefix, are ignored (set to 0 by this
  46  * implementation).
  47  *
  48  * Reception: To receive data, the driver must poll the dongle regularly (like
  49  * kingsun-sir.c) with interrupt URBs. If data is available, it will be returned
  50  * in payloads from 0 to 8 bytes long. When concatenated, these payloads form
  51  * a raw IrDA stream that needs to be unwrapped as in stir4200 and kingsun-sir
  52  *
  53  * Speed change: To change the speed of the dongle, the driver prepares a
  54  * control URB with the following as a setup packet:
  55  *    bRequestType    USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE
  56  *    bRequest        0x09
  57  *    wValue          0x0200
  58  *    wIndex          0x0001
  59  *    wLength         0x0008 (length of the payload)
  60  * The payload is a 8-byte record, apparently identical to the one used in
  61  * drivers/usb/serial/cypress_m8.c to change speed:
  62  *     __u32 baudSpeed;
  63  *    unsigned int dataBits : 2;    // 0 - 5 bits 3 - 8 bits
  64  *    unsigned int : 1;
  65  *    unsigned int stopBits : 1;
  66  *    unsigned int parityEnable : 1;
  67  *    unsigned int parityType : 1;
  68  *    unsigned int : 1;
  69  *    unsigned int reset : 1;
  70  *    unsigned char reserved[3];    // set to 0
  71  *
  72  * For now only SIR speeds have been observed with this dongle. Therefore,
  73  * nothing is known on what changes (if any) must be done to frame wrapping /
  74  * unwrapping for higher than SIR speeds. This driver assumes no change is
  75  * necessary and announces support for all the way to 115200 bps.
  76  */
  77
  78 #include <linux/module.h>
  79 #include <linux/moduleparam.h>
  80 #include <linux/kernel.h>
  81 #include <linux/types.h>
  82 #include <linux/errno.h>
  83 #include <linux/init.h>
  84 #include <linux/slab.h>
  85 #include <linux/kref.h>
  86 #include <linux/usb.h>
  87 #include <linux/device.h>
  88 #include <linux/crc32.h>
  89
  90 #include <asm/unaligned.h>
  91 #include <asm/byteorder.h>
  92 #include <asm/uaccess.h>
  93
  94 #include <net/irda/irda.h>
  95 #include <net/irda/wrapper.h>
  96 #include <net/irda/crc.h>
  97
  98 #define KSDAZZLE_VENDOR_ID 0x07d0
  99 #define KSDAZZLE_PRODUCT_ID 0x4100
 100
 101 /* These are the currently known USB ids */
 102 static struct usb_device_id dongles[] = {
 103         /* KingSun Co,Ltd  IrDA/USB Bridge */
 104         {USB_DEVICE(KSDAZZLE_VENDOR_ID, KSDAZZLE_PRODUCT_ID)},
 105         {}
 106 };
 107
 108 MODULE_DEVICE_TABLE(usb, dongles);
 109
 110 #define KINGSUN_MTT 0x07
 111 #define KINGSUN_REQ_RECV 0x01
 112 #define KINGSUN_REQ_SEND 0x09
 113
 114 #define KINGSUN_SND_FIFO_SIZE    2048   /* Max packet we can send */
 115 #define KINGSUN_RCV_MAX 2048    /* Max transfer we can receive */
 116
 117 struct ksdazzle_speedparams {
 118         __le32 baudrate;        /* baud rate, little endian */
 119         __u8 flags;
 120         __u8 reserved[3];
 121 } __attribute__ ((packed));
 122
 123 #define KS_DATA_5_BITS 0x00
 124 #define KS_DATA_6_BITS 0x01
 125 #define KS_DATA_7_BITS 0x02
 126 #define KS_DATA_8_BITS 0x03
 127
 128 #define KS_STOP_BITS_1 0x00
 129 #define KS_STOP_BITS_2 0x08
 130
 131 #define KS_PAR_DISABLE    0x00
 132 #define KS_PAR_EVEN    0x10
 133 #define KS_PAR_ODD    0x30
 134 #define KS_RESET    0x80
 135
 136 #define KINGSUN_EP_IN                   0
 137 #define KINGSUN_EP_OUT                  1
 138
