drivers/net/wireless/Kconfig

   1 #
   2 # Wireless LAN device configuration
   3 #
   4
   5 menuconfig WLAN
   6         bool "Wireless LAN"
   7         depends on !S390
   8         depends on NET
   9         select WIRELESS
  10         default y
  11         ---help---
  12           This section contains all the pre 802.11 and 802.11 wireless
  13           device drivers. For a complete list of drivers and documentation
  14           on them refer to the wireless wiki:
  15
  16           http://wireless.kernel.org/en/users/Drivers
  17
  18 if WLAN
  19
  20 config PCMCIA_RAYCS
  21         tristate "Aviator/Raytheon 2.4GHz wireless support"
  22         depends on PCMCIA
  23         select WIRELESS_EXT
  24         select WEXT_SPY
  25         select WEXT_PRIV
  26         ---help---
  27           Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
  28           (PC-card) wireless Ethernet networking card to your computer.
  29           Please read the file <file:Documentation/networking/ray_cs.txt> for
  30           details.
  31
  32           To compile this driver as a module, choose M here: the module will be
  33           called ray_cs.  If unsure, say N.
  34
  35 config LIBERTAS_THINFIRM
  36         tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
  37         depends on MAC80211
  38         select FW_LOADER
  39         ---help---
  40           A library for Marvell Libertas 8xxx devices using thinfirm.
  41
  42 config LIBERTAS_THINFIRM_DEBUG
  43         bool "Enable full debugging output in the Libertas thin firmware module."
  44         depends on LIBERTAS_THINFIRM
  45         ---help---
  46           Debugging support.
  47
  48 config LIBERTAS_THINFIRM_USB
  49         tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
  50         depends on LIBERTAS_THINFIRM && USB
  51         ---help---
  52           A driver for Marvell Libertas 8388 USB devices using thinfirm.
  53
  54 config AIRO
  55         tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
  56         depends on ISA_DMA_API && (PCI || BROKEN)
  57         select WIRELESS_EXT
  58         select CRYPTO
  59         select WEXT_SPY
  60         select WEXT_PRIV
  61         ---help---
  62           This is the standard Linux driver to support Cisco/Aironet ISA and
  63           PCI 802.11 wireless cards.
  64           It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
  65           - with or without encryption) as well as card before the Cisco
  66           acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
  67
  68           This driver support both the standard Linux Wireless Extensions
  69           and Cisco proprietary API, so both the Linux Wireless Tools and the
  70           Cisco Linux utilities can be used to configure the card.
  71
  72           The driver can be compiled as a module and will be named "airo".
  73
  74 config ATMEL
  75       tristate "Atmel at76c50x chipset  802.11b support"
  76       depends on (PCI || PCMCIA)
  77       select WIRELESS_EXT
  78       select WEXT_PRIV
  79       select FW_LOADER
  80       select CRC32
  81        ---help---
  82         A driver 802.11b wireless cards based on the Atmel fast-vnet
  83         chips. This driver supports standard Linux wireless extensions.
  84
  85         Many  cards based on this chipset do not have flash memory
  86         and need their firmware loaded at start-up. If yours is
  87         one of these, you will need to provide a firmware image
  88         to be loaded into the card by the driver. The Atmel
  89         firmware package can be downloaded from
  90         <http://www.thekelleys.org.uk/atmel>
  91
  92 config PCI_ATMEL
  93       tristate "Atmel at76c506 PCI cards"
  94       depends on ATMEL && PCI
  95        ---help---
  96         Enable support for PCI and mini-PCI cards containing the
  97         Atmel at76c506 chip.
  98
  99 config PCMCIA_ATMEL
 100         tristate "Atmel at76c502/at76c504 PCMCIA cards"
 101         depends on ATMEL && PCMCIA
 102         select WIRELESS_EXT
 103         select FW_LOADER
 104         select CRC32
 105         ---help---
 106           Enable support for PCMCIA cards containing the
 107           Atmel at76c502 and at76c504 chips.
 108
 109 config AT76C50X_USB
 110         tristate "Atmel at76c503/at76c505/at76c505a USB cards"
 111         depends on MAC80211 && USB
 112         select FW_LOADER
 113         ---help---
 114           Enable support for USB Wireless devices using Atmel at76c503,
 115           at76c505 or at76c505a chips.
 116
 117 config AIRO_CS
 118         tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
 119         depends on PCMCIA && (BROKEN || !M32R)
 120         select WIRELESS_EXT
 121         select WEXT_SPY
 122         select WEXT_PRIV
 123         select CRYPTO
 124         select CRYPTO_AES
 125         ---help---
 126           This is the standard Linux driver to support Cisco/Aironet PCMCIA
 127           802.11 wireless cards.  This driver is the same as the Aironet
 128           driver part of the Linux Pcmcia package.
 129           It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
 130           - with or without encryption) as well as card before the Cisco
 131           acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
 132           supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
 133           802.11b cards.
 134
 135           This driver support both the standard Linux Wireless Extensions
 136           and Cisco proprietary API, so both the Linux Wireless Tools and the
 137           Cisco Linux utilities can be used to configure the card.
 138
 139 config PCMCIA_WL3501
 140         tristate "Planet WL3501 PCMCIA cards"
 141         depends on PCMCIA
 142         select WIRELESS_EXT
 143         select WEXT_SPY
 144         help
 145           A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
 146           It has basic support for Linux wireless extensions and initial
 147           micro support for ethtool.
