1 /* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03)
2 * Xircom CreditCard Ethernet Adapter IIps driver
3 * Xircom Realport 10/100 (RE-100) driver
5 * This driver supports various Xircom CreditCard Ethernet adapters
6 * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56,
7 * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100.
9 * 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not
10 * autodetect the media properly. In this case use the
11 * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options
12 * to force the media type.
14 * Written originally by Werner Koch based on David Hinds' skeleton of the
17 * Copyright (c) 1997,1998 Werner Koch (dd9jn)
19 * This driver is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
24 * It is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
34 * ALTERNATIVELY, this driver may be distributed under the terms of
35 * the following license, in which case the provisions of this license
36 * are required INSTEAD OF the GNU General Public License. (This clause
37 * is necessary due to a potential bad interaction between the GPL and
38 * the restrictions contained in a BSD-style copyright.)
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
43 * 1. Redistributions of source code must retain the above copyright
44 * notice, and the entire permission notice in its entirety,
45 * including the disclaimer of warranties.
46 * 2. Redistributions in binary form must reproduce the above copyright
47 * notice, this list of conditions and the following disclaimer in the
48 * documentation and/or other materials provided with the distribution.
49 * 3. The name of the author may not be used to endorse or promote
50 * products derived from this software without specific prior
53 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
54 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
55 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
56 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
57 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
58 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
59 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
60 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
61 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
62 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
63 * OF THE POSSIBILITY OF SUCH DAMAGE.
66 #include <linux/module.h>
67 #include <linux/kernel.h>
68 #include <linux/init.h>
69 #include <linux/ptrace.h>
70 #include <linux/slab.h>
71 #include <linux/string.h>
72 #include <linux/timer.h>
73 #include <linux/interrupt.h>
75 #include <linux/delay.h>
76 #include <linux/ethtool.h>
77 #include <linux/netdevice.h>
78 #include <linux/etherdevice.h>
79 #include <linux/skbuff.h>
80 #include <linux/if_arp.h>
81 #include <linux/ioport.h>
82 #include <linux/bitops.h>
83 #include <linux/mii.h>
85 #include <pcmcia/cs_types.h>
86 #include <pcmcia/cs.h>
87 #include <pcmcia/cistpl.h>
88 #include <pcmcia/cisreg.h>
89 #include <pcmcia/ciscode.h>
92 #include <asm/system.h>
93 #include <asm/uaccess.h>
96 #define MANFID_COMPAQ 0x0138
97 #define MANFID_COMPAQ2 0x0183 /* is this correct? */
100 #include <pcmcia/ds.h>
102 /* Time in jiffies before concluding Tx hung */
103 #define TX_TIMEOUT ((400*HZ)/1000)
106 * Some constants used to access the hardware
109 /* Register offsets and value constans */
110 #define XIRCREG_CR 0 /* Command register (wr) */
112 TransmitPacket
= 0x01,
120 #define XIRCREG_ESR 0 /* Ethernet status register (rd) */
122 FullPktRcvd
= 0x01, /* full packet in receive buffer */
123 PktRejected
= 0x04, /* a packet has been rejected */
124 TxPktPend
= 0x08, /* TX Packet Pending */
125 IncorPolarity
= 0x10,
126 MediaSelect
= 0x20 /* set if TP, clear if AUI */
128 #define XIRCREG_PR 1 /* Page Register select */
129 #define XIRCREG_EDP 4 /* Ethernet Data Port Register */
130 #define XIRCREG_ISR 6 /* Ethernet Interrupt Status Register */
132 TxBufOvr
= 0x01, /* TX Buffer Overflow */
133 PktTxed
= 0x02, /* Packet Transmitted */
134 MACIntr
= 0x04, /* MAC Interrupt occurred */
135 TxResGrant
= 0x08, /* Tx Reservation Granted */
136 RxFullPkt
= 0x20, /* Rx Full Packet */
137 RxPktRej
= 0x40, /* Rx Packet Rejected */
138 ForcedIntr
= 0x80 /* Forced Interrupt */
140 #define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/
141 #define XIRCREG1_IMR1 13
142 #define XIRCREG0_TSO 8 /* Transmit Space Open Register (on page 0)*/
143 #define XIRCREG0_TRS 10 /* Transmit reservation Size Register (page 0)*/
144 #define XIRCREG0_DO 12 /* Data Offset Register (page 0) (wr) */
145 #define XIRCREG0_RSR 12 /* Receive Status Register (page 0) (rd) */
147 PhyPkt
= 0x01, /* set:physical packet, clear: multicast packet */
148 BrdcstPkt
= 0x02, /* set if it is a broadcast packet */
149 PktTooLong
= 0x04, /* set if packet length > 1518 */
150 AlignErr
= 0x10, /* incorrect CRC and last octet not complete */
151 CRCErr
= 0x20, /* incorrect CRC and last octet is complete */
152 PktRxOk
= 0x80 /* received ok */
154 #define XIRCREG0_PTR 13 /* packets transmitted register (rd) */
155 #define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */
156 #define XIRCREG1_ECR 14 /* ethernet configurationn register */
158 FullDuplex
= 0x04, /* enable full duplex mode */
159 LongTPMode
= 0x08, /* adjust for longer lengths of TP cable */
160 DisablePolCor
= 0x10,/* disable auto polarity correction */
161 DisableLinkPulse
= 0x20, /* disable link pulse generation */
162 DisableAutoTx
= 0x40, /* disable auto-transmit */
164 #define XIRCREG2_RBS 8 /* receive buffer start register */
165 #define XIRCREG2_LED 10 /* LED Configuration register */
166 /* values for the leds: Bits 2-0 for led 1
167 * 0 disabled Bits 5-3 for led 2
176 #define XIRCREG2_MSR 12 /* Mohawk specific register */
178 #define XIRCREG4_GPR0 8 /* General Purpose Register 0 */
179 #define XIRCREG4_GPR1 9 /* General Purpose Register 1 */
180 #define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/
181 #define XIRCREG4_BOV 10 /* Bonding Version Register */
182 #define XIRCREG4_LMA 12 /* Local Memory Address Register */
183 #define XIRCREG4_LMD 14 /* Local Memory Data Port */
184 /* MAC register can only by accessed with 8 bit operations */
185 #define XIRCREG40_CMD0 8 /* Command Register (wr) */
186 enum xirc_cmd
{ /* Commands */
195 #define XIRCREG5_RHSA0 10 /* Rx Host Start Address */
196 #define XIRCREG40_RXST0 9 /* Receive Status Register */
197 #define XIRCREG40_TXST0 11 /* Transmit Status Register 0 */
198 #define XIRCREG40_TXST1 12 /* Transmit Status Register 10 */
199 #define XIRCREG40_RMASK0 13 /* Receive Mask Register */
200 #define XIRCREG40_TMASK0 14 /* Transmit Mask Register 0 */
201 #define XIRCREG40_TMASK1 15 /* Transmit Mask Register 0 */
202 #define XIRCREG42_SWC0 8 /* Software Configuration 0 */
203 #define XIRCREG42_SWC1 9 /* Software Configuration 1 */
204 #define XIRCREG42_BOC 10 /* Back-Off Configuration */
205 #define XIRCREG44_TDR0 8 /* Time Domain Reflectometry 0 */
206 #define XIRCREG44_TDR1 9 /* Time Domain Reflectometry 1 */
207 #define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */
208 #define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */
209 #define XIRCREG45_REV 15 /* Revision Register (rd) */
210 #define XIRCREG50_IA 8 /* Individual Address (8-13) */
212 static const char *if_names
[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
215 #define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: "
216 #define KERR_XIRC KERN_ERR "xirc2ps_cs: "
217 #define KWRN_XIRC KERN_WARNING "xirc2ps_cs: "
218 #define KNOT_XIRC KERN_NOTICE "xirc2ps_cs: "
219 #define KINF_XIRC KERN_INFO "xirc2ps_cs: "
222 #define XIR_UNKNOWN 0 /* unknown: not supported */
223 #define XIR_CE 1 /* (prodid 1) different hardware: not supported */
224 #define XIR_CE2 2 /* (prodid 2) */
225 #define XIR_CE3 3 /* (prodid 3) */
226 #define XIR_CEM 4 /* (prodid 1) different hardware: not supported */
227 #define XIR_CEM2 5 /* (prodid 2) */
228 #define XIR_CEM3 6 /* (prodid 3) */
229 #define XIR_CEM33 7 /* (prodid 4) */
230 #define XIR_CEM56M 8 /* (prodid 5) */
231 #define XIR_CEM56 9 /* (prodid 6) */
232 #define XIR_CM28 10 /* (prodid 3) modem only: not supported here */
233 #define XIR_CM33 11 /* (prodid 4) modem only: not supported here */
234 #define XIR_CM56 12 /* (prodid 5) modem only: not supported here */
235 #define XIR_CG 13 /* (prodid 1) GSM modem only: not supported */
236 #define XIR_CBE 14 /* (prodid 1) cardbus ethernet: not supported */
237 /*====================================================================*/
239 /* Module parameters */
241 MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver");
242 MODULE_LICENSE("Dual MPL/GPL");
244 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
246 INT_MODULE_PARM(if_port
, 0);
247 INT_MODULE_PARM(full_duplex
, 0);
248 INT_MODULE_PARM(do_sound
, 1);
249 INT_MODULE_PARM(lockup_hack
, 0); /* anti lockup hack */
251 /*====================================================================*/
253 /* We do not process more than these number of bytes during one
254 * interrupt. (Of course we receive complete packets, so this is not
256 * Something between 2000..22000; first value gives best interrupt latency,
257 * the second enables the usage of the complete on-chip buffer. We use the
258 * high value as the initial value.