 139 struct ksdazzle_cb {
 140         struct usb_device *usbdev;      /* init: probe_irda */
 141         struct net_device *netdev;      /* network layer */
 142         struct irlap_cb *irlap; /* The link layer we are binded to */
 143
 144         struct qos_info qos;
 145
 146         struct urb *tx_urb;
 147         __u8 *tx_buf_clear;
 148         unsigned int tx_buf_clear_used;
 149         unsigned int tx_buf_clear_sent;
 150         __u8 tx_payload[8];
 151
 152         struct urb *rx_urb;
 153         __u8 *rx_buf;
 154         iobuff_t rx_unwrap_buff;
 155
 156         struct usb_ctrlrequest *speed_setuprequest;
 157         struct urb *speed_urb;
 158         struct ksdazzle_speedparams speedparams;
 159         unsigned int new_speed;
 160
 161         __u8 ep_in;
 162         __u8 ep_out;
 163
 164         spinlock_t lock;
 165         int receiving;
 166 };
 167
 168 /* Callback transmission routine */
 169 static void ksdazzle_speed_irq(struct urb *urb)
 170 {
 171         /* unlink, shutdown, unplug, other nasties */
 172         if (urb->status != 0) {
 173                 err("ksdazzle_speed_irq: urb asynchronously failed - %d",
 174                     urb->status);
 175         }
 176 }
 177
 178 /* Send a control request to change speed of the dongle */
 179 static int ksdazzle_change_speed(struct ksdazzle_cb *kingsun, unsigned speed)
 180 {
 181         static unsigned int supported_speeds[] = { 2400, 9600, 19200, 38400,
 182                 57600, 115200, 576000, 1152000, 4000000, 0
 183         };
 184         int err;
 185         unsigned int i;
 186
 187         if (kingsun->speed_setuprequest == NULL || kingsun->speed_urb == NULL)
 188                 return -ENOMEM;
 189
 190         /* Check that requested speed is among the supported ones */
 191         for (i = 0; supported_speeds[i] && supported_speeds[i] != speed; i++) ;
 192         if (supported_speeds[i] == 0)
 193                 return -EOPNOTSUPP;
 194
 195         memset(&(kingsun->speedparams), 0, sizeof(struct ksdazzle_speedparams));
 196         kingsun->speedparams.baudrate = cpu_to_le32(speed);
 197         kingsun->speedparams.flags = KS_DATA_8_BITS;
 198
 199         /* speed_setuprequest pre-filled in ksdazzle_probe */
 200         usb_fill_control_urb(kingsun->speed_urb, kingsun->usbdev,
 201                              usb_sndctrlpipe(kingsun->usbdev, 0),
 202                              (unsigned char *)kingsun->speed_setuprequest,
 203                              &(kingsun->speedparams),
 204                              sizeof(struct ksdazzle_speedparams),
 205                              ksdazzle_speed_irq, kingsun);
 206         kingsun->speed_urb->status = 0;
 207         err = usb_submit_urb(kingsun->speed_urb, GFP_ATOMIC);
 208
 209         return err;
 210 }
 211
 212 /* Submit one fragment of an IrDA frame to the dongle */
 213 static void ksdazzle_send_irq(struct urb *urb);
 214 static int ksdazzle_submit_tx_fragment(struct ksdazzle_cb *kingsun)
 215 {
 216         unsigned int wraplen;
 217         int ret;
 218
 219         /* We can send at most 7 bytes of payload at a time */
 220         wraplen = 7;
 221         if (wraplen > kingsun->tx_buf_clear_used)
 222                 wraplen = kingsun->tx_buf_clear_used;
 223
 224         /* Prepare payload prefix with used length */
 225         memset(kingsun->tx_payload, 0, 8);
 226         kingsun->tx_payload[0] = (unsigned char)0xf8 + wraplen;
