drivers/net/wireless/Kconfig

   1 #
   2 # Wireless LAN device configuration
   3 #
   4
   5 menuconfig WLAN
   6         bool "Wireless LAN"
   7         depends on !S390
   8         default y
   9         ---help---
  10           This section contains all the pre 802.11 and 802.11 wireless
  11           device drivers. For a complete list of drivers and documentation
  12           on them refer to the wireless wiki:
  13
  14           http://wireless.kernel.org/en/users/Drivers
  15
  16 if WLAN
  17
  18 menuconfig WLAN_PRE80211
  19         bool "Wireless LAN (pre-802.11)"
  20         depends on NETDEVICES
  21         ---help---
  22           Say Y if you have any pre-802.11 wireless LAN hardware.
  23
  24           This option does not affect the kernel build, it only
  25           lets you choose drivers.
  26
  27 config STRIP
  28         tristate "STRIP (Metricom starmode radio IP)"
  29         depends on INET && WLAN_PRE80211
  30         select WIRELESS_EXT
  31         ---help---
  32           Say Y if you have a Metricom radio and intend to use Starmode Radio
  33           IP. STRIP is a radio protocol developed for the MosquitoNet project
  34           (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
  35           traffic using Metricom radios.  Metricom radios are small, battery
  36           powered, 100kbit/sec packet radio transceivers, about the size and
  37           weight of a cellular telephone. (You may also have heard them called
  38           "Metricom modems" but we avoid the term "modem" because it misleads
  39           many people into thinking that you can plug a Metricom modem into a
  40           phone line and use it as a modem.)
  41
  42           You can use STRIP on any Linux machine with a serial port, although
  43           it is obviously most useful for people with laptop computers. If you
  44           think you might get a Metricom radio in the future, there is no harm
  45           in saying Y to STRIP now, except that it makes the kernel a bit
  46           bigger.
  47
  48           To compile this as a module, choose M here: the module will be
  49           called strip.
  50
  51 config ARLAN
  52         tristate "Aironet Arlan 655 & IC2200 DS support"
  53         depends on ISA && !64BIT && WLAN_PRE80211
  54         select WIRELESS_EXT
  55         ---help---
  56           Aironet makes Arlan, a class of wireless LAN adapters. These use the
  57           www.Telxon.com chip, which is also used on several similar cards.
  58           This driver is tested on the 655 and IC2200 series cards. Look at
  59           <http://www.ylenurme.ee/~elmer/655/> for the latest information.
  60
  61           The driver is built as two modules, arlan and arlan-proc. The latter
  62           is the /proc interface and is not needed most of time.
  63
  64           On some computers the card ends up in non-valid state after some
  65           time. Use a ping-reset script to clear it.
  66
  67 config WAVELAN
  68         tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
  69         depends on ISA && WLAN_PRE80211
  70         select WIRELESS_EXT
  71         ---help---
  72           The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
  73           a Radio LAN (wireless Ethernet-like Local Area Network) using the
  74           radio frequencies 900 MHz and 2.4 GHz.
  75
  76           If you want to use an ISA WaveLAN card under Linux, say Y and read
  77           the Ethernet-HOWTO, available from
  78           <http://www.tldp.org/docs.html#howto>. Some more specific
  79           information is contained in
  80           <file:Documentation/networking/wavelan.txt> and in the source code
  81           <file:drivers/net/wireless/wavelan.p.h>.
  82
  83           You will also need the wireless tools package available from
  84           <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
  85           Please read the man pages contained therein.
  86
  87           To compile this driver as a module, choose M here: the module will be
  88           called wavelan.
  89
  90 config PCMCIA_WAVELAN
  91         tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
  92         depends on PCMCIA && WLAN_PRE80211
  93         select WIRELESS_EXT
  94         help
  95           Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
  96           (PC-card) wireless Ethernet networking card to your computer.  This
  97           driver is for the non-IEEE-802.11 Wavelan cards.
