2ea126a16d79add1f5271e8848942ffc2a755b37
[deliverable/linux.git] / drivers / net / usb / qmi_wwan.c
1 /*
2 * Copyright (c) 2012 Bjørn Mork <bjorn@mork.no>
3 *
4 * The probing code is heavily inspired by cdc_ether, which is:
5 * Copyright (C) 2003-2005 by David Brownell
6 * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License
10 * version 2 as published by the Free Software Foundation.
11 */
12
13 #include <linux/module.h>
14 #include <linux/netdevice.h>
15 #include <linux/ethtool.h>
16 #include <linux/mii.h>
17 #include <linux/usb.h>
18 #include <linux/usb/cdc.h>
19 #include <linux/usb/usbnet.h>
20 #include <linux/usb/cdc-wdm.h>
21
22 /* This driver supports wwan (3G/LTE/?) devices using a vendor
23 * specific management protocol called Qualcomm MSM Interface (QMI) -
24 * in addition to the more common AT commands over serial interface
25 * management
26 *
27 * QMI is wrapped in CDC, using CDC encapsulated commands on the
28 * control ("master") interface of a two-interface CDC Union
29 * resembling standard CDC ECM. The devices do not use the control
30 * interface for any other CDC messages. Most likely because the
31 * management protocol is used in place of the standard CDC
32 * notifications NOTIFY_NETWORK_CONNECTION and NOTIFY_SPEED_CHANGE
33 *
34 * Alternatively, control and data functions can be combined in a
35 * single USB interface.
36 *
37 * Handling a protocol like QMI is out of the scope for any driver.
38 * It is exported as a character device using the cdc-wdm driver as
39 * a subdriver, enabling userspace applications ("modem managers") to
40 * handle it.
41 *
42 * These devices may alternatively/additionally be configured using AT
43 * commands on a serial interface
44 */
45
46 /* driver specific data */
47 struct qmi_wwan_state {
48 struct usb_driver *subdriver;
49 atomic_t pmcount;
50 unsigned long unused;
51 struct usb_interface *control;
52 struct usb_interface *data;
53 };
54
55 /* using a counter to merge subdriver requests with our own into a combined state */
56 static int qmi_wwan_manage_power(struct usbnet *dev, int on)
57 {
58 struct qmi_wwan_state *info = (void *)&dev->data;
59 int rv = 0;
60
61 dev_dbg(&dev->intf->dev, "%s() pmcount=%d, on=%d\n", __func__, atomic_read(&info->pmcount), on);
62
63 if ((on && atomic_add_return(1, &info->pmcount) == 1) || (!on && atomic_dec_and_test(&info->pmcount))) {
64 /* need autopm_get/put here to ensure the usbcore sees the new value */
65 rv = usb_autopm_get_interface(dev->intf);
66 if (rv < 0)
67 goto err;
68 dev->intf->needs_remote_wakeup = on;
69 usb_autopm_put_interface(dev->intf);
70 }
71 err:
72 return rv;
73 }
74
75 static int qmi_wwan_cdc_wdm_manage_power(struct usb_interface *intf, int on)
76 {
77 struct usbnet *dev = usb_get_intfdata(intf);
78
79 /* can be called while disconnecting */
80 if (!dev)
81 return 0;
82 return qmi_wwan_manage_power(dev, on);
83 }
84
85 /* collect all three endpoints and register subdriver */
86 static int qmi_wwan_register_subdriver(struct usbnet *dev)
87 {
88 int rv;
89 struct usb_driver *subdriver = NULL;
90 struct qmi_wwan_state *info = (void *)&dev->data;
91
92 /* collect bulk endpoints */
93 rv = usbnet_get_endpoints(dev, info->data);
94 if (rv < 0)
95 goto err;
96
97 /* update status endpoint if separate control interface */
98 if (info->control != info->data)
99 dev->status = &info->control->cur_altsetting->endpoint[0];
100
101 /* require interrupt endpoint for subdriver */
102 if (!dev->status) {
103 rv = -EINVAL;
104 goto err;
105 }
106
107 /* for subdriver power management */
108 atomic_set(&info->pmcount, 0);
109
110 /* register subdriver */
111 subdriver = usb_cdc_wdm_register(info->control, &dev->status->desc, 512, &qmi_wwan_cdc_wdm_manage_power);
112 if (IS_ERR(subdriver)) {
113 dev_err(&info->control->dev, "subdriver registration failed\n");