 227         memcpy(kingsun->tx_payload + 1, kingsun->tx_buf_clear, wraplen);
 228
 229         usb_fill_int_urb(kingsun->tx_urb, kingsun->usbdev,
 230                          usb_sndintpipe(kingsun->usbdev, kingsun->ep_out),
 231                          kingsun->tx_payload, 8, ksdazzle_send_irq, kingsun, 1);
 232         kingsun->tx_urb->status = 0;
 233         ret = usb_submit_urb(kingsun->tx_urb, GFP_ATOMIC);
 234
 235         /* Remember how much data was sent, in order to update at callback */
 236         kingsun->tx_buf_clear_sent = (ret == 0) ? wraplen : 0;
 237         return ret;
 238 }
 239
 240 /* Callback transmission routine */
 241 static void ksdazzle_send_irq(struct urb *urb)
 242 {
 243         struct ksdazzle_cb *kingsun = urb->context;
 244         struct net_device *netdev = kingsun->netdev;
 245         int ret = 0;
 246
 247         /* in process of stopping, just drop data */
 248         if (!netif_running(kingsun->netdev)) {
 249                 err("ksdazzle_send_irq: Network not running!");
 250                 return;
 251         }
 252
 253         /* unlink, shutdown, unplug, other nasties */
 254         if (urb->status != 0) {
 255                 err("ksdazzle_send_irq: urb asynchronously failed - %d",
 256                     urb->status);
 257                 return;
 258         }
 259
 260         if (kingsun->tx_buf_clear_used > 0) {
 261                 /* Update data remaining to be sent */
 262                 if (kingsun->tx_buf_clear_sent < kingsun->tx_buf_clear_used) {
 263                         memmove(kingsun->tx_buf_clear,
 264                                 kingsun->tx_buf_clear +
 265                                 kingsun->tx_buf_clear_sent,
 266                                 kingsun->tx_buf_clear_used -
 267                                 kingsun->tx_buf_clear_sent);
 268                 }
 269                 kingsun->tx_buf_clear_used -= kingsun->tx_buf_clear_sent;
 270                 kingsun->tx_buf_clear_sent = 0;
 271
 272                 if (kingsun->tx_buf_clear_used > 0) {
 273                         /* There is more data to be sent */
 274                         if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) {
 275                                 err("ksdazzle_send_irq: failed tx_urb submit: %d", ret);
 276                                 switch (ret) {
 277                                 case -ENODEV:
 278                                 case -EPIPE:
 279                                         break;
 280                                 default:
 281                                         netdev->stats.tx_errors++;
 282                                         netif_start_queue(netdev);
 283                                 }
 284                         }
 285                 } else {
 286                         /* All data sent, send next speed && wake network queue */
 287                         if (kingsun->new_speed != -1 &&
 288                             cpu_to_le32(kingsun->new_speed) !=
 289                             kingsun->speedparams.baudrate)
 290                                 ksdazzle_change_speed(kingsun,
 291                                                       kingsun->new_speed);
 292
 293                         netif_wake_queue(netdev);
 294                 }
 295         }
 296 }
 297
 298 /*
 299  * Called from net/core when new frame is available.
