1 /****************************************************************************
2 * Driver for Solarflare Solarstorm network controllers and boards
3 * Copyright 2005-2006 Fen Systems Ltd.
4 * Copyright 2005-2008 Solarflare Communications Inc.
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation, incorporated herein by reference.
11 #include <linux/module.h>
12 #include <linux/pci.h>
13 #include <linux/netdevice.h>
14 #include <linux/etherdevice.h>
15 #include <linux/delay.h>
16 #include <linux/notifier.h>
18 #include <linux/tcp.h>
20 #include <linux/crc32.h>
21 #include <linux/ethtool.h>
22 #include "net_driver.h"
30 #include "workarounds.h"
33 #define EFX_MAX_MTU (9 * 1024)
35 /* RX slow fill workqueue. If memory allocation fails in the fast path,
36 * a work item is pushed onto this work queue to retry the allocation later,
37 * to avoid the NIC being starved of RX buffers. Since this is a per cpu
38 * workqueue, there is nothing to be gained in making it per NIC
40 static struct workqueue_struct
*refill_workqueue
;
42 /**************************************************************************
46 *************************************************************************/
49 * Enable large receive offload (LRO) aka soft segment reassembly (SSR)
51 * This sets the default for new devices. It can be controlled later
55 module_param(lro
, int, 0644);
56 MODULE_PARM_DESC(lro
, "Large receive offload acceleration");
59 * Use separate channels for TX and RX events
61 * Set this to 1 to use separate channels for TX and RX. It allows us to
62 * apply a higher level of interrupt moderation to TX events.
64 * This is forced to 0 for MSI interrupt mode as the interrupt vector
67 static unsigned int separate_tx_and_rx_channels
= 1;
69 /* This is the weight assigned to each of the (per-channel) virtual
72 static int napi_weight
= 64;
74 /* This is the time (in jiffies) between invocations of the hardware
75 * monitor, which checks for known hardware bugs and resets the
76 * hardware and driver as necessary.
78 unsigned int efx_monitor_interval
= 1 * HZ
;
80 /* This controls whether or not the hardware monitor will trigger a
81 * reset when it detects an error condition.
83 static unsigned int monitor_reset
= 1;
85 /* This controls whether or not the driver will initialise devices
86 * with invalid MAC addresses stored in the EEPROM or flash. If true,
87 * such devices will be initialised with a random locally-generated
88 * MAC address. This allows for loading the sfc_mtd driver to
89 * reprogram the flash, even if the flash contents (including the MAC
90 * address) have previously been erased.
92 static unsigned int allow_bad_hwaddr
;
94 /* Initial interrupt moderation settings. They can be modified after
95 * module load with ethtool.
97 * The default for RX should strike a balance between increasing the
98 * round-trip latency and reducing overhead.
100 static unsigned int rx_irq_mod_usec
= 60;
102 /* Initial interrupt moderation settings. They can be modified after
103 * module load with ethtool.
105 * This default is chosen to ensure that a 10G link does not go idle
106 * while a TX queue is stopped after it has become full. A queue is
107 * restarted when it drops below half full. The time this takes (assuming
108 * worst case 3 descriptors per packet and 1024 descriptors) is
109 * 512 / 3 * 1.2 = 205 usec.
111 static unsigned int tx_irq_mod_usec
= 150;
113 /* This is the first interrupt mode to try out of:
118 static unsigned int interrupt_mode
;
120 /* This is the requested number of CPUs to use for Receive-Side Scaling (RSS),
121 * i.e. the number of CPUs among which we may distribute simultaneous
122 * interrupt handling.
124 * Cards without MSI-X will only target one CPU via legacy or MSI interrupt.
125 * The default (0) means to assign an interrupt to each package (level II cache)
127 static unsigned int rss_cpus
;
128 module_param(rss_cpus
, uint
, 0444);
129 MODULE_PARM_DESC(rss_cpus
, "Number of CPUs to use for Receive-Side Scaling");
131 /**************************************************************************
133 * Utility functions and prototypes
135 *************************************************************************/
136 static void efx_remove_channel(struct efx_channel
*channel
);
137 static void efx_remove_port(struct efx_nic
*efx
);
138 static void efx_fini_napi(struct efx_nic
*efx
);
139 static void efx_fini_channels(struct efx_nic
*efx
);
141 #define EFX_ASSERT_RESET_SERIALISED(efx) \
143 if ((efx->state == STATE_RUNNING) || \
144 (efx->state == STATE_RESETTING)) \
148 /**************************************************************************
150 * Event queue processing
152 *************************************************************************/
154 /* Process channel's event queue
156 * This function is responsible for processing the event queue of a
157 * single channel. The caller must guarantee that this function will
158 * never be concurrently called more than once on the same channel,
159 * though different channels may be being processed concurrently.
161 static inline int efx_process_channel(struct efx_channel
*channel
, int rx_quota
)
164 struct efx_rx_queue
*rx_queue
;
166 if (unlikely(channel
->efx
->reset_pending
!= RESET_TYPE_NONE
||
170 rxdmaqs
= falcon_process_eventq(channel
, &rx_quota
);
172 /* Deliver last RX packet. */
173 if (channel
->rx_pkt
) {
174 __efx_rx_packet(channel
, channel
->rx_pkt
,
175 channel
->rx_pkt_csummed
);
176 channel
->rx_pkt
= NULL
;
179 efx_flush_lro(channel
);
180 efx_rx_strategy(channel
);
182 /* Refill descriptor rings as necessary */
183 rx_queue
= &channel
->efx
->rx_queue
[0];
186 efx_fast_push_rx_descriptors(rx_queue
);
194 /* Mark channel as finished processing
196 * Note that since we will not receive further interrupts for this
197 * channel before we finish processing and call the eventq_read_ack()
198 * method, there is no need to use the interrupt hold-off timers.
200 static inline void efx_channel_processed(struct efx_channel
*channel
)
202 /* Write to EVQ_RPTR_REG. If a new event arrived in a race
203 * with finishing processing, a new interrupt will be raised.
205 channel
->work_pending
= 0;
206 smp_wmb(); /* Ensure channel updated before any new interrupt. */
207 falcon_eventq_read_ack(channel
);
212 * NAPI guarantees serialisation of polls of the same device, which
213 * provides the guarantee required by efx_process_channel().
215 static int efx_poll(struct napi_struct
*napi
, int budget
)
217 struct efx_channel
*channel
=
218 container_of(napi
, struct efx_channel
, napi_str
);
219 struct net_device
*napi_dev
= channel
->napi_dev
;
223 EFX_TRACE(channel
->efx
, "channel %d NAPI poll executing on CPU %d\n",
224 channel
->channel
, raw_smp_processor_id());
226 unused
= efx_process_channel(channel
, budget
);
227 rx_packets
= (budget
- unused
);
229 if (rx_packets
< budget
) {
230 /* There is no race here; although napi_disable() will
231 * only wait for netif_rx_complete(), this isn't a problem
232 * since efx_channel_processed() will have no effect if
233 * interrupts have already been disabled.
235 netif_rx_complete(napi_dev
, napi
);
236 efx_channel_processed(channel
);
242 /* Process the eventq of the specified channel immediately on this CPU
244 * Disable hardware generated interrupts, wait for any existing
245 * processing to finish, then directly poll (and ack ) the eventq.
246 * Finally reenable NAPI and interrupts.
248 * Since we are touching interrupts the caller should hold the suspend lock
250 void efx_process_channel_now(struct efx_channel
*channel
)
252 struct efx_nic
*efx
= channel
->efx
;
254 BUG_ON(!channel
->used_flags
);
255 BUG_ON(!channel
->enabled
);
257 /* Disable interrupts and wait for ISRs to complete */
258 falcon_disable_interrupts(efx
);
260 synchronize_irq(efx
->legacy_irq
);
261 if (channel
->has_interrupt
&& channel
->irq
)
262 synchronize_irq(channel
->irq
);
264 /* Wait for any NAPI processing to complete */
265 napi_disable(&channel
->napi_str
);
267 /* Poll the channel */
268 efx_process_channel(channel
, efx
->type
->evq_size
);
270 /* Ack the eventq. This may cause an interrupt to be generated
271 * when they are reenabled */
272 efx_channel_processed(channel
);
274 napi_enable(&channel
->napi_str
);
275 falcon_enable_interrupts(efx
);
278 /* Create event queue
279 * Event queue memory allocations are done only once. If the channel
280 * is reset, the memory buffer will be reused; this guards against
281 * errors during channel reset and also simplifies interrupt handling.