260 static unsigned maxrx_bytes
= 22000;
262 /* MII management prototypes */
263 static void mii_idle(unsigned int ioaddr
);
264 static void mii_putbit(unsigned int ioaddr
, unsigned data
);
265 static int mii_getbit(unsigned int ioaddr
);
266 static void mii_wbits(unsigned int ioaddr
, unsigned data
, int len
);
267 static unsigned mii_rd(unsigned int ioaddr
, u_char phyaddr
, u_char phyreg
);
268 static void mii_wr(unsigned int ioaddr
, u_char phyaddr
, u_char phyreg
,
269 unsigned data
, int len
);
272 * The event() function is this driver's Card Services event handler.
273 * It will be called by Card Services when an appropriate card status
274 * event is received. The config() and release() entry points are
275 * used to configure or release a socket, in response to card insertion
276 * and ejection events. They are invoked from the event handler.
279 static int has_ce2_string(struct pcmcia_device
* link
);
280 static int xirc2ps_config(struct pcmcia_device
* link
);
281 static void xirc2ps_release(struct pcmcia_device
* link
);
284 * The attach() and detach() entry points are used to create and destroy
285 * "instances" of the driver, where each instance represents everything
286 * needed to manage one actual PCMCIA card.
289 static void xirc2ps_detach(struct pcmcia_device
*p_dev
);
292 * You'll also need to prototype all the functions that will actually
293 * be used to talk to your device. See 'pcmem_cs' for a good example
294 * of a fully self-sufficient driver; the other drivers rely more or
295 * less on other parts of the kernel.
298 static irqreturn_t
xirc2ps_interrupt(int irq
, void *dev_id
);
301 * A linked list of "instances" of the device. Each actual
302 * PCMCIA card corresponds to one device instance, and is described
303 * by one struct pcmcia_device structure (defined in ds.h).
305 * You may not want to use a linked list for this -- for example, the
306 * memory card driver uses an array of struct pcmcia_device pointers, where minor
307 * device numbers are used to derive the corresponding array index.
311 * A driver needs to provide a dev_node_t structure for each device
312 * on a card. In some cases, there is only one device per card (for
313 * example, ethernet cards, modems). In other cases, there may be
314 * many actual or logical devices (SCSI adapters, memory cards with
315 * multiple partitions). The dev_node_t structures need to be kept
316 * in a linked list starting at the 'dev' field of a struct pcmcia_device
317 * structure. We allocate them in the card's private data structure,
318 * because they generally can't be allocated dynamically.
321 typedef struct local_info_t
{
322 struct net_device
*dev
;
323 struct pcmcia_device
*p_dev
;
328 int silicon
; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */
329 int mohawk
; /* a CE3 type card */
330 int dingo
; /* a CEM56 type card */
331 int new_mii
; /* has full 10baseT/100baseT MII */
332 int modem
; /* is a multi function card (i.e with a modem) */
333 void __iomem
*dingo_ccr
; /* only used for CEM56 cards */
334 unsigned last_ptr_value
; /* last packets transmitted value */
335 const char *manf_str
;
336 struct work_struct tx_timeout_task
;
340 * Some more prototypes
342 static netdev_tx_t
do_start_xmit(struct sk_buff
*skb
,
343 struct net_device
*dev
);
344 static void xirc_tx_timeout(struct net_device
*dev
);
345 static void xirc2ps_tx_timeout_task(struct work_struct
*work
);
346 static void set_addresses(struct net_device
*dev
);
347 static void set_multicast_list(struct net_device
*dev
);
348 static int set_card_type(struct pcmcia_device
*link
);
349 static int do_config(struct net_device
*dev
, struct ifmap
*map
);
350 static int do_open(struct net_device
*dev
);
351 static int do_ioctl(struct net_device
*dev
, struct ifreq
*rq
, int cmd
);
352 static const struct ethtool_ops netdev_ethtool_ops
;
353 static void hardreset(struct net_device
*dev
);
354 static void do_reset(struct net_device
*dev
, int full
);
355 static int init_mii(struct net_device
*dev
);
356 static void do_powerdown(struct net_device
*dev
);
357 static int do_stop(struct net_device
*dev
);
359 /*=============== Helper functions =========================*/
360 #define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR)
361 #define GetByte(reg) ((unsigned)inb(ioaddr + (reg)))
362 #define GetWord(reg) ((unsigned)inw(ioaddr + (reg)))
363 #define PutByte(reg,value) outb((value), ioaddr+(reg))
364 #define PutWord(reg,value) outw((value), ioaddr+(reg))
366 /*====== Functions used for debugging =================================*/
367 #if 0 /* reading regs may change system status */
369 PrintRegisters(struct net_device
*dev
)
371 unsigned int ioaddr
= dev
->base_addr
;
376 printk(KDBG_XIRC
"Register common: ");
377 for (i
= 0; i
< 8; i
++)
378 printk(" %2.2x", GetByte(i
));
380 for (page
= 0; page
<= 8; page
++) {
381 printk(KDBG_XIRC
"Register page %2x: ", page
);
383 for (i
= 8; i
< 16; i
++)
384 printk(" %2.2x", GetByte(i
));
387 for (page
=0x40 ; page
<= 0x5f; page
++) {
388 if (page
== 0x43 || (page
>= 0x46 && page
<= 0x4f) ||
389 (page
>= 0x51 && page
<=0x5e))
391 printk(KDBG_XIRC
"Register page %2x: ", page
);
393 for (i
= 8; i
< 16; i
++)
394 printk(" %2.2x", GetByte(i
));
401 /*============== MII Management functions ===============*/
404 * Turn around for read
407 mii_idle(unsigned int ioaddr
)
409 PutByte(XIRCREG2_GPR2
, 0x04|0); /* drive MDCK low */
411 PutByte(XIRCREG2_GPR2