 300  */
 301 static int ksdazzle_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
 302 {
 303         struct ksdazzle_cb *kingsun;
 304         unsigned int wraplen;
 305         int ret = 0;
 306
 307         if (skb == NULL || netdev == NULL)
 308                 return -EINVAL;
 309
 310         netif_stop_queue(netdev);
 311
 312         /* the IRDA wrapping routines don't deal with non linear skb */
 313         SKB_LINEAR_ASSERT(skb);
 314
 315         kingsun = netdev_priv(netdev);
 316
 317         spin_lock(&kingsun->lock);
 318         kingsun->new_speed = irda_get_next_speed(skb);
 319
 320         /* Append data to the end of whatever data remains to be transmitted */
 321         wraplen =
 322             async_wrap_skb(skb, kingsun->tx_buf_clear, KINGSUN_SND_FIFO_SIZE);
 323         kingsun->tx_buf_clear_used = wraplen;
 324
 325         if ((ret = ksdazzle_submit_tx_fragment(kingsun)) != 0) {
 326                 err("ksdazzle_hard_xmit: failed tx_urb submit: %d", ret);
 327                 switch (ret) {
 328                 case -ENODEV:
 329                 case -EPIPE:
 330                         break;
 331                 default:
 332                         netdev->stats.tx_errors++;
 333                         netif_start_queue(netdev);
 334                 }
 335         } else {
 336                 netdev->stats.tx_packets++;
 337                 netdev->stats.tx_bytes += skb->len;
 338
 339         }
 340
 341         dev_kfree_skb(skb);
 342         spin_unlock(&kingsun->lock);
 343
 344         return ret;
 345 }
 346
 347 /* Receive callback function */
 348 static void ksdazzle_rcv_irq(struct urb *urb)
 349 {
 350         struct ksdazzle_cb *kingsun = urb->context;
 351         struct net_device *netdev = kingsun->netdev;
 352
 353         /* in process of stopping, just drop data */
 354         if (!netif_running(netdev)) {
 355                 kingsun->receiving = 0;
 356                 return;
 357         }
 358
 359         /* unlink, shutdown, unplug, other nasties */
 360         if (urb->status != 0) {
 361                 err("ksdazzle_rcv_irq: urb asynchronously failed - %d",
 362                     urb->status);
 363                 kingsun->receiving = 0;
 364                 return;
 365         }
 366
 367         if (urb->actual_length > 0) {
 368                 __u8 *bytes = urb->transfer_buffer;
 369                 unsigned int i;
 370
 371                 for (i = 0; i < urb->actual_length; i++) {
 372                         async_unwrap_char(netdev, &netdev->stats,
 373                                           &kingsun->rx_unwrap_buff, bytes[i]);
 374                 }
 375                 kingsun->receiving =
 376                     (kingsun->rx_unwrap_buff.state != OUTSIDE_FRAME) ? 1 : 0;
 377         }
 378
 379         /* This urb has already been filled in ksdazzle_net_open. It is assumed that
 380            urb keeps the pointer to the payload buffer.
 381          */
 382         urb->status = 0;
 383         usb_submit_urb(urb, GFP_ATOMIC);
 384 }
 385
 386 /*
 387  * Function ksdazzle_net_open (dev)
 388  *
 389  *    Network device is taken up. Usually this is done by "ifconfig irda0 up"
 390  */
 391 static int ksdazzle_net_open(struct net_device *netdev)
 392 {
 393         struct ksdazzle_cb *kingsun = netdev_priv(netdev);
 394         int err = -ENOMEM;
 395         char hwname[16];
 396
 397         /* At this point, urbs are NULL, and skb is NULL (see ksdazzle_probe) */
 398         kingsun->receiving = 0;
 399
 400         /* Initialize for SIR to copy data directly into skb.  */
 401         kingsun->rx_unwrap_buff.in_frame = FALSE;
 402         kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME;
 403         kingsun->rx_unwrap_buff.truesize = IRDA_SKB_MAX_MTU;
 404         kingsun->rx_unwrap_buff.skb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
 405         if (!kingsun->rx_unwrap_buff.skb)
 406                 goto free_mem;
 407
 408         skb_reserve(kingsun->rx_unwrap_buff.skb, 1);
 409         kingsun->rx_unwrap_buff.head = kingsun->rx_unwrap_buff.skb->data;
 410
 411         kingsun->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
 412         if (!kingsun->rx_urb)
 413                 goto free_mem;
 414
 415         kingsun->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
 416         if (!kingsun->tx_urb)
 417                 goto free_mem;
 418
 419         kingsun->speed_urb = usb_alloc_urb(0, GFP_KERNEL);
 420         if (!kingsun->speed_urb)
 421                 goto free_mem;
 422
 423         /* Initialize speed for dongle */
 424         kingsun->new_speed = 9600;
 425         err = ksdazzle_change_speed(kingsun, 9600);
 426         if (err < 0)
 427                 goto free_mem;
 428
 429         /*
 430          * Now that everything should be initialized properly,
 431          * Open new IrLAP layer instance to take care of us...