114 rv = PTR_ERR(subdriver);
115 goto err;
116 }
117
118 /* prevent usbnet from using status endpoint */
119 dev->status = NULL;
120
121 /* save subdriver struct for suspend/resume wrappers */
122 info->subdriver = subdriver;
123
124 err:
125 return rv;
126 }
127
128 static int qmi_wwan_bind(struct usbnet *dev, struct usb_interface *intf)
129 {
130 int status = -1;
131 u8 *buf = intf->cur_altsetting->extra;
132 int len = intf->cur_altsetting->extralen;
133 struct usb_interface_descriptor *desc = &intf->cur_altsetting->desc;
134 struct usb_cdc_union_desc *cdc_union = NULL;
135 struct usb_cdc_ether_desc *cdc_ether = NULL;
136 u32 found = 0;
137 struct usb_driver *driver = driver_of(intf);
138 struct qmi_wwan_state *info = (void *)&dev->data;
139
140 BUILD_BUG_ON((sizeof(((struct usbnet *)0)->data) < sizeof(struct qmi_wwan_state)));
141
142 /* require a single interrupt status endpoint for subdriver */
143 if (intf->cur_altsetting->desc.bNumEndpoints != 1)
144 goto err;
145
146 while (len > 3) {
147 struct usb_descriptor_header *h = (void *)buf;
148
149 /* ignore any misplaced descriptors */
150 if (h->bDescriptorType != USB_DT_CS_INTERFACE)
151 goto next_desc;
152
153 /* buf[2] is CDC descriptor subtype */
154 switch (buf[2]) {
155 case USB_CDC_HEADER_TYPE:
156 if (found & 1 << USB_CDC_HEADER_TYPE) {
157 dev_dbg(&intf->dev, "extra CDC header\n");
158 goto err;
159 }
160 if (h->bLength != sizeof(struct usb_cdc_header_desc)) {
161 dev_dbg(&intf->dev, "CDC header len %u\n", h->bLength);
162 goto err;
163 }
164 break;
165 case USB_CDC_UNION_TYPE:
166 if (found & 1 << USB_CDC_UNION_TYPE) {
167 dev_dbg(&intf->dev, "extra CDC union\n");
168 goto err;
169 }
170 if (h->bLength != sizeof(struct usb_cdc_union_desc)) {
171 dev_dbg(&intf->dev, "CDC union len %u\n", h->bLength);
172 goto err;
173 }
174 cdc_union = (struct usb_cdc_union_desc *)buf;
175 break;
176 case USB_CDC_ETHERNET_TYPE:
177 if (found & 1 << USB_CDC_ETHERNET_TYPE) {
178 dev_dbg(&intf->dev, "extra CDC ether\n");
179 goto err;
180 }
181 if (h->bLength != sizeof(struct usb_cdc_ether_desc)) {
182 dev_dbg(&intf->dev, "CDC ether len %u\n", h->bLength);
183 goto err;
184 }
185 cdc_ether = (struct usb_cdc_ether_desc *)buf;
186 break;
187 }
188
189 /*
190 * Remember which CDC functional descriptors we've seen. Works
191 * for all types we care about, of which USB_CDC_ETHERNET_TYPE
192 * (0x0f) is the highest numbered
193 */
194 if (buf[2] < 32)
195 found |= 1 << buf[2];
196
197 next_desc:
198 len -= h->bLength;
199 buf += h->bLength;
200 }
201
202 /* did we find all the required ones? */
203 if (!(found & (1 << USB_CDC_HEADER_TYPE)) ||
204 !(found & (1 << USB_CDC_UNION_TYPE))) {
205 dev_err(&intf->dev, "CDC functional descriptors missing\n");
206 goto err;
207 }
208
209 /* verify CDC Union */
210 if (desc->bInterfaceNumber != cdc_union->bMasterInterface0) {
211 dev_err(&intf->dev, "bogus CDC Union: master=%u\n", cdc_union->bMasterInterface0);
212 goto err;
213 }
214
215 /* need to save these for unbind */
216 info->control = intf;
217 info->data = usb_ifnum_to_if(dev->udev, cdc_union->bSlaveInterface0);
218 if (!info->data) {
219 dev_err(&intf->dev, "bogus CDC Union: slave=%u\n", cdc_union->bSlaveInterface0);
220 goto err;
221 }
222
223 /* errors aren't fatal - we can live with the dynamic address */
224 if (cdc_ether) {
225 dev->hard_mtu = le16_to_cpu(cdc_ether->wMaxSegmentSize);
226 usbnet_get_ethernet_addr(dev, cdc_ether->iMACAddress);
227 }
228
229 /* claim data interface and set it up */
230 status = usb_driver_claim_interface(driver, info->data, dev);
231 if (status < 0)
232 goto err;
233
234 status = qmi_wwan_register_subdriver(dev);
235 if (status < 0) {
236 usb_set_intfdata(info->data, NULL);
237 usb_driver_release_interface(driver, info->data);
238 }
