1 /* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03)
2 * Xircom CreditCard Ethernet Adapter IIps driver
3 * Xircom Realport 10/100 (RE-100) driver
5 * This driver supports various Xircom CreditCard Ethernet adapters
6 * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56,
7 * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100.
9 * 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not
10 * autodetect the media properly. In this case use the
11 * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options
12 * to force the media type.
14 * Written originally by Werner Koch based on David Hinds' skeleton of the
17 * Copyright (c) 1997,1998 Werner Koch (dd9jn)
19 * This driver is free software; you can redistribute it and/or modify
20 * it under the terms of the GNU General Public License as published by
21 * the Free Software Foundation; either version 2 of the License, or
22 * (at your option) any later version.
24 * It is distributed in the hope that it will be useful,
25 * but WITHOUT ANY WARRANTY; without even the implied warranty of
26 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
27 * GNU General Public License for more details.
29 * You should have received a copy of the GNU General Public License
30 * along with this program; if not, write to the Free Software
31 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
34 * ALTERNATIVELY, this driver may be distributed under the terms of
35 * the following license, in which case the provisions of this license
36 * are required INSTEAD OF the GNU General Public License. (This clause
37 * is necessary due to a potential bad interaction between the GPL and
38 * the restrictions contained in a BSD-style copyright.)
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
43 * 1. Redistributions of source code must retain the above copyright
44 * notice, and the entire permission notice in its entirety,
45 * including the disclaimer of warranties.
46 * 2. Redistributions in binary form must reproduce the above copyright
47 * notice, this list of conditions and the following disclaimer in the
48 * documentation and/or other materials provided with the distribution.
49 * 3. The name of the author may not be used to endorse or promote
50 * products derived from this software without specific prior
53 * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
54 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
55 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
56 * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
57 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
58 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
59 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
60 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
61 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
62 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
63 * OF THE POSSIBILITY OF SUCH DAMAGE.
66 #include <linux/module.h>
67 #include <linux/kernel.h>
68 #include <linux/init.h>
69 #include <linux/ptrace.h>
70 #include <linux/slab.h>
71 #include <linux/string.h>
72 #include <linux/timer.h>
73 #include <linux/interrupt.h>
75 #include <linux/delay.h>
76 #include <linux/ethtool.h>
77 #include <linux/netdevice.h>
78 #include <linux/etherdevice.h>
79 #include <linux/skbuff.h>
80 #include <linux/if_arp.h>
81 #include <linux/ioport.h>
82 #include <linux/bitops.h>
83 #include <linux/mii.h>
85 #include <pcmcia/cs.h>
86 #include <pcmcia/cistpl.h>
87 #include <pcmcia/cisreg.h>
88 #include <pcmcia/ciscode.h>
91 #include <asm/system.h>
92 #include <asm/uaccess.h>
95 #define MANFID_COMPAQ 0x0138
96 #define MANFID_COMPAQ2 0x0183 /* is this correct? */
99 #include <pcmcia/ds.h>
101 /* Time in jiffies before concluding Tx hung */
102 #define TX_TIMEOUT ((400*HZ)/1000)
105 * Some constants used to access the hardware
108 /* Register offsets and value constans */
109 #define XIRCREG_CR 0 /* Command register (wr) */
111 TransmitPacket
= 0x01,
119 #define XIRCREG_ESR 0 /* Ethernet status register (rd) */
121 FullPktRcvd
= 0x01, /* full packet in receive buffer */
122 PktRejected
= 0x04, /* a packet has been rejected */
123 TxPktPend
= 0x08, /* TX Packet Pending */
124 IncorPolarity
= 0x10,
125 MediaSelect
= 0x20 /* set if TP, clear if AUI */
127 #define XIRCREG_PR 1 /* Page Register select */
128 #define XIRCREG_EDP 4 /* Ethernet Data Port Register */
129 #define XIRCREG_ISR 6 /* Ethernet Interrupt Status Register */
131 TxBufOvr
= 0x01, /* TX Buffer Overflow */
132 PktTxed
= 0x02, /* Packet Transmitted */
133 MACIntr
= 0x04, /* MAC Interrupt occurred */
134 TxResGrant
= 0x08, /* Tx Reservation Granted */
135 RxFullPkt
= 0x20, /* Rx Full Packet */
136 RxPktRej
= 0x40, /* Rx Packet Rejected */
137 ForcedIntr
= 0x80 /* Forced Interrupt */
139 #define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/
140 #define XIRCREG1_IMR1 13
141 #define XIRCREG0_TSO 8 /* Transmit Space Open Register (on page 0)*/
142 #define XIRCREG0_TRS 10 /* Transmit reservation Size Register (page 0)*/
143 #define XIRCREG0_DO 12 /* Data Offset Register (page 0) (wr) */
144 #define XIRCREG0_RSR 12 /* Receive Status Register (page 0) (rd) */
146 PhyPkt
= 0x01, /* set:physical packet, clear: multicast packet */
147 BrdcstPkt
= 0x02, /* set if it is a broadcast packet */
148 PktTooLong
= 0x04, /* set if packet length > 1518 */
149 AlignErr
= 0x10, /* incorrect CRC and last octet not complete */
150 CRCErr
= 0x20, /* incorrect CRC and last octet is complete */
151 PktRxOk
= 0x80 /* received ok */
153 #define XIRCREG0_PTR 13 /* packets transmitted register (rd) */
154 #define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */
155 #define XIRCREG1_ECR 14 /* ethernet configurationn register */
157 FullDuplex
= 0x04, /* enable full duplex mode */
158 LongTPMode
= 0x08, /* adjust for longer lengths of TP cable */
159 DisablePolCor
= 0x10,/* disable auto polarity correction */
160 DisableLinkPulse
= 0x20, /* disable link pulse generation */
161 DisableAutoTx
= 0x40, /* disable auto-transmit */
163 #define XIRCREG2_RBS 8 /* receive buffer start register */
164 #define XIRCREG2_LED 10 /* LED Configuration register */
165 /* values for the leds: Bits 2-0 for led 1
166 * 0 disabled Bits 5-3 for led 2
175 #define XIRCREG2_MSR 12 /* Mohawk specific register */
177 #define XIRCREG4_GPR0 8 /* General Purpose Register 0 */
178 #define XIRCREG4_GPR1 9 /* General Purpose Register 1 */
179 #define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/
180 #define XIRCREG4_BOV 10 /* Bonding Version Register */
181 #define XIRCREG4_LMA 12 /* Local Memory Address Register */
182 #define XIRCREG4_LMD 14 /* Local Memory Data Port */
183 /* MAC register can only by accessed with 8 bit operations */
184 #define XIRCREG40_CMD0 8 /* Command Register (wr) */
185 enum xirc_cmd
{ /* Commands */
194 #define XIRCREG5_RHSA0 10 /* Rx Host Start Address */
195 #define XIRCREG40_RXST0 9 /* Receive Status Register */
196 #define XIRCREG40_TXST0 11 /* Transmit Status Register 0 */
197 #define XIRCREG40_TXST1 12 /* Transmit Status Register 10 */
198 #define XIRCREG40_RMASK0 13 /* Receive Mask Register */
199 #define XIRCREG40_TMASK0 14 /* Transmit Mask Register 0 */
200 #define XIRCREG40_TMASK1 15 /* Transmit Mask Register 0 */
201 #define XIRCREG42_SWC0 8 /* Software Configuration 0 */
202 #define XIRCREG42_SWC1 9 /* Software Configuration 1 */
203 #define XIRCREG42_BOC 10 /* Back-Off Configuration */
204 #define XIRCREG44_TDR0 8 /* Time Domain Reflectometry 0 */
205 #define XIRCREG44_TDR1 9 /* Time Domain Reflectometry 1 */
206 #define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */
207 #define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */
208 #define XIRCREG45_REV 15 /* Revision Register (rd) */
209 #define XIRCREG50_IA 8 /* Individual Address (8-13) */
211 static const char *if_names
[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
214 #define KDBG_XIRC KERN_DEBUG "xirc2ps_cs: "
215 #define KERR_XIRC KERN_ERR "xirc2ps_cs: "
216 #define KWRN_XIRC KERN_WARNING "xirc2ps_cs: "
217 #define KNOT_XIRC KERN_NOTICE "xirc2ps_cs: "
218 #define KINF_XIRC KERN_INFO "xirc2ps_cs: "
221 #define XIR_UNKNOWN 0 /* unknown: not supported */
222 #define XIR_CE 1 /* (prodid 1) different hardware: not supported */
223 #define XIR_CE2 2 /* (prodid 2) */
224 #define XIR_CE3 3 /* (prodid 3) */
225 #define XIR_CEM 4 /* (prodid 1) different hardware: not supported */
226 #define XIR_CEM2 5 /* (prodid 2) */
227 #define XIR_CEM3 6 /* (prodid 3) */
228 #define XIR_CEM33 7 /* (prodid 4) */
229 #define XIR_CEM56M 8 /* (prodid 5) */
230 #define XIR_CEM56 9 /* (prodid 6) */
231 #define XIR_CM28 10 /* (prodid 3) modem only: not supported here */
232 #define XIR_CM33 11 /* (prodid 4) modem only: not supported here */
233 #define XIR_CM56 12 /* (prodid 5) modem only: not supported here */
234 #define XIR_CG 13 /* (prodid 1) GSM modem only: not supported */
235 #define XIR_CBE 14 /* (prodid 1) cardbus ethernet: not supported */
236 /*====================================================================*/
238 /* Module parameters */
240 MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver");
241 MODULE_LICENSE("Dual MPL/GPL");
243 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
245 INT_MODULE_PARM(if_port
, 0);
246 INT_MODULE_PARM(full_duplex
, 0);
247 INT_MODULE_PARM(do_sound
, 1);
248 INT_MODULE_PARM(lockup_hack
, 0); /* anti lockup hack */
250 /*====================================================================*/
252 /* We do not process more than these number of bytes during one
253 * interrupt. (Of course we receive complete packets, so this is not
255 * Something between 2000..22000; first value gives best interrupt latency,
256 * the second enables the usage of the complete on-chip buffer. We use the
257 * high value as the initial value.