 432          */
 433         sprintf(hwname, "usb#%d", kingsun->usbdev->devnum);
 434         kingsun->irlap = irlap_open(netdev, &kingsun->qos, hwname);
 435         if (!kingsun->irlap) {
 436                 err("ksdazzle-sir: irlap_open failed");
 437                 goto free_mem;
 438         }
 439
 440         /* Start reception. */
 441         usb_fill_int_urb(kingsun->rx_urb, kingsun->usbdev,
 442                          usb_rcvintpipe(kingsun->usbdev, kingsun->ep_in),
 443                          kingsun->rx_buf, KINGSUN_RCV_MAX, ksdazzle_rcv_irq,
 444                          kingsun, 1);
 445         kingsun->rx_urb->status = 0;
 446         err = usb_submit_urb(kingsun->rx_urb, GFP_KERNEL);
 447         if (err) {
 448                 err("ksdazzle-sir: first urb-submit failed: %d", err);
 449                 goto close_irlap;
 450         }
 451
 452         netif_start_queue(netdev);
 453
 454         /* Situation at this point:
 455            - all work buffers allocated
 456            - urbs allocated and ready to fill
 457            - max rx packet known (in max_rx)
 458            - unwrap state machine initialized, in state outside of any frame
 459            - receive request in progress
 460            - IrLAP layer started, about to hand over packets to send
 461          */
 462
 463         return 0;
 464
 465       close_irlap:
 466         irlap_close(kingsun->irlap);
 467       free_mem:
 468         usb_free_urb(kingsun->speed_urb);
 469         kingsun->speed_urb = NULL;
 470         usb_free_urb(kingsun->tx_urb);
 471         kingsun->tx_urb = NULL;
 472         usb_free_urb(kingsun->rx_urb);
 473         kingsun->rx_urb = NULL;
 474         if (kingsun->rx_unwrap_buff.skb) {
 475                 kfree_skb(kingsun->rx_unwrap_buff.skb);
 476                 kingsun->rx_unwrap_buff.skb = NULL;
 477                 kingsun->rx_unwrap_buff.head = NULL;
 478         }
 479         return err;
 480 }
 481
 482 /*
 483  * Function ksdazzle_net_close (dev)
 484  *
 485  *    Network device is taken down. Usually this is done by
 486  *    "ifconfig irda0 down"
 487  */
 488 static int ksdazzle_net_close(struct net_device *netdev)
 489 {
 490         struct ksdazzle_cb *kingsun = netdev_priv(netdev);
 491
 492         /* Stop transmit processing */
 493         netif_stop_queue(netdev);
 494
 495         /* Mop up receive && transmit urb's */
 496         usb_kill_urb(kingsun->tx_urb);
 497         usb_free_urb(kingsun->tx_urb);
 498         kingsun->tx_urb = NULL;
 499
 500         usb_kill_urb(kingsun->speed_urb);
 501         usb_free_urb(kingsun->speed_urb);
 502         kingsun->speed_urb = NULL;
 503
 504         usb_kill_urb(kingsun->rx_urb);
 505         usb_free_urb(kingsun->rx_urb);
 506         kingsun->rx_urb = NULL;
 507
 508         kfree_skb(kingsun->rx_unwrap_buff.skb);
 509         kingsun->rx_unwrap_buff.skb = NULL;
 510         kingsun->rx_unwrap_buff.head = NULL;
 511         kingsun->rx_unwrap_buff.in_frame = FALSE;
 512         kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME;
 513         kingsun->receiving = 0;
 514
 515         /* Stop and remove instance of IrLAP */
 516         irlap_close(kingsun->irlap);
 517
 518         kingsun->irlap = NULL;
 519
 520         return 0;
 521 }
 522
 523 /*
 524  * IOCTLs : Extra out-of-band network commands...