, 0x04|1); /* and drive MDCK high */
416 * Write a bit to MDI/O
419 mii_putbit(unsigned int ioaddr
, unsigned data
)
423 PutByte(XIRCREG2_GPR2
, 0x0c|2|0); /* set MDIO */
425 PutByte(XIRCREG2_GPR2
, 0x0c|2|1); /* and drive MDCK high */
428 PutByte(XIRCREG2_GPR2
, 0x0c|0|0); /* clear MDIO */
430 PutByte(XIRCREG2_GPR2
, 0x0c|0|1); /* and drive MDCK high */
435 PutWord(XIRCREG2_GPR2
-1, 0x0e0e);
437 PutWord(XIRCREG2_GPR2
-1, 0x0f0f);
440 PutWord(XIRCREG2_GPR2
-1, 0x0c0c);
442 PutWord(XIRCREG2_GPR2
-1, 0x0d0d);
449 * Get a bit from MDI/O
452 mii_getbit(unsigned int ioaddr
)
456 PutByte(XIRCREG2_GPR2
, 4|0); /* drive MDCK low */
458 d
= GetByte(XIRCREG2_GPR2
); /* read MDIO */
459 PutByte(XIRCREG2_GPR2
, 4|1); /* drive MDCK high again */
461 return d
& 0x20; /* read MDIO */
465 mii_wbits(unsigned int ioaddr
, unsigned data
, int len
)
467 unsigned m
= 1 << (len
-1);
469 mii_putbit(ioaddr
, data
& m
);
473 mii_rd(unsigned int ioaddr
, u_char phyaddr
, u_char phyreg
)
479 for (i
=0; i
< 32; i
++) /* 32 bit preamble */
480 mii_putbit(ioaddr
, 1);
481 mii_wbits(ioaddr
, 0x06, 4); /* Start and opcode for read */
482 mii_wbits(ioaddr
, phyaddr
, 5); /* PHY address to be accessed */
483 mii_wbits(ioaddr
, phyreg
, 5); /* PHY register to read */
484 mii_idle(ioaddr
); /* turn around */
487 for (m
= 1<<15; m
; m
>>= 1)
488 if (mii_getbit(ioaddr
))
495 mii_wr(unsigned int ioaddr
, u_char phyaddr
, u_char phyreg
, unsigned data
,
501 for (i
=0; i
< 32; i
++) /* 32 bit preamble */
502 mii_putbit(ioaddr
, 1);
503 mii_wbits(ioaddr
, 0x05, 4); /* Start and opcode for write */
504 mii_wbits(ioaddr
, phyaddr
, 5); /* PHY address to be accessed */
505 mii_wbits(ioaddr
, phyreg
, 5); /* PHY Register to write */
506 mii_putbit(ioaddr
, 1); /* turn around */
507 mii_putbit(ioaddr
, 0);
508 mii_wbits(ioaddr
, data
, len
); /* And write the data */
512 /*============= Main bulk of functions =========================*/
514 static const struct net_device_ops netdev_ops
= {
517 .ndo_start_xmit
= do_start_xmit
,
518 .ndo_tx_timeout
= xirc_tx_timeout
,
519 .ndo_set_config
= do_config
,
520 .ndo_do_ioctl
= do_ioctl
,
521 .ndo_set_multicast_list
= set_multicast_list
,
522 .ndo_change_mtu
= eth_change_mtu
,
523 .ndo_set_mac_address
= eth_mac_addr
,
524 .ndo_validate_addr
= eth_validate_addr
,
528 * xirc2ps_attach() creates an "instance" of the driver, allocating
529 * local data structures for one device. The device is registered
530 * with Card Services.
532 * The dev_link structure is initialized, but we don't actually
533 * configure the card at this point -- we wait until we receive a
534 * card insertion event.
538 xirc2ps_probe(struct pcmcia_device
*link
)
540 struct net_device
*dev
;
543 dev_dbg(&link
->dev
, "attach()\n");
545 /* Allocate the device structure */
546 dev
= alloc_etherdev(sizeof(local_info_t
));
549 local
= netdev_priv(dev
);
554 /* General socket configuration */
555 link
->conf
.Attributes
= CONF_ENABLE_IRQ
;
556 link
->conf
.IntType
= INT_MEMORY_AND_IO
;
557 link
->conf
.ConfigIndex
= 1;
558 link
->irq
.Handler
= xirc2ps_interrupt
;
560 /* Fill in card specific entries */
561 dev
->netdev_ops
= &netdev_ops
;
562 dev
->ethtool_ops
= &netdev_ethtool_ops
;
563 dev
->watchdog_timeo
= TX_TIMEOUT
;
564 INIT_WORK(&local
->tx_timeout_task
, xirc2ps_tx_timeout_task
);
566 return xirc2ps_config(link
);
567 } /* xirc2ps_attach */
570 * This deletes a driver "instance". The device is de-registered
571 * with Card Services. If it has been released, all local data
572 * structures are freed. Otherwise, the structures will be freed
573 * when the device is released.
577 xirc2ps_detach(struct pcmcia_device
*link
)
579 struct net_device
*dev
= link
->priv
;
581 dev_dbg(&link
->dev
, "detach\n");
584 unregister_netdev(dev
);
586 xirc2ps_release(link
);
589 } /* xirc2ps_detach */
592 * Detect the type of the card. s is the buffer with the data of tuple 0x20
593 * Returns: 0 := not supported
594 * mediaid=11 and prodid=47
610 set_card_type(struct pcmcia_device
*link
)
612 struct net_device
*dev
= link
->priv
;
613 local_info_t
*local
= netdev_priv(dev
);
615 unsigned int cisrev
, mediaid
, prodid
;
618 len
= pcmcia_get_tuple(link
, CISTPL_MANFID
, &buf
);
620 dev_err(&link
->dev
, "invalid CIS -- sorry\n");
628 dev_dbg(&link
->dev
, "cisrev=%02x mediaid=%02x prodid=%02x\n",
629 cisrev
, mediaid
, prodid
);
634 local
->card_type
= XIR_UNKNOWN
;
635 if (!(prodid
& 0x40)) {
636 printk(KNOT_XIRC
"Ooops: Not a creditcard\n");
639 if (!(mediaid
& 0x01)) {
640 printk(KNOT_XIRC
"Not an Ethernet card\n");
643 if (mediaid
& 0x10) {
645 switch(prodid
& 15) {
646 case 1: local
->card_type
= XIR_CEM
; break;
647 case 2: local
->card_type
= XIR_CEM2
; break;
648 case 3: local
->card_type
= XIR_CEM3
; break;
649 case 4: local
->card_type
= XIR_CEM33
; break;
650 case 5: local
->card_type
= XIR_CEM56M
;
654 case 7: /* 7 is the RealPort 10/56 */
655 local
->card_type
= XIR_CEM56
;
661 switch(prodid
& 15) {
662 case 1: local
->card_type
= has_ce2_string(link
)? XIR_CE2
: XIR_CE
;
664 case 2: local
->card_type
= XIR_CE2
; break;
665 case 3: local
->card_type
= XIR_CE3
;
670 if (local
->card_type
== XIR_CE
|| local
->card_type
== XIR_CEM
) {
671 printk(KNOT_XIRC
"Sorry, this is an old CE card\n");
674 if (local
->card_type
== XIR_UNKNOWN
)
675 printk(KNOT_XIRC
"unknown card (mediaid=%02x prodid=%02x)\n",
682 * There are some CE2 cards out which claim to be a CE card.
683 * This function looks for a "CE2" in the 3rd version field.