239
240 err:
241 return status;
242 }
243
244 /* Some devices combine the "control" and "data" functions into a
245 * single interface with all three endpoints: interrupt + bulk in and
246 * out
247 */
248 static int qmi_wwan_bind_shared(struct usbnet *dev, struct usb_interface *intf)
249 {
250 int rv;
251 struct qmi_wwan_state *info = (void *)&dev->data;
252
253 /* ZTE makes devices where the interface descriptors and endpoint
254 * configurations of two or more interfaces are identical, even
255 * though the functions are completely different. If set, then
256 * driver_info->data is a bitmap of acceptable interface numbers
257 * allowing us to bind to one such interface without binding to
258 * all of them
259 */
260 if (dev->driver_info->data &&
261 !test_bit(intf->cur_altsetting->desc.bInterfaceNumber, &dev->driver_info->data)) {
262 dev_info(&intf->dev, "not on our whitelist - ignored");
263 rv = -ENODEV;
264 goto err;
265 }
266
267 /* control and data is shared */
268 info->control = intf;
269 info->data = intf;
270 rv = qmi_wwan_register_subdriver(dev);
271
272 err:
273 return rv;
274 }
275
276 static void qmi_wwan_unbind(struct usbnet *dev, struct usb_interface *intf)
277 {
278 struct qmi_wwan_state *info = (void *)&dev->data;
279 struct usb_driver *driver = driver_of(intf);
280 struct usb_interface *other;
281
282 if (info->subdriver && info->subdriver->disconnect)
283 info->subdriver->disconnect(info->control);
284
285 /* allow user to unbind using either control or data */
286 if (intf == info->control)
287 other = info->data;
288 else
289 other = info->control;
290
291 /* only if not shared */
292 if (other && intf != other) {
293 usb_set_intfdata(other, NULL);
294 usb_driver_release_interface(driver, other);
295 }
296
297 info->subdriver = NULL;
298 info->data = NULL;
299 info->control = NULL;
300 }
301
302 /* suspend/resume wrappers calling both usbnet and the cdc-wdm
303 * subdriver if present.
304 *
305 * NOTE: cdc-wdm also supports pre/post_reset, but we cannot provide
306 * wrappers for those without adding usbnet reset support first.
307 */
308 static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message)
309 {
310 struct usbnet *dev = usb_get_intfdata(intf);
311 struct qmi_wwan_state *info = (void *)&dev->data;
312 int ret;
313
314 ret = usbnet_suspend(intf, message);
315 if (ret < 0)
316 goto err;
317
318 if (info->subdriver && info->subdriver->suspend)
319 ret = info->subdriver->suspend(intf, message);
320 if (ret < 0)
321 usbnet_resume(intf);
322 err:
323 return ret;
324 }
325
326 static int qmi_wwan_resume(struct usb_interface *intf)
327 {
328 struct usbnet *dev = usb_get_intfdata(intf);
329 struct qmi_wwan_state *info = (void *)&dev->data;
330 int ret = 0;
331
332 if (info->subdriver && info->subdriver->resume)
333 ret = info->subdriver->resume(intf);
334 if (ret < 0)
335 goto err;
336 ret = usbnet_resume(intf);
337 if (ret < 0 && info->subdriver && info->subdriver->resume && info->subdriver->suspend)
338 info->subdriver->suspend(intf, PMSG_SUSPEND);
339 err:
340 return ret;
341 }
342
343 static const struct driver_info qmi_wwan_info = {
344 .description = "WWAN/QMI device",
345 .flags = FLAG_WWAN,
346 .bind = qmi_wwan_bind,
347 .unbind = qmi_wwan_unbind,
348 .manage_power = qmi_wwan_manage_power,
349 };
350
351 static const struct driver_info qmi_wwan_shared = {
352 .description = "WWAN/QMI device",
353 .flags = FLAG_WWAN,
354 .bind = qmi_wwan_bind_shared,
355 .unbind = qmi_wwan_unbind,
356 .manage_power = qmi_wwan_manage_power,
357 };
358
359 static const struct driver_info qmi_wwan_force_int0 = {
360 .description = "Qualcomm WWAN/QMI device",
361 .flags = FLAG_WWAN,
362 .bind = qmi_wwan_bind_shared,
363 .unbind = qmi_wwan_unbind,
364 .manage_power = qmi_wwan_manage_power,
365 .data = BIT(0), /* interface whitelist bitmap */