  98
  99           To compile this driver as a module, choose M here: the module will be
 100           called wavelan_cs.  If unsure, say N.
 101
 102 config PCMCIA_NETWAVE
 103         tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
 104         depends on PCMCIA && WLAN_PRE80211
 105         select WIRELESS_EXT
 106         help
 107           Say Y here if you intend to attach this type of PCMCIA (PC-card)
 108           wireless Ethernet networking card to your computer.
 109
 110           To compile this driver as a module, choose M here: the module will be
 111           called netwave_cs.  If unsure, say N.
 112
 113
 114 menuconfig WLAN_80211
 115         bool "Wireless LAN (IEEE 802.11)"
 116         depends on NETDEVICES
 117         ---help---
 118           Say Y if you have any 802.11 wireless LAN hardware.
 119
 120           This option does not affect the kernel build, it only
 121           lets you choose drivers.
 122
 123 config PCMCIA_RAYCS
 124         tristate "Aviator/Raytheon 2.4GHz wireless support"
 125         depends on PCMCIA && WLAN_80211
 126         select WIRELESS_EXT
 127         ---help---
 128           Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
 129           (PC-card) wireless Ethernet networking card to your computer.
 130           Please read the file <file:Documentation/networking/ray_cs.txt> for
 131           details.
 132
 133           To compile this driver as a module, choose M here: the module will be
 134           called ray_cs.  If unsure, say N.
 135
 136 config LIBERTAS
 137         tristate "Marvell 8xxx Libertas WLAN driver support"
 138         depends on WLAN_80211
 139         select WIRELESS_EXT
 140         select LIB80211
 141         select FW_LOADER
 142         ---help---
 143           A library for Marvell Libertas 8xxx devices.
 144
 145 config LIBERTAS_USB
 146         tristate "Marvell Libertas 8388 USB 802.11b/g cards"
 147         depends on LIBERTAS && USB
 148         ---help---
 149           A driver for Marvell Libertas 8388 USB devices.
 150
 151 config LIBERTAS_CS
 152         tristate "Marvell Libertas 8385 CompactFlash 802.11b/g cards"
 153         depends on LIBERTAS && PCMCIA
 154         select FW_LOADER
 155         ---help---
 156           A driver for Marvell Libertas 8385 CompactFlash devices.
 157
 158 config LIBERTAS_SDIO
 159         tristate "Marvell Libertas 8385/8686/8688 SDIO 802.11b/g cards"
 160         depends on LIBERTAS && MMC
 161         ---help---
 162           A driver for Marvell Libertas 8385/8686/8688 SDIO devices.
 163
 164 config LIBERTAS_SPI
 165         tristate "Marvell Libertas 8686 SPI 802.11b/g cards"
 166         depends on LIBERTAS && SPI
 167         ---help---
 168           A driver for Marvell Libertas 8686 SPI devices.
 169
 170 config LIBERTAS_DEBUG
 171         bool "Enable full debugging output in the Libertas module."
 172         depends on LIBERTAS
 173         ---help---
 174           Debugging support.
 175
 176 config LIBERTAS_THINFIRM
 177         tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
 178         depends on WLAN_80211 && MAC80211
 179         select FW_LOADER
 180         ---help---
 181           A library for Marvell Libertas 8xxx devices using thinfirm.
 182
 183 config LIBERTAS_THINFIRM_USB
 184         tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
 185         depends on LIBERTAS_THINFIRM && USB
 186         ---help---
 187           A driver for Marvell Libertas 8388 USB devices using thinfirm.
 188
 189 config AIRO
 190         tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
 191         depends on ISA_DMA_API && WLAN_80211 && (PCI || BROKEN)