684 * Returns: true if this is a CE2
687 has_ce2_string(struct pcmcia_device
* p_dev
)
689 if (p_dev
->prod_id
[2] && strstr(p_dev
->prod_id
[2], "CE2"))
695 xirc2ps_config_modem(struct pcmcia_device
*p_dev
,
696 cistpl_cftable_entry_t
*cf
,
697 cistpl_cftable_entry_t
*dflt
,
703 if (cf
->io
.nwin
> 0 && (cf
->io
.win
[0].base
& 0xf) == 8) {
704 for (ioaddr
= 0x300; ioaddr
< 0x400; ioaddr
+= 0x10) {
705 p_dev
->io
.BasePort2
= cf
->io
.win
[0].base
;
706 p_dev
->io
.BasePort1
= ioaddr
;
707 if (!pcmcia_request_io(p_dev
, &p_dev
->io
))
715 xirc2ps_config_check(struct pcmcia_device
*p_dev
,
716 cistpl_cftable_entry_t
*cf
,
717 cistpl_cftable_entry_t
*dflt
,
721 int *pass
= priv_data
;
723 if (cf
->io
.nwin
> 0 && (cf
->io
.win
[0].base
& 0xf) == 8) {
724 p_dev
->io
.BasePort2
= cf
->io
.win
[0].base
;
725 p_dev
->io
.BasePort1
= p_dev
->io
.BasePort2
726 + (*pass
? (cf
->index
& 0x20 ? -24:8)
727 : (cf
->index
& 0x20 ? 8:-24));
728 if (!pcmcia_request_io(p_dev
, &p_dev
->io
))
736 static int pcmcia_get_mac_ce(struct pcmcia_device
*p_dev
,
740 struct net_device
*dev
= priv
;
743 if (tuple
->TupleDataLen
!= 13)
745 if ((tuple
->TupleData
[0] != 2) || (tuple
->TupleData
[1] != 1) ||
746 (tuple
->TupleData
[2] != 6))
748 /* another try (James Lehmer's CE2 version 4.1)*/
749 for (i
= 2; i
< 6; i
++)
750 dev
->dev_addr
[i
] = tuple
->TupleData
[i
+2];
756 * xirc2ps_config() is scheduled to run after a CARD_INSERTION event
757 * is received, to configure the PCMCIA socket, and to make the
758 * ethernet device available to the system.
761 xirc2ps_config(struct pcmcia_device
* link
)
763 struct net_device
*dev
= link
->priv
;
764 local_info_t
*local
= netdev_priv(dev
);
770 local
->dingo_ccr
= NULL
;
772 dev_dbg(&link
->dev
, "config\n");
774 /* Is this a valid card */
775 if (link
->has_manf_id
== 0) {
776 printk(KNOT_XIRC
"manfid not found in CIS\n");
780 switch (link
->manf_id
) {
782 local
->manf_str
= "Xircom";
785 local
->manf_str
= "Accton";
789 local
->manf_str
= "Compaq";
792 local
->manf_str
= "Intel";
795 local
->manf_str
= "Toshiba";
798 printk(KNOT_XIRC
"Unknown Card Manufacturer ID: 0x%04x\n",
799 (unsigned)link
->manf_id
);
802 dev_dbg(&link
->dev
, "found %s card\n", local
->manf_str
);
804 if (!set_card_type(link
)) {
805 printk(KNOT_XIRC
"this card is not supported\n");
809 /* get the ethernet address from the CIS */
810 err
= pcmcia_get_mac_from_cis(link
, dev
);
812 /* not found: try to get the node-id from tuple 0x89 */
814 len
= pcmcia_get_tuple(link
, 0x89, &buf
);
815 /* data layout looks like tuple 0x22 */
816 if (buf
&& len
== 8) {
817 if (*buf
== CISTPL_FUNCE_LAN_NODE_ID
) {
819 for (i
= 2; i
< 6; i
++)
820 dev
->dev_addr
[i
] = buf
[i
+2];
828 err
= pcmcia_loop_tuple(link
, CISTPL_FUNCE
, pcmcia_get_mac_ce
, dev
);
831 printk(KNOT_XIRC
"node-id not found in CIS\n");
835 link
->io
.IOAddrLines
=10;
836 link
->io
.Attributes1
= IO_DATA_PATH_WIDTH_16
;
841 link
->conf
.Attributes
|= CONF_ENABLE_SPKR
;
842 link
->conf
.Status
|= CCSR_AUDIO_ENA
;
844 link
->irq
.Attributes
|= IRQ_TYPE_DYNAMIC_SHARING
;
845 link
->io
.NumPorts2
= 8;
846 link
->io
.Attributes2
= IO_DATA_PATH_WIDTH_8
;
848 /* Take the Modem IO port from the CIS and scan for a free
850 link
->io
.NumPorts1
= 16; /* no Mako stuff anymore */
851 if (!pcmcia_loop_config(link
, xirc2ps_config_modem
, NULL
))
854 link
->io
.NumPorts1
= 18;
855 /* We do 2 passes here: The first one uses the regular mapping and
856 * the second tries again, thereby considering that the 32 ports are
857 * mirrored every 32 bytes. Actually we use a mirrored port for
858 * the Mako if (on the first pass) the COR bit 5 is set.
860 for (pass
=0; pass
< 2; pass
++)
861 if (!pcmcia_loop_config(link
, xirc2ps_config_check
, &pass
))
863 /* if special option:
864 * try to configure as Ethernet only.
867 printk(KNOT_XIRC
"no ports available\n");
869 link
->irq
.Attributes
|= IRQ_TYPE_DYNAMIC_SHARING
;
870 link
->io
.NumPorts1
= 16;
871 for (ioaddr
= 0x300; ioaddr
< 0x400; ioaddr
+= 0x10) {
872 link
->io
.BasePort1
= ioaddr
;
873 if (!(err
=pcmcia_request_io(link
, &link
->io
)))
876 link
->io
.BasePort1
= 0; /* let CS decide */
877 if ((err
=pcmcia_request_io(link
, &link
->io
)))
885 * Now allocate an interrupt line. Note that this does not
886 * actually assign a handler to the interrupt.
888 if ((err
=pcmcia_request_irq(link
, &link
->irq
)))
892 * This actually configures the PCMCIA socket -- setting up
893 * the I/O windows and the interrupt mapping.
895 if ((err
=pcmcia_request_configuration(link
, &link
->conf
)))
903 /* Reset the modem's BAR to the correct value
904 * This is necessary because in the RequestConfiguration call,
905 * the base address of the ethernet port (BasePort1) is written
906 * to the BAR registers of the modem.