283 static int efx_probe_eventq(struct efx_channel
*channel
)
285 EFX_LOG(channel
->efx
, "chan %d create event queue\n", channel
->channel
);
287 return falcon_probe_eventq(channel
);
290 /* Prepare channel's event queue */
291 static int efx_init_eventq(struct efx_channel
*channel
)
293 EFX_LOG(channel
->efx
, "chan %d init event queue\n", channel
->channel
);
295 channel
->eventq_read_ptr
= 0;
297 return falcon_init_eventq(channel
);
300 static void efx_fini_eventq(struct efx_channel
*channel
)
302 EFX_LOG(channel
->efx
, "chan %d fini event queue\n", channel
->channel
);
304 falcon_fini_eventq(channel
);
307 static void efx_remove_eventq(struct efx_channel
*channel
)
309 EFX_LOG(channel
->efx
, "chan %d remove event queue\n", channel
->channel
);
311 falcon_remove_eventq(channel
);
314 /**************************************************************************
318 *************************************************************************/
320 static int efx_probe_channel(struct efx_channel
*channel
)
322 struct efx_tx_queue
*tx_queue
;
323 struct efx_rx_queue
*rx_queue
;
326 EFX_LOG(channel
->efx
, "creating channel %d\n", channel
->channel
);
328 rc
= efx_probe_eventq(channel
);
332 efx_for_each_channel_tx_queue(tx_queue
, channel
) {
333 rc
= efx_probe_tx_queue(tx_queue
);
338 efx_for_each_channel_rx_queue(rx_queue
, channel
) {
339 rc
= efx_probe_rx_queue(rx_queue
);
344 channel
->n_rx_frm_trunc
= 0;
349 efx_for_each_channel_rx_queue(rx_queue
, channel
)
350 efx_remove_rx_queue(rx_queue
);
352 efx_for_each_channel_tx_queue(tx_queue
, channel
)
353 efx_remove_tx_queue(tx_queue
);
359 /* Channels are shutdown and reinitialised whilst the NIC is running
360 * to propagate configuration changes (mtu, checksum offload), or
361 * to clear hardware error conditions
363 static int efx_init_channels(struct efx_nic
*efx
)
365 struct efx_tx_queue
*tx_queue
;
366 struct efx_rx_queue
*rx_queue
;
367 struct efx_channel
*channel
;
370 /* Calculate the rx buffer allocation parameters required to
371 * support the current MTU, including padding for header
372 * alignment and overruns.
374 efx
->rx_buffer_len
= (max(EFX_PAGE_IP_ALIGN
, NET_IP_ALIGN
) +
375 EFX_MAX_FRAME_LEN(efx
->net_dev
->mtu
) +
376 efx
->type
->rx_buffer_padding
);
377 efx
->rx_buffer_order
= get_order(efx
->rx_buffer_len
);
379 /* Initialise the channels */
380 efx_for_each_channel(channel
, efx
) {
381 EFX_LOG(channel
->efx
, "init chan %d\n", channel
->channel
);
383 rc
= efx_init_eventq(channel
);
387 efx_for_each_channel_tx_queue(tx_queue
, channel
) {
388 rc
= efx_init_tx_queue(tx_queue
);
393 /* The rx buffer allocation strategy is MTU dependent */
394 efx_rx_strategy(channel
);
396 efx_for_each_channel_rx_queue(rx_queue
, channel
) {
397 rc
= efx_init_rx_queue(rx_queue
);
402 WARN_ON(channel
->rx_pkt
!= NULL
);
403 efx_rx_strategy(channel
);
409 EFX_ERR(efx
, "failed to initialise channel %d\n",
410 channel
? channel
->channel
: -1);
411 efx_fini_channels(efx
);
415 /* This enables event queue processing and packet transmission.
417 * Note that this function is not allowed to fail, since that would
418 * introduce too much complexity into the suspend/resume path.
420 static void efx_start_channel(struct efx_channel
*channel
)
422 struct efx_rx_queue
*rx_queue
;
424 EFX_LOG(channel
->efx
, "starting chan %d\n", channel
->channel
);
426 if (!(channel
->efx
->net_dev
->flags
& IFF_UP
))
427 netif_napi_add(channel
->napi_dev
, &channel
->napi_str
,
428 efx_poll
, napi_weight
);
430 channel
->work_pending
= 0;
431 channel
->enabled
= 1;
432 smp_wmb(); /* ensure channel updated before first interrupt */
434 napi_enable(&channel
->napi_str
);
436 /* Load up RX descriptors */
437 efx_for_each_channel_rx_queue(rx_queue
, channel
)
438 efx_fast_push_rx_descriptors(rx_queue
);
441 /* This disables event queue processing and packet transmission.
442 * This function does not guarantee that all queue processing
443 * (e.g. RX refill) is complete.
445 static void efx_stop_channel(struct efx_channel
*channel
)
447 struct efx_rx_queue
*rx_queue
;
449 if (!channel
->enabled
)
452 EFX_LOG(channel
->efx
, "stop chan %d\n", channel
->channel
);
454 channel
->enabled
= 0;
455 napi_disable(&channel
->napi_str
);
457 /* Ensure that any worker threads have exited or will be no-ops */
458 efx_for_each_channel_rx_queue(rx_queue
, channel
) {
459 spin_lock_bh(&rx_queue
->add_lock
);
460 spin_unlock_bh(&rx_queue
->add_lock
);
464 static void efx_fini_channels(struct efx_nic
*efx
)
466 struct efx_channel
*channel
;
467 struct efx_tx_queue
*tx_queue
;
468 struct efx_rx_queue
*rx_queue
;
470 EFX_ASSERT_RESET_SERIALISED(efx
);
471 BUG_ON(efx
->port_enabled
);
473 efx_for_each_channel(channel
, efx
) {
474 EFX_LOG(channel
->efx
, "shut down chan %d\n", channel
->channel
);
476 efx_for_each_channel_rx_queue(rx_queue
, channel
)
477 efx_fini_rx_queue(rx_queue
);
478 efx_for_each_channel_tx_queue(tx_queue
, channel
)
479 efx_fini_tx_queue(tx_queue
);
482 /* Do the event queues last so that we can handle flush events
483 * for all DMA queues. */
484 efx_for_each_channel(channel
, efx
) {
485 EFX_LOG(channel
->efx
, "shut down evq %d\n", channel
->channel
);
487 efx_fini_eventq(channel
);
491 static void efx_remove_channel(struct efx_channel
*channel
)
493 struct efx_tx_queue
*tx_queue
;
494 struct efx_rx_queue
*rx_queue
;
496 EFX_LOG(channel
->efx
, "destroy chan %d\n", channel
->channel
);
498 efx_for_each_channel_rx_queue(rx_queue
, channel
)
499 efx_remove_rx_queue(rx_queue
);
500 efx_for_each_channel_tx_queue(tx_queue
, channel
)
501 efx_remove_tx_queue(tx_queue
);
502 efx_remove_eventq(channel
);
504 channel
->used_flags
= 0;
507 void efx_schedule_slow_fill(struct efx_rx_queue
*rx_queue
, int delay
)
509 queue_delayed_work(refill_workqueue
, &rx_queue
->work
, delay
);
512 /**************************************************************************
516 **************************************************************************/
518 /* This ensures that the kernel is kept informed (via
519 * netif_carrier_on/off) of the link status, and also maintains the
520 * link status's stop on the port's TX queue.
522 static void efx_link_status_changed(struct efx_nic
*efx
)
526 /* SFC Bug 5356: A net_dev notifier is registered, so we must ensure
527 * that no events are triggered between unregister_netdev() and the
528 * driver unloading. A more general condition is that NETDEV_CHANGE
529 * can only be generated between NETDEV_UP and NETDEV_DOWN */
530 if (!netif_running(efx
->net_dev
))
533 carrier_ok
= netif_carrier_ok(efx
->net_dev
) ? 1 : 0;
534 if (efx
->link_up
!= carrier_ok
) {
535 efx
->n_link_state_changes
++;
538 netif_carrier_on(efx
->net_dev
);
540 netif_carrier_off(efx
->net_dev
);
543 /* Status message for kernel log */
545 struct mii_if_info
*gmii
= &efx
->mii
;
547 /* NONE here means direct XAUI from the controller, with no
548 * MDIO-attached device we can query. */
549 if (efx
->phy_type
!= PHY_TYPE_NONE
) {
550 adv
= gmii_advertised(gmii
);
551 lpa
= gmii_lpa(gmii
);
553 lpa
= GM_LPA_10000
| LPA_DUPLEX
;
556 EFX_INFO(efx
, "link up at %dMbps %s-duplex "
557 "(adv %04x lpa %04x) (MTU %d)%s\n",
558 (efx
->link_options
& GM_LPA_10000
? 10000 :
559 (efx
->link_options
& GM_LPA_1000
? 1000 :
560 (efx
->link_options
& GM_LPA_100
? 100 :
562 (efx
->link_options
& GM_LPA_DUPLEX
?