259 static unsigned maxrx_bytes
= 22000;
261 /* MII management prototypes */
262 static void mii_idle(unsigned int ioaddr
);
263 static void mii_putbit(unsigned int ioaddr
, unsigned data
);
264 static int mii_getbit(unsigned int ioaddr
);
265 static void mii_wbits(unsigned int ioaddr
, unsigned data
, int len
);
266 static unsigned mii_rd(unsigned int ioaddr
, u_char phyaddr
, u_char phyreg
);
267 static void mii_wr(unsigned int ioaddr
, u_char phyaddr
, u_char phyreg
,
268 unsigned data
, int len
);
271 * The event() function is this driver's Card Services event handler.
272 * It will be called by Card Services when an appropriate card status
273 * event is received. The config() and release() entry points are
274 * used to configure or release a socket, in response to card insertion
275 * and ejection events. They are invoked from the event handler.
278 static int has_ce2_string(struct pcmcia_device
* link
);
279 static int xirc2ps_config(struct pcmcia_device
* link
);
280 static void xirc2ps_release(struct pcmcia_device
* link
);
283 * The attach() and detach() entry points are used to create and destroy
284 * "instances" of the driver, where each instance represents everything
285 * needed to manage one actual PCMCIA card.
288 static void xirc2ps_detach(struct pcmcia_device
*p_dev
);
291 * You'll also need to prototype all the functions that will actually
292 * be used to talk to your device. See 'pcmem_cs' for a good example
293 * of a fully self-sufficient driver; the other drivers rely more or
294 * less on other parts of the kernel.
297 static irqreturn_t
xirc2ps_interrupt(int irq
, void *dev_id
);
299 typedef struct local_info_t
{
300 struct net_device
*dev
;
301 struct pcmcia_device
*p_dev
;
305 int silicon
; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */
306 int mohawk
; /* a CE3 type card */
307 int dingo
; /* a CEM56 type card */
308 int new_mii
; /* has full 10baseT/100baseT MII */
309 int modem
; /* is a multi function card (i.e with a modem) */
310 void __iomem
*dingo_ccr
; /* only used for CEM56 cards */
311 unsigned last_ptr_value
; /* last packets transmitted value */
312 const char *manf_str
;
313 struct work_struct tx_timeout_task
;
317 * Some more prototypes
319 static netdev_tx_t
do_start_xmit(struct sk_buff
*skb
,
320 struct net_device
*dev
);
321 static void xirc_tx_timeout(struct net_device
*dev
);
322 static void xirc2ps_tx_timeout_task(struct work_struct
*work
);
323 static void set_addresses(struct net_device
*dev
);
324 static void set_multicast_list(struct net_device
*dev
);
325 static int set_card_type(struct pcmcia_device
*link
);
326 static int do_config(struct net_device
*dev
, struct ifmap
*map
);
327 static int do_open(struct net_device
*dev
);
328 static int do_ioctl(struct net_device
*dev
, struct ifreq
*rq
, int cmd
);
329 static const struct ethtool_ops netdev_ethtool_ops
;
330 static void hardreset(struct net_device
*dev
);
331 static void do_reset(struct net_device
*dev
, int full
);
332 static int init_mii(struct net_device
*dev
);
333 static void do_powerdown(struct net_device
*dev
);
334 static int do_stop(struct net_device
*dev
);
336 /*=============== Helper functions =========================*/
337 #define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR)
338 #define GetByte(reg) ((unsigned)inb(ioaddr + (reg)))
339 #define GetWord(reg) ((unsigned)inw(ioaddr + (reg)))
340 #define PutByte(reg,value) outb((value), ioaddr+(reg))
341 #define PutWord(reg,value) outw((value), ioaddr+(reg))
343 /*====== Functions used for debugging =================================*/
344 #if 0 /* reading regs may change system status */
346 PrintRegisters(struct net_device
*dev
)
348 unsigned int ioaddr
= dev
->base_addr
;
353 printk(KDBG_XIRC
"Register common: ");
354 for (i
= 0; i
< 8; i
++)
355 printk(" %2.2x", GetByte(i
));
357 for (page
= 0; page
<= 8; page
++) {
358 printk(KDBG_XIRC
"Register page %2x: ", page
);
360 for (i
= 8; i
< 16; i
++)
361 printk(" %2.2x", GetByte(i
));
364 for (page
=0x40 ; page
<= 0x5f; page
++) {
365 if (page
== 0x43 || (page
>= 0x46 && page
<= 0x4f) ||
366 (page
>= 0x51 && page
<=0x5e))
368 printk(KDBG_XIRC
"Register page %2x: ", page
);
370 for (i
= 8; i
< 16; i
++)
371 printk(" %2.2x", GetByte(i
));
378 /*============== MII Management functions ===============*/
381 * Turn around for read
384 mii_idle(unsigned int ioaddr
)
386 PutByte(XIRCREG2_GPR2
, 0x04|0); /* drive MDCK low */
388 PutByte(XIRCREG2_GPR2
, 0x04|1); /* and drive MDCK high */
393 * Write a bit to MDI/O
396 mii_putbit(unsigned int ioaddr
, unsigned data
)
400 PutByte(XIRCREG2_GPR2
, 0x0c|2|0); /* set MDIO */
402 PutByte(XIRCREG2_GPR2
, 0x0c|2|1); /* and drive MDCK high */
405 PutByte(XIRCREG2_GPR2
, 0x0c|0|0); /* clear MDIO */
407 PutByte(XIRCREG2_GPR2
, 0x0c|0|1); /* and drive MDCK high */
412 PutWord(XIRCREG2_GPR2
-1, 0x0e0e);
414 PutWord(XIRCREG2_GPR2
-1, 0x0f0f);
417 PutWord(XIRCREG2_GPR2
-1, 0x0c0c);
419 PutWord(XIRCREG2_GPR2
