2 # PHY Layer Configuration
6 tristate "PHY Device support and infrastructure"
9 Ethernet controllers are usually attached to PHY
10 devices. This option provides infrastructure for
18 comment "MDIO bus device drivers"
21 tristate "Broadcom iProc MDIO bus controller"
22 depends on ARCH_BCM_IPROC || COMPILE_TEST
23 depends on HAS_IOMEM && OF_MDIO
25 This module provides a driver for the MDIO busses found in the
28 config MDIO_BCM_UNIMAC
29 tristate "Broadcom UniMAC MDIO bus controller"
32 This module provides a driver for the Broadcom UniMAC MDIO busses.
33 This hardware can be found in the Broadcom GENET Ethernet MAC
34 controllers as well as some Broadcom Ethernet switches such as the
35 Starfighter 2 switches.
38 tristate "Bitbanged MDIO buses"
40 This module implements the MDIO bus protocol in software,
41 for use by low level drivers that export the ability to
42 drive the relevant pins.
50 This module provides a driver framework for MDIO bus
51 multiplexers which connect one of several child MDIO busses
52 to a parent bus. Switching between child busses is done by
53 device specific drivers.
55 config MDIO_BUS_MUX_BCM_IPROC
56 tristate "Broadcom iProc based MDIO bus multiplexers"
57 depends on OF && OF_MDIO && (ARCH_BCM_IPROC || COMPILE_TEST)
59 default ARCH_BCM_IPROC
61 This module provides a driver for MDIO bus multiplexers found in
62 iProc based Broadcom SoCs. This multiplexer connects one of several
63 child MDIO bus to a parent bus. Buses could be internal as well as
64 external and selection logic lies inside the same multiplexer.
66 config MDIO_BUS_MUX_GPIO
67 tristate "GPIO controlled MDIO bus multiplexers"
68 depends on OF_GPIO && OF_MDIO
71 This module provides a driver for MDIO bus multiplexers that
72 are controlled via GPIO lines. The multiplexer connects one of
73 several child MDIO busses to a parent bus. Child bus
74 selection is under the control of GPIO lines.
76 config MDIO_BUS_MUX_MMIOREG
77 tristate "MMIO device-controlled MDIO bus multiplexers"
78 depends on OF_MDIO && HAS_IOMEM
81 This module provides a driver for MDIO bus multiplexers that
82 are controlled via a simple memory-mapped device, like an FPGA.
83 The multiplexer connects one of several child MDIO busses to a
84 parent bus. Child bus selection is under the control of one of
87 Currently, only 8-bit registers are supported.
93 tristate "GPIO lib-based bitbanged MDIO buses"
94 depends on MDIO_BITBANG && GPIOLIB
96 Supports GPIO lib-based MDIO busses.
98 To compile this driver as a module, choose M here: the module
99 will be called mdio-gpio.
101 config MDIO_HISI_FEMAC
102 tristate "Hisilicon FEMAC MDIO bus controller"
103 depends on HAS_IOMEM && OF_MDIO
105 This module provides a driver for the MDIO busses found in the
106 Hisilicon SoC that have an Fast Ethernet MAC.
109 tristate "MOXA ART MDIO interface support"
110 depends on ARCH_MOXART
112 This driver supports the MDIO interface found in the network
113 interface units of the MOXA ART SoC
116 tristate "Octeon and some ThunderX SOCs MDIO buses"
121 This module provides a driver for the Octeon and ThunderX MDIO
122 buses. It is required by the Octeon and ThunderX ethernet device
123 drivers on some systems.