908 reg
.Action
= CS_WRITE
;
909 reg
.Offset
= CISREG_IOBASE_0
;
910 reg
.Value
= link
->io
.BasePort2
& 0xff;
911 if ((err
= pcmcia_access_configuration_register(link
, ®
)))
913 reg
.Action
= CS_WRITE
;
914 reg
.Offset
= CISREG_IOBASE_1
;
915 reg
.Value
= (link
->io
.BasePort2
>> 8) & 0xff;
916 if ((err
= pcmcia_access_configuration_register(link
, ®
)))
919 /* There is no config entry for the Ethernet part which
920 * is at 0x0800. So we allocate a window into the attribute
921 * memory and write direct to the CIS registers
923 req
.Attributes
= WIN_DATA_WIDTH_8
|WIN_MEMORY_TYPE_AM
|WIN_ENABLE
;
924 req
.Base
= req
.Size
= 0;
926 if ((err
= pcmcia_request_window(link
, &req
, &link
->win
)))
929 local
->dingo_ccr
= ioremap(req
.Base
,0x1000) + 0x0800;
930 mem
.CardOffset
= 0x0;
932 if ((err
= pcmcia_map_mem_page(link
, link
->win
, &mem
)))
935 /* Setup the CCRs; there are no infos in the CIS about the Ethernet
938 writeb(0x47, local
->dingo_ccr
+ CISREG_COR
);
939 ioaddr
= link
->io
.BasePort1
;
940 writeb(ioaddr
& 0xff , local
->dingo_ccr
+ CISREG_IOBASE_0
);
941 writeb((ioaddr
>> 8)&0xff , local
->dingo_ccr
+ CISREG_IOBASE_1
);
946 printk(KERN_INFO
"ECOR:");
947 for (i
=0; i
< 7; i
++) {
948 tmp
= readb(local
->dingo_ccr
+ i
*2);
949 printk(" %02x", tmp
);
952 printk(KERN_INFO
"DCOR:");
953 for (i
=0; i
< 4; i
++) {
954 tmp
= readb(local
->dingo_ccr
+ 0x20 + i
*2);
955 printk(" %02x", tmp
);
958 printk(KERN_INFO
"SCOR:");
959 for (i
=0; i
< 10; i
++) {
960 tmp
= readb(local
->dingo_ccr
+ 0x40 + i
*2);
961 printk(" %02x", tmp
);
967 writeb(0x01, local
->dingo_ccr
+ 0x20);
968 writeb(0x0c, local
->dingo_ccr
+ 0x22);
969 writeb(0x00, local
->dingo_ccr
+ 0x24);
970 writeb(0x00, local
->dingo_ccr
+ 0x26);
971 writeb(0x00, local
->dingo_ccr
+ 0x28);
974 /* The if_port symbol can be set when the module is loaded */
977 local
->probe_port
= dev
->if_port
= 1;
978 } else if ((if_port
>= 1 && if_port
<= 2) ||
979 (local
->mohawk
&& if_port
==4))
980 dev
->if_port
= if_port
;
982 printk(KNOT_XIRC
"invalid if_port requested\n");
984 /* we can now register the device with the net subsystem */
985 dev
->irq
= link
->irq
.AssignedIRQ
;
986 dev
->base_addr
= link
->io
.BasePort1
;
989 do_reset(dev
, 1); /* a kludge to make the cem56 work */
991 link
->dev_node
= &local
->node
;
992 SET_NETDEV_DEV(dev
, &link
->dev
);
994 if ((err
=register_netdev(dev
))) {
995 printk(KNOT_XIRC
"register_netdev() failed\n");
996 link
->dev_node
= NULL
;
1000 strcpy(local
->node
.dev_name
, dev
->name
);
1002 /* give some infos about the hardware */
1003 printk(KERN_INFO
"%s: %s: port %#3lx, irq %d, hwaddr %pM\n",
1004 dev
->name
, local
->manf_str
,(u_long
)dev
->base_addr
, (int)dev
->irq
,
1010 xirc2ps_release(link
);
1015 } /* xirc2ps_config */
1018 * After a card is removed, xirc2ps_release() will unregister the net
1019 * device, and release the PCMCIA configuration. If the device is
1020 * still open, this will be postponed until it is closed.
1023 xirc2ps_release(struct pcmcia_device
*link
)
1025 dev_dbg(&link
->dev
, "release\n");
1028 struct net_device
*dev
= link
->priv
;
1029 local_info_t
*local
= netdev_priv(dev
);
1031 iounmap(local
->dingo_ccr
- 0x0800);
1033 pcmcia_disable_device(link
);
1034 } /* xirc2ps_release */
1036 /*====================================================================*/
1039 static int xirc2ps_suspend(struct pcmcia_device
*link
)
1041 struct net_device
*dev
= link
->priv
;
1044 netif_device_detach(dev
);
1051 static int xirc2ps_resume(struct pcmcia_device
*link
)
1053 struct net_device
*dev
= link
->priv
;
1057 netif_device_attach(dev
);
1064 /*====================================================================*/
1067 * This is the Interrupt service route.
1070 xirc2ps_interrupt(int irq
, void *dev_id
)
1072 struct net_device
*dev
= (struct net_device
*)dev_id
;
1073 local_info_t
*lp
= netdev_priv(dev
);
1074 unsigned int ioaddr
;
1076 unsigned bytes_rcvd
;
1077 unsigned int_status
, eth_status
, rx_status
, tx_status
;
1078 unsigned rsr
, pktlen
;
1079 ulong start_ticks
= jiffies
; /* fixme: jiffies rollover every 497 days
1080 * is this something to worry about?
1084 if (!netif_device_present(dev
))
1087 ioaddr
= dev
->base_addr
;
1088 if (lp
->mohawk
) { /* must disable the interrupt */
1089 PutByte(XIRCREG_CR
, 0);
1092 pr_debug("%s: interrupt %d at %#x.\n", dev
->name
, irq
, ioaddr
);
1094 saved_page
= GetByte(XIRCREG_PR
);
1095 /* Read the ISR to see whats the cause for the interrupt.
1096 * This also clears the interrupt flags on CE2 cards
1098 int_status
= GetByte(XIRCREG_ISR
);
1101 if (int_status
== 0xff) { /* card may be ejected */
1102 pr_debug("%s: interrupt %d for dead card\n", dev
->name
, irq
);
1105 eth_status
= GetByte(XIRCREG_ESR
);
1108 rx_status
= GetByte(XIRCREG40_RXST0
);
1109 PutByte(XIRCREG40_RXST0
, (~rx_status
& 0xff));
1110 tx_status
= GetByte(XIRCREG40_TXST0
);
1111 tx_status
|= GetByte(XIRCREG40_TXST1
) << 8;
1112 PutByte(XIRCREG40_TXST0
, 0);
1113 PutByte(XIRCREG40_TXST1
, 0);
1115 pr_debug("%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
1116 dev
->name
, int_status
, eth_status
, rx_status
, tx_status
);
1118 /***** receive section ******/
1120 while (eth_status
& FullPktRcvd
) {
1121 rsr
= GetByte(XIRCREG0_RSR
);
1122 if (bytes_rcvd
> maxrx_bytes
&& (rsr
& PktRxOk
)) {
1123 /* too many bytes received during this int, drop the rest of the
1125 dev
->stats
.rx_dropped
++;
1126 pr_debug("%s: RX drop, too much done\n", dev
->name
);
1127 } else if (rsr
& PktRxOk
) {
1128 struct sk_buff
*skb
;
1130 pktlen
= GetWord(XIRCREG0_RBC
);
1131 bytes_rcvd
+= pktlen
;
1133 pr_debug("rsr=%#02x packet_length=%u\n", rsr
, pktlen
);
1135 skb
= dev_alloc_skb(pktlen
+3); /* 1 extra so we can use insw */
1137 printk(KNOT_XIRC
"low memory, packet dropped (size=%u)\n",
1139 dev
->stats
.rx_dropped
++;
1140 } else { /* okay get the packet */
1141 skb_reserve(skb
, 2);
1142 if (lp
->silicon
== 0 ) { /* work around a hardware bug */
1143 unsigned rhsa
; /* receive start address */
1146 rhsa
= GetWord(XIRCREG5_RHSA0
);
1148 rhsa
+= 3; /* skip control infos */
1151 if (rhsa
+ pktlen
> 0x8000) {
1153 u_char
*buf
= skb_put(skb
, pktlen
);
1154 for (i
=0; i
< pktlen
; i
++, rhsa
++) {
1155 buf
[i
] = GetByte(XIRCREG_EDP
);
1156 if (rhsa
== 0x8000) {
1162 insw(ioaddr
+XIRCREG_EDP
,
1163 skb_put(skb
, pktlen
), (pktlen
+1)>>1);
1167 else if (lp
->mohawk
) {
1168 /* To use this 32 bit access we should use
1169 * a manual optimized loop
1170 * Also the words are swapped, we can get more
1171 * performance by using 32 bit access and swapping
1172 * the words in a register. Will need this for cardbus
1174 * Note: don't forget to change the ALLOC_SKB to .. +3
1177 u_long
*p
= skb_put(skb
, pktlen
);
1179 unsigned int edpreg
= ioaddr
+XIRCREG_EDP
-2;
1180 for (i
=0; i
< len
; i
+= 4, p
++) {
1182 __asm__("rorl $16,%0\n\t"
1190 insw(ioaddr
+XIRCREG_EDP
, skb_put(skb
, pktlen
),
1193 skb
->protocol
= eth_type_trans(skb
, dev
);
1195 dev
->stats
.rx_packets
++;
1196 dev
->stats
.rx_bytes
+= pktlen
;
1197 if (!(rsr
& PhyPkt
))
1198 dev
->stats
.multicast
++;
1200 } else { /* bad packet */
1201 pr_debug("rsr=%#02x\n", rsr
);
1203 if (rsr
& PktTooLong
) {
1204 dev
->stats
.rx_frame_errors
++;
1205 pr_debug("%s: Packet too long\n", dev
->name
);
1208 dev
->stats
.rx_crc_errors
++;
1209 pr_debug("%s: CRC error\n", dev
->name
);
1211 if (rsr
& AlignErr
) {
1212 dev
->stats
.rx_fifo_errors
++; /* okay ? */
1213 pr_debug("%s: Alignment error\n", dev
->name
);
1216 /* clear the received/dropped/error packet */
1217 PutWord(XIRCREG0_DO
, 0x8000); /* issue cmd: skip_rx_packet */
1219 /* get the new ethernet status */
1220 eth_status
= GetByte(XIRCREG_ESR
);
1222 if (rx_status
& 0x10) { /* Receive overrun */
1223 dev
->stats
.rx_over_errors
++;
1224 PutByte(XIRCREG_CR
, ClearRxOvrun
);
1225 pr_debug("receive overrun cleared\n");
1228 /***** transmit section ******/
1229 if (int_status
& PktTxed
) {
1232 n
= lp
->last_ptr_value
;
1233 nn
= GetByte(XIRCREG0_PTR
);
1234 lp
->last_ptr_value
= nn
;
1235 if (nn
< n
) /* rollover */
1236 dev
->stats
.tx_packets
+= 256 - n
;
1237 else if (n
== nn
) { /* happens sometimes - don't know why */
1238 pr_debug("PTR not changed?\n");
1240 dev
->stats
.tx_packets
+= lp
->last_ptr_value
- n
;
1241 netif_wake_queue(dev
);
1243 if (tx_status
& 0x0002) { /* Execessive collissions */
1244 pr_debug("tx restarted due to execssive collissions\n");
1245 PutByte(XIRCREG_CR
, RestartTx
); /* restart transmitter process */
1247 if (tx_status
& 0x0040)
1248 dev
->stats
.tx_aborted_errors
++;
1250 /* recalculate our work chunk so that we limit the duration of this
1251 * ISR to about 1/10 of a second.