 525  */
 526 static int ksdazzle_net_ioctl(struct net_device *netdev, struct ifreq *rq,
 527                               int cmd)
 528 {
 529         struct if_irda_req *irq = (struct if_irda_req *)rq;
 530         struct ksdazzle_cb *kingsun = netdev_priv(netdev);
 531         int ret = 0;
 532
 533         switch (cmd) {
 534         case SIOCSBANDWIDTH:    /* Set bandwidth */
 535                 if (!capable(CAP_NET_ADMIN))
 536                         return -EPERM;
 537
 538                 /* Check if the device is still there */
 539                 if (netif_device_present(kingsun->netdev))
 540                         return ksdazzle_change_speed(kingsun,
 541                                                      irq->ifr_baudrate);
 542                 break;
 543
 544         case SIOCSMEDIABUSY:    /* Set media busy */
 545                 if (!capable(CAP_NET_ADMIN))
 546                         return -EPERM;
 547
 548                 /* Check if the IrDA stack is still there */
 549                 if (netif_running(kingsun->netdev))
 550                         irda_device_set_media_busy(kingsun->netdev, TRUE);
 551                 break;
 552
 553         case SIOCGRECEIVING:
 554                 /* Only approximately true */
 555                 irq->ifr_receiving = kingsun->receiving;
 556                 break;
 557
 558         default:
 559                 ret = -EOPNOTSUPP;
 560         }
 561
 562         return ret;
 563 }
 564
 565 static const struct net_device_ops ksdazzle_ops = {
 566         .ndo_start_xmit = ksdazzle_hard_xmit,
 567         .ndo_open       = ksdazzle_net_open,
 568         .ndo_stop       = ksdazzle_net_close,
 569         .ndo_do_ioctl   = ksdazzle_net_ioctl,
 570 };
 571
 572 /*
 573  * This routine is called by the USB subsystem for each new device
 574  * in the system. We need to check if the device is ours, and in
 575  * this case start handling it.
 576  */
 577 static int ksdazzle_probe(struct usb_interface *intf,
 578                           const struct usb_device_id *id)
 579 {
 580         struct usb_host_interface *interface;
 581         struct usb_endpoint_descriptor *endpoint;
 582
 583         struct usb_device *dev = interface_to_usbdev(intf);
 584         struct ksdazzle_cb *kingsun = NULL;
 585         struct net_device *net = NULL;
 586         int ret = -ENOMEM;
 587         int pipe, maxp_in, maxp_out;
 588         __u8 ep_in;
 589         __u8 ep_out;
 590
 591         /* Check that there really are two interrupt endpoints. Check based on the
 592            one in drivers/usb/input/usbmouse.c
 593          */
 594         interface = intf->cur_altsetting;
 595         if (interface->desc.bNumEndpoints != 2) {
 596                 err("ksdazzle: expected 2 endpoints, found %d",
 597                     interface->desc.bNumEndpoints);
 598                 return -ENODEV;
 599         }
 600         endpoint = &interface->endpoint[KINGSUN_EP_IN].desc;
 601         if (!usb_endpoint_is_int_in(endpoint)) {
 602                 err("ksdazzle: endpoint 0 is not interrupt IN");
 603                 return -ENODEV;
 604         }
 605
 606         ep_in = endpoint->bEndpointAddress;
 607         pipe = usb_rcvintpipe(dev, ep_in);
 608         maxp_in = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
 609         if (maxp_in > 255 || maxp_in <= 1) {
 610                 err("ksdazzle: endpoint 0 has max packet size %d not in range [2..255]", maxp_in);
 611                 return -ENODEV;
 612         }
 613
 614         endpoint = &interface->endpoint[KINGSUN_EP_OUT].desc;
 615         if (!usb_endpoint_is_int_out(endpoint)) {
 616                 err("ksdazzle: endpoint 1 is not interrupt OUT");
 617                 return -ENODEV;
 618         }
 619
 620         ep_out = endpoint->bEndpointAddress;
 621         pipe = usb_sndintpipe(dev, ep_out);
 622         maxp_out = usb_maxpacket(dev, pipe, usb_pipeout(pipe));
 623
 624         /* Allocate network device container. */
 625         net = alloc_irdadev(sizeof(*kingsun));