566 (efx
->promiscuous
? " [PROMISC]" : ""));
568 EFX_INFO(efx
, "link down\n");
573 /* This call reinitialises the MAC to pick up new PHY settings. The
574 * caller must hold the mac_lock */
575 static void __efx_reconfigure_port(struct efx_nic
*efx
)
577 WARN_ON(!mutex_is_locked(&efx
->mac_lock
));
579 EFX_LOG(efx
, "reconfiguring MAC from PHY settings on CPU %d\n",
580 raw_smp_processor_id());
582 falcon_reconfigure_xmac(efx
);
584 /* Inform kernel of loss/gain of carrier */
585 efx_link_status_changed(efx
);
588 /* Reinitialise the MAC to pick up new PHY settings, even if the port is
590 void efx_reconfigure_port(struct efx_nic
*efx
)
592 EFX_ASSERT_RESET_SERIALISED(efx
);
594 mutex_lock(&efx
->mac_lock
);
595 __efx_reconfigure_port(efx
);
596 mutex_unlock(&efx
->mac_lock
);
599 /* Asynchronous efx_reconfigure_port work item. To speed up efx_flush_all()
600 * we don't efx_reconfigure_port() if the port is disabled. Care is taken
601 * in efx_stop_all() and efx_start_port() to prevent PHY events being lost */
602 static void efx_reconfigure_work(struct work_struct
*data
)
604 struct efx_nic
*efx
= container_of(data
, struct efx_nic
,
607 mutex_lock(&efx
->mac_lock
);
608 if (efx
->port_enabled
)
609 __efx_reconfigure_port(efx
);
610 mutex_unlock(&efx
->mac_lock
);
613 static int efx_probe_port(struct efx_nic
*efx
)
617 EFX_LOG(efx
, "create port\n");
619 /* Connect up MAC/PHY operations table and read MAC address */
620 rc
= falcon_probe_port(efx
);
624 /* Sanity check MAC address */
625 if (is_valid_ether_addr(efx
->mac_address
)) {
626 memcpy(efx
->net_dev
->dev_addr
, efx
->mac_address
, ETH_ALEN
);
628 DECLARE_MAC_BUF(mac
);
630 EFX_ERR(efx
, "invalid MAC address %s\n",
631 print_mac(mac
, efx
->mac_address
));
632 if (!allow_bad_hwaddr
) {
636 random_ether_addr(efx
->net_dev
->dev_addr
);
637 EFX_INFO(efx
, "using locally-generated MAC %s\n",
638 print_mac(mac
, efx
->net_dev
->dev_addr
));
644 efx_remove_port(efx
);
648 static int efx_init_port(struct efx_nic
*efx
)
652 EFX_LOG(efx
, "init port\n");
654 /* Initialise the MAC and PHY */
655 rc
= falcon_init_xmac(efx
);
659 efx
->port_initialized
= 1;
661 /* Reconfigure port to program MAC registers */
662 falcon_reconfigure_xmac(efx
);
667 /* Allow efx_reconfigure_port() to be scheduled, and close the window
668 * between efx_stop_port and efx_flush_all whereby a previously scheduled
669 * efx_reconfigure_port() may have been cancelled */
670 static void efx_start_port(struct efx_nic
*efx
)
672 EFX_LOG(efx
, "start port\n");
673 BUG_ON(efx
->port_enabled
);
675 mutex_lock(&efx
->mac_lock
);
676 efx
->port_enabled
= 1;
677 __efx_reconfigure_port(efx
);
678 mutex_unlock(&efx
->mac_lock
);
681 /* Prevent efx_reconfigure_work and efx_monitor() from executing, and
682 * efx_set_multicast_list() from scheduling efx_reconfigure_work.
683 * efx_reconfigure_work can still be scheduled via NAPI processing
684 * until efx_flush_all() is called */
685 static void efx_stop_port(struct efx_nic
*efx
)
687 EFX_LOG(efx
, "stop port\n");
689 mutex_lock(&efx
->mac_lock
);
690 efx
->port_enabled
= 0;
691 mutex_unlock(&efx
->mac_lock
);
693 /* Serialise against efx_set_multicast_list() */
694 if (efx_dev_registered(efx
)) {
695 netif_tx_lock_bh(efx
->net_dev
);
696 netif_tx_unlock_bh(efx
->net_dev
);
700 static void efx_fini_port(struct efx_nic
*efx
)
702 EFX_LOG(efx
, "shut down port\n");
704 if (!efx
->port_initialized
)
707 falcon_fini_xmac(efx
);
708 efx
->port_initialized
= 0;
711 efx_link_status_changed(efx
);
714 static void efx_remove_port(struct efx_nic
*efx
)
716 EFX_LOG(efx
, "destroying port\n");
718 falcon_remove_port(efx
);
721 /**************************************************************************
725 **************************************************************************/
727 /* This configures the PCI device to enable I/O and DMA. */
728 static int efx_init_io(struct efx_nic
*efx
)
730 struct pci_dev
*pci_dev
= efx
->pci_dev
;
731 dma_addr_t dma_mask
= efx
->type
->max_dma_mask
;
734 EFX_LOG(efx
, "initialising I/O\n");
736 rc
= pci_enable_device(pci_dev
);
738 EFX_ERR(efx
, "failed to enable PCI device\n");
742 pci_set_master(pci_dev
);
744 /* Set the PCI DMA mask. Try all possibilities from our
745 * genuine mask down to 32 bits, because some architectures
746 * (e.g. x86_64 with iommu_sac_force set) will allow 40 bit
747 * masks event though they reject 46 bit masks.
749 while (dma_mask
> 0x7fffffffUL
) {
750 if (pci_dma_supported(pci_dev
, dma_mask
) &&
751 ((rc
= pci_set_dma_mask(pci_dev
, dma_mask
)) == 0))
756 EFX_ERR(efx
, "could not find a suitable DMA mask\n");
759 EFX_LOG(efx
, "using DMA mask %llx\n", (unsigned long long) dma_mask
);
760 rc
= pci_set_consistent_dma_mask(pci_dev
, dma_mask
);
762 /* pci_set_consistent_dma_mask() is not *allowed* to
763 * fail with a mask that pci_set_dma_mask() accepted,
764 * but just in case...