1252 * Calculate only if we received a reasonable amount of bytes.
1254 if (bytes_rcvd
> 1000) {
1255 u_long duration
= jiffies
- start_ticks
;
1257 if (duration
>= HZ
/10) { /* if more than about 1/10 second */
1258 maxrx_bytes
= (bytes_rcvd
* (HZ
/10)) / duration
;
1259 if (maxrx_bytes
< 2000)
1261 else if (maxrx_bytes
> 22000)
1262 maxrx_bytes
= 22000;
1263 pr_debug("set maxrx=%u (rcvd=%u ticks=%lu)\n",
1264 maxrx_bytes
, bytes_rcvd
, duration
);
1265 } else if (!duration
&& maxrx_bytes
< 22000) {
1266 /* now much faster */
1267 maxrx_bytes
+= 2000;
1268 if (maxrx_bytes
> 22000)
1269 maxrx_bytes
= 22000;
1270 pr_debug("set maxrx=%u\n", maxrx_bytes
);
1276 if (int_status
!= 0xff && (int_status
= GetByte(XIRCREG_ISR
)) != 0)
1279 SelectPage(saved_page
);
1280 PutByte(XIRCREG_CR
, EnableIntr
); /* re-enable interrupts */
1281 /* Instead of dropping packets during a receive, we could
1282 * force an interrupt with this command:
1283 * PutByte(XIRCREG_CR, EnableIntr|ForceIntr);
1286 } /* xirc2ps_interrupt */
1288 /*====================================================================*/
1291 xirc2ps_tx_timeout_task(struct work_struct
*work
)
1293 local_info_t
*local
=
1294 container_of(work
, local_info_t
, tx_timeout_task
);
1295 struct net_device
*dev
= local
->dev
;
1296 /* reset the card */
1298 dev
->trans_start
= jiffies
;
1299 netif_wake_queue(dev
);
1303 xirc_tx_timeout(struct net_device
*dev
)
1305 local_info_t
*lp
= netdev_priv(dev
);
1306 dev
->stats
.tx_errors
++;
1307 printk(KERN_NOTICE
"%s: transmit timed out\n", dev
->name
);
1308 schedule_work(&lp
->tx_timeout_task
);
1312 do_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
1314 local_info_t
*lp
= netdev_priv(dev
);
1315 unsigned int ioaddr
= dev
->base_addr
;
1318 unsigned pktlen
= skb
->len
;
1320 pr_debug("do_start_xmit(skb=%p, dev=%p) len=%u\n",
1324 /* adjust the packet length to min. required
1325 * and hope that the buffer is large enough
1326 * to provide some random data.
1327 * fixme: For Mohawk we can change this by sending
1328 * a larger packetlen than we actually have; the chip will
1329 * pad this in his buffer with random bytes
1331 if (pktlen
< ETH_ZLEN
)
1333 if (skb_padto(skb
, ETH_ZLEN
))
1334 return NETDEV_TX_OK
;
1338 netif_stop_queue(dev
);
1340 PutWord(XIRCREG0_TRS
, (u_short
)pktlen
+2);
1341 freespace
= GetWord(XIRCREG0_TSO
);
1342 okay
= freespace
& 0x8000;
1343 freespace
&= 0x7fff;
1344 /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */
1345 okay
= pktlen
+2 < freespace
;
1346 pr_debug("%s: avail. tx space=%u%s\n",
1347 dev
->name
, freespace
, okay
? " (okay)":" (not enough)");
1348 if (!okay
) { /* not enough space */
1349 return NETDEV_TX_BUSY
; /* upper layer may decide to requeue this packet */
1351 /* send the packet */
1352 PutWord(XIRCREG_EDP
, (u_short
)pktlen
);
1353 outsw(ioaddr
+XIRCREG_EDP
, skb
->data
, pktlen
>>1);
1355 PutByte(XIRCREG_EDP
, skb
->data
[pktlen
-1]);
1358 PutByte(XIRCREG_CR
, TransmitPacket
|EnableIntr
);
1360 dev_kfree_skb (skb
);
1361 dev
->trans_start
= jiffies
;
1362 dev
->stats
.tx_bytes
+= pktlen
;
1363 netif_start_queue(dev
);
1364 return NETDEV_TX_OK
;
1368 * Set all addresses: This first one is the individual address,
1369 * the next 9 addresses are taken from the multicast list and
1370 * the rest is filled with the individual address.
1373 set_addresses(struct net_device
*dev
)
1375 unsigned int ioaddr
= dev
->base_addr
;
1376 local_info_t
*lp
= netdev_priv(dev
);
1377 struct dev_mc_list
*dmi
= dev
->mc_list
;
1378 unsigned char *addr
;
1382 for (i
=0,j
=8,n
=0; ; i
++, j
++) {
1387 if (n
> 1 && n
<= netdev_mc_count(dev
) && dmi
) {
1397 if (n
&& n
<= netdev_mc_count(dev
) && dmi
)
1398 addr
= dmi
->dmi_addr
;
1400 addr
= dev
->dev_addr
;
1403 PutByte(j
, addr
[5-i
]);
1405 PutByte(j
, addr
[i
]);
1411 * Set or clear the multicast filter for this adaptor.
1412 * We can filter up to 9 addresses, if more are requested we set
1413 * multicast promiscuous mode.
