drivers/net/phy/Kconfig

   1 #
   2 # PHY Layer Configuration
   3 #
   4
   5 menuconfig PHYLIB
   6         tristate "PHY Device support and infrastructure"
   7         depends on !S390
   8         depends on NET_ETHERNET
   9         help
  10           Ethernet controllers are usually attached to PHY
  11           devices.  This option provides infrastructure for
  12           managing PHY devices.
  13
  14 if PHYLIB
  15
  16 comment "MII PHY device drivers"
  17
  18 config MARVELL_PHY
  19         tristate "Drivers for Marvell PHYs"
  20         ---help---
  21           Currently has a driver for the 88E1011S
  22
  23 config DAVICOM_PHY
  24         tristate "Drivers for Davicom PHYs"
  25         ---help---
  26           Currently supports dm9161e and dm9131
  27
  28 config QSEMI_PHY
  29         tristate "Drivers for Quality Semiconductor PHYs"
  30         ---help---
  31           Currently supports the qs6612
  32
  33 config LXT_PHY
  34         tristate "Drivers for the Intel LXT PHYs"
  35         ---help---
  36           Currently supports the lxt970, lxt971
  37
  38 config CICADA_PHY
  39         tristate "Drivers for the Cicada PHYs"
  40         ---help---
  41           Currently supports the cis8204
  42
  43 config VITESSE_PHY
  44         tristate "Drivers for the Vitesse PHYs"
  45         ---help---
  46           Currently supports the vsc8244
  47
  48 config SMSC_PHY
  49         tristate "Drivers for SMSC PHYs"
  50         ---help---
  51           Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs
  52
  53 config BROADCOM_PHY
  54         tristate "Drivers for Broadcom PHYs"
  55         ---help---
  56           Currently supports the BCM5411, BCM5421, BCM5461, BCM5464, BCM5481
  57           and BCM5482 PHYs.
  58
  59 config ICPLUS_PHY
  60         tristate "Drivers for ICPlus PHYs"
  61         ---help---
  62           Currently supports the IP175C PHY.
  63
  64 config REALTEK_PHY
  65         tristate "Drivers for Realtek PHYs"
  66         ---help---
  67           Supports the Realtek 821x PHY.
  68
  69 config FIXED_PHY
  70         bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
  71         depends on PHYLIB=y
  72         ---help---
  73           Adds the platform "fixed" MDIO Bus to cover the boards that use
  74           PHYs that are not connected to the real MDIO bus.
  75
  76           Currently tested with mpc866ads and mpc8349e-mitx.
  77
  78 config MDIO_BITBANG
  79         tristate "Support for bitbanged MDIO buses"
  80         help
  81           This module implements the MDIO bus protocol in software,
  82           for use by low level drivers that export the ability to
  83           drive the relevant pins.
  84
  85           If in doubt, say N.
  86
  87 config MDIO_OF_GPIO
  88         tristate "Support for GPIO lib-based bitbanged MDIO buses"
  89         depends on MDIO_BITBANG && OF_GPIO
  90         ---help---
  91           Supports GPIO lib-based MDIO busses.
  92
  93 endif # PHYLIB