766 EFX_ERR(efx
, "failed to set consistent DMA mask\n");
770 efx
->membase_phys
= pci_resource_start(efx
->pci_dev
,
772 rc
= pci_request_region(pci_dev
, efx
->type
->mem_bar
, "sfc");
774 EFX_ERR(efx
, "request for memory BAR failed\n");
778 efx
->membase
= ioremap_nocache(efx
->membase_phys
,
779 efx
->type
->mem_map_size
);
781 EFX_ERR(efx
, "could not map memory BAR %d at %lx+%x\n",
782 efx
->type
->mem_bar
, efx
->membase_phys
,
783 efx
->type
->mem_map_size
);
787 EFX_LOG(efx
, "memory BAR %u at %lx+%x (virtual %p)\n",
788 efx
->type
->mem_bar
, efx
->membase_phys
, efx
->type
->mem_map_size
,
794 release_mem_region(efx
->membase_phys
, efx
->type
->mem_map_size
);
796 efx
->membase_phys
= 0;
798 pci_disable_device(efx
->pci_dev
);
803 static void efx_fini_io(struct efx_nic
*efx
)
805 EFX_LOG(efx
, "shutting down I/O\n");
808 iounmap(efx
->membase
);
812 if (efx
->membase_phys
) {
813 pci_release_region(efx
->pci_dev
, efx
->type
->mem_bar
);
814 efx
->membase_phys
= 0;
817 pci_disable_device(efx
->pci_dev
);
820 /* Probe the number and type of interrupts we are able to obtain. */
821 static void efx_probe_interrupts(struct efx_nic
*efx
)
823 int max_channel
= efx
->type
->phys_addr_channels
- 1;
824 struct msix_entry xentries
[EFX_MAX_CHANNELS
];
827 if (efx
->interrupt_mode
== EFX_INT_MODE_MSIX
) {
828 BUG_ON(!pci_find_capability(efx
->pci_dev
, PCI_CAP_ID_MSIX
));
830 efx
->rss_queues
= rss_cpus
? rss_cpus
: num_online_cpus();
831 efx
->rss_queues
= min(efx
->rss_queues
, max_channel
+ 1);
832 efx
->rss_queues
= min(efx
->rss_queues
, EFX_MAX_CHANNELS
);
834 /* Request maximum number of MSI interrupts, and fill out
835 * the channel interrupt information the allowed allocation */
836 for (i
= 0; i
< efx
->rss_queues
; i
++)
837 xentries
[i
].entry
= i
;
838 rc
= pci_enable_msix(efx
->pci_dev
, xentries
, efx
->rss_queues
);
840 EFX_BUG_ON_PARANOID(rc
>= efx
->rss_queues
);
841 efx
->rss_queues
= rc
;
842 rc
= pci_enable_msix(efx
->pci_dev
, xentries
,
847 for (i
= 0; i
< efx
->rss_queues
; i
++) {
848 efx
->channel
[i
].has_interrupt
= 1;
849 efx
->channel
[i
].irq
= xentries
[i
].vector
;
852 /* Fall back to single channel MSI */
853 efx
->interrupt_mode
= EFX_INT_MODE_MSI
;
854 EFX_ERR(efx
, "could not enable MSI-X\n");
858 /* Try single interrupt MSI */
859 if (efx
->interrupt_mode
== EFX_INT_MODE_MSI
) {
861 rc
= pci_enable_msi(efx
->pci_dev
);
863 efx
->channel
[0].irq
= efx
->pci_dev
->irq
;
864 efx
->channel
[0].has_interrupt
= 1;
866 EFX_ERR(efx
, "could not enable MSI\n");
867 efx
->interrupt_mode
= EFX_INT_MODE_LEGACY
;
871 /* Assume legacy interrupts */
872 if (efx
->interrupt_mode
== EFX_INT_MODE_LEGACY
) {
874 /* Every channel is interruptible */
875 for (i
= 0; i
< EFX_MAX_CHANNELS
; i
++)
876 efx
->channel
[i
].has_interrupt
= 1;
877 efx
->legacy_irq
= efx
->pci_dev
->irq
;
881 static void efx_remove_interrupts(struct efx_nic
*efx
)
883 struct efx_channel
*channel
;
885 /* Remove MSI/MSI-X interrupts */
886 efx_for_each_channel_with_interrupt(channel
, efx
)
888 pci_disable_msi(efx
->pci_dev
);
889 pci_disable_msix(efx
->pci_dev
);
891 /* Remove legacy interrupt */
895 /* Select number of used resources
896 * Should be called after probe_interrupts()
898 static void efx_select_used(struct efx_nic
*efx
)
900 struct efx_tx_queue
*tx_queue
;
901 struct efx_rx_queue
*rx_queue
;
904 /* TX queues. One per port per channel with TX capability
905 * (more than one per port won't work on Linux, due to out
906 * of order issues... but will be fine on Solaris)
908 tx_queue
= &efx
->tx_queue
[0];
910 /* Perform this for each channel with TX capabilities.
911 * At the moment, we only support a single TX queue
914 if ((!EFX_INT_MODE_USE_MSI(efx
)) && separate_tx_and_rx_channels
)
915 tx_queue
->channel
= &efx
->channel
[1];
917 tx_queue
->channel
= &efx
->channel
[0];
918 tx_queue
->channel
->used_flags
|= EFX_USED_BY_TX
;
921 /* RX queues. Each has a dedicated channel. */
922 for (i
= 0; i
< EFX_MAX_RX_QUEUES
; i
++) {
923 rx_queue
= &efx
->rx_queue
[i
];
925 if (i
< efx
->rss_queues
) {
927 /* If we allow multiple RX queues per channel
928 * we need to decide that here
930 rx_queue
->channel
= &efx
->channel
[rx_queue
->queue
];
931 rx_queue
->channel
->used_flags
|= EFX_USED_BY_RX
;
937 static int efx_probe_nic(struct efx_nic
*efx
)
941 EFX_LOG(efx
, "creating NIC\n");
943 /* Carry out hardware-type specific initialisation */
944 rc
= falcon_probe_nic(efx
);
948 /* Determine the number of channels and RX queues by trying to hook
949 * in MSI-X interrupts. */
950 efx_probe_interrupts(efx
);
952 /* Determine number of RX queues and TX queues */
953 efx_select_used(efx
);
955 /* Initialise the interrupt moderation settings */
956 efx_init_irq_moderation(efx
, tx_irq_mod_usec
, rx_irq_mod_usec
);
961 static void efx_remove_nic(struct efx_nic
*efx
)
963 EFX_LOG(efx
, "destroying NIC\n");
965 efx_remove_interrupts(efx
);
966 falcon_remove_nic(efx
);
969 /**************************************************************************
971 * NIC startup/shutdown
973 *************************************************************************/
975 static int efx_probe_all(struct efx_nic
*efx
)
977 struct efx_channel
*channel
;
981 rc
= efx_probe_nic(efx
);
983 EFX_ERR(efx
, "failed to create NIC\n");
988 rc
= efx_probe_port(efx
);
990 EFX_ERR(efx
, "failed to create port\n");
994 /* Create channels */
995 efx_for_each_channel(channel
, efx
) {
996 rc
= efx_probe_channel(channel
);
998 EFX_ERR(efx
, "failed to create channel %d\n",
1007 efx_for_each_channel(channel
, efx
)
1008 efx_remove_channel(channel
);
1009 efx_remove_port(efx
);
1011 efx_remove_nic(efx
);
1016 /* Called after previous invocation(s) of efx_stop_all, restarts the
1017 * port, kernel transmit queue, NAPI processing and hardware interrupts,
1018 * and ensures that the port is scheduled to be reconfigured.
1019 * This function is safe to call multiple times when the NIC is in any
1021 static void efx_start_all(struct efx_nic
*efx
)
1023 struct efx_channel
*channel
;
1025 EFX_ASSERT_RESET_SERIALISED(efx
);
1027 /* Check that it is appropriate to restart the interface. All
1028 * of these flags are safe to read under just the rtnl lock */
1029 if (efx
->port_enabled
)
1031 if ((efx
->state
!= STATE_RUNNING
) && (efx
->state
!= STATE_INIT
))
1033 if (efx_dev_registered(efx
) && !netif_running(efx
->net_dev
))
1036 /* Mark the port as enabled so port reconfigurations can start, then
1037 * restart the transmit interface early so the watchdog timer stops */
1038 efx_start_port(efx
);
1039 efx_wake_queue(efx
);
1041 efx_for_each_channel(channel
, efx
)
1042 efx_start_channel(channel
);
1044 falcon_enable_interrupts(efx
);
1046 /* Start hardware monitor if we're in RUNNING */
1047 if (efx
->state
== STATE_RUNNING
)
1048 queue_delayed_work(efx
->workqueue
, &efx
->monitor_work
,
1049 efx_monitor_interval
);
1052 /* Flush all delayed work. Should only be called when no more delayed work
1053 * will be scheduled. This doesn't flush pending online resets (efx_reset),
1054 * since we're holding the rtnl_lock at this point. */
1055 static void efx_flush_all(struct efx_nic
*efx
)
1057 struct efx_rx_queue
*rx_queue
;
1059 /* Make sure the hardware monitor is stopped */
1060 cancel_delayed_work_sync(&efx
->monitor_work
);
1062 /* Ensure that all RX slow refills are complete. */
1063 efx_for_each_rx_queue(rx_queue
, efx
)
1064 cancel_delayed_work_sync(&rx_queue
->work
);
1066 /* Stop scheduled port reconfigurations */
1067 cancel_work_sync(&efx
->reconfigure_work
);
1071 /* Quiesce hardware and software without bringing the link down.