1417 set_multicast_list(struct net_device
*dev
)
1419 unsigned int ioaddr
= dev
->base_addr
;
1423 value
= GetByte(XIRCREG42_SWC1
) & 0xC0;
1425 if (dev
->flags
& IFF_PROMISC
) { /* snoop */
1426 PutByte(XIRCREG42_SWC1
, value
| 0x06); /* set MPE and PME */
1427 } else if (netdev_mc_count(dev
) > 9 || (dev
->flags
& IFF_ALLMULTI
)) {
1428 PutByte(XIRCREG42_SWC1
, value
| 0x02); /* set MPE */
1429 } else if (!netdev_mc_empty(dev
)) {
1430 /* the chip can filter 9 addresses perfectly */
1431 PutByte(XIRCREG42_SWC1
, value
| 0x01);
1433 PutByte(XIRCREG40_CMD0
, Offline
);
1436 PutByte(XIRCREG40_CMD0
, EnableRecv
| Online
);
1437 } else { /* standard usage */
1438 PutByte(XIRCREG42_SWC1
, value
| 0x00);
1444 do_config(struct net_device
*dev
, struct ifmap
*map
)
1446 local_info_t
*local
= netdev_priv(dev
);
1448 pr_debug("do_config(%p)\n", dev
);
1449 if (map
->port
!= 255 && map
->port
!= dev
->if_port
) {
1453 local
->probe_port
= 1;
1456 local
->probe_port
= 0;
1457 dev
->if_port
= map
->port
;
1459 printk(KERN_INFO
"%s: switching to %s port\n",
1460 dev
->name
, if_names
[dev
->if_port
]);
1461 do_reset(dev
,1); /* not the fine way :-) */
1470 do_open(struct net_device
*dev
)
1472 local_info_t
*lp
= netdev_priv(dev
);
1473 struct pcmcia_device
*link
= lp
->p_dev
;
1475 dev_dbg(&link
->dev
, "do_open(%p)\n", dev
);
1477 /* Check that the PCMCIA card is still here. */
1478 /* Physical device present signature. */
1479 if (!pcmcia_dev_present(link
))
1485 netif_start_queue(dev
);
1491 static void netdev_get_drvinfo(struct net_device
*dev
,
1492 struct ethtool_drvinfo
*info
)
1494 strcpy(info
->driver
, "xirc2ps_cs");
1495 sprintf(info
->bus_info
, "PCMCIA 0x%lx", dev
->base_addr
);
1498 static const struct ethtool_ops netdev_ethtool_ops
= {
1499 .get_drvinfo
= netdev_get_drvinfo
,
1503 do_ioctl(struct net_device
*dev
, struct ifreq
*rq
, int cmd
)
1505 local_info_t
*local
= netdev_priv(dev
);
1506 unsigned int ioaddr
= dev
->base_addr
;
1507 struct mii_ioctl_data
*data
= if_mii(rq
);
1509 pr_debug("%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
1510 dev
->name
, rq
->ifr_ifrn
.ifrn_name
, cmd
,
1511 data
->phy_id
, data
->reg_num
, data
->val_in
, data
->val_out
);
1517 case SIOCGMIIPHY
: /* Get the address of the PHY in use. */
1518 data
->phy_id
= 0; /* we have only this address */
1520 case SIOCGMIIREG
: /* Read the specified MII register. */
1521 data
->val_out
= mii_rd(ioaddr
, data
->phy_id
& 0x1f,
1522 data
->reg_num
& 0x1f);
1524 case SIOCSMIIREG
: /* Write the specified MII register */
1525 mii_wr(ioaddr
, data
->phy_id
& 0x1f, data
->reg_num
& 0x1f, data
->val_in
,
1535 hardreset(struct net_device
*dev
)
1537 local_info_t
*local
= netdev_priv(dev
);
1538 unsigned int ioaddr
= dev
->base_addr
;
1542 PutByte(XIRCREG4_GPR1
, 0); /* clear bit 0: power down */
1543 msleep(40); /* wait 40 msec */
1545 PutByte(XIRCREG4_GPR1
, 1); /* set bit 0: power up */
1547 PutByte(XIRCREG4_GPR1
, 1 | 4); /* set bit 0: power up, bit 2: AIC */
1548 msleep(20); /* wait 20 msec */
1552 do_reset(struct net_device
*dev
, int full
)
1554 local_info_t
*local
= netdev_priv(dev
);
1555 unsigned int ioaddr
= dev
->base_addr
;
1558 pr_debug("%s: do_reset(%p,%d)\n", dev
? dev
->name
:"eth?", dev
, full
);
1561 PutByte(XIRCREG_CR
, SoftReset
); /* set */
1562 msleep(20); /* wait 20 msec */
1563 PutByte(XIRCREG_CR
, 0); /* clear */
1564 msleep(40); /* wait 40 msec */
1565 if (local
->mohawk
) {
1567 /* set pin GP1 and GP2 to output (0x0c)
1568 * set GP1 to low to power up the ML6692 (0x00)
1569 * set GP2 to high to power up the 10Mhz chip (0x02)
1571 PutByte(XIRCREG4_GPR0
, 0x0e);
1574 /* give the circuits some time to power up */
1575 msleep(500); /* about 500ms */
1577 local
->last_ptr_value
= 0;
1578 local
->silicon
= local
->mohawk
? (GetByte(XIRCREG4_BOV
) & 0x70) >> 4
1579 : (GetByte(XIRCREG4_BOV
) & 0x30) >> 4;
1581 if (local
->probe_port
) {
1582 if (!local
->mohawk
) {
1584 PutByte(XIRCREG4_GPR0
, 4);
1585 local
->probe_port
= 0;
1587 } else if (dev
->if_port
== 2) { /* enable 10Base2 */
1589 PutByte(XIRCREG42_SWC1
, 0xC0);
1590 } else { /* enable 10BaseT */
1592 PutByte(XIRCREG42_SWC1
, 0x80);
1594 msleep(40); /* wait 40 msec to let it complete */
1599 value
= GetByte(XIRCREG_ESR
); /* read the ESR */
1600 printk(KERN_DEBUG
"%s: ESR is: %#02x\n", dev
->name
, value
);
1606 PutByte(XIRCREG1_IMR0
, 0xff); /* allow all ints */
1607 PutByte(XIRCREG1_IMR1
, 1 ); /* and Set TxUnderrunDetect */
1608 value
= GetByte(XIRCREG1_ECR
);
1611 value
|= DisableLinkPulse
;
1612 PutByte(XIRCREG1_ECR
, value
);
1614 pr_debug("%s: ECR is: %#02x\n", dev
->name
, value
);
1617 PutByte(XIRCREG42_SWC0
, 0x20); /* disable source insertion */
1619 if (local
->silicon
!= 1) {
1620 /* set the local memory dividing line.
1621 * The comments in the sample code say that this is only
1622 * settable with the scipper version 2 which is revision 0.
1623 * Always for CE3 cards
1626 PutWord(XIRCREG2_RBS
, 0x2000);
1632 /* Hardware workaround:
1633 * The receive byte pointer after reset is off by 1 so we need
1634 * to move the offset pointer back to 0.