-1, 0x0d0d);
426 * Get a bit from MDI/O
429 mii_getbit(unsigned int ioaddr
)
433 PutByte(XIRCREG2_GPR2
, 4|0); /* drive MDCK low */
435 d
= GetByte(XIRCREG2_GPR2
); /* read MDIO */
436 PutByte(XIRCREG2_GPR2
, 4|1); /* drive MDCK high again */
438 return d
& 0x20; /* read MDIO */
442 mii_wbits(unsigned int ioaddr
, unsigned data
, int len
)
444 unsigned m
= 1 << (len
-1);
446 mii_putbit(ioaddr
, data
& m
);
450 mii_rd(unsigned int ioaddr
, u_char phyaddr
, u_char phyreg
)
456 for (i
=0; i
< 32; i
++) /* 32 bit preamble */
457 mii_putbit(ioaddr
, 1);
458 mii_wbits(ioaddr
, 0x06, 4); /* Start and opcode for read */
459 mii_wbits(ioaddr
, phyaddr
, 5); /* PHY address to be accessed */
460 mii_wbits(ioaddr
, phyreg
, 5); /* PHY register to read */
461 mii_idle(ioaddr
); /* turn around */
464 for (m
= 1<<15; m
; m
>>= 1)
465 if (mii_getbit(ioaddr
))
472 mii_wr(unsigned int ioaddr
, u_char phyaddr
, u_char phyreg
, unsigned data
,
478 for (i
=0; i
< 32; i
++) /* 32 bit preamble */
479 mii_putbit(ioaddr
, 1);
480 mii_wbits(ioaddr
, 0x05, 4); /* Start and opcode for write */
481 mii_wbits(ioaddr
, phyaddr
, 5); /* PHY address to be accessed */
482 mii_wbits(ioaddr
, phyreg
, 5); /* PHY Register to write */
483 mii_putbit(ioaddr
, 1); /* turn around */
484 mii_putbit(ioaddr
, 0);
485 mii_wbits(ioaddr
, data
, len
); /* And write the data */
489 /*============= Main bulk of functions =========================*/
491 static const struct net_device_ops netdev_ops
= {
494 .ndo_start_xmit
= do_start_xmit
,
495 .ndo_tx_timeout
= xirc_tx_timeout
,
496 .ndo_set_config
= do_config
,
497 .ndo_do_ioctl
= do_ioctl
,
498 .ndo_set_multicast_list
= set_multicast_list
,
499 .ndo_change_mtu
= eth_change_mtu
,
500 .ndo_set_mac_address
= eth_mac_addr
,
501 .ndo_validate_addr
= eth_validate_addr
,
505 * xirc2ps_attach() creates an "instance" of the driver, allocating
506 * local data structures for one device. The device is registered
507 * with Card Services.
509 * The dev_link structure is initialized, but we don't actually
510 * configure the card at this point -- we wait until we receive a
511 * card insertion event.
515 xirc2ps_probe(struct pcmcia_device
*link
)
517 struct net_device
*dev
;
520 dev_dbg(&link
->dev
, "attach()\n");
522 /* Allocate the device structure */
523 dev
= alloc_etherdev(sizeof(local_info_t
));
526 local
= netdev_priv(dev
);
531 /* General socket configuration */
532 link
->conf
.Attributes
= CONF_ENABLE_IRQ
;
533 link
->conf
.IntType
= INT_MEMORY_AND_IO
;
534 link
->conf
.ConfigIndex
= 1;
536 /* Fill in card specific entries */
537 dev
->netdev_ops
= &netdev_ops
;
538 dev
->ethtool_ops
= &netdev_ethtool_ops
;
539 dev
->watchdog_timeo
= TX_TIMEOUT
;
540 INIT_WORK(&local
->tx_timeout_task
, xirc2ps_tx_timeout_task
);
542 return xirc2ps_config(link
);
543 } /* xirc2ps_attach */
546 * This deletes a driver "instance". The device is de-registered
547 * with Card Services. If it has been released, all local data
548 * structures are freed. Otherwise, the structures will be freed
549 * when the device is released.
553 xirc2ps_detach(struct pcmcia_device
*link
)
555 struct net_device
*dev
= link
->priv
;
557 dev_dbg(&link
->dev
, "detach\n");
559 unregister_netdev(dev
);
561 xirc2ps_release(link
);
564 } /* xirc2ps_detach */
567 * Detect the type of the card. s is the buffer with the data of tuple 0x20
568 * Returns: 0 := not supported
569 * mediaid=11 and prodid=47
585 set_card_type(struct pcmcia_device
*link
)
587 struct net_device
*dev
= link
->priv
;
588 local_info_t
*local
= netdev_priv(dev
);
590 unsigned int cisrev
, mediaid
, prodid
;
593 len
= pcmcia_get_tuple(link
, CISTPL_MANFID
, &buf
);
595 dev_err(&link
->dev
, "invalid CIS -- sorry\n");
603 dev_dbg(&link
->dev
, "cisrev=%02x mediaid=%02x prodid=%02x\n",
604 cisrev
, mediaid
, prodid
);
609 local
->card_type
= XIR_UNKNOWN
;
610 if (!(prodid
& 0x40)) {
611 printk(KNOT_XIRC
"Ooops: Not a creditcard\n");
614 if (!(mediaid
& 0x01)) {
615 printk(KNOT_XIRC
"Not an Ethernet card\n");
618 if (mediaid
& 0x10) {
620 switch(prodid
& 15) {
621 case 1: local
->card_type
= XIR_CEM
; break;
622 case 2: local
->card_type
= XIR_CEM2
; break;
623 case 3: local
->card_type
= XIR_CEM3
; break;
624 case 4: local
->card_type
= XIR_CEM33
; break;
625 case 5: local
->card_type
= XIR_CEM56M
;
629 case 7: /* 7 is the RealPort 10/56 */
630 local
->card_type
= XIR_CEM56
;
636 switch(prodid
& 15) {
637 case 1: local
->card_type
= has_ce2_string(link
)? XIR_CE2
: XIR_CE
;
639 case 2: local
->card_type
= XIR_CE2
; break;
640 case 3: local
->card_type
= XIR_CE3
;
645 if (local
->card_type
== XIR_CE
|| local
->card_type
== XIR_CEM
) {
646 printk(KNOT_XIRC
"Sorry, this is an old CE card\n");
649 if (local
->card_type
== XIR_UNKNOWN
)
650 printk(KNOT_XIRC
"unknown card (mediaid=%02x prodid=%02x)\n",
657 * There are some CE2 cards out which claim to be a CE card.
658 * This function looks for a "CE2" in the 3rd version field.