1072 * Safe to call multiple times, when the nic and interface is in any
1073 * state. The caller is guaranteed to subsequently be in a position
1074 * to modify any hardware and software state they see fit without
1076 static void efx_stop_all(struct efx_nic
*efx
)
1078 struct efx_channel
*channel
;
1080 EFX_ASSERT_RESET_SERIALISED(efx
);
1082 /* port_enabled can be read safely under the rtnl lock */
1083 if (!efx
->port_enabled
)
1086 /* Disable interrupts and wait for ISR to complete */
1087 falcon_disable_interrupts(efx
);
1088 if (efx
->legacy_irq
)
1089 synchronize_irq(efx
->legacy_irq
);
1090 efx_for_each_channel_with_interrupt(channel
, efx
) {
1092 synchronize_irq(channel
->irq
);
1095 /* Stop all NAPI processing and synchronous rx refills */
1096 efx_for_each_channel(channel
, efx
)
1097 efx_stop_channel(channel
);
1099 /* Stop all asynchronous port reconfigurations. Since all
1100 * event processing has already been stopped, there is no
1101 * window to loose phy events */
1104 /* Flush reconfigure_work, refill_workqueue, monitor_work */
1107 /* Isolate the MAC from the TX and RX engines, so that queue
1108 * flushes will complete in a timely fashion. */
1109 falcon_deconfigure_mac_wrapper(efx
);
1110 falcon_drain_tx_fifo(efx
);
1112 /* Stop the kernel transmit interface late, so the watchdog
1113 * timer isn't ticking over the flush */
1114 efx_stop_queue(efx
);
1115 if (efx_dev_registered(efx
)) {
1116 netif_tx_lock_bh(efx
->net_dev
);
1117 netif_tx_unlock_bh(efx
->net_dev
);
1121 static void efx_remove_all(struct efx_nic
*efx
)
1123 struct efx_channel
*channel
;
1125 efx_for_each_channel(channel
, efx
)
1126 efx_remove_channel(channel
);
1127 efx_remove_port(efx
);
1128 efx_remove_nic(efx
);
1131 /* A convinience function to safely flush all the queues */
1132 int efx_flush_queues(struct efx_nic
*efx
)
1136 EFX_ASSERT_RESET_SERIALISED(efx
);
1140 efx_fini_channels(efx
);
1141 rc
= efx_init_channels(efx
);
1143 efx_schedule_reset(efx
, RESET_TYPE_DISABLE
);
1152 /**************************************************************************
1154 * Interrupt moderation
1156 **************************************************************************/
1158 /* Set interrupt moderation parameters */
1159 void efx_init_irq_moderation(struct efx_nic
*efx
, int tx_usecs
, int rx_usecs
)
1161 struct efx_tx_queue
*tx_queue
;
1162 struct efx_rx_queue
*rx_queue
;
1164 EFX_ASSERT_RESET_SERIALISED(efx
);
1166 efx_for_each_tx_queue(tx_queue
, efx
)
1167 tx_queue
->channel
->irq_moderation
= tx_usecs
;
1169 efx_for_each_rx_queue(rx_queue
, efx
)
1170 rx_queue
->channel
->irq_moderation
= rx_usecs
;
1173 /**************************************************************************
1177 **************************************************************************/
1179 /* Run periodically off the general workqueue. Serialised against
1180 * efx_reconfigure_port via the mac_lock */
1181 static void efx_monitor(struct work_struct
*data
)
1183 struct efx_nic
*efx
= container_of(data
, struct efx_nic
,
1187 EFX_TRACE(efx
, "hardware monitor executing on CPU %d\n",
1188 raw_smp_processor_id());
1191 /* If the mac_lock is already held then it is likely a port
1192 * reconfiguration is already in place, which will likely do
1193 * most of the work of check_hw() anyway. */
1194 if (!mutex_trylock(&efx
->mac_lock
)) {
1195 queue_delayed_work(efx
->workqueue
, &efx
->monitor_work
,
1196 efx_monitor_interval
);
1200 if (efx
->port_enabled
)
1201 rc
= falcon_check_xmac(efx
);
1202 mutex_unlock(&efx
->mac_lock
);
1205 if (monitor_reset
) {
1206 EFX_ERR(efx
, "hardware monitor detected a fault: "
1207 "triggering reset\n");
1208 efx_schedule_reset(efx
, RESET_TYPE_MONITOR
);
1210 EFX_ERR(efx
, "hardware monitor detected a fault, "
1211 "skipping reset\n");
1215 queue_delayed_work(efx
->workqueue
, &efx
->monitor_work
,
1216 efx_monitor_interval
);
1219 /**************************************************************************
1223 *************************************************************************/
1226 * Context: process, rtnl_lock() held.
1228 static int efx_ioctl(struct net_device
*net_dev
, struct ifreq
*ifr
, int cmd
)
1230 struct efx_nic
*efx
= net_dev
->priv
;
1232 EFX_ASSERT_RESET_SERIALISED(efx
);
1234 return generic_mii_ioctl(&efx
->mii
, if_mii(ifr
), cmd
, NULL
);
1237 /**************************************************************************
1241 **************************************************************************/
1243 static int efx_init_napi(struct efx_nic
*efx
)
1245 struct efx_channel
*channel
;
1248 efx_for_each_channel(channel
, efx
) {
1249 channel
->napi_dev
= efx
->net_dev
;
1250 rc
= efx_lro_init(&channel
->lro_mgr
, efx
);
1260 static void efx_fini_napi(struct efx_nic
*efx
)
1262 struct efx_channel
*channel
;
1264 efx_for_each_channel(channel
, efx
) {
1265 efx_lro_fini(&channel
->lro_mgr
);
1266 channel
->napi_dev
= NULL
;
1270 /**************************************************************************
1272 * Kernel netpoll interface
1274 *************************************************************************/
1276 #ifdef CONFIG_NET_POLL_CONTROLLER
1278 /* Although in the common case interrupts will be disabled, this is not
1279 * guaranteed. However, all our work happens inside the NAPI callback,
1280 * so no locking is required.
1282 static void efx_netpoll(struct net_device
*net_dev
)
1284 struct efx_nic
*efx
= net_dev
->priv
;
1285 struct efx_channel
*channel
;
1287 efx_for_each_channel_with_interrupt(channel
, efx
)
1288 efx_schedule_channel(channel
);
1293 /**************************************************************************
1295 * Kernel net device interface
1297 *************************************************************************/
1299 /* Context: process, rtnl_lock() held. */
1300 static int efx_net_open(struct net_device
*net_dev
)
1302 struct efx_nic
*efx
= net_dev
->priv
;
1303 EFX_ASSERT_RESET_SERIALISED(efx
);
1305 EFX_LOG(efx
, "opening device %s on CPU %d\n", net_dev
->name
,
1306 raw_smp_processor_id());
1312 /* Context: process, rtnl_lock() held.
1313 * Note that the kernel will ignore our return code; this method
1314 * should really be a void.
1316 static int efx_net_stop(struct net_device
*net_dev
)
1318 struct efx_nic
*efx
= net_dev
->priv
;
1321 EFX_LOG(efx
, "closing %s on CPU %d\n", net_dev
->name
,
1322 raw_smp_processor_id());
1324 /* Stop the device and flush all the channels */
1326 efx_fini_channels(efx
);
1327 rc
= efx_init_channels(efx
);
1329 efx_schedule_reset(efx
, RESET_TYPE_DISABLE
);
1334 /* Context: process, dev_base_lock held, non-blocking. */
1335 static struct net_device_stats
*efx_net_stats(struct net_device
*net_dev
)
1337 struct efx_nic
*efx
= net_dev
->priv
;
1338 struct efx_mac_stats
*mac_stats
= &efx
->mac_stats
;
1339 struct net_device_stats
*stats
= &net_dev
->stats
;
1341 if (!spin_trylock(&efx
->stats_lock
))
1343 if (efx
->state
== STATE_RUNNING
) {
1344 falcon_update_stats_xmac(efx
);
1345 falcon_update_nic_stats(efx
);
1347 spin_unlock(&efx
->stats_lock
);
1349 stats
->rx_packets
= mac_stats
->rx_packets