366 };
367
368 static const struct driver_info qmi_wwan_force_int1 = {
369 .description = "Qualcomm WWAN/QMI device",
370 .flags = FLAG_WWAN,
371 .bind = qmi_wwan_bind_shared,
372 .unbind = qmi_wwan_unbind,
373 .manage_power = qmi_wwan_manage_power,
374 .data = BIT(1), /* interface whitelist bitmap */
375 };
376
377 static const struct driver_info qmi_wwan_force_int2 = {
378 .description = "Qualcomm WWAN/QMI device",
379 .flags = FLAG_WWAN,
380 .bind = qmi_wwan_bind_shared,
381 .unbind = qmi_wwan_unbind,
382 .manage_power = qmi_wwan_manage_power,
383 .data = BIT(2), /* interface whitelist bitmap */
384 };
385
386 static const struct driver_info qmi_wwan_force_int3 = {
387 .description = "Qualcomm WWAN/QMI device",
388 .flags = FLAG_WWAN,
389 .bind = qmi_wwan_bind_shared,
390 .unbind = qmi_wwan_unbind,
391 .manage_power = qmi_wwan_manage_power,
392 .data = BIT(3), /* interface whitelist bitmap */
393 };
394
395 static const struct driver_info qmi_wwan_force_int4 = {
396 .description = "Qualcomm WWAN/QMI device",
397 .flags = FLAG_WWAN,
398 .bind = qmi_wwan_bind_shared,
399 .unbind = qmi_wwan_unbind,
400 .manage_power = qmi_wwan_manage_power,
401 .data = BIT(4), /* interface whitelist bitmap */
402 };
403
404 /* Sierra Wireless provide equally useless interface descriptors
405 * Devices in QMI mode can be switched between two different
406 * configurations:
407 * a) USB interface #8 is QMI/wwan
408 * b) USB interfaces #8, #19 and #20 are QMI/wwan
409 *
410 * Both configurations provide a number of other interfaces (serial++),
411 * some of which have the same endpoint configuration as we expect, so
412 * a whitelist or blacklist is necessary.
413 *
414 * FIXME: The below whitelist should include BIT(20). It does not
415 * because I cannot get it to work...
416 */
417 static const struct driver_info qmi_wwan_sierra = {
418 .description = "Sierra Wireless wwan/QMI device",
419 .flags = FLAG_WWAN,
420 .bind = qmi_wwan_bind_shared,
421 .unbind = qmi_wwan_unbind,
422 .manage_power = qmi_wwan_manage_power,
423 .data = BIT(8) | BIT(19), /* interface whitelist bitmap */
424 };
425
426 #define HUAWEI_VENDOR_ID 0x12D1
427
428 /* Gobi 1000 QMI/wwan interface number is 3 according to qcserial */
429 #define QMI_GOBI1K_DEVICE(vend, prod) \
430 USB_DEVICE(vend, prod), \
431 .driver_info = (unsigned long)&qmi_wwan_force_int3
432
433 /* Gobi 2000 and Gobi 3000 QMI/wwan interface number is 0 according to qcserial */
434 #define QMI_GOBI_DEVICE(vend, prod) \
435 USB_DEVICE(vend, prod), \
436 .driver_info = (unsigned long)&qmi_wwan_force_int0
437
438 static const struct usb_device_id products[] = {
439 { /* Huawei E392, E398 and possibly others sharing both device id and more... */
440 .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
441 .idVendor = HUAWEI_VENDOR_ID,
442 .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
443 .bInterfaceSubClass = 1,
444 .bInterfaceProtocol = 9, /* CDC Ethernet *control* interface */
445 .driver_info = (unsigned long)&qmi_wwan_info,
446 },
447 { /* Vodafone/Huawei K5005 (12d1:14c8) and similar modems */
448 .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
449 .idVendor = HUAWEI_VENDOR_ID,
450 .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
451 .bInterfaceSubClass = 1,
452 .bInterfaceProtocol = 57, /* CDC Ethernet *control* interface */
453 .driver_info = (unsigned long)&qmi_wwan_info,
454 },
455 { /* Huawei E392, E398 and possibly others in "Windows mode"
456 * using a combined control and data interface without any CDC
457 * functional descriptors
458 */
459 .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO,
460 .idVendor = HUAWEI_VENDOR_ID,
461 .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
462 .bInterfaceSubClass = 1,
463 .bInterfaceProtocol = 17,
