drivers/net/phy/Kconfig

   1 #
   2 # PHY Layer Configuration
   3 #
   4
   5 menuconfig PHYLIB
   6         tristate "PHY Device support and infrastructure"
   7         depends on NETDEVICES
   8         help
   9           Ethernet controllers are usually attached to PHY
  10           devices.  This option provides infrastructure for
  11           managing PHY devices.
  12
  13 if PHYLIB
  14
  15 comment "MII PHY device drivers"
  16
  17 config AT803X_PHY
  18         tristate "Drivers for Atheros AT803X PHYs"
  19         ---help---
  20           Currently supports the AT8030 and AT8035 model
  21
  22 config AMD_PHY
  23         tristate "Drivers for the AMD PHYs"
  24         ---help---
  25           Currently supports the am79c874
  26
  27 config MARVELL_PHY
  28         tristate "Drivers for Marvell PHYs"
  29         ---help---
  30           Currently has a driver for the 88E1011S
  31
  32 config DAVICOM_PHY
  33         tristate "Drivers for Davicom PHYs"
  34         ---help---
  35           Currently supports dm9161e and dm9131
  36
  37 config QSEMI_PHY
  38         tristate "Drivers for Quality Semiconductor PHYs"
  39         ---help---
  40           Currently supports the qs6612
  41
  42 config LXT_PHY
  43         tristate "Drivers for the Intel LXT PHYs"
  44         ---help---
  45           Currently supports the lxt970, lxt971
  46
  47 config CICADA_PHY
  48         tristate "Drivers for the Cicada PHYs"
  49         ---help---
  50           Currently supports the cis8204
  51
  52 config VITESSE_PHY
  53         tristate "Drivers for the Vitesse PHYs"
  54         ---help---
  55           Currently supports the vsc8244
  56
  57 config SMSC_PHY
  58         tristate "Drivers for SMSC PHYs"
  59         ---help---
  60           Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
  61
  62 config BROADCOM_PHY
  63         tristate "Drivers for Broadcom PHYs"
  64         ---help---
  65           Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
  66           BCM5481 and BCM5482 PHYs.
  67
  68 config BCM63XX_PHY
  69         tristate "Drivers for Broadcom 63xx SOCs internal PHY"
  70         depends on BCM63XX
  71         ---help---
  72           Currently supports the 6348 and 6358 PHYs.
  73
  74 config BCM7XXX_PHY
  75         tristate "Drivers for Broadcom 7xxx SOCs internal PHYs"
  76         ---help---
  77           Currently supports the BCM7366, BCM7439, BCM7445, and
  78           40nm and 65nm generation of BCM7xxx Set Top Box SoCs.
  79
  80 config BCM87XX_PHY
  81         tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs"
  82         help
  83           Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs.
  84
  85 config ICPLUS_PHY
  86         tristate "Drivers for ICPlus PHYs"
  87         ---help---
  88           Currently supports the IP175C and IP1001 PHYs.
  89
  90 config REALTEK_PHY
  91         tristate "Drivers for Realtek PHYs"
  92         ---help---
  93           Supports the Realtek 821x PHY.
  94
  95 config NATIONAL_PHY
  96         tristate "Drivers for National Semiconductor PHYs"
  97         ---help---
  98           Currently supports the DP83865 PHY.
  99
 100 config STE10XP
 101         tristate "Driver for STMicroelectronics STe10Xp PHYs"
 102         ---help---
 103           This is the driver for the STe100p and STe101p PHYs.
 104
 105 config LSI_ET1011C_PHY
 106         tristate "Driver for LSI ET1011C PHY"
 107         ---help---
 108           Supports the LSI ET1011C PHY.
 109
 110 config MICREL_PHY
 111         tristate "Driver for Micrel PHYs"
 112         ---help---
 113           Supports the KSZ9021, VSC8201, KS8001 PHYs.
 114
 115 config DP83867_PHY
 116         tristate "Drivers for Texas Instruments DP83867 Gigabit PHY"