 148
 149 config PRISM54
 150         tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
 151         depends on PCI
 152         select WIRELESS_EXT
 153         select WEXT_SPY
 154         select WEXT_PRIV
 155         select FW_LOADER
 156         ---help---
 157           This enables support for FullMAC PCI/Cardbus prism54 devices. This
 158           driver is now deprecated in favor for the SoftMAC driver, p54pci.
 159           p54pci supports FullMAC PCI/Cardbus devices as well.
 160
 161           For more information refer to the p54 wiki:
 162
 163           http://wireless.kernel.org/en/users/Drivers/p54
 164
 165           Note: You need a motherboard with DMA support to use any of these cards
 166
 167           When built as module you get the module prism54
 168
 169 config USB_ZD1201
 170         tristate "USB ZD1201 based Wireless device support"
 171         depends on USB
 172         select WIRELESS_EXT
 173         select WEXT_PRIV
 174         select FW_LOADER
 175         ---help---
 176           Say Y if you want to use wireless LAN adapters based on the ZyDAS
 177           ZD1201 chip.
 178
 179           This driver makes the adapter appear as a normal Ethernet interface,
 180           typically on wlan0.
 181
 182           The zd1201 device requires external firmware to be loaded.
 183           This can be found at http://linux-lc100020.sourceforge.net/
 184
 185           To compile this driver as a module, choose M here: the
 186           module will be called zd1201.
 187
 188 config USB_NET_RNDIS_WLAN
 189         tristate "Wireless RNDIS USB support"
 190         depends on USB
 191         depends on CFG80211
 192         select USB_USBNET
 193         select USB_NET_CDCETHER
 194         select USB_NET_RNDIS_HOST
 195         ---help---
 196           This is a driver for wireless RNDIS devices.
 197           These are USB based adapters found in devices such as:
 198
 199           Buffalo WLI-U2-KG125S
 200           U.S. Robotics USR5421
 201           Belkin F5D7051
 202           Linksys WUSB54GSv2
 203           Linksys WUSB54GSC
 204           Asus WL169gE
 205           Eminent EM4045
 206           BT Voyager 1055
 207           Linksys WUSB54GSv1
 208           U.S. Robotics USR5420
 209           BUFFALO WLI-USB-G54
 210
 211           All of these devices are based on Broadcom 4320 chip which is the
 212           only wireless RNDIS chip known to date.
 213
 214           If you choose to build a module, it'll be called rndis_wlan.
 215
 216 source "drivers/net/wireless/rtl818x/Kconfig"
 217
 218 config ADM8211
 219         tristate "ADMtek ADM8211 support"
 220         depends on MAC80211 && PCI
 221         select CRC32
 222         select EEPROM_93CX6
 223         ---help---
 224           This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
 225           These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
 226
 227           Xterasys Cardbus XN-2411b
 228           Blitz NetWave Point PC
 229           TrendNet 221pc
 230           Belkin F5D6001
 231           SMC 2635W
 232           Linksys WPC11 v1
 233           Fiberline FL-WL-200X
 234           3com Office Connect (3CRSHPW796)
 235           Corega WLPCIB-11
 236           SMC 2602W V2 EU
 237           D-Link DWL-520 Revision C
 238
 239           However, some of these cards have been replaced with other chips
 240           like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
 241           the Ralink RT2400 (SMC2635W) without a model number change.
 242
 243           Thanks to Infineon-ADMtek for their support of this driver.
 244
 245 config MAC80211_HWSIM
 246         tristate "Simulated radio testing tool for mac80211"
 247         depends on MAC80211
 248         ---help---
 249           This driver is a developer testing tool that can be used to test
 250           IEEE 802.11 networking stack (mac80211) functionality. This is not
 251           needed for normal wireless LAN usage and is only for testing. See
 252           Documentation/networking/mac80211_hwsim for more information on how
 253           to use this tool.
 254
 255           To compile this driver as a module, choose M here: the module will be
 256           called mac80211_hwsim.  If unsure, say N.
 257
 258 config MWL8K
 259         tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
 260         depends on MAC80211 && PCI
 261         ---help---
 262           This driver supports Marvell TOPDOG 802.11 wireless cards.
 263
 264           To compile this driver as a module, choose M here: the module
 265           will be called mwl8k.  If unsure, say N.
 266
 267 source "drivers/net/wireless/ath/Kconfig"
 268 source "drivers/net/wireless/b43/Kconfig"
 269 source "drivers/net/wireless/b43legacy/Kconfig"
 270 source "drivers/net/wireless/brcm80211/Kconfig"
 271 source "drivers/net/wireless/hostap/Kconfig"
 272 source "drivers/net/wireless/ipw2x00/Kconfig"
 273 source "drivers/net/wireless/iwlwifi/Kconfig"
 274 source "drivers/net/wireless/iwlegacy/Kconfig"
 275 source "drivers/net/wireless/libertas/Kconfig"
 276 source "drivers/net/wireless/orinoco/Kconfig"
 277 source "drivers/net/wireless/p54/Kconfig"
 278 source "drivers/net/wireless/rt2x00/Kconfig"
 279 source "drivers/net/wireless/rtlwifi/Kconfig"
 280 source "drivers/net/wireless/ti/Kconfig"
 281 source "drivers/net/wireless/zd1211rw/Kconfig"
 282 source "drivers/net/wireless/mwifiex/Kconfig"
 283 source "drivers/net/wireless/cw1200/Kconfig"
 284
 285 endif # WLAN