 192         select WIRELESS_EXT
 193         select CRYPTO
 194         ---help---
 195           This is the standard Linux driver to support Cisco/Aironet ISA and
 196           PCI 802.11 wireless cards.
 197           It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
 198           - with or without encryption) as well as card before the Cisco
 199           acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
 200
 201           This driver support both the standard Linux Wireless Extensions
 202           and Cisco proprietary API, so both the Linux Wireless Tools and the
 203           Cisco Linux utilities can be used to configure the card.
 204
 205           The driver can be compiled as a module and will be named "airo".
 206
 207 config ATMEL
 208       tristate "Atmel at76c50x chipset  802.11b support"
 209       depends on (PCI || PCMCIA) && WLAN_80211
 210       select WIRELESS_EXT
 211       select FW_LOADER
 212       select CRC32
 213        ---help---
 214         A driver 802.11b wireless cards based on the Atmel fast-vnet
 215         chips. This driver supports standard Linux wireless extensions.
 216
 217         Many  cards based on this chipset do not have flash memory
 218         and need their firmware loaded at start-up. If yours is
 219         one of these, you will need to provide a firmware image
 220         to be loaded into the card by the driver. The Atmel
 221         firmware package can be downloaded from
 222         <http://www.thekelleys.org.uk/atmel>
 223
 224 config PCI_ATMEL
 225       tristate "Atmel at76c506 PCI cards"
 226       depends on ATMEL && PCI
 227        ---help---
 228         Enable support for PCI and mini-PCI cards containing the
 229         Atmel at76c506 chip.
 230
 231 config PCMCIA_ATMEL
 232         tristate "Atmel at76c502/at76c504 PCMCIA cards"
 233         depends on ATMEL && PCMCIA
 234         select WIRELESS_EXT
 235         select FW_LOADER
 236         select CRC32
 237         ---help---
 238           Enable support for PCMCIA cards containing the
 239           Atmel at76c502 and at76c504 chips.
 240
 241 config AT76C50X_USB
 242         tristate "Atmel at76c503/at76c505/at76c505a USB cards"
 243         depends on MAC80211 && WLAN_80211 && USB
 244         select FW_LOADER
 245         ---help---
 246           Enable support for USB Wireless devices using Atmel at76c503,
 247           at76c505 or at76c505a chips.
 248
 249 config AIRO_CS
 250         tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
 251         depends on PCMCIA && (BROKEN || !M32R) && WLAN_80211
 252         select WIRELESS_EXT
 253         select CRYPTO
 254         select CRYPTO_AES
 255         ---help---
 256           This is the standard Linux driver to support Cisco/Aironet PCMCIA
 257           802.11 wireless cards.  This driver is the same as the Aironet
 258           driver part of the Linux Pcmcia package.
 259           It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
 260           - with or without encryption) as well as card before the Cisco
 261           acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
 262           supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
 263           802.11b cards.
 264
 265           This driver support both the standard Linux Wireless Extensions
 266           and Cisco proprietary API, so both the Linux Wireless Tools and the
 267           Cisco Linux utilities can be used to configure the card.
 268
 269 config PCMCIA_WL3501
 270       tristate "Planet WL3501 PCMCIA cards"
 271       depends on EXPERIMENTAL && PCMCIA && WLAN_80211
 272       select WIRELESS_EXT
 273        ---help---
 274          A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
 275          It has basic support for Linux wireless extensions and initial
 276          micro support for ethtool.
 277
 278 config PRISM54
 279         tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
 280         depends on PCI && EXPERIMENTAL && WLAN_80211
 281         select WIRELESS_EXT
 282         select FW_LOADER
 283         ---help---
 284           This enables support for FullMAC PCI/Cardbus prism54 devices. This
 285           driver is now deprecated in favor for the SoftMAC driver, p54pci.