464 .driver_info = (unsigned long)&qmi_wwan_shared,
465 },
466 { /* Pantech UML290 */
467 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
468 .idVendor = 0x106c,
469 .idProduct = 0x3718,
470 .bInterfaceClass = 0xff,
471 .bInterfaceSubClass = 0xf0,
472 .bInterfaceProtocol = 0xff,
473 .driver_info = (unsigned long)&qmi_wwan_shared,
474 },
475 { /* ZTE MF820D */
476 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
477 .idVendor = 0x19d2,
478 .idProduct = 0x0167,
479 .bInterfaceClass = 0xff,
480 .bInterfaceSubClass = 0xff,
481 .bInterfaceProtocol = 0xff,
482 .driver_info = (unsigned long)&qmi_wwan_force_int4,
483 },
484 { /* ZTE MF821D */
485 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
486 .idVendor = 0x19d2,
487 .idProduct = 0x0326,
488 .bInterfaceClass = 0xff,
489 .bInterfaceSubClass = 0xff,
490 .bInterfaceProtocol = 0xff,
491 .driver_info = (unsigned long)&qmi_wwan_force_int4,
492 },
493 { /* ZTE (Vodafone) K3520-Z */
494 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
495 .idVendor = 0x19d2,
496 .idProduct = 0x0055,
497 .bInterfaceClass = 0xff,
498 .bInterfaceSubClass = 0xff,
499 .bInterfaceProtocol = 0xff,
500 .driver_info = (unsigned long)&qmi_wwan_force_int1,
501 },
502 { /* ZTE (Vodafone) K3565-Z */
503 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
504 .idVendor = 0x19d2,
505 .idProduct = 0x0063,
506 .bInterfaceClass = 0xff,
507 .bInterfaceSubClass = 0xff,
508 .bInterfaceProtocol = 0xff,
509 .driver_info = (unsigned long)&qmi_wwan_force_int4,
510 },
511 { /* ZTE (Vodafone) K3570-Z */
512 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
513 .idVendor = 0x19d2,
514 .idProduct = 0x1008,
515 .bInterfaceClass = 0xff,
516 .bInterfaceSubClass = 0xff,
517 .bInterfaceProtocol = 0xff,
518 .driver_info = (unsigned long)&qmi_wwan_force_int4,
519 },
520 { /* ZTE (Vodafone) K3571-Z */
521 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
522 .idVendor = 0x19d2,
523 .idProduct = 0x1010,
524 .bInterfaceClass = 0xff,
525 .bInterfaceSubClass = 0xff,
526 .bInterfaceProtocol = 0xff,
527 .driver_info = (unsigned long)&qmi_wwan_force_int4,
528 },
529 { /* ZTE (Vodafone) K3765-Z */
530 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
531 .idVendor = 0x19d2,
532 .idProduct = 0x2002,
533 .bInterfaceClass = 0xff,
534 .bInterfaceSubClass = 0xff,
535 .bInterfaceProtocol = 0xff,
536 .driver_info = (unsigned long)&qmi_wwan_force_int4,
537 },
538 { /* ZTE (Vodafone) K4505-Z */
539 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
540 .idVendor = 0x19d2,
541 .idProduct = 0x0104,
542 .bInterfaceClass = 0xff,
543 .bInterfaceSubClass = 0xff,
544 .bInterfaceProtocol = 0xff,
545 .driver_info = (unsigned long)&qmi_wwan_force_int4,
546 },
547 { /* ZTE MF60 */
548 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
549 .idVendor = 0x19d2,
550 .idProduct = 0x1402,
551 .bInterfaceClass = 0xff,
552 .bInterfaceSubClass = 0xff,
553 .bInterfaceProtocol = 0xff,
554 .driver_info = (unsigned long)&qmi_wwan_force_int2,
555 },
556 { /* Sierra Wireless MC77xx in QMI mode */
557 .match_flags = USB_DEVICE_ID_MATCH_DEVICE | USB_DEVICE_ID_MATCH_INT_INFO,
558 .idVendor = 0x1199,
559 .idProduct = 0x68a2,
560 .bInterfaceClass = 0xff,
561 .bInterfaceSubClass = 0xff,
562 .bInterfaceProtocol = 0xff,
563 .driver_info = (unsigned long)&qmi_wwan_sierra,
564 },
565
566 /* Gobi 1000 devices */
567 {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
568 {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
569 {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */
570 {QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
571 {QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
572 {QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
573 {QMI_GOBI1K_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
574 {QMI_GOBI1K_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