659 * Returns: true if this is a CE2
662 has_ce2_string(struct pcmcia_device
* p_dev
)
664 if (p_dev
->prod_id
[2] && strstr(p_dev
->prod_id
[2], "CE2"))
670 xirc2ps_config_modem(struct pcmcia_device
*p_dev
,
671 cistpl_cftable_entry_t
*cf
,
672 cistpl_cftable_entry_t
*dflt
,
678 if (cf
->io
.nwin
> 0 && (cf
->io
.win
[0].base
& 0xf) == 8) {
679 for (ioaddr
= 0x300; ioaddr
< 0x400; ioaddr
+= 0x10) {
680 p_dev
->resource
[1]->start
= cf
->io
.win
[0].base
;
681 p_dev
->resource
[0]->start
= ioaddr
;
682 if (!pcmcia_request_io(p_dev
))
690 xirc2ps_config_check(struct pcmcia_device
*p_dev
,
691 cistpl_cftable_entry_t
*cf
,
692 cistpl_cftable_entry_t
*dflt
,
696 int *pass
= priv_data
;
698 if (cf
->io
.nwin
> 0 && (cf
->io
.win
[0].base
& 0xf) == 8) {
699 p_dev
->resource
[1]->start
= cf
->io
.win
[0].base
;
700 p_dev
->resource
[0]->start
= p_dev
->resource
[1]->start
701 + (*pass
? (cf
->index
& 0x20 ? -24:8)
702 : (cf
->index
& 0x20 ? 8:-24));
703 if (!pcmcia_request_io(p_dev
))
711 static int pcmcia_get_mac_ce(struct pcmcia_device
*p_dev
,
715 struct net_device
*dev
= priv
;
718 if (tuple
->TupleDataLen
!= 13)
720 if ((tuple
->TupleData
[0] != 2) || (tuple
->TupleData
[1] != 1) ||
721 (tuple
->TupleData
[2] != 6))
723 /* another try (James Lehmer's CE2 version 4.1)*/
724 for (i
= 2; i
< 6; i
++)
725 dev
->dev_addr
[i
] = tuple
->TupleData
[i
+2];
731 * xirc2ps_config() is scheduled to run after a CARD_INSERTION event
732 * is received, to configure the PCMCIA socket, and to make the
733 * ethernet device available to the system.
736 xirc2ps_config(struct pcmcia_device
* link
)
738 struct net_device
*dev
= link
->priv
;
739 local_info_t
*local
= netdev_priv(dev
);
745 local
->dingo_ccr
= NULL
;
747 dev_dbg(&link
->dev
, "config\n");
749 /* Is this a valid card */
750 if (link
->has_manf_id
== 0) {
751 printk(KNOT_XIRC
"manfid not found in CIS\n");
755 switch (link
->manf_id
) {
757 local
->manf_str
= "Xircom";
760 local
->manf_str
= "Accton";
764 local
->manf_str
= "Compaq";
767 local
->manf_str
= "Intel";
770 local
->manf_str
= "Toshiba";
773 printk(KNOT_XIRC
"Unknown Card Manufacturer ID: 0x%04x\n",
774 (unsigned)link
->manf_id
);
777 dev_dbg(&link
->dev
, "found %s card\n", local
->manf_str
);
779 if (!set_card_type(link
)) {
780 printk(KNOT_XIRC
"this card is not supported\n");
784 /* get the ethernet address from the CIS */
785 err
= pcmcia_get_mac_from_cis(link
, dev
);
787 /* not found: try to get the node-id from tuple 0x89 */
789 len
= pcmcia_get_tuple(link
, 0x89, &buf
);
790 /* data layout looks like tuple 0x22 */
791 if (buf
&& len
== 8) {
792 if (*buf
== CISTPL_FUNCE_LAN_NODE_ID
) {
794 for (i
= 2; i
< 6; i
++)
795 dev
->dev_addr
[i
] = buf
[i
+2];
803 err
= pcmcia_loop_tuple(link
, CISTPL_FUNCE
, pcmcia_get_mac_ce
, dev
);
806 printk(KNOT_XIRC
"node-id not found in CIS\n");
810 link
->resource
[0]->flags
|= IO_DATA_PATH_WIDTH_16
;
815 link
->conf
.Attributes
|= CONF_ENABLE_SPKR
;
816 link
->conf
.Status
|= CCSR_AUDIO_ENA
;
818 link
->resource
[1]->end
= 8;
819 link
->resource
[1]->flags
|= IO_DATA_PATH_WIDTH_8
;
821 /* Take the Modem IO port from the CIS and scan for a free
823 link
->resource
[0]->end
= 16; /* no Mako stuff anymore */
824 if (!pcmcia_loop_config(link
, xirc2ps_config_modem
, NULL
))
827 link
->resource
[0]->end
= 18;
828 /* We do 2 passes here: The first one uses the regular mapping and
829 * the second tries again, thereby considering that the 32 ports are
830 * mirrored every 32 bytes. Actually we use a mirrored port for
831 * the Mako if (on the first pass) the COR bit 5 is set.
833 for (pass
=0; pass
< 2; pass
++)
834 if (!pcmcia_loop_config(link
, xirc2ps_config_check
, &pass
))
836 /* if special option:
837 * try to configure as Ethernet only.
840 printk(KNOT_XIRC
"no ports available\n");
843 link
->resource
[0]->end
= 16;
844 for (ioaddr
= 0x300; ioaddr
< 0x400; ioaddr
+= 0x10) {
845 link
->resource
[0]->start
= ioaddr
;
846 if (!(err
= pcmcia_request_io(link
)))
849 link
->resource
[0]->start
= 0; /* let CS decide */
850 if ((err
= pcmcia_request_io(link
)))
858 * Now allocate an interrupt line. Note that this does not
859 * actually assign a handler to the interrupt.
861 if ((err
=pcmcia_request_irq(link
, xirc2ps_interrupt
)))
865 * This actually configures the PCMCIA socket -- setting up
866 * the I/O windows and the interrupt mapping.
868 if ((err
=pcmcia_request_configuration(link
, &link
->conf
)))
875 /* Reset the modem's BAR to the correct value
876 * This is necessary because in the RequestConfiguration call,
877 * the base address of the ethernet port (BasePort1) is written
878 * to the BAR registers of the modem.
880 err
= pcmcia_write_config_byte(link
, CISREG_IOBASE_0
, (u8
)
881 link
->resource
[1]->start
& 0xff);
885 err
= pcmcia_write_config_byte(link
, CISREG_IOBASE_1
,
886 (link
->resource
[1]->start
>> 8) & 0xff);
890 /* There is no config entry for the Ethernet part which
891 * is at 0x0800. So we allocate a window into the attribute
892 * memory and write direct to the CIS registers
894 req
.Attributes
= WIN_DATA_WIDTH_8
|WIN_MEMORY_TYPE_AM
|WIN_ENABLE
;
895 req
.Base
= req
.Size
= 0;
897 if ((err
= pcmcia_request_window(link
, &req
, &link
->win
)))
900 local
->dingo_ccr
= ioremap(req
.Base
,0x1000) + 0x0800;
901 mem
.CardOffset
= 0x0;
903 if ((err
= pcmcia_map_mem_page(link
, link
->win
, &mem
)))
906 /* Setup the CCRs; there are no infos in the CIS about the Ethernet
909 writeb(0x47, local
->dingo_ccr
+ CISREG_COR
);
910 ioaddr
= link
->resource
[0]->start
;
911 writeb(ioaddr
& 0xff , local
->dingo_ccr
+ CISREG_IOBASE_0
);
912 writeb((ioaddr
>> 8)&0xff , local
->dingo_ccr
+ CISREG_IOBASE_1
);
917 printk(KERN_INFO
"ECOR:");
918 for (i
=0; i
< 7; i
++) {
919 tmp
= readb(local
->dingo_ccr
+ i
*2);
920 printk(" %02x", tmp
);
923 printk(KERN_INFO
"DCOR:");
924 for (i
=0; i
< 4; i
++) {
925 tmp
= readb(local
->dingo_ccr
+ 0x20 + i
*2);
926 printk(" %02x", tmp
);
929 printk(KERN_INFO
"SCOR:");
930 for (i
=0; i
< 10; i
++) {
931 tmp
= readb(local
->dingo_ccr
+ 0x40 + i
*2);
932 printk(" %02x", tmp
);
938 writeb(0x01, local
->dingo_ccr
+ 0x20);
939 writeb(0x0c, local
->dingo_ccr
+ 0x22);
940 writeb(0x00, local
->dingo_ccr
+ 0x24);
941 writeb(0x00, local
->dingo_ccr
+ 0x26);
942 writeb(0x00, local
->dingo_ccr
+ 0x28);
945 /* The if_port symbol can be set when the module is loaded */
948 local
->probe_port
= dev
->if_port
= 1;
949 } else if ((if_port
>= 1 && if_port
<= 2) ||
950 (local
->mohawk
&& if_port
==4))
951 dev
->if_port
= if_port
;
953 printk(KNOT_XIRC
"invalid if_port requested\n");
955 /* we can now register the device with the net subsystem */
956 dev
->irq
= link
->irq
;
957 dev
->base_addr
= link
->resource
[0]->start
;
960 do_reset(dev
, 1); /* a kludge to make the cem56 work */
962 SET_NETDEV_DEV(dev
, &link
->dev
);
964 if ((err
=register_netdev(dev
))) {
965 printk(KNOT_XIRC
"register_netdev() failed\n");
969 /* give some infos about the hardware */
970 printk(KERN_INFO
"%s: %s: port %#3lx, irq %d, hwaddr %pM\n",
971 dev
->name
, local
->manf_str
,(u_long
)dev
->base_addr
, (int)dev
->irq
,
977 xirc2ps_release(link
);
982 } /* xirc2ps_config */
985 * After a card is removed, xirc2ps_release() will unregister the net
986 * device, and release the PCMCIA configuration. If the device is
987 * still open, this will be postponed until it is closed.