126 tristate "Allwinner sun4i MDIO interface support"
127 depends on ARCH_SUNXI
129 This driver supports the MDIO interface found in the network
130 interface units of the Allwinner SoC that have an EMAC (A10,
134 tristate "ThunderX SOCs MDIO buses"
139 This driver supports the MDIO interfaces found on Cavium
140 ThunderX SoCs when the MDIO bus device appears as a PCI
144 tristate "APM X-Gene SoC MDIO bus controller"
146 This module provides a driver for the MDIO busses found in the
149 comment "MII PHY device drivers"
154 Currently supports the am79c874
157 tristate "Aquantia PHYs"
159 Currently supports the Aquantia AQ1202, AQ2104, AQR105, AQR405
162 tristate "AT803X PHYs"
164 Currently supports the AT8030 and AT8035 model
167 tristate "Broadcom 63xx SOCs internal PHY"
169 select BCM_NET_PHYLIB
171 Currently supports the 6348 and 6358 PHYs.
174 tristate "Broadcom 7xxx SOCs internal PHYs"
175 select BCM_NET_PHYLIB
177 Currently supports the BCM7366, BCM7439, BCM7445, and
178 40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
181 tristate "Broadcom BCM8706 and BCM8727 PHYs"
183 Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
185 config BCM_CYGNUS_PHY
186 tristate "Broadcom Cygnus SoC internal PHY"
187 depends on ARCH_BCM_CYGNUS || COMPILE_TEST
188 depends on MDIO_BCM_IPROC
189 select BCM_NET_PHYLIB
191 This PHY driver is for the 1G internal PHYs of the Broadcom
194 Currently supports internal PHY's used in the BCM11300,
195 BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
196 BCM58303 & BCM58305 Broadcom Cygnus SoCs.
198 config BCM_NET_PHYLIB
202 tristate "Broadcom PHYs"
203 select BCM_NET_PHYLIB
205 Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
206 BCM5481 and BCM5482 PHYs.
209 tristate "Cicada PHYs"
211 Currently supports the cis8204
214 tristate "Davicom PHYs"
216 Currently supports dm9161e and dm9131
219 tristate "Texas Instruments DP83848 PHY"
221 Supports the DP83848 PHY.
224 tristate "Texas Instruments DP83867 Gigabit PHY"
226 Currently supports the DP83867 PHY.
229 tristate "MDIO Bus/PHY emulation with fixed speed/link PHYs"
233 Adds the platform "fixed" MDIO Bus to cover the boards that use
234 PHYs that are not connected to the real MDIO bus.
236 Currently tested with mpc866ads and mpc8349e-mitx.
239 tristate "ICPlus PHYs"
241 Currently supports the IP175C and IP1001 PHYs.
243 config INTEL_XWAY_PHY
244 tristate "Intel XWAY PHYs"
246 Supports the Intel XWAY (former Lantiq) 11G and 22E PHYs.
247 These PHYs are marked as standalone chips under the names
248 PEF 7061, PEF 7071 and PEF 7072 or integrated into the Intel
249 SoCs xRX200, xRX300, xRX330, xRX350 and xRX550.
251 config LSI_ET1011C_PHY
252 tristate "LSI ET1011C PHY"
254 Supports the LSI ET1011C PHY.
257 tristate "Intel LXT PHYs"
259 Currently supports the lxt970, lxt971
262 tristate "Marvell PHYs"
264 Currently has a driver for the 88E1011S
267 tristate "Micrel PHYs"
269 Supports the KSZ9021, VSC8201, KS8001 PHYs.
272 tristate "Microchip PHYs"
274 Supports the LAN88XX PHYs.
277 tristate "Microsemi PHYs"
279 Currently supports the VSC8531 and VSC8541 PHYs
282 tristate "National Semiconductor PHYs"
284 Currently supports the DP83865 PHY.
287 tristate "Quality Semiconductor PHYs"
289 Currently supports the qs6612
292 tristate "Realtek PHYs"
294 Supports the Realtek 821x PHY.
299 Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
302 tristate "STMicroelectronics STe10Xp PHYs"
304 This is the driver for the STe100p and STe101p PHYs.
306 config TERANETICS_PHY
307 tristate "Teranetics PHYs"
309 Currently supports the Teranetics TN2020
312 tristate "Vitesse PHYs"
314 Currently supports the vsc8244
316 config XILINX_GMII2RGMII
317 tristate "Xilinx GMII2RGMII converter driver"
319 This driver support xilinx GMII to RGMII IP core it provides
320 the Reduced Gigabit Media Independent Interface(RGMII) between
321 Ethernet physical media devices and the Gigabit Ethernet controller.
325 config MICREL_KS8995MA
326 tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"