575 {QMI_GOBI1K_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
576 {QMI_GOBI1K_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
577 {QMI_GOBI1K_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
578 {QMI_GOBI1K_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
579 {QMI_GOBI1K_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
580 {QMI_GOBI1K_DEVICE(0x05c6, 0x9009)}, /* Generic Gobi Modem device */
581
582 /* Gobi 2000 and 3000 devices */
583 {QMI_GOBI_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */
584 {QMI_GOBI_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */
585 {QMI_GOBI_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */
586 {QMI_GOBI_DEVICE(0x05c6, 0x9245)}, /* Samsung Gobi 2000 Modem device (VL176) */
587 {QMI_GOBI_DEVICE(0x03f0, 0x251d)}, /* HP Gobi 2000 Modem device (VP412) */
588 {QMI_GOBI_DEVICE(0x05c6, 0x9215)}, /* Acer Gobi 2000 Modem device (VP413) */
589 {QMI_GOBI_DEVICE(0x05c6, 0x9265)}, /* Asus Gobi 2000 Modem device (VR305) */
590 {QMI_GOBI_DEVICE(0x05c6, 0x9235)}, /* Top Global Gobi 2000 Modem device (VR306) */
591 {QMI_GOBI_DEVICE(0x05c6, 0x9275)}, /* iRex Technologies Gobi 2000 Modem device (VR307) */
592 {QMI_GOBI_DEVICE(0x1199, 0x9001)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
593 {QMI_GOBI_DEVICE(0x1199, 0x9002)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
594 {QMI_GOBI_DEVICE(0x1199, 0x9003)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
595 {QMI_GOBI_DEVICE(0x1199, 0x9004)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
596 {QMI_GOBI_DEVICE(0x1199, 0x9005)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
597 {QMI_GOBI_DEVICE(0x1199, 0x9006)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
598 {QMI_GOBI_DEVICE(0x1199, 0x9007)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
599 {QMI_GOBI_DEVICE(0x1199, 0x9008)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
600 {QMI_GOBI_DEVICE(0x1199, 0x9009)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
601 {QMI_GOBI_DEVICE(0x1199, 0x900a)}, /* Sierra Wireless Gobi 2000 Modem device (VT773) */
602 {QMI_GOBI_DEVICE(0x1199, 0x9011)}, /* Sierra Wireless Gobi 2000 Modem device (MC8305) */
603 {QMI_GOBI_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */
604 {QMI_GOBI_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */
605 {QMI_GOBI_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */
606 {QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */
607 {QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */
608 { } /* END */
609 };
610 MODULE_DEVICE_TABLE(usb, products);
611
612 static int qmi_wwan_probe(struct usb_interface *intf, const struct usb_device_id *prod)
613 {
614 struct usb_device_id *id = (struct usb_device_id *)prod;
615
616 /* Workaround to enable dynamic IDs. This disables usbnet
617 * blacklisting functionality. Which, if required, can be
618 * reimplemented here by using a magic "blacklist" value
619 * instead of 0 in the static device id table
620 */
621 if (!id->driver_info) {
622 dev_dbg(&intf->dev, "setting defaults for dynamic device id\n");
623 id->driver_info = (unsigned long)&qmi_wwan_shared;
624 }
625
626 return usbnet_probe(intf, id);
627 }
628
629 static struct usb_driver qmi_wwan_driver = {
630 .name = "qmi_wwan",
631 .id_table = products,
632 .probe = qmi_wwan_probe,
633 .disconnect = usbnet_disconnect,
634 .suspend = qmi_wwan_suspend,
635 .resume = qmi_wwan_resume,
636 .reset_resume = qmi_wwan_resume,
637 .supports_autosuspend = 1,
638 .disable_hub_initiated_lpm = 1,
639 };
640
641 module_usb_driver(qmi_wwan_driver);
642
643 MODULE_AUTHOR("Bjørn Mork <bjorn@mork.no>");
644 MODULE_DESCRIPTION("Qualcomm MSM Interface (QMI) WWAN driver");
645 MODULE_LICENSE("GPL");
This page took 0.105734 seconds and 4 git commands to generate.