;
1350 stats
->tx_packets
= mac_stats
->tx_packets
;
1351 stats
->rx_bytes
= mac_stats
->rx_bytes
;
1352 stats
->tx_bytes
= mac_stats
->tx_bytes
;
1353 stats
->multicast
= mac_stats
->rx_multicast
;
1354 stats
->collisions
= mac_stats
->tx_collision
;
1355 stats
->rx_length_errors
= (mac_stats
->rx_gtjumbo
+
1356 mac_stats
->rx_length_error
);
1357 stats
->rx_over_errors
= efx
->n_rx_nodesc_drop_cnt
;
1358 stats
->rx_crc_errors
= mac_stats
->rx_bad
;
1359 stats
->rx_frame_errors
= mac_stats
->rx_align_error
;
1360 stats
->rx_fifo_errors
= mac_stats
->rx_overflow
;
1361 stats
->rx_missed_errors
= mac_stats
->rx_missed
;
1362 stats
->tx_window_errors
= mac_stats
->tx_late_collision
;
1364 stats
->rx_errors
= (stats
->rx_length_errors
+
1365 stats
->rx_over_errors
+
1366 stats
->rx_crc_errors
+
1367 stats
->rx_frame_errors
+
1368 stats
->rx_fifo_errors
+
1369 stats
->rx_missed_errors
+
1370 mac_stats
->rx_symbol_error
);
1371 stats
->tx_errors
= (stats
->tx_window_errors
+
1377 /* Context: netif_tx_lock held, BHs disabled. */
1378 static void efx_watchdog(struct net_device
*net_dev
)
1380 struct efx_nic
*efx
= net_dev
->priv
;
1382 EFX_ERR(efx
, "TX stuck with stop_count=%d port_enabled=%d: %s\n",
1383 atomic_read(&efx
->netif_stop_count
), efx
->port_enabled
,
1384 monitor_reset
? "resetting channels" : "skipping reset");
1387 efx_schedule_reset(efx
, RESET_TYPE_MONITOR
);
1391 /* Context: process, rtnl_lock() held. */
1392 static int efx_change_mtu(struct net_device
*net_dev
, int new_mtu
)
1394 struct efx_nic
*efx
= net_dev
->priv
;
1397 EFX_ASSERT_RESET_SERIALISED(efx
);
1399 if (new_mtu
> EFX_MAX_MTU
)
1404 EFX_LOG(efx
, "changing MTU to %d\n", new_mtu
);
1406 efx_fini_channels(efx
);
1407 net_dev
->mtu
= new_mtu
;
1408 rc
= efx_init_channels(efx
);
1416 efx_schedule_reset(efx
, RESET_TYPE_DISABLE
);
1420 static int efx_set_mac_address(struct net_device
*net_dev
, void *data
)
1422 struct efx_nic
*efx
= net_dev
->priv
;
1423 struct sockaddr
*addr
= data
;
1424 char *new_addr
= addr
->sa_data
;
1426 EFX_ASSERT_RESET_SERIALISED(efx
);
1428 if (!is_valid_ether_addr(new_addr
)) {
1429 DECLARE_MAC_BUF(mac
);
1430 EFX_ERR(efx
, "invalid ethernet MAC address requested: %s\n",
1431 print_mac(mac
, new_addr
));
1435 memcpy(net_dev
->dev_addr
, new_addr
, net_dev
->addr_len
);
1437 /* Reconfigure the MAC */
1438 efx_reconfigure_port(efx
);
1443 /* Context: netif_tx_lock held, BHs disabled. */
1444 static void efx_set_multicast_list(struct net_device
*net_dev
)
1446 struct efx_nic
*efx
= net_dev
->priv
;
1447 struct dev_mc_list
*mc_list
= net_dev
->mc_list
;
1448 union efx_multicast_hash
*mc_hash
= &efx
->multicast_hash
;
1454 /* Set per-MAC promiscuity flag and reconfigure MAC if necessary */
1455 promiscuous
= (net_dev
->flags
& IFF_PROMISC
) ? 1 : 0;
1456 if (efx
->promiscuous
!= promiscuous
) {
1457 efx
->promiscuous
= promiscuous
;
1458 /* Close the window between efx_stop_port() and efx_flush_all()
1459 * by only queuing work when the port is enabled. */
1460 if (efx
->port_enabled
)
1461 queue_work(efx
->workqueue
, &efx
->reconfigure_work
);
1464 /* Build multicast hash table */
1465 if (promiscuous
|| (net_dev
->flags
& IFF_ALLMULTI
)) {
1466 memset(mc_hash
, 0xff, sizeof(*mc_hash
));
1468 memset(mc_hash
, 0x00, sizeof(*mc_hash
));
1469 for (i
= 0; i
< net_dev
->mc_count
; i
++) {
1470 crc
= ether_crc_le(ETH_ALEN
, mc_list
->dmi_addr
);
1471 bit
= crc
& (EFX_MCAST_HASH_ENTRIES
- 1);
1472 set_bit_le(bit
, mc_hash
->byte
);
1473 mc_list
= mc_list
->next
;
1477 /* Create and activate new global multicast hash table */
1478 falcon_set_multicast_hash(efx
);
1481 static int efx_netdev_event(struct notifier_block
*this,
1482 unsigned long event
, void *ptr
)
1484 struct net_device
*net_dev
= (struct net_device
*)ptr
;
1486 if (net_dev
->open
== efx_net_open
&& event
== NETDEV_CHANGENAME
) {
1487 struct efx_nic
*efx
= net_dev
->priv
;
1489 strcpy(efx
->name
, net_dev
->name
);
1495 static struct notifier_block efx_netdev_notifier
= {
1496 .notifier_call
= efx_netdev_event
,
1499 static int efx_register_netdev(struct efx_nic
*efx
)
1501 struct net_device
*net_dev
= efx
->net_dev
;
1504 net_dev
->watchdog_timeo
= 5 * HZ
;
1505 net_dev
->irq
= efx
->pci_dev
->irq
;
1506 net_dev
->open
= efx_net_open
;
1507 net_dev
->stop
= efx_net_stop
;
1508 net_dev
->get_stats
= efx_net_stats
;
1509 net_dev
->tx_timeout
= &efx_watchdog
;
1510 net_dev
->hard_start_xmit
= efx_hard_start_xmit
;
1511 net_dev
->do_ioctl
= efx_ioctl
;
1512 net_dev
->change_mtu
= efx_change_mtu
;
1513 net_dev
->set_mac_address
= efx_set_mac_address
;
1514 net_dev
->set_multicast_list
= efx_set_multicast_list
;
1515 #ifdef CONFIG_NET_POLL_CONTROLLER
1516 net_dev
->poll_controller
= efx_netpoll
;
1518 SET_NETDEV_DEV(net_dev
, &efx
->pci_dev
->dev
);
1519 SET_ETHTOOL_OPS(net_dev
, &efx_ethtool_ops
);
1521 /* Always start with carrier off; PHY events will detect the link */
1522 netif_carrier_off(efx
->net_dev
);
1524 /* Clear MAC statistics */
1525 falcon_update_stats_xmac(efx
);
1526 memset(&efx
->mac_stats
, 0, sizeof(efx
->mac_stats
));
1528 rc
= register_netdev(net_dev
);
1530 EFX_ERR(efx
, "could not register net dev\n");
1533 strcpy(efx
->name
, net_dev
->name
);
1538 static void efx_unregister_netdev(struct efx_nic
*efx
)
1540 struct efx_tx_queue
*tx_queue
;
1545 BUG_ON(efx
->net_dev
->priv
!= efx
);
1547 /* Free up any skbs still remaining. This has to happen before
1548 * we try to unregister the netdev as running their destructors
1549 * may be needed to get the device ref. count to 0. */
1550 efx_for_each_tx_queue(tx_queue
, efx
)
1551 efx_release_tx_buffers(tx_queue
);
1553 if (efx_dev_registered(efx
)) {
1554 strlcpy(efx
->name
, pci_name(efx
->pci_dev
), sizeof(efx
->name
));
1555 unregister_netdev(efx
->net_dev
);
1559 /**************************************************************************
1561 * Device reset and suspend
1563 **************************************************************************/
1565 /* The final hardware and software finalisation before reset. */
1566 static int efx_reset_down(struct efx_nic
*efx
, struct ethtool_cmd
*ecmd
)
1570 EFX_ASSERT_RESET_SERIALISED(efx
);
1572 rc
= falcon_xmac_get_settings(efx
, ecmd
);
1574 EFX_ERR(efx
, "could not back up PHY settings\n");
1578 efx_fini_channels(efx
);
1585 /* The first part of software initialisation after a hardware reset
1586 * This function does not handle serialisation with the kernel, it
1587 * assumes the caller has done this */
1588 static int efx_reset_up(struct efx_nic
*efx
, struct ethtool_cmd
*ecmd
)
1592 rc
= efx_init_channels(efx
);
1596 /* Restore MAC and PHY settings. */
1597 rc
= falcon_xmac_set_settings(efx
, ecmd
);
1599 EFX_ERR(efx
, "could not restore PHY settings\n");
1606 efx_fini_channels(efx
);
1611 /* Reset the NIC as transparently as possible. Do not reset the PHY
1612 * Note that the reset may fail, in which case the card will be left
1613 * in a most-probably-unusable state.
1615 * This function will sleep. You cannot reset from within an atomic
1616 * state; use efx_schedule_reset() instead.
1618 * Grabs the rtnl_lock.