 286           p54pci supports FullMAC PCI/Cardbus devices as well. For details on
 287           the scheduled removal of this driver on the kernel see the feature
 288           removal schedule:
 289
 290           Documentation/feature-removal-schedule.txt
 291
 292           For more information refer to the p54 wiki:
 293
 294           http://wireless.kernel.org/en/users/Drivers/p54
 295
 296           Note: You need a motherboard with DMA support to use any of these cards
 297
 298           When built as module you get the module prism54
 299
 300 config USB_ZD1201
 301         tristate "USB ZD1201 based Wireless device support"
 302         depends on USB && WLAN_80211
 303         select WIRELESS_EXT
 304         select FW_LOADER
 305         ---help---
 306           Say Y if you want to use wireless LAN adapters based on the ZyDAS
 307           ZD1201 chip.
 308
 309           This driver makes the adapter appear as a normal Ethernet interface,
 310           typically on wlan0.
 311
 312           The zd1201 device requires external firmware to be loaded.
 313           This can be found at http://linux-lc100020.sourceforge.net/
 314
 315           To compile this driver as a module, choose M here: the
 316           module will be called zd1201.
 317
 318 config USB_NET_RNDIS_WLAN
 319         tristate "Wireless RNDIS USB support"
 320         depends on USB && WLAN_80211 && EXPERIMENTAL
 321         depends on CFG80211
 322         select USB_USBNET
 323         select USB_NET_CDCETHER
 324         select USB_NET_RNDIS_HOST
 325         ---help---
 326           This is a driver for wireless RNDIS devices.
 327           These are USB based adapters found in devices such as:
 328
 329           Buffalo WLI-U2-KG125S
 330           U.S. Robotics USR5421
 331           Belkin F5D7051
 332           Linksys WUSB54GSv2
 333           Linksys WUSB54GSC
 334           Asus WL169gE
 335           Eminent EM4045
 336           BT Voyager 1055
 337           Linksys WUSB54GSv1
 338           U.S. Robotics USR5420
 339           BUFFALO WLI-USB-G54
 340
 341           All of these devices are based on Broadcom 4320 chip which is the
 342           only wireless RNDIS chip known to date.
 343
 344           If you choose to build a module, it'll be called rndis_wlan.
 345
 346 config RTL8180
 347         tristate "Realtek 8180/8185 PCI support"
 348         depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
 349         select EEPROM_93CX6
 350         ---help---
 351           This is a driver for RTL8180 and RTL8185 based cards.
 352           These are PCI based chips found in cards such as:
 353
 354           (RTL8185 802.11g)
 355           A-Link WL54PC
 356
 357           (RTL8180 802.11b)