 626         if (!net)
 627                 goto err_out1;
 628
 629         SET_NETDEV_DEV(net, &intf->dev);
 630         kingsun = netdev_priv(net);
 631         kingsun->netdev = net;
 632         kingsun->usbdev = dev;
 633         kingsun->ep_in = ep_in;
 634         kingsun->ep_out = ep_out;
 635         kingsun->irlap = NULL;
 636         kingsun->tx_urb = NULL;
 637         kingsun->tx_buf_clear = NULL;
 638         kingsun->tx_buf_clear_used = 0;
 639         kingsun->tx_buf_clear_sent = 0;
 640
 641         kingsun->rx_urb = NULL;
 642         kingsun->rx_buf = NULL;
 643         kingsun->rx_unwrap_buff.in_frame = FALSE;
 644         kingsun->rx_unwrap_buff.state = OUTSIDE_FRAME;
 645         kingsun->rx_unwrap_buff.skb = NULL;
 646         kingsun->receiving = 0;
 647         spin_lock_init(&kingsun->lock);
 648
 649         kingsun->speed_setuprequest = NULL;
 650         kingsun->speed_urb = NULL;
 651         kingsun->speedparams.baudrate = 0;
 652
 653         /* Allocate input buffer */
 654         kingsun->rx_buf = kmalloc(KINGSUN_RCV_MAX, GFP_KERNEL);
 655         if (!kingsun->rx_buf)
 656                 goto free_mem;
 657
 658         /* Allocate output buffer */
 659         kingsun->tx_buf_clear = kmalloc(KINGSUN_SND_FIFO_SIZE, GFP_KERNEL);
 660         if (!kingsun->tx_buf_clear)
 661                 goto free_mem;
 662
 663         /* Allocate and initialize speed setup packet */
 664         kingsun->speed_setuprequest =
 665             kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
 666         if (!kingsun->speed_setuprequest)
 667                 goto free_mem;
 668         kingsun->speed_setuprequest->bRequestType =
 669             USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE;
 670         kingsun->speed_setuprequest->bRequest = KINGSUN_REQ_SEND;
 671         kingsun->speed_setuprequest->wValue = cpu_to_le16(0x0200);
 672         kingsun->speed_setuprequest->wIndex = cpu_to_le16(0x0001);
 673         kingsun->speed_setuprequest->wLength =
 674             cpu_to_le16(sizeof(struct ksdazzle_speedparams));
 675
 676         printk(KERN_INFO "KingSun/Dazzle IRDA/USB found at address %d, "
 677                "Vendor: %x, Product: %x\n",
 678                dev->devnum, le16_to_cpu(dev->descriptor.idVendor),
 679                le16_to_cpu(dev->descriptor.idProduct));
 680
 681         /* Initialize QoS for this device */
 682         irda_init_max_qos_capabilies(&kingsun->qos);
 683
 684         /* Baud rates known to be supported. Please uncomment if devices (other
 685            than a SonyEriccson K300 phone) can be shown to support higher speeds
 686            with this dongle.
 687          */
 688         kingsun->qos.baud_rate.bits =
 689             IR_2400 | IR_9600 | IR_19200 | IR_38400 | IR_57600 | IR_115200;
 690         kingsun->qos.min_turn_time.bits &= KINGSUN_MTT;
 691         irda_qos_bits_to_value(&kingsun->qos);
 692
 693         /* Override the network functions we need to use */
 694         net->netdev_ops = &ksdazzle_ops;
 695
 696         ret = register_netdev(net);
 697         if (ret != 0)
 698                 goto free_mem;
 699
 700         dev_info(&net->dev, "IrDA: Registered KingSun/Dazzle device %s\n",
 701                  net->name);
 702
 703         usb_set_intfdata(intf, kingsun);
 704
 705         /* Situation at this point:
 706            - all work buffers allocated
 707            - setup requests pre-filled
 708            - urbs not allocated, set to NULL
 709            - max rx packet known (is KINGSUN_FIFO_SIZE)
 710            - unwrap state machine (partially) initialized, but skb == NULL
 711          */
 712
 713         return 0;
 714
 715       free_mem:
 716         kfree(kingsun->speed_setuprequest);
 717         kfree(kingsun->tx_buf_clear);
 718         kfree(kingsun->rx_buf);
 719         free_netdev(net);
 720       err_out1:
 721         return ret;
 722 }
 723
 724 /*
 725  * The current device is removed, the USB layer tell us to shut it down...