990 xirc2ps_release(struct pcmcia_device
*link
)
992 dev_dbg(&link
->dev
, "release\n");
995 struct net_device
*dev
= link
->priv
;
996 local_info_t
*local
= netdev_priv(dev
);
998 iounmap(local
->dingo_ccr
- 0x0800);
1000 pcmcia_disable_device(link
);
1001 } /* xirc2ps_release */
1003 /*====================================================================*/
1006 static int xirc2ps_suspend(struct pcmcia_device
*link
)
1008 struct net_device
*dev
= link
->priv
;
1011 netif_device_detach(dev
);
1018 static int xirc2ps_resume(struct pcmcia_device
*link
)
1020 struct net_device
*dev
= link
->priv
;
1024 netif_device_attach(dev
);
1031 /*====================================================================*/
1034 * This is the Interrupt service route.
1037 xirc2ps_interrupt(int irq
, void *dev_id
)
1039 struct net_device
*dev
= (struct net_device
*)dev_id
;
1040 local_info_t
*lp
= netdev_priv(dev
);
1041 unsigned int ioaddr
;
1043 unsigned bytes_rcvd
;
1044 unsigned int_status
, eth_status
, rx_status
, tx_status
;
1045 unsigned rsr
, pktlen
;
1046 ulong start_ticks
= jiffies
; /* fixme: jiffies rollover every 497 days
1047 * is this something to worry about?
1051 if (!netif_device_present(dev
))
1054 ioaddr
= dev
->base_addr
;
1055 if (lp
->mohawk
) { /* must disable the interrupt */
1056 PutByte(XIRCREG_CR
, 0);
1059 pr_debug("%s: interrupt %d at %#x.\n", dev
->name
, irq
, ioaddr
);
1061 saved_page
= GetByte(XIRCREG_PR
);
1062 /* Read the ISR to see whats the cause for the interrupt.
1063 * This also clears the interrupt flags on CE2 cards
1065 int_status
= GetByte(XIRCREG_ISR
);
1068 if (int_status
== 0xff) { /* card may be ejected */
1069 pr_debug("%s: interrupt %d for dead card\n", dev
->name
, irq
);
1072 eth_status
= GetByte(XIRCREG_ESR
);
1075 rx_status
= GetByte(XIRCREG40_RXST0
);
1076 PutByte(XIRCREG40_RXST0
, (~rx_status
& 0xff));
1077 tx_status
= GetByte(XIRCREG40_TXST0
);
1078 tx_status
|= GetByte(XIRCREG40_TXST1
) << 8;
1079 PutByte(XIRCREG40_TXST0
, 0);
1080 PutByte(XIRCREG40_TXST1
, 0);
1082 pr_debug("%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
1083 dev
->name
, int_status
, eth_status
, rx_status
, tx_status
);
1085 /***** receive section ******/
1087 while (eth_status
& FullPktRcvd
) {
1088 rsr
= GetByte(XIRCREG0_RSR
);
1089 if (bytes_rcvd
> maxrx_bytes
&& (rsr
& PktRxOk
)) {
1090 /* too many bytes received during this int, drop the rest of the
1092 dev
->stats
.rx_dropped
++;
1093 pr_debug("%s: RX drop, too much done\n", dev
->name
);
1094 } else if (rsr
& PktRxOk
) {
1095 struct sk_buff
*skb
;
1097 pktlen
= GetWord(XIRCREG0_RBC
);
1098 bytes_rcvd
+= pktlen
;
1100 pr_debug("rsr=%#02x packet_length=%u\n", rsr
, pktlen
);
1102 skb
= dev_alloc_skb(pktlen
+3); /* 1 extra so we can use insw */
1104 printk(KNOT_XIRC
"low memory, packet dropped (size=%u)\n",
1106 dev
->stats
.rx_dropped
++;
1107 } else { /* okay get the packet */
1108 skb_reserve(skb
, 2);
1109 if (lp
->silicon
== 0 ) { /* work around a hardware bug */
1110 unsigned rhsa
; /* receive start address */
1113 rhsa
= GetWord(XIRCREG5_RHSA0
);
1115 rhsa
+= 3; /* skip control infos */
1118 if (rhsa
+ pktlen
> 0x8000) {
1120 u_char
*buf
= skb_put(skb
, pktlen
);
1121 for (i
=0; i
< pktlen
; i
++, rhsa
++) {
1122 buf
[i
] = GetByte(XIRCREG_EDP
);
1123 if (rhsa
== 0x8000) {
1129 insw(ioaddr
+XIRCREG_EDP
,
1130 skb_put(skb
, pktlen
), (pktlen
+1)>>1);
1134 else if (lp
->mohawk
) {
1135 /* To use this 32 bit access we should use
1136 * a manual optimized loop
1137 * Also the words are swapped, we can get more
1138 * performance by using 32 bit access and swapping
1139 * the words in a register. Will need this for cardbus
1141 * Note: don't forget to change the ALLOC_SKB to .. +3
1144 u_long
*p
= skb_put(skb
, pktlen
);
1146 unsigned int edpreg
= ioaddr
+XIRCREG_EDP
-2;
1147 for (i
=0; i
< len
; i
+= 4, p
++) {
1149 __asm__("rorl $16,%0\n\t"
1157 insw(ioaddr
+XIRCREG_EDP
, skb_put(skb
, pktlen
),
1160 skb
->protocol
= eth_type_trans(skb
, dev
);
1162 dev
->stats
.rx_packets
++;
1163 dev
->stats
.rx_bytes
+= pktlen
;
1164 if (!(rsr
& PhyPkt
))
1165 dev
->stats
.multicast
++;
1167 } else { /* bad packet */
1168 pr_debug("rsr=%#02x\n", rsr
);
1170 if (rsr
& PktTooLong
) {
1171 dev
->stats
.rx_frame_errors
++;
1172 pr_debug("%s: Packet too long\n", dev
->name
);
1175 dev
->stats
.rx_crc_errors
++;
1176 pr_debug("%s: CRC error\n", dev
->name
);
1178 if (rsr
& AlignErr
) {
1179 dev
->stats
.rx_fifo_errors
++; /* okay ? */
1180 pr_debug("%s: Alignment error\n", dev
->name
);
1183 /* clear the received/dropped/error packet */
1184 PutWord(XIRCREG0_DO
, 0x8000); /* issue cmd: skip_rx_packet */
1186 /* get the new ethernet status */
1187 eth_status
= GetByte(XIRCREG_ESR
);
1189 if (rx_status
& 0x10) { /* Receive overrun */
1190 dev
->stats
.rx_over_errors
++;
1191 PutByte(XIRCREG_CR
, ClearRxOvrun
);
1192 pr_debug("receive overrun cleared\n");
1195 /***** transmit section ******/
1196 if (int_status
& PktTxed
) {
1199 n
= lp
->last_ptr_value
;
1200 nn
= GetByte(XIRCREG0_PTR
);
1201 lp
->last_ptr_value
= nn
;
1202 if (nn
< n
) /* rollover */
1203 dev
->stats
.tx_packets
+= 256 - n
;
1204 else if (n
== nn
) { /* happens sometimes - don't know why */
1205 pr_debug("PTR not changed?\n");
1207 dev
->stats
.tx_packets
+= lp
->last_ptr_value
- n
;
1208 netif_wake_queue(dev
);
1210 if (tx_status
& 0x0002) { /* Execessive collissions */
1211 pr_debug("tx restarted due to execssive collissions\n");
1212 PutByte(XIRCREG_CR
, RestartTx
); /* restart transmitter process */
1214 if (tx_status
& 0x0040)
1215 dev
->stats
.tx_aborted_errors
++;
1217 /* recalculate our work chunk so that we limit the duration of this
1218 * ISR to about 1/10 of a second.
