2 * Copyright (c) 2007 Mellanox Technologies. All rights reserved.
4 * This software is available to you under a choice of one of two
5 * licenses. You may choose to be licensed under the terms of the GNU
6 * General Public License (GPL) Version 2, available from the file
7 * COPYING in the main directory of this source tree, or the
8 * OpenIB.org BSD license below:
10 * Redistribution and use in source and binary forms, with or
11 * without modification, are permitted provided that the following
14 * - Redistributions of source code must retain the above
15 * copyright notice, this list of conditions and the following
18 * - Redistributions in binary form must reproduce the above
19 * copyright notice, this list of conditions and the following
20 * disclaimer in the documentation and/or other materials
21 * provided with the distribution.
23 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
34 #include <linux/cpumask.h>
35 #include <linux/module.h>
36 #include <linux/delay.h>
37 #include <linux/netdevice.h>
39 #include <linux/mlx4/driver.h>
40 #include <linux/mlx4/device.h>
41 #include <linux/mlx4/cmd.h>
45 MODULE_AUTHOR("Liran Liss, Yevgeny Petrilin");
46 MODULE_DESCRIPTION("Mellanox ConnectX HCA Ethernet driver");
47 MODULE_LICENSE("Dual BSD/GPL");
48 MODULE_VERSION(DRV_VERSION
" ("DRV_RELDATE
")");
50 static const char mlx4_en_version
[] =
51 DRV_NAME
": Mellanox ConnectX HCA Ethernet driver v"
52 DRV_VERSION
" (" DRV_RELDATE
")\n";
54 #define MLX4_EN_PARM_INT(X, def_val, desc) \
55 static unsigned int X = def_val;\
56 module_param(X , uint, 0444); \
57 MODULE_PARM_DESC(X, desc);
61 * Device scope module parameters
65 /* Use a XOR rathern than Toeplitz hash function for RSS */
66 MLX4_EN_PARM_INT(rss_xor
, 0, "Use XOR hash function for RSS");
68 /* RSS hash type mask - default to <saddr, daddr, sport, dport> */
69 MLX4_EN_PARM_INT(rss_mask
, 0xf, "RSS hash type bitmask");
71 /* Number of LRO sessions per Rx ring (rounded up to a power of two) */
72 MLX4_EN_PARM_INT(num_lro
, MLX4_EN_MAX_LRO_DESCRIPTORS
,
73 "Number of LRO sessions per ring or disabled (0)");
75 /* Priority pausing */
76 MLX4_EN_PARM_INT(pfctx
, 0, "Priority based Flow Control policy on TX[7:0]."
77 " Per priority bit mask");
78 MLX4_EN_PARM_INT(pfcrx
, 0, "Priority based Flow Control policy on RX[7:0]."
79 " Per priority bit mask");
81 static int mlx4_en_get_profile(struct mlx4_en_dev
*mdev
)
83 struct mlx4_en_profile
*params
= &mdev
->profile
;
86 params
->rss_xor
= (rss_xor
!= 0);
87 params
->rss_mask
= rss_mask
& 0x1f;
88 params
->num_lro
= min_t(int, num_lro
, MLX4_EN_MAX_LRO_DESCRIPTORS
);
89 for (i
= 1; i
<= MLX4_MAX_PORTS
; i
++) {
90 params
->prof
[i
].rx_pause
= 1;
91 params
->prof
[i
].rx_ppp
= pfcrx
;
92 params
->prof
[i
].tx_pause
= 1;
93 params
->prof
[i
].tx_ppp
= pfctx
;
94 params
->prof
[i
].tx_ring_size
= MLX4_EN_DEF_TX_RING_SIZE
;
95 params
->prof
[i
].rx_ring_size
= MLX4_EN_DEF_RX_RING_SIZE
;
98 params
->prof
[1].tx_ring_num
= MLX4_EN_TX_RING_NUM
;
99 params
->prof
[2].tx_ring_num
= MLX4_EN_TX_RING_NUM
;
101 params
->prof
[1].tx_ring_num
= 1;
102 params
->prof
[2].tx_ring_num
= 1;
108 static void mlx4_en_event(struct mlx4_dev
*dev
, void *endev_ptr
,
109 enum mlx4_dev_event event
, int port
)
111 struct mlx4_en_dev
*mdev
= (struct mlx4_en_dev
*) endev_ptr
;
112 struct mlx4_en_priv
*priv
;
114 if (!mdev
->pndev
[port
])
117 priv
= netdev_priv(mdev
->pndev
[port
]);
119 case MLX4_DEV_EVENT_PORT_UP
:
120 case MLX4_DEV_EVENT_PORT_DOWN
:
121 /* To prevent races, we poll the link state in a separate
122 task rather than changing it here */
123 priv
->link_state
= event
;
124 queue_work(mdev
->workqueue
, &priv
->linkstate_task
);
127 case MLX4_DEV_EVENT_CATASTROPHIC_ERROR
:
128 mlx4_err(mdev
, "Internal error detected, restarting device\n");
132 mlx4_warn(mdev
, "Unhandled event: %d\n", event
);
136 static void mlx4_en_remove(struct mlx4_dev
*dev
, void *endev_ptr
)
138 struct mlx4_en_dev