 726  */
 727 static void ksdazzle_disconnect(struct usb_interface *intf)
 728 {
 729         struct ksdazzle_cb *kingsun = usb_get_intfdata(intf);
 730
 731         if (!kingsun)
 732                 return;
 733
 734         unregister_netdev(kingsun->netdev);
 735
 736         /* Mop up receive && transmit urb's */
 737         usb_kill_urb(kingsun->speed_urb);
 738         usb_free_urb(kingsun->speed_urb);
 739         kingsun->speed_urb = NULL;
 740
 741         usb_kill_urb(kingsun->tx_urb);
 742         usb_free_urb(kingsun->tx_urb);
 743         kingsun->tx_urb = NULL;
 744
 745         usb_kill_urb(kingsun->rx_urb);
 746         usb_free_urb(kingsun->rx_urb);
 747         kingsun->rx_urb = NULL;
 748
 749         kfree(kingsun->speed_setuprequest);
 750         kfree(kingsun->tx_buf_clear);
 751         kfree(kingsun->rx_buf);
 752         free_netdev(kingsun->netdev);
 753
 754         usb_set_intfdata(intf, NULL);
 755 }
 756
 757 #ifdef CONFIG_PM
 758 /* USB suspend, so power off the transmitter/receiver */
 759 static int ksdazzle_suspend(struct usb_interface *intf, pm_message_t message)
 760 {
 761         struct ksdazzle_cb *kingsun = usb_get_intfdata(intf);
 762
 763         netif_device_detach(kingsun->netdev);
 764         if (kingsun->speed_urb != NULL)
 765                 usb_kill_urb(kingsun->speed_urb);
 766         if (kingsun->tx_urb != NULL)
 767                 usb_kill_urb(kingsun->tx_urb);
 768         if (kingsun->rx_urb != NULL)
 769                 usb_kill_urb(kingsun->rx_urb);
 770         return 0;
 771 }
 772
 773 /* Coming out of suspend, so reset hardware */
 774 static int ksdazzle_resume(struct usb_interface *intf)
 775 {
 776         struct ksdazzle_cb *kingsun = usb_get_intfdata(intf);
 777
 778         if (kingsun->rx_urb != NULL) {
 779                 /* Setup request already filled in ksdazzle_probe */
 780                 usb_submit_urb(kingsun->rx_urb, GFP_KERNEL);
 781         }
 782         netif_device_attach(kingsun->netdev);
 783
 784         return 0;
 785 }
 786 #endif
 787
 788 /*
 789  * USB device callbacks
 790  */
 791 static struct usb_driver irda_driver = {
 792         .name = "ksdazzle-sir",
 793         .probe = ksdazzle_probe,
 794         .disconnect = ksdazzle_disconnect,
 795         .id_table = dongles,
 796 #ifdef CONFIG_PM
 797         .suspend = ksdazzle_suspend,
 798         .resume = ksdazzle_resume,
 799 #endif
 800 };
 801
 802 /*
 803  * Module insertion
 804  */
 805 static int __init ksdazzle_init(void)
 806 {
 807         return usb_register(&irda_driver);
 808 }
 809
 810 module_init(ksdazzle_init);
 811
 812 /*
 813  * Module removal
 814  */
 815 static void __exit ksdazzle_cleanup(void)
 816 {
 817         /* Deregister the driver and remove all pending instances */
 818         usb_deregister(&irda_driver);
 819 }
 820
 821 module_exit(ksdazzle_cleanup);
 822
 823 MODULE_AUTHOR("Alex Villacís Lasso <a_villacis@palosanto.com>");
 824 MODULE_DESCRIPTION("IrDA-USB Dongle Driver for KingSun Dazzle");
 825 MODULE_LICENSE("GPL");