1219 * Calculate only if we received a reasonable amount of bytes.
1221 if (bytes_rcvd
> 1000) {
1222 u_long duration
= jiffies
- start_ticks
;
1224 if (duration
>= HZ
/10) { /* if more than about 1/10 second */
1225 maxrx_bytes
= (bytes_rcvd
* (HZ
/10)) / duration
;
1226 if (maxrx_bytes
< 2000)
1228 else if (maxrx_bytes
> 22000)
1229 maxrx_bytes
= 22000;
1230 pr_debug("set maxrx=%u (rcvd=%u ticks=%lu)\n",
1231 maxrx_bytes
, bytes_rcvd
, duration
);
1232 } else if (!duration
&& maxrx_bytes
< 22000) {
1233 /* now much faster */
1234 maxrx_bytes
+= 2000;
1235 if (maxrx_bytes
> 22000)
1236 maxrx_bytes
= 22000;
1237 pr_debug("set maxrx=%u\n", maxrx_bytes
);
1243 if (int_status
!= 0xff && (int_status
= GetByte(XIRCREG_ISR
)) != 0)
1246 SelectPage(saved_page
);
1247 PutByte(XIRCREG_CR
, EnableIntr
); /* re-enable interrupts */
1248 /* Instead of dropping packets during a receive, we could
1249 * force an interrupt with this command:
1250 * PutByte(XIRCREG_CR, EnableIntr|ForceIntr);
1253 } /* xirc2ps_interrupt */
1255 /*====================================================================*/
1258 xirc2ps_tx_timeout_task(struct work_struct
*work
)
1260 local_info_t
*local
=
1261 container_of(work
, local_info_t
, tx_timeout_task
);
1262 struct net_device
*dev
= local
->dev
;
1263 /* reset the card */
1265 dev
->trans_start
= jiffies
; /* prevent tx timeout */
1266 netif_wake_queue(dev
);
1270 xirc_tx_timeout(struct net_device
*dev
)
1272 local_info_t
*lp
= netdev_priv(dev
);
1273 dev
->stats
.tx_errors
++;
1274 printk(KERN_NOTICE
"%s: transmit timed out\n", dev
->name
);
1275 schedule_work(&lp
->tx_timeout_task
);
1279 do_start_xmit(struct sk_buff
*skb
, struct net_device
*dev
)
1281 local_info_t
*lp
= netdev_priv(dev
);
1282 unsigned int ioaddr
= dev
->base_addr
;
1285 unsigned pktlen
= skb
->len
;
1287 pr_debug("do_start_xmit(skb=%p, dev=%p) len=%u\n",
1291 /* adjust the packet length to min. required
1292 * and hope that the buffer is large enough
1293 * to provide some random data.
1294 * fixme: For Mohawk we can change this by sending
1295 * a larger packetlen than we actually have; the chip will
1296 * pad this in his buffer with random bytes
1298 if (pktlen
< ETH_ZLEN
)
1300 if (skb_padto(skb
, ETH_ZLEN
))
1301 return NETDEV_TX_OK
;
1305 netif_stop_queue(dev
);
1307 PutWord(XIRCREG0_TRS
, (u_short
)pktlen
+2);
1308 freespace
= GetWord(XIRCREG0_TSO
);
1309 okay
= freespace
& 0x8000;
1310 freespace
&= 0x7fff;
1311 /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */
1312 okay
= pktlen
+2 < freespace
;
1313 pr_debug("%s: avail. tx space=%u%s\n",
1314 dev
->name
, freespace
, okay
? " (okay)":" (not enough)");
1315 if (!okay
) { /* not enough space */
1316 return NETDEV_TX_BUSY
; /* upper layer may decide to requeue this packet */
1318 /* send the packet */
1319 PutWord(XIRCREG_EDP
, (u_short
)pktlen
);
1320 outsw(ioaddr
+XIRCREG_EDP
, skb
->data
, pktlen
>>1);
1322 PutByte(XIRCREG_EDP
, skb
->data
[pktlen
-1]);
1325 PutByte(XIRCREG_CR
, TransmitPacket
|EnableIntr
);
1327 dev_kfree_skb (skb
);
1328 dev
->stats
.tx_bytes
+= pktlen
;
1329 netif_start_queue(dev
);
1330 return NETDEV_TX_OK
;
1333 struct set_address_info
{
1337 unsigned int ioaddr
;
1340 static void set_address(struct set_address_info
*sa_info
, char *addr
)
1342 unsigned int ioaddr
= sa_info
->ioaddr
;
1345 for (i
= 0; i
< 6; i
++) {
1346 if (sa_info
->reg_nr
> 15) {
1347 sa_info
->reg_nr
= 8;
1349 SelectPage(sa_info
->page_nr
);
1351 if (sa_info
->mohawk
)
1352 PutByte(sa_info
->reg_nr
++, addr
[5 - i
]);
1354 PutByte(sa_info
->reg_nr
++, addr
[i
]);
1359 * Set all addresses: This first one is the individual address,
1360 * the next 9 addresses are taken from the multicast list and
1361 * the rest is filled with the individual address.
1363 static void set_addresses(struct net_device
*dev
)
1365 unsigned int ioaddr
= dev
->base_addr
;
1366 local_info_t
*lp
= netdev_priv(dev
);
1367 struct netdev_hw_addr
*ha
;
1368 struct set_address_info sa_info
;
1372 * Setup the info structure so that by first set_address call it will do
1373 * SelectPage with the right page number. Hence these ones here.
1375 sa_info
.reg_nr
= 15 + 1;
1376 sa_info
.page_nr
= 0x50 - 1;
1377 sa_info
.mohawk
= lp
->mohawk
;
1378 sa_info
.ioaddr
= ioaddr
;
1380 set_address(&sa_info
, dev
->dev_addr
);
1382 netdev_for_each_mc_addr(ha
, dev
) {
1385 set_address(&sa_info
, ha
->addr
);
1388 set_address(&sa_info
, dev
->dev_addr
);
1393 * Set or clear the multicast filter for this adaptor.
1394 * We can filter up to 9 addresses, if more are requested we set
1395 * multicast promiscuous mode.