*mdev
= endev_ptr
;
141 mutex_lock(&mdev
->state_lock
);
142 mdev
->device_up
= false;
143 mutex_unlock(&mdev
->state_lock
);
145 mlx4_foreach_port(i
, dev
, MLX4_PORT_TYPE_ETH
)
147 mlx4_en_destroy_netdev(mdev
->pndev
[i
]);
149 flush_workqueue(mdev
->workqueue
);
150 destroy_workqueue(mdev
->workqueue
);
151 mlx4_mr_free(dev
, &mdev
->mr
);
152 mlx4_uar_free(dev
, &mdev
->priv_uar
);
153 mlx4_pd_free(dev
, mdev
->priv_pdn
);
157 static void *mlx4_en_add(struct mlx4_dev
*dev
)
159 static int mlx4_en_version_printed
;
160 struct mlx4_en_dev
*mdev
;
164 if (!mlx4_en_version_printed
) {
165 printk(KERN_INFO
"%s", mlx4_en_version
);
166 mlx4_en_version_printed
++;
169 mdev
= kzalloc(sizeof *mdev
, GFP_KERNEL
);
171 dev_err(&dev
->pdev
->dev
, "Device struct alloc failed, "
177 if (mlx4_pd_alloc(dev
, &mdev
->priv_pdn
))
180 if (mlx4_uar_alloc(dev
, &mdev
->priv_uar
))
183 mdev
->uar_map
= ioremap(mdev
->priv_uar
.pfn
<< PAGE_SHIFT
, PAGE_SIZE
);
186 spin_lock_init(&mdev
->uar_lock
);
189 mdev
->dma_device
= &(dev
->pdev
->dev
);
190 mdev
->pdev
= dev
->pdev
;
191 mdev
->device_up
= false;
193 mdev
->LSO_support
= !!(dev
->caps
.flags
& (1 << 15));
194 if (!mdev
->LSO_support
)
195 mlx4_warn(mdev
, "LSO not supported, please upgrade to later "
196 "FW version to enable LSO\n");
198 if (mlx4_mr_alloc(mdev
->dev
, mdev
->priv_pdn
, 0, ~0ull,
199 MLX4_PERM_LOCAL_WRITE
| MLX4_PERM_LOCAL_READ
,
201 mlx4_err(mdev
, "Failed allocating memory region\n");
204 if (mlx4_mr_enable(mdev
->dev
, &mdev
->mr
)) {
205 mlx4_err(mdev
, "Failed enabling memory region\n");
209 /* Build device profile according to supplied module parameters */
210 err
= mlx4_en_get_profile(mdev
);
212 mlx4_err(mdev
, "Bad module parameters, aborting.\n");
216 /* Configure wich ports to start according to module parameters */
218 mlx4_foreach_port(i
, dev
, MLX4_PORT_TYPE_ETH
)
221 /* If we did not receive an explicit number of Rx rings, default to
222 * the number of completion vectors populated by the mlx4_core */
223 mlx4_foreach_port(i
, dev
, MLX4_PORT_TYPE_ETH
) {
224 mlx4_info(mdev
, "Using %d tx rings for port:%d\n",
225 mdev
->profile
.prof
[i
].tx_ring_num
, i
);
226 mdev
->profile
.prof
[i
].rx_ring_num
=
227 min_t(int, dev
->caps
.num_comp_vectors
, MAX_RX_RINGS
);
228 mlx4_info(mdev
, "Defaulting to %d rx rings for port:%d\n",
229 mdev
->profile
.prof
[i
].rx_ring_num
, i
);
232 /* Create our own workqueue for reset/multicast tasks
233 * Note: we cannot use the shared workqueue because of deadlocks caused
234 * by the rtnl lock */
235 mdev
->workqueue
= create_singlethread_workqueue("mlx4_en");
236 if (!mdev
->workqueue
) {
241 /* At this stage all non-port specific tasks are complete:
242 * mark the card state as up */
243 mutex_init(&mdev
->state_lock
);
244 mdev
->device_up
= true;
248 /* Create a netdev for each port */
249 mlx4_foreach_port(i
, dev
, MLX4_PORT_TYPE_ETH
) {
250 mlx4_info(mdev
, "Activating port:%d\n", i
);
251 if (mlx4_en_init_netdev(mdev
, i
, &mdev
->profile
.prof
[i
])) {
252 mdev
->pndev
[i
] = NULL
;
253 goto err_free_netdev
;
260 mlx4_foreach_port(i
, dev
, MLX4_PORT_TYPE_ETH
) {
262 mlx4_en_destroy_netdev(mdev
->pndev
[i
]);
265 mutex_lock(&mdev
->state_lock
);
266 mdev
->device_up
= false;
267 mutex_unlock(&mdev
->state_lock
);
268 flush_workqueue(mdev
->workqueue
);
270 /* Stop event queue before we drop down to release shared SW state */
271 destroy_workqueue(mdev
->workqueue
);
274 mlx4_mr_free(dev
, &mdev
->mr
);
276 mlx4_uar_free(dev
, &mdev
->priv_uar
);
278 mlx4_pd_free(dev
, mdev
->priv_pdn
);
285 static struct mlx4_interface mlx4_en_interface
= {
287 .remove
= mlx4_en_remove
,
288 .event
= mlx4_en_event
,
291 static int __init
mlx4_en_init(void)
293 return mlx4_register_interface(&mlx4_en_interface
);
296 static void __exit
mlx4_en_cleanup(void)
298 mlx4_unregister_interface(&mlx4_en_interface
);
301 module_init(mlx4_en_init
);
302 module_exit(mlx4_en_cleanup
);