1620 static int efx_reset(struct efx_nic
*efx
)
1622 struct ethtool_cmd ecmd
;
1623 enum reset_type method
= efx
->reset_pending
;
1626 /* Serialise with kernel interfaces */
1629 /* If we're not RUNNING then don't reset. Leave the reset_pending
1630 * flag set so that efx_pci_probe_main will be retried */
1631 if (efx
->state
!= STATE_RUNNING
) {
1632 EFX_INFO(efx
, "scheduled reset quenched. NIC not RUNNING\n");
1636 efx
->state
= STATE_RESETTING
;
1637 EFX_INFO(efx
, "resetting (%d)\n", method
);
1639 /* The net_dev->get_stats handler is quite slow, and will fail
1640 * if a fetch is pending over reset. Serialise against it. */
1641 spin_lock(&efx
->stats_lock
);
1642 spin_unlock(&efx
->stats_lock
);
1645 mutex_lock(&efx
->mac_lock
);
1647 rc
= efx_reset_down(efx
, &ecmd
);
1651 rc
= falcon_reset_hw(efx
, method
);
1653 EFX_ERR(efx
, "failed to reset hardware\n");
1657 /* Allow resets to be rescheduled. */
1658 efx
->reset_pending
= RESET_TYPE_NONE
;
1660 /* Reinitialise bus-mastering, which may have been turned off before
1661 * the reset was scheduled. This is still appropriate, even in the
1662 * RESET_TYPE_DISABLE since this driver generally assumes the hardware
1663 * can respond to requests. */
1664 pci_set_master(efx
->pci_dev
);
1666 /* Reinitialise device. This is appropriate in the RESET_TYPE_DISABLE
1667 * case so the driver can talk to external SRAM */
1668 rc
= falcon_init_nic(efx
);
1670 EFX_ERR(efx
, "failed to initialise NIC\n");
1674 /* Leave device stopped if necessary */
1675 if (method
== RESET_TYPE_DISABLE
) {
1676 /* Reinitialise the device anyway so the driver unload sequence
1677 * can talk to the external SRAM */
1678 falcon_init_nic(efx
);
1683 rc
= efx_reset_up(efx
, &ecmd
);
1687 mutex_unlock(&efx
->mac_lock
);
1688 EFX_LOG(efx
, "reset complete\n");
1690 efx
->state
= STATE_RUNNING
;
1702 EFX_ERR(efx
, "has been disabled\n");
1703 efx
->state
= STATE_DISABLED
;
1705 mutex_unlock(&efx
->mac_lock
);
1707 efx_unregister_netdev(efx
);
1712 /* The worker thread exists so that code that cannot sleep can
1713 * schedule a reset for later.
1715 static void efx_reset_work(struct work_struct
*data
)
1717 struct efx_nic
*nic
= container_of(data
, struct efx_nic
, reset_work
);
1722 void efx_schedule_reset(struct efx_nic
*efx
, enum reset_type type
)
1724 enum reset_type method
;
1726 if (efx
->reset_pending
!= RESET_TYPE_NONE
) {
1727 EFX_INFO(efx
, "quenching already scheduled reset\n");
1732 case RESET_TYPE_INVISIBLE
:
1733 case RESET_TYPE_ALL
:
1734 case RESET_TYPE_WORLD
:
1735 case RESET_TYPE_DISABLE
:
1738 case RESET_TYPE_RX_RECOVERY
:
1739 case RESET_TYPE_RX_DESC_FETCH
:
1740 case RESET_TYPE_TX_DESC_FETCH
:
1741 case RESET_TYPE_TX_SKIP
:
1742 method
= RESET_TYPE_INVISIBLE
;
1745 method
= RESET_TYPE_ALL
;
1750 EFX_LOG(efx
, "scheduling reset (%d:%d)\n", type
, method
);
1752 EFX_LOG(efx
, "scheduling reset (%d)\n", method
);
1754 efx
->reset_pending
= method
;
1756 queue_work(efx
->workqueue
, &efx
->reset_work
);
1759 /**************************************************************************
1761 * List of NICs we support
1763 **************************************************************************/
1765 /* PCI device ID table */
1766 static struct pci_device_id efx_pci_table
[] __devinitdata
= {
1767 {PCI_DEVICE(EFX_VENDID_SFC
, FALCON_A_P_DEVID
),
1768 .driver_data
= (unsigned long) &falcon_a_nic_type
},
1769 {PCI_DEVICE(EFX_VENDID_SFC
, FALCON_B_P_DEVID
),
1770 .driver_data
= (unsigned long) &falcon_b_nic_type
},
1771 {0} /* end of list */
1774 /**************************************************************************
1776 * Dummy PHY/MAC/Board operations
1778 * Can be used where the MAC does not implement this operation
1779 * Needed so all function pointers are valid and do not have to be tested
1782 **************************************************************************/
1783 int efx_port_dummy_op_int(struct efx_nic
*efx
)
1787 void efx_port_dummy_op_void(struct efx_nic
*efx
) {}
1788 void efx_port_dummy_op_blink(struct efx_nic
*efx
, int blink
) {}
1790 static struct efx_phy_operations efx_dummy_phy_operations
= {
1791 .init
= efx_port_dummy_op_int
,
1792 .reconfigure
= efx_port_dummy_op_void
,
1793 .check_hw
= efx_port_dummy_op_int
,
1794 .fini
= efx_port_dummy_op_void
,
1795 .clear_interrupt
= efx_port_dummy_op_void
,
1796 .reset_xaui
= efx_port_dummy_op_void
,
1799 /* Dummy board operations */
1800 static int efx_nic_dummy_op_int(struct efx_nic
*nic
)
1805 static struct efx_board efx_dummy_board_info
= {
1806 .init
= efx_nic_dummy_op_int
,
1807 .init_leds
= efx_port_dummy_op_int
,
1808 .set_fault_led
= efx_port_dummy_op_blink
,
1811 /**************************************************************************
1815 **************************************************************************/
1817 /* This zeroes out and then fills in the invariants in a struct
1818 * efx_nic (including all sub-structures).
1820 static int efx_init_struct(struct efx_nic
*efx
, struct efx_nic_type
*type
,
1821 struct pci_dev
*pci_dev
, struct net_device
*net_dev
)
1823 struct efx_channel
*channel
;
1824 struct efx_tx_queue
*tx_queue
;
1825 struct efx_rx_queue
*rx_queue
;
1828 /* Initialise common structures */
1829 memset(efx
, 0, sizeof(*efx
));
1830 spin_lock_init(&efx
->biu_lock
);
1831 spin_lock_init(&efx
->phy_lock
);
1832 INIT_WORK(&efx
->reset_work
, efx_reset_work
);
1833 INIT_DELAYED_WORK(&efx
->monitor_work
, efx_monitor
);
1834 efx
->pci_dev
= pci_dev
;
1835 efx
->state
= STATE_INIT
;
1836 efx
->reset_pending
= RESET_TYPE_NONE
;
1837 strlcpy(efx
->name
, pci_name(pci_dev
), sizeof(efx
->name
));
1838 efx
->board_info
= efx_dummy_board_info
;
1840 efx
->net_dev
= net_dev
;
1841 efx
->rx_checksum_enabled
= 1;
1842 spin_lock_init(&efx
->netif_stop_lock
);
1843 spin_lock_init(&efx
->stats_lock
);
1844 mutex_init(&efx
->mac_lock
);
1845 efx
->phy_op
= &efx_dummy_phy_operations
;
1846 efx
->mii
.dev
= net_dev
;
1847 INIT_WORK(&efx
->reconfigure_work
, efx_reconfigure_work
);
1848 atomic_set(&efx
->netif_stop_count
, 1);
1850 for (i
= 0; i
< EFX_MAX_CHANNELS
; i
++) {
1851 channel
= &efx
->channel
[i
];
1853 channel
->channel
= i
;
1854 channel
->evqnum
= i
;
1855 channel
->work_pending
= 0;
1857 for (i
= 0; i
< EFX_MAX_TX_QUEUES
; i
++) {
1858 tx_queue
= &efx
->tx_queue
[i
];
1859 tx_queue
->efx
= efx
;
1860 tx_queue
->queue
= i
;
1861 tx_queue
->buffer
= NULL
;
1862 tx_queue
->channel
= &efx
->channel
[0]; /* for safety */
1863 tx_queue
->tso_headers_free
= NULL
;
1865 for (i
= 0; i
< EFX_MAX_RX_QUEUES
; i
++) {
1866 rx_queue
= &efx
->rx_queue
[i
];
1867 rx_queue
->efx
= efx
;
1868 rx_queue
->queue
= i
;
1869 rx_queue
->channel
= &efx
->channel
[0]; /* for safety */
1870 rx_queue
->buffer
= NULL
;
1871 spin_lock_init(&rx_queue
->add_lock
);
1872 INIT_DELAYED_WORK(&rx_queue
->work
, efx_rx_work
);
1877 /* Sanity-check NIC type */
1878 EFX_BUG_ON_PARANOID(efx
->type
->txd_ring_mask
&
1879 (efx
->type
->txd_ring_mask
+ 1));
1880 EFX_BUG_ON_PARANOID(efx
->type
->rxd_ring_mask
&
1881 (efx
->type
->rxd_ring_mask
+ 1));
1882 EFX_BUG_ON_PARANOID(efx
->type
->evq_size
&
1883 (efx
->type
->evq_size
- 1));
1884 /* As close as we can get to guaranteeing that we don't overflow */
1885 EFX_BUG_ON_PARANOID(efx
->type
->evq_size
<
1886 (efx
->type
->txd_ring_mask
+ 1 +
1887 efx
->type
->rxd_ring_mask
+ 1));
1888 EFX_BUG_ON_PARANOID(efx
->type
->phys_addr_channels
> EFX_MAX_CHANNELS
);
1890 /* Higher numbered interrupt modes are less capable! */
1891 efx
->interrupt_mode
= max(efx
->type
->max_interrupt_mode
,
1894 efx
->workqueue
= create_singlethread_workqueue("sfc_work");
1895 if (!efx
->workqueue
) {
1906 static void efx_fini_struct(struct efx_nic
*efx
)
1908 if (efx
->workqueue
) {
1909 destroy_workqueue(efx
->workqueue
);
1910 efx
->workqueue
= NULL
;
1914 /**************************************************************************
1918 **************************************************************************/
1920 /* Main body of final NIC shutdown code
1921 * This is called only at module unload (or hotplug removal).