1399 set_multicast_list(struct net_device
*dev
)
1401 unsigned int ioaddr
= dev
->base_addr
;
1405 value
= GetByte(XIRCREG42_SWC1
) & 0xC0;
1407 if (dev
->flags
& IFF_PROMISC
) { /* snoop */
1408 PutByte(XIRCREG42_SWC1
, value
| 0x06); /* set MPE and PME */
1409 } else if (netdev_mc_count(dev
) > 9 || (dev
->flags
& IFF_ALLMULTI
)) {
1410 PutByte(XIRCREG42_SWC1
, value
| 0x02); /* set MPE */
1411 } else if (!netdev_mc_empty(dev
)) {
1412 /* the chip can filter 9 addresses perfectly */
1413 PutByte(XIRCREG42_SWC1
, value
| 0x01);
1415 PutByte(XIRCREG40_CMD0
, Offline
);
1418 PutByte(XIRCREG40_CMD0
, EnableRecv
| Online
);
1419 } else { /* standard usage */
1420 PutByte(XIRCREG42_SWC1
, value
| 0x00);
1426 do_config(struct net_device
*dev
, struct ifmap
*map
)
1428 local_info_t
*local
= netdev_priv(dev
);
1430 pr_debug("do_config(%p)\n", dev
);
1431 if (map
->port
!= 255 && map
->port
!= dev
->if_port
) {
1435 local
->probe_port
= 1;
1438 local
->probe_port
= 0;
1439 dev
->if_port
= map
->port
;
1441 printk(KERN_INFO
"%s: switching to %s port\n",
1442 dev
->name
, if_names
[dev
->if_port
]);
1443 do_reset(dev
,1); /* not the fine way :-) */
1452 do_open(struct net_device
*dev
)
1454 local_info_t
*lp
= netdev_priv(dev
);
1455 struct pcmcia_device
*link
= lp
->p_dev
;
1457 dev_dbg(&link
->dev
, "do_open(%p)\n", dev
);
1459 /* Check that the PCMCIA card is still here. */
1460 /* Physical device present signature. */
1461 if (!pcmcia_dev_present(link
))
1467 netif_start_queue(dev
);
1473 static void netdev_get_drvinfo(struct net_device
*dev
,
1474 struct ethtool_drvinfo
*info
)
1476 strcpy(info
->driver
, "xirc2ps_cs");
1477 sprintf(info
->bus_info
, "PCMCIA 0x%lx", dev
->base_addr
);
1480 static const struct ethtool_ops netdev_ethtool_ops
= {
1481 .get_drvinfo
= netdev_get_drvinfo
,
1485 do_ioctl(struct net_device
*dev
, struct ifreq
*rq
, int cmd
)
1487 local_info_t
*local
= netdev_priv(dev
);
1488 unsigned int ioaddr
= dev
->base_addr
;
1489 struct mii_ioctl_data
*data
= if_mii(rq
);
1491 pr_debug("%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
1492 dev
->name
, rq
->ifr_ifrn
.ifrn_name
, cmd
,
1493 data
->phy_id
, data
->reg_num
, data
->val_in
, data
->val_out
);
1499 case SIOCGMIIPHY
: /* Get the address of the PHY in use. */
1500 data
->phy_id
= 0; /* we have only this address */
1502 case SIOCGMIIREG
: /* Read the specified MII register. */
1503 data
->val_out
= mii_rd(ioaddr
, data
->phy_id
& 0x1f,
1504 data
->reg_num
& 0x1f);
1506 case SIOCSMIIREG
: /* Write the specified MII register */
1507 mii_wr(ioaddr
, data
->phy_id
& 0x1f, data
->reg_num
& 0x1f, data
->val_in
,
1517 hardreset(struct net_device
*dev
)
1519 local_info_t
*local
= netdev_priv(dev
);
1520 unsigned int ioaddr
= dev
->base_addr
;
1524 PutByte(XIRCREG4_GPR1
, 0); /* clear bit 0: power down */
1525 msleep(40); /* wait 40 msec */
1527 PutByte(XIRCREG4_GPR1
, 1); /* set bit 0: power up */
1529 PutByte(XIRCREG4_GPR1
, 1 | 4); /* set bit 0: power up, bit 2: AIC */
1530 msleep(20); /* wait 20 msec */
1534 do_reset(struct net_device
*dev
, int full
)
1536 local_info_t
*local
= netdev_priv(dev
);
1537 unsigned int ioaddr
= dev
->base_addr
;
1540 pr_debug("%s: do_reset(%p,%d)\n", dev
? dev
->name
:"eth?", dev
, full
);
1543 PutByte(XIRCREG_CR
, SoftReset
); /* set */
1544 msleep(20); /* wait 20 msec */
1545 PutByte(XIRCREG_CR
, 0); /* clear */
1546 msleep(40); /* wait 40 msec */
1547 if (local
->mohawk
) {
1549 /* set pin GP1 and GP2 to output (0x0c)
1550 * set GP1 to low to power up the ML6692 (0x00)
1551 * set GP2 to high to power up the 10Mhz chip (0x02)
1553 PutByte(XIRCREG4_GPR0
, 0x0e);
1556 /* give the circuits some time to power up */
1557 msleep(500); /* about 500ms */
1559 local
->last_ptr_value
= 0;
1560 local
->silicon
= local
->mohawk
? (GetByte(XIRCREG4_BOV
) & 0x70) >> 4
1561 : (GetByte(XIRCREG4_BOV
) & 0x30) >> 4;
1563 if (local
->probe_port
) {
1564 if (!local
->mohawk
) {
1566 PutByte(XIRCREG4_GPR0
, 4);
1567 local
->probe_port
= 0;
1569 } else if (dev
->if_port
== 2) { /* enable 10Base2 */
1571 PutByte(XIRCREG42_SWC1
, 0xC0);
1572 } else { /* enable 10BaseT */
1574 PutByte(XIRCREG42_SWC1
, 0x80);
1576 msleep(40); /* wait 40 msec to let it complete */
1581 value
= GetByte(XIRCREG_ESR
); /* read the ESR */
1582 printk(KERN_DEBUG
"%s: ESR is: %#02x\n", dev
->name
, value
);
1588 PutByte(XIRCREG1_IMR0
, 0xff); /* allow all ints */
1589 PutByte(XIRCREG1_IMR1
, 1 ); /* and Set TxUnderrunDetect */
1590 value
= GetByte(XIRCREG1_ECR
);
1593 value
|= DisableLinkPulse
;
1594 PutByte(XIRCREG1_ECR
, value
);
1596 pr_debug("%s: ECR is: %#02x\n", dev
->name
, value
);
1599 PutByte(XIRCREG42_SWC0
, 0x20); /* disable source insertion */
1601 if (local
->silicon
!= 1) {
1602 /* set the local memory dividing line.
1603 * The comments in the sample code say that this is only
1604 * settable with the scipper version 2 which is revision 0.
1605 * Always for CE3 cards
1608 PutWord(XIRCREG2_RBS
, 0x2000);
1614 /* Hardware workaround:
1615 * The receive byte pointer after reset is off by 1 so we need
1616 * to move the offset pointer back to 0.
