drivers/net/wireless/ath/ath9k/Kconfig

   1 config ATH9K_HW
   2         tristate
   3 config ATH9K_COMMON
   4         tristate
   5         select ATH_COMMON
   6 config ATH9K_DFS_DEBUGFS
   7         def_bool y
   8         depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED
   9
  10 config ATH9K_BTCOEX_SUPPORT
  11         bool "Atheros bluetooth coexistence support"
  12         depends on (ATH9K || ATH9K_HTC)
  13         default y
  14         ---help---
  15           Say Y, if you want to use the ath9k/ath9k_htc radios together with
  16           Bluetooth modules in the same system.
  17
  18 config ATH9K
  19         tristate "Atheros 802.11n wireless cards support"
  20         depends on MAC80211 && HAS_DMA
  21         select ATH9K_HW
  22         select MAC80211_LEDS
  23         select LEDS_CLASS
  24         select NEW_LEDS
  25         select ATH9K_COMMON
  26         ---help---
  27           This module adds support for wireless adapters based on
  28           Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
  29           of chipsets. For a specific list of supported external
  30           cards, laptops that already ship with these cards and
  31           APs that come with these cards refer to ath9k wiki
  32           products page:
  33
  34           http://wireless.kernel.org/en/users/Drivers/ath9k/products
  35
  36           If you choose to build a module, it'll be called ath9k.
  37
  38 config ATH9K_PCI
  39         bool "Atheros ath9k PCI/PCIe bus support"
  40         default y
  41         depends on ATH9K && PCI
  42         ---help---
  43           This option enables the PCI bus support in ath9k.
  44
  45           Say Y, if you have a compatible PCI/PCIe wireless card.
  46
  47 config ATH9K_AHB
  48         bool "Atheros ath9k AHB bus support"
  49         depends on ATH9K
  50         default n
  51         ---help---
  52           This option enables the AHB bus support in ath9k.
  53
  54           Say Y, if you have a SoC with a compatible built-in
  55           wireless MAC. Say N if unsure.
  56
  57 config ATH9K_DEBUGFS
  58         bool "Atheros ath9k debugging"
  59         depends on ATH9K && DEBUG_FS
  60         select MAC80211_DEBUGFS
  61         select RELAY
  62         ---help---
  63           Say Y, if you need access to ath9k's statistics for
  64           interrupts, rate control, etc.
  65
  66           Also required for changing debug message flags at run time.
  67
  68 config ATH9K_STATION_STATISTICS
  69         bool "Detailed station statistics"
  70         depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS
  71         select MAC80211_DEBUGFS
  72         default n
  73         ---help---
  74           This option enables detailed statistics for association stations.
  75
  76 config ATH9K_DFS_CERTIFIED
  77         bool "Atheros DFS support for certified platforms"
  78         depends on ATH9K && CFG80211_CERTIFICATION_ONUS
  79         default n
  80         ---help---
  81           This option enables DFS support for initiating radiation on
  82           ath9k. There is no way to dynamically detect if a card was DFS
  83           certified and as such this is left as a build time option. This
  84           option should only be enabled by system integrators that can
  85           guarantee that all the platforms that their kernel will run on
  86           have obtained appropriate regulatory body certification for a
  87           respective Atheros card by using ath9k on the target shipping
  88           platforms.
  89
  90           This is currently only a placeholder for future DFS support,
  91           as DFS support requires more components that still need to be
  92           developed. At this point enabling this option won't do anything
  93           except increase code size.
  94
  95 config ATH9K_TX99
  96         bool "Atheros ath9k TX99 testing support"
  97         depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS
  98         default n
  99         ---help---
 100           Say N. This should only be enabled on systems undergoing
 101           certification testing and evaluation in a controlled environment.
 102           Enabling this will only enable TX99 support, all other modes of
 103           operation will be disabled.
 104
 105           TX99 support enables Specific Absorption Rate (SAR) testing.
 106           SAR is the unit of measurement for the amount of radio frequency(RF)
 107           absorbed by the body when using a wireless device. The RF exposure
 108           limits used are expressed in the terms of SAR, which is a measure
 109           of the electric and magnetic field strength and power density for
 110           transmitters operating at frequencies from 300 kHz to 100 GHz.
 111           Regulatory bodies around the world require that wireless device
 112           be evaluated to meet the RF exposure limits set forth in the
 113           governmental SAR regulations.
 114
 115 config ATH9K_WOW
 116         bool "Wake on Wireless LAN support (EXPERIMENTAL)"
 117         depends on ATH9K && PM
 118         default n
 119         ---help---
 120           This option enables Wake on Wireless LAN support for certain cards.
 121           Currently, AR9462 is supported.
 122
 123 config ATH9K_RFKILL
 124         bool "Atheros ath9k rfkill support" if EXPERT
 125         depends on ATH9K
 126         depends on RFKILL=y || RFKILL=ATH9K
 127         default y
 128         help
 129           Say Y to have ath9k poll the RF-Kill GPIO every couple of
 130           seconds. Turn off to save power, but enable it if you have
 131           a platform that can toggle the RF-Kill GPIO.
 132
 133 config ATH9K_HTC
 134        tristate "Atheros HTC based wireless cards support"
 135        depends on USB && MAC80211
 136        select ATH9K_HW
 137        select MAC80211_LEDS
 138        select LEDS_CLASS
 139        select NEW_LEDS
 140        select ATH9K_COMMON
 141        ---help---
 142          Support for Atheros HTC based cards.
 143          Chipsets supported: AR9271
 144
 145          For more information: http://wireless.kernel.org/en/users/Drivers/ath9k_htc
 146
 147          The built module will be ath9k_htc.
 148
 149 config ATH9K_HTC_DEBUGFS
 150         bool "Atheros ath9k_htc debugging"
 151         depends on ATH9K_HTC && DEBUG_FS
 152         ---help---
 153           Say Y, if you need access to ath9k_htc's statistics.