 117         ---help---
 118           Currently supports the DP83867 PHY.
 119
 120 config FIXED_PHY
 121         tristate "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
 122         depends on PHYLIB
 123         ---help---
 124           Adds the platform "fixed" MDIO Bus to cover the boards that use
 125           PHYs that are not connected to the real MDIO bus.
 126
 127           Currently tested with mpc866ads and mpc8349e-mitx.
 128
 129 config MDIO_BITBANG
 130         tristate "Support for bitbanged MDIO buses"
 131         help
 132           This module implements the MDIO bus protocol in software,
 133           for use by low level drivers that export the ability to
 134           drive the relevant pins.
 135
 136           If in doubt, say N.
 137
 138 config MDIO_GPIO
 139         tristate "Support for GPIO lib-based bitbanged MDIO buses"
 140         depends on MDIO_BITBANG && GPIOLIB
 141         ---help---
 142           Supports GPIO lib-based MDIO busses.
 143
 144           To compile this driver as a module, choose M here: the module
 145           will be called mdio-gpio.
 146
 147 config MDIO_OCTEON
 148         tristate "Support for MDIO buses on Octeon SOCs"
 149         depends on CAVIUM_OCTEON_SOC
 150         default y
 151         help
 152
 153           This module provides a driver for the Octeon MDIO busses.
 154           It is required by the Octeon Ethernet device drivers.
 155
 156           If in doubt, say Y.
 157
 158 config MDIO_SUN4I
 159         tristate "Allwinner sun4i MDIO interface support"
 160         depends on ARCH_SUNXI
 161         help
 162           This driver supports the MDIO interface found in the network
 163           interface units of the Allwinner SoC that have an EMAC (A10,
 164           A12, A10s, etc.)
 165
 166 config MDIO_MOXART
 167         tristate "MOXA ART MDIO interface support"
 168         depends on ARCH_MOXART
 169         help
 170           This driver supports the MDIO interface found in the network
 171           interface units of the MOXA ART SoC
 172
 173 config MDIO_BUS_MUX
 174         tristate
 175         depends on OF_MDIO
 176         help
 177           This module provides a driver framework for MDIO bus
 178           multiplexers which connect one of several child MDIO busses
 179           to a parent bus.  Switching between child busses is done by
 180           device specific drivers.
 181
 182 config MDIO_BUS_MUX_GPIO
 183         tristate "Support for GPIO controlled MDIO bus multiplexers"
 184         depends on OF_GPIO && OF_MDIO
 185         select MDIO_BUS_MUX
 186         help
 187           This module provides a driver for MDIO bus multiplexers that
 188           are controlled via GPIO lines.  The multiplexer connects one of
 189           several child MDIO busses to a parent bus.  Child bus
 190           selection is under the control of GPIO lines.
 191
 192 config MDIO_BUS_MUX_MMIOREG
 193         tristate "Support for MMIO device-controlled MDIO bus multiplexers"
 194         depends on OF_MDIO
 195         select MDIO_BUS_MUX
 196         help
 197           This module provides a driver for MDIO bus multiplexers that
 198           are controlled via a simple memory-mapped device, like an FPGA.
 199           The multiplexer connects one of several child MDIO busses to a
 200           parent bus.  Child bus selection is under the control of one of
 201           the FPGA's registers.
 202
 203           Currently, only 8-bit registers are supported.
 204
 205 config MDIO_BCM_UNIMAC
 206         tristate "Broadcom UniMAC MDIO bus controller"
 207         depends on HAS_IOMEM
 208         help
 209           This module provides a driver for the Broadcom UniMAC MDIO busses.
 210           This hardware can be found in the Broadcom GENET Ethernet MAC
 211           controllers as well as some Broadcom Ethernet switches such as the
 212           Starfighter 2 switches.
 213 endif # PHYLIB
 214
 215 config MICREL_KS8995MA
 216         tristate "Micrel KS8995MA 5-ports 10/100 managed Ethernet switch"
 217         depends on SPI