1637 PutWord(XIRCREG0_DO
, 0x2000); /* change offset command, off=0 */
1639 /* setup MAC IMRs and clear status registers */
1640 SelectPage(0x40); /* Bit 7 ... bit 0 */
1641 PutByte(XIRCREG40_RMASK0
, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */
1642 PutByte(XIRCREG40_TMASK0
, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1643 PutByte(XIRCREG40_TMASK1
, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/
1644 PutByte(XIRCREG40_RXST0
, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */
1645 PutByte(XIRCREG40_TXST0
, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1646 PutByte(XIRCREG40_TXST1
, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */
1648 if (full
&& local
->mohawk
&& init_mii(dev
)) {
1649 if (dev
->if_port
== 4 || local
->dingo
|| local
->new_mii
) {
1650 printk(KERN_INFO
"%s: MII selected\n", dev
->name
);
1652 PutByte(XIRCREG2_MSR
, GetByte(XIRCREG2_MSR
) | 0x08);
1655 printk(KERN_INFO
"%s: MII detected; using 10mbs\n",
1658 if (dev
->if_port
== 2) /* enable 10Base2 */
1659 PutByte(XIRCREG42_SWC1
, 0xC0);
1660 else /* enable 10BaseT */
1661 PutByte(XIRCREG42_SWC1
, 0x80);
1662 msleep(40); /* wait 40 msec to let it complete */
1665 PutByte(XIRCREG1_ECR
, GetByte(XIRCREG1_ECR
| FullDuplex
));
1666 } else { /* No MII */
1668 value
= GetByte(XIRCREG_ESR
); /* read the ESR */
1669 dev
->if_port
= (value
& MediaSelect
) ? 1 : 2;
1672 /* configure the LEDs */
1674 if (dev
->if_port
== 1 || dev
->if_port
== 4) /* TP: Link and Activity */
1675 PutByte(XIRCREG2_LED
, 0x3b);
1676 else /* Coax: Not-Collision and Activity */
1677 PutByte(XIRCREG2_LED
, 0x3a);
1680 PutByte(0x0b, 0x04); /* 100 Mbit LED */
1682 /* enable receiver and put the mac online */
1684 set_multicast_list(dev
);
1686 PutByte(XIRCREG40_CMD0
, EnableRecv
| Online
);
1689 /* setup Ethernet IMR and enable interrupts */
1691 PutByte(XIRCREG1_IMR0
, 0xff);
1694 PutByte(XIRCREG_CR
, EnableIntr
);
1695 if (local
->modem
&& !local
->dingo
) { /* do some magic */
1696 if (!(GetByte(0x10) & 0x01))
1697 PutByte(0x10, 0x11); /* unmask master-int bit */
1701 printk(KERN_INFO
"%s: media %s, silicon revision %d\n",
1702 dev
->name
, if_names
[dev
->if_port
], local
->silicon
);
1703 /* We should switch back to page 0 to avoid a bug in revision 0
1704 * where regs with offset below 8 can't be read after an access
1705 * to the MAC registers */
1710 * Initialize the Media-Independent-Interface
1711 * Returns: True if we have a good MII
1714 init_mii(struct net_device
*dev
)
1716 local_info_t
*local
= netdev_priv(dev
);
1717 unsigned int ioaddr
= dev
->base_addr
;
1718 unsigned control
, status
, linkpartner
;
1721 if (if_port
== 4 || if_port
== 1) { /* force 100BaseT or 10BaseT */
1722 dev
->if_port
= if_port
;
1723 local
->probe_port
= 0;
1727 status
= mii_rd(ioaddr
, 0, 1);
1728 if ((status
& 0xff00) != 0x7800)
1729 return 0; /* No MII */
1731 local
->new_mii
= (mii_rd(ioaddr
, 0, 2) != 0xffff);
1733 if (local
->probe_port
)
1734 control
= 0x1000; /* auto neg */
1735 else if (dev
->if_port
== 4)
1736 control
= 0x2000; /* no auto neg, 100mbs mode */
1738 control
= 0x0000; /* no auto neg, 10mbs mode */
1739 mii_wr(ioaddr
, 0, 0, control
, 16);
1741 control
= mii_rd(ioaddr
, 0, 0);
1743 if (control
& 0x0400) {
1744 printk(KERN_NOTICE
"%s can't take PHY out of isolation mode\n",
1746 local
->probe_port
= 0;
1750 if (local
->probe_port
) {
1751 /* according to the DP83840A specs the auto negotiation process
1752 * may take up to 3.5 sec, so we use this also for our ML6692
1753 * Fixme: Better to use a timer here!
1755 for (i
=0; i
< 35; i
++) {
1756 msleep(100); /* wait 100 msec */
1757 status
= mii_rd(ioaddr
, 0, 1);
1758 if ((status
& 0x0020) && (status
& 0x0004))
1762 if (!(status
& 0x0020)) {
1763 printk(KERN_INFO
"%s: autonegotiation failed;"
1764 " using 10mbs\n", dev
->name
);
1765 if (!local
->new_mii
) {
1767 mii_wr(ioaddr
, 0, 0, control
, 16);
1770 dev
->if_port
= (GetByte(XIRCREG_ESR
) & MediaSelect
) ? 1 : 2;
1773 linkpartner
= mii_rd(ioaddr
, 0, 5);
1774 printk(KERN_INFO
"%s: MII link partner: %04x\n",
1775 dev
->name
, linkpartner
);
1776 if (linkpartner
& 0x0080) {
1787 do_powerdown(struct net_device
*dev
)
1790 unsigned int ioaddr
= dev
->base_addr
;
1792 pr_debug("do_powerdown(%p)\n", dev
);
1795 PutByte(XIRCREG4_GPR1
, 0); /* clear bit 0: power down */
1800 do_stop(struct net_device
*dev
)
1802 unsigned int ioaddr
= dev
->base_addr
;
1803 local_info_t
*lp
= netdev_priv(dev
);
1804 struct pcmcia_device
*link
= lp
->p_dev
;
1806 dev_dbg(&link
->dev
, "do_stop(%p)\n", dev
);
1811 netif_stop_queue(dev
);
1814 PutByte(XIRCREG_CR
, 0); /* disable interrupts */
1816 PutByte(XIRCREG1_IMR0
, 0x00); /* forbid all ints */
1818 PutByte(XIRCREG4_GPR1
, 0); /* clear bit 0: power down */
1825 static struct pcmcia_device_id xirc2ps_ids
[] = {
1826 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0089, 0x110a),
1827 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0138, 0x110a),
1828 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
1829 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
1830 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
1831 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
1832 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
1833 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
1834 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a),
1835 PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2),
1836 PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37),
1837 PCMCIA_DEVICE_PROD_ID13("Xircom", "PS-CE2-10", 0x2e3ee845, 0x947d9073),
1838 PCMCIA_DEVICE_PROD_ID13("Xircom", "R2E-100BTX", 0x2e3ee845, 0x2464a6e3),
1839 PCMCIA_DEVICE_PROD_ID13("Xircom", "RE-10", 0x2e3ee845, 0x3e08d609),
1840 PCMCIA_DEVICE_PROD_ID13("Xircom", "XE2000", 0x2e3ee845, 0xf7188e46),
1841 PCMCIA_DEVICE_PROD_ID12("Compaq", "Ethernet LAN Card", 0x54f7c49c, 0x9fd2f0a2),
1842 PCMCIA_DEVICE_PROD_ID12("Compaq", "Netelligent 10/100 PC Card", 0x54f7c49c, 0xefe96769),
1843 PCMCIA_DEVICE_PROD_ID12("Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16", 0x816cc815, 0x174397db),
1844 PCMCIA_DEVICE_PROD_ID12("Toshiba", "10/100 Ethernet PC Card", 0x44a09d9c, 0xb44deecf),
1845 /* also matches CFE-10 cards! */
1846 /* PCMCIA_DEVICE_MANF_CARD(0x0105, 0x010a), */
1849 MODULE_DEVICE_TABLE(pcmcia
, xirc2ps_ids
);
1852 static struct pcmcia_driver xirc2ps_cs_driver
= {
1853 .owner
= THIS_MODULE
,
1855 .name
= "xirc2ps_cs",
1857 .probe
= xirc2ps_probe
,
1858 .remove
= xirc2ps_detach
,
1859 .id_table
= xirc2ps_ids
,
1860 .suspend
= xirc2ps_suspend
,
1861 .resume
= xirc2ps_resume
,
1865 init_xirc2ps_cs(void)
1867 return pcmcia_register_driver(&xirc2ps_cs_driver
);
1871 exit_xirc2ps_cs(void)
1873 pcmcia_unregister_driver(&xirc2ps_cs_driver
);
1876 module_init(init_xirc2ps_cs
);
1877 module_exit(exit_xirc2ps_cs
);
1880 static int __init
setup_xirc2ps_cs(char *str
)
1882 /* if_port, full_duplex, do_sound, lockup_hack
1884 int ints
[10] = { -1 };
1886 str
= get_options(str
, 9, ints
);
1888 #define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; }
1889 MAYBE_SET(if_port
, 3);
1890 MAYBE_SET(full_duplex
, 4);
1891 MAYBE_SET(do_sound
, 5);
1892 MAYBE_SET(lockup_hack
, 6);
1898 __setup("xirc2ps_cs=", setup_xirc2ps_cs
);