1619 PutWord(XIRCREG0_DO
, 0x2000); /* change offset command, off=0 */
1621 /* setup MAC IMRs and clear status registers */
1622 SelectPage(0x40); /* Bit 7 ... bit 0 */
1623 PutByte(XIRCREG40_RMASK0
, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */
1624 PutByte(XIRCREG40_TMASK0
, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1625 PutByte(XIRCREG40_TMASK1
, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/
1626 PutByte(XIRCREG40_RXST0
, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */
1627 PutByte(XIRCREG40_TXST0
, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
1628 PutByte(XIRCREG40_TXST1
, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */
1630 if (full
&& local
->mohawk
&& init_mii(dev
)) {
1631 if (dev
->if_port
== 4 || local
->dingo
|| local
->new_mii
) {
1632 printk(KERN_INFO
"%s: MII selected\n", dev
->name
);
1634 PutByte(XIRCREG2_MSR
, GetByte(XIRCREG2_MSR
) | 0x08);
1637 printk(KERN_INFO
"%s: MII detected; using 10mbs\n",
1640 if (dev
->if_port
== 2) /* enable 10Base2 */
1641 PutByte(XIRCREG42_SWC1
, 0xC0);
1642 else /* enable 10BaseT */
1643 PutByte(XIRCREG42_SWC1
, 0x80);
1644 msleep(40); /* wait 40 msec to let it complete */
1647 PutByte(XIRCREG1_ECR
, GetByte(XIRCREG1_ECR
| FullDuplex
));
1648 } else { /* No MII */
1650 value
= GetByte(XIRCREG_ESR
); /* read the ESR */
1651 dev
->if_port
= (value
& MediaSelect
) ? 1 : 2;
1654 /* configure the LEDs */
1656 if (dev
->if_port
== 1 || dev
->if_port
== 4) /* TP: Link and Activity */
1657 PutByte(XIRCREG2_LED
, 0x3b);
1658 else /* Coax: Not-Collision and Activity */
1659 PutByte(XIRCREG2_LED
, 0x3a);
1662 PutByte(0x0b, 0x04); /* 100 Mbit LED */
1664 /* enable receiver and put the mac online */
1666 set_multicast_list(dev
);
1668 PutByte(XIRCREG40_CMD0
, EnableRecv
| Online
);
1671 /* setup Ethernet IMR and enable interrupts */
1673 PutByte(XIRCREG1_IMR0
, 0xff);
1676 PutByte(XIRCREG_CR
, EnableIntr
);
1677 if (local
->modem
&& !local
->dingo
) { /* do some magic */
1678 if (!(GetByte(0x10) & 0x01))
1679 PutByte(0x10, 0x11); /* unmask master-int bit */
1683 printk(KERN_INFO
"%s: media %s, silicon revision %d\n",
1684 dev
->name
, if_names
[dev
->if_port
], local
->silicon
);
1685 /* We should switch back to page 0 to avoid a bug in revision 0
1686 * where regs with offset below 8 can't be read after an access
1687 * to the MAC registers */
1692 * Initialize the Media-Independent-Interface
1693 * Returns: True if we have a good MII
1696 init_mii(struct net_device
*dev
)
1698 local_info_t
*local
= netdev_priv(dev
);
1699 unsigned int ioaddr
= dev
->base_addr
;
1700 unsigned control
, status
, linkpartner
;
1703 if (if_port
== 4 || if_port
== 1) { /* force 100BaseT or 10BaseT */
1704 dev
->if_port
= if_port
;
1705 local
->probe_port
= 0;
1709 status
= mii_rd(ioaddr
, 0, 1);
1710 if ((status
& 0xff00) != 0x7800)
1711 return 0; /* No MII */
1713 local
->new_mii
= (mii_rd(ioaddr
, 0, 2) != 0xffff);
1715 if (local
->probe_port
)
1716 control
= 0x1000; /* auto neg */
1717 else if (dev
->if_port
== 4)
1718 control
= 0x2000; /* no auto neg, 100mbs mode */
1720 control
= 0x0000; /* no auto neg, 10mbs mode */
1721 mii_wr(ioaddr
, 0, 0, control
, 16);
1723 control
= mii_rd(ioaddr
, 0, 0);
1725 if (control
& 0x0400) {
1726 printk(KERN_NOTICE
"%s can't take PHY out of isolation mode\n",
1728 local
->probe_port
= 0;
1732 if (local
->probe_port
) {
1733 /* according to the DP83840A specs the auto negotiation process
1734 * may take up to 3.5 sec, so we use this also for our ML6692
1735 * Fixme: Better to use a timer here!
1737 for (i
=0; i
< 35; i
++) {
1738 msleep(100); /* wait 100 msec */
1739 status
= mii_rd(ioaddr
, 0, 1);
1740 if ((status
& 0x0020) && (status
& 0x0004))
1744 if (!(status
& 0x0020)) {
1745 printk(KERN_INFO
"%s: autonegotiation failed;"
1746 " using 10mbs\n", dev
->name
);
1747 if (!local
->new_mii
) {
1749 mii_wr(ioaddr
, 0, 0, control
, 16);
1752 dev
->if_port
= (GetByte(XIRCREG_ESR
) & MediaSelect
) ? 1 : 2;
1755 linkpartner
= mii_rd(ioaddr
, 0, 5);
1756 printk(KERN_INFO
"%s: MII link partner: %04x\n",
1757 dev
->name
, linkpartner
);
1758 if (linkpartner
& 0x0080) {
1769 do_powerdown(struct net_device
*dev
)
1772 unsigned int ioaddr
= dev
->base_addr
;
1774 pr_debug("do_powerdown(%p)\n", dev
);
1777 PutByte(XIRCREG4_GPR1
, 0); /* clear bit 0: power down */
1782 do_stop(struct net_device
*dev
)
1784 unsigned int ioaddr
= dev
->base_addr
;
1785 local_info_t
*lp
= netdev_priv(dev
);
1786 struct pcmcia_device
*link
= lp
->p_dev
;
1788 dev_dbg(&link
->dev
, "do_stop(%p)\n", dev
);
1793 netif_stop_queue(dev
);
1796 PutByte(XIRCREG_CR
, 0); /* disable interrupts */
1798 PutByte(XIRCREG1_IMR0
, 0x00); /* forbid all ints */
1800 PutByte(XIRCREG4_GPR1
, 0); /* clear bit 0: power down */
1807 static struct pcmcia_device_id xirc2ps_ids
[] = {
1808 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0089, 0x110a),
1809 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0138, 0x110a),
1810 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
1811 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
1812 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
1813 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
1814 PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
1815 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
1816 PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a),
1817 PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2),
1818 PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37),
1819 PCMCIA_DEVICE_PROD_ID13("Xircom", "PS-CE2-10", 0x2e3ee845, 0x947d9073),
1820 PCMCIA_DEVICE_PROD_ID13("Xircom", "R2E-100BTX", 0x2e3ee845, 0x2464a6e3),
1821 PCMCIA_DEVICE_PROD_ID13("Xircom", "RE-10", 0x2e3ee845, 0x3e08d609),
1822 PCMCIA_DEVICE_PROD_ID13("Xircom", "XE2000", 0x2e3ee845, 0xf7188e46),
1823 PCMCIA_DEVICE_PROD_ID12("Compaq", "Ethernet LAN Card", 0x54f7c49c, 0x9fd2f0a2),
1824 PCMCIA_DEVICE_PROD_ID12("Compaq", "Netelligent 10/100 PC Card", 0x54f7c49c, 0xefe96769),
1825 PCMCIA_DEVICE_PROD_ID12("Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16", 0x816cc815, 0x174397db),
1826 PCMCIA_DEVICE_PROD_ID12("Toshiba", "10/100 Ethernet PC Card", 0x44a09d9c, 0xb44deecf),
1827 /* also matches CFE-10 cards! */
1828 /* PCMCIA_DEVICE_MANF_CARD(0x0105, 0x010a), */
1831 MODULE_DEVICE_TABLE(pcmcia
, xirc2ps_ids
);
1834 static struct pcmcia_driver xirc2ps_cs_driver
= {
1835 .owner
= THIS_MODULE
,
1837 .name
= "xirc2ps_cs",
1839 .probe
= xirc2ps_probe
,
1840 .remove
= xirc2ps_detach
,
1841 .id_table
= xirc2ps_ids
,
1842 .suspend
= xirc2ps_suspend
,
1843 .resume
= xirc2ps_resume
,
1847 init_xirc2ps_cs(void)
1849 return pcmcia_register_driver(&xirc2ps_cs_driver
);
1853 exit_xirc2ps_cs(void)
1855 pcmcia_unregister_driver(&xirc2ps_cs_driver
);
1858 module_init(init_xirc2ps_cs
);
1859 module_exit(exit_xirc2ps_cs
);
1862 static int __init
setup_xirc2ps_cs(char *str
)
1864 /* if_port, full_duplex, do_sound, lockup_hack
1866 int ints
[10] = { -1 };
1868 str
= get_options(str
, 9, ints
);
1870 #define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; }
1871 MAYBE_SET(if_port
, 3);
1872 MAYBE_SET(full_duplex
, 4);
1873 MAYBE_SET(do_sound
, 5);
1874 MAYBE_SET(lockup_hack
, 6);
1880 __setup("xirc2ps_cs=", setup_xirc2ps_cs
);