1923 static void efx_pci_remove_main(struct efx_nic
*efx
)
1925 EFX_ASSERT_RESET_SERIALISED(efx
);
1927 /* Skip everything if we never obtained a valid membase */
1931 efx_fini_channels(efx
);
1934 /* Shutdown the board, then the NIC and board state */
1935 falcon_fini_interrupt(efx
);
1938 efx_remove_all(efx
);
1941 /* Final NIC shutdown
1942 * This is called only at module unload (or hotplug removal).
1944 static void efx_pci_remove(struct pci_dev
*pci_dev
)
1946 struct efx_nic
*efx
;
1948 efx
= pci_get_drvdata(pci_dev
);
1952 /* Mark the NIC as fini, then stop the interface */
1954 efx
->state
= STATE_FINI
;
1955 dev_close(efx
->net_dev
);
1957 /* Allow any queued efx_resets() to complete */
1960 if (efx
->membase
== NULL
)
1963 efx_unregister_netdev(efx
);
1965 /* Wait for any scheduled resets to complete. No more will be
1966 * scheduled from this point because efx_stop_all() has been
1967 * called, we are no longer registered with driverlink, and
1968 * the net_device's have been removed. */
1969 flush_workqueue(efx
->workqueue
);
1971 efx_pci_remove_main(efx
);
1975 EFX_LOG(efx
, "shutdown successful\n");
1977 pci_set_drvdata(pci_dev
, NULL
);
1978 efx_fini_struct(efx
);
1979 free_netdev(efx
->net_dev
);
1982 /* Main body of NIC initialisation
1983 * This is called at module load (or hotplug insertion, theoretically).
1985 static int efx_pci_probe_main(struct efx_nic
*efx
)
1989 /* Do start-of-day initialisation */
1990 rc
= efx_probe_all(efx
);
1994 rc
= efx_init_napi(efx
);
1998 /* Initialise the board */
1999 rc
= efx
->board_info
.init(efx
);
2001 EFX_ERR(efx
, "failed to initialise board\n");
2005 rc
= falcon_init_nic(efx
);
2007 EFX_ERR(efx
, "failed to initialise NIC\n");
2011 rc
= efx_init_port(efx
);
2013 EFX_ERR(efx
, "failed to initialise port\n");
2017 rc
= efx_init_channels(efx
);
2021 rc
= falcon_init_interrupt(efx
);
2028 efx_fini_channels(efx
);
2036 efx_remove_all(efx
);
2041 /* NIC initialisation
2043 * This is called at module load (or hotplug insertion,
2044 * theoretically). It sets up PCI mappings, tests and resets the NIC,
2045 * sets up and registers the network devices with the kernel and hooks
2046 * the interrupt service routine. It does not prepare the device for
2047 * transmission; this is left to the first time one of the network
2048 * interfaces is brought up (i.e. efx_net_open).
2050 static int __devinit
efx_pci_probe(struct pci_dev
*pci_dev
,
2051 const struct pci_device_id
*entry
)
2053 struct efx_nic_type
*type
= (struct efx_nic_type
*) entry
->driver_data
;
2054 struct net_device
*net_dev
;
2055 struct efx_nic
*efx
;
2058 /* Allocate and initialise a struct net_device and struct efx_nic */
2059 net_dev
= alloc_etherdev(sizeof(*efx
));
2062 net_dev
->features
|= (NETIF_F_IP_CSUM
| NETIF_F_SG
|
2063 NETIF_F_HIGHDMA
| NETIF_F_TSO
);
2065 net_dev
->features
|= NETIF_F_LRO
;
2066 efx
= net_dev
->priv
;
2067 pci_set_drvdata(pci_dev
, efx
);
2068 rc
= efx_init_struct(efx
, type
, pci_dev
, net_dev
);
2072 EFX_INFO(efx
, "Solarflare Communications NIC detected\n");
2074 /* Set up basic I/O (BAR mappings etc) */
2075 rc
= efx_init_io(efx
);
2079 /* No serialisation is required with the reset path because
2080 * we're in STATE_INIT. */
2081 for (i
= 0; i
< 5; i
++) {
2082 rc
= efx_pci_probe_main(efx
);
2086 /* Serialise against efx_reset(). No more resets will be
2087 * scheduled since efx_stop_all() has been called, and we
2088 * have not and never have been registered with either
2089 * the rtnetlink or driverlink layers. */
2090 cancel_work_sync(&efx
->reset_work
);
2092 /* Retry if a recoverably reset event has been scheduled */
2093 if ((efx
->reset_pending
!= RESET_TYPE_INVISIBLE
) &&
2094 (efx
->reset_pending
!= RESET_TYPE_ALL
))
2097 efx
->reset_pending
= RESET_TYPE_NONE
;
2101 EFX_ERR(efx
, "Could not reset NIC\n");
2105 /* Switch to the running state before we expose the device to
2106 * the OS. This is to ensure that the initial gathering of
2107 * MAC stats succeeds. */
2109 efx
->state
= STATE_RUNNING
;
2112 rc
= efx_register_netdev(efx
);
2116 EFX_LOG(efx
, "initialisation successful\n");
2121 efx_pci_remove_main(efx
);
2126 efx_fini_struct(efx
);
2128 EFX_LOG(efx
, "initialisation failed. rc=%d\n", rc
);
2129 free_netdev(net_dev
);
2133 static struct pci_driver efx_pci_driver
= {
2134 .name
= EFX_DRIVER_NAME
,
2135 .id_table
= efx_pci_table
,
2136 .probe
= efx_pci_probe
,
2137 .remove
= efx_pci_remove
,
2140 /**************************************************************************
2142 * Kernel module interface
2144 *************************************************************************/
2146 module_param(interrupt_mode
, uint
, 0444);
2147 MODULE_PARM_DESC(interrupt_mode
,
2148 "Interrupt mode (0=>MSIX 1=>MSI 2=>legacy)");
2150 static int __init
efx_init_module(void)
2154 printk(KERN_INFO
"Solarflare NET driver v" EFX_DRIVER_VERSION
"\n");
2156 rc
= register_netdevice_notifier(&efx_netdev_notifier
);
2160 refill_workqueue
= create_workqueue("sfc_refill");
2161 if (!refill_workqueue
) {
2166 rc
= pci_register_driver(&efx_pci_driver
);
2173 destroy_workqueue(refill_workqueue
);
2175 unregister_netdevice_notifier(&efx_netdev_notifier
);
2180 static void __exit
efx_exit_module(void)
2182 printk(KERN_INFO
"Solarflare NET driver unloading\n");
2184 pci_unregister_driver(&efx_pci_driver
);
2185 destroy_workqueue(refill_workqueue
);
2186 unregister_netdevice_notifier(&efx_netdev_notifier
);
2190 module_init(efx_init_module
);
2191 module_exit(efx_exit_module
);
2193 MODULE_AUTHOR("Michael Brown <mbrown@fensystems.co.uk> and "
2194 "Solarflare Communications");
2195 MODULE_DESCRIPTION("Solarflare Communications network driver");
2196 MODULE_LICENSE("GPL");
2197 MODULE_DEVICE_TABLE(pci
, efx_pci_table
);