 358           Belkin F5D6020 v3
 359           Belkin F5D6020 v3
 360           Dlink DWL-610
 361           Dlink DWL-510
 362           Netgear MA521
 363           Level-One WPC-0101
 364           Acer Aspire 1357 LMi
 365           VCTnet PC-11B1
 366           Ovislink AirLive WL-1120PCM
 367           Mentor WL-PCI
 368           Linksys WPC11 v4
 369           TrendNET TEW-288PI
 370           D-Link DWL-520 Rev D
 371           Repotec RP-WP7126
 372           TP-Link TL-WN250/251
 373           Zonet ZEW1000
 374           Longshine LCS-8031-R
 375           HomeLine HLW-PCC200
 376           GigaFast WF721-AEX
 377           Planet WL-3553
 378           Encore ENLWI-PCI1-NT
 379           TrendNET TEW-266PC
 380           Gigabyte GN-WLMR101
 381           Siemens-fujitsu Amilo D1840W
 382           Edimax EW-7126
 383           PheeNet WL-11PCIR
 384           Tonze PC-2100T
 385           Planet WL-8303
 386           Dlink DWL-650 v M1
 387           Edimax EW-7106
 388           Q-Tec 770WC
 389           Topcom Skyr@cer 4011b
 390           Roper FreeLan 802.11b (edition 2004)
 391           Wistron Neweb Corp CB-200B
 392           Pentagram HorNET
 393           QTec 775WC
 394           TwinMOS Booming B Series
 395           Micronet SP906BB
 396           Sweex LC700010
 397           Surecom EP-9428
 398           Safecom SWLCR-1100
 399
 400           Thanks to Realtek for their support!
 401
 402 config RTL8187
 403         tristate "Realtek 8187 and 8187B USB support"
 404         depends on MAC80211 && USB && WLAN_80211
 405         select EEPROM_93CX6
 406         ---help---
 407           This is a driver for RTL8187 and RTL8187B based cards.
 408           These are USB based chips found in devices such as:
 409
 410           Netgear WG111v2
 411           Level 1 WNC-0301USB
 412           Micronet SP907GK V5
 413           Encore ENUWI-G2
 414           Trendnet TEW-424UB
 415           ASUS P5B Deluxe/P5K Premium motherboards
 416           Toshiba Satellite Pro series of laptops
 417           Asus Wireless Link
 418           Linksys WUSB54GC-EU v2
 419             (v1 = rt73usb; v3 is rt2070-based,
 420              use staging/rt3070 or try rt2800usb)
 421
 422           Thanks to Realtek for their support!
 423
 424 # If possible, automatically enable LEDs for RTL8187.
 425
 426 config RTL8187_LEDS
 427         bool
 428         depends on RTL8187 && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = RTL8187)
 429         default y
 430
 431 config ADM8211
 432         tristate "ADMtek ADM8211 support"
 433         depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
 434         select CRC32
 435         select EEPROM_93CX6
 436         ---help---
 437           This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
 438           These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
 439
 440           Xterasys Cardbus XN-2411b
 441           Blitz NetWave Point PC
 442           TrendNet 221pc
 443           Belkin F5D6001
 444           SMC 2635W
 445           Linksys WPC11 v1
 446           Fiberline FL-WL-200X
 447           3com Office Connect (3CRSHPW796)
 448           Corega WLPCIB-11
 449           SMC 2602W V2 EU
 450           D-Link DWL-520 Revision C
 451
 452           However, some of these cards have been replaced with other chips
 453           like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
 454           the Ralink RT2400 (SMC2635W) without a model number change.
 455
 456           Thanks to Infineon-ADMtek for their support of this driver.
 457
 458 config MAC80211_HWSIM
 459         tristate "Simulated radio testing tool for mac80211"
 460         depends on MAC80211 && WLAN_80211
 461         ---help---
 462           This driver is a developer testing tool that can be used to test
 463           IEEE 802.11 networking stack (mac80211) functionality. This is not
 464           needed for normal wireless LAN usage and is only for testing. See
 465           Documentation/networking/mac80211_hwsim for more information on how
 466           to use this tool.
 467
 468           To compile this driver as a module, choose M here: the module will be
 469           called mac80211_hwsim.  If unsure, say N.
 470
 471 config MWL8K
 472         tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
 473         depends on MAC80211 && PCI && WLAN_80211 && EXPERIMENTAL
 474         ---help---
 475           This driver supports Marvell TOPDOG 802.11 wireless cards.
 476
 477           To compile this driver as a module, choose M here: the module
 478           will be called mwl8k.  If unsure, say N.
 479
 480 source "drivers/net/wireless/p54/Kconfig"
 481 source "drivers/net/wireless/ath/Kconfig"
 482 source "drivers/net/wireless/ipw2x00/Kconfig"
 483 source "drivers/net/wireless/iwlwifi/Kconfig"
 484 source "drivers/net/wireless/hostap/Kconfig"
 485 source "drivers/net/wireless/b43/Kconfig"
 486 source "drivers/net/wireless/b43legacy/Kconfig"
 487 source "drivers/net/wireless/zd1211rw/Kconfig"
 488 source "drivers/net/wireless/rt2x00/Kconfig"
 489 source "drivers/net/wireless/orinoco/Kconfig"
 490 source "drivers/net/wireless/wl12xx/Kconfig"
 491 source "drivers/net/wireless/iwmc3200wifi/Kconfig"
 492